PAGE 1 OF 3
DATE :
International Well Control Forum
Subsea BOP Kill Sheet - Deviated Well (S.I. Units) NAME :
FORMATION STRENGTH DATA: CURRENT DRILLING FLUID:
DENSITY kg/m3
SURFACE LEAK -OFF PRESSURE FROM
FORMATION STRENGTH TEST (A) kPa SUBSEA BOP DATA:
DRILLING FLUID DENS. AT TEST (B) kg/m3 MARINE RISER m
LENGTH
MAX. ALLOWABLE DRILLING FLUID DENSITY = CHOKELINE m
(A) x 102 (C) kg/m3 LENGTH
(B) + =
SHOE T.V. DEPTH
DEVIATION DATA:
INITIAL MAASP =
KOP M.D. m
((C) - CURR. DENS.) x SHOE T.V. DEPTH
= KOP T.V.D. m
102
kPa
EOB M.D. m
EOB T.V.D. m
PUMP NO. 1 DISPL. PUMP NO. 2 DISPL.
CASING SHOE DATA:
m3 / stroke m3 / stroke SIZE mm
M. DEPTH m
(PL) DYNAMIC PRESSURE LOSS [kPa]
T.V. DEPTH m
SLOW PUMP PUMP NO. 1 PUMP NO. 2
HOLE DATA:
Riser Choke Friction Riser Choke Friction
RATE DATA: Line Choke Line Choke SIZE mm
Line Line
M. DEPTH m
SPM
T.V. DEPTH m
SPM
PRE-RECORDED LENGTH CAPACITY VOLUME PUMP STROKES TIME
VOLUME DATA: m m3 / m m3 stks minutes
DP - SURFACE TO KOP x = (L) stks
DP - KOP TO EOB x = + (M) stks
DP - EOB TO BHA x = + (N1) stks
+ (N2) stks
HEVI WALL DRILL PIPE x =
(N3) stks
DRILL COLLAR x = +
(D) m3 stks min
DRILL STRING VOLUME
DC x OPEN HOLE x =
DP / HWDP x OPEN HOLE x = +
(F) m3 stks min
OPEN HOLE VOLUME
DP x CASING x = (G) + stks min
CHOKELINE x = (H) + stks min
TOTAL ANNULUS/CHOKELINE VOLUME (F+G+H) = (I) m3 stks min
TOTAL WELL SYSTEM VOLUME (D+I) = (J) m3 stks min
ACTIVE SURFACE VOLUME (K) m3 stks
TOTAL ACTIVE FLUID SYSTEM (J+K) m3 stks Dr No SSD 03/01
(S.I.)
MARINE RISER x DP x = m3 stks 27-01-2000
PAGE 2 OF 3
DATE :
International Well Control Forum
Subsea BOP Kill Sheet - Deviated Well (S.I. Units) NAME :
KICK DATA :
SIDPP kPa SICP kPa PIT GAIN m3
KILL FLUID DENSITY 102 x SIDPP
CURRENT DRILLING FLUID DENSITY +
TVD
102 x ..........................
KMD ................. + =
......................... ............ kg/m3
INITIAL CIRC. PRESS. DYNAMIC PRESSURE LOSS + SIDPP
ICP ................. + ................. = ............... kPa
INITIAL DYNAMIC
SICP - CHOKE LINE FRICTION
CASING PRESS AT
KILL PUMP RATE = ................ - ................ = ............... kPa
KILL FLUID DENSITY
FINAL CIRCULATING x DYNAMIC PRESSURE LOSS
CURRENT DRILLING FLUID DENSITY
PRESSURE
....................
FCP x ................. =
.................... ............... kPa
DYNAMIC PRESSURE KOPMD ............
PL + (FCP-PL) x = .......... + (...........-............) x =
LOSS AT KOP (O) TDMD ............ ............... kPa
(KMD - OMD) x KOPTVD
SIDPP -
REMAINING SIDPP 102
AT KOP (P) (...............-................) x ................
= ............ - = ............... kPa
102
CIRCULATING PRESS.
(O) + (P) = ............. + ............. =
AT KOP (KOP CP) ............... kPa
DYNAMIC PRESS. LOSS EOBMD ............
PL + (FCP-PL) x = .......... + (...........-............) x =
AT EOB (R) TDMD ............ ............... kPa
(KMD - OMD) x EOBTVD
SIDPP -
REMAINING SIDPP 102
AT EOB (S) (...............-................) x ................
= ............ - =
102 ............... kPa
CIRCULATING PRESS.
(R) + (S) = ............. + ............. =
AT EOB (EOB CP) ............... kPa
(T) x 100 .......... x 100 kPa
(T) = ICP - KOP CP = ........... - ............ = ............ kPa = = .............
(L) ........... 100 strokes
(U) x 100 .......... x 100 kPa
(U) = KOP CP - EOB CP = ......... - ......... = ......... kPa = = .............
(M) ........... 100 strokes
(W) x 100 .......... x 100 kPa
(W) = EOB CP - FCP = ........... - ........... = ........... kPa = = .............
(N1+N2+N3) ........... 100 strokes
Dr No SSD 03/02 (S.I.) 27-01-2000
PAGE 3 OF 3
DATE :
International Well Control Forum
Subsea BOP Kill Sheet - Deviated Well (S.I. Units) NAME :
STATIC & DYNAMIC DRILL PIPE PRESSURE [kPa]
STROKES
PRESSURE
[kPa]
STROKES
Dr No SSD 03/02 (S.I.) 27-01-2000
