Corporate Airport Kitchen Football

Office Clubhouse Remodel Complex

Spring 2013 | $6.25

 Too Busy To Protect Your Business?
Even the best businesses can have claims.
Contact your local Federated representative
to learn about risk management tools, like fire
safety checklists, designed to help prevent your
business from going up in smoke.

Visit www.federatedinsurance.com to find a

representative near you.

Federated Mutual Insurance Company • Federated Service Insurance Company* • Federated Life Insurance Company
Owatonna, Minnesota 55060 • Phone: (507) 455-5200 • www.federatedinsurance.com
*Not licensed in the states of NH, NJ, RI, and VT. © 2013 Federated Mutual Insurance Company
 ORGANIC

M. BOHLKE VENEER
[email protected]
CORP.
www.mbveneer.com
513.682.1460
 You and your
customers will
breathe easier
knowing it’s
Formaldehyde
Free

FORMALDEHYDE FREE CATALYZED LACQUER • CONVERSION VARNISH

AkzoNobel introduces two new Formaldehyde Free products: AIRGUARD Catalyzed Lacquer and
AIRGUARD Conversion Varnish. Two innovative ways to help make sure our indoor spaces are safer places.

• Formaldehyde Free formulation

• Very low odor during application and curing
• Use in place of any standard catalyzed lacquer or conversion
varnish - no special process required
• Meets Kitchen Cabinet Manufacturers Association (KCMA) standards
• Can be used to comply with LEED, IAQ and BIFMA indoor air standards
for Formaldehyde

Visit chemcraft.com to locate your nearest distributor.

To learn more,
watch the video

© 2012 AkzoNobel Chemcraft® is a registered trademark of Akzo Nobel Coatings Inc.

 vo L . 3 3
no. 2
sPrIng 2013

8 HIGH PRESSURE
DECORATIVE LAMINATE
A plastics expert talks about solving prob-
lems using HPDL in projects.

10 OFFICE OF OVANGKOL.
Investment firm chooses unusual wood for

10
its office renovation.
Custom Woodwork: Imperial
Woodworking Company

High-Pressure
20 DESIGN FLIES HIGH.
Virgin Atlantic Air’s new Clubhouse at the
Newark Airport is comfort-oriented.
Custom Woodwork: Allegheny Millwork
Decorative
Laminates
p8

spring

20 28 36
28
New product
news, p52 A CAPTIVATING KITCHEN
Original touches remain in this
Alabama home remodel.
Custom Woodwork:
Deas Millwork Company

36 DESIGN SCORES BIG.

Iowa State University revamps
its football center.
Custom Woodwork: Huston Millwork

47 A CENTURY OF LAMINATE.
The impact of plastic laminate on the
architectural woodwork industry.

spring 2013 I designsolutions 3

 Departments
INTRODUCING 6 CORNERSTONE

MONARCH METAL’S 52 PRODUCT SHOWCASE

2013 56 AWI MANUFACTURING MEMBERS

CATALOG 69 AD INDEX

71 AWI SUPPLIER MEMBERS

AWI Officers: designsolutions

(ISSN 0277-3538) is published
PRESIDENT
quarterly by the Architectural
Michael Bell
Woodwork Institute, 46179
Allegheny Millwork & Lumber
Westlake Drive, Suite 120,
Lawrence, PA
Sterling, VA 20165. Periodicals
postage paid at Potomac Falls,
PRESIDENT ELECT
VA and additional mailing offic-
Randy Jensen es. Postmaster: send address
Leonard Peterson & Company, Inc. changes to designsolutions,
Auburn, AL 46179 Westlake Drive, Suite
120, Potomac Falls, VA 20165.
VICE PRESIDENT Address subscription corre-
Kent Gilchrist spondence to Design Solutions.
Fremont Interiors Subscription price: $25/year.
Carmel, IN
Editorial and advertising inqui-
TREASURER ries should be addressed to:
Bruce Spitz designsolutions
Classic Millwork & Products, Inc. 46179 Westlake Drive, Suite
El Paso, TX 120, Potomac Falls, VA 20165
Phone (571) 323-3636,
IMMEDIATE PAST PRESIDENT Fax (571) 323-3630.
Matt Lundahl E-mail [email protected].
Meyer and Lundahl Web: awinet.org
Phoenix, AZ
Opinions expressed in articles
are not necessarily those of
Magazine Staff: the Architectural Woodwork
Request a copy Editor: Elaine M. Ferri
Editor in Chief: Philip Duvic
Institute. Publication of
advertising does not imply

or download at
endorsement of products/
ADVERTISING COORDINATOR services. All advertising copy is
Cheryl Stratos subject to the approval of the
(703) 212-7737 [email protected] publisher; publisher reserves
the right to reject advertising.

monarchmetal.com TECHNICAL EDITOR

Greg Heuer, CSI
Unsolicited editorial materials
must be accompanied by suf-
ficient return postage. Publisher
ART DIRECTOR
Josiah Lewis reserves the right to reject
editorial copy.
PROJECT MANAGER
Katie Allen The magazine assumes no
responsibility for loss of or
Copyright © 2013 by the
damage to such material. Any
Architectural Woodwork Institute
46179 Westlake Dr., Suite 120 material accepted is subject to
Potomac Falls, VA 20165 such revision as is necessary
All rights reserved. Reproduction in our sole discretion to meet
without permission is prohibited. the requirements of this pub-
lication. Material published in
Cover: Located in the energy capi- Design Solutions remains the
Tel: (631) 563-8967 / Fax: (631) 563-8976 tal of the world, EIG Global Energy property of the magazine. No
Partners’ Houston office needed material, nor parts thereof, may
1625 Sycamore Ave. / Bohemia, NY 11716 to be transformed into a space be reproduced or used out of
that showcases the value and suc- context without prior approval
cess their services provide. It was of and proper credit to the
done through the use of beautiful magazine.
architectural woodwork featuring
Ovangkol. See story, page 10.

4 I
designsolutions spring 2013
 Embellished
Hardwood
Mouldings & IMA Schelling
is a proud partner
Woodcarvings and sponsor of
2,200 In-Stock AWI member companies,
Products providing edge banding
Prompt Shipment and cut-to-size technology.
For more information
800.558.0119 visit our web-site at
WhiteRiver.com ima.schelling.com

© Valspar 2011

Vapspar
New...Old?

Do more than you ever dreamed

possible with your woodworking jobs.
Valspar offers innovative, easy-to-use and apply products and superior support
that help bring your ideas to life. So dream it, create it, and enjoy the results.
View how-to videos and find a local distributor at Valsparwood.com

spring 2013 I designsolutions 5

 Our Mission.

cornerst ne
T H E A U T H O R I TAT I V E R E S O U R C E F O R E XC E L LE N C E I N A R C H I T E C T U R A L WO O D WO R K .

Inside Info For Design And Construction Professionals

AWI:
Your Go-To Source
For Technical
Assistance

w hat better
place to look
to than AWI
when assis-
tance is needed or ques-
tions arise about technical
issues? As the authoritative
resource on fine architec-
The new-
est technical
expert onboard
at AWI is Ashley
Goodwin,
Technical
Services
Manager.
Goodwin is an experienced
tions and provide
advice regarding
millwork projects,
and provide other
technical services
for AWI members
and their clients.
He can be reached
directly by telephone at
a concern regarding the
content of the standards,
your input and feedback
is always welcome. Any
comments or suggestions
for improvement to the
standards will be given to
the Technical Committee to
be reviewed. From there,
tural woodwork, one of the woodworker and a former 229-942-1004 or by e-mail a determination will be
major contributors to the QCP representative and is at [email protected]. made as to whether to
industry’s Architectural well versed in the techni- As always, you can e-mail move this further to the
Woodwork Standards cal aspects of architectural your help requests to help@ Joint Standards Committee
(AWS), and founding entity woodworking. awinet.org. responsible for the content
of the Quality Certification Of particular value to and publication of the AWS.
Program (QCP), help is avail- design professionals, speci- aWS content/improvement Suggestions for contin-
able for both members and fiers and building owners, AWI’s Technical Services ued improvement of the
non-members alike. Goodwin will assist with Manager also serves as the Architectural Woodwork
AWI employs several interpretations or find- staff liaison for the standing Standards can be made by
professionals who will pro- ing answers within the AWI Technical Committee filling out and submitting an
vide answers to your ques- Architectural Woodwork and the Joint Standards Improvement Suggestion
tions. And if they don’t have Standards, answer ques- Committee. If you have Form which is found on page
the answer, they will find it
out for you from one of the
organization’s experienced
and knowledgeable mem-
bers.

6 I
designsolutions spring 2013
10 of the AWS, or at the top
of the Errata site by clicking
on “Suggestion Form.”
Since Goodwin took on
this role in January 2013,
more than 100 requests
for assistance have been
fielded. These requests vary
from a limited review and
comment on project speci-
fications to helping draft Quality certification
suggestions for changes to program
the AWS and submitting As a former Quality
them to the AWI Technical Certification Program
Committee for review. inspector and QCP
Additionally, there have Inspections Manager,
been occasions when design Goodwin is available to
professionals ask for clarity provide assistance in navi-
in writing the standards into gating the accreditation
their specifications or clear- and project inspection
ly conveying a design detail processes. Working collab-
in their contract documents. oratively with the Quality
Here are some valuable Certification Corporation
technical tips regarding the staff and leadership, he will
AWS: help participants with com-
Seek assistance early. pliance/conformance ques-
If you need clarification on tions. Architects, specifiers,
something you’ve read in the and owners may also contact
AWS, don’t wait until it is too her with questions about
late to have it included in the why they should specify
ext edition. Contact AWI as and uphold the project cer-
early as possible. tification requirement and
Consult the AWS Errata maintain the Architectural
Page accessed through the Woodwork Standards as the
AWI, WI or AWMAC websites benchmark for quality mill-
or at aws-errata.com, check work in their projects.
here for changes suggested
by members and approved this Benefit is for You!
by the Joint Standards With a commitment to
Committee. Remember this customer service and con-
is not additional information tinual improvement, AWI
– it is part of the standards encourages you to tap into
and errata entries trump the this membership benefit
effected content of the AWS whenever you need assis-
book. tance or have a suggestion
New Edition of AWS for improvement. Our goal
is expected to be released is to be available and to
in 2013, so be on the lookout respond to your requests
for it. in a timely manner. We are
Contact AWI for help. listening and are here to
Send your questions to help you prevent issues from
[email protected] or call becoming problems or to
Ashley Goodwin at help solve a problem that
229-942-1004. you may be experiencing.
Let us know what we can
do for you!

spring 2013 I designsolutions 7

Solutions to Problems:
High Pressure
Decorative
Laminate
By Tony Damiano

d iners use a
lot of high
pressure
decorative
laminate
(HPDL). Many have been in
operation for decades. They
prove HPDL is an economi-
cal and long lasting surface.
Some consider laminate to
de-lamination issues
the laminate rep would
always get the call
before the glue rep. In
the photo at left the
HPDL has come away
from the substrate. Too
frequently, the client’s
first impulse is to call
the laminate supplier. In
2. “What about the brown
edge?”
Hours are wasted on
projects when clients,
specifiers and fabrica-
tors try to hide the
brown edge line of
HPDL. Here are several
solutions.
c. Color-through laminates
be the best value in surfacing fact, the problem in this can be a perfect solu-
materials. Nonetheless, no photo is an adhesive tion. Downside: limited
material is without problems. failure. color availability.
Below is a sampling of some
common HPDL issues and As HPDL collections get d. Frame the HPDL.
proposed solutions. larger and more sophisti- A picture is worth a
cated different adhesives thousand words.
and substrates are required.
For example, contact adhe- a. Compact Grade HPDL.
sives will not work well for Thicker (usually 12 mm)
resin loaded HPDLs such as HPDL can be used with
color-through and translucent no brown line, no sub-
laminates. Do not assume the strate and no adhesive.
same adhesive works for all
HPDL if you are the fabricator b. V groove. With a v
and do not assume all prob- groove on the back side
1. “The laminate failed.” lems are HPDL if you are the of the HPDL sheet a 3. “I cannot find the
Years ago I sold adhe- client. 90 deg. corner can be right color/pattern.” –
sives. One of the plus- achieved with no brown Unlimited selection is
ses to being the glue line. Downside: the now possible thanks to
rep is if there were ever corner is a bit weaker silkscreened and digital
against impact. HPDL.

8 I
designsolutions spring 2013
 taught me about pencil erasers.
They have a high coefficient of
friction but low abrasion. Taking a
pencil eraser to a mystery stain will
often tell if it is a superficial mark
or if it is really in the laminate.

6. “How was I supposed to know?”

I now keep a copy of the
Architectural Woodwork
Standards by my desk. Appendix
4. “There are cracks everywhere!” B Section 11 is often quoted. Our
This is a quote from a panicked company does over 300 luncheon
customer. There were cracks all presentations per year. At each Tony Damiano, originally from
over the backsplash of his newly HPDL presentation we recom- Boston, Massachusetts, now lives in
installed cabinets. After his brief mend the NEMA LD3-2005 stan- the San Francisco Bay area. He holds
description I asked him to remove dards and the AWS. an undergraduate degree in Italian
the covers from the electrical out- and an MBA. With this education and
lets. There he would find the begin- The above is only a small sampling with a career in plastics beginning in
nings of all the cracks. Moral of of problems and solutions. More could 1980 he joined ABET Inc. in 1993. In
the story? Never cut out an inside be said regarding proper substrates, 2001 he was asked to head ABET Inc.
corner without a radius. Never. storage, transport, postforming and which he continues to do today. ABET
maintenance. I welcome hearing from Inc. is the North American affiliate of
5. “Is this a defect in the laminate you on either your pesky problems or ABET LAMINATI laminate products. He
or a mark?” sure fire solutions (tdamiano@abet- is married and has five daughters and
My friend, Mike Weddington laminati.com). 15 grandchildren .

spring 2013 I designsolutions 9

 EIG Global Energy
Partners, LLC is a leading
institutional investor with a
30-year track record of investing
in energy, resources and related
infrastructure areas. During
its 30-year history, EIG has
invested in aggregate over $14
billion in the sector through
290 projects or companies in
33 countries on six continents.
EIG’s clients include many of the
leading pension plans, insurance
companies, sovereign wealth
funds, university endowments
and other funds. EIG is Investment Firm
headquartered in Washington, Chooses Unusual
D.C., with offices in Houston, Wood Décor.
London, Sydney, Hong Kong,
Seoul and Rio de Janeiro.

10 I
designsolutions spring 2013
 A view of the total space
illustrates how the beautiful
paneling gives the offices a
professional image of strength
and tradition.

Ovangkol.
Office of

spring 2013 I designsolutions 11

 In a recent relocation and
In addition to our renovation of the company’s
Houston, Texas, office, the
quality craftsmanship and design firm PDR (Planning
on time delivery, we provide Design Research) of Houston
was commissioned to over-
personalized service from see the design, while the
architectural woodwork
our team of experienced and was supplied by Imperial
Woodworking Company, an
responsible professionals. We AWI member firm located in
pride ourselves on meeting even Palatine, Illinois.
The project scope includ-
the most difficult construction ed approximately 16,500
3The reception area makes square feet on the 35th floor.
a remarkable statement schedule without sacrificing The project took almost 12
with its elegant Ovangkol months from inception to
paneling and custom desk. quality and performance. completion.

– Frank Huschitt III

President

spring 2013 I designsolutions 13

 at a
Located in the energy
glance
capital of the world, EIG’s AWI MAnufActurIng
Houston office needed MeMber:
to be transformed into a Imperial Woodworking
space that showcases the Company
value and success their ser-
LocAtIon:
vices provide. EIG sought to
improve their presence from Palatine, Illinois
the public corridor and visi- estAbLIshed:
tor experience, provide bet- 1963
ter lighting including more
natural light, incorporate fAcILIty:
wider paths for improved 71,000 square feet
circulation, and introduce all
new furniture and furnish-
ings while maintaining and
enhancing their existing According to Stuart Harris
culture. of PDR, “the design team
created a more modern
Design Objectives approach to the traditional
Primary design consid- design found in other EIG
erations included turning offices. Constrained by the
the space into high qual- existing footprint, the entry
ity, functional offices that and reception is positioned
present an image that is to allow employee offices to
successful and profes- be grouped together while
sional. Acoustical privacy the visitor-facing areas are
was necessary for the client located on the other side.”
experience, and technology
and audio/visual capabili-
ties needed to be integrated
into the design.

290"

20" 250" 20"

12"
84"

60"
12"

PLAN VIEW
Executive Conference Table

14 I
designsolutions spring 2013
 The conference table features a
sketch face with an inlay of brass.

spring 2013 I designsolutions 15

 The office has generous Sidelites are tall, narrow and Wood, Key Element
corridors and clear circulation deep to provide visual privacy “Wood conveys numer-
pathways for employees and while allowing natural light to ous contextual elements
visitors. The nature of the work pass through to the interior important to how we project
employees perform requires spaces. our professional image, to
acoustical and visual privacy The War Room, a confer- include strength, tradition,
in offices and meeting rooms. ence room that is multifunc- solidity and permanence,
Offices are arranged to tional and used for live meet- among others,” states
reflect the business dynamic. ings, videoconferences, train- William Thierbach, executive
The arrangement of the exte- ing and working sessions, is director of EIG. “Woodwork
rior offices provides employ- centrally located between the also conveys warmth and
ees with direct and dramatic executive wing and the cof- harmony and provides the
views of the cityscape below. fee bar. integral foundation for other
ovAngkoL

Wood sidelites are tall, narrow and deep

to provide visual privacy to offices while
allowing natural light to pass through to
the interior spaces.

16 I
designsolutions spring 2013
 90-3/4"

1/4" 90-1/4" 1/4"

3" 36" 6-1/8" 18" 6-1/8" 18" 3"

2-3/8"
2 3

PLAN SECTION DETAIL

1
@ Typical Office Entry

elements, finishes and ricated veneer wall paneling, “We took care to select
conditions in the space. Our ceiling panels, reception a veneer that suited our
objectives for using woodwork desk, doors and conference corporate aesthetic – one
reflected both professional tables for the space. “Doors we feel is traditional, yet
and aesthetic considerations.” and conference tables both modern and sophisticated,”
Ovangkol with a lot of have a sketch face with a says Thierbach. “We believe
flash (crossfire) was used for brass inlay. Finish was cata- the Ovangkol log we chose
the whole project, explains lyzed medium stain conver- suited that goal ideally. In
Garrett Spencer of Imperial sion varnish.” addition to selecting a veneer
Woodworking. Imperial fab- with strong character, we also
chose a simple, clean design
for the woodwork, including
90-1/4" a matte finish with a specific
6-1/8"

3" 36" 18" 18" 3" level of grain fill. Imperial did
3" 3" 3" 3"
an exceptional job securing
numerous, high-quality logs
from which to choose.”

1
99-3/4"

113-1/2"
37-1/2"

7-5/8"

DETAIL ELEVATION
@ Typ. Office Entry w/ Side Light

spring 2013 I designsolutions 17

 Quality
Without
Compromise
We’ve seen many changes over the last 50 years, but some things still remain the
same: Our commitment to and focus on quality, service and craftsmanship.
We’d like to thank our dedicated employees, loyal customers, steadfast business
partners, and dependable vendors, without whom we could not have achieved
such accomplishments.

310 North Woodwork Lane | Palatine, IL 60067 | 847-358-6920 | ImperialWoodworking.com

18 I
designsolutions spring 2013
 1/2" GLASS
Making It Happen Spencer echoes the sen-
“Our relationship with timent. “There was great
Imperial Woodworking was continuity in our relationship

2-7/16"
3/4"
collaborative from the outset with PDR. The PDR team was
which was invaluable in pro- great and we thought that
ducing a job that was right from the very first meeting.

3-1/8"
on in terms of quality, budget We listened to what the cli-

8"
and schedule,” notes Harris. ent’s needs were and we
“Imperial produced numer- responded perfectly.”
3/4" ous mock-ups, large and “Based on my experi-

2-7/16"
small, samples and drawings ence managing several other
to assist us in making the projects of similar magnitude
1/8" right decisions during design for our firm, I believe that
3" 3" 3/4"
implementation. Imperial Imperial Woodworking truly
6-1/8"
took the time to understand went above and beyond nor-
our design intent and, during mal course on our project,”
SECTION DETAIL
3 the implementation phase, summarizes Thierbach. “At
@ Jamb, Strike Side offered fabrication and every step we had significant
design ideas that supported participation at the most
our concept and what was senior levels, ensuring the
Of Special Note constraints, to deliver this best for the project.” project stayed on course and
The doors and conference showpiece in perfect condi- was delivered as promised.”
tables with inlaid metal were tion, functioning flawlessly. It
the most noteworthy items of was a Herculean undertaking. 3" 1/8"
the project, says Harris. Also That said, we truly feel that 3/4" 1-1/2" 3/4"
of note were the glass fronts all of the work in the space is 3/4" 3/4"
to offices and conference exceptional, with additional

1/16"
rooms which included veneer special note to the office
and solid stock elements doors and reception and exec-
1-1/2"
5/8"

that considered the book- utive assistant workstation.”

2-1/4"
matching rhythm as it moved Challenges came at the
across the doors. “In all woodworking firm with the

1/8"
cases, the veneer selection sketch-face doors, conference
5/8"

and layup was thoughtfully table and ceiling, reports

LOOSE
considered to achieve the Spencer. “There were a ton of

3-1/8"
2-5/8"

8"
STOPS
best visual appearance.” variables with floor heights in
Without a doubt, says variance of up to two inches
Thierbach, the main confer- throughout the space without
ence table gets the favorite a location to change height.
5/8"

PLYWOOD
2-7/16"

vote. “This massive, 20-seat The ceiling was locked in and

3/4"

BLOCKING
table involved many disci- veneer widths required some
plines with regards to design, incredible juggling on sizing
engineering, audio visual, to make it all aesthetically 1/8" 3" 3/4"
fabrication and installation. pleasing.”
Everyone worked harmoni- SECTION DETAIL
ously, under severe schedule 2
@ Jamb, Hinge Side

Project: Project oWner: WoodWorker: desIgner: generAL contrActor: PhotogrAPher:

Offices of EIG EIG Global Imperial PDR HITT Contracting, Inc. Mark Scheyer
Global Partners Partners Woodworking Houston, TX Falls Church, VA Houston, TX
Houston, TX Washington, DC Company
Palatine, IL

spring 2013 I designsolutions 19

f ounded in 1984, Virgin Atlantic Airways, with 38 aircraft
in its fleet, is one of the world’s leading long-haul airlines.
Offering service to destinations worldwide, the airline has
pioneered many travel innovations. Virgin Atlantic recently
received a number of travel trade awards, including, for the
fourth consecutive year, Travel Weekly’s Best International
Airline, Global Traveler’s Best Airline for Premium Economy
Class, and for the first time, CNN’s Best Airport Clubs/Lounges for the
Clubhouse at New York’s JFK airport.

20 I
designsolutions spring 2013
Design
Virgin Atlantic
Clubhouse Caters
to Passengers.

Flies High spring 2013 I designsolutions 21

 Virgin Atlantic Clubhouses Jersey, Liberty International Callie Tedder-Hares of Virgin Perfect Space
are an important key brand Airport. The architectural Atlantic. “The 5,000 square Once guests have cleared
differentiator for the airline. woodwork for the project was foot space functions as a security, they can check
They play an important part fabricated by AWI member hybrid of iconic downtown into the airside Clubhouse.
in the overall passenger jour- firm Allegheny Millwork, typology – café, theatre, art A constellation of sparkling
ney and experience, giving located in Lawrence, gallery, restaurant, club, bar pinpoint lights draws you into
the customer the positive Pennsylvania. and lounge. To allow guests the sculpted entry passage-
“high” at the start of their trip. “In designing the the maximum time for relax- way. Punctuated by a sky-lit
In light of that importance, Clubhouse at Newark, we ation before boarding, in the receptionist at a spectacular
Virgin Atlantic recently com- sought to create a relaxed Clubhouse, wherever guests desk, the entry sequence
missioned Slade Architecture luxury space with a rich choose to sit, every need is creates an extended decom-
of New York City to design the and distinctly downtown anticipated and met.” pression zone between the
clubhouse at Newark, New Manhattan feel,” explains busy terminal and the relaxed
luxury inside the Clubhouse.

22 I
designsolutions spring 2013
 The Clubhouse is orga- Pillows examine the urban The design relies heavily
nized around a faceted bar landscape at different scales. on the millwork, Slade con-
that rises in the center of the Graffiti inspired wallpaper in tinues. “Because of the site
lounge, culminating in a crys- the bathroom area is illumi- limitations, millwork allowed
tal bottle display under the nated by glowing resin sinks. us to fabricate quite intricate
central skylight. The geom- The more time you spend and complex geometries off-
etry of this display ripples exploring the lounge, the more site. The aesthetics could not
across the ceiling, creating it unfolds and reveals itself. have been achieved in any
an abstract geometric canopy “The existing space has other way.”
that spills up into the two no exterior views,” explains
skylights. architect James Slade. “We Intricate Woodwork
wanted to create an interior Allegheny Millwork fab-
landscape of views with the ricated for the project the
bar as the central focal point. leather upholstered custom
red oAk Access to the airside lounge seating, the “passion pit”
was a major obstacle for the seating, the multi-level, multi-
construction team because faceted bar and back bar
A series of distinct spaces of the tight TSA and customs with faceted mirror, and the
pinwheel around the bar regulations. In addition there faceted wall system clad in
– a wood-lined café, curtain- was no freight elevator so cement board, reports Rex
wrapped screening room, everything had to be deliv- Coen, project manager.
gallery-like brasserie, and a ered through a window about About half of the walls
colorful origami lounge. Art is 25 feet above exterior grade, are woodwork, including the
central to the downtown vibe on the jetway.” lounge and large sections
of the space. Digital finger of every other area. Much of
paintings of lower Manhattan the furniture is also millwork,
commissioned from New York from banquets to the bar to
artist Jorge Colombo animate the countertop in the liquid
the café. The restaurant fea- lounge and the brasserie.
tures mixed media works of
discarded travel photos.
SINK ABOVE BLACK MELAMINE
NO SHELVES

DIPPER WELL
WITH FAUCET BLACK MELAMINE
(2) ADJUSTABLE
"

SHELVES
16

FLAT CUT AMERICAN

RED OAK VENEER
"
19

67-1/
4"
28"

1/2" THICK
NATURAL GREY
4"

WALL COVERING B.O.

1/

ON 3/4" SUBSTRATE CORIAN, SOLID

7-
12

SURFACE
62"

86-1/2"
"
62

176"
RICHLITE 3/4" THICK BLACK SLATE
33"
18"

3-1/2"

SECTION PLAN
@ Bar

spring 2013 I designsolutions 23

 Coen notes that clear “Scheduling was very into drawings for approval
Red Oak veneer stained to tight. We worked closely with and production. We assisted
match the wall covering was the architect early on with with means and methods of
used throughout the space, drawing review meetings in fabrication, especially with
rich-lite countertops, cement order to get production roll- the faceted back bar.”
wall paneling and column ing,” Coen says. “We took There were some chal-
surrounds as well as fabric- the modeling files from the lenges with the installation,
wrapped wall panels. architect and re-created adds Coen. “One was the
The bar and back bar them in 3-D, translated that short install time which
were very complex, he adds,
because of the multi-facets 6-3/4" 3" 3" 3" 21"
and the exact fit required due
to the mirrored interior. Also
a challenge was the stainless
steel pod since it had an intri-
16"

cate interior and a conically

shaped oval work surface. LIGHT B.O.

Tedder-Hares believes
34"

the bar illustrates exquisite

5"

craftsmanship. “It is clev-

11"

erly designed and stunningly

18"

executed. The angles are

13"

crisp and perfect. Allegheny 2-3/4"

3/4"
27" 3"
7"

paid attention to the smallest

of details and matched up
grain at some very challeng-
ing angles, and the joints are
nearly invisible. It is a work ALUMINUM
ANGLE
of art.”

INTEGRAL BASE B.O.

SECTION
@ Bar

24 I
designsolutions spring 2013
at a
glance
AWI MAnufActurIng
MeMber:
Allegheny Millwork has not only invested
Allegheny Millwork
LocAtIon:
heavily over the years in state of the art
Lawrence, Pennsylvania technology to improve efficiencies, but we have
estAbLIshed:
also invested heavily into the training of our
1979
fAcILIty:
craftsmen in order to preserve the true art of
80,000 square feet woodworking.

– Rex Coen,
Project Manager

The clubhouse is organized around a faceted bar that rises in the center of the lounge,
culminating in a crystal bottle display under the central skylight.

spring 2013 I designsolutions 25

required meticulous care the lounge was through a rience,” says Slade. “They the design and allowed them
with logistics and scheduling. window 25 feet above the were really committed to to achieve the tight toler-
The second was that besides ground.” achieving the design without ances that were required.”
being located in a major compromise. They came up In the passion pit area, he
international airport, with Flight Team with proposals for alterna- continues, Allegheny fabricat-
numerous security require- “Working with Allegheny tive means and methods that ed a fuselage of plywood ribs
ments, the only access to Millwork was a fantastic expe- maintained the integrity of as a support for the cement

Project: Project oWner: WoodWorker: ArchItect: generAL PhotogrAPher:

Virgin Atlantic Port Authority Allegheny Slade Architecture contrActor: Anton Stark
Clubhouse, of New York and Millwork New York, NY Shawmut Design Harrogoate, UK
Newark Airport New Jersey Lawrence, PA and Construction
Newark, NJ Newark, NJ Boston, MA

26 I
designsolutions spring 2013
 3/4" FRAMING
FIXED MIRROR

25"
REMOVABLE
TWO-WAY
MIRROR

71-3/8"
18"

LA-X

16"
LIGHT

113-3/8"
14"

16"

LA-X 1-1/2"
LIGHT
3"

2"

1/2"
THICK EB ACCESSIBLE PLYWOOD
NATURAL BACKLIT PANEL SUBTOP
GREY
CORIAN, 16"
SOLID
SURFACE
36"
42"

42"

BASE
B.O.
4"

2" 2"

SECTION
@ Bar Crystal

board panels. “This was an innovative way to achieve what we

had designed.”
Coen echoes the sentiment of great teamwork. “We had
a strong relationship with the architect. There was frequent,
open communication. We had a good rapport and they relied
on our input.”
“Allegheny Millwork was an absolute pleasure to work with;
a friendly, positive and highly skilled team,” adds Tedder-
Hares. “They were fabulous in detailing the millwork, coming
up with solutions on site and were always one step ahead of
the schedule. Thanks to them we have truly beautiful architec-
tural woodwork. We would work with them again in a heart-
beat.”
Opened in November 2012, the Virgin Atlantic Clubhouse at
the Newark Airport brings together New York City’s downtown
flair and Virgin Atlantic’s warmth and individuality.

spring 2013 I designsolutions 27

 e veryone knows how important
a kitchen is to a home. It’s where
everyone gathers, the place to
entertain, and where the cook
of the family spends most of his
or her time. So when the time
comes to renovate or update your
kitchen, you want to make sure you go to the right
people who will get it done right.

28 I
designsolutions spring 2013
Captivating

Kitchen
Everything Old Is New
Again in Home Remodel.

spring 2013 I design

d solutions
designsolutions
esignsolutions 29
30 I
designsolutions spring 2013
 at a
That’s what Joan Dixon
of Alabama did when she
The woodworking firm
did such a great job on the
glance Deas explains that his
team salvaged old tongue
decided to renovate the design process that Dixon AWI MAnufActurIng and groove ceiling boards
kitchen in her century-old asked the firm to step in MeMber: that had been behind a dry-
house. Wanting to match when problems arose with Deas Millwork Co. wall ceiling, cleaned them
the old wood and retain the original contractor. So the up and then made more
LocAtIon:
the architectural integrity of contracting aspects of the material to match. “The origi-
Semmes, Alabama
the house, Dixon consulted project were also handled by nal boards had many coats
an interior decorator. The Deas Millwork. estAbLIshed: of paint on them that had
decorator directed her to an 1998 cracked and chipped away.
architectural woodwork firm Ornate Mouldings We put a faux finish on the
she had previously worked In addition to needing servIces: new material to match the
with that left her highly new cabinets the house had Full service custom original which aided in the
impressed with their crafts- ornate Fir mouldings that millwork and consistent look.”
manship. That firm was Deas needed to be replicated. casework Prior to installation of the
Millwork Company, an AWI According to Zach Deas, his new ceiling the new and old
member firm headquartered company has more than material was intermixed to
in Semmes, Alabama. 4,000 knife profiles in stock create a seamless appear-
Deas Millwork designed so they would be able to ance.
the entire project which match anything in the Dixon
included the bathroom, house. All of the antique
solarium, kitchen and tran- mouldings from the origi-
sitional areas into and out nal part of the house were The woodworkers salvaged old tongue and groove ceiling boards that
of the house. The firm also matched in the remodeled had been behind a drywall ceiling and refinished them.
fabricated and installed the area. This included doors,
architectural woodwork as standing and running trim
well. and custom built screen
doors.
The Design
At the inception of the
project, Dixon had several
simple design drawings from
a residential designer; how-
ever, they were not very “We have made substantial invest-
detailed. “During our process
of generating shop draw-
ments in equipment and tooling,
ings for the casework and like our new five axis CNC router
the millwork, we ultimately
redesigned the entire project and our new five head moulder with
and assisted in molding the
project into what it would over 4000 knife profiles. We are
eventually become,” reports
Zach Deas.
prepared to address any need.”

– Zach Deas, Owner

We have made substantial
investments in equipment and tool-
ing, like our new five axis CNC router
and our new five head moulder with
over 4000 knife profiles. We are pre-
pared to address any need.
– Zach Deas, Owner
spring 2013 I designsolutions 31
 Another millwork detail
that required special atten-
tion involved the linen
cabinets in the bathroom. An
antique pair of louver-over-
panel doors was salvaged,
disassembled, resized than
reassembled for use as thick
doors on the linen cabinet.
The linen cabinets needed
more than these two doors
so new doors were also fab-
ricated and matched in both
texture and finish so all the
doors look like they are 100
years old.

Maple Cabinets
Cabinets in the kitchen
are all Maple, frameless,
full overlay with mitered
doors and applied mitered
finished ends. The wall
cabinets extend all the way
to the ten-foot high ceiling.
“We installed LED lighting
under the wall cabinets and
inside the corner cabinets,”
Deas reports. “The lighting
comes on when you open the
doors.”
All the cabinets have a
cream, conversion varnish
finish with a two color glaze
applied between the sealer
and the top coats. Interiors
of the open cabinets are
finished to match the exteri-
ors, while the interiors of the
closed cabinets have a clear
finish.

32 I
designsolutions spring 2013
Hand-crafted tile over
the sink and new countertops
add an antique elegance.

spring 2013 I designsolutions 33

 The drawer boxes are
solid Maple, dovetailed and
finished clear with soft-close,
under-mount hardware. All
the appliances have mitered
panels that match the doors
and drawer fronts. The cabi-
nets are topped with an onyx
countertop and handmade
tile backsplash.

Real Partners
It was truly a delight to
work with the owner on this
project, says Deas. “It is not
very often you have a cus-
tomer who knows what they
want, and has the budget to
obtain it. We are extremely
pleased with the outcome
of the beautiful woodwork
which highlights all the other
elegant elements in the
house – hand-blown glass
lighting, handmade tile in the
shower, antique slate roof
tiles as flooring, a concrete
vanity top, and hand-painted
wallpaper in the back of the
bookcase.”
As Deas sums it up, “there
are certainly facets of this
project that I will probably
never encounter again, but if
we do I know we can handle
them and even exceed the
expectations of the customer.”
Through weekly meet-
ings and consultation with
the millwork company, along
with a few design modifica-
tions, we achieved wonderful
results, says Dixon. “I am par-
ticularly pleased that we were
able to retain the old wood
and the beautiful appear-
ance of the matching wood
as well.”

Project: Project oWner: WoodWorker: PhotogrAPher:

Kitchen Renovation Joan Dixon Deas Millwork Co. Clayton Roberts
Mobile, AL Mobile, AL Semmes, AL Mobile, AL

34 I
designsolutions spring 2013
 Why European Beech?
Sustainability: Europe’s forests are increasing at 2 times
the rate of North American forests.
Pollmeier Beech is PEFC & FSC certified.
Availabilty: European Beech is the most available and
sustainable temperate hardwood on the planet.
Machinability: Although Beech is hard and strong, it
machines 96% perfect parts and holds a fine edge better.
Yield & Throughput: Beech has fewer defects-wider
widths and will increase both yield and throughput.
Affordabilty: Beech will provide a lower output cost in
most products.

North American Sales Office

Toll Free: 866-432-0699
US. 503-452-5800
www.pollmeier.com/perfect-hardwood
www.european-beech.com
www.pollmeier-usa.com

Pollmeier now has an accredited online continuing

education course for architects, designers and specifiers.
Check it out!
* It’s Free
* Provides AIA and state credits
* Qualifies for HSW

European Beech: Durable, Sustainable, and Versatile

www.aecdaily.com/sponsor/pollmeier

spring 2013 I designsolutions 35

t he Iowa State
University
Cyclones
now have
something to
whirl about.
The college
football team now
trains and plays in a
recently-dedicated,
$20.6 million, 60,000
square-foot addition to
the Bergstrom Football
Complex in Des Moines.
The complex is named
after the lead donors for
the project, Steve and
Debbie Bergstrom of The
Woodlands, Texas.
 Design
Scores

Big
Iowa State Football
Complex Made Strong
By Many Wood
Features.

spring 2013 I designsolutions 37

een monitor

ng their way.

d wall that

and

A kiosk of Red Oak blocks, hand

assembled, houses a touch screen
monitor to check on Cyclones news.

38 I
designsolutions spring 2013
 at a
The revamped complex is At the dedication cer- “The now-completed glance
“a celebration of our vision,” emony, Iowa State President Bergstrom Football Complex AWI MAnufActurIng
says Director of Athletics Dr. Steven Leath stressed stands as a proud symbol MeMber:
Jamie Pollard. “It was that the importance of top-notch of the commitment to excel- Huston Millwork
vision for success that led us facilities and expressed his lence in intercollegiate athlet-
to bring Paul Rhoads back support of the project and ics at Iowa State University,” LocAtIon:
to Iowa State. Certainly, the of dedicating the building Leath said. “More important- Grimes, Iowa
success we have experienced on Homecoming “Cytennial” ly, it makes a huge statement estAbLIshed:
on the field in concert with weekend. about how much this univer-
1985
record-breaking fan support, sity and our national family
has positioned us for a bright of Cyclone fans appreciate all servIces:
future. We are grateful to the that Iowa State student ath- Design and
Bergstroms for their gener- letics, coaches and everyone Development, Value
ous lead gift, which created in the athletics department Engineering, Project
a foundation for us to move has accomplished for this Management,
forward with the project.” university.” Estimating,
Manufacturing,
Project Players Delivery and
RIFT SLICED/SAWN RED OAK
WITH CLEAR STAIN FINISH When the project began Installation
to take place, Substance
Architecture Interiors Design
of Des Moines, Iowa, was
selected to design the facil-
ity. Architectural woodwork
was fabricated and installed
by Huston Millwork, an AWI
member firm located in
Grimes, Iowa.

PLANAR TV
BY OTHERS
108"

77-1/2"

ELEVATION
@ Interactive Kiosk

spring 2013 I designsolutions 39

 The woodworking firm Team Work
supplied the paneling, desks, Jeff Sheeks of Huston
kiosk, baseboards, entrance Millwork reports that the
wall, casework, conference wood block design and struc-
tables and reception table for ture featured on the wall at
the project. A majority of the the entrance, the kiosk wall
items were produced from and the reception desks
rift cut Red Oak and were were the most challenging
blueprint matched. aspect of the project. “These
According to Jim Hoff featured various sizes of
of Substance Architecture block wood that had to be
Interiors Design, the design put together like a puzzle and
of the feature wall, desk were composed of many intri-
and kiosks were based on cacies in making the blocks
the design of the Vancouver into a design.”
Convention Center. Huston did the design
The building contains and detail work for the wood
complete high definition digi- pieces for the wall, kiosk and
tal video capabilities, a spa- desk, he adds. “The facility
cious locker room, training was opened on time and
room, post-game interview within budget. This particular
room, office complex with project had an extremely
meeting rooms, an audito- aggressive timeline which we
rium and an 11,000 square were able to meet.”
foot weight room that greatly Hoff agrees that the
impressed the players. aggressive timeline and
special technique required
to install the individual wood
42"
blocks on the various compo-
nents were difficult.
“Huston had an exception-
al working relationship with
30"

1
the architect,” notes Sheeks.
“The firm was very helpful
and maintained the intent of
2 the structure but also gave
us flexibility in executing the
PLAN VIEW design.”
Waiting Area
Coffee Table

RIFT SLICED/
SAWN RED OAK
WITH CLEAR
STAIN FINISH

42" 30"

ELEVATION ELEVATION
2 1
Waiting Area Waiting Area
Coffee Table Coffee Table

40 I
designsolutions spring 2013
 Wood block tables made
by the woodworking firm
are found throughout the space.

All of our work is fabricated in our facility in Grimes,

Iowa, by highly skilled craftsmen. Our employees have an
average of 20 years of millwork experience, and offer an
unparalleled level of customer service and professionalism.
– Jim Hoff, Project Manager

spring 2013 I designsolutions 41

Coach’s View square-foot building. Its to allow us to progress and players necessary to compete
Coach Paul Rhoads under- athletic training area boasts build on who we are as a in the Big 12 Conference.”
scores the impact of a facility leading edge sports medicine football program,” Rhoads “Complete video capa-
of the project’s scope. The capabilities and the building says. “The state-of-the-art bilities allow our coaches
previously existing indoor is fully equipped with the lat- cavernous weight room will everything they need to train
practice facility is now part of est video technologies. feed the strength, speed and and develop the minds of our
a larger structure, a 152,000 “This building is going physical development of our players,” he continues. “The

Lockers are custom made of beautiful Red Oak.

42 I
designsolutions spring 2013
locker room was built with the latest advances in hydro- The bottom line is that the commitment to excellence
the players in mind. To be therapy, preventative sports Bergstrom Football Complex that it represents and reap
successful in college football medicine and day-to-day con- is a well-equipped, comfort- the benefits of all it has to
you have to keep your play- ditioning all under the same able place to train to play col- offer.
ers healthy. The new training roof. The meeting rooms lege football 365 days a year.
room will be as efficient as possess all the latest digital Future Cyclones who use the
any in the nation. It includes technology.” facility will understand the

The sports medicine room

features beautiful yet
functional Red Oak casework.

Project: Project oWner: WoodWorker: ArchItect: PhotogrAPher:

Bergstrom Football Iowa State University Huston Millwork Substance Architecture Kevin Ruegsegger
Complex Des Moines, IA Grimes, IA Interiors Design Des Moines, IA
Des Moines, IA Des Moines, IA

spring 2013 I designsolutions 43

 FIVE GREAT 1 Helpful technical
articles and advice.
2 The only design
REASONS TO magazine that
provides drawings.

SUBSCRIBE 3 The place to learn

about designing

TO DESIGN with wood.

4 Fabulous projects!
SOLUTIONS. 5 New Products Pages.

There are plenty more great professionals, the convenience and number beginning with the letter P
reasons to subscribe to this exciting ease of useful and practical technical above your address printed on the
quarterly design publication, techniques are at the top of the list. front cover, use the form below to
including the low rate of only So if you are interested getting great begin your paid subscription.
$25 per year. design ideas through drawings and Or visit awinet.org to subscribe.
However, for many design projects, and if you do not have a

Yes! Start my Subscription to Design Solutions today!

Name_____________________________________________________________ Company _______________________________________________________________

Address _________________________________________________________________City ___________________________________ State _________ Zip _________

Phone _________________________________________________________________ e-mail _____________________________________________________________

Subscription Rate: $25 per year (four issues) Check/Money Order Enclosed (check payable to AWI) or charge to: VISA MasterCard American Express

Name on Card________________________________________________________ Signature _____________________________________________________________

Card Number __________________________________________________________________ Expiration Date ______________________________________________

Mail or FAX this form to: Architectural Woodwork Institute, 46179 Westlake Drive, Suite 120, Potomac Falls, VA 20165 OR Phone (571) 323-3636 Fax (571) 323-3630
44 I
designsolutions spring 2013
Concealed within walls and millwork, ArmorCore provides
®

unrivalled bullet-resistant protection.

• UL Listed for the full range of
protection levels
• Easily installed with basic tools
• Available cut to size
• Factory-Direct pricing
Visit our website for product
Not Just Coatings.
Complete Finishing Solutions.
information and specifications or call
us for quote on your next project.

Waco Composites, Ltd. Because an exceptional finish takes more than a great coating,
302 S. 27th Street
Sherwin-Williams provides:
Waco, TX 76710
866-688-3088 - Expert, on-site technical support
- Dedicated, knowledgeable representatives
- Design Engineering services
IDEAL FOR: - One-stop ordering for supplies and equipment
• Government and - Largest facility infrastructure for localized support and
Justice Buildings
• Health Care Facilities customized finishes
• Financial Institutions
• Law Enforcement Facilities
Find out more through your local Sherwin-Williams representative,
• Data Centers call 1-800-524-5979 to have a representative contact you, or visit
• Safe Rooms & us online at oem.sherwin-williams.com.
Storm Shelters
ISO
www.ArmorCore.com
9001:2008

ARCHITECTURAL
BLUEPRINT PANELS

expertise
Twenty-eight years of WIRE BRUSHED PANELS
LARGE SEQUENCED
AND NUMBERED RUNS

working for you.

CUT TO SIZE
COMPONENTS
FLEXIBLE VENEERS
SKETCH FACES
SIZES UP TO 5’X 12’

QUALITY PANELS SINCE 1984

(877)787-5993 precisionveneer.com

spring 2013 I designsolutions 45

 CUSTOM AND HARD-TO-FIND
ALUMINUM TRIMS & EXTRUSIONS
www.Roseburg.com
Delivering a World of Panel Options

Green Decorative Wood Panels

Supplying the Architectural Millwork Third party certified “GREEN” Decorative Panels
that are FSC, ECC and CARB Phase II compliant

industry for over 23 years include:

• Duramine Decorative Laminate Panels
• Roseburg Hardwood Plywood – CARB
1000’s of trims in stock, same-day shipping & exempt for Ultra Low Emitting Formaldehyde
resins (ULEF)
no minimum orders, we specialize in: • UltraFinish - Vinyl, paper & painted overlaid
Custom & Specialty Aluminum Trims & Extrusions • RediShelf – Cut to size shelving
• UltraBlend & SkyBlend – Particleboard
Architectural Finishes Z-Clips/Panel Hanger Tees
Slat-Wall Retro Trims Corner Guards & Kick Plates For more information contact visit our
NEW website at Roseburg.com

eagle-aluminum.com
877-650-5654 TF 800-245-1115
Decorative | Construction | Industrial
W O O D P R O D U C T S
AWI_adv_2012.pdf 1 9/14/12 4:43 PM

ROS_AWI_022713.indd 1 3/1/13 2:17 PM

Providing Hardware
and Service to the
Woodworking Industry
for Over 30 Years
C

CM

MY

CY

CMY

46 I
designsolutions spring 2013
 Author’s Note: The author wishes to thank 10-year AWI Member
Firm ABET Laminati for contributing to this article.

A Century of
Laminate. By Greg Heuer, CSI
AWI Chief Learning Officer

t he pace of
change since
2000 has been
astounding.
Look around
your office and
home. Think
of the number of things you use
every day which didn’t exist as we
entered the 21st Century.
The first 20 years of the previ-
ous century saw great innova-
tion, too. The automobile and
phenolic-fabric product was so
durable that it was also used
for drive plates and gears in the
1920-30s.
By 1927 Faber and O’Conor
had added decorative colors
and patterns to the top layer of
the laminate, simulating marble
and wood grain. The process of
improving the simple insulator
from industrial use to commercial
use as a high pressure decorative
laminate (HPDL) had begun.
truck replaced the carriage and They switched their base
wagon. The era of manned material from fabric to layers of
flight took off, and . . .Plastic brown kraft paper, the kind used
Laminate was invented in the manufacture of paper gro-
which made a significant cery store bags. The paper layers
impact on the architectural used for (in place of) mica (the are soaked in dark phenolic resin before
woodwork industry. mineral), they called it formica. being combined with the decorative layer
They left Westinghouse, creating and the clear protective layer. Those top
inVention and improVement their own company, the Formica two layers are impregnated with a clear
Two men working at Westinghouse Insulating Company, in Cincinnati, Ohio. melamine resin. This is the way most com-
came up with a substitute for the natural The product insulated the coils in radi- mon HPDL is made today.
mica mineral used as electrical insulation. os, and soon was used to make the bod- Laminate is manufactured one sheet
Herbert Faber and Dan O’Conor coated ies of the radios themselves. To this day at a time, with the many layers brought
fabric with a thermosetting resin which the product standards for laminate are set together just outside the press, slipped in
cured under heat and pressure. By 1913 by the National Electrical Manufacturers with the pressure plate on top, and sub-
they had applied for a patent on the pro- Association (NEMA) (www.nema.org) in jected to high pressure and heat.
cess and product. Because it was being its document commonly called LD3. The

spring 2013 I designsolutions 47

 of the project, and an obligation of the The laminate industry created color-
Kraft Papers (Phenolic)
design professional to help the rest of the through laminates a number of years ago.
Decorative Sheet construction team price and prepare for There are times when this solution works,
(Melamine) the production needs of the project. with some caveats. Marketed under a
Specification language similar to “ . . . number of brand names, some of the for-
from the full range of colors and patterns. mulations create a more brittle product,
Transparent . .” is not acceptable. Material costs and not suitable for the use to which the com-
Overlay Sheet
(Melamine) fabrication techniques vary too greatly. pleted work is destined.
The Architectural Woodwork Standards The most popular, and often best per-
set forth the default stipulation on a num- forming, solution for edge banding is PVC
ber of pages in Section 8-Wall Surfacing, (Polyvinyl chloride) banding made in the
Section 10-Casework, and Section same color as the face laminate. Securely
11-Countertops. fastened to the edge of the substrate after

The result is the durable surface we

know as High Pressure Decorative
Laminate (plastic laminate or p.lam  
around the shop). There are a number
of manufacturers of laminates, as you all the face laminate, PVC banding is thin,
know, and the range of colors and pat- durable, and the same color all the way
terns is wide. through.
The texture or gloss of the Finally, creative design professionals
top sheet is usually the result use the dark line as a contrast feature of
of a pressure plate in the the design aesthetic, or use a dark lami-
press. Early decorative nate face or band next to a light element
laminates were all very to minimize the appearance of the dark
glossy. Many of us can line in the finished product.
remember the counters
and table tops of the late That is not to product and performance
1940s and 1950s when say, of course, that Everyone knows a little about the dif-
laminate came in to the Premium Priced Product ferent types of laminate available. A little
most prominent use in is not available, far from it. knowledge can get you in trouble. Study
the United States. Some of the most striking the table from page 95 of the 2009 edi-
By using a textured examples of laminate design tion Architectural Woodwork Standards.
pressure plate laminate, and function are made with You can learn most of what you need
manufacturers can produce a larger range carefully selected and specified products. to know from the two paragraphs above
of gloss factors on the finished sheet, The key to success is to include those the table. As mentioned earlier, the stan-
everything from the high gloss, through products in the bid documents so every- dards are NEMA LD3, which are updated
a satin finish, to a low gloss texture often one is aware of them. every 5-10 years. As you can see from
used to simulate wood grain. The issue of the black or brown line the table, the performance of the various
has been solved by a number of design types of HPDL (except for radiant heat and
Selection and Specification professionals. Visible where the laminate impact resistance) is pretty consistent no
Because we take thousands of techni- pieces join at a change-of-direction, like matter which type is used.
cal calls at the AWI offices, we can safely the edge of a counter or cabinet door,
say the two biggest issues with HPDL are: the contrast between light colored lami- TIP #1. use light colors and pat-
1) - lack of concise, correct, and complete nates and the dark phenolic backing can terns with a matte finish for high traffic,
specification in the Contract Documents, either add to or detract from the design horizontal surfaces. The melamine top
and 2) - the black or brown line caused aesthetic. sheet turns white when it is fractured or
by the visibility of the dark phenolic base One solution is reversing the order in scratched. Dark colors and gloss finishes
material. which the pieces of laminate are applied show these effects of wear more quickly.
Laminate selection before the bid to the substrate. There are times when You will get years more use from light
documents are released is both an oppor- this is practical, and other times when it’s colors, and they will brighten the environ-
tunity for the design professional to guide not, either from a fabrication standpoint ment in which they’re placed.
his/her client to a choice which meets or because of the additional cost the pro-
both the design and functional needs cess would engender.

48 I
designsolutions spring 2013
TIP #2. use metal laminates for vertical cation between all the team members A sharp 90º corner at a sink cut-out, for
surfaces only. Metal laminates have fasci- paves miles and miles of good road. example, is very likely to be the place a
nated our industry from the day they were Manufacturers and fabricators are, for the crack in the laminate begins.
introduced. Many of them scratch easily. most part, proud and protective about
Most cannot be used effectively in high their life’s work. They want it to go well. SuBStrateS and StaBilitY
abuse applications. When used properly, They want the client to get a quality prod- Most laminate is glued to a mat-
on vertical surfaces, and properly engi- uct. Design professionals are also proud formed composite wood panel substrate.
neered to allow for movement they can of their work, and want to deliver projects The substrate of choice for under the
be stunning. which enhance their reputation. Keeping a HPDL is 45 pound medium density indus-
project secret may set you up for product trial particleboard. Just as there are a
TIP #3. Avoid deeply textured lami- failures. For example, some HPDL will not variety of types of laminate, particleboard
nates where cleaning is an issue or for permit solvents for cleaning and others comes in many densities. These standards
writing surfaces. This seems to be com- require special backer sheets. are set by our sister association, the
mon sense, but we’ve seen a number of Composite Panel Association (http://
designers who must have missed this TIP #5. compositepanel.org/). There is no advan-
advice when thinking through the project. Always tage, in most cases, to specifying any
specify, particleboard other than 45 lb. medium
TIP #4. Involve your manufacturer. use, and density board for your substrate.
Long time readers of this magazine have permit a radius on inside As we’ve learned in the previous issue
heard this from me before, and it goes corner cut-outs. Openings of Design Solutions, wood and wood
for more than laminates. Clear, Correct, in laminated surfaces must products move in relation to changes in
Complete specifications and communi- never have sharp angles. relative humidity. The kraft paper back-
!
spring 2013 I designsolutions 49
ing of laminate is a cellular product as Backer Sheets - All HPDL counter-
well. The coefficients of expansion and tops which conform to the Architectural
contraction of most horizontal and verti- Woodwork Standards now require a full
cal grades laminates are similar to those backer sheet on the underside of deck,
of the medium density particleboard. An buildup, and back side of backsplashes.
assembly of HPDL and particleboard is
usually very stable.

Expands in High
0 Relative Humidity
3
20

Low Relative Humidity Selection - The AWS specifies that

HPDL shall be Standard or Post-forming
High Pressure Decorative grade with a minimum thickness of .039
Laminate Sheet inch. Vertical grade is not allowed on
counters. Some plastic laminate manufac-
turers only offer 4x8 and 4x10 sizes This

50
will effect yields, and limit seam or joint

60
Contracts in Low
locations. Most laminates are available in
Relative Humidity High Relative Humidity 3, 4 and 5 foot widths and lengths up to
12 feet.

Unless the component is very well con-

strained, it is almost always a bad idea
to put laminate of veneer core plywood The Wilson House:
as a substrate. NEMA LD3-2005 states:
“Plywood . . . dimensional movement is
significantly different than high-pressure
laminate. This may result in potential
panel warpage, stress cracking, and open
seams.”
For HPDL Countertops the Default
Stipulation in the Standards is “Custom Ralph Wilson used his home in
Grade” unless otherwise specified. This Texas as a proving ground for his
grade usually matches the casework upon company’s laminate products. A
which it is mounted. short, informative video, hosted by
Core Materials - Substrates may be design historian Grace Jeffers, tells
veneer core plywood at wet areas or sink of the remarkable design innova-
tops only if the owner insists and is will- tions preserved in this 1959 struc-
ing to accept telegraphing. Plywood core ture. In the 1950s laminates were
must have a Type II adhesive. used primarily for counter and table
A better choice is Particle Board, tops. The Wilson House showcased
especially the moisture resistant variety laminate clad casework and wall
with a 24-hour swell factor of 5% or less paneling for the first time. View the
and 24-hour water-absorption factor of video at http://www.wilsonart.com/
10% or less. This core must be used for wilsonhouse.
the entirety of the assembly, including
splashes. Not just the leg or run that
includes the sink.

50 I
designsolutions spring 2013
 While the material makeup is the same from all manufactur- Page 298 of the AWs shows the wide variety of backs-
ers, costs can vary widely now, especially with “Premium” and plash assemblies:
“High Definition” finishes.
For HPDL Countertop edges there are many design and func- HPDL TOP OPTIONS HPDL DECK OPTIONS
AT SPLASH AT SPLASH
tion options. The most common is the self-edge, shown on page
297 of the AWS:

Self-Edged No Splash Self-Edged With Butt Splash

Wood edges are durable and can be refinished:

Pvc edge can be so thin they are nearly invisible, or

thicker 3 mm Pvc can add a decorative and durable element
to the edge. t-mold is still used in some sectors:
Laminate assemblies can be fire rated. for a class
1 rating, the assembly must have:
1 - Class 1 Fire Rated HPDL
2 - Class 1 Fire Rated Substrate
3 - Class 1 Fire Rated Backer Sheet
4 - Rigid Set Glue Line

Special chemical resistant laminates are manufactured

by some companies. They have performance characteristics
particularly suited for laboratory and scientific applications.
  Fire rated laminate and chemical resistant laminate cannot be
formed or radiused.
ralph Wilson pioneered the techniques of post-forming Finally a word about costs. Keep in mind laminates vary
laminates using heat and pressure to mold the plastic to pre- greatly in price. Familiarize yourself with the true costs of that
pared substrates for waterfall and cove effects. these types special material when preparing your project budgets and esti-
of counters, when well made, are among the easiest to keep mates. Laminate distributors will be delighted to help you learn
clean: about their lines.
That said, remember materials are usually about one-third
of the total cost of the project; the other two-thirds being
labor. When the design needs a specific look-and-feel that only
expensive laminate can offer, go for it. It will have a long, useful
life in service.
Fully Formed No Drip Waterfall Edge For more information on plastic laminates, read the guest
With Coved Splash With Coved Splash article on page 8, or contact one of AWI’s supplier members
who supply laminates – the supplier member list appears on
page 71.

spring 2013 I designsolutions 51

Product Showcase
BROOKLYN HARDWARE:
Light-weight Panelclip®
Brooklyn Hardware LLC
has produced revised panel
hanging hardware to accom-
pany the popular Panelclip®
Classic. The new profile,
called Panelclip® Second
Edition (SE) lowers customer
GEMINI COATINGS: shipping costs while still
Max Cat Topcoat providing the same security,
Gemini’s Max Cat ease of installation, channel,
premium pre-catalyzed hole placement and mate-
topcoat represents rial thickness as the Classic
a leap forward in user- Panelclip .
friendliness and coating “This strategic alliance By simply removing an
technology, fusing the best VALSPAR: is the beginning of a long inch of aluminum from
qualities of Gemini’s water Adds Distributor term partnership between the non-locking edge of
white coatings with its Valspar is pleased to Valspar’s Wood Division and Classic Panelclip®, Brooklyn
extremely durable conversion announce that Rodda Paint Rodda Paint Company. We Hardware is helping the
varnish series. The blending Company is now a distributor feel the Valspar products will construction, sign, product
of these two technologies of its complete line of enhance our already strong manufacturing and art indus-
creates a product with the wood coatings, including wood coatings program tries. Because Panelclip® SE
application properties of stains, varnishes, lacquers, and will give our sales reps is lighter; it reduces customer
a pre-catalyzed topcoat, topcoats and other finishing and customers a diverse unit costs while easing and
while obtaining some of the products. Rodda Paint will quality product offering.” shortening project installa-
performance characteristics provide Valspar wood coating said Bill Boone, President tion time and mates perfectly
normally associated with products and technical and COO of Rodda. “Forging with the Panelclip® Classic,
post-catalyzed coatings. service to professional this relationship will also so stocks of either product
Couple this with expert woodworkers, cabinetmakers allow us to offer a full line can be used together. Clients
support from Gemini’s and millwork producers of high demand, advanced report added satisfaction
industrial distributors and throughout the region of technology waterborne with the new product and
you have superior pre-cat Oregon, Washington, Idaho, coatings to the marketplace.” substantial cost savings.
performance. For more Montana and Alaska. For additional information,
information on Max Cat or Both companies have photos and installation
other wood coatings call long traditions of providing videos, or to request a free
800-262-5710 or visit high quality residential and sample kit of all of Brooklyn
gemini-coatings.com. commercial products, service, Hardware’s products, visit
and support. Rodda Paint Co. panelclip.com.
has been in business since
1932 as a supplier to the
cabinet and furniture industry
while the Valspar Corporation
has produced paints and
coatings for more than 200
years.

52 I
designsolutions spring 2013
SHERWIN-WILLIAMS:
Formaldehyde-Free Products
F3 products from Sherwin-Williams help wood finishers
breathe easier regarding regulatory and customer concerns
about formaldehyde. A next-generation solution for formal-
dehyde-free finishing, F3 products are catalyzed technologies
that offer the same performance and appearance of conven-
tional technologies without the concern of formaldehyde.
The F3 line of Sher-Wood® products includes high-build EAGLE MOULDINGS:
pre-catalyzed lacquers, pigmented primers and topcoats New Aluminum Trim
conversion varnishes, and sealers, and all products drop Eagle Mouldings introduc-
right into es a new custom aluminum MONARCH METAL:
your cur- architectural trim with a satin Web Tool
rent process anodized outside corner with Monarch Metal has
without the a clean look that is designed launched a web tool to help
need for new to be used with 3/4” wall customers choose the right
equipment or panels. Based on what mill- Monarch Z Clip for their hang-
any process work and display customers ing application. The Monarch
changes. Eliminating formaldehyde also significantly reduces were requesting, this trim has Z Clip Selector Tool asks
odor, and F3 products help to improve the working environ- an outside corner with two the user to input the environ-
ment while minimizing odor complaints during unpacking or exposed 1/4” legs and a 1/4” ment of the project (indoor
installation of finished products. Helping finishers more eas- x 1/4” notch in the center. / outdoor), the clearance
ily gain LEED-IAQ credits and meet evolving regulatory and Eagle has also designed between the top of the panel
consumer demands, F3 products from Sherwin-Williams helps an accompanying architec- and the finished ceiling, the
wood finishers breath easier about formaldehyde. tural “J” trim that is used material and thickness of the
For more information, visit www.oem.sherwin.com. in combination with the new panel and the substrate of
outside corner. This trim is the mounting surface. The
used as a top/bottom cap tool then returns a recom-
for the panels as well as an mendation of which Monarch
WACO: inside corner. The “J” trim Z Clip to use, what screw to
ArmorCore® Bullet Resistant Material comes in a matching satin use with the panel clips on
Increasing numbers of homeowners are seeking protec- anodized finish and has the the rear side of the panel and
tive environments within their residences and discover- matching exposed 1/4” leg. what screw to use for the
ing the unique benefits of ArmorCore® fiberglass panels. See this and all Eagle’s continuous lengths along the
Manufactured to meet the stringent ASTM “Forced Entry architectural trims at eagle- wall.
Protection” standards, ArmorCore® bullet resistant panels aluminum.com under In addition, the Monarch Z
are an ideal choice for residential safe rooms, providing pro- Architectural & Display Clip Selector Tool gives load
tection from a wide range of firearms and cutting tools. Fixtures. Orders are shipped bearing information related
Above-ground protective structure the same day coast to coast to the third party shear test-
storm shelters constructed with from our central ware- ing that Monarch recently
ArmorCore® panels can provide house in Minneapolis, conducted on its panel hang-
critical protection from the Minnesota. Eagle has ing system. Find more info at
primary danger of tornados: been providing spe- monarchmetal.com or call
debris picked up by strong cialty and custom alu- 631-563-8967.
winds with enough minum trims and
force to perforate even extrusions to the
masonry walls. architectural wood-
Test results of working industry
ArmorCore® Level 3 panels by as well as the store
the Wind Engineering Research Center at fixture and display
Texas Tech University indicated that the fiberglass panels industries for almost 25
can withstand a 15 lb. 2X4 wood board cannon fired at years. If it can be extruded,
100 miles per hour – a force consistent with a “large missile” we can deliver it.
typical of an EF-5 tornado.
To learn more about why ArmorCore® panels are the pre-
ferred defensive architecture product for government facilities,
commercial buildings and residences, visit armorcore.com.

spring 2013 I designsolutions 53

 INTEREST. INNOVATE. INFORM.

AWI SPEAKERS BUREAU

IS THE VOICE OF THE
WOODWORKING INDUSTRY. ADSERVCO office:
Cracow, Poland
phone: 011 48 12 637 48 49
[email protected]
www.adservco.com

The AWI Speakers Bureau offers a variety of informative

AIA/CES-approved programs that will add vigor and
interest to your next meeting or seminar. Presented by
architectural woodworking experts, topics are tailored
Autodesk software training and
for architects, designers, contractors or chapters.
certification related to industry
Collaboration and workflow solution
GO TO AWISPEAKER.ORG AWE MANAGEMENT office:
TO MATCH YOUR East Stroudsburg, USA
Phone: (201) 870 2666
EDUCATIONAL NEEDS. [email protected]
www.awe-management.com

expertise Welcomed Please send your idea for an

article to our editor, Elaine Ferri
Design Solutions would like at [email protected]. Include ELEMENTAL IS
to invite you, our audience, to your name, contact information, YOUR MARK OF
take a more participatory role company and a brief descrip- ASSURANCE THAT
in the magazine by becoming tion of the topic. HARDWOOD
a guest columnist. In this way PANELS
you get other readers thinking We will reply quickly and FROM STATES
and prompt a dialogue among discuss a convenient way to INDUSTRIES
us all. Discussion among design proceed. Remember, Design CONTAIN NO
professionals, woodworkers, Solutions is published quar- ADDED UREA-
specifiers and construction terly so you will have a leisurely FORMALDEHYDE
teams, we believe, can only deadline. RESINS.
prove beneficial and perhaps
lead to solutions to industry It is our desire to keep our

All Soy.
concerns. readers interested as well as
informed. What you know and
We know you are busy so we’re what you think can help us do
here to provide any assistance
to make it easy to contribute.
that. Consider contributing an
article, it’s a great way to share
No Formaldehyde.
It’s your ideas and expertise your expertise.
we’d like to share, so if help States Industries is 100% committed
with writing is needed just let to total conversion to formaldehyde-
us know.
free resins. Superior operational and
environmental performance is our
steadfast goal.

Visit StatesInd.com • 1.800.626.1981

States Industries LLC • Eugene, OR

54 I
designsolutions spring 2013
 Designing in wood produces beautiful,
elegant and often exotic results. Results you
show off.
want to share with the rest of the world. Put
your designs in the limelight...by publishing
them in DESIGN SOLUTIONS.
This award-winning publication features
custom architectural woodwork in a variety
of applications. Distributed to your peers
throughout North America, DESIGN SOLUTIONS
provides ideas and techniques to readers
who appreciate the grandeur of architectural
woodwork
To submit a project for publication:
1. Complete our convenient
submission forms.
2. Submit forms with color photography.

We’ll do the rest. However, the woodwork

must be produced by a member firm of the
Architectural Woodwork Institute. Projects of
any size will be considered.
Submissions can be made at any time.
Forms are available online at awinet.org
or by request through AWI headquarters:

Telephone: 571-323-3636
Fax: 571-323-3630

spring 2013 I designsolutions 55

AWI Manufacturing Members
Firms marked with a green star (H) are
accredited participants in the AWI Quality
Certification Program as of the print date.
For an up-to-date status, go to awiqcp.org.

Arkansas Arizona California

Jonnie Holbrook Cabinetry & Const., Inc., Fairbanks H Architectural Millwork Design Inc., Phoenix American Building Supply, Inc., Sacramento
Jonnie Holbrook, (907) 456 4842 Rod Laughlin, (623) 492 9130 Randy Neto, (916) 503 4100
Jons Woodworking LLC, Palmer H Arizona Custom Millwork & Contracting, Phoenix Artistry Custom Cabinets, Inc., El Cajon
Andrew Hendrickson, (907) 746 0635 Tamara Westfall, 602-254-6431, ext. 1 Brian McCullough, (619) 258 1040
Arizona Western Fixture & Display, Phoenix H Caseworx Inc., Redlands
Alabama Bernard Narcy, (602) 272 2170 Bruce Humphrey, 909-799-8550, ext. 33
Amish Millwork, Mobile Associated Construction Enterprises Inc., Phoenix Commercial Millwork Corp, Lake Elsinore
Robert Lee, (251) 471 3792 Travis Brewer, (602) 272 7055 Kenneth Len, (951) 471 4967
Cahalan Industries, Moody H Associated Woodworks, LLC, Phoenix Meridian Moulding, Inc., Corona
Leo Cahalan, (205) 640 2779 Gail Rochwalik, (602) 397 4551 George Noor, (951) 279 5220, ext. 101
Castle Custom Cabinets, LLC, Hanceville BASC, LLC, Phoenix Montbleau & Associates, Inc., San Diego
Terry Hurst, (256) 775 2922 Ron Beveridge, (480) 759 2959 Barton Ward, (619) 263 5550, ext. 5808
H Deas Construction and Millwork, Semmes Bizarre Wood Products, Glendale Northwestern Inc., Van Nuys
Zach Deas, (251) 478 1060 Pat Brown, (602) 377 4830 Wayne Noecker, (818) 786 1581, ext. 115
Dyer Industries, Inc., Empire H Blue Sierra, Inc., Tucson Pars Industries, dba Woodcraft Co., San Diego
Roger Dyer, (205) 648 1039 William Oetting, (520) 624 3202 Mansour Rahmati, (619) 671 9663, ext. 15
Fabrication Specialists, Inc, Mobile Crown Custom Millwork, LLC, Phoenix The Wood & Iron Factory, Inc, San Diego
David Smith, (251) 660 1080 Gary McDaniel, (623) 879 8500 Norberto Gutierrez, (619) 710 1660
House of Cabinetry Inc, Dothan Desert Millwork, Inc., Phoenix
Don Swanson, (334) 793 9502 Randy Heller, (602) 258 7517 Colorado
H Laco Woodworks Inc., Saginaw Distinctive Woodworks, Flagstaff H Ark Woodworks, Inc., Brighton
Bob Cole, (205) 664 2986 Brad Clark, (928) 774 7295 Nasser Haji-Sarvestani, (303) 655 0051
H Lamtech Inc., Florence H European Techniques, Prescott BKFine , Brighton
Andy Givens, (256) 766 4112 Marie Corkery, (928) 776 9957 Bruce King, (720) 382-2410, ext. 101
H Leonard Peterson & Company, Inc., Auburn Exhibits Southwest, Tempe H Cab-Con Enterprises, Inc., Security
Randy Jensen, (334) 821 6832 Jim Chitla, (480) 763 3333 Mike Perdue, (719) 382 5649
H Luttrell Architectural Woodworks, Inc., Birmingham Furniture Concepts Ltd, Phoenix Colorado Arch. Millwork Supply, Colorado Springs
Robert Luttrell, (205) 324 3421, ext. 108 Mike Peters, (602) 256 7023, ext. 3 Darryl Bryant, (719) 477 9939, ext. 12
H Phipps Cabinets, Inc., Dothan High End Commercial Cabinets, Prescott H Concepts in Millwork, Inc., Colorado Springs
Matt Phipps, (334) 983 4512 Toby Tyler, (928) 445 5301 Scott Robinson, (719) 570 7353, ext. 108
Pike Road Millwork, Montgomery H Meyer and Lundahl Manufacturing Co., Phoenix Dawning Heritage Inc., Sheridan
Wesley Black, (334) 215 4495 Matt Lundahl, 602-254-9286, ext. 7913 Skip Wilkins, (303) 761 3701
H Remmert & Company, Tuscaloosa H Paul Wesley Construction, ACC, Mesa Delta Cabinet Company, Inc., Delta
Luke Remmert, (205) 345 4800 Paul Waterford, (480) 985 1901 Gary Kensler, (970) 874 8793
H Southern Woodsmith, Pelham R.C. Taylor Inc., Phoenix E & J Cabinets, Arvada
Allen Ponder, (205) 663 5299 Jon Taylor, (602) 274 0214 John Peterson, (303) 425 7527

H S&R Cabinetry & Builders LLC, Tucson H Freelance Enterprises, Denver

Arkansas Francisco Zapien, (520) 807 7604 Ted Rosiere, (303) 438 1612
H Custom Millwork, Div. of CDI Contractors, Maumelle H Gold Plane Custom Cabinets, Northglenn
Styles Brothers Custom Millwork, Inc., Glendale
Donnie Green, (501) 851 4421 John Geonetta, (303) 451 5318, ext. 16
Shawn Styles, (623) 931 3990
Estes Wood Designs Inc, Bentonville Happel & Associates, Inc., Golden
Sun Valley Millwork, Inc., Phoenix
Brandon Estes, (479) 273 2974 Steven Silk, (303) 277 9358
Carmen Rago, (602) 352 6636
H Kitchen Distributors Inc., Fayetteville Heartwood Custom Woodworks, Eagle
Turnkey Corp., Tucson
Jon David Warren, (479) 521 1313 Carl Jordan, (970) 328 9663, ext. 107
John Henderson, (520) 571 8819, ext. 224
H Nabholz Custom Millwork, Conway High Country Millwork, LLC, Longmont
H Western Millwork, Inc., Phoenix
Russ Thessing, (501) 329 0164 Michael Childs, (303) 532 2222
Bill Roach, (602) 233 1921
J & M Custom Cabinet Shop, Inc., Denver
Julio Estrada, (303) 853 9767

56 I
designsolutions spring 2013
H JK Concepts, Inc., Denver Petra Construction Corporation, North Haven Commercial Wood Designs, Inc., Sanford
Margery Johnson, (303) 571 0672 Guido L. Petra, (203) 865 6043 J. Fernandez, (407) 302 9063
H John Murphy Millworks, LLC, Erie The Woodmill, LLC, Terryville Corry Cabinet Company, Inc., Havana
Rose Murphy, (303) 828 4335 Hiram Morales II, (860) 584 5109 Henry Corry, (877) 539 6455
L.A. Woodworks, Inc., Windsor H Zavarella Woodworking, Newington H Creative Concepts Of Orlando Inc., Longwood
Leo Arellano, (970) 482 4200, ext. 105 Bruno Zavarella, (860) 666 6969 Wayne Bishop, 407-260-1435, ext. 11
Merritt Colorado, LLC, Castle Rock D. T. Woodcrafters Corp, Hialeah
Eric Peterson, (303) 791 9003 District of Columbia David Thibaudeau, (305) 638 4622, EXT. 21
Modern Fixture Company, Inc., Denver H Columbia Woodworking Inc., Washington DBR Inc., Orlando
Joseph Seegmiller, (303) 289 2921 Brad Long, (202) 526 2387 Richard McCree, Jr., (407) 898 4821
H Osburn Cabinets & Design, Grand Junction H D7 Partners Inc., Washington H Designer’s Specialty Millwork, Ft. Lauderdale
Jesse Osburn, (970) 242 6899 Enrique Angulo, (202) 529 0700 GG Harrison, (954) 776 4500
Precision Interiors, Englewood H Dew - Well Industries , Inc., Dade City
Anthony Slavec, (303) 761 7673 Delaware Sandy Grimes, (352) 567 3153
Quality Custom Woodwork, Inc, Pueblo 3D Fabrication, Inc., Newark
H Distinct Designs Custom & Comm. Casework, Largo
Cheri Bucciarelli, (719) 546 0324 Greg Brant, (302) 292 3501 Bill Kratimenos, (727) 530 0119
H Rails Plus Inc., Englewood Artisans & Company, New Castle
H Distinctive Kit. & Bath, DBA Dist. Millwork, Boca Raton
Ishmael Moreno, (303) 777-7914 Ext.17 Gary Munch, (855) 206 4904 Jazer Alonso, (561) 864 0142
Right Choice LLC, Denver Custom Cabinet Shop, Inc., Greenwood
Excel Millwork & Moulding Inc., Midway
Christopher Guidera, (303) 403 0400 Gerald Campbell, (302) 337 8241 Jerry Ruis, (850) 576 7228, ext. 105
Trustile Doors LLC, Denver Delaware Millwork Ltd, Middletown
Federal Millwork Corporation, Fort Lauderdale
Chuck Tamblyn, (303) 286 3931 Thomas Wilson, (302) 376 8324 Richard Ungerbuehler, (954) 522 0653
H Unique Woodworking, Inc., Denver H Group Three Inc., Wilmington
H Fisher Cabinet Company LLC, Pensacola
Phil Lantzy, (303) 573 3966, ext. 17 Jeffrey Moore, (302) 658 4158 Scott Fisher, (850) 944 4171
H Wood Designs, Ltd., Greeley
Ian Dvorak, (970) 356 0339 Florida Five Star Millwork, Deerfield Beach
William Santana, (954) 956 7665
1st Choice Interiors, Bradenton
Woodcraft Unlimited, Inc., Denver Dave Henshaw, (877) 376 8856 H Harwil Fixtures, Inc., Hastins
Tom Goulet, (303) 778 9103 Louis Cici, (904) 692 1051
H Adams Group, North Port
Ethan Adams, (941) 639 7188 H Hollywood Woodwork, Inc., Hollywood
Connecticut Sebastien DesMarais, (954) 920 5009
H A. Secondino & Son, Inc., Branford Advanced Millwork, Inc., Orlando
Edmond Zaho, (407) 294 1927 Leeds Custom Design, Palm Beach Gardens
Alfred Secondino, (203) 481 3496 George L. Ford, III, (561) 659 3134
AGA Millwork LLC, Bristol AIC Millworks LLC, Tampa
Charles Combs II, (813) 413 7401, ext. 3 Legacy Millwork Inc., West Palm Beach
krzysztof kolodziejczyk, (860) 506 4584 Marco Bav uso, (561) 729 3276
American Wood Products Inc., North Haven H Akira Wood, Inc., Gainesville
Hoch Shitama, (352) 375 0691 H Lyndan, Inc., Tampa
William Geremia, (203) 248 4433 Dana Guy, (813) 977 6683
Amerifix, West Haven H Andy’s Cabinets and Millwork Inc., Tallahassee
Andy Mohney, (850) 562 3536 H Marquis Industries Inc., Santa Rosa Beach
Richard Moore, (203) 931 7290 Nick Zargari, (850) 267 2290
Atlantic Millwork, North Haven H Atlantic Custom Woodcraft Corp., Tarpon Springs
Trevor Haughey, (727) 942-2129, ext. 11 H Mill-Rite Woodworking Co., Inc, Pinellas Park
Mark Bolling, (203) 248 1969 Jennifer Clark, (727) 527 7808
H Bergan Architectural Woodworking, Middletown AWM GROUP, LLC, Fort Lauderdale
Juan Geymonat, (800) 998 6408 MJR Woodworks LLC, Apopka
Richard Bergan, (860) 346 0869 Jason Ryan, (407) 403 5430
H Conco Wood Working Inc., West Haven H AWS Carpenter Contractors, Inc., Oldsmar
Ken Schroeder, (813) 855 1006 Palm Beach Trim, Lake Worth
Lou Cutaneo, (203) 934 9665 Rick Williams, (561) 588 8746
H Curtiss Woodworking, INC, Prospect H Baron Manufacturing, Pompano Beach
Hasu Gavan, (954) 590 3800 H Pioneer Woodworking, Pensacola
Dale Curtiss, (203) 527 9305, ext. 1 Paul Hughes, (850) 453 9570
CWC Architectural Woodworking, Inc., Bristol Bluewater Yachting Solutions Inc, Sarasota
David Spiegel, (941) 359 1410 Reesmar Sales and Millwork, Corp., Hialeah
Bruce Schultz, (860)585-6396, ext. 131 Jose Reimondez, (305) 885 3958
Desco Professional Builders Inc, Ellington Blumer & Stanton, Inc., West Palm Beach
Marcille Irwin, (561) 585 2525 Riverview Millworks, Inc., Jacksonville
Robert Anderson, (860) 870 7070 Charles Nichols, Jr., (904) 764 9571
H Fairfield County Millwork, Bethany Broward Custom Woodwork LLC, Archer
Bill Koelbel, (352) 376 4732 Royal Cabinetry & Millwork, Hialeah
John Ianiri, (203) 393 9751 Ed Garcell, (305) 696 8329
H Legere Group, Ltd., Avon Coastal Millworks, Inc., Riviera Beach
John Maffett, (561) 881 7755 H SMI Cabinetry, Inc., Orlando
Craig Froh, (860) 674 0392, ext. 317 Michelle Hull, (407) 841 0292
Modern Woodcrafts, LLC, Plainville H Commercial Millworks Inc., Orlando
Gayle King, (407) 648 2787 Spacewerks, Inc, Clearwater
Lisa Pelletier- Fekete, 860-677-7371, ext. 156 Ken Yaeger, (727) 540 9714

spring 2013 I designsolutions 57

 Firms marked with a green star (H) are
accredited participants in the AWI Quality
Signature Interior Woodwork, Summerville
Frank Jankovsky, (706) 857 7444
Idaho
Certification Program as of the print date. H Advanced Custom Cabinets, Hayden
For an up-to-date status, go to awiqcp.org. H South Georgia Cabinet Co Inc, Ray City Joe McCormick, (208) 772 2377
Thomas Clayton, (229) 455 5800
Specialty Wood Manufacturing, Kissimmee H Anderson Cabinet & Millwork, Rigby
David Wood, (407) 933 4444 Viacon Inc., Stockbridge Cody Bowler, (208) 538 7415, ext. 12
Russell Via, (770) 507 9913
Stamak International, Oviedo H Beck Cabinet Company, Coeur d’Alene
Jack Lavoie, (407) 359 0310 Welbornhenson, Inc., Atlanta Mike Beck, (208) 664 0892, ext. 313
John Henson, (404) 523 9277
H Star Quality, Inc., Tampa H Bledsoe Cabinets, Boise
Max Sanchez, (813) 875 9955 H Williamson Millworks, Inc., Savannah Steve Bledsoe, (208) 433 0033
Christopher Williamson, (912) 964 2290
H Superior Millwork Company, Jacksonville H Johnson Brothers Planing Mill Inc., Idaho Falls
Francis Polly, (904) 355 5675 Willingham Partners, LLC, Macon David Sargis, (208) 522 3674
Brian Smith, (478) 743 2642
T & T Custom Cabinets, Tampa H Pacific Cabinets, Inc., Ferdinand
Hung Nguyen, (813) 835 1219 H Woodtec Millwork Inc., Jefferson Steve Frei, (208) 962 5546
David Boring, (706) 367 0617
The Master Cabinet Maker Inc., Palmetto H Swainston Mill & Cabinets,Inc., Preston
Tom Schipper, (941) 723 0278 Alex Swainston, (208) 852 2730
Walker Brothers Millworks, Inc., Winter Garden
Hawaii
John Walker, (407) 656 2430 Bruce Matson Company, Inc., Honolulu
Brent Matson, (808) 380 9414
Illinois
H WJ Bergin Cabinetry, Orlando H Accurate Custom Cabinets, Inc., Addison
William Bergin, (407) 466 9373 Paul Steger, (630) 458 0460
Iowa
H Wood Company Inc., Clearwater H Ameriscan Designs, Inc., Chicago
Dave Henshaw, (727) 573 3611, ext. 106 A.F. Johnson Millwork Company, West Des Moines
Bill MacWilliams, 773-542-1291, ext. 17
Lyn Lyon, (515) 277 7222
Benchmark Cabinets & Millwork, Inc., Peoria
Georgia H Architectural Arts, Des Moines
Jim Broich, (515) 265 4441
Bryan Stoehr, (309) 697 5855
Artisan Millworks, LLC, Cumming H Bernhard Woodwork, Ltd., Northbrook
Arthur Murray, (678) 513 2320 H Calmar Manufacturing Co., Inc., Calmar
Mark Bernhard, (847) 291 1040
Frank Huschitt, (563) 562 3261
Augusta Cabinets & Casework, Evans H Cain Millwork, Inc., Rochelle
Phillip Boone, (706) 814 4540 H Custom Woodworks, Ltd., Sioux City
Don Lupa, (815) 561 9700
Mark Gingery, (712) 252 4357
Augusta Sash & Door Sales of GA Inc., Evans Creative Design Custom Cabinets, Inc, Crystal Lake
Bob Dehner, 706-738-1447, ext. 17 Dras Cases Inc., Lake Mills
Carol Nixon, (815) 356 7937
Dean Rasmusson, (641) 592-3333, ext. 124
H Bridges Wood Products, Inc., Savannah Custom Designed Cabinetry, South Beloit
Glenda Gunby, (912) 897 2694 Fletcher Wood Products, Fort Dodge
Jeffrey Losinske, (815) 389 4455
Clark Fletcher, (515) 573 2021
C3 Millwork, Cumming Der Holtzmacher, LTD, Sycamore
DC Scheib, (770) 856 1788 G.C. Woodworking Inc., Ames
Michael Holtz, (815) 895 4887
Greg Clouser, (515) 232 0423
H Cabinets by Design, Inc., Duluth George J. Rothan Co., Peoria
Fari Vakili, (770) 418 1200 H Huston Millwork, Grimes
Chris Rothan, (309) 674-5189 ext. 21
David Lewis, (515) 986 4874
H Com. Bank & Business Equipment, Woodstock GreatLakes Architectural Millworks, LLC, Chicago
Joe Schieber, (770) 924 1242 H JC Huffman Cabinetry, Fairfield
C. O’Donnell Winchester, (312) 829 7110
Teresa Huffman, (641) 472 8385
H Commercial Cabinetry of Georgia, Lawrenceville Herner-Geissler Woodworking, Chicago
Matthew Beaudry, (770) 466 1805, ext. 223 H McComas-Lacina Construction, Iowa City
Rebecca Dittmer, (312) 226 3400
Lin Holmes, (319) 338 1125
HCW Incorporated, Bainbridge Imperial Woodworking Company, Palatine
Mary Jane Hall, (229) 246 8193 H RCS Millwork, L.C., Ankeny
Frank Huschitt, Jr., (847) 358 6920
Dan Keller, (515) 289 3787
H Kinnane Woodworking Inc., Atlanta Inter Ocean Cabinet Company, Elmhurst
Paul Kinnane, (404) 758 5951 Robertson Manufacturing, Inc., Davenport
Ken Kamien, (630) 930 5770
Guy Robertson, (563) 322 7500
M. Gardner, dba Arch. Interior Millwork, Oxford KBI Custom Case, Inc., Hebron
Mark Gardner, (678) 658 1304 Swan Creek Cabinet Co. , Boone
Janice LeTourneau, (815) 648 4940
Michael Paul, (515) 432 8126
H Malone Design / Fabrication, Decatur Kohout Woodwork, Inc., Addison
Gary Jones, (770) 593 7279 H The Ar-Jay Center, Cedar Rapids
Steve Kohout, (630) 628 6257
Matt Cable, (319) 393 5885
H Mortensen Woodwork Inc., Union City Kunden Architectural Inc., South Elgin
Greg Kasten, (770) 969 1475 H The Horizon Group, Inc., Davenport
William Wampach, (847) 742 1900
Don Gleason, (563) 391 1891
Oldcastle Surfaces, Atlanta Legacy Woodwork, Inc, Franklin Park
Brian Gahagan, (800) 355 3108 Woodcrafters, Inc., Marion
Dan Gonzalez, (847) 451 7602, ext. 101
Scott Grekoff, (319) 373 6279, ext. 15
H Raydeo Enterprises, Inc, Ball Ground H Living Laminates, Elgin
Preston Byers, 770-720-1100, ext. 225 Anthony Medina, (847) 741 2004
H Royal Custom Cabinets, Norcross Marshall Furniture Inc, Antioch
Amir Nejad, (770) 263 8088 John Ryter, (847) 395 9350

58 I
designsolutions spring 2013
H Meilahn Manufacturing Co., Chicago Fremont Interiors Inc., Carmel Highland Millshop Inc., Topeka
Gary Clarin, (773) 581 5204 Kent Gilchrist, (317) 843 0237 Danny Sales, (785) 232 9328
H Onsite Woodwork Corporation, Loves Park General Fabricators, Inc., Indianapolis H Kitchens Inc., Dodge City
Ralph Peterson, (815) 633 6400 Mark Blackard, (317) 787 9354 Scott Gurtner, (620) 227 6142, ext. 213
H Parenti & Raffaelli Ltd., Mt. Prospect Hiram Woodworking, Logansport H S.B.K. Supply & Millwork Co., Wichita
Robert Parenti, (847) 253 5550 Chuck Ross, (574) 737 7714 Bob Schwarzenberger, (316) 942 0911
H Phoenix Woodworking Corporation, Woodstock H Indianapolis Woodworking International, Fishers H Salina Planing Mill, Inc., Salina
Sandra Pierce, (815) 338 9338 Gary Riegle, (317) 841 7800 Steve Dunning, (785) 825 0588
Pierce Laminated Products Inc., Rockford Interior Fixtures & Millwork Inc, Knightsville H Technique Manufacturing Inc., Hutchinson
Eric Lindroth, (815) 968 9651 Ray Jones, (812) 446 0933 Ted Robinson, (620) 663 6360
R. Maderite Inc., North Chicago Interior Woodworking Corp., Anderson H Timberline Cabinetry and Millwork, Manhattan
Jim Engelthaler, (847) 785 0875 Dave Reidhead, (765) 378 0995 Tim White, (785) 323 0206
H Redbud Ridge Custom Shop, Inc., Bartonville Koetter Woodworking, Borden H Wend-Wood, Inc., Wichita
Patrick Ruder, (309) 633 1173 Jerry Koetter, (812) 923 4500 Daryl Markel, (316) 264 1997, ext. 201
Roecker Cabinets and Millwork, Morton Kramer Furniture and Cabinet Makers, Edinburgh WoodSong Cabinet & Trim LLC, Park City
Mike Matthews, (309) 222 8300, ext. 2 Thomas Kramer, (812) 526 2711 Randy Pierce, (316) 650 9619
Stay-Straight Manufacturing, Chicago LUE Manufacturing Corp., Wakarusa Woodwork Manufacturing & Supply, Hutchinson
Jeannine Potter, (312) 226 2137 Steve Gongwer, (574) 862 4249 Rick Mitchell, (620) 663 3393
H Stevens Industries, Teutopolis H MARC Woodworking Company, Indianapolis
Cary Moudy, (217) 540 3100 Joseph Hirsch, (317) 635 9663 Kentucky
Systems Unlimited Inc., Itasca Meyer Custom Woodworking, Inc., Dubois H America’s Finest Woodworking Team Inc, Lexington
Pete Zaluzec, (630) 285 0010 Steven Meyer, (812) 695 2021 Roger Williams, (859) 254 8999

H Unique Design Architectural Woodwork, Normal Midwest Cabinet Solutions, Inc., Marion H Bargains Unlimited ,DBA Adams Cabinetry, Louisville
Mark Fagerland, (309) 454 1226 Martin Bligh, (765) 664 3938 Clem Adams, (502) 589 9500

Vermillion Millworks, LLC dba T.h. Snyder Co., Danville Milestone Cabinetry & Millwork, Merrillville H Caseworks, Div. McCammish Mfg., Louisville
Brad Irle, (217) 446 8443 Timothy Wilson, (219) 947 0600 Andy Keith, (859) 744 8234

H WKI, Harrisburg Myers Cabinets, Inc., Whitestown H Classic Cabinets & Millwork, Louisville
Blake Wilson, (618) 253 7449 Roy Myers, (317) 769 5323 Debbie Goldberg, (502) 583 3960

H Wm. Huber Cabinet Works, Chicago H P. R. Bean Co. LLC, Washington H Four Stone Mill and Casework, Louisville
Daniel Huber, (773) 235 7660 Jeremy Bean, (812) 254 3761 Wes Shrock, (502) 451 1528

Precision Millwork & Plastics, Inc., South Bend H Harleywood Productions, LLC, Corbin
Indiana Larry Shoemaker, (574) 243 8720 Ray White, (606) 528 1903
H Advanced Cabinet Systems, Marion Precision Wood Products, Mishawaka Heirloom Lumber Company, Inc., Lexington
Philip Bowers, (765) 677 8000 Gary Matt, (574) 255 7141 Greg Martelli, (853) 744 5933
Antreasian Design, Inc., Indianapolis H Sims Cabinet Company, Inc., Indianapolis H Leininger Cabinet & Woodworking, Inc., Lexington
Mark Antreasian, (317) 546-3234, ext. 303 James Sims, (317) 634 1747 John Leininger, (859) 252 0429
Big C Lumber Company, Fort Wayne H Southeastern Supply Co., Inc., Indianapolis Lexington Laminates Plus Inc, Lexington
Chris Stier, (260) 422 5584 Ed Lough, (317) 359 9551 Robert Wheeler, (859) 233 7655
H Cabinets Plus By Patrick Geer, Anderson Louisville Lumber & Millwork, Louisville
Patrick Geer, (765) 642 0329 Kansas Ed Brewer, (502) 459 8710
Chisholm Architectural Millwork, Indianapolis Allen Millwork Company, Wichita Ludlow Custom Cabinetry (aff. of EGC Const., Newport
Douglas Chisholm, (317) 547 3535 Jerry Allen, (316) 943 5151 Todd Meineke, (859) 442 6500
Counter Design Co., Inc., Evansville Becker Cabinet & Furniture, LLC, Hesston H Smith’s Laminating Shop, Mount Washington
Tony Blankenship, (812) 477 1243 Bradley Koehn, (620) 327 4448 Dwayne Endicott, (502) 957 5151
Custom Woodworking Solutions, Inc., Richmond H Blake Clotia, Wichita H Stidham Cabinet, Inc., Corbin
Mark Moran, (765) 935 4066 Naaman Ritchie, (316) 263 9722 James Stidham, (606) 528 3648
D&L Wood Products, Inc., Crown Point H Cabinetry & Millwork Concepts, Inc., Topeka H Top Service of Lexington, LLC, Nicholasville
Robert Ligda, (219) 662 9177 Jim Ziegler, (785) 232 1234 Paul Jenkins, (859) 881 3344
H Euronique Inc., Elberfeld CCM Countertop & Cabinet Mfg. Co., Wichita H US Millwork Inc, Louisville
Scott Hasenour, (812) 983 3337 Brent Traylor, (316) 554 0113 Richard Selvage, (502) 587 9450
Finish Design Woodworking, Jeffersonville H Griffith Lumber Company, Inc., St. Marys
Harold Snook, (812) 284 9240 Matthew Palmeri, (785) 437 6508 Louisiana
H Fredericks, Inc., Pendleton Hardwood Millwork and Supply, LLC, Burrton Architectural Turnings, Greenwell Springs
William Fredericks, (765) 778 7588 Ted Jones, (620) 463 2001 Kim Vedros, (225) 892 7835

spring 2013 I designsolutions 59

 Firms marked with a green star (H) are J.C. Clocks Company, North Dartmouth Chesapeake Mill Products, Dunkirk
accredited participants in the AWI Quality Aguinaldo Correia, (508) 998 8442, ext. 11 Jim Hardy, 301-855-6700, ext. 11
Certification Program as of the print date.
For an up-to-date status, go to awiqcp.org. J.H. Klein Wassink & Co., Inc., Concord H Chesapeake Woodworking, Baltimore
John Wassink, (617) 283 2416 David Schreiber, (410) 276 1060
H Bayou Wood Products, Inc., West Monroe
Steven Tippen, (318) 397 0000 Kochman Reidt and Haigh Inc., Stoughton H Custom Commercial Interiors, Baltimore
James Kochman, (781) 341 4313 Darrell Howard, (410) 462 6919
H Brian A. Hebert Woodworks, Inc., Lafayette
Donna Matte, (337) 984 2461 H Landmark Finish, Inc., Andover Cynkar/Santini Inc., Mount Airy
Stewart Junge, (978) 470 2040 John Cynkar, (301) 829 0515
H C & C Millworks, Inc., Baton Rouge
Patrick Spano, (225) 273 1258 H Mark Richey Woodworking, Newburyport D & S Cabinet & Sinktop, Inc., Beltsville
Mark Richey, (978) 499 3800 Donald Werre, (301) 937 4244
Cabinets by Perrier, Harahan
David Perrier, (504) 733 3139 H Mass Cabinets, Inc., Methuen H Edgewise Cabinetry, Westminster
Mike Sarno, (978) 738 0600 Steven Larsen, (410) 386 1646
Central City Millworks LLC, New Orleans
Hal Collums, (504) 899 1351 Micieli Contracting, Inc., Lynn G.D. Laminates, Baltimore
Salvatore Micieli, (781) 581 6282 Gregory Dively, (410) 558 2305
Colonial Millworks of Baton Rouge, Denham Springs
Franco Franchi, (225) 243 4900 New England Caseworks, Inc., Woburn H G.T. Brothers, Inc., Westminster
Matthew Teal, (781) 932-9980, ext. 8816 Jeff Sheidy, (443) 605 1345
Custom Cabinet Specialties LLC, New Orleans
Dale Smith, (504) 733 0220 Old Colony Cabinets Inc., Stoughton Helmut Guenschel, Inc., Baltimore
Julie Edwards, (781) 341 2244 Helmut Guenschel, (410) 686 5900
Custom House Millworks, New Orleans
Rene Alcebo, (504) 483 3773 Padco Inc., Worcester H Ilex Woodworking, Baltimore
Joseph Padavano, (508) 753 8486 Michael Alt, (410) 837 8167, ext. 1007
Douglas Cabinet Co., Inc, Ruston
Danny Hancock, (318) 768 2675 Ponders Hollow Cust. Moulding & Flooring, Westfield J. H. Franz, Inc., Glen Arm
Gerald Lashway, (413) 562 8730 John H. Franz, Jr., (410) 592 6185
H Gretna Cabinet Company, Inc., Marrero
Kerry Martin, (504) 348 8232 Shaw Woodworking Inc., Cotuit H M.S. Moeller Cabinetry & Millwork, Westminister
James Shaw, (508) 563 1242 Mark Moeller, (410) 875 6455
H Gulf Coast Woodwork LLC, Lafayette
Deke Broussard, (337) 232 4987 H South Shore Millwork, Inc., Norton H Maryland Millwork Inc., Hagerstown
Jeffrey Burton, (508) 226 5500 Mark Myers, 301-733-4600, ext.109
H Hanley Gremillion Millwork & Supply, Alexandria
Paula DePriest, (318) 443 1202 Stone & Stone Woodworking Inc., Indian Orchard MCC Millwork & Cabinet Corp., Gaithersburg
Terrence Stone, (413) 543 8418 Patrick Bloomfield, (301) 921 9177
H JJ Concepts, dba Superior Millworks, Baton Rouge
Bret Mounce, (225) 928 9436 Thayer Street Associates, Inc., South Deerfield H New Era Cust. Design & Cabinet Works, Frederick
Vern Harrington, (413) 665 4018 Johnny Gage, (301) 695 4310
Martin Woodworks, Metairie
Henry Martin, (504) 834 3391 Valiant Industries, Inc., Amesbury Potomac Digitek - TESTING USE ONLY, Gaithersburg
Charles Little, 978-388-3792. ext. 11 Alan Stone, (301) 590 2770
Northshore Millwork, LLC, Mandeville
Guy Mullen, (985) 867 1832 VCA Inc., Northampton H Specified Woodworking Corp., Laurel
Bruce Volz, (413) 587 2750 Duane Gross, 301-598-8200, ext. 11
H Orleans Custom Millwork, LLC, Mandeville
Kathy Hartson, (985) 246 1300 Windsor Architectural Woodworking, Malden H The Washington Woodworking Co., LLC, Landover
Michael Moscaritolo, (781) 324-9600, ext. 8902 David Smith, (301) 341 2500
Specialty Furniture & Design, DeRidder
Errol Unruh, (337) 463 6918 Wing Cabinet Company, Pocasset Thompson Industries, Baltimore
Eric Wing, (508) 564 9902 Ken Thompson, (410) 285 5215
H Superior Woodwork And Trim LLC, DeRidder
Alex Quebedeaux, (337) 226 9787 H Wright Architectural Millwork, Northampton TLA Architectural Millwork LLC, Baltimore
Walter Price, (413) 586-3528, ext. 112 Michael Alt Jr, (443) 610 0999
H Woodward Millwork Group, Goodbee
Jason Delancy, (985) 871 7723 Young’s Woodworking Inc., Amesbury H Wood Creations Inc., Owings
Chris Young, (978) 834 9028 John Downing, (301) 855 7986
Massachusetts Wooden Design Inc., Gaithersburg
Alpha Builders, DBA Sterling Cust. Cabinets, Springfield Maryland Russell Bodine, (301) 670 0161
Fotios Gazis, (413) 732 2131 H Baker & Kerr, Inc., Upper Marlboro H Worcester Eisenbrandt, Inc., Baltimore
Dave Baker, 301-390-1090, ext. 12 Kirk Sylvester, (410) 644 6580
Amherst Woodworking & Supply, Northampton
David Short, (413) 582 1852 Belkov Yacht Company, Annapolis
Architectural Casework & Millwork Inc, Gloucester
Larry Belkov, (410) 269 1777 Maine
Jeffrey Martyn, (978) 525 2121, ext. 12 Blair Construction L.L.C., Millersville Cyrus Chilton Cabinetmakers, LLC, Cape Porpoise
James Blair, (410) 729 0777 Cyrus Chilton, (207) 282 0558
Bill Bancroft Furniture Design, LTD, Brighton
Bill Bancroft, (617) 797 4004 H Brunswick Woodworking, Ijamsville Pond Cove Millwork, Inc., South Portland
Steve Harris, (301) 874 4905 George Gagnon, (207) 773 6819
Blue Hive Inc., Worcester
Glenn Martin, (508) 581 9560 H Cavetown Planing Mill Co., Inc., Smithsburg H Trico Millwork Inc., Limington
Peggy Bushey, 301-733-7940, ext. 211 David Baker, (207) 637-2711 x-21
Haydenville Woodworking & Design, Inc., Amherst
Lance Hodes, (413) 253 3229 Cherryworks Ltd., Kingsville Veneer Services Unlimited, Kennebunk
John Cherry, (410) 592 5977 John Costin, (207) 985 7221

60 I
designsolutions spring 2013
H Windham Millwork, Windham
Bruce Pulkkinen, (207) 892 3238
Minnesota Classic Woodworking, Inc., St. Louis
Laurie Fromm, (314) 544 0121
H Aaron Carlson Corporation, Minneapolis
Wright Ryan Millwork, Portland Jason Horner, 612-789-8885, ext. 435 H Cohen Architectural Woodworking, St. James
Lee Proscia, (207) 775 6965 Noah Cohen, (573) 265 7070
Artifex Millwork Inc., Wyoming
YFI Millwork, Cape Neddick Brian Miller, (651) 462 5137 H Creative Associates Inc., Springfield
Glenn Farrell, (207) 363 8053 Shelby Blecher, 417-862-1794, ext. 105
Commercial Fixtures Inc., Roseville
Jeff Stcynske, (651) 628 9199 D. H. Schmidt Co., Inc., St. Peters
Michigan Rick Schmidt, 636-441-1555, ext. 24
CTB Inc, Wyoming
H 3rd Coast, Div. of Tadd Industries, Marne H Fixture Concepts Inc., Saint Peters
Kevin Stachowski, (651) 462 3550
Daniel Despres, (616) 677 5263 Nick Burch, (636) 441 2210
Damschen Wood, Inc., Hopkins
Advantage Millwork, Div. of D & D Building, Wyoming H Gravois Planing Mill, Inc., St. Louis
Daniel Damschen, (952) 933 3600
Jim Keuning, (616) 248 7908 Bob Paradoski, (314) 776 2800
Distinctive Cabinet Design, Foley
Allen Bradley Interiors Inc., Rhodes KS Wood Products, Inc., Springfield
Joe Fradette, (320) 968 4351
Brian Allen, (989) 689 4133 Lee Grant, (417) 833 1056
Focal Point Fixtures Inc., St. Cloud
BJC Services Inc, Clinton Twp H Lancia Brothers Woodworking & Fixture Mfg., St. Louis
Scott DeMarais, (320) 203 1100
Brandon Jennings, (586) 783 4559 Bob Naumann, (314) 721 0413
Goebel Fixture Company, Hutchinson
H Case Systems, Midland Merric Inc., Bridgeton
Matthew Field, (952) 933 9981
Bill Carpenter, (989) 496 9510 Daniel Claypool, (314) 770 9944
Gray Wolf Manufacturing, Inc., Faribault
Creative Merchandising Systems, Grand Rapids Specialty Cabinets Inc., Belton
Jim Gillen, (507) 334 3400
John Verhey, (616) 698 6200 Bob Clark, (816) 322 2211
Janish Wood Products, Inc., Ham Lake
Daiek Woodworks, Sterling Heights Square One Studio, Kansas City
Kenneth Janish, (763) 434 9090
John Daiek, (586) 268 1144 Chad Grossenkemper, (816) 753 0351
Kingsbury Builders Supply, Inc., Pine Island
H Eyewood Design Inc, Interlochen St. Louis WoodWorks, St. Louis
John Kingsbury, (507) 356 2200
Daniel Hansen, (231) 275 5457 Gary Leek, (314) 652 9663
H LSI Corporation of America, Minneapolis
H G.I. Millwork Inc., Plymouth H WoodByrne Cabinetry, Inc., St. Louis
Judy Stephenson, (763) 559 4664
John Malcom, (734) 451 1100 Timothy Byrne, (314) 621 4545
Madsen Fixture & Millwork, Inc, Forest Lake
Grand Valley Wood Products, Wyoming
Jeffrey Trippe, (651) 982 6220
Terry Idema, (616) 475 5890 Mississippi
Minncor Industries, St. Paul
Haworth, Inc., Big Rapids H Associated Architectural Products Inc., Columbus
Jessica Berg, (651) 361 7500
Jeremy Jackson, (231) 527 6680 Richard Ferguson, (662) 245 0400
Northern Woodwork, Inc., Thief River Falls
Iannuzzi Millwork Inc., Fraser H Commercial Millwork Specialist, Inc., Gulfport
Lincoln Olson, (218) 681 2305
Dominic Iannuzzi, (586) 285 1000 Trey Pennell, (228) 868 3888
Precision Woodworks & Design, Inc, Chisago City
Kropp Woodworking Inc., Mount Clemens Custom Woodcrafts, LLC, Horn Lake
Joseph Swanson, (651) 257 6509
Paul Kropp, (586) 463 2300 Tony Musarra, (662) 393 2443
R.C. Smith Company, Burnsville
MOD Interiors Inc., Ira Township H Easley & Easley Millwork Inc., Jackson
Peter Smith, (952) 854 0711
Matthew Gaglio, (586) 725 8227 Bill Easley, (601) 372 8881
H Shaw/Stewart Millwork, Minneapolis
Modern Millwork, Inc., Wixom H McNeil Cabinet & Millwork, Bay Springs
Marilyn McCann, (651) 488 2525
Jeff Weinger, (248) 347 4777 Philip McNeil, (601) 764 2100
H Siewert Cabinet & Fixture Mfg. Inc., Minneapolis
Palmer Promotional Products, St. Clair Shores MMI of Mississippi, Hazlehurst
Rick Siewert, (612) 721 4456
James Palmer, (586) 772 4225 Alan Oswalt, (601) 892 1105, ext. 12
H Southern Minnesota Woodcraft, Inc., Faribault
H Strata Design, Traverse City H Scanlon-Taylor Millwork Co., Jackson
Brad Cohen, (507) 334 4985
Tyler Cerny, (231) 929 2140 Frances Fraley, (601) 362 5333
H St. Germain’s Cabinet Inc., Duluth
H Superior Wood Products Inc., Grand Rapids Sheldon Laboratory Systems, Inc., Crystal Springs
Steve Fairbanks, (218) 624 1234, ext. 105
Ken Stevens, (616) 453 4100 Eddie Adkins, (601) 892 2731
H Wilkie Sanderson, Sauk Rapids
Thomas & Milliken Millwork, Northport H South Coast Architectural Woodworking, Moss Point
Marc Sanderson, 320-252-3165, ext. 122
Andy Thomas, (231) 386 7236 Pat Lambert, (228) 475 0912
H Trend Millwork LLC., Lincoln Park
Brian Zuccaro, (313) 383 6300
Missouri H Southeastern Architectural Woodworks, Brandon
Joel Price, (601) 825 9791
A to Z Laminating Specialists Inc, Wentzville
Vivid Millwork & Carpentry, Inc., Troy Mike Zender, (636) 332 9961 Wells Cabinet Works, Philadelphia
Fareed Yousif, (248) 629 9009 Glenn Wells, (601) 656 3631
H Architectural Woodwork Corp., St. Louis
Woodways Industries, Grand Rapids Jim Ryan, (314) 962 2070 WoodWorkers Construction, Inc., Picayune
Suzanne Rudnitzki, (616) 772 3292 Roland Fangue, (601) 889 0322
H C.S. Humphrey & Company LLC, Kansas City
Sara Humphrey, (816) 444 8100
H Cabinet Masters, Inc., Ironton
Matt Dunn, (573) 546 9999

spring 2013 I designsolutions 61

 Firms marked with a green star (H) are
accredited participants in the AWI Quality
Lentz Cabinets and Associates LLC, Arden
Jason Higgins, (828) 687 7688
North Dakota
Certification Program as of the print date. H Cal-Dak Cabinets, Minot
For an up-to-date status, go to awiqcp.org. H Madison Construction Group, Pineville Darwin Maasjo, (701) 838 2901
Chris Mezzanotte, (704) 588 4992
Montana MDN Cabinets Inc, Raleigh
H Minot Sash and Door Company, Minot
Michael Feist, (701) 852 2181
H Le Cabinet Shoppe Inc., Laurel Michael Pritchett, (919) 662 1090, ext. 225
Gordon Smith, (406) 628 8222 H TMI Systems Design Corp., Dickinson
H Northside Cabinets Inc., Hillsborough Dean Rummel, (701) 456 6716
Moderne Cabinet, Great Falls Peter Singer, (919) 732 6100
Layne Shanahan, (406) 453 4711 Woodside Industries, Inc., Cavalier
Perfection Products Company, Greensboro Jerry Symington, (701) 265 8212
Pine Door Manufacturing, Darby Ray Sparks, (336) 272 7200
Steve Morris, (406) 821 3024
H Pyramid Cabinet Shop, Billings
H Pine Creek Cabinets, Inc. , Winston-Salem Nebraska
Michael Caligiuri, (336) 784 1061
Trevor Haar, (406) 671 7134 H C & H Cabinets and Countertops, Inc., Crete
Prestige Millwork Inc., Star John Culver, (402) 826 5887
H Sidney Millwork Company, Sidney David Allen, (910) 428 2360
Lee Harris, (406) 482 2810 H Designer Woods, Inc., Omaha
H Pridgen Woodwork Incorporated, Whiteville Mark Madsen, (402) 592 5868
WoodEz Fine Woodworks,LLC, Columbia Falls Jack Burgess, (910) 642 7175
Bill Woody, (406) 892 5194 H Kay Dee Company of Omaha, Omaha
H Riddley Cabinet Company, Inc., Kings Mountain Robert Schaefer, (402) 593 9663
Terry Riddley, (704) 435 8829
North Carolina Ratigan-Schottler, Beatrice
RLS Commercial Interiors, Inc., Wendell Patrick Ratigan, (402) 223 3220
H Arrowood Manufacturing, LLC, Norwood
Robert Stout, (919) 365 4086
Tresie Dunaway, (704) 474 3281
H Atlantic Commercial Caseworks, Charlotte
Rowland Woodworking, Inc., High Point New Hampshire
Jeffrey Cox, (336) 887-0700, ext. 25
Nathaniel Gatewood, (704) 393 9500, ext. 225 Aubin Woodworking, Inc., Bow
H Russell Carroll Manufacturing Inc., Raleigh Tony Aubin, (603) 224 5512
H Basepoint, Inc., Sharpsburg
Travis Gurley, (919) 779 2273
Larry Gutshall, (252) 977 7549 H C.W. Keller & Assoc. Inc., Plaistow
H Salisbury Millwork/Kronen Casework, Salisbury Charles Keller, (603) 382 2028
Cabinet Kraftsmen Specialties, Inc., Durham
Leon Mabe, (704) 603 4501
D.J. Spencer, (919) 477 6318 H Chamberlain Companies Inc., Salem
H Stanly Fixtures Co., Inc., Norwood Rebecca Janco, (603) 893 2606
Camps Construction , Matthews
Todd Curlee, (704) 474 3184
Jon Schumacher, (704) 321 1492 Commonwealth Construction & Millworks, N. Walpole
H Stephenson Millwork Co., Inc., Wilson Aram Reilly, (603) 445 5000
H Carocraft Cabinets, Inc., Charlotte
Lee Stephenson, (252) 237-1141, ext. 241
Larry Stroud, (704) 376 0022 Procraft Corporation, New Boston
Superior Millwork LLC, Wilmington James Wilcoxen, (603) 487 2080
Carolina Heritage Cabinetry, North Wilkesboro
Tony Gardner, (910) 763 0862
Jeff Sigmon, (336) 818 1078 The Woodworks Arch. Millwork, Londonderry
Triangle Case Work, Inc., Raleigh Robin Phillipson, (603) 432 4050
H Carolina Millwork of Rockingham, Rockingham
Ricardo Martinez, (919) 781 2270
Rebecca Parker, (910) 997 4551 Traditional Woodworking LLC, Piermont
Tuffo Construction of the Carolinas LLC, Huntersville Brian Henderson, (603) 272 9324
Craft Woodwork, Inc., Wilson
Peter Tuffo, (704) 506 6263
David Craft, (252) 237 7581
Unique Concepts, Wendell New Jersey
H Custom Wood Products of Rural Hall, Rural Hall
Fred Leach, (919) 366 2001 Architectural Woodworking Associates, Frenchtown
James Simmons, 336-969-6886, ext. 211
Venture, Inc., Fremont
John Gehman, (908) 996 7866
H D & L Cabinets, Inc., Graham
Reece Daniel, (252) 291 7125 H Artistic Doors and Windows, Avenel
Liz DeMarco, 336-376-6009, ext. 203
Walstonburg Cabinets, LLC, Walstonburg
Rick Autovino, (732) 726 9400
H Forbes Custom Cabinets LLC, Apex
Tony Holloman, (252) 753 4296 H B & M Custom Cabinetry, Blackwood
Ed Hallberg, (919) 362 4277
H Watson Wood Works, Winston-Salem
Mark Leonetti, (856) 227 9248
Forest Millwork, Inc., Asheville
Jesse Watson, 336-788-1881 ext. 23 Cabinet-Tronics, Inc., Birmingham
Alan Tenan, 828-251-5264, ext. 302
WoodTech/Interiors, Inc., Charlotte
Mike Lockwood, (609) 267 2625
Garland Woodcraft Co., Inc., Durham
Bob Binner, (704) 332 7215 H Collingswood Architectural Millwork, Collingswood
Harold Yates, (919) 596 8236
Yadkin Valley Cabinet Co, Inc, Mount Airy
Robert Engelke, (856) 854 0440
H Guilford Builders Supply Co., Greensboro
John Mosley, (336) 786 9860 H Corporate Woodworking, Inc., Fairfield
Mark Thompson, (336) 621-1208, ext. 11
Zepsa Industries, Inc., Charlotte
Bob Brennan, (973) 227 2211
Hajjar Cabinet Systems, Goldsboro
Ed Zepsa, (704) 583 9220 Eastern Millwork Inc., Jersey City
William Hajjar, (919) 735 7547
Andrew Campbell, (201) 451 9510
H Hardwood Designs, Hillsborough
Tom Carstens, (919) 643 1100 H ELS Educational & Laboratory Sys., Fairfield
David Roitburg, (973) 227 1000
H Kewaunee Scientific Corporation , Stateville
Cynthia Freeze, (704) 873 7202 Epic Millwork, Somerset
Vincent Biviano, (732) 296 0273

62 I
designsolutions spring 2013
H Harrington Parker, Ramsey
James Agresti, (201) 825 8500
Nevada Forest Materials Inc, Buffalo
Jeffrey Hoffman, (716) 895 3900
CMD INC., Henderson
H Hausmann Industries, Inc., Northvale Ryan Rimbert, (702) 990 4478 Four Daughters, LLC, Long Island City
Keith McHugh, 201-767-0255, ext. 122 Moshe Granit, (718) 391 0440
Complete Millwork Services Inc., Carson City
Hutchinson Cabinets, Sewell David Becher, (800) 382 7486 H Genbrook Millwork, Inc., Greene
George Hutchinson, (856) 468 5500 Joshua Browning, (607) 656 7563
Herrick & O’Herron, Inc., Las Vegas
Larena Construction, LLC, Livingston Brian Herrick, (702) 651 9725 George V DeVito Master Carpenter Inc, Medford
Jennifer Miller, (973) 422 9000 George DeVito, (631) 286 5080
Metal & Millwork, Inc., Carson City
Lukach Interiors, Inc., Hasbrouck Heights Mike Tornesello, (415) 710 8010 GER Architectural Manufacturing, New Rochelle
Mike Stefanoski, (973) 777 1499 George Roach, (914) 633 7799
H Pacific Showcase, Las Vegas
Metroplex Products Company, Monroe Township Steve Keane, (702) 796 7272 H Hudson River Industries, Schenectady
Peter Herring, (732) 561 2021 Daniel Kelly, (518) 346 2646
Victory Woodworks, Sparks
Metropolitan Woodwork , Union Jim Elliker, (775) 348 7552 Island Architectural Woodwork, Inc., Ronkonkoma
Darren Commander, (908) 687 8443 Edward Rufrano, (631) 737 0020
H Osborns Mill, Farmingdale New York J. Petrocelli Contracting, Inc., Ronkonkoma
John Petrocelli, (631) 981 5200
Mark Piccolo, (732) 751 0889
AllCraft Fabricators, Inc., Hauppauge
H Prime Design Custom Millwork, Blackwood Arthur Giacalone, (631) 951 4100 H Jackson Woodworks, Inc., Brainardsville
Maureen Pollard, (856) 228 0001 Christine Jackson, (518) 651 2032
H Artone, LLC, Jamestown
RPI Industries Inc., Medford Michael Calimeri, (716) 664 2232 H Kirchhoff-Consigli Construction Mgt., Pleasant Valley
Peter Palko, 609-714-2330, ext.103 Gordon Cruikshank, (845) 635 1800
H Bauerschmidt & Sons, Inc., Jamaica
Salon Interiors, South Hackensack Fred Bauerschmidt, (718) 528 3500 Lexi Interiors, Inc., Auburn
Walter Siegordner, 201-488-7888, ext. 11 Chris Colella, (315) 253 3843
Beaver Creek Industries, Inc., Canaseraga
H Sloan & Company, Inc., West Caldwell Gary Bajus, (607) 545 6382 Lifetime Design Corp, Deer Park
Gennady Zeretsky, (973) 227 3555 James Romanelli, 631-242-1162, ext.221
H BGI Interiors, Lackawanna
Somerset Wood Products Co., Raritan David Owczarzak, 716-893-1417 ext 405 M&D Millwork, LLC, Amityville
Lester Bloch, (908) 526 0030 Darren Winter, (631) 608 4444
H Bloch Industries LLC, Rochester
Brian Geary, (585) 334 9600 Michael Verde Millwork Inc., Bridgehampton
New Mexico Bowers and Sons Hardwood Lumber, Lee Center
Michael Verde, (631) 237 4797
H Albuquerque Cabinet Brokers, LLC, Albuquerque Todd Bowers, (315) 337 1621 H Millco Woodworking LLC, Hall
Scott Tregembo, (505) 345 4331 Charles Millerd, 585-526-6844, ext.18
Cabinet Shapes Group LLC, Long Island City
H Antix, Inc., Las Cruces Maria Seretis, (718) 784 6255 MMC Millwork, Albany
Anthony Harris, (575) 526 2398 Lief Larsen, (518) 465 4109
Carob Industries Inc, Holbrook
Artistic Millwork & Cabinets, Albuquerque Robert Levey, (631) 225 0900 MTD Corporation, West Babylon
Ronald Sanchez, (505) 899 6006 Matthew Turnbull, (631) 491 3905
Centre Interiors Woodworking Co., Inc., Ozone Park
H Casework Technologies Ltd., Albuquerque Alex Lee, (718) 323 1343 Nordic Interior, Inc., Maspeth
Tony Perno, (505) 872 2067 Helge Halvorsen, (718) 456 7000
Champion Millwork, Inc., Syracuse
H Fame Mfg/NM School Products, Albuquerque Mark Zapisek, (315) 463 0711 NR Wood Design, Brooklyn
Pete Moore, 505 884 1426 ext. 2 Franklin Nunez, (718) 497 2566
H Christiana Millwork, Jamesville
H Jaynes Structures, Inc., Albuquerque Ross Tuzzolino, 315-492-9099, ext.306 NY Custom Interior Millwork Corp., Long Island City
Greg Krause, (505) 345 8591 Elizabeth Lagos, (718) 392 1600
H Clearwood Cust. Carpentry & Millwork, E. Syracuse
H OGB Architectural Millwork, Albuquerque Kyle Latray, 315-432-8422, ext. 12 O’Boy Woodworking, DBA Finnryan Millwork, Yonkers
Rick Thaler, (505) 998 0000 Michael O’Boy, (914) 423 0477
Colecraft Commercial Furnishings, Jamestown
H P&M Caseworks, LLC, Albuquerque David Messinger, (716) 488 2810 H Petersen Geller Spurge, Inc., Hudson
Wynn Roberts, (505) 883 4617 Scott Manchester, (518) 828 2608
H Commercial Display and Design, LLC, Norwich
Paramount Custom Cabinets inc., Albuquerque Bernard Freudenmann, (607) 336 7353 Precision Cabinets Inc., Smithtown
Philip Menicucci, (505) 842 5678 Peter Loscialpo, (631) 543-3870, ext. 105
H Conley Caseworks, Elma
Sandoval Wood Works, Gallup David Lock, (716) 655-5830, ext. 406 Prowood Inc, Brooklyn
Roberto Sandoval, (505) 778 5675 Tamas Matyek, (718) 381 3758
Creative Laminates, Inc., Syracuse
Sunray Construction, Inc., Albuquerque Dennis Brackley, (315) 463 7580 H Quaker Millwork and Lumber, Inc., Orchard Park
William Frahm, (505) 344 4180 Robert Raber, 716-662-3388, ext. 19
Digifabshop, Hudson
H Tech Craft Company, Albuquerque John Tompkins, (518) 249 6500 R.B. Woodcraft, Inc., Syracuse
Robert Gallegos, (505) 821 0555 Raymond Brooks, (315) 474 2429
H E. M. Pfaff and Son, Inc., Horseheads
Ulibarri Construction, Albuquerque Susan Alexander, (607) 739 3691 Ridge Cabinet & Showcase, Inc., Rochester
Ben Ulibarri, (505) 346 1093 Steve Lader, (585) 663 0560
Elli NY Design Corp., Maspeth
Peter Ligas, (718) 418 9002

spring 2013 I designsolutions 63

 Firms marked with a green star (H) are H CourtHouse Mfg, dba Chappell Door, Washington Courthouse Royal Cabinet Design Co., Brook Park
accredited participants in the AWI Quality Wayne Gooley, (740) 335 2727 Joe Estephan, (216) 267 5330
Certification Program as of the print date.
For an up-to-date status, go to awiqcp.org. Creative Cabinets, Ltd, Lancaster Salem Mill & Cabinet, Salem
Troy Shurtz, (740) 689 0603 Bruce Winters, (330) 337 9568
H Rimi Woodcraft Corp., Bronx
George Desis, (718) 824 3900 H Crowe’s Cabinets, Inc., Lowellville Sauder Manufacturing Company, Archbold
Paul Crowe, (330) 536 2545 Brent Holland, (800) 537 1530, ext. 3783
H Riverfront Custom Design, Inc., N. Tonawanda
Paul Tucker, (716) 693 2501 H Custom Millwork Designs, Oakwood Village Schantz Custom Woodworking, Orrville
James Torrence, (440) 232 4644 Victor Schantz, (330) 682 6065
H Rochester Custom Millwork LLC, Rochester
Lesley Jarbe, (585) 271 0810. ext. 104 DB Cabinets & Construction, Arcanum Sheridan Millwork & Cabinetry, Cleveland
Dennis Benedict, (937) 692 5633 Ed Sheridan, (216) 663 9333
Scanga Woodworking Corp., Cold Spring
John Paul Scanga, (845) 265 9115 H Dover Cabinet Industries, Inc., Dover Signature Store Fixtures, Columbus
John Perkowski, (330) 343 9074 Mario Grilli, (614) 469 1230
H SDC Millwork, Victor
James Spelman, (585) 657 4600 Dutch Valley Woodworking, Inc., Sugarcreek H Southern Cabinetry Inc., Bidwell
Dale Mullet, (330) 852 4319 Don Strieter, (740) 245 5992
Solid Surface Craftsman, Inc., Glenville
Alan Boulant, (518) 388 8644 H Eurocase Arch. Cabinets & Millwork, Millersburg H Stanton Millworks, Cincinnati
Nick Mullet, 330-674-0681, ext. 2005 John Zembrodt, (513) 961 7201
Thatcher Brook Millwork And Door, Glens Falls
Pieter Lansing, (518) 761 0568 H Forum Manufacturing Inc., Milford Center Stoller Custom Cabinetry, Inc., Sterling
Nancy Kovacs, (937) 349 8685 Greg Stoller, (330) 939 6555
H Tobin Woodworking, Inc., Farmingdale
Jody Tobin, 631-249-1614, ext.308 High Tech Performance Trailers, LLC, Painesville Stull Woodworks Inc., Ludlow Falls
Matthew Kemp, (440) 357 8964 Brian Stull, (937) 698 8181
Traver Millwork Inc, Dryden
David Traver, (607) 844 5555, ext. 3 H Hoge Lumber Company, New Knoxville Tarik Yousef Fine Furniture, raymond
Mike Burd, (419) 753 2263 Tarik Yousef, (614) 561 8122
T-Squared Custom Millwork Inc., Oxford
Tracy Tarbell, (607) 843 2442 JAH Woodworking, LLC, Blomingdale H Ted Bolle Millwork, Inc., Springfield
John Humpe, (740) 266 6949 Patrick Nartker, (937) 325 8779
Urban WoodWorks, Ltd, Woodhaven
Gabi Bharat, 718-521-1141, ext.204 H Keim Lumber Company, Charm H Topcraft, Inc., Barberton
Paul Hershberger, (330) 893 2251 Todd Ondecker, (330) 753 3083
Vella Interiors, Inc., Long Island City
Michael Vella, (718) 729 0026 Merritt Woodwork, Mentor H Vaughn Interior Concepts, Inc, Dayton
Keith Merritt, (440) 942 0205 Craig Vaughn, (937) 220 9996
H Wood Etc., Inc., Syracuse
Arnold Schmidt, (315) 484 9663 H Mill Tech, LLC, Columbus Viox Services, Inc., Cincinnati
Kevin Henderson, (614) 275 1888 Joe Balzer, (513) 679 3329
Woodmotif Inc., Hempstead
George Dimitriadis, (516) 564 8325 H Mock Woodworking Co., Zanesville H Vivo Brothers Inc., Poland
Douglas Mock, (740) 452 2701 Vince Vivo, 330-629-8686, ext. 11
Woodtronics, Inc., Yorktown Heights
Jan E. Efraimsen, (914) 962 5205 Mr. O’s Cust. Millwork & Store Fixtures, North Canton Volpe Millwork Inc., Cleveland
Neil Fritz, (330) 494 8734 John Volpe, (216) 581 0200
Zale Contracting Inc., Ridgewood
Benny Zale, (718) 366 1092 H Nagele Manufacturing Co., Brookpark H Wittrock Woodworking & Mfg., Cincinnati
Ron Nagele, (216) 433 1100 Chris Wittrock, (513) 891 5800, ext 315
Ohio Northeastern Cabinetry, Willoughby H Wood Concepts Inc., Cleveland
Alliance Millwork & Manufacturing, LLC., Trotwood Pat Primozic, (440) 918 9040 Jackie Even, (216) 579 0500
Martha Grauduss, (937) 529 7571 Ohio Wooden Bench Co, Cincinnati H Wood Dimensions Inc., Cleveland
H Amtekco Industries, Inc., Columbus Kenneth Luken, (513) 941 5100 Thomas Rocks, (216) 251 5509
Bruce Wasserstrom, (614) 228 6590 Ohio Woodworking Company, Norwood
H ArtWoodworking & Mfg. Co., Cincinnati Tom Frank Jr., (513) 631 0870 Oklahoma
Michelle Clemons, 513-681-2986, ext. 21 Okeana Hardwoods & Mfg., Okeana Alpha Omega Woodworks, LLC., Norman
H Bruewer Woodwork Mfg. Company, Cleves Ken Zawaski, (513) 738 3421 PJ Pinkerton, (405) 364 0022
Ralph Bruewer, (513) 353 3505, ext. 209 P & T Millwork Inc., Chagrin Falls Bearwood Concepts Inc., Tulsa
C & M Millwork, Inc., Columbus Michael Doyle, (440) 543 2151 Jeff Cronin, (918) 933 6601
Charles Caudill, (614) 443 3500 H Reserve Millwork, Inc., Cleveland H Cooper Cabinet Systems , Oklahoma City
H Cassady Woodworks Inc., Dayton Tony Azzolina, (216) 531 6982 Matt Cooper, (405) 528 7220
Tom Joch, (937) 256 7948 Riceland Cabinet Corporation, Wooster H EGR Incorporated, Oklahoma City
Conte Custom, Ltd, Columbus Steve Yoder, (330) 601 1071 Darren Lister, (405) 943 0900
Sam Amore, (614) 595 3558 H Rivereast Custom Cabinets, Inc, Toledo H FADCO, Inc., Tulsa
H Cooper Enterprises, Inc., Shelby John Weiser, (419) 244 3226 Bob Vincent, (918) 832 1641
Monty Friebel, (419) 347 5232 Riverside Construction Services, Inc., Cincinnati H Lakewood Cabinetry, Langley
H Corna Kokosing Construction Co., Westerville Robert Krejci, (513) 723 0900 Doug Olson, (918) 782 2203
Jim Graves, (614) 901 8844

64 I
designsolutions spring 2013
 National Franchise Resources, Tulsa
Philip Hoey, (918) 270 4886
Glenshaw, Allison Park
Kenneth Rogg, (412) 753-0231, ext. 302
Puerto Rico
Cabinet Maker of P.R. Inc., Lajas
H Wood Systems, Inc., Tulsa G-Seven Ltd., Hatfield Neftali Lluch, (787) 899 5900
Casey Decker, (918) 749 7062 Doug Pritchard, (215) 822 3839
H Hambleton Group Companies, Inc., San Juan
H Harmony Plus Woodworks Inc., Dillsburg Tito Suarez, (787) 781 8186
Oregon Terry Frankenfield, (717) 432 0372
Riax Contractors Corp, San Jaun
H Advance Cabinet Designs, Inc., Eugene H Hill Woodworks, Inc., Brogue Axel Riveria, (787) 754 6410
Andy Michaud, (541) 465 3394 Jim Hill, (717) 927-9771, ext. 105
H Architectural Millwork Mfg. Co., Eugene
Jarold Stump, (541) 689 1331
H Hoff Enterprises Inc., Johnstown
Kurt Freidhoff, (814) 535 8371
Rhode Island
All State Fabricators, Div. of EMI Industries, Cranston
H Artek, Inc., Beaverton Interior Creations Inc., Philadelphia William Johnson, 401-785-3900, ext. 108
Allen Kullgren, (503) 641 6877 John DiGregorio, Jr., (215) 425-9390, ext. 12
H Artisan Millwork, LLC, Pawtucket
Charles Marpet Fine Woodworking, Cottage Grove Ivan C. Dutterer, Inc., Hanover Carolee Thomas, (401) 721 5500
Charles Marpet, (541) 767 0674 Whitney Coombs, (717) 637 8977
H Design Fabricators, Inc., Cranston
H Fuller Cabinets, Eugene H J.C. Snavely & Sons, Inc., Lancaster Roberta Degraide, (401) 944 5294
Kallin Benson, (541) 349 9887 Alan Hinson, (717) 291 8989
H Frank Shatz & Company, Inc., Warwick
Parts & Pieces, Inc., Gresham JWI Architectural Millwork, Mercersburg Randy Shatz, (401) 739 1822
Darrel Fugman, (503) 665 8991 Gary Ahalt, (717) 328 5880
H Herrick & White, Ltd., Cumberland
Salem Wood Products Inc., Salem K & G Artisan Builders, dba Hist. Restorations, Lancaster Kenneth Bertram, (401) 658-0440, ext. 327
Dan Koonce, (503) 364 9772 Danielle Keperling, (717) 291 4688
H Jutras Woodworking, Inc., Smithfield
W.C. Cabinets dba Fixturelogic, Eugene Lefever Millworks, Mechanicsburg Paul Jutras, (401) 949 8101
Mike Petrushkin, (541) 485 7579 Stan Gerberich, (717) 691 7800
H Millwork One, Inc., Cranston
H Master Woodcraft Corporation, Washington John Fish, (401) 738 6990
Pennsylvania David Diesel, (724) 225 5530 ext. 200
Modern Industries, Inc., Providence
H Allegheny Millwork & Lumber, Lawrence H Merrigan Corp dba/Nat. Woodwork Mfg, Bethlehem Edmund Capozzi, (401) 331 8000
Rex Coen, (724) 873 8700 Christine Merrigan, (610) 317 6300
H T & C Woodworking, Pawtucket
H American Millwork & Cabinetry, Inc., Emmaus Mitre Wright Inc., York Ferdinando Moniz, (401) 728 9663
George Reitz, (610) 965 0040, ext. 224 Todd Salony, (717) 812 1000
H Artisan Display Inc., Red Hill
John Wassmer, (215) 679 8577
Morris Black and Sons, Allentown South Carolina
Charles Buchsbaum, (610) 264 2700
H Biggs Casework, Florence
H Beam’s Custom Woodworking Inc., Morgantown H New Holland Church Furniture, New Holland Elizabeth Mozley, (843) 673 0081
William Beam, (610) 286-9040, ext 21 Bradley Kurtz, (717) 354-4521, ext. 111
H Blue Ridge Cabinetworks, LLC, Spartanburg
Bentley & Collins Company, Montoursville Parisi Inc., Newtown Benjamin Ratterree, (864) 595 0398
Kurt Fritz, (570) 546 3250 Joe Parisi, (215) 968-6677, ext. 124
H Cabinets of the Carolinas, Inc., Greenville
H Boyertown Planing Mill Company, Boyertown Precise Graphix, Emmaus Kenny Witthuhn, (864) 292 9901
John Bingaman, (610) 367-2124, ext. 107 Jim Putkisto, (610) 965 9400
H Charleston Woodworks, Inc., Charleston
Brightbill Industries Inc., Harrisburg H Premier Woodcraft, Coatesville James Jacobs, (843) 744-0016, ext. 1
Martin Brightbill, (717) 233 4121 Joseph Arena, (610) 383-6624, ext. 113
H Coastal Millwork & Supply LLC, Summerville
Burns & Wohlgemuth, Bensalem H Rynone Manufacturing Corp, Sayre Chris Wagner, (843) 873 9192
George Wohlgemuth, (215) 638 9672 Richard Rynone, (570) 888 5272
Daniel Island Woodworks, Inc., North Charleston
Campbell & Strasser, Bath T.C. Millwork Inc., Bensalem Polly Epstein, (843) 566 1600
Justin Strasser, (610) 837 6604 Dennis Kubach, (215) 245 4210
H Designer Cabinetry by Flanders, Gaston
Commercial Stainless, Bloomsburg H Team Laminates Company, Pittsburgh Paul Flanders, (803) 739 0034
Brian Wawroski, 570.387.8980 x207 John Earnest, (412) 323 1911
James McGrew Cabinetmakers, Columbia
Construction Specialties, Inc., Muncy H Tech 2000 Woodworks, Inc., Jeannette James McGrew, (803) 933 9988
Craig Richie, (570) 546 5941 Keith Geller, (724) 522 9914
H Low Country Case and Millwork, Inc., Ladson
H E. B. Endres Inc., Huntingdon Top of the Line Inc., Lester David Stasiukaitis, (843) 797 0881
Richard Endres, (814) 643-1860, ext. 104 Mark Blackburn, (610) 521 7441
M&M Custom Woodworks, Inc., Greenville
Eastern Millwork, Scranton Viking Woodworking LLC, Pittsburgh Gregory Mock, (864) 269 0888
Matthew Borne, (570) 344 7128 Pete Schoonmaker, (412) 381 5171
Maple Glenn, LLC, Conway
F. DeFrank & Son Custom Cabinets, Inc., Smock Wood-Metal Industries, Selinsgrove Jeff Mortensen, (843) 458 5254
Dominic De Frank, (724) 430 1812 Scott Groce, (570) 374 1176
H PCI Cabinetworks, Harleyville
H Fine-line Cabinets, Inc., Hollidaysburg H Wyatt Incorporated, Pittsburgh Stephen Wilkinson, 843-462-7509, ext. 101
Douglas Irvin, (814) 695 8133 Frederick Episcopo, (412) 787 5800
H Peralta Woodworks, Inc., Columbia
H Giffin Interior & Fixture, Inc., Bridgeville Ernie Peralta, (803) 518 0183
Gordon Giffin, (412) 221 1166

spring 2013 I designsolutions 65

 Firms marked with a green star (H) are Clay Zorn, (615) 331 4076 Martine Iverson, (210) 667 1717
accredited participants in the AWI Quality
Certification Program as of the print date. H Tate Ornamental Inc., White House Contemporary Concepts Inc, Texarkana
For an up-to-date status, go to awiqcp.org. John Mullen, (615) 672 8333 Danielle McRaven, (903) 831 4482, ext. 3
H Satterfield Woodworking Inc., Greer Vintage Millworks, Inc., Nashville H CRC-Mastercraft, Inc., Houston
Gene Fowler, (864) 877 0706 Margaret Dunn, (615) 244 8044 Candi Graves, (281) 897 8880
H Specialty Woodworks, Inc., Lexington
Graham Houghten, (803) 957 8872
Texas Cubic Custom Cabinets Corporation, Grand Prairie
Michael Haynes, (972) 647 4090
21st Century Manufacturing, Houston
Thompson Construction Cabinets & Millwork, Murrells Inlet Paul Birdwell, (832) 593 0123 CWW Woodwork, Houston
James Thompson, (843) 651 0071 Obed Morales, (281) 530 1505
H 3V Company, Houston
H Woodco Inc., Piedmont Ruben Villarreal, (281) 717 1200 Cypress Millwork, Inc., Houston
Brian Dobson, (864) 277 4001 Hector Noriega, (713) 868 3488
H A.A.E. Manufacturing Company, Inc., Rio Hondo
J. Matthew Eckert, (956) 748 0033 Decor Architectural Millwork Inc., Houston
South Dakota Michael Sobota, (281) 445 5353
Abilene Millwork, Abilene
GHC Casework, Sioux Falls Dimension Millworks Inc, San Antonio
Andrew Valdez, (325) 677 8856
Dillon Kolbo, (605) 336 6082 Ronnie Hodge, (210) 281 0356
Acacia Originals, LLC, Kingwood
JMJ Caseworks, Sioux Falls Egia LLC, Stafford
Will Fuller, (877) 565 5995
Jason Peters, (605) 332 0805 Sue Kelly, (281) 561 9030
ALC-Collegedale, Round Rock
Maloney, Inc., Sioux Falls H Environment LTD, Houston
Scott Howell, (512) 610 2200
Chris Maloney, (605) 368 5214 Mel Manning, (281) 983 0100
H Alpha Omega Casework, Inc., Taylor
H Riss & Associates Cabinets & Casework, Black Hawk Environs Architectural Millwork, LLC, Austin
Alan Williams, (512) 762 9355
Timothy Roth, (605) 718 5080 Matt Clawson, (512) 829 4594
H Anton Cabinetry, Arlington
Facility Construction Services, Inc. (FCS), Dallas
Tennessee John Anton, (817) 460 8681
Paul Holden, (214) 381 0101
H American Foodservice, Savannah H Apple Contractors, Houston
Robert Dean, (713) 681 2218 Fish Construction, Inc., Stafford
Ralph Egee, (731) 925 2200
Scott Fish, (281) 261 3375
ANA Woodworks, LLC, Chattanooga Ar-Case, dba Arch. Caseworks of TX, San Antonio
Marie Plata, (210) 735 5175 H Freedom Architectural Millwork, Cleveland
Mike MacKinnon, (423) 867 3171
David Smith, 281-592-5377, ext. 112
Architectural Millwork Solutions, LLC, Jackson H Austin Conor Millwork, Joshua
Melissa Plihal, (817) 295 8837 H Global Casework Manufacturing, Sugar Land
Mark Taylor, (731) 427 9631
George Abuata, (281) 494 6181
Architectural Surfaces L.L.C., Chattanooga H Autumnwood Millwork LLC, New Waverly
David Rucker, (936) 344 9784 Goebel Woodwork, Cuero
Larry Leigh, (423) 899 6233, ext. 105
Robert Goebel, (361) 277 5220
CampbellRhea-ICI, Paris Bespoke Millwork, Stafford
Joel Stary, (281) 598 4880 Hollman Inc., Irving
Jim Arthurs, (731) 642 4251
Travis Hollman, (972) 815 4000
Clancy Custom Woodworking, Knoxville Bill Peregoy,Inc. DBA Tx-cc, New Braunfels
Bill Peregoy, (210) 338 9222 Houston Cabinets, Houston
Art Clancy, (865) 938 4638
Rick Keschinger, (713) 349 0848, ext. 201
CNC Works, Sparta Brochsteins, Houston
Deborah Brochstein, (713) 666 2881 H Howard-McKinney, Inc., Tyler
Roger King, (931) 739 9292
Chris Johnson, (903) 593 3651
H Cumberland Architectural Millwork, Inc., Nashville Brownsville Architectural Millwork, Brownsville
Minnie Spieckermann, (956) 831 3351 Hull Historical, Fort Worth
Andrew Martin, (615) 254 1710
Brent Hull, (817) 332 1495, ext. 202
Memphis Millwork. div. Creative Contractors, Memphis H Buda Woodworks LP, Buda
Bill Kleinsorge, 512-312-0550, ext. 302 H Hunter Millworks, Inc., Lubbock
David Rhea, 901-525-9966, ext. 203
Dan Poole, (806) 792 4864
H Memphis Plywood Corporation, Memphis Carpentry Associates, Midlothian
Peter Sandoval, (469) 766 1069 Impressions Architectural Millwork, Cypress
Hunter Mitchell, (901) 948 5531
Brian Dumaine, (281) 477 8080
Mill Creek Associates, Inc, Antioch Cartwright Wood Products LLC, Spring
Jimmy Cartwright, (281) 924 9988 Jacobe Bros. Construction Ltd,, Tyler
Stephen Landers, (615) 832 0737
Ken Jacobe, (903) 592 5091
New Appearance Cabinet, Inc., Nashville Casework Solutions LLC, El Paso
Juan Soto, 915.875.8640, ext. 11 H Janov Millwork and Mfg., LLC, Austin
Philip McGhee, (615) 279 9663
Daniel Janov, (512) 894 3443
H Peerless Woodworking Corp., Bluff City CG Construction and Architectural Millwork, El Paso
Carlos Gallardo, (915) 239 1980 H JC Millwork Inc, Princeton
Donald M. Jacobson, (423) 538 7167
Billy Palmertree, (972) 734 3375
H R.J. Wherry & Associates, Madison H Classic Millwork & Products Inc., El Paso
Bruce Spitz, (915) 833 9922 H Jericho Woodworks, Stafford
Colton Wherry, (615) 868 1821
Nidal Abuata, (281) 969 7947
SledgeCraft, Inc., Murfreesboro H Colony Cabinets, Inc. dba CCI Group, Longview
James Hodges, (903) 753 2488 H Joshtom Millwork, Houston
Trevor Sledge, (615) 898-1223, ext. 11
Tobin Englet, (281) 561 8484
Steve Ward and Associates, Inc., Nashville Comac Fixtures, Inc., Amarillo
Ruby Weiss, (806) 376 4511 K.P. Kabinets, Cuero
Hank Webb, (615) 350 7310
David Kacir, (361) 275 8472
Sudberry Millwork Inc., Nashville Concepts in Cabinetry, St. Hedwig

66 I
designsolutions spring 2013
 Keystone Millwork Inc., Bryan H Valcour Casework Inc., Helotes BenchMark WoodWorks, Inc., Virginia Beach
Robert Kraus, (979) 823 4846, ext. 103 Edward Clukey, (210) 695 2155 Don Robuck, (757) 971 3380
H Lutz Woodworks LLC, Wylie H Victoria Cabinetworks, Victoria H Blair Dumond Inc., Richmond
Greg Lutz, (972) 429 5521 Doug Giles, (361) 578 0263 Chris Saltonstall, (804) 359 2090
Maverick Door and Millwork Inc., Schertz Warenoff’s Millwork, dba Robert Warenoff Ent., Pflugerville H Campostella Builders, Norfolk
Craig Montgomery, (210) 659 5553 Robert Warenoff, (512) 990 5155 Doyle Palmer, (757) 545 3212
H MEDCO Construction, LLC, Dallas Watson & Cochran Inc., Dallas H Capital Components & Millwork, Elkwood
Rod Luedtke, (214) 820 9449 Kyle Cochran, (214) 943 2033 Michael Klekamp, (540) 825 3600
H MGC Millwork, LP, Houston Woodhaus, Carrollton Cavanaugh Cabinets , Charlottesville
Kari Tryggvason, (713) 800 7300 Jeff Dale, (972) 245 8117 Jim Cavanaugh, 434-977-7100, 1#
H Millennia Cabinetry Inc., Helotes WoodMark, New Caney Charles Yost Custom Cabinets Inc., Newport News
Mia Elizalde, 210-688-3107, ext. 312 Tony Figueriedo, 281.572.7200, ext. 222 Charles Yost, (757) 873 2147
MSF Spirit LLC, Carrollton Clark’s Lumber & Millwork, Inc., Ruther Glen
Dean Cline, (972) 444 8400, ext. 111 Utah Roger Doug Clark, (804) 448 9985
H NC Group, Inc., Houston H Anderson Mill Inc., Salt Lake City Columbus Woodworks, Inc., Lynchburg
Daniel Tamez, (281) 459 9418 Scot Marrott, (801) 322 2112, ext. 4 Tim Columbus, (434) 528 1052
H Odom Construction Services, Inc., Mesquite H Associated Fixture Maufacturing Inc., Magna H Commercial Custom Cabinet, Inc., Richmond
Veronica Odom, (972) 289 4447 Scott Colledge, (801) 250 7620 Gary Carlton, (804) 228 2100
H Panel Specialist, Inc., Temple H Boswell Wasatch Mill, Springville H D & D Millwork, Portsmouth
Matthew Robinson, (254) 774 9800 Chris Boswell, (801) 489 7527, ext. 103 Michael Moulton, (757) 558 6049
Phenix Architectural Woodwork, Inc., San Antonio H Contempo Cabinet & Mill, Salt Lake City Fairfax Woodworking, Inc., Manassas
Cody Coleman, (210) 648 6015 Scott Carroll, (801) 886 9111, ext. 101 Eugene Kim, (703) 339 9578
H Phoenix Millwork, Alvin Cozzens Cabinets LLC, Cedar City Five Star Fab & Fixture, Salem
John Savoy, (281)388-2211 ext. 135 Paul Cozzens, (435) 586 7618 Bryan Wilkinson, 540-444-0456, ext. 122
H Pioneer Architectural Millwork, Houston DGS Store Fixtures, Payson H Gaithersburg Cabinetry & Millwork, Warrenton
Robert Crane, (713) 461 8203 Scott Stewart, (801) 465 4853 Millie Thomas, (540) 347 4551
H Pioneer Millworks, Inc., Amarillo Exclusive Cabinets, Sandy H Hackney Millwork, Inc., West Point
Bill Couture, (806) 622 3201 Travis Pelch, (801) 566 2012 Gene Hackney, (804) 843 3312
Quest Millwork, Stafford H Fetzer Architectural Woodwork, West Valley City House of Doors, Roanoke
Jon Deutser, (832) 391 3534 Erik Fetzer, (801) 484 6103 Steve Graboyes, (703) 751 9000
RLN Corporation dba RLN Industries, Inc., Brenham H Fondell Architectural Woodwork, Inc., Lehi H IBS Corp., Manassas
Alan Sawatzky, (409) 316 0555 Jon Fondell, (801) 768 4467, ext. 217 Paul Bell, (703) 631 4011
H Robert Shaw Mfg. Co., Inc., Fort Worth Granite Mill & Fixture Co., Salt Lake City Ideal Building Supply Inc., Rocky Mount
Robert Shaw, (817) 927 2557 Kale Stevenson, (801) 467-3222, ext. 303 Cecil Hodges, (540) 483 5511
Rodgers-Wade, Paris H Huetter Mill & Cabinet Inc., Murray H Jefferson Millwork & Design, Inc., Sterling
John Hamer, (903) 739 2500 Heath Harkey, (801) 263 9437 Michael Corrigan, 703-260-3370, ext. 222
H Roomi Group Corporation, Houston Legacy Mill & Cabinet LLC, North Salt Lake H Julian Swain Builders, Inc., Norfolk
Faisal Hussain, (281) 405 8165 Kurt Draper, (801) 292 0795 Julian Swain, (757) 459 8000
Signature Cabinets, Dallas Mapleleaf Cabinets, Inc., Salt Lake City H Karn Custom Woodwork, Richmond
Perry Hix, (214) 688 1966, ext. 16 Kevin Affleck, (801) 262 7741 Kathy Karn, (804) 213 0300
H TDR Millwork, Anna H Riverwoods Mill, Inc., St. George H Kearney & Associates, lnc., Culpeper
Michael Riley, (972) 924 2500 Chris Peterson, (435) 673 4145 Patrick Kearney, (540) 423 9511
H Terrill Manufacturing Company, San Angelo Salt Lake Cabinet, Murray H Key Woodworking, Inc., Springfield
Kent Terrill, (325) 655 7133 Brad Miles, (801) 269 0701 Ken Lee, (703) 914 2526
Tomco, Inc., San Antonio H Wavell-Huber Arch. Wood Products, N. Salt Lake City Lantz Custom Woodworking, Harrisonburg
Tom McGee, (210) 270 9510 Jeff Sessions, (801) 936 6080 Douglas Lantz, (540) 438 1819
Top Notch Cabinet Installation Inc., Manvel H Westwood Mill & Cabinet, Inc., Salt Lake City H Nielsen Builders, Inc., Harrisonburg
Pete Meade, (832) 548 1483 Jim Smith, (801) 972 9575 Tim Snider, (540) 434 7376
H Trautschold Millwork, Ltd., Waco H Potomac Architectural Millwork, Lorton
Mike Sheedy, (254) 752 6547 Virginia Nelly Mori, 703-440-6800, ext. 104
Annandale Millwork & Allied Systems Corp., Winchester
H Trimco, El Paso H Premier Millwork and Lumber Co., Virginia Beach
Robert Frogale, (540) 665 9600
Chris Elguea, (915) 855 8501 George Melnyk, 757-463-8870, ext. 101
Arboleda Cabinets Inc., Richmond
Triton Industries,dba Millwork Services, San Marcos Premier Mouldings , Harrisonburg
Guillermo Arboleda, (804) 230 0733
Crystal Griffin, (512) 805 0665 Chris Dawson, (540) 437 2014
H Ashland Woodwork, Inc., Ashland
Tyler Wood Works, Inc., Troup Ruffin & Payne, Inc., Richmond
J. Clay Stiles, (804) 798 4088
Jerry Mabry, (903) 842 2443 John Barnett, (804) 329 2691

spring 2013 I designsolutions 67

 S & T Commercial Cabinets LLC, Hampton Skagit Architectural Millwork, Mt. Vernon H SourceCut Industries, Inc., Osseo
John Nissen, (757) 726 2802 Craig Wells, (360) 336 9587 Brad Wiedenhoeft, 715-597-6525, ext. 12
H Southside Manufacturing Corporation, Danville H Specialty Wood Manufacturing, Tacoma Stück Wood Works Inc., Milwaukee
Larry Hinton, 434-836-6347, ext. 24 Sonja Kallam, (253) 531 1335 Jeff Stück, (414) 351 5595
H Taj Construction Inc., Fredericksburg W.W. Wells Millwork LLC, Everett H TechlineUSA, Waunakee
Dinesh Jasani, (703) 402 1537 Steve Oswald, (425) 259 9155 John Bannon, (608) 849 4181
H The Millwork Specialist, LLC, Richmond H Westmark Products, Inc., Tacoma H Thermo Fisher Scientific, Two Rivers
Mike Karn, (804) 262 9296 Dennis Milsten, (253) 531 3470 Rick Johnson, (920) 794 6205
H Virginia Millwork, Richmond H Trimpac, LLC, Marshfield
James Hamilton, (804) 266 5264 Wisconsin Scott Williamson, (715) 384 4144, ext. 129
Waterfront Lumber Co., Inc., Newport News A. Fillinger Inc., Milwaukee H Wisconsin Bench, Thorp
Nick Griffith, (757) 245 0091 Ryan Fillinger, (414) 353 8433 Kent Barby, (715) 669 5360
Wellingford Systems, Inc, Manassas American Woodwork, Inc., Milwaukee H Wisconsin Built, Inc., Deerfield
Joseph Yang, (571) 379 5500 Gary Busateri, (414) 438 0400 Guy Schraufnagel, (877) 928 4589
H Wilcox Woodworks Inc., Manassas Burger Boat Company, Manitowoc Wood Design Inc., Fort Atkinson
Daniel Wilcox, (703) 369 3455 Ronald Cleveringa, (920) 686 5117 Lee Moldenhauer, (920) 563 4833
H Winchester Woodworking Corp., Winchester H C.L.S. Custom Laminating Specialists, Green Bay
James Hamilton Jr., (540) 667 1700 Jody Fuller, (920) 434 4266 West Virginia
H Carley Wood Associates, Inc., Madison H Allegheny Restoration & Builders Inc., Morgantown
Vermont Robin Carley, (608) 249 7444 Blair Lee, (304) 594 2570
Amoskeag Woodworking Inc, Colchester Cathedral Builders, Inc., Menomonee Falls H Architectural Wood, LLC, Ronceverte
Kevin Hastings, (802) 860 9588 Jody Giacomini, (262) 250 1985 Bruce Cody, (304) 647 3300
H Central Wisconsin Woodworking, Wausau H Chandler’s Plywood Products, Huntington
Washington Scott Fletcher, (715) 675 4491 Bruce Mosser, (304) 429 1311
H AAA Cabinets & Millwork Inc., Airway Heights H Commercial Casework Supply, Madison Fertig Cabinet Co., Inc., Moorefield
Tim Stewart, (509) 484 7152 Tom Saunders, (608) 276 9202 Robert Fertig, (304) 538 6215
H Cabinet Tech, LLC, Yakima Creative Laminates, Inc., LaCrosse H Mott Manufacturing, LLC, Maxwelton
Rick Stilley, (509) 575 0180 Craig Lyon, (608) 783 5575, ext. 222 Doug Walton, (304) 497 2115
Commercial CabinetWorks, Ridgefield H DeLeers Millwork, Inc., Green Bay Wilson Quality Millwork, Inc., Elkins
Charles Day, (360) 857 3130, ext. 3 Philip DeLeers, (920) 593 7979 Jerry Yeager, (304) 636 9096
H Custom Craft LLC, Sumner H Discher Architectural Millwork, Oshkosh
Leary Jobe, (253) 826 5450 Bruce Discher, (920) 235 6500 Wyoming
H Custom Source Woodworking, Inc, Olympia Diversified Woodcrafts Inc., Suring H JBD INC., Sheridan
Joe Wadsworth, (360) 491 9365 Greg McClure, (920) 842 2136 Jim Bede, (307) 672 5444
H Genothen Holdings, LLC, Tumwater H Eggers Industries, Two Rivers Pinnacle Cabinet & Millwork, Inc., Cheyenne
Terese Dwinal, (360) 352 3636, ext. 102 Ann Duebner, (920) 793 1351 Jody Malm, (307) 632 7497
In Store Services, Inc., Seattle Elipticon Wood Products, Little Chute
Jeff Graham, (206) 682 3934 Doug Gilbert, (920) 788 9322 Bahrain
H Interior Wood Products, LLC, Olympia Havelock AHI WLL, Manama
H Glenn Rieder, Inc., Milwaukee
Dave Newlean, (360) 352 7273 Jihad Raad, 97317832059
Ann Marie Peterson, (414) 449 2888
Interior Woodworking Specialists, Redmond
Tracey Hepner, (425) 881 1328
Grommes Millwork Inc., Beloit
Thomas Garstecki, (608) 362 8928
Canada: British Columbia
H Nikolai Manufacturing Inc., New Westminister
King Brothers Woodworking Inc., Union Gap Hillcraft of Wisconsin, LLC, Madison Eric Wolf, (604) 525 8495
Don Craig, (509) 453 4683 Forrest Lipke, (608) 221 3220
Seagull Enterprises, Vancouver
M L Fox Construction LLC, Snohomish Joseph A. Interiors, De Pere Jim Taylor, (604) 321 6414, ext. 204
Lori Fox, (425) 397 6965 Thomas DeLeers, (920) 347 5850, ext. 1
H Towne Millwork Ltd., Abbotsford
Master Millwork Inc. , Puyallup H Lange Bros. Woodwork Co, Inc., Milwaukee Greg Hesketh, (604) 850 7738, ext. 102
Cathy Rasmussen, (253) 770 2023 Randy Lange, (414) 466-2226, ext.119
Northwest Millwork, Seattle
Kathy Arnold, (206) 284 6440
Nature-Tech, LLC, Milwaukee
Jay Hollingsworth, (414) 745 5949
Manitoba
Mid Canada Millwork Ltd., Steinbach
O.B. Williams Company, Seattle H O’Keefe Incorporated, River Falls Darryl Friesen, (204) 326 5888
David Wick, (206) 623 2494 Brian Troska, (715) 425 8981
Phoenix Woodwork & Interiors Ltd., Winnipeg
Pearson Millwork, Inc., Arlington H Oshkosh Doors, Oshkosh Tony Hayhurst, (204) 480 8331
Kirsten Ingham, (360) 435 9516 Brad Parks, (920) 233 6161
Ross Display Fixture Co., dba RDwoodworks, Seattle Schulist’s Custom Cabinets Inc., Stevens Point
Stacey Dillon, (253) 507 8301 Gregory Schulist, (715) 341 7728

68 I
designsolutions spring 2013
Nova Scotia Quebec Spain
H Nova Wood Products Ltd., Lunenburg Baillargeon Doors, Inc., St-Ephrem Moinsa, Mostoles (Madrid)
Scott McVittie, (902) 634 4120 Ghislain Jacques, (418) 484 5666 David Tirado, +314.677.55.07.62
Ebenisterie Beaubois, Saint-Georges
Ontario Francois Lacombe, (418) 228 5104 Turkey
CIF Lab Solutions LP, Vaughan H Lambton Doors, Lambton MOB Furniture Interiors Contract, Inc., Istanbul
Vince Occhipinti, (905) 738-5821, ext. 243 Marc Blain, (418) 486 7401, ext. 382 Mengü Saran, 90-212-324-3600
CN Architectural Millwork & Construction, Burnaby Polybois, Inc., Thetford Mines Nergiz Decoration Ltd. Co. Dafadoor, Ankara
Chandra Nair, (604) 299 8715 Luc McCutcheon, (418) 338 4638 Kenan Nergiz, 90-312-398-1103
Doorland 2000, Woodbridge Que-Wood Mouldings, St-Jerome H Papirus Ahsap Dekorasyon, Istanbul, Istanbul
Sergio Granzotto, 905.850.5190 Ext225 Daniel Warnet, (450) 430 0825 Fisun Erman, 90-212-250-3434
H Harring Doors, London
Kelly Vriesema, (519) 644 2444 China United Arab Emirates
H Cauval Sammy Wood Products Ltd. , Wan chai Hong Kong Al Mashrabia Furniture Industry, Dubai
Prince Edward Island Fai Wong, 852-25024164
Sunil Kuruuilla, 00971-4-3330883
Chandlers Cabinets & Millwork, Charlottetown Haseeb Rasoul FZC, Sharjah
Mark Steele, 902-367-7750, ext. 104 H Dongguan Sundart Timber Products Co., Hong Kong Jacey Groenewald, +971 6 526 0881
Raymond Lai, 86-769-87712640
JC Maclean International FZCO, Dubai
Pedro D’Sousa, 0097148811811
Kuwait
Nijaracraft Furniture & Joinery, Sabhan Industrial Area
Mohamed Al Sager, 96524719884
I n d e X to
Adve rt I s e rs Mexico
Grupo Inmobiliario Solarix SA de CV, Mexico City
David Brandon, 52-552-488-2771
Adservco .................................... 54
M. Bohlke Veneer .......................... 1 Philippines
Brooklyn Hardware ....................... 7 Crimson Group, Inc., Makati City
ChemCraft .................................... 2 Enrique Pelaez, (632) 552 1731

Eagle Mouldings .......................... 46

Quatar
Etemplate ................................... 27
Almisned Trading and Joinery, Doha
Federated Ins...........Inside Front Cover Alwaleed Almisned, +97444568637
Flexible Materials .........................35 Metrica Interior W.L.L., Doha
Gemini Coatings .......................... 27 Hassan Khan, 97444151999

Hafele ........................................ 46 Al-MuwakabaWoodenFurniture&IndustriesFactoryCo.,Jeddah

Hasyim Noor, 96626092220
IMA Schelling ................................ 5
INEX - Int’l. Expertise for Wood Ind. Ltd., Jeddah
Imperial Woodworking .................18 Ridwan Hubaiti, 96626352213
Monarch Metal .............................4
Pollmeier.....................................35 Saudi Arabia
Precision Veneer.......................... 45 Crestwood Wood Works Co, LLC, Al Khobar
Abdulrahman Aujan, 966-03-857-5510
QCP ..................... Inside Back Cover
Lamar, Riyadh
Roseburg Forest Products ............. 46 Mohammad Zakariya Khabbazeh, 96612656555
SCM Group.................................. 48 Saudi Binladin Group Production Center, Jeddah
Sherwin Williams ........................ 45 Syed Abrar Ahmed, 966.2.2250.173
States Industries .......................... 54 Adada & Kabbani, Makkah
Yahya Adada, +966 2 5205555
Star Mouldings ..............................9
M. Binladin Co. (Binladin Woodwork Factory), Jiddah
Stiles Machinery .............Back Cover
Zafer Karaman, 966-50-536-3575
Valspar ........................................ 5
Waco Composites ........................ 45 South Korea
White River Hardwoods ................. 5 I-Des Interior & Furniture Inc, Incheon
Byung Sam Min, 82-032-578-0102
Zepsa Stairs .................................35

spring 2013 I designsolutions 69

show off.

Designing in wood produces beautiful,

elegant and often exotic results. Results you
want to share with the rest of the world. Put
your designs in the limelight...by publishing
them in DESIGN SOLUTIONS.
This award-winning publication features
custom architectural woodwork in a variety
of applications. Distributed to your peers
throughout North America, DESIGN SOLUTIONS
provides ideas and techniques to readers
who appreciate the grandeur of architectural
woodwork
To submit a project for publication:
1. Complete our convenient
submission forms.
2. Submit forms with color photography.

We’ll do the rest. However, the woodwork

must be produced by a member firm of the
Architectural Woodwork Institute. Projects of
any size will be considered.
Submissions can be made at any time.
Forms are available online at awinet.org
or by request through AWI headquarters:

Telephone: 571-323-3636
Fax: 571-323-3630

70 I
designsolutions spring 2013
AWI Supplier Members Firms marked with a green dot (●)
are sponsors and advertisers.

4 Production Drawings Inc. Brown Wood Products Company DLI Incorporated ● Häfele America Co.
(450) 434 7588 4-production-drawings.com (800) 328 5858 brownwoodinc.com (561) 586 1118 dliincorporated.com (336) 434 2322 hafele.com/us

9Wood, Inc. C T Finishing, Inc. Dooge Veneers, Inc Haley Brothers, Inc.
(888) 767 9990 9wood.com (909) 629 7402 ctfinishing.com (616) 698 6450 doogeveneers.com 714-670-2112 haleybros.com

ABET Laminati CabParts, Inc. Drawer Connection, Inc Hardline Corporation

(201) 541 0700 abetlaminati.com (970) 241 7682 cabparts.com 480-917-4887 drawerconnection.com (231) 276 0170 hardlinecorp.com

Accuride International Camger Coatings Systems, Inc. Duratherm Window Corporation Hardware Resources
(562) 903 0356 accuride.com (508) 528 5787 camger.com (207) 872 5558 durathermwindow.com (800) 463 0660 hardwareresources.com

● Adservco Group SP. Z O.O. Celanese Dynamic Windows and Doors Heidler Hardwood Lumber Co.
1148126374849 adservco.pl (540) 921 6428 celanese.com (604) 864 8200 dynamicwindows.com (773) 847 7444 heidlerhardwood.com

Algoma Hardwoods Chabros Timber Trading LLC E.B. Bradley Co Heitink Plywood Technologies, Inc.
(920) 487 5221 algomahardwoods.com 97142672280 chabros.com (323) 585 9201 ebbradley.com (812) 336 6436 heitink.us

Aljoe Woodwork Consultants Charles F. Shiels & Company ● Eagle Mouldings Herzog Veneers, Inc.
(917) 520 1100 (513) 241 0239 shielslumber.com (763) 493 2995 eagle-aluminum.com (336) 434 4053 veneeronline.com

Alliance Millsoft ● Chemcraft Elkwood Construction Services Hettich America L.P.

(800) 721 2189 alliancemillsoft.com (336) 841 5111 chemcraft.com (717) 354 6618 elkwoodconstruction.com (770) 887 3733 hettich.com

American Laminates, Inc Clark’s Hardwood Lumber Company ● ETemplate Systems Hi Tech Veneer
(209) 869 2536 americanlaminates.com (713) 862 6628 clarkshardwood.com (919) 676 2244 etemplatesystem.com (812) 284 9775 hitechveneer.com

Ampco Products, Inc. Columbia Forest Products Inc. Eurosoft, Inc. Holden & Flynn Universal Contr. Inc.
(305) 821 5700 ampco.com (503) 224 5300 columbiaforestproducts. (919) 468 3003 eurosoftinc.com (917) 256 0329
com
Architectural Components Group Inc ● Federated Insurance Hood Distribution
(417) 869 6777 acgiwood.com Contact Industries (800) 533 0472 federatedinsurance.com (601) 296 4826 hooddistribution.com
(800) 345 2232 contactind.com
Architectural Finishing Solution, Inc Fixture-Pro, Inc. Horizon Wood Products, Inc.
(714) 630 4030 afinishing.com Coralwood Design (707) 545 3901 fixture-pro.com (814) 772 1651 horizonwood.com
(305) 793 0286
Architectural Fixtures, Inc. FJM Security Products ● IMA/Schelling
(847) 562 9944 af-inc.com Cornerstone Interior Woodworking (800) 654 1786 fjmsecurity.com (919) 246 0350 imaamerica.com
(260) 357 0754 cornerstoneinteriorwood.com
Architectural Forest Products Flex Trim by Carter Millwork Indiana Architectural Plywood
(920) 793 4404 afpinc.net Crider’s Finishing (800) 861 0734 flextrim.com (317) 878 4822 iaplywood.com
(703) 661 6520 cridersfinishing.com
Arcways, Inc. ● Flexible Materials, Inc. Install Solutions International
(920) 725 2667 arcways.com Crown Column & Millwork (812) 280 7000 flexwood.com (816) 569 4300 installsolutionskc.com
(256) 538 1949 crowncolumn.com
Art for Everyday, Inc. Florida Stair Works & Carpentry LLC Interwood Forest Products, Inc.
(416) 645 5120 afe-inc.com Crown Veneer Corp. (239) 489 1177 floridastair.com (502) 633 0017 ifpveneer.com
(610) 869 8771 crownveneer.com
Atlantic Plywood Corporation FormWood Industries, Inc. ISEC Inc.
(781) 933 3830 atlanticplywood.com Crows Nest Software, Inc. (812) 284 3676 formwood.com (303) 790 1444 isecinc.com
(360) 453 7285 crowsnestsoftware.com
Baillie Lumber Company Fulterer USA J Borinstein Inc
(716) 649 2850 baillie.com Custom Caseworks (336) 431 4646 fultererusa.com (317) 322 9191
(320) 259 5190 customcaseworks.com
Bath/Kitchen & Tile Supply Co. Garrison Woodcrafters JD James, Inc.
(302) 992 9220 bathkitchenandtile.com Custom Crafted Door (770) 373 4935 garrisonwoodcrafters.com (850) 385 3234 jdjamescorp.com
(309) 527 5075
Biesse America, Inc. ● Gemini Coatings, Inc. JKL Machinery
(704) 357 3131 biesseamerica.com Custom Plywood Inc. (405) 262 5710 gemini-coatings.com (810) 623 6538 JKLMachinery.com
(812) 944 7300
Blacks Outsourcing, Inc. Gleeson Construction Inc. Kearns & Co Arch. Building Products
(262) 662 0397 blacksoutsourcing.com Darlington Veneer Co., Inc. (440) 247 8775 gleesonconstruction.com (603) 232 4480 kearnsplywood.com
(843) 393 3861 darlingtonveneer.com
Blum Inc. Global Millwork Services Kerfkore Company
(704) 827 1345 blum.com Devereaux Sawmill Inc. (732) 733 2027 globalmillworks.com (912) 264 6496 kerfkore.com
(989) 593 2552 devereauxsawmill.com
Brendel Restoration Graham Division of ASSA ABLOY, Inc. Klingspor Abrasives, Inc.
(410) 489 5868 brendelrestoration.com Dimension Plywood, Inc. (641) 423 2444 grahamdoors.com (828) 322 3030
(812) 944 6491 dimensionhardwoods.com
● Brooklyn Hardware LLC Grass America, Inc. Lamin-Art
(503) 232 1171 panelclip.com Diversified Educational Systems (336) 996 4041 grassusa.com (847) 860 4300 laminart.com
(540) 687 7060 des.com
Brookside Veneers, Ltd. Greenline Industries Inc. Latta Construction-Texas, LLC
(609) 409 1311 veneers.com Dixie Plywood & Lumber Companies (843) 846 4648 greenlineforest.com (214) 596 1744 lattaconstruction.com
(912) 447 7090 dixieply.com

spring 2013 I designsolutions 71

 Lenmar Products Inc Numatic Finishing Corporation Salice America, Inc. Tradesoft, Inc.
(386) 428 6461 lenmar-coatings.com (253) 939 2391 (704) 841 7810 saliceamerica.com (770) 579 9096 tradesoftinc.com

Leuco Tool Corporation Ohio Valley Door Corporation Saunders Wood Specialties Trespa North America
(770) 459 5784 leucotool.com (812) 945 5285 ohiovalleydoor.com (715) 762 3916 saunderswood.com (800) 487 3772 trespa.com

Lewis Lumber Products, Inc. Olam Wood Products SCI Arch. Woodwork Installation Upstate Door, Inc.
(570) 584 4460 lewislp.com (910) 383 2578 (954) 247 9601 sciwoodwork.com (585) 786 3880 upstatedoor.com

Louis and Company Olympus Lock Inc. ● SCM Group North America ● Valspar Wood Distribution
(714) 529 1771 louisandcompany.com (206) 362 3290 olympus-lock.com (770) 813 8818 scmgroup-usa.com (336) 802 4768 valsparwood.com

Lynden Door, Inc. Oregon Door Company SD Verret Company Van Hout USA
(360) 354 5676 lyndendoor.com (541) 679 6791 oregondoor.com (804) 323 1445 sd-verret.com (812) 282 9663

● M. Bohlke Veneer Corporation Osborne Wood Products Inc. Select Door Vance Publishing Corp.
(513) 874 4400 mbohlkeveneer.com (706) 886 1065 osbornewood.com (800) 535-9335 selectcustomdoor.com (847) 634 4365 WoodworkingNetwork.com

● M.L. Campbell Company Pacific Architectural Wood Products Inc. ● Sherwin Williams Company Vaughn Woodwork Consultants
(216) 515 7784 mlcampbell.com (503) 284 0024 (216) 566 1899 sherwin-williams.com (508) 695 8193 woody-vaughn.com

Marwood Inc. Paragon Enterprises, Inc. Shows Leary Millwork Management, LLC Veneer One
(812) 288 8344 marwoodveneer.com (865) 212 4170 millworkcadcam.com (518) 482 3222 showsleary.com (516) 536 6480 veneer1.com

Materials Inc. PA Lumbermens Mutual Insurance Co. Sieling & Jones Inc. Veneer Products, Ltd.
(201) 968 0101 materialsinconline.com (800) 752 1895 plmins.com (717) 235 7931 sielingandjones.com (718) 409 2662 vplveneers.com

Meridian Construction Services, Inc. People Logic Software Corp. Sing Square Log Homes, Inc. Veneer Technologies, Inc.
(216) 447 1518 (250) 475 1392 peoplelogicsoftware.com (360) 495 3577 singcore.com (252) 223 5600 veneertech.com

Merrill Lynch Ply-Tech Corporation Smartware LLC Vicwood Group

(719) 630 6060 (270) 678 2941 plytechcorp.com (919) 697 0104 (604) 738 4588 acfairbankconsulting.ca/
vicwood.htm
Microvellum Inc. ● Pollmeier, Inc. Somerset Door & Column Company
(541) 664 1625 microvellum.com (503) 452 5800 pollmeier.com (814) 444 9427 doorandcolumn.com VT Industries, Inc.
(712) 368 4381 vtindustries.com
Miller Veneers ● Precision Glass Bending Corporation Spiegel Woodworks Inc.
(317) 638 2326 millerveneers.com (479) 996 8065 e-bentglass.com (845) 336 8090 sawmoulding.com ● Waco Composites I, LTD
(254) 752 3266 armorcore.com
Mirror Reflections, Inc. Precision Veneer Products ● Star Moulding & Trim Company
(801) 451 5987 mirror-reflections.com (519) 758 0960 (708) 458 1040 starmoulding.com Waterhout Construction
(314) 781 1178
Mohawk Finishing Products Pre-Hung Door Inc. ● States Industries LLC.
(828) 261 0325 mohawk-finishing.com (651) 454 2993 prehungdoorsinc.com (541) 688 7871 statesind.com WEINIG
(704) 799 0100 weinigusa.com
Mohawk Flush Doors Prime Estimating & Software Services ● Stiles Machinery, Inc.
(570) 473 3557 mohawkdoors.com (239) 213 1237 millworkestimators.com (616) 698 7500 stilesmachinery.com Western Dovetail Inc.
(707) 556 3683 drawer.com
● Monarch Metal Fabrication Inc. Pro-Ply Custom Plywood Inc. Summit Hill
(631) 563 8967 monarchmetal.com (905) 564 2327 proply.com (952) 224 7075 summithillinc.com ● White River Hardwoods-Woodworks
(479) 442 6986 whiteriver.com
Moulding and Millwork Quality Cabinet & Fixture Co. Sun Dor Co, Inc.
(623) 326 0121 mouldingandmillwork.com (619) 266 1011 (585) 786 0341 sundorco.com Whittelsey Sales, LLC
(513) 271 9600
Nationwide Fixture Installations, Inc. Raster Engineers Supa Doors Inc
(763) 540 0351 nfi-usa.com (312) 775 2805 rasterengineers.com (210) 698 8500 supadoor.com Whittelsey Wood Products
(305) 621 4242
Navy Island, Inc. Renaissance Specialty Veneer Products Superfici America, Inc.
(651) 451 4454 navyisland.com (812) 375 1178 rsvpveneer.com (704) 875 8751 superficiamerica.com Woodtech Trading Company
(406) 892 5140 woodtechdoor.com
Newman Lumber Co Resource Engineering, Inc. Sweetwater Lumber & Land Co., Inc.
(228) 832 1899 newmanlumber.com (352) 332-0767 resourceengineering.com (770) 941 4932 sweetwaterlumber.com WTC Co., Ltd
(822) 574 5530 wtckorea.com
Newtech Installation USA Inc. Rex Lumber Company Talbert Arc Paneling and Doors
(860) 344 1261 newtechinstallation.com (978) 263 0055 rexlumber.com (714) 671 9700 talbertusa.com Wyatt Duffin Construction Corp
(512) 382 9796 wdctexas.com
Nightingale Architectural Doors Rockwood Door & Millwork Tesko Custom Metal
(972) 878 1133 nightingaledoors.com (330) 893 2392 rockwooddoor.com (708) 452 0045 teskoenterprises.com Yoder Lumber Co Inc.
(330) 893 3121 yoderlumber.com
Noreaster Installations Inc. ● Roseburg Forest Products Company The Maiman Company
(860) 376 0555 noreaster-installations.com (541) 679 2728 roseburg.com (417) 862 0681 maiman.com

Northeast Interior Systems, Inc. Roy Metal Products The Veneer Source LLC
(401) 721 5600 neis.cc (418) 259 2711 roymetalinc.com (303) 658 0530 theveneersource.com

Northway Industries Inc. Rudd Company Inc. The Wood Gallery Inc.
(570) 837 1564 northwayind.com (800) 444 7833 ruddcompany.com (972) 869 9161 woodgallery.biz

Northwood Machine Mfg. Co. S & S Craftsmen, Inc. Thruway Hardwood & Plywood Corp.
(502) 267 5504 northwoodmachine.com (813) 247 4429 s-scraftsmen.com (716) 893 9663 thruwayhardwood.com

NueMedia, LLC S. J. Morse Company TMI-TX Services, LLC

(608) 873 6268 nuemediallc.net (304) 856 3423 sjmorse.com (281) 575 0212

72 I
designsolutions spring 2013
 QCP puts you on solid ground.

Woodwork: Mark Richey Woodworking

Photography: Warren Jagger Wood
Selection Makes Offices Look Very

Impeccable. It’s tion, finishing and installa- Because the AWI Quality Certifica-
the foundation of tion.You can ask for a QCP tion Program goes to the mat for
your work. That’s Inspection and Report. So the design professional, impeccably.
why when starting you never feel floored. If the
a custom woodwork inspection shows a lack of compli-
project, you need to register it ance, problems are addressed.
with AWI’s Quality Certification Call 800-449-8811 or go to
Program. After all, it should com- awiqcp.org to receive a Project
ply with the Architectural Woodwork Number to include on contract
www.awiqcp.org The Quality Certification Program is administered
by the AWI Quality Certification Corporation
Standards (AWS) during fabrica- documents.
I didn’t know...
Stiles could help simplify my production process.
Whether you’re a studio craftsman or a large manufacturer, Stiles can help you work faster and more efficiently.
We offer an integrative selection of technology and services for any production application. Talk with us about
how we can make your work better.

For more information, contact Stephan Waltman at 616.698.7500 or [email protected].

Or visit us at www.stilesmachinery.com.