OSI Network Layer

Network Fundamentals – Chapter 5

Sandra Coleman, CCNA, CCAI

Version 4.0 © 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 1
Objectives
 Identify the role of the Network Layer, as it describes
communication from one end device to another end device.
 Examine the most common Network Layer protocol, Internet
Protocol (IP), and its features for providing connectionless and
best-effort service.
 Understand the principles used to guide the division or grouping
of devices into networks.
 Understand the hierarchical addressing of devices and how this
allows communication between networks.
 Understand the fundamentals of routes, next hop addresses and
packet forwarding to a destination network.

© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 2

 Network Layer Protocols and Internet Protocol (IP)

Provides services
to exchange data
over the network
between end
devices.

4 Processes:
Addressing
Encapsulation
Routing
Decapsulation

© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 3

Network Layer protocols
 Internet Protocol version 4 (IPv4) –most widely used
 Internet Protocol version 6 (IPv6) – future use…soon!
 Novell Internetwork Packet Exchange (IPX)
 AppleTalk
 Connectionless Network Service (CLNS/DECNet)

© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 4

 Network Layer Protocols and Internet Protocol (IP)

 Designed with
low overhead
 Provides only
functions
necessary to
deliver packets
over the
network
 basic
characteristics

© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 5

Network Layer Protocols and Internet Protocol (IP)
 Connectionless systems (IP, UDP)
 Receiving host is NOT contacted before the message is
sent

© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 6

 Network Layer Protocols and Internet Protocol (IP)
 Unreliable? Simply means that IP does not have the
capability to manage & recover from missing or corrupt
packets.

Depends on
TCP to
manage the
reliability
factor. It just
gets data
from point A
to point B
© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 7
 Network Layer Protocols and Internet Protocol (IP)
 Media doesn’t matter. IP only is concerned with the
maximum size of PDU that each type can transport.

MTU – Maximum
Transmission Unit

© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 8

Network Layer Protocols and Internet Protocol (IP)
 Source/Destination IP addresses get added at the
network layer (layer 3).

© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 9

Network Layer Protocols and Internet Protocol (IP)
 IP packet looks like this. Now let’s break down the 6
key fields.

© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 10

 6 key fields of IP header
 IP source address – 32 bit ip address of the source host
 IP destination address - 32 bit ip address of the destination host –
used to forward the packet by the router!
 Time-to-live (TTL) – 8-bit binary that tells the ‘remaining life’ of the
packet. Countdown mechanism at each hop. When is reaches zero
(0), packet is dropped to prevent routing loops.
 Type-of-service (ToS) – 8-bit binary used to determine the priority of
each packet. Different types of packets get processed at higher
priorities.
 Protocol – indicates the data payload type carried in the packet.
01=ICMP, 06=TCP, 17=UDP, etc.
 Fragment Offset – used in case a packet has to be split because of
changing media type to re-construct the packet at the destination.

© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 11

Grouping Devices into Networks
 Divide networks by:
Geographic location
Purpose
Ownership

© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 12

Grouping networks
 Purpose
Users may share similar software or have similar bandwidth
needs

 Ownership
Assists in controlling access to devices and data
Assists in administration of the network
Helps with security issues

 Geographic location
Improves management and operation
Just the fact of wiring up an entire LAN in a single building
makes this a logical place to start

© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 13

 Why separate hosts in a network?
 Common issues with large networks: performance
degradation, security issues, and address management
(identifying hosts).
Discuss
Broadcast
domains..
Be able to
identify
how many
there are!

© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 14

Why separate hosts?
 Security…not allowing students to access research
records and vice-versa.
 Done with routers and firewalls.

© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 15

Why separate hosts?
 Address management. Identifying host and using
default gateways.

© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 16

Hierarchical Addressing
 Each host is uniquely identified. Has levels that assist in
forwarding packets..much like mailing addresses.

© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 17

Hierarchical Addressing
 Routers use the network portion…switches use the host
portion.

© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 18

Device parameters
 If a host needs to communicate ANYWHERE that isn’t
on the local LAN, you must use an intermediary device
(router).

© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 19

Default Gateway
 Necessary if you are going to communicate with the outside world.
You have to key this in on the host device
 If not configured, can only communicate locally on your LAN
 The host and the default gateway MUST be on the same network.
 Use ipconfig to view ip address, subnet mask, and default
gateway information.
 May also use netstat –r, or route print to view routing details on
your PC (stop and do this now…look at your default gateway.
 For any given host, it is the NEAR-SIDE Router interface.
What is the first router interface a packet would encounter if it
left your PC? The IP address of that interface on the router
becomes your default gate in the PC.

© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 20

Packet Forwarding
 Decisions have to be made at each DEVICE along the
path until the packet reaches its final destination

© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 21

Routing packets

© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 22

 Routers and routing tables
 3 main features: Destination network, next-hop, and
the metric. Discuss the routing table below.

Discuss
routing table
information –
know these !

© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 23

Functions of a router

 Select the ‘Best Path’ for data delivery

 Switch packet out the proper port
 Routers use the Network portion of the IP address to
forward packets.
 They don’t care about the EXACT host, just the EXACT
network.
 If broadcast storms arise, network admins can replace
layer 2 devices (switches) with layer 3 (routers) or
subnet the network into smaller components.

© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 24

Default Route?

 A default route is where the router sends remote data if

it does not have the destination network in the routing
table.
 Network admin must DEFINE the default route.
 If it exists, the packets will be sent there
 If it doesn’t exist, the packets will simply be dropped!

© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 25

Finding the desirable route
 When a packet enters a router, the router looks at the
routing table to decide WHERE to forward the packet.
 Therefore, the precedence of route selection for the
packet going to 10.1.1.55 would be:
 1. 10.1.1.0
 2. 10.1.0.0
 3. 10.0.0.0
 4. 0.0.0.0 (Default route if configured)
 5. Dropped

© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 26

Routers job in packet forwarding
 Done packet by packet and at every router
 Router will either forward it to next-hop router, forward it
to the destination host, or drop the packet.

© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 27

Types of routes

 Static – manually configured by network admin. Can’t

do this for every route. Becomes too burdensome!

© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 28

Types of routes
 Dynamic – learned from other routers (RIP, EIGRP,
OSPF, etc.) Up-to-date routing tables are exchanged.
 Consumes bandwidth

© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 29

Ch. 5 is finished!

Study Guide – due on test day –

Define – pg. 126
concept questions – pg. 127-128
Define – pg. 128

Labs –None!

Online test….NOW! Will count as your TEST grade…

NOT a homework grade

© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 30