Global Fire Equipment // globalfire.
pt
GLOBAL FIRE
dt_junonet_01_010002_en_200406
E Q U I P M E N T
JUNO NET
JUNO NET
Networkable Fire Detection System
Networkable Fire Detection System
EN54-2 and EN54-4
1328-CPR-0160
CERTIFIED
EN54-2 and EN54-4
IFIED 1328-CPR-0160
CERT CERTIFIED
JUNO NET is a powerful Analogue Addressable Fire Alarm Control System with networking capabilities that
facilitate the configuration of complex Wide Area Fire Detection Systems. Modular construction and distributed
NO NET is a powerful Analogue
intelligence Addressable
allow systems of up toFire AlarmtoControl
96 Loops System with
be constructed. Withnetworking capabilities
a high level of that
built-in redundancy and
cilitate the configuration of complex Wide Area Fire Detection Systems. Modular construction and distributed
emergency backup features, the JUNO NET is fully equipped to control the most complex installations.
elligence allow systems of up to 96 Loops to be constructed. With a high level of built-in redundancy and
mergency backup features,
Using its widethe JUNO
array NET is fully
of interfacing equipped
capabilities thetoJUNO
control
NETthe most complex
is ideally placed toinstallations.
provide an efficient and effective
solution to the logistics of protecting large institutions. JUNO NET is available as a standalone system of up to 13 Loops
ing its wide array
in aofsingle
interfacing
cabinetcapabilities
and can bethe JUNO NET
expanded is ideally
to up placed
to 96 Loops viatoaprovide an efficient
networked array ofand effectivewhich
sub-panels solution
cantobe supplied in
logistics of protecting largeversion
a blank box institutions. JUNO NET
or combined withisa available
repeater toasallow
a standalone systemand
remote display of up to 13 Loops
control in a single
of the system. Networking is done
binet and can be expanded to up to 96 Loops via a networked array of sub-panels which can be supplied in a blank box
by a monitored, redundant, double RS422/RS485, Fibre optic loop or TCP/IP network.
sion or combined with a repeater to allow remote display and control of the system. Networking is done by a monitored,
dundant, doubleThe JUNO NET networking
RS422/RS485, Fibre opticcapabilities are further
loop or TCP/IP [Link] by a wide range of programming options which provide the
capability to customise the system according to the needs of the customer. Flexible cause and effect programming of I/O
e JUNO NET networking capabilities
devices and are further
warning devices enhanced
ensure by Fault
that Fire/ a wide range oftrigger
warnings programming options which
the appropriate provide the
response.
pability to customise the system according to the needs of the customer. Flexible cause and effect programming of I/O
vices and warningAn interactive graphic
devices ensure thatrepresentation of the system
Fire/ Fault warnings canappropriate
trigger the be displayed on the users’ computer via the ODYSSEY graphical
response.
software (optional). All the devices on the system can be displayed on a building plan showing their status in real time.
In therepresentation
interactive graphic event of Fire or
of Fault the customer
the system can control
can be displayed onthe
thesystem and accessvia
users' computer allthe
theODYSSEY
necessary information
graphical with a few
tware (optional). All the devices on the system can be displayed on a building plan showing their status in real time. In the
mouse-clicks.
ent of Fire or Fault the customer can control the system and access all the necessary information with a few mouse-clicks.
Automatic device detection at start up reduces time spent at the commissioning stage. In Installation mode the JUNO
tomatic device NET detects
detection at and
startrecognises
up reducesaddressed
time spentand connected
at the devices stage.
commissioning with theIn system being
Installation fullythe
mode operational
JUNO NETin less than two
minutes.
ects and recognises The default
addressed andprogramming ensures
connected devices that
with thethe system
system is ready
being to detect Fire/
fully operational Faultthan
in less alerts
twofrom the moment that
minutes.
power isensures
e default programming [Link] the system is ready to detect Fire/ Fault alerts from the moment that power is applied.
Additional programming, to customise the system can be implemented via the onboard keypad, IR programmer, PS/2
ditional programming, to customise the system can be implemented via the onboard keypad, IR programmer, PS/2
keyboard or with a laptop PC running the GFE CONNECTOR software which is available free of charge on the website .
yboard or with a laptop PC running the GFE CONNECTOR software which is available free of charge on the website.
KEY FEATURES
AIN FEATURES
Fully expandable system from 1-96 Loops with distributed intelligence for added security
• Fully expandable system from 1-96 Loops with distributed intelligence for added security
125 Device addresses per loop
• 125 Device addresses per loop
Up to 96 Loop sounders with 32 individually programmable addresses per Loop
96 VULCAN 2•(addressable)
Up to 96 Loop sounders
ultra withsounders
low current 32 individually programmable
or beacons per Loop. addresses
Only 64 ofper Loop
these units should be installed
per loop when•combined
96 VULCAN 2 (addressable)
sounder beacons areultra
beinglowused.
current
Thissounders or beacons
number includes per Loop. Only
addressable, 64 ofauxiliary
shadow, these units
and should be installed
per loop when combined
detector-sounder/beacon versions of these units sounder beacons are being used. This number includes addressable, shadow, auxiliary and
detector-sounder/beacon
Compatible with major analogue addressable versions of these units
communications protocols
• Compatible
2 Fire output changeover with
relays andmajor analogue
1 Fault output addressable
relay (NC) communications protocols
Open collector•outputs
2 Fire for Fire,changeover
output Fault and pre-alarm
relays and remote
1 Faultindication
output relay (NC)
2 Fully monitored conventional
• Open collectorsounder
outputsoutputs
for Fire,onFault
mainandpanel and each
pre-alarm sub panel
remote indication
Repeaters with optional integrated Sub-Panels (J-NET-REP + Loop Card)
• 2 Fully monitored conventional sounder outputs on main panel and each sub panel
384 Programmable zones with optional integrated Sub-Panels (J-NET-REP + Loop Card)
• Repeaters
512 Fully programmable sounder and I/O groups
• 384 Programmable zones
Event Log 2000 entries FIFO
• 512 Fully programmable sounder and I/O groups
Backlit LCD display 4 row x 40 characters
Programming •options:
Eventonboard
Log 2000keypad,
entriesRemote
FIFO IR (optional), PS2 Keyboard and GFE CONNECTOR Software
PC Graphics package ODYSSEY for alarmxmanagement
• Backlit LCD display 4 row 40 charactersand reporting (optional)
• Programming
Multiple Language support (menu options: onboard keypad, Remote IR (optional), PS2 Keyboard and GFE CONNECTOR Software
selectable)
MODBUS (ASCII • PC Graphics
& RTU) and package ODYSSEY for alarm management and reporting (optional)
BMS support.
• Multiple Language support (menu selectable)
• MODBUS (ASCII & RTU) and BMS support.
Global Fire Equipment SA
Sitio dos Barrabés, Armazém Nave Y, Caixa Postal 908-Z 1
8150-016 São Brás de Alportel. PORTUGAL
Telephone: (00351) 289 896 560 / Email: info@[Link] / Web: [Link] GSS GROUP
GLOBAL FIRE
Global Fire Equipment // [Link]
E Q U I P M E N T
dt_junonet_01_010002_en_200406
JUNO NET
JUNO NET
Networkable Fire Detection System
EN54-2 and EN54-4
Networkable Fire Detection System
1328-CPR-0160
CERTIFIED
TECHNICAL
JUNO NETSPECIFICATIONS
is a powerful Analogue Addressable Fire Alarm Control System with networking capabilities that
facilitate the configuration of complex Wide Area Fire Detection Systems. Modular construction and distributed
intelligence allow systems of up to 96 Loops to be constructed. With a high level of built-in redundancy and
1 - 3 LOOPS
emergency backup features, the JUNO NET is fully equipped to control the most complex installations. 4 - 13 LOOPS
LOOPS Using its wide array of interfacing capabilities
1 tothe 4 loops - Max 275 mA per loop 4 to solution
JUNO NET is ideally placed to provide an efficient and effective 13 loops to - Max 275 mA per loop
the logistics of protecting large institutions. JUNO NET is available as a standalone system of up to 13 Loops in a single
SOUNDER OUTPUTS
cabinet and can be expanded to up to 962Loops at 28viaVa DC / 500array
networked mAof sub-panels
each which can be supplied 4/6/8
in a blank24boxV DC / 500 mA each
version or combined with a repeater to allow remote display and control of the system. Networking is done by a monitored,
AUX. RELAYS FIRE 2 rated 50 VAC
redundant, double RS422/RS485, Fibre optic loop or TCP/IP network. / DC 1A resistive 2 rated 50 V AC / DC 1A resistive
AUX. RELAY FAULT
The JUNO NET networking capabilities are1 rated 50 VACby/ aDC
further enhanced 1A
wide resistive
range options which1provide
of programming ratedthe50 V AC / DC 1A resistive
capability to customise the system according to the needs of the customer. Flexible cause and effect programming of I/O
AUX SUPPLY OUTPUT 28 V DC; 2x230 mA
devices and warning devices ensure that Fire/ Fault warnings trigger the appropriate response.
28 V DC; 2x230 mA
ADDITIONAL OUTPUTS Multiplexed up to 384 Zones Multiplexed up to 384 Zones
An interactive graphic representation of the system can be displayed on the users' computer via the ODYSSEY graphical
PRIMARYsoftware
SUPPLY (optional). All the devices on the system can be displayed on a building plan showing their status in real time. In the
230 +10% -15% V AC 230 +10% -15% V AC
event of Fire or Fault the customer can control the system and access all the necessary information with a few mouse-clicks.
SECONDARY SUPPLY 28 V DC Nominal 28 V DC Nominal
Automatic device detection at start up reduces time spent at the commissioning stage. In Installation mode the JUNO NET
detects and recognises addressed and connected devices with the system being fully operational in less than two minutes.
POWER SUPPLY RATING 65 W 150 W (4-6 Loop) - 200 W (7-13 Loop)
The default programming ensures that the system is ready to detect Fire/ Fault alerts from the moment that power is applied.
QUIESCENT CURRENT (NO DEVICES) 130 mA
Additional programming, to customise the system can be implemented via the onboard keypad, IR programmer, PS/2
130 mA + 90 mA / sub-panel
keyboard or with a laptop PC running the GFE CONNECTOR software which is available free of charge on the website.
BATTERIES (INTERNAL) 2 x 12 V 12 AH 2 x 12 V 12 AH
OPERATING
MAINTEMPERATURE
FEATURES -10ºC to 50ºC -10ºC to 50ºC
● Fully expandable system from 1-96 Loops with distributed intelligence for added security
STORAGE● TEMPERATURE
125 Device addresses per loop -10ºC to 50ºC -10ºC to 50ºC
● Up to 96 Loop sounders with 32 individually programmable addresses per Loop
HUMIDITY
● 96 VULCAN 2 (addressable) ultra low Max
current95% no condensation
sounders or beacons per Loop. Max
Only 64 of these units should be 95% no condensation
installed
per loop when combined sounder beacons are being used. This number includes addressable, shadow, auxiliary and
PROTECTION detector-sounder/beacon versions ofIP21
these units IP21
● Compatible with major analogue addressable communications protocols
DIMENSIONS
● 2 Fire output changeover relays and 375 1 Fault(L) x 345
output relay(W)
(NC) x 139 (H) mm 420 (L) x 550 (H) x 127 (W) mm
● Open collector outputs for Fire, Fault and pre-alarm remote indication
WEIGHT● 2 Fully monitored conventional sounder 5,1outputs
Kg (no batteries)
on main panel and
each sub panel 8,1 Kg (no batteries)
● Repeaters with optional integrated Sub-Panels (J-NET-REP + Loop Card)
COLOUR● 384 Programmable zones White or Red White or Red
● 512 Fully programmable sounder and I/O groups
● Event Log 2000 entries FIFO
● Backlit LCD display 4 row x 40 characters
ORDER CODE●
●
Programming options: onboard keypad, Remote IR (optional), PS2 Keyboard and GFE CONNECTOR Software
PC Graphics package ODYSSEY for alarm management and reporting (optional)
● Multiple Language support (menu selectable)
J-NET-EN54-SC-001
● 1328-CPR-0160 1 LOOP - PSU 2.4A
MODBUS (ASCII & RTU) and BMS support.
J-NET-EN54-SC-002 1328-CPR-0160 2 LOOPS - PSU 2.4A
J-NET-EN54-SC-003 1328-CPR-0160 3 LOOPS - PSU 2.4A
J-NET-EN54-SC-004-L LARGE BOX1- 4 LOOPS - PSU 5A
J-NET-EN54-SC-005 LARGE BOX - 5 LOOPS - PSU 5A
J-NET-EN54-SC-006 LARGE BOX - 6 LOOPS - PSU 5A
J-NET-EN54-SC-007 LARGE BOX - 7 LOOPS - PSU 7.5A
J-NET-EN54-SC-008 LARGE BOX - 8 LOOPS - PSU 7.5A
J-NET-EN54-SC-009 LARGE BOX - 9 LOOPS - PSU 7.5A
J-NET-EN54-SC-010 LARGE BOX - 10 LOOPS - PSU 7.5A
J-NET-EN54-SC-011 LARGE BOX - 11 LOOPS - PSU 7.5A
J-NET-EN54-SC-012 LARGE BOX - 12 LOOPS - PSU 7.5A
J-NET-EN54-SC-013 LARGE BOX - 13 LOOPS - PSU 7.5A
Global Fire Equipment SA
Sitio dos Barrabés, Armazém Nave Y, Caixa Postal 908-Z
8150-016 São Brás de Alportel. PORTUGAL
Telephone: (00351) 289 896 560 / Email: info@[Link] / Web: [Link] GSS GROUP
