eWon modem

installation

65 | P a g e
Testing eWon connectivity
It is very important that to find out, if the IP address we have is a static or a dynamic/DHCP address.

Test the network with a PC.

Make sure the net card in the PC is configured for DHCP - Settings - Network & Internet - Ethernet – Change
adapter settings - Right click on network card - Properties - Internet Protocol Version 4 (TCP/IPv4) – and
check ”Obtain an IP address automatically + Obtain DNS server address automatically.”

Connect an ethernet cable to the 2nd WAN port

on the eWON Modem and connect it to the PC.
Test if the PC can connect to the Internet. You
must be able to connect to different Websites on
the internet to be sure that the connection works
(DHCP).

If you are not able to connect you need to use

static settings (next page).

If the network is not DHCP enabled, then the network administrator must provide network address details.

66 | P a g e
Static IP address

Ask the customer for network address details.

§ IP address
§ Subnet
§ Default gateway.

You must enter the address details. If with DNS Server customer must also provide the required information!

The IP network must NOT be part of the 192.168.1.XXX subnet. This subnet is reserved for DISA machine
network.

Test if the PC can connect to the Internet. You must be able to connect to different Websites on the internet to
be sure that the connection works. If the Internet works on the PC, then we must change configuration of
eWon modem. Please see guide for ”Configuration of eWon internet connection”.

67 | P a g e
Check IP address details
It´s very important that the address is NOT part of 192.168.1.XXX subnet. This subnet is reserved for DISA
machine network.

Control Panel - All Control Panel Items - Network Connections - Right click on network card - Status - Details

68 | P a g e
Connection diagram
The eWon modem is configured to have two LAN ports and two WAN ports.

LAN – Local connection

WAN - Internet connection

69 | P a g e
Connect to eWon modem
Give your PC IP address: 192.168.1.88 Subnet mask: 255.255.255.0

Connect PC to LAN port of the eWon, and open any Internet Browser (Chrome, Edge etc.).

Go to eWon web interface by entering the address, “http://192.168.1.242/”.

70 | P a g e
The eWON should prompt you for a login. Username and password are both “adm”, small letters!

Once logged in, the menu will appear as above picture.

71 | P a g e
Configuration of eWon internet connection
First you need to connect to the eWon modem, See “Connect to eWon modem”.

Click ”Wizards” in the header menu.

The page menu should’ve changed into this. Click “Internet” on the right.

Choose ”Ethernet INTERNET connection” in the drop-down menu. Have “Initialize configuration first” checked.
Click “Next>”.

72 | P a g e
Choose in the drop-down menu for Address Setup, whether connection is DHCP, Static or BootP.

If the IP address needs to be entered manually; choose Static and enter the required IP configuration in the
fields “IP Address”, ”Subnet Mask” (usually 255.255.255.0) and “Default Gateway”.
Change the DNS fields to 0.0.0.0 unless the customer has provided specific IPs to use.

Usually the customer network has a DHCP server that can automatically provide IP information to the eWON.
If DHCP is chosen the value fields will be unavailable and automatically filled out.

Click “Next>” to continue.

73 | P a g e
Leave ”Internet connection test” checked/Enabled. Click “Next>”.
The eWon will now attempt to establish an Internet connection.

If successful above screen will be the result.

If unsuccessful -> further troubleshooting from customers side is required.

Click “Next Wizard” to continue to configuring the Talk2M (VPN) connection.

74 | P a g e
Configure Talk2M
First you need to connect to the eWon modem, please see guide for “Connect to eWon modem”.

Within the Wizards guide, click “Talk2M” and choose “Register with ACTIVATION KEY”, and paste the activation
key delivered by RMS Support (Contact if missing!) and Click “Next>”.

Check if customer’s internet connection is through proxy – if not; leave all fields unchecked and click ”Next>”

75 | P a g e
The eWon will now connect and test to Talk2M and retrieve proper configuration. This will normally take
approximately 90 seconds. The following pages should appear like this. When finished Click ”Finish”.
This should return you to the main page – check that all status fields are green.

76 | P a g e