CLASSIFICATION OF COMPUTERS

Computers can be classified according to the following factors:

1. Physical size & processing power.
2. Purpose for which they are designed.
3. Functionality (Method/ mode of operation).

A. CLASSIFICATION ACCORDING TO PHYSICAL SIZE

Computers can be classified into 5 main groups according to their size as:
 Supercomputers.
 Mainframe computers.
 Minicomputers.
 Microcomputers.
 Portable computers (Laptops, Notebooks & Palmtops).

Supercomputers
Supercomputers are the fastest, largest, most expensive & also the most powerful computers
available.
They are very fast in processing. They can perform many complex calculations in a fraction
of a second.
Most Supercomputers use multiple processors. In this case, a single task is split among the
processors for faster execution. However, all the processors are controlled by a single central
processor.
Supercomputers generate a lot of heat, & therefore require special cooling systems.
Sometimes, the whole CPU is deeped in a tank containing liquid Fluorocarbon to provide
cooling.
Supercomputers are very large & heavy, and are usually kept under special environmental
conditions (i.e., in a special room).
They are operated by computer specialists. A Supercomputer can be operated by over 500
users at the same time.
Areas where supercomputers are used
Supercomputers are mainly used for complex scientific applications that involve many
calculations & require a lot of computational power. Some of the applications that use
supercomputers include;
 Weather forecasting.
 Petroleum research.
 Defence and weapon analysis.
 Aerodynamic design and simulation.
Note. These tasks use large amounts of data, which need to be manipulated within a very
short time.
Examples of Supercomputers:
 CRAY T3D, NEC-500.

Mainframe computers
Mainframes are less powerful & less expensive than supercomputers.
They are big in size but smaller compared to Supercomputers.
Are powerful computers with very high capacities of Main storage. They also have a large
backing storage capacity.
Have a very high processing speed, i.e., can process large amounts of data very quickly. -13-
They can support a large number of peripherals of different types (can support between 5–
300 terminals).
They can handle hundreds of users at the same time, e.g., they can be operated by 200 users at
a time.
Mainframe computers are general-purpose, and can handle all kinds of problems whether
scientific or commercial.
Areas where mainframe computers are used
Mainframe computers are mostly found in government departments, big organizations and
companies which have large information processing needs, e.g., they are used;
 In Banks & Hospitals for preparing bills, Payrolls, etc.
 In communication networks such as the Internet where they act as Servers.
 By Airline reservation systems where information of all the flights is stored.
Examples of Mainframes:
 IBM 4381.
 ICL 39 Series.
 CDC Cyber series.

Minicomputers
A Minicomputer is physically smaller than a mainframe. However, it can support the same
peripheral devices supported by a mainframe.
A Minicomputer can support several users at a time, e.g., can be operated by 6 users at a time.
Several workstations/ terminals are connected to one central minicomputer so that the users
connected can share its resources (C.P.U time, storage, etc).
Minicomputers are easier to manufacture & maintain compared to mainframes.
Minicomputers are cheaper than the mainframes, but more costly than the microcomputers.
They handle small amounts of data, are less powerful, & have less memory than the
mainframes.
Minicomputers are slow compared to mainframe computers.

Areas where minicomputers are used

Minicomputers are used mainly in:
 Scientific laboratories & research institutions.
 Engineering plants/factories to control of chemical or mechanical processes.
 Space industry.
 Insurance companies & Banks for accounting purposes.
 Smaller organizations as Network Servers.
Example of Minicomputer:
 PDP-8 built in 1965 by Digital Equipment Corporation in U.S.

Microcomputers
Microcomputers are the PCs mostly found today in homes, schools & many small offices.
They are called Personal Computers (PCs) because they are designed to be used by one
person at a time.
They consist of very few connected units, i.e. can support very few peripheral devices
(usually 1 or 2).
The data processing in microcomputers is done by a Microprocessor (a single chip
containing the Arithmetic Logic unit & Control unit).
Microcomputers are smaller in size & also cheaper than minicomputers. Their design is
based on Very Large Scale Integration (VLSI) that confines several physical components
into an IC.
They are less powerful than minicomputers & their internal memory is smaller than that of
minicomputers.
Areas where microcomputers are used
Microcomputers are commonly used in:
 Training and learning institutions such as schools.
 Small business enterprises, and
 Communication centres as terminals.
Microcomputers have become very popular because of the following reasons:
1) Are cheaper than both mini & mainframe computers.
2) Are very fast (i.e. have high processing speeds).
3) Small in size, hence they occupy less space in an office.
4) Are more energy efficient (i.e., consume less power).
5) Are more reliable than the early Mainframe computers.
Examples:
 IBM PCs such as Apple Macintosh, Dells, Compaq, etc.

Laptops & Notebooks

A Laptop is a PC sufficiently small & light such that a user can use it comfortably on his/her
lap. It is designed to be used by placing it on the lap.
- Laptops are very small in size & are portable. They are small enough to fit inside a
briefcase; still leaving room for other items.
- A Laptop computer operates mainly on electricity or by rechargeable batteries.
- Laptops normally have in-built disk drives & Flat screens (Liquid Crystal Displays).
- Can only support a limited number of peripheral devices.
- Have limited storage capacities.
Note. The smaller computers like Laptops tend to be more expensive than Desktop
computers because of the following reasons:
1) The technology of producing smaller devices is expensive.
2) They are convenient because they are portable.
3) They have advanced power management capabilities (they consume less power since a
laptop can operate on rechargeable batteries).

Palmtops
Palmtops are small enough to fit in the pocket, and can be held in the palm when being used.
- Have limited storage capacities.
- Palmtops are mainly used as Personal Organizers, with some minimal programs for
calculations, Word processing, Spreadsheets, & E-mail.
Example of a Palmtop; Personal Digital Assistant (PDA).

Desktop computer
This is the name given to any computer designed to be used when placed on a desk in an
office environment.
- They are not portable.

Examples of desktop computers:

1) Home computer
This is a low-cost microcomputer of limited capability designed for domestic use. It has
programs that are used typically for computer games or controlling family finances.
2) Personal computer (PC)
This is a microcomputer designed for independent use by an individual at work or in the
home mainly for business purposes.
- A PC can support only 1 user at a time.
 - PCs are mostly used in offices, schools, business premises, and at home for various
applications like computer literacy, Games, Database management, Accounting, Word
processing, Telecommunications, etc.
- A PC can be connected to a mini & mainframe computer so as to enable the user
access the facilities offered by the larger machines.
3) Workstation
A workstation is usually a desktop computer with all the facilities but interlinked to a
network.
A typical workstation works in a similar way to a Personal computer. However, it is
more advanced than a typical PC in the following ways:
i). It is larger & more powerful than a PC. E.g., workstations use 32-bit
microprocessors, while PCs use 16-bit microprocessors.
ii). It has in-built capabilities for its interconnection & operation with other computers,
i.e., it is fully connected to a computer network as any other computer on the
network in its own right.
iii). It has high resolution graphics.
iv). It has a Multi-tasking operating system, i.e. it is able to run multiple applications at
the same time.

An Embedded computer
This is a computer that is within another device or system but is not accessed directly. E.g.,
there are embedded computers operating within Petrol pumps, Watches, Cameras & Video
recorders.

B. CLASSIFICATION ACCORDING TO PURPOSE

Digital computers can be classified further according to the tasks they perform either as:
 General-purpose.
 Special purpose
 Dedicated computers.

General-purpose computers
General-purpose computers are designed to perform a wide variety of tasks. They use
specifically written instructions (programs) to carry out the desired processing tasks.
Example;
A single computer can be used to process documents, perform calculations, process the
Payroll, simulate the loading on a bridge, process Insurance policies, and play games, among
others.
The programs used in a general-purpose computer are exchangeable. This means that, to
perform a particular task, the appropriate set of instructions required to perform that
particular task are loaded into the computer memory.
E.g., if you want to play a game, the appropriate program is loaded into the computer’s
memory & the computer is instructed to execute the instructions which make up the game.
Examples of general-purpose computers: Mainframes, Minicomputers, Microcomputers &
Laptops used in most offices & schools.

Special-purpose computer
A special-purpose computer is designed to handle/accomplish a particular specific task only.
Such computers cannot perform any other task except the one they were meant to do.
Therefore, the programs which are used in a special-purpose computer are fixed (hard-wired)
at the time of manufacture.
For example;
In a computer Network, the Front End Processor (FEP) is only used to control the
communication of information between the various workstations and the host computer.
 A Special-purpose computer is dedicated to a single task; hence it can perform it quickly &
very efficiently.
Examples of special-purpose computers:
 Robots used in a manufacturing industry for production only.
 Mobile phones used for communication only.
 Calculators that carry out calculations only.
 Computers used in Digital watches.
 Computers used in Petrol pumps.
 Computers used in Washing machines.
 An Automatic pilot – a computer dedicated to the task of operating an aircraft.
 A Word processor – a special-purpose computer used in the production of office
documents, letters, etc.

Reasons why a Mobile phone is regarded to be a computer

 It is electronic.
 Has a screen.
 It has a Keypad.
 Has a Memory.
 It is programmable.

Dedicated computer
A Dedicated computer is a general-purpose computer that is committed to some processing
task; though capable of performing a variety of tasks in different application environments.
E.g., the computer can be dedicated to carrying out Word processing tasks only.

C. CLASSIFICATION ACCORDING TO FUNCTIONALITY

Usually, there are two forms of data; Digital data, and Analogue data. Computers can be
classified according to the type of data they can process as either.
 Digital computers.
 Analogue computers, or
 Hybrid computers.

Digital computers
This is the most commonly used type of computers.
A Digital computer is a computer that operates on discrete data only. It can process both
numeric & alphabetic data within the computer, e.g., 0, 1, 2, 3…, A,B,C….
Their operation is based on 2 states, “ON” & “OFF” or on digits “1” & “0”. Therefore, any
data to be manipulated by a digital computer must first be converted to digital form.
Their output is usually in form of numbers, alphabets, & symbols.
Digital computers are usually general-purpose computers; hence, they are widely used in
different areas for data processing.
Most of the devices found at homes today are digital in nature.
Digital computers are less accurate, i.e. may not solve all your problems since the facilities
provided are generalized.
Examples:
 A Television with a button which is pressed to increase or decrease the volume.
 Digital watches.
 Calculators.
 Microcomputers. They are said to be digital because they posses the ALU.

Analogue computers
An Analogue computer is a computer that operates on continuous data.
They carry out their data processing by measuring the amount of change that occurs in
physical attributes/quantities, such as changes in electrical voltage, speed, currents, pressure,
length, temperature, humidity, etc.
 An Analogue computer is usually a special-purpose device that is dedicated to a single task.
For example, they are used in specialized areas such as in:
- Scientific or engineering experiments,
- Military weapons,
- Controlling manufacturing processes like monitoring & regulating furnace temperatures
and pressures.
- Weather stations to record & process physical quantities, e.g., wind, cloud speed,
temperature, etc.
The output from analogue computers is in form of smooth graphs produced by a plotting pen
or a trace on a Cathode Ray Tube (CRT) from which the information can be read.
Note: Analogue computers usually use one characteristic, e.g. a length, to give information
about another physical characteristic, such as weight.
Analogue computers are very accurate & efficient since they are dedicated to a single task.
They are very fast since most of them use multiple processors.

Hybrid computers
Hybrid computers are designed to process both analogue & digital data. They
combine both the functional capabilities of the digital and analogue computers.
Hybrid computers are designed by interconnecting the elements of a digital computer
& analogue computer directly into one processor, using a suitable interfacing
circuitry.
Hybrid computers are more expensive.
Example;
In a hospital Intensive Care Unit, an analogue device may be used to measure the
functioning of a patient’s heart, temperature and other vital signs. These measurements
may then be converted into numbers and send to a digital device, which may send an
immediate signal to the nurses’ station if any abnormal readings are detected.