Routine Maintenance & Performance

Mgm
Contents
8.1 Specifications for High-Risk Operations
8.1.1 Risky CGP Commands
8.1.2 Risky SBC and MGW Commands
8.1.3 Risky MSC Server Commands
8.2 Performance Management Description
8.2.1 Performance Management Principles
8.2.2 Logging In to the Performance Management System
8.2.3 GUIs
8.2.4 Measurement Management
8.2.5 Querying Measurement Results
8.2.6 Exporting Measurement Results
8.2.7 Setting Thresholds
8.2.8 Customizing Measurement Entities
8.3 KPI Monitoring
8.3.1 KPI Monitoring
8.3.2 Logging In to the Performance Managment System
8.3.3 Real-Time Monitoring
8.3.4 Monitoring History

8.1 Specifications for High-Risk

Operations
Risky CGP Commands
Risky SBC and MGW Commands
Risky MSC Server Commands

Parent Topic: Routine Maintenance

8.1.1 Risky CGP Commands

and Table 2 list risky commands on the CGP. Risky commands are classified into
Table 1
the following types:
 High-risk commands: Inappropriate use of such commands may cause global
service failures or loss of a large number of CDRs.
 Medium-risk commands: Inappropriate use of such commands may cause
interruption of certain services (such as services between the ME and a specific
office) or loss of a small number of CDRs or affect operation and maintenance on
all modules.
 Low-risk commands: Inappropriate use of such commands may cause certain
services to fail or certain KPIs to decrease or affect operation and maintenance on
certain modules.
 Commands not listed here do not affect services.

Table 1 High-risk CGP commands

Commands Risk Risks Preventive Measures

Level

Command STP ME High After this  Consult Huawei

for stopping command is technical support
a managed executed, all engineers before
element (ME) services on the running this
ME will be command.
Command RST ME
interrupted.  Note the
for resetting following when
an ME running these
RMV ME
commands:
Command
 Run these
for removing
an ME commands
during off-
peak hours.
 Analyze
whether the
interconnected
NEs will be
aware of the
removal or
stopping of the
MEs. Analyze
the data and
capacity of the
redundancy
NEs to
determine
whether they
can take over
services.
Redirect
services to the
Table 1 High-risk CGP commands

Commands Risk Risks Preventive Measures

Level

redundancy
NEs or take
other
alternative
solutions.
Organize a
review on the
solutions
before
implementing
them.
 If the MEs
must be added
back, verify
the scripts for
adding back
the MEs in lab
environment.
 After running
these
commands,
conduct tests
to verify that
services are
successful.

Command FIN UPGWATCH High After this  Consult Huawei

for ending command is technical support
the executed, all MEs engineers before
observation cannot be rolled running this
period back to their command.
source versions.  Do not run this
command during
the upgrade or
rollback.
 Ensure that the
following
conditions are
met before
running this
command:
Table 1 High-risk CGP commands

Commands Risk Risks Preventive Measures

Level

 All MEs have

been
upgraded.
 No new alarms
are present.
 Services are
successful
during the
observation
period.

Command SWP WKSP High If this command Consult Huawei

for swapping is executed technical support
workspaces during an engineers before
upgrade, the running this
upgrade may fail. command.
If this command
is executed
during the
observation
period, the
system will
switch over to
the workspace of
the earlier
version.

Command SYN MEVER High Running this Consult Huawei

for command during technical support
synchronizing forcible upgrade engineers before
ME versions or rollback may running this
cause service command.
VMs to reset and
interrupt
services.

Command SND CRCERR High Inappropriate  Consult Huawei

for sending use of this technical support
CRC error command will engineers before
data interrupt running this
services. command.
Table 1 High-risk CGP commands

Commands Risk Risks Preventive Measures

Level

 Note the
following when
running this
command:
 Run this
command only
during off-
peak traffic
hours.
 Run this
command to
send only a
small amount
of data.
 Ensure that
the OMU
database data
is correct
before running
this command.
 Ensure that
services are
successful
after running
this command.

Command SET LOCALPARA High Running this Consult Huawei

for setting command will technical support
local affect user engineers before
parameters experience and running this
system functions. command.

Command MOD SYSCONF High Inappropriate use  Consult Huawei

for modifying of this command technical support
system will interrupt all engineers before
parameter services on the running this
configuration MEs. command.
 Note the
following when
running this
command:
Table 1 High-risk CGP commands

Commands Risk Risks Preventive Measures

Level

 Run this
command only
during off-
peak traffic
hours.
 If you modified
Inner COMM
mode during
system
operation,
reset all the
virtual
machines
(VMs)
(including the
active and
standby OMU
VMs) in the
system;
otherwise, link
failures may
occur because
of incorrect IP
address
configuration.
 If you changed
Maximum
number of
modules
during system
operation, run
FMT in the
MML
Command -
CGP window
and reset
modules on all
MEs.
Otherwise,
data in the
OMU database
Table 1 High-risk CGP commands

Commands Risk Risks Preventive Measures

Level

and that on
the host will
be
inconsistent.

Set SET ARBMDUCFG High Inappropriate Consult Huawei

Distributed use of this technical support
Arbitration command will engineers before
Cluster cause all running this
Switch processes in an command.
availability zone
to switch to the
standby state,
which thereby
interrupts
services.

Reset RST ARBMDU High Inappropriate Consult Huawei

Distributed use of this technical support
Arbitration command will engineers before
Cluster cause all running this
processes in an command.
availability zone
to switch to the
standby state,
which thereby
interrupts
services.

Table 2 Medium-risk CGP commands

Commands Risk Level Risks Preventive Measures

Module- RST MDUTYPE/SWP Medium After these  Exercise caution

related MODULE/RST commands are when deciding
commands MODULE/SET executed, to run this
BAKMODE/SET services on the command.
HAMDU/MOD modules will be  Note the
MODULE interrupted. following when
switching over
Table 2 Medium-risk CGP commands

Commands Risk Level Risks Preventive Measures

or resetting
modules:
 Reset only
one module
at a time and
switch over
only two
modules of
the same
type at a
time.
 Check
whether the
standby
modules are
running
properly
before
performing a
switchover.
 Check
whether the
system is
running
properly
after
performing a
switchover
or reset.

Patch-related ROL PATCH/RMV Medium Running these  When

commands PATCH/DEA commands may specifying
PATCH/ROL cause service parameters in
CPATCH/SYN interruption if these
CPATCH/ACT some parameters commands,
SYSPATCH/ROL are incorrectly follow the
SYSPATCH specified. instructions in
the Patch
Update Guide.
 Roll back,
remove, or
deactivate
Table 2 Medium-risk CGP commands

Commands Risk Level Risks Preventive Measures

patches only
during off-peak
hours.
 Roll back,
remove, or
deactivate
patches on the
WebUI. Contact
Huawei R&D
engineers if
emergency
situations
require
performing
these
operations
using MML
commands.

Commands for SET TZ/SET TIME Medium Incorrect time or Exercise caution
configuring clock settings will when deciding to
time cause charging run this command.
time disorder or
clock
synchronization
failure, leading to
system
breakdown.

Command for SET FTPSVRCFG Medium  After you set Exercise caution
setting an FTP the port when deciding to
server port number of the run this command.
control
channel of an
FTP server, the
UTILITY service
will restart,
which will
affect the FTP
service and
the time check
function.
Table 2 Medium-risk CGP commands

Commands Risk Level Risks Preventive Measures

 Do not set
several port
numbers of
the control
channel of the
FTP within a
short period.
Otherwise, an
active/standby
switchover
may occur.
 After you set
the port
number of the
control
channel of the
FTP server,
you need to
log in to the
LMT again for
the settings to
take effect.
 If you set the
port number
of the control
channel of an
FTP server to a
port in use,
the UTILITY
service cannot
start.

Command for SET FTPPOLICY Medium  After you set Exercise caution
setting FTP the FTP service when deciding to
service security security run this command.
policies policies, the
UTILITY service
will restart,
which will
affect the FTP
service and
Table 2 Medium-risk CGP commands

Commands Risk Level Risks Preventive Measures

the time check

function.
 If Server
authentication
or Client
authentication
is set to PEER
(Verify Peer
Certificate),
but the FTP
server has an
inconsistent
certificate with
the FTP client,
the FTP
connection
fails.
 If Uploaded
files
permission
control is set
to ON (On),
you only have
the owner
permission on
the files and
folders
uploaded to
the OMU
through the
FTP server.
 If The inner
FTP protocol
control is set
to OFF (Off),
operations like
standby OMU
installation,
upgrade
rollback,
patching, and
information
Table 2 Medium-risk CGP commands

Commands Risk Level Risks Preventive Measures

collection may
fail.

Command for LCK ME Medium After this Exercise caution

locking MEs command is when deciding to
executed, run this command.
configuration
commands
cannot be
executed and
service data
cannot be
configured.

Command for IMP MES Medium Running this Exercise caution

importing ME command will when deciding to
data overwrite the ME run this command.
data with the
imported data.

Command for RMV WKSP Medium The upgrade may  Exercise caution
removing a fail or the MEs when deciding
workspace cannot be rolled to run this
back to their command.
source versions.  Run this
command only
after running
UPG ME or CBN
PLANE.

Virtual RST VM/STP Medium Running this Exercise caution

machine (VM)- VM/FMT VM/STR command may when deciding to
related INSTVM cause mismatch run this command.
commands between ME,
board, and
application
types.

Command for SET VNFMINFO Medium Incorrect  Exercise caution

setting data for parameter when deciding
communicating settings may to run this
with the VNFM cause VM command.
maintenance
Table 2 Medium-risk CGP commands

Commands Risk Level Risks Preventive Measures

commands to  When running

become this command,
unavailable. ensure that the
Three parameter
consecutive values in the
incorrect inputs command are
of the VNFC-M correct.
user name or
password will
lock the VNFC-M
account for 30
minutes.

Command for SET CACER Medium Incorrect  Exercise caution

setting the parameter when deciding
VNFM trusted settings may to run this
root certificate cause VM command.
maintenance  When running
commands to this command,
become ensure that a
unavailable. correct VNFM
trusted root
certificate is
entered.

Command for STR OSCRC Medium Running this Exercise caution

checking the command may when deciding to
operating affect the system run this command.
system (OS) behavior.

Command for SWP OMU Medium During the Exercise caution

switching over switchover, the when deciding to
the active and OMU services are run this command.
standby OMUs unavailable,
thereby causing
an interruption
in the present
maintenance
services. In
normal cases, the
switchover takes
Table 2 Medium-risk CGP commands

Commands Risk Level Risks Preventive Measures

about 30
seconds.

Command for RST OMU Medium During the OMU Exercise caution
resetting the reset, the OMU when deciding to
OMU services are run this command.
unavailable,
thereby causing
an interruption
in the present
maintenance
services. In
normal cases, the
resetting takes
about 1 minute.

Command for SET OMUOMIP Medium  The floating IP Exercise caution

configuring the address of the when deciding to
floating and OMU board is run this command.
physical IP used to
addressees of communicate
the OMU with other
entities. If the
floating IP
address is
modified,
certain
connections
between the
client and the
OMU may be
interrupted.
 If the physical
IP address of
the OMU is
changed,
some
functions may
become
unavailable.
 If the IP
addresses are
Table 2 Medium-risk CGP commands

Commands Risk Level Risks Preventive Measures

set incorrectly,
IP address
conflicts may
occur and the
OMU
functions may
be affected.
As a result,
the OMU
cannot
provide
services
normally.

Virtual SYN VMSFT/SYN Medium Running these Exercise caution

machine (VM) VMSFTUPG commands may when deciding to
software- synchronize the run this command.
related application's
commands software
configuration to
the VM and
update the
software
versions installed
on the VM.

Command for SET IPSCONF Medium Running this Exercise caution

configuring command may when deciding to
and managing cause service run this command.
IP security interruption.

Command for ADD ACLRULE/ADD Medium Running these Exercise caution

configuring ACLFILTER commands may when deciding to
and managing cause service run this command.
ACL rules interruption.

Command for EXC SUBSQL Medium Inappropriate Exercise caution

operating the use of this when deciding to
UDB in- command may run this command.
memory result in incorrect
database data in the UDB
in-memory
database.
Table 2 Medium-risk CGP commands

Commands Risk Level Risks Preventive Measures

Commands for SET CHRKEY/SET Medium Inappropriate use Exercise caution

managing CHR CHRTRMCFG of these when deciding to
transmission commands will run these
cause failures to commands.
transfer CHRs
and loss of a
large number of
CHRs.

Command for SET SSLPRTL Medium The execution of Exercise caution

set SSL this command when deciding to
protocol state may cause some run this command.
modules on the
OMU to restart.
During the
restart, the
operation and
maintenance of
the system will
be interrupted.

Command for SET SSLCIPHER Medium The execution of Exercise caution

set SSL cipher this command when deciding to
state may cause some run this command.
modules on the
OMU to restart.
During the
restart, the
operation and
maintenance of
the system will
be interrupted.

Command for SET CONNTYPE Medium The execution of Exercise caution

setting the this command when deciding to
connection may cause some run this command.
type modules on the
OMU to restart.
During the
restart, the
operation and
maintenance of
Table 2 Medium-risk CGP commands

Commands Risk Level Risks Preventive Measures

the system will

be interrupted.

Command for SET WEBAUTHFUNC Medium The execution of Exercise caution

setting web this command when deciding to
peer may interrupt the run this command.
authentication connection with
switch the OMU server
from the WebUI.

Command for RMV GATEWAY Medium After this Exercise caution

removing a command is when deciding to
gateway executed, the run this command.
OMU client in
the destination
network segment
will be
disconnected
from the OMU
server and O&M
operations will
be interrupted.

Command for SET FTPPRTL Medium If the FTP Exercise caution

setting the FTP protocol type or when deciding to
type and port port is set run this command.
differently
between the FTP
client and FTP
server, FTP
connections
cannot be
established.

Command for LOD MMLCONF Medium Running this  Exercise caution

loading MML command may when deciding
script files for cause changes to to run this
MEs to the deployment or command.
OMU scale-in/out  Run this
procedures. command after
the deployment
or scale-in/out
Table 2 Medium-risk CGP commands

Commands Risk Level Risks Preventive Measures

tasks are
complete.

Command for SET VMIMGSWITCH Medium After this Exercise caution

setting the VM command is when deciding to
recreation executed, VM run this command.
method data will be lost
during VM
rebuilding.

Command for UPT SYSKEY Medium Running this  Exercise caution

updating a command may when deciding
system key cause service to run this
exceptions. command.
 Before running
this command,
ensure that the
system is
running
properly
without any
resource
abnormality.
 Do not perform
critical
operations,
such as
upgrades,
backup and
restoration, and
loading patches,
before or
during
execution of
this command.
 Before and
after the
command is
run, run BKP SYS
and use the FTP
service to
download the
Table 2 Medium-risk CGP commands

Commands Risk Level Risks Preventive Measures

backup package
to the local PC
in case of
system failures.

Command for RST VNFCMVM Medium Run this Exercise caution

resetting a VM command on a when deciding to
VNFC-M: run this command.
 If the active
OMU is reset,
the system
maintenance
terminal will
be
disconnected.
 Running this
command will
reset the VM
and RUs on
the VNFC
corresponding
to the VM. In
addition,
services on
the VM will
become
unavailable.
Do not run this
command to
manually reset a
VM if the disk
array is faulty
because running
this command
may cause
system start
failure.

Reclaim VNFC UAS VNFCVM Medium  Removing a Exercise caution

VM VM-VNFC when deciding to
binding will run this command.
cause the
Table 2 Medium-risk CGP commands

Commands Risk Level Risks Preventive Measures

VNFC
functions to
be unavailable
on this VM
and services
to be
interrupted.
 This VM will
be reclaimed
by the system
if it is not used
by other
VNFCs.

Command for ROL MMLCONF Medium Running this  Exercise caution

rolling back command may when deciding
MML script cause changes to to run this
files for MEs to deployment or command.
the OMU scale-in/out  Run this
procedures. command after
the deployment
or scale-in/out
tasks are
complete.

Command for ROL DEPLOYTASK Medium Running this  Exercise caution

rolling back a command may when deciding
failed cause changes to to run this
deployment the initial or command.
task incremental  The command
deployment can be executed
procedures. only for VNFs
whose initial or
incremental
deployment
tasks failed.

Command for LBA OMUCON Medium Running this Exercise caution

balancing loads command may when deciding to
among OMUs cause service run this command.
exceptions.
Table 2 Medium-risk CGP commands

Commands Risk Level Risks Preventive Measures

Command for SET Medium Incorrect Exercise caution

VNFCMRESTINFO
setting data for parameter when deciding to
communicating settings may run this command.
with the VNFC- cause VM
M maintenance
commands to
become
unavailable.
Three
consecutive
incorrect inputs
of the VNFC-M
user name or
password will
lock the VNFC-M
account for 30
minutes.

Command for RST NE Medium  After this Exercise caution

resetting a command is when deciding to
System run on a VNFC- run this command.
M, all VMs on
the VNFC-M
and all RUs on
VNFCs are
reset.
 The reset does
not cause
configuration
data to be lost,
but services
running on the
VNFC are
interrupted
during the
reset.

Activate ACT PACKAGE Medium If the loaded Exercise caution

Software software package when deciding to
Package has the basic run this command.
version or cold
patch, this
Table 2 Medium-risk CGP commands

Commands Risk Level Risks Preventive Measures

operation will
restart the
system. If the
software package
is activated only
on the VNFC-M or
on a VNFC, the
VNF version
inconsistency will
occur. As a
result, services
may fail to run
normally.

Perform SWP VNFCMOMU Medium Misoperations Exercise caution

Master/Slave may adversely when deciding to
OMU affect services. run this command.
Switchover Run the
command in off-
peak hours under
the guidance of
Huawei technical
support.

Set PBUF Trace SET MSSPBUFTRACE Medium If the PBUF track Exercise caution
Switch recording when deciding to
function is run this command.
enabled, the
system collects
running
information,
decreasing
forwarding plane
performance.
This function is
disabled
automatically
after a specified
timer expires,
and then the
forwarding plane
Table 2 Medium-risk CGP commands

Commands Risk Level Risks Preventive Measures

performance is
restored.

Activate GUEST ACT GUESTOS Medium After a guest OS Exercise caution

OS Package is activated, some when deciding to
VMs will be re- run this command.
created, which
affects services.

Set PBUF SET MSSPBUFREUSE Medium If the PBUF reuse Exercise caution
Reuse Check detection when deciding to
Switch function is run this command.
enabled, the
system collects
running
information,
decreasing
forwarding plane
performance.
This function is
disabled
automatically 24
hours after the
function is
enabled, and
then the
forwarding plane
performance is
restored.

Set Restoration SET RSTMODE Medium The MEs will be Exercise caution
Mode restored using when deciding to
the backup run this command.
software
packages after
the restoration
mode is enabled.
Disable this mode
after the MEs are
restored.
Otherwise,
subsequent ME
Table 2 Medium-risk CGP commands

Commands Risk Level Risks Preventive Measures

deployment will
fail.

Send Table SND SPD Medium The CPU usage  Exercise caution
Data may increase when deciding
sharply if the to run this
data volume in command.
the table is large.  Note the
following when
running this
command:
 Run this
command
only during
off-peak
traffic hours.
 Run this
command to
send only a
small
amount of
data.
 Ensure that
the OMU
database
data is
correct
before
running this
command.
 Ensure that
services are
successful
after running
this
command.

Resend SND USD Medium The CPU usage Exercise caution

Timeout Data may increase when deciding to
sharply if the run this command.
data volume in
the table is large.
Table 2 Medium-risk CGP commands

Commands Risk Level Risks Preventive Measures

Modify SOAP MOD SOAPPWD Medium Changing the  Exercise caution

Password SOAP password when deciding
may disconnect to run this
the peer (for command.
example, the  Ensure that the
EMS) from the peer supports
OMU over the the SOAP
SOAP interface. password
change and
change the
password on
the peer
accordingly.

Command for INS APPPATCH Medium This command is Exercise caution

installing an used to install a when deciding to
application software patch run this command.
patch package. If the
patch package
contains a cold
patch, this
operation will
restart the
system.

Command for RMV APPPATCH Medium Running this Exercise caution

uninstalling an command will when deciding to
application restart the run this command.
patch system if the
patch package
contains a cold
patch. The patch
functions will be
unavailable if the
patch is
incorrectly
removed.

Command for RST Medium Running this Exercise caution

PAESERVICEPROCESS
restarting the command will when deciding to
PAE service restart the PAE run this command.
process service process
Table 2 Medium-risk CGP commands

Commands Risk Level Risks Preventive Measures

and interrupt
services.

Command for STP MODULE Low After these  Exercise caution

stopping a commands are when deciding
module executed, to run this
services on the command.
modules will be  Note the
interrupted. following when
stopping
modules:
 Running of
this
command
will cause
service
interruption
on modules.

Command for RMV SNMPCLT Low After the third- Exercise caution
removing a party SNMP when deciding to
third-party device is run this command.
SNMP device removed, the
OMU server will
no longer report
alarms to the
third-party SNMP
device.

Command for SET PMPLUG Low If this command Exercise caution

setting the PM is used when deciding to
plug-in inappropriately, run this command.
the ME
performance
measurement
function will
become
unavailable.

Activate ACT SYSLOG Low The CPU usage Exercise caution

System Log may fluctuate when deciding to
Level greatly when this run this command.
 Table 2 Medium-risk CGP commands

Commands Risk Level Risks Preventive Measures

command is
executed, which
may interrupt
services.

Modify MOD MAXT Low Running this  Exercise caution

Maximum command will when deciding
Number of cause data to run this
Tuples inconsistency command.
between the  After running
OMU database this command,
and VMs. run FMT and
reset the PMU
process for the
modification to
take effect.

Parent Topic: Specifications for High-Risk Operations

8.1.2 Risky SBC and MGW Commands

lists the risky MML commands on the CloudSE2980. Running any of the listed
Table 1
commands may result in service interruption. Exercise caution when running the
commands.

 Only maintenance engineers are allowed to run these MML commands.

 Before running any MOD command, run the corresponding LST command to view
and record the existing configuration. If the modification fails, restore the original
configuration and contact Huawei technical support engineers.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

This command is
used in certain
scenarios and has
an adverse impact
Check whether the
on the system.
Remove operation is feasible
RMV MODULE High Operations such as
Module before you run this
module migration
command.
and switchovers
cause service
interruption and
CDR anomalies.

This command is
used in certain
scenarios and has
an adverse impact
Check whether the
on the system.
Modify operation is feasible
MOD MODULE High Operations such as
Module before you run this
module migration
command.
and switchovers
cause service
interruption and
CDR anomalies.

SET MODULE Set Module High This command is Check whether the
used in certain operation is feasible
scenarios and has before you run this
an adverse impact command.
on the system.
Operations such as
module migration
and switchovers
cause service
interruption and
CDR anomalies.

Deleting a static
SIP link may result Exercise caution when
Remove SIP
RMV SIPSLNK High in call running this
Static Link
establishment command.
failures.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

Modifying a static
SIP link may result Exercise caution when
Modify SIP
MOD SIPSLNK High in call running this
Static Link
establishment command.
failures.

Deactivating a link
results in link
disconnection. If
only one link is
available between
the CloudSE2980 Confirm with Huawei
and peer device, technical support
Deact SIP
DEA SIPSLNK High deactivating the engineers before
Static Link
link disconnects running this
the CloudSE2980 command.
from the peer
device, which may
cause call
establishment
failures.

SIP link statistics

Exercise caution when
Clear SIP may be lost after
CLR SIPSLNK Low running this
Static Link this command is
command.
executed.

This command is
intended for use
Deleting an ABCF during data
Remove A- results in system commissioning in site
RMV ABCF High
BCF Entity errors and service deployment. Do not
unavailability. use this command
during routine
maintenance.

Changing Host This command is

name of an ABCF intended for use
Modify A- results in license during data
MOD ABCF High
BCF Entity revocation and commissioning in site
service deployment. Do not
unavailability. use this command
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

during routine
maintenance.

This command is
intended for use
Deleting an IBCF during data
results in system commissioning in site
RMV IBCF Remove IBCF High
errors and service deployment. Do not
unavailability. use this command
during routine
maintenance.

This command is
Changing Host intended for use
name of an IBCF during data
results in license commissioning in site
MOD IBCF Modify IBCF High
revocation and deployment. Do not
function use this command
unavailability. during routine
maintenance.

Running this
command prevents
the IBCF from
processing new
access services.
After this
Exercise caution when
Mediu command is
BLK IBCF Block IBCF running this
m executed, the IBCF
command.
does not initiate
OPTIONS requests
but the IBCF is still
available so that
ongoing services
can be processed.

This command is
Deleting a BGF intended for use
Remove BGF
results in system during data
RMV BGF Function High
errors and service commissioning in site
Entity
unavailability. deployment. Do not
use this command
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

during routine
maintenance.

Modifying ABCF SIP

trunk groups may
Modify SIP Exercise caution when
result in
MOD ASIPTG Trunk Group High running this
unavailability of
of A-BCF command.
registration and
call services.

This command is
used to block a
specified trunk
group during
commissioning or
maintenance. Once
Block SIP a trunk group is
To unblock a trunk
BLK ASIPTG Trunk Group High blocked, all
group, run UBL ASIPTG.
of A-BCF incoming calls from
the trunk group are
rejected and this
trunk group is not
selected to route
outgoing
messages.

If an IBCF SIP trunk

group is being
referenced by an IBCF
office direction, the
IBCF SIP trunk group
Deleting an IBCF
cannot be deleted.
SIP trunk group
Remove SIP Run LST IOFC to check
that is being used
RMV ISIPTG Trunk Group High the office direction
by an IBCF office
of IBCF that references the
direction results in
trunk group. Then run
service failures.
RMV IOFC to delete the
office direction that
references the trunk
group before you
delete the IBCF SIP
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

trunk group that is

being referenced.

Modifying IBCF SIP

trunk groups may
Modify SIP Exercise caution when
result in
MOD ISIPTG Trunk Group High running this
registration and
of IBCF command.
call service
interruption.

This command is
used to block a
specified trunk
group during
commissioning or
maintenance. Once
Block IBCF a trunk group is
To unblock a trunk
BLK ISIPTG SIP Trunk High blocked, all
group, run UBL ISIPTG.
Group incoming calls from
the trunk group are
rejected and this
trunk group is not
selected to route
outgoing
messages.

Deleting a SIP AN
record results in
service
Remove SIP interruption. After
Exercise caution when
Access Net a SIP AN record is
RMV SIPAN High running this
Record of deleted, the
command.
ABCF CloudSE2980 fails
to establish calls
for users on the SIP
access network.

Modify SIP Modifying an ABCF

Exercise caution when
Access Net AN record may
MOD SIPAN High running this
Record of interrupt ongoing
command.
ABCF calls and result in
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

call establishment
failures.

Deleting an IBCF
signaling address
Remove IBCF An IBCF signaling
that is being used
RMV IADDR Signaling High address in use cannot
by a Diameter link
Address be deleted.
results in call
failures.

Changing GR IP
group name may
Modify IBCF result in IBCF Exercise caution when
MOD IADDR Signaling High signaling address running this
Address unavailability and command.
service
interruption.

Deleting a well-
Remove known port group
Exercise caution when
Local Well- interrupts all
RMV LWNPORTG High running this
Known Port services on the
command.
Group well-known ports
in this group.

Changing a well-
known port name,
Modify Local such as Local well- Exercise caution when
MOD LWNPORTG Well-Known High known port1, running this
Port Group interrupts all command.
services on the
port.

Remove Deleting a well- Exercise caution when

RMV LWNPORT Local Well- High known port may running this
Known Port cause fatal errors. command.

Modifying an ABCF
Exercise caution when
Modify A- office direction
MOD AOFC High running this
BCF OFC results in
command.
unavailability of
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

registration and
call services.

SET PPPARA Set Privacy High Anonymizing Exercise caution when

Protection privacy running this
Parameter information is an command.
important method
to protect
subscriber privacy.
Before disabling
the anonymization
function, ensure
that the operation
complies with local
privacy protection
laws. Disabling the
anonymization
function is a high-
risk operation.

Changing the
Switchover policy
or Switchback
policy value is a Exercise caution when
risky operation running this
because it may command. You are
Add ABCF cause a significant advised to set
ADD ART High
ART impact on the Switchover policy to
system (such as AUTO(Auto) and
service Switchback policy to
interruption). MANUAL(Manual).
Exercise caution
when changing the
parameter value.

 Modifying an Exercise caution when

ABCF route running this
Modify ABCF results in command.
MOD ART High
ART unavailability of You are advised to set
registration and Switchover policy to
call services. AUTO(Auto) and
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

 Changing the Switchback policy to

Switchover MANUAL(Manual).
policy or
Switchback
policy value is a
risky operation
because it may
cause a
significant
impact on the
system (such as
service
interruption).
Exercise caution
when changing
the parameter
value.

Deleting an ABCF Exercise caution when

Remove
RMV ART High route may cause running this
ABCF ART
severe errors. command.

Modifying an IBCF
office direction
Exercise caution when
Modify IBCF results in
MOD IOFC High running this
OFC unavailability of
command.
registration and
call services.

Changing the
Switchover policy
or Switchback Exercise caution when
policy value is a running this
risky operation command. You are
Add IBCF because it may advised to set
ADD IRT High
Route cause a significant Switchover policy to
impact on the AUTO(Auto) and
system (such as Switchback policy to
service MANUAL(Manual).
interruption).
Exercise caution
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

when changing the

parameter value.

 Modifying an
IBCF route
results in
unavailability of
call services.
 Changing the
Switchover
policy or Exercise caution when
Switchback running this
policy value is a command.
Modify IBCF risky operation You are advised to set
MOD IRT High
Route because it may Switchover policy to
cause a AUTO(Auto) and
significant Switchback policy to
impact on the MANUAL(Manual).
system (such as
service
interruption).
Exercise caution
when changing
the parameter
value.

Deleting an IBCF Exercise caution when

Remove IBCF
RMV IRT High route may cause running this
Route
fatal errors. command.

Deleting Signal
policy name may
Remove interrupt services Exercise caution when
RMV SIGPLC Signaling High on the access running this
Policy network that command.
references the
signaling policy.

Changing Signal
Modify Exercise caution when
policy name may
MOD SIGPLC Signaling High running this
interrupt services
Policy command.
on the access
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

network that
references the
signaling policy.

Before deleting a
Deleting a core-
Remove core-side signaling
side signaling
Core-side address group, delete
address group that
RMV ACNADDRG Signaling High the core-side signaling
is being used by an
Address addresses in the core-
ABCF route results
Group side signaling address
in call failures.
group.

Deleting an ABCF
signaling address
Remove A- An ABCF signaling
that is being used
RMV AADDR BCF Signaling High address in use cannot
by a Diameter link
Address be deleted.
results in call
failures.

Changing the value

of GR IP group
Modify A- Exercise caution when
name may cause
MOD AADDR BCF Signaling High running this
ABCF signaling
Address command.
address
unavailability.

After a media You can delete a

domain that is media domain only
being referenced when the following
by a SIP AN or a SIP conditions are met:
trunk group is  The media domain
deleted, the is not used by any
Remove
CloudSE2980 fails SIP access network.
RMV MEDDN Media High
to allocate IP You can check by
Domain
terminations for running LST SIPAN.
the calls initiated  The media domain
from the SIP AN or is not used by any
SIP trunk group, SIP trunk group.
resulting in call You can check by
failures. running LST ASIPTG.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

 No media address
is configured in the
media domain. You
can check by
running LST
MEDADDR.

After a media IP
address that is
being referenced
by a media domain
is deleted, the
Remove Exercise caution when
bandwidth
RMV MEDADDR Media IP High running this
available for the
Address command.
media domain
decreases
accordingly,
resulting in call
failures.

 Modifying Bear
bandwidth(kbit
/s) is a risky
operation and
affects services.
Modify  Modifying GR IP Exercise caution when
MOD MEDADDR Media IP High group name is a running this
Address risky operation command.
and may result
in that media
addresses
cannot be used
normally.

Changing a NAT
policy name may Exercise caution when
Modify NAT Mediu
MOD NAT interrupt services running this
Policy m
of the local NAT command.
device.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

Deleting a NAT
policy name may Exercise caution when
Remove NAT Mediu
RMV NAT interrupt services running this
Policy m
of the local NAT command.
device.

Remove
Network Deleting an NAPT Exercise caution when
Mediu
RMV NAPT Address and record interrupts running this
m
Port services. command.
Translation

After this
command is
executed, whether
the modification
takes effect
immediately
depends on the
configuration of bit
13 of BCFPARA11. If
bit 13 is set to 1,
Modify DNS Exercise caution when
Mediu the SBC resets a
MOD DNSPP Protocol running this
m specified module.
Parameter command.
The modification
takes effect
immediately after
the module is
reset. If bit 13 is
set to 0, the
modification takes
effect after the ME
is reset by running
RST ME.

If the DNS link is

Confirm with Huawei
Remove Link deleted, the
technical support
Between BCF Mediu communication
RMV DNSLNK engineers before
and Peer m between the BCF
running this
DNS and the DNS server
command.
is interrupted.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

Modifying a DNS
link record may
cause link
disconnection and
registration and Confirm with Huawei
Modify Link
call failures. If only technical support
Between BCF Mediu
MOD DNSLNK one link is available engineers before
and Peer m
between the BCF running this
DNS
and DNS server, command.
modifying the link
disconnects the
BCF from the DNS
server.

A DNS link can be

Running this
deactivated only when
command may
its connection status
interrupt the
is Up. You can run DSP
communication
DNSLNK to view the
between the BCF
Deactivate connection status of a
and DNS server. If
Link DNS link. The DNS link
Mediu only one link is
DEA DNSLNK Between BCF can be activated again
m available between
and Peer only after ACT DNSLNK is
the BCF and DNS
DNS executed.
server,
Confirm with Huawei
deactivating the
technical support
link disconnects
engineers before
the BCF from the
running this
DNS server.
command.

Deleting an IBCF
ENUM/NP query
Remove
policy may cause Exercise caution when
ENUM/NP Mediu
RMV IENUMNP ENUM query running this
Query Policy m
failures, resulting command.
for IBCF
in number-based
routing failures.

Remove the Deleting the

Exercise caution when
Mapping Mediu mapping between
RMV SSECPLCMAP running this
Between m a signaling security
command.
Signaling policy and SIP
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

Security ANs/trunk
Policy and groups/PBXs/TURN
SIP server causes the
AN/Trunk security policy to
Group/PBX be ineffective,
which probably
incurs network
attacks.

Deleting a signaling
security policy
name may cause
the binding
relationships
Remove
related to this Exercise caution when
Signaling Mediu
RMV SSECPLC policy to be running this
Security m
ineffective. As a command.
Policy
result, the signaling
security policy is
ineffective, and
network attacks
incur.

Changing a
signaling security
policy name may
cause the binding
relationships
Modify
related to this Exercise caution when
Signaling Mediu
MOD SSECPLC policy to be running this
Security m
ineffective. As a command.
Policy
result, the signaling
security policy is
ineffective, and
network attacks
incur.

An encryption policy
Deleting an
Remove cannot be deleted
Mediu encryption policy
RMV ENCRYPLC Encryption when it is being used
m may cause TLS link
Policy by an encryption
anomalies,
policy set. Before
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

resulting in TLS deleting the

service failures. encryption policy, run
MOD ENCRYPLCSET to
unbind the encryption
policy from the
encryption policy set.

Modifying an
encryption policy
Modify Exercise caution when
Mediu may cause TLS link
MOD ENCRYPLC Encryption running this
m anomalies,
Policy command.
resulting in TLS
service failures.

An encryption policy
set cannot be deleted
when it is being used
Deleting an
by a SIP access
encryption policy
network. Before
Delete set that is being
RMV Mediu deleting the
ENCRYPLCSET Encryption used by a SIP AN
m encryption policy set,
Policy Set results in service
run MOD SIPAN and MOD
loss or
ISIPTG to unbind the
interruptions.
encryption policy set
from the SIP access
network.

This command is
intended for use
Modifying a call during data
Modify Call CAC policy may commissioning in site
MOD CACCALLPLC High
CAC Policy result in service deployment. Do not
interruption. use this command
during routine
maintenance.

This command is
Modifying an IM intended for use
Modify IM CAC policy may during data
MOD CACPIMPLC High
CAC Policy result in service commissioning in site
interruption. deployment. Do not
use this command
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

during routine
maintenance.

This command is
intended for use
Modifying a per-
during data
Modify Per- user CAC policy
MOD commissioning in site
CACPUSERPLC User CAC High may result in
deployment. Do not
Policy service
use this command
interruption.
during routine
maintenance.

This command is
intended for use
Modifying a CAC during data
Modify CAC policy set may commissioning in site
MOD CACPLCSET High
Policy Set result in service deployment. Do not
interruption. use this command
during routine
maintenance.

This command is
intended for use
Modifying a
during data
Modify registration CAC
commissioning in site
MOD CACREGPLC Registration High policy may result in
deployment. Do not
CAC Policy service
use this command
interruption.
during routine
maintenance.

This command is
intended for use
Modifying a service during data
Modify
CAC policy may commissioning in site
MOD CACSVCPLC Service CAC High
result in service deployment. Do not
Policy
interruption. use this command
during routine
maintenance.

Set Flow Modifying flow Exercise caution when

Mediu
SET FCPARA Control control parameters running this
m
Parameters for signaling traffic command.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

on the SBC may

result in call loss,
user offline, or
registration
failures.
A larger value may
overload the
system or even
cause system
breakdown,
whereas a smaller
value may cause
normal call
messages to be
discarded, wasting
system resources.

After the blacklist Only the users who no

Remove Mediu is deleted, system longer launch attacks
RMV BLKLST
Blacklist m security may be can be deleted from
endangered. the blacklist.

After the whitelist

is deleted, the
CloudSE2980
cannot
preferentially
provide services
Only untrusted users
Remove Mediu for the whitelisted
RMV WHTLST can be deleted from
Whitelist m users when traffic
the whitelist.
is heavy. The
CloudSE2980 may
deny the services
for the sake of
security when
traffic bursts.

Removing an H.248 Run this command

Remove Mediu MG affects load with the assistance of
RMV H248MG
H.248 MG m balancing of SCU technical support
modules. engineers.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

Changing the
H.248 encoding
type value may
render UEs unable
to parse packets
and result in call
failures. Changing Run this command
Set H.248
Mediu the Enable with the assistance of
SET H248SP Service
m termination technical support
Parameter
number statistics engineers.
value may cause
inconsistent
operation with the
peer softswitch,
affecting statistics
correctness.

Removing an H.248
Run this command
Remove package affects
Mediu with the assistance of
RMV H248PKG H.248 message parsing,
m technical support
Package which may result in
engineers.
call failures.

Running this
command causes
Exercise caution when
Block H.248 Mediu the ABCF H.248
BLK H248TG running this
Trunk Group m trunk group to stop
command.
processing new
access services.

Modifying an
H.248 trunk group
Modify Exercise caution when
Mediu may result in
MOD H248TG H.248 Trunk running this
m unavailability of
Group command.
registration and
call services.

Deleting an H.248
Remove A- access network Exercise caution when
Mediu
RMV H248AN BCF H.248 record may result running this
m
AN in service command.
interruption,
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

causing all users on

the H.248 access
network to fail to
establish calls.

Changing an
access-side IP
Modify A- Exercise caution when
Mediu address name may
MOD H248AN BCF H.248 running this
m interrupt the
AN command.
services on the
original H.248 AN.

Before running this

command, run DSP
CINFO to check
whether the IBCF
H.323 trunk group to
Deleting an H.323
be deleted is being
trunk group may
Remove IBCF used by any call and
Mediu lead to the
RMV IH323TG H.323 Trunk referenced by any
m interruption of
Group IBCF office direction.
ongoing calls on
An IBCF H.323 trunk
the H.323 network.
group can be deleted
only if it is neither
used by any call nor
referenced by any
IBCF office direction.

Before running this

command, run DSP
CINFO to check
whether the IBCF
Modifying an
H.323 trunk group to
H.323 trunk group
Modify IBCF be modified is being
Mediu may lead to the
MOD IH323TG H.323 Trunk used by any call and
m interruption of
Group referenced by any
ongoing calls on
IBCF office direction.
the H.323 network.
An IBCF H.323 trunk
group can be modified
only if it is neither
used by any call nor
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

referenced by any
IBCF office direction.

Before blocking an
IBCF H.323 trunk
group, run DSP CINFO to
check whether the
trunk group is being
Blocking an IBCF
used by any call and
Block IBCF H.323 trunk group
Mediu referenced by any
BLK IH323TG H.323 Trunk may result in
m IBCF office direction.
Group service
The trunk group can
interruption.
be blocked only if it is
neither used by any
call nor referenced by
any IBCF office
direction.

Before deleting a
referenced H.323
Exercise caution when
Remove Mediu policy, you need to
RMV H323PLC running this
H.323 Policy m first cancel the
command.
reference
relationship.

Changing the
H.323 policy name
Exercise caution when
Modify Mediu may lead to the
MOD H323PLC running this
H.323 Policy m interruption of
command.
some H.323
ongoing calls.

To delete an IP
Running this
address group which
Remove IP command may
Mediu has been referenced,
RMV IPGRP Address interrupt services
m you need to cancel
Group on the live
the reference
network.
relationship first.

Modify IP Running this Exercise caution when

Mediu
MOD IPGRP Address command may running this
m
Group interrupt services command.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

on the live
network.

Modifying the SIP

Modify HMR request HMR
Exercise caution when
Policy for Mediu policy may result in
MOD HMRREQPLC running this
Request m system errors and
command.
Message service
interruption.

Modifying the SIP

Modify HMR response HMR
Exercise caution when
Policy for Mediu policy may result in
MOD HMRRSPPLC running this
Response m system errors and
command.
Message service
interruption.

Modifying an HMR
policy set record
may interrupt the Exercise caution when
Modify HMR Mediu
MOD HMRPLCSET registration or call running this
Policy Set m
services involved in command.
the HMR
processing.

Modifying a header
rule may interrupt
Modify HMR Exercise caution when
Mediu the registration or
MOD HMRHDRRL Rule for running this
m call services
Header command.
involved in the
HMR processing.

Modifying a
message body rule
Modify HMR
may interrupt the Exercise caution when
Policy for Mediu
MOD HMRBDYRL registration or call running this
Message m
services involved in command.
Body
the HMR
processing.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

Modifying a first
line rule may
Modify HMR interrupt the Exercise caution when
Mediu
MOD HMRFLRL Rule for First registration or call running this
m
Line services involved in command.
the HMR
processing.

If the AVPs used by

the peer device are
Changing attribute not those defined in
values may result 3GPP specifications
in Diameter and the vendor ID or
message exchange M flag bit in the AVPs
Modify
Mediu failures and is inconsistent with
MOD DIAMAVP Diameter
m negotiation with that configured on the
AVP
the peer device CloudSE2980, modify
before the the AVPs based on the
modification is AVPs negotiated with
required. the peer device by
running this
command.

Adding a GR group
Exercise caution when
Add GR Mediu may result in
ADD GRGRP running this
Group m service
command.
unavailability.

Deleting a GR
group interrupts
services if the
Before this operation,
Remove GR Mediu license control
RMV GRGRP you must run STP GRGRP
Group m item of the dual-
to stop the GR group.
system hot backup
feature is not
loaded.

Modifying a GR
group results in Before this operation,
Modify GR Mediu
MOD GRGRP service loss if the you must run STP GRGRP
Group m
license for the to stop the GR group.
dual-system hot
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

backup feature is
not loaded.
If you run this
command after the
GR group starts,
services may be
unavailable.

Running this
command will
result in ongoing
Run DSP GRGRP to view
call disconnection.
the GR group status
If this command is
before running this
executed for a
command. The
switchback in a
switchover is not
short period after a
allowed when a GR
Swap GR Mediu master/backup
SWP GRGRP group is being started.
Group m switchover, user
This command can be
data will be lost
executed on a master
because batch data
GR group only when
backup is not
the GR group is
complete. After a
started to avoid
switchover, users
impact on services.
can use services
only after they are
reregistered.

Starting a GR group
results in service
Exercise caution when
STR GR loss if the dual-
STR GRGRP Low running this
Group system hot backup
command.
feature is not
deployed.

Before a GR group is
Stopping a GR stopped, it is advised
group results in to check whether the
Stop GR service loss if the operating status of
STP GRGRP Low
Group dual-system hot the GR group is the
backup feature is same as the
not deployed. configuration status. If
not, perform a
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

After this master/backup

command is switchover manually
executed, the GR so that UEs can access
group reverts to the homed SBC.
the original state When the operating
(state before the status of a pair of GR
GR group starts), groups is not the
and no access same, it is advised to
service is available. stop the backup GR
group and then the
master GR group to
avoid a
master/backup
switchover.

Deleting a BFD
Before deleting a BFD
group of a GR
group, check that the
Remove BFD Mediu group interrupts
RMV GRBFDGRP BFD group is not
Group m services if the Run
bound to any GR
state of the GR
group.
group is not Stop.

You can modify (bind

or unbind) BFD
sessions in a BFD
group in the following
Modifying a BFD scenarios:
group of a GR
 The BFD group is
Modify BFD Mediu group interrupts
MOD GRBFDGRP not being used by a
Group m services if the Run
GR group.
state of the GR
group is not Stop.  The BFD group is
being used by a GR
group, but the GR
group is not
operating.

Deleting a
Before this operation,
Remove GR heartbeat link of a
Mediu you must run STP GRGRP
RMV GRHBLNK Heartbeat GR group
m to stop the GR group
Link interrupts services
and unbind the
if the Run state of
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

the GR group is not heartbeat link from

Stop. the GR group.

Modifying the IP
Modifying a
address and port of a
heartbeat link of a
heartbeat link in a GR
Modify GR GR group
Mediu group is a risky
MOD GRHBLNK Heartbeat interrupts services
m operation. Before this
Link if the Run state of
operation, you must
the GR group is not
run STP GRGRP to stop
Stop.
the GR group.

Before deleting a
backup link of a GR
Deleting a backup
group, run STP GRGRP to
link of a GR group
stop the GR group.
Remove GR Mediu interrupts services
RMV GRBKLNK The backup link of a
Backup Link m if the Run state of
GR group can be
the GR group is not
deleted only when it is
Stop.
not bound to any GR
group.

Before changing
Modifying a address- and port-
backup link of a GR related parameters of
Modify GR Mediu group interrupts a backup link of a GR
MOD GRBKLNK
Backup Link m services if the Run group, run STP GRGRP to
state of the GR stop the GR group.
group is not Stop. Then change the
parameters.

Deleting a GR IP Before deleting a GR

address group IP address group, run
Remove GR Mediu interrupts services RMV GRGRP to delete
RMV GRIPGRP
IP Group m if the Run state of the GR group to which
the group is not the GR IP address
Stop. group is bound.

Transcoding capability
Remove Deleting a
Mediu used by a SIP AN or an
RMV TCCAP Transcode transcoding
m IBCF SIP trunk group
Capability capability results in
cannot be deleted. To
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

service delete such a

unavailability. transcoding capability,
perform the following
operations:
1. Run LST SIPAN or LST
ISIPTG and locate
the SIP AN or IBCF
SIP trunk group
that uses the
transcoding
capability.
2. Run MOD SIPAN or
MOD ISIPTG to set
the transcoding
capability to null.

Modifying a
transcoding
Modify Exercise caution when
Mediu capability has an
MOD TCCAP Transcode running this
m impact on codec-
Capability command.
related service
procedures.

Deleting codec
information may
result in media
Remove Exercise caution when
Mediu negotiation failures
RMV CODECINF Codec running this
m or even call
Information command.
establishment or
renegotiation
failures.

Modifying codec
information may
result in media
Modify Exercise caution when
Mediu negotiation
MOD CODECINF Codec running this
m failures. As a
Information command.
result, session
establishment or
renegotiation fails.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

This command
takes effect
immediately after
Modify it is executed. Exercise caution when
Mediu
MOD DIAMPEER Diameter Modifying a running this
m
Peer Entity Diameter peer may command.
result in temporary
DNS link
disconnection.

The new settings of

the parameters
except Link name
take effect only
after all BSU
Modify Exercise caution when
Mediu processes are
MOD DIAMLNK Diameter running this
m restarted by
Link command.
running RST MODULE.
Restarting BSU
processes results in
service
interruption.

Deleting Diameter
links results in
Diameter message
transmission
failures. The
impact of this
operation depends
Remove on QoS control, Exercise caution when
Mediu
RMV DIAMLNK Diameter charging, and running this
m
Link emergency call command.
services that are
respectively
implemented over
the Rx, Rf, and Ml
interfaces based
on the Diameter
protocol.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

Deactivating a link
results in link
disconnection. If
only a single link is Confirm with Huawei
Deactivate used to connect technical support
Mediu
DEA DIAMLNK Diameter the CloudSE2980 engineers before
m
Link to a device, this running this
operation may command.
interrupt the
connection in
between.

 The local Diameter

entity being used
by the Diameter
peer cannot be
deleted. To delete
such a local
Diameter entity,
run RMV DIAMPEER to
delete the
Diameter entity,
Deleting a local
and then delete the
Diameter entity
local Diameter
results in the
entity.
failures of the QoS
Remove  The local Diameter
Mediu control, charging,
RMV DIAMLOC Diameter entity being used
m and emergency call
Local Entity by the A-BCF
services over the
cannot be deleted.
Diameter-based
To delete such a
Rx, Rf, and Ml
local Diameter
interfaces.
entity, run RMV ABCF
to delete the A-
BCF, and then
delete the local
Diameter entity.
 The local Diameter
entity being used
by the P-CSCF
cannot be deleted.
To delete such a
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

local Diameter
entity, run RMV
PCSCF to delete the
P-CSCF, and then
delete the local
Diameter entity.
 The local Diameter
entity being used
by the E-CSCF
cannot be deleted.
To delete such a
local Diameter
entity, run RMV ECSCF
to delete the E-
CSCF, and then
delete the local
Diameter entity.
 The local Diameter
entity being used
by the IBCF cannot
be deleted. To
delete such a local
Diameter entity,
run RMV IBCF to
delete the IBCF,
and then delete the
local Diameter
entity.

Modifying a local
Diameter entity
results in the
failures of the QoS
control, charging,
Modify Exercise caution when
Mediu and emergency call
MOD DIAMLOC Diameter running this
m services over the
Local Entity command.
Diameter-based
Rx, Rf, and Ml
interfaces. The
modification takes
effect only after
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

the CloudSE2980
restarts. The
restart results in
service
interruption.

Deleting Diameter
routes results in
Diameter message
transmission
failures. The
impact of this
operation depends
Remove on QoS control, Exercise caution when
Mediu
RMV DIAMRT Diameter charging, and running this
m
Route emergency call command.
services that are
respectively
implemented over
the Rx, Rf, and Ml
interfaces based
on the Diameter
protocol.

Modifying
Diameter routes
results in Diameter
message
transmission
failures. The
impact of this
Modify Exercise caution when
Mediu operation depends
MOD DIAMRT Diameter running this
m on QoS control,
Route command.
charging, and
emergency call
services that are
respectively
implemented over
the Rx, Rf, and Ml
interfaces based
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

on the Diameter
protocol.

Deleting a
Diameter
Remove
mediation rule Exercise caution when
Diameter Mediu
RMV DIAMMEDRL record results in running this
Mediation m
the failures of command.
Rule
Diameter
mediation actions.

Deleting a
Diameter
Remove
mediation peer Exercise caution when
RMV Diameter Mediu
DIAMMEDPEER record may result running this
Mediation m
in the failures of command.
Peer
Diameter
mediation peers.

Deleting an Rx
Exercise caution when
Remove Rx Mediu policy record
RMV RXPLC running this
Policy m results in severe
command.
errors.

Modifying an Rx
Exercise caution when
Modify Rx Mediu policy record
MOD RXPLC running this
Policy m results in severe
command.
errors.

Changing Diameter
protocol
parameters may
result in system
anomalies.
Modify
Some parameter Exercise caution when
Diameter Mediu
MOD DIAMPP settings take effect running this
Protocol m
only after all SCU command.
Parameter
and BSU processes
are restarted. You
can run RST MODULE
to restart all SCU
and BSU processes.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

Running this
command may
change the
charging mode.
If this command is
executed
incorrectly, there is Exercise caution when
Modify Rf
MOD RFPLC High a possibility that no running this
Policy
ACR message is command.
generated for
desired services or
that redundant
ACR messages are
generated for free-
of-charge services.

Running this
command will
Exercise caution when
Modify Rf change the
MOD RFPARAM High running this
Parameter charging mode,
command.
causing charging
inaccuracy.

Remove SIP-I Deleting a SIP-I

Exercise caution when
Trunk Mediu policy record
RMV SIPICFG running this
Configuratio m results in severe
command.
n errors.

It takes about 8
minutes for
command
execution to Run this command
Restore ISUP Mediu complete. under the guide of
RES MASK
Mask Data m ISUP mask data is Huawei technical
restored to default support engineers.
values after this
command is
executed.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

Modifying an IBCF
route selection
Modify IBCF Exercise caution when
Mediu source code results
MOD IRTSSC Routing running this
m in route analysis
Source Code command.
failures or call
failures.

Deleting an IBCF
Remove
route analysis data Exercise caution when
Route Mediu
RMV IRTANA record results in running this
Analysis for m
route analysis command.
IBCF
failures.

Modifying an IBCF
Modify
route analysis data Exercise caution when
Route Mediu
MOD IRTANA record results in running this
Analysis for m
route analysis command.
IBCF
failures.

Deleting an IBCF
number route
analysis data
record causes the
IBCF to perform
Remove route analysis
Number using the wildcard Exercise caution when
Mediu
RMV INRTANA Route route selection running this
m
Analysis for name command.
IBCF corresponding to
the numbers
carried in received
INVITE requests,
resulting in route
analysis failures.

Modifying a
Modify
number route
Number Exercise caution when
Mediu analysis data
MOD INRTANA Route running this
m record results in
Analysis for command.
route analysis
IBCF
failures.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

Clearing P-CSCF
dynamic routes
Clear P-CSCF may result in Exercise caution when
Mediu
CLR DRT Dynamic registration and running this
m
Routes call service failures command.
on a P-CSCF logical
entity.

Deleting an IBCF
Remove IBCF number change
Exercise caution when
Number Mediu policy results in
RMV INCPLC running this
Change m route analysis
command.
Policy failures or call
failures.

Modifying an IBCF
Modify IBCF number change
Exercise caution when
Number Mediu policy results in
MOD INCPLC running this
Change m route analysis
command.
Policy failures or call
failures.

Deleting an IBCF
Remove IBCF flexible routing
Exercise caution when
Flexible Mediu policy results in
RMV IFLRPLC running this
Routing m route analysis
command.
Policy failures or call
failures.

Modifying an IBCF
Modify IBCF flexible routing
Exercise caution when
Flexible Mediu policy results in
MOD IFLRPLC running this
Routing m route analysis
command.
Policy failures or call
failures.

Deleting an SCC AS
domain name
Remove SCC Exercise caution when
Mediu record may result
RMV SCCAS AS Domain running this
m in service
Name command.
interruption. After
an SCC AS domain
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

name is deleted,
the SBC cannot
perform eSRVCC
handovers for the
users of the SCC
AS.

This command is
Deleting an ATCF is intended for use
a risky operation during data
Remove Mediu and may result in commissioning in site
RMV ATCF
ATCF Entity m system errors and deployment. Do not
service use this command
interruption. during routine
maintenance.

If you change the This command is

values of key intended for use
parameters on an during data
Modify ATCF Mediu ATCF, such as commissioning in site
MOD ATCF
Entity m Address, Port and deployment. Do not
STN-SR number, use this command
eSRVCC handovers during routine
fail. maintenance.

 If the P-CSCF logical

entity needs to be
deleted, run CLR DRT
to clear the
Deleting a P-CSCF associated DRT
logical entity may resources.
Remove P- result in  The P-CSCF logical
Mediu
RMV PCSCF CSCF Logical registration and entity being used
m
Entity call service failures by a SIP cannot be
on the P-CSCF deleted.
logical entity.  To delete this P-
CSCF logical entity,
perform the
following
operations:
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

1. Run LST SIPAN to

view the SIP
access network
data using the
P-CSCF logical
entity.
2. Run MOD SIPAN
to delete the
reference
relationship
between the P-
CSCF logical
entity and SIP
access
network.

Modifying a P-CSCF
logical entity may
Modify P- result in Exercise caution when
Mediu
MOD PCSCF CSCF Logical registration and running this
m
Entity call service failures command.
on the P-CSCF
logical entity.

To delete the TRF,

perform one of the
following operations:
1. Run LST PCSCF to
check whether
The TRF (specified the P-CSCF logical
by the TRF domain entity using the
name) that is being TRF is available.
Remove TRF Mediu
RMV TRF used by a P-CSCF 2. If such a P-CSCF
Entity m
logical entity or logical entity is
signaling policy available, run MOD
cannot be deleted. PCSCF to dissociate
the TRF from the
P-CSCF logical
entity.
3. Run LST SIGPLC to
check whether
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

the signaling
policy using the
TRF is available.
4. If such a signaling
policy is available,
run MOD SIGPLC to
dissociate the TRF
from the signaling
policy.

To delete the domain

group, perform the
following operations:
1. Run LST PCSCF to
check whether
the P-CSCF logical
entity using the
domain group is
available.
2. If such a P-CSCF
logical entity is
available, run MOD
The domain group
PCSCF to dissociate
that is being used
Remove the domain group
Mediu by a P-CSCF logical
RMV DNG Domain from the P-CSCF
m entity or signaling
Group logical entity.
policy cannot be
deleted. 3. Run LST SIGPLC to
check whether
the signaling
policy using the
domain group is
available.
4. If such a signaling
policy is available,
run MOD SIGPLC to
dissociate the
domain group
from the signaling
policy.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

Deleting an IP-PBX
interrupts all
Remove SIP services on the IP-
Exercise caution when
Private Mediu PBX, resulting in
RMV SIPPBX running this
Branch m registration failures
command.
Exchange for the users
attached to the IP-
PBX.

The OMU may

Collecting only the
perform flow
data for fault locating
control for CHRs,
is recommended.
affecting
Enable the online
performance
Set CHR anonymization
Mediu measurement.
SET CHRPLCY Output function to prevent
m Check whether the
Policy private data in CHRs
CloudSE2980 is
from being disclosed
configured to
and exempt you from
anonymize
legal liabilities for data
personal data in
leak.
CHRs as required.

OMU services must

be restarted by
Set KPI running RST OMU for Exercise caution when
Mediu
SET KPITHD Monitoring the new value of running this
m
Information Measurement command.
period to take
effect.

Changing the
values of TCP
protocol stack
Exercise caution when
Set TCP Mediu parameters may
SET TCPPARA running this
Parameter m result in TCP
command.
packet
transmission
anomalies.

Exercise caution when

Set BTP Mediu Setting bulk
SET BTPPARA running this
Parameters m transfer protocol
command.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

parameters results
in severe errors.

Running this
Export command takes a
Run this command
EXP PEERLIST Terminal Low long time, which
when traffic is light.
Type may affect
services.

If the number of
registered users
exceeds 4,000,000,
the execution of
this command can
last as long as 30
minutes.
Therefore, exercise
caution when
running this Only the administrator
Export User Mediu
EXP USRDATA command. can run this
Data m
It is recommended command.
that the command
be executed at an
interval greater
than or equal to 1
hour to minimize
the impact on the
CloudSE2980's
hard disk and other
services.

Canceling user
Ensure that the user is
registration causes
Cancel User unauthorized before
CNL AURCNL High the user to be
Registration running this
deregistered
command.
forcibly.

This command is
used to enable Exercise caution when
Debug
STR SFTDEBUG Low software running this
Command
debugging or command.
adjust internal
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

status. Running
this command has
an adverse impact
on system
performance.
Enabling software
debugging on the
BSU, SCU, and CDB
affects service
continuity.

Determine whether
REL SESSION needs to
Running this be executed based on
Cancel command forcibly site requirements
REL SESSION High
Session releases all before running this
ongoing sessions. command. Run this
command only before
an upgrade.

A certificate subject
domain being used by
an A-BCF trunk group
cannot be deleted. To
Deleting a delete the certificate
certificate subject subject domain:
domain that is 1. Run LST ASIPTG to
Remove being referenced view the A-BCF
Certificate Mediu by an A-BCF trunk trunk group using
RMV CERTSUB
Subject m group causes the certificate
Domain certificate subject domain.
authentication 2. Run MOD ASIPTG to
failures, resulting delete the
in service loss. reference
between the
certificate subject
domain and A-BCF
trunk group.

Modify Mediu Before running this A certificate subject

MOD CERTSUB
Certificate m command, run LST domain being used by
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

Subject ASIPTG to check an A-BCF trunk group

Domain whether any A-BCF cannot be modified.
SIP trunk group To modify the
references the certificate subject
certificate subject domain:
domain to be 1. Run LST ASIPTG to
modified. view the A-BCF
trunk group using
the certificate
subject domain.
2. Run MOD ASIPTG to
delete the
reference
between the
certificate subject
domain and A-BCF
trunk group.

After this
command is
Modify
executed, run RST Exercise caution when
Resource
MOD RESOURCE High ME to restart the running this
Configuratio
ME so that the command.
n
modification takes
effect.

After this command is

Changing the
executed, run FMT and
maximum number
restart related
of tuples to an
modules.
improper value
If the maximum
causes abnormal
Modify number of tuples is
formatting data file
Maximum wrongly changed,
MOD MAXT High sizes, which may
Number of restore the
result in host
Tuples configuration
loading failures,
immediately by
board startup
yourself or with the
failures, or low
assistance of Huawei
availability of
technical support
memory resources.
engineers.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

Software
parameters are
used in specific
scenarios and
affect service
Confirm with Huawei
Modify connectivity,
technical support
Internal Mediu number display,
MOD SFP engineers before
Software m and other services.
running this
Parameter In common cases,
command.
multiple software
parameters must
be used together
to complete a
configuration.

Modifying global
Modify Run this command
system parameters
Global Mediu with the assistance of
MOD PUBPRM may result in
Performance m technical support
service
Parameter engineers.
interruption.

Parameter
Encryption key
must be configured
during ME
Exercise caution when
Modify ME Mediu initiation.
MOD MEPARA running this
Parameter m Modifying this
command.
parameter results
in subscription and
call transfer
failures.

After this
command is
executed with
Parameter ID set
Exercise caution when
Modify SIP Mediu to 0–17, 41–58,
MOD SIPPP running this
Parameter m 82–99, 123–140,
command.
164–181, or 105–
222, whether the
modification takes
effect immediately
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

depends on the
configuration of bit
13 of BCFPARA11. If
bit 13 is set to 1,
the SBC resets a
specified module.
The modification
takes effect
immediately after
the module is
reset. If bit 13 is
set to 0, the
modification takes
effect after the
SCU module is
reset by running
RST MODULE.

Modifying
OPTIONS detection
Modify configurations
OPTIONS incorrectly may Exercise caution when
Mediu
MOD OPTCCP Check cause OPTIONS running this
m
Configuratio detection failures, command.
n resulting in call and
registration
failures.

Some parameter
Modifying SCTP settings take effect
Modify SCTP protocol only after all BSU
MOD SCTPPP Protocol High parameters may modules are
Parameters result in abnormal restarted. You can run
system running. RST MODULE to restart
all BSU modules.

Changing the
Modify Exercise caution when
Mediu default QoS
MOD DQI Default QoS running this
m information may
Information command.
interrupt services.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

If Bandwidth value
or Min bandwidth
value is set too
small, video quality
Modify deteriorates. If Exercise caution when
Mediu
MOD SBI Service Bandwidth value running this
m
Bandwidth or Min bandwidth command.
value is set too
large, bandwidth
resources are
wasted.

This operation
requires DSP chip Exercise caution when
Set TC
SET TCFMWARE High reset. Resetting running this
FIRMWARE
the DSP chip command.
interrupts services.

Remove SRV Deleting an SRV Exercise caution when

Mediu
RMV DNSSRV Record of record of DNS may running this
m
DNS cause fatal errors. command.

Remove
Deleting a resource Exercise caution when
Resource Mediu
RMV DNSRESA record of DNS may running this
Record of m
cause fatal errors. command.
DNS

Starting an even Exercise caution when

Start Even Mediu
STR EVEN module may cause running this
Module m
fatal errors. command.

Remove Deleting a general

Exercise caution when
General Mediu emergency call
RMV GEMC running this
Emergency m may cause fatal
command.
Call errors.

Deleting a VM
Remove VM configuration Exercise caution when
Mediu
RMV VMCFGINS Configuratio instance record running this
m
n Instance may cause fatal command.
errors.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

After this
command is
executed, a
Set the redundancy
Switch of switchover will be
Exercise caution when
Automatic Mediu triggered between
SET FAULTCONF running this
Redundancy m the active and
command.
Switchover standby sites if
Upon Faults services of the
active site
dramatically
deteriorate.

Deleting a user Exercise caution when

Remove Mediu
RMV USERGRP group may cause running this
User Group m
fatal errors. command.

Dynamic blacklist
user information
involves private
data (IP addresses
or user numbers).
Export Run this command
Dynamic without violating Exercise caution when
Mediu
EXP BLKUSR Blacklist local laws and running this
m
User carriers' privacy command.
Information protection policies
and take necessary
measures to
ensure that private
data is adequately
protected.

SET SYSRM Set System High Service loss occurs Exercise caution when
Running if this command is running this command
Mode improperly with the assistance of
executed Huawei technical
support engineers.

RST VMGW Reset Virtual Mediu Resetting a vMGW Resetting a vMGW is a

Media m will delete the risky operation. Run
Gateway original vMGW this command only
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

configurations, and when the vMGW is no

the deleted longer used.
configurations A vMGW cannot be
cannot be deleted if the vMGW
restored, possibly is active, configured
causing incorrect with H.248 signaling
interconnection links, or is
between the interconnected with
vMGW and the an MGC.
MGC.

DEA VMGW Deactivate Mediu Deactivating a Exercise caution when

Virtual MGW m vMGW will make running this
the vMGW invalid, command, especially
possibly causing when using the forced
incorrect exit mode. The vMGW
interconnection releases all calls and
between the enters the out-of-
vMGW and the service state after the
MGC. command is executed.
The vMGW does not
receive any calls until
it is activated.

RMV MGC Remove Mediu Removing an MGC An MGC cannot be

MGC m will cause the deleted if H.248
connection with signaling links are
the MGC to configured or there
become are activated MGWs
disconnected. under the MGC.

RMV SADDR Remove Mediu Deleting the only The IP address that is
Signaling m signaling address being used by an
Address for interworking H.248 link cannot be
with the MGC will deleted.
cause the
connection to be
disconnected.

RMV H248LNK Remove Mediu Deleting the only Exercise caution when
H.248 Link m H.248 link for running this
interworking with command. Ensure that
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

the MGC will cause the operation mode

the connection to meets the
be disconnected. expectation.

SET UPPARA Set UP Mediu Incorrect user Exercise caution when

Protocol m plane parameter running this
Parameters settings will cause command. Ensure that
interconnection parameter settings
failures and affect are correct.
services.

LOD TONEFILE Load Static Low Loading an Exercise caution when

Tone File incorrect tone file running this
will cause command. Ensure that
announcement the tone file to be
playing errors. loaded is correct.

DEL TONEFILE Delete Static Low Deleting a tone file Exercise caution when
Tone File will cause running this
announcement command. Ensure that
playing errors. the tone file to be
deleted is correct.

SET ATCPARA Set TC Low Incorrect TC Exercise caution when

Parameters parameter settings running this
will cause codec command. Ensure that
conversion failures. parameter settings
are correct.

SET DSPARA Set DS Low Incorrect DS Exercise caution when

Parameters parameter settings running this
will cause data command. Ensure that
service failures. parameter settings
are correct.

SET RFC2833 Set RFC2833 Low Incorrect RFC2833 Exercise caution when
Parameters parameter settings running this
will cause DTMF command. Ensure that
signal detection parameter settings
failures. are correct.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

RST ATCPARA Restore TC Mediu Restoring TC This is a high risky

Parameters m parameters will command. System
As Default delete the original operations will fail if
Value configurations, and this command is
the deleted improperly executed.
configurations Exercise caution when
cannot be running this command
restored, possibly with the assistance of
causing codec Huawei technical
conversion failures. support engineers.

RST DSPARA Restore DS Mediu Restoring DS This is a high risky

Parameters m parameters will command. System
As Default delete the original operations will fail if
Value configurations, and this command is
the deleted improperly executed.
configurations Exercise caution when
cannot be running this command
restored, possibly with the assistance of
causing data Huawei technical
service failures. support engineers.

RST RFC2833 Restore Mediu Restoring RFC2833 This is a high risky

RFC2833 m parameters will command. System
Parameters delete the original operations will fail if
To Default configurations, and this command is
the deleted improperly executed.
configurations Exercise caution when
cannot be running this command
restored, possibly with the assistance of
causing DTMF Huawei technical
signal detection support engineers.
failures.

MOD ECSCF Modify E- Mediu Modifying an E- This command is

CSCF Logical m CSCF logical entity intended for use
Entity name is a risky during data
operation and may commissioning in site
cause the license deployment. Do not
to become invalid. use this command
during routine
maintenance.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

RMV ACODE Remove Low Deleting an area Exercise caution when

National code will cause the running this
Area Code area code-based command. Ensure that
called number the parameter setting
barring function to meets the
become invalid. expectation.

RMV ANI Remove Low The system Exercise caution when

Access includes access running this
Network Info network command. Ensure that
information in the the parameter setting
P-Access-Network- meets the
Info header field to expectation.
implement area
matching for
emergency calls.
Deleting the access
network
configurations will
cause this function
to become invalid.

RMV CACUSRGRP Remove Mediu If some user This command is

User Group- m groups occupy too intended for use
based CAC many resources, during data
Policy system running will commissioning in site
be unstable. The deployment. Do not
operator can add a use this command
user group CAC during routine
policy to restrict maintenance.
the resource usage
of a specific user
group. Deleting the
policy
configuration
causes this
function to
become invalid.

RMV VMMDU Remove Low Services will be This is an internal

Module affected if a command and cannot
Group
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

module group is be executed on the

incorrectly deleted. OMU client.

RST RUDB Reset RU High After an RU is This is a high risky

reset, the RU command. Service
configuration data failures occur if this
is not lost. Services command is
are interrupted improperly executed.
during the reset. Exercise caution when
running this command
with the assistance of
Huawei technical
support engineers.

RST DBINSTANCE Reset CSDB High After a CSDB Running this

Instance instance is reset, command is highly
all subscriber data risky. Running this
will be cleared command with
from the instance. parameters set to
incorrect values
affects system
performance and
services. Exercise
caution when running
this command and
contact Huawei
technical support
engineers for
assistance.

RST PROCESSDB Reset Mediu Services will be This is a high risky

Process m affected if a command. Misuse of
process is reset. this command affects
Exercise caution system performance
when you reset a and service use.
process. Exercise caution when
running this command
with the assistance of
Huawei technical
support engineers.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

RMV Remove All Low Running this Running this

UPDDBFILESDB
Saved command will command is highly
Upgrade DB remove all saved risky. Running this
Files upgrade DB files. command with
parameters set to
incorrect values
affects system
performance and
services. Exercise
caution when running
this command and
contact Huawei
technical support
engineers for
assistance.

ACT PACKAGEDB Activate Low If the software This command can be

Software package to be executed only after
Package loaded has a basic LOD PACKAGEDB is
version or a cold executed.
patch, running this
command will
restart the system.

OPR Upgrade Low Running this Exercise caution when

UPDPRECHKDB
PreCheck command will running this
check the system command. Ensure that
before an upgrade. the parameter setting
meets the
expectation.

SET Set CSDB Low Inappropriate flow The initial values of

DBTHRESHOLD
Threshold control threshold the parameters in this
settings will affect command are
the system rational. Therefore,
performance. you are advised not to
run this command to
modify them.

RMV PATCHDB Delete Patch Low Running this Exercise caution when
command will running this
delete system command.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

patches. If cold
patches are
involved, the
system will restart.

DEC RUDB Remove RU Mediu Running this Exercise caution when

m command will running this command
delete VMs, with the assistance of
increasing the scale Huawei technical
group load. support engineers.

SWP OMUDB Perform Low Running this This command can be

Master/Slav command may used only in HA mode.
e OMU affect services You can run DSP
Switchover carried by an OMU. OMUDB to check
whether Switch State
is Ready.
After you run this
command, run DSP
OMUDB to check the
status of the OMU.
Compare the status
with that obtained
before the switchover
to determine whether
the switchover is
successful.

COL LOGDB Collect Log Low Running this Exercise caution when
command will running this command
consume system with the assistance of
resources (CPU, Huawei technical
memory, and disk). support engineers.

RST VNFCDB Reset High Running this This is a high risky

System command will command. Service
restart the system. failures occur if this
During system command is
reset, services improperly executed.
running on the Exercise caution when
VNFC will be running this command
interrupted. with the assistance of
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

Huawei technical
support engineers.

RMV Clear Debug Low Running this Exercise caution when

DEBUGRECORDDB
Record command will running this
delete abnormal command.
records, affecting
routine
maintenance.

LOD PACKAGEDB Load Low Running this You can run this
Software command will load command to load a
Package a software package new version only after
to the system. downloading the new
version.

SAV Save Mediu Running this Exercise caution when

RUNNINGCONFIG
DB Running m command will lock running this command
Configuratio the system, with the assistance of
ns causing a failure to Huawei technical
run any support engineers.
configuration
command.
Configuration can
be properly
performed after
this command is
run.

RBK PACKAGEDB Perform Mediu Running this This command can be

Rollback m command will roll run only after the
back an upgrade. If system is upgraded.
cold patches and
basic versions are
involved, the
system will be
restarted.

OPR Run Patch in Low Running this Exercise caution when

PATCHRUNDB
One-click command will running this command
Mode activate or delete with the assistance of
system patches. If
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

cold patches are Huawei technical

involved, the support engineers.
system will restart.

DEC VMDB Decrease Mediu Running this Exercise caution when

RUs on VM m command will running this command
cause RU with the assistance of
configurations to Huawei technical
be removed from support engineers.
VMs.
This command
must be used
together with UAS
VNFCVM. Run DEC
VMDB to clear RU
configuration data
and then UAS
VNFCVM to clear
VM configuration
data.

STR Start CSDB Mediu It takes a long Exercise caution when

DBREBALANCE
Data m period of time to running this command
Balancing run this command. with the assistance of
Huawei technical
support engineers.

RMV PLGPKGDB Remove Plug Low Deleting a cold Exercise caution when
Package plug package will running this
restart the system. command.

ACT PLGPKGDB Activate Plug Low Activating a cold Exercise caution when
Package plug package will running this
restart the system. command.

RMV MGW Remove High Deleting an MGW This command is

Media will result in intended for use
Gateway system errors and during data
service commissioning in site
unavailability. deployment. Do not
use this command
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

during routine
maintenance.

MOD MGW Modify High Changing Host This command is

MGW name of an MGW intended for use
Function causes license during data
Entity expiration and is a commissioning in site
risky operation. deployment. Do not
use this command
during routine
maintenance.

CLR Check VM High Running this Exercise caution when

VMCFGINSBIND
and command may running this command
Configuratio cause service loss and contact Huawei
n Instance and have a great technical support
Binding impact on services. engineers for
Information assistance.

RMV BCPLC Remove High Running this Exercise caution when

Bearer command may running this command
Control cause service loss and contact Huawei
Policy and have a great technical support
impact on services. engineers for
assistance.

DEA H248LNK Deactivate High Deactivating an This is an internal

H.248 Link H.248 link is highly command and cannot
risky and may be executed on the
result in service HUAWEI
interruption. Operation&Maintena
nce System.

MOD SRS Modify SRS Mediu Running this Exercise caution when
Parameters m command may running this command
cause severe and contact Huawei
errors. technical support
engineers for
assistance.

MOD SRSG Modify SRS Mediu Running this Exercise caution when
Group m command may running this command
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

cause severe and contact Huawei

errors. technical support
engineers for
assistance.

MOD BGF Modify BGF High Changing Host This command is

Function name of a BGF intended for use
Entity entity is highly during data
risky and may commissioning in site
cause the license deployment. Do not
to become invalid. use this command
during routine
maintenance.

SET ARPPARA Set ARP High Running this Exercise caution when
Parameter command may running this command
cause failures in and contact Huawei
accessing some technical support
nodes. engineers for
assistance.

ADD ACLRULE Add an ACL High Running this Exercise caution when
Rule command may running this
cause packets command.
matching the ACL
rules to be
discarded.

RMV ACLRULE Remove ACL High Running this Exercise caution when
Rule command may running this
affect ongoing command.
services.

ADD IFTRFPOLICY Add a Traffic High After this Exercise caution when
Policy Group command is running this
for an executed, the command.
Interface configured traffic
policies take effect
and ongoing
services may be
affected.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

ADD TRFPOLICY Add a Traffic High Running this Exercise caution when
Policy command may running this
affect ongoing command.
services.

RMV TRFPOLICY Remove a High Running this Exercise caution when

Traffic Policy command may running this
affect ongoing command.
services.

MOD TRFPOLICY Modify a High Running this Exercise caution when

Traffic Policy command may running this
affect ongoing command.
services.

RMV ARP Remove High Running this Exercise caution when

Static ARP command will clear running this
Entry the mapping command.
between an IP
address and a MAC
address, which
may cause failures
in accessing nodes.

MOD SUBIF Modify a High Changing the VLAN Exercise caution when
Subinterface ID of a sub- running this
interface may command.
cause failures in
accessing nodes.

MOD IKEPEER Modify an High Running this Exercise caution when

IKE Peer command may running this
affect ongoing command.
services.

MOD IPSECPSL Modify IPSec High Running this Exercise caution when
Policy command may running this
affect ongoing command.
services.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

ADD IPSECPLCBD Add IPSec High After this Exercise caution when
Policy command is running this
Binding executed, the IPSec command.
security policy will
take effect, which
may affect ongoing
services.

RMV IPSECPLCBD Remove High After this Exercise caution when

IPSec Policy command is running this
Binding executed, the IPSec command.
security policy will
become invalid,
which may affect
ongoing services.

RMV IFIP Remove an High Running this Exercise caution when

Interface IP command may running this command
Address interrupt services and contact Huawei
from and to the IP technical support
addresses. engineers for
assistance.

SET IKELOCALID Set IKE Local High Setting the IKE Exercise caution when
ID local gateway running this command
name for an IPSec and contact Huawei
policy that is being technical support
used for an IP engineers for
address may cause assistance.
failures in
negotiating IPSec
policies and
establishing IPSec
channels.

ADD IPSECPLC Add IPSec High Running this Exercise caution when
Policy command may running this
affect ongoing command.
services.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

MOD IPSECPLC Modify IPSec High Modifying an IPSec Exercise caution when
Policy policy that is being running this
used for an IP command.
address may cause
failures in
negotiating IPSec
policies and
establishing IPSec
channels.

RMV IPSECPLC Remove High Removing an IPSec Exercise caution when

IPSec Policy policy that is being running this
used for an IP command.
address may cause
failures in
negotiating IPSec
policies and
establishing IPSec
channels.

RMV IPRT Remove a High Running this Exercise caution when

Static Route command may running this command
interrupt services and contact Huawei
over this route. technical support
engineers for
assistance.

CLR ARPPRB Clear ARP High After the ARP Exercise caution when
Probe probe-related running this command
Information statistics are and contact Huawei
cleared, the system technical support
clears the reported engineers for
ALM-125156 ARP assistance.
Probe Failure and
starts ARP again.

ADD IPRTBFDBD Add Binding High If the BFD session Exercise caution when
Between is DOWN, running running this command
Static Routes this command will and contact Huawei
and BFD deactivate the technical support
Sessions static route bound engineers for
assistance.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

with the BFD

session.

BLK BFDSESSION Block BFD High After this Exercise caution when
Local Session command is running this command
Managemen executed, the BFD and contact Huawei
t Status session stops technical support
Function sending packets to engineers for
the peer. assistance.

LOD CERT Load a High Running this Exercise caution when

Certificate command may running this
Group affect related command.
services.

RMV CERT Remove a High Running this Exercise caution when

Certificate command may running this
Group affect related command.
services.

RMV ARPPROXY Remove an High Running this Exercise caution when

ARP Proxy command will running this
remove the proxy command.
relationship
between a
specified interface
and a specified IP
address, which
may cause failures
in accessing nodes.

RMV NEIGHBOR Remove High Running this Exercise caution when

Static command will running this
Neighbor delete the mapping command.
between an IP
address and a MAC
address, which
may cause failures
in accessing nodes.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

SET NDPARA Set ND High Modifying ND Exercise caution when

Protocol protocol running this
Parameters parameters may command.
cause failures in
accessing nodes.

RST NDPARA Reset ND High Resetting ND Exercise caution when

protocol protocol running this
parameters parameters may command.
cause failures in
accessing nodes.

CLR NDPRB Clear ND High After the ND Exercise caution when

Probe probe-related running this
Information statistics are command.
cleared, the system
clears the reported
ALM-125173 IPv6
Neighbor Discovery
Probe Failure and
starts the ND
probe again.

RMV NDPROXY Remove an High Running this Exercise caution when

ND Proxy command will running this
remove the proxy command.
relationship
between a
specified interface
and a specified IP
address, which
may cause failures
in accessing the IP
address.

RST VM Reset Virtual High Running this Exercise caution when

Machine command may running this command
affect all services and contact Huawei
provided by the technical support
VM. After this engineers for
command is run assistance.
with Reset type set
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

to Forcibly reset,
some OS files may
be corrupted,
hindering
corresponding
processes from
being started.
Before resetting a
VM, run SWP
MODULE to switch
over the active and
standby VM and
ensure that the
load-sharing
service process is
running properly.

STP VM Stop Virtual High The VM stops Stop the VM during

Machine providing services off-peak hours, for
after it is stopped. example, between
Therefore, run midnight and early
SWP MODULE to morning. Exercise
switch over the caution when running
active module this command and
before stopping contact Huawei
the VM. technical support
engineers for
assistance.

STR VM Start Virtual High The system Exercise caution when

Machine interacts with the running this
Unified command.
Virtualization
Platform (UVP)
during the
execution of STR
VM. If the UVP
becomes faulty or
communication
with the UVP is
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

disconnected, STR
VM times out.

FMT VM Format High Running this Before running this

Virtual command will command, make sure
Machine cause the VM to be that the active and
reset and all files standby processes are
and data on this switched over or that
VM to be lost. Back the load-sharing
up data on a third- processes work in a
party device in normal assistant state.
advance. System Exercise caution when
exceptions may running this command
occur if this and contact Huawei
command is run technical support
with parameters engineers for
set to incorrect assistance.
values.

RMV OFI Remove High Running this Run this command

Local Office command is highly with caution during
Information risky and may off-peak hours and
interrupt services. contact Huawei
technical support
engineers for
assistance.

SET CCPARA Set High Running this Exercise caution when

Conference command is highly running this command
Resource risky. Services may and contact Huawei
Parameters be affected if this technical support
command is run engineers for
with parameters assistance.
set to incorrect
values.

RST CCPARA Restore High Running this Exercise caution when

Conference command is highly running this command
Resource risky. System and contact Huawei
Parameters operation may be technical support
affected if this engineers for
command is run assistance.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

with parameters
set to incorrect
values.

RMV M3LE Remove High Running this Exercise caution when

M3UA Local command is highly running this command
Entity risky and may and contact Huawei
interrupt services. technical support
engineers for
assistance.

RMV M3DE Remove High Running this Exercise caution when

M3UA command is highly running this command
Destination risky and may and contact Huawei
Entity interrupt services. technical support
engineers for
assistance.

RMV M3LNK Remove High Running this Exercise caution when

M3UA command is highly running this command
Signaling risky and may and contact Huawei
Link interrupt services. technical support
engineers for
assistance.

ACT M3LNK Act M3UA High Running this Exercise caution when
Signaling command is highly running this command
Link risky and may and contact Huawei
interrupt services. technical support
engineers for
assistance.

DEA M3LNK Deact M3UA High Running this Exercise caution when
Signaling command is highly running this command
Link risky and may and contact Huawei
interrupt services. technical support
engineers for
assistance.

RMV M3RT Remove High Running this Exercise caution when

M3UA Route command is highly running this command
and contact Huawei
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

risky and may technical support

interrupt services. engineers for
assistance.

RMV M3LKS Remove High Running this Exercise caution when

M3UA Link command is highly running this command
Set risky and may and contact Huawei
interrupt services. technical support
engineers for
assistance.

RMV NRIMSC Remove The High Running this Exercise caution when
Relation command is highly running this command
Between NRI risky and may and contact Huawei
And MSC result in severe technical support
errors. engineers for
assistance.

RMV CNNODE Remove High Running this Exercise caution when

CNNode command is highly running this command
risky and may and contact Huawei
interrupt services. technical support
engineers for
assistance.

REL M3LNK Release High Running this Exercise caution when

M3UA Link command is highly running this command
risky and may and contact Huawei
interrupt services. technical support
engineers for
assistance.

STP DBDUPCPY Stop High Running this Exercise caution when

Function of command is highly running this command
CSDB Replica risky. System and contact Huawei
Verification performance and technical support
and operation may be engineers for
Replication affected if this assistance.
command is run
with parameters
set to incorrect
values.
Table 1 Common risky MML commands on the CloudSE2980

Risk
Commands Function Risks Preventive Measures
Level

SET Set Elect High Running this This is an internal

ELECTSERVICEDB
Service command will command and cannot
Configuratio disable the be executed on the
n arbitration service. HUAWEI
After the Operation&Maintena
arbitration service nce System.
is disabled, split-
brain may occur in
the system.

ADD IPHABFDBD Add Binding High If the status of the Exercise caution when
Between BFD session bound running this command
Arbitration with the current and contact Huawei
and BFD active HRU is technical support
Session DOWN, running engineers for
this command may assistance.
cause a switchover
between the active
and standby HRUs.

RMV VMINFO Remove High Deleting VM Exercise caution when

Virtual information is running this command
Machine highly risky. If you and contact Huawei
Information delete VM technical support
information, VM engineers for
resources will fail assistance.
to be managed.

Parent Topic: Specifications for High-Risk Operations

< Previous topic

8.1.3 Risky MSC Server Commands

and Table2 describe the risky commands. The risk level High indicates that
Table 1
execution of the command will cause most services to fail, and the risk level Medium
indicates that execution of the command may cause some services to fail.
Contact Huawei technical support when using these risky commands.

Table 1 Risky commands that are forbidden without guidance

Product Name Command Category Risk Risk Description

Level

CloudSE2980 Commands MOD MMPRM/MOD High After any of these

that require MMSCVLR/MOD MSPC/SET commands is run,
module SCTPPARA modules must be
formatting reset (first
and resetting formatted and then
after the reset). Misoperation
command may cause service
execution interruption.

Global SET MKPIRULE/SET High Misoperation will

configuration MSRVGW/SET MQFCCFG/MOD cause global
MGBILLCTRL/ADD MAP/SET services and
MOFI/MOD MOFI/SET performance
MINOFFMSC/MOD measurement to
MINOFFMSC/MOD fail.
MMPRM/MOD MMSCVLR/MOD
MSPC/SET SCTPPARA

Table 2 Riskycommands that must be used only when necessary

Product Name Command Category Risk Level Risk Description

CloudSE2980 Commands SET MSSNSRV/SET Medium Commands for

that require MPOOLINFO/MOD configuring virtual
module MGSMSRV machines (VMs).
resetting
after the
command
execution

Global MOD MSEGSTATE/RMV Medium Commands for

configuration MMASI/SET configuring virtual
MMAPACCFG/SET machines (VMs).
MMAPPARA/MOD
MMSFP/MOD
MMGW/MOD
MVLRCFG/MOD
MMHPREFIX/RMV
MMHPREFIX/MOD
 Table 2 Riskycommands that must be used only when necessary

Product Name Command Category Risk Level Risk Description

MMHSUFFIX/RMV
MMHSUFFIX/RMV
MMHMSCCFG/RMV
MMHLAICFG/MOD
MAUTHCFG/MOD
MIMSIGT/RMV
MIMSIGT/MOD
MLAIGCI/RMV MGSMSRV

Parent Topic: Specifications for High-Risk Operations

< Previous topic

8.2 Performance Management

Description
Performance Management Principles
Logging In to the Performance Management System
GUIs
Measurement Management
Querying Measurement Results
Exporting Measurement Results
Setting Thresholds
Customizing Measurement Entities

Parent Topic: Routine Maintenance

< Previous topic

8.2.1 Performance Management

Principles
 Purpose

 Objects

 Principles

 Deletion of Performance Measurements from the OMU Database

 Scheduled Scanning and Deletion Principles

Purpose

Performance management provides carriers with the ability to evaluate the overall
performance of their networks and the performance of individual network elements,
and the ability to optimize network performance. Performance management
includes:
 Monitoring network running and service quality
 Identifying network congestion or interruption in a timely manner
 Removing faults
 Planning network capacity and allocating network resources effectively
 Optimizing network performance indicators

Objects

A measurement task has specific measurement objects, measurement counters,

measurement periods, and measurement units.

Principles
Figure 1 Overall architecture of the performance measurement system for the virtual
ME layer
Figure 2 Detailed architecture of the performance measurement system for the
virtual ME layer

PCDR performance call detail record

 Threshold Threshold types include:
types  Threshold alarm: Thresholds are set for performance measurement
entities. When the actual value of an entity exceeds the threshold, a
threshold alarm is generated.
 Gradient alarm: Thresholds are set for the change rate of
performance measurement entities. When the actual change rate
of an entity exceeds the threshold, a gradient alarm is generated.

Deletion of Performance Measurements from the OMU Database

The system deletes the performance measurements from the OMU database when
either of the following conditions is met:
 The performance measurements have been saved for 60 days.
 The size of the table saving the performance measurements has reached 10 GB.

Scheduled Scanning and Deletion Principles

The system scans performance measurement files at regular intervals and deletes
files to free up system memory. Table 1 details the scanning and deletion principles.

Table 1 Scheduled scanning and deletion principles

Directory Function Size Scan Deletio Stora Deletion

Period n ge Mechanism
Percent Perio
age d
(Day
s)

/omu/share/exp Saves the original 50 8 50% N/A After the

ort/pm/PCDR performance call detail 0 minu scanning
records (PCDRs). These MB tes period
PCDRs are used to elapses, the
locate the incorrect system
measurement results checks the
during routine period files
maintenance. are kept
first and
/omu/share/exp Saves the performance 10 30 5% N/A then the
ort/pm/perf_res measurement result 0 minu size of files
ult files of the OSS when MB tes and then
the OMU is connected determine
to the OSS incorrectly.
Table 1 Scheduled scanning and deletion principles

Directory Function Size Scan Deletio Stora Deletion

Period n ge Mechanism
Percent Perio
age d
(Day
s)

/omu/share/exp Saves the result files 15 30 20% 15 whether to

ort/pm/perf_exp exported immediately 0 minu delete
ort_result or periodically. MB tes these files.
 If some
/omu/share/exp Saves call history 51 1 15% 30 files in a
ort/pm/CHR records (CHRs). 20 minu directory
MB te have
been
kept
over the
specified
storage
period,
the
system
deletes
these
files.
 If the
size of
files
exceeds
that of
the
correspo
nding
directory
, the
system
deletes
the files
based on
deletion
percenta
ge.
 For one
scanning
Table 1 Scheduled scanning and deletion principles

Directory Function Size Scan Deletio Stora Deletion

Period n ge Mechanism
Percent Perio
age d
(Day
s)

period,
the
system
deletes
the files
only
based on
the size
or the
period
the files
are kept.

NOTE:
 Deletion
percentage
measures
the
number of
deleted
files, not
the space
occupied
by these
files.
 If the
system
deletes a
large
number of
files at one
time, the
CPU usage
will
become
high. This
affects the
proper
running of
the
system.
Therefore,
 Table 1 Scheduled scanning and deletion principles

Directory Function Size Scan Deletio Stora Deletion

Period n ge Mechanism
Percent Perio
age d
(Day
s)

the system
only
deletes a
part of the
total
number of
the files at
one time if
the size of
the files
exceeds
that of the
correspon
ding
directory.

Parent Topic: Performance Management Description

8.2.2 Logging In to the Performance

Management System
 Prerequisite

 Procedure

Prerequisite

Conditions
 The Internet Explorer is set as described in Setting up Internet Explorer.
 You have installed SSL certificates as instructed in Configuring a Digital Certificate
(Web Authenticates the Peer) and Configuring a Digital Certificate (Web Does
Not Authenticate the Peer) before using Internet Explorer to log in to the WebUI
of the OMU server for the first time.
 You have permission for at least one of the following CGP command groups:
  G_1: Administrator-level command group
 G_2: Operator-level command group
 G_3: User-level command group
 G_10: Performance query command group
 G_11: Performance management command group
Otherwise, Performance Management System is unavailable.
Data
 You have obtained the floating IP address of the OMU server.
 You have obtained a user name and its password and type from an administrator.

 If the OMU floating IP address is an IPv4 address, enter [Link] IP

address:port number/ (for example, [Link]
 If the OMU floating IP address is an IPv6 address, enter [Link] IP
address]:port/ (for example, [Link] in the address box of
your browser. The IPv6 floating IP address must be included in square brackets.
 This section takes an IPv4 floating address as an example.

Procedure

1. Open the browser, enter [Link] IP address of the OMU server:port

number in the address box, and press Enter. On the login page, enter the user
name and password, select the user type, and click Login.

NOTE:
 The user name is case insensitive.
 You can click Reset to obtain the most recent user name and clear the password.

2. In the HUAWEI Operation & Maintenance System, click Performance

Management System to open its main page.
 Figure 1 Main page of the performance management system

Parent Topic: Performance Management Description

< Previous topic

8.2.3 GUIs
The performance management system provides graphic user interfaces (GUIs) for
you to query performance measurements. Figure 1 shows the main page of the
performance management system.
Figure 1 Main page of the performance management system
Figure 2 illustrates the performance management process.
Figure 2 Performance management process

Parent Topic: Performance Management Description

 < Previous topic

8.2.4 Measurement Management

 Creating a Measurement Task

 Deleting a Measurement Task

Creating a Measurement Task

Scenarios
The system automatically starts measuring commonly-used performance
measurement units after the OMU is started. The commonly-used performance
measurement units are provided by device vendors.
If you want to obtain other performance measurement data, create a performance
measurement task. This section takes an IP traffic measurement task as an example.
Impact on the System

After a performance measurement task is started, the system continuously collects

performance measurement data, which consumes system resources. Running a large
number of performance measurement tasks concurrently may cause the system to
respond slowly to bearer service requests. To prevent any adverse impacts, observe
the following rules:
 Create performance measurement tasks only when required. Delete performance
measurement tasks when they are not needed any more. For details about how
to delete a performance measurement task, see Deleting a Measurement Task.
 Do not set the measurement period too short. It is recommended that you set the
measurement period to 1 hour.
Procedure
1. Click Measurement on the menu bar. Double-click IP Traffic Measurement. Set
the measurement period in the Measurement page displayed.
2. Add, delete, or query measurement objects (configuration objects or customized
objects) on the Measurement Object page.

You do not need to add default measurement objects and global measurement objects
when creating measurement tasks.
Deleting a Measurement Task

Scenarios
Delete a performance measurement task if it is not needed any more.
Deleting an IP traffic measurement task is taken as an example.
Impact on the System
The system does not check whether the preset thresholds are reached after
measurement tasks are deleted.
Procedure
1. Click Measurement on the menu bar. Double-click IP Traffic Measurement. The
Measurement page is displayed.
2. Deselect the measurement period for IP Traffic Measurement in the
Measurement Unit/Period pane delete the measurement task.

Parent Topic: Performance Management Description

< Previous topic

8.2.5 Querying Measurement Results

 Scenarios

 Impact on the System

 Procedure

Scenarios
 You can set search criteria and query performance measurements based on the
search criteria. Querying Performance Measurement of Virtual Machine Memory is
taken as an example.

Impact on the System

After you add, delete, or modify customized measurement entities or measurement

objects, double-click the measurement units to reload the query pages and refresh
the measurement task information.

Procedure

1. Click Query on the menu bar. Double-click Performance Measurement of

Virtual Machine Memory. The Query page is displayed.

2. Set search criteria to query measurement results.

The system can display a maximum of 10,800 records at a time. "--" indicates
performance indicators that the VNFC does not support.
 Continuity

Segment

3. Check the measurement results about 10 minutes after the measurement period
ends.

The performance measurement results in a maximum of 300 measurement periods can

be displayed in a graph.
 Parent Topic: Performance Management Description

< Previous topic

8.2.6 Exporting Measurement Results

 Scenarios

 Impact on the System

 Procedure

Scenarios
 The measurement results collected 60 days ago are overwritten by the latest
measurement results. You can export measurement results from the OMU to a local
PC in a timely manner to prevent loss of data.
Exporting the IP traffic measurement results is taken as an example.

Impact on the System

Exporting measurement results consumes a lot of CPU resources and memory

resources. One measurement result export task is recommended at a time.
The system exports performance measurement results at 2:07 in the early morning
by default. If multiple scheduled export tasks are implemented and a large amount
of data is exported, the CPU usage and memory usage of the system will be high in a
short period of time.

Procedure

1. Click Export on the menu bar. Double-click IP Traffic Measurement. The Export
page is displayed.

A maximum of 40,000 records can be saved.

4294967295 in the measurement result indicates unsupported performance counters.

2. Set parameters and click Submit to export measurement results to the

<Exported file name>/pm/perf_export_result/ directory of the OMU.

Scheduled Exports measurement results of a specified period of time at a scheduled time.

Export For example, you can create a scheduled export task to enable the system to
automatically export the CPU usage of the period from 10:00 through 12:00
to a specified directory at 02:07 in the early morning. The system takes
about 10 minutes to export the CPU usage.
 3. Log in to the Huawei Operation & Maintenance System, and use the FTP tool to
export measurement results to the local PC.

Parent Topic: Performance Management Description

< Previous topic

8.2.7 Setting Thresholds

 Scenarios

 Impact on the System

  Principles

 Procedure

Scenarios

You can set a threshold for a measurement entity. When the threshold is reached,
the system automatically reports an alarm, reminding you of performance
deterioration, which may be caused by faults hidden in devices or inappropriate
adjustment of networks.
Setting thresholds for IP traffic measurement is taken as an example.

Impact on the System

For non-default objects and automatic scalable objects, if the measurement objects
of the threshold alarm are deleted, the threshold will be deleted automatically.

Principles

Observe the following principles when you set or change the threshold for a
measurement entity:
 Do not set thresholds for customized measurement entities.
 Create a threshold alarm task and a gradient alarm task for the same
measurement entity of the same type of measurement object of a managed
element (ME).
 Adjust thresholds based on customer requirements or the historical data of live
networks.
 Adjust thresholds based on the historical data of regions or cities. The
measurement indicators of the same region or city are relatively stable, but the
measurement indicators of different regions or cities may vary.
 Update the thresholds for voice traffic and data traffic monthly based on the
traffic changes. You can set thresholds based on the lowest traffic, but you may
miss detecting peak-traffic hours.
 Define the midnight based on the traffic at sites. You can also define different
daytime and nighttime for voice service and data service.
 Set multiple thresholds and alarm severities for a key performance indicator (KPI)
if necessary. For example, you can configure the system to report a major alarm
when the S-CSCF registration success rate reaches 90%, and report a critical alarm
when the S-CSCF registration success rate falls to 80%.
 Set thresholds for KPIs pertaining to sessions, registrations, and network statuses,
for example, initial registration success rate, network connection success rate,
and network interruption rate.
 Set thresholds for resources, such as the resources required for processing
network traffic, and set thresholds for the capacity of network devices.
  Do not set thresholds for the measurement entities that are counted by the
number of times. You can check the change of such measurement entities using a
visualization tool. You can compare the values of the same day or the same time
segment during a certain period of time.

Procedure

1. Click Threshold Setting on the menu bar. Double-click IP Traffic Measurement.

The Threshold Setting page is displayed.
2. Click Add on the Threshold Setting page. Add a threshold in the ADD Alarm
dialog box.
3. You can also select a threshold and modify or delete the threshold on the
Threshold Setting page.
 Parent Topic: Performance Management Description

< Previous topic

8.2.8 Customizing Measurement Entities

 Scenarios

 Impact on the System

 Principles

 Procedure

Scenarios

You can customize measurement entities using the four fundamental operations of
arithmetic if the existing measurement entities in the performance management
system cannot satisfy your requirements. You can create tasks to monitor your
customized measurement entities.
Customizing measurement entities for IP traffic measurement is taken as an
example.

Impact on the System

The formula for calculating a customized measurement entity cannot exceed 128
characters in length, and the value for each parameter and measurement entity in
the formula must be within the range of 0 to 2147483647. If the base figure for
calculation is too large, the value of the customized measurement entity may exceed
the value range. If so, querying the database fails.
A measurement unit can have a maximum of 50 customized measurement entities.
Otherwise, system performance deteriorates.

Principles

Observe the following principles when customizing a measurement entity:

 Add a customized measurement entity to the measurement unit of the original
measurement entity.
  Do not use a customized measurement entity to compute other customized
measurement entities.
 The original measurement entity is measured when its customized measurement
entity is measured.
 The measurement of the original measurement entity does not stop even if the
measurement of its customized measurement entity stops.
 Do not stop measuring the original measurement entity if its customized
measurement entity is being measured.
 You can leave the measurement entity ID unspecified when you import
customized performance entities. The system determines whether a
measurement entity exists based on the entity name and formula.
 If measurement entities have the same name but different formula, the system
reminds you of changing the entity name.
 Do not set the name of a customized measurement entity to be the same as the
name of the original measurement entity or other customized measurement
entities of the same measurement unit. Otherwise, the system reminds you of
changing the entity name. The measurement entities of different measurement
units can have the same name.

Procedure

1. Click Customized Entity on the menu bar. Double-click IP Traffic Measurement.

The Customized Entity page is displayed.
2. Click Add on the Add Customized Entity page to add customized entities.
3. You can also select a customized entity and use the buttons displayed to modify,
delete, or query the customized entity.
 Parent Topic: Performance Management Description

< Previous topic

8.3 KPI Monitoring

KPI Monitoring
Logging In to the Performance Managment System
Real-Time Monitoring
Monitoring History

Parent Topic: Routine Maintenance

< Previous topic

8.3.1 KPI Monitoring

 Purposes

 Objects

 KPI Monitoring Principles

 Principles for Saving KPI Monitoring Result in the OMU Database

 Principles for Scheduled Scanning and Deletion of KPI Monitoring-related Files on the OMU System

Purposes

Carriers monitor the key performance indicators (KPIs) of devices and perform
operations based on the monitoring results to ensure system reliability. When the
value of a KPI, such as the call success rate, reaches a preset threshold, the system
reports an alarm to notify carriers of the abnormality. In some cases, the system
automatically demarcates or locates faults and recovers services.

Objects

The objects to be monitored include:

  Measurement objects: A measurement object can be an ME, a process, or an
office direction.
 Measurement units: A measurement unit is a collection of a type of KPI, such as I-
CSCF SIP Message Measurement.
 KPIs: A KPI, such as Number of I-CSCF Initial Invite Requests Received, indicates
the performance value of an object at a certain time point.

KPI Monitoring Principles

Figure 1 KPI monitoring principles

Principles for Saving KPI Monitoring Result in the OMU Database

The system stores at most 2 GB KPI monitoring results generated within the latest
seven days. Specifically:

The seven-day period starts backwards from yesterday. For example, if the current day is the
21th day in a month, the seven-day period starts backwards from the 20th day to the 14th
day in this month.

 The system does not save the KPI monitoring results generated within the days
earlier than the seven-day period.
 When the system checks that the KPI monitoring results generated within a
seven-day period occupy more than 90% of the hard disk space, it deletes the KPI
 monitoring results for the earliest day. The system repeats this operation until the
results occupy less than 90% of the hard disk space.

Principles for Scheduled Scanning and Deletion of KPI Monitoring-related Files on the OMU System

The system regularly scans KPI monitoring-related files and deletes files to free up
system memory. Table 1 details the scanning and deletion principles.

Table 1 Scheduled scanning and deletion principles

Directory Function Siz Scan Savi Deletion

e Peri ng Mechanism
(M od Tim
B) (min e
) (min
)

/opt/HUAWEI/cgp/workshop/omu/share/e Stores the 10 30 N/A If the

xport/kpi/PCDR performa 0 performa
nce nce
measure measure
ment data ment data
reported in this
by MEs directory
and exceeds
calculates 100 MB,
KPI the OMU
values. removes
The the data
performa saved at
nce the
measure previous
ment data day. If the
is stored data still
in exceeds
separate 100 MB,
folder by the OMU
days. removes
the data
saved at
the day
before
the
previous
day. The
OMU
keeps
Table 1 Scheduled scanning and deletion principles

Directory Function Siz Scan Savi Deletion

e Peri ng Mechanism
(M od Tim
B) (min e
) (min
)

deleting
performa
nce
measure
ment data
in this
way until
the size of
the data
becomes
less than
100 MB.

/opt/HUAWEI/cgp/workshop/omu/worksp Saves the N/ 1 1 Every

ace[workspace temporar A other
ID]/server/3rdTools/apache2/htdocs/cgp/k y minute,
pi/download performa the OMU
nce scans the
NOTE: measure performa
To query the workspace ID, run LST WKSP. ment files nce
after measure
users click ment files
Save and
when deletes
querying the
the KPI performa
monitorin nce
g history. measure
ment files
saved in
the
previous
minute.

Parent Topic: KPI Monitoring

 8.3.2 Logging In to the Performance
Managment System
 Prerequisite

 Procedure

Prerequisite

Conditions

 Internet Explorer 11.0 or later has been installed on your PC and the browse
settings have fulfilled the requirements. For details on browser setting, see Setting
up Internet Explorer.

 SSL certificates have been installed as described in Configuring a Digital Certificate (Web
Authenticates the Peer) and Configuring a Digital Certificate (Web Does Not Authenticate the Peer)
before you log in to the WebUI of the OMU server for the first time using Internet
Explorer.
 You have the permissions on the CGP commands in the G_1 group. Otherwise, KPI
Monitoring on the WebUI is dimmed.
Data
 You have obtained the floating IP address of the OMU server.
 You have obtained a user name, password, and user type from an administrator.
For details about the default user name and password, see Default OMU
Accounts.

 If the OMU floating IP address is an IPv4 address, enter [Link] IP

address:port number/ (for example, [Link]
 If the OMU floating IP address is an IPv6 address, the IPv6 address must be included in
square brackets. In this situation, enter [Link] IP address]:port/ (for
example, [Link] in the address box of your browser.
 This section takes an IPv4 floating address as an example.

Procedure

1. Open the browser, enter [Link] IP address of the OMU server:port

number/ in the address box, and press Enter. On the login page, enter the user
name and password, select the user type, and click Login.

NOTE:
 The user name is case insensitive.
  You can click Reset to set the user name to the most recent one and to clear the
password.

2. On HUAWEI Operation & Maintenance System, click KPI Monitoring System.

The KPI Monitoring System window is displayed, as illustrated in Figure 1.
Figure 1 KPI Monitoring System window

Parent Topic: KPI Monitoring

< Previous topic

8.3.3 Real-Time Monitoring

 Scenarios

 Procedure

Scenarios

Query the monitoring results of all KPIs in a specific measurement unit for a type of
measurement object in real time.
Procedure

1. In the navigation tree, select the desired measurement object type.

2. On the right pane, select a measurement unit.
3. Click Details. The curve illustrating real-time KPIs are displayed.
4. If a user has subscribed to the KPI which is being monitored in real time, the
threshold in the subscription message SUBS_DATA will be displayed on the Real-
Time Monitoring tab page.

Parent Topic: KPI Monitoring

< Previous topic

8.3.4 Monitoring History

 Scenarios

 Procedure

Scenarios

Query historical KPI monitoring results.

Procedure

1. In the navigation tree, select the desired measurement object type.

2. On the right pane, specify Dates between which historical KPIs are to be queried.
3. Select a measurement unit.
4. Select a measurement object.
5. Click Query.

The system can display a maximum of 10,000 records at a time.

Parent Topic: KPI Monitoring

< Previous topic