Bandreject transfer function
Allpass transfer function
Amplitude equalizer
Pole-zero pairing
• Decomposition of the numerator and the
denominator into products of constant terms,
and the first-order and the second-order
functions
• Constructing the first-order and the second-
order rational functions by pairing the numerator
and denominator terms
• Frequently used: pairing the poles with higher
Q-factors with zeros that are as close as
possible to the poles
Pole-zero pairing criteria
• Maximal dynamic range: a ratio of
(a) the maximum magnitude response
computed over the whole frequency range
to (b) the minimum magnitude response in
the passband
• Maximal signal-to-noise ratio
• Minimal sensitivity
Transfer function
Discrete-time LTI systems
What is transfer function?
• We consider a relaxed, single-input,
single-output, discrete-time LTI system
described by means of a linear constant-
coefficients difference equation
• We assume a causal excitation – input
• Transfer function, H(z), is the ratio of the
output z transform, Y(z), and the input
z transform, X(z)
Y ( z)
H ( z)
X ( z)
H(z) is a rational function in z
• Transfer function is a ratio of two
polynomials in the complex variable z
• For z = ejw, H(z) is the frequency
response of the LTI system
• Many properties of LTI systems can be
closely associated with the characteristics
of the transfer function in the z-plane
Poles and zeros
• Roots of the transfer function denominator
A(z) are called the poles
• We compute the poles from the equation
A(z) = denominator(H(z)) = 0
• Roots of the transfer function numerator
B(z) are called the zeros
• We obtain the zeros from the equation
B(z) = numerator(H(z)) = 0
Pole-zero representation
zeros
poles
Polynomials A(z) and B(z) have real coefficients, so zeros and
poles must be real or occur in complex conjugate pairs
First-order sections & biquads
the first-order
transfer function
the second-order
transfer function
Systems described by the first- A system characterized by the second-
order transfer function we call order transfer function we call a
first-order sections biquadratic section or biquad
Any transfer function can be expressed as
a product of first-order and second-order transfer functions, so
any LTI system can be resolved into first-order sections and biquads
H(z) can be expressed in terms of z-1
This presentation is preferred
in the DSP community
A quotient of two polynomials is called a rational function
and the highest power in the polynomials is called the
order of the rational function
freqz
B = [0.0093 -0.0123 0.0232 -0.0172 0.0233 -0.0124 0.0094]
A = [1 -4.312 8.5888 -9.8704 6.8602 -2.7272 0.4865]
freqz(B,A)
zplane
B = [0.0093 -0.0123 0.0232 -0.0172 0.0233 -0.0124 0.0094]
A = [1 -4.312 8.5888 -9.8704 6.8602 -2.7272 0.4865]
zplane(B,A)
legend('zeros','poles')
tf2zpk
B = [0.0093 -0.0123 0.0232 -0.0172 0.0233 -0.0124 0.0094]
A = [1 -4.312 8.5888 -9.8704 6.8602 -2.7272 0.4865]
[z,p,k] = tf2zpk(B,A)
tf2sos
B = [0.0093 -0.0123 0.0232 -0.0172 0.0233 -0.0124 0.0094]
A = [1 -4.312 8.5888 -9.8704 6.8602 -2.7272 0.4865]
sos = tf2sos(B,A)
Quality factor (Q-factor)
complex-
conjugate pairs
Lowpass transfer function
Highpass transfer function
Bandpass transfer function
Bandreject transfer function
Allpass transfer function
Pole-zero pairing
• Decomposition of the numerator and the
denominator into products of constant terms, the
first-order and the second-order polynomials
• Constructing the first-order and the second-
order rational functions by pairing the numerator
and denominator terms
• Frequently used: pairing the poles with higher a
with zeros that are as close as possible to those
poles
