Srinivas Vuduthala
P h o n e : +91-9010713879. Em a il: srinivasvuduthala43@[Link]
Professional Summary:
6.8 years of Comprehensive experience in embedded system products validation and team
management, quality management, and customer issue management.
Exposure on Qualcomm, Infineon and Renesas chipsets with memory validation.
End-to-end (complete “V” cycle) experience in Systems Engineering practices, embedded software
validation, change management, and configuration management.
Good Experience on tools like CANoe, VT System, Control Desk, dSPACE , DOORS, JIRA.
Good Experience on SDLC & STLC Methodologies, APICE, Agile Methodologies.
Good Experience on HIL Bench Set up and Validation.
Experience with ASPICE, ISO 26262 standard
Good Knowledge of the requirement management standard process.
Proficiency in programming languages - C and CAPL.
Experience in AUTOSAR, DEM, and DCM Validation.
Experienced in automation scripting, functional& nonfunctional Diagnostic testing.
Participated in tear-down events and supported vehicle certification at different authorized
associations (ICAT, ARAI, & GARC).
Ability to prioritize multiple tasks and meets deadline.
Good analytical abilities, quick grasping power, zeal for learning new technologies/things.
An effective leader with expertise in building highly engaged and collaborative teams in India and
South Korea.
Work Experience:
Worked at Mobase Electronics India Private Limited, R&D Center-Hyderabad as Lead test engineer
from April 2021 to December 2024.
Worked at Verve Digital Technologies Private Limited-Pune as Software Engineer from June 2018
to March 2021.
Worked at REC, Affiliated to JNTUH as Faculty member from July 2012 to May 2018.
Worked at IIET, Affiliated to JNTUH as Faculty member from July 2010 to June 2012.
Technical Skills:
Programming Languages: Basic Verilog HDL, CAPL Scripting, Python basics.
Software and Environments: PCAN/PLIN, CANoe Pro, CAN Diva, Candela, VT System dSPACE
Control desk, Automation Desk, vTest Studio, Vehicle Spy.
Protocol: CAN, LIN, CAN FD, J1939, UDS, I2C, SPI, UART.
Standards: ISO 11898-1, ISO-14229, Functional safety -ISO 26262,
Debugger/Flashing Tools: Trace32, ET-Tool, Multilink, Kvaser, H-OTA.
Req/Config/Bug management tools: Confluence, ALM, JIRA.
STLC: Requirement analysis, test planning, Test case development, environment setup, test
execution, and test closure.
HIL Systems: Vector VT System, dSPACE, Control Desk, Automation desk
Methodologies: ASPICE-V-Model, AGILE.
Educational Qualification:
Master of Technology degree from CVR College of Engineering in VLSISD (VLSI System
Design), Hyderabad.
Bachelor of Technology degree from Nalla Malla Reddy Engineering College in ECE
(Electronics and Communication Engineering), Hyderabad.
Certifications:
Certified ISTQB Foundation Level.
Completed course on “Process sensors & Applications” by ATI-EPI, Govt of India.
Projects Undertaken
#1 Validation of Body Control Module (BCM) using HIL System. June 2023- December 2024
Client: Hyundai and Kia (HKMC)
Role: Vehicle /HIL Validation Engineer
Configuration Tool: CANoe, CANalyzer, dSPACE, Control Desk, Automation Desk.
Responsibilities:
Vehicle validation for M stage and pre-sop stages and after-market issues.
Coordinated with Korean colleagues for hardware change validations.
Developed Test Cases Using D-Space HIL
Performed the regression testing once after software issues fixed or debugged.
Performed Manual Testing and Identifying the appropriate Test cases.
Performing issue-based testing on fixed bugs and submitting the reports.
Performed the regression testing after bug fixes and providing the status
conducted Diagnostic functionality testing.
Interacted with customers on quality issues, Software/Hardware delivery schedules,
Safety plans, and Product testing, and addressed manufacturing issues.
Implemented HIL bench set up from scratch as per requirements for system-level testing.
Coordinated for certification validations at ICAT ARAI and GARC.
#2 FUSO SMK(CEEA) June 2022-December 2024
Client: MITSUBISHI FUSO TRUCK & BUS CORPORATION(MFTBC), Japan.
Role: Lead System Engineer
Configuration Tool: CANoe, CANalyzer, VT System, vTest Studio, kvaser leaf light v2
Responsibilities:
To Create test plan including requirement analysis to test case preparation and test execution
for all SMK components and its Diagnostics.
Find out requirements related to AUTOSAR, DEM and DCM from FUSO and ISO standards
in the project.
Coordinate with the FUSO Japan team regarding issues/clarification and changes in the
STR/SYR.
Implement formal review of technical requirements, plan and track the status by JIRA.
Assisted in creating and maintaining system documentation, including design specifications,
testing procedures, and requirement traceability matrices.
Complete system knowledge, Protocols knowledge and Architecture knowledge.
Achieved ECU-to-ECU flashing as per customer need.
Developed and implemented test automation, reduced test duration by 35%.
#3 Steering wheel switch(P6700) April 2021- September 2024
Client: Volvo LV trucks.
Role: Lead Test Engineer
Configuration Tool: CANoe, CANalyzer, VT System, vTest Studio, PCAN, PLIN.
Responsibilities:
Requirement analysis and test case review.
Test validation for all part numbers and uploading test and bug reports.
Regression testing for field issues and impact analysis for new releases.
Diagnostics validation for Signal error conditions
#4 HIL validation of Security &Cab Interface Module June 2022-December 2023
Client: Volvo Trucks.
Role: Lead Test Engineer (June 2022 to December 2023)
Configuration Tool: CANoe, CANalyzer, VT System (For HIL), vTest Studio, ET-Tool, Trace-32
Responsibilities:
Requirement analysis from SWES
Test Planning, Variant’s test management (Volvo, Renault and UD truck)
Coordinated with Korean colleagues for hardware change validations.
Software Qualification Testing, troubleshooting, and analysis tasks on various phases of
AUTOSAR architecture development, including integration and system testing.
Implemented HIL bench set up as per requirements for system-level testing.
#5 Steering Column Control Module April 2021-February 2022
Client: CANOO LV1, US.
Role: Validation Engineer
Configuration Tool: CANoe, CANalyzer, PCAN, PLIN
Responsibilities:
Assisted senior engineers in creating test cases by analyzing System requirements.
Supported the testing and validation of systems to verify compliance with requirements and
automotive safety standards.
Test Validation and bug reporting.
Involved in Test planning meetings.
Involved in developing all functional and non-functional and diagnostic test cases
#6 Power Window Switch Module September 2019-March 2021
Client: Daimler (for CANTER vehicle) Role:
Requirements/Validation Engineer
Configuration Tool: CANoe, CANalyzer, S32 Design Studio, PCAN, PLIN
Responsibilities:
Assisted senior engineers in defining, analyzing, and validating requirements for various
features in door and power window systems.
Supported the testing and validation of systems to verify compliance with requirements and
automotive safety standards.
Regression Testing for field issues and impact analysis for new releases.
Diagnostics validation for Signal error conditions
#7 Validation of IVI system June 2018 to August 2019
Client: Denso
Role: Validation Engineer
Configuration Tool: CANoe, CANalyzer, ICB.
Responsibilities:
Assisted senior engineers in creating test cases by analyzing System requirements.
Supported the testing and validation of systems to verify compliance with requirements and
automotive safety standards.
Test Validation and bug reporting.
Involved in developing all Test cases and their validation.
Languages known:
English, Hindi and Telugu.
Declaration:
I hereby declare that the above information is correct to the best of my knowledge& belief
