Washing Machine Error Codes:

Error codes for LG washing machines: Front load and top load

DOES NOT ENTER THE

NO INLET WATER
CHECK THE WATER INLET
IT DOES NOT WORK THECHECK THE DRAIN HOSE AND
OE DRAIN FILTER
WATER LEVEL
FE CONSULT A TECHNICAL SERVICE
ERRONEOUS
PRESSURE SWITCH
PE BAD
CONSULT A TECHNICAL SERVICE

dE OPEN DOOR CLOSE THE DOOR

CLOTHING CAN BE LOADED FOR ONE ONLY
INBALANCE NO CENTRIFUGE
SIDE
DOES NOT HEAT UP
EE BAD RESISTANCE
WATER
ERROR IN THE
THE CHECK THE ENGINE
MOTOR
ERROR IN THE
the DEHUMIDIFIER
BAD FAN OR HEATER
FAIL IN THE
IE SUPPLY OF CHECK THE WATER INLET
WATER
FAILURE IN THE CHECK THAT THE LOAD OF CLOTHES IS
EU
CENTRIFUGED BALANCED
LEVEL OF
AE POWER CONSULT A TECHNICAL SERVICE
ABNORMAL

CODIGOS DE ERROR LAVADORA DAEWOO CARGA SUPERIOR

DOES NOT ENTER THE

IE CHECK THE WATER INLET
WATER
THEWASHINGMACHINE

OE DOES NOT EVACUATE THE DRAIN

ERROR, PLEASE CHECK THE
DRAIN HOSE
WATER
THEWASHINGMACHINE
CHECK THAT THE CLOTHING IS NOT
EU NO
LOADED ON ONE SIDE
CENTRIFUGE
NO
THE OPEN DOOR
Centrifuge
NO
PFE CENTRIFUGE CHECK THE DRAIN FILTER
GOOD
CODIGOS DE ERROR LAVADORA DAEWOO: CARGA FRONTAL

PROBLEM CODE SOLUTION

DOES NOT ENTER
IE CHECK THE WATER INLET
WATER
DO NOT THROW IT CHECK THE FILTER AND HOSE OF
OE
WATER DRAINAGE
NO SEE THAT THE RORA IS NOT THERE
EU
MOUNTED CENTRIFUGE FOR ONE SIDE
NO
THE CLOSE THE DOOR
CENTRIFUGE
NO
CHECK THE DRAIN HOSE AND
PFE CENTRIFUGE
FILTER
GOOD

CODIGOS DE ERROR LAVADORA SAMSUNG:CARGA FRONTAL

DOES NOT ENTER THE

IE CHECK THE WATER INLET
WATER
DO NOT THROW IT OUT CHECK THE DRAIN HOSE
OE
WATER THAT IT IS NOT OBSTRUCTED
NO CHECK THAT THE CLOTHES ARE NOT
EU
Centrifuge loaded only on one side of the drum
THECOVERISHERE
EU CLOSE THE LID
OPEN

SAMSUNG TOP LOAD WASHER ERROR CODES

CODE PROBLEM CHECK

DOOR
dE CLOSE THE DOOR
OPEN
CHECK THAT THE CLOTHING IS
NO
EU DISTRIBUTED UNIFORMLY
CENTRIFUGE
INSIDE THE DRUM
DO NOT THROW IT CHECK THAT THE HOSE OF
5E
WATER DRAIN NOT BLOCKED
DOES NOT ENTER
4E CHECK THE WATER INLET
WATER
IT OVERFLOWS
IE CONSULT A TECHNICAL SERVICE
THE WATER
OVERFLOW
OE CONSULT A TECHNICAL SERVICE
THE WATER

ERROR CODES ELECTROLUX TOP LOAD WASHER

WASHERS MODELS:
EWLI065OFDIWT
EWLI065OFDIGT
EWLI062OFDIWT
EWLI062OFDIGT
EWLI066OFDIWT
EWLI066OFDIGT
EWLI075OFDIWT
EWLI075OFDIGT
EWLI072OFDIWT
EWLI072OFDIGT
EWLI076OFDIWT
EWLI076OFDIGT
EWLI095OFDIWT
EWLI095OFDIGT
EWLI092OFDIWT
EWLI092OFDIGT
EWLI096OFDIWT
EWLI096OFDIGT

CODIGOS PROBLEMA POSIBLE SOLUCION

DOES NOT ENTER
E1 CHECK THE WATER INLET
WATER
DO NOT THROW AWAY THE CHECK THAT THE HOSE OF
E2
WATER DRAIN NOT BLOCKED
NO CHECK THAT THE CLOTHES ARE NOT FOR A
E3
Centrifuge on one side
NO
E4 CLOSE THE DOOR
CENTRIFUGE
THE BELL CHECK IF THE CHILDREN'S INSURANCE IS IN PLACE
E5 CONTINUE
ADJUSTED
DREAMING
EA CONSULT A TECHNICAL SERVICE
EC CONSULT A TECHNICAL SERVICE
MABE WASHER ERROR CODES

SCREEN CODE CAUSE OF THE FAILURE

THE WATER THAT ENTERS THE DEVICE

ALARM OF
EI TAKES MORE THAN 16 MINUTES IN
Filling
REACH THE SCHEDULED LEVEL
ALARM OF
OPENED THE LID WHILE
E2 OPENING OF
SPINNING
DOOR
ALARM OF
E3 UNBALANCING ADJUST THE CLOTHES IN THE DRUM
FROM THE LOAD
THE WASHING MACHINE HAS NOT FINISHED
ALARM OF
E4 WITH THE DRAINAGE AFTER 4
DRAINAGE
MINUTES

CODIGO DE ERROR LAVADORA FRIGIDAIRE CARGA SUPERIOR

FWAC16H4MSGK(W,S)
FWAC16H4MSMK(W,S)

PROBLEM CODES POSSIBLE SOLUTION

DOES NOT ENTER
E1 CHECK WATER INLET
WATER
NO BOOT
E2 CHECK THE DRAIN HOSE
WATER
NO CHECK THE DOOR, IT MAY BE WRONG
E3
CLOSED CENTRIFUGE
NO MAKE SURE THE CLOTHING IS NOT
E4
SINGLE-SIDED AMOUNTED CENTRIFUGE
PRESSURE SWITCH
F8 CONSULT A TECHNICAL SERVICE
BAD
FAILURE
F6 CONSULT A TECHNICAL SERVICE
ELECTRICAL
THE ALARM
FROM THE WORK
FROM THE
Fd CHECK THE LID'S STRAP
DOOR THIS
DEFECTIVE
A

GENERAL ELECTRIC WSLP1500 WASHING MACHINE

WSLS1500 •
 PROBLEM CODES POSSIBLE SOLUTION
IE IT DOESN'T WORK, I CALLED A TECHNICAL SERVICE

DOES NOT ENTER CHECK THAT THE KEY IS

FF OPEN THAT THE HOSE DOES NOT
WATER
THIS IS BENT
DO NOT THROW IT OUT CHECK THAT THE HOSE DOES NOT
dr
WATER THIS IS BENT OR POORLY CONNECTED
PUT THE CLOTHES BACK
NO
Ub UNIFORMLY AND CONTROL THAT
CENTRIFUGE
THE WASHER IS BALANCED
The OPEN LID CLOSE THE LID
CHECK THE CONNECTION OF THE
THE LEAKS WATER
DRAINAGE HOSE
THE WASHING MACHINE HAS A BAD PRESSURE SWITCH CALL
OE
OVERFLOWS TECHNICAL SERVICE

STOVE ERROR CODES: BARTOLINI- IMT- AIRTEK- CALMA

CODES

PROBLEM CODES POSSIBLE SOLUTION

THERE IS NO FLAME IN SENSOR TURN OFF TURN ON (THE
EO FROM THE CALL STOVE RESTARTS
FALSE ERROR OF LLAMA
E1 CIRCUIT OF TURN OFF TURN ON
FUEL
FLARE IN THE
E2 TURN OFF TURN ON
FUNCTIONING
FLAMES IN THE
E4 TURN OFF TURN ON
OPERATION
TEMPERATURE OF
E5 TURN OFF TURN ON
LOW BURNER
TEMPERATURE OF TURN OFF TURN ON OF
E6
HIGHLY COMBUSTIBLE NEW
FAN FLOW TURN OFF ON
E7
ABNORMAL NEW
INCLINATION SYSTEM
E9 TURN OFF TURN ON
ACTIVATED
THE TEMPERATURE OF
APAGUE ENCIENDA DE
EA FUEL GREATER THAN
NEW
35 DEGREES
THE TEMPERATURE
EH TURN OFF TURN ON
SUPERIOR IS VERY TALL
 THE TEMPERATURE OF
EP FUEL IS VERY TURN OFF TURN ON
LOW

CORONA FH 3003 FH 500

CORONA STOVE FH 3003 FH5005 FH 6003 FH 5006

REMOVE THE WATER AND THE DIRTY

THE STOVE IS OFF DEL, PUNCH AND FIXED DEPOSIT AND
EO ON OR DURING TRY AGAIN. IF NOT EITHER
THE OPERATION IT WORKS TO ATTEND A SERVICE
TECHNICIAN
LEVEL PROBLEM
Needs a repair
E1 THE ELEMENTS
RECUR TO A TECHNICAL SERVICE
ELECTRICAL
REMOVE THE WATER AND DIRT
THE STOVE IS TURNED OFF DEL, PUNCH AND FIXED DEPOSIT AND
E2 ON OR DURING TRY AGAIN. IF NOT EITHER
THE OPERATION IT WORKS TO ATTEND A SERVICE
TECHNICIAN
REMOVE THE WATER AND THE DIRT
THE STOVE IS ON DEL,PUNCH AND FIXED DEPOSIT
E4 TURNED ON OR DURING AND TRY AGAIN. IF
THE FUNCTIONING IT DOES NOT WORK TO ATTEND YET
TECHNICAL SERVICE
LEVEL PROBLEM
NEEDS A REPAIR
E5 THE ELEMENTS
.RECUR TO A TECHNICAL SERVICE
ELECTRICAL
LEVEL PROBLEM
Needs a repair
E6 THE ELEMENTS
RECUR TO A TECHNICAL SERVICE
ELECTRICAL
LEVEL PROBLEM
NEEDS A REPAIR
E7 THE ELEMENTS
RESORT TO A TECHNICAL SERVICE
ELECTRICS
THE SENSOR OF
E9 MOVEMENT IS A APAGUE ENCIENDA
ACTIVATED
REMOVE IF SOMETHING OBSTRUCTS THE
POWER CUT OR
FRONT PART OF THE
THE SYSTEM OF
EH STOVE, CHECK THE ENTRY
OVERHEATING
HAS BEEN ACTIVATED
FROM AIR (FAN) I WAIT FOR YOU
IF IT COOLS DOWN, TURN IT BACK ON

FENSA FHK 950 FHK 990 STOVE

 CAUSE (MEASURING DEVICE THAT MUST
CODE
SECURITY TO TAKE
THE STOVE STOPS
FUNCTION CONNECT FROM
AUTOMATICALLY TO SAFE WAY AND
------------
CAUSE OF A BUTTON PRESS CUT
CURRENT OR OF A ON/OFF
FAULTY CONNECTION
MAKE SURE THAT NOT
AN EARTHQUAKE
THERE IS PRODUCT
(MAGNITUDE OF A 5 OR)
INFLAMMABLE
MORE) VERY VIBRATIONS
AROUND THE
STRONG OR A COLLISION STOVE THAT DOES NOT EXIST
E01 HAVE PROVOKED THE
DAMAGE OR LEAK OF
AUTOMATIC STOP
[Link]
FROM THE STOVE( THE
AGAIN THE
ANTI-SHOCK SYSTEM A
ON BUTTON
FUNCTIONED
OFF
THE STOVE HAS LEFT
TO FUNCTION
AUTOMATICALLY REMOVE THE WATER AND
AFTER A THE DUST OF
FAILURE OF FIXED DEPOSIT PLACEMENT. DRY
E02 E03 FUNCTIONING OR A THE [Link]
CAUSE OF THE AGAIN THE
PRESENCE OF WATER OR ON BUTTON
DUST IN THE SHUTDOWN FILTER
COMBUSTIBLE OEN LE
FIXED DEPOSIT
THE INCREASE OF THE
TEMPERATURE OF THE
PIECE HAS
LET IT COOL
INTERRUPTED THE
STOVE. PRESS THE
E07 FUNCTIONING OF THE
POWER BUTTON
STOVE OF ( THE SYSTEM
OFF
SURVEILLANCE OF THE
TEMPERATURE HAS
FUNCTIONED
THE STOVE HAS LEFT REMOVE THE
E09 FILTER OF FUNCTIONING BECAUSE OBSTACLES OF THE
THE AIR FLOW AIR OUTLET
HOT, THE HOT FROM THE
OEL FAN VENTIDOR OF
FAN FILTER FILTER OF
THEY ARE BLOCKED U FAN AND
OBSTRUCTED BY SOMETHING 8 CLEAN IT. PRESS
THE SYSTEM OF AGAIN THE
PREVENTION OF ON BUTTON/
OVERHEATING SHUTDOWN. IF THE
IT HAS WORKED DISPARATE SYSTEMS
 SEVERAL TIMES
INTERRUPT THE
USE AND
to put oneself in

CONTACT WITH HIM

TECHNICAL SERVICE

THE HEATER STOPPED VETILAR IT

THE OPERATION ROOM AND
AUTOMATICALLY PRESS AGAIN THE
ON BUTTON/
E13
( THE SYSTEM OF OFF
Combustion
INCOMPLETE HAS VENTILATE ONE OR TWO
FUNCIONADO9 TIMES PER HOUR

REMOVE THE
REMOVE THE OBSTACLES
THE STOVE HAS BEEN
OBCTACULOS AROUND THE
STOP
AROUND THE COMMANDS OF
AUTOMATICALLY TO
COMMANDS OF VISUALIZATION.
CAUSE OF PRESSURE
VISUALIZATIONBACK RECONNECT
CONSTANT OR OF A
A CONECTAPULSAR THE PULSAR
KEY LOCK
AGAIN THE BUTTON AGAIN THE
EXTINGUISHED
ON/OFF POWER BUTTON
/OFF

TO NOTE THE
MESSAGES
OPERATION
VISUALIZED AND
DEFECTIVE IT IS
F00 F30 DISCONNECT THE
NEW REQUIREMENTS
[Link] ON
PARTS AND CONTROL
CONTACT WITH HIM
TECHNICAL SERVICE

TENKI SFH-3001 SFH-4600

Codes of
Instructions Recommendations
errors
E0 The ON button has been pressed for more than 5 Check the panel
seconds which has none
tight the
 buttons. Return
to turn on
The ignition is not occurring, the flames are not stable. Check the tank.
The ignition security system has fixed and removable
E1
activated). Presence of water in the device ( The system that does not have
de seguridad de combustion sa ha activado ) powder or water
The flames are not stable and the flames rise. revise the pond
too high. (The security system of fixed and removable
E2
combustion has been activated ( Presence of water or that does not have
dirt on the device powder or water
Check that not.
A tremor or a strong impact has shaken the
have paraffin
E4 device. (The automatic extinguishing system has
spill and
activated)
turn it back on
Wait for the
the device cools down.
Check that not
Heating inside the device. (The system
E7 they are obstructed
the overheating prevention has been activated
entries and exits
of air and return
to turn on
Wait for the
the device cools down.
Check that it is not
The hot air outlet is blocked causing
d2 are obstructed the
in reheating
inputs and outputs
of air and return
to light up

TOYOTOMI

CODE MEANING
E-O TEMPERATURE IN THE STOVE TOO HIGH
THERE IS NO ENERGY YOU CAN RETURN TO
F-O
TURN ON THE STOVE
E-1 BROKEN THERMOSTAT OR
DISCONNECTED. GET IN TOUCH WITH HIM
TECHNICAL SERVICE
Ignition thermistor with failure. Put it on.
F-1
IN CONTACT WITH TECHNICAL SERVICE
THE PRIMARY FLAME ROD IS
E-2
NOT WORKING WELL AND/OR IS DIRTY
YOU HAVE ACCIDENTALLY ACTIVATED THE
SAFETY SWITCH. YOU MUST
E-5 RESET THIS DEVICE AS DESCRIBED.
PRESS THE "OFF" KEY AND TURN IT BACK ON
YOUR STOVE
 THE BURNER FLAME HAS BEEN PUT OUT FOR
THE OPERATION. CHECK IF THE AIR FILTER IS
E-6
COVERED IN DUST. IF SO, CLEAN THE FILTER OF
AIR
E-7 AMBIENT TEMPERATURE ABOVE 32 DEGREES
E-8 MOTOR FAILURE IN THE VENTILATOR
DIRTY AIR FILTER OR FUEL PUMP
E-9
DIRTY
THE STOVE HAS BEEN IN CONTINUOUS OPERATION
FOR A PERIOD OF 50 HOURS AND IT HAS TURNED OFF
50 Hr
BY ITSELF AUTOMATICALLY. RETURN
TURN ON THE STOVE
NO FUEL. RETURN TO REFUEL.
--:--
REMOVABLE FUEL TANK
--:-- THE INDICATOR
VERY LITTLE VENTILATION. VENTILATE BETTER
FROM 'WIND'
FORM
FLASHING

ZIBRO

CODE INFORMATION SOLUTION

TEMPERATURE WITHIN LET IT COOL THE
E0 THE STOVE TOO MUCH COOKANDRETURN
HIGH TURN IT ON LATER
NETWORK TENSION TURN ON THE STOVES
FO
Interrupted AGAIN
Consult a
E1 FAULTY THERMOSTAT
Technical Service
CONSULT A
E2 PROBLEM OF INNITION
TECHNICAL SERVICE
RESISTANCE OF CONSULT THE
F1
DAMAGED BURNER TECHNICAL SERVICE
TURN ON THE STOVE
E5 ANTI-ROLLOVER INSURANCE
AGAIN
CONSULT THE SERCIO
E6 BAD COMBUSTION
TECHNICIAN
IF IT WERE NECESSARY
AMBIENT TEMPERATURE
E7 LIGHTING THE STOVE
ABOVE 32 DEGREES
AGAIN
CONSULT A
E8 Broken fan
TECHNICAL SERVICE
AIR FILTER IS DIRTY CLEAN THE FILTER
E9 THE FUEL PUMP CONSULT ONE
IT IS DIRTY TECHNICAL SERVICE
 THE STOVE HAS BEEN
LIT 49 HOURS WITHOUT
Turn on the stove
49 Hr INTERUPTION AND HAS
AGAIN
OFF
AUTOMATICALLY

KERONA CSH 12000 CSH 14000

ERRORS MEANING
THE STOVE CALL HAS BEEN TURNED OFF
DURING THE OPERATION. CHECK IF THE FILTER
EO3
IT IS COVERED WITH DUST. IF SO, CLEAN IT.
FILTRO DE AIRE
EO4 VERY LITTLE VENTILATION. VENTILATE
TEMPERATURE IN THE STOVE TOO HIGH
E05
HIGH
THE STOVE IS TILTED OR
EO6
received a blow
FUEL FUEL SHORTAGE REFILL
FAILURE IN THE FAN MOTOR.
E08
CONTACT TECHNICAL SERVICE
THE PRIMARY FLAME ROD IS
EO9
NOT WORKING WELL AND IT IS DIRTY
IGNITION THERMISTOR WITH
E10 PROBLEM. CONTACT HIM/HER
TECHNICAL SERVICE
E14 AMBIENT TEMPERATURE ABOVE 28 DEGREES
BROKEN THERMOSTAT OR
E16 DISCONNECTED - PLEASE CONTACT
THE TECHNICAL SERVICE
SYMBOL OF E
THE TANK HAS BEEN REMOVED FROM THE
STOVE
THE STOVE HAS BEEN IN OPERATION
CONTINUES FOR A PERIOD OF 3 HOURS AND IS
END IT HAS TURNED OFFAUTOMATICALLY. PLEASE RETURN.
TURN ON THE STOVE