Scribd
Upload
208 views2 pages

AE Breeching Inlet Data Sheet

The document details the specifications and features of 2-Way and 4-Way breeching inlets designed in accordance with BS 5041: Part 3: 1975, made from high-quality materials for durability and corrosion resistance. Each inlet undergoes hydrostatic testing to ensure leak-proof performance, with various flange connection options available. The breeching inlets are approved by BSI Kitemark and SETSCO, highlighting their compliance with industry standards.

Uploaded by

teehanfire
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
208 views2 pages

AE Breeching Inlet Data Sheet

The document details the specifications and features of 2-Way and 4-Way breeching inlets designed in accordance with BS 5041: Part 3: 1975, made from high-quality materials for durability and corrosion resistance. Each inlet undergoes hydrostatic testing to ensure leak-proof performance, with various flange connection options available. The breeching inlets are approved by BSI Kitemark and SETSCO, highlighting their compliance with industry standards.

Uploaded by

teehanfire
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

2-WAY AND 4-WAY BREECHING INLET

GENERAL
“AE” Fig.135 (4-Way) and Fig.136 (2-Way) type breeching inlets
are designed, constructed and manufactured in accordance with
BS 5041 : Part 3 : 1975.

The materials used in the manufacture of the breeching inlets are


in conformity to the standard’s requirement. The body is casted
from spheroidal graphite iron and the inlets are made of BS1400
LG2 gunmetal and copper alloy parts with bronze spring, stainless
steel locknut, washer, etc.,

The internal part of the breeching inlet bodies are coated with
“black” epoxy cold tar paint which is a good anti-corrosion
protection.

The inlet blankcaps are rubber with chrome chain. Brass or


gunmetal blankcaps are also available on request.

The breeching inlets are individually hydrostatically tested on the


body and inlets at 20 bars (approx. 300 PSI) and the non-return
valves are tested to 1.7 bars (approx. 25 PSI) to ensure that no leaks
are evident under such low pressure as required by the standard.

The 2-Way and 4-Way outlet flange connections are 100mm and
150mm PN16 FF (standard) respectively. Other flange connections
eg., BS10 Table 'D' or 'E', ANSI #150 flat-face (FF) or raised-face (RF)
are available upon request.

FEATURES
• Compact and elegant design with excellent flow characteristics.
• High quality casting finishes.
• Corrosion resistant and quality materials used for durability,
long-life and efficiency.
• Maintenance free.

APPROVAL:
• BSI Kitemark KM551498 (UK)
• SETSCO Listed under PLS Class 1A (Singapore).
2-WAY AND 4-WAY BREECHING INLET

* All dimensions shown are in millimetres.


* Due to the improvement in the design and standard, we reserve the right to change the specifications without prior notice.

You might also like