0% found this document useful (0 votes)
79 views14 pages

Relese Note

The document provides release notes for the Quectel RM520N-GL 5G module, detailing firmware updates, new features, improvements, and known issues. It emphasizes the importance of following specific upgrade procedures and maintaining confidentiality regarding the module's documentation. Additionally, it includes contact information for technical support and a disclaimer regarding the accuracy of the information provided.

Uploaded by

Jeremias Gordon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
79 views14 pages

Relese Note

The document provides release notes for the Quectel RM520N-GL 5G module, detailing firmware updates, new features, improvements, and known issues. It emphasizes the importance of following specific upgrade procedures and maintaining confidentiality regarding the module's documentation. Additionally, it includes contact information for technical support and a disclaimer regarding the accuracy of the information provided.

Uploaded by

Jeremias Gordon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Quectel RM520N-GL

IoT/eMBB-Optimized
5G Sub-6 GHz M.2 Module

RM520N-GL-AA
Release Notes

5G Module Series

Rev. RM520N-GL-AA_Firmware_Release_Notes_V0108_01.200.01.200

Date: 2023-07-20
5G Module Series

Our aim is to provide customers with timely and comprehensive service. For any assistance,
please contact our company headquarters:

Quectel Wireless Solutions Co., Ltd.


Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai
200233, China
Tel: +86 21 5108 6236
Email: info@[Link]

Or our local office. For more information, please visit:

l
[Link]

t e
For technical support, or to report documentation errors, please visit:

l
[Link]

c
Or email to support@[Link].

e ia
Disclaimer

u t
While Quectel has made efforts to assure the accuracy of this document, unless otherwise provided by

n
valid agreement, Quectel assumes no liability resulting from any inaccuracies or omissions in this
document, or from use of the information obtained herein. Quectel reserves the right to make changes to

Q ide
any contents described herein and reserves the right to revise this document and to make changes from
time to time in content hereof with no obligation to notify any person of revisions or changes. Before using
any updated software, please read this statement carefully. By accessing or using the said software you

f
irrevocably and unconditionally accept and confirm that you agree to be bound by this statement. In the
event you disagree with any provision hereof and would not like to be bound by this statement you shall

n
cease use of the said software immediately.

o
Duty of Confidentiality

C
The Receiving Party shall keep confidential all documentation and information provided by Quectel,
except when the specific permission has been granted by Quectel. The Receiving Party shall not access
or use Quectel’s documentation and information for any purpose except as expressly provided herein.
Furthermore, the Receiving Party shall not disclose any of the Quectel's documentation and information
to any third party without the prior written consent by Quectel. For any noncompliance to the above
requirements, unauthorized use, or other illegal or malicious use of the documentation and information,
Quectel will reserve the right to take legal action.

Copyright
The information contained here is proprietary technical information of Quectel Wireless Solutions Co., Ltd.
Transmitting, reproducing, disseminating and editing this document as well as using the content without
permission are forbidden. Offenders will be held liable for payment of damages. All rights are reserved in
the event of a patent grant or registration of a utility model or design.

Copyright © Quectel Wireless Solutions Co., Ltd. 2023. All rights reserved.

RM520N-GL-AA_Firmware_Release_Notes -1-
5G Module Series

Contents

Contents ....................................................................................................................................................... 2
1. Release Content ................................................................................................................................... 3
2. Matters Needing Attention .................................................................................................................. 3
3. Release History .................................................................................................................................... 4
3.1. Firmware Release History ....................................................................................................... 4
3.2. New Features .......................................................................................................................... 4
3.3. Improved Features .................................................................................................................. 7
3.4. Known Issues .......................................................................................................................... 9

l
4. Functions List..................................................................................................................................... 11

c t e l
u e t ia
Q ide n
n f
Co

RM520N-GL-AA_Firmware_Release_Notes -2-
5G Module Series

1. Release Content

This document provides the Release Notes for RM520N-GL-AA. The current release includes the
firmware package.

Package Version

Firmware RM520NGLAAR01A08M4G_01.200.01.200

t el
2. Matters Needing Attention

SN Item

e c ia l
u t
The firmware version lower than R01A05 needs to be upgraded to the R01A05 version

n
[1] through USB Firehose, and cannot be upgraded to A05 through FOTA; R01A05 and

Q ide
above the firmware versions can be directly upgraded through FOTA.
The new firmware version cannot be downgraded to versions released before
[2] RM520NGLAAR01A07M4G_01.200.01.200, otherwise the module will not be able to
work normally.

f
To extend the service life of flash, the following operations should be avoided to be

n
[3] performed frequently: powering on/off the module, CFUN switching, SIM card hot
swapping, dual-SIM switching, and repeated execution of NVM commands.

o
It is not recommended to directly modify the pre-set APN profiles. Please create an APN
profile after the existed CID number. Suppose you modify the APN profile of IMS, SOS,
[4]

C
etc. with added specific attributes, these attributes are hidden after modification, causing
the profile to still be unavailable.
During the FOTA upgrade process, it is necessary to ensure the stable power supply of
[5] the module. If the power is disconnected during the upgrade, there is a small probability
that the flash will be damaged.

[6] M.2 module is encapsulated without SPI, and SLIC cannot be mounted on the module.

RM520N-GL-AA_Firmware_Release_Notes -3-
5G Module Series

3. Release History

3.1. Firmware Release History

Firmware Release Description

RM520NGLAAR01A08M4G_01.200.01.200 Mass production

l
RM520NGLAAR01A07M4G_01.203.01.203 Mass production

e
RM520NGLAAR01A07M4G_01.202.01.202 Mass production

c t l
RM520NGLAAR01A07M4G_01.201.01.201 Mass production

e a
RM520NGLAAR01A07M4G_01.200.01.200 Mass production

u t i
RM520NGLAAR01A06M4G_01.001.01.001 Mass production

n
RM520NGLAAR01A05M4G_01.001.01.001 Only for sample

Q ide
RM520NGLAAR01A04M4G_01.001.01.001 Only for sample

RM520NGLAAR01A03M4G_01.001.01.001 Only for sample

n f
o
3.2. New Features

C
RM520NGLAAR01A08M4G_01.200.01.200

Item Brief Description

/ /

RM520NGLAAR01A07M4G_01.203.01.203

Item Brief Description

/ /

RM520NGLAAR01A07M4G_01.202.01.202

Item Brief Description

GENERAL Added the following AT commands:

RM520N-GL-AA_Firmware_Release_Notes -4-
5G Module Series

⚫ AT+QNWCFG="nr5g_mimo_info" to control whether to list 5G DL and UL


MIMO information.

RM520NGLAAR01A07M4G_01.201.01.201

Item Brief Description

Added the following AT commands:


⚫ AT+QNWCFG="ledmode" to set the blinking mode of the network light.
⚫ AT+QWDSCFG="operator_reserved_pco" to configure PCO.
GENERAL
⚫ AT+QNWCFG="nitz_ons" to query PLMN long name and short name
from NITZ.
⚫ AT+QAUDRDY to query the status of the Audio service on AP side.

l
RM520NGLAAR01A07M4G_01.200.01.200

t e
Item Brief Description

c l
Relevant technical controls have been carried out to restrict normal network

a
NETWORK registration in regions such as RUS and IRN, thus ensuring that the module

e i
can be used only for civilian applications.

u t
The new firmware version cannot be downgraded to previous versions,
GENERAL

n
otherwise the module will not be able to work normally.

Q ide
GENERAL Supported the feature of routing behind mobile station.
Added AT+QXQCN to configure and query RF parameters of the module and
GENERAL
import QXCN file.

f
RM520NGLAAR01A06M4G_01.001.01.001

n
Item Brief Description

o
GENERAL Supported AQR113C.
Supported URC reporting of PIN-related information (modification, activation,

C
GENERAL
and verification of PIN).
Added the following AT commands:
⚫ AT+QUPTIME to get the system power-up time.
⚫ AT+QFOTAPID to configure the Profile ID used in FOTA upgrade.
⚫ AT+QSIMCFG="dual_slot_status" to query related information of the
SIM cards when dual SIM cards were both inserted.
⚫ AT+QSIMCFG="sim_recovery" to support SIM card recovery and
automatic detection.
GENERAL
⚫ AT+QNWCFG="nr5g_pathloss" to query NR5G pathloss information.
⚫ AT+QPCIE="pcie_gen" to query PCIe GEN in PCIe RC mode.
⚫ AT+QNWCFG="cops_auto_mode" to configure whether the mode
preference is controlled by AT+COPS.
⚫ AT+QNWCFG="nr5g_ulbw" to query NR5G uplink bandwidth.
⚫ AT+QNWCFG="lte_ulMCS" to query LTE uplink MCS and modulation
type.

RM520N-GL-AA_Firmware_Release_Notes -5-
5G Module Series

⚫ AT+QTHERMAL="lte_ul_throttle" to control the uplink rate of Level 1 in


LTE PA mechanism.
⚫ AT+QTHERMAL="nr_ul_throttle" to configure the uplink rate of Level 1
in NR5G PA mechanism.
⚫ AT+QTHERMAL="lte_mtpl_backoff" to control the reduced power value
of Level 2 in LTE PA mechanism.
⚫ AT+QTHERMAL="nr_mtpl_backoff" to control the reduced power value
of the level 2 in NR5G PA mechanism.
⚫ AT+QCALLCFG="ussd_format" to configure the report format of +CUSD
to be hexadecimal or ASCII.
⚫ AT+QSIMCFG="slot_features" to support whether to skip the detection

l
of service130 and service133.

e
RM520NGLAAR01A05M4G_01.001.01.001

t l
Item Brief Description

c a
GENERAL Configured the project as data-only.

e t i
GENERAL Configured Commercial-TMO MBN as data-only.

u n
RM520NGLAAR01A04M4G_01.001.01.001

Q ide
Item Brief Description
Added AT+QTHERMAL to expand related configurations of thermal
Thermal Mitigation
management.

f
GENERAL Added AT+QDPRSAR to set a DPR scheme.

n
RM520NGLAAR01A03M4G_01.001.01.001

o
Item Brief Description

C
/ /

RM520N-GL-AA_Firmware_Release_Notes -6-
5G Module Series

3.3. Improved Features

RM520NGLAAR01A08M4G_01.200.01.200

Item Brief Description

GENERAL Updated the Verizon ENDC whitelist as required by Verizon.

RM520NGLAAR01A07M4G_01.203.01.203

l
Item Brief Description

e
Fixed DFIT#1 issue to make module acquire 3LTE+1NR when working under

t
GENERAL
Samsung n77 Infra for Verizon MBN.

c l
GENERAL Fixed Motive issue on TC2.08 for Verizon MBN.

e ia
Hard code 5G Stand Alone was disabled in SW and not allowed to use AT
GENERAL

t
command to enable or disable SA for Verizon MBN.

u n
GENERAL Disabled 2CC on N77 for non-contiguous carriers for Verizon MBN.

Q ide
RM520NGLAAR01A07M4G_01.202.01.202

Item Brief Description

Extended AT+QNWCFG="ssb_beam_id" to add <RSRQ> and <PCID> in the

f
NETWORK return value of the command and to query all SSB beam information that have

n
been measured currently.
Modified the value of <SRS_tx_pwr> in the return result of

o
NETWORK
AT+QNWCFG="lte_tx_pwr".
RF TX FTM Extended AT+QTXFTMEX to add <nr_srs> parameter.

C
Solved the probabilistic problem that RmNet data call failed in some special
RmNet
cases.
Solved the problem that the module probabilistically did not forward IPV6 NS
GENERAL
packets to LAN device in bridge mode.
RM520NGLAAR01A07M4G_01.201.01.201

Item Brief Description

DFOTA Added judgment to limit FOTA URL length to 512 bytes.

MBIM Solved the problem of incorrect signal grids of Windows OS.

Solved the problem of error reported when n41 was tested with
RF TX FTM
AT+QTXFTMSRS.
GENERAL Optimized cw2017 driver to solve the problem that the module might not be

RM520N-GL-AA_Firmware_Release_Notes -7-
5G Module Series

available in some scenarios.

Solved the problem that URC could only be sent through the USB AT port, USB
GENERAL
modem port and UART1 because the URC reporting ports were limited.
Solved the following problems related to AT+CLCC:
⚫ An error was reported when AT+CLCC was executed during EPSFB
GENERAL process.
⚫ The voice call status queried through AT+CLCC was abnormal after the data
call ended.
RM520NGLAAR01A07M4G_01.200.01.200

l
Item Brief Description

e
GENERAL Extended AT+QSINR to obtain the SINR value in NSA.

t
Solved the problem that the RSRP and RSRQ values returned by AT+QSCAN in

l
GENERAL

c
some cases were null.

e a
RM520NGLAAR01A06M4G_01.001.01.001

u t i
Item Brief Description

n
NETWORK Extended AT+QNWCFG="ledmode" to support turning off all lights.

Q ide
USB Optimized AT+QCFG="usbcfg" to support disabling or enabling QDL and QDSS.
Solved the problem that the bandwidth value returned by
GENERAL
AT+QENG="servingcell" did not match the actual value.

f
GENERAL Optimized the MBN exception recovery mechanism.

n
Optimized the verification mechanism of DFOTA and ABFOTA for the file name of
GENERAL

o
upgrade firmware package.
Optimized AT+QCAINFO to add restrictions and judgments on the network so
GENERAL

C
that the parameters were returned after connecting to the network.
GENERAL Extended AT+QSCAN to add <scan_LTE_band> and <scan_NR5G_band>.

Solved the problem of not supporting the query of the uplink frequency of LTE
GENERAL
under NSA with AT+QNWCFG="freq_info".
Optimized AT+QIMSCFG="service" for parameter configuration to take effect
GENERAL
immediately.
GENERAL Extended AT+QENDC to add parameter and to support URC reporting.

Forbade to execute AT+CFUN=0 or AT+CFUN=1 when #W_DISABLE1 was in


GENERAL
low level.
GENERAL Modified the URC default report port to All Port.

RM520NGLAAR01A05M4G_01.001.01.001

Item Brief Description

RM520N-GL-AA_Firmware_Release_Notes -8-
5G Module Series

NETWORK Extended AT+QNWCFG="rrc_state" to support URC reporting.

Solved the problem that the AT port could not work properly after configuring to
GENERAL
report the URC through all ports.
GENERAL Extended AT+QGPAPN to support querying IPv4 addresses.

GENERAL Extended AT+QRSRP to support querying NSA information.

GENERAL Modified AT+QGPAPN to adapt it to NSA.

GENERAL Optimized the reporting logic of URC +C5GREG.

Solved the problem that only one APN could be queried through AT+QGPAPN

l
GENERAL
after multiple data call under SA.

e
RM520NGLAAR01A04M4G_01.001.01.001

c t l
Item Brief Description

e a
NETWORK Extended AT+QCAINFO to support querying CA information under NSA and SA.

t i
Solved the problem that after disabling NSA, you can still query the NSA

u
NETWORK
information with AT+QENG.

n
GENERAL Updated the command set and the response format of AT+QMAP.

Q ide
RM520NGLAAR01A03M4G_01.001.01.001

Item Brief Description

f
/ /

3.4. Known Issues

o n
Item

NOTE
CBug Description

Verification Environment is shown below. For more details, please contact Quectel Technical Support.
For Windows:
USB Driver: Quectel_Windows_USB_Driver(Q)_NDIS_V2.[Link]
Qflash Tool: QFlash_V6.[Link]

For Linux:

RM520N-GL-AA_Firmware_Release_Notes -9-
5G Module Series

QMI_WWAN Driver: Quectel_Linux_QMI_WWAN_Driver_V1.[Link]


GobiNet Driver: Quectel_Linux&Android_GobiNet_Driver_V1.[Link]
PCIE Driver: Quectel_Linux_PCIE_MHI_Driver_V1.[Link]
QFirehose Tool: Quectel_LTE&5G_QFirehose_Linux&Android_V1.[Link]
Quectel-CM Tool: Quectel_QConnectManager_Linux_V1.[Link]
QLog Tool: Quectel_QLog_Linux&Android_V1.[Link]

For IPQ:
Quectel PCIE Driver: Quectel_Linux_PCIE_MHI_Driver_V1.[Link]

t el
e c ia l
u n t
Q ide
n f
Co

RM520N-GL-AA_Firmware_Release_Notes -10-
5G Module Series

4. Functions List

Category Item Supported Version (Since) Note


RM520NGLAAR01A03M4G
SMS /
_01.001.01.001
Basic Function
RM520NGLAAR01A03M4G
Network /
_01.001.01.001

l
RM520NGLAAR01A03M4G
File Function UFS /
_01.001.01.001

e
RM520NGLAAR01A03M4G

t
QMI /
_01.001.01.001

c l
RM520NGLAAR01A03M4G
Protocol Function NITZ /

a
_01.001.01.001

e i
RM520NGLAAR01A06M4G

t
LwM2M /
_01.001.01.001

u
RM520NGLAAR01A03M4G

n
USB /
_01.001.01.001

Q ide
RM520NGLAAR01A03M4G
MBIM /
_01.001.01.001
Interface Function
RM520NGLAAR01A03M4G
RmNet /

f
_01.001.01.001
RM520NGLAAR01A03M4G

n
PCIE /
_01.001.01.001

o
RM520NGLAAR01A03M4G
Locate Function AGPS /
_01.001.01.001
RM520NGLAAR01A05M4G

C
Upgrade Function DFOTA /
_01.001.01.001
RM520NGLAAR01A03M4G
DSSS
_01.001.01.001
RM520NGLAAR01A03M4G
SIM Function (U)SIM Detection
_01.001.01.001
RM520NGLAAR01A06M4G
ESIM /
_01.001.01.001
RM520NGLAAR01A04M4G
Wi-Fi 6 /
_01.001.01.001
RM520NGLAAR01A04M4G
Low Power /
Special Function _01.001.01.001
RM520NGLAAR01A03M4G
RF RX FTM /
_01.001.01.001
RF TX FTM RM520NGLAAR01A03M4G /

RM520N-GL-AA_Firmware_Release_Notes -11-
5G Module Series

_01.001.01.001

RM520NGLAAR01A04M4G
SAR /
_01.001.01.001
RM520NGLAAR01A04M4G
Thermal Mitigation /
_01.001.01.001
RM520NGLAAR01A06M4G
Security Function Secure boot /
_01.001.01.001
RM520NGLAAR01A03M4G
5G Function 5G /
_01.001.01.001

t el
e c ia l
u n t
Q ide
n f
Co

RM520N-GL-AA_Firmware_Release_Notes -12-
5G Module Series

About Quectel

Quectel Wireless Solutions is the leading global supplier of cellular and GNSS
modules, with a broad product portfolio covering the most recent wireless

l
technologies of 5G, LTE/LTE-A, NB-IoT/LTE-M, UMTS/HSPA(+), GSM/GPRS and
GNSS. As a professional IoT (Internet of Things) technology developer and

e
cellular module supplier, Quectel is able to provide one-stop services for IoT

t l
cellular modules. Quectel products have been widely applied in IoT/M2M fields

c
including smart payment, telematics and transport, smart energy, smart cities,

a
security, wireless gateways, industry, healthcare, agriculture, and environment

e i
monitoring.

u n t
Q ide
n f
Co

You might also like