User Manual

[Link]
 Summary
1- User account on the MaxiECU site ......................................................... 4
2- Software Installation ................................................................................................ 4
3- Connection Configuration .................................................................................... 5
Configure the Bluetooth connection..............................................................................................5
Set up the Wifi connection .......................................................................................................6
4- Application method .................................................................................................... 6
5- License Update ............................................................................................. 7
6- Use of the software.................................................................................................. 7
Connection to the vehicle's computer .........................................................................................8
Disconnection from the vehicle's computer......................................................................................9
Automatic vehicle analysis ...............................................................................................9
Fault Codes (DTC) ....................................................................................................................9
Real-time parameters ...........................................................................................................9
Test actuators .........................................................................................................................10
Adaptations ..............................................................................................................................10
Graph
Error logging .......................................................................................................12
Font color...................................................................................................................13
Home screen icons..................................................................................................................14
Icons settings section.........................................................................................................14
Icons section Help .......................... 14
Other icons – After selecting the vehicle brand ..........................................................15
Other icons – After connecting with the calculator..............................................................15
Other icons – After selecting the icon Default codes ..................................................15
Other icons - After selecting the Real-time Settings icon ................................16
Other icons – After selecting the Graph icon...............................................................16

[Link] 2
Basic information
The use of the software does not require any specialized training. However, it is
It is recommended to read the instruction manual before first use.
The use of the software constitutes acceptance of the terms of the license.
Familiarize yourself with the license terms before installation.
The license is secured by a key, integrated into the interface. This means that you can
use the software on multiple devices.

Hardware requirements
Windows - Newer system on Windows XP
512 MB RAM
1 GB of free space on the hard drive
Free USB port
Internet Connection

Usage precautions
Do not disassemble the product.
In case of malfunction, the product must only be repaired by a technician.
qualified maintenance.
Do not use the device near flammable substances.
Keep out of reach of children.
Protect from moisture.
Do not connect to 24V trucks.
The product must be discarded at an appropriate collection point. Do not throw it away with the regular trash.
housewives. For more information, contact your dealer or the local authority.
waste elimination.

For any technical questions, you can contact us via our contact form.
directly on our site: [Link], or by email: infos@[Link]

MaxiECU France
By ALP Diagnostic
59 Roland Carraz Avenue
21300 Chenôve

[Link] 3
 1- User account on the MaxiECU site
Creating an account is necessary to use the software.

After finalizing your purchase, you will receive a link to download the software at the address.
email provided at the time of purchase.

Click on the link and follow the instructions that appear.

Attention: The link sent is valid for 14 days. If you are unable to activate the account via
the link, go to the [Link] use the 'Account Activation' button.

After creating the user account, use the functions below:

Your data
Password change

Forms for technical service / support and

history of application forms
Overview of license data, generation of a
license .pdf, access to purchase an extension of
license
Downloading the current software and other files,
for example MaxiTools Program

Log in via the [Link]– MY ACCOUNT button

Attention: as a connection, enter the serial number of the interface.

The serial number of the interface is a unique number (a combination of digits and letters).

2- Software Installation
Attention: during installation, the interface must not be connected to the computer.
Log in to your user account. The software is available for download.
in the Downloads tab.
Follow the messages that appear.
During installation, provide the serial number of the interface and the password of
account login.

[Link] 4
For more details, we provide you with a tutorial to help you with
the installation of the software:[Link]/[Link]

3- Connection configuration
After installing the software, you need to pair the interface with Windows. In the
MaxiECU interfaces of 4thgeneration, you can choose a Bluetooth or Wifi connection.
The process is unique for the selected connection, that is to say if you change the
Bluetooth connection to Wifi or vice versa, you need to follow the connection procedure.
appropriate.

Configure the Bluetooth connection

Connect the interface to the vehicle's OBDII port. The indicator light on the interface should be
vert.
Enter the Bluetooth module of Windows:
In the Windows taskbar (next to the date and clock), click on the icon
"Bluetooth" OR use the keyboard shortcut: "I+WIN" then select: -> "Devices"
Bluetooth and other devices.
If the Bluetooth module is not active, turn it on.
Click on "Add Bluetooth or other device" -> "Bluetooth" and wait for the
system detects the interface.
In the list of detected devices, select the interface (the name will include the number of
series of your interface), then click the "Connect" button.
- Launch the MaxiECU software. Go to 'Settings' (gear icon), then in
Connection settings (two arrows icon).
Select the 'Bluetooth' connection option and then click on 'Search'. The software
will automatically pair with the interface (the serial number of your interface
will appear in the 'Interface ID' bar.

Confirm with the 'OK' button. After that, you can start the diagnosis of
vehicle.
If the system requires a password, enter: 1234

[Link] 5
Configure the Wifi connection
Connect the interface to the vehicle's OBDII port. The interface LED should be
vert.
Enter the Wifi module of Windows:
In the Windows toolbar (next to the date and clock), click on the 'Wifi' icon.
In the list of available Wifi networks, select the network that contains the number of
series of your interface in its name.
Check the box 'Connect automatically', then click on 'Connect'.
- Launch the MaxiECU software. Go to 'Settings' (gear icon), then in
Connection settings (two arrows icon).
Select the 'Local Network' login option.

Confirm with the 'OK' button. After that, you can start the diagnosis of the
vehicle.

4- Mode of application
If you want to set the application mode, click on: settings, then Settings of
the application

Select the mode for the tablet or for the computer.

Click on
In the application settings, you can also clear all settings.
current.

[Link] 6
 5- License update
Attention: Updating the license is necessary if the account details have changed.
For example, you have a new interface, changed your email address, or purchased a
additional license (new brand).

1- If you downloaded the software installation file before October 2020, uninstall it.
First, the MaxiECU software and download the new installation file from the account
of the user.
Users who have the installation file with a release date after October 2020,
can move to step 2.
2- Make sure you are connected to the Internet.
3- Run the software, click on:
« Aide » (icône de point d’interrogation) -> « Licence » (icône de clé)

Enter the user account password and confirm with OK.

If you have changed your interface, make sure you have correctly entered the serial number of
your NEW interface, as username.

6- Use of the software

Once the registration and configuration are completed correctly, you can move on to
vehicle diagnostics.

Don't forget to keep the right order:

1. Connect the interface 2. Launch the program 3. Connect the interface to the vehicle

[Link] 7
Connection to the vehicle's computer
Choose the brand that interests you.
In the panel with filters, select the vehicle model, then the year of production.
as well as the system.

Choose the calculator (ECU) you want to connect to.

Click on

If it is not possible to connect to the vehicle's computer:

Check if the communication port has been selected in the MaxiECU program - See
our [Link]/[Link]
If the error occurs only on certain computers, update the software - See section
5 " License Update "
If the update does not resolve the issue, please contact us and find our
contact details on page 3.

If the brand icons in the main window are displayed in gray, it means that the
marque en question n’a pas été achetée. Afin de déverrouiller l’accès, vous devez acheter une
license for additional vehicle brands. We invite you to consult our
[Link] contact us by email:infos@[Link]

At initial activation, the columns have a certain width, they are sometimes too
narrow, which prevents you from seeing the values in the table. You can modify the
width by enlarging the column, using your mouse.
To move down, use the bar located on the right side of the table.

[Link] 8
Disconnection from the vehicle's computer
Before disconnecting the computer, finish measuring the parameters, otherwise the possibility
the communication will not be activated.

Click on

Automatic vehicle analysis

After selecting the model and production year of the car, the magnifying glass icon is
highlighting.
This option allows you to quickly and easily analyze all the displayed systems.
in the list.
If the engine is selected, a window appears asking you "Clear faults"
registered?
When you click on the confirmation, the program checks for the occurrence of errors and
removes them, then checks the occurrence of errors again, which can be verified in the
final report.

Fault Codes (DTC)

Once connected to the vehicle's computer, switch to the Fault Codes (DTC) tab.

Click on

Refresh (F3) - Update the view with a list of defects

Flaw removal - Removes defects and simultaneously checks if all

defects have been removed

Calculator information (Ctrl+1) – Return to calculator information

Real-time settings
Once connected to the vehicle's computer, switch to real-time parameters.

Click on Select at least one parameter from the list and use it.

Additional function icons are displayed in the Active Settings tab.

[Link] 9
If you want to increase the display of the shown value of the parameter, move the cursor
on this value, right-click on it, then click using the button
left click on "Zoom".
You can open multiple enlarged windows simultaneously with the values of
parameters.

Test actuators
Once connected to the vehicle's calculator, switch to the 'Test actuators' button.

Click on

Then, select the item you want to test.

Click on

Adaptations
This option allows you to perform advanced functions in the calculator.

Attention: This option is used only at your own risk.

The option is recommended only for advanced users. A mistake
Using the option may cause permanent damage to the calculator.

Graph
Additional function icons are displayed in the Graph tab.

[Link] 10
Click on

Choose the parameters that interest you (Maximum 4 per chart).

If possible, choose parameters from the same set or group, this will allow you
to obtain more accurate measurements.
The program allows for the presentation of three distinct graphs.

Click on

Click on the circle symbol in the icon will turn red.

The report is an option that allows you to generate a readable document containing
information, among other things, on the calculator, the recorded faults, and the parameters.

If you wish to receive reports, enable the generated reports option.

automatically, click on: Settings, then on Reports.

Choose the type of report:

[Link] 11
Select the location where reports will be automatically saved afterwards.
each diagnosis completed.

To make your data visible in the report, complete the user data. If
If you want to complete your profile, click on: Settings, then user data.

Error recording
Si, lors de l’utilisation du logiciel, il se produit un manque de communication notoire avec les
car computer, or another problem that you cannot solve, contact
us via the reporting form available on the user account.

If the issue concerns the functionality of the software, attach the file with the log of
operations (as described in the description below) as an attachment to
report form.

Activate the log by clicking on the icon

When activated, the word LOG in the icon will turn yellow.
A window also appears to indicate the default location where the file will be
recorded.

Connect to the vehicle calculator.

Perform actions that cause the problem.

Once the connection is established, the file will be saved to the selected location.

Compress the file. To do this, select the MaxiECU files, click on them with the
Right-click the mouse, hover over the Send to option, then select Compressed Folder
(zipped).

Fill out the form and if the issue concerns the functionality of the software, please
attach the compressed LOG file.

[Link] 12
Font color
To change the font color, click on the Black / White icon.

There are 2 parameters:

Black font color (Day mode) White font color (Night mode)

[Link] 13
Home screen icons

Exit (Alt + F4) End of work

Settings (Ctrl + Alt + S) Enter setup mode

Help (F1) Information about the software

Return (Alt + F) Return to the previous page

Black / White Change the color of the font

Icons settings section

Language selection

User data. Ability to enter data visible on the

rapports (nom, adresse, informations supplémentaires)
Application settings. Option to choose the working mode
on the tablet or the computer

Connection settings

Reports. Option to indicate the format of the reports and the location where they
will be recorded

Help section icons

About (Shift + F1) Software data, including the software version, the
compilation date, creation date, database

License (Shift + F2) Register the product

Questions (Shift + F3) Library

[Link] 14
Other icons – After selecting the vehicle brand

Trace file (Ctrl + L) Recording of the ongoing process

Automatic analysis of
Analysis of all the systems displayed in the list
vehicle (Ctrl + F)

Connection (Ctrl + O) Connection to the vehicle's computer

Other icons – After logging in with the calculator

Refresh (F5) Refresh the view

Error codes (Ctrl + 2) See section Fault codes p.9

Real-time settings
See section Settings p.9
(Ctrl + 3)

Test actuators (Ctrl + F5) See actuator test section p.10

Adaptations (Ctrl + 7) See section Adaptations p.10

The icon appears after entering Test, Inspections

Choose (Shift + Enter) or Adaptations. Confirmation and opening of the
inspection window.

Graph (Ctrl + 8) See graph section p.10

The icon appears after entering Test, Codes

Information about the
flaws or adaptations. Return to the whole
calculator (Ctrl + 1)
of the selected calculator settings.

Disconnect (Ctrl + F4) Disconnection with the computer

Other icons – After selecting the icon Default codes

Refresh (F3) Refresh the view with a list of defects

Remove the defects and check simultaneously if

Erasure of defects (Del)
all defects have been removed

[Link] 15
Other icons – After selecting the Settings icon in real time
real

Control of all the Automatic selection of the control of all the

systems (Ctrl + A) systems
Uncheck the control of Disabling automatic selection of
all systems (Ctrl + U) control of all systems
Reading parameters (Ctrl
Start of reading selected parameters
+ Alt + R

Other icons – After selecting the Graph icon

Show the panel data (Ctrl + )

Data display
Alt + D

Show the panel graphs (Ctrl +

Displaying charts
Alt + G

Graphic impression (Ctrl + Alt + R) Start drawing the graph

Full zoom in (Ctrl + +) Full zoom out (Ctrl + -)

Zoom in (+) Zoom out (-)

Zoom Y (Ctrl + Y)

[Link] 16