Introduction to G-Code

Programming
Computer Integrated Manufacturing
Unit 2: CNC Machining
In this lesson:
Review Coordinate Geometry Basics
Identify common Terminology

Examine G and M - Code language
Provide opportunities for Review and
Practice
Rectangular Coordinate System
X-axis
Y-axis
Origin
.125 inch spacing
A (X,Y) (1,.875)
(1.000,1.000
)
(-1.125,.625)
(-.375,-.500)
(.750,-1.000)
Ordered Pairs
A
B
C
D
3D Coordinate System (X,Y,Z)
X-axis
Z-
axis
Y-axis
Basic Machine Axes: 3 axis
Milling Machines: 3 axis
X axis (table left and
right)
Y axis (table in and out)
Z axis (usually the
spindle axis)
Additional Axes
A axis (angular axis about X - axis)
B axis (angular axis about Y axis)
C axis (angular axis about Z axis)

U axis (secondary axis parallel to X)
V axis (secondary axis parallel to Y)
W axis (secondary axis parallel to Z)
Milling Machines: 4 axis
Terminology
NC Numerical Control
CNC Computer Numerical Control
DNC Direct Numerical Control
APT Automatic Programmed Tool
CAD Computer Aided Design
CAM Computer Aided Manufacturing
CIM Computer Integrated Manufacturing
Download Code Sheet
Click here to open Code Sheet
G - Code Programming
G Code Programming
Originally called the Word Address
programming format.

Processed one line at a time sequentially.
Common Format of a Block
Sequence
#
Preparatory
Function
Dimension
Words
Feed
Rate
Spindle
Function
Tool
Function
Misc.
Function
N50 G90 G01 X1.40Y2.25 F10 S1500 T01 M03
Individual Words
Word Address 1
N Sequence or line number
A tag that identifies the beginning of a block of
code. It is used by operators to locate specific
lines of a program when entering data or verifying
the program operation.

G Preparatory function
G words specify the mode in which the milling
machine is to move along its programmed axes.
Reserved Code Words Worksheet
N Sequence or line number
G Preparatory function

Dimension Words:
X
Y
Z
Word Address 2
Dimension Words
X Distance or position in X direction
Y Distance or position in Y direction
Z Distance or position in Z direction

M Miscellaneous functions
M words specify CNC machine functions not
related to dimensions or axial movements.
F Feed rate (inches per minute or millimeters per
minute)
Rate at which cutting tool moves along an axis.

S Spindle speed (rpm revolutions per minute)
Controls spindle rotation speed.

T Tool number
Specifies tool to be selected.
Word Address 3
I Circular cutting reference for x axis

J Circular cutting reference for y axis

K Circular cutting reference for z axis
Word Address 4
G Word
G words or codes tell the machine to
perform certain functions. Most G
words are modal which means they
remain in effect until replaced by
another modal G code.
Common G Codes
G00 Rapid positioning mode
Tool is moved along the shortest route to
programmed X,Y,Z position. Usually NOT
used for cutting.
G01 Linear Interpolation mode
Tool is moved along a straight-line path at
programmed rate of speed.

G02 Circular motion clockwise (cw)
G03 Circular motion counter clockwise
(ccw)
Common G Codes, con.,
G17 XY plane
G18 XZ plane
G19 YZ plane
G20 Inch Mode
G21 Metric Mode
G28 Return to axis machine Zero
(Home)
G Codes: G90, G91
G90 Absolute Coordinate Reference
References the next position from an absolute
zero point which is set once for the entire
program.

G91 Incremental Coordinate Reference
References the next position from the previous
position.
G Codes: Canned Cycles
G80 Cancel canned cycle
G81 Drilling cycle
G83 Peck drilling cycle
G84 Tapping cycle
G85 Boring cycle
G86 Boring cycle

NOTE: A canned cycle stays in effect until
cancelled by a G80.
Canned Cycles: G81
G81 Drilling Cycle
Feed to depth, rapid return

Example of program code:
N35 G81 X.500Y.500Z-1.000 R.100 F1.50
N36 X1.000Y1.500
N37 X1.500Y2.000
N38 G80
Canned Cycles: G83, G84
G83 Peck Drilling Cycle
Feed to an intermediate depth, rapid out, rapid
back to just above previous depth, feed to next
depth, rapid out, repeat until reaching full depth.

G84 Tapping Cycle
This cycle creates internal threads in an existing
hole.
NOTE: One cannot over-ride the feed rate.

Canned Cycles: G85, G86
G85 - Boring Cycle
Feed to depth, feed back out.

G86 Boring Cycle
Feed to depth, rapid out.
G Codes: Cutter Compensation
G40 Cancel cutter diameter
compensation.

G41 Cutter compensation left.

G42 Cutter compensation right.

M Word
M words tell the machine to perform
certain machine related functions,
such as: turn spindle on/off, coolant
on/off, or stop/end program.

Professional Development ID Code: 6006
Common M words
M00 Programmed pause
Automatically stops machine until operator pushes a button
to resume program.

M01 Optional stop
A stop acted upon by the machine when operator has
signaled this command by pushing a button.

M02 End of program
Stops program when all lines of code are completed. Must
be last command in program.
M03 Turn spindle on
In clockwise direction

M04 Turn spindle on
In counter clockwise direction

M05 Stop spindle
Usually used prior to tool change or at end of program.

M06 Tool change
Stops program and calls for a tool change, either
automatically or manually.
Common M words
M08 Turns Accessory 1 on.
M09 Turns Accessory 1 off.

M10 Turns Accessory 2 on.
M11 Turns Accessory 2 off.

M30 End of program
Similar to M02 but M30 will also rewind the program.
Must be last statement in program. If used, DO NOT
use M02.
Common M words
Zero Points
Part Zero
Used for absolute programming mode.
Usually a position on the part that all absolute
coordinates are referenced to.
Changes with different parts and programs.

Machine Zero or Machine Home Position
Fixed for each machine from the manufacturer.
Not changeable.
Cutter Path Generation
Cutter path is generated by moving the
tool from point to point. The points are
previously defined from the part
drawing dimensions.

Each line of code will show the
destination point of where the tool will
go to.
Interpolation
Method of determining intermediate
points along a cutting path.

Two methods:
Linear interpolation cut a path along a
specified angle at a specified feed rate.
Circular interpolation cut a path along an arc
or circle at a specified feed rate.
Axis movements: Caution!
Multiple axis movements are possible.

Best Practice is NOT to make a 3-axis
movement using one line of code.

Move to position using two axes, X,Y;
then move the Z with an additional
line of code.
Example 1: NC Block
Top View NC Block
.125 GRID
SPACES
Origin
(0,0)
Download Worksheet
Click here to open Practice Exercises
Worksheet Problem 1
.125 GRID
SPACES
Origin
(0,0)
E( , )
B( , )
C( , )
D( , )
A( , )
F( , )
G( , )
H( , )
I( , ) J( , )
K( , )
L( , )
Pause Lesson
Example 1: Program NC
N01 G90 G80 T00
N02 G00 X0 Y3.000 Z1.000
N03 M03 S1000

Example 1: Program NC
N01 G90 G80 T00
N02 G00 X0 Y3.000 Z1.000

N03 M03 S1000

N04 X.375 Y.250 Z1.000

N05 Z.100

N06 G01 Z-.100 F5.00

N07 Y1.750
Example 1: Program contd
N08 X1.250 Y.250
N09 Y1.750
N10 G00 Z.100
N11 X2.625 Y.500
N12 GO1 Z-.100
N13 X2.375 Y2.50
N14 X2.000
Example 1: Program contd
N15 X1.750 Y.500

N16 Y1.500

N17 X2.000 Y1.750

N18 X2.375

N19 X2.625 Y1.500

Example 1, con.,
N20 G00 Z1.000

N21 X0 Y3.000

N22 M05

N23 M30
Example 2: PLTW Block
Worksheet Problem 2
Origin
.250 GRID
SPACE
Example 2: Top View
Origin
A( ,
)
E( ,
)
D( ,
)
C( ,
)
B( ,
)
I( , )
H( ,
)
G( , )
F( ,
)
.250 Grid Space
L( ,
)
K( ,
)
J( , )
P( ,
)
O( ,
)
N( ,
)
M( ,
)
Q( ,
)
Pause Lesson
Example 2: PLTW
N01 G90 G80 T01
N02 G00 X0 Y0 Z1.000
N03 M03 S1000
N04 X.750 Y.500 Z1.000
N05 Z.100
N06 G01 Z-.250 F5.00
N07 Y2.500

Example 2: PLTW contd
N08 X1.250
N09 G02 X1.250 Y1.500 I1.250 J2.000
N10 G01 X.750
N11 G00 Z.100
N12 X2.250 Y2.500
N13 G01 Z-.250
N14 Y.500
Example 2: Program contd
N15 X3.250
N16 G00 Z.100
N17 X4.000
N18 G01 Z-.250
N19 Y2.500
N20 X3.500
N21 X4.500
Example 2: PLTW contd
N22 G00 Z.100
N23 X5.000 Y2.500
N24 G01 Z-.250
N25 X5.500 Y.500
N26 X5.750 Y1.500
N27 X6.000 Y.500
N28 X6.500 Y2.500
Example 2: PLTW contd
N29 G00 Z1.000
N30 X0 Y0
N31 M05
N32 M30

Curriculum Alignment:
Unit 2: CNC Machining
Section 2.3 CNC Machining
PowerPoint Introduction to CNC
PowerPoint CNC Programming
References:
Oberg, E. & Jones F. D. & Horton, H. L. & Ryffell,
H. H. (2000). Machinerys Handbook, 26
th

ed., New York, NY: Industrial Press Inc.

Valentino, J.V. & Goldenberg, J. (2003).
Introduction to Computer Numerical Control
(CNC), 3
rd
ed., Upper Saddle River, NJ:
Prentice Hall
Credits:
Writer: Bob Arrendondo
Content Editor: Donna E. Scribner
Narration: Donna E. Scribner
PLTW Editor: Ed Hughes
Production: CJ Amarosa
Video Production: CJ Amarosa
Audio: CJ Amarosa
Project Manager: Donna E. Scribner