Specification
Ver.01f
iBS02 Specification and certification
iBS02 Series Sensor Beacon
Contents
1. Features ................................................................................................................................................. 1
2. PIR Performance ..................................................................................................................................... 2
3. Specification ........................................................................................................................................... 2
4. Dimension .............................................................................................................................................. 4
5. Packaging ............................................................................................................................................... 4
6. Certification ............................................................................................................................................ 5
7. Statement............................................................................................................................................... 5
8. CE Regulatory ......................................................................................................................................... 6
Revision History ........................................................................................................................................... 7
iBS02 is a BLE beacon with different sensor options. The BLE is a very low power 2.4G radio that can transmit
the beacon information efficiently. The typical beacon battery life is around 3 years in default settings for
different sensors.
1. Features
● ARM CortexTM-M3 32-bit processor ● Operating temperature: -20'C to 60'C
● Support BLE 4.2 and BLE 5 long range
● Powered with 2XCR2032 battery or external USB ● Certificate: FCC/IC/TELEC/CE
● Long battery life: 2-4 year in typical beacon setting Sensor
● Android APP for configuration ● iBS02M2: External on/off input through micro-USB
● Power on/off switch connector
● Sensor activity wake up mechanism to save power ● iBS02IR2: Infrared(IR) proximity sensor for short range
● Size: 55mmx47mmx6mm( height 18.5mm w/ PIR); detection below 50cm.
● Weight: 16g w/ 2XCR2032 battery ● iBS02PIR2: Passive Infrared Sensor for motion or
activity detection within 5M range RF
● 2.4GHz frequency band
● Maximum transmit power +5dB
● Receiver sensitivity: -97 dBm@1Mbps, 0.1% BER
1
Specification
Ver.01f
iBS02 Specification and certification
2. PIR Performance
PIR Detection Range PIR Detection Area
The detection zone is polarized so if a target enters zones +
and - at the same time, the signals are cancelled and can’t
be detected.
3. Specification
Absolute Maximum Rating
Supply Power Max. +5.5 Volt
Storage Temperature -20º to 70º Celsius
Voltage Ripple +-2%
Recommendable Operation Condition
Operating Temperature -20º to 60º Celsius
2
Specification
Ver.01f
iBS02 Specification and certification
Humidity Max 95%, Non condensing, relative humidity
VDD +5 Volt +- 5% by USB power or +3V by CR2032 battery
Average Current Consumption
(120 times/day of detected event) 17.5 uA*, in default 10s transmit period@125Kbps(long range).
iBS02IR2 18.8 uA*, in default 10s transmit period@1Mbps.
(120 times/day of detected event) 25.8 uA*, in default 10s transmit period@125Kbps(long range).
iBS02PIR2 13.2 uA*, in default 10s transmit period@1Mbps.
(120 times/day of detected event) 21.2 uA*, in default 10s transmit period@125Kbps(long range).
* Measured with CR2032 batteries.
Battery Life Simulation
iBS02M2 8.25uA*, in default 10s transmit period@1Mbps.
(120 times/day of detected event) 16.3 uA*, in default 10s transmit period@125Kbps(long range).
iBS02H2 9.45uA*, in default 10s transmit period@1Mbps.
BS02M2 4.9 yr*, in default 10s transmit period@1Mbps.
(120 times/day of detected event) 2.5 yr*, in default 10s transmit period@125Kbps(long range).
iBS02H2 4.3 yr*, in default 10s transmit period@1Mbps.
(120 times/day of detected event) 2.3 yr*, in default 10s transmit period@125Kbps(long range).
iBS02IR2 2.1 yr*, in default 10s transmit period@1Mbps.
(120 times/day of detected event) 1.6 yr*, in default 10s transmit period@125Kbps(long range).
iBS02PIR2 3.0 yr*, in default 10s transmit period@1Mbps.
(120 times/day of detected event) 1.9 yr*, in default 10s transmit period@125Kbps(long range).
* Calculated with 2 X CR2032 with 220mAH capacity. Considering the battery discharge characteristic, only 70% of capacity is used for calculation. This value is just for
reference and may be varied with component tolerance and different environments.
iBS02M2 Input Characteristic
Dry Contact VinL: close VinH:
open
Wet Contact VinL: 0-0.5VDC VinH:
2-50VDC
IR Sensor Characteristic
Detection distance 50cm: A4 size white paper
30cm: A4 size black paper
3
Specification
Ver.01f
iBS02 Specification and certification
PIR Sensor Characteristic
Detection distance 5M
Detection Range 94o X 82o
(Horizontal X Vertical)
Detection zone 64 zones
BLE RF Specification
Transmit Power Max.: 5dBm
RSSI Accuracy +- 4 dB@1Mbps
Receiver Sensibility -97 dBm @1Mbps, 0.1 %BER
-103dB @125Kbps, 0.1 %BER
Maximum Received Signal +4dBm @1Mbps, 0.1 %BER
>+5dBm @125Kbps, 0.1 %BER
Frequency band 2.400 – 2.483 GHz
Frequency Deviation +-350 kHz @1Mbps,
-260~310KHz @125Kbps
Antenna on board chip antenna
Range 30M in open space
4. Dimension
Dimensions L x W x H (mm) 55 x 47 x 6
5. Packaging
One packing box(size: 11cmX5.5cmx6.5cm) contains 10 units of iBS02PIR2 or 18 units of iBS02M2/iBS02H2/iBS02IR2.
10X or 18X
4
Specification
Ver.01f
iBS02 Specification and certification
6. Certification
Japan MIC Regulatory FCC Regulatory
211-180707 2AH2IIBM40R2
IC Regulatory
21379-IBM40R2
7. Statement
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: . Reorient or relocate
the receiving antenna. . Increase the separation between the equipment and receiver. . Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to
computer or peripheral devices).
FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and
your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired
operation.
Industry Canada Statement
This device complies with Industry Canada licence-exempt RSS standard. Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the radiator and your body.
Cet équipement est conforme aux CNR-102 d'Industrie Canada. Cet équipement doit être installé et utilisé avec une distance minimale
de 20 centimètres entre le radiateur et votre corps. Cet émetteur ne doit pas être colocalisées ou opérant en conjonction avec autre
antenne ou émetteur. Les antennes utilisées pour cet émetteur doivent être installés et fournir une distance de séparation d'au moins
20 centimètres de toute personne et doit pas être co-située ni fonctionner en conjonction avec une autre antenne ou émetteur.
5
Specification
Ver.01f
iBS02 Specification and certification
8. CE Regulatory
iBS02 series has been tested and complies with the essential requirements of the DIRECTIVE 2014/53/EU. Below
is the copy of the CE Conformity of Declaration.
6
Specification
Ver.01f
iBS02 Specification and certification
Revision History
DATE REVISION CHANGES
Nov 5, 2019 01 Initial release
Jan 15, 2020 01a Add conformity declaration of CE certification
Mar. 18, 2020 01b fix CE(pending) to CE since certificated
May 4, 2020 01c Add input range for iBS02M2
Sep 24,2020 01d 1. Add BLE 5 long range support to document
2. Update BLE RF specification table with more BLE5 long range parameters
3. Update current consumption and battery life estimation.
4. Add BLE 5 long range current consumption and battery life estimation
Oct 19, 2020 01e Update the current consumption and battery life simulation of iBS02IR2 @1Mbps in
def. setting from 14.4uA and 2.8 year to 18.8uA and 2.1 year.
14.4uA and 2.8 year are calculated with 2 sec. of IR detection period while the def.
detection period is 1 sec.
Jun 3, 2021 01f Update the content of the certification chapter
