Scribd
Upload
234 views1 page

Transport Control Program TP Error

The transport control program tp ended with an error indicating that the transport profile was missing. Checking the transport profile location, TMS configuration, and network connection found no issues. The solution was determining that the password for the SAP service user account had expired, preventing the application from running tp programs through that user.

Uploaded by

asylnr
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
Download as docx, pdf, or txt
234 views1 page

Transport Control Program TP Error

The transport control program tp ended with an error indicating that the transport profile was missing. Checking the transport profile location, TMS configuration, and network connection found no issues. The solution was determining that the password for the SAP service user account had expired, preventing the application from running tp programs through that user.

Uploaded by

asylnr
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1/ 1

Transport Control Program TP Error 0208

Problem : Transport control program tp ended with error code 0208. Error shows that transport profile is missing.

Action Steps : 1. Check whether transport profile which is located in Transport Domain exists or not. The link should be like this : //<domain_host>/sapmnt/trans/bin/TP_DOMAIN_<SID>.PFL . 2. Check the TMS configuration like RFC Destination configuration, transport domain setting. 3. Check network connection between localhost and transport domain host. 4. Try to run tp command from OS level. ex : tp showbuffer <SID> pf=<transport_profile> Apparently, that those check action have nothing wrong. They all are exist and working fine. But still the STMS failed to run any tp programs. Solution: Check the user SAPservice<SID> in the Windows User Management or in the Domain Controller. It might be locked or expired. In my case, I found that this service users password is expired. This makes sense that SAP application cannot call tp program. It use SAPservice<SID> user to run tp program in Operating System.

You might also like