Manual Title: Maintenance Manual

Manual No.:
VOOS Form:
Date 15th Jan 2021
Electrical Daily Checklist Revision V1.0
No. Of Pages 1 of 4

RIG I-37
Rig: Performed By: Signature：
(PDO 140)

Date: Chief Electrician: Signature：

Ite Result Result
Item to be checked Item Item to be checked
m (Y/N) Y/N
Check ground cable connections.
Mini Camp

Check if the AC in Transformer Room is

working or not.

Check which water pump is running and

VFD House
1 water pressure.
□pump#1 ____Kpa; □pump#2 ____Kpa;
If screens shows any alarm and Record
Check pressure of cooling system water
temperature of all 3 ACs in VFD.
pump.
AC#1: ____°C; AC#2: ____°C; AC#3:
_______Kpa;
____°C;
Check if all the flood lights are working or
Check if both air dryers are working or not
not.

Check if all ground cable connection and all

Check the status of H2S, LEL, Fire sensors
cable protector/ cover are in good condition.
Check if there’s any warning on Easygen.

Generator House Check any warnings on ABB drives.

Battery voltage of engines.

Check if the blowers are running or not for
Engine1 ___V; Engine2 ___V; Engine3
each ABB drives
___V; Engine4 ___V;

Air pressure on tanks. Check if there is any noise from BU blower

Tank1 ____Kpa; Tank2 ___ Kpa; fan
3
Check any noise and leak of two Air
Check how many BUs are working. _____
Compressors.
Record the temperature on VFD
transformers.
Check the status of the dryer.
PH#1: ____°C; PH#2: ____°C; PH#3:
____°C;
Visual Check if draining water valves are Check if any failure light of all soft starters
working properly. is on.
2 □Compressor#1 □Compressor#2
□airtank#1 □air dryer
Housekeeping and Check the ground cable
Drain water in air tank #2 connection.

Check if all lights are working or not

 Manual Title: Maintenance Manual
Manual No.:
VOOS Form:
Date 15th Jan 2021
Electrical Daily Checklist Revision V1.0
No. Of Pages 2 of 4

Ite Result Result

Item to be checked Item Item to be checked
m (Y/N) Y/N
Check all electrical equipment grounded.
Diesel Skid
Check if the daily diesel tank charging or
not. Both working or not. Any noise coming
from charging pumps or not

Check if all lights are working or not. Main trailer

4
Visual Check the ground cable connection.
Check TDS HPU motor no noise, no
shaking, no overheating. Clean if require.

Check if the oil level of TDS HPU is low.

Gas detector Check the main HPU motor no noise, no

shaking, and no overheating. Clean if
require.
Visual check all gas detector (H2S & LEL),
reading 0. If not, record the reading. Visual checking the encoders fixed on the
□Rig floor □Cellar □Shale Shaker □flow draw-works are in good condition, no
tank loose, no damage.
5
□Shaker tank □Suction Tank
Visual check all gas detector (H2S & LEL) in Check the DWS blower motor, no noise,
good condition, if dirty, clean. 7 no shaking.

Visual check all the cables in good

condition, no damaged. Arrange them if
require.
Visual check all the cables in good
Mud tank condition, no damaged. Arrange them if
require.
Visual check all lights are working well and
clean. Repair or clean if require.
□trip tank □shaker tank □intermediate
Visual check all lights are working well
tank □suction tank □brine tank □mixing
and clean, repair or clean if require.
tank
□reserve tank1 □reserve tank2 □water
tank
Visual check all the switches and button of
agitator control box in good condition, no Mud pump
loose, no broken.
6 Check all motors working well, no noise, Check blower motor, lube pump motor,
no shaking, and no overheating, clean if liner washer pump motor, no noise, no
require. shaking, and no overheating. Clean if
require.
8
Visual check all the cables in good
Check all the lights on the tanks. condition, no damaged. Arrange them if
require.
Visual check the stroke sensors fixed
properly and working well, no damaged.
 Manual Title: Maintenance Manual
Manual No.:
VOOS Form:
Date 15th Jan 2021
Electrical Daily Checklist Revision V1.0
No. Of Pages 3 of 4

Ite Result Result

Item to be checked Item Item to be checked
m (Y/N) Y/N
Visual check all lights are working well and Check ground cable connection.
clean, repair or clean if require.

Check the ground cable connection.

8
Rig floor

if there’s any damage on Iron Roughneck

cable, or any cable tie broken, or any cable
drop on the rig floor.
If IRN proximity sensor and it’s pigtail in
good condition.
Cellar pump/Centrifuge pump/Water pump if there’s any damage on TDS drag chain.
Get sling of manual tong away from drag
chain.
11
Visual check cellar pumps no running The stroke readings and battery juice of
without water. Stop it if no water. Choke Control Panel.
9
Visual check centrifuge pump/water pump Check if all the lights are working or not
are working well, cable no damaged, plugs
on the holder to avoid water.

Check the RT blower motor, no noise, no

shaking.
Visual check all the cables in good
CW condition, no damaged. Arrange them if
require.
Check if the cover to protect the screen from
sun/heat is in place or not.

Check if there is any deformation in CW

drag chain or any pipe caps left inside the Driller Cabin
drag chain
Check if oil pump is working properly and
noisy. Check if running AC is working properly,
10 noisy.

Check if oil level is low. 12 Check if all lights are working or not

Check if both cooling fans is working Check Passon system status to see if
properly and noisy. there’s any sensor is offline

Check all cameras’ working status

 Manual Title: Maintenance Manual
Manual No.:
VOOS Form:
Date 15th Jan 2021
Electrical Daily Checklist Revision V1.0
No. Of Pages 4 of 4

Ite Result Result

Item to be checked Item Item to be checked
m (Y/N) Y/N
Visual check all lights are working well and
clean, repair or clean if require.

PRS
Check if anything on the way of PRS
working.
13

OTHERS
Check if the battery switch is turned off or
not.
□Towerlight #1 □Towerlight #2
□Towerlight #3 □Towerlight #4 □fire
pump □Portable HPU
14