Creo Basic Udf

Pro/ENGINEER
BASIC LIBRARY Catalog

with UDF Library
Parametric Technology Corporation
U00211097
COPYRIGHT
RESERVED.
1997 PARAMETRIC TECHNOLOGY CORPORATION. ALL RIGHTS
This Pro/BASIC LIBRARY Catalog with UDF LIBRARY Users Guide may not be
copied, reproduced, disclosed, transferred, or reduced to any form, including electronic medium
or machine-readable form, or transmitted or publicly performed by any means, electronic or
otherwise, unless Parametric Technology Corporation (PTC) consents in writing in advance.
Use of the software has been provided under a Software License Agreement.
Information described in this manual is furnished for information only, is subject to change
without notice, and should not be construed as a commitment by PTC. PTC assumes no
responsibility or liability for any errors or inaccuracies that may appear in this manual.
The software contains valuable trade secrets and proprietary information and is protected by
United States copyright laws and copyright laws of other countries. Unauthorized use of the
software or its documentation can result in civil damages and criminal prosecution.
Pro/ENGINEER, Pro/CDRS, and Pro/MECHANICA are registered trademarks, and BASIC
LIBRARY, all product names in the PTC product family, and the PTC logo are trademarks of
Parametric Technology Corporation in the United States and other countries. All other
companies and products referenced herein have trademarks or registered trademarks of their
respective holders.
US GOVERNMENT RESTRICTED RIGHTS LEGEND
This Software and Documentation are provided with RESTRICTED RIGHTS. Use, duplication,
or disclosure by the Government is subject to restrictions as set forth in subparagraph (c)(1)(ii)
of the Rights in Technical Data and Computer Software Clause at DFARS 252.227-7013 or
Commercial Computer Software-Restricted Rights at 48 CFR 52.227-19, as applicable.
Parametric Technology Corporation, 128 Technology Drive, Waltham, MA 02154.
1997 Parametric Technology Corporation. Unpublishedall rights reserved under the

copyright laws of the United States.
Date
10/06/94
Document
U00210494
07/14/95
U00210795
01/20/97
U00210197
Order Number U0021

Printed in U.S.A.
Printing History
Release
New For Release 14.0 Pro/BASIC LIBRARY Catalog with
UDF LIBRARY Users Guide
Release 15.0 Pro/BASIC LIBRARY Catalog with UDF
LIBRARY Users Guide
Release 18.0 Pro/BASIC LIBRARY Catalog with UDF
LIBRARY Users Guide
Contents
About This Guide
Purpose ....................................................................................................................... ii
Audience...................................................................................................................... ii
Contents ...................................................................................................................... ii
Prerequisites............................................................................................................... iv
Documentation............................................................................................................ iv
Conventions ......................................................................................................... v
Section 1: Features Library

Chapter 1: Geometric Features
1-1
Protrusions...............................................................................................................
Prompts .............................................................................................................
Section Types ...................................................................................................
Cuts .........................................................................................................................
Prompts .............................................................................................................
Section Types ...................................................................................................
Chapter 2: Design Features
1-2
1-2
1-3
1-7
1-7
1-8
2-1
Standard Design Features....................................................................................... 2-2

Prompts ............................................................................................................. 2-2
Hole Types and Family Tables.......................................................................... 2-3
Threaded Holes .......................................................................................... 2-3
Countersunk Head Screw Holes................................................................. 2-6
Hexagon Head Screws ............................................................................... 2-8
Socket Head Screws ................................................................................ 2-10
Metric Design Features.......................................................................................... 2-12
Contents - i
Prompts ...........................................................................................................
Hole Types and Family Tables........................................................................
Threaded Holes ........................................................................................
Metric Countersunk Head Screws ............................................................
Metric Hexagon Head Screws ..................................................................
Socket Head Screws ................................................................................
Grooves for Metric Retaining Rings ..........................................................
2-13
2-13
2-14
2-19
2-22
2-24
2-29
Chapter 3: Tube Forming Features
3-1
Placement................................................................................................................ 3-2
Shapes..................................................................................................................... 3-3
Chapter 4: Molding Features
4-1
Runners ...................................................................................................................
Prompts .............................................................................................................
Shapes ..............................................................................................................
Gates .......................................................................................................................
Prompts .............................................................................................................
Shapes ..............................................................................................................
Chapter 5: Sheet Metal Design Features
4-2
4-2
4-2
4-7
4-7
4-7
5-1
Louvers ....................................................................................................................
Louver Placement .............................................................................................
Shapes ..............................................................................................................
Offsets .....................................................................................................................
Offset Placement...............................................................................................
Shapes ..............................................................................................................
Beads.......................................................................................................................
Bead Placement ................................................................................................
Shapes ..............................................................................................................
5-2
5-2
5-2
5-4
5-4
5-5
5-8
5-8
5-9
Section 2: ANSI Inch Series Parts Library

Chapter 6: ANSI Inch Pins
6-1
Cotter Pin.................................................................................................................
Generic part name: PINA ..................................................................................
Clevis Pin.................................................................................................................
Generic part name: PINB ..................................................................................
Chapter 7: ANSI Inch Keys
7-1
Square Parallel Key .................................................................................................

Generic Name: KAA ..........................................................................................
Rectangular Parallel Key .........................................................................................
Generic Name: KBB ..........................................................................................
Contents - ii
6-2
6-2
6-3
6-3
7-2
7-2
7-3
7-3
BASIC LIBRARY Catalog with UDF Library
Square Plain Tapered Key.......................................................................................

Generic Name: KCC .........................................................................................
Rectangular Plain Tapered Key...............................................................................
Generic Name: KDD .........................................................................................
Square Gib-Head Taper Key ...................................................................................
Generic Name: KEE ..........................................................................................
Rectangular Gib-Head Taper Key ...........................................................................
Generic Name: KFF ..........................................................................................
Chapter 8: ANSI Inch Large Rivets
7-4
7-4
7-5
7-6
7-7
7-7
7-8
7-8
8-1
Button Head Rivet....................................................................................................

Generic part name: RAA ...................................................................................
High Button Head (Acorn) Rivet ..............................................................................
Generic part name: RBB ...................................................................................
Cone Head Rivet .....................................................................................................
Generic part name: RCC...................................................................................
Pan Head Rivet........................................................................................................
Generic part name: RDD...................................................................................
Flat Countersunk Head Rivet...................................................................................
Generic part name: REE ...................................................................................
Oval Countersunk Head Rivet .................................................................................
Generic part name: RFF ...................................................................................
Chapter 9: ANSI Inch Lock Washers
8-2
8-2
8-3
8-3
8-4
8-4
8-5
8-5
8-6
8-6
8-7
8-7
9-1
Regular Helical Spring Lock Washer .......................................................................

Generic part name: WHS ..................................................................................
Extra Duty Helical Spring Lock Washer...................................................................
Generic part name: WED ..................................................................................
Hi-Collar Helical Spring Lock Washer......................................................................
Generic part name: WHC ..................................................................................
Chapter 10: ANSI Inch Machine Screws and Nuts
9-2
9-2
9-3
9-3
9-5
9-5
10-1
Slotted 100 Degree Flat Countersunk Head..........................................................

Generic part name: MSAA ..............................................................................
Slotted Flat Countersunk Head..............................................................................
Generic part name: MSBB ..............................................................................
Slotted Undercut Flat Countersunk Head ..............................................................
Generic part name: MSDD ..............................................................................
Plain Hex Washer Head ........................................................................................
Generic part name: MSEE ..............................................................................
Slotted Truss Head ................................................................................................
Generic part name: MSFF...............................................................................
10-2
10-2
10-3
10-3
10-4
10-4
10-5
10-5
10-6
10-7
Contents - iii
Plain Regular Hex Head ........................................................................................ 10-8

Generic part name: MSGG.............................................................................. 10-8
Slotted Pan Head................................................................................................... 10-9
Generic part name: MSHH .............................................................................. 10-9
Slotted Fillister Head............................................................................................ 10-11
Generic part name: MSII ............................................................................... 10-11
Slotted Drilled Fillister Head ................................................................................ 10-12
Generic part name: MSJJ.............................................................................. 10-12
Slotted Oval Countersunk Head .......................................................................... 10-14
Generic part name: MSKK ............................................................................ 10-14
Slotted Binding Head ........................................................................................... 10-15
Generic part name: MSLL ............................................................................. 10-15
Slotted Undercut Oval Countersunk Head........................................................... 10-17
Generic part name: MSMM ........................................................................... 10-17
Type I Cross Recessed 100 Degree Countersunk .............................................. 10-18
Generic part name: MSAX ............................................................................ 10-18
Type I Cross Recessed Flat Countersunk Head ................................................. 10-19
Generic part name: MSBX ............................................................................ 10-19
Type I Cross Recessed Undercut Flat Countersunk ........................................... 10-21
Generic part name: MSDX ............................................................................ 10-21
Type I Cross Recessed Truss Head.................................................................... 10-22
Generic part name: MSFX............................................................................. 10-22
Type I Cross Recessed Pan Head ...................................................................... 10-23
Generic part name: MSHX ............................................................................ 10-23
Type I Cross Recessed Fillister Head ................................................................. 10-25
Generic part name: MSIX.............................................................................. 10-25
Type I Cross Recessed Oval Countersunk.......................................................... 10-26
Generic part name: MSKX ............................................................................ 10-26
Type I Cross Recessed Binding Head................................................................. 10-28
Generic part name: MSLX............................................................................. 10-28
Type I Cross Recessed Undercut Oval Countersunk .......................................... 10-29
Generic part name: MSMX............................................................................ 10-29
Hex Machine Screw Nut ...................................................................................... 10-30
Generic part name: HMSN ........................................................................... 10-31
Square Machine Screw Nut ................................................................................. 10-31
Generic part name: SQMSN ......................................................................... 10-32
Chapter 11: ANSI Inch Plain Washers
11-1
Plain Washer (Preferred Sizes) ............................................................................. 11-2

Generic part name: WA................................................................................... 11-2
Type B Plain Washer ............................................................................................. 11-4
Contents - iv
Generic part name: WB................................................................................... 11-4
Chapter 12: ANSI Inch Round Head Bolts
12-1
Countersunk and Slotted Countersunk Bolts......................................................... 12-2

Generic Part Name: ACSB.............................................................................. 12-2
114 Degree Countersunk Square Neck Bolts........................................................ 12-4
Generic Part Name: ACSN ............................................................................. 12-4
Round Head Fin Neck Bolts .................................................................................. 12-5
Generic Part Name: AFNB .............................................................................. 12-5
Round Head Square Neck Bolts............................................................................ 12-6
Generic Part Name: ALSN .............................................................................. 12-6
Round Head Bolts.................................................................................................. 12-8
Generic Part Name: ARHB ............................................................................. 12-8
Step Bolts .............................................................................................................. 12-9
Generic Part Name: ARSB.............................................................................. 12-9
Round Head Ribbed Neck Bolts .......................................................................... 12-10
Generic Part Name: ARSN ........................................................................... 12-10
Round Head Short Square Neck Bolts ................................................................ 12-12
Generic Part Name: ASSN............................................................................ 12-12
T-Head Bolts........................................................................................................ 12-13
Generic Part Name: ATHB ............................................................................ 12-13
Chapter 13: ANSI Inch Slotted Head Cap, Square Head Set, and Slotted
Headless Set Screws
13-1
Slotted Flat Countersunk Head Cap Screw ........................................................... 13-2
Generic part name: CSAA............................................................................... 13-2
Slotted Round Head Cap Screw............................................................................ 13-3
Generic part name: CSBB............................................................................... 13-4
Slotted Fillister Head Cap Screw ........................................................................... 13-5
Generic part name: CSCC .............................................................................. 13-5
Slotted Headless Set Screw, Flat Point ................................................................. 13-6
Generic part name: SSAA ............................................................................... 13-6
Slotted Headless Set Screw, Dog Point ................................................................ 13-7
Generic part name: SSBB ............................................................................... 13-8
Slotted Headless Set Screw, Half Dog Point ......................................................... 13-9
Generic part name: SSCC .............................................................................. 13-9
Slotted Headless Set Screw, Cone Point ............................................................ 13-10
Generic part name: SSDD ............................................................................ 13-10
Slotted Headless Set Screw, Oval Point.............................................................. 13-12
Generic part name: SSEE ............................................................................. 13-12
Slotted Headless Set Screw, Cup Point .............................................................. 13-13
Generic part name: SSFF ............................................................................. 13-13
Contents - v
Square Head Set Screw (Flat Head Type), Flat Point .........................................
Generic part name: SSGG ............................................................................
Square Head Set Screw (Flat Head Type), Dog Point ........................................
Generic part name: SSHH.............................................................................
Square Head Set Screw (Flat Head Type), Half Dog Point .................................
Generic part name: SSII................................................................................
Square Head Set Screw (Flat Head Type), Cone Point ......................................
Generic part name: SSJJ ..............................................................................
Square Head Set Screw (Flat Head Type), Oval Point........................................
Generic part name: SSKK .............................................................................
Square Head Set Screw (Flat Head Type), Cup Point ........................................
Generic part name: SSLL..............................................................................
Square Head Set Screw (Cone Head Type), Flat Point ......................................
Generic part name: SSSS .............................................................................
Square Head Set Screw (Cone Head Type), Dog Point......................................
Generic part name: SSTT .............................................................................
Square Head Set Screw (Cone Head Type), Half Dog Point ..............................
Generic part name: SSUU.............................................................................
Square Head Set Screw (Cone Head Type), Cone Point....................................
Generic part name: SSVV .............................................................................
Square Head Set Screw (Cone Head Type), Oval Point .....................................
Generic part name: SSWW ...........................................................................
Square Head Set Screw (Cone Head Type), Cup Point......................................
Generic part name: SSXX .............................................................................
Chapter 14: ANSI Inch Small Solid Rivets
13-15
13-15
13-16
13-16
13-18
13-18
13-19
13-19
13-21
13-21
13-22
13-22
13-24
13-24
13-25
13-25
13-27
13-27
13-28
13-28
13-30
13-30
13-31
13-31
14-1
Flat Head Rivet ...................................................................................................... 14-2

Generic part name: RGG ................................................................................ 14-2
Flat Countersunk Head Rivet................................................................................. 14-3
Generic part name: RHH................................................................................. 14-4
Button Head Rivet.................................................................................................. 14-5
Generic part name: RII .................................................................................... 14-5
Pan Head Rivet...................................................................................................... 14-7
Generic part name: RJJ .................................................................................. 14-7
Truss Head Rivet ................................................................................................... 14-9
Generic part name: RKK ................................................................................. 14-9
Tinners Rivet........................................................................................................ 14-11
Generic part name: RLL ................................................................................ 14-11
Coopers Rivet ...................................................................................................... 14-13
Generic part name: RMM .............................................................................. 14-13
Belt Rivet ............................................................................................................. 14-14
Contents - vi
Generic part name: RNN............................................................................... 14-14

60 Flat Countersunk Head Rivet ........................................................................ 14-15
Generic part name: ROO .............................................................................. 14-16
Chapter 15: ANSI Inch Socket Cap, Shoulder and Set Screws
15-1
Hex Socket Head Cap Screw ................................................................................ 15-2

Generic part name: CSDD .............................................................................. 15-2
Hex Socket Flat Countersunk Head Cap Screw.................................................... 15-7
Generic part name: CSEE............................................................................... 15-7
Hex Socket Button Head Cap Screw................................................................... 15-10
Generic part name: CSFF ............................................................................. 15-10
Hex Socket Set Screw, Flat Point........................................................................ 15-12
Generic part name: SSYA ............................................................................. 15-12
Hex Socket Set Screw, Oval Point ...................................................................... 15-14
Generic part name: SSYB ............................................................................. 15-14
Hex Socket Set Screw, Half Dog Point................................................................ 15-16
Generic part name: SSYC............................................................................. 15-16
Hex Socket Set Screw, Conic Point..................................................................... 15-18
Generic part name: SSYD............................................................................. 15-18
Hex Socket Set Screw, Cup Point ....................................................................... 15-20
Generic part name: SSYE ............................................................................. 15-20
Hex Socket Head Shoulder Screws..................................................................... 15-22
Generic part name: CSSD ............................................................................ 15-22
Chapter 16: ANSI Inch Square and Hex Bolts and Screws
16-1
Heavy Hex Structural Bolt...................................................................................... 16-1

Generic part name: SHB ................................................................................. 16-1
Square Bolt ............................................................................................................ 16-3
Generic part name: SQB ................................................................................. 16-3
Hex Bolt ................................................................................................................. 16-4
Generic part name: RHB ................................................................................. 16-5
Heavy Hex Bolt ...................................................................................................... 16-7
Generic part name: HHB ................................................................................. 16-7
Hex Cap Screw (Finished Hex Bolt) ...................................................................... 16-9
Generic part name: HCS ................................................................................. 16-9
Heavy Hex Screw ................................................................................................ 16-11
Generic part name: HHS ............................................................................... 16-11
Chapter 17: ANSI Inch Square and Hex Nuts
17-1
Hex Nut.................................................................................................................. 17-2

Generic Part Name: RHN................................................................................ 17-2
Hex Jam Nut .......................................................................................................... 17-3
Contents - vii
Generic part name: HJN................................................................................. 17-4

Heavy Hex Nut....................................................................................................... 17-5
Generic Name: HHN ....................................................................................... 17-5
Heavy Hex Jam Nut............................................................................................... 17-8
Generic Name: HHJN...................................................................................... 17-8
Hex Flat Nut......................................................................................................... 17-10
Generic part name: HFN ............................................................................... 17-11
Hex Flat Jam Nut ................................................................................................. 17-11
Generic part name: HFJN ............................................................................ 17-11
Heavy Hex Flat Nut.............................................................................................. 17-12
Generic part name: HHFN............................................................................ 17-12
Heavy Hex Flat Jam Nut...................................................................................... 17-13
Generic part name: HHFJN........................................................................... 17-13
Hex Thick Nut ...................................................................................................... 17-14
Generic part name: HTN .............................................................................. 17-15
Hex Slotted Nut.................................................................................................... 17-16
Generic part name: HSN .............................................................................. 17-16
Heavy Hex Slotted Nut ........................................................................................ 17-18
Generic part name: HHSN ........................................................................... 17-18
Hex Thick Slotted Nut .......................................................................................... 17-20
Generic part name: HSTN............................................................................. 17-20
Square Nut........................................................................................................... 17-22
Generic part name: SQN.............................................................................. 17-22
Heavy Square Nut ............................................................................................... 17-24
Generic part name: HSQN ........................................................................... 17-24
Chapter 18: ANSI Inch T-Bolts and T-Nuts

Standard T-Bolts....................................................................................................
Generic Part Name: ASTB ..............................................................................
Standard T-Nuts ....................................................................................................
Generic Part Name: ASTN ..............................................................................
Chapter 19: ANSI Inch Tapping Screws
18-2
18-2
18-3
18-4
19-1
Type B Slotted Pan Head Tapping Screw .............................................................

Generic part name: TSAA ...............................................................................
Type AB Slotted Pan Head Tapping Screw...........................................................
Generic part name: TSBB ...............................................................................
Type B Slotted Flat Countersunk Head Tapping Screw ........................................
Generic part name: TSCC...............................................................................
Type AB Slotted Flat Countersunk Head Tapping Screw......................................
Generic part name: TSDD...............................................................................
Type B Slotted Oval Countersunk Head Tapping Screw.......................................
Contents - viii
18-1
19-2
19-2
19-3
19-3
19-4
19-4
19-5
19-6
19-7
Generic part name: TSEE ............................................................................... 19-7

Type AB Slotted Oval Countersunk Head Tapping Screw .................................... 19-8
Generic part name: TSFF ............................................................................... 19-8
Type B Slotted Fillister Head Tapping Screw ........................................................ 19-9
Generic part name: TSGG .............................................................................. 19-9
Type AB Slotted Fillister Head Tapping Screw.................................................... 19-10
Generic part name: TSHH............................................................................. 19-10
Type B Plain Hex Washer Head Tapping Screw ................................................. 19-11
Generic part name: TSII ................................................................................ 19-12
Type AB Plain Hex Washer Head Tapping Screw............................................... 19-12
Generic part name: TSJJ .............................................................................. 19-13
Type B, Type I Cross Recessed Pan Head Tapping Screw ................................ 19-14
Generic part name: TSKK ............................................................................. 19-14
Type AB, Type I Cross Recessed Pan Head Tapping Screw.............................. 19-15
Generic part name: TSLL .............................................................................. 19-15
Type B, Type I Cross Recessed Flat Countersunk Head .................................... 19-16
Generic part name: TSMM ............................................................................ 19-16
Type AB, Type I Cross Recessed Flat Countersunk Head.................................. 19-17
Generic part name: TSNN............................................................................. 19-18
Type B, Type I Cross Recessed Oval Countersunk Head................................... 19-19
Generic part name: TSOO ............................................................................ 19-19
Type AB, Type I Cross Recessed Oval Countersunk Head ................................ 19-20
Generic part name: TSPP ............................................................................. 19-20
Type B, Type I Cross Recessed Fillister Head .................................................... 19-21
Generic part name: TSQQ ............................................................................ 19-21
Type AB, Type I Cross Recessed Fillister Head.................................................. 19-22
Generic part name: TSRR............................................................................. 19-22
Chapter 20: ANSI Inch Woodruff Keys
20-1
Full Radius Type, Small Series..............................................................................

Generic part name: KWA ................................................................................
Flat Bottom Type, Small Series .............................................................................
Generic Name: KWB .......................................................................................
Full Radius Type, Large Series .............................................................................
Generic Name: KWC.......................................................................................
Flat Bottom Type, Large Series .............................................................................
Generic Name: KWD.......................................................................................
20-2
20-2
20-4
20-4
20-6
20-6
20-7
20-7
Section 3: ANSI Metric Series Part Library

Chapter 21: ANSI Metric Aerospace Fasteners
21-1
Spline Wrenched Bolts .......................................................................................... 21-1

Contents - ix
Generic Part Name: MASB .............................................................................

Hexagon Head Bolts..............................................................................................
Generic Part Name: MAHB .............................................................................
Spline Drive Nuts ...................................................................................................
Generic Part Name: MASN .............................................................................
Plain Hexagon Nuts ...............................................................................................
Generic Part Name: MAHN .............................................................................
Castellated Nuts ....................................................................................................
Generic Part Name: MACN .............................................................................
Chapter 22: ANSI Metric Hex Nuts
21-1
21-2
21-2
21-4
21-4
21-5
21-5
21-6
21-6
22-1
Hex Nuts, Style 1 ...................................................................................................

Generic Part Name: MHN1 .............................................................................
Hex Nuts, Style 2 ...................................................................................................
Generic Part Name: MHN2 .............................................................................
Slotted Hex Nuts....................................................................................................
Generic Part Name: MSHN .............................................................................
Hex Flange Nuts ....................................................................................................
Generic Part Name: MHFN .............................................................................
Hex Jam Nuts ........................................................................................................
Generic Part Name: MHJN..............................................................................
Heavy Hex Nuts.....................................................................................................
Generic Part Name: MHHN.............................................................................
Chapter 23: ANSI Metric Hex Cap Screws
22-2
22-2
22-3
22-3
22-4
22-4
22-5
22-5
22-6
22-6
22-7
22-8
23-1
Hex Cap Screws .................................................................................................... 23-2

Generic Part Name: MHCS ............................................................................. 23-2
Formed Hex Screws .............................................................................................. 23-4
Generic Part Name: MFHS ............................................................................. 23-4
Heavy Hex Screws ................................................................................................ 23-6
Generic Part Name: MHHS ............................................................................. 23-6
Hex Flange Screws................................................................................................ 23-7
Generic Part Name: MHFS ............................................................................. 23-7
Hex Bolts ............................................................................................................... 23-9
Generic Part Name: MHB................................................................................ 23-9
Heavy Hex Bolts .................................................................................................. 23-11
Generic Part Name: MHHB ........................................................................... 23-11
Heavy Hex Structural Bolts.................................................................................. 23-12
Generic Part Name: MHSB ........................................................................... 23-13
Hex Lag Screws................................................................................................... 23-14
Generic Part Name: MHLS............................................................................ 23-14
Heavy Hex Flange Screws .................................................................................. 23-15
Contents - x
Generic Part Name: MHHF ........................................................................... 23-15
Chapter 24: ANSI Metric Machine Screws
24-1
Slotted Flat Countersunk Head.............................................................................. 24-2

Generic Part Name: MSMS............................................................................. 24-2
Type 1 Cross Recessed Flat Countersunk Head .................................................. 24-3
Generic Part Name: MCMS ............................................................................ 24-3
Slotted Oval Countersunk Head ............................................................................ 24-4
Generic Part Name: MOMS ............................................................................ 24-5
Type 1 Cross Recessed Oval Countersunk Head ................................................. 24-6
Generic Part Name: MRMS ............................................................................ 24-6
Slotted Pan Head................................................................................................... 24-7
Generic Part Name: MPMS............................................................................. 24-7
Type 1 Cross Recessed Pan Head ....................................................................... 24-9
Generic Part Name: MTMS ............................................................................. 24-9
Hex Head............................................................................................................. 24-11
Generic Part Name: MHMS .......................................................................... 24-11
Hex Flange Head................................................................................................. 24-12
Generic Part Name: MFMS ........................................................................... 24-12
Chapter 25: ANSI Metric Retaining Rings
25-1
Basic External, Series 3AM1 ................................................................................. 25-2

Generic Part Name: MBER ............................................................................. 25-2
Basic Internal, Series 3BM1 .................................................................................. 25-5
Generic Part Name: MBIR .............................................................................. 25-5
E - Ring External, Series 3CM1............................................................................. 25-8
Generic Part Name: MEER ............................................................................. 25-9
Heavy Duty External, Series 3DM1 ..................................................................... 25-10
Generic Part Name: MHER ........................................................................... 25-10
Reinforced E - Ring External, Series 3EM1......................................................... 25-11
Generic Part Name: MRER ........................................................................... 25-11
C - Ring External, Series 3FM1 ........................................................................... 25-12
Generic Part Name: MCER ........................................................................... 25-12
Chapter 26: ANSI Metric Rivets
26-1
Small Solid Flat Head Rivets .................................................................................

Generic Part Name: MFHR .............................................................................
Small Solid Round Head Rivets.............................................................................
Generic Part Name: MRHR.............................................................................
Small Solid Flat Countersunk Head Rivets............................................................
Generic Part Name: MFCR .............................................................................
General Purpose Semi-Tubular Rivets ..................................................................
26-2
26-2
26-4
26-4
26-5
26-5
26-7
Contents - xi
Generic Part Name: MSTR ............................................................................. 26-7
Chapter 27: ANSI Metric Round Head Bolts

Square Neck Bolts .................................................................................................
Generic Part Name: MLSN..............................................................................
Short Square Neck Bolts .......................................................................................
Generic Part Name: MSSN .............................................................................
Chapter 28: ANSI Metric Socket Head Screws
27-1
27-2
27-2
27-4
27-4
28-1
Socket Head Cap Screws...................................................................................... 28-2

Generic Part Name: MSCS ............................................................................. 28-2
Hexagon Socket Head Shoulder Screws............................................................... 28-4
Generic Part Name: MSSS ............................................................................. 28-4
Hexagon Socket Button Head Cap Screws ........................................................... 28-6
Generic Part Name: MSBS ............................................................................. 28-6
Hexagon Socket Flat Countersunk Head Cap Screws .......................................... 28-7
Generic Part Name: MSFS.............................................................................. 28-7
Socket Set Screws, Flat Point ............................................................................... 28-8
Generic Part Name: MOSF ............................................................................. 28-9
Socket Set Screws, Oval Point ............................................................................ 28-10
Generic Part Name: MOSO........................................................................... 28-10
Socket Set Screws, Cone Point........................................................................... 28-11
Generic Part Name: MOSC........................................................................... 28-11
Socket Set Screws, Half Dog Point ..................................................................... 28-13
Generic Part Name: MOSD........................................................................... 28-13
Socket Set Screws, Cup Point............................................................................. 28-14
Generic Part Name: MOSP ........................................................................... 28-14
Chapter 29: ANSI Metric T-Bolts and T-Nuts

Metric T-Bolts.........................................................................................................
Generic Part Name: MTB ................................................................................
Metric T-Nuts .........................................................................................................
Generic Part Name: MTN................................................................................
Chapter 30: ANSI Metric Tapping Screws

Slotted Flat Countersunk Head..............................................................................
Generic Part Name: MSTS..............................................................................
Type 1 Cross Recessed Flat Countersunk Head ..................................................
Generic Part Name: MCTS .............................................................................
Slotted Oval Countersunk Head ............................................................................
Generic Part Name: MOTS .............................................................................
Type 1 Cross Recessed Oval Countersunk Head .................................................
Generic Part Name: MRTS .............................................................................
Contents - xii
29-1
29-2
29-2
29-4
29-4
30-1
30-2
30-2
30-3
30-4
30-5
30-5
30-7
30-7
Slotted Pan Head................................................................................................... 30-8

Generic Part Name: MPTS ............................................................................. 30-9
Type 1 Cross Recessed Pan Head ..................................................................... 30-10
Generic Part Name: MTTS............................................................................ 30-10
Hex Head............................................................................................................. 30-11
Generic Part Name: MHTS ........................................................................... 30-12
Hex Flange Head................................................................................................. 30-13
Generic Part Name: MFTS............................................................................ 30-13
Chapter 31: ANSI Metric Washers
31-1
Metric Plain Washers............................................................................................. 31-2

Generic Part Name: MPW............................................................................... 31-2
Section 4: ISO Fasteners and Standard Parts

Chapter 32: ISO External Drive Hex Bolts and Screws
32-1
Hex Head Bolts, Grades A & B.............................................................................. 32-2

Generic Part Name: IHBA ............................................................................... 32-2
Hex Head Bolts, Reduced Shank .......................................................................... 32-3
Generic Part Name: IHBR ............................................................................... 32-3
Hex Head Bolts, Grade C ...................................................................................... 32-5
Generic Part Name: IHBC ............................................................................... 32-5
Hex Head Screws, Grades A & B .......................................................................... 32-6
Generic Part Name: IHSA ............................................................................... 32-6
Hex Head Screws, Grade C .................................................................................. 32-8
Generic Part Name: IHSC ............................................................................... 32-8
Hex Flange Bolts, Small Series ........................................................................... 32-10
Generic Part Name: IHFBS ........................................................................... 32-10
Hex High-Strength Bolts, Regular Thread Length ............................................... 32-11
Generic Part Name: IHBHL ........................................................................... 32-11
Hex High-Strength Bolts, Short Thread Length ................................................... 32-12
Generic Part Name: IHBHS .......................................................................... 32-12
Hex Head Screws, Metric Fine Pitch Thread, Grades A & B............................... 32-13
Generic Part Name: IHSF ............................................................................. 32-13
Hex Head Bolts, Metric Fine Pitch Thread, Grades A & B................................... 32-15
Generic Part Name: IHBF ............................................................................. 32-15
Chapter 33: ISO Square Neck Bolts
33-1
Cup Head Square Neck Bolts, Grade C, Large Head ...........................................

Generic Part Name: ISNBL .............................................................................
Cup Head Square Neck Bolts, Grade B, Small Head............................................
Generic Part Name: ISNBS.............................................................................
33-2
33-2
33-3
33-3
Contents - xiii
Chapter 34: ISO Hex Socket Head Screws

Hex Socket Head Cap Screws, Grade A ...............................................................
Generic Part Name: ISHCS.............................................................................
Hex Socket Head Shoulder Screws.......................................................................
Generic Part Name: ISHSS.............................................................................
Hex Socket Button Head Screws (Metric Series) ..................................................
Generic Part Name: ISHBS.............................................................................
Chapter 35: ISO Slotted Head Screws
34-2
34-2
34-4
34-5
34-6
34-6
35-1
Slotted Cheese Head Screws, Grade A ................................................................

Generic Part Name: ISLGS .............................................................................
Slotted Pan Head Screws, Grade A ......................................................................
Generic Part Name: ISLPS .............................................................................
Slotted Countersunk Head Screws, Grade A ........................................................
Generic Part Name: ISLCS .............................................................................
Slotted Raised Countersunk Head Screws, Grade A ............................................
Generic Part Name: ISLRS .............................................................................
Chapter 36: ISO Cross Recessed Head Screws

Cross Recessed Pan Head Screws, Grade A .......................................................
Generic Part Name: ICRPS.............................................................................
Cross Recessed Countersunk Flat Head Screws, Property Class 4.8 ..................
Generic Part Name: ICRFC.............................................................................
Cross Recessed Countersunk Flat Head Screws, Property Class 8.8 ..................
Generic Part Name: ICRFS.............................................................................
Cross Recessed Raised Countersunk Head Screws, Grade A .............................
Chapter 37: ISO Set Screws
35-2
35-2
35-3
35-3
35-5
35-5
35-6
35-6
36-1
36-2
36-2
36-4
36-4
36-6
36-6
36-8
37-1
Hex Socket Set Screws With Flat Point.................................................................

Generic Part Name: ISEHF .............................................................................
Hex Socket Set Screws With Cone Point ..............................................................
Generic Part Name: ISEHC.............................................................................
Hex Socket Set Screws With Dog Point ................................................................
Generic Part Name: ISEHD.............................................................................
Hex Socket Set Screws With Cup Point ................................................................
Generic Part Name: ISEHP.............................................................................
Slotted Set Screws With Flat Point ........................................................................
Generic Part Name: ISESF .............................................................................
Slotted Set Screws With Cone Point .....................................................................
Generic Part Name: ISESC.............................................................................
Slotted Set Screws with Long Dog Point ...............................................................
Generic Part Name: ISESD.............................................................................
Contents - xiv
34-1
37-2
37-2
37-3
37-3
37-4
37-5
37-6
37-6
37-7
37-7
37-8
37-8
37-9
37-9
Slotted Set Screws With Cup Point ..................................................................... 37-10

Generic Part Name: ISESP ........................................................................... 37-10
Chapter 38: ISO Tapping Screws
38-1
Hex Head Tapping Screws .................................................................................... 38-2

Generic Part Name: ITHHS............................................................................. 38-2
Slotted Pan Head Tapping Screws........................................................................ 38-3
Generic Part Name: ITSPS ............................................................................. 38-4
Slotted Countersunk Head Tapping Screws.......................................................... 38-5
Generic Part Name: ITSCS ............................................................................. 38-5
Slotted Raised Countersunk Head Tapping Screws.............................................. 38-7
Generic Part Name: ITSRC............................................................................. 38-7
Cross Recessed Pan Head Tapping Screws......................................................... 38-9
Generic Part Name: ITCPS ............................................................................. 38-9
Cross Recessed Countersunk Head Tapping Screws......................................... 38-10
Generic Part Name: ITCCS........................................................................... 38-11
Cross Recessed Raised Countersunk Head Tapping Screws ............................ 38-12
Generic Part Name: ITCRS........................................................................... 38-13
Chapter 39: ISO Hex Nuts
39-1
Hex Nuts, Style 1, Grade A & B............................................................................. 39-2

Generic Part Name: INHS1 ............................................................................. 39-2
Hex Nuts, Style 2, Grade A & B............................................................................. 39-3
Generic Part Name: INHS2 ............................................................................. 39-3
Hex Nuts, Grade C ................................................................................................ 39-4
Generic Part Name: INHGC ............................................................................ 39-4
Hex Thin Nuts (Chamfered), Grade A & B............................................................. 39-5
Generic Part Name: INHTC ............................................................................ 39-5
Hex Thin Nuts (Unchamfered), Grade B................................................................ 39-6
Generic Part Name: INHTU ............................................................................ 39-6
Hex Nuts with Flange, Grade A ............................................................................. 39-7
Generic Part Name: INHFA............................................................................. 39-7
Hex Nuts for Fine Mechanics, Grade F ................................................................. 39-8
Generic Part Name: INHFM ............................................................................ 39-8
Hex Structural Nuts, Large Flats, Grade B ............................................................ 39-9
Generic Part Name: INSLW ............................................................................ 39-9
Hex Structural Nuts, Style 1, Grade A & B .......................................................... 39-10
Generic Part Name: INSS1 ........................................................................... 39-10
Hex Structural Nuts, Large Flats, Style 1, Grade B ............................................. 39-11
Generic Part Name: INSLB ........................................................................... 39-11
Hex Structural Nuts, Style 2, Grade A ................................................................. 39-12
Generic Part Name: INSS2 ........................................................................... 39-12
Contents - xv
Hex Nuts, Style 1, Metric Fine Pitch Thread, Grade A & B..................................
Generic Part Name: INHF .............................................................................
Hex Nuts, Style 2, Metric Fine Pitch Thread, Grade A & B..................................
Generic Part Name: INHF2 ...........................................................................
Hex Thin Nuts, Metric Fine Pitch Thread, Grade A & B.......................................
Generic Part Name: INHTF ...........................................................................
39-13
39-13
39-14
39-14
39-15
39-15
Chapter 40: ISO Prevailing Torque Type Nuts

Prevailing Torque Hex Nuts, Style 1, with Non-Metal Inserts ................................
Generic Part Name: INPS1 .............................................................................
Prevailing Torque Hex Nuts, Style 2, with Non-Metal Inserts ................................
Generic Part Name: INPS2 .............................................................................
Prevailing Torque All-Metal Nuts, Style 2, Property Class 5, 8, 10, 12..................
Generic Part Name: INPM2.............................................................................
Prevailing Torque Hex Nuts with Flange and Non-Metal Inserts ...........................
Generic Part Name: INPFN.............................................................................
Prevailing Torque All-Metal Hex Nuts with Flange ................................................
Generic Part Name: INPFM ............................................................................
Prevailing Torque All-Metal Nuts, Style 1, Property Class 5, 8, 10........................
Prevailing Torque All-Metal Nuts, Style 2, Property Class 9..................................
Chapter 41: ISO Washers
40-1
40-2
40-2
40-3
40-3
40-4
40-4
40-5
40-5
40-6
40-6
40-7
40-7
40-8
40-8
41-1
Plain Washers, Normal Series, Grade A ............................................................... 41-2

Generic Part Name: IWPNA............................................................................ 41-2
Plain Washers, Chamfered, Normal Series, Grade A............................................ 41-3
Generic Part Name: IWCNA............................................................................ 41-3
Plain Washers, Normal Series, Grade C ............................................................... 41-4
Generic Part Name: IWPNC............................................................................ 41-4
Plain Washers, Small Series, Grade A .................................................................. 41-5
Generic Part Name: IWPSA ............................................................................ 41-5
Plain Washers, Large Series, Grade A & C........................................................... 41-6
Generic Part Name: IWPLA ............................................................................ 41-6
Plain Washers, Extra Large Series, Grade C ........................................................ 41-7
Generic Part Name: IWPEC............................................................................ 41-7
Plain Washers, Structural, Hardened .................................................................... 41-8
Generic Part Name: IWPHS............................................................................ 41-8
Plain Washers, Chamfered, Structural, Hardened................................................. 41-9
Generic Part Name: IWCHS............................................................................ 41-9
Plain Washers for Clevis Pins, Grade A .............................................................. 41-10
Generic Part Name: IWCPA.......................................................................... 41-10
Contents - xvi
Chapter 42: ISO Pins
42-1
Split Pins, Metric Series......................................................................................... 42-2

Generic Part Name: IPSMS ............................................................................ 42-2
Parallel Pins, Unhardened ..................................................................................... 42-3
Generic Part Name: IPPUC ............................................................................ 42-3
Taper Pins, Unhardened........................................................................................ 42-5
Generic Part Name: IPTUC............................................................................. 42-5
Clevis Pins without Heads ..................................................................................... 42-6
Generic Part Name: IPCWH ........................................................................... 42-6
Clevis Pins with Heads .......................................................................................... 42-8
Generic Part Name: IPCHH ............................................................................ 42-8
Parallel Pins with Internal Thread, Unhardened .................................................. 42-10
Generic Part Name: IPPUT ........................................................................... 42-10
Parallel Pins, Hardened (Dowel Pins).................................................................. 42-11
Generic Part Name: IPPHD .......................................................................... 42-11
Parallel Pins with Internal Thread, Hardened ...................................................... 42-12
Generic Part Name: IPPHT ........................................................................... 42-12
Taper Pins with Internal Thread, Unhardened..................................................... 42-13
Generic Part Name: IPTUT ........................................................................... 42-13
Taper Pins with External Thread, Unhardened.................................................... 42-14
Generic Part Name: IPTET ........................................................................... 42-14
Grooved Pins, Full-Length Parallel Grooved with Pilot........................................ 42-15
Generic Part Name: IPGPG .......................................................................... 42-15
Grooved Pins, Full-Length Parallel Grooved with Chamfer ................................. 42-16
Generic Part Name: IPGPC .......................................................................... 42-16
Grooved Pins, Half-Length Reverse Taper Grooved........................................... 42-17
Generic Part Name: IPGTH .......................................................................... 42-17
Grooved Pins, Third-Length Centre Grooved ...................................................... 42-20
Generic Part Name: IPGTT ........................................................................... 42-21
Grooved Pins, Half-Length Centre Grooved........................................................ 42-23
Generic Part Name: IPGCG .......................................................................... 42-24
Grooved Pins, Full-Length Taper Grooved.......................................................... 42-26
Generic Part Name: IPGTF ........................................................................... 42-26
Grooved Pins, Half-Length Taper Grooved ......................................................... 42-29
Generic Part Name: IPGHT .......................................................................... 42-29
Grooved Pins with Round Head .......................................................................... 42-32
Generic Part Name: IPGRH .......................................................................... 42-32
Grooved Pins with Countersunk Head................................................................. 42-33
Generic Part Name: IPGCH .......................................................................... 42-33
Spring-Type Straight Pins, Coiled and Heavy Duty ............................................. 42-34
Contents - xvii
Generic Part Name: IPSCH...........................................................................

Spring-Type Straight Pins, Coiled and Standard Duty.........................................
Generic Part Name: IPSCS...........................................................................
Spring-Type Straight Pins, Coiled and Light Duty ...............................................
Generic Part Name: IPSCL ...........................................................................
Spring-Type Straight Pins, Slotted.......................................................................
Generic Part Name: IPSSS ...........................................................................
Contents - xviii
42-34
42-35
42-35
42-36
42-36
42-37
42-38
About This Guide
About This Guide contains information about what is contained in

this user guide and the conventions used.
Topic
Page
Purpose
ii
Audience
ii
Contents
ii
Prerequisites
iv
Documentation
iv
About This Guide - i
Purpose
The BASIC LIBRARY is a collection of commonly used engineering
parts and features ready to use in your assemblies and parts.
Audience
You can use the BASIC LIBRARY features as follows:
The features are already made, completely defined with

appropriate dimensioning schemes and relations, and are
generically sized and located on a reference part. This
means that you can use the feature in your part, sized and
placed to suit your needs.
BASIC LIBRARY features can be modified by you and

stored back in the library where other users can access
them. This allows you to add a family table to the feature if
you have specific sizes of the feature you use repeatedly.
This will save your users the time of modifying the
dimensions of the feature when they retrieve it.
You can also add your own features to the feature library
directory. Pro/LIBRARY then makes all your UDFs
available as library features. Expanding the library
improves efficiency because your users will not have to
spend time re-creating your generic features.
Contents
This document contains illustrations of all the BASIC LIBRARY
parts and features, and all the information necessary to find and
use any part or feature.
At the beginning of this catalog is the Table of Contents that lists,
by name and description, all the BASIC LIBRARY parts and
features. Refer to this when searching for a particular item.
The manual contains the following sections:
ii - About This Guide
SECTION 1Common featuresThis is a collection of

commonly used engineering features (pertaining to
geometry, piping, design, and so on) of generic shapes (such
as hexagonal, oval, and octagonal) and sizes. These are
user-defined features (UDFs) with cross-sections, feature
attributes, and relations built into the feature. The features
are found in the /objlib/featurelib directory and are ready
to use in your parts.
SECTION 2Standard partsThis is a collection of

common fasteners (bolts, nuts, rivets, screws, and so on) of
sizes corresponding to the ANSI inch series. The parts are
easily retrievable using common callouts (such as basic
diameter and rivet size) and are ready to use in your
assemblies. They are found in the /objlib/eng_part_lib
directory.
SECTION 3Metric partsThis is a collection of common

fasteners in metric sizes that conform to ANSI standards.
These parts are also retrievable using common callouts, and
are ready for use in assemblies. They are found in the
/objlib/metriclib directory.
SECTION 4ISO fasteners and partsThis is a

collection of common fasteners and parts that conform to
the ISO standard. These parts are retrievable using
common callouts, and are ready for use in assemblies. They
are found in the /objlib/isofastlib directory.
You can also browse the BASIC LIBRARY using the yellow one-line
help appearing in the Message Window of Pro/ENGINEER. When
your mouse cursor is over a menu item of the library, whether a
directory or part name, the system displays the contents of the
highlighted item.
The different sizes for the parts were created using standard type
family tables. Standard type tables have the advantage that only
the instances being used are stored when you use the File > Save
option, or when you store an assembly or drawing that uses the
instances. The generic part is not usually stored. This saves disk
space, and ensures that, as long as the proper search paths are
maintained, the assembly can be retrieved wherever it is.
The following figure shows the directory hierarchy of the BASIC
LIBRARY.
About This Guide - iii
About This Guide
Figure 0-1: The BASIC LIBRARY Directory Structure

prolib_load_directory
objlib
bin
index.mnu
featurelib
eng_part_lib
- cot_clvs_pin
mklibconfig_unix
- design_udf
mklibconfig_vms.com
- geometry_udf - key
mklibconfig_nt.bat
- piping_udf
metriclib
isofastlib
- aerospace_fast - isohexboltscr
- hex_nuts
- isosqrneckbolt
- large_rivet
- hex_scr_bolt
- isohexscthdscr
- mold_udf
- lock_wash
- mach_scr
- isoslothdscr
- stm_udf
- mach_scrw_nut
- retain_rings
- isocrrecscr
- plain_wash
- rivets
- isosetscr
- rnd_head_bolts
- rnd_head_bolts - isotapscr
- sl_cp_sq_screw
- sock_hd_scr
- isohexnuts
- small_rivet
- t_nut_bolt
- isoprevtrqnuts
- sock_cp_st_scr
- tapping_scr
- isowashers
- sqr_hex_bolt
- washers
- isopins
- sqr_hex_nut
- t_bolt_nut
- tapping_scrw
- woodruff_key
Prerequisites
To use an existing UDF, you need either a Pro/FEATURE or a
Pro/LIBRARY ACCESS license. However, to create your own
UDFs, you need a Pro/FEATURE license.
Documentation
For more information about using the BASIC LIBRARY, see the
Introduction to the Libraries.
Conventions
Convention
Description
UPPERCASE
Pro/ENGINEER-type menu name (for

example, PART).
Boldface
WIndows-type menu name or menu or dialog

box option (for example, View), or utility (for
example, promonitor).
Monospace
(Courier)
Code samples appear in courier font

like this.
SMALLCAPS
Key names appear in smallcaps (for

example, ENTER).
Emphasis
Important information appears in italics like

this.
Choose
Highlight a menu option by placing the

arrow cursor on the option, and pressing the
left mouse button.
Select
A synonym for choose as above, select also

describes the actions of selecting elements
on a model, and checking boxes.
Element
An element describes redefinable

characteristics of a feature in a model.
Mode
An environment in Pro/ENGINEER in
which you can perform a group of closely
related functions (Drawing, for example).
Model
A part, subassembly or top level assembly.
Object
The selected part of the model you view and

manipulate.
Option
An item in a menu or an entry in a

configuration file or a setup file.
Notes:
Important information that should not be overlooked

appears in notes like this.
All references to mouse clicks assume the use of a

right-handed mouse.
About This Guide - v
About This Guide
The following table lists conventions and terms used throughout

this book.
vi - About This Guide
Section 1
Features Library
Section 1 of the BASIC LIBRARY Catalog contains commonly used
engineering features. These features (pertaining to geometry,
design, piping, and so on) are of generic shape (such as hexagonal,
oval, or octagonal) and sizes. These are UDFs with cross-sections,
feature attributes, and relations built into the feature. The features
are ready to use in your part.
1
Geometric Features
The Pro/LIBRARY directory featurelib/geometry_udf contains

protrusions and cuts in standardized sections. Use a datum point
on any surface to place these features in a part.
1-1
Protrusions
Pro/LIBRARY contains protrusions in the subdirectory
protrusion_udf. Protrusions are grouped by standardized
cross-sections. Identify a datum point on the surface of your part as
a location before you add a protrusion. The group name is UGPx,
where x identifies the type of cross-section as follows:
C - Circular
E - Elliptical
H - Hexagonal
OC - Octagonal
OV - Oval
R - Rectangular
S - Slot
Prompts
When you use a protrusion in your part, you must have already
defined a datum point on the surface of the part for the center of the
group, and a reference plane for the direction. The system prompts
you to do the following:
1. Select placement and scaling options for the feature.
2. Enter the dimensions of the feature section. See Section Types
for the information needed. The height value you enter here
will be measured from the FRONT reference plane.
3. Select the center of the protrusion. This is a predefined datum
point.
4. Select the reference plane which defines the direction of the
protrusion. This is a datum plane or planar surface.
5. Indicate the reference direction.
6. If you have entered all valid points, the group will
automatically regenerate in your drawing box.
You can edit the values for the protrusion before you close creation
of the group.
1-2
Section Types
Listed below are examples of each type of cross-section of
protrusions. Included in the drawings are the dimensions which
you will need to enter to specify the protrusion.
Example of Circular Protrusion
Geometric Features
Geometric Features
1-3
Example of Elliptical Protrusion
Example of Hexagonal Protrusion
1-4
Example of Octagonal Protrusion
Geometric Features
Geometric Features
1-5
Example of Oval Protrusion
Example of Rectangular Protrusion
1-6
Example of Slot Protrusion
Geometric Features
Cuts
Pro/LIBRARY contains cuts in the subdirectory cuts_udf. Cuts are
grouped by standardized sections. Identify a datum point on the
surface of your part as a location before you add a cut. The group
name is UGCx, where x identifies the cross-section as follows:
C - Circular
E - Elliptical
H - Hexagonal
OC - Octagonal
OV - Oval
R - Rectangular
S - Slot
Prompts
When you use a cut in your part, you must have already defined a
datum point on the surface of your part for the center of the cut.
The system prompts you to do the following:
1. Select the placement and scaling options for the feature.
Geometric Features
1-7
2. Enter the dimensions of the feature section. See Section Types

for the information needed. The depth value you enter here will
be measured from the FRONT reference plane.
3. Select the display options for invariable dimensions.
4. Select the point for the center of the feature. This is a
predefined datum point.
5. Select the reference plane. This is a datum plane or planar
surface.
6. Select the reference direction for the cut.
You can change the attributes of the cut before you close creation of
the group.
Section Types
Shown below are examples of each shape of cut available in the
UDF library. Included in the drawings are the dimensions which
you will enter to specify the cuts.
Example of Circular Cut
1-8
Example of Elliptical Cut
Geometric Features
Example of Hexagonal Cut
Geometric Features
1-9
Example of Octagonal Cut
Example of Oval Cut
1 - 10
Example of Rectangular Cut
Geometric Features
Example of Slot Cut
Geometric Features
1 - 11
1 - 12
2
Design Features
Pro/LIBRARY group DESIGN contains both standard and metric

design features such as holes, threaded holes and grooves.
Standard features are in the directory design_udf_st, and metric
features are in the directory design_udf_m.
2-1
Standard Design Features

The standard design features are grouped under the structure
USxx. The naming convention is as follows:
xx - Identifies the type of hole or thread. The possible values

are as follows:
TC - Coarse-Thread Threaded Holes
TF - Fine-Thread Threaded Holes
SN - Holes for Countersunk Head Screws
HN - Holes for Hexagon Head Screws
CN - Holes for Socket Head Screws
A p at the end of the part name indicates that the feature is

normal to a plane rather than to the surface of the part.
Prompts
When you use a design feature in your part, you must have already
defined a datum point on the surface of the part for the center of the
feature, and a reference plane for the direction. The system
prompts you to do the following:
2. Enter the dimensions of the feature section. See Hole Types and
Family Tables for the information needed. The height value you
enter here will be measured from the sufrface datum point.
3. Select the center of the feature. This is the predefined datum
point.
feature. This is a datum plane or planar surface.
You can edit the values for the feature before you close creation of
the group.
2-2
Hole Types and Family Tables

Following are examples of each of the standard design features.
Included in the drawings are the dimensions and references you
should supply. Holes for screws have associated family tables,
which are listed in this section.
Threaded Holes
Example of Coarse Threaded Hole - USTC
Design Features
Name
NOM_
THREAD_
DIA
THREAD_
DIA
DRILL_
DIA
MAX_
THREAD_
DIA
CS_DIA
GENERIC
NO.1
0.073
0.06
0.077
0.077
USTC01
NO.2
0.086
0.07
0.090
0.090
USTC02
NO.3
0.099
0.08
0.104
0.104
USTC03
NO.4
0.112
0.09
0.118
0.118
USTC04
NO.5
0.125
0.10
0.131
0.131
USTC05
NO.6
0.138
0.11
0.145
0.145
USTC06
NO.8
0.164
0.14
0.172
0.172
USTC07
NO.10
0.190
0.15
0.200
0.200
USTC08
NO.12
0.216
0.18
0.227
0.227
Design Features
2-3
Name
NOM_
THREAD_
DIA
THREAD_
DIA
DRILL_
DIA
MAX_
THREAD_
DIA
CS_DIA
USTC09
1/4
0.250
0.20
0.262
0.262
USTC10
5/16
0.313
0.26
0.328
0.328
USTC11
3/8
0.375
0.32
0.394
0.394
USTC12
7/16
0.438
0.37
0.459
0.459
USTC13
1/2
0.500
0.43
0.525
0.525
USTC14
9/16
0.563
0.48
0.591
0.591
USTC15
5/8
0.625
0.53
0.656
0.656
USTC16
3/4
0.750
0.65
0.787
0.787
USTC17
7/8
0.875
0.77
0.919
0.919
USTC18
1.000
0.88
1.050
1.050
USTC19
1 1/8
1.125
0.98
1.181
1.181
USTC20
1 1/4
1.250
1.10
1.312
1.312
USTC21
1 3/8
1.375
1.21
1.444
1.444
USTC22
1 1/2
1.500
1.34
1.575
1.575
USTC23
1 3/4
1.750
1.56
1.837
1.837
USTC24
2.000
1.77
2.100
2.100
Example of Fine Threaded Hole - USTF
2-4
NOM_
THREAD_
DIA
THREAD_
DIA
DRILL_
DIA
MAX_
THREAD_
DIA
CS_DIA
GENERIC
NO.0
0.060
0.049
0.063
0.063
USTF01
NO.1
0.073
0.061
0.077
0.077
USTF02
NO.2
0.086
0.075
0.091
0.091
USTF03
NO.3
0.099
0.085
0.104
0.104
USTF04
NO.4
0.112
0.095
0.118
0.118
USTF05
NO.5
0.125
0.106
0.131
0.131
USTF06
NO.6
0.138
0.116
0.145
0.145
USTF07
NO.8
0.164
0.138
0.172
0.172
USTF08
NO.10
0.190
0.161
0.200
0.200
USTF09
NO.12
0.216
0.185
0.227
0.227
USTF10
1/4
0.250
0.217
0.263
0.263
USTF11
5/16
0.313
0.272
0.328
0.328
USTF12
3/8
0.375
0.335
0.394
0.394
USTF13
7/16
0.438
0.390
0.495
0.495
USTF14
1/2
0.500
0.453
0.525
0.525
USTF15
9/16
0.563
0.508
0.591
0.591
USTF16
5/8
0.625
0.571
0.656
0.656
USTF17
3/4
0.750
0.689
0.788
0.788
USTF18
7/8
0.875
0.803
0.919
0.919
USTF19
1.000
0.915
1.050
1.050
USTF20
1 1/8
1.125
1.043
1.181
1.181
USTF21
1 1/4
1.250
1.160
1.313
1.313
USTF22
1 3/8
1.375
1.290
1.444
1.444
USTF23
1 1/2
1.500
1.417
1.575
1.575
Design Features
Design Features
Name
2-5
Countersunk Head Screw Holes

Example of Hole for Countersunk Head Screw - USSN
2-6
Name
NOM_SCREW_DIA
HEAD_HEIGHT
HOLE_DIA
GENERIC
1/4
0.190
0.281
USSN01
1/4
0.190
0.281
USSN02
5/16
0.228
0.344
USSN03
3/8
0.265
0.406
USSN04
7/16
0.265
0.469
USSN05
1/2
0.308
0.531
USSN06
5/8
0.378
0.656
USSN07
3/4
0.442
0.781
USSN08
7/8
0.510
0.906
USSN09
0.576
1.031
USSN10
1 1/8
0.634
1.171
USSN11
1 1/4
0.692
1.312
USSN12
1 3/8
0.758
1.437
USSN13
1 1/2
0.825
1.562
Example of Hole for Countersunk Head Screw Normal to Plane - USSNP
NOM_SCREW_DIA
HEAD_HEIGHT
HOLE_DIA
GENERIC
1/4
0.190
0.281
USSNP01
1/4
0.190
0.281
USSNP02
5/16
0.228
0.344
USSNP03
3/8
0.265
0.406
USSNP04
7/16
0.265
0.469
USSNP05
1/2
0.308
0.531
USSNP06
5/8
0.378
0.656
USSNP07
3/4
0.442
0.781
USSNP08
7/8
0.510
0.906
USSNP09
0.576
1.031
USSNP10
1 1/8
0.634
1.171
USSNP11
1 1/4
0.692
1.312
USSNP12
1 3/8
0.758
1.437
USSNP13
1 1/2
0.825
1.562
Design Features
Design Features
Name
2-7
Hexagon Head Screws

Example of Hole for Hexagon Head Screw- USHN
2-8
Name
NOM_
BOLT_
DIA
HOLE_
DIA
COUNTERBORE_
DIA
COUNTERBORE_
DEPTH
CS_DIA
GENERIC
1/4
0.281
0.832
0.208
0.341
USHN01
1/4
0.281
0.832
0.208
0.341
USHN02
5/16
0.344
0.933
0.255
0.404
USHN03
3/8
0.406
1.113
0.288
0.466
USHN04
7/16
0.469
1.195
0.336
0.529
USHN05
1/2
0.531
1.341
0.384
0.591
USHN06
5/8
0.656
1.568
0.464
0.776
USHN07
3/4
0.781
2.125
0.544
0.901
USHN08
7/8
0.906
2.414
0.624
1.026
USHN09
1.0
1.031
2.484
0.720
1.211
USHN10
1 1/8
1.171
2.688
0.800
1.351
USHN11
1 1/4
1.312
2.875
0.896
1.492
USHN12
1 3/8
1.437
3.062
0.960
1.617
USHN13
1 1/2
1.562
3.250
1.056
1.742
USHN14
1 3/4
1.812
3.625
1.216
2.052
USHN15
2.0
2.062
4.000
1.408
2.302
Example of Hole Normal to Plane for a Hexagon Head Screw - USHNP
Design Features
Name
NOM_
BOLT_
DIA
HOLE_
DIA
COUNTERBORE_
DIA
COUNTERBORE_
DEPTH
CS_DIA
GENERIC
1/4
0.281
0.832
0.208
0.341
USHNP01
1/4
0.281
0.832
0.208
0.341
USHNP02
5/16
0.344
0.933
0.255
0.404
USHNP03
3/8
0.406
1.113
0.288
0.466
USHNP04
7/16
0.469
1.195
0.336
0.529
USHNP05
1/2
0.531
1.341
0.384
0.591
USHNP06
5/8
0.656
1.568
0.464
0.776
USHNP07
3/4
0.781
2.125
0.544
0.901
USHNP08
7/8
0.906
2.414
0.624
1.026
USHNP09
1.0
1.031
2.484
0.720
1.211
USHNP10
1 1/8
1.171
2.688
0.800
1.351
USHNP11
1 1/4
1.312
2.875
0.896
1.492
USHNP12
1 3/8
1.437
3.062
0.960
1.617
USHNP13
1 1/2
1.562
3.250
1.056
1.742
USHNP14
1 3/4
1.812
3.625
1.216
2.052
USHNP15
2.0
2.062
4.000
1.408
2.302
Design Features
2-9
Socket Head Screws

Example of Hole for Socket Head Screw - USCN
Name
NOM_
SCREW_
DIA
HOLE_
DIA
COUNTERBORE_
DIA
COUNTERBORE_
DEPTH
CS_DIA
GENERIC
NO.0
0.073
0.125
0.060
0.074
USCN01
NO.0
0.073
0.125
0.060
0.074
USCN02
NO.1
0.081
0.156
0.073
0.087
USCN03
NO.2
0.094
0.188
0.086
0.102
USCN04
NO.3
0.106
0.219
0.099
0.115
USCN05
NO.4
0.125
0.219
0.112
0.130
USCN06
NO.5
0.141
0.250
0.125
0.145
USCN07
NO.6
0.154
0.281
0.138
0.158
USCN08
NO.8
0.180
0.313
0.164
0.188
USCN09
NO.10
0.206
0.375
0.190
0.218
USCN10
1/4
0.266
0.438
0.250
0.278
USCN11
5/16
0.344
0.531
0.312
0.346
USCN12
3/8
0.406
0.625
0.375
0.415
USCN13
7/16
0.469
0.719
0.438
0.483
2 - 10
NOM_
SCREW_
DIA
HOLE_
DIA
COUNTERBORE_
DIA
COUNTERBORE_
DEPTH
CS_DIA
USCN14
1/2
0.531
0.813
0.500
0.552
USCN15
5/8
0.656
1.000
0.625
0.689
USCN16
3/4
0.781
1.188
0.750
0.828
USCN17
7/8
0.906
1.375
0.875
0.963
USCN18
1.031
1.625
1.000
1.100
USCN19
1 1/4
1.312
2.000
1.250
1.370
USCN20
1 1/2
1.562
2.375
1.500
1.640
USCN21
1 3/4
1.812
2.750
1.750
1.910
USCN22
2.062
3.125
2.000
2.180
Design Features
Name
Example of Hole for Socket Head Screw Normal to Plane - USCNP
Name
NOM_
SCREW_
DIA
HOLE_
DIA
COUNTERBORE_
DIA
COUNTERBORE_
DEPTH
CS_DIA
GENERIC
NO.0
0.073
0.125
0.060
0.074
USCNP01
NO.0
0.073
0.125
0.060
0.074
USCNP02
NO.1
0.081
0.156
0.073
0.087
USCNP03
NO.2
0.094
0.188
0.086
0.102
Design Features
2 - 11
Name
NOM_
SCREW_
DIA
HOLE_
DIA
COUNTERBORE_
DIA
COUNTERBORE_
DEPTH
CS_DIA
USCNP04
NO.3
0.106
0.219
0.099
0.115
USCNP05
NO.4
0.125
0.219
0.112
0.130
USCNP06
NO.5
0.141
0.250
0.125
0.145
USCNP07
NO.6
0.154
0.281
0.138
0.158
USCNP08
NO.8
0.180
0.313
0.164
0.188
USCN0P9
NO.10
0.206
0.375
0.190
0.218
USCNP10
1/4
0.266
0.438
0.250
0.278
USCNP11
5/16
0.344
0.531
0.312
0.346
USCNP12
3/8
0.406
0.625
0.375
0.415
USCNP13
7/16
0.469
0.719
0.438
0.483
USCNP14
1/2
0.531
0.813
0.500
0.552
USCNP15
5/8
0.656
1.000
0.625
0.689
USCNP16
3/4
0.781
1.188
0.750
0.828
USCNP17
7/8
0.906
1.375
0.875
0.963
USCNP18
1.031
1.625
1.000
1.100
USCNP19
1 1/4
1.312
2.000
1.250
1.370
USCNP20
1 1/2
1.562
2.375
1.500
1.640
USCNP21
1 3/4
1.812
2.750
1.750
1.910
USCNP22
2.062
3.125
2.000
2.180
Metric Design Features

The metric design features are grouped under the structure UMxx.
The naming convention is as follows:
2 - 12
xx - Identifies the type of hole or thread. The possible values are

as follows:
TC - Course Pitch Metric Threaded Holes
TF - Fine Pitch Metric Threaded Holes
SN - Holes for Metric Countersunk Head Screws
HN - Holes for Metric Hexagon Head Screws
CN - Holes for Metric Socket Head Screws
LH - Hole Grooves for Metric Retaining Rings
LS - Shaft Grooves for Metric Retaining Rings
A p at the end of the part name indicates that the feature is

normal to a plane rather than to the surface of the part.
Prompts
When you use a metric design feature in your part, you must have
already defined a datum point on the surface of the part for the
center of the feature, and a reference plane for the direction. The
system prompts you to do the following:
2. Enter the dimensions of the feature section. See Hole Types and
Family Tables for the information needed. The height value you
enter here will be measured from the surface datum point.
3. Select the center of the feature. This is a predefined datum
point.
feature. This is a datum plane or planar surface.
You can edit the values for the feature before you close creation of
the group.
Hole Types and Family Tables

Following are examples of each of the metric design features.
Included in the drawings are the dimensions and references you
should supply. Holes for screws have associated family tables,
which are listed in this section.
Design Features
2 - 13
Design Features
Threaded Holes
Example of Coarse Pitch Threaded Hole - UMTC
2 - 14
Name
NOM_
THREAD_
DIA
THREAD_
DIA
CS_DIA
MAX_
THREAD_
DIA
DRILL_
DIA
GENERIC
M1.0
1.00
1.05
1.05
0.75
UMTC01
M1.1
1.10
1.16
1.16
0.85
UMTC02
M1.2
1.20
1.26
1.26
0.95
UMTC03
M1.4
1.40
1.47
1.47
1.10
UMTC04
M1.6
1.60
1.68
1.68
1.25
UMTC05
M1.8
1.80
1.89
1.89
1.45
UMTC06
M2.0
2.00
2.10
2.10
1.60
UMTC07
M2.2
2.20
2.31
2.31
1.75
UMTC08
M2.5
2.50
2.63
2.63
2.05
UMTC09
M3.0
3.00
3.15
3.15
2.50
UMTC10
M3.5
3.50
3.68
3.68
2.90
UMTC11
M4.0
4.00
4.20
4.20
3.30
UMTC12
M4.5
4.50
4.73
4.73
3.70
NOM_
THREAD_
DIA
THREAD_
DIA
CS_DIA
MAX_
THREAD_
DIA
DRILL_
DIA
UMTC13
M5.0
5.00
5.25
5.25
4.20
UMTC14
M6.0
6.00
5.30
5.30
5.00
UMTC15
M7.0
7.00
7.35
7.35
6.00
UMTC16
M8.0
8.00
8.40
8.40
6.80
UMTC17
M9.0
9.00
9.45
9.45
7.80
UMTC18
M10.0
10.00
10.50
10.50
8.50
UMTC19
M11.0
11.00
11.55
11.55
9.50
UMTC20
M12.0
12.00
12.60
12.60
10.20
UMTC21
M14.0
14.00
14.70
14.70
12.00
UMTC22
M16.0
16.00
16.80
16.80
14.00
UMTC23
M18.0
18.00
18.90
18.90
15.50
UMTC24
M20.0
20.00
21.00
21.00
17.50
UMTC25
M22.0
22.00
23.10
23.10
19.50
UMTC26
M24.0
24.00
25.20
25.20
21.00
UMTC27
M27.0
27.00
28.35
28.35
24.00
UMTC28
M30.0
30.00
31.50
31.50
26.50
UMTC29
M33.0
33.00
34.65
34.65
29.50
UMTC30
M36.0
36.00
37.80
37.80
32.00
UMTC31
M39.0
39.00
40.95
40.95
35.00
UMTC32
M42.0
42.00
44.10
44.10
37.50
UMTC33
M45.0
45.00
47.25
47.25
40.50
UMTC34
M48.0
48.00
50.40
50.40
43.00
UMTC35
M52.0
52.00
54.60
54.60
47.00
UMTC36
M56.0
56.00
58.80
58.80
50.50
Design Features
Design Features
Name
2 - 15
Example of Fine Pitch Metric Threaded Hole - UMTF
Name
NOM_
THREAD_DIA
THREAD_
DIA
MAX_
THREAD_
DIA
CS_DIA
DRILL_
DIA
GENERIC
m2.5x0.35
2.50
2.625
2.625
2.15
UMTF01
M3.0X0.35
3.00
3.150
3.150
2.65
UMTF02
M3.5X0.35
3.50
3.675
3.675
3.15
UMTF03
M4.0X0.50
4.00
4.200
4.200
3.50
UMTF04
M4.5X0.50
4.50
4.725
4.725
4.00
UMTF05
M5.0X0.50
5.00
5.250
5.250
4.50
UMTF06
M5.5X0.50
5.50
5.775
5.775
5.00
UMTF07
M6.0X0.75
6.00
6.300
6.300
5.20
UMTF08
M7.0X0.75
7.00
7.350
7.350
6.20
UMTF09
M8.0X0.75
8.00
8.400
8.400
7.20
UMTF10
M9.0X0.75
9.00
9.450
9.450
8.20
UMTF11
M10.0X0.75
10.00
10.500
10.500
9.20
UMTF12
M11.0X0.75
11.00
11.550
11.550
10.20
UMTF13
M8.0X1.0
8.00
8.400
8.400
7.00
UMTF14
M9.0X1.0
9.00
9.450
9.450
8.00
2 - 16
NOM_
THREAD_DIA
THREAD_
DIA
MAX_
THREAD_
DIA
CS_DIA
DRILL_
DIA
UMTF15
M10.0X1.0
10.00
10.500
10.500
9.00
UMTF16
M11.0X1.0
11.00
11.550
11.550
10.00
UMTF17
M12.0X1.0
12.00
12.600
12.600
11.00
UMTF18
M14.0X1.0
14.00
14.700
14.700
13.00
UMTF19
M15.0X1.0
15.00
15.750
15.750
14.00
UMTF20
M16.0X1.0
16.00
16.800
16.800
15.00
UMTF21
M17.0X1.0
17.00
17.850
17.850
16.00
UMTF22
M18.0X1.0
18.00
18.900
18.900
17.00
UMTF23
M20.0X1.0
20.00
21.000
21.000
19.00
UMTF24
M22.0X1.0
22.00
23.100
23.100
21.00
UMTF25
M24.0X1.0
24.00
25.200
25.200
23.00
UMTF26
M25.0X1.0
25.00
26.250
26.250
24.00
UMTF27
M27.0X1.0
27.00
28.350
28.350
26.00
UMTF28
M28.0X1.0
28.00
29.400
29.400
27.00
UMTF29
M30.0X1.0
30.00
31.500
31.500
29.00
UMTF30
M10.0X1.25
10.00
10.500
10.500
8.80
UMTF31
M12.0X1.25
12.00
12.600
12.600
10.80
UMTF32
M14.0X1.25
14.00
14.700
14.700
12.80
UMTF33
M12.0X1.50
12.00
12.600
12.600
10.50
UMTF34
M14.0X1.50
14.00
14.700
14.700
12.50
UMTF35
M15.0X1.50
15.00
15.750
15.750
13.50
UMTF36
M16.0X1.50
16.00
16.800
16.800
14.50
UMTF37
M17.0X1.50
17.00
17.850
17.850
15.50
UMTF38
M18.0X1.50
18.00
18.900
18.900
16.50
UMTF39
M20.0X1.50
20.00
21.000
21.000
18.50
UMTF40
M22.0X1.50
22.00
23.100
23.100
20.50
UMTF41
M24.0X1.50
24.00
25.200
25.200
22.50
UMTF42
M25.0X1.50
25.00
26.250
26.250
23.50
UMTF43
M26.0X1.50
26.00
27.300
27.300
24.50
UMTF44
M27.0X1.50
27.00
28.350
28.350
25.50
Design Features
2 - 17
Design Features
Name
Name
NOM_
THREAD_DIA
THREAD_
DIA
MAX_
THREAD_
DIA
CS_DIA
DRILL_
DIA
UMTF45
M28.0X1.50
28.00
29.400
29.400
26.50
UMTF46
M30.0X1.50
30.00
31.500
31.500
28.50
UMTF47
M32.0X1.50
32.00
33.600
33.600
30.50
UMTF48
M33.0X1.50
33.00
34.650
34.650
31.50
UMTF49
M35.0X1.50
35.00
36.750
36.750
33.50
UMTF50
M36.0X1.50
36.00
37.800
37.800
34.50
UMTF51
M38.0X1.50
38.00
39.900
39.900
36.50
UMTF52
M39.0X1.50
39.00
40.950
40.950
37.50
UMTF53
M40.0X1.50
40.00
42.000
42.000
38.50
UMTF54
M42.0X1.50
42.00
44.100
44.100
40.50
UMTF55
M45.0X1.50
45.00
47.250
47.250
43.50
UMTF56
M48.0X1.50
48.00
50.400
50.400
46.50
UMTF57
M50.0X1.50
50.00
52.500
52.500
48.50
UMTF58
M52.0X1.50
52.00
54.600
54.600
50.50
UMTF59
M18.0X2.0
18.00
18.900
18.900
16.00
UMTF60
M20.0X2.0
20.00
21.000
21.000
18.00
UMTF61
M22.0X2.0
22.00
23.100
23.100
20.00
UMTF62
M24.0X2.0
24.00
25.200
25.200
22.00
UMTF63
M25.0X2.0
25.00
26.250
26.250
23.00
UMTF64
M27.0X2.0
27.00
28.350
28.350
25.00
UMTF65
M28.0X2.0
28.00
29.400
29.400
26.00
UMTF66
M30.0X2.0
30.00
31.500
31.500
28.00
UMTF67
M32.0X2.0
32.00
33.600
33.600
30.00
UMTF68
M33.0X2.0
33.00
34.650
34.650
31.00
UMTF69
M36.0X2.0
36.00
37.800
37.800
34.00
UMTF70
M39.0X2.0
39.00
40.950
40.950
37.00
UMTF71
M40.0X2.0
40.00
42.000
42.000
38.00
UMTF72
M42.0X2.0
42.00
44.100
44.100
40.00
UMTF73
M45.0X2.0
45.00
47.250
47.250
43.00
UMTF74
M48.0X2.0
48.00
50.400
50.400
46.00
2 - 18
NOM_
THREAD_DIA
THREAD_
DIA
MAX_
THREAD_
DIA
CS_DIA
DRILL_
DIA
UMTF75
M50.0X2.0
50.00
52.500
52.500
48.00
UMTF76
M52.0X2.0
52.00
54.600
54.600
50.00
UMTF77
M30.0X3.0
30.00
31.500
31.500
27.00
UMTF78
M33.0X3.0
33.00
34.650
34.650
30.00
UMTF79
M36.0X3.0
36.00
37.800
37.800
33.00
UMTF80
M39.0X3.0
39.00
40.950
40.950
36.00
UMTF81
M40.0X3.0
40.00
42.000
42.000
37.00
UMTF82
M42.0X3.0
42.00
44.100
44.100
39.00
UMTF83
M45.0X3.0
45.00
47.250
47.250
42.00
UMTF84
M48.0X3.0
48.00
50.400
50.400
45.00
UMTF85
M50.0X3.0
50.00
52.500
52.500
47.00
UMTF86
M52.0X3.0
52.00
54.600
54.600
49.00
UMTF87
M42.0X4.0
42.00
44.100
44.100
38.00
UMTF88
M45.0X4.0
45.00
47.250
47.250
41.00
UMTF89
M48.0X4.0
48.00
50.400
50.400
44.00
UMTF90
M52.0X4.0
52.00
54.600
54.600
48.00
Metric Countersunk Head Screws

Example of Hole for Metric Countersunk Head Screw- UMSN
Design Features
2 - 19
Design Features
Name
Name
NOM_SCREW_DIA
HEAD_HEIGHT
HOLE_DIA
GENERIC
M1.6
0.950
1.800
UMSN01
M2.0
1.100
2.400
UMSN02
M2.5
1.400
2.900
UMSN03
M3.0
1.550
3.400
UMSN04
M3.5
2.300
3.900
UMSN05
M4.0
2.600
4.500
UMSN06
M5.0
2.600
5.500
UMSN07
M6.0
3.150
6.600
UMSN08
M8.0
4.350
9.000
UMSN09
M10.0
4.700
11.000
UMSN10
M12.0
5.250
13.500
UMSN11
M14.0
6.250
15.500
UMSN12
M16.0
7.250
17.500
UMSN13
M18.0
8.000
20.000
UMSN14
M20.0
9.000
22.000
UMSN15
M22.0
10.000
24.000
UMSN16
M24.0
11.000
26.000
Example of Hole Normal to Plane for Countersunk Head Screw - UMSNP
2 - 20
NOM_SCREW_DIA
HEAD_HEIGHT
HOLE_DIA
GENERIC
M1.6
0.950
1.800
UMSNP01
M2.0
1.100
2.400
UMSNP02
M2.5
1.400
2.900
UMSNP03
M3.0
1.550
3.400
UMSNP04
M3.5
2.300
3.900
UMSNP05
M4.0
2.600
4.500
UMSNP06
M5.0
2.600
5.500
UMSNP07
M6.0
3.150
6.600
UMSNP08
M8.0
4.350
9.000
UMSNP09
M10.0
4.700
11.000
UMSNP10
M12.0
5.250
13.500
UMSNP11
M14.0
6.250
15.500
UMSNP12
M16.0
7.250
17.500
UMSNP13
M18.0
8.000
20.000
UMSNP14
M20.0
9.000
22.000
UMSNP15
M22.0
10.000
24.000
UMSNP16
M24.0
11.000
26.000
Design Features
Design Features
Name
2 - 21
Metric Hexagon Head Screws

Example of Hole for Metric Hexagon Head Screw- UMHN
Name
NOM_
BOLT_
DIA
HOLE_DIA
COUNTERBORE_
DIA
COUNTERBORE_
DEPTH
CS_DIA
GENERIC
M1.6
1.800
8.000
1.900
2.000
UMHN01
M2.0
2.400
8.000
2.300
2.600
UMHN02
M2.5
2.900
10.000
2.800
3.100
UMHN03
M3.0
3.400
10.000
3.300
3.600
UMHN04
M3.5
3.900
13.000
3.800
4.100
UMHN05
M4.0
4.500
15.000
4.400
4.700
UMHN06
M5.0
5.500
18.000
5.500
5.700
UMHN07
M6.0
6.600
20.000
6.500
6.800
UMHN08
M8.0
9.000
24.000
8.500
9.200
UMHN09
M10.0
11.000
30.000
10.500
11.200
UMHN10
M12.0
13.500
33.000
12.000
13.700
UMHN11
M14.0
15.500
36.000
13.500
15.700
UMHN12
M16.0
17.500
40.000
15.000
17.700
UMHN13
M18.0
20.000
53.000
17.000
20.200
UMHN14
M20.0
22.000
53.000
18.500
22.200
2 - 22
Name
NOM_
BOLT_
DIA
HOLE_DIA
COUNTERBORE_
DIA
COUNTERBORE_
DEPTH
CS_DIA
UMHN15
M22.0
24.000
61.000
19.500
24.200
UMHN16
M24.0
26.000
61.000
21.500
26.200
Example of Hole Normal to Plane for Metric Hexagon Head Screw- UMHNP
Design Features
Name
NOM_
BOLT_
DIA
HOLE_
DIA
COUNTERBORE_
DIA
COUNTERBORE_
DEPTH
CS_
DIA
GENERIC
M1.6
1.800
8.000
1.900
2.000
UMHNP01
M2.0
2.400
8.000
2.300
2.600
UMHNP02
M2.5
2.900
10.000
2.800
3.100
UMHNP03
M3.0
3.400
10.000
3.300
3.600
UMHNP04
M3.5
3.900
13.000
3.800
4.100
UMHNP05
M4.0
4.500
15.000
4.400
4.700
UMHNP06
M5.0
5.500
18.000
5.500
5.700
UMHNP07
M6.0
6.600
20.000
6.500
6.800
UMHNP08
M8.0
9.000
24.000
8.500
9.200
UMHNP09
M10.0
11.000
30.000
10.500
11.200
UMHNP10
M12.0
13.500
33.000
12.000
13.700
Design Features
2 - 23
Name
NOM_
BOLT_
DIA
HOLE_
DIA
COUNTERBORE_
DIA
COUNTERBORE_
DEPTH
CS_
DIA
UMHNP11
M14.0
15.500
36.000
13.500
15.700
UMHNP12
M16.0
17.500
40.000
15.000
17.700
UMHNP13
M18.0
20.000
53.000
17.000
20.200
UMHNP14
M20.0
22.000
53.000
18.500
22.200
UMHNP15
M22.0
24.000
61.000
19.500
24.200
UMHNP16
M24.0
26.000
61.000
21.500
26.200
Socket Head Screws

Example of Hole for Metric Socket Head Screw - UMCN
Name
NOM_DIA_
BOLT
HOLE_
DIA
COUNTERBORE_
DIA
COUNTERBORE_
DEPTH
CS_DIA
GENERIC
m1.0
1.20
3.00
1.00
1.40
UMCN01
M1.2
1.40
4.00
1.20
1.60
UMCN02
M1.4
1.60
4.00
1.40
1.80
UMCN03
M1.6
1.80
5.00
1.60
2.00
UMCN04
M1.8
2.10
5.00
1.80
2.20
2 - 24
NOM_DIA_
BOLT
HOLE_
DIA
COUNTERBORE_
DIA
COUNTERBORE_
DEPTH
CS_DIA
UMCN05
M2.0
2.40
7.00
2.00
2.60
UMCN06
M2.5
2.90
8.00
2.50
3.10
UMCN07
M3.0
3.40
9.00
3.00
3.60
UMCN08
M3.5
3.90
10.00
3.50
4.10
UMCN09
M4.0
4.50
11.00
4.00
4.70
UMCN10
M4.5
5.00
13.00
4.50
5.20
UMCN11
M5.0
5.50
13.00
5.00
5.70
UMCN12
M6.0
6.60
15.00
6.00
6.80
UMCN13
M7.0
7.60
18.00
7.00
7.80
UMCN14
M8.0
9.00
20.00
8.00
9.20
UMCN15
M10.0
11.00
24.00
10.00
11.20
UMCN16
M12.0
13.50
28.00
12.00
14.20
UMCN17
M14.0
15.50
32.00
14.00
16.20
UMCN18
M16.0
17.50
35.00
16.00
18.20
UMCN19
M18.0
20.00
39.00
18.00
20.20
UMCN20
M20.0
22.00
43.00
20.00
22.40
UMCN21
M22.0
24.00
46.00
22.00
24.40
UMCN22
M24.0
26.00
50.00
24.00
26.40
UMCN23
M27.0
30.00
55.00
27.00
30.40
UMCN24
M30.0
33.00
62.00
30.00
33.40
UMCN25
M33.0
36.00
66.00
33.00
36.40
UMCN26
M36.0
39.00
72.00
36.00
39.40
UMCN27
M39.0
42.00
76.00
39.00
42.40
UMCN28
M42.0
45.00
82.00
42.00
45.60
UMCN29
M45.0
48.00
87.00
45.00
48.60
UMCN30
M48.0
52.00
93.00
48.00
52.60
UMCN31
M52.0
56.00
100.00
52.00
56.60
UMCN32
M56.0
62.00
110.00
56.00
63.00
UMCN33
M60.0
66.00
115.00
60.00
67.00
UMCN34
M64.0
70.00
122.00
64.00
71.00
Design Features
Design Features
Name
2 - 25
Name
NOM_DIA_
BOLT
HOLE_
DIA
COUNTERBORE_
DIA
COUNTERBORE_
DEPTH
CS_DIA
UMCN35
M68.0
74.00
127.00
68.00
75.00
UMCN36
M72.0
78.00
133.00
72.00
79.00
UMCN37
M76.0
82.00
143.00
76.00
83.00
UMCN38
M80.0
86.00
148.00
80.00
87.00
UMCN39
M85.0
91.00
158.00
85.00
92.00
UMCN40
M90.0
96.00
167.00
90.00
97.00
UMCN41
M95.0
101.00
176.00
95.00
102.00
UMCN42
M100.0
107.00
185.00
100.00
108.00
UMCN43
M105.0
112.00
195.00
105.00
113.00
UMCN44
M110.0
117.00
204.00
110.00
118.00
UMCN45
M115.0
122.00
213.00
115.00
123.00
UMCN46
M120.0
127.00
222.00
120.00
128.00
UMCN47
M125.0
132.00
232.00
125.00
133.00
UMCN48
M130.0
137.00
241.00
130.00
138.00
UMCN49
M140.0
147.00
259.00
140.00
148.00
UMCN50
M150.0
158.00
278.00
150.00
159.00
Example of Hole Normal to Plane for Metric Socket Head Screw - UMCNP
2 - 26
NOM_DIA_
BOLT
HOLE_
DIA
COUNTERBORE_
DIA
COUNTERBORE_
DEPTH
CS_DIA
GENERIC
m1.0
1.20
3.00
1.00
1.40
UMCNP01
M1.2
1.40
4.00
1.20
1.60
UMCNP02
M1.4
1.60
4.00
1.40
1.80
UMCNP03
M1.6
1.80
5.00
1.60
2.00
UMCNP04
M1.8
2.10
5.00
1.80
2.20
UMCNP05
M2.0
2.40
7.00
2.00
2.60
UMCNP06
M2.5
2.90
8.00
2.50
3.10
UMCNP07
M3.0
3.40
9.00
3.00
3.60
UMCNP08
M3.5
3.90
10.00
3.50
4.10
UMCNP09
M4.0
4.50
11.00
4.00
4.70
UMCNP10
M4.5
5.00
13.00
4.50
5.20
UMCNP11
M5.0
5.50
13.00
5.00
5.70
UMCNP12
M6.0
6.60
15.00
6.00
6.80
UMCNP13
M7.0
7.60
18.00
7.00
7.80
UMCNP14
M8.0
9.00
20.00
8.00
9.20
UMCNP15
M10.0
11.00
24.00
10.00
11.20
UMCNP16
M12.0
13.50
28.00
12.00
14.20
UMCNP17
M14.0
15.50
32.00
14.00
16.20
UMCNP18
M16.0
17.50
35.00
16.00
18.20
UMCNP19
M18.0
20.00
39.00
18.00
20.20
UMCNP20
M20.0
22.00
43.00
20.00
22.40
UMCNP21
M22.0
24.00
46.00
22.00
24.40
UMCNP22
M24.0
26.00
50.00
24.00
26.40
UMCNP23
M27.0
30.00
55.00
27.00
30.40
UMCNP24
M30.0
33.00
62.00
30.00
33.40
UMCNP25
M33.0
36.00
66.00
33.00
36.40
UMCNP26
M36.0
39.00
72.00
36.00
39.40
UMCNP27
M39.0
42.00
76.00
39.00
42.40
UMCNP28
M42.0
45.00
82.00
42.00
45.60
Design Features
Design Features
Name
2 - 27
Name
NOM_DIA_
BOLT
HOLE_
DIA
COUNTERBORE_
DIA
COUNTERBORE_
DEPTH
CS_DIA
UMCNP29
M45.0
48.00
87.00
45.00
48.60
UMCNP30
M48.0
52.00
93.00
48.00
52.60
UMCNP31
M52.0
56.00
100.00
52.00
56.60
UMCNP32
M56.0
62.00
110.00
56.00
63.00
UMCNP33
M60.0
66.00
115.00
60.00
67.00
UMCNP34
M64.0
70.00
122.00
64.00
71.00
UMCNP35
M68.0
74.00
127.00
68.00
75.00
UMCNP36
M72.0
78.00
133.00
72.00
79.00
UMCNP37
M76.0
82.00
143.00
76.00
83.00
UMCNP38
M80.0
86.00
148.00
80.00
87.00
UMCNP39
M85.0
91.00
158.00
85.00
92.00
UMCNP40
M90.0
96.00
167.00
90.00
97.00
UMCNP41
M95.0
101.00
176.00
95.00
102.00
UMCNP42
M100.0
107.00
185.00
100.00
108.00
UMCNP43
M105.0
112.00
195.00
105.00
113.00
UMCNP44
M110.0
117.00
204.00
110.00
118.00
UMCNP45
M115.0
122.00
213.00
115.00
123.00
UMCNP46
M120.0
127.00
222.00
120.00
128.00
UMCNP47
M125.0
132.00
232.00
125.00
133.00
UMCNP48
M130.0
137.00
241.00
130.00
138.00
UMCNP49
M140.0
147.00
259.00
140.00
148.00
UMCNP50
M150.0
158.00
278.00
150.00
159.00
2 - 28
Grooves for Metric Retaining Rings

Example of Hole Groove for Metric Retaining Ring - UMLH
Design Features
Name
HOLE_DIA
GRV_DIA
GRV_WIDTH
GENERIC
M10.0
10.400
1.200
UMLH01
M11.0
11.400
1.200
UMLH02
M15.0
15.700
1.200
UMLH03
M16.0
16.800
1.200
UMLH04
M19.0
20.000
1.200
UMLH05
M20.0
21.000
1.200
UMLH06
M22.0
23.000
1.200
UMLH07
M25.0
26.200
1.400
UMLH08
M28.0
29.400
1.400
UMLH09
M30.0
31.400
1.400
UMLH10
M32.0
33.700
1.400
UMLH11
M35.0
37.000
1.700
UMLH12
M40.0
42.500
2.000
UMLH13
M42.0
44.500
2.000
UMLH14
M47.0
49.500
2.000
Design Features
2 - 29
Name
HOLE_DIA
GRV_DIA
GRV_WIDTH
UMLH15
M50.0
53.000
2.300
UMLH16
M52.0
55.000
2.300
UMLH17
M55.0
58.000
2.300
UMLH18
M60.0
63.000
2.300
UMLH19
M65.0
68.000
2.800
UMLH20
M70.0
73.000
2.800
UMLH21
M75.0
78.000
2.800
UMLH22
M100.0
103.500
3.300
Example of Shaft Groove for Metric Retaining Rings - UMLS
2 - 30
Name
ROD_DIA
GRV_DIA
GRV_WIDTH
GENERIC
M6.0
5.700
0.900
UMLS01
6.0
5.700
0.900
UMLS02
7.0
6.700
1.000
UMLS03
8.0
7.600
1.000
UMLS04
10.0
9.600
1.200
UMLS05
11.0
10.500
1.200
ROD_DIA
GRV_DIA
GRV_WIDTH
UMLS06
12.0
11.500
1.200
UMLS07
13.0
12.400
1.200
UMLS08
14.0
13.400
1.200
UMLS09
15.0
14.300
1.200
UMLS10
16.0
15.200
1.200
UMLS11
17.0
16.200
1.200
UMLS12
18.0
17.000
1.400
UMLS13
19.0
18.000
1.400
UMLS14
20.0
19.000
1.400
UMLS15
22.0
21.000
1.400
UMLS16
24.0
22.900
1.400
UMLS17
25.0
23.900
1.400
UMLS18
30.0
28.600
1.700
UMLS19
32.0
30.300
1.700
UMLS20
34.0
32.300
1.700
UMLS21
35.0
33.000
1.700
UMLS22
38.0
36.000
2.000
UMLS23
40.0
37.500
2.000
UMLS24
50.0
47.000
2.300
UMLS25
52.0
49.000
2.300
UMLS26
55.0
52.000
2.300
UMLS27
56.0
53.000
2.300
UMLS28
60.0
57.000
2.300
UMLS29
65.0
62.000
2.800
UMLS30
70.0
67.000
2.800
UMLS31
75.0
72.000
2.800
Design Features
Design Features
Name
2 - 31
2 - 32
3
Tube Forming Features
Tube forming features are designed for piping and tube parts,
adding such features as flared and crimped ends to the parts.
Pro/LIBRARY contains the following tube forming feature types:
TFB - Beaded
TFF - Flared
TFN - Necked
TFL - Flattened
TFE - Expanded
3-1
Placement
All tube features are created and placed the same; they are placed
coaxially and you have to match the diameter of the feature to the
diameter of your cylinder to align the two. You need an axis and a
reference to place these features.
When you use a tube forming feature group in your part, the system
prompts you to do the following:
1. Select the placement and scaling options.
2. Enter the dimensions of the feature, including the offset from
edge (see the appropriate figures for the desired feature).
3. Select the outer tube surface.
4. Select the attachment surface for the tube feature.
5. Select the reference datum plane.
6. Select the inner tube surface.
7. Select the direction for viewing the sketching plane. For all tube
features, with the exception of the Flattened feature (TFL), the
arrow can point in either direction. For the TFL group, flip the
arrow to point away from the tube face.
8. Select the upward direction of the horizontal plane for the tube
forming feature. Flip the arrow to point towards where the
feature is to be created.
3-2
Shapes
Beaded Tube Forming Feature - UTFB
Tube Forming
Features
3-3
Flared Tube Forming Feature - UTFF
3-4
Necked Tube Forming Feature - UTFN
Tube Forming
Features
3-5
Flattened Tube Forming Feature - UTFL
3-6
Expanded Tube Forming Feature - UTFE
Tube Forming
Features
3-7
3-8
4
Molding Features
The Pro/LIBRARY directory featurelib/mold_udf contains runners

and gates in standardized shapes. These are useful in mold design.
4-1
Runners
Pro/LIBRARY contains runners in the subdirectory runners. There
are four basic shapes of runners, as demonstrated in this section.
Identify a reference curve and reference plane in your part before
you add a runner.
Prompts
When you use a runner in your part, you must have already defined
a reference curve somewhere in the part for the path of the runner,
and a reference plane for the center or top of the feature. For a
cylindrical or a hexagonal runner, a reference plane on the surface
will create a semi-circular or semi-hexagonal trough. The reference
plane allows you to determine the depth of the runner in the part.
1. Select placement and scaling options for the runner.
2. Enter the height or diameter for the feature, as indicated in the
examples.
3. Determine the display options for invariable dimensions.
4. Select the reference curve endpoints.
5. Select the reference plane.
Shapes
There are four basic shapes for runners, as demonstrated in the
following figures. The examples given indicate the information you
will need to provide.
4-2
Example of Cylindrical Runner - RUN_CYL
Molding Features
Molding Features
4-3
Example of Trapezoidal Runner - RUN_TRAP
4-4
Example of Hexagonal Runner - RUN_HEX
Molding Features
Molding Features
4-5
Example of Rounded Trapezoidal Runner - ROUND_TRAP
4-6
Gates
Pro/LIBRARY contains gates in the subdirectory gates. There are
four basic types of gates, as demonstrated in this section. Identify a
runner and reference plane in your part before you add a gate.
Prompts
When you use a gate in your part, you must have already defined a
runner and a reference plane.
1. Select placement and scaling options for the gate.
2. Enter the dimensions of the gate, as indicated in the examples.
3. Select the reference curve end-point and other reference
information, as indicated in the examples.
4. Determine the display options for invariable dimensions.
5. Select the other information.
Shapes
Molding Features
4-7
Molding Features
There are four basic shapes for gates, as demonstrated in the

following figures. The examples given indicate the information you
will need to provide.
Example of Tab Gate - TAB_GATE
Example of Round Edge Gate- ROUND_EDGE_GATE
4-8
Example of Pin Gate- PIN_GATE
Molding Features
Molding Features
4-9
Example of Subsurface Gate - SUBSURFACE_GATE
4 - 10
5
Sheet Metal Design Features
The Pro/LIBRARY directory featurelib/stm_udf contains louvers,

beads, and offsets in standardized shapes. These parts are useful in
sheet metal design. You add these features as parts in a group or
assembly.
5-1
Louvers
There are three basic shapes of louvers that you can use in your
parts, as demonstrated in this section. Louvers are located in the
subdirectory /louvers.
Louver Placement
When you use a louver in your assembly, you should do the
following:
1. Retrieve the louver as a part.
2. Change the dimensions.
3. Assemble the part.
Shapes
Example of Closed Flat Louver - CLOSE_FLAT_LOUVER
5-2
Example of Open Flat Louver - OPEN_FLAT_LOUVER
Sheet Metal Design

Features
5-3
Example of Closed Round Louver- CLOSE_ROUND_LOUVER
Offsets
There are four kinds of offsets that you can use in your parts, as
demonstrated on the following pages. Offsets are located in the
subdirectory /offsets.
Offset Placement
When you use an offset in your part, you should do the following:
1. Retrieve the offset as a part.
5-4
Shapes
Example of Closed Offset - CLOSE_OFFSET
Sheet Metal Design

Features
5-5
Example of Open Offset - OPEN_OFFSET
5-6
Example of Cutout with Offset - CUTOUT
Sheet Metal Design

Features
5-7
Example of Rectangular Offset - RECTANG_OFFSET
Beads
There are three kinds of beads that you can use in your parts, as
demonstrated in the following pages. Beads are located in the
subdirectory /beads.
Bead Placement
When you use a bead in your part, you should do the following:
1. Retrieve the bead as a part.
5-8
Shapes
Example of Round Bead - ROUND_BEAD
Sheet Metal Design

Features
5-9
Example of 60 Degree V-Shape Bead - V60_BEAD
5 - 10
Example of 90 Degree Shaped Bead - V90_BEAD
Sheet Metal Design

Features
5 - 11
5 - 12
Section 2
ANSI Inch Series Parts Library

Section 2 of the BASIC LIBRARY catalog contains standardized
parts ready for you to use in your assemblies. BASIC LIBRARY
standardized parts correspond to ANSI, USAS, and other
standards. The corresponding standard is noted with each part.
6
ANSI Inch Pins
6-1
Cotter Pin
Generic part name: PINA

Notes:
Corresponds to ANSI B18.8.1-1972 (R1977).
Lengths given as: from - to, incremented by.
Enter the NOM_SIZE value exactly as shown.
NOM_SIZE
A
Dia.
C
Head Dia.
D
Prong
Length
LENGTHS
.03125
0.032
0.060
0.010
0.125 - 3, 1/8
.046875
0.048
0.090
0.020
0.125 - 3, 1/8
.0625
0.060
0.120
0.030
0.25 -3, 1/8
.078125
0.076
0.160
0.040
0.25 -3, 1/8
.09375
0.090
0.190
0.040
0.375 - 3, 1/8
.109375
0.104
0.220
0.050
0.375 - 3, 1/8
.125
0.120
0.250
0.060
0.5 - 3, 1/8
.140625
0.134
0.280
0.060
0.5 - 3, 1/8
.15625
0.150
0.310
0.070
0.625 - 3, 1/8
6-2
Clevis Pin
Generic part name: PINB

Notes:
BASIC
A
DIA Shank
Enter the BASIC DIA value exactly as shown.
B
Head
Dia.
C
D
Head
Head
Height Chamf
F
Point
Dia.
G
Pin
Length
E
Hole
Dia.
H
Head
to
Hole
Ctr.
L
Point
Length
0.1860
0.3200
0.0700
0.0200
0.1500
0.5800
0.0880
0.5040
0.0550
.25
0.2480
0.3800
0.1000
0.0300
0.2100
0.7700
0.0880
0.6920
0.0880
.3125
0.3110
0.4400
0.1000
0.0300
0.2600
0.9400
0.1190
0.8320
0.0710
.375
0.3730
0.5100
0.1300
0.0300
0.3300
1.0600
0.1190
0.9580
0.0710
.4375
0.4360
0.5700
0.1600
0.0400
0.3900
1.1900
0.1190
1.0820
0.0710
.5
0.4960
0.6300
0.1600
0.0400
0.4400
1.3600
0.1510
1.2230
0.0890
.625
0.6210
0.8200
0.2100
0.0600
0.5600
1.6100
0.1510
1.4730
0.0890
.75
0.7460
0.9400
0.2600
0.0700
0.6800
1.9100
0.1820
1.7390
0.1100
ANSI Inch Pins
6-3
ANSI Inch Pins
.1875
BASIC
A
DIA Shank
B
Head
Dia.
C
D
Head
Head
Height Chamf
F
Point
Dia.
G
Pin
Length
E
Hole
Dia.
H
Head
to
Hole
Ctr.
L
Point
Length
.875
0.8710
1.0400
0.3200
0.0900
0.8000
2.1600
0.1820
1.9890
0.1100
0.9960
1.1900
0.3500
0.1000
0.9300
2.4100
0.1820
2.2390
0.1100
6-4
7
ANSI Inch Keys
7-1
Square Parallel Key
WIDTH
Generic Name: KAA

Notes:
7-2
Corresponds to standard USAS B17.1-1967.
Enter the WIDTH value exactly as shown.
WIDTH
L
Lengths
.0938
0.5 - 1.5, 0.25
.125
0.5 - 2.0, 0.25
.1875
0.75 - 2.5, 0.25
.25
0.75 - 3.0, 0.25
.3125
0.75 - 3.5, 0.25
.375
1.0 - 4.0, 0.25
.5
1.5 - 5.0, 0.25
.625
2.0 - 6.0, 0.5
.75
3.0 - 10.0, 0.5
.875
4.0 - 12.0, 1.0
4.0 - 16.0, 1.0
1.25
5.0 - 16.0, 1.0
1.5
5.0 - 20.0, 1.25
1.75
6.0 - 21.0, 1.5
6.0 - 24.0, 2.0
L
Lengths
2.5
6.0 - 24.0, 2.0
8.0 - 24.0, 2.0
3.5
8.0 - 24.0, 2.0
ANSI Inch Keys
WIDTH
Rectangular Parallel Key
Generic Name: KBB

Notes:
ANSI Inch Keys
WIDTH
H
Height
L
Lengths
.125
0.0938
0.5 - 1.5, 0.25
.1875
0.1250
0.5 - 2.0, 0.25
.25
0.1875
0.75 - 2.5, 0.25
.3125
0.2500
0.75 - 3.0, 0.25
.375
0.2500
1.0 - 4.0, 0.25
.5
0.3750
2.5 - 6.0, 0.5
.625
0.4375
3.0 - 7.0, 0.5
.75
0.5000
3.5 - 8.0, 0.5
.875
0.6250
3.5 - 8.0, 0.5
7-3
WIDTH
H
Height
L
Lengths
0.7500
4.0 - 10.0, 0.5
1.25
0.8750
4.0 - 12.0, 0.5
1.5
1.0000
4.0 - 14.0, 1.0
1.75
1.5000
4.0 - 14.0, 1.0
1.5000
5.0 - 15.0, 1.0
2.5
1.7500
5.0 - 15.0, 1.0
2.0000
6.0 - 16.0, 1.0
3.5
2.5000
6.0 - 16.0, 1.0
3.0000
10.0 - 28.0, 2.0
3.5000
10.0 - 30.0, 2.0
4.0000
10.0 - 30.0, 2.0
5.0000
10.0 - 30.0, 2.0
Square Plain Tapered Key
Generic Name: KCC

Notes:
7-4
Key height (H) is equal to its width.
L
Lengths
.0938
0.5 - 1.5, 0.25
.125
0.5 - 2.0, 0.25
.1875
0.75 - 2.5, 0.25
.25
0.75 - 3.0, 0.25
.3125
0.75 - 3.5, 0.25
.375
1.0 - 4.0, 0.25
.5
1.5 - 5.0, 0.25
.625
2.0 - 6.0, 0.5
.75
3.0 - 10.0, 0.5
.875
4.0 - 12.0, 1.0
4.0 - 16.0, 1.0
1.25
5.0 - 16.0, 1.0
1.5
5.0 - 22.5, 1.25
1.75
6.0 - 21.0, 1.5
6.0 - 24.0, 2.0
2.5
6.0 - 24.0, 2.0
8.0 - 24.0, 2.0
3.5
8.0 - 24.0, 2.0
ANSI Inch Keys
WIDTH
Rectangular Plain Tapered Key

WIDTH
ANSI Inch Keys
WIDTH
7-5
Generic Name: KDD

Notes:
7-6
WIDTH
H
Height
L
Lengths
.125
0.0938
0.5 - 1.5, 0.25
.1875
0.1250
0.5 - 2.0, 0.25
.25
0.1875
0.75 - 2.5, 0.25
.3125
0.2500
0.75 - 3.0, 0.25
.375
0.2500
1.0 - 4.0, 0.25
.5
0.3750
2.5 - 6.0, 0.5
.625
0.4375
3.0 - 7.0, 0.5
.75
0.5000
3.5 - 8.0, 0.5
.875
0.6250
3.5 - 8.5, 0.5
0.7500
4.0 - 10.0, 0.5
1.25
0.8750
4.0 - 12.0, 0.5
1.5
1.0000
4.0 - 14.0, 1.0
1.75
1.5000
4.0 - 14.0, 1.0
1.5000
5.0 - 15.0, 1.0
2.5
1.7500
5.0 - 15.0, 1.0
2.0000
6.0 - 16.0, 1.0
3.5
2.5000
6.0 - 16.0, 1.0
3.0000
10.0 - 28.0, 2.0
3.5000
10.0 - 30.0, 2.0
4.0000
10.0 - 30.0, 2.0
5.0000
10.0 - 30.0, 2.0
Square Gib-Head Taper Key

ANSI Inch Keys
B/2
WIDTH
Generic Name: KEE

Notes:
WIDTH
H
Height
L
Lengths
.125
0.1250
0.2500
0.2500
0.75 - 3.0, 0.25
.1875
0.1875
0.3125
0.3125
1.0 - 3.5, 0.25
.25
0.2500
0.4375
0.3750
1.0 - 4.0, 0.25
.3125
0.3125
0.5000
0.4375
1.5 - 4.5, 0.25
.375
0.3750
0.6250
0.5000
2.0 - 6.0, 0.5
.5
0.5000
0.8750
0.6250
2.5 - 7.0, 0.5
.625
0.6250
1.0000
0.7500
3.0 - 7.5, 0.5
.75
0.7500
1.2500
0.8750
3.5 - 8.0, 0.5
.875
0.8750
1.3750
1.0000
4.5 - 10.0, 0.5
1.0000
1.6250
1.1250
5.0 - 10.0, 0.5
1.25
1.2500
2.0000
1.4375
5.0 - 12.0, 0.5
1.5
1.5000
2.3750
1.7500
5.0 - 14.0, 1.0
1.75
1.7500
2.7500
2.0000
5.0 - 14.0, 1.0
2.0000
3.5000
2.2500
5.0 - 15.0, 1.0
ANSI Inch Keys
7-7
WIDTH
H
Height
L
Lengths
2.5
2.5000
4.0000
3.0000
5.0 - 15.0, 1.0
3.0000
5.0000
3.5000
6.0 - 16.0, 1.0
3.5
3.5000
6.0000
4.0000
6.0 - 16.0, 1.0
Rectangular Gib-Head Taper Key

WIDTH
B/2
WIDTH
Generic Name: KFF

Notes:
7-8
Enter the WIDTH values exactly as shown.
WIDTH
H
Height
L
Lengths
.125
0.0938
0.1875
0.1250
0.75 - 3.0, 0.25
.1875
0.2500
0.2500
0.2500
1.0 - 3.5, 0.25
.25
0.1875
0.3125
0.3125
1.0 - 4.0, 0.25
.3125
0.2500
0.4375
0.3750
1.5 - 4.5, 0.25
.375
0.2500
0.4375
0.3750
2.0 - 6.0, 0.5
.5
0.3750
0.6250
0.5000
2.5 - 7.0, 0.5
.625
0.4375
0.7500
0.5625
3.0 - 7.5, 0.5
H
Height
L
Lengths
.75
0.5000
0.8750
0.6250
3.5 - 8.0, 0.5
.875
0.6250
1.0000
0.7500
4.5 - 10.0, 0.5
0.7500
1.2500
0.8750
5.0 - 10.0, 0.5
1.25
0.8750
1.3750
1.0000
5.0 - 12.0, 0.5
1.5
1.0000
1.6250
1.1250
5.0 - 14.0, 1.0
1.75
1.5000
2.3750
1.7500
5.0 - 14.0, 1.0
1.5000
2.3750
1.7500
5.0 - 15.0, 1.0
2.5
1.7500
2.7500
2.0000
5.0 - 15.0, 1.0
2.0000
3.5000
2.2500
6.0 - 16.0, 1.0
3.5
2.5000
4.0000
3.0000
6.0 - 16.0, 1.0
ANSI Inch Keys
ANSI Inch Keys
WIDTH
7-9
7 - 10
8
ANSI Inch Large Rivets
8-1
Button Head Rivet

L
BASIC_DIA
Generic part name: RAA

Notes:
8-2
Corresponds to standard ANSI B18.1.2-1972.
Enter the BASIC_DIA value exactly as shown.
BASIC_DIA
A
Head Dia
H
Head
Height
L
Lengths
.5
0.8750
0.3750
1.0 - 1.75, 0.125;

1.75 - 2.25, 0.25;
2.25 - 2.5, 0.125;
2.5 - 4.75, 0.25
.625
1.0940
0.4690
1.0 - 5.75, 0.25
.75
1.3120
0.5620
1.25 - 6.75, 0.25
.875
1.5310
0.6560
1.25 - 8.25, 0.25
1.7500
0.7500
1.25 - 8.25, 0.25
1.125
1.9690
0.8440
2.0 - 8.25, 0.25
1.25
2.1880
0.9380
2.0 - 8.5, 0.25
1.375
2.4060
1.0310
2.0 - 8.5, 0.25
1.5
2.6250
1.1250
2.0 - 8.5, 0.25
1.625
2.8440
1.2190
2.0 - 8.5, 0.25
1.75
3.0620
1.3120
2.0 - 8.5, 0.25
High Button Head (Acorn) Rivet

L
ANSI Inch Large

Rivets
BASIC_DIA
Generic part name: RBB

Notes:
BASIC_DIA
A
Head Dia
H
Head
Height
L
Lengths
.5
0.7810
0.5000
1.0 - 1.75, 0.125;

1.75 - 2.25, 0.25;
2.25 - 2.5, 0.125;
2.5 - 4.75, 0.25
.625
0.9690
0.5940
1.0 - 5.75, 0.25
.75
1.1560
0.6880
1.25 - 6.75, 0.25
.875
1.3440
0.7810
1.25 - 8.25, 0.25
1.5310
0.8750
1.25 - 8.25, 0.25
1.125
1.7190
1.9690
2.0 - 8.25, 0.25
1.25
1.9060
1.0620
2.0 - 8.5, 0.25
1.375
2.0940
1.1560
2.0 - 8.5, 0.25
1.5
2.2810
1.2500
2.0 - 8.5, 0.25
1.625
2.4690
1.3440
2.0 - 8.5, 0.25
1.75
2.6560
1.4380
2.0 - 8.5, 0.25
8-3
Cone Head Rivet
Generic part name: RCC

Notes:
8-4
BASIC_
DIA
A
Major
Head
Dia
B
Minor
Head
Dia
H
Head
Height
L
Lengths
.5
0.8750
0.4690
0.4380
1.0 - 1.75, 0.125

1.75 - 2.25, 0.25
2.25 - 4.75, 0.25
.625
1.0940
0.5860
0.5470
1.0 - 5.75, 0.25
.75
1.3120
0.7030
0.6560
1.25 - 6.75, 0.25
.875
1.5310
0.8200
0.7660
1.25 - 8.25, 0.25
1.7500
0.9380
0.8750
1.25 - 8.25, 0.25
1.125
1.9690
1.0550
0.9840
2.0 - 8.25, 0.25
1.25
2.1880
1.1720
1.0940
2.0 - 8.5, 0.25
1.375
2.4060
1.2900
1.2030
2.0 - 8.5, 0.25
1.5
2.6250
1.4060
1.3120
2.0 - 8.5, 0.25
1.625
2.8440
1.5240
1.4220
2.0 - 8.5, 0.25
1.75
3.0620
1.6410
1.5310
2.0 - 8.5, 0.25
Pan Head Rivet
ANSI Inch Large

Rivets
Generic part name: RDD

Notes:
BASIC_
DIA
A
Major
Head
Dia
B
Minor
Head
Dia
H
Head
Height
L
Lengths
.5
0.8000
0.5000
0.3500
1.0 - 1.75, 0.125

1.75 - 2.25, 0.25
2.25 - 4.75, 0.25
.625
1.0000
0.6250
0.4380
1.0 - 5.75, 0.25
.75
1.2000
0.7500
0.5250
1.25 - 6.75, 0.25
.875
1.4000
0.8750
0.6120
1.25 - 8.25, 0.25
1.6000
1.0000
0.7000
1.25 - 8.25, 0.25
1.125
1.8000
1.1250
0.7880
2.0 - 8.25, 0.25
1.25
2.0000
1.2500
0.8750
2.0 - 8.5, 0.25
1.375
2.2000
1.3750
0.9620
2.0 - 8.5, 0.25
1.5
2.4000
1.5000
1.0500
2.0 - 8.5, 0.25
1.625
2.6000
1.6250
1.1380
2.0 - 8.5, 0.25
1.75
2.8000
1.7500
1.2250
2.0 - 8.5, 0.25
8-5
Flat Countersunk Head Rivet

L
BASIC_DIA
Generic part name: REE

Notes:
8-6
BASIC_DIA
A
Head Dia
L
Lengths
.5
0.9360
1.0 - 1.75, 0.125;

1.75 - 2.25, 0.25;
2.25 - 4.75, 0.25
.625
1.1940
1.0 - 5.75, 0.25
.75
1.4210
1.25 - 6.75, 0.25
.875
1.6470
1.25 - 8.25, 0.25
1.8730
1.25 - 8.25, 0.25
1.125
2.1140
2.0 - 8.25, 0.25
1.25
2.3400
2.0 - 8.5, 0.25
1.375
2.5670
2.0 - 8.5, 0.25
1.5
2.7930
2.0 - 8.5, 0.25
1.625
3.0190
2.0 - 8.5, 0.25
1.75
3.2620
2.0 - 8.5, 0.25
Oval Countersunk Head Rivet

C
L
ANSI Inch Large
Rivets
BASIC_DIA
Generic part name: RFF

Notes:
BASIC_
DIA
A
Head
Dia
C
Crown
Height
L
Lengths
.5
0.9360
0.0950
1.0 - 1.75, 0.125;

1.75 - 2.25, 0.25;
2.25 - 4.75, 0.25
.625
1.1940
0.1190
1.0 - 5.75, 0.25
.75
1.4210
0.1420
1.25 - 6.75, 0.25
.875
1.6470
0.1660
1.25 - 8.25, 0.25
1.8730
0.1900
1.25 - 8.25, 0.25
1.125
2.1140
0.2140
2.0 - 8.25, 0.25
1.25
2.3400
0.2380
2.0 - 8.5, 0.25
1.375
2.5670
0.2610
2.0 - 8.5, 0.25
1.5
2.7930
0.2850
2.0 - 8.5, 0.25
1.625
3.0190
0.3090
2.0 - 8.5, 0.25
1.75
3.2620
0.3320
2.0 - 8.5, 0.25
8-7
8-8
9
ANSI Inch Lock Washers
The BASIC_DIA values used in callouts usually correspond to the

decimal value of the nominal diameter of the part (for example,
.25). In some cases, however, the parts are called out by a number,
such as NO.1. Those numbers correspond to the following values
of the nominal diameter:
BASIC_DIA
Nominal Diameter
NO.0000
0.0210
NO.000
0.0340
NO.00
0.0470
NO.0
0.0600
NO.1
0.0730
NO.2
0.0860
NO.3
0.0990
NO.4
0.1120
NO.5
0.1250
NO.6
0.1380
NO.8
0.1640
NO.10
0.1900
NO.12
0.2160
9-1
Regular Helical Spring Lock Washer
T
B
OUT_DIA
IN_DIA
A
Generic part name: WHS

Notes:
9-2
Corresponds to ANSI B18.21.1-1972.
BASIC_DIA
A
Inside
Dia.
B
Outside
Dia.
T
Thickness
NO.2
0.0940
0.1720
0.0200
NO.3
0.1070
0.1950
0.0250
NO.4
0.1200
0.2090
0.0250
NO.5
0.1330
0.2360
0.0310
NO.6
0.1480
0.2500
0.0310
NO.8
0.1740
0.2930
0.0400
NO.10
0.2000
0.3340
0.0470
NO.12
0.2270
0.3770
0.0560
.25
0.2620
0.4890
0.0620
.3125
0.3260
0.5860
0.0780
.375
0.3900
0.6830
0.0940
.4375
0.4550
0.7790
0.1090
.5
0.5180
0.8730
0.1250
.5625
0.5820
0.9710
0.1410
.625
0.6500
1.0790
0.1560
A
Inside
Dia.
B
Outside
Dia.
T
Thickness
.6875
0.7130
1.1760
0.1720
.75
0.7750
1.2710
0.1880
.875
0.9050
1.4640
0.2190
.9375
0.9700
1.5600
0.2340
1.0420
1.6610
0.2500
1.0625
1.1070
1.7560
0.2660
1.125
1.1720
1.8530
0.2810
1.1875
1.2370
1.9500
0.2970
1.25
1.3020
2.0450
0.3120
1.3125
1.3660
2.1410
0.3280
1.375
1.4320
2.2390
0.3440
1.4375
1.4970
2.3340
0.3590
1.5
1.5610
2.4300
0.3750
ANSI Inch Lock

Washers
BASIC_DIA
Extra Duty Helical Spring Lock Washer
T
B
A
Generic part name: WED

Notes:
9-3
9-4
BASIC_DIA
A
Inside
Dia.
B
Outside
Dia.
T
Thickness
NO.2
0.0940
0.2080
0.0270
NO.3
0.1070
0.2390
0.0340
NO.4
0.1200
0.2530
0.0340
NO.5
0.1330
0.3000
0.0450
NO.6
0.1480
0.3140
0.0450
NO.8
0.1740
0.3750
0.0570
NO.10
0.2000
0.4340
0.0680
NO.12
0.2270
0.4970
0.0800
.25
0.2620
0.5350
0.0840
.3125
0.3260
0.6220
0.1080
.375
0.3900
0.7410
0.1230
.4375
0.4550
0.8390
0.1430
.5
0.5180
0.9390
0.1620
.5625
0.5820
1.0410
0.1820
.625
0.6500
1.1570
0.2020
.6875
0.7130
1.2580
0.2210
.75
0.7750
1.3610
0.2410
.8125
0.8430
1.4630
0.2610
.875
0.9050
1.5760
0.2850
.9375
0.9700
1.6880
0.3080
1.0420
1.7990
0.3300
1.0625
1.1070
1.9100
0.3520
1.125
1.1720
2.0190
0.3750
1.1875
1.2370
2.1240
0.3960
1.25
1.3020
2.2310
0.4170
1.3125
1.3660
2.3350
0.4380
1.375
1.4320
2.4390
0.4580
1.4375
1.4970
2.5400
0.4780
1.5
1.5610
2.6380
0.4960
Hi-Collar Helical Spring Lock Washer
T
B
A
ANSI Inch Lock

Washers
Generic part name: WHC

Notes:
BASIC_DIA
A
Inside
Dia.
B
Outside
Dia.
T
Thickness
NO.4
0.1200
0.1730
0.0220
NO.5
0.1330
0.2020
0.0300
NO.6
0.1480
0.2160
0.0300
NO.8
0.1740
0.2670
0.0470
NO.10
0.2000
0.2940
0.0470
.25
0.2620
0.3650
0.0780
.3125
0.3260
0.4600
0.0930
.375
0.3900
0.5530
0.1250
.4375
0.4550
0.6470
0.1400
.5
0.5180
0.7370
0.1720
.625
0.6500
0.9230
0.2030
.75
0.7750
1.1110
0.2180
.875
0.9050
1.2960
0.2340
1.0420
1.4830
0.2500
1.125
1.1720
1.6690
0.3130
9-5
9-6
BASIC_DIA
A
Inside
Dia.
B
Outside
Dia.
T
Thickness
1.25
1.3020
1.7990
0.3130
1.375
1.4320
2.0410
0.3750
1.5
1.5610
2.1700
0.3750
1.75
1.8110
2.6020
0.4690
2.0610
2.8520
0.4690
2.25
2.3110
3.3520
0.5080
2.5
2.5610
3.6020
0.5080
2.75
2.8110
4.1020
0.6330
3.0610
4.3520
0.6330
10
ANSI Inch Machine Screws
and Nuts
The BASIC DIA values used in callouts usually correspond to the

decimal values of the nominal diameter of the part. In some cases,
however, the callouts are numbers, such as NO.1. Those numbers
correspond to the following values of the nominal diameter:
BASIC_DIA
Nominal Diameter
NO.0000
0.0210
NO.000
0.0340
NO.00
0.0470
NO.0
0.0600
NO.1
0.0730
NO.2
0.0860
NO.3
0.0990
NO.4
0.1120
NO.5
0.1250
NO.6
0.1380
NO.8
0.1640
NO.10
0.1900
NO.12
0.2160
10 - 1
Slotted 100 Degree Flat Countersunk Head
BASIC_D
Generic part name: MSAA

Notes:
Enter the BASIC DIA. value exactly as shown.
BASIC DIA.
A
Head Dia.
J
Slot Width
T
Slot Depth
L
Lengths
NO.0000
0.043
0.008
0.008
.0625 - .5, .0625
NO.000
0.064
0.012
0.011
.0625 - .5, .0625
NO.00
0.093
0.017
0.013
.0625 - .5, .0625
NO.0
0.119
0.023
0.013
.125 - 1, .0625
NO.1
0.146
0.026
0.016
.125 - 1, .0625
NO.2
0.172
0.031
0.019
.125 - 1, .0625
NO.3
0.199
0.035
0.022
.1875 - 1.5, .0625
NO.4
0.225
0.039
0.024
.25 - 1.5, .125
NO.6
0.279
0.048
0.030
.375 - 2, .125
NO.8
0.332
0.054
0.036
.375 - 2, .125
NO.10
0.385
0.060
0.042
.375 - 2, .125
.25
0.507
0.075
0.055
.5 - 3, up to 1.5; .5 to end
.3125
0.635
0.084
0.069
.5 - 3, up to 1.5; .5 to end
.375
0.762
0.094
0.083
.5 - 3, up to 1.5; .5 to end
10 - 2
Slotted Flat Countersunk Head
BASIC_DI
Generic part name: MSBB

Notes:
ANSI Inch Machine

Screws and Nuts
BASIC DIA.
A
Head Dia.
J
Slot Width
T
Slot Depth
L
Lengths
NO.0000
0.043
0.008
0.007
.0625 - .5, .0625
NO.000
0.064
0.011
0.009
.0625 - .5, .0625
NO.00
0.093
0.017
0.014
.0625 - .5, .0625
NO.0
0.119
0.023
0.015
.125 - 1, .0625
NO.1
0.146
0.026
0.019
.125 - 1, .0625
NO.2
0.172
0.031
0.023
.125 - 1, .0625
NO.3
0.199
0.035
0.027
.1875 - 1.5, .0625
NO.4
0.225
0.039
0.030
.25 - 1.5, .125
NO.5
0.252
0.043
0.034
.25 - 1.5, .125
NO.6
0.279
0.048
0.038
.375 - 2, .125
NO.8
0.332
0.054
0.045
.375 - 2, .125
NO.10
0.385
0.060
0.053
.375 - 2, .125
NO.12
0.438
0.067
0.060
.375 - 2, .125
ANSI Inch Machine Screws and Nuts
10 - 3
BASIC DIA.
A
Head Dia.
J
Slot Width
T
Slot Depth
L
Lengths
.25
0.507
0.075
0.070
.5 - 3, .25 up to 1.5
.5 to end
.3125
0.635
0.084
0.088
.5 - 4, .25 up to 1.5
.5 to end
.375
0.762
0.094
0.106
.75 - 5, .25 up to 1.5

.5 to end
.4375
0.812
0.094
0.103
.75 - 5, .25 up to 1.5

.5 to end
.5
0.875
0.106
0.103
1 - 6, .5
.5625
1.000
0.118
0.120
1 - 7, .5
.625
1.125
0.133
0.137
1.5 - 8, .5
.75
1.375
0.149
0.171
1.5 - 9, .5
Slotted Undercut Flat Countersunk Head
BASIC_DI
Generic part name: MSDD

Notes:
10 - 4
A
Head
Dia.
H
Head
Height
J
Slot
Width
T
Slot
Depth
L
Lengths
NO.0
0.119
0.025
0.023
0.011
.125 - 1, .0625
NO.1
0.146
0.031
0.026
0.014
.125 - 1, .0625
NO.2
0.172
0.036
0.031
0.016
.125 - 1, .0625
NO.3
0.199
0.042
0.035
0.019
.1875 - 1.5, .0625
NO.4
0.225
0.047
0.039
0.022
.25 - 1.5, .125
NO.5
0.252
0.053
0.043
0.024
.25 - 1.5, .125
NO.6
0.279
0.059
0.048
0.027
.375 - 2, .125
NO.8
0.332
0.070
0.054
0.032
.375 - 2, .125
NO.10
0.385
0.081
0.060
0.037
.375 - 2, .125
NO.12
0.438
0.092
0.067
0.043
.375 - 2, .125
.25
0.507
0.107
0.075
0.050
.25 up to 1.5; .5 to end
.3125
0.635
0.134
0.084
0.062
.25 up to 1.5; .5 to end
.375
0.762
0.161
0.094
0.075
.25 up to 1.5; .5 to end
.4375
0.812
0.156
0.094
0.072
.25 up to 1.5; .5 to end
.5
0.875
0.156
0.106
0.072
1 -6, .5
ANSI Inch Machine

Screws and Nuts
BASIC
DIA.
Plain Hex Washer Head
BASIC_DI
Generic part name: MSEE

Notes:
10 - 5
BASIC DIA.
A
Flat
Width
H
Head
Height
B
Washer
Dia.
U
Washer
Thick.
L
Lengths
N0.2
0.1250
0.0440
0.1660
0.0160
.125 - 1, .0625
NO.3
0.1250
0.0550
0.1770
0.0160
.1875 - 1.5, .0625
NO.4
0.1880
0.0600
0.2430
0.0190
.25 - 1.5, .125
NO.5
0.1880
0.0700
0.2600
0.0250
.25 - 1.5, .125
NO.6
0.2500
0.0930
0.3280
0.0250
.375 - 2, .125
NO.8
0.2500
0.1100
0.3480
0.0310
.375 - 2, .125
NO.10
0.3120
0.1200
0.4140
0.0310
.375 - 2, .125
NO.12
0.3120
0.1550
0.4320
0.0390
.375 - 2, .125
.25
0.3750
0.1900
0.5200
0.0500
.5 - 3, .25 up to 1.5;
.5 to end
.3125
0.5000
0.2300
0.6760
0.0550
.625 - 4, .25 up to 1.5;

.5 to end
.375
0.5620
0.2950
0.7800
0.0630
.75 - 5, .25 up to 1.5;

.5 to end
Slotted Truss Head
BASIC_D
10 - 6
Generic part name: MSFF

Notes:
A
Head
Dia
H
Head
Height
R
Head
Radius
J
Slot
Width
T
Slot
Depth
L
Lengths
N0.0000
0.049
0.014
0.032
0.009
0.009
.0625 - .5, .0625
NO.000
0.077
0.022
0.051
0.013
0.013
.0625 - .5, .0625
NO.00
0.106
0.030
0.070
0.017
0.018
.0625 - .5, .0625
NO.0
0.131
0.037
0.087
0.023
0.022
.125 - 1, .0625
NO.1
0.164
0.045
0.107
0.026
0.027
.125 - 1, .0625
NO.2
0.194
0.053
0.129
0.031
0.031
.125 - 1, .0625
NO.3
0.226
0.061
0.151
0.035
0.036
.1875 - 1.5, .0625
NO.4
0.257
0.069
0.169
0.039
0.040
.25 - 1.5, .125
NO.5
0.289
0.078
0.191
0.043
0.045
.25 - 1.5, .125
NO.6
0.321
0.086
0.211
0.048
0.050
.375 - 2, .125
NO.8
0.384
0.102
0.254
0.054
0.058
.375 - 2, .125
NO.10
0.448
0.118
0.283
0.060
0.068
.375 - 2, .125
NO.12
0.511
0.134
0.336
0.067
0.077
.375 - 2, .125
.25
0.573
0.150
0.375
0.075
0.087
.5 - 3, .25 up to 1.5
.5 to end
.3125
0.698
0.183
0.457
0.084
0.106
.625 - 4, .25 up to 1.5

.5 to end
.375
0.823
0.215
0.538
0.094
0.124
.75 -5, .25 up to 1.5

.5 to end
4375
0.948
0.248
0.619
0.094
0.142
.75 - 5, .25 up to 1.5

.5 to end
.4375
0.948
0.248
0.619
0.094
0.142
.75 - 5, .25 up to 1.5;

.5 to end
.5
1.073
0.280
0.701
0.106
0.161
1 - 6, .5
.5625
1.198
0.312
0.783
0.118
0.179
1 - 7, .5
10 - 7
ANSI Inch Machine

Screws and Nuts
BASIC
DIA.
BASIC
DIA.
A
Head
Dia
H
Head
Height
R
Head
Radius
J
Slot
Width
T
Slot
Depth
L
Lengths
.625
1.323
0.345
0.863
0.133
0.196
1.5 - 8, .5
.75
1.573
0.410
1.024
0.149
0.234
1.5 -9, .5
Plain Regular Hex Head
BASIC_DI
Generic part name: MSGG

Notes:
10 - 8
BASIC_
DIA.
A
Flat Width
H
Head
Height
L
Lengths
NO.1
0.1250
0.0440
.125 - 1, .0625
NO.2
0.1250
0.0500
.125 - 1, .0625
NO.3
0.1880
0.0550
.1875 - 1.5, .0625
NO.4
0.1880
0.0600
.25 - 1.5, .125
NO.5
0.1880
0.0700
.25 - 1.5, .125
NO.6
0.2500
0.0930
.375 - 2, .125
NO.8
0.2500
0.1100
.375 - 2, .125
NO.10
0.3120
0.1200
.375 - 2, .125
BASIC_
DIA.
A
Flat Width
H
Head
Height
L
Lengths
NO.12
0.3120
0.1550
.375 - 2, .125
.25
0.3750
0.1900
.5 - 3, .25 up to 1.5; .5 to end
.3125
0.5000
0.2300
.625 - 4, .25 up to 1.5; .5 to end
.375
0.5620
0.2950
.75 - 5, .25 up to 1.5; .5 to end
Slotted Pan Head
ANSI Inch Machine

Screws and Nuts
BASIC_DIA
Generic part name: MSHH

Notes:
BASIC
DIA.
A
Head
Dia.
H
Head
Height
R
Head
Radius
J
Slot
Width
T
Slot
Depth
L
Lengths
NO.0000
0.042
0.016
0.007
0.008
0.008
.0625 - .5, .0625
NO.000
0.066
0.023
0.010
0.012
0.012
.0625 - .5, .0625
NO.00
0.090
0.032
0.015
0.017
0.016
.0625 - .5, .0625
NO.0
0.116
0.039
0.020
0.023
0.022
.125 - 1, .0625
10 - 9
BASIC
DIA.
A
Head
Dia.
H
Head
Height
R
Head
Radius
J
Slot
Width
T
Slot
Depth
L
Lengths
NO.1
0.142
0.046
0.025
0.026
0.027
.125 - 1, .0625
NO.2
0.167
0.053
0.035
0.031
0.031
.125 - 1, .0625
NO.3
0.193
0.060
0.037
0.035
0.036
.1875 - 1.5, .0625
NO.4
0.219
0.068
0.042
0.039
0.040
.25 - 1.5, .125
NO.5
0.245
0.075
0.044
0.043
0.045
.25 - 1.5, .125
NO.6
0.270
0.082
0.046
0.048
0.050
.375 - 2, .125
NO.8
0.322
0.096
0.052
0.054
0.058
.375 - 2, .125
NO.10
0.373
0.110
0.061
0.060
0.068
.375 - 2, .125
NO.12
0.425
0.125
0.078
0.067
0.077
.375 - 2, .125
.25
0.492
0.144
0.087
0.075
0.087
.5 - 3, .25 up to 1.5
.5 to end
.3125
0.615
0.178
0.099
0.084
0.106
.5 - 4, .25 up to 1.5
.5 to end
.375
0.740
0.212
0.143
0.094
0.124
.75 - 5, .25 up to 1.5

.5 to end
.4375
0.863
0.247
0.153
0.094
0.142
.75 - 5, .25 up to 1.5

.5 to end
.5
0.987
0.281
0.175
0.106
0.161
1 - 6, .5
.5635
1.041
0.315
0.197
0.118
0.179
1 - 7, .5
.625
1.172
0.350
0.219
0.133
0.197
1.5 - 8, .5
.75
1.435
0.419
0.263
0.149
0.234
1.5 - 9, .5
10 - 10
Slotted Fillister Head
BASIC_DI
Generic part name: MSII

Notes:
ANSI Inch Machine

Screws and Nuts
BASIC
DIA.
A
Head
Dia.
H
Head
Side
Hgt.
O
Total
Head
Hgt.
J
Slot
Width
T
Slot
Depth
L
Lengths
NO.0000
0.038
0.019
0.025
0.008
0.012
.0625 - .5, .0625
NO.000
0.059
0.029
0.035
0.012
0.017
.0625 - .5, .0625
NO.00
0.082
0.037
0.047
0.017
0.022
.0625 - .5, .0625
NO.0
0.096
0.043
0.055
0.023
0.025
.125 - 1, .0625
NO.1
0.118
0.053
0.066
0.026
0.031
.125 - 1, .0625
NO.2
0.140
0.062
0.083
0.031
0.037
.125 - 1, .0625
NO.3
0.161
0.070
0.095
0.035
0.043
.1875 - 1.5, .0625
NO.4
0.183
0.079
0.107
0.039
0.048
.25 - 1.5, .125
NO.5
0.205
0.088
0.120
0.043
0.054
.25 - 1.5, .125
NO.6
0.226
0.096
0.132
0.048
0.060
.375 - 2, .125
NO.8
0.270
0.113
0.156
0.540
0.071
.375 - 2, .125
NO.10
0.313
0.130
0.180
0.060
0.083
.375 - 2, .125
10 - 11
BASIC
DIA.
A
Head
Dia.
H
Head
Side
Hgt.
O
Total
Head
Hgt.
J
Slot
Width
T
Slot
Depth
L
Lengths
NO.12
0.357
0.148
0.205
0.067
0.094
.375 - 2, .125
.25
0.414
0.170
0.237
0.075
0.109
.5 - 3, .25 up to 1.5
.5 to end
.3125
0.518
0.211
0.295
0.084
0.137
.625 - 4, .25 up to 1.5

.5 to end
.375
0.622
0.253
0.355
0.094
0.164
.75 - 5, .25 up to 1.5

.5 to end
.4375
0.625
0.265
0.368
0.094
0.170
.75 - 5, .25 up to 1.5

.5 to end
.5
0.750
0.297
0.412
0.106
0.190
1 - 6, .5
.5625
0.812
0.336
0.466
0.118
0.214
1 - 7, .5
.625
0.875
0.375
0.521
0.133
0.240
1.5 - 8, .5
.75
1.000
0.441
0.612
0.149
0.281
1.5 - 9, .5
Slotted Drilled Fillister Head
BASIC_DIA
Generic part name: MSJJ

Notes:
10 - 12
A
Head
Dia.
H
Head
Side
Hgt.
O
Total
Head
Hgt.
J
Slot
Width
T
Slot
Depth
E
Hole
Loc.
F
Hole
Dia.
L
Lengths
NO.2
0.140
0.062
0.083
0.031
0.030
0.026
0.031
.125 -1,
.0625
NO.3
0.161
0.070
0.095
0.035
0.034
0.030
0.037
.1875 1.5,
.0625
NO.4
0.183
0.079
0.107
0.039
0.038
0.035
0.037
.25 - 1.5,
.125
NO.5
0.205
0.088
0.120
0.043
0.042
0.038
0.046
.25 - 1.5,
.125
NO.6
0.226
0.096
0.132
0.048
0.045
0.043
0.046
.375 - 2,
.125
NO.8
0.270
0.113
0.156
0.054
0.065
0.043
0.046
.375 - 2,
.125
NO.10
0.313
0.130
0.180
0.060
0.075
0.043
0.046
.375 - 2,
.125
NO.12
0.357
0.148
0.205
0.067
0.087
0.053
0.046
.375 - 2,
.125
.25
0.414
0.170
0.237
0.075
0.102
0.062
0.062
.5 - 3,
.25 up to
1.5;
.5 to end
.3125
0.518
0.211
0.295
0.084
0.130
0.078
0.070
.625 - 4,
.25 up to
1.5;
.5 to end
.375
0.622
0.253
0.355
0.094
0.154
0.094
0.070
.75 - 5,
.25 up to
1.5;
.5 to end
10 - 13
ANSI Inch Machine

Screws and Nuts
BASIC
DIA.
Slotted Oval Countersunk Head
Generic part name: MSKK

Notes:
BASIC
DIA.
A
Head
Dia.
H
Head
Height
J
Slot
Width
T
Slot
Depth
L
Lengths
NO.00
0.093
0.042
0.017
0.023
.0625 - .5, .0625
NO.0
0.119
0.056
0.023
0.030
.125 - 1, .0625
NO.1
0.146
0.068
0.026
0.038
.125 - 1, .0625
N0.2
0.172
0.080
0.031
0.045
.125 - 1, .0625
NO.3
0.199
0.092
0.035
0.052
.1875 - 1.5, .0625
NO.4
0.225
0.104
0.039
0.059
.25 - 1.5, .125
NO.5
0.252
0.116
0.043
0.067
.25 - 1.5, .125
NO.6
0.279
0.128
0.048
0.074
.375 - 2, .125
NO.8
0.332
0.152
0.054
0.088
.375 - 2, .125
NO.10
0.385
0.176
0.060
0.103
.375 - 2, .125
NO.12
0.438
0.200
0.067
0.117
.375 - 2, .125
10 - 14
BASIC
DIA.
A
Head
Dia.
H
Head
Height
J
Slot
Width
T
Slot
Depth
L
Lengths
.25
0.507
0.232
0.075
0.136
.5 - 3, .25 up to 1.5
.5 to end
.3125
0.635
0.290
0.084
0.171
.5 - 4, .25 up to 1.5
.5 to end
.375
0.762
0.347
0.094
0.206
.75 - 5, .25 up to 1.5

.5 to end
.4375
0.812
0.345
0.094
0.210
.75 - 5, .25 up to 1.5

.5 to end
.5
0.875
0.354
0.106
0.216
1 - 6, .5
.5625
1.000
0.410
0.118
0.250
1 - 7, .5
.625
1.125
0.467
0.133
0.285
1.5 - 8, .5
.75
1.375
0.578
0.149
0.353
1.5 - 9, .5
ANSI Inch Machine
Screws and Nuts
Slotted Binding Head
BASIC_DIA
Generic part name: MSLL

Notes:
10 - 15
BASIC
DIA.
A
Head
Dia.
O
Total
Head
Hgt.
F
Head
Oval
Hgt.
J
Slot
Width
T
Slot
Depth
L
Lengths
NO.0000
0.046
0.014
0.006
0.008
0.009
.0625 - .5, .0625
NO.000
0.073
0.021
0.008
0.012
0.013
.0625 - .5, .0625
NO.00
0.098
0.028
0.011
0.017
0.018
.0625 - .5, .0625
NO.0
0.126
0.032
0.012
0.023
0.018
.125 - 1, .0625
NO.1
0.153
0.041
0.015
0.026
0.024
.125 - 1, .0625
NO.2
0.181
0.050
0.018
0.031
0.030
.125 - 1, .0625
NO.3
0.208
0.059
0.022
0.035
0.036
.1875 - 1.5, .0625
NO.4
0.235
0.068
0.025
0.039
0.042
.25 - 1.5, .125
NO.5
0.263
0.078
0.029
0.043
0.048
.25 - 1.5, .125
NO.6
0.290
0.087
0.032
0.048
0.053
.375 - 2, .125
NO.8
0.344
0.105
0.039
0.054
0.065
.375 - 2, .125
NO.10
0.399
0.123
0.045
0.060
0.077
.375 - 2, .125
NO.12
0.454
0.141
0.052
0.067
0.089
.375 - 2, .125
.25
0.525
0.165
0.061
0.075
0.105
.5 - 3, .25 up to 1.5
.5 to end
.3125
0.656
0.209
0.077
0.084
0.134
.5 - 4, .25 up to 1.5
.5 to end
.375
0.788
0.253
0.094
0.094
0.163
.75 - 5, .25 up to 1.5

.5 to end
10 - 16
Slotted Undercut Oval Countersunk Head
Generic part name: MSMM

Notes:
BASIC
DIA.
A
Head
Dia.
H
Head
Side
Hgt.
O
Total
Head
Hgt
J
Slot
Width
T
Slot
Depth
L Lengths
NO.0
0.1190
0.0250
0.0460
0.0230
0.0280
.125 - 1, .0625
NO.1
0.1460
0.0310
0.0560
0.0260
0.0340
.125 - 1, .0625
NO.2
0.1720
0.0360
0.0650
0.0310
0.0400
.125 - 1, .0625
NO.3
0.1990
0.0420
0.0750
0.0350
0.0470
.1875 - 1.5, .0625
NO.4
0.2250
0.0470
0.0840
0.0390
0.0530
.25 - 1.5, .125
NO.5
0.2520
0.0530
0.0940
0.0430
0.0590
.25 - 1.5, .125
NO.6
0.2790
0.0590
0.1040
0.0480
0.0650
.375 - 2, .125
NO.8
0.3320
0.0700
0.1230
0.0540
0.0780
.375 - 2, .125
NO.10
0.3850
0.0810
0.1420
0.0600
0.0900
.375 - 2, .125
NO.12
0.4380
0.0920
0.1610
0.0670
0.1030
.375 - 2, .125
.25
0.5070
0.1070
0.1860
0.0750
0.1190
.5 - 3, .25 up to 1.5
.5 to end
10 - 17
ANSI Inch Machine

Screws and Nuts
BASIC
DIA.
A
Head
Dia.
H
Head
Side
Hgt.
O
Total
Head
Hgt
J
Slot
Width
T
Slot
Depth
L Lengths
.3125
0.6350
0.1340
0.2320
0.0840
0.1490
.5 - 4, .25 up to 1.5,
.5 to end
.375
0.7620
0.1610
0.2780
0.0940
0.1790
.75 - 5, .25 up to 1.5

.5 to end
.4375
0.8120
0.1560
0.2790
0.0940
0.1840
.75 - 5, .25 up to 1.5

.5 to end
.5
0.8750
0.1560
0.2880
0.1060
0.2040
1 - 6, .5
Type I Cross Recessed 100 Degree

Countersunk
BASIC_DIA
Generic part name: MSAX

Notes:
10 - 18
BASIC
DIA.
A
Head
Dia.
M
Recess
Dia.
N
Recess
Width
L
Lengths
NO.0
0.119
0.061
0.012
.125 - 1, .0625
NO.1
0.146
0.069
0.014
.125 - 1, .0625
BASIC
DIA.
A
Head
Dia.
M
Recess
Dia.
N
Recess
Width
L
Lengths
NO.2
0.172
0.095
0.012
.125 - 1, .0625
NO.3
0.199
0.102
0.014
.1875 - 1.5, .0625
NO.4
0.225
0.117
0.018
.25 - 1.5, .125
NO.6
0.279
0.154
0.027
.375 - 2, .125
NO.8
0.332
0.169
0.028
.375 - 2, .125
NO.10
0.385
0.184
0.030
.375 - 2, .125
.25
0.507
0.247
0.033
.5 - 3, .25 up to 1.5; .5 to end
.3125
0.635
0.317
0.053
.5 - 4, .25 up to 1.5; .5 to end
.375
0.762
0.342
0.056
.75 - 5, .25 up to 1.5; .5 to end
ANSI Inch Machine

Screws and Nuts
Type I Cross Recessed Flat Countersunk

Head
BASIC_DIA
Generic part name: MSBX

Notes:
10 - 19
10 - 20
BASIC
DIA.
A
Head
Dia.
M
Recess
Dia.
N
Recess
Width
L
Lengths
NO.0
0.119
0.069
0.014
.125 - 1, .0625
NO.1
0.146
0.077
0.015
.125 - 1, .0625
NO.2
0.172
0.102
0.017
.125 - 1, .0625
NO.3
0.199
0.107
0.018
.1875 - 1.5, .0625
NO.4
0.225
0.128
0.018
.25 - 1.5, .125
NO.5
0.252
0.154
0.027
.25 - 1.5, .125
NO.6
0.279
0.174
0.029
.375 - 2, .125
NO.8
0.332
0.189
0.030
.375 - 2, .125
NO.10
0.385
0.204
0.032
.375 - 2, .125
NO.12
0.438
0.268
0.035
.375 -2, .125
.25
0.507
0.283
0.036
.5 - 3, .25 up to 1.5; .5 to end
.3125
0.635
0.365
0.061
.625 - 4, .25 up to 1.5; .5 to end
.375
0.762
0.393
0.065
.75 - 5, .25 up to 1.5; .5 to end
.4375
0.812
0.409
0.068
.75 - 5, .25 up to 1.5; .5 to end
.5
0.875
0.424
0.069
1 - 6, .5
.5625
1.000
0.454
0.073
1 - 7, .5
.625
1.125
0.576
0.079
1.5 - 8, .5
.75
1.375
0.640
0.087
1.5 - 9, .5
Type I Cross Recessed Undercut Flat

Countersunk
Generic part name: MSDX

ANSI Inch Machine
Screws and Nuts
Notes:
BASIC
DIA.
A
Head
Dia.
H
Head
Height
M
Recess
Dia
N
Recess
Width
L
Lengths
NO.0
0.119
0.025
0.069
0.014
.125 - 1, .0625
NO.1
0.146
0.031
0.077
0.015
.125 - 1, .0625
NO.2
0.172
0.036
0.095
0.017
.125 - 1, .0625
NO.3
0.199
0.042
0.102
0.018
.1875 - 1.5, .0625
NO.4
0.225
0.047
0.117
0.018
.25 - 1.5, .125
NO.5
0.252
0.053
0.128
0.018
.25 - .1.5, .125
NO.6
0.279
0.059
0.146
0.025
.375 - 2, .125
NO.8
0.332
0.070
0.174
0.029
.375 - 2, .125
NO.10
0.385
0.081
0.189
0.030
.375 - 2, .125
NO.12
0.438
0.092
0.233
0.030
.375 - 2, .125
.25
0.507
0.107
0.250
0.032
.5 - 3, .25 up to 1.5
.5 to end
10 - 21
BASIC
DIA.
A
Head
Dia.
H
Head
Height
M
Recess
Dia
N
Recess
Width
L
Lengths
.3125
0.635
0.134
0.317
0.053
.625 - 4, .25 up to 1.5

.5 to end
.375
0.762
0.161
0.365
0.061
.75 - 5, .25 up to 1.5

.5 to end
.4375
0.812
0.156
0.393
0.065
.75 - 5, .25 up to 1.5

.5 to end
.5
0.875
0.156
0.409
0.068
1 - 6, .5
Type I Cross Recessed Truss Head
BASIC_DI
Generic part name: MSFX

Notes:
BASIC
DIA.
A
Head
Dia.
H
Head
Height
R
Head
Radius
M
Recess
Dia.
N
Recess
Width
L
Lengths
NO.0
0.131
0.037
0.087
0.063
0.013
.125 - 1, .0625
NO.1
0.164
0.045
0.107
0.071
0.014
.125 - 1, .0625
NO.2
0.194
0.053
0.129
0.104
0.018
.125 - 1, .0625
NO.3
0.226
0.061
0.151
0.110
0.018
.1875 - 1.5, .0625
10 - 22
A
Head
Dia.
H
Head
Height
R
Head
Radius
M
Recess
Dia.
N
Recess
Width
L
Lengths
NO.4
0.257
0.069
0.169
0.112
0.018
.25 - 1.5, .125
NO.5
0.289
0.078
0.191
0.128
0.019
.25 - 1.5, .125
NO.6
0.321
0.086
0.211
0.158
0.027
.375 - 2, .125
NO.8
0.384
0.102
0.254
0.173
0.029
.375 - 2, .125
NO.10
0.448
0.118
0.283
0.188
0.030
.375 - 2, .125
NO.12
0.511
0.134
0.336
0.248
0.032
.375 - 2, .125
.25
0.573
0.150
0.375
0.263
0.033
.5 - 3, .25 up to 1.5
.5 to end
.3125
0.698
0.183
0.457
0.352
0.059
.625 - 4, .25 up to 1.5

.5 to end
.375
0.823
0.215
0.538
0.383
0.063
.75 - 5, .25 up to 1.5

.5 to end
.4375
0.948
0.248
0.619
0.414
0.068
.75 - 5, .25 up to 1.5

.5 to end
.5
1.073
0.280
0.701
0.444
0.072
1 - 6, .5
.5625
1.198
0.312
0.783
0.451
0.074
1 - 7, .5
.625
1.323
0.345
0.863
0.559
0.077
1.5 - 8, .5
.75
1.573
0.410
1.024
0.620
0.085
1.5 - 9, .5
Type I Cross Recessed Pan Head
BASIC_D
Generic part name: MSHX

Notes:
10 - 23
ANSI Inch Machine

Screws and Nuts
BASIC
DIA.
BASIC
DIA.
A
Head
Dia.
H
Head
Height
R
Head
Radius
M
Recess
Dia.
N
Recess
Width
L Lengths
NO.0
0.116
0.039
0.020
0.067
0.013
.125 - 1, .0625
NO.1
0.142
0.046
0.025
0.074
0.014
.125 - 1, .0625
NO.2
0.167
0.053
0.035
0.104
0.017
.125 - 1, .0625
NO.3
0.193
0.060
0.037
0.112
0.019
.1875 - 1.5, .0625
NO.4
0.219
0.068
0.042
0.122
0.019
.25 - 1.5, .125
NO.5
0.245
0.075
0.044
0.158
0.028
.25 - 1.5, .125
NO.6
0.270
0.082
0.046
0.166
0.028
.375 - 2, .125
NO.8
0.322
0.096
0.052
0.182
0.030
.375 - 2, .125
NO.10
0.373
0.110
0.061
0.199
0.031
.375 - 2, .125
NO.12
0.425
0.125
0.078
0.259
0.034
.375 - 2, .125
.25
0.492
0.144
0.087
0.281
0.036
.5 - 3, .25 up to 1.5
.5 to end
.3125
0.615
0.178
0.099
0.350
0.059
.625 - 4, .25 up to 1.5

.5 to end
.375
0.740
0.212
0.143
0.389
0.065
.75 - 5, .25 up to 1.5

.5 to end
.4375
0.863
0.247
0.153
0.413
0.068
.75 - 5, .25 up to 1.5

.5 to end
.5
0.987
0.281
0.175
0.435
0.071
1 - 6, .5
.5625
1.041
0.315
0.197
0.470
0.076
1 - 7, .5
.625
1.172
0.350
0.219
0.587
0.081
1.5 - 8, .5
.75
1.435
0.419
0.263
0.633
0.086
1.5 - 9, .5
10 - 24
Type I Cross Recessed Fillister Head
BASIC_DI
Generic part name: MSIX

Notes:
ANSI Inch Machine

Screws and Nuts
BASIC
DIA.
A
Head
Dia.
H
Head
Side
Hgt.
O
Total
Head
Hgt
M
Recess
Dia.
N
Recess
Width
L
Lengths
NO.0
0.096
0.043
0.055
0.067
0.013
.125 - 1, .0625
NO.1
0.118
0.053
0.066
0.074
0.014
.125 - 1, .0625
NO.2
0.140
0.062
0.083
0.104
0.017
.125 - 1, .0625
NO.3
0.161
0.070
0.095
0.112
0.019
.1875 -1.5, .0625
NO.4
0.183
0.079
0.107
0.122
0.019
.25 - 1.5, .125
NO.5
0.205
0.088
0.120
0.143
0.027
.25 - 1.5, .125
NO.6
0.226
0.096
0.132
0.166
0.028
.375 - 2, .125
NO.8
0.270
0.113
0.156
0.182
0.030
.375 - 2, .125
NO.10
0.313
0.130
0.180
0.199
0.031
.375 - 2, .125
NO.12
0.357
0.148
0.205
0.259
0.034
.375 - 2, .125
.25
0.414
0.170
0.237
0.281
0.036
.5 - 3, .25 up to 1.5
.5 to end
10 - 25
BASIC
DIA.
A
Head
Dia.
H
Head
Side
Hgt.
O
Total
Head
Hgt
M
Recess
Dia.
N
Recess
Width
L
Lengths
.3125
0.518
0.211
0.295
0.322
0.042
.5 - 4, .25 up to 1.5
.5 to end
.375
0.622
0.253
0.355
0.389
0.065
.75 - 5, .25 up to 1.5

.5 to end
.4375
0.625
0.265
0.368
0.413
0.068
.75 - 5, .25 up to 1.5

.5 to end
.5
0.750
0.297
0.412
0.435
0.071
1 - 6, .5
.5625
0.812
0.336
0.466
0.470
0.076
1 - 7, .5
.625
0.875
0.375
0.521
0.587
0.081
1.5 - 8, .5
.75
1.000
0.441
0.612
0.633
0.086
1.5 - 9, .5
Type I Cross Recessed Oval Countersunk
BASIC_DI
Generic part name: MSKX

Notes:
10 - 26
A
Head
Dia.
H
Head
Height
M
Recess
Dia.
N
Recess
Width
L Lengths
NO.0
0.119
0.056
0.074
0.014
.125 - 1, .0625
NO.1
0.146
0.068
0.077
0.015
.125 - 1, .0625
NO.2
0.172
0.080
0.112
0.018
.125 - 1, .0625
NO.3
0.199
0.092
0.124
0.019
.1875 - 1.5, .0625
NO.4
0.225
0.104
0.136
0.019
.25 - 1.5, .125
NO.5
0.252
0.116
0.158
0.028
.25 - 1.5, .125
NO.6
0.279
0.128
0.178
0.030
.375 - 2, .125
NO.8
0.332
0.152
0.192
0.031
.375 - 2, .125
NO.10
0.385
0.176
0.209
0.033
.375 - 2, .125
NO.12
0.438
0.200
0.270
0.038
.375 - 2, .125
.25
0.507
0.232
0.290
0.040
.5 - 3, .25 up to 1.5
.5 to end
.3125
0.635
0.290
0.390
0.065
.625 - 4, .25 up to 1.5

.5 to end
.375
0.762
0.347
0.410
0.068
.75 - 5, .25 up to 1.5

.5 to end
.4375
0.812
0.345
0.422
0.070
.75 - 5, .25 up to 1.5

.5 to end
.5
0.875
0.354
0.437
0.071
1 - 6, .5
.5625
1.000
0.410
0.473
0.075
1 - 7, .5
.625
1.125
0.467
0.591
0.081
1.5 - 8, .5
.75
1.375
0.578
0.653
0.088
1.5 - 9, .5
10 - 27
ANSI Inch Machine

Screws and Nuts
BASIC
DIA.
Type I Cross Recessed Binding Head
BASIC_DI
Generic part name: MSLX

Notes:
BASIC
A
Head
Dia.
O
Total
Head
Hgt.
F
Oval
Head
Hgt.
M
Recess
Dia.
N
Recess
Width
L Lengths
NO.0
0.126
0.032
0.012
0.067
0.013
.125 - 1, .0625
NO.1
0.153
0.041
0.015
0.074
0.014
.125 - 1, .0625
NO.2
0.181
0.050
0.018
0.100
0.017
.125 - 1, .0625
NO.3
0.208
0.059
0.022
0.110
0.017
.1875 - 1.5, .0625
NO.4
0.235
0.068
0.025
0.118
0.017
.25 - 1.5, .125
NO.5
0.263
0.078
0.029
0.148
0.025
.25 - 1.5, .125
NO.6
0.290
0.087
0.032
0.160
0.026
.375 - 2, .125
NO.8
0.344
0.105
0.039
0.186
0.028
.375 - 2, .125
NO.10
0.399
0.123
0.045
0.205
0.029
.375 - 2, .125
NO.12
0.454
0.141
0.052
0.267
0.032
.375 - 2, .125
.25
0.525
0.165
0.061
0.281
0.046
.5 - 3, .25 up to 1.5
.5 to end
10 - 28
BASIC
A
Head
Dia.
O
Total
Head
Hgt.
F
Oval
Head
Hgt.
M
Recess
Dia.
N
Recess
Width
L Lengths
.3125
0.656
0.209
0.077
0.350
0.068
.5 - 4, .25 up to 1.5
.5 to end
.375
0.788
0.253
0.094
0.400
0.076
.75 - 5, .25 up to
1.5
.5 to end
Type I Cross Recessed Undercut Oval

Countersunk
Generic part name: MSMX

Notes:
10 - 29
ANSI Inch Machine

Screws and Nuts
BASIC_DIA
BASIC
DIA.
A
Head
Dia.
H
Head
Side
Hgt.
O
Total
Head
Hgt.
M
Recess
Dia.
N
Recess
Width
L Lengths
NO.0
0.1190
0.0250
0.0460
0.074
0.014
.125 - 1, .0625
NO.1
0.1460
0.0310
0.0560
0.077
0.015
.125 - 1, .0625
NO.2
0.1720
0.0360
0.0650
0.112
0.018
.125 - 1, .0625
NO.3
0.1990
0.0420
0.0750
0.124
0.019
.1875 - 1.5, .0625
NO.4
0.2250
0.0470
0.0840
0.136
0.019
.25 - 1.5, .125
NO.5
0.2520
0.0530
0.0940
0.158
0.028
.25 - 1.5, .125
NO.6
0.2790
0.0590
0.1040
0.178
0.030
.375 - 2, .125
NO.8
0.3320
0.0700
0.1230
0.192
0.031
.375 - 2, .125
NO.10
0.3850
0.0810
0.1420
0.209
0.033
.375 - 2, .125
NO.12
0.4380
0.0920
0.1610
0.270
0.038
.375 - 2, .125
.25
0.5070
0.1070
0.1860
0.290
0.040
.5 - 3, .25 up to 1.5
.5 to end
.3125
0.6350
0.1340
0.2320
0.381
0.064
.625 - 4, .25 up to 1.5

.5 to end
.375
0.7620
0.1610
0.2780
0.400
0.066
.75 - 5, .25 up to 1.5

.5 to end
.4375
0.8120
0.1560
0.2790
0.410
0.068
.75 - 5, .25 up to 1.5

.5 to end
.5
0.8750
0.1560
0.2880
0.422
0.070
1 - 6, .5
Hex Machine Screw Nut

H
BASIC_
10 - 30
Generic part name: HMSN

Notes:
Double Chamfer
Flat Bottom
F
Flat
Width
H
Height
BASIC
DIA.
F
Flat
Width
H
Height
NO.0
0.1560
0.0500
NO.0
0.1560
0.0500
NO.1
0.1560
0.0500
NO.1
0.1560
0.0500
NO.2
0.1880
0.0660
NO.2
0.1880
0.0660
NO.3
0.1880
0.0660
NO.3
0.1880
0.0660
NO.4
0.2500
0.0980
NO.4
0.2500
0.0980
NO.5
0.3120
0.1140
NO.5
0.3120
0.1140
NO.6
0.3120
0.1140
NO.6
0.3120
0.1140
NO.8
0.3440
0.1300
NO.8
0.3440
0.1300
NO.10
0.3750
0.1300
NO.10
0.3750
0.1300
NO.12
0.4380
0.1610
NO.12
0.4380
0.1610
.25
0.4380
0.1930
.25
0.4380
0.1930
.3125
0.5620
0.2250
.3125
0.5620
0.2250
.375
0.6250
0.2570
.375
0.6250
0.2570
Square Machine Screw Nut

BASIC_DI
10 - 31
ANSI Inch Machine

Screws and Nuts
BASIC
DIA.
Generic part name: SQMSN

Notes:
10 - 32
BASIC DIA.
F
Flat Width
H
Height
NO.0
0.1562
0.0500
NO.1
0.1562
0.0500
NO.2
0.1880
0.0660
NO.3
0.1880
0.0660
NO.4
0.2500
0.0980
NO.5
0.3120
0.1140
NO.6
0.3120
0.1140
NO.8
0.3440
0.1300
NO.10
0.3750
0.1300
NO.12
0.4380
0.1610
.25
0.4380
0.1930
.3125
0.5620
0.2250
.375
0.6250
0.2570
11
ANSI Inch Plain Washers
11 - 1
Plain Washer (Preferred Sizes)

B
C
Generic part name: WA

Notes:
NOM_SIZE
11 - 2
Corresponds to ANSI18.22.1-1965 (R1975).
Enter the NOM_SIZE and SERIES values exactly as

shown.
SERIES
A
Inside Dia
B
Outside Dia
C
Thickness
---
0.0780
0.1880
0.0200
---
0.0940
0.2500
0.0200
---
0.1250
0.3120
0.0320
NO.6
0.1560
0.3750
0.0490
NO.8
0.1880
0.4380
0.0490
NO.10
0.2190
0.5000
0.0490
.1875
0.2500
0.5620
0.0490
NO.12
0.2500
0.5620
0.0650
.25
NARROW
0.2810
0.6250
0.0650
.25
WIDE
0.3120
0.7340
0.0650
.3125
NARROW
0.3440
0.6880
0.0650
.3125
WIDE
0.3750
0.8750
0.0830
.375
NARROW
0.4060
0.8120
0.0650
SERIES
A
Inside Dia
B
Outside Dia
C
Thickness
.375
WIDE
0.4380
1.0000
0.0830
.4375
NARROW
0.4690
0.9220
0.0650
.4375
WIDE
0.5000
1.2500
0.0830
.5
NARROW
0.5310
1.0620
0.0950
.5
WIDE
0.5620
1.3750
0.1090
.5625
NARROW
0.5940
1.1560
0.0950
.5625
WIDE
0.6250
1.4690
0.1090
.625
NARROW
0.6560
1.3120
0.9500
.625
WIDE
0.6880
1.7500
0.1340
.75
NARROW
0.8120
1.4690
0.1340
.75
WIDE
0.8120
2.0000
0.1480
.875
NARROW
0.9380
1.7500
0.1340
.875
WIDE
0.9380
2.2500
0.1650
NARROW
1.0620
2.0000
0.1340
WIDE
1.0620
2.5000
0.1650
1.125
NARROW
1.2500
2.2500
0.1340
1.125
WIDE
1.2500
2.7500
0.1650
1.25
NARROW
1.3750
2.5000
0.1650
1.25
WIDE
1.3750
3.0000
0.1650
1.375
NARROW
1.5000
2.7500
0.1650
1.375
WIDE
1.5000
3.2500
0.1800
1.5
NARROW
1.6250
3.0000
0.1650
1.5
WIDE
1.6250
3.5000
0.1800
1.625
1.7500
3.7500
0.1800
1.75
1.8750
4.0000
0.1800
1.875
2.0000
4.2500
0.1800
2.1250
4.5000
0.1800
2.25
2.3750
4.7500
0.2200
2.5
2.6250
5.0000
0.2380
2.75
2.8750
5.2500
0.2590
3.1250
5.5000
0.2840
ANSI Inch Plain

Washers
NOM_SIZE
11 - 3
Type B Plain Washer

B
C
Generic part name: WB

Notes:
Enter the NOM_SIZE and SERIES values exactly as

shown.
NOM_SIZE
SERIES
A
Inside Dia
B
Outside Dia
C
Thickness
NO.0
NARROW
0.0680
0.1250
0.0250
NO.0
REGULAR
0.0680
0.1880
0.0250
NO.0
WIDE
0.0680
0.2500
0.0250
NO.1
NARROW
0.0840
0.1560
0.0250
NO.1
REGULAR
0.0840
0.2190
0.0250
NO.1
WIDE
0.0840
0.2810
0.0320
NO.2
NARROW
0.0940
0.1880
0.0250
NO.2
REGULAR
0.0940
0.2500
0.0320
NO.2
WIDE
0.0940
0.3440
0.0320
NO.3
NARROW
0.1090
0.2190
0.0250
NO.3
REGULAR
0.1090
0.3120
0.0320
NO.3
WIDE
0.1090
0.4060
0.0400
11 - 4
SERIES
A
Inside Dia
B
Outside Dia
C
Thickness
NO.4
NARROW
0.1250
0.2500
0.0320
NO.4
REGULAR
0.1250
0.3750
0.0400
NO.5
NARROW
0.1410
0.2810
0.0320
NO.5
REGULAR
0.1410
0.4060
0.0400
NO.5
WIDE
0.1410
0.5000
0.0400
NO.6
NARROW
0.1560
0.3120
0.0320
NO.6
REGULAR
0.1560
0.4380
0.0400
NO.6
WIDE
0.1560
0.5620
0.0400
NO.8
NARROW
0.1880
0.3750
0.0400
NO.8
REGULAR
0.1880
0.5000
0.0400
NO.8
WIDE
0.1880
0.6250
0.0630
N0.10
NARROW
0.2030
0.4060
0.0400
NO.10
REGULAR
0.2030
0.5620
0.0400
NO.10
WIDE
0.2030
0.7340
0.0630
NO.12
NARROW
0.2340
0.4380
0.0400
NO.12
REGULAR
0.2340
0.6250
0.0630
NO.12
WIDE
0.2340
0.8750
0.0630
.25
NARROW
0.2810
0.5000
0.0630
.25
REGULAR
0.2810
0.7340
0.0630
.25
WIDE
0.2810
1.0000
0.0630
.3125
NARROW
0.3440
0.6250
0.0630
.3125
REGULAR
0.3440
0.8750
0.0630
.3125
WIDE
0.3440
1.1250
0.0630
.375
NARROW
0.4060
0.7340
0.0630
.375
REGULAR
0.4060
1.0000
0.0630
.375
WIDE
0.4060
1.2500
0.1000
.4375
NARROW
0.4690
0.8750
0.0630
.4375
REGULAR
0.4690
1.1250
0.0630
.4375
WIDE
0.4690
1.4690
0.1000
.5
NARROW
0.5310
1.0000
0.0630
.5
REGULAR
0.5310
1.2500
0.1000
ANSI Inch Plain

Washers
NOM_SIZE
11 - 5
NOM_SIZE
SERIES
A
Inside Dia
B
Outside Dia
C
Thickness
.5
WIDE
0.5310
1.7500
0.1000
.5625
NARROW
0.5940
1.1250
0.0630
.625
NARROW
0.6560
1.2500
0.1000
.625
REGULAR
0.6560
1.7500
0.1000
.625
WIDE
0.6560
2.2500
0.1600
.75
NARROW
0.8120
1.3750
0.1000
.75
REGULAR
0.8120
2.0000
0.1000
.75
WIDE
0.8120
2.5000
0.1600
.875
NARROW
0.9380
1.4690
0.1000
.875
REGULAR
0.9380
2.2500
0.1600
.875
WIDE
0.9380
2.7500
0.1600
NARROW
1.0620
1.7500
0.1000
REGULAR
1.0620
2.5000
0.1600
WIDE
1.0620
3.0000
0.1600
1.125
NARROW
1.1880
2.0000
0.1000
1.125
REGULAR
1.1880
2.7500
0.1600
1.125
WIDE
1.1880
3.2500
0.1600
1.25
NARROW
1.3120
2.2500
0.1600
1.25
REGULAR
1.3120
3.0000
0.1600
1.25
WIDE
1.3120
3.5000
0.2500
1.375
NARROW
1.4380
2.5000
0.1600
1.375
REGULAR
1.4380
3.2500
0.1600
1.375
WIDE
1.4380
3.7500
0.2500
1.5
NARROW
1.5620
2.7500
0.1600
1.5
REGULAR
1.5620
3.5000
0.2500
1.5
WIDE
1.5620
4.0000
0.2500
1.625
NARROW
1.7500
3.0000
0.1600
1.625
REGULAR
1.7500
3.7500
0.2500
1.625
WIDE
1.7500
4.2500
0.2500
1.75
NARROW
1.8750
3.2500
0.1600
1.75
REGULAR
1.8750
4.0000
0.2500
11 - 6
SERIES
A
Inside Dia
B
Outside Dia
C
Thickness
1.75
WIDE
1.8750
4.5000
0.2500
1.875
NARROW
2.0000
3.5000
0.2500
1.875
REGULAR
2.0000
4.2500
0.2500
NARROW
2.1250
3.7500
0.2500
REGULAR
2.1250
4.5000
0.2500
WIDE
2.1250
5.0000
0.2500
2.25
NARROW
2.3750
4.0000
0.2500
2.25
REGULAR
2.3750
5.0000
0.2500
2.25
WIDE
2.3750
5.5000
0.3750
2.5
NARROW
2.6250
4.5000
0.2500
2.5
REGULAR
2.6250
5.5000
0.3750
2.5
WIDE
2.6250
6.0000
0.3750
2.75
NARROW
2.8750
5.0000
0.2500
2.75
REGULAR
2.8750
6.0000
0.3750
2.75
WIDE
2.8750
6.5000
0.3750
NARROW
3.1250
5.5000
0.3750
REGULAR
3.1250
6.5000
0.3750
WIDE
3.1250
7.0000
0.3750
ANSI Inch Plain

Washers
NOM_SIZE
11 - 7
11 - 8
12
ANSI Inch Round Head Bolts
12 - 1
Countersunk and Slotted Countersunk Bolts
Generic Part Name: ACSB

Notes:
Corresponds to standard ANSI B18.5 - 1978 (R 1971).
When a range of lengths is indicated, the range is expressed

as from to incremented by.
NAME
Basic
Dia
FracTion
body
dia
head
dia
head
hgt
length
thread
length
ACSB01
0.2500
1/4
0.26000
0.49300
0.15000
1 to 7.5 by
0.25
0.75, 1
ACSB02
0.3125
5/16
0.32400
0.61800
0.18900
1.25 to 8 by
0.25, 8.5, 9
0.875,
1.125
ACSB03
0.3750
3/8
0.38800
0.74000
0.22500
1.25 to 8 by
0.25, 8.5 to
11 by 0.5
1, 1.25
ACSB04
0.4375
7/16
0.45200
0.80300
0.22600
1.5 to 8 by
0.25, 8.5 to
13 by 0.5
1.125,
1.375
ACSB05
0.5000
1/2
0.51500
0.93500
0.26900
1.5 to 8 by
0.25, 8.5 to
15 by 0.5
1.25,
1.5
12 - 2
Basic
Dia
FracTion
body
dia
head
dia
head
hgt
length
thread
length
ACSB06
0.6250
5/8
0.64200
1.16900
0.33600
1.75 to 8 by
0.25, 8.5 to
18 by 0.5
1.5,
1.75
ACSB07
0.7500
3/4
0.76800
1.40200
0.40300
2 to 8 by
0.25, 8.5 to
20 by 0.5,
21, 22
1.75, 2
ACSB08
0.8750
7/8
0.89500
1.63700
0.47000
2.25 to 8 by
0.25, 8.5 to
20 by 0.5,
21 to 24 by
1
2, 2.25
ACSB09
1.0000
1.02200
1.86900
0.53700
2.5 to 8 by
0.25, 8.5 to
20 by 0.5,
21 to 24 by
1
2.25,
2.5
ACSB10
1.1250
1-1/8
1.14900
2.10400
0.60400
2.75 to 8 by
0.25, 8.5 to
20 by 0.5,
21 to 24 by
1
2.5,
2.75
ACSB11
1.2500
1-1/4
1.27700
2.33700
0.67100
3 to 8 by
0.25, 8.5 to
20 by 0.5,
21 to 24 by
1
2.75, 3
ACSB12
1.3750
1-3/8
1.40400
2.57100
0.73800
3.25 to 8 by
0.25, 8.5 to
20 by 0.5,
21 to 24 by
1
3, 3.25
ACSB13
1.5000
1-1/2
1.53100
2.80400
0.80500
3.5 to 8 by
0.25, 8.5 to
20 by 0.5,
21 to 24 by
1
3.25,
3.5
12 - 3
ANSI Inch Round

Head Bolts
NAME
114 Degree Countersunk Square Neck Bolts
Generic Part Name: ACSN

Notes:
NAME
Basic
Dia

Fraction
body
dia
head
dia
head
hgt
sqr
width
sqr
depth
length
thread
length
0.5,
0.625,
0.875
ACSN01
0.1900
No. 10
0.1990
0.5480
0.1310
0.1990
0.1250
0.75 to 7
by 0.25
ACSN02
0.2500
1/4
0.2600
0.6820
0.1540
0.2600
0.1560
1 to 7.5
by 0.25
0.75, 1
0.2190
1.25 to 8
by 0.25,
8.5, 9
0.875,
1.125
0.2500
1.25 to 8
by 0.25,
8.5 to 11
by 0.5
1, 1.25
0.2810
1.5 to 8
by 0.25,
8.5 to 13
by 0.5
1.125,
1.375
0.3120
1.5 to 8
by 0.25,
8.5 to 15
by 0.5
1.25,
1.5
ACSN03
ACSN04
ACSN05
ACSN06
12 - 4
0.3125
0.3750
0.4375
0.5000
5/16
3/8
7/16
1/2
0.3240
0.3880
0.4520
0.5150
0.8210
0.9600
1.0930
1.2330
0.1840
0.2120
0.2350
0.2650
0.3240
0.3880
0.4520
0.5150
NAME
ACSN07
ACSN08
Basic
Dia
0.6250
0.7500
Fraction
body
dia
5/8
0.6420
3/4
0.7680
head
dia
1.4950
1.7540
head
hgt
0.3160
0.3680
sqr
width
0.6420
0.7680
sqr
depth
length
thread
length
0.4060
1.75 to 8
by 0.25,
8.5 to 18
by 0.5
1.5,
1.75
0.5000
2 to 8 by
0.25, 8.5
to 20 by
0.5, 21,
22
1.75, 2
Round Head Fin Neck Bolts
Generic Part Name: AFNB

NAME
BASIC
DIA
FRACTION
body_
dia
head_
dia
head_
hgt
length
thread_
length
AFNB01
0.1900
No. 10
0.1990
0.46900
0.11400
0.75 to 7 by
0.25
0.625, 0.875
0.75, 1
0.875, 1.125
AFNB02
0.2500
1/4
0.2600
0.59400
0.14500
1 to 7.5 by
0.25
AFNB03
0.3120
5/16
0.3240
0.71900
0.17600
1.25 to 8 by
0.25, 8.5, 9
12 - 5
ANSI Inch Round

Head Bolts
Notes:
BASIC
DIA
NAME
AFNB04
AFNB05
AFNB06
FRACTION
0.3750
3/8
0.4380
0.3880
7/16
0.5000
body_
dia
0.4520
1/2
0.5150
head_
dia
0.84400
0.96900
1.09400
head_
hgt
length
thread_
length
0.20800
1.25 to 8 by
0.25, 8.5 to
11 by 0.5
1, 1.25
0.23900
1.5 to 8 by
0.25, 8.5 to
13 by 0.5
1.125, 1.375
0.27000
1.5 to 8 by
0.25, 8.5 to
15 by 0.5
1.25, 1.5
Round Head Square Neck Bolts
Generic Part Name: ALSN

Notes:
NAME
BASIC
DIA

FRACTION
body_
dia
head_
dia
head_
hgt
sqr_
width
sqr_
depth
length
thread
length
0.5,
0.625,
0.875
0.75, 1
ALSN01
0.1900
No. 10
0.1990
0.4690
0.1140
0.1990
0.1250
0.75 to 7
by 0.25
ALSN02
0.2500
1/4
0.2600
0.5940
0.1450
0.2600
0.1560
1 to 7.5
by 0.25
12 - 6
NAME
ALSN03
ALSN04
ALSN05
ALSN06
ALSN07
ALSN08
ALSN09
0.3125
0.3750
0.4375
0.5000
0.6250
0.7500
0.8750
1.0000
FRACTION
5/16
3/8
7/16
1/2
5/8
3/4
7/8
body_
dia
0.3240
0.3880
0.4520
0.5150
0.6420
0.7680
0.8950
1.022
head_
dia
0.7190
0.8440
0.9690
1.0940
1.3440
1.5940
1.8440
2.0940
head_
hgt
0.1760
0.2080
0.2390
0.2700
0.3440
0.4060
0.4690
0.5310
sqr_
width
0.3240
0.3880
0.4520
0.5150
0.6420
0.7680
0.8950
1.0220
sqr_
depth
length
thread
length
0.1870
1.25 to 8
by 0.25,
8.5, 9
0.875,
1.125
0.2190
1.25 to 8
by 0.25,
8.5 to 11
by 0.5
1, 1.25
0.2500
1.5 to 8
by 0.25,
8.5 to 13
by 0.5
1.125,
1.375
0.2810
1.5 to 8
by 0.25,
8.5 to 15
by 0.5
1.25, 1.5
0.3440
1.75 to 8
by 0.25,
8.5 to 18
by 0.5
1.5, 1.75
0.4060
2 to 8 by
0.25, 8.5
to 20 by
0.5, 21,
22
1.75, 2
0.4690
2.25 to 8
by 0.25,
8.5 to 20
by 0.5,
21 to 24
by 1
2, 2.25
0.5310
2.5 to 8
by 0.25,
8.5 to 20
by 0.5,
21 to 24
by 1
2.25, 2.5
12 - 7
ANSI Inch Round

Head Bolts
ALSN10
BASIC
DIA
Round Head Bolts
Generic Part Name: ARHB

Notes:

NAME
BASIC_
DIA
FRACTION
body_
dia
head_
dia
head_
hgt
length
thread_
length
ARHB01
0.19000
No. 10
0.19900
0.46900
0.11400
0.75 to 7 by
0.25
0.625, 0.875
ARHB02
0.25000
1/4
0.26000
0.59400
0.14500
1 to 7.5 by
0.25
0.75, 1
0.17600
1.25 to 8 by
0.25, 8.5, 9
0.875, 1.125
0.20800
1.25 to 8 by
0.25, 8.5 to
11 by 0.5
1, 1.25
0.23900
1.5 to 8 by
0.25, 8.5 to
13 by 0.5
1.125, 1.375
0.27000
1.5 to 8 by
0.25, 8.5 to
15 by 0.5
1.25, 1.5
0.34400
1.75 to 8 by
0.25, 8.5 to
18 by 0.5
1.5, 1.75
ARHB03
ARHB04
ARHB05
ARHB06
ARHB07
12 - 8
0.31200
0.37500
0.43800
0.50000
0.62500
5/16
3/8
7/16
1/2
5/8
0.32400
0.38800
0.45200
0.51500
0.64200
0.71900
0.84400
0.96900
1.09400
1.34400
NAME
ARHB08
ARHB09
ARHB10
BASIC_
DIA
FRACTION
0.75000
body_
dia
3/4
0.87500
0.76800
7/8
1.00000
0.89500
1.02200
head_
dia
1.59400
1.84400
2.09400
head_
hgt
length
thread_
length
0.40600
2 to 8 by 0.25,
8.5 to 20 by
0.5, 21, 22
1.75, 2
0.46900
2.25 to 8 by
0.25, 8.5 to
20 by 0.5, 21
to 24 by 1
2, 2.25
0.53100
2.5 to 8 by
0.25, 8.5 to
20 by 0.5, 21
to 24 by 1
2.25, 2.5
Step Bolts
Generic Part Name: ARSB
NAME
BASIC
DIA

FRACTION
body_
dia
head_
dia
head_
hgt
sqr_
width
sqr_
depth
length
thread
length
0.5,
0.625,
0.875
0.75, 1
ARSB01
0.1900
No. 10
0.1990
0.6560
0.1140
0.1990
0.1250
0.75 to 7
by 0.25
ARSB02
0.2500
1/4
0.2600
0.8440
0.1450
0.2600
0.1560
1 to 7.5
by 0.25
12 - 9
ANSI Inch Round

Head Bolts
Notes:
NAME
ARSB03
ARSB04
ARSB05
ARSB06
BASIC
DIA
0.3120
0.3750
0.4380
0.5000
FRACTION
5/16
3/8
7/16
1/2
body_
dia
0.3240
0.3880
0.4520
0.5150
head_
dia
1.0310
1.2190
1.4060
1.5940
head_
hgt
0.1760
0.2080
0.2390
0.2700
sqr_
width
0.3240
0.3880
0.4520
0.5150
sqr_
depth
length
thread
length
0.1870
1.25 to 8
by 0.25,
8.5, 9
0.875,
1.125
0.2190
1.25 to 8
by 0.25,
8.5 to 11
by 0.5
1, 1.25
0.2500
1.5 to 8
by 0.25,
8.5 to 13
by 0.5
1.125,
1.375
0.2810
1.5 to 8
by 0.25,
8.5 to 15
by 0.5
1.25, 1.5
Round Head Ribbed Neck Bolts
Generic Part Name: ARSN

Notes:
12 - 10

NAME
BASIC
DIA
FRACTION
body_
dia
head_
dia
head_
hgt
rib_
dia
rib_
depth
length
thread
length
0.75 to 7
by 0.25
0.625,
0.875
ARSN01
0.1900
No. 10
0.1990
0.469
0.1140
0.2100
0.250,
0.407,
0.594
ARSN02
0.2500
1/4
0.260
0.594
0.1450
0.2740
0.407,
0.594
1 to 7.5
by 0.25
0.5,
0.75, 1
0.594
1.25 to 8
by 0.25,
8.5, 9
0.5,
0.875,
1.125
0.594
1.25 to 8
by 0.25,
8.5 to 11
by 0.5
0.625,
0.875, 1,
1.25
0.594
1.5 to 8
by 0.25,
8.5 to 13
by 0.5
0.875,
1.125,
1.375
0.594
1.5 to 8
by 0.25,
8.5 to 15
by 0.5
0.75, 1,
1.25, 1.5
0.625
1.75 to 8
by 0.25,
8.5 to 18
by 0.5
1, 1.125,
1.5, 1.75
0.625
2 to 8 by
0.25, 8.5
to 20 by
0.5, 21,
22
1.25,
1.375,
1.75, 2
ARSN03
ARSN04
ARSN05
ARSN06
ARSN07
ARSN08
0.3125
0.3750
0.4375
0.5000
0.6250
0.7500
5/16
3/8
7/16
1/2
5/8
3/4
0.3240
0.3880
0.4520
0.5150
0.6420
0.7680
0.719
0.844
0.969
1.094
1.344
1.594
0.1760
0.2080
0.2390
0.2700
0.3440
0.4060
0.0310
0.4050
0.0310
0.5340
0.6600
0.7850
ANSI Inch Round

Head Bolts
12 - 11
Round Head Short Square Neck Bolts
Generic Part Name: ASSN

Notes:

NAME
BASIC
DIA
FRACTION
body_
dia
head_
dia
head_
hgt
sqr_
width
sqr_
depth
length
thread
length
ASSN01
0.2500
1/4
0.2600
0.5940
0.1450
0.2600
0.1240
1 to 7.5
by 0.25
0.75, 1
0.1240
1.25 to
8 by
0.25,
8.5, 9
0.875,
1.125
0.1560
1.25 to
8 by
0.25,
8.5 to
11 by
0.5
1, 1.25
0.1560
1.5 to 8
by
0.25,
8.5 to
13 by
0.5
1.125,
1.375
ASSN02
ASSN03
ASSN04
12 - 12
0.3120
0.3750
0.4380
5/16
3/8
7/16
0.3240
0.3880
0.4520
0.7190
0.8440
0.9690
0.1760
0.2080
0.2390
0.3240
0.3880
0.4520
NAME
ASSN05
ASSN06
ASSN07
BASIC
DIA
0.5000
0.6250
0.7500
FRACTION
1/2
body_
dia
0.5150
5/8
0.6420
3/4
0.7680
head_
dia
1.0940
1.3440
1.5940
head_
hgt
0.2700
0.3440
0.4060
sqr_
width
0.5150
0.6420
0.7680
sqr_
depth
length
thread
length
0.1560
1.5 to 8
by
0.25,
8.5 to
15 by
0.5
1.25,
1.5
0.2180
1.75 to
8 by
0.25,
8.5 to
18 by
0.5
1.5,
1.75
0.2180
2 to 8
by
0.25,
8.5 to
20 by
0.5, 21,
22
1.75, 2
T-Head Bolts
ANSI Inch Round

Head Bolts
Generic Part Name: ATHB

Notes:

12 - 13
NAME
BASIC
DIA
FRACTION
body_
dia
head_
length
head_
width
head_
hgt
length
thread_
length
ATHB01
0.2500
1/4
0.2600
0.50000
0.28000
0.20000
1 to 7.5 by
0.25
0.75, 1
0.27000
1.25 to 8
by 0.25,
8.5, 9
0.875,
1.125
0.33000
1.25 to 8
by 0.25,
8.5 to 11
by 0.5
1, 1.25
0.39000
1.5 to 8 by
0.25, 8.5
to 13 by
0.5
1.125,
1.375
0.46000
1.5 to 8 by
0.25, 8.5
to 15 by
0.5
1.25, 1.5
0.59000
1.75 to 8
by 0.25,
8.5 to 18
by 0.5
1.5, 1.75
0.65000
2 to 8 by
0.25, 8.5
to 20 by
0.5, 21, 22
1.75, 2
0.78000
2.25 to 8
by 0.25,
8.5 to 20
by 0.5, 21
to 24 by 1
2. 2.25
0.90000
2.5 to 8 by
0.25, 8.5
to 20 by
0.5, 21 to
24 by 1
2.25, 2.5
ATHB02
ATHB03
ATHB04
ATHB05
ATHB06
ATHB07
ATHB08
ATHB09
12 - 14
0.3125
0.3750
0.4375
0.5000
0.6250
0.7500
0.8750
1.0000
5/16
3/8
7/16
1/2
5/8
3/4
7/8
0.3200
0.3900
0.4500
0.5200
0.6400
0.7700
0.9000
1.0200
0.63000
0.75000
0.88000
1.00000
1.25000
1.50000
1.75000
2.00000
0.34000
0.41000
0.47000
0.53000
0.68000
0.80000
0.94000
1.06000
13
ANSI Inch Slotted Head Cap,
Square Head Set, and Slotted
Headless Set Screws

decimal value of the nominal diameter of the part. In some cases,
however, the callouts are numbers. Those numbers correspond to
the following values of the nominal diameter:
BASIC_DIA
Nominal Diameter
NO.0000
0.0210
NO.000
0.0340
NO.00
0.0470
NO.0
0.0600
NO.1
0.0730
NO.2
0.0860
NO.3
0.0990
NO.4
0.1120
NO.5
0.1250
NO.6
0.1380
NO.8
0.1640
NO.10
0.1900
13 - 1
BASIC_DIA
Nominal Diameter
NO.12
0.2160
Slotted Flat Countersunk Head Cap Screw
Generic part name: CSAA

Notes:
Corresponds to standard ANSI B18.6.2-1972
Length given as: from - to, incremented by.
BASIC_
DIA
A
Head
Diameter
J
Slot
Width
T
Slot
Depth
U
Fillet
Radius
L
Lengths
.25
0.500
0.075
0.068
0.100
0.25-1.0, .125;
1.0-3.0, .25
.3125
0.625
0.084
0.086
0.125
0.375-1.0, .125;
1.0-3.25, .25
.375
0.750
0.094
0.103
0.150
0.5-1.0, .125;
1.0-4.0, .25
.4375
0.812
0.094
0.103
0.175
0.5-1.0, .125;
1.0-4.0, .25
13 - 2
BASIC LIBRARY Catalog with UDF Librarye
BASIC_
DIA
A
Head
Diameter
J
Slot
Width
T
Slot
Depth
U
Fillet
Radius
L
Lengths
.5
0.875
0.106
0.103
0.200
0.625-1.0, .125;
1.0-4.0, .25
.5625
1.000
0.118
0.120
0.225
0.75-4.0, .25
.625
1.125
0.133
0.137
0.250
0.75-4.0, .25
.75
1.375
0.149
0.171
0.300
1.0-3.0, .25;
3.0-5.0, .5
.875
1.625
0.167
0.206
0.350
1.0-3.0, .25;
3.0-5.0, .5
1.875
0.188
0.240
0.400
1.0-3.0, .25;
3.0-6.0, .5
1.125
2.062
0.196
0.257
0.450
1.0-3.0, .25;
3.0-6.0, .5
1.25
2.312
0.211
0.291
0.500
1.0-3.0, .25;
3.0-6.0, .5
1.375
2.562
0.226
0.326
0.550
1.5-3.0, .25;
3.0-6.0, .5
1.5
2.812
0.258
0.360
0.600
1.5-3.0, .25;
3.0-6.0, .5
Slotted Round Head Cap Screw
ANSI Inch Slotted

Head Cap, Square
ANSI Inch Slotted Head Cap, Square Head Set, and Slotted Headless Set Screws
13 - 3
Generic part name: CSBB

Notes:
BASIC_
DIA
A
Head
Diam
H
Head
Height
J
Slot
Width
T
Slot
Depth
U
Fillet
Radius
L
Lengths
.25
0.437
0.191
0.075
0.117
0.031
0.25-1.0, .125;
1.0-3.0, .25
.3125
0.562
0.245
0.084
0.151
0.031
0.375-1.0, .125;
1.0-3.25, .25
.375
0.625
0.273
0.094
0.168
0.031
0.5-1.0, .125;
1.0-4.0, .25
.4375
0.750
0.328
0.094
0.202
0.047
0.5-1.0, .125;
1.0-4.0, .25
.5
0.812
0.354
0.106
0.218
0.047
0.625-1.0, .125;
1.0-4.0, .25
.5625
0.937
0.409
0.118
0.252
0.047
0.75-4.0, .25
.625
1.000
0.437
0.133
0.270
0.062
0.75-4.0, .25
.75
1.250
0.546
0.149
0.338
0.062
1.0-3.0, .25;
3.0-5.0, .5
13 - 4
Slotted Fillister Head Cap Screw
Generic part name: CSCC

Notes:
A
Head
Diam
H
Head
Side
Hgt
O
Total
Head
Hgt
J
Slot
Width
T
Slot
Depth
U
Fillet
Rad
L
Lengths
.25
0.375
0.172
0.216
0.075
0.097
0.031
0.25-1.0, .125;
1.0-3.0, .25
.3125
0.437
0.203
0.253
0.084
0.115
0.031
0.375-1.0, .125;
1.0-3.25, .25
.375
0.562
0.250
0.314
0.094
0.142
0.031
0.5-1.0, .125;
1.0-4.0, .25
.4375
0.625
0.297
0.368
0.094
0.168
0.047
0.5-1.0, .125;
1.0-4.0, .25
.5
0.750
0.328
0.413
0.106
0.193
0.047
0.625-1.0, .125;
1.0-4.0, .25
.5625
0.812
0.375
0.467
0.118
0.213
0.047
0.75-4.0, .25
.625
0.875
0.422
0.521
0.133
0.239
0.062
0.75-4.0, .25
13 - 5
ANSI Inch Slotted

Head Cap, Square
BASIC_
DIA
BASIC_
DIA
A
Head
Diam
H
Head
Side
Hgt
O
Total
Head
Hgt
J
Slot
Width
T
Slot
Depth
U
Fillet
Rad
L
Lengths
.75
1.000
0.500
0.612
0.149
0.283
0.062
1.0-3.0, .25;
3.0-5.0, .5
.875
1.125
0.594
0.720
0.167
0.334
0.062
1.0-3.0, .25;
3.0-5.0, .5
1.312
0.656
0.803
0.188
0.371
0.062
1.0-3.0, .25;
3.0-6.0, .5
Slotted Headless Set Screw, Flat Point
Generic part name: SSAA

Notes:
13 - 6
BASIC_DIA
J
Slot
Width
T
Slot
Depth
C
Flat Point
Diameter
L
Lengths
NO.0
0.014
0.020
0.033
0.0625-0.375, .0625
BASIC_DIA
J
Slot
Width
T
Slot
Depth
C
Flat Point
Diameter
L
Lengths
NO.1
0.016
0.020
0.040
0.0625-0.375, .0625
NO.2
0.018
0.025
0.047
0.0625-0.5, .0625
NO.3
0.020
0.028
0.054
0.125-0.5, .0625
NO.4
0.024
0.031
0.061
0.125-0.5, .0625
NO.5
0.026
0.036
0.067
0.125-0.625, .0625
NO.6
0.028
0.040
0.074
0.125-0.625, .0625
NO.8
0.032
0.046
0.087
0.125-0.75, .0625
NO.10
0.035
0.053
0.102
0.125-0.875, .0625
NO.12
0.042
0.061
0.115
0.125-1.0, .0625
.25
0.049
0.068
0.132
0.1875-1.25, .0625
.3125
0.055
0.083
0.172
0.25-1.5, .125
.375
0.068
0.099
0.212
0.375-1.75, .125
.4375
0.076
0.114
0.252
0.375-2.0, .125
.5
0.086
0.130
0.291
0.375-2.25, .125
.5625
0.096
0.146
0.332
0.375-2.5, .125
.625
0.107
0.161
0.371
0.375-2.5, .125
.75
0.134
0.193
0.450
0.5-2.5, .125
Slotted Headless Set Screw, Dog Point
ANSI Inch Slotted

Head Cap, Square
13 - 7
Generic part name: SSBB

Notes:
BASIC_
DIA
J
Slot
Width
T
Slot
Depth
P
Point
Diameter
Q
Point
Length
L
Lengths
NO.0
0.014
0.020
0.040
0.032
0.0625-0.375, .0625
NO.1
0.016
0.020
0.049
0.040
0.0625-0.375, .0625
NO.2
0.018
0.025
0.057
0.046
0.0625-0.5, .0625
NO.3
0.020
0.028
0.066
0.052
0.125-0.5, .0625
NO.4
0.024
0.031
0.075
0.058
0.125-0.5, .0625
NO.5
0.026
0.036
0.083
0.063
0.125-0.625, .0625
NO.6
0.028
0.040
0.092
0.073
0.125-0.625, .0625
NO.8
0.032
0.046
0.109
0.083
0.125-0.75, .0625
NO.10
0.035
0.053
0.127
0.095
0.125-0.875, .0625
NO.12
0.042
0.061
0.144
0.115
0.125-1.0, .0625
.25
0.049
0.068
0.156
0.130
0.1875-1.25, .0625
.3125
0.055
0.083
0.203
0.161
0.25-1.5, .125
.375
0.068
0.099
0.250
0.193
0.375-1.75, .125
.4375
0.076
0.114
0.297
0.224
0.375-2.0, .125
.5
0.086
0.130
0.344
0.255
0.375-2.25, .125
.5625
0.096
0.146
0.391
0.287
0.375-2.5, .125
.625
0.107
0.161
0.469
0.321
0.375-2.5, .125
.75
0.134
0.193
0.562
0.383
0.5-2.5, .125
13 - 8
Slotted Headless Set Screw, Half Dog Point
Generic part name: SSCC

Notes:
J
Slot
Width
T
Slot
Depth
P
Point
Diameter
Q
Point
Length
L
Lengths
NO.0
0.014
0.020
0.040
0.017
0.0625-0.375, .0625
NO.1
0.016
0.020
0.049
0.021
0.0625-0.375, .0625
NO.2
0.018
0.025
0.057
0.024
0.0625-0.5, .0625
NO.3
0.020
0.028
0.066
0.027
0.125-0.5, .0625
NO.4
0.024
0.031
0.075
0.030
0.125-0.5, .0625
NO.5
0.026
0.036
0.083
0.033
0.125-0.625, .0625
NO.6
0.028
0.040
0.092
0.038
0.125-0.625, .0625
NO.8
0.032
0.046
0.109
0.043
0.125-0.75, .0625
NO.10
0.035
0.053
0.127
0.050
0.125-0.875, .0625
NO.12
0.042
0.061
0.144
0.060
0.125-1.0, .0625
13 - 9
ANSI Inch Slotted

Head Cap, Square
BASIC_
DIA
BASIC_
DIA
J
Slot
Width
T
Slot
Depth
P
Point
Diameter
Q
Point
Length
L
Lengths
.25
0.049
0.068
0.156
0.068
0.1875-1.25, .0625
.3125
0.055
0.083
0.203
0.083
0.25-1.5, .125
.375
0.068
0.099
0.250
0.099
0.375-1.75, .125
.4375
0.076
0.114
0.297
0.114
0.375-2.0, .125
.5
0.086
0.130
0.344
0.130
0.375-2.25, .125
.5625
0.096
0.146
0.391
0.146
0.375-2.5, .125
.625
0.107
0.161
0.469
0.164
0.375-2.5, .125
.75
0.134
0.193
0.562
0.196
0.5-2.5, .125
Slotted Headless Set Screw, Cone Point
Generic part name: SSDD

Notes:
13 - 10
BASIC_DIA
J
Slot
Width
T
Slot
Depth
L
Lengths
NO.0
0.014
0.020
0.0625-0.375, .0625
NO.1
0.016
0.020
0.0625-0.375, .0625
NO.2
0.018
0.025
0.0625-0.5, .0625
NO.3
0.020
0.028
0.125-0.5, .0625
NO.4
0.024
0.031
0.125-0.5, .0625
NO.5
0.026
0.036
0.125-0.625, .0625
NO.6
0.028
0.040
0.125-0.625, .0625
NO.8
0.032
0.046
0.125-0.75, .0625
NO.10
0.035
0.053
0.125-0.875, .0625
NO.12
0.042
0.061
0.125-1.0, .0625
.25
0.049
0.068
0.1875-1.25, .0625
.3125
0.055
0.083
0.25-1.5, .125
.375
0.068
0.099
0.25-1.75, .125
.4375
0.076
0.114
0.375-2.0, .125
.5
0.086
0.130
0.375-2.25, .125
.5625
0.096
0.146
0.375-2.5, .125
.625
0.107
0.161
0.375-2.5, .125
.75
0.134
0.193
0.5-2.5, .125
ANSI Inch Slotted

Head Cap, Square
13 - 11
Slotted Headless Set Screw, Oval Point
Generic part name: SSEE

Notes:
BASIC_DIA
J
Slot
Width
T
Slot
Depth
R
Point
Radius
L
Lengths
NO.0
0.0140
0.0200
0.0450
0.0625-0.375, .0625
NO.1
0.0160
0.0200
0.0550
0.0625-0.375, .0625
NO.2
0.0180
0.0250
0.0640
0.0625-0.5, .0625
NO.3
0.0200
0.0280
0.0740
0.125-0.5, .0625
NO.4
0.0240
0.0310
0.0840
0.125-0.5, .0625
NO.5
0.0260
0.0360
0.0940
0.125-0.625, .0625
NO.6
0.0280
0.0400
0.1040
0.125-0.625, .0625
NO.8
0.0320
0.0460
0.1230
0.125-0.75, .0625
NO.10
0.0350
0.0530
0.1420
0.125-0.875, .0625
NO.12
0.0420
0.0610
0.1620
0.125-1.0, .0625
.25
0.0490
0.0680
0.1880
0.1875-1.25, .0625
.3125
0.0550
0.0830
0.2340
0.25-1.5, .125
13 - 12
BASIC_DIA
J
Slot
Width
T
Slot
Depth
R
Point
Radius
L
Lengths
.375
0.0680
0.0990
0.2810
0.375-1.75, .125
.4375
0.0760
0.1140
0.3280
0.375-2.0, .125
.5
0.0860
0.1300
0.3750
0.375-2.25, .125
.5625
0.0960
0.1460
0.4220
0.375-2.5, .125
.625
0.1070
0.1610
0.4690
0.375-2.5, .125
.75
0.1340
0.1930
0.5620
0.5-2.5, .125
Slotted Headless Set Screw, Cup Point
Generic part name: SSFF

Notes:
ANSI Inch Slotted

Head Cap, Square
13 - 13
BASIC_DIA
J
Slot
Width
T
Slot
Depth
C
Point
Diameter
L
Lengths
NO.0
0.014
0.020
0.033
0.0625-0.375, .0625
NO.1
0.016
0.020
0.040
0.0625-0.375, .0625
NO.2
0.018
0.025
0.047
0.0625-0.5, .0625
NO.3
0.020
0.028
0.054
0.125-0.5, .0625
NO.4
0.024
0.031
0.061
0.125-0.5, .0625
NO.5
0.026
0.036
0.067
0.125-0.625, .0625
NO.6
0.028
0.040
0.074
0.125-0.625, .0625
NO.8
0.032
0.046
0.087
0.125-0.75, .0625
NO.10
0.035
0.053
0.102
0.125-0.875, .0625
NO.12
0.042
0.061
0.115
0.125-1.0, .0625
.25
0.049
0.068
0.132
0.1875-1.25, .0625
.3125
0.055
0.083
0.172
0.25-1.5, .125
.375
0.068
0.099
0.212
0.375-1.75, .125
.4375
0.076
0.114
0.252
0.375-2.0, .125
.5
0.086
0.130
0.291
0.375-2.25, .125
.5625
0.096
0.146
0.332
0.375-2.5, .125
.625
0.107
0.161
0.371
0.375-2.5, .125
.75
0.134
0.193
0.450
0.5-2.5, .125
13 - 14
Square Head Set Screw (Flat Head Type), Flat

Point
Generic part name: SSGG

Notes:
F
Flat
Width
H
Head
Height
W
Head
Radius
L
Lengths
.19
0.1900
0.1480
0.4800
0.1875-0.5, .0625;
0.5-2.0, .125
.25
0.2500
0.1960
0.6200
0.25-0.5, .0625;
0.5-2.0, .125
.3125
0.3125
0.2450
0.7800
0.375-0.75, .0625;
0.75-3.0, .25
.375
0.3750
0.2930
0.9400
0.375-0.75, .0625;
0.75-3.0, .25
.4375
0.4375
0.3410
1.0900
0.75-4.0, .25
.5
0.5000
0.3890
1.2500
0.75-4.0, .25
.5625
0.5625
0.4370
1.4100
0.75-4.5, .25
ANSI Inch Slotted

Head Cap, Square
BASIC_DIA
13 - 15
BASIC_DIA
F
Flat
Width
H
Head
Height
W
Head
Radius
L
Lengths
.625
0.6250
0.4850
1.5600
0.75-5.0, .25
.75
0.7500
0.5820
1.8800
1.0-6.0, .25
.875
0.8750
0.6780
2.1900
1.25-6.0, .25
1.0000
0.7740
2.5000
1.25-6.0, .25
1.125
1.1250
0.8700
2.8100
1.25-6.0, .25
1.25
1.2500
0.9660
3.1200
1.25-6.0, .25
1.375
1.3750
1.0630
3.4400
2.0-7.0, .5
1.5
1.5000
1.1590
3.7500
2.0-8.0, .5
Square Head Set Screw (Flat Head Type), Dog

Point
Generic part name: SSHH

Notes:
13 - 16
BASIC_
DIA
F
Flat
Width
H
Head
Height
W
Head
Radius
P
Point
Diameter
Q
Point
Length
L
Lengths
.19
0.1900
0.1480
0.4800
0.1270
0.0950
0.1875-0.5, .0625;
0.5-2.0, .125
.25
0.2500
0.1960
0.6200
0.1560
0.1300
0.25-0.5, .0625;
0.5-2.0, .125
.3125
0.3125
0.2450
0.7800
0.2030
0.1610
0.375-0.75, .0625
0.75-3.0, .25
.375
0.3750
0.2930
0.9400
0.2500
0.1930
0.375-0.75, .0625
0.75-3.0, .25
.4375
0.4375
0.3410
1.0900
0.2970
0.2240
0.75-4.0, .25
.5
0.5000
0.3890
1.2500
0.3440
0.2550
0.75-4.0, .25
.5625
0.5625
0.4370
1.4100
0.3910
0.2870
0.75-4.5, .25
.625
0.6250
0.4850
1.5600
0.4690
0.3210
0.75-5.0, .25
.75
0.7500
0.5820
1.8800
0.5620
0.3830
1.0-6.0, .25
.875
0.8750
0.6780
2.1900
0.6560
0.4460
1.25-6.0, .25
1.0000
0.7740
2.5000
0.7500
0.5100
1.25-6.0, .25
1.125
1.1250
0.8700
2.8100
0.8440
0.5720
1.25-6.0, .25
1.25
1.2500
0.9660
3.1200
0.9380
0.6350
1.25-6.0, .25
1.375
1.3750
1.0630
3.4400
1.0310
0.6980
2.0-7.0, .5
1.5
1.5000
1.1590
3.7500
1.1250
0.7600
2.0-8.0, .5
ANSI Inch Slotted

Head Cap, Square
13 - 17
Square Head Set Screw (Flat Head Type), Half

Dog Point
Generic part name: SSII

Notes:
BA
SIC_
DIA
F
Flat
Width
H
Head
Height
W
Head
Radius
P
Point
Diameter
Q
Point
Length
L
Lengths
.19
0.1900
0.1480
0.4800
0.1270
0.0500
0.1875-0.5, .0625;
0.5-2.0, .125
.25
0.2500
0.1960
0.6200
0.1560
0.0680
0.25-0.5, .0625;
0.5-2.0, .125
.3125
0.3125
0.2450
0.7800
0.2030
0.0830
0.375-0.75, .0625;
0.75-3.0, .25
.375
0.3750
0.2930
0.9400
0.2500
0.0990
0.375-0.75, .0625;
0.75-3.0, .25
.4375
0.4375
0.3410
1.0900
0.2970
0.1140
0.75-4.0, .25
.5
0.5000
0.3890
1.2500
0.3440
0.1300
0.75-4.0, .25
13 - 18
BA
SIC_
DIA
F
Flat
Width
H
Head
Height
W
Head
Radius
P
Point
Diameter
Q
Point
Length
L
Lengths
.5625
0.5625
0.4370
1.4100
0.3910
0.1460
0.75-4.5, .25
.625
0.6250
0.4850
1.5600
0.4690
0.1640
0.75-5.0, .25
.75
0.7500
0.5820
1.8800
0.5620
0.1960
1.0-6.0, .25
.875
0.8750
0.6780
2.1900
0.6560
0.2270
1.25-6.0, .25
1.0000
0.7740
2.5000
0.7500
0.2600
1.25-6.0, .25
1.125
1.1250
0.8700
2.8100
0.8440
0.2910
1.25-6.0, .25
1.25
1.2500
0.9660
3.1200
0.9380
0.3230
1.25-6.0, .25
1.375
1.3750
1.0630
3.4400
1.0310
0.3540
2.0-7.0, .5
1.5
1.5000
1.1590
3.7500
1.1250
0.3850
2.0-8.0, .5
Square Head Set Screw (Flat Head Type),

Cone Point
Generic part name: SSJJ
ANSI Inch Slotted

Head Cap, Square
Notes:
13 - 19
13 - 20
BASIC_
DIA
F
Flat
Width
H
Head
Height
W
Head
Radius
L
Lengths
.19
0.1900
0.1480
0.4800
0.1875-0.5, .0625
0.5-2.0, .125
.25
0.2500
0.1960
0.6200
0.25-0.5, .0625
0.5-2.0, .125
.3125
0.3125
0.2450
0.7800
0.375-0.75, .0625
0.75-3.0, .25
.375
0.3750
0.2930
0.9400
0.375-0.75, .0625
0.75-3.0, .25
.4375
0.4375
0.3410
1.0900
0.75-4.0, .25
.5
0.5000
0.3890
1.2500
0.75-4.0, .25
.5625
0.5625
0.4370
1.4100
0.75-4.5, .25
.625
0.6250
0.4850
1.5600
0.75-5.0, .25
.75
0.7500
0.5820
1.8800
1.0-6.0, .25
.875
0.8750
0.6780
2.1900
1.25-6.0, .25
1.0000
0.7740
2.5000
1.25-6.0, .25
1.12
1.1250
0.8700
2.8100
1.25-6.0, .25
1.25
1.2500
0.9660
3.1200
1.25-6.0, .25
1.375
1.3750
1.0630
3.4400
2.0-7.0, .5
1.5
1.5000
1.1590
3.7500
2.0-8.0, .5
Square Head Set Screw (Flat Head Type), Oval

Point
Generic part name: SSKK

Notes:
F
Flat
Width
H
Head
Height
W
Head
Radius
R
Point
Radius
L
Lengths
.19
0.1900
0.1480
0.4800
0.1420
0.1875-0.5, .0625;
0.5-2.0, .125
.25
0.2500
0.1960
0.6200
0.1880
0.25-0.5, .0625;
0.5-2.0, .125
.3125
0.3125
0.2450
0.7800
0.2340
0.375-0.75, .0625;
0.75-3.0, .25
.375
0.3750
0.2930
0.9400
0.2810
0.375-0.75, .0625;
0.75-3.0, .25
.4375
0.4375
0.3410
1.0900
0.3280
0.75-4.0, .25
.5
0.5000
0.3890
1.2500
0.3750
0.75-4.0, .25
.5625
0.5625
0.4370
1.4100
0.4220
0.75-4.5, .25
.625
0.6250
0.4850
1.5600
0.4690
0.75-5.0, .25
.75
0.7500
0.5820
1.8800
0.5620
1.0-6.0, .25
13 - 21
ANSI Inch Slotted

Head Cap, Square
BASIC_
DIA
BASIC_
DIA
F
Flat
Width
H
Head
Height
W
Head
Radius
R
Point
Radius
L
Lengths
.875
0.8750
0.6780
2.1900
0.6560
1.25-6.0, .25
1.0000
0.7740
2.5000
0.7500
1.25-6.0, .25
1.125
1.1250
0.8700
2.8100
0.8440
1.25-6.0, .25
1.25
1.2500
0.9660
3.1200
0.9380
1.25-6.0, .25
1.375
1.3750
1.0630
3.4400
1.0310
2.0-7.0, .5
1.5
1.5000
1.1590
3.7500
1.1250
2.0-8.0, .5
Square Head Set Screw (Flat Head Type), Cup

Point
Generic part name: SSLL

Notes:
13 - 22
BASIC_
DIA
F
Flat
Width
H
Head
Height
W
Head
Radius
L
Lengths
.19
0.1900
0.1480
0.4800
0.1875-0.5, .0625;
0.5-2.0, .125
.25
0.2500
0.1960
0.6200
0.25-0.5, .0625;
0.5-2.0, .125
.3125
0.3125
0.2450
0.7800
0.375-0.75, .0625;
0.75-3.0, .25
.375
0.3750
0.2930
0.9400
0.375-0.75, .0625;
0.75-3.0, .25
.4375
0.4375
0.3410
1.0900
0.75-4.0, .25
.5
0.5000
0.3890
1.2500
0.75-4.0, .25
.5625
0.5625
0.4370
1.4100
0.75-4.5, .25
.625
0.6250
0.4850
1.5600
0.75-5.0, .25
.75
0.7500
0.5820
1.8800
1.0-6.0, .25
.875
0.8750
0.6780
2.1900
1.25-6.0, .25
1.0000
0.7740
2.5000
1.25-6.0, .25
1.125
1.1250
0.8700
2.8100
1.25-6.0, .25
1.25
1.2500
0.9660
3.1200
1.25-6.0, .25
1.375
1.3750
1.0630
3.4400
2.0-7.0, .5
1.5
1.5000
1.1590
3.7500
2.0-8.0, .5
ANSI Inch Slotted

Head Cap, Square
13 - 23
Square Head Set Screw (Cone Head Type),

Flat Point
Generic part name: SSSS

Notes:
13 - 24
BASIC_
DIA
F
Flat
Width
H
Head
Height
W
Head
Radius
L
Lengths
.19
0.1900
0.1480
0.4800
0.1875-0.5, .0625;
0.5-2.0, .125
.25
0.2500
0.1960
0.6200
0.25-0.5, .0625;
0.5-2.0, .125
.3125
0.3125
0.2450
0.7800
0.375-0.75, .0625;
0.75-3.0, .25
.375
0.3750
0.2930
0.9400
0.375-0.75, .0625;
0.75-3.0, .25
.4375
0.4375
0.3410
1.0900
0.75-4.0, .25
.5
0.5000
0.3890
1.2500
0.75-4.0, .25
BASIC_
DIA
F
Flat
Width
H
Head
Height
W
Head
Radius
L
Lengths
.5625
0.5625
0.4370
1.4100
0.75-4.5, .25
.625
0.6250
0.4850
1.5600
0.75-5.0, .25
.75
0.7500
0.5820
1.8800
1.0-6.0, .25
.875
0.8750
0.6780
2.1900
1.25-6.0, .25
1.0000
0.7740
2.5000
1.25-6.0, .25
1.125
1.1250
0.8700
2.8100
1.25-6.0, .25
1.25
1.2500
0.9660
3.1200
1.25-6.0, .25
1.375
1.3750
1.0630
3.4400
2.0-7.0, .5
1.5
1.5000
1.1590
3.7500
2.0-8.0, .5

Dog Point
ANSI Inch Slotted

Head Cap, Square
Generic part name: SSTT

Notes:
13 - 25
BASIC_
DIA
F
Flat
Width
H
Head
Height
W
Head
Radius
P
Point
Diameter
Q
Point
Length
L
Lengths
.19
0.1900
0.1480
0.4800
0.1270
0.0950
0.1875-0.5, .0625;
0.5-2.0, .125
.25
0.2500
0.1960
0.6200
0.1560
0.1300
0.25-0.5, .0625;
0.5-2.0, .125
.3125
0.3125
0.2450
0.7800
0.2030
0.1610
0.375-0.75, .0625;
0.75-3.0, .25
.375
0.3750
0.2930
0.9400
0.2500
0.1930
0.375-0.75, .0625;
0.75-3.0, .25
.4375
0.4375
0.3410
1.0900
0.2970
0.2240
0.75-4.0, .25
.5
0.5000
0.3890
1.2500
0.3440
0.2550
0.75-4.0, .25
.5625
0.5625
0.4370
1.4100
0.3910
0.2870
0.75-4.5, .25
.625
0.6250
0.4850
1.5600
0.4690
0.3210
0.75-5.0, .25
.75
0.7500
0.5820
1.8800
0.5620
0.3830
1.0-6.0, .25
.875
0.8750
0.6780
2.1900
0.6560
0.4460
1.25-6.0, .25
1.0000
0.7740
2.5000
0.7500
0.5100
1.25-6.0, .25
1.125
1.1250
0.8700
2.8100
0.8440
0.5720
1.25-6.0, .25
1.25
1.2500
0.9660
3.1200
0.9380
0.6350
1.25-6.0, .25
1.375
1.3750
1.0630
3.4400
1.0310
0.6980
2.0-7.0, .5
1.5
1.5000
1.1590
3.7500
1.1250
0.7600
2.0-8.0, .5
13 - 26

Half Dog Point
Generic part name: SSUU

Notes:
F
Flat
Width
H
Head
Height
W
Head
Radius
P
Point
Diameter
Q
Point
Length
L
Lengths
.19
0.1900
0.1480
0.4800
0.1270
0.0500
0.1875-0.5, .0625;
0.5-2.0, .125
.25
0.2500
0.1960
0.6200
0.1560
0.0680
0.25-0.5, .0625;
0.5-2.0, .125
.3125
0.3125
0.2450
0.7800
0.2030
0.0830
0.375-0.75, .0625;
0.75-3.0, .25
.375
0.3750
0.2930
0.9400
0.2500
0.0990
0.375-0.75, .0625;
0.75-3.0, .25
.4375
0.4375
0.3410
1.0900
0.2970
0.1140
0.75-4.0, .25
.5
0.5000
0.3890
1.2500
0.3440
0.1300
0.75-4.0, .25
13 - 27
ANSI Inch Slotted

Head Cap, Square
BASIC_
DIA
BASIC_
DIA
F
Flat
Width
H
Head
Height
W
Head
Radius
P
Point
Diameter
Q
Point
Length
L
Lengths
.5625
0.5625
0.4370
1.4100
0.3910
0.1460
0.75-4.5, .25
.625
0.6250
0.4850
1.5600
0.4690
0.1640
0.75-5.0, .25
.75
0.7500
0.5820
1.8800
0.5620
0.1960
1.0-6.0, .25
.875
0.8750
0.6780
2.1900
0.6560
0.2270
1.25-6.0, .25
1.0000
0.7740
2.5000
0.7500
0.2600
1.25-6.0, .25
1.125
1.1250
0.8700
2.8100
0.8440
0.2910
1.25-6.0, .25
1.25
1.2500
0.9660
3.1200
0.9380
0.3230
1.25-6.0, .25
1.375
1.3750
1.0630
3.4400
1.0310
0.3540
2.0-7.0, .5
1.5
1.5000
1.1590
3.7500
1.1250
0.3850
2.0-8.0, .5

Cone Point
Generic part name: SSVV

Notes:
13 - 28
BASIC_
DIA
F
Flat
Width
H
Head
Height
W
Head
Radius
L
Lengths
.19
0.1900
0.1480
0.4800
0.1875-0.5, .0625;
0.5-2.0, .125
.25
0.2500
0.1960
0.6200
0.25-0.5, .0625;
0.5-2.0, .125
.3125
0.3125
0.2450
0.7800
0.375-0.75, .0625;
0.75-3.0, .25
.375
0.3750
0.2930
0.9400
0.375-0.75, .0625;
0.75-3.0, .25
.4375
0.4375
0.3410
1.0900
0.75-4.0, .25
.5
0.5000
0.3890
1.2500
0.75-4.0, .25
.5625
0.5625
0.4370
1.4100
0.75-4.5, .25
.625
0.6250
0.4850
1.5600
0.75-5.0, .25
.75
0.7500
0.5820
1.8800
1.0-6.0, .25
.875
0.8750
0.6780
2.1900
1.25-6.0, .25
1.0000
0.7740
2.5000
1.25-6.0, .25
1.12
1.1250
0.8700
2.8100
1.25-6.0, .25
1.25
1.2500
0.9660
3.1200
1.25-6.0, .25
1.375
1.3750
1.0630
3.4400
2.0-7.0, .5
1.5
1.5000
1.1590
3.7500
2.0-8.0, .5
ANSI Inch Slotted

Head Cap, Square
13 - 29

Oval Point
Generic part name: SSWW

Notes:
BASIC_
DIA
F
Flat
Width
H
Head
Height
W
Head
Radius
R
Point
Radius
L
Lengths
.19
0.1900
0.1480
0.4800
0.1420
0.1875-0.5, .0625;
0.5-2.0, .125
.25
0.2500
0.1960
0.6200
0.1880
0.25-0.5, .0625;
0.5-2.0, .125
.3125
0.3125
0.2450
0.7800
0.2340
0.375-0.75, .0625;
0.75-3.0, .25
.375
0.3750
0.2930
0.9400
0.2810
0.375-0.75, .0625;
0.75-3.0, .25
.5
0.5000
0.3890
1.2500
0.3750
0.75-4.0, .25
13 - 30
BASIC_
DIA
F
Flat
Width
H
Head
Height
W
Head
Radius
R
Point
Radius
L
Lengths
.5625
0.5625
0.4370
1.4100
0.4220
0.75-4.5, .25
.625
0.6250
0.4850
1.5600
0.4690
0.75-5.0, .25
.75
0.7500
0.5820
1.8800
0.5620
1.0-6.0, .25
.875
0.8750
0.6780
2.1900
0.6560
1.25-6.0, .25
1.0000
0.7740
2.5000
0.7500
1.25-6.0, .25
1.125
1.1250
0.8700
2.8100
0.8440
1.25-6.0, .25
1.25
1.2500
0.9660
3.1200
0.9380
1.25-6.0, .25
1.375
1.3750
1.0630
3.4400
1.0310
2.0-7.0, .5
1.5
1.5000
1.1590
3.7500
1.1250
2.0-8.0, .5

Cup Point
ANSI Inch Slotted

Head Cap, Square
Generic part name: SSXX

Notes:
13 - 31
13 - 32
BASIC_
DIA
F
Flat
Width
H
Head
Height
W
Head
Radius
L
Lengths
.19
0.1900
0.1480
0.4800
0.1875-0.5, .0625;
0.5-2.0, .125
.25
0.2500
0.1960
0.6200
0.25-0.5, .0625;
0.5-2.0, .125
.3125
0.3125
0.2450
0.7800
0.375-0.75, .0625;
0.75-3.0, .25
.375
0.3750
0.2930
0.9400
0.375-0.75, .0625;
0.75-3.0, .25
.4375
0.4375
0.3410
1.0900
0.75-4.0, .25
.5
0.5000
0.3890
1.2500
0.75-4.0, .25
.5625
0.5625
0.4370
1.4100
0.75-4.5, .25
.625
0.6250
0.4850
1.5600
0.75-5.0, .25
.75
0.7500
0.5820
1.8800
1.0-6.0, .25
.875
0.8750
0.6780
2.1900
1.25-6.0, .25
1.0000
0.7740
2.5000
1.25-6.0, .25
1.125
1.1250
0.8700
2.8100
1.25-6.0, .25
1.25
1.2500
0.9660
3.1200
1.25-6.0, .25
1.375
1.3750
1.0630
3.4400
2.0-7.0, .5
1.5
1.5000
1.1590
3.7500
2.0-8.0, .5
14
ANSI Inch Small Solid Rivets
14 - 1
Flat Head Rivet

H
L
P
BASIC_DIA
Generic part name: RGG

Notes:
Enter the BASIC_DIA and POINTED values exactly as

shown.
Flat Head Rivet without Point
14 - 2
BASIC_
DIA
POINTED
A
Head Dia
H
Head Height
L
Lengths
.062
NO
0.1400
0.0270
0.125 - 0.25, 0.025;

0.25 - 1.0, 0.05
.094
NO
0.2000
0.0380
0.125 - 0.25, 0.025;

0.25 - 1.0, 0.05
.125
NO
0.2600
0.0480
0.15 - 1.0, 0.05
.156
NO
0.3230
0.0590
0.25 - 1.0, 0.05
.188
NO
0.3870
0.0690
0.25 - 1.25, 0.1
.219
NO
0.4530
0.0800
0.25 - 1.75, 0.1
.25
NO
0.5150
0.0910
0.25 - 1.75, 0.1
.281
NO
0.5790
0.1030
0.4 - 2.0, 0.1
.312
NO
0.6410
0.1130
0.4 - 2.0, 0.1
.344
NO
0.7050
0.1240
0.4 - 2.0, 0.1
.375
NO
0.7690
0.1350
0.5 - 2.0, 0.1
.406
NO
0.8340
0.1460
0.5 - 2.0, 0.1
Flat Head Rivet without Point

POINTED
A
Head Dia
H
Head Height
L
Lengths
.438
NO
0.8960
0.1570
0.5 - 2.0, 0.1
ANSI Inch Small

Solid Rivets
BASIC_
DIA
Flat Head Rivet with Point

BASIC_
DIA
POINTED
A
Head
Dia
H
Head
Height
P
Point
Dia
Q
Point
Length
L
Lengths
.094
YES
0.2000
0.0380
0.0770
0.0230
0.125 - 0.25, 0.025

0.25 - 1.0, 0.0
.125
YES
0.2600
0.0480
0.1020
0.0310
0.15 - 1.0, 0.05
.156
YES
0.3230
0.0590
0.1270
0.0390
0.25 - 1.0, 0.05
.188
YES
0.3870
0.0690
0.1540
0.0470
0.25 - 1.25, 0.1
.219
YES
0.4530
0.0800
0.1790
0.0550
0.25 - 1.75, 0.1
.25
YES
0.5150
0.0910
0.2040
0.0620
0.25 - 1.75, 0.1
.281
YES
0.5790
0.1030
0.2300
0.0700
0.4 - 2.0, 0.1
.312
YES
0.6410
0.1130
0.2550
0.0780
0.4 - 2.0, 0.1
.344
YES
0.7050
0.1240
0.2810
0.0860
0.4 - 2.0, 0.1
.375
YES
0.7690
0.1350
0.3070
0.0940
0.5 - 2.0, 0.1
.438
YES
0.8960
0.1570
0.3580
0.1100
0.5 - 2.0, 0.1
Flat Countersunk Head Rivet

Q
BASIC_DIA
14 - 3
Generic part name: RHH

Notes:

shown.
Flat Countersunk Head Rivet without Point

BASIC_DIA
POINTED
A
Head Dia
L
Lengths
.062
NO
0.1180
0.125 - 0.25, 0.025;

0.25 - 1.0, 0.05
.094
NO
0.1760
0.125 - 0.25, 0.025;

0.25 - 1.0, 0.05
.125
NO
0.2350
0.15 - 1.0, 0.05
.156
NO
0.2930
0.25 - 1.0, 0.05
.188
NO
0.3510
0.25 - 1.25, 0.1
.219
NO
0.4130
0.25 - 1.75, 0.1
.25
NO
0.4690
0.25 - 1.75, 0.1
.281
NO
0.5280
0.4 - 2.0, 0.1
.312
NO
0.5880
0.4 - 2.0, 0.1
.344
NO
0.6460
0.4 - 2.0, 0.1
.375
NO
0.7040
0.5 - 2.0, 0.1
.406
NO
0.7630
0.5 - 2.0, 0.1
.438
NO
0.8230
0.5 - 2.0, 0.1
Flat Countersunk Head Rivet with Point

BASIC_
DIA
POINTED
A
Head Dia
P
Point Dia
Q
Point
Height
L
Lengths
.094
YES
0.1760
0.0770
0.0230
0.125 - 0.25, 0.025

0.25 - 1.0, 0.05
.125
YES
0.2350
0.1020
0.0310
0.15 - 1.0, 0.05
14 - 4
Flat Countersunk Head Rivet with Point

POINTED
A
Head Dia
P
Point Dia
Q
Point
Height
L
Lengths
.156
YES
0.2930
0.1270
0.0390
0.25 - 1.0, 0.05
.188
YES
0.3510
0.1540
0.0470
0.25 - 1.25, 0.1
.219
YES
0.4130
0.1790
0.0550
0.25 - 1.75, 0.1
.25
YES
0.4690
0.2040
0.0620
0.25 - 1.75, 0.1
.281
YES
0.5280
0.2300
0.0700
0.4 - 2.0, 0.1
.312
YES
0.5880
0.2550
0.0780
0.4 - 2.0, 0.1
.344
YES
0.6460
0.2810
0.0860
0.4 - 2.0, 0.1
.375
YES
0.7040
0.3070
0.0940
0.5 - 2.0, 0.1
.438
YES
0.8230
0.3580
0.1100
0.5 - 2.0, 0.1
Button Head Rivet

H
Q
P
BASIC_DIA
Generic part name: RII

Notes:

shown.
14 - 5
ANSI Inch Small

Solid Rivets
BASIC_
DIA
Button Head Rivet without Point

BASIC_
DIA
POINTED
A
Head Dia
H
Head Height
L
Lengths
.062
NO
0.1220
0.0520
0.125 - 0.25, 0.025

0.25 - 1.0, 0.05
.094
NO
0.1820
0.0770
0.125 - 0.25, 0.025

0.25 - 1.0, 0.05
.125
NO
0.2350
0.1000
0.15 - 1.0, 0.05
.156
NO
0.2900
0.1240
0.025 - 1.0, 0.05
.188
NO
0.3480
0.1470
0.25 - 1.25, 0.1
.219
NO
0.4050
0.1720
0.25 - 1.75, 0.1
.25
NO
0.4600
0.1960
0.25 - 1.75, 0.1
.281
NO
0.5180
0.2200
0.4 - 2.0, 0.1
.312
NO
0.5720
0.2430
0.4 - 2.0, 0.1
.344
NO
0.6300
0.2670
0.4 - 2.0, 0.1
.375
NO
0.6840
0.2910
0.5 - 2.0, 0.1
.406
NO
0.7430
0.3160
0.5 - 2.0, 0.1
.438
NO
0.7980
0.3390
0.5 - 2.0, 0.1
Button Head Rivet with Point

BASIC
DIA
POINTED
A
Head
Dia
H
Head
Height
P
Point
Dia
Q
Point
Length
L
Lengths
.094
YES
0.1820
0.0770
0.0770
0.0230
0.125 - 0.25, 0.025;

0.25 - 1.0, 0.05
.125
YES
0.2350
0.1000
0.1020
0.0310
0.15 - 1.0, 0.05
.156
YES
0.2900
0.1240
0.1270
0.0390
0.25 - 2.0, 0.05
.188
YES
0.3480
0.1470
0.1540
0.0470
0.25 - 1.25, 0.1
.219
YES
0.4050
0.1720
0.1790
0.0550
0.25 - 1.75, 0.1
.25
YES
0.4600
0.1960
0.2040
0.0620
0.25 - 1.75, 0.1
.281
YES
0.5180
0.2200
0.2300
0.0700
0.4 - 2.0, 0.1
.312
YES
0.5720
0.2430
0.2550
0.0780
0.4 - 2.0, 0.1
14 - 6
Button Head Rivet with Point

POINTED
A
Head
Dia
H
Head
Height
P
Point
Dia
Q
Point
Length
L
Lengths
.344
YES
0.6300
0.2670
0.2810
0.0860
0.4 - 2.0, 0.1
.375
YES
0.6840
0.2910
0.3070
0.0940
0.5 - 2.0, 0.1
.438
YES
0.7980
0.3390
0.3580
0.1100
0.5 - 2.0, 0.1
Pan Head Rivet
Generic part name: RJJ

Notes:

shown.
Pan Head Rivet without Point

Basic_
Dia
Pointed
A
Head
Dia
H
Head
Height
R1
Head
Corner
Radius
R3
Head
Crown
Radius
L
Lengths
.062
NO
0.1180
0.0400
0.0190
0.2170
0.125 - 0.25, 0.025;

0.25 - 1.0, 0.05
14 - 7
ANSI Inch Small

Solid Rivets
BASIC
DIA
Pan Head Rivet without Point

Basic_
Dia
Pointed
A
Head
Dia
H
Head
Height
R1
Head
Corner
Radius
R3
Head
Crown
Radius
L
Lengths
.094
NO
0.1730
0.0600
0.0300
0.3260
0.125 - 0.25, 0.025;

0.25 - 1.0, 0.-5
.125
NO
0.2250
0.0780
0.0390
0.4290
0.15 - 1.0, 0.05
.156
NO
0.2790
0.0960
0.0490
0.5350
0.25 - 1.0, 0.05
.188
NO
0.3340
0.1140
0.0590
0.6410
0.25 - 1.25, 0.1
.219
NO
0.3910
0.1330
0.0690
0.7540
0.25 - 1.75, 0.1
.25
NO
0.4440
0.1510
0.0790
0.8580
0.25 - 1.75, 0.1
.281
NO
0.4990
0.1700
0.0880
0.9630
0.4 - 2.0, 0.1
.312
NO
0.5520
0.1870
0.0980
1.0700
0.4 - 2.0, 0.1
.344
NO
0.6080
0.2060
0.0180
1.1760
0.4 - 2.0, 0.1
.375
NO
0.6630
0.2250
0.1180
1.2860
0.5 - 2.0, 0.1
.406
NO
0.7190
0.2430
0.1270
1.3920
0.5 - 2.0, 0.1
.438
NO
0.7720
0.2610
0.1370
1.5000
0.5 - 2.0, 0.1
Pan Head Rivet with Point

Basic
Dia
PoinTed
A
Head
Dia
H
Head
Height
R1
Head
Corner
Radius
R3
Head
Crown
Radius
P
Point
Dia
Q
Point
Length
L
Lengths
.094
YES
0.1730
0.0600
0.0300
0.3260
0.0770
0.0230
0.125 0.25,
0.025;
0.25 - 1.0,
0.05
.125
YES
0.2250
0.0780
0.0390
0.4290
0.1020
0.0310
0.15 - 1.0,
0.05
.156
YES
0.2790
0.0960
0.0490
0.5350
0.1270
0.0390
0.25 - 1.0,
0.05
.188
YES
0.3340
0.1140
0.0590
0.6410
0.1540
0.0470
0.25 - 1.25,
0.1
.219
YES
0.3910
0.1330
0.0690
0.7540
0.1790
0.0550
0.25 - 1.75,
0.1
14 - 8
Pan Head Rivet with Point

PoinTed
A
Head
Dia
H
Head
Height
R1
Head
Corner
Radius
R3
Head
Crown
Radius
P
Point
Dia
Q
Point
Length
L
Lengths
.25
YES
0.4440
0.1510
0.0790
0.8580
0.2040
0.0620
0.25 - 1.75,
0.1
.281
YES
0.4990
0.1700
0.0880
0.9630
0.2300
0.0700
0.4 - 2.0,
0.1
.312
YES
0.5520
0.1870
0.0980
1.0700
0.2550
0.0780
0.4 - 2.0,
0.1
.344
YES
0.6080
0.2060
0.1080
1.1760
0.2810
0.0860
0.4 - 2.0,
0.1
.375
YES
0.6630
0.2250
0.1180
1.2860
0.3070
0.0940
0.5 - 2.0,
0.1
.438
YES
0.7720
0.2610
0.1370
1.5000
0.3580
0.1100
0.5 - 2.0,
0.1
Truss Head Rivet

H
Q
R
BASIC_DIA
Generic part name: RKK

Notes:
14 - 9
ANSI Inch Small

Solid Rivets
Basic
Dia

shown.
Truss Head Rivet without Point

BASIC_
DIA
POINTED
A
Head
Dia
H
Head
Height
R
Head
Radius
L
Lengths
.094
NO
0.2260
0.0380
0.2390
0.125 - 0.25, 0.025;

0.25 - 1.0, 0.05
.125
NO
0.2970
0.0480
0.3140
0.15 - 1.0, 0.05
.156
NO
0.3680
0.0590
0.3920
0.25 - 1.0, 0.05
.188
NO
0.4420
0.0690
0.4700
0.25 - 1.25, 0.1
.219
NO
0.5150
0.0800
0.5550
0.25 - 1.75, 0.1
.25
NO
0.5900
0.0910
0.6280
0.25 - 1.75, 0.1
.281
NO
0.6610
0.1030
0.7060
0.4 - 2.0, 0.1
.312
NO
0.7320
0.1130
0.7840
0.4 - 2.0, 0.1
.344
NO
0.8060
0.1240
0.8620
0.4 - 2.0, 0.1
.375
NO
0.8780
0.1350
0.9420
0.5 - 2.0, 0.1
.406
NO
0.9490
0.1450
1.0280
0.5 - 2.0, 0.1
.438
NO
1.0200
0.1570
1.0980
0.5 - 2.0, 0.1
Truss Head Rivet with Point

Basic
Dia
PoinTed
A
Head
Dia
H
Head
Height
R
Head
Radius
P
Point
Dia
Q
Point
Length
L
Lengths
.094
YES
0.2260
0.0380
0.2390
0.0770
0.0230
0.125 - 2.5, 0.025

0.25 - 1.0, 0.05
.125
YES
0.2970
0.0480
0.3140
0.1020
0.0310
0.15 - 1.0, 0.05
.156
YES
0.3680
0.0590
0.3920
0.1270
0.0390
0.25 - 1.0, 0.05
.188
YES
0.4420
0.0690
0.4700
0.1540
0.0470
0.25 - 1.25, 0.1
.219
YES
0.5150
0.0800
0.5550
0.1790
0.0550
0.25 - 1.75, 0.1
.25
YES
0.5900
0.0910
0.6280
0.2040
0.0620
0.25 - 1.75, 0.1
.281
YES
0.6610
0.1030
0.7060
0.2300
0.0700
0.4 - 2.0, 0.1
.312
YES
0.7320
0.1130
0.7840
0.2550
0.0780
0.4 - 2.0, 0.1
14 - 10
Truss Head Rivet with Point

YES
0.8060
0.1240
0.8620
0.2810
0.0860
0.4 - 2.0, 0.1
.375
YES
0.8780
0.1350
0.9420
0.3070
0.0940
0.5 - 2.0, 0.1
.438
YES
1.0200
0.1570
1.0980
0.3580
0.1100
0.5 - 2.0, 0.1
Tinners Rivet
H
BASIC_DIA
Generic part name: RLL

Notes:
Enter the RIVET_SIZE value exactly as shown.
RIVET_SIZE
BASIC DIA
A
Head Dia
H
Head
Height
L
Lengths
6OZ
0.0780
0.2130
0.0280
0.1350
8OZ
0.0880
0.2250
0.0360
0.1660
10OZ
0.0940
0.2500
0.0370
0.1820
12OZ
0.1040
0.2650
0.0370
0.1980
14OZ
0.1080
0.2750
0.0380
0.1980
1LB
0.1100
0.2850
0.0400
0.2130
14 - 11
ANSI Inch Small

Solid Rivets
.344
RIVET_SIZE
BASIC DIA
A
Head Dia
H
Head
Height
L
Lengths
1.25LB
0.1190
0.2950
0.0450
0.2290
1.5LB
0.1290
0.3160
0.0460
0.2440
1.75LB
0.1330
0.3310
0.0490
0.2600
2LB
0.1430
0.3410
0.0500
0.2760
2.5LB
0.1470
0.3110
0.0690
0.2910
3LB
0.1585
0.3290
0.0730
0.3230
3.5LB
0.1635
0.3480
0.0740
0.3380
4LB
0.1745
0.3680
0.0760
0.3540
5LB
0.1855
0.3880
0.0840
0.3850
6LB
0.2015
0.4190
0.0900
0.4010
7LB
0.2185
0.4310
0.0940
0.4160
8LB
0.2225
0.4750
0.1010
0.4480
9LB
0.2365
0.4900
0.1030
0.4630
10LB
0.2365
0.5050
0.1040
0.4790
12LB
0.2570
0.5320
0.1080
0.5100
14LB
0.2820
0.5770
0.1130
0.5250
16LB
0.2980
0.5970
0.1280
0.5410
18LB
0.3410
0.7060
0.1560
0.6030
14 - 12
Coopers Rivet
ANSI Inch Small
Solid Rivets
Q
A
P BASIC_DIA
Generic part name: RMM

Notes:
L
Length
s
BASIC_
DIA
A
Head
Dia
H
Head
Height
1LB
0.1080
0.2910
0.0450
0.2490
1.25LB
0.1190
0.3240
0.0500
0.2850
1.5LB
0.1290
0.3240
0.0500
0.2850
1.75LB
0.1330
0.3240
0.0520
0.3180
2LB
0.1390
0.3550
0.0560
0.3220
3LB
0.1550
0.3860
0.0580
0.1230
0.0620
0.3870
4LB
0.1635
0.3880
0.0580
0.1300
0.0620
0.4180
5LB
0.1785
0.4190
0.0630
0.1440
0.0620
0.4540
6LB
0.2015
0.4820
0.0730
0.1600
0.0940
0.4980
7LB
0.2185
0.5130
0.0760
0.1750
0.0940
0.5610
P
Point
Dia
Q
Point
Height
RIVET_
SIZE
14 - 13
RIVET_
SIZE
BASIC_
DIA
A
Head
Dia
H
Head
Height
P
Point
Dia
Q
Point
Height
L
Length
s
8LB
0.2365
0.5460
0.0810
0.1820
0.0940
0.5970
9LB
0.2435
0.5780
0.0850
0.1970
0.0940
0.6010
10LB
0.2485
0.5780
0.0850
0.1970
0.0940
0.6320
12LB
0.2570
0.5800
0.0860
0.2140
0.0940
0.6330
14LB
0.2690
0.6110
0.0910
0.2230
0.0940
0.6700
16LB
0.2790
0.6110
0.0890
0.2230
0.0940
0.6990
18LB
0.2790
0.6420
0.1080
0.2300
0.1250
0.7490
20LB
0.3100
0.7050
0.1280
0.2500
0.1250
0.7690
.375IN
0.3725
0.8000
0.1360
0.3120
0.1250
0.8400
Belt Rivet
H
Q
A
BASIC_DIA
Generic part name: RNN

Notes:
14 - 14
Basic
Dia
A
Head
Dia
H
Head
Height
P
Point
Dia
Q
Point
Height
L
Lengths
14
0.0820
0.2600
0.0420
0.0650
0.0780
0.1875 - 0.25, 0.03125;

0.25 - 1.0, 0.0625
13
0.0940
0.3220
0.0510
0.0730
0.0780
0.1875 - 0.25, 0.03125;

0.25 - 1.0, 0.0625
12
0.1080
0.3530
0.0540
0.0830
0.0780
0.25 - 1.0, 0.0625
11
0.1190
0.3830
0.0590
0.0970
0.0780
0.25 - 1.0, 0.0625
10
0.1330
0.4170
0.0650
0.1090
0.0940
0.25 - 1.0, 0.0625
0.1470
0.4480
0.0690
0.1220
0.0940
0.3125 - 1.0, 0.0625
0.1640
0.4810
0.0720
0.1350
0.0940
0.3125 - 1.0, 0.0625
0.1785
0.5130
0.0750
0.1510
0.1250
0.3125 - 0.75, 0.0625;

0.75 - 1.5, 0.125
0.2015
0.6060
0.0900
0.1650
0.1250
0.375 - 0.75, 0.0625;

0.75 - 1.5, 0.125
0.2185
0.7000
0.1050
0.1850
0.1250
0.5 - 0.75, 0.0625;

0.75 - 1.5, 0.125
0.2365
0.9210
0.1380
0.2040
0.1410
0.5 - 0.75, 0.0625;

0.75 - 1.5, 0.125
60 Flat Countersunk Head Rivet

H
BASIC_DIA
14 - 15
ANSI Inch Small

Solid Rivets
Rivet
Size
Generic part name: ROO

Notes:
RIVET_SIZE
BASIC_DIA
A
Head Dia
H
Head
Height
L
Lengths
0.2005
0.2960
0.0915
0.1875 - 0.75, 0.0625;

0.75 - 1.5, 0.25
5.5
0.2085
0.2960
0.0835
0.1875 - 0.75, 0.0625;

0.75 - 1.75, 0.25
14 - 16
15
ANSI Inch Socket Cap,
Shoulder and Set Screws

decimal value of the nominal diameter of the part. In some cases,
however, the callouts are numbers. Those numbers correspond to
the following values of the nominal diameter:
BASIC_DIA
Nominal Diameter
NO.0000
0.0210
NO.000
0.0340
NO.00
0.0470
NO.0
0.0600
NO.1
0.0730
NO.2
0.0860
NO.3
0.0990
NO.4
0.1120
NO.5
0.1250
NO.6
0.1380
NO.8
0.1640
NO.10
0.1900
NO.12
0.2160
15 - 1
Hex Socket Head Cap Screw
Generic part name: CSDD

Notes:
Corresponds to standard ANSI B18.3-1976
Basic
Dia
A
Head
Diameter
H
Head
Height
S
Side
Height
J
Hex
Size
T
Key
Engagmnt
F
Fillet
Rad
L
Length
NO.0
0.0960
0.0600
0.0540
0.0510
0.0250
0.0020
0.125-0.25,
.0625;
0.25-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
15 - 2
A
Head
Diameter
H
Head
Height
S
Side
Height
J
Hex
Size
T
Key
Engagmnt
F
Fillet
Rad
L
Length
NO.1
0.1180
0.0730
0.0660
0.0635
0.0310
0.0030
0.125-0.25,
.0625;
0.25-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
NO.2
0.1400
0.0860
0.0770
0.0791
0.0380
0.0030
0.125-0.25,
.0625;
0.25-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
NO.3
0.1610
0.0990
0.0890
0.0791
0.0440
0.0040
0.125-0.25,
.0625;
0.25-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
NO.4
0.1830
0.1120
0.1010
0.0952
0.0510
0.0040
0.125-0.25,
.0625;
0.25-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
NO.5
0.2050
0.1250
0.1120
0.0952
0.0570
0.0050
0.125-0.25,
.0625;
0.25-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
NO.6
0.2260
0.1380
0.1240
0.1111
0.0640
0.0050
0.1875-0.25,
.0625;
0.25-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
ANSI Inch Socket Cap, Shoulder and Set Screws
15 - 3
ANSI Inch Socket

Cap, Shoulder and
Basic
Dia
Basic
Dia
A
Head
Diameter
H
Head
Height
S
Side
Height
J
Hex
Size
T
Key
Engagmnt
F
Fillet
Rad
L
Length
NO.8
0.2700
0.1640
0.1480
0.1426
0.0770
0.0060
0.1875-0.25,
.0625;
0.25-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
NO.1
0
0.3120
0.1900
0.1710
0.1587
0.0900
0.0060
0.25-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
.25
0.3750
0.2500
0.2250
0.1900
0.1200
0.0070
0.25-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
.3125
0.4690
0.3125
0.2810
0.2530
0.1510
0.0090
0.375-1.0,
.125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
.375
0.5620
0.3750
0.3370
0.3160
0.1820
0.0120
0.375-1.0,
.125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
.4375
0.6560
0.4375
0.3940
0.3790
0.2130
0.0140
0.5-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
.5
0.7500
0.5000
0.4500
0.3790
0.2450
0.0160
0.5-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
15 - 4
A
Head
Diameter
H
Head
Height
S
Side
Height
J
Hex
Size
T
Key
Engagmnt
F
Fillet
Rad
L
Length
.625
0.9380
0.6250
0.5620
0.5050
0.3070
0.0210
0.625-1.0,
.125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
.75
1.1250
0.7500
0.6750
0.6310
0.3700
0.0250
0.75-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
.875
1.3120
0.8750
0.7870
0.7570
0.4320
0.0310
0.875-1.0,
.125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
1.5000
1.0000
0.9000
0.7570
0.4950
0.0340
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
1.125
1.6880
1.1250
1.0120
0.8850
0.5570
0.0390
1.5-7.0, .5;
7.0-10.0, 1.0;
10.0-14.0, 2.0
1.25
1.8750
1.2500
1.1250
0.8850
0.6200
0.0440
1.5-7.0, .5;
7.0-10.0, 1.0;
10.0-14.0, 2.0
1.375
2.0620
1.3750
1.2370
1.0100
0.6820
0.0480
1.5-7.0, .5;
7.0-10.0, 1.0;
10.0-14.0, 2.0
1.5
2.2500
1.5000
1.3500
1.0100
0.7450
0.0520
1.5-7.0, .5;
7.0-10.0, 1.0;
10.0-14.0, 2.0
1.75
2.6250
1.7500
1.5750
1.2650
0.8700
0.0620
2.0-7.0, .5;
7.0-10.0, 1.0;
10.0-14.0, 2.0
15 - 5
ANSI Inch Socket

Cap, Shoulder and
Basic
Dia
Basic
Dia
A
Head
Diameter
H
Head
Height
S
Side
Height
J
Hex
Size
T
Key
Engagmnt
F
Fillet
Rad
L
Length
3.0000
2.0000
1.8000
1.5150
0.9950
0.0710
2.0-7.0, .5;
7.0-10.0, 1.0;
10.0-14.0, 2.0
2.25
3.3750
2.2500
2.0250
1.7650
1.1200
0.0800
2.5-7.0, .5;
7.0-10.0, 1.0;
10.0-14.0, 2.0
2.5
3.7500
2.5000
2.2500
1.7650
1.2450
0.0880
2.5-7.0, .5;
7.0-10.0, 1.0;
10.0-14.0, 2.0
2.75
4.1250
2.7500
2.4750
2.0150
1.3700
0.0970
3.0-7.0, .5;
7.0-10.0, 1.0;
10.0-14.0, 2.0
4.5000
3.0000
2.7000
2.2650
1.4950
0.1060
3.0-7.0, .5;
7.0-10.0, 1.0;
10.0-14.0, 2.0
3.25
4.8750
3.2500
2.9250
2.2650
1.6200
0.1140
3.5-7.0, .5;
7.0-10.0, 1.0;
10.0-14.0, 2.0
3.5
5.2500
3.5000
3.1500
2.7650
1.7450
0.1240
3.5-7.0, .5;
7.0-10.0, 1.0;
10.0-14.0, 2.0
3.75
5.6250
3.7500
3.3750
2.7650
1.8700
0.1340
4.0-7.0, .5;
7.0-10.0, 1.0;
10.0-14.0, 2.0
6.0000
4.0000
3.6000
3.0150
1.9950
0.1430
4.0-7.0, .5;
7.0-10.0, 1.0;
10.0-14.0, 2.0
15 - 6
Hex Socket Flat Countersunk Head Cap Screw
ANSI Inch Socket

Cap, Shoulder and
Generic part name: CSEE

Notes:
Basic
Dia
A
Head
Diameter
T
Key
Engagmnt
F
Fillet
Rad
J
Hex
Size
L
Length
NO.0
0.1380
0.0250
0.0060
0.0355
0.125-0.25, .0625;
0.25-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
NO.1
0.1680
0.0310
0.0080
0.0510
0.125-0.25, .0625;
0.25-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
15 - 7
Basic
Dia
A
Head
Diameter
T
Key
Engagmnt
F
Fillet
Rad
J
Hex
Size
L
Length
NO.2
0.1970
0.0380
0.0100
0.0510
0.125-0.25, .0625;
0.25-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
NO.3
0.2260
0.0440
0.0100
0.0635
0.125-0.25, .0625;
0.25-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
NO.4
0.2550
0.0550
0.0120
0.0635
0.125-0.25, .0625;
0.25-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
NO.5
0.2810
0.0610
0.0140
0.0791
0.1875-0.25, .0625;
0.25-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
NO.6
0.3070
0.0660
0.0150
0.0791
0.1875-0.25, .0625;
0.25-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
NO.8
0.3590
0.0760
0.0150
0.0952
0.1875-0.25, .0625;
0.25-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
NO.10
0.4110
0.0870
0.0150
0.1270
0.25-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
15 - 8
A
Head
Diameter
T
Key
Engagmnt
F
Fillet
Rad
J
Hex
Size
L
Length
.25
0.5310
0.1110
0.0150
0.1587
0.25-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
.3125
0.6560
0.1350
0.0150
0.1900
0.375-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
.375
0.7810
0.1590
0.0150
0.2217
0.375-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
.4375
0.8440
0.1590
0.0150
0.2530
0.5-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
.5
0.9380
0.1720
0.0150
0.3160
0.5-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
.625
1.1880
0.2200
0.0150
0.3790
0.625-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
.75
1.4380
0.2200
0.0150
0.5050
0.75-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
.875
1.6880
0.2480
0.0150
0.5680
0.875-1.0, .125;
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
1.9380
0.2970
0.0150
0.6310
1.0-3.5, .25;
3.5-7.0, .5;
7.0-10.0, 1.0
15 - 9
ANSI Inch Socket

Cap, Shoulder and
Basic
Dia
Basic
Dia
A
Head
Diameter
T
Key
Engagmnt
F
Fillet
Rad
J
Hex
Size
L
Length
1.125
2.1880
0.3250
0.0310
0.7570
1.5-7.0, .5;
7.0-10.0, 1.0;
10.0-14.0, 2
1.25
2.4380
0.3580
0.0310
0.8850
1.5-7.0, .5;
7.0-10.0, 1.0;
10.0-14.0, 2
1.375
2.6880
0.4020
0.0310
0.8850
1.5-7.0, .5;
7.0-10.0, 1.0;
10.0-14.0, 2
1.5
2.9380
0.4350
0.0310
1.0200
1.5-7.0, .5;
7.0-10.0, 1.0;
10.0-14.0, 2
Hex Socket Button Head Cap Screw
Generic part name: CSFF

Notes:
15 - 10
A
Head
Diameter
H
Head
Height
S
Side
Height
F
Fillet
Rad
T
Key
Engagmnt
J
Hex
Size
L
Length
NO.0
0.1140
0.0320
0.0100
0.0100
0.0200
0.0355
0.125-0.25,
.0625;
0.25-0.5, .125
NO.1
0.1390
0.0390
0.0100
0.0280
0.0510
0.125-0.25,
.0625;
0.25-0.5, .125
0.0100
NO.2
0.1640
0.0460
0.0100
0.0100
0.0280
0.0510
0.125-0.25,
.0625;
0.25-0.5, .125
NO.3
0.1880
0.0520
0.0100
0.0100
0.0350
0.0635
0.125-0.25,
.0625;
0.25-0.5, .125
NO.4
0.2130
0.0590
0.0150
0.0100
0.0350
0.0635
0.125-0.25,
.0625;
0.25-0.5, .125
NO.5
0.2380
0.0660
0.0150
0.0100
0.0440
0.0791
0.125-0.25,
.0625;
0.25-0.5, .125
NO.6
0.2620
0.0730
0.0150
0.0100
0.0440
0.0791
0.1875-0.25,
.0625;
0.25-0.625,
.125
NO.8
0.3120
0.0870
0.0150
0.0150
0.0520
0.0952
0.1875-0.25,
.0625;
0.25-0.75,
.125
NO.10
0.3610
0.1010
0.0200
0.0150
0.0700
0.1270
0.25-1.0, .125
.25
0.4370
0.1320
0.0310
0.0200
0.0870
0.1587
0.25-1.0, .125
.3125
0.5470
0.1660
0.0310
0.0200
0.1050
0.1900
0.375-1.0,
.125
.375
0.6560
0.1990
0.0310
0.0200
0.1220
0.2217
0.375-1.0,
.125;
1.0-1.24, .25
15 - 11
ANSI Inch Socket

Cap, Shoulder and
Basic_
Dia
Basic_
Dia
A
Head
Diameter
H
Head
Height
S
Side
Height
F
Fillet
Rad
T
Key
Engagmnt
J
Hex
Size
L
Length
.5
0.8750
0.2650
0.0460
0.0300
0.1750
0.3160
0.5-1.0, .125;
1.0-2.0, .25
.625
1.0000
0.3310
0.0620
0.0300
0.2100
0.3790
0.625-1.0,
.125;
1.0-2.0, .25
Hex Socket Set Screw, Flat Point
Generic part name: SSYA

Notes:
BASIC_
DIA
J
Hex
Size
C
Point
Diameter
T
Key
Engagmnt
L
Length
NO.0
0.0285
0.0330
0.0500
0.125-0.25, .06Z25;
0.25-0.625, .125
15 - 12
J
Hex
Size
C
Point
Diameter
T
Key
Engagmnt
L
Length
NO.1
0.0355
0.0400
0.0600
0.125-0.25, .0625;
0.25-0.75, .125
NO.2
0.0355
0.0470
0.0600
0.125-0.25, .0625;
0.25-0.75, .125
NO.3
0.0510
0.0540
0.0700
0.125-0.25, .0625;
0.25-0.75, .125
NO.4
0.0510
0.0610
0.0700
0.125-1.25, .125
NO.5
0.0635
0.0670
0.0800
0.125-1.25, .125
NO.6
0.0635
0.0740
0.0800
0.125-1.50, .125
NO.8
0.0780
0.0870
0.0900
0.25-1.0, .125;
1.0-1.75, .25
NO.10
0.0952
0.1020
0.1000
0.25-1.0, .125;
1.0-2.0, .25
.25
0.1270
0.1320
0.1250
0.25-1.0, .125;
1.0-2.5, .25
.3125
0.1587
0.1720
0.1560
0.375-1.0, .125;
1.0-3.0, .25
.375
0.1900
0.2120
0.1880
0.375-1.0, .125;
1.0-3.0, .25
.4375
0.2217
0.2520
0.2190
0.5-1.0, .125;
1.0-3.5, .25
.5
0.2530
0.2910
0.2500
0.5-1.0, .125;
1.0-4.0, .25
.625
0.3160
0.3710
0.3120
0.75-2.0, .25;
2.0-6.0, .5
.75
0.3790
0.4500
0.3750
0.75-2.0, .25;
2.0-7.0, .5
.875
0.5050
0.5300
0.5000
1.0-2.0, .25;
2.0-3.0, .5
0.5680
0.6090
0.5620
1.25-2.0, .25;
2.0-8.0, .5
1.125
0.5680
0.6890
0.5620
1.5-10.0, .5
1.25
0.6310
0.7670
0.6250
1.5-10.0, .5
15 - 13
ANSI Inch Socket

Cap, Shoulder and
BASIC_
DIA
BASIC_
DIA
J
Hex
Size
C
Point
Diameter
T
Key
Engagmnt
L
Length
1.375
0.6310
0.8480
0.6250
2.0-10.0, .5
1.5
0.7570
0.9260
0.7500
2.0-6.0, .5;
6.0-12.0, 1.0
1.74
1.0100
1.0680
1.0000
2.0-6.0, .5;
6.0-12.0, 1.0
1.0100
1.2440
1.0000
2.0-6.0, .5;
6.0-12.0, 1.0
Hex Socket Set Screw, Oval Point
Generic part name: SSYB

Notes:
15 - 14
T
Key
Engagmnt
J
Hex
Size
R
Point
Radius
L
Length
NO.0
0.0500
0.0285
0.0450
0.125-0.25, .0625;
0.25-0.625, .125
NO.1
0.0355
0.0600
0.0550
0.125-0.25, .0625;
0.25-0.75, .125
NO.2
0.0355
0.0600
0.0640
0.125-0.25, .0625;
0.25-1.0, .125
NO.3
0.0510
0.0700
0.0740
0.125-0.25, .0625;
0.25-1.25, .125
NO.4
0.0510
0.0700
0.0840
0.125-1.25, .125
NO.5
0.0635
0.0800
0.0940
0.125-1.25, .125
NO.6
0.0635
0.0800
0.1040
0.125-1.50, .125
NO.8
0.0780
0.0900
0.1230
0.25-1.0, .125;
1.0-1.75, .25
NO.10
0.0952
0.1000
0.1420
0.25-1.0, .125;
1.0-2.0, .25
.25
0.1270
0.1250
0.1880
0.25-1.0, .125;
1.0-2.5, .25
.3125
0.1587
0.1560
0.2340
0.375-1.0, .125;
1.0-3.0, .25
.375
0.1900
0.1880
0.2810
0.375-1.0, .125;
1.0-3.0, .25
.4375
0.2217
0.2190
0.3280
0.375-1.0, .125;
1.0-3.5, .25
.5
0.2530
0.2500
0.3750
0.5-1.0, .125;
1.0-4.0, .25
.625
0.3160
0.3120
0.4690
0.75-2.0, .25;
2.0-6.0, .5
.75
0.3790
0.3750
0.5620
0.75-2.0, .25;
2.0-7.0, .5
.875
0.5050
0.5000
0.6560
1.0-2.0, .25;
2.0-3.0, .5
ANSI Inch Socket

Cap, Shoulder and
BASIC_
DIA
15 - 15
BASIC_
DIA
T
Key
Engagmnt
J
Hex
Size
R
Point
Radius
L
Length
0.5680
0.5620
0.7500
1.25-2.0, .25;
2.0-8.0, .5
1.125
0.5680
0.5620
0.8440
1.5-10.0, .5
1.25
0.6310
0.6250
0.9380
1.5-10.0, .5
1.375
0.6310
0.6250
1.0310
2.0-10.0, .5
1.5
0.7570
0.7500
1.1250
2.0-6.0, .5;
6.0-12.0, 1.0
1.75
1.0100
1.0000
1.3120
2.0-6.0, .5;
6.0-12.0, 1.0
1.0100
1.0000
1.5000
2.0-6.0, .5;
6.0-12.0, 1.0
Hex Socket Set Screw, Half Dog Point
Generic part name: SSYC

Notes:
15 - 16
J
Hex
Size
T
Key
Engagmnt
P
Point
Diameter
Q
Point
Length
L
Length
NO.0
0.0285
0.0500
0.0400
0.0170
0.125-0.25, .0625;
0.25-0.625, .125
NO.1
0.0355
0.0600
0.0490
0.0210
0.125-0.25, .0625;
0.25-0.75, .125
NO.2
0.0355
0.0600
0.0570
0.0240
0.125-0.25, .0625;
0.25-1.0, .125
NO.3
0.0510
0.0700
0.0660
0.0270
0.125-0.25, .0625;
0.25-1.25, .125
NO.4
0.0510
0.0700
0.0750
0.0300
0.125-1.25, .125
NO.5
0.0635
0.0800
0.0830
0.0330
0.125-1.25, .125
NO.6
0.0635
0.0800
0.0920
0.0380
0.125-1.50, .125
NO.8
0.0780
0.0900
0.1090
0.0430
0.25-1.0, .125;
1.0-1.75, .25
NO.10
0.0952
0.1000
0.1270
0.0490
0.25-1.0, .125;
1.0-2.0, .25
.25
0.1270
0.1250
0.1560
0.0670
0.25-1.0, .125;
1.0-2.5, .25
.3125
0.1587
0.1560
0.2030
0.0820
0.375-1.0, .125;
1.0-3.0, .25
.375
0.1900
0.1880
0.2500
0.0990
0.375-1.0, .125;
1.0-3.0, .25
.4375
0.2217
0.2190
0.2970
0.1140
0.5-1.0, .125;
1.0-3.5, .25
.5
0.2530
0.2500
0.3440
0.1300
0.5-1.0, .125;
1.0-4.0, .25
.625
0.3160
0.3120
0.4690
0.1640
0.75-2.0, .25;
2.0-6.0, .5
.75
0.3790
0.3750
0.5620
0.1960
0.75-2.0, .25;
2.0-7.0, .5
.875
0.5050
0.5000
0.6560
0.2270
1.0-2.0, .25;
2.0-8.0, .5
15 - 17
ANSI Inch Socket

Cap, Shoulder and
BASIC_
DIA
BASIC_
DIA
J
Hex
Size
T
Key
Engagmnt
P
Point
Diameter
Q
Point
Length
L
Length
0.5680
0.5620
0.7500
0.2600
1.25-2.0, .25;
2.0-8.0, .5
1.125
0.5680
0.5620
0.8440
0.2910
1.5-10.0, .5
1.25
0.6310
0.6250
0.9380
0.3230
1.5-10.0, .5
1.375
0.6310
0.6250
1.0310
0.3540
2.0-10.0, .5
1.5
0.7570
0.7500
1.1250
0.3850
2.0-6.0, .5;
6.0-12.0, 1.0
1.75
1.0100
1.0000
1.3120
0.4480
2.0-6.0, .5;
6.0-12.0, 1.0
1.0100
1.0000
1.5000
0.5100
2.0-6.0, .5;
6.0-12.0, 1.0
Hex Socket Set Screw, Conic Point
Generic part name: SSYD

Notes:
15 - 18

J
Hex
Size
T
Key
Engagement
L
Length
NO.0
0.0285
0.0500
0.125-0.25, .0625;
0.25-0.625, .125
NO.1
0.0355
0.0400
0.125-0.25, .0625;
0.25-0.75, .125
NO.2
0.0355
0.0470
0.125-0.25, .0625;
0.25-1.0, .125
NO.3
0.0510
0.0540
0.125-0.25, .0625;
0.25-1.25, .125
NO.4
0.0510
0.0610
0.125-1.25, .125
NO.5
0.0635
0.0670
0.125-1.25, .125
NO.6
0.0635
0.0740
0.125-1.50, .125
NO.8
0.0780
0.0870
0.25-1.0, .125;
1.0-1.75, .25
NO.10
0.0952
0.1020
0.25-1.0, .125;
1.0-2.0, .25
.25
0.1270
0.1320
0.25-1.0, .125;
1.0-2.5, .25
.3125
0.1587
0.1720
0.375-1.0, .125;
1.0-3.0, .25
.375
0.1900
0.2120
0.375-1.0, .125;
1.0-3.0, .25
.4375
0.2217
0.2520
0.5-1.0, .125;
1.0-3.5, .25
.5
0.2530
0.2910
0.5-1.0, .125;
1.0-4.0, .25
.625
0.3160
0.3710
0.75-2.0, .25;
2.0-6.0, .5
.75
0.3790
0.4500
0.75-2.0, .25;
2.0-7.0, .5
.875
0.5050
0.5300
1.0-2.0, .25;
2.0-8.0, .5
ANSI Inch Socket

Cap, Shoulder and
BASIC_DIA
15 - 19
BASIC_DIA
J
Hex
Size
T
Key
Engagement
L
Length
0.5680
0.6090
1.25-2.0, .25;
2.0-8.0, .5
1.125
0.5680
0.6890
1.5-10.0, .5
1.25
0.6310
0.7670
1.5-10.0, .5
1.375
0.6310
0.8480
2.0-10.0, .5
1.5
0.7570
0.9260
2.0-6.0, .5;
6.0-12.0, 1.0
1.75
1.0100
1.0680
2.0-6.0, .5;
6.0-12.0, 1.0
1.0100
1.2440
2.0-6.0, .5;
6.0-12.0, 1.0
Hex Socket Set Screw, Cup Point
Generic part name: SSYE

Notes:
15 - 20
J
Hex
Size
C
Point
Diameter
T
Key
Engagmnt
L
Length
NO.0
0.0285
0.0330
0.0500
0.125-0.25, .0625;
0.25-0.625, .125
NO.1
0.0355
0.0400
0.0600
0.125-0.25, .0625;
0.25-0.75, .125
NO.2
0.0355
0.0470
0.0600
0.125-0.25, .0625;
0.25-1.0, .125
NO.3
0.0510
0.0540
0.0700
0.125-0.25, .0625;
0.25-1.25, .125
NO.4
0.0510
0.0610
0.0700
0.125-1.25, .125
NO.5
0.0635
0.0670
0.0800
0.125-1.25, .125
NO.6
0.0635
0.0740
0.0800
0.125-1.50, .125
NO.8
0.0780
0.0870
0.0900
0.25-1.0, .125;
1.0-1.75, .25
NO.10
0.0952
0.1020
0.1000
0.25-1.0, .125;
1.0-2.0, .25
.25
0.1270
0.1320
0.1250
0.25-1.0, .125;
1.0-2.5, .25
.3125
0.1587
0.1720
0.1560
0.375-1.0, .125;
1.0-3.0, .25
.375
0.1900
0.2120
0.1880
0.375-1.0, .125;
1.0-3.0, .25
.4375
0.2217
0.2520
0.2190
0.5-1.0, .125;
1.0-3.5, .25
.5
0.2530
0.2910
0.2500
0.5-1.0, .125;
1.0-4.0, .25
.625
0.3160
0.3710
0.3120
0.75-2.0, .25;
2.0-6.0, .5
.75
0.3790
0.4500
0.3750
0.75-2.0, .25;
2.0-7.0, .5
.875
0.5050
0.5300
0.5000
1.0-2.0, .25;
2.0-8.0, .5
15 - 21
ANSI Inch Socket

Cap, Shoulder and
BASIC_
DIA
BASIC_
DIA
J
Hex
Size
C
Point
Diameter
T
Key
Engagmnt
L
Length
0.5680
0.6090
0.5620
1.25-2.0, .25;
2.0-8.0, .5
1.125
0.5680
0.6890
0.5620
1.5-10.0, .5
1.25
0.6310
0.7670
0.6250
1.5-10.0, .5
1.375
0.6310
0.8480
0.6250
2.0-10.0, .5
1.5
0.7570
0.9260
0.7500
2.0-6.0, .5;
6.0-12.0, 1.0
1.75
1.0100
1.0680
1.0000
2.0-6.0, .5;
6.0-12.0, 1.0
1.0100
1.2440
1.0000
2.0-6.0, .5;
6.0-12.0, 1.0
Hex Socket Head Shoulder Screws
Generic part name: CSSD

Notes:
15 - 22
CSSD, Part 1
Nom.
Size
shoulder
dia
Nom
Thread
Size
GENERIC
1/4
0.24800
0.37500
0.18800
0.15700
0.12500
0.08700
10-24
CSSD01
1/4
0.24800
0.37500
0.18800
0.15700
0.12500
0.08700
10-24
CSSD02
5/16
0.31050
0.43750
0.21900
0.18300
0.15625
0.11100
1/4-20
CSSD03
3/8
0.37300
0.56250
0.25000
0.20900
0.18750
0.13500
5/16-18
CSSD04
1/2
0.49800
0.75000
0.31250
0.26200
0.25000
0.15900
3/8-16
CSSD05
5/8
0.62300
0.87500
0.37500
0.31500
0.31250
0.17200
1/2-13
CSSD06
3/4
0.74800
1.00000
0.50000
0.42100
0.37500
0.22000
5/8-11
CSSD07
0.99800
1.31250
0.62500
0.52700
0.50000
0.22000
3/4-10
CSSD08
1-1/4
1.24800
1.75000
0.75000
0.63300
0.62500
0.29700
7/8-9
CSSD09
1-1/2
1.49800
2.12500
1.00000
0.84200
0.87500
0.35800
1-1/8-7
CSSD10
1-3/4
1.74800
2.37500
1.12500
0.94800
1.00000
0.43500
1-1/4-7
CSSD11
1.99800
2.75000
1.25000
1.05400
1.25000
0.43500
1-1/2-6
CCSD, Part 2
Name
thread
dia
thr
neck
dia
GENERIC
0.19000
0.37500
0.14200
0.08300
0.22700
0.09300
0.02300
0.01400
CSSD01
0.19000
0.37500
0.14200
0.08300
0.22700
0.09300
0.02300
0.01400
CSSD02
0.25000
0.43800
0.19300
0.10000
0.28900
0.09300
0.02800
0.01700
CSSD03
0.31250
0.50000
0.24900
0.11100
0.35200
0.09300
0.03100
0.02000
CSSD04
0.37500
0.62500
0.30400
0.12500
0.47700
0.09300
0.03500
0.02600
CSSD05
0.50000
0.75000
0.41400
0.15400
0.60200
0.09300
0.04200
0.03200
CSSD06
0.62500
0.87500
0.52100
0.18200
0.72700
0.09300
0.05100
0.03900
CSSD07
0.75000
1.00000
0.63800
0.20000
0.97700
0.12500
0.05500
0.05000
CSSD08
0.87500
1.12500
0.75000
0.22200
1.22700
0.12500
0.06200
0.06000
CSSD09
1.12500
1.50000
0.96400
0.28600
1.47800
0.12500
0.07200
0.07000
CSSD10
1.25000
1.75000
1.08900
0.28600
1.72800
0.12500
0.07200
0.08000
CSSD11
1.50000
2.00000
1.30700
0.33300
1.97800
0.12500
0.10200
0.09000
CCSD, Part 3
Name
Lengths
CSSD01
0.25-1.25, 0.125; 1.25-2.00, 0.25
15 - 23
ANSI Inch Socket

Cap, Shoulder and
Name
Name
Lengths
CSSD02
0.25-1.0, 0.125; 1.0-2.0, 0.25
CSSD03
0.25-1.25, 0.125; 1.25-4.0, 0.25
CSSD04
0.5-1.5, 0.125; 1.5-5.0, 0.25
CSSD05
1.0-5.0, 0.25
CSSD06
1.5-5.0, 0.25
CSSD07
1.5-5.0, 0.25
CSSD08
2.0-5.0, 0.25
CSSD09
2.0-5.5, 0.25
CSSD10
2.0-5.5, 0.25
CSSD11
2.0-6.0, 0.25
15 - 24
16
ANSI Inch Square and Hex
Bolts and Screws
Heavy Hex Structural Bolt

H
R
E
BASIC_DIA
LT
Generic part name: SHB

Notes:
16 - 1
BASIC
_DIA
E
Body
Dia
F
Width
Across
Flats
H
Height
WASH
Washer
Face
Thickness
R
Round
Radius
LT
Thread
Length
L
Lengths
.5
0.5150
0.8750
0.3125
0.0200
0.0310
1.0000
1.25 - 8, 0.25;
8 - 15, 0.5
.625
0.6420
1.0620
0.3910
0.0200
0.0620
1.2500
1.5 - 8, 0.25;
8 - 18.5, 0.5
.75
0.7680
1.2500
0.4690
0.0200
0.0620
1.3800
1.5 - 8, 0.25;
8 - 22.5, 0.5
.875
0.8950
1.4380
0.5470
0.0250
0.0620
1.5000
1.75 - 8, 0.25;
8 - 24, 0.5
1.0220
1.6250
0.6090
0.0250
0.0620
1.7500
2 - 8, 0.25
8 - 24, 0.5
1.125
1.1490
1.8120
0.6880
0.0250
0.0620
2.0000
2.25 - 8, 0.25;
8 - 24, 0.5
1.25
1.2770
2.0000
0.7810
0.0250
0.0620
2.0000
2.25 - 8, 0.25;
8 - 24, 0.5
1.375
1.4040
2.1880
0.8440
0.0250
0.0620
2.2500
2.5 - 8, 0.25;
8 - 24, 0.5
1.5
1.5310
2.3750
0.9380
0.0250
0.0620
2.2500
2.5 - 8, 0.25;
8 - 24, 0.5
16 - 2
Square Bolt
H
E
BASIC_DIA
LT
ANSI Inch Square

and Hex Bolts and
Generic part name: SQB

Notes:
BASIC_DIA
F
Width
Across
Flats
H
Height
E
Body
Dia
L
Lengths
.25
0.3750
0.1720
0.2600
1.0 - 5.0, 0.25
.3125
0.5000
0.2030
0.3240
1.25 - 5.0, 0.25;

5.0 - 9.0, 0.5
.375
0.5620
0.2500
0.3880
1.25 - 5.0, 0.25;

5.0 - 11.0, 0.5
.4375
0.6250
0.2970
0.4520
1.5 - 5.0, 0.25;

5.0 - 12.0, 0.5;
12.0 - 13.0, 1
.5
0.7500
0.3280
0.5150
1.5 - 5.0, 0.25;

5.0 - 12.0, 0.5;
12.0 - 15.0, 1
.625
0.9380
0.4220
0.6420
1.75 - 5.0, 0.25;

5.0 - 12.0, 0.5;
12.0 - 18.0, 1
ANSI Inch Square and Hex Bolts and Screws
16 - 3
BASIC_DIA
F
Width
Across
Flats
H
Height
E
Body
Dia
L
Lengths
.75
1.1250
0.5000
0.7680
2.0 - 5.0, 0.25;

5.0 - 12.0, 0.5;
12.0 - 22.0, 1
.875
1.3120
0.5940
0.8950
2.25 - 5.5, 0.25;

5.0 - 12.0, 0.5;
12.0 - 24.0, 1
1.5000
0.6560
1.0220
2.5 - 5.0, 0.25;

5.0 - 12.0, 0.5;
12.0 - 24.0, 1
1.125
1.6880
0.7500
1.1490
2.75 - 5.0, 0.25;

5.0 - 12.0, 0.5;
12.0 - 24.0, 1
1.25
1.8750
0.8440
1.2770
3.0 - 5.0, 0.25;

5.0 - 12.0, 0.5;
12.0 - 24.0, 1
1.375
2.0620
0.9060
1.4040
3.25 - 5.0, 0.25;

5.0 - 12.0, 0.5;
12.0 - 24.0, 1
1.5
2.2500
1.0000
1.5310
3.5 - 5.0, 0.25;

5.0 - 12.0, 0.5;
12.0 - 24.0, 1
Hex Bolt
16 - 4
Generic part name: RHB

Notes:
E
Body
Dia
F
Width
Across
Flats
H
Height
R
Round
Radius
L
Lengths
.25
0.2600
0.4380
0.1720
0.0300
1 - 7.25, 0.25
.3125
0.3400
0.5000
0.2190
0.0300
1.25 - 8, 0.25;
8 - 9, 0.5
.375
0.3880
0.5620
0.2500
0.0300
1.25 - 8, 0.25;
8 - 11, 0.5
.4375
0.4520
0.6250
0.2970
0.0300
1.5 - 8, 0.25;
8 - 13, 0.5
.5
0.5150
0.7500
0.3440
0.0300
1.5 - 8, 0.25;
8 - 15, 0.5
.625
0.6400
0.9280
0.4220
0.0600
1.75 - 8, 0.25;
8 - 18, 0.5
.75
0.6800
1.1250
0.5000
0.0600
2 - 8, 0.25;
8 - 20, 0.5;
20 - 22, 1
.875
0.8950
1.3120
0.5780
0.0600
2.25 - 8, 0.25;
8 - 20, 0.5;
20 - 24, 1
1.0220
1.5000
0.6720
0.0900
2.5 - 8, 0.25;
8 - 20, 0.5;
20 - 24, 1
1.125
1.1490
1.6880
0.7500
0.0900
2.75 - 8, 0.25;
8 - 20, 0.5;
20 - 24, 1
1.25
1.2770
1.8750
0.8440
0.0900
3 - 8, 0.25;
8 - 20, 0.5;
20 - 24, 1
ANSI Inch Square

and Hex Bolts and
BASIC_
DIA
16 - 5
16 - 6
BASIC_
DIA
E
Body
Dia
F
Width
Across
Flats
H
Height
R
Round
Radius
L
Lengths
1.375
1.4040
2.0620
0.9060
0.0900
3.25 - 8, 0.25;
8 - 20, 0.5;
20 - 24, 1
1.5
1.5310
2.2500
1.0000
0.0900
3.5 - 8, 0.25;
8 - 20, 0.5;
20 - 24, 1
1.75
1.7850
2.6250
1.1560
0.1200
4 - 8, 0.25;
8 - 20, 0.5;
20 - 24, 1
2.0390
3.0000
1.3440
0.1200
4.5 - 8, 0.25;
8 - 20, 0.5;
20 - 24, 1
2.25
2.3050
3.3750
1.5000
0.1900
5 - 8, 0.25;
8 - 20, 0.5;
20 - 24, 1
2.5
2.5590
3.7500
1.6560
0.1900
5.5 - 8, 0.25;
8 - 20, 0.5;
20 - 24, 1
2.75
2.8270
4.1250
1.8130
0.1900
6 - 8, 0.25
8 - 20, 0.5
20 - 24, 1
3.0810
4.5000
2.0000
0.1900
6.75 - 8, 0.25
8 - 20, 0.5
20 - 24, 1
3.25
3.3350
4.8750
2.1880
0.1900
7.25 - 8, 0.25
8 - 20, 0.5
20 - 24, 1
3.5
3.5890
5.2500
2.3130
0.1900
7.75 - 8, 0.25
8 - 20, 0.5
20 - 24, 1
3.75
3.8580
5.6250
2.5000
0.1900
8.5 - 20, 0.5

20 - 24, 1
4.1110
6.0000
2.6880
0.1900
9 - 20, 0.5
20 - 24, 1
Heavy Hex Bolt
ANSI Inch Square

and Hex Bolts and
Generic part name: HHB

Notes:
BASIC_DIA
E
Body
Dia
F
Width
Across
Flats
H
Height
L
Lengths
.5
0.5150
0.8750
0.3440
1.5 - 8.0, 0.25;

8.0 - 15.0, 0.5
.625
0.6420
1.0620
0.4220
1.75 - 8.0, 0.25;

8.0 - 18.5, 0.5
.875
0.8950
1.4380
0.5780
2.25 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 22.0, 1
1.0020
1.6250
0.6720
2.5 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 22.0, 1
1.125
1.1490
1.8120
0.7500
2.75 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 22.0, 1
1.25
1.2770
2.0000
0.8440
3.0 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 22.0, 1
16 - 7
16 - 8
BASIC_DIA
E
Body
Dia
F
Width
Across
Flats
H
Height
L
Lengths
1.375
1.4040
2.1880
0.9060
3.25 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 23.0, 1
1.5
1.5310
2.3750
1.0000
3.5 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 24.0, 1
1.75
1.7850
2.7500
1.1560
4.0 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 24.0, 1
2.0390
3.1250
1.3440
4.5 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 24.0, 1
2.25
2.3050
3.5000
1.5000
5.0 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 24.0, 1
2.5
2.5590
3.8750
1.6560
5.25 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 24.0, 1
2.75
2.8270
4.2500
1.8130
6.25 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 24.0, 1
3.0810
4.6250
2.0000
6.75 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 24.0, 1
Hex Cap Screw (Finished Hex Bolt)

H
R
E
BASIC_DIA
ANSI Inch Square

and Hex Bolts and
LT
Generic part name: HCS

Notes:
BASIC_
DIA
F
Width
Across
Flats
H
Height
WASH
Washer
Face
Thickness
E
Body
Dia
L
Lengths
.25
0.4380
0.1560
0.0200
0.2500
1.0 - 7.0, 0.25
.3125
0.5000
0.2030 *
0.3125
0.2500
1.25 - 8.0, 0.25;

8.0 - 9.0, 0.5
.375
0.5620
0.2340 *
0.3750
0.2500
1.25 - 8.0, 0.25;

8.0 - 11.0, 0.5
.4375
0.6250
0.2810 *
0.4375
0.2500
1.5 - 8.0, 0.25;

8.0 - 13.0, 0.5
.5
0.7500
0.3130 *
0.5000
0.2500
1.5 - 8.0, 0.25;

8.0 - 15.0, 0.5
.5625
0.8120
0.3590
0.0250
0.5625
1.75 - 8.0, 0.25;

8.0 - 16.5, 0.5
16 - 9
BASIC_
DIA
F
Width
Across
Flats
H
Height
WASH
Washer
Face
Thickness
E
Body
Dia
L
Lengths
.625
0.9380
0.3910
0.0250
0.6250
1.75 - 8.0, 0.25;

8.0 - 18.5, 0.5
.75
1.1250
0.4690
0.0250
0.7500
2.0 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 22.0, 1
.875
1.3120
0.5470
0.0250
0.8750
2.25 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 24.0, 1
1.5000
0.6090
0.0250
1.0000
2.5 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 24.0, 1
1.125
1.6880
0.6880
0.0250
1.1250
2.75 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 24.0, 1
1.25
1.8750
0.7810
0.0250
1.2500
3.0 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 24.0, 1
1.375
2.0620
0.8440
0.0250
1.3750
3.25 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 24.0, 1
1.5
2.2300
1.3130
0.0250
1.5000
3.5 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 24.0, 1
1.75
2.6520
1.0940
0.0250
1.7500
4.0 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 24.0, 1
3.0000
1.2190
0.0250
2.0000
4.5 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 24.0, 1
2.25
3.3750
1.3750
0.0250
2.2500
5.0 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 24.0, 1
2.5
3.7500
1.5310
0.0250
2.5000
5.5 - 8.0, 0.25

8.0 - 20.0, 0.5
20.0 - 24.0, 1
16 - 10
BASIC_
DIA
F
Width
Across
Flats
H
Height
WASH
Washer
Face
Thickness
E
Body
Dia
L
Lengths
2.75
4.1250
1.6880
0.0250
2.7500
6.25 - 8.0, 0.25

8.0 - 20.0, 0.5
20.0 - 24.0, 1
4.5000
1.8750
0.0250
3.0000
6.75 - 8.0, 0.25

8.0 - 20.0, 0.5
20.0 - 24.0, 1
ANSI Inch Square
and Hex Bolts and
Heavy Hex Screw

H
R
E
BASIC_DIA
LT
Generic part name: HHS

Notes:
16 - 11
BASIC_
DIA
F
Width
Across
Flats
H
Height
WASH
Washer
Face
Thickness
E
Body
Dia
L
Lengths
.5
0.8750
0.3130
0.0200
0.5000
1.5 - 8.0, 0.25;

8.0 - 15.0, 0.5
.625
1.0620
0.3910
0.0200
0.6250
1.75 - 8.0, 0.25;

8.0 - 18.5, 0.5
.75
1.2500
0.4690
0.0200
0.7500
2.0 - 8.0, 0.25;

8.0 - 22.0, 0.5
.875
1.4380
0.5470
0.0250
0.8750
2.25 - 8.0, 0.25;

8.0 - 24.0, 0.5
1.6250
0.6090
0.0250
1.0000
2.5 - 8.0, 0.25;

8.0 - 19.0, 0.5;
19.0 - 24.0, 1
1.125
1.8120
0.6880
0.0250
1.1250
2.75 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 24.0, 1
1.25
2.0000
0.7810
0.0250
1.2500
3.0 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 24.0, 1
1.375
2.1880
0.8440
0.0250
1.3750
3.25 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 24.0, 1
1.5
2.3750
0.9380
0.0250
1.5000
3.5 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 24.0, 1
1.75
2.7500
1.0940
0.0250
1.7500
4.0 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 24.0, 1
3.1250
1.2190
0.0250
2.0000
4.5 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 24.0, 1
2.25
3.5000
1.3750
0.0250
2.2500
5.0 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 24.0, 1
16 - 12
F
Width
Across
Flats
H
Height
WASH
Washer
Face
Thickness
E
Body
Dia
L
Lengths
2.5
3.8750
1.5310
0.0250
2.5000
5.5 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 24.0, 1
2.75
4.2500
1.6850
0.0250
2.7500
6.25 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 24.0, 1
4.6250
1.8750
0.0250
3.0000
6.75 - 8.0, 0.25;

8.0 - 20.0, 0.5;
20.0 - 24.0, 1
16 - 13
ANSI Inch Square

and Hex Bolts and
BASIC_
DIA
16 - 14
17
ANSI Inch Square and Hex
Nuts
17 - 1
Hex Nut
Generic Part Name: RHN

Notes:
Corresponds to standard ASME/ANSI B18.2.2-1987.
Washer Faced Bearing Surface
17 - 2
BASIC_DIA
F
Flat
Width
H
Thickness
.25
0.4380
0.2190
.75
1.1250
0.6410
.875
1.3120
0.7500
1.5000
0.8590
1.125
1.6880
0.9690
1.25
1.8750
1.0630
1.375
2.0620
1.1720
1.5
2.2500
1.2810
Double Chamfered
F
Flat
Width
H
Thickness
.25
0.4380
0.2190
.3125
0.5000
0.2660
.375
0.5620
0.3280
.4375
0.6880
0.3750
.5
0.7500
0.4380
.5625
0.8750
0.4840
.625
0.9380
0.5470
.75
1.1250
0.6410
.875
1.3120
0.7500
1.5000
0.8590
1.125
1.6880
0.9690
1.25
1.8750
1.0630
1.375
2.0620
1.1720
1.5
2.2500
1.2810
ANSI Inch Square

and Hex Nuts
BASIC_DIA
Hex Jam Nut
ANSI Inch Square and Hex Nuts
17 - 3
Generic part name: HJN

Notes:

BASIC_DIA
F
Flat
Width
H
Thickness
.25
0.4380
0.1560
.75
1.1250
0.4220
.875
1.3120
0.4840
1.5000
0.5470
1.125
1.6880
0.6090
1.25
1.8750
0.7190
1.375
2.0620
0.7810
1.5
2.2500
0.8440
Double Chamfered
17 - 4
BASIC_DIA
F
Flat
Width
H
Thickness
.25
0.4380
0.1560
.3125
0.5000
0.1880
.375
0.5620
0.2190
.4375
0.6880
0.2500
.5
0.7500
0.3130
.5625
0.8750
0.3130
.625
0.9380
0.3750
.75
1.1250
0.4220
.875
1.3120
0.4840
1.5000
0.5470
Double Chamfered
BASIC_DIA
F
Flat
Width
H
Thickness
1.125
1.6880
0.6090
1.25
1.8750
0.7190
1.375
2.0620
0.7810
1.5
2.2500
0.8440
Heavy Hex Nut
ANSI Inch Square

and Hex Nuts
Generic Name: HHN

Notes:

BASIC_DIA
F
Flat
Width
H
Thickness
.25
0.5000
0.2340
.5
0.8750
0.4840
.5625
0.9380
0.5470
17 - 5

BASIC_DIA
F
Flat
Width
H
Thickness
.625
1.0620
0.6090
.75
1.2500
0.7340
.875
1.4380
0.8590
1.6250
0.9840
1.125
1.8120
1.1090
1.25
2.0000
1.2190
1.375
2.1880
1.3430
1.5
2.3750
1.4690
1.625
2.5620
1.5940
1.75
2.7500
1.7190
1.875
2.9380
1.8440
3.1250
1.9690
2.25
3.5000
2.2030
2.5
3.8750
2.4530
2.75
4.2500
2.7030
4.6250
2.9530
3.25
5.0000
3.1880
3.5
5.3750
3.4380
3.75
5.7500
3.6880
6.1250
3.9380
Double Chamfered
17 - 6
BASIC_DIA
F
Flat
Width
H
Thickness
.25
0.5000
0.2340
.3125
0.5620
0.2970
.375
0.6880
0.3590
.4375
0.7500
0.4220
Double Chamfered
F
Flat
Width
H
Thickness
.5
0.8750
0.4840
.5625
0.9380
0.5470
.625
1.0620
0.6090
.75
1.2500
0.7340
.875
1.4380
0.8590
1.6250
0.9840
1.125
1.8120
1.1090
1.25
2.0000
1.2190
1.375
2.1880
1.3430
1.5
2.3750
1.4690
1.625
2.5620
1.5940
1.75
2.7500
1.7190
1.875
2.9380
1.8440
3.1250
1.9690
2.25
3.5000
2.2030
2.5
3.8750
2.4530
2.75
4.2500
2.7030
4.6250
2.9530
3.25
5.0000
3.1880
3.5
5.3750
3.4380
3.75
5.7500
3.6880
6.1250
3.9380
ANSI Inch Square

and Hex Nuts
BASIC_DIA
17 - 7
Heavy Hex Jam Nut
Generic Name: HHJN

Notes:
17 - 8
BASIC_DIA
F
Flat
Width
H
Thickness
.25
0.5000
0.1720
.5
0.8750
0.2970
.5625
0.9380
0.3280
.625
1.0620
0.3590
.75
1.2500
0.4210
.875
1.4380
0.4840
1.6250
0.5470
1.125
1.8120
0.6090
1.25
2.0000
0.7190
1.375
2.1880
0.7810
1.5
2.3750
0.8440
1.625
2.5620
0.9060

F
Flat
Width
H
Thickness
1.75
2.7500
0.9690
1.875
2.9380
1.0310
3.1250
1.0940
2.25
3.5000
1.2030
2.5
3.8750
1.4530
2.75
4.2500
1.5780
4.6250
1.7030
3.25
5.0000
1.8130
3.5
5.3750
1.9380
3.75
5.7500
2.0630
6.1250
2.1880
ANSI Inch Square

and Hex Nuts
BASIC_DIA
Double Chamfered
BASIC_DIA
F
Flat
Width
H
Thickness
.25
0.5000
0.1720
.3125
0.5620
0.2030
.375
0.6880
0.2340
.4375
0.7500
0.2660
.5
0.8750
0.2970
.5625
0.9380
0.3280
.625
1.0620
0.3590
.75
1.2500
0.4210
.875
1.4380
0.4840
1.6250
0.5470
1.125
1.8120
0.6090
1.25
2.0000
0.7190
1.375
2.1880
0.7810
17 - 9
Double Chamfered
BASIC_DIA
F
Flat
Width
H
Thickness
1.5
2.3750
0.8440
1.625
2.5620
0.9060
1.75
2.7500
0.9690
1.875
2.9380
1.0310
3.1250
1.0940
2.25
3.5000
1.2030
2.5
3.8750
1.4530
2.75
4.2500
1.5780
4.6250
1.7030
3.25
5.0000
1.8130
3.5
5.3750
1.9380
3.75
5.7500
2.0630
6.1250
2.1880
Hex Flat Nut
17 - 10
Generic part name: HFN

Notes:
BASIC_DIA
F
Flat
Width
H
Thickness
1.125
1.6880
1.0000
1.25
1.8750
1.0940
1.375
2.0620
1.2030
1.5
2.2500
1.3130
ANSI Inch Square

and Hex Nuts
Hex Flat Jam Nut
Generic part name: HFJN

Notes:
17 - 11
BASIC_DIA
F
Flat
Width
H
Thickness
1.125
1.6880
0.6250
1.25
1.8750
0.7500
1.375
2.0620
0.8130
1.5
2.2500
0.8750
Heavy Hex Flat Nut
Generic part name: HHFN

Notes:
17 - 12
BASIC_DIA
F
Flat
Width
H
Thickness
1.125
1.8120
1.1250
1.25
2.0000
1.2500
1.375
2.1880
1.3750
1.5
2.3750
1.5000
BASIC_DIA
F
Flat
Width
H
Thickness
1.75
2.7500
1.7500
3.1250
2.0000
2.25
3.5000
2.2500
2.5
3.8750
2.5000
2.75
4.2500
2.7500
4.6250
3.0000
3.25
5.0000
3.2500
3.5
5.3750
3.5000
3.75
5.7500
3.7500
6.1250
4.0000
ANSI Inch Square
and Hex Nuts
Heavy Hex Flat Jam Nut
Generic part name: HHFJN

Notes:
17 - 13
BASIC_DIA
F
Flat
Width
H
Thickness
1.125
1.8120
0.6250
1.25
2.0000
0.7500
1.375
2.1880
0.8130
1.5
2.3750
0.8750
1.75
2.7500
1.0000
3.1250
1.1250
2.25
3.5000
1.2500
2.5
3.8750
1.5000
2.75
4.2500
1.6250
4.6250
1.7500
3.25
5.0000
1.8750
3.5
5.3750
2.0000
3.75
5.7500
2.1250
6.1250
2.2500
Hex Thick Nut
17 - 14
Generic part name: HTN

Notes:

F
Flat
Width
H
Thickness
.25
0.4380
0.2810
.75
1.1250
0.8130
.875
1.3120
0.9060
1.5000
1.0000
1.125
1.6880
1.1560
1.25
1.8750
1.2500
1.375
2.0620
1.3750
1.5
2.2500
1.5000
ANSI Inch Square

and Hex Nuts
BASIC_DIA
Double Chamfered
BASIC_DIA
F
Flat
Width
H
Thickness
.25
0.4380
0.2810
.3125
0.5000
0.3280
.375
0.5620
0.4060
.4375
0.6880
0.4530
.5
0.7500
0.5630
.5625
0.8750
0.6090
.625
0.9380
0.7190
.75
1.1250
0.8130
.875
1.3120
0.9060
1.5000
1.0000
17 - 15
Double Chamfered
BASIC_DIA
F
Flat
Width
H
Thickness
1.125
1.6880
1.1560
1.25
1.8750
1.2500
1.375
2.0620
1.3750
1.5
2.2500
1.5000
Hex Slotted Nut
Generic part name: HSN

Notes:

BASIC_DIA
F
Flat
Width
H
Thickness
T
Unslotted
Thickness
S
Slot
Width
.25
0.4380
0.2190
0.1400
0.1000
.75
1.1250
0.6410
0.4000
0.2400
17 - 16

BASIC_DIA
F
Flat
Width
H
Thickness
T
Unslotted
Thickness
S
Slot
Width
.875
1.3120
0.7500
0.5200
0.2400
1.5000
0.8590
0.5900
0.3000
1.125
1.6880
0.9690
0.6400
0.3300
1.25
1.8750
1.0630
0.7000
0.4000
1.375
2.0620
1.1720
0.8200
0.4000
1.5
2.2500
1.2810
0.8600
0.4600
Double Chamfered
F
Flat
Width
H
Thickness
T
Unslotted
Thickness
S
Slot
Width
.25
0.4380
0.2190
0.1400
0.1000
.3125
0.5000
0.2660
0.1800
0.1200
.375
0.5620
0.3280
0.2100
0.1500
.4375
0.6880
0.3750
0.2300
0.1500
.5
0.7500
0.4380
0.2900
0.1800
.5625
0.8750
0.4840
0.3100
0.1800
.625
0.9380
0.5470
0.3400
0.2400
.75
1.1250
0.6410
0.4000
0.2400
.875
1.3120
0.7500
0.5200
0.2400
1.5000
0.8590
0.5900
0.3000
1.125
1.6880
0.9690
0.6400
0.3300
1.25
1.8750
1.0630
0.7000
0.4000
1.375
2.0620
1.1720
0.8200
0.4000
1.5
2.2500
1.2810
0.8600
0.4600
ANSI Inch Square

and Hex Nuts
BASIC_DIA
17 - 17
Heavy Hex Slotted Nut
Generic part name: HHSN

Notes:

BASIC_DIA
F
Flat
Width
H
Thickness
T
Unslotted
Thickness
S
Slot
Width
.25
0.5000
0.2340
0.1500
0.1000
.5
0.8750
0.4840
0.3400
0.1800
.5625
0.9380
0.5470
0.3700
0.1800
.625
1.0620
0.6090
0.4000
0.2400
.75
1.2500
0.7340
0.4900
0.2400
.875
1.4380
0.8590
0.6200
0.2400
1.6250
0.9840
0.7200
0.3000
1.125
1.8120
1.1090
0.7800
0.3300
1.25
2.0000
1.2190
0.8600
0.4000
1.375
2.1880
1.3440
0.9900
0.4000
1.5
2.3750
1.4690
1.0500
0.4600
17 - 18

BASIC_DIA
F
Flat
Width
H
Thickness
T
Unslotted
Thickness
S
Slot
Width
1.75
2.7500
1.7190
1.2400
0.5200
3.1250
1.9690
1.4300
0.5200
2.25
3.5000
2.2030
1.6700
0.5200
2.5
3.8750
2.4530
1.7900
0.6400
2.75
4.2500
2.7030
2.0500
0.6400
4.6250
2.9530
2.2300
0.7100
3.25
5.0000
3.1880
2.4700
0.7100
3.5
5.3750
3.4380
2.7200
0.7100
3.75
5.7500
3.6880
2.9700
0.7100
6.1250
3.9380
3.2200
0.7100
ANSI Inch Square
and Hex Nuts
Double Chamfered
BASIC_DIA
F
Flat
Width
H
Thickness
T
Unslotted
Thickness
S
Slot
Width
.25
0.5000
0.2340
0.1500
0.1000
.3125
0.5620
0.2970
0.2100
0.1200
.375
0.6880
0.3590
0.2400
0.1500
.4375
0.7500
0.4220
0.2800
0.1500
.5
0.8750
0.4840
0.3400
0.1800
.5625
0.9380
0.5470
0.3700
0.1800
.625
1.0620
0.6090
0.4000
0.2400
.75
1.2500
0.7340
0.4900
0.2400
.875
1.4380
0.8590
0.6200
0.2400
1.6250
0.9840
0.7200
0.3000
1.125
1.8120
1.1090
0.7800
0.3300
1.25
2.0000
1.2190
0.8600
0.4000
1.375
2.1880
1.3440
0.9900
0.4000
1.5
2.3750
1.4690
1.0500
0.4600
17 - 19
Double Chamfered
BASIC_DIA
F
Flat
Width
H
Thickness
T
Unslotted
Thickness
S
Slot
Width
1.75
2.7500
1.7190
1.2400
0.5200
3.1250
1.9690
1.4300
0.5200
2.25
3.5000
2.2030
1.6700
0.5200
2.5
3.8750
2.4530
1.7900
0.6400
2.75
4.2500
2.7030
2.0500
0.6400
4.6250
2.9530
2.2300
0.7100
3.25
5.0000
3.1880
2.4700
0.7100
3.5
5.3750
3.4380
2.7200
0.7100
3.75
5.7500
3.6880
2.9700
0.7100
6.1250
3.9380
3.2200
0.7100
Hex Thick Slotted Nut
Generic part name: HSTN

Notes:
17 - 20

BASIC_DIA
F
Flat
Width
H
Thickness
T
Unslotted
Thickness
S
Slot
Width
.25
0.4380
0.2810
0.2000
0.1000
.75
1.1250
0.8130
0.5700
0.2400
.875
1.3120
0.9060
0.6700
0.2400
1.5000
1.0000
0.7300
0.3000
1.125
1.6880
1.1560
0.8300
0.3300
1.25
1.8750
1.2500
0.8900
0.4000
1.375
2.0620
1.3750
1.0200
0.4000
1.5
2.2500
1.5000
1.0800
0.4600
ANSI Inch Square
and Hex Nuts
Double Chamfered
BASIC_DIA
F
Flat
Width
H
Thickness
T
Unslotted
Thickness
S
Slot
Width
.25
0.4380
0.2810
0.2000
0.1000
.3125
0.5000
0.3280
0.2400
0.1200
.375
0.5620
0.4060
0.2900
0.1500
.4375
0.6880
0.4530
0.3100
0.1500
.5
0.7500
0.5630
0.4200
0.1800
.5625
0.8750
0.6090
0.4300
0.1800
.625
0.9380
0.7190
0.5100
0.2400
.75
1.1250
0.8130
0.5700
0.2400
.875
1.3120
0.9060
0.6700
0.2400
1.5000
1.0000
0.7300
0.3000
1.125
1.6880
1.1560
0.8300
0.3300
1.25
1.8750
1.2500
0.8900
0.4000
1.375
2.0620
1.3750
1.0200
0.4000
1.5
2.2500
1.5000
1.0800
0.4600
17 - 21
Square Nut
Generic part name: SQN

Notes:
Flat Bottom
17 - 22
BASIC_DIA
F
Flat Width
H
Thickness
.25
0.4380
0.219
.3125
0.5620
0.266
.375
0.6250
0.328
.4375
0.7500
0.375
.5
0.8120
0.438
.625
1.0000
0.547
.75
1.1250
0.656
.875
1.3120
0.766
1.5000
0.875
1.125
1.6880
1.000
1.25
1.8750
1.094
1.375
2.0620
1.203
Flat Bottom
BASIC_DIA
F
Flat Width
H
Thickness
1.5
2.2500
1.313
Chamfered Bottom
F
Flat Width
H
Thickness
.25
0.4380
0.219
.3125
0.5620
0.266
.375
0.6250
0.328
.4375
0.7500
0.375
.5
0.8120
0.438
.625
1.0000
0.547
.75
1.1250
0.656
.875
1.3120
0.766
1.5000
0.875
1.125
1.6880
1.000
1.25
1.8750
1.094
1.375
2.0620
1.203
1.5
2.2500
1.313
ANSI Inch Square

and Hex Nuts
BASIC_DIA
17 - 23
Heavy Square Nut
Generic part name: HSQN

Notes:
Flat Bottom
17 - 24
BASIC_DIA
F
Flat Width
H
Thickness
.25
0.5000
0.250
.3125
0.5620
0.313
.375
0.6880
0.375
.4375
0.7500
0.438
.5
0.8750
0.500
.625
1.0620
0.625
.75
1.2500
0.750
.875
1.4380
0.875
1.6250
1.000
1.125
1.8120
1.125
1.25
2.0000
1.250
1.375
2.1880
1.375
Flat Bottom
BASIC_DIA
F
Flat Width
H
Thickness
1.5
2.3750
1.500
Chamfered Bottom
F
Flat Width
H
Thickness
.25
0.5000
0.250
.3125
0.5620
0.313
.375
0.6880
0.375
.4375
0.7500
0.438
.5
0.8750
0.500
.625
1.0620
0.625
.75
1.2500
0.750
.875
1.4380
0.875
1.6250
1.000
1.125
1.8120
1.125
1.25
2.0000
1.250
1.375
2.1880
1.375
1.5
2.3750
1.500
ANSI Inch Square

and Hex Nuts
BASIC_DIA
17 - 25
17 - 26
18
ANSI Inch T-Bolts and T-Nuts
18 - 1
Standard T-Bolts
Generic Part Name: ASTB

Notes:
Corresponds to standard ISO 12345.

NAME
NOMINAL_
DIA_
THR_
PITCH
basic_
dia
flat_
width
head_
height
length
thread_
length
ASTB01
0.250-20
0.25000
0.46900
0.15600
1.0 to 7.5
by 0.25
0.75, 1.0
ASTB02
0.312-18
0.31200
0.56200
0.18800
1.25 to 8 by
0.25, 8.5, 9
0.875,
1.125
ASTB03
0.375-16
0.37500
0.68800
0.25000
1.25 to 8 by
0.25, 8.50
to 11 by 0.5
1, 1.25
ASTB04
0.500-13
0.50000
0.87500
0.31200
1.5 to 8 by
0.25, 8.5 to
15 by 0.5
1.25, 1.5
ASTB05
0.625-11
0.62500
1.12500
0.40600
1.75 to 8 by
0.25, 8.5 to
18 by 0.5
1.5, 1.75
18 - 2
NOMINAL_
DIA_
THR_
PITCH
basic_
dia
flat_
width
head_
height
length
thread_
length
ASTB06
0.750-10
0.75000
1.31200
0.53100
2 to 8 by
0.25, 8.5 to
20 by 0.5,
21, 22
1.75, 2
ASTB07
1.000-8
1.00000
1.68800
0.68800
2.5 to 8 by
0.25, 8.5 to
20 by 0.5,
21 to 24 by
1
2.25, 2.5
ASTB08
1.250-7
1.25000
2.06200
0.93800
3 to 8 by
0.25, 8.5 to
20 by 0.5,
21 to 24 by
1
2.75, 3
ASTB09
1.500-6
1.50000
2.50000
1.18800
3.5 to 8 by
0.25, 8.5 to
20 by 0.5,
21 to 24 by
1
3.25, 3.5
ANSI Inch T-Bolts

and T-Nuts
NAME
Standard T-Nuts
ANSI Inch T-Bolts and T-Nuts
18 - 3
Generic Part Name: ASTN

Notes:
Corresponds to standard ISO 123.

NAME
BASIC
DIA
NOMINAL
DIA
THR PITCH
tongue
width
stud_
tap
nut_
width
nut_
height
total_
thick
nut_
length
ASTN01
0.312
0.250-20
0.33000
0.25000
0.56200
0.18800
0.28100
0.56200
ASTN02
0.375
0.312-18
0.41800
0.31200
0.68800
0.25000
0.37500
0.68800
ASTN03
0.500
0.375-16
0.54300
0.37500
0.87500
0.31200
0.53100
0.87500
ASTN04
0.625
0.500-13
0.66800
0.50000
1.12500
0.40600
0.62500
1.12500
ASTN05
0.750
0.625-11
0.78300
0.62500
1.31200
0.53100
0.78100
1.31200
ASTN06
1.000
0.750-10
1.03300
0.75000
1.68800
0.68800
1.00000
1.68800
ASTN07
1.250
1.000-8
1.27300
1.00000
2.06200
0.93800
1.31200
2.06200
ASTN08
1.500
1.250-7
1.52300
1.25000
2.50000
1.18800
1.62500
2.50000
18 - 4
19
ANSI Inch Tapping Screws
19 - 1
Type B Slotted Pan Head Tapping Screw
Generic part name: TSAA

Notes:
BASIC
DIA
PITCH
DIA
A
Head
Dia
H
Head
Height
R
Head
Radius
J
Slot
Width
T
Slot
Depth
P
Point
Dia
S
Point
Length
L
Lengths
NO.0
0.0480
0.116
0.039
0.020
0.023
0.022
0.0310
0.0420
0.125-1.25,
.0625
NO.1
0.0620
0.142
0.046
0.025
0.026
0.027
0.0440
0.0480
0.125-1.25,
.0625
NO.2
0.0760
0.167
0.053
0.035
0.031
0.031
0.0580
0.0620
0.125-1.25,
.0625
NO.3
0.0880
0.193
0.060
0.037
0.035
0.036
0.0680
0.0710
0.1875-1.25,
.0625
NO.4
0.1000
0.219
0.068
0.042
0.039
0.040
0.0790
0.0830
0.1875-1.5,
.0625
NO.5
0.1120
0.245
0.075
0.044
0.043
0.045
0.0870
0.1000
0.1875-1.5,
.0625
NO.6
0.1210
0.270
0.082
0.046
0.048
0.050
0.0950
0.1000
0.25-2.5,
.0625
NO.8
0.1440
0.322
0.096
0.052
0.054
0.058
0.1120
0.1110
0.25-2.5,.
0625
NO.10
0.1650
0.373
0.110
0.061
0.060
0.068
0.1300
0.1250
0.3125-3.0,
.0625
19 - 2
BASIC
DIA
PITCH
DIA
A
Head
Dia
H
Head
Height
R
Head
Radius
J
Slot
Width
T
Slot
Depth
P
Point
Dia
S
Point
Length
L
Lengths
NO.12
0.1895
0.425
0.125
0.078
0.067
0.077
0.1520
0.1430
0.3125-3.0,
.0625
.25
0.2190
0.492
0.144
0.087
0.075
0.087
0.1790
0.1430
0.375-3.0,
.0625
.3125
0.2795
0.615
0.178
0.099
0.084
0.106
0.2300
0.1670
0.4375-3.0,
.0625
.375
0.3445
0.740
0.212
0.143
0.094
0.124
0.2930
0.1670
0.5-3.0,
.0625
.4375
0.3995
0.863
0.247
0.153
0.094
0.142
0.3430
0.2000
0.5625-3.0,
.0625
.5
0.4635
0.987
0.281
0.175
0.106
0.161
0.4070
0.2000
0.75-3.0,
.0625
Type AB Slotted Pan Head Tapping Screw
ANSI Inch Tapping

Screws
Generic part name: TSBB

Notes:
BASIC
_DIA
PITCH
DIA
A
Head
Dia
H
Head
Height
R
Head
Radius
J
Slot
Width
T
Slot
Depth
L
Lengths
NO.0
0.0480
0.116
0.039
0.020
0.023
0.022
0.125-1.0,.0625
19 - 3
BASIC
_DIA
PITCH
DIA
A
Head
Dia
H
Head
Height
R
Head
Radius
J
Slot
Width
T
Slot
Depth
L
Lengths
NO.1
0.0620
0.142
0.046
0.025
0.026
0.027
0.125-1.0,.0625
NO.2
0.0760
0.167
0.053
0.035
0.031
0.031
0.1875-1.25,.0625
NO.3
0.0880
0.193
0.060
0.037
0.035
0.036
0.1875-1.5,.0625
NO.4
0.1000
0.219
0.068
0.042
0.039
0.040
0.1875-1.5,.0625
NO.5
0.1120
0.245
0.075
0.044
0.043
0.045
0.25-1.5,.0625
NO.6
0.1210
0.270
0.082
0.046
0.048
0.050
0.25-2.0,.0625
NO.8
0.1440
0.322
0.096
0.052
0.054
0.058
0.3125-2.0,.0625
NO.10
0.1650
0.373
0.110
0.061
0.060
0.068
0.3125-3.0,.0625
NO.12
0.1895
0.425
0.125
0.078
0.067
0.077
0.375-3.0,.0625
.25
0.2190
0.492
0.144
0.087
0.075
0.087
0.375-3.0,.0625
.3125
0.2795
0.615
0.178
0.099
0.084
0.106
0.4375-3.0,.0625
.375
0.3445
0.740
0.212
0.143
0.094
0.124
0.5-3.0,.0625
.4375
0.3995
0.863
0.247
0.153
0.094
0.142
0.75-3.0,.0625
.5
0.4635
0.987
0.281
0.175
0.106
0.161
0.75-3.0,.0625
Type B Slotted Flat Countersunk Head

Tapping Screw
Generic part name: TSCC

Notes:
19 - 4
BASIC
_DIA
PITCH
DIA
A
Head
Dia
J
Slot
Width
T
Slot
Depth
P
Point
Dia
S
Point
Length
L
Lengths
NO.0
0.0480
0.119
0.023
0.015
0.0310
0.0420
0.125-1.0,.0625
NO.1
0.0620
0.146
0.026
0.019
0.0440
0.0480
0.125-1.0,.0625
NO.2
0.0760
0.172
0.031
0.023
0.0580
0.0620
0.1875-1.25,.0625
NO.3
0.0880
0.199
0.035
0.027
0.0680
0.0710
0.1875-1.5,.0625
NO.4
0.1000
0.225
0.039
0.030
0.0790
0.0830
0.1875-1.5,.0625
NO.5
0.1120
0.252
0.043
0.034
0.0870
0.1000
0.25-1.5,.0625
NO.6
0.1215
0.279
0.048
0.038
0.0950
0.1000
0.25-2.0,.0625
NO.8
0.1440
0.332
0.054
0.045
0.1120
0.1110
0.3125-2.0,.0625
NO.10
0.1650
0.385
0.060
0.053
0.1300
0.1250
0.3125-3.0,.0625
NO.12
0.1895
0.438
0.067
0.060
0.1520
0.1430
0.375-3.0,.0625
.25
0.2190
0.507
0.075
0.070
0.1790
0.1430
0.375-3.0,.0625
.3125
0.2795
0.635
0.084
0.088
0.2300
0.1670
0.4375-3.0,.0625
.375
0.3445
0.762
0.094
0.106
0.2930
0.1670
0.5-3.0,.0625
.4375
0.3995
0.812
0.094
0.103
0.3430
0.2000
0.75-3.0,.0625
.5
0.4635
0.875
0.106
0.103
0.4070
0.2000
0.75-3.0,.0625
ANSI Inch Tapping
Screws
Type AB Slotted Flat Countersunk Head

Tapping Screw
19 - 5
Generic part name: TSDD

Notes:
BASIC_
DIA
PITCH
DIA
A
Head
Dia
J
Slot
Width
T
Slot
Depth
L
Lengths
NO.0
0.0480
0.119
0.023
0.015
0.125-1.0,.0625
NO.1
0.0620
0.146
0.026
0.019
0.1875-1.0,.0625
NO.2
0.0760
0.172
0.031
0.023
0.1875-1.25,.0625
NO.3
0.0880
0.199
0.035
0.027
0.1875-1.5,.0625
NO.4
0.1000
0.225
0.039
0.030
0.25-1.5,.0625
NO.5
0.1120
0.252
0.043
0.034
0.25-1.5,.0625
NO.6
0.1215
0.279
0.048
0.038
0.3125-2.0,.0625
NO.8
0.1440
0.332
0.054
0.045
0.3125-2.0,.0625
NO.10
0.1650
0.385
0.060
0.053
0.375-3.0,.0625
NO.12
0.1895
0.438
0.067
0.060
0.4375-3.0,.0625
.25
0.2190
0.507
0.075
0.070
0.5-3.0,.0625
.3125
0.2795
0.635
0.084
0.088
0.625-3.0,.0625
.375
0.3445
0.762
0.094
0.106
0.75-3.0,.0625
.4375
0.3995
0.812
0.094
0.103
0.8125-3.0,.0625
.5
0.4635
0.875
0.106
0.103
0.9375-3.0,.0625
19 - 6
Type B Slotted Oval Countersunk Head

Tapping Screw
Generic part name: TSEE

Notes:
PITCH
DIA
A
Head
Dia
O
Total
Height
J
Slot
Width
T
Slot
Depth
P
Point
Dia
S
Point
Length
L
Lengths
NO.0
0.0480
0.119
0.056
0.023
0.030
0.0310
0.0420
0.125-1.0,.0625
NO.1
0.0620
0.146
0.068
0.026
0.038
0.0440
0.0480
0.125-1.0,.0625
NO.2
0.0760
0.172
0.080
0.031
0.045
0.0580
0.0620
0.1875-1.25,.0625
NO.3
0.0880
0.199
0.092
0.035
0.052
0.0680
0.0710
0.1875-1.5,.0625
NO.4
0.1000
0.225
0.104
0.039
0.059
0.0790
0.0830
0.1875-1.5,.0625
NO.5
0.1120
0.252
0.116
0.043
0.067
0.0870
0.1000
0.25-1.5,.0625
NO.6
0.1215
0.279
0.128
0.048
0.074
0.0950
0.1000
0.25-2.0,.0625
NO.8
0.1440
0.332
0.152
0.054
0.088
0.1120
0.1110
0.3125-2.0,.0625
NO.10
0.1650
0.385
0.176
0.060
0.103
0.1300
0.1250
0.3125-3.0,.0625
NO.12
0.1895
0.438
0.200
0.067
0.117
0.1520
0.1430
0.375-3.0,.0625
.25
0.2190
0.507
0.232
0.075
0.136
0.1790
0.1430
0.375-3.0,.0625
.3125
0.2795
0.635
0.290
0.084
0.171
0.2300
0.1670
0.4375-3.0,.0625
19 - 7
ANSI Inch Tapping

Screws
BASIC
_DIA
BASIC
_DIA
PITCH
DIA
A
Head
Dia
O
Total
Height
J
Slot
Width
T
Slot
Depth
P
Point
Dia
S
Point
Length
L
Lengths
.375
0.3445
0.762
0.347
0.094
0.206
0.2930
0.1670
0.5-3.0,.0625
.4375
0.3995
0.812
0.345
0.094
0.210
0.3430
0.2000
0.75-3.0,.0625
.5
0.4635
0.875
0.354
0.106
0.216
0.4070
0.2000
0.75-3.0,.0625
Type AB Slotted Oval Countersunk Head

Tapping Screw
Generic part name: TSFF

Notes:
BASIC_
DIA
PITCH
DIA
A
Head
Dia
O
Total
Height
J
Slot
Width
T
Slot
Depth
L
Lengths
NO.0
0.0480
0.119
0.056
0.023
0.030
0.125-1.0,.0625
NO.1
0.0620
0.146
0.068
0.026
0.038
0.1875-1.0,.0625
NO.2
0.0760
0.172
0.080
0.031
0.045
0.1875-1.25,.0625
NO.3
0.0880
0.199
0.092
0.035
0.052
0.1875-1.5,.0625
19 - 8
BASIC_
DIA
PITCH
DIA
A
Head
Dia
O
Total
Height
J
Slot
Width
T
Slot
Depth
L
Lengths
NO.4
0.1000
0.225
0.104
0.039
0.059
0.25-1.5,.0625
NO.5
0.1120
0.252
0.116
0.043
0.067
0.25-1.5,.0625
NO.6
0.1215
0.279
0.128
0.048
0.074
0.3125-2.0,.0625
NO.8
0.1440
0.332
0.152
0.054
0.088
0.3125-2.0,.0625
NO.10
0.1650
0.385
0.176
0.060
0.103
0.375-3.0,.0625
NO.12
0.1895
0.438
0.200
0.067
0.117
0.4375-3.0,.0625
.25
0.2190
0.507
0.232
0.075
0.136
0.5-3.0,.0625
.3125
0.2795
0.635
0.290
0.084
0.171
0.625-3.0,.0625
.375
0.3445
0.762
0.347
0.094
0.206
0.75-3.0,.0625
.4375
0.3995
0.812
0.345
0.094
0.210
0.8125-3.0,.0625
.5
0.4635
0.875
0.354
0.106
0.216
1.0-3.0,.0625
Type B Slotted Fillister Head Tapping Screw
ANSI Inch Tapping

Screws
Generic part name: TSGG

Notes:
19 - 9
BASIC
DIA
PITCH
DIA
A
Head
Dia
H
Side
Height
O
Total
Height
J
Slot
Width
T
Slot
Depth
P
Point
Dia
S
Point
Length
L
Lengths
NO.0
0.0480
0.096
0.043
0.055
0.023
0.025
0.0310
0.0420
0.125-1.0,.0625
NO.1
0.0620
0.118
0.053
0.066
0.026
0.031
0.0440
0.0480
0.125-1.0,.0625
NO.2
0.0760
0.140
0.062
0.083
0.031
0.037
0.0580
0.0620
0.1875-1.25,.0625
NO.3
0.0880
0.161
0.070
0.095
0.035
0.043
0.0680
0.0710
0.1875-1.5,.0625
NO.4
0.1000
0.183
0.079
0.107
0.039
0.048
0.0790
0.0830
0.1875-1.5,.0625
NO.5
0.1120
0.205
0.088
0.120
0.043
0.054
0.0870
0.1000
0.25-1.5,.0625
NO.6
0.1215
0.226
0.096
0.132
0.048
0.060
0.0950
0.1000
0.25-2.0,.0625
NO.8
0.1440
0.270
0.113
0.156
0.540
0.071
0.1120
0.1110
0.3125-2.0,.0625
NO.10
0.1650
0.313
0.130
0.180
0.060
0.083
0.1300
0.1250
0.3125-3.0,.0625
NO.12
0.1895
0.357
0.148
0.205
0.067
0.094
0.1520
0.1430
0.375-3.0,.0625
.25
0.2190
0.414
0.170
0.237
0.075
0.109
0.1790
0.1430
0.375-3.0,.0625
.3125
0.2795
0.518
0.211
0.295
0.084
0.137
0.2300
0.1670
0.4375-3.0,.0625
.375
0.3445
0.622
0.253
0.355
0.094
0.164
0.2930
0.1670
0.5-3.0,.0625
.4375
0.3995
0.625
0.265
0.368
0.094
0.170
0.3430
0.2000
0.75-3.0,.0625
.5
0.4635
0.750
0.297
0.412
0.106
0.190
0.4070
0.2000
0.75-3.0,.0625
Type AB Slotted Fillister Head Tapping Screw
Generic part name: TSHH

Notes:
19 - 10
BASIC
_DIA
PITCH
DIA
A
Head
Dia
H
Side
Height
O
Total
Height
J
Slot
Width
T
Slot
Depth
L
Lengths
NO.0
0.0480
0.096
0.043
0.055
0.023
0.025
0.125-1.0,.0625
NO.1
0.0620
0.118
0.053
0.066
0.026
0.031
0.125-1.0,.0625
NO.2
0.0760
0.140
0.062
0.083
0.031
0.037
0.1875-1.25,.0625
NO.3
0.0880
0.161
0.070
0.095
0.035
0.043
0.1875-1.5,.0625
NO.4
0.1000
0.183
0.079
0.107
0.039
0.048
0.1875-1.5,.0625
NO.5
0.1120
0.205
0.088
0.120
0.043
0.054
0.25-1.5,.0625
NO.6
0.1215
0.226
0.096
0.132
0.048
0.060
0.25-2.0,.0625
NO.8
0.1440
0.270
0.113
0.156
0.540
0.071
0.3125-2.0,.0625
NO.10
0.1650
0.313
0.130
0.180
0.060
0.083
0.3125-3.0,.0625
NO.12
0.1895
0.357
0.148
0.205
0.067
0.094
0.375-3.0,.0625
.25
0.2190
0.414
0.170
0.237
0.075
0.109
0.375-3.0,.0625
.3125
0.2795
0.518
0.211
0.295
0.084
0.137
0.4375-3.0,.0625
.375
0.3445
0.622
0.253
0.355
0.094
0.164
0.5-3.0,.0625
.4375
0.3995
0.625
0.265
0.368
0.094
0.170
0.75-3.0,.0625
.5
0.4635
0.750
0.297
0.412
0.106
0.190
0.75-3.0,.0625
Type B Plain Hex Washer Head Tapping Screw

ANSI Inch Tapping
Screws
19 - 11
Generic part name: TSII

Notes:
PITCH
DIA
B
Washer
Dia
U
Washer
Thickn
s
P
Point
Dia
S
Point
Length
L
Lengths
0.0440
0.0760
0.1660
0.0160
0.0580
0.0620
0.125-1.25,.0625
0.1250
0.0550
0.0880
0.1770
0.0160
0.0680
0.0710
0.1875-1.25,.0625
0.1880
0.0600
0.1000
0.2430
0.0190
0.0790
0.0830
0.1875-1.5,.0625
NO.5
0.1880
0.0700
0.1120
0.2600
0.0250
0.0870
0.1000
0.1875-1.5,.0625
NO.6
0.2500
0.0930
0.1215
0.3280
0.0250
0.0950
0.1000
0.25-2.5,.0625
BASIC_
DIA
A
Flat
Width
H
Head
Height
NO.2
0.1250
NO.3
NO.4
NO.8
0.2500
0.1100
0.1440
0.3480
0.0310
0.1120
0.1110
0.25-2.5,.0625
NO.10
0.3120
0.1200
0.1650
0.4140
0.0310
0.1300
0.1250
0.3125-3.0,.0625
NO.12
0.3120
0.1550
0.1895
0.4320
0.0390
0.1520
0.1430
0.3125-3.0,.0625
.25
0.3750
0.1900
0.2190
0.5200
0.0500
0.1790
0.1430
0.375-3.0,.0625
.3125
0.5000
0.2300
0.2795
0.6760
0.0550
0.2300
0.1670
0.4375-3.0,.0625
.375
0.5620
0.2950
0.3445
0.7800
0.0630
0.2930
0.1670
0.5-3.0,.0625
Type AB Plain Hex Washer Head Tapping

Screw
19 - 12
Generic part name: TSJJ

Notes:
BASIC_
DIA
A
Flat
Width
H
Head
Height
PITCH
DIA
B
Washer
Dia
U
Washer
Thickns
L
Lengths
NO.2
0.1250
0.0440
0.0760
0.1660
0.0160
0.125-1.25,.0625
NO.3
0.1250
0.0550
0.0880
0.1770
0.0160
0.1875-1.25,.0625
NO.4
0.1880
0.0600
0.1000
0.2430
0.0190
0.1875-1.5,.0625
NO.5
0.1880
0.0700
0.1120
0.2600
0.0250
0.1875-1.5,.0625
NO.6
0.2500
0.0930
0.1215
0.3280
0.0250
0.25-2.5,.0625
NO.8
0.2500
0.1100
0.1440
0.3480
0.0310
0.25-2.5,.0625
NO.10
0.3120
0.1200
0.1650
0.4140
0.0310
0.3125-3.0,.0625
NO.12
0.3120
0.1550
0.1895
0.4320
0.0390
0.3125-3.0,.0625
.25
0.3750
0.1900
0.2190
0.5200
0.0500
0.375-3.0,.0625
.3125
0.5000
0.2300
0.2795
0.6760
0.0550
0.4375-3.0,.0625
.375
0.5620
0.2950
0.3445
0.7800
0.0630
0.5-3.0,.0625
ANSI Inch Tapping

Screws
19 - 13
Type B, Type I Cross Recessed Pan Head

Tapping Screw
Generic part name: TSKK

Notes:
BASIC
DIA
PITCH
DIA
A
Head
Dia
H
Head
Height
R
Head
Radius
M
Recess
Dia
N
Recess
Width
P
Point
Dia
S
Point
Length
L
Lengths
NO.0
0.0480
0.116
0.039
0.020
0.067
0.013
0.0310
0.0420
.125 - 1.25, .0625
NO.1
0.0620
0.142
0.046
0.025
0.074
0.014
0.0440
0.0480
.125 - 1.25, .0625
NO.2
0.0760
0.167
0.053
0.035
0.104
0.017
0.0580
0.0620
.125 - 1.25, .0625
NO.3
0.0880
0.193
0.060
0.037
0.112
0.019
0.0680
0.0710
.1875 - 1.25, .0625
NO.4
0.1000
0.219
0.068
0.042
0.122
0.019
0.0790
0.0830
.1875 - 1.5, .0625
NO.5
0.1120
0.245
0.075
0.044
0.158
0.028
0.0870
0.1000
.1875 - 1.5, .0625
NO.6
0.1215
0.270
0.082
0.046
0.166
0.028
0.0950
0.1000
.25 - 2.5, .0625
NO.8
0.1440
0.322
0.096
0.052
0.182
0.030
0.1120
0.1110
.25 - 2.5, .0625
NO.10
0.1650
0.373
0.110
0.061
0.199
0.031
0.1300
0.1250
.3125 - 3, .0625
NO.12
0.1895
0.425
0.125
0.078
0.259
0.034
0.1520
0.1430
.3125 - 3, .0625
.25
0.2190
0.492
0.144
0.087
0.281
0.036
0.1790
0.1430
.375 - 3, .0625
.3125
0.2795
0.615
0.178
0.099
0.350
0.059
0.2300
0.1670
.4375 - 3, .0625
.375
0.3445
0.740
0.212
0.143
0.389
0.065
0.2930
0.1670
.5 - 3, .0625
19 - 14
BASIC
DIA
PITCH
DIA
A
Head
Dia
H
Head
Height
R
Head
Radius
M
Recess
Dia
N
Recess
Width
P
Point
Dia
S
Point
Length
L
Lengths
.4375
0.3995
0.863
0.247
0.153
0.413
0.068
0.3430
0.2000
.5625 - 3, .0625
.5
0.4635
0.987
0.281
0.175
0.435
0.071
0.4070
0.2000
.75 - 3, .0625
Type AB, Type I Cross Recessed Pan Head

Tapping Screw
Generic part name: TSLL

Notes:
BASIC
DIA
PITCH
DIA
A
Head
Dia
H
Head
Height
R
Head
Radius
M
Recess
Dia.
N
Recess
Width
L
Lengths
NO.0
0.0480
0.116
0.039
0.020
0.067
0.013
.125 - 1.25, .0625
NO.1
0.0620
0.142
0.046
0.025
0.074
0.014
.125 - 1.25, .0625
NO.2
0.0760
0.167
0.053
0.035
0.104
0.017
.125 - 1.25, .0625
NO.3
0.0880
0.193
0.060
0.037
0.112
0.019
.1875 - 1.25, .0625
NO.4
0.1000
0.219
0.068
0.042
0.122
0.019
.1875 - 1.5, .0625
19 - 15
ANSI Inch Tapping

Screws
BASIC
DIA
PITCH
DIA
A
Head
Dia
H
Head
Height
R
Head
Radius
M
Recess
Dia.
N
Recess
Width
L
Lengths
NO.5
0.1120
0.245
0.075
0.044
0.158
0.028
.1875 - 1.5, .0625
NO.6
0.1215
0.270
0.082
0.046
0.166
0.028
.25 - 2.5, .0625
NO.8
0.1440
0.322
0.096
0.052
0.182
0.030
.25 - 2.5, .0625
NO.10
0.1650
0.373
0.110
0.061
0.199
0.031
.3125 - 3, .0625
NO.12
0.1895
0.425
0.125
0.078
0.259
0.034
.3125 - 3, .0625
.25
0.2190
0.492
0.144
0.087
0.281
0.036
.375 - 3, .0625
.3125
0.2795
0.615
0.178
0.099
0.350
0.059
.4375 - 3, .0625
.375
0.3445
0.740
0.212
0.143
0.389
0.065
.5 - 3, .0625
.4375
0.3995
0.863
0.247
0.153
0.413
0.068
.5625 - 3, .0625
.5
0.4635
0.987
0.281
0.175
0.435
0.071
.75 - 3, .0625
Type B, Type I Cross Recessed Flat

Countersunk Head
Generic part name: TSMM

Notes:
19 - 16
BASIC
DIA
PITCH
DIA
A
Head
Dia
M
Recess
Dia
N
Recess
Width
P
Point
Dia
S
Point
Length
L
Lengths
NO.0
0.0480
0.119
0.069
0.014
0.0310
0.0420
.125 - 1.25, .0625
NO.1
0.0620
0.146
0.077
0.015
0.0440
0.0480
.125 - 1.25, .0625
NO.2
0.0760
0.172
0.102
0.017
0.0580
0.0620
.1875 - 1.25, .0625
NO.3
0.0880
0.199
0.107
0.018
0.0680
0.0710
.25 - 1.25, .0625
NO.4
0.1000
0.225
0.128
0.018
0.0790
0.0830
.25 - 1.5, .0625
NO.5
0.1120
0.252
0.154
0.027
0.0870
0.1000
.3125 - 1.5, .0625
NO.6
0.1215
0.279
0.174
0.029
0.0950
0.1000
.3125 - 2.5, .0625
NO.8
0.1440
0.332
0.189
0.030
0.1120
0.1110
.375 - 2.5, .0625
NO.10
0.1650
0.385
0.204
0.032
0.1300
0.1250
.375 - 3, .0625
NO.12
0.1895
0.438
0.268
0.035
0.1520
0.1430
.4375 - 3, .0625
.25
0.2190
0.507
0.283
0.036
0.1790
0.1430
.5 - 3, .0625
.3125
0.2795
0.635
0.365
0.061
0.2300
0.1670
.625 - 3, .0625
.375
0.3445
0.762
0.393
0.065
0.2930
0.1670
.6875 - 3, .0625
.4375
0.3995
0.812
0.409
0.068
0.3430
0.2000
.8125 - 3, .0625
.5
0.4635
0.875
0.424
0.069
0.4070
0.2000
.875 - 3, .0625
ANSI Inch Tapping

Screws
Type AB, Type I Cross Recessed Flat

Countersunk Head
19 - 17
Generic part name: TSNN

Notes:
BASIC
DIA
19 - 18
PITCH
DIA
A
Head
Dia
M
Recess
Dia
N
Recess
Width
L
Lengths
NO.0
0.0480
0.119
0.069
0.014
.1875 - 1.25, .0625
NO.1
0.0620
0.146
0.077
0.015
.1875 - 1.25, .0625
NO.2
0.0760
0.172
0.102
0.017
.25 - 1.25, .0625
NO.3
0.0880
0.199
0.107
0.018
.25 - 1.5, .0625
NO.4
0.1000
0.225
0.128
0.018
.3125 - 1.5, .0625
NO.5
0.1120
0.252
0.154
0.027
.3125 - 1.5, .0625
NO.6
0.1215
0.279
0.174
0.029
.375 - 2.5, .0625
NO.8
0.1440
0.332
0.189
0.030
.375 - 2.5, .0625
NO.10
0.1650
0.385
0.204
0.032
.4375 - 3, .0625
NO.12
0.1895
0.438
0.268
0.035
.625 - 3, .0625
.25
0.2190
0.507
0.283
0.036
.6875 - 3, .0625
.3125
0.2795
0.635
0.365
0.061
.75 - 3, .0625
.375
0.3445
0.762
0.393
0.065
.9375 - 3, .0625
.4375
0.3995
0.812
0.409
0.068
1 - 3, .0625
.5
0.4635
0.875
0.424
0.069
1 - 3, .0625
Type B, Type I Cross Recessed Oval

Countersunk Head
Generic part name: TSOO

Notes:
PITCH
DIA
A
Head
Dia
O
Total
Height
M
Recess
Dia
N
Recess
Width
P
Point
Dia
S
Point
Length
L
Lengths
NO.0
0.0480
0.119
0.056
0.074
0.014
0.0310
0.0420
0.1875-1.25, .0625
NO.1
0.0620
0.146
0.068
0.077
0.015
0.0440
0.0480
0.1875-1.25, .0625
NO.2
0.0760
0.172
0.080
0.112
0.018
0.0580
0.0620
0.25-1.25, .0625
NO.3
0.0880
0.199
0.092
0.124
0.019
0.0680
0.0710
0.25-1.5, .0625
NO.4
0.1000
0.225
0.104
0.136
0.019
0.0790
0.0830
0.3125-1.5, .0625
NO.5
0.1120
0.252
0.116
0.158
0.028
0.0870
0.1000
0.3125-1.5, .0625
NO.6
0.1215
0.279
0.128
0.178
0.030
0.0950
0.1000
0.375-2.5, .0625
NO.8
0.1440
0.332
0.152
0.192
0.031
0.1120
0.1110
0.375-2.5, .0625
NO.10
0.1650
0.385
0.176
0.209
0.033
0.1300
0.1250
0.4375-3.0, .0625
NO.12
0.1895
0.438
0.200
0.270
0.038
0.1520
0.1430
0.625-3.0, .0625
.25
0.2190
0.507
0.232
0.290
0.040
0.1790
0.1430
0.6875-3.0, .0625
.3125
0.2795
0.635
0.290
0.390
0.065
0.2300
0.1670
0.75-3.0, .0625
.375
0.3445
0.762
0.347
0.410
0.068
0.2930
0.1670
0.9375-3.0, .0625
19 - 19
ANSI Inch Tapping

Screws
BASIC
_DIA
BASIC
_DIA
PITCH
DIA
A
Head
Dia
O
Total
Height
M
Recess
Dia
N
Recess
Width
P
Point
Dia
S
Point
Length
L
Lengths
.4375
0.3995
0.812
0.345
0.422
0.070
0.3430
0.2000
1-3.0, .0625
.5
0.4635
0.875
0.354
0.437
0.071
0.4070
0.2000
1-3.0, .0625
Type AB, Type I Cross Recessed Oval

Countersunk Head
Generic part name: TSPP

Notes:
BASIC
_DIA
PITCH
DIA
A
Head
Dia
O
Total
Height
M
Recess
Dia
N
Recess
Width
L
Lengths
NO.0
0.0480
0.119
0.056
0.074
0.014
0.1875-1.25, .0625
NO.1
0.0620
0.146
0.068
0.077
0.015
0.1875-1.25, .0625
NO.2
0.0760
0.172
0.080
0.112
0.018
0.25-1.25, .0625
NO.3
0.0880
0.199
0.092
0.124
0.019
0.25-1.5, .0625
NO.4
0.1000
0.225
0.104
0.136
0.019
0.3125-1.5, .0625
NO.5
0.1120
0.252
0.116
0.158
0.028
0.3125-1.5, .0625
NO.6
0.1215
0.279
0.128
0.178
0.030
0.375-2.5, .0625
NO.8
0.1440
0.332
0.152
0.192
0.031
0.375-2.5, .0625
19 - 20
BASIC
_DIA
PITCH
DIA
A
Head
Dia
O
Total
Height
M
Recess
Dia
N
Recess
Width
L
Lengths
NO.10
0.1650
0.385
0.176
0.209
0.033
0.4375-3.0, .0625
NO.12
0.1895
0.438
0.200
0.270
0.038
0.625-3.0, .0625
.25
0.2190
0.507
0.232
0.290
0.040
0.6875-3.0, .0625
.3125
0.2795
0.635
0.290
0.390
0.065
0.75-3.0, .0625
.375
0.3445
0.762
0.347
0.410
0.068
0.9375-3.0, .0625
.4375
0.3995
0.812
0.345
0.422
0.070
1-3.0, .0625
.5
0.4635
0.875
0.354
0.437
0.071
1-3.0, .0625
Type B, Type I Cross Recessed Fillister Head
ANSI Inch Tapping

Screws
Generic part name: TSQQ

Notes:
BASIC
DIA
PITCH
DIA
A
Head
Dia
H
Side
Height
O
Total
Height
M
Recess
Dia
N
Recess
Width
P
Point
Dia
S
Point
Length
L
Lengths
NO.0
0.0480
0.096
0.043
0.055
0.067
0.013
0.0310
0.0420
0.125-1.25, .0625
NO.1
0.0620
0.118
0.053
0.066
0.074
0.014
0.0440
0.0480
0.125-1.25, .0625
NO.2
0.0760
0.140
0.062
0.083
0.104
0.017
0.0580
0.0620
0.1875-1.25, .0625
19 - 21
BASIC
DIA
PITCH
DIA
A
Head
Dia
H
Side
Height
O
Total
Height
M
Recess
Dia
N
Recess
Width
P
Point
Dia
S
Point
Length
L
Lengths
NO.3
0.0880
0.161
0.070
0.095
0.112
0.019
0.0680
0.0710
0.25-1.25, .0625
NO.4
0.1000
0.183
0.079
0.107
0.122
0.019
0.0790
0.0830
0.25-1.5, .0625
NO.5
0.1120
0.205
0.088
0.120
0.143
0.027
0.0870
0.1000
0.3125-1.5, .0625
NO.6
0.1215
0.226
0.096
0.132
0.166
0.028
0.0950
0.1000
0.3125-2.5, .0625
NO.8
0.1440
0.270
0.113
0.156
0.182
0.030
0.1120
0.1110
0.375-2.5, .0625
NO.10
0.1650
0.313
0.130
0.180
0.199
0.031
0.1300
0.1250
0.375-3.0, .0625
NO.12
0.1895
0.357
0.148
0.205
0.259
0.034
0.1520
0.1430
0.4375-3.0, .0625
.25
0.2190
0.414
0.170
0.237
0.281
0.036
0.1790
0.1430
0.5-3.0, .0625
.3125
0.2795
0.518
0.211
0.295
0.322
0.042
0.2300
0.1670
0.625-3.0, .0625
.375
0.3445
0.622
0.253
0.355
0.389
0.065
0.2930
0.1670
0.6875-3.0, .0625
.4375
0.3995
0.625
0.265
0.368
0.413
0.068
0.3430
0.2000
0.8125-3.0, .0625
.5
0.4635
0.750
0.297
0.412
0.435
0.071
0.4070
0.2000
0.875-3.0, .0625
Type AB, Type I Cross Recessed Fillister Head
Generic part name: TSRR

Notes:
19 - 22
BASIC
_DIA
PITCH
DIA
A
Head
Dia
H
Side
Height
O
Total
Height
M
Recess
Dia
N
Recess
Width
L
Lengths
NO.0
0.0480
0.096
0.043
0.055
0.067
0.013
0.125-1.25, .0625
NO.1
0.0620
0.118
0.053
0.066
0.074
0.014
0.125-1.25, .0625
NO.2
0.0760
0.140
0.062
0.083
0.104
0.017
0.1875-1.25, .0625
NO.3
0.0880
0.161
0.070
0.095
0.112
0.019
0.25-1.25, .0625
NO.4
0.1000
0.183
0.079
0.107
0.122
0.019
0.25-1.5, .0625
NO.5
0.1120
0.205
0.088
0.120
0.143
0.027
0.3125-1.5, .0625
NO.6
0.1215
0.226
0.096
0.132
0.166
0.028
0.3125-2.5, .0625
NO.8
0.1440
0.270
0.113
0.156
0.182
0.030
0.375-2.5, .0625
NO.10
0.1650
0.313
0.130
0.180
0.199
0.031
0.375-3.0, .0625
NO.12
0.1895
0.357
0.148
0.205
0.259
0.034
0.4375-3.0, .0625
.25
0.2190
0.414
0.170
0.237
0.281
0.036
0.5-3.0, .0625
.3125
0.2795
0.518
0.211
0.295
0.322
0.042
0.625-3.0, .0625
.375
0.3445
0.622
0.253
0.355
0.389
0.065
0.6875-3.0, .0625
.4375
0.3995
0.625
0.265
0.368
0.413
0.068
0.8125-3.0, .0625
.5
0.4635
0.750
0.297
0.412
0.435
0.071
0.875-3.0, .0625
ANSI Inch Tapping

Screws
19 - 23
19 - 24
20
ANSI Inch Woodruff Keys
20 - 1
Full Radius Type, Small Series
Generic part name: KWA

Notes:
20 - 2
Enter the KEY NUMBER value exactly as shown.
KEY
NUMBER
B
Diameter
C
Height
W
Width
202
0.2500
0.1090
0.0625
202.5
0.3125
0.1400
0.0625
302.5
0.3125
0.1400
0.0938
203
0.3750
0.1720
0.0625
303
0.3750
0.1720
0.0938
403
0.3750
0.1720
0.1250
204
0.5000
0.2030
0.0625
304
0.5000
0.2030
0.0938
404
0.5000
0.2030
0.1250
305
0.6250
0.2500
0.9375
405
0.6250
0.2500
0.1250
505
0.6250
0.2500
0.1562
B
Diameter
C
Height
W
Width
605
0.6250
0.2500
0.1875
406
0.7500
0.3130
0.1250
506
0.7500
0.3130
0.1562
606
0.7500
0.3130
0.1875
806
0.7500
0.3130
0.2500
507
0.8750
0.3750
0.1562
607
0.8750
0.3750
0.1875
707
0.8750
0.3750
0.2188
807
0.8750
0.3750
0.2500
608
1.0000
0.4380
0.1875
708
1.0000
0.4380
0.2188
808
1.0000
0.4380
0.2500
1008
1.0000
0.4380
0.3125
1208
1.0000
0.4380
0.3750
609
1.1250
0.4840
0.1875
709
1.1250
0.4840
0.2188
809
1.1250
0.4840
0.2500
1009
1.1250
0.4840
0.3125
610
1.2500
0.5470
0.1875
710
1.2500
0.5470
0.2188
810
1.2500
0.5470
0.2500
1010
1.2500
0.5470
0.3125
1210
1.2500
0.5470
0.3750
811
1.3750
0.5940
0.2500
1011
1.3750
0.5940
0.3125
1211
1.3750
0.5940
0.3750
812
1.5000
0.6410
0.2500
1012
1.5000
0.6410
0.3125
1212
1.5000
0.6410
0.3750
ANSI Inch Woodruff

Keys
KEY
NUMBER
20 - 3
Flat Bottom Type, Small Series
Generic Name: KWB

Notes:
20 - 4
KEY
NUMBER
B
Diameter
C
Height
W
Width
E
Distance
Below Center
202
0.2500
0.1090
0.0625
0.0156
202.5
0.3125
0.1400
0.0625
0.0156
302.5
0.3125
0.1400
0.0938
0.0156
203
0.3750
0.1720
0.0625
0.0156
303
0.3750
0.1720
0.0938
0.0156
403
0.3750
0.1720
0.1250
0.0156
204
0.5000
0.1940
0.0625
0.0469
304
0.5000
0.1940
0.0938
0.0469
404
0.5000
0.1940
0.1250
0.0469
305
0.6250
0.2400
0.0938
0.0625
405
0.6250
0.2400
0.1250
0.0625
B
Diameter
C
Height
W
Width
E
Distance
Below Center
505
0.6250
0.2400
0.1562
0.0625
605
0.6250
0.2400
0.1875
0.0625
406
0.7500
0.3030
0.1250
0.0625
506
0.7500
0.3030
0.1562
0.0625
606
0.7500
0.3030
0.1875
0.0625
806
0.7500
0.3030
0.2500
0.0625
507
0.8750
0.3650
0.1562
0.0625
607
0.8750
0.3650
0.1875
0.0625
707
0.8750
0.3650
0.2188
0.0625
807
0.8750
0.3650
0.2500
0.0625
608
1.0000
0.4280
0.1875
0.0625
708
1.0000
0.4280
0.2188
0.0625
808
1.0000
0.4280
0.2500
0.0625
1008
1.0000
0.4280
0.3125
0.0625
1208
1.0000
0.4280
0.3750
0.0625
609
1.1250
0.4750
0.1875
0.0781
709
1.1250
0.4750
0.2188
0.0781
809
1.1250
0.4750
0.2500
0.0781
1009
1.1250
0.4750
0.3125
0.0781
610
1.1250
0.5370
0.1875
0.0781
710
1.1250
0.5370
0.2187
0.0781
810
1.1250
0.5370
0.2500
0.0781
1010
1.1250
0.5370
0.3125
0.0781
1210
1.1250
0.5370
0.3750
0.0781
811
1.3750
0.5840
0.2500
0.0937
1011
1.3750
0.5840
0.3125
0.0937
1211
1.3750
0.5840
0.3750
0.0937
812
1.5000
0.6310
0.2500
0.1093
1012
1.5000
0.6310
0.3125
0.1093
1212
1.5000
0.6310
0.3750
0.1093
ANSI Inch Woodruff

Keys
KEY
NUMBER
20 - 5
Full Radius Type, Large Series
Generic Name: KWC

Notes:
20 - 6
KEY
NUMBER
B
Diameter
F
Length
C
Height
W
Width
617-1
2.1250
1.3800
0.4060
0.1875
817-1
2.1250
1.3800
0.4060
0.2500
1017-1
2.1250
1.3800
0.4060
0.3125
1217-1
2.1250
1.3800
0.4060
0.3750
617
2.1250
1.7230
0.5310
0.1875
817
2.1250
1.7230
0.5310
0.2500
1017
2.1250
1.7230
0.5310
0.3125
1217
2.1250
1.7230
0.5310
0.3750
822-1
2.7500
2.0000
0.5940
0.2500
1022-1
2.7500
2.0000
0.5940
0.3125
1222-1
2.7500
2.0000
0.5940
0.3750
1422-1
2.7500
2.0000
0.5940
0.4375
KEY
NUMBER
B
Diameter
F
Length
C
Height
W
Width
1622-1
2.7500
2.0000
0.5940
0.5000
822
2.7500
2.3170
0.7500
0.2500
1022
2.7500
2.3170
0.7500
0.3125
1222
2.7500
2.3170
0.7500
0.3750
1422
2.7500
2.3170
0.7500
0.4375
1622
2.7500
2.3170
0.7500
0.5000
1228
3.5000
2.8800
0.9380
0.3750
1428
3.5000
2.8800
0.9380
0.4375
1628
3.5000
2.8800
0.9380
0.5000
1828
3.5000
2.8800
0.9380
0.5625
2028
3.5000
2.8800
0.9380
0.6250
2228
3.5000
2.8800
0.9380
0.6875
2428
3.5000
2.8800
0.9380
0.7500
Flat Bottom Type, Large Series
ANSI Inch Woodruff

Keys
Generic Name: KWD

Notes:
20 - 7
KEY
NUMBER
B
Diameter
F
Length
C
Height
W
Width
E
Distance
Below Center
617-1
2.1250
1.3800
0.3960
0.1875
0.6562
817-1
2.1250
1.3800
0.3960
0.2500
0.6562
1017-1
2.1250
1.3800
0.3960
0.3125
0.6562
1217-1
2.1250
1.3800
0.3960
0.3750
0.6562
617
2.1250
1.7230
0.5210
0.1875
0.5312
817
2.1250
1.7230
0.5210
0.2500
0.5312
1017
2.1250
1.7230
0.5210
0.3125
0.5312
1217
2.1250
1.7230
0.5210
0.3750
0.5312
822-1
2.7500
2.0000
0.5840
0.2500
0.7812
1022-1
2.7500
2.0000
0.5840
0.3125
0.7812
1222-1
2.7500
2.0000
0.5840
0.3750
0.7812
1422-1
2.7500
2.0000
0.5840
0.4375
0.7812
1622-1
2.7500
2.0000
0.5840
0.5000
0.7812
822
2.7500
2.3170
0.7400
0.2500
0.6250
1022
2.7500
2.3170
0.7400
0.3125
0.6250
1222
2.7500
2.3170
0.7400
0.3750
0.6250
1422
2.7500
2.3170
0.7400
0.4375
0.6250
1622
2.7500
2.3170
0.7400
0.5000
0.6250
1228
3.5000
2.8800
0.9280
0.3750
0.8125
1428
3.5000
2.8800
0.9280
0.4375
0.8125
1628
3.5000
2.8800
0.9280
0.5000
0.8125
1828
3.5000
2.8800
0.9280
0.5625
0.8125
2028
3.5000
2.8800
0.9280
0.6250
0.8125
2228
3.5000
2.8800
0.9280
0.6875
0.8125
2428
3.5000
2.8800
0.9280
0.7500
0.8125
20 - 8
Section 3
ANSI Metric Series Part Library
21
ANSI Metric Aerospace
Fasteners
Spline Wrenched Bolts
Generic Part Name: MASB

Notes:
Corresponds to standards SAE MA 1518 and SAE MA 1549.
These parts do not conform to ISO standard.

21 - 1
Name
Nom.
Dia.
&
Thread
Pitch
Wrench
Dash
No.
D
Thd
Dia.
E1
Flange
Dia.
F
Bearing
Dia.
G
Head
Top
Dia.
Shank
Dia.
L
Lengths
MASB01
4X0.7
06
4.00
8.30
7.50
6.00
4.00
18 to 56 by 2
MASB02
5X0.8
07
5.00
9.10
8.30
7.00
5.00
20 to 60 by 2,
64, 68
MASB03
6X1.0
08
6.00
10.60
9.80
8.00
6.00
22 to 58 by 2,
60 to 84 by 4
MASB04
7X1.0
09
7.00
12.10
11.30
9.00
7.00
24 to 58 by 2,
60 to 96 by 4
MASB05
8X1.0
10
8.00
13.60
12.80
10.00
8.00
26 to 58 by 2,
60 to 140 by 4
MASB06
10X1.25
12
10.00
16.70
15.70
12.00
10.00
32 to 58 by 2,
60 to 140 by 4
MASB07
12X1.25
14
12.00
19.90
18.80
14.00
12.00
36 to 58 by 2,
60 to 168 by 4
Hexagon Head Bolts
Generic Part Name: MAHB

Notes:
21 - 2

Name
Nom.
Dia. &
Thread
Pitch
D
Thread
Dia.
Shank
Dia.
Af
Flat
Width
K
Head
Height
F
Bearing
Dia.
L
Lengths
MAHB01
M3X0.5
3.00
3.00
7.00
3.40
6.40
14 to 42 by 2
MAHB02
M4X0.7
4.00
4.00
8.00
3.90
7.40
18 to 56 by 2
MAHB03
M5X0.8
5.00
5.00
9.00
3.00
8.30
20 to 60 by 2, 64,
68
MAHB04
M6X1
6.00
6.00
11.00
3.50
10.20
22 to 58 by 2, 60
to 84 by 4
MAHB05
M7X1
7.00
7.00
12.00
4.00
11.20
24 to 58 by 2, 60
to 96 by 4
MAHB06
M8X1
8.00
8.00
14.00
4.50
13.20
26 to 58 by 2, 60
to 112 by 4
MAHB07
M10X1.25
10.00
10.00
17.00
5.00
16.00
32 to 58 by 2, 60
to 140 by 4
MAHB08
M12X1.25
12.00
12.00
19.00
6.00
18.00
36 to 58 by 2, 60
to 168 by 4
MAHB09
M14X1.5
14.00
14.00
22.00
7.00
21.00
40 to 196 by 4
MAHB10
M16X1.5
16.00
16.00
24.00
8.00
23.00
44 to 220 by 4
MAHB11
M18X1.5
18.00
18.00
27.00
9.00
26.00
48 to 252 by 4
MAHB12
M20X1.5
20.00
20.00
30.00
10.00
29.00
52 to 276 by 4
ANSI Metric Aerospace Fasteners
21 - 3
ANSI Metric
Aerospace Fasteners
Spline Drive Nuts
Generic Part Name: MASN

Notes:
Name
Nom. Dia.
&
Thread
Pitch
Wrenc
h
Dash
No.
D
Thrd
Dia.
E
Flng
Dia.
F
Bearin
g
Dia.
K
Head
Hgt
R
Head
Top
Dia.
Ab
Cntrsnk
Dia.
MASN01
5X0.8
07
5.00
9.10
8.30
7.00
7.22
5.80
MASN02
6X1.0
08
6.00
10.60
9.80
8.10
8.26
7.10
MASN03
7X1.0
09
7.00
12.10
11.30
9.10
9.31
8.10
MASN04
8X1.0
10
8.00
13.60
12.80
10.40
10.36
9.10
MASN05
10X1.25
12
10.00
16.70
15.70
13.00
12.44
11.10
MASN06
12X1.25
15
12.00
19.90
18.80
15.00
15.54
13.10
21 - 4
ANSI Metric
Aerospace Fasteners
Plain Hexagon Nuts
Generic Part Name: MAHN

Notes:
Corresponds to standard SAE MA 1518.
These parts do not conform to an ISO standard.
Name
Nom. Dia.
&
Thread
Pitch
D
Thread
Dia.
Af
Flat
Width
K
Nut
Height
F
Bearing
Dia.
H
Washer
Thick.
Ab
Cntrsnk
Dia.
MAHN01
M3X0.5
3.00
7.00
2.40
6.40
0.40
3.80
MAHN02
M4X0.7
4.00
8.00
3.20
7.40
0.50
4.80
MAHN03
M5X0.8
5.00
9.00
4.00
8.30
0.50
5.80
MAHN04
M6X1
6.00
11.00
4.80
10.20
0.50
7.10
MAHN05
M7X1
7.00
12.00
5.60
11.20
0.50
8.10
MAHN06
M8X1
8.00
14.00
6.40
13.20
0.50
9.10
MAHN07
M10X1.25
10.00
17.00
8.00
16.00
0.60
11.10
MAHN08
M12X1.25
12.00
19.00
9.60
18.00
0.60
13.10
MAHN09
M14X1.5
14.00
22.00
11.20
21.00
0.60
15.20
MAHN10
M16X1.5
16.00
24.00
12.80
23.00
0.60
17.20
MAHN11
M18X1.5
18.00
27.00
14.40
26.00
0.60
19.20
MAHN12
M20X1.5
20.00
30.00
16.00
29.00
0.60
21.20
ANSI Metric Aerospace Fasteners
21 - 5
Castellated Nuts
Generic Part Name: MACN

Notes:
Corresponds to standard SAE MA 1518
Name
Nom. Dia.
&
Thread
Pitch
D
Thrd
Dia.
Af
Flat
Width
K
Nut
Hgt
F
Bearing
Dia.
Ab
Cntrsnk
Dia.
G
Head
Top
Dia.
P
Flat
Hgt
MACN01
M4X0.7
4.00
7.00
5.25
6.40
4.80
9.25
3.25
MACN02
M5X0.8
5.00
8.00
6.45
7.40
5.80
9.25
4.00
MACN03
M6X1
6.00
10.00
7.15
9.30
7.10
9.25
4.75
MACN04
M7X1
7.00
11.00
8.35
10.20
8.10
10.25
5.50
MACN05
M8X1
8.00
13.00
9.05
12.20
9.10
11.25
6.25
MACN06
M10X1.25
10.00
17.00
11.35
16.00
11.10
13.25
7.75
MACN07
M12X1.25
12.00
19.00
12.85
18.00
13.10
16.25
9.25
MACN08
M14X1.5
14.00
22.00
15.15
21.00
15.20
18.25
10.75
MACN09
M16X1.5
16.00
24.00
16.65
23.00
17.20
22.25
12.25
MACN10
M18X1.5
18.00
27.00
18.95
26.00
19.20
25.25
13.75
MACN11
M20X1.5
20.00
30.00
20.45
29.00
21.20
28.25
15.25
21 - 6
22
ANSI Metric Hex Nuts
22 - 1
Hex Nuts, Style 1
Generic Part Name: MHN1

Notes:
22 - 2
Corresponds to standard ANSI B18 2.4 1M-1979(1989).
Name
Nominal
Nut Dia. &
Thread
Pitch
Nominal
Dia.
S
Width
Across
Flats
M
Nut
Thickness
MHN101
M1.6X0.35
1.60
3.20
1.30
MHN102
M2X0.4
2.00
4.00
1.60
MHN103
M2.5X0.45
2.50
5.00
2.00
MHN104
M3X0.5
3.00
5.50
2.40
MHN105
M3.5X0.6
3.50
6.00
2.80
MHN106
M4X0.7
4.00
7.00
3.20
MNH107
M5X0.8
5.00
8.00
4.70
MHN108
M6X1
6.00
10.00
5.20
MHN109
M8X1.25
8.00
13.00
6.80
MHN110
M10X1.5
10.00
16.00
8.40
MHN111
M12X1.75
12.00
18.00
10.80
MHN112
M14X2
14.00
21.00
12.80
MHN113
M16X2
16.00
24.00
14.80
MHN114
M20X2.5
20.00
30.00
18.00
MHN115
M24X3
24.00
36.00
21.50
Nominal
Nut Dia. &
Thread
Pitch
Nominal
Dia.
S
Width
Across
Flats
M
Nut
Thickness
MHN116
M30X3.5
30.00
46.00
25.60
MHN117
M36X4
36.00
55.00
31.00
Name
Hex Nuts, Style 2
Generic Part Name: MHN2

Notes:
Name
Nominal Nut
Dia. & Thread
Pitch
Nominal
Dia.
S
Width Across
Flats
M
Nut
Thickness
MHN201
M3X0.5
3.00
5.50
2.90
MHN202
M3.5X0.6
3.50
6.00
3.30
MHN203
M4X0.7
4.00
7.00
3.80
MNH204
M5X0.8
5.00
8.00
5.10
MHN205
M6X1
6.00
10.00
5.70
MHN206
M8X1.25
8.00
13.00
7.50
MHN207
M10X1.5
10.00
16.00
9.30
MHN208
M12X1.75
12.00
18.00
12.00
22 - 3
Name
Nominal Nut
Dia. & Thread
Pitch
Nominal
Dia.
S
Width Across
Flats
M
Nut
Thickness
MHN209
M14X2
14.00
21.00
14.10
MHN210
M16X2
16.00
24.00
16.40
MHN211
M20X2.5
20.00
30.00
20.30
MHN212
M24X3
24.00
36.00
23.90
MHN213
M30X3.5
30.00
46.00
28.60
MHN214
M36X4
36.00
55.00
34.70
Slotted Hex Nuts
Generic Part Name: MSHN

Notes:
Name
Nominal
Nut Dia.
& Thread
Pitch
Nominal
Dia.
S
Width
Across
Flats
M
Thick
ness
F
Unslotted
Thickness
N
Width
Of Slot
MSHN01
M5X0.8
5.00
8.00
5.10
3.20
2.00
22 - 4
Nominal
Nut Dia.
& Thread
Pitch
Nominal
Dia.
S
Width
Across
Flats
M
Thick
ness
F
Unslotted
Thickness
N
Width
Of Slot
MSHN02
M6X1
6.00
10.00
5.70
3.50
2.40
MSHN03
M8X1.25
8.00
13.00
7.50
4.40
2.90
MSHN04
M10X1.5
10.00
16.00
9.30
5.20
3.40
MSHN05
M12X1.75
12.00
18.00
12.00
7.30
4.00
MSHN06
M14X2
14.00
21.00
14.10
8.60
4.30
MSHN07
M16X2
16.00
24.00
16.40
9.90
5.30
MSHN08
M20X2.5
20.00
30.00
20.30
13.30
5.70
MSHN09
M24X3
24.00
36.00
23.90
15.40
6.70
MSHN10
M30X3.5
30.00
46.00
28.60
18.10
8.50
MSHN11
M36X4
36.00
55.00
34.70
23.70
8.50
Name
Hex Flange Nuts
Generic Part Name: MHFN

Notes:
22 - 5
Name
Nominal
Nut Dia.
&
Thread
Pitch
Nom.
Dia.
S
Width
Across
Flats
M
Thick
DC
Flange
Dia.
C
Flange
Edge
Thick.
R
Flange
Edge
Thick.
MHFN01
M5X0.8
5.00
8.00
5.00
11.80
1.00
0.30
MHFN02
M6X1
6.00
10.00
6.00
14.20
1.10
0.40
MHFN03
M8X1.25
8.00
13.00
8.00
17.90
1.20
0.50
MHFN04
M10X1.5
10.00
16.00
10.00
21.80
1.50
0.60
MHFN05
M12X1.75
12.00
18.00
12.00
26.00
1.80
0.70
MHFN06
M14X2
14.00
21.00
14.00
29.90
2.10
0.90
MHFN07
M16X2
16.00
24.00
16.00
34.50
2.40
1.00
MHFN08
M20X2.5
20.00
30.00
20.00
42.80
3.00
1.20
Hex Jam Nuts
Generic Part Name: MHJN

Notes:
22 - 6
Nominal
Nut Dia. &
Thread
Pitch
Nominal
Dia.
S
Width
Across
Flats
M
Thickness
MHJN01
M5X0.8
5.00
8.00
2.70
MHJN02
M6X1
6.00
10.00
3.20
MHJN03
M8X1.25
8.00
13.00
4.00
MHJN04
M10X1.5
10.00
16.00
5.00
MHJN05
M12X1.75
12.00
18.00
6.00
MHJN06
M14X2
14.00
21.00
7.00
MHJN07
M16X2
16.00
24.00
8.00
MHJN08
M20X2.5
20.00
30.00
10.00
MHJN09
M24X3
24.00
36.00
12.00
MHJN10
M30X3.5
30.00
46.00
15.00
MHJN11
M36X4
36.00
55.00
18.00
Name
Heavy Hex Nuts
22 - 7
Generic Part Name: MHHN

Notes:
22 - 8
Name
Nominal
Nut Dia. &
Thread
Pitch
Nominal
Dia.
S
Width
Across
Flats
M
Thickness
MHHN01
M12X1.75
12.00
21.00
12.30
MHHN02
M14X2
14.00
24.00
14.30
MHHN03
M16X2
16.00
27.00
17.10
MHHN04
M20X2.5
20.00
34.00
20.70
MHHN05
M22X2.5
22.00
36.00
23.60
MHHN06
M24X3
24.00
41.00
24.20
MHHN07
M27X3
27.00
46.00
27.60
MHHN08
M30X3.5
30.00
50.00
30.70
MHHN09
M36X4
36.00
60.00
36.60
MHHN10
M42X4.5
42.00
70.00
42.00
MHHN11
M48X5
48.00
80.00
48.00
MHHN12
M56X5.5
56.00
90.00
56.00
MHHN13
M64X6
64.00
100.00
64.00
MHHN14
M72X6
72.00
110.00
72.00
MHHN15
M80X6
80.00
120.00
80.00
MHHN16
M90X6
90.00
135.00
90.00
MHHN17
M100X6
100.00
150.00
100.00
23
ANSI Metric Hex Cap Screws
23 - 1
Hex Cap Screws
Generic Part Name: MHCS

Notes:
Corresponds to standard ANSI B18.2.3.1M-1979.

as from to incremented by
.
Name
Nom.
Dia.
&
Thread
Pitch
D
Thread
Dia.
DS
Body
Dia.
S
Flat
Width
K
Head
Hgt
L
Length
MHCS01
M5X0.8
5.00
5.00
8.00
3.65
8.00 to 16.00 by 2,
20.00 to 50.00 by 5
MHCS02
M6X1
6.00
6.00
10.00
4.15
10.00 to 16.00 by 2,
20.00 to 50.00 by 5,
60.00
MHCS03
M8X1.25
8.00
8.00
13.00
5.50
14.00, 16.00, 20.00 to

50.00 by 5, 60.00,
70.00, 80.00
MHCS04
M10X1.5
10.00
10.00
16.00
6.63
16.00, 20.00 to 50.00

by 5,
60.00 to 100.00 by 10
23 - 2
Nom.
Dia.
&
Thread
Pitch
D
Thread
Dia.
DS
Body
Dia.
S
Flat
Width
K
Head
Hgt
L
Length
MHCS05
M12X1.75
12.00
12.00
18.00
7.76
20.00 to 50.00 by 5,
60.00 to 130.00 by 10
MHCS06
M14X2
14.00
14.00
21.00
9.09
20.00 to 50.00 by 5,
60.00 to 140.00 by 10
MHCS07
M16X2
16.00
16.00
24.00
10.32
25.00 to 50.00 by 5,
60.00 to 160.00 10
MHCS08
M20X2.5
20.00
20.00
30.00
12.88
30.00 to 50.00 by 5,
60.00 to 160.00 by 10,
180.00, 200.00
MHCS09
M24X3
24.00
24.00
36.00
15.44
35.00 to 50.00 by 5,
60.00 to 160.00 by 10,
180.00 to 300.00 by 20
MHCS10
M30X3.5
30.00
30.00
46.00
19.48
40.00, 45.00, 50. 00,

60.00 to 160.00 by 10,
180.00 to 300.00 by 20
MHCS11
M36X4
36.00
36.00
55.00
23.38
50.00 to 160.00 by 10,

180.00 to 300.00 by 20
MHCS12
M42X4.5
42.00
42.00
65.00
26.97
60.00 to 160.00 by 10,

180.00 to 300.00 by 20
MHCS13
M48X5
48.00
48.00
75.00
31.07
70.00 to 160.00 by 10,

180.00 to 300.00 by 20
MHCS14
M56X5.5
56.00
56.00
85.00
36.20
80.00 to 160.00 by 10,

180.00 to 300.00 by 20
MHCS15
M64X6
64.00
64.00
95.00
41.32
90.00 to 160.00 by 10,

180.00 to 300.00
MHCS16
M72X6
72.00
72.00
105.00
46.45
100.00 to 160.00 by
10, 180.00 to 300.00
by 20
MHCS17
M80X6
80.00
80.00
115.00
51.58
110.00 to 160.00 by
10, 180.00 to 300.00
by 20
MHCS18
M90X6
90.00
90.00
130.00
57.74
120.00 to 160.00 by
10, 180.00 to 300.00
by 20
23 - 3
ANSI Metric Hex Cap

Screws
Name
Name
Nom.
Dia.
&
Thread
Pitch
D
Thread
Dia.
DS
Body
Dia.
S
Flat
Width
K
Head
Hgt
L
Length
MHCS19
M100X6
100.00
100.00
145.00
63.90
130.00 to 160.00 by
10, 180.00 to 300.00
by 20
Formed Hex Screws
Generic Part Name: MFHS

Notes:
Corresponds to standard ANSI/ASME B18.2.3.2M - 1979.

as from to incremented by
.
Name
Nom. Dia.
&
Thread
Pitch
D
Thread
Dia.
Ds
Body
Dia.
S
Flat
Width
K
Head
Hgt
L
Length
MFHS01
M5X0.8
5.00
5.00
8.00
3.65
8.00 to 16.00 by 2,
20 to 50 by 5
23 - 4
Nom. Dia.
&
Thread
Pitch
D
Thread
Dia.
Ds
Body
Dia.
S
Flat
Width
K
Head
Hgt
L
Length
MFHS02
M6X1
6.00
6.00
10.00
4.15
10.00 to 16.00 by 2,
20.00 to 50.00 by 5,
60.00
MFHS03
M8X1.25
8.00
8.00
13.00
5.50
12.00, 14.00, 16.00,

20.00 to 50.00 by 5,
60.00, 70.00, 80.00
MFHS04
M10X1.5
10.00
10.00
16.00
6.63
16.00, 20.00 to
50.00 by 5, 60.00 to
100.00 by 10
MFHS05
M12X1.75
12.00
12.00
18.00
7.76
20.00 to 50.00 by 5,
60.00 to 120.00 by
10
MFHS06
M14X2
14.00
14.00
21.00
9.09
20.00 to 50.00 by 5,
60.00 to 140.00 by
10
MFHS07
M16X2
16.00
16.00
24.00
10.32
25.00 to 50.00 by 5,
60.00 to 150.00 by
10
MFHS08
M20X2.5
20.00
20.00
30.00
12.88
30.00 to 50.00 by 5,
60.00 to 150.00 by
10
MFHS09
M24X3
24.00
24.00
36.00
15.44
35.00 to 50.00 by 5,
60.00 to 150.00 by
10
23 - 5
ANSI Metric Hex Cap

Screws
Name
Heavy Hex Screws
Generic Part Name: MHHS

Notes:

Name
Nom.
Dia.
&
Thread
Pitch
D
Thread
Dia.
Ds
Body
Dia.
S
Flat
Width
K
Head
Hgt
L
Length
MHHS01
M12X1.75
12.00
12.00
21.00
7.76
20.00 to 50.00 by 5,
60.00 to 120.00 by 10
MHHS02
M14X2
14.00
14.00
24.00
9.09
20.00 to 50.00 by 5,
60.00 to 140.00 by 10
MHHS03
M16X2
16.00
16.00
27.00
10.325
25.00 to 50.00 by 5,
60.00 to 160.00 by 10
MHHS04
M20X2.5
20.00
20.00
34.00
12.88
30.00 to 50.00 by 5,
60.00 to 160.00 by 10,
180.00, 200.00
23 - 6
Nom.
Dia.
&
Thread
Pitch
D
Thread
Dia.
Ds
Body
Dia.
S
Flat
Width
K
Head
Hgt
L
Length
MHHS05
M24X3
24.00
24.00
41.00
15.44
35.00 to 50.00 by 5,
60.00 to 160.00 by 10,
180.00 to 240.00 by
20
MHHS06
M30X3.5
30.00
30.00
50.00
19.48
40.00, 45.00, 50.00 to

160.00 by 10, 180.00
to 300.00 by 20
MHHS07
M36X4
36.00
36.00
60.00
23.38
50.00 to 160.00 by 10,

180.00 to 300.00 by
20
Hex Flange Screws
Generic Part Name: MHFS

Notes:

23 - 7
ANSI Metric Hex Cap

Screws
Name
Name
Nominsl
Dia.
&
Thread
Pitch
D
Thread
Dia.
Ds
Body
Dia.
S
Flat
Width
K
Head
Hgt
Dc
Flange
Dia.
L
Length
MHFS01
M5X0.8
5.00
5.00
7.00
5.60
11.40
8.00 to 16.00
by 2, 20.00 to
50.00 by 5
MHFS02
M6X1
6.00
6.00
8.00
6.80
13.60
10.00 to
16.00 by 2,
20.00 to
50.00 by 5,
60.00
MHFS03
M8X1.25
8.00
8.00
10.00
8.50
17.00
12.00, 14.00,
16.00, 20.00
to 50.00 by 5,
60.00, 70.00,
80.00
MHFS04
M10X1.5
10.00
10.00
13.00
9.70
20.80
16.00, 20.00
to 50.00 by 5,
60.00 to
100.00 by 10
MHFS05
M12X1.75
12.00
12.00
15.00
11.90
24.70
20.00 to
50.00 by 5,
60.00 to
120.00 by 10
MHFS06
M14X2
14.00
14.00
18.00
12.90
28.60
20.00 to
50.00 by 5,
60.00 to
140.00 by 10
MHFS07
M16X2
16.00
16.00
21.00
15.10
32.80
25.00 to
50.00 by 5,
60.00 to
150.00 by 10
23 - 8
Hex Bolts
Notes:

Name
Nominal
Dia. &
Thread
Pitch
D
Thread
Dia.
Ds
Body
Dia.
S
Flat
Width
K
Head
Height
L
Length
MHB01
M5X0.8
5.00
5.00
8.00
3.88
55.00 to 80.00 by 5,
90.00 to 160.00 by 10,
180.00 to 260.00 by 20,
300.00
MHB02
M6X16.00
6.00
10.00
4.38
0.30
65.00 to 60.00 by 5,
90.00 to 160.00 by 10,
180.00 to 260.00 by 20,
300.00
MHB03
M8X1.25
8.00
8.00
13.00
5.68
90.00 to 160.00 by 10,

180.00 to 260.00 by 20,
300.00
MHB04
M10X1.5
10.00
10.00
16.00
6.85
110.00 to 160.00 by 10,

180.00 to 260.00 by 20,
300.00
23 - 9
ANSI Metric Hex Cap

Screws
Generic Part Name: MHB
Name
Nominal
Dia. &
Thread
Pitch
D
Thread
Dia.
Ds
Body
Dia.
S
Flat
Width
K
Head
Height
L
Length
MHB05
M12X1.75
12.00
12.00
18.00
7.95
130.00 to 160.00 by 10,

180.00 to 260.00 by 20,
300.00
MHB06
M14X2
14.00
14.00
21.00
9.25
150.00, 160.00, 180.00

to 260.00 by 20, 300.00
MHB07
M16X2
16.00
16.00
24.00
10.75
160.00, 180.00, 200.00,

220.00, 240.00, 260.00,
300.00
MHB08
M20X2.5
20.00
20.00
30.00
13.40
160.00, 180.00, 200.00,

220.00, 240.00, 260.00,
300.00
MHB09
M24X3
24.00
24.00
36.00
15.90
160.00, 180.00, 200.00,

220.00, 240.00, 260.00,
300.00
MHB10
M30X3.5
30.00
30.00
46.00
19.75
60.00 to 80.00 by 5,
90.00 to 160.00 by 10,
180.00 to 260.00 by 20,
300.00
MHB11
M36X4
36.00
36.00
55.00
23.55
70.00, 75.00, 80.00,

90.00 to 160.00 by 10,
180.00 to 260.00 by 20,
300.00
MHB12
M42X4.5
42.00
42.00
65.00
27.05
90.00 to 160.00 by 10,

180.00 to 260.00 by 20,
300.00
MHB13
M48X5
48.00
48.00
75.00
31.07
100.00 to 160.00 by 10,

180.00 to 260.00 by 20,
300.00
MHB14
M56X5.5
56.00
56.00
85.00
36.20
120.00 to 160.00 by 10,

180.00 to 260.00 by 20,
300.00
MHB15
M64X6
64.00
64.00
95.00
41.32
130.00 to 160.00 by 10,

180.00 to 260.00 by 20,
300.00
MHB16
M72X6
72.00
72.00
105.00
46.45
150.00, 160.00, 180.00

to 260.00 by 20, 300.00
23 - 10
Name
Nominal
Dia. &
Thread
Pitch
D
Thread
Dia.
Ds
Body
Dia.
S
Flat
Width
K
Head
Height
L
Length
MHB17
M80X6
80.00
80.00
115.00
51.58
160.00 to 260.00 by 20,

300.00
MHB18
M90X6
90.00
90.00
130.00
57.74
180.00 to 260.00 by 20,

300.00
MHB19
M100X6
100.00
100.00
145.00
63.90
200.00 to 260.00 by 20,

300.00
ANSI Metric Hex Cap
Screws
Heavy Hex Bolts
Generic Part Name: MHHB

Notes:
Corresponds to standard ANSI/ASME B18.2.3.6M - 1979

(1989).

23 - 11
Name
Nominal
Dia. &
Thread
Pitch
D
Thread
Dia.
Ds
Body
Dia.
S
Flat
Width
K
Head
Height
L
Length
MHHB01
M12X1.75
12.00
12.00
21.00
7.95
130 to 160 by 10,

180 to 260 by 20,
300
MHHB02
M14X2
14.00
14.00
24.00
9.25
150, 160 to 260

by 20, 300
MHHB03
M16X2
16.00
16.00
27.00
10.75
160 to 260 by 20,

300
MHHB04
M20X2.5
20.00
20.00
34.00
13.40
160 to 260 by 20,

300
MHHB05
M24X3
24.00
24.00
41.00
15.90
160 to 260 by 20,

300
MHHB06
M30X3.5
30.00
30.00
50.00
19.75
70, 75, 80 to 160

by 10, 180 to 260
by 20, 300
MHHB07
M36X4
36.00
36.00
60.00
23.55
80 to 160 by 10,
180 to 260 by 20,
300
Heavy Hex Structural Bolts
23 - 12
Generic Part Name: MHSB

Notes:
Corresponds to standard ANSI/ASME N18.2.3.7M - 1979

(1989).

Nominal
Dia.&
Thread
Pitch
D
Thr.
Dia.
Ds
Body
Dia.
S
Flat
Width
K
Head
Ht
L
Length
MHSB01
M16X2
16.00
16.00
27.00
10.75
45 to 100 by 5,
110 to 300 by 10
MHSB02
M20X2.5
20.00
20.00
34.00
13.40
50 to 100 by 5,
110 to 300 by 10
MHSB03
M22X2.5
22.00
22.00
36.00
14.90
55 to 100 by 5,
110 to 300 by 10
MHSB04
M24X3
24.00
24.00
41.00
15.90
60 to 100 by 5,
110 to 300 by 10
MHSB05
M27X3
27.00
27.00
46.00
17.90
65 to 100 by 5,
110 to 300 by 10
MHSB06
M30X3.5
30.00
30.00
50.00
19.75
70 to 100 by 5,
110 to 300 by 10
MHSB07
M36X4
36.00
36.00
60.00
23.55
80 to 100 by 5,
110 to 300 by 10
23 - 13
ANSI Metric Hex Cap

Screws
Name
Hex Lag Screws
Generic Part Name: MHLS

Notes:
Corresponds to standard ANSI/ASME 18.2.3.8M - 1981.

Name
D
Nom.
Dia.
Ds
Body
Dia.
S
Flat
Width
K
Head
Height
P
Thread
Pitch
D1
Thread
Root
Dia.
L
Length
MHLS01
5.00
5.00
8.00
3.90
2.300
3.200
8 to 16 by 2,
20 to 50 by 5
MHLS02
6.00
6.00
10.00
4.40
2.500
4.000
10 to 16 by 2,
20 to 50 by 5,
60
MHLS03
8.00
8.00
13.00
5.70
2.800
5.800
12, 14, 16,

20 to 50 by 5,
60
MHLS04
10.00
10.00
16.00
6.90
3.600
7.200
16, 20 to 50
by 5, 60 to
100 by 10
MHLS05
12.00
12.00
18.00
8.00
4.200
8.700
20 to 50 by 5,
60 to 120 by
10
23 - 14
D
Nom.
Dia.
Ds
Body
Dia.
S
Flat
Width
K
Head
Height
P
Thread
Pitch
D1
Thread
Root
Dia.
L
Length
MHLS06
16.00
16.00
24.00
10.80
5.100
12.000
25 to 50 by 5,
60 to 160 by
10
MHLS07
20.00
20.00
30.00
13.40
5.600
15.600
30 to 50 by 5,
60 to 160 by
10, 180, 200
MHLS08
24.00
24.00
36.00
15.90
7.300
18.100
35 to 50 by 5,
60 to 160 by
10, 180 to
300 by 20
Heavy Hex Flange Screws
Generic Part Name: MHHF

Notes:
Corresponds to standard ANSI/ASME 18.2.3.9M - 1984.

23 - 15
ANSI Metric Hex Cap

Screws
Name
Name
Nominal
Dia. &
Thread
Pitch
D
Thread
Dia.
Ds
Body
Dia.
S
Flat
Width
K
Head
Hght
Dc
Flange
Dia.
L
Length
MHHF01
M10X1.5
10.00
10.00
15.00
8.60
22.30
16,
20 to 50 by 5,
60 to 100 by 10
MHHF02
M12X1.75
12.00
12.00
18.00
10.40
26.60
20 to 50 by 5,
60 to 120 by 10
MHHF03
M14X2
14.00
14.00
21.00
12.40
30.50
20 to 50 by 5,
60 to 140 by 10
MHHF04
M16X2
16.00
16.00
24.00
14.10
35.00
25 to 50 by 5,
60 to 150 by 10
MHHF05
M20X2.5
20.00
20.00
30.00
17.70
43.00
30 to 50 by 5,
60 to 150 by 10
23 - 16
24
ANSI Metric Machine Screws
24 - 1
Generic Part Name: MSMS

Notes:
Corresponds to standard ANSI/ASME B18.6.7M - 1985.

Name
Nominal
Dia. &
Thread
Pitch
Nom.
Thd
Dia.
Ds
Body
Dia.
Dk
Head
Dia.
N
Slot
Width
T
Slot
Depth
L
Length
MSMS01
M2X0.4
2.00
2.00
4.40
0.70
0.60
3, 4, 5, 6, 8,
10, 13, 16, 20
MSMS02
M2.5X0.45
2.50
2.50
5.50
0.80
0.70
4, 5, 6, 8, 10,
13, 16, 20, 25
MSMS03
M3X0.5
3.00
3.00
6.30
1.00
0.90
5, 6, 8, 10,
13, 16, 20,
25, 30
MSMS04
M3.5X0.6
3.50
3.50
8.20
1.20
1.20
6, 8, 10, 13,
16, 20 to 35
by 5
MSMS05
M4X0.7
4.00
4.00
9.40
1.50
1.30
6, 8, 10, 13,
16, 20, 20 to
40 by 5
24 - 2
Name
Nominal
Dia. &
Thread
Pitch
Nom.
Thd
Dia.
Ds
Body
Dia.
Dk
Head
Dia.
N
Slot
Width
T
Slot
Depth
L
Length
MSMS06
M5X0.8
5.00
5.00
10.00
1.50
1.40
8, 10, 13, 16,

20 to 50 by 5
MSMS07
M6X1
6.00
6.00
12.60
1.90
1.60
8, 10, 13, 16,

20 to 60 by 5
MSMS08
M8X1.25
8.00
8.00
17.30
2.30
2.30
10, 13, 16,

20 to 70 by 5,
80
MSMS09
M10X1.5
10.00
10.00
20.00
2.80
2.60
13, 16, 20 to
70 by 5, 80,
90
ANSI Metric Machine

Screws
Type 1 Cross Recessed Flat Countersunk

Head
Generic Part Name: MCMS

Notes:

24 - 3
Name
Nominal
Dia. &
Thread
Pitch
Nominal
Thread
Dia.
Ds
Body
Dia.
Dk
Head
Dia.
M
Recess
Dia.
L
Length
MCMS01
M2X0.4
2.00
2.00
4.40
2.31
3, 4, 5, 6, 8, 10,
13, 16, 20
MCMS02
M2.5X0.45
2.50
2.50
5.50
2.97
4, 5, 6, 8, 10, 13,
16, 20, 25
MCMS03
M3X0.5
3.00
3.00
6.30
3.27
5, 6, 8, 10, 13,
16, 20, 25, 30
MCMS04
M3.5X0.6
3.50
3.50
8.20
4.22
6, 8, 10, 13, 16,

20 to 35 by 5
MCMS05
M4X0.7
4.00
4.00
9.40
4.62
6, 8, 10, 13, 16,

20, 20 to 40 by 5
MCMS06
M5X0.8
5.00
5.00
10.40
5.22
8, 10, 13, 16, 20

to 50 by 5
MCMS07
M6X1
6.00
6.00
12.60
6.79
8, 10, 13, 16, 20

to 60 by 5
MCMS08
M8X1.25
8.00
8.00
17.30
8.95
10, 13, 16, 20 to

70 by 5, 80
MCMS09
M10X1.5
10.00
10.00
20.00
10.05
13, 16, 20 to 70
by 5, 80, 90
24 - 4
Generic Part Name: MOMS

Note:

Nominal
Dia. &
Thread
Pitch
Nom.
Thread
Dia.
Ds
Body
Dia.
Dk
Head
Dia.
N
Slot
Width
T
Slot
Depth
L
Length
MOMS01
2X0.4
2.00
2.00
4.40
0.70
1.00
3, 4, 5, 6, 8,
10, 13, 16,
20
MOMS02
2.5X0.45
2.50
2.50
5.50
0.80
1.20
4, 5, 6, 8, 10,
13, 16, 20,
25
MOMS03
3X0.5
3.00
3.00
6.30
1.00
1.50
5, 6, 8, 10,
13, 16, 20,
25, 30
MOMS04
3.5X0.6
3.50
3.50
8.20
1.20
1.70
6, 8, 10, 13,
16, 20 to 35
by 5
MOMS05
4X0.7
4.00
4.00
9.40
1.50
1.90
6, 8, 10, 13,
16, 20, 20 to
40 by 5
MOMS06
5X0.8
5.00
5.00
10.40
1.50
2.40
8, 10, 13,
16, 20 to 50
by 5
MOMS07
6X1
6.00
6.00
12.60
1.90
2.80
8, 10, 13,
16, 20 to 60
by 5
MOMS08
8X1.25
8.00
8.00
17.30
2.30
3.70
10, 13, 16,

20 to 70 by
5, 80
MOMS09
10X1.5
10.00
10.00
20.00
2.80
4.40
13, 16, 20 to
70 by 5, 80,
90
24 - 5
ANSI Metric Machine

Screws
Name
Type 1 Cross Recessed Oval Countersunk

Head
Generic Part Name: MRMS

Notes:

Name
Nominal
Dia. &
Thread
Pitch
Nom.
Thread
Dia.
Ds
Body
Dia.
Dk
Head
Dia.
M
Recess
Dia.
L
Length
MRMS01
2X0.4
2.00
2.00
4.40
2.52
3, 4, 5, 6, 8, 10,
13, 16, 20
MRMS02
2.5X0.45
2.50
2.50
5.50
3.22
4, 5, 6, 8, 10, 13,
16, 20, 25
MRMS03
3X0.5
3.00
3.00
6.30
3.61
5, 6, 8, 10, 13,
16, 20, 25, 30
MRMS04
3.5X0.6
3.50
3.50
8.20
4.54
6, 8, 10, 13, 16,

20 to 35 by 5
MRMS05
4X0.7
4.00
4.00
9.40
5.09
6, 8, 10, 13, 16,

20, 20 to 40 by 5
MRMS06
5X0.8
5.00
5.00
10.40
5.82
8, 10, 13, 16, 20

to 50 by 5
24 - 6
Name
Nominal
Dia. &
Thread
Pitch
Nom.
Thread
Dia.
Ds
Body
Dia.
Dk
Head
Dia.
M
Recess
Dia.
L
Length
MRMS07
6X1
6.00
6.00
12.60
7.47
8, 10, 13, 16, 20

to 60 by 5
MRMS08
8X1.25
8.00
8.00
17.30
10.02
10, 13, 16, 20 to

70 by 5, 80
MRMS09
10X1.5
10.00
10.00
20.00
11.41
13, 16, 20 to 70
by 5, 80, 90
Slotted Pan Head

ANSI Metric Machine
Screws
Generic Part Name: MPMS

Notes:

24 - 7
Name
Nominal
Dia. &
Thread
Pitch
Nom.
Thr.
Dia.
Ds
Body
Dia
Dk
Head
Dia
K
Head
Ht.
T
Slot
Depth
N
Slot
Wdth
L
Length
MPMS01
M2X0.4
2.00
2.00
4.00
1.30
0.50
0.70
2.5, 3,
4, 5, 6,
8, 10,
13, 16
MPMS02
M2.5X0.45
2.50
2.50
5.00
1.50
0.60
0.80
3, 4, 5,
6, 8,
10, 13,
16, 20,
25
MPMS03
M3X0.5
3.00
3.00
5.60
1.80
0.70
1.00
4, 5, 6,
8, 10,
13, 16,
20, 25,
30
MPMS04
M3.5X0.6
3.50
3.50
7.00
2.10
0.80
1.20
5, 6, 8,
10, 13,
16, 20
to 35
by 5
MPMS05
M4X0.7
4.00
4.00
8.00
2.40
1.00
1.50
5, 6, 8,
10, 13,
16, 20
to 40
by 5
MPMS06
M5X0.8
5.00
5.00
9.50
3.00
1.20
1.50
6, 8,
10, 13,
16, 20
to 50
by 5
MPMS07
M6X1
6.00
6.00
12.00
3.60
1.40
1.90
8, 10,
13, 16,
20 to
60 by 5
24 - 8
Name
Nominal
Dia. &
Thread
Pitch
Nom.
Thr.
Dia.
Ds
Body
Dia
Dk
Head
Dia
K
Head
Ht.
T
Slot
Depth
N
Slot
Wdth
L
Length
MPMS08
M8X1.25
8.00
8.00
16.00
4.80
1.90
2.30
10, 13,
16, 20
to 70
by 5,
80
MPMS09
M10X1.5
10.00
10.00
20.00
6.00
2.40
2.80
13, 16,
20 to
70 by
5, 80,
90
ANSI Metric Machine

Screws
Type 1 Cross Recessed Pan Head
Generic Part Name: MTMS

Notes:

24 - 9
Name
Nominal
Dia. &
Thread
Pitch
Nom.
Thr.
Dia.
Dk
Head
Dia.
K
Head
Ht
Ds
Body
Dia.
M
Recess
Dia.
L
Length
MTMS01
M2X0.4
2.00
4.00
1.60
2.00
1.99
2.5, 3, 4, 5, 6, 8,
10, 13, 16
MTMS02
Mt2.5X0.45
2.50
5.00
2.10
2.50
2.85
3, 4, 5, 6, 8, 10,
13, 16, 20, 25
MTMS03
M3X0.5
3.00
5.60
2.40
3.00
3.06
4, 5, 6, 8, 10,
13, 16, 20, 25,
30
MTMS04
M3.5X0.6
3.50
7.00
2.60
3.50
4.08
5, 6, 8, 10, 13,
16, 20 to 35 by
5
MTMS05
M4X0.7
4.00
8.00
3.10
4.00
4.57
5, 6, 8, 10, 13,
16, 20 to 40 by
5
MTMS06
M5X0.8
5.00
9.50
3.70
5.00
5.07
6, 8, 10, 13, 16,

20 to 50 by 5
MTMS07
M6X1
6.00
12.00
4.60
6.00
7.09
8, 10, 13, 16, 20

to 60 by 5
MTMS08
M8X1.25
8.00
16.00
6.00
8.00
9.18
10, 13, 16, 20

to 70 by 5, 80
MTMS09
M10X1.5
10.00
20.00
7.50
10.00
10.35
13, 16, 20 to
70 by 5, 80, 90
24 - 10
Hex Head
Generic Part Name: MHMS

Name
Nominal
Dia. &
Thread
Pitch
Nom.
Thread
Dia.
Ds
Body
Dia.
K
Head
Height
S
Flat
Width
L
Length
MHMS01
M2X0.4
2.00
2.00
1.60
3.20
2.5, 3, 4, 5, 6, 8, 10,
13, 16
MHMS02
M2.5X0.45
2.50
2.50
2.10
4.00
3, 4, 5, 6, 8, 10, 13,
16, 20, 25
MHMS03
M3X0.5
3.00
3.00
2.30
5.00
4, 5, 6, 8, 10, 13,
16, 20, 25, 30
MHMS04
M3.5X0.6
3.50
3.50
2.60
5.50
5, 6, 8, 10, 13, 16,

20 to 35 by 5
MHMS05
M4X0.7
4.00
4.00
3.00
7.00
5, 6, 8, 10, 13, 16,

20 to 40 by 5
MHMS06
M5X0.8
5.00
5.00
3.80
8.00
6, 8, 10, 13, 16, 20

to 50 by 5
MHMS07
M6X1
6.00
6.00
4.70
10.00
8, 10, 13, 16, 20 to

60 by 5
24 - 11
ANSI Metric Machine

Screws
Notes:
Name
Nominal
Dia. &
Thread
Pitch
Nom.
Thread
Dia.
Ds
Body
Dia.
K
Head
Height
S
Flat
Width
L
Length
MHMS08
M8X1.25
8.00
8.00
6.00
13.00
10, 13, 16, 20 to 70

by 5, 80
MHMS09
M10X1.5
10.00
10.00
7.50
16.00
13, 16, 20 to 70 by
5, 80, 90
MHMS10
M12X1.75
12.00
12.00
9.00
18.00
16, 20 to 70 by 5,
80, 90
Hex Flange Head
Generic Part Name: MFMS

Notes:

Name
Nominal
Dia. &
Thread
Pitch
Nom.
Thread
Dia.
Ds
Body
Dia.
K
Head
Ht
S
Flat
Width
Dc
Flange
Dia.
L
Length
MFMS01
M2X0.4
2.00
2.00
2.20
3.00
4.50
2.5, 3, 4, 5,
6, 8, 10, 13,
16
24 - 12
Nominal
Dia. &
Thread
Pitch
Nom.
Thread
Dia.
Ds
Body
Dia.
K
Head
Ht
S
Flat
Width
Dc
Flange
Dia.
L
Length
MFMS02
M2.5X0.45
2.50
2.50
2.70
3.20
5.40
3, 4, 5, 6, 8,
10, 13, 16,
20, 25
MFMS03
M3X0.5
3.00
3.00
3.20
4.00
6.40
4, 5, 6, 8, 10,
13, 16, 20,
25, 30
MFMS04
M3.5X0.6
3.50
3.50
3.80
5.00
7.50
5, 6, 8, 10,
13, 16, 20 to
35 by 5
MFMS05
M4X0.7
4.00
4.00
4.30
5.50
8.50
5, 6, 8, 10,
13, 16, 20 to
40 by 5
MFMS06
M5X0.8
5.00
5.00
5.40
7.00
10.60
6, 8, 10, 13,
16, 20 to 50
by 5
MFMS07
M6X1
6.00
6.00
6.70
8.00
12.80
8, 10, 13,
16, 20 to 60
by 5
MFMS08
M8X1.25
8.00
8.00
8.60
10.00
16.80
10, 13, 16,

20 to 70 by
5, 80
MFMS09
M10X1.5
10.00
10.00
10.70
13.00
21.00
13, 16, 20 to
70 by 5, 80,
90
MFMS10
M12X1.75
12.00
12.00
13.70
15.00
24.80
16, 20 to 70
by 5, 80, 90
24 - 13
ANSI Metric Machine

Screws
Name
24 - 14
25
ANSI Metric Retaining Rings
25 - 1
Basic External, Series 3AM1
Generic Part Name: MBER

Notes:
Corresponds to standard ANSI/ASME B27.7 - 1977.
Name
Shaft
Dia.
Ring
Series
Size
No.
D
Free
Dia.
T
Ring
Thck.
P
Hole
Dia.
B
Lug
E
Lg.
Sec
J
Sm.
Sec
Sm.
Sec.
Angle
MBER01
4.000
3AM1-4
3.60
0.25
0.60
1.35
0.65
0.40
48.00
MBER02
5.000
3AM1-5
4.55
0.40
0.60
1.40
0.65
0.40
47.00
MBER03
6.000
3AM1-6
5.45
0.40
0.60
1.40
0.75
0.50
46.00
MBER04
7.000
3AM1-7
6.35
0.60
1.00
2.05
0.90
0.60
45.00
MBER05
8.000
3AM1-8
7.15
0.60
1.00
2.20
1.00
0.65
37.00
MBER06
9.000
3AM1-9
8.15
0.60
1.00
2.20
1.15
0.75
36.00
MBER07
10.000
3AM1-10
9.00
0.60
1.00
2.20
1.30
0.80
35.00
MBER08
11.000
3AM1-11
10.00
0.60
1.00
2.20
1.40
0.85
34.00
MBER09
12.000
3AM1-12
10.85
0.60
1.00
2.20
1.50
0.90
33.00
25 - 2
Shaft
Dia.
Ring
Series
Size
No.
D
Free
Dia.
T
Ring
Thck.
P
Hole
Dia.
B
Lug
E
Lg.
Sec
J
Sm.
Sec
Sm.
Sec.
Angle
MBER10
13.000
3AM1-13
11.90
0.90
1.20
2.80
1.60
0.95
33.00
MBER11
14.000
3AM1-14
12.90
0.90
1.20
2.80
1.70
1.00
32.00
MBER12
15.000
3AM1-15
13.80
0.90
1.20
2.80
1.80
1.05
32.00
MBER13
16.000
3AM1-16
14.70
0.90
1.20
2.80
2.05
1.15
31.00
MBER14
17.000
3AM1-17
15.75
0.90
1.20
2.80
2.10
1.15
31.00
MBER15
18.000
3AM1-18
16.65
1.10
1.30
3.45
2.25
1.25
30.00
MBER16
19.000
3AM1-19
17.60
1.10
1.30
3.45
2.35
1.30
30.00
MBER17
20.000
3AM1-20
18.35
1.10
1.30
3.45
2.40
1.35
30.00
MBER18
21.000
3AM1-21
19.40
1.10
1.30
3.45
2.50
1.40
29.00
MBER19
22.000
3AM1-22
20.30
1.10
1.30
3.45
2.70
1.50
29.00
MBER20
23.000
3AM1-23
21.25
1.10
1.30
3.45
2.80
1.60
29.00
MBER21
24.000
3AM1-24
22.20
1.10
1.90
4.20
2.90
1.60
28.00
MBER22
25.000
3AM1-25
23.10
1.10
1.90
4.20
2.90
1.70
28.00
MBER23
26.000
3AM1-26
24.05
1.10
1.90
4.20
3.00
1.70
28.00
MBER24
27.000
3AM1-27
24.95
1.30
1.90
4.60
3.10
1.80
27.00
MBER25
28.000
3AM1-28
25.80
1.30
1.90
4.60
3.20
1.80
27.00
MBER26
30.000
3AM1-30
27.90
1.30
1.90
4.60
3.30
1.80
27.00
MBER27
32.000
3AM1-32
29.60
1.30
1.90
4.60
3.60
1.90
26.00
MBER28
34.000
3AM1-34
31.40
1.30
1.90
4.60
3.80
2.00
26.00
MBER29
35.000
3AM1-35
32.30
1.30
1.90
4.60
3.90
2.10
26.00
MBER30
36.000
3AM1-36
33.25
1.30
1.90
5.40
4.10
2.20
26.00
MBER31
38.000
3AM1-38
35.20
1.30
3.10
5.40
4.30
2.30
24.00
MBER32
40.000
3AM1-40
36.75
1.60
3.10
6.00
4.40
2.30
24.00
MBER33
42.000
3AM1-42
38.80
1.60
3.10
6.00
4.60
2.40
24.00
MBER34
43.000
3AM1-43
39.65
1.60
3.10
6.00
4.70
2.50
24.00
MBER35
45.000
3AM1-45
41.60
1.60
3.10
6.00
4.80
2.60
22.00
MBER36
46.000
3AM1-46
42.55
1.60
3.10
6.00
4.90
2.60
22.00
MBER37
48.000
3AM1-48
44.40
1.60
3.10
6.20
5.00
2.60
22.00
MBER38
50.000
3AM1-50
46.20
1.60
3.10
6.20
5.10
2.70
22.00
MBER39
52.000
3AM1-52
48.40
2.00
3.10
6.80
5.30
2.80
21.00
25 - 3
ANSI Metric
Retaining Rings
Name
Name
Shaft
Dia.
Ring
Series
Size
No.
D
Free
Dia.
T
Ring
Thck.
P
Hole
Dia.
B
Lug
E
Lg.
Sec
J
Sm.
Sec
Sm.
Sec.
Angle
MBER40
54.000
3AM1-54
49.90
2.00
3.10
6.80
5.40
2.90
21.00
MBER41
55.000
3AM1-55
50.60
2.00
3.10
6.80
5.40
2.90
21.00
MBER42
57.000
3AM1-57
52.90
2.00
3.10
6.80
5.60
3.00
21.00
MBER43
58.000
3AM1-58
53.60
2.00
3.10
6.80
5.60
3.00
21.00
MBER44
60.000
3AM1-60
55.80
2.00
3.10
6.80
5.70
3.00
21.00
MBER45
62.000
3AM1-62
57.30
2.00
3.10
6.80
5.80
3.00
21.00
MBER46
65.000
3AM1-65
60.40
2.00
3.10
6.80
6.00
3.10
20.00
MBER47
68.000
3AM1-68
63.10
2.00
3.10
6.80
6.20
3.30
20.00
MBER48
70.000
3AM1-70
64.60
2.40
3.10
7.80
6.30
3.30
20.00
MBER49
72.000
3AM1-72
66.60
2.40
3.10
7.80
6.40
3.30
20.00
MBER50
75.000
3AM1-75
69.00
2.40
3.10
7.80
6.60
3.40
20.00
MBER51
78.000
3AM1-78
72.00
2.40
3.10
7.80
6.60
3.40
18.00
MBER52
80.000
3AM1-80
74.20
2.40
3.10
7.80
7.00
3.60
18.00
MBER53
82.000
3AM1-82
76.40
2.40
3.10
7.80
7.10
3.70
18.00
MBER54
85.000
3AM1-85
78.60
2.40
3.10
7.80
7.30
3.80
18.00
MBER55
88.000
3AM1-88
81.40
2.80
3.10
8.40
7.50
3.90
16.00
MBER56
90.000
3AM1-90
83.20
2.80
3.10
8.40
7.50
3.90
16.00
MBER57
95.000
3AM1-95
88.10
2.80
3.10
8.40
7.90
4.10
16.00
MBER58
100.000
3AM1-100
92.50
2.80
3.10
8.70
8.00
4.10
16.00
25 - 4
Basic Internal, Series 3BM1
Generic Part Name: MBIR

Notes:
Name
Bore
Dia.
Ring
Series
Size
No.
D
Fre
Dia.
T
Ring
Thic
k.
P
Hole
Dia.
B
Lug
E
Large
Sec
J
Small
Sec
MBIR0001
8.000
3BM1-8
8.80
0.40
0.80
1.70
0.85
0.45
MBIR0002
9.000
3BM1-9
10.00
0.60
1.00
2.10
1.25
0.65
MBIR0003
10.000
3BM1-10
11.10
0.60
1.00
2.10
1.30
0.70
MBIR0004
11.000
3BM1-11
12.20
0.60
1.00
2.50
1.30
0.70
MBIR0005
12.000
3BM1-12
13.30
0.60
1.00
2.50
1.35
0.70
MBIR0006
13.000
3BM1-13
14.25
0.90
1.20
2.90
1.35
0.75
MBIR0007
14.000
3BM1-14
15.45
0.90
1.20
3.30
1.60
0.90
MBIR0008
15.000
3BM1-15
16.60
0.90
1.50
3.30
1.65
0.90
MBIR0009
16.000
3BM1-16
17.70
0.90
1.50
3.40
1.70
0.95
25 - 5
ANSI Metric
Retaining Rings
Name
Bore
Dia.
Ring
Series
Size
No.
D
Fre
Dia.
T
Ring
Thic
k.
P
Hole
Dia.
B
Lug
E
Large
Sec
J
Small
Sec
MBIR0010
17.000
3BM1-17
18.90
0.90
1.50
3.40
1.70
0.95
MBIR0011
18.000
3BM1-18
20.05
0.90
1.50
3.60
1.80
1.00
MBIR0012
19.000
3BM1-19
21.10
0.90
1.50
3.60
1.80
1.00
MBIR0013
20.000
3BM1-20
22.25
0.90
1.50
4.00
2.00
1.10
MBIR0014
21.000
3BM1-21
23.30
0.90
1.50
4.00
2.10
1.20
MBIR0015
22.000
3BM1-22
24.40
1.10
1.50
4.00
2.10
1.20
MBIR0016
23.000
3BM1-23
25.45
1.10
1.50
4.00
2.20
1.20
MBIR0017
24.000
3BM1-24
26.55
1.10
1.50
4.00
2.30
1.30
MBIR0018
25.000
3BM1-25
27.75
1.10
1.50
4.00
2.60
1.30
MBIR0019
26.000
3BM1-26
28.85
1.10
1.50
4.00
2.70
1.40
MBIR0020
27.000
3BM1-27
29.95
1.30
1.90
4.60
2.80
1.40
MBIR0021
28.000
3BM1-28
31.10
1.30
1.90
4.60
2.90
1.50
MBIR0022
30.000
3BM1-30
33.40
1.30
1.90
4.60
3.00
1.50
MBIR0023
32.000
3BM1-32
35.35
1.30
1.90
4.60
3.10
1.60
MBIR0024
34.000
3BM1-34
37.75
1.30
1.90
4.60
3.20
1.60
MBIR0025
35.000
3BM1-35
38.75
1.30
1.90
4.60
3.30
1.60
MBIR0026
36.000
3BM1-36
40.00
1.30
1.90
4.60
3.40
1.70
MBIR0027
37.000
3BM1-37
41.05
1.30
1.90
4.60
3.40
1.70
MBIR0028
38.000
3BM1-38
42.15
1.30
1.90
4.60
3.40
1.70
MBIR0029
40.000
3BM1-40
44.25
1.60
1.90
5.10
4.00
2.00
MBIR0030
42.000
3BM1-42
46.60
1.60
1.90
5.80
4.20
2.10
MBIR0031
45.000
3BM1-45
49.95
1.60
1.90
6.00
4.30
2.10
MBIR0032
46.000
3BM1-46
51.05
1.60
2.30
6.00
4.30
2.10
MBIR0033
47.000
3BM1-47
52.15
1.60
2.30
6.00
4.30
2.20
MBIR0034
48.000
3BM1-48
53.30
1.60
2.30
6.00
4.50
2.30
MBIR0035
50.000
3BM1-50
55.35
1.60
2.30
6.00
4.60
2.30
MBIR0036
52.000
3BM1-52
57.90
2.00
2.30
6.40
4.70
2.30
MBIR0037
55.000
3BM1-55
61.10
2.00
2.30
6.70
5.10
2.50
MBIR0038
57.000
3BM1-57
63.25
2.00
2.30
6.90
5.20
2.50
MBIR0039
58.000
3BM1-58
64.40
2.00
2.30
6.90
5.30
2.60
25 - 6
Bore
Dia.
Ring
Series
Size
No.
D
Fre
Dia.
T
Ring
Thic
k.
P
Hole
Dia.
B
Lug
E
Large
Sec
J
Small
Sec
MBIR0040
60.000
3BM1-60
66.80
2.00
2.30
6.90
5.30
2.60
MBIR0041
62.000
3BM1-62
68.60
2.00
2.70
7.10
5.30
2.60
MBIR0042
63.000
3BM1-63
69.90
2.00
2.70
7.10
5.40
2.70
MBIR0043
65.000
3BM1-65
72.20
2.40
2.70
7.40
5.60
2.80
MBIR0044
68.000
3BM1-68
75.70
2.40
2.70
7.60
5.80
2.90
MBIR0045
70.000
3BM1-70
77.50
2.40
2.70
7.60
5.80
2.90
MBIR0046
72.000
3BM1-72
79.60
2.40
2.70
7.60
5.80
2.90
MBIR0047
75.000
3BM1-75
83.30
2.40
2.70
7.90
6.20
3.10
MBIR0048
78.000
3BM1-78
86.80
2.80
3.10
7.90
6.50
3.20
MBIR0049
80.000
3BM1-80
89.10
2.80
3.10
7.90
6.70
3.30
MBIR0050
82.000
3BM1-82
91.10
2.80
3.10
8.70
6.90
3.40
MBIR0051
85.000
3BM1-85
94.40
2.80
3.10
8.70
7.00
3.60
MBIR0052
88.000
3BM1-88
97.90
2.80
3.10
8.70
7.30
3.60
MBIR0053
90.000
3BM1-90
100.00
2.80
3.10
8.70
7.40
3.60
MBIR0054
92.000
3BM1-92
102.20
2.80
3.10
8.70
7.60
3.80
MBIR0055
95.000
3BM1-95
105.60
2.80
3.10
8.70
7.80
3.90
MBIR0056
98.000
3BM1-98
109.00
2.80
3.10
9.40
8.10
4.10
MBIR0057
100.000
3BM1-100
110.70
2.80
3.10
9.40
8.20
4.10
MBIR0058
102.000
3BM1-102
112.20
2.80
3.10
9.40
8.40
4.20
MBIR0059
105.000
3BM1-105
115.80
2.80
3.10
9.40
8.40
4.30
MBIR0060
108.000
3BM1-108
119.20
2.80
3.10
9.50
8.50
4.60
MBIR0061
110.000
3BM1-110
120.80
2.80
3.80
10.30
8.70
4.60
MBIR0062
115.000
3BM1-115
126.00
2.80
3.80
10.30
8.90
4.60
MBIR0063
120.000
3BM1-120
132.40
2.80
3.80
10.30
9.40
4.60
MBIR0064
125.000
3BM1-125
137.10
2.80
3.80
10.30
9.50
4.70
MBIR0065
130.000
3BM1-130
142.50
2.80
3.80
10.30
9.80
4.90
MBIR0066
135.000
3BM1-135
148.50
3.20
3.80
11.60
10.40
5.00
MBIR0067
140.000
3BM1-140
154.10
3.20
3.80
11.60
10.40
5.00
MBIR0068
145.000
3BM1-145
159.50
3.20
3.80
11.60
10.60
5.30
MBIR0069
150.000
3BM1-150
164.50
3.20
3.80
11.60
10.80
5.40
25 - 7
ANSI Metric
Retaining Rings
Name
Name
Bore
Dia.
Ring
Series
Size
No.
D
Fre
Dia.
T
Ring
Thic
k.
P
Hole
Dia.
B
Lug
E
Large
Sec
J
Small
Sec
MBIR0070
155.000
3BM1-155
168.80
3.20
3.80
11.60
10.80
5.40
MBIR0071
160.000
3BM1-160
175.10
4.00
4.60
12.30
10.90
5.40
MBIR0072
165.000
3BM1-165
180.30
4.00
4.60
12.30
11.10
5.60
MBIR0073
170.000
3BM1-170
185.60
4.00
4.60
12.30
11.40
5.60
MBIR0074
175.000
3BM1-175
191.30
4.00
4.60
13.50
11.60
5.70
MBIR0075
180.000
3BM1-180
196.60
4.00
4.60
13.50
12.00
5.90
MBIR0076
185.000
3BM1-185
202.70
4.80
4.60
14.20
12.40
6.00
MBIR0077
190.000
3BM1-190
207.70
4.80
4.60
14.20
12.90
6.30
MBIR0078
200.000
3BM1-200
217.80
4.80
4.60
14.20
13.30
6.50
MBIR0079
210.000
3BM1-210
230.30
4.80
4.60
15.20
14.20
6.90
MBIR0080
220.000
3BM1-220
240.50
4.80
4.60
16.80
15.00
7.30
MBIR0081
230.000
3BM1-230
251.40
4.80
4.60
16.80
15.50
7.50
MBIR0082
240.000
3BM1-240
262.30
4.80
4.60
18.70
16.30
7.70
MBIR0083
250.000
3BM1-250
273.30
4.80
4.60
18.70
16.70
7.80
E - Ring External, Series 3CM1
25 - 8
Generic Part Name: MEER

Notes:
Shaft
Dia.
Ring
Series
Size
No.
D
Free
Dia.
T
Ring
Thick.
E
Bridge
Y
Outer
Dia.
MEER0001
1.000
3CM1-1
0.64
0.25
0.30
2.00
MEER0002
2.000
3CM1-2
1.30
0.25
0.55
4.00
MEER0003
3.000
3CM1-3
2.10
0.25
0.65
5.60
MEER0004
4.000
3CM1-4
2.90
0.40
0.85
7.20
MEER0005
5.000
3CM1-5
3.70
0.60
0.90
8.50
MEER0006
6.000
3CM1-6
4.70
0.60
1.15
11.10
MEER0007
7.000
3CM1-7
5.25
0.60
1.40
13.40
MEER0008
8.000
3CM1-8
6.15
0.60
1.40
14.60
MEER0009
9.000
3CM1-9
6.80
0.60
1.50
15.80
MEER0010
10.000
3CM1-10
7.60
0.90
1.50
16.80
MEER0011
11.000
3CM1-11
8.55
0.90
1.60
17.40
MEER0012
12.000
3CM1-12
9.20
0.90
1.80
18.60
MEER0013
13.000
3CM1-13
9.95
1.10
2.00
20.30
MEER0014
15.000
3CM1-15
11.40
1.10
2.10
22.80
MEER0015
16.000
3CM1-16
12.15
1.10
2.30
23.80
MEER0016
18.000
3CM1-18
13.90
1.10
2.50
27.20
MEER0017
20.000
3CM1-20
15.60
1.30
2.80
30.00
MEER0018
22.000
3CM1-22
17.00
1.30
3.00
33.00
MEER0019
25.000
3CM1-25
19.50
1.30
3.30
37.10
ANSI Metric
Retaining Rings
Name
25 - 9
Heavy Duty External, Series 3DM1
Generic Part Name: MHER

Notes:
Corresponds to standard ANSI/ASME B27.8M - 1978.
Name
Shaft
Dia.
Ring
Series
Size
No.
D
Free
Dia.
T
Ring
Thick.
P
Hole
Dia.
B
Lug
E
Large
Sec
J
Small
Sec
MHER0001
10.000
3DM1-10
9.20
0.90
1.00
2.60
1.70
1.00
MHER0002
11.000
3DM1-11
10.00
0.90
1.00
2.60
1.90
1.10
MHER0003
12.000
3DM1-12
11.05
1.10
1.00
2.60
2.20
1.30
MHER0004
13.000
3DM1-13
11.80
1.30
1.20
3.00
2.30
1.30
MHER0005
14.000
3DM1-14
12.80
1.30
1.20
3.00
2.40
1.40
MHER0006
15.000
3DM1-15
13.80
1.30
1.20
3.30
2.60
1.40
MHER0007
16.000
3DM1-16
14.70
1.30
1.20
3.30
2.70
1.50
MHER0008
17.000
3DM1-17
15.65
1.30
1.20
3.30
2.80
1.60
25 - 10
Name
Shaft
Dia.
Ring
Series
Size
No.
D
Free
Dia.
T
Ring
Thick.
P
Hole
Dia.
B
Lug
E
Large
Sec
J
Small
Sec
MHER0009
18.000
3DM1-18
16.55
1.60
1.90
4.10
3.00
1.80
MHER0010
19.000
3DM1-19
17.50
2.00
1.90
4.60
3.20
2.00
MHER0011
20.000
3DM1-20
18.45
2.00
1.90
4.60
3.40
2.00
MHER0012
22.000
3DM1-22
20.40
2.00
1.90
4.60
3.80
2.10
MHER0013
25.000
3DM1-25
23.10
2.00
1.90
4.60
3.80
2.10
MHER0014
27.000
3DM1-27
24.85
2.40
2.30
5.60
4.10
2.30
MHER0015
28.000
3DM1-28
25.70
2.40
2.30
5.60
4.30
2.40
MHER0016
30.000
3DM1-30
27.60
2.40
2.30
5.60
4.50
2.50
MHER0017
32.000
3DM1-32
29.35
2.40
2.30
5.60
4.70
2.60
MHER0018
35.000
3DM1-35
32.20
2.40
2.30
5.60
5.10
2.80
MHER0019
38.000
3DM1-38
35.05
2.80
2.70
7.10
5.50
3.10
MHER0020
40.000
3DM1-40
36.70
2.80
2.70
7.10
5.80
3.20
MHER0021
45.000
3DM1-45
41.10
2.80
2.70
7.40
6.50
3.60
MHER0022
50.000
3DM1-50
45.50
3.20
3.10
8.00
7.10
3.90
ANSI Metric
Retaining Rings
Reinforced E - Ring External, Series 3EM1
Generic Part Name: MRER

Notes:
25 - 11
Name
Shaft
Dia.
Ring
Series
Size
No.
D
Free
Dia.
T
Ring
Thick.
Y
Outer
Dia.
E
Large
Sec
MRER0001
4.000
3EM1-4
2.90
0.60
8.50
1.50
MRER0002
5.000
3EM1-5
3.65
0.60
9.50
1.90
MRER0003
6.000
3EM1-6
4.65
0.60
11.35
2.20
MRER0004
7.000
3EM1-7
5.20
0.60
13.10
2.50
MRER0005
8.000
3EM1-8
6.15
0.60
14.95
2.70
MRER0006
9.000
3EM1-9
6.75
0.90
15.70
2.80
MRER0007
10.000
3EM1-10
7.45
0.90
16.75
3.00
MRER0008
11.000
3EM1-11
8.45
0.90
18.95
3.40
MRER0009
12.000
3EM1-12
9.10
1.10
19.60
3.50
MRER0010
13.000
3EM1-13
9.80
1.10
20.55
3.60
MRER0011
14.000
3EM1-14
10.90
1.10
22.10
3.80
MRER0012
15.000
3EM1-15
11.50
1.10
23.20
3.90
C - Ring External, Series 3FM1
Generic Part Name: MCER

Notes:
25 - 12
Shaft
Dia.
Ring
Series
Size
No.
D
Free
Dia.
T
Ring
Thick.
Y
Outer
Dia.
E
Large
Sec
MCER0001
3.000
3FM1-3
2.18
0.40
3.98
0.90
MCER0002
4.000
3FM1-4
3.00
0.40
5.00
1.00
MCER0003
5.000
3FM1-5
3.80
0.60
6.20
1.20
MCER0004
6.000
3FM1-6
4.80
0.60
7.40
1.30
MCER0005
7.000
3FM1-7
5.80
0.60
8.60
1.40
MCER0006
8.000
3FM1-8
6.80
0.60
10.00
1.60
MCER0007
9.000
3FM1-9
7.80
0.60
11.20
1.70
MCER0008
10.000
3FM1-10
8.75
0.60
12.15
1.70
MCER0009
11.000
3FM1-11
9.65
0.60
13.20
1.80
MCER0010
12.000
3FM1-12
10.55
0.60
14.35
1.90
MCER0011
13.000
3FM1-13
11.40
1.00
15.40
2.00
MCER0012
14.000
3FM1-14
12.30
1.00
16.30
2.00
MCER0013
15.000
3FM1-15
13.20
1.00
17.40
2.10
MCER0014
16.000
3FM1-16
14.10
1.00
18.50
2.20
MCER0015
17.000
3FM1-17
14.90
1.00
19.40
2.25
MCER0016
18.000
3FM1-18
15.80
1.20
20.40
2.30
MCER0017
19.000
3FM1-19
16.70
1.20
21.50
2.40
MCER0018
20.000
3FM1-20
17.55
1.20
22.65
2.55
MCER0019
22.000
3FM1-22
19.40
1.20
25.00
2.80
MCER0020
23.000
3FM1-23
20.20
1.20
26.00
2.90
MCER0021
24.000
3FM1-24
21.10
1.20
27.10
3.00
MCER0022
25.000
3FM1-25
22.00
1.20
28.30
3.15
MCER0023
26.000
3FM1-26
22.90
1.20
29.40
3.25
MCER0024
28.000
3FM1-28
24.60
1.60
31.60
3.50
MCER0025
30.000
3FM1-30
26.30
1.60
33.70
3.70
MCER0026
32.000
3FM1-32
28.10
1.60
36.10
4.00
MCER0027
35.000
3FM1-35
30.80
1.60
39.40
4.30
25 - 13
ANSI Metric
Retaining Rings
Name
Name
Shaft
Dia.
Ring
Series
Size
No.
D
Free
Dia.
T
Ring
Thick.
Y
Outer
Dia.
E
Large
Sec
MCER0028
36.000
3FM1-36
31.70
1.60
40.50
4.40
MCER0029
38.000
3FM1-38
33.40
1.60
42.60
4.60
MCER0030
40.000
3FM1-40
35.20
1.60
45.00
4.90
MCER0031
42.000
3FM1-42
37.00
1.60
47.20
5.10
MCER0032
45.000
3FM1-45
39.60
1.60
50.60
5.50
MCER0033
48.000
3FM1-48
42.30
1.60
54.10
5.90
MCER0034
50.000
3FM1-50
44.00
2.00
56.40
6.20
MCER0035
52.000
3FM1-52
46.00
2.00
58.60
6.30
MCER0036
55.000
3FM1-55
48.50
2.00
61.50
6.50
25 - 14
26
ANSI Metric Rivets
26 - 1
Small Solid Flat Head Rivets
Generic Part Name: MFHR

Notes:
26 - 2

Name
Ds
Nominal
Dia.
Preferred
Size
Dk
Head
Dia.
K
Head
Thick.
Length
MFHR01
1.00
2.20
0,45
2 to 6 by 1, 8
MFHR02
1.20
2.60
0.52
2 to 6 by 1, 8, 10
MFHR03
1.40
3.00
0.58
3 to 6 by 1, 8, 10, 12
MFHR04
1.60
3.40
0.68
3 to 6 by 1, 8, 10, 12,
15
MFHR05
2.00
4.20
0.81
3 to 6 by 1, 8, 10, 12,
15, 18, 20
MFHR06
2.50
5.20
0.98
4, 5, 6, 8, 10, 12, 15,

18, 20, 22, 25
MFHR07
3.00
6.25
1.14
4, 5, 6, 8, 10, 12, 15,

18, 20, 22, 25, 28,
30
Ds
Nominal
Dia.
Preferred
Size
Dk
Head
Dia.
K
Head
Thick.
Length
MFHR08
3.50
7.25
1.31
5, 6, 8, 10, 12, 15,

18, 20, 22, 25, 28,
30, 32, 35
MFHR09
4.00
8.25
1.50
5, 6, 8, 10, 12, 15,

18, 20, 22, 25, 28,
30, 32, 35, 38, 40
MFHR10
5.00
10.25
1.83
6, 8, 10, 12, 15, 18,

20, 22, 25, 28, 30,
32, 35, 38, 40, 45,
50
MFHR11
6.00
12.35
2.18
6, 8, 10, 12, 15, 18,

20, 22, 25, 28, 30,
32, 35, 38, 40 to 60
by 5
MFHR12
7.00
14.35
2.51
8, 10, 12, 15, 18, 20,

22, 25, 28, 30, 32,
35, 38, 40 to 70 by 5
MFHR13
8.00
16.40
2.89
8, 10, 12, 15, 18, 20,

22, 25, 28, 30, 32,
35, 38, 40 to 80 by 5
MFHR14
9.00
18.40
3.22
10, 12, 15, 18, 20,

22, 25, 28, 30, 32,
35, 38, 40 to 90 by 5
MFHR15
10.00
20.40
3.55
10, 12, 15, 18, 20,

22, 25, 28, 30, 32,
35, 38, 40 to 100 by
5
MFHR16
11.00
22.45
3.88
12, 15, 18, 20, 22,

25, 28, 30, 35, 38,
40 to 100 by 5, 110
MFHR17
12.00
24.45
4.24
12, 15, 18, 20, 22,

25, 28, 30, 32, 35,
38, 40 to 100 by 5,
110, 120
ANSI Metric Rivets
26 - 3
ANSI Metric Rivets
Name
Small Solid Round Head Rivets
Generic Part Name: MRHR

Notes:

Name
Ds
Nominal
Dia.
Preferred
Size
Dk
Head
Dia.
K
Head
Thick
.
Length
MRHR01
1.00
1.95
0.72
2 to 6 by 1, 8
MRHR02
1.20
2.30
0.84
2 to 6 by 1, 8, 10
MRHR03
1.40
2.65
0.96
3 to 6 by 1, 8, 10, 12
MRHR04
1.60
3.05
1.08
3 to 6 by 1, 8, 10, 12, 15
MRHR05
2.00
3.75
1.32
3 to 6 by 1, 8, 10, 12,
15, 18, 20
MRHR06
2.50
4.63
1.62
N/A
MRHR07
3.00
5.50
1.92
N/A
MRHR08
3.50
6.38
2.25
N/A
MRHR09
4.00
7.28
2.55
N/A
MRHR10
5.00
9.03
3.15
N/A
MRHR11
6.00
10.8y0
3.75
N/A
MRHR12
7.00
12.55
4.38
N/A
26 - 4
Name
Ds
Nominal
Dia.
Preferred
Size
Dk
Head
Dia.
K
Head
Thick
.
Length
MRHR13
8.00
14.40
4.98
N/A
MRHR14
9.00
16.15
5.58
N/A
MRHR15
10.00
17.95
6.20
N/A
MRHR16
11.00
19.70
6.80
N/A
MRHR17
12.00
21.50
7.40
N/A
Small Solid Flat Countersunk Head Rivets
Generic Part Name: MFCR

Name
Ds
Nominal
Dia.
Preferred
Size
Dk
Head
Dia.
Length
MFCR01
1.00
1.93
3 to 6 by 1, 8
MFCR02
1.20
2.31
3 to 6 by 1, 8, 10
MFCR03
1.40
2.68
4, 5, 6, 8, 10, 12
ANSI Metric Rivets
26 - 5
ANSI Metric Rivets
Notes:
Name
Ds
Nominal
Dia.
Preferred
Size
Dk
Head
Dia.
Length
MFCR04
1.60
3.06
4, 5, 6, 8, 10, 12, 15
MFCR05
2.00
3.81
4, 5, 6, 8, 10, 12, 15, 18, 20
MFCR06
2.50
4.75
5, 6, 8, 10, 12, 15, 18, 20, 22, 25
MFCR07
3.00
5.70
5, 6, 8, 10, 12, 15, 18, 20, 22, 25, 28, 30
MFCR08
3.50
6.64
5, 6, 8, 10, 12, 15, 18, 20, 22, 25, 28,

30, 35
MFCR09
4.00
7.58
6, 8, 10, 12, 15, 18, 20, 22, 25, 28, 30,

32, 35, 38, 40
MFCR10
5.00
9.48
8, 10, 12, 15, 18, 20, 22, 25, 28, 30, 32,
35, 38, 40 to 50 by 5
MFCR11
6.00
11.36
8, 10, 12, 15, 18, 20, 22, 25, 28, 30, 32,
35, 38, 40 to 60 by 5
MFCR12
7.00
13.26
10, 12, 15, 18, 20, 22, 25, 28, 30, 32,
35, 38, 40 to 70 by 5
MFCR13
8.00
15.14
10, 12, 15, 18, 20, 22, 25, 28, 30, 32,
35, 38, 40 to 80 by 5
MFCR14
9.00
17.02
12, 15, 18, 20, 22, 25, 28, 30, 32, 35,
38, 40 to 90 by 5
MFCR15
10.00
18.92
12, 15, 18, 20, 22, 25, 28, 30, 32, 35,
38, 40 to 100 by 5
MFCR16
11.00
20.80
15, 18, 20, 22, 25, 28, 30, 32, 35, 38, 40
to 100 by 5, 110
MFCR17
12.00
22.68
15, 18, 20, 22, 25, 28, 30, 32, 35, 38, 40
to 100 by 5, 110, 120
26 - 6
General Purpose Semi-Tubular Rivets
Generic Part Name: MSTR

Notes:

B
Nominal
Dia.
C
Head
Dia.
D
Head
Thick
.
E
Head
Radiu
s
J
Hole
Dia.
K
Hole
Dept
h
Length
MSTR01
1.60
2.88
0.48
3.09
1.20
1.20
2.0 to 16.0 by
0.5
MSTR02
2.00
3.60
0.60
3.83
1.50
1.50
2.0 to 20.0 by
0.5
MSTR03
2.50
4.50
0.75
4.84
1.88
1.88
2.0 to 25.0 by
0.5
MSTR04
3.00
5.40
0.90
5.78
2.25
2.25
2.5 to 30.0 by
0.5
MSTR05
3.50
6.30
1.05
6.80
2.63
2.63
3 to 35 by 1
MSTR06
4.00
7.20
1.20
7.81
3.00
3.00
3 to 40 by 1
MSTR07
5.00
9.00
1.50
9.74
3.75
3.75
4 to 50 by 1
MSTR08
6.00
10.80
1.80
11.72
4.50
4.50
5, 6 to 60 by 2
MSTR09
7.00
12.60
2.10
13.68
5.25
5.25
6 to 70 by 2
MSTR10
8.00
14.40
2.40
15.71
6.00
6.00
6 to 80 by 2
ANSI Metric Rivets
26 - 7
ANSI Metric Rivets
Name
26 - 8
27
ANSI Metric Round Head Bolts
27 - 1
27 - 2
Square Neck Bolts
Generic Part Name: MLSN

Notes:
When a range of lengths is indicated, the range is expressed as from to incremented by.
Book title
Name
Nom
Dia Thd
Pitch
Body
Dia
Head
Hgt
Head
Dia
Sqr
Depth
Sqr
Flat
Width
Lg
Length
MLSN01
M5X0.8
5.4800
3.1000
11.8000
3.1000
5.4800
5.5
10, 12, 16,

20 to 50 by 5
Name
Nom
Dia Thd
Pitch
Body
Dia
Head
Hgt
Head
Dia
Sqr
Depth
Sqr
Flat
Width
Lg
Length
MLSN02
M6X1
6.4800
3.6000
14.2000
3.6000
6.4800
6.6, 42
12, 16,
20 to 50 by 5,
60
MLSN03
M8X1.25
8.5800
4.8000
18.0000
4.8000
8.5800
8.5, 38, 48, 58
16,
20 to 50 by 5,
60, 70, 80
MLSN04
M10X1.5
5.8000
22.3000
19.6000
10.5800
0.80000
10.3,
34 to 74 by 10
20 to 50 by 5,
60 to 100 by 10
MLSN05
M12X1.75
6.8000
26.6000
23.8000
12.7000
0.80000
12,
30 to 90 by 10
25 to 50 by 5,
60 to 120 by 10
MLSN06
M14X2
7.9000
30.5000
27.6000
14.7000
1.20000
13.9,
26 to 86 by 10,
90, 100
30 to 50 by 5,
60 to 140 by 10
MLSN07
M16X2
8.9000
35.0000
31.9000
16.7000
1.20000
14.9,
32 to 82 by 10, 86
to 116 by 10
30 to 50 by 5, 60
to 160 by 10
MLSN08
M20X2.5
10.9000
43.0000
39.9000
20.8400
1.60000
18.4,
34 to 74 by 10,
78 to 108 by 10,
128, 148
40, 45,
50 to 160 by 10,
180, 200
MLSN09
M24X3
13.1000
51.0000
47.6000
24.8400
1.60000
22.1,
36 to 66 by 10,
70 to 100 by 10,
120, 140, 147, 167
45,
50 to 160 by 10,
180 to 240 by 20
27 - 3
ANSI Metric Round

Head Bolts
27 - 4
Short Square Neck Bolts
Generic Part Name: MSSN

Notes:
Corresponds to standard ANSI B18.5.2.1M - 1981.
Book title
Name
Nom
Dia_thd
pitch
Body
Dia
Head
Dia
Head
Hgt
Sqr
Flat
Width
Sqr
Depth
Lg
Length
MSSN01
M6X1
6.000
14.200
3.6000
6.4800
3.0000
5.0, 37, 42
12, 16,
20 to 60 by 5
Name
Nom
Dia_thd
pitch
Body
Dia
Head
Dia
Head
Hgt
Sqr
Flat
Width
Sqr
Depth
Lg
Length
MSSN02
M8X1.25
8.000
18.000
4.8000
8.5800
3.0000
5.5,
33 to 48 by 5,
58
16,
20 to 70 by 5,
80
MSSN03
M10X1.5
10.000
22.300
5.8000
10.580
4.0000
7,
29 to 44 by 5,
54, 64, 74
20 to 70 by 5,
80, 90, 100
MSSN04
M12X1.75
12.000
26.600
6.8000
12.700
4.0000
7.5,
25 to 40 by 5,
50 to 90 by 10
20 to 70 by 5,
80 to 120 by 10
MSSN05
M14X2
14.000
30.500
7.9000
14.700
4.0000
8, 26, 31,
36 to 86 by 10,
90, 100
25 to 70 by 5, 80
to 140 by 10
MSSN06
M16X2
16.000
35.000
8.9000
16.700
5.0000
9, 27,
32 to 82 by 10,
86 to 116 by 10
30 to 70 by 5, 80
to 160 by 10
MSSN07
M20X2.5
20.000
43.000
10.900
20.840
5.0000
10,
34 to 74 by 10,
78 to 108 by 10,
128, 148
35 to 70 by 5,
80 to 160 by 10,
180, 200
27 - 5
ANSI Metric Round

Head Bolts
27 - 6
28
ANSI Metric Socket Head
Screws
28 - 1
Socket Head Cap Screws
Generic Part Name: MSCS

Notes:

Name
Nom.
Size &
Thread
Pitch
Nom.
Thread
Dia.
D
Body
Dia.
A
Head
Dia.
H
Head
Hgt
Hex
Socket
Size
L
Length
MSCS01
M1.6X0.35
1.60
1.60
3.00
1.60
1.500
3, 4, 5, 6, 8,
10, 12, 16
MSCS02
M2X0.4
2.00
2.00
3.80
2.00
1.500
3, 4, 5, 6, 8,
10, 12, 16,
20
MSCS03
M2.5X0.45
2.50
2.50
4.50
2.50
2.000
4, 5, 6, 8,
10, 12, 16,
20, 25
MSCS04
M3X0.5
3.00
3.00
5.50
3.00
2.500
5, 6, 8, 10,
12, 16, 20,
25, 30
28 - 2
Nom.
Size &
Thread
Pitch
Nom.
Thread
Dia.
D
Body
Dia.
A
Head
Dia.
H
Head
Hgt
Hex
Socket
Size
L
Length
MSCS05
M4X0.7
4.00
4.00
7.00
4.00
3.000
6, 8, 10, 12,
16, 20 to 40
by 5
MSCS06
M5X0.8
5.00
5.00
8.50
5.00
4.000
8, 10, 12,
16, 20 to 50
by 5
MSCS07
M6X1
6.00
6.00
10.00
6.00
5.000
10, 12, 16,

20 to 60 by
5
MSCS08
M8X1.25
8.00
8.00
13.00
8.00
6.000
12, 16, 20 to
70 by 5, 80
MSCS09
M10X1.5
10.00
10.00
16.00
10.00
8.000
16, 20 to 70
by 5, 80 to
100 by 10
MSCS10
M12X1.75
12.00
12.00
18.00
12.00
10.000
20 to 70 by
5, 80 to 120
by 10
MSCS11
M14X2
14.00
14.00
21.00
14.00
12.000
20 to 70 by
5, 80 to 120
by 10
MSCS12
M16X2
16.00
16.00
24.00
16.00
14.000
25 to 70 by
5, 80 to 160
by 10
MSCS13
M20X2.5
20.00
20.00
30.00
20.00
17.000
30 to 70 by
5, 80 to 160
by 10, 180,
200
MSCS14
M24X3
24.00
24.00
36.00
24.00
19.000
40 to 70 by
5, 80 to 160
by 10, 180
to 240 by 20
MSCS15
M30X3.5
30.00
30.00
45.00
30.00
22.000
45 to 70 by
5, 80 to 160
by 10, 180
to 300 by 20
ANSI Metric Socket Head Screws
28 - 3
ANSI Metric Socket

Head Screws
Name
Name
Nom.
Size &
Thread
Pitch
Nom.
Thread
Dia.
D
Body
Dia.
A
Head
Dia.
H
Head
Hgt
Hex
Socket
Size
L
Length
MSCS16
M36X4
36.00
36.00
54.00
36.00
27.000
55 to 70 by
5, 80 to 160
by 10, 180
to 300 by 20
MSCS17
M42X4.5
42.00
42.00
63.00
42.00
32.000
65, 70, 80 to
160 by 10,
180 to 300
by 20
MSCS18
M48X5
48.00
48.00
72.00
48.00
36.000
80 to 160 by
10, 180 to
300 by 20
Hexagon Socket Head Shoulder Screws
Generic Part Name: MSSS

Notes:
28 - 4

Nominal
Size &
Thread
Pitch
D
Shoulder
Dia.
A
Head
Dia.
H
Head
Height
Hex
Socket
Size
T
Hex
Socket
Depth
J
Hex
Socket
Flat
MSSS01
6.500
6.487
10.00
4.50
3.000
2.40
3.071
MSSS02
8.000
7.987
13.00
5.50
4.000
3.30
4.084
MSSS03
10.000
9.987
16.00
7.00
5.000
4.20
5.084
MSSS04
13.000
12.984
18.00
9.00
6.000
4.90
6.095
MSSS05
16.000
15.984
24.00
11.00
8.000
6.60
8.115
MSSS06
20.000
19.980
30.00
14.00
10.000
8.80
10.127
MSSS07
25.000
24.980
36.00
16.00
12.000
10.00
12.146
Name
K
Shoulder
Neck
Dia.
F
Shoulder
Neck
Width
D1
Thd
Dia.
Thd
Pitch
G
Thr.
Neck
Dia.
I
Thr.
Neck
Width
E
Thr.
Lg
Lengths
MSSS01
5.92
2.50
5.00
0.800
3.86
2.40
9.75
10, 12,
16, 20,
25, 30, 40
MSSS02
7.42
2.50
6.00
1.000
4.58
2.60
11.25
10, 12,
16, 20,
25, 30,
40, 50
MSSS03
9.42
2.50
8.00
1.250
6.25
2.80
13.25
10, 12,
16, 20,
25, 30 to
100 by 10
MSSS04
12.42
2.50
10.00
1.500
7.91
3.00
16.40
12, 16,
20, 25,
30 to 120
by 10
MSSS05
15.42
2.50
12.00
1.750
9.57
4.00
18.40
30 to 120
by 10
MSSS06
19.42
2.50
16.00
2.000
13.23
4.80
22.40
40 to 120
by 10
28 - 5
ANSI Metric Socket

Head Screws
Name
Name
K
Shoulder
Neck
Dia.
F
Shoulder
Neck
Width
D1
Thd
Dia.
Thd
Pitch
G
Thr.
Neck
Dia.
I
Thr.
Neck
Width
E
Thr.
Lg
Lengths
MSSS07
24.42
3.00
20.00
2.500
16.57
5.60
27.40
50 to 120
by 10
Hexagon Socket Button Head Cap Screws
Generic Part Name: MSBS

Notes:

Name
Nominal
Size &
Thread
Pitch
D
Thrd
Dia.
A
Head
Dia.
H
Head
Hgt
Hex
Socket
Size
S
Head
Side
Hgt
L
Length
MSBS01
M3X0.5
3.00
5.70
1.65
2.000
0.38
5, 6, 8, 10, 12
MSBS02
M4X0.7
4.00
7.60
2.20
2.500
0.38
6, 8, 10, 12,
16, 20
MSBS03
M5X0.8
5.00
9.50
2.75
3.000
0.50
6, 8, 10, 12,
16, 20, 25, 30
28 - 6
Nominal
Size &
Thread
Pitch
D
Thrd
Dia.
A
Head
Dia.
H
Head
Hgt
Hex
Socket
Size
S
Head
Side
Hgt
L
Length
MSBS04
M6X1
6.00
10.50
3.30
4.000
0.80
6, 8, 10, 12,
16, 20, 25, 30
MSBS05
M8X1.25
8.00
14.00
4.40
5.000
0.80
10, 12, 16,

20 to 40 by 5
MSBS06
M10X1.5
10.00
17.50
5.50
6.000
0.80
12, 16, 20 to
40 by 5
MSBS07
M12X1.75
12.00
21.00
6.60
8.000
0.80
25 to 60 by 5
MSBS08
M16X2
16.00
28.00
8.80
10.000
1.50
25 to 60 by 5
Hexagon Socket Flat Countersunk Head Cap

Screws
Generic Part Name: MSFS

Notes:

28 - 7
ANSI Metric Socket

Head Screws
Name
Name
Nominal
Size &
Thread
Pitch
Nominal
Thread
Dia.
D
Body
Dia.
A
Head
Dia.
Hex
Socket
Size
L
Length
MSFS01
M3X0.5
3.00
3.00
6.72
2.000
6, 8, 10, 12, 16,

20 to 35 by 5
MSFS02
M4X0.7
4.00
4.00
8.96
2.500
8, 10, 12, 16, 20

to 40 by 5
MSFS03
M5X0.8
5.00
5.00
11.20
3.000
8, 10, 12, 16, 20

to 50 by 5
MSFS04
M6X1
6.00
6.00
13.44
4.000
8, 10, 12, 16, 20

to 50 by 5
MSFS05
M8X1.25
8.00
8.00
17.92
5.000
12, 16, 20 to 70
by 5
MSFS06
M10X1.5
10.00
10.00
22.40
6.000
16, 20 to 70 by
5, 80, 90
MSFS07
M12X1.75
12.00
12.00
26.88
8.000
30 to 70 by 5,
80 to 120 by 10
MSFS08
M14X2
14.00
14.00
30.24
10.000
30 to 70 by 5,
80 to 120 by 10
MSFS09
M16X2
16.00
16.00
33.60
10.000
30 to 70 by 5,
80 to 150 by 10
MSFS10
M20X2.5
20.00
20.00
40.32
12.000
30 to 70 by 5,
80 to 150 by 10
Socket Set Screws, Flat Point
28 - 8
Notes:
Corresponds to standard ANSI/ASME M18.3.6M - 1986.

Name
Nom.
Dia. &
Thread
Pitch
Nomi
nal
Threa
d
Dia.
C2
Flat
Point
Dia.
Hex
Socke
t
Size
L
Length
MOSF01
M1.6X0.35
1.60
0.80
0.700
1.5, 2, 2,5, 3
MOSF02
M2X0.4
2.00
1.00
0.900
1.5, 2, 2.5, 3, 4
MOSF03
M2.5X0.45
2.50
1.50
1.300
2, 2,5, 3, 4
MOSF04
M3X0.5
3.00
2.00
1.500
2, 2.5, 3, 4, 5
MOSF05
M4X0.7
4.00
2.50
2.000
2.5, 3, 4, 5, 6
MOSF06
M5X0.8
5.00
3.50
2.500
3, 4, 5, 6, 8
MOSF07
M6X1
6.00
4.00
3.000
4, 5, 6, 8
MOSF08
M8X1.25
8.00
5.50
4.000
5, 6, 8, 10
MOSF09
M10X1.5
10.00
7.00
5.000
6, 8, 10, 12
MOSF10
M12X1.75
12.00
8.50
6.000
8, 10, 12, 16
MOSF11
M16X2
16.00
12.00
8.000
10, 12, 16, 20
MOSF12
M20X2.5
20.00
15.00
10.000
12, 16, 20, 25
MOSF13
M24X3
24.00
18.00
12.000
16, 20, 25, 30
28 - 9
ANSI Metric Socket

Head Screws
Generic Part Name: MOSF
Socket Set Screws, Oval Point
Generic Part Name: MOSO

Notes:

Name
Nom.
Dia.
&
Thread
Pitch
Nominal
Thread
Dia.
Hex
Socket
Size
J
Hex
Socket
Flat
R
Point
Radius
L
Length
MOSO01
M1.6X0.35
1.60
0.700
0.72
1.60
1.5, 2, 2.5, 3
MOSO02
M2X0.4
2.00
0.900
0.90
1.90
1.5, 2, 2.5,
3, 4
MOSO03
M2.5X0.45
2.50
1.300
1.29
2.28
2, 2.5, 3, 4
MOSO04
M3X0.5
3.00
1.500
1.54
2.65
2.5, 3, 4, 5
MOSO05
M4X0.7
4.00
2.000
2.04
3.80
3, 4, 5, 6
MOSO06
M5X0.8
5.00
2.500
2.56
4.55
4, 5, 6, 8
MOSO07
M6X1
6.00
3.000
3.07
5.30
5, 6, 8
MOSO08
M8X1.25
8.00
4.000
4.08
6.80
6, 8, 10
MOSO09
M10X1.5
10.00
5.000
5.08
8.30
8, 10, 12
28 - 10
Nom.
Dia.
&
Thread
Pitch
Nominal
Thread
Dia.
Hex
Socket
Size
J
Hex
Socket
Flat
R
Point
Radius
L
Length
MOSO10
M12X1.75
12.00
6.000
6.09
9.80
10, 12, 16
MOSO11
M16X2
16.00
8.000
8.12
12.80
12, 16, 20
MOSO12
M20X2.5
20.00
10.000
10.13
15.80
16, 20, 25
MOSO13
M24X3
24.00
12.000
12.15
18.80
20, 25, 30
Socket Set Screws, Cone Point
Generic Part Name: MOSC

Notes:

28 - 11
ANSI Metric Socket

Head Screws
Name
Name
Nom.
Dia.
&
Thread
Pitch
Nominal
Thread
Dia.
Hex
Socket
Size
J
Hex
Socket
Flat
A
Cone
Point
Flat
L
Length
MOSC01
M1.6X0.35
1.60
0.700
0.72
0.16
1.5, 2, 2.5, 3
MOSC02
M2X0.4
2.00
0.900
0.90
0.20
1.5, 2, 2.5,
3, 4
MOSC03
M2.5X0.45
2.50
1.300
1.29
0.25
2, 2.5, 3, 4
MOSC04
M3X0.5
3.00
1.500
1.54
0.30
2.5, 3, 4, 5
MOSC05
M4X0.7
4.00
2.000
2.04
0.40
3, 4, 5, 6
MOSC06
M5X0.8
5.00
2.500
2.56
0.50
4, 5, 6, 8
MOSC07
M6X1
6.00
3.000
3.07
1.50
5, 6, 8
MOSC08
M8X1.25
8.00
4.000
4.08
2.00
6, 8, 10
MOSC09
M10X1.5
10.00
5.000
5.08
2.50
8, 10, 12
MOSC10
M12X1.75
12.00
6.000
6.09
3.00
10, 12, 16
MOSC11
M16X2
16.00
8.000
8.12
4.00
12, 16, 20
MOSC12
M20X2.5
20.00
10.000
10.13
5.00
16, 20, 25
MOSC13
M24X3
24.00
12.000
12.15
6.00
20, 25, 30
28 - 12
ANSI Metric Socket

Head Screws
Socket Set Screws, Half Dog Point
Generic Part Name: MOSD

Notes:

Name
Nom.
Dia. &
Thread
Pitch
Nom.
Thread
Dia.
Hex
Socket
Size
J
Socket
Flat
Width
P
Point
Dia.
Q
Point
Length
L
Length
MOSD01
M1.6X0.35
1.60
0.700
0.72
0.80
0.53
2, 2.5, 3
MOSD02
M2X0.4
2.00
0.900
0.90
1.00
0.64
2.5, 3, 4
MOSD03
M2.5X0.45
2.50
1.300
1.29
1.50
0.78
2.5, 3, 4
MOSD04
M3X0.5
3.00
1.500
1.54
2.00
0.92
3, 4, 5
MOSD05
M4X0.7
4.00
2.000
2.04
2.50
1.20
3, 4, 5, 6
MOSD06
M5X0.8
5.00
2.500
2.56
3.50
1.37
5, 6, 8
MOSD07
M6X1
6.00
3.000
3.07
4.00
1.74
5, 6, 8
MOSD08
M8X1.25
8.00
4.000
4.08
5.50
2.28
6, 8, 10
MOSD09
M10X1.5
10.00
5.000
5.08
7.00
2.82
8, 10, 12
28 - 13
Name
Nom.
Dia. &
Thread
Pitch
Nom.
Thread
Dia.
Hex
Socket
Size
J
Socket
Flat
Width
P
Point
Dia.
Q
Point
Length
L
Length
MOSD10
M12X1.75
12.00
6.000
6.09
8.50
3.35
10, 12, 16
MOSD11
M16X2
16.00
8.000
8.12
12.00
4.40
12, 16, 20
MOSD12
M20X2.5
20.00
10.000
10.13
15.00
5.45
16, 20, 25
MOSD13
M24X3
24.00
12.000
12.15
18.00
6.49
20, 25, 30
Socket Set Screws, Cup Point
Generic Part Name: MOSP

Notes:
28 - 14

Nom.
Dia.
&
Thread
Pitch
Nominal
Thread
Dia.
C
Cup
Poin
t
Dia.
Hex
Socket
Size
J
Hex
Socket
Flat
L
Length
MOSP01
M1.6X0.35
1.60
0.80
0.700
0.72
1.5, 2, 2,5, 3
MOSP02
M2X0.4
2.00
1.00
0.900
0.90
1.5, 2, 2.5, 3,
4
MOSP03
M2.5X0.45
2.50
1.20
1.300
1.29
2, 2,5, 3, 4
MOSP04
M3X0.5
3.00
1.40
1.500
1.54
2, 2.5, 3, 4, 5
MOSP05
M4X0.7
4.00
2.00
2.000
2.04
2.5, 3, 4, 5, 6
MOSP06
M5X0.8
5.00
2.50
2.500
2.56
3, 4, 5, 6, 8
MOSP07
M6X1
6.00
3.00
3.000
3.07
4, 5, 6, 8
MOSP08
M8X1.25
8.00
5.00
4.000
4.08
5, 6, 8, 10
MOSP09
M10X1.5
10.00
6.00
5.000
5.08
6, 8, 10, 12
MOSP10
M12X1.75
12.00
8.00
6.000
6.09
8, 10, 12, 16
MOSP11
M16X2
16.00
10.00
8.000
8.12
10, 12, 16, 20
MOSP12
M20X2.5
20.00
14.00
10.000
10.13
12, 16, 20, 25
MOSP13
M24X3
24.00
16.00
12.000
12.15
16, 20, 25, 30
28 - 15
ANSI Metric Socket

Head Screws
Name
28 - 16
29
ANSI Metric T-Bolts and
T-Nuts
29 - 1
Metric T-Bolts
Generic Part Name: MTB

Notes:

Name
Nominal
dia_thr
pitch
Basic
Dia
Flat_
Width
Head_
Hgt
Length
Thread
length
MTB01
M4X0.7
4.000
9.000
2.500
45 to 80 by 5,
90 to 160 by 10,
180 to 260 by 20,
300
14, 20,
33
MTB02
M5X0.8
5.000
10.000
4.000
55 to 80 by 5, 90
to 160 by 10, 180
to 260 by 20, 300
16, 22,
35
MTB03
M6X1
6.000
13.000
6.000
65 to 80 by 5, 90
to 160 by 10, 180
to 260 by 20, 300
18, 24,
37
MTB04
M8X1.25
8.000
15.000
6.000
90 to 160 by 10,
180 to 260 by 20,
300
22, 28,
41
29 - 2
Nominal
dia_thr
pitch
Basic
Dia
Flat_
Width
Head_
Hgt
Length
Thread
length
MTB05
M10X1.5
10.000
18.000
7.000
110 to 160 by 10,

180 to 260 by 20,
300
26, 32,
45
MTB06
M12X1.75
12.000
22.000
8.000
130 to 160 by 10,

180 to 260 by 20,
300
36, 49
MTB07
M16X2
16.000
28.000
10.000
160 to 260 by 20,

300
44, 57
MTB08
M20X2.5
20.000
34.000
14.000
160 to 260 by 20,

300
52, 65
MTB09
M24X3
24.000
43.000
18.000
160 to 260 by 20,

300
60, 73
MTB10
M30X3.5
30.000
53.000
23.000
60 to 80 by 5, 90
to 160 by 10, 180
to 260 by 20, 300
55, 60,
66, 72,
85
MTB11
M36X4
36.000
64.000
28.000
70, 75, 80 to 160

by 10, 180 to 260
by 20, 300
64, 69,
74, 78,
84, 97
MTB12
M42X4.5
42.000
75.000
32.000
90 to 160 by 10,
180 to 260 by 20,
300
83, 90,
96, 109
MTB13
M48X5
48.000
85.000
36.000
100 to 160 by 10,

180 to 260 by 20,
300
92,
102,
108,
121
ANSI Metric T-Bolts and T-Nuts
29 - 3
ANSI Metric T-Bolts

and T-Nuts
Name
Metric T-Nuts
Generic Part Name: MTN

Notes:

Name
Nominal
Dia Thr
Pitch
Basic
Dia
Tng
Wdth
Stud
Tap
Nut
Wdth
Nut
Ht
Total
Thick
Nut
Lgth
MTN01
M6X1
8.000
8.7000
6.000
15.000
6.000
9.000
18.000
MTN02
M8X1.25
10.000
11.000
8.000
18.000
7.000
10.500
20.000
MTN03
M10X1.5
12.000
13.500
10.000
22.000
8.000
12.000
23.000
MTN04
M12X1.75
16.000
17.250
12.000
28.000
10.000
15.000
27.000
MTN05
M16X2
20.000
20.500
16.000
34.000
14.000
21.000
35.000
MTN06
M20X2.5
24.000
26.500
20.000
43.000
18.000
27.000
46.000
MTN07
M24X3
30.000
33.000
24.000
53.000
23.000
34.000
53.000
MTN08
M30X3.5
36.000
39.250
30.000
64.000
28.000
42.000
65.000
MTN09
M36X4
42.000
46.750
36.000
75.000
32.000
48.000
75.000
MTN10
M42X4.5
48.000
52.500
42.000
85.000
36.000
54.000
85.000
29 - 4
30
ANSI Metric Tapping Screws
30 - 1
Generic Part Name: MSTS

Notes:
Corresponds to standard ANSI B18 6.5M-1981.

Name
Nominal Dia.
Thr. Pitch
Types
L
Length
MSTS01
2.2 x 0.8
AB
6, 8, 10, 13
MSTS02
2.9 x 1
AB
8, 10, 13, 16
MSTS03
3.5 x 1.3
AB
10, 13, 16, 20, 25
MSTS04
4.2 x 1.4
AB
10, 13, 16, 20, 25
MSTS05
4.8 x 1.6
AB
13, 16, 20 to 35 by 5
MSTS06
5.5 x 1.8
AB
16, 20 to 40 by 5
MSTS07
6.3 x 1.8
AB
16, 20 to 40 by 5
MSTS08
8 x 2.1
AB
20 to 50 by 5
MSTS09
9.5 x 2.1
AB
25 to 60 by 5
MSTS11
2.2 x 0.8
B, BF, BT
6, 8, 10, 13
MSTS12
2.9 x 1
B, BF, BT
8, 10, 13, 16
MSTS13
3.5 x 1.3
B, BF, BT
10, 13, 16, 20, 25
MSTS14
4.2 x 1.4
B, BF, BT
10, 13, 16, 20, 25
30 - 2
Nominal Dia.
Thr. Pitch
Types
L
Length
MSTS15
4.8 x 1.6
B, BF, BT
13, 16, 20 to 35 by 5
MSTS16
5.5 x 1.8
B,BF, BT
16, 20 to 40 by 5
MSTS17
6.3 x 1.
B, BF, BT
16, 20 to 40 by 5
MSTS18
8 x 2.1
B, BF, BT
20 to 50 by 5
MSTS19
9.5 x 2.1
B, BF, BT
25 to 60 by 5
MSTS21
2 x 0.4
D, F, T
6, 8, 10, 13
MSTS22
2.5 x 0.45
D, F, T
6, 8, 10, 13, 16
MSTS23
3 x 0.5
D, F, T
8, 10, 13, 16
MSTS24
3.5 x 0.6
D, F, T
8, 10, 13, 16
MSTS25
4 x 0.7
D, F, T
10, 13, 16, 20, 25
MSTS26
5 x 0.8
D, F, T
13, 16, 20 to 35 by 5
MSTS27
6x1
D, F, T
16, 20 to 40 by 5
MSTS28
8 x 1.25
D, F, T
20 to 50 by 5
MSTS29
10 x 1.5
D, F, T
20 to 60 by 5
ANSI Metric Tapping

Screws
Name
Type 1 Cross Recessed Flat Countersunk

Head
30 - 3
Generic Part Name: MCTS

Notes:
30 - 4

Name
Nominal Dia.
Thr. Pitch
Types
L
Length
MCTS01
2.2 x 0.8
AB
6, 8, 10, 13
MCTS02
2.9 x 1
AB
8, 10, 13, 16
MCTS03
3.5 x 1.3
AB
10, 13, 16, 20, 25
MCTS04
4.2 x 1.4
AB
10, 13, 16, 20, 25
MCTS05
4.8 x 1.6
AB
13, 16, 20 to 35 by 5
MCTS06
5.5 x 1.8
AB
16, 20 to 40 by 5
MCTS07
6.3 x 1.8
AB
16, 20 to 40 by 5
MCTS08
8 x 2.1
AB
20 to 50 by 5
MCTS09
9.5 x 2.1
AB
25 to 60 by 5
MCTS11
2.2 x 0.8
B, BF, BT
6, 8, 10, 13
MCTS12
2.9 x 1
B, BF, BT
8, 10, 13, 16
MCTS13
3.5 x 1.3
B, BF, BT
10, 13, 16, 20, 25
MCTS14
4.2 x 1.4
B, BF, BT
10, 13, 16, 20, 25
MCTS15
4.8 x 1.6
B, BF, BT
13, 16, 20 to 35 by 5
MCTS16
5.5 x 1.8
B, BF, BT
16, 20 to 40 by 5
MCTS17
6.3 x 1.8
B, BF, BT
16, 20 to 40 by 5
MCTS18
8 x 2.1
B, BF, BT
20 to 50 by 5
MCTS19
9.5 x 2.1
B, BF, BT
25 to 60 by 5
MCTS21
2 x 0.4
D, F, T
6, 8, 10, 13
MCTS22
2.5 x 0.45
D, F, T
6, 8, 10, 13, 16
MCTS23
3 x 0.5
D, F, T
8, 10, 13, 16
MCTS24
3.5 x 0.6
D, F, T
8, 10, 13, 16
MCTS25
4 x 0.7
D, F, T
10, 13, 16, 20, 25
MCTS26
5 x 0.8
D, F, T
13, 16, 20 to 35 by 5
MCTS27
6x1
D, F, T
16, 20 to 40 by 5
Name
Nominal Dia.
Thr. Pitch
Types
L
Length
MCTS28
8 x 1.25
D, F, T
20 to 50 by 5
MCTS29
10 x 1.5
D, F, T
20 to 60 by 5
ANSI Metric Tapping

Screws
Generic Part Name: MOTS

Notes:

Name
Nominal Dia.
Thr. Pitch
Types
L
Length
MOTS01
2.2 x 0.8
AB
6, 8, 10, 13
MOTS02
2.9 x 1
AB
8, 10, 13, 16
MOTS03
3.5 x 1.3
AB
10, 13, 16, 20, 25
MOTS04
4.2 x 1.4
AB
10, 13, 16, 20, 25
MOTS05
4.8 x 1.6
AB
13, 16, 20 to 35 by 5
MOTS06
5.5 x 1.8
AB
16, 20 to 40 by 5
30 - 5
30 - 6
Name
Nominal Dia.
Thr. Pitch
Types
L
Length
MOTS07
6.3 x 1.8
AB
16, 20 to 40 by 5
MOTS08
8 x 2.1
AB
20 to 50 by 5
MOTS09
9.5 x 2.1
AB
25 to 60 by 5
MOTS11
2.2 x 0.8
B, BF, BT
6, 8, 10, 13
MOTS12
2.9 x 1
B, BF, BT
8, 10, 13, 16
MOTS13
3.5 x 1.3
B, BF, BT
10, 13, 16, 20, 25
MOTS14
4.2 x 1.4
B, BF, BT
10, 13, 16, 20, 25
MOTS15
4.8 x 1.6
B, BF, BT
13, 16, 20 to 35 by 5
MOTS16
5.5 x 1.8
B, BF, BT
16, 20 to 40 by 5
MOTS17
6.3 x 1.8
B, BF, BT
16, 20 to 40 by 5
MOTS18
8 x 2.1
B, BF, BT
20 to 50 by 5
MOTS19
9.5 x 2.1
B, BF, BT
25 to 60 by 5
MOTS21
2 x 0.4
D, F, T
6, 8, 10, 13
MOTS22
2.5 x 0.45
D, F, T
6, 8, 10, 13, 16
MOTS23
3 x 0.5
D, F, T
8, 10, 13, 16
MOTS24
3.5 x 0.6
D, F, T
8, 10, 13, 16
MOTS25
4 x 0.7
D, F, T
10, 13, 16, 20, 25
MOTS26
5 x 0.8
D, F, T
13, 16, 20 to 35 by 5
MOTS27
6x1
D, F, T
16, 20 to 40 by 5
MOTS28
8 x 1.25
D, F, T
20 to 50 by 5
MOTS29
10 x 1.5
D, F, T
20 to 60 by 5
Type 1 Cross Recessed Oval Countersunk

Head
ANSI Metric Tapping

Screws
Generic Part Name: MRTS

Notes:

Name
Nominal Dia.
Thr. Pitch
Types
Length
MRTS01
2.2 x 0.8
AB
6, 8, 10, 13
MRTS02
2.9 x 1
AB
8, 10, 13, 16
MRTS03
3.5 x 1.3
AB
10, 13, 16, 20, 25
MRTS04
4.2 x 1.4
AB
10, 13, 16, 20, 25
MRTS05
4.8 x 1.6
AB
13, 16, 20 to 35 by 5
MRTS06
5.5 x 1.8
AB
16, 20 to 40 by 5
MRTS07
6.3 x 1.8
AB
16, 20 to 40 by 5
MRTS08
8 x 2.1
AB
20 to 50 by 5
MRTS09
9.5 x 2.1
AB
25 to 60 by 5
MRTS11
2.2 x 0.8
B, BF, BT
6, 8, 10, 13
30 - 7
Name
Nominal Dia.
Thr. Pitch
Types
Length
MRTS12
2.9 x 1
B, BF, BT
8, 10, 13, 16
MRTS13
3.5 x 1.3
B, BF, BT
10, 13, 16, 20, 25
MRTS14
4.2 x 1.4
B, BF, BT
10, 13, 16, 20, 25
MRTS15
4.8 x 1.6
B, BF, BT
13, 16, 20 to 35 by 5
MRTS16
5.5 x 1.8
B, BF, BT
16, 20 to 40 by 5
MRTS17
6.3 x 1.8
B, BF, BT
16, 20 to 40 by 5
MRTS18
8 x 2.1
B, BF, BT
20 to 50 by 5
MRTS19
9.5 x 2.1
B, BF, BT
25 to 60 by 5
MRTS21
2 x 0.4
D, F, T
6, 8, 10, 13
MRTS22
2.5 x 0.45
D, F, T
6, 8, 10, 13, 16
MRTS23
3 x 0.5
D, F, T
8, 10, 13, 16
MRTS24
3.5 x 0.6
D, F, T
8, 10, 13, 16
MRTS25
4 x 0.7
D, F, T
10, 13, 16, 20, 25
MRTS26
5 x 0.8
D, F, T
13, 16, 20 to 35 by 5
MRTS27
6x1
D, F, T
16, 20 to 40 by 5
MRTS28
8 x 1.25
D, F, T
20 to 50 by 5
MRTS29
10 x 1.5
D, F, T
20 to 60 by 5
Slotted Pan Head
30 - 8
Generic Part Name: MPTS

Notes:

Nominal Dia.
Thr. Pitch
Types
L
Length
MPTS01
2.2 x 0.8
AB
4, 5, 6, 8, 10, 13
MPTS02
2.9 x 1
AB
6, 8, 10, 13, 16
MPTS03
3.5 x 1.3
AB
8, 10, 13, 16, 20, 25
MPTS04
4.2 x 1.4
AB
8, 10, 13, 16, 20, 25
MPTS05
4.8 x 1.6
AB
8, 10, 13, 16, 20 to 35 by 5
MPTS06
5.5 x 1.8
AB
13, 16, 20 to 40 by 5
MPTS07
6.3 x 1.8
AB
13, 16, 20 to 40 by 5
MPTS08
8 x 2.1
AB
16, 20 to 50 by 5
MPTS09
9.5 x 2.1
AB
20 to 60 by 5
MPTS10
2.2 x 0.8
B, BF, BT
4, 5, 6, 8, 10, 13
MPTS11
2.9 x 1
B, BF, BT
6, 8, 10, 13, 16
MPTS12
3.5 x 1.3
B, BF, BT
8, 10, 13, 16, 20, 25
MPTS13
4.2 x 1.4
B, BF, BT
8, 10, 13, 16, 20, 25
MPTS14
4.8 x 1.6
B, BT, BT
10, 13, 16, 20 to 35 by 5
MPTS15
5.5 x 1.8
B, BF, BT
13, 16, 20 to 40 by 5
MPTS16
6.3 x 1.8
B, BF, BT
13, 16, 20 to 40 by 5
MPTS17
8 x 2.1
B, BF, BT
16, 20 to 50 by 5
MPTS18
9.5 x 2.1
B, BT, BT
20 to 60 by 5
MPTS19
2 x 0.4
D, F, T
4, 5, 6, 8, 10, 13
MPTS20
2.5 x 0.45
D, F, T
4, 5, 6, 8, 10, 13, 16
MPTS21
3 x 0.5
D, F, T
6, 8, 10, 13, 16
MPTS22
3.5 x 0.6
D, F, T
6, 8, 10, 13, 16
MPTS23
4 x 0.7
D, F, T
8, 10, 13, 16, 20, 25
MPTS24
5 x 0.8
D, F, T
10, 13, 16, 20 to 40 by 5
MPTS25
6x1
D, F, T
13, 16, 20 to 40 by 5
30 - 9
ANSI Metric Tapping

Screws
Name
Name
Nominal Dia.
Thr. Pitch
Types
L
Length
MPTS26
8 x 1.25
D, F, T
16, 20 to 50 by 5
MPTS27
10 x 1.5
D, F, T
20 to 60 by 5
Type 1 Cross Recessed Pan Head
Generic Part Name: MTTS

Notes:

Name
Nominal Dia.
Thr. Pitch
Types
Length
MTTS01
2.2 x 0.8
AB
4, 5, 6, 8, 10, 13
MTTS02
2.9 x 1
AB
6, 8, 10, 13, 16
MTTS03
3.5 x 1.3
AB
8, 10, 13, 16, 20, 25
MTTS04
4.2 x 1.4
AB
8, 10, 13, 16, 20, 25
MTTS05
4.8 x 1.6
AB
8, 10, 13, 16, 20 to 35 by 5
MTTS06
5.5 x 1.8
AB
13, 16, 20 to 40 by 5
MTTS07
6.3 x 1.8
AB
13, 16, 20 to 40 by 5
30 - 10
Nominal Dia.
Thr. Pitch
Types
Length
MTTS08
8 x 2.1
AB
16, 20 to 50 by 5
MTTS09
9.5 x 2.1
AB
20 to 60 by 5
MTTS11
2.2 x 0.8
B, BF, BT
4, 5, 6, 8, 10, 13
MTTS12
2.9 x 1
B, BF, BT
6, 8, 10, 13, 16
MTTS13
3.5 x 1.3
B, BF, BT
8, 10, 13, 16, 20, 25
MTTS14
4.2 x 1.4
B, BF, BT
8, 10, 13, 16, 20, 25
MTTS15
4.8 x 1.6
B, BF, BT
10, 13, 16, 20 to 35 by 5
MTTS16
5.5 x 1.8
B, BF, BT
13, 16, 20 to 40 by 5
MTTS17
6.3 x 1.8
B, BF, BT
13, 16, 20 to 40 by 5
MTTS18
8 x 2.1
B, BF, BT
16, 20 to 50 by 5
MTTS19
9.5 x 2.1
B, BF, BT
20 to 60 by 5
MTTS21
2 x 0.4
D, F, T
4, 5, 6, 8, 10, 13
MTTS22
2.5 x 0.45
D, F, T
4, 5, 6, 8, 10, 13, 16
MTTS23
3 x 0.5
D, F, T
6, 8, 10, 13, 16
MTTS24
3.5 x 0.6
D, F, T
6, 8, 10, 13, 16
MTTS25
4 x 0.7
D, F, T
8, 10, 13, 16, 20, 25
MTTS26
5 x 0.8
D, F, T
10, 13, 16, 20 to 40 by 5
MTTS27
6x1
D, F, T
13, 16, 20 to 40 by 5
MTTS28
8 x 1.25
D, F, T
16, 20 to 50 by 5
MTTS29
10 x 1.5
D, F, T
20 to 60 by 5
ANSI Metric Tapping

Screws
Name
Hex Head
30 - 11
Generic Part Name: MHTS

Notes:

Name
Nominal Dia.
Thr. Pitch
Types
L
Length
MHTS01
2.2 x 0.8
AB
4, 5, 6, 8, 10, 13
MHTS02
2.9 x 1
AB
6, 8, 10, 13, 16
MHTS03
3.5 x 1.3
AB
8, 10, 13, 16, 20, 25
MHTS04
4.2 x 1.4
AB
8, 10, 13, 16, 20, 25
MHTS05
4.8 x 1.6
AB
8, 10, 13, 16, 20 to 35 by 5
MHTS06
5.5 x 1.8
AB
13, 16, 20 to 40 by 5
MHTS07
6.3 x 1.8
AB
13, 16, 20 to 40 by 5
MHTS08
8 x 2.1
AB
16, 20 to 50 by 5
MHTS09
9.5 x 2.1
AB
20 to 60 by 5
MHTS10
2.2 x 0.8
B, BF, BT
4, 5, 6, 8, 10, 13
MHTS11
2.9 x 1
B, BF, BT
6, 8, 10, 13, 16
MHTS12
3.5 x 1.3
B, BF, BT
8, 10, 13, 16, 20, 25
MHTS13
4.2 x 1.4
B, BF, BT
8, 10, 13, 16, 20, 25
MHTS14
4.8 x 1.6
B, BF, BT
10, 13, 16, 20 to 35 by 5
MHTS15
5.5 x 1.8
B, BF, BT
13, 16, 20 to 40 by 5
MHTS16
6.3 x 1.8
B, BF, BT
13, 16, 20 to 40 by 5
MHTS17
8 x 2.1
B, BF, BT
16, 20 to 50 by 5
MHTS18
9.5 x 2.1
B, BF, BT
20 to 60 by 5
MHTS19
2 x 0.4
D, F, T
4, 5, 6, 8, 10, 13
MHTS20
2.5 x 0.45
D, F, T
4, 5, 6, 8, 10, 13, 16
MHTS21
3 x 0.5
D, F, T
6, 8, 10, 13, 16
MHTS22
3.5 x 0.6
D, F, T
6, 8, 10, 13, 16
MHTS23
4 x 0.7
D, F, T
8, 10, 13, 16, 20, 25
MHTS24
5 x 0.8
D, F, T
10, 13, 16, 20 to 40 by 5
MHTS25
6x1
D, F, T
13, 16, 20 to 40 by 5
30 - 12
Name
Nominal Dia.
Thr. Pitch
Types
L
Length
MHTS26
8 x 1.25
D, F, T
16, 20 to 50 by 5
MHTS27
10 x 1.5
D, F, T
20 to 60 by 5
Hex Flange Head
ANSI Metric Tapping

Screws
Generic Part Name: MFTS

Notes:

Name
Nominal Dia.
Thr. Pitch
Types
L
Length
MFTS01
2.2 x 0.8
AB
4, 5, 6, 8, 10, 13
MFTS02
2.9 x 1
AB
6, 8, 10, 13, 16
MFTS03
3.5 x 1.3
AB
8, 10, 13, 16, 20, 25
MFTS04
4.2 x 1.4
AB
8, 10, 13, 16, 20, 25
MFTS05
4.8 x 1.6
AB
8, 10, 13, 16, 20 to 35 by 5
MFTS06
5.5 x 1.8
AB
13, 16, 20 to 40 by 5
MFTS07
6.3 x 1.8
AB
13, 16, 20 to 40 by 5
MFTS08
8 x 2.1
AB
16, 20 to 50 by 5
30 - 13
Name
Nominal Dia.
Thr. Pitch
Types
L
Length
MFTS09
9.5 x 2.1
AB
20 to 60 by 5
MFTS10
2.2 x 0.8
B, BF, BT
4, 5, 6, 8, 10, 13
MFTS11
2.9 x 1
B, BF, BT
6, 8, 10, 13, 16
MFTS12
3.5 x 1.3
B, BF, BT
8, 10, 13, 16, 20, 25
MFTS13
4.2 x 1.4
B, BF, BT
8, 10, 13, 16, 20, 25
MFTS14
4.8 x 1.6
B, BF, BT
10, 13, 16, 20 to 35 by 5
MFTS15
5.5 x 1.8
B, BF, BT
13, 16, 20 to 40 by 5
MFTS16
6.3 x 1.8
B, BF, BT
13, 16, 20 to 40 by 5
MFTS17
8 x 2.1
B, BF, BT
16, 20 to 50 by 5
MFTS18
9.5 x 2.1
B, BF, BT
20 to 60 by 5
MFTS19
2 x 0.4
D, F, T
4, 5, 6, 8, 10, 13
MFTS20
2.5 x 0.45
D, F, T
4, 5, 6, 8, 10, 13, 16
MFTS21
3 x 0.5
D, F, T
6, 8, 10, 13, 16
MFTS22
3.5 x 0.6
D, F, T
6, 8, 10, 13, 16
MFTS23
4 x 0.7
D, F, T
8, 10, 13, 16, 20, 25
MFTS24
5 x 0.8
D, F, T
10, 13, 16, 20 to 40 by 5
MFTS25
6x1
D, F, T
13, 16, 20 to 40 by 5
MFTS26
8 x 1.25
D, F, T
16, 20 to 50 by 5
MFTS27
10 x 1.5
D, F, T
20 to 60 by 5
30 - 14
31
ANSI Metric Washers
31 - 1
Metric Plain Washers
Generic Part Name: MPW

Notes:
Corresponds to standard ANSI B18.22M-1981.
Name
Nominal
Diameter
Washer
Series
A
Inside
Diameter
B
Outside
Diameter
C
Thickness
MPW0101
1.600
NARROW
1.95
4.00
0.70
MPW0102
1.600
REGULAR
1.95
5.00
0.70
MPW0103
1.600
WIDE
1.95
6.00
0.90
MPW0201
2.000
NARROW
2.50
5.00
0.90
MPW0202
2.000
REGULAR
2.50
6.00
0.90
MPW0203
2.000
WIDE
2.50
8.00
0.90
MPW0301
2.500
NARROW
3.00
6.00
0.90
MPW0302
2.500
REGULAR
3.00
8.00
0.90
MPW0303
2.500
WIDE
3.00
10.00
1.20
MPW0401
3.000
NARROW
3.50
7.00
0.90
MPW0402
3.000
REGULAR
3.50
10.00
1.20
31 - 2
Nominal
Diameter
Washer
Series
A
Inside
Diameter
B
Outside
Diameter
C
Thickness
MPW0403
3.000
WIDE
3.50
12.00
1.40
MPW0501
3.500
NARROW
4.00
9.00
1.20
MPW0502
3.500
REGULAR
4.00
10.00
1.40
MPW0503
3.500
WIDE
4.00
15.00
1.75
MPW0601
4.000
NARROW
4.70
10.00
1.20
MPW0602
4.000
REGULAR
4.70
12.00
1.40
MPW0603
4.000
WIDE
4.70
16.00
2.30
MPW070
5.000
NARROW
5.60
11.00
1.40
MPW0702
5.000
REGULAR
5.60
15.00
1.75
MPW0703
5.000
WIDE
5.60
20.00
2.30
MPW0801
6.000
NARROW
6.65
13.00
1.75
MPW0802
6.000
REGULAR
6.65
18.80
1.75
MPW0803
6.000
WIDE
6.65
25.40
2.30
MPW0901
8.000
NARROW
8.90
18.80
2.30
MPW0902
8.000
REGULAR
8.90
25.40
2.30
MPW0903
8.000
WIDE
8.90
32.00
2.80
MPW1001
10.000
NARROW
10.85
20.00
2.30
MPW1002
10.000
REGULAR
10.85
28.00
2.80
MPW1003
10.000
WIDE
10.85
39.00
3.50
MPW1101
12.000
NARROW
13.30
25.40
2.80
MPW1102
12.000
REGULAR
13.30
34.00
3.50
MPW1103
12.000
WIDE
13.30
44.00
3.50
MPW1201
14.000
NARROW
15.25
28.00
2.80
MPW1202
14.000
REGULAR
15.25
39.00
3.50
MPW1203
14.000
WIDE
15.25
50.00
4.00
MPW1301
16.000
NARROW
17.25
32.00
3.50
MPW1302
16.000
REGULAR
17.25
44.00
4.00
MPW1303
16.000
WIDE
17.25
56.00
4.60
MPW1401
20.000
NARROW
21.80
39.00
4.00
MPW1402
20.000
REGULAR
21.80
50.00
4.60
ANSI Metric Washers
ANSI Metric Washers
Name
31 - 3
Name
Nominal
Diameter
Washer
Series
A
Inside
Diameter
B
Outside
Diameter
C
Thickness
MPW1403
20.000
WIDE
21.80
66.00
5.10
MPW1501
24.000
NARROW
25.60
44.00
4.60
MPW1502
24.000
REGULAR
25.60
56.00
5.10
MPW1503
24.000
WIDE
25.60
72.00
5.60
MPW1601
30.000
NARROW
32.40
56.00
5.10
MPW1602
30.000
REGULAR
32.40
72.00
5.60
MPW1603
30.000
WIDE
32.40
90.00
6.40
MPW1701
36.000
NARROW
38.30
66.00
5.60
MPW1702
36.000
REGULAR
38.30
90.00
6.40
MPW1703
36.000
WIDE
38.30
110.00
8.50
31 - 4
Section 4
ISO Fasteners and Standard

Parts
32
ISO External Drive Hex Bolts
and Screws
32 - 1
Hex Head Bolts, Grades A & B
Generic Part Name: IHBA

Notes:
Corresponds to standard ISO 4014 - 1988.

Name
Nominal
Dia. Thr
Pitch
Thread
Dia
Flat
Width
Head
Height
Length
Thread
Length
IHBA16
M1.6X0.35
1.6000
3.2000
1.2250
12, 16
IHBA17
M2X0.4
2.0000
4.0000
1.5250
16, 20
10
IHBA18
M2.5X0.45
2.5000
5.0000
1.8250
16, 20, 25
11
IHBA19
M3X0.5
3.0000
5.5000
2.1250
20 to 30 by 5
12
IHBA20
M4X0.7
4.0000
7.0000
2.9250
25 to 40 by 5
14
IHBA01
M5X0.8
5.0000
8.0000
3.6500
25 to 50 by 5
16
IHBA02
M6X1
6.0000
10.0000
4.1500
30 to 50 by 5, 60
18
IHBA03
M8X1.25
8.0000
13.0000
5.4500
40 to 70 by 5, 80
22
IHBA04
M10X1.5
10.0000
16.0000
6.5800
45 to 70 by 5,
80, 90, 100
26
IHBA05
M12X1.75
12.0000
18.0000
7.6800
50 to 70 by 5, 80
to 120 by 10
30
32 - 2
Name
Nominal
Dia. Thr
Pitch
Thread
Dia
Flat
Width
Head
Height
Length
Thread
Length
IHBA07
M16X2
16.0000
24.0000
10.1800
65, 70 to 160 by
10
38, 44
IHBA08
M20X2.5
20.0000
30.0000
12.7150
80 to 160 by 10,
180, 200
46, 52
IHBA09
M24X3
24.0000
36.0000
15.2150
90 to 160 by 10,
180 to 240 by 20
54, 60,
73
IHBA10
M30X3.5
30.0000
46.0000
19.1200
110 to 160 by
10, 180 to 300
by 20
66, 72,
85
IHBA11
M36X4
36.0000
55.0000
22.9200
140, 150, 160,

200 to 360 by 20
84, 97
IHBA12
M42X4.5
42.0000
65.0000
26.4200
160 to 440 by 20
96, 109
IHBA13
M48X5
48.0000
75.0000
30.4200
180 to 480 by 20
108,
121
IHBA14
M56X5.5
56.0000
85.0000
35.5000
220 to 500 by 20
137
IHBA15
M64X6
64.0000
95.0000
40.5000
260 to 500 by 20
153
ISO External Drive
Hex Bolts and
Hex Head Bolts, Reduced Shank
Generic Part Name: IHBR

Notes:
ISO External Drive Hex Bolts and Screws
32 - 3

Name
Nominal
dia. thr.
pitch
Thread
dia.
Body
Dia
Flat
Width
Head
Height
Length
Thr.
Lgth
IHBR19
M3X0.5
3.0000
2.6000
5.5000
2.2000
20 to 30
by 5
12
IHBR20
M4X0.7
4.0000
3.5000
7.0000
3.0000
20 to 40
by 5
14
IHBR01
M5X0.8
5.0000
4.4000
8.0000
3.7400
25 to 50
by 5
16
IHBR02
M6X1
6.0000
5.3000
10.0000
4.2400
25 to 50
by 5,
60
18
IHBR03
M8X1.25
8.0000
7.1000
13.0000
5.5400
30 to 60
by 5,
70, 80
22
IHBR04
M10X1.5
10.0000
8.9000
16.0000
6.6900
40 to 70
by 5,
80, 90,
100
26
IHBR05
M12X1.75
12.0000
10.7000
18.0000
7.7900
45 to 70
by 5, 80
to 120
by 10
30
IHBR07
M16X2
16.0000
14.5000
24.0000
10.2900
55 to 70
by 5, 80
to 150
by 10
38,
44
IHBR08
M20X2.5
20.0000
18.2000
30.0000
12.8500
65,
70 to
150
by 10
46,
52
32 - 4
Hex Head Bolts, Grade C
Generic Part Name: IHBC

Notes:

Nominal
dia. thr.
pitch
Thread
dia
Flat_
Width
Head_
Height
Length
Thread_
Length
IHBC01
M5X0.8
5.0000
8.0000
3.8750
25 to 50 by 5
16
IHBC02
M6X1
6.0000
10.0000
4.3750
30 to 50 by 5, 60
18
IHBC03
M8X1.25
8.0000
13.0000
5.6750
40 to 70 by 5, 80
22
IHBC04
M10X1.5
10.0000
16.0000
6.8500
45 to 70 by 5,
80, 90, 100
26
IHBC05
M12X1.75
12.0000
18.0000
7.9500
55 to 70 by 5, 80
to 120 by 10
30
IHBC07
M16X2
16.0000
24.0000
10.7500
65, 70 to 160 by
10
38, 44
IHBC08
M20X2.5
20.0000
30.0000
13.4000
80 to 160 by 10,
180, 200
46, 52
IHBC09
M24X3
24.0000
36.0000
15.9000
100 to 160 by
10, 180 to 240
by 20
54, 60, 73
32 - 5
ISO External Drive

Hex Bolts and
Name
Name
Nominal
dia. thr.
pitch
Thread
dia
Flat_
Width
Head_
Height
Length
Thread_
Length
IHBC10
M30X3.5
30.0000
46.0000
19.7500
120 to 160 by
10, 180 to 300
by 20
66, 72, 85
IHBC11
M36X4
36.0000
55.0000
23.5500
140, 150, 160

to 360 by 20
84, 97
IHBC12
M42X4.5
42.0000
65.0000
27.0500
180 to 420 by 20
96, 109
IHBC13
M48X5
48.0000
75.0000
31.0500
200 to 480 by 20
108, 121
IHBC14
M56X5.5
56.0000
85.0000
36.2500
240 to 500 by 20
137
IHBC15
M64X6
64.0000
95.0000
41.2500
260 to 500 by 20
153
Hex Head Screws, Grades A & B
Generic Part Name: IHSA

Notes:
32 - 6

Nominal
Dia. Thr
Pitch
Thread
Dia
Flat
Width
Head
Height
Thread
Dist
Length
IHSA16
M1.6X0.35
1.6000
3.2000
1.2250
1.0500
2 to 6 by 1, 8,
10, 12, 16
IHSA17
M2X0.4
2.0000
4.0000
1.5250
1.2000
4, 5, 6 to 12 by
2, 16, 20
IHSA18
M2.5X0.45
2.5000
5.0000
1.8250
1.3500
5, 6 to 12 by 2,
16, 20, 25
IHSA19
M3X0.5
3.0000
5.5000
2.1250
1.5000
6 to 12 by 2,
16, 20, 25, 30
IHSA20
M4X0.7
4.0000
7.0000
2.9250
2.1000
8, 10, 12, 16,

20 to 40 by 5
IHSA01
M5X0.8
5.0000
8.0000
3.6500
2.4000
10, 12, 16, 20

to 50 by 5
IHSA02
M6X1
6.0000
10.0000
4.1500
3.0000
12, 16, 20 to
60 by 5
IHSA03
M8X1.25
8.0000
13.0000
5.4500
4.0000
16, 20 to 70 by
5, 80
IHSA04
M10X1.5
10.0000
16.0000
6.5800
4.5000
20 to 70 by 5,
80, 90, 100
IHSA05
M12X1.75
12.0000
18.0000
7.6800
5.3000
25 to 70 by 5,
80 to 120 by
10
IHSA07
M16X2
16.0000
24.0000
10.1800
6.0000
30 to 70 by 5,
80 to 160 by
10, 180, 200
IHSA08
M20X2.5
20.0000
30.0000
12.7150
7.5000
40 to 70 by 5,
80 to 160 by
10, 180, 200
IHSA09
M24X3
24.0000
36.0000
15.2150
9.0000
50 to 70 by 5,
80 to 160 by
10, 180, 200
IHSA10
M30X3.5
30.0000
46.0000
19.1200
10.5000
60, 65, 70 to
160 by 10,
180, 200
IHSA11
M36X4
36.0000
55.0000
22.9200
12.0000
70 to 160 by
10, 180, 200
32 - 7
ISO External Drive

Hex Bolts and
Name
Name
Nominal
Dia. Thr
Pitch
Thread
Dia
Flat
Width
Head
Height
Thread
Dist
Length
IHSA12
M42X4.5
42.0000
65.0000
26.4200
13.5000
80 to 160 by
10, 180, 200
IHSA13
M48X5
48.0000
75.0000
30.4200
15.0000
100 to 160 by
10, 180, 200
IHSA14
M56X5.5
56.0000
85.0000
35.5000
16.5000
110 to 160 by
10, 180, 200
IHSA15
M64X6
64.0000
95.0000
40.5000
18.0000
120 to 160 by
10, 180, 200
Hex Head Screws, Grade C
Generic Part Name: IHSC

Notes:

Name
Nominal
dia. thr.
pitch
Thread
dia.
Flat
Width
Head
Height
Thread
dist.
Length
IHSC01
M5X0.8
5.0000
8.0000
3.8750
2.4000
10, 12, 16, 20

to 50 by 5
32 - 8
Nominal
dia. thr.
pitch
Thread
dia.
Flat
Width
Head
Height
Thread
dist.
Length
IHSC02
M6X1
6.0000
10.0000
4.3750
3.0000
12, 16, 20 to
60 by 5
IHSC03
M8X1.25
8.0000
13.0000
5.6750
4.0000
16, 20 to 70 by
5, 80
IHSC04
M10X1.5
10.0000
16.0000
6.8500
4.5000
20 to 70 by 5,
80, 90, 100
IHSC05
M12X1.75
12.0000
18.0000
7.9500
5.3000
25 to 70 by 5,
80 to 120 by
10
IHSC07
M16X2
16.0000
24.0000
10.7500
6.0000
30 to 70 by 5,
80 to 160 by
10
IHSC08
M20X2.5
20.0000
30.0000
13.4000
7.5000
40 to 70 by 5,
80 to 160 by
10, 180, 200
IHSC09
M24X3
24.0000
36.0000
15.9000
9.0000
50 to 70 by 5,
80 to 160 by
10, 180 to 240
by 20
IHSC10
M30X3.5
30.0000
46.0000
19.7500
10.5000
60, 65, 70 to
160 by 10, 180
to 300 by 20
IHSC11
M36X4
36.0000
55.0000
23.5500
12.0000
70 to 160 by
10, 180 to 360
by 20
IHSC12
M42X4.5
42.0000
65.0000
27.0500
13.5000
80 to 160 by
10, 180 to 420
by 20
IHSC13
M48X5
48.0000
75.0000
31.0500
15.0000
100 to 160 by
10, 180 to 480
by 20
IHSC14
M56X5.5
56.0000
85.0000
36.2500
16.5000
110 to 160 by
10, 180 to 500
by 20
IHSC15
M64X6
64.0000
95.0000
41.2500
18.0000
120 to 160 by
10, 180 to 500
by 20
32 - 9
ISO External Drive

Hex Bolts and
Name
Hex Flange Bolts, Small Series
Generic Part Name: IHFBS

Notes:

Name
Nominal
Dia. Thr.
Pitch
Thread
Dia
Flat
Width
Head
Height
Flange
Dia
Flange
Thick
Length
Thr.
Lgh
IHFBS01
M5X0.8
5.0000
7.0000
5.6000
11.4000
1.00000
25 to
50 by 5
16
IHFBS02
M6X1
6.0000
8.0000
6.8000
13.6000
1.10000
30 to
60 by 5
18
IHFBS03
M8X1.25
8.0000
10.0000
8.5000
17.0000
1.20000
35 to
70 by 5,
80
22
IHFBS04
M10X1.5
10.0000
13.0000
9.7000
20.8000
1.50000
40 to
70 by 5,
80, 90,
100
26
IHFBS05
M12X1.75
12.0000
15.0000
11.9000
24.7000
1.80000
45 to
70 by 5,
80 to
120 by
10
30
32 - 10
Name
Nominal
Dia. Thr.
Pitch
Thread
Dia
Flat
Width
Head
Height
Flange
Dia
Flange
Thick
Length
Thr.
Lgh
IHFBS06
M16X2
16.0000
21.0000
15.1000
32.8000
2.40000
55 to
70 by 5,
80 to
160 by
10
38,
44
Hex High-Strength Bolts, Regular Thread

Length
ISO External Drive

Hex Bolts and
Generic Part Name: IHBHL

Notes:

Name
Nominal
dia. thr
pitch
Thread
dia
Flat
Width
Head
Height
Length
Thread
Length
IHBHL01
M12X1.75
12.0000
21.0000
7.9500
35 to 100 by 5
30
IHBHL02
M16X2
16.0000
27.0000
10.7500
40 to 95 by 5,
100 to 150 by 10
38, 44
32 - 11
Name
Nominal
dia. thr
pitch
Thread
dia
Flat
Width
Head
Height
Length
Thread
Length
IHBHL03
M20X2.5
20.0000
34.0000
13.4000
45 to 95 by 5,
100 to 150 by 10
40, 46,
52
IHBHL04
M24X3
24.0000
41.0000
15.9000
55 to 95 by 5,
100 to 200 by 10
54, 60
IHBHL05
M30X3.5
30.0000
50.0000
19.7500
70 to 95 by 5,
100 to 200 by 10
66, 72
IHBHL06
M36X4
36.0000
60.0000
23.5500
85, 90, 95, 100

to 200 by 10
78, 84
Hex High-Strength Bolts, Short Thread Length
Generic Part Name: IHBHS

Notes:

Name
Nominal
Dia. Thr.
Pitch
Thread
Dia
Flat
Width
Head
Height
Length
Thread
Length
IHBHS01
M12X1.75
12.0000
21.0000
7.9500
40 to 100 by 5
25
32 - 12
Name
Nominal
Dia. Thr.
Pitch
Thread
Dia
Flat
Width
Head
Height
Length
Thread
Length
IHBHS02
M16X2
16.0000
27.0000
10.7500
45 to 95 by 5,
100 to 150 by 10
31, 38
IHBHS03
M20X2.5
20.0000
34.0000
13.4000
55 to 95 by 5,
100 to 150 by 10
36, 43
IHBHS04
M24X3
24.0000
41.0000
15.9000
65 to 95 by 5,
100 to 200 by 10
41, 48
IHBHS05
M30X3.5
30.0000
50.0000
19.7500
80, 90, 95, 100

to 200 by 10
49, 56
IHBHS06
M36X4
36.0000
60.0000
23.5500
90, 95, 100 to

200 by 10
56, 63
Hex Head Screws, Metric Fine Pitch Thread,

Grades A & B
ISO External Drive

Hex Bolts and
Generic Part Name: IHSF

Notes:

32 - 13
Name
Nominal
Dia. Thr.
Pitch
Thread
Dia.
Flat
Width
Head
Height
Thread
Dist
Length
IHSF01
M8X1
8.0000
13.0000
5.4500
3.0000
16, 20 to 70 by
5, 80
IHSF02
M10X1
10.0000
16.0000
6.5800
3.0000
20 to 70 by 5,
80, 90, 100
IHSF03
M12X1.5
12.0000
18.0000
7.6800
4.5000
25 to 70 by 5, 80
to 120 by 10
IHSF04
M16X1.5
16.0000
24.0000
10.1800
4.5000
35 to 70 by 5, 80
to 160 by 10
IHSF05
M20X1.5
20.0000
30.0000
12.7150
6.0000
40 to 70 by 5, 80
to 160 by 10,
180, 200
IHSF07
M24X2
24.0000
36.0000
15.3500
6.0000
40 to 70 by 5, 80
to 160 by 10,
180, 200
IHSF08
M30X2
30.0000
46.0000
19.1200
6.0000
40 to 70 by 5, 80
to 160 by 10,
180, 200
IHSF09
M36X3
36.0000
55.0000
22.9200
9.0000
40 to 70 by 5, 80
to 160 by 10,
180, 200
IHSF10
M42X3
42.0000
65.0000
26.4200
9.0000
90 to 160 by 10,
180 to 420 by 20
IHSF11
M48X3
48.0000
75.0000
30.4200
9.0000
100 to 160 by
10, 180 to 480
by 20
IHSF12
M56X4
56.0000
85.0000
35.5000
12.0000
120 to 160 by
10, 180 to 500
by 20
IHSF13
M64X4
64.0000
95.0000
40.5000
12.0000
130 to 160 by
10, 180 to 500
by 20
32 - 14
Hex Head Bolts, Metric Fine Pitch Thread,

Grades A & B
Generic Part Name: IHBF

Notes:

Name
Nominal
Dia. Thr.
Pitch
Thread
Dia
Flat
Width
Head
Height
Length
Thread
Length
IHBF01
M8X1
8.0000
13.0000
5.4500
40 to 70 by 5, 80
22
IHBF02
M10X1
10.0000
16.0000
6.5800
45 to 70 by 5,
80, 90, 100
26
IHBF03
M12X1.5
12.0000
18.0000
7.6800
50 to 70 by 5, 80
to 120 by 10
30
IHBF04
M16X1.5
16.0000
24.0000
10.1800
65, 70 to 160 by
10
38, 44
IHBF05
M20X1.5
20.0000
30.0000
12.7150
80 to 160 by 10,
180, 200
46, 52
32 - 15
ISO External Drive

Hex Bolts and
Name
Nominal
Dia. Thr.
Pitch
Thread
Dia
Flat
Width
Head
Height
Length
Thread
Length
IHBF07
M24X2
24.0000
36.0000
15.3500
100 to 160 by
10, 180 to 240
by 20
54, 60,
73
IHBF08
M30X2
30.0000
46.0000
19.1200
120 to 160 by
10, 180 to 300
by 20
60, 72,
85
IHBF09
M36X3
36.0000
55.0000
22.9200
140 to 160 by
10, 180 to 360
by 20
84, 97
IHBF10
M42X3
42.0000
65.0000
26.4200
160 to 440 by 20
96, 109
IHBF11
M48X3
48.0000
75.0000
30.4200
200 to 480 by 20
108,
121
IHBF12
M56X4
56.0000
85.0000
35.5000
220 to 500 by 20
137
IHBF13
M64X4
64.0000
95.0000
40.5000
260 to 500 by 20
153
32 - 16
33
ISO Square Neck Bolts
33 - 1
Cup Head Square Neck Bolts, Grade C, Large

Head
Generic Part Name: ISNBL

Notes:

Name
Nominal
dia. thr.
pitch
Thread
dia
Head
Dia
Head
Height
Sqr
Width
Sqr
Length
Length
Thr.
Lngth.
ISNBL01
M5X0.8
5.0000
13.0000
3.1000
5.4800
4.1000
20 to
50 by 5
16
ISNBL02
M6X1
6.0000
16.0000
3.6000
6.4800
4.6000
30 to
60 by 5
18
ISNBL03
M8X1.25
8.0000
20.0000
4.8000
8.5800
5.6000
40 to
80 by 5
22
ISNBL04
M10X1.5
10.0000
24.0000
5.8000
10.5800
6.6000
45 to
75 by 5,
80, 90,
100
26
33 - 2
Name
Nominal
dia. thr.
pitch
Thread
dia
Head
Dia
Head
Height
Sqr
Width
Sqr
Length
Length
Thr.
Lngth.
ISNBL05
M12X1.75
12.0000
30.0000
6.8000
12.7000
8.8000
55 to
75 by 5,
80 to
120 by
10
30
ISNBL06
M16X2
16.0000
38.0000
8.9000
16.7000
12.9000
65, 70,
75, 80
to 160
by 10,
180,
200
38, 44
ISNBL07
M20X2.5
20.0000
46.0000
10.9000
20.8400
15.9000
75, 80
to 160
by 10,
180,
200
46, 52
Cup Head Square Neck Bolts, Grade B, Small

Head
ISO Square Neck
Bolts
Generic Part Name: ISNBS

Notes:
ISO Square Neck Bolts
33 - 3

NAME
NOMINAL
_DIA_THR
_PITCH
thread
dia
head_
dia
head_
height
sqr_
width
sqr_
length
ISNBS01
M6X1
6.0000
14.2000
3.6000
6.4800
3.0000
12, 16, 20 to
60 by 5
7, 11, 15
to 45 by
5, 18
ISNBS02
M8X1.25
8.0000
18.0000
4.8000
8.5800
3.0000
16, 20 to 65
by 5, 70, 80
10.5,
14.5 to
44.5 by
5, 22
ISNBS03
M10X1.5
10.000
0
22.3000
5.8000
10.580
0
4.0000
20 to 65 by
5, 70 to 100
by 10
13 to 43
by 5, 26
ISNBS04
M12X1.75
12.000
0
26.6000
6.8000
12.700
0
4.0000
20 to 65 by
5, 70 to 120
by 10
12.5 to
42.5 by
5, 30
ISNBS05
M16X2
16.000
0
35.0000
8.9000
16.700
0
5.0000
30 to 65 by
5, 70 to 160
by 10
21 to 51
by 5, 38,
44
ISNBS06
M20X2.5
20.000
0
43.0000
10.900
0
20.840
0
5.0000
35 to 65 by
5, 70 to 160
by 10
25 to 60
by 5, 46,
52
33 - 4
length
thread_
length
34
ISO Hex Socket Head Screws
34 - 1
34 - 2
Hex Socket Head Cap Screws, Grade A
Generic Part Name: ISHCS

Notes:
Name
Nominal
Dia.thr.
Pitch
Thread
Dia.
Head
Dia.
Head
Hght.
Flat
Width
Length
Thread
Length
ISHCS01
M1.6X0.35
1.6000
3.0000
1.6000
1.5600
2.5, 3, 4, 5,
6 to 12 by 2,
16
1.45, 1.95, 2.95, 3.95,

4.95 to 10.95 by 2,
14.95
34 - 3
Nominal
Dia.thr.
Pitch
Thread
Dia.
Head
Dia.
Head
Hght.
Flat
Width
Length
Thread
Length
ISHCS02
M2X0.4
2.0000
3.8000
2.0000
1.5600
3, 4, 5, 6 to 12 by
2, 16, 20
1.8, 2.8, 3.8,

4.8 to 10.8 by 2,
14.8, 16
ISHCS03
M2.5X0.45
2.5000
4.5000
2.5000
2.0600
4, 5, 6 to 12 by 2,
16, 20, 25
2.65, 3.65,
4.65 to 10.65 by 2,
14.65, 17, 18.65
ISHCS04
M3X0.5
3.0000
5.5000
3.0000
2.5800
5, 6 to 12 by 2,
16, 20, 25, 30
3.5, 4.5 to 10.5 by 2,

14.5, 18, 18.5
ISHCS05
M4X0.7
4.0000
7.0000
4.0000
3.0800
6 to 12 by 2, 16,
20 to 40 by 5
3.9 to 9.9 by 2, 13.9,

17.9, 20, 22.9
ISHCS06
M5X0.8
5.0000
8.5000
5.0000
4.0950
8, 10, 12, 16, 20

to 50 by 5
5.6 to 9.6 by 2, 13.6,

17.6, 22, 22.6
ISHCS07
M6X1
6.0000
10.0000
6.0000
5.1400
10, 12, 16, 20 to

60 by 5
7, 9, 13, 17, 22, 24, 27
ISHCS08
M8X1.25
8.0000
13.0000
8.0000
6.1400
12, 16,
20 to 70 by 5, 80
8.25, 12.25,
16.25 to 31.25 by 5, 28
ISHCS09
M10X1.5
10.0000
16.0000
10.0000
8.1750
16, 20 to 70 by 5,
80, 90, 100
11.5,
15.5 to 35.5 by 5, 32
ISHCS10
M12X1.75
12.0000
18.0000
12.0000
10.1750
20 to 70 by 5,
80 to 120 by 10
14.75 to 44.75 by 5, 36
ISHCS11
M16X2
16.0000
24.0000
16.0000
14.2120
25 to 70 by 5,
80 to 160 by 10
19 to 54 by 5
ISHCS12
M20X2.5
20.0000
30.0000
20.0000
17.2300
30 to 70 by 5,
80 to 160 by 10,
180, 200
22.5 to 62.5 by 5, 52
ISO Hex Socket Head

Screws
Name
34 - 4
Name
Nominal
Dia.thr.
Pitch
Thread
Dia.
Head
Dia.
Head
Hght.
Flat
Width
Length
Thread
Length
ISHCS13
M24X3
24.0000
36.0000
24.0000
19.2750
40 to 70 by 5,
80 to 160 by 10,
180, 200
31 to 66 by 5, 60
ISHCS14
M30X3.5
30.0000
45.0000
30.0000
22.2750
45 to 70 by 5,
80 to 160 by 10,
180, 200
34.5 to 59.5 by 5, 69.5,

72, 79.5, 89.5
ISHCS15
M36X4
36.0000
54.0000
36.0000
27.2750
55 to 70 by 5,
80 to 160 by 10,
180, 200
43 to 58 by 5,
68 to 98 by 10, 84
Hex Socket Head Shoulder Screws

Generic Part Name: ISHSS

Notes:
Name
Nom.
Size
Shoulder
Dia
Head
Dia
Head
Height
Flat
Width
Thread
Dia
Thread
Length
Length
ISHSS01
6.5000
6.4870
10.0000
4.5000
3.0800
5.0000
9.7500
10, 12, 16, 20, 25,

30, 40
ISHSS02
8.0000
7.9870
13.0000
5.5000
4.0950
6.0000
11.2500
12, 16, 20, 25, 30,

40, 50
ISHSS03
10.0000
9.9870
16.0000
7.0000
5.0950
8.0000
13.2500
16, 20, 25, 30 to 100

by 10, 120
ISHSS04
13.0000
12.9840
18.0000
9.0000
6.0950
10.0000
16.4000
16, 20, 25, 30 to 100

by 10, 120
ISHSS05
16.0000
15.9840
24.0000
11.0000
8.1150
12.0000
18.4000
30 to 100 by 10, 120
ISHSS06
20.0000
19.9800
30.0000
14.0000
10.1150
16.0000
22.4000
40 to 100 by 10, 120
ISHSS07
25.0000
24.9800
36.0000
16.0000
12.1420
20.0000
27.4000
50 to 100 by 10, 120
34 - 5
ISO Hex Socket Head

Screws
34 - 6
Hex Socket Button Head Screws (Metric Series)
Generic Part Name: ISHBS

Notes:
Name
Nominal
Size Thr
Pitch
Thread
Dia
Thread
Dist
Head
Dia
Head
Height
Flat
Width
Length
ISHBS01
M3X0.5
3.0000
1.00000
5.7000
1.65000
2.0450
6, 8, 10, 12
ISHBS02
M4X0.7
4.0000
1.40000
7.6000
2.20000
2.5600
8, 10, 12, 16
ISHBS03
M5X0.8
5.0000
1.60000
9.5000
2.75000
3.0800
10, 12, 16, 20, 25, 30
Name
Nominal
Size Thr
Pitch
Thread
Dia
Thread
Dist
Head
Dia
Head
Height
Flat
Width
Length
ISHBS04
M6X1
6.0000
2.00000
10.5000
3.30000
4.0950
10, 12, 16, 20, 25, 30
ISHBS05
M8X1.25
8.0000
2.50000
14.0000
4.40000
5.0950
10, 12, 16, 20 to 40 by 5
ISHBS06
M10X1.5
10.0000
3.00000
17.5000
5.50000
6.0950
16, 20 to 40 by 5
ISHBS07
M12X1.75
12.0000
3.50000
21.0000
6.60000
8.1150
16, 20 to 50 by 5
ISHBS08
M16X2
16.0000
4.00000
28.0000
8.80000
10.1150
25 to 50 by 5
34 - 7
ISO Hex Socket Head

Screws
34 - 8
35
ISO Slotted Head Screws
35 - 1
Slotted Cheese Head Screws, Grade A
Generic Part Name: ISLGS

Notes:

Name
Nom.
Dia Thr
Pitch
Thread
Dia
Head
Dia
Head
Height
Length
Thread
Length
ISLGS01
M4X0.7
4.0000
7.0000
2.60000
5, 6 to 12
by 2, 16,
20 to 40 by 5
3.6, 4.6 to
10.6 by 2,
14.6, 18.6 to
38.6 by 5
ISLGS02
M5X0.8
5.0000
8.5000
3.30000
6 to 12 by 2,
16, 20 to 50
by 5
4.4 to 10.4
by 2, 14.4,
18.4 to 38.4
by 5, 38
ISLGS03
M6X1
6.0000
10.0000
3.90000
8, 10, 12, 16,

20 to 50 by
5, 60
6, 8, 10, 14,
18 to 38 by 5
ISLGS04
M8X1.25
8.0000
13.0000
5.00000
10, 12, 16,

20 to 50 by
5, 60, 70, 80
7.5, 9.5 to
17.5 by 4,
22.5 to 37.5
by 5, 38
35 - 2
Nom.
Dia Thr
Pitch
Thread
Dia
Head
Dia
Head
Height
Length
Thread
Length
ISLGS05
M10X1.5
10.0000
16.0000
6.00000
12, 16, 20 to
50 by 5, 60,
70, 80
9, 13, 17, 22
to 37 by 5,
38
Slotted Pan Head Screws, Grade A
Generic Part Name: ISLPS

Notes:

Name
Nom
Dia Thr
Pitch
Thread
Dia
Head
Dia
Head
Height
Length
Thread
Length
ISLPS01
M1.6X0.35
1.6000
3.2000
1.00000
2, 2.5, 3, 4,
5, 6, 8, 10,
12, 16
1.3, 1.8, 2.3

to 7.3 by 1,
9.3, 11.3,
15.3
35 - 3
ISO Slotted Head

Screws
Name
Name
Nom
Dia Thr
Pitch
Thread
Dia
Head
Dia
Head
Height
Length
Thread
Length
ISLPS02
M2X0.4
2.0000
4.0000
1.30000
2.5, 3, 4,
5, 6, 8, 10,
12, 16, 20
1.7, 2.2 to
7.2 by 1, 9.2,
11.2, 15.2,
19.2
ISLPS03
M2.5X0.45
2.5000
5.0000
1.50000
3, 4, 5, 6,
8, 10, 12,
16, 20, 25
2.1 to 5.1 by
1, 7.1, 9,1,
11.1, 15.1,
19.1, 24.1
ISLPS04
M3X0.5
3.0000
5.6000
1.80000
4, 5, 6 to
12 by 2,
16, 20, 25,
30
3, 4, 5, 7, 9,
11, 15, 19,
24, 29
ISLPS05
M4X0.7
4.0000
8.0000
2.40000
5, 6 to 12
by 2, 16,
20 to 40 by
5
3.6, 4.6 to
10.6 by 2,
14.6, 18.6,
23.6 to 38.6
by 5
ISLPS06
M5X0.8
5.0000
9.5000
3.00000
6 to 12 by
2, 16, 20 to
50 by 5
4.4 to 10.4
by 2, 14.4,
18.4, 23.4 to
38.4 by 5, 38
ISLPS07
M6X1
6.0000
12.0000
3.60000
8, 10, 12,
16, 20 to
50 by 5, 60
6, 8, 10, 14,
18 to 38 by 5
ISLPS08
M8X1.25
8.0000
16.0000
4.80000
10, 12, 16,

20 to 50 by
5, 60, 70,
80
7.5, 9.5 to
17.5 by 4,
22.5 to 37.5
by 5, 38
ISLPS09
M10X1.5
10.0000
20.0000
6.00000
12, 16, 20
to 50 by 5,
60, 70, 80
9, 13, 17, 22
to 37 by 5,
38
35 - 4
Generic Part Name: ISLCS

Notes:

Name
Nominal
Dia Thr
Pitch
Thread
Dia
Head
Dia
Theor
Head
Dia Act
Length
ISLCS01
M1.6X0.35
1.6000
3.6000
3.0000
2.5, 3, 4, 5,
6 to 12 by 2, 16
ISLCS02
M2X0.4
2.0000
4.4000
3.8000
3, 4, 5, 6 to 12 by
2, 16, 20
ISLCS03
M2.5X0.45
2.5000
5.5000
4.7000
4, 5, 6 to 12 by 2,
16, 20, 25
ISLCS04
M3X0.5
3.0000
6.3000
5.5000
5, 6 to 12 by 2, 16,
20, 25, 30
ISLCS05
M4X0.7
4.0000
9.4000
8.4000
5, 6 to 12 by 2,
16, 20 to 40 by 5
35 - 5
ISO Slotted Head

Screws
Slotted Countersunk Head Screws, Grade A
Name
Nominal
Dia Thr
Pitch
Thread
Dia
Head
Dia
Theor
Head
Dia Act
Length
ISLCS06
M5X0.8
5.0000
10.4000
9.3000
8, 10, 12, 16, 20 to

50 by 5
ISLCS07
M6X1
6.0000
12.6000
11.3000
8, 10, 12, 16, 20 to

50 by 5, 60
ISLCS08
M8X1.25
8.0000
17.3000
15.8000
10, 12, 16, 20 to 50

by 5, 60, 70, 80
ISLCS09
M10X1.5
10.0000
20.0000
18.3000
12, 16, 20 to 50 by
5, 60, 70, 80
Slotted Raised Countersunk Head Screws,

Grade A
Generic Part Name: ISLRS

Notes:
35 - 6

Nominal
Dia Thr
Pitch
Thread
Dia
Head
Dia
Theor
Head
Dia
Act
Head
Height
Length
ISLRS01
M1.6X0.35
1.6000
3.6000
3.0000
0.4000
2.5, 3, 4, 5, 6
to 12 by 2, 16
ISLRS02
M2X0.4
2.0000
4.4000
3.8000
0.5000
3, 4, 5, 6 to
12 by 2, 16,
20
ISLRS03
M2.5X0.45
2.5000
5.5000
4.7000
0.6000
4, 5, 6 to 12
by 2, 16, 20,
25
ISLRS04
M3X0.5
3.0000
6.3000
5.5000
0.7000
5, 6 to 12 by
2, 16, 20, 25,
30
ISLRS05
M4X0.7
4.0000
9.4000
8.4000
1.0000
5, 6 to 12 by
2, 16, 20 to
40 by 5
ISLRS06
M5X0.8
5.0000
10.4000
9.3000
1.2000
8, 10, 12, 16,

20 to 50 by 5
ISLRS07
M6X1
6.0000
12.6000
11.3000
1.4000
8, 10, 12, 16,

20 to 50 by 5,
60
ISLRS08
M8X1.25
8.0000
17.3000
15.8000
2.0000
10, 12, 16,

20 to 50 by 5,
60, 70, 80
ISLRS09
M10X1.5
10.0000
20.0000
18.3000
2.3000
12, 16, 20 to
50 by 5, 60,
70, 80
35 - 7
ISO Slotted Head

Screws
Name
35 - 8
36
ISO Cross Recessed Head
Screws
36 - 1
36 - 2
Cross Recessed Pan Head Screws, Grade A
Generic Part Name: ICRPS

Notes:
Name
Nom
Dia Thr
Pitch
Thread
Dia
Head
Dia
Head
Height
Length
Thread Length
ICRPS01
M1.6X0.35
1.6000
3.2000
1.30000
3, 4, 5,
6 to 12 by 2, 16
2.3, 3.3, 4.3,

5.3 to 11.3 by 2, 15.3
ICRPS02
M2X0.4
2.0000
4.0000
1.60000
3, 4, 5, 6 to 12 by 2,
16, 20
2.2, 3.2, 4.2,

5.2 to 11.2 by 2, 15.2, 19.2
ISO Cross Recessed Head Screws
Name
Nom
Dia Thr
Pitch
Thread
Dia
Head
Dia
Head
Height
Length
Thread Length
ICRPS03
M2.5X0.45
2.5000
5.0000
2.10000
3, 4, 5, 6 to 12 by 2,
16, 20, 25
2.1, 3.1, 4.1,

5.1 to 11.1 by 2, 15.1,
19.1, 24.1
ICRPS04
M3X0.5
3.0000
5.6000
2.40000
4, 5, 6 to 12 by 2,
16, 20, 25, 30
3, 4, 5 to 11 by 2, 15, 19,
24, 25
ICRPS05
M4X0.7
4.0000
8.0000
3.10000
5, 6 to 12 by 2, 16,
20 to 40 by 5
3.6, 4.6 to 10.6 by 2, 14.6,

18.6 to 38.6 by 5
ICRPS06
M5X0.8
5.0000
9.5000
3.70000
6 to 12 by 2,
16, 20 to 45 by 5
4.4 to 10.4 by 2, 14.4,

18.4 to 38.4 by 5, 38
ICRPS07
M6X1
6.0000
12.0000
4.60000
8, 10, 12, 16,

20 to 50 by 5, 60
6 to 10 by 2, 14,
18 to 38 by 5
ICRPS08
M8X1.25
8.0000
16.0000
6.00000
10, 12, 16,

20 to 50 by 5, 60
7.5, 9.5, 13.5,

17.5 to 37.5 by 5, 38
ICRPS09
M10X1.5
10.0000
20.0000
7.50000
12, 16,
20 to 50 by 5, 60
9, 13, 17 to 37 by 5, 38
36 - 3
ISO Cross Recessed

Head Screws
36 - 4
Cross Recessed Countersunk Flat Head Screws, Property Class

4.8
Generic Part Name: ICRFC

Notes:
Name
Nom
Dia Thr
Pitch
Thread
Dia
Head
Dia
Head
Dia
Act
Length
Thread Length
ICRFC01
M1.6X.35
1.6000
3.6000
3.0000
3, 4, 5, 6 to 12 by 2, 16
1.3, 2.3, 3.3,

4.3 to 10.3 by 2, 14.3
Name
Nom
Dia Thr
Pitch
Thread
Dia
Head
Dia
Head
Dia
Act
Length
Thread Length
ICRFC02
M2X0.4
2.0000
4.4000
3.8000
3, 4, 5, 6 to 12 by 2, 16,
20
1, 2, 3, 4 to 10 by 2, 14,
18,
ICRFC03
M2.5X0.45
2.5000
5.5000
4.7000
3, 4, 5, 6 to 12 by 2, 16,
20, 25
0.6, 1.6, 2.6,

3.6 to 9.6 by 2, 13.6,
17.6, 22.6
ICRFC04
M3X0.5
3.0000
6.3000
5.5000
4, 5, 6 to 12 by 2, 16,
20, 25, 30
1.35, 2.35,
3.35 to 9.35 by 2,
13.35, 17.35, 22.35,
27.35
ICRFC05
M4X0.7
4.0000
9.4000
8.4000
5, 6 to 12 by 2, 16,
20 to 40 by 5
0.9, 1.9,
3.9 to 11.9 by 2,
15.9 to 35.9 by 5
ICRFC06
M5X0.8
5.0000
10.4000
9.3000
6 to 12 by 2, 16,
20 to 50 by 5
1.7 to 7.7 by 2, 11.7,

15.7 to 40.7 by 5, 38
ICRFC07
M6X1
6.0000
12.6000
11.3000
8, 10, 12, 16,

20 to 50 by 5, 60
2.7, 4.7, 6.7, 10.7,

14.7 to 39.7 by 5, 38
ICRFC08
M8X1.25
8.0000
17.3000
15.8000
10, 12, 16,

20 to 50 by 5, 60
2.85, 4.85, 8.85,

12.85 to 37.85 by 5, 38
ICRFC09
M10X1.5
10.0000
20.0000
18.3000
12, 16,
20 to 50 by 5, 60
4, 8, 12 to 37 by 5, 38
36 - 5
ISO Cross Recessed

Head Screws
36 - 6
Cross Recessed Countersunk Flat Head Screws, Property Class

8.8
Generic Part Name: ICRFS

Notes:
Corresponds to standard ISO 7046 - 2 - 1990.
Name
Nom
Dia Thr
Pitch
Thread
Dia
Head
Dia
Head
Dia
Act
Length
Thread
Length
ICRFS01
M2X0.4
2.0000
4.4000
3.8000
3, 4, 5, 6 to 12 by 2, 16, 20
1, 2, 3, 4 to 10 by 2, 14, 18
Name
Nom
Dia Thr
Pitch
Thread
Dia
Head
Dia
Head
Dia
Act
Length
Thread
Length
ICRFS02
M2.5X0.45
2.5000
5.5000
4.7000
3, 4, 5, 6 to 12 by 2,
16, 20, 25
0.6, 1.6, 2.6, 3.6 to 9.6 by 2,

13.6, 17.6, 22.6
ICRFS03
M3X0.5
3.0000
6.3000
5.5000
4, 5, 6 to 12 by 2,
16, 20, 25, 30
1.35, 2.35, 3.35 to 9.35 by 2,

13.35, 17.35, 22.35, 27.35
ICRFS04
M4X0.7
4.0000
9.4000
8.4000
5, 6 to 12 by 2, 16,
20 to 40 by 5
0.9, 1.9, 3.9 to 7.9 by 2,

10.9, 15.9 to 35.9 by 5
ICRFS05
M5X0.8
5.0000
10.4000
9.3000
6 to 12 by 5, 16,
20 to 50 by 5
1.7 to 7.7 by 2, 11.7,

15.7 to 40.7 by 5, 38
ICRFS06
M6X1
6.0000
12.6000
11.3000
8, 10, 12, 16,

20 to 50 by 5, 60
2.7, 4.7, 6.7, 10.7,

14.7 to 39.7, 38
ICRFS07
M8X1.25
8.0000
17.3000
15.8000
10, 12, 16,

20 to 50 by 5, 60
2.85, 4.85, 8.85,

12.85 to 37.85 by 5, 38
ICRFS08
M10X1.5
10.0000
20.0000
18.3000
12, 16, 20 to 50 by 5, 60
4, 8, 12 to 37 by 5, 38
36 - 7
ISO Cross Recessed

Head Screws
36 - 8
Cross Recessed Raised Countersunk Head Screws, Grade A
Notes:
Name
Nom
Dia Thr
Pitch
Thd
Dia
Head
Dia
Act
Raised
Head
Height
Head
Dia
Theor
Length
Thread
Length
ICRRS01
M1.6X.35
1.6000
3.0000
0.40000
3.6000
3, 4, 5, 6 to 12 by 2, 16
1.3, 2.3, 3.3,

4.3 to 10.3 by 2, 14.3
ICRRS02
M2X0.4
2.0000
3.8000
0.50000
4.4000
3, 4, 5, 6 to 12 by 2,
16, 20
1, 2, 3, 4 to 10 by 2, 14,
18
Name
Nom
Dia Thr
Pitch
Thd
Dia
Head
Dia
Act
Raised
Head
Height
Head
Dia
Theor
Length
Thread
Length
ICRRS03
M2.5X0.45
2.5000
4.7000
0.60000
5.5000
3, 4, 5, 6 to 12 by 2,
16, 20, 25
0.6, 1.6, 2.6,

3.6 to 9.6 by 2,
13.6, 17.6, 22.6
ICRRS04
M3X0.5
3.0000
5.5000
0.70000
6.3000
4, 5, 6 to 12 by 2,
16, 20, 25, 30
1.35, 2.35,
3.35 to 9.35 by 2,
13.35, 17.35, 22.35, 27.35
ICRRS05
M4X0.7
4.0000
8.4000
1.00000
9.4000
5, 6 to 12 by 2, 16,
20 to 40 by 5
0.9. 1.9, 3.9 to 7.9 by 2,

11.9, 15.9 to 35.9 by 5
ICRRS06
M5X0.8
5.0000
9.3000
1.20000
10.4000
6 to 12 by 2, 16,
20 to 50 by 5
1.7 to 7.7 by 2, 11.7,

15.7 to 40.7 by 5, 38
ICRRS07
M6X1
6.0000
11.3000
1.40000
12.6000
8, 10, 12, 16,

20 to 50 by 5, 60
2.7, 4.7, 6.7, 10.7,

14.7 to 39.7 by 5, 38
ICRRS08
M8X1.25
8.0000
15.8000
2.00000
17.3000
10, 12, 16,

20 to 50 by 5, 60
2.85. 4.85, 8.85,

12.85 to 37.85 by 5, 38
ICRRS09
M10X1.5
10.0000
18.3000
2.30000
20.0000
12, 16,
20 to 50 by 5, 60
4, 8, 12 to 37 by 5, 38
36 - 9
ISO Cross Recessed

Head Screws
37
ISO Set Screws
37 - 1
Hex Socket Set Screws With Flat Point
Generic Part Name: ISEHF

Notes:
37 - 2

Name
Nom
Dia Thr
Pitch
Thread
Dia
Point
Dia
Sock Flat
Width
Length
ISEHF01
M1.6X0.35
1.6000
0.8000
0.7240
2, 2.5, 3, 4,
5, 6, 8
ISEHF02
M2X0.4
2.0000
1.0000
0.9020
2, 2.5, 3, 4,
5, 6, 8, 10
ISEHF03
M2.5X0.45
2.5000
1.5000
1.2950
2, 2.5, 3, 4,
5, 6 to 12 by
2
ISEHF04
M3X0.5
3.0000
2.0000
1.5450
2, 2.5, 3, 4,
5, 6 to 12 by
2, 16
ISEHF05
M4X0.7
4.0000
2.5000
2.0450
2.5, 3, 4, 5, 6
to 12 by 2,
16, 20
Nom
Dia Thr
Pitch
Thread
Dia
Point
Dia
Sock Flat
Width
Length
ISEHF06
M5X0.8
5.0000
3.5000
2.5600
3, 4, 5, 6 to
12 by 2, 16,
20, 25
ISEHF07
M6X1
6.0000
4.0000
3.0800
4, 5, 6 to 12
by 2, 16, 20,
25, 30
ISEHF08
M8X1.25
8.0000
5.5000
4.0950
5, 6 to 12 by
2, 16, 20 to
40 by 5
ISEHF09
M10X1.5
10.0000
7.0000
5.0950
6 to 12 by 2,
16, 20 to 50
by 5
ISEHF10
M12X1.75
12.0000
8.5000
6.0950
8, 10, 12,
16, 20 to 60
by 5
ISEHF11
M16X2
16.0000
12.0000
8.1150
10, 12, 16,

20 to 60 by 5
ISEHF12
M20X2.5
20.0000
15.0000
10.1150
12, 16, 20 to
60 by 5
ISEHF13
M24X3
24.0000
18.0000
12.1420
16, 20 to 60
by 5
ISO Set Screws
Name
Hex Socket Set Screws With Cone Point
Generic Part Name: ISEHC

Notes:
ISO Set Screws

37 - 3

Name
Nom
Dia Thr
Pitch
Thread
Dia
Sock Flat
Width
Length
ISEHC01
M1.6X0.35
1.6000
0.7240
2, 2.5, 3, 4, 5, 6, 8
ISEHC02
M2X0.4
2.0000
0.9020
2, 2.5, 3, 4, 5, 6, 8, 10
ISEHC03
M2.5X0.45
2.5000
1.2950
2.5, 3, 4, 5, 6 to 12 by 2
ISEHC04
M3X0.5
3.0000
1.5450
2.5, 3, 4, 5, 6 to 12 by 2, 16
ISEHC05
M4X0.7
4.0000
2.0450
3, 4, 5, 6 to 12 by 2, 16, 20
ISEHC06
M5X0.8
5.0000
2.5600
4, 5, 6 to 12 by 2, 16, 20, 25
ISEHC07
M6X1
6.0000
3.0800
5, 6 to 12 by 2, 16, 20, 25, 30
ISEHC08
M8X1.25
8.0000
4.0950
6 to 12 by 2, 16, 20 to 40 by 5
ISEHC09
M10X1.5
10.0000
5.0950
8, 10, 12, 16, 20 to 50 by 5
ISEHC10
M12X1.75
12.0000
6.0950
10, 12, 16, 20 to 60 by 5
ISEHC11
M16X2
16.0000
8.1150
12, 16, 20 to 60 by 5
ISEHC12
M20X2.5
20.0000
10.1150
16, 20 to 60 by 5
ISEHC13
M24X3
24.0000
12.1420
20 to 60 by 5
Hex Socket Set Screws With Dog Point
37 - 4
Generic Part Name: ISEHD

Notes:

Nom
Dia Thr
Pitch
Thread
Dia
Point
Dia
Sock
Flat
Width
Length
Point
Length
ISEHD01
M1.6X0.35
1.6000
0.8000
0.7240
2, 2.5, 3, 4,
5, 6, 8
0.65, 1.05
ISEHD02
M2X0.4
2.0000
1.0000
0.9020
2.5, 3, 4, 5,
6, 8, 10
0.75, 1.25
ISEHD03
M2.5X0.45
2.5000
1.5000
1.2950
3, 4, 5, 6 to
12 by 2
0.88, 1.5
ISEHD04
M3X0.5
3.0000
2.0000
1.5450
4, 5, 6 to 12
by 2, 16
1, 1.75
ISEHD05
M4X0.7
4.0000
2.5000
2.0450
5, 6 to 12 by
2, 16, 20
1.25, 2.25
ISEHD06
M5X0.8
5.0000
3.5000
2.5600
6 to 12 by 2,
16, 20, 25
1.5, 2.75
ISEHD07
M6X1
6.0000
4.0000
3.0800
8, 10, 12,
16, 20, 25,
30
1.75, 3.25
ISEHD08
M8X1.25
8.0000
5.5000
4.0950
8, 10, 12,
16, 20 to 40
by 5
2.25, 4.3
ISEHD09
M10X1.5
10.0000
7.0000
5.0950
10, 12, 16,

20 to 50 by
5
2.75, 5.3
ISEHD10
M12X1.75
12.0000
8.5000
6.0950
12, 16, 20 to
60 by 5
3.25, 6.3
ISEHD11
M16X2
16.0000
12.0000
8.1150
16, 20 to 60
by 5
4.3, 8.36
ISEHD12
M20X2.5
20.0000
15.0000
10.1150
20 to 60 by
5
5.3, 10.36
ISEHD13
M24X3
24.0000
18.0000
12.1420
25 to 60 by
5
6.3, 12.43
ISO Set Screws
37 - 5
ISO Set Screws
Name
Hex Socket Set Screws With Cup Point
Generic Part Name: ISEHP

Notes:

Name
Nom
Dia Thr
Pitch
Thread
Dia
Point
Dia
Sock Flat
Width
Length
ISEHP01
M1.6X0.35
1.6000
0.8000
0.7240
2, 2.5, 3, 4, 5, 6, 8
ISEHP02
M2X0.4
2.0000
1.0000
0.9020
2, 2.5, 3, 4, 5, 6, 8,
10
ISEHP03
M2.5X0.45
2.5000
1.2000
1.2950
2, 2.5, 3, 4, 5, 6 to
12 by 2
ISEHP04
M3X0.5
3.0000
1.4000
1.5450
2.5, 3, 4, 5, 6 to 12
by 2, 16
ISEHP05
M4X0.7
4.0000
2.0000
2.0450
3, 4, 5, 6 to 12 by 2,
16, 20
ISEHP06
M5X0.8
5.0000
2.5000
2.5600
4, 5, 6 to 12 by 2, 16,
20, 25
ISEHP07
M6X1
6.0000
3.0000
3.0800
5, 6 to 12 by 2, 16,
20, 25, 30
37 - 6
Nom
Dia Thr
Pitch
Thread
Dia
Point
Dia
Sock Flat
Width
Length
ISEHP08
M8X1.25
8.0000
5.0000
4.0950
6 to 12 by 2, 16, 20
to 40 by 5
ISEHP09
M10X1.5
10.0000
6.0000
5.0950
8, 10, 12, 16, 20 to

50 by 5
ISEHP10
M12X1.75
12.0000
8.0000
6.0950
10, 12, 16, 20 to 60

by 5
ISEHP11
M16X2
16.0000
10.0000
8.1150
12, 16, 20 to 60 by 5
ISEHP12
M20X2.5
20.0000
14.0000
10.1150
16, 20 to 60 by 5
ISEHP13
M24X3
24.0000
16.0000
12.1420
20 to 60 by 5
ISO Set Screws
Name
Slotted Set Screws With Flat Point
Generic Part Name: ISESF

Notes:

Name
Nominal
Dia Thr
Pitch
Thread
Dia
Length
ISESF01
M1.2X0.25
1.2000
2, 2.5, 3, 4, 5, 6
ISESF02
M1.6X0.35
1.6000
2, 2.5, 3, 4, 5, 6, 8
ISO Set Screws
37 - 7
Name
Nominal
Dia Thr
Pitch
Thread
Dia
Length
ISESF03
M2X0.4
2.0000
2, 2.5, 3, 4, 5, 6, 8, 10
ISESF04
M2.5X0.45
2.5000
2.5, 3, 4, 5, 6 to 12 by 2
ISESF05
M3X0.5
3.0000
3, 4, 5, 6 to 12 by 2, 16
ISESF06
M4X0.7
4.0000
4, 5, 6 to 12 by 2, 16, 20
ISESF07
M5X0.8
5.0000
5, 6 to 12 by 2, 16, 20, 25
ISESF08
M6X1
6.0000
6 to 12 by 2, 16, 20, 25, 30
ISESF09
M8X1.25
8.0000
8, 10, 12, 16, 20 to 40 by 5
ISESF10
M10X1.5
10.0000
10, 12, 16, 20 to 50 by 5
ISESF11
M12X1.75
12.0000
12, 16, 20 to 60 by 5
Slotted Set Screws With Cone Point
Generic Part Name: ISESC

Notes:
37 - 8

Nom
Dia Thr
Pitch
Thread
Dia
Point
Dia
Length
ISESC01
M1.2X0.25
1.2000
0.12000
2, 2.5, 3, 4, 5, 6
ISESC02
M1.6X0.35
1.6000
0.16000
2, 2.5, 3, 4, 5, 6, 8
ISESC03
M2X0.4
2.0000
0.20000
3, 4, 5, 6, 8, 10
ISESC04
M2.5X0.45
2.5000
0.25000
3, 4, 5, 6 to 12 by 2
ISESC05
M3X0.5
3.0000
0.30000
4, 5, 6 to 12 by 2, 16
ISESC06
M4X0.7
4.0000
0.40000
4, 5, 6 to 12 by 2, 16, 20
ISESC07
M5X0.8
5.0000
0.50000
5, 6 to 12 by 2, 16, 20, 25
ISESC08
M6X1
6.0000
1.50000
6 to 12 by 2, 16, 20, 25, 30
ISESC09
M8X1.25
8.0000
2.00000
8, 10, 12, 16, 20 to 40 by 5
ISESC10
M10X1.5
10.0000
2.50000
10, 12, 16, 20 to 50 by 5
ISESC11
M12X1.75
12.0000
3.00000
12, 16, 20 to 60 by 5
ISO Set Screws
Name
Slotted Set Screws with Long Dog Point
Generic Part Name: ISESD

Notes:
ISO Set Screws

37 - 9
Name
Nominal
Dia Thr
Pitch
Thread
Dia
Point
Dia
Point
Length
Length
ISESD01
M1.6X0.35
1.6000
0.80000
1.05000
2.5, 3, 4, 5, 6, 8
ISESD02
M2X0.4
2.0000
1.00000
1.25000
3, 4, 5, 6, 8, 10
ISESD03
M2.5X0.45
2.5000
1.50000
1.50000
4, 5, 6, 8, 10, 12
ISESD04
M3X0.5
3.0000
2.00000
1.75000
5, 6 to 12 by 2, 16
ISESD05
M4X0.7
4.0000
2.50000
2.25000
6 to 12 by 2, 16, 20
ISESD06
M5X0.8
5.0000
3.50000
2.75000
8, 10, 12, 16, 20, 25
ISESD07
M6X1
6.0000
4.00000
3.25000
8, 10, 12, 16, 20, 25,

30
ISESD08
M8X1.25
8.0000
5.50000
4.30000
10, 12, 16, 20 to 40

by 5
ISESD09
M10X1.5
10.0000
7.00000
5.30000
12, 16, 20 to 50 by 5
ISESD10
M12X1.75
12.0000
8.50000
6.30000
16, 20 to 60 by 5
Slotted Set Screws With Cup Point
Generic Part Name: ISESP

Notes:
37 - 10

Nom
Dia Thr
Pitch
Thread
Dia
Point
Dia
Length
ISESP01
M1.6X0.35
1.6000
0.80000
2, 2.5, 3, 4, 5, 6, 8
ISESP02
M2X0.4
2.0000
1.00000
2.5, 3, 4, 5, 6, 8, 10
ISESP03
M2.5X0.45
2.5000
1.20000
3, 4, 5, 6 to 12 by 2
ISESP04
M3X0.5
3.0000
1.40000
3, 4, 5, 6 to 12 by 2, 16
ISESP05
M4X0.7
4.0000
2.00000
4, 5, 6 to 12 by 2, 16, 20
ISESP06
M5X0.8
5.0000
2.50000
5, 6 to 12 by 2, 16, 20, 25
ISESP07
M6X1
6.0000
3.00000
6 to 12 by 2, 16, 20, 25, 30
ISESP08
M8X1.25
8.0000
5.00000
8, 10, 12, 16, 20 to 40 by 5
ISESP09
M10X1.5
10.0000
6.00000
10, 12, 16, 20 to 50 by 5
ISESP10
M12X1.75
12.0000
8.00000
12, 16, 20 to 60 by 5
ISO Set Screws
ISO Set Screws
Name
37 - 11
37 - 12
38
ISO Tapping Screws
38 - 1
Hex Head Tapping Screws
Generic Part Name: ITHHS

Notes:

Name
Nominal
Dia Thr
Pitch
Type
Thread
Maj
Dia
Head
Height
Flat
Width
Length
ITHHS01
ST2.2X0.8
2.24000
1.60000
3.2000
4.5, 6.5,
9.5, 13, 16
ITHHS02
ST2.9X1.1
2.90000
2.30000
5.0000
6.5, 9.5, 13,

16, 19
ITHHS03
ST3.5X1.3
3.53000
2.60000
5.5000
6.5, 9.5, 13,

16, 19, 22
ITHHS04
ST4.2X1.4
4.22000
3.00000
7.0000
9.5, 13, 16,

19, 22, 25
ITHHS05
ST4.8X1.6
4.80000
3.80000
8.0000
9.5, 13, 16,

19, 22, 25,
32
ITHHS06
ST5.5X1.8
5.46000
4.10000
8.0000
13, 16, 19,

22, 25, 32
38 - 2
Nominal
Dia Thr
Pitch
Type
Thread
Maj
Dia
Head
Height
Flat
Width
Length
ITHHS07
ST6.3X1.8
6.25000
4.70000
10.0000
13, 16, 19,

22, 25, 32,
38
ITHHS08
ST8X2.1
8.00000
6.00000
13.0000
13, 16, 19,

22, 25, 32,
38, 45, 50
ITHHS09
ST9.5X2.1
9.65000
7.50000
16.0000
16, 19, 22,

25, 32, 38,
45, 50
ITHHS10
ST2.2X0.8
2.24000
1.60000
3.2000
4.5, 6.5,
9.5, 13, 16
ITHHS11
ST2.9X1.1
2.90000
2.30000
5.0000
6.5, 9.5, 13,

16, 19
ITHHS12
ST3.5X1.3
3.53000
2.60000
5.5000
6.5, 9.5, 13,

16, 19, 22
ITHHS13
ST4.2X1.4
4.22000
3.00000
7.0000
9.5, 13, 16,

19, 22, 25
ITHHS14
ST4.8X1.6
4.80000
3.80000
8.0000
9.5, 13, 16,

19, 22, 25,
32
ITHHS15
ST5.5X1.8
5.46000
4.10000
8.0000
13, 16, 19,

22, 25, 32
ITHHS16
ST6.3X1.8
6.25000
4.70000
10.0000
13, 16, 19,

22, 25, 32,
38
ITHHS17
ST8X2.1
8.00000
6.00000
13.0000
13, 16, 19,

22, 25, 32,
38, 45, 50
ITHHS18
ST9.5X2.1
9.65000
7.50000
16.0000
16, 19, 22,

25, 32, 38,
45, 50
Slotted Pan Head Tapping Screws
ISO Tapping Screws
38 - 3
ISO Tapping Screws
Name
Generic Part Name: ITSPS

Notes:

Name
Nom
Dia Thr
Pitch
Type
Thread
Maj
Dia
Head
Dia
Head
Height
Length
ITSPS01
ST2.2X0.8
2.24000
4.0000
1.60000
4.5, 6.5, 9.5, 13, 16
ITSPS02
ST2.9X1.1
2.90000
5.6000
2.30000
6.5, 9.5, 13, 16, 19
ITSPS03
ST3.5X1.3
3.53000
7.0000
2.60000
6.5, 9.5, 13, 16, 19,

22
ITSPS04
ST4.2X1.4
4.22000
8.0000
3.00000
9.5, 13, 16, 19, 22,

25
ITSPS05
ST4.8X1.6
4.80000
9.5000
3.80000
9.5, 13, 16, 19, 22,

25, 32
ITSPS06
ST5.5X1.8
5.46000
11.0000
4.10000
13, 16, 19, 22, 25,

32
ITSPS07
ST6.3X1.8
6.25000
12.0000
4.70000
13, 16, 19, 22, 25,

32, 38
ITSPS08
ST8X2.1
8.00000
16.0000
6.00000
16, 19, 22, 25, 32,

38, 45, 50
ITSPS09
ST9.5X2.1
9.65000
20.0000
7.50000
16, 19, 22, 25, 32,

38, 45, 50
38 - 4
Nom
Dia Thr
Pitch
Type
Thread
Maj
Dia
Head
Dia
Head
Height
Length
ITSPS10
ST2.2X0.8
2.24000
4.0000
1.60000
4.5, 6.5, 9.5, 13, 16
ITSPS11
ST2.9X1.1
2.90000
5.6000
2.30000
6.5, 9.5, 13, 16, 19
ITSPS12
ST3.5X1.3
3.53000
7.0000
2.60000
6.5, 9.5, 13, 16, 19,

22
ITSPS13
ST4.2X1.4
4.22000
8.0000
3.00000
9.5, 13, 16, 19, 22,

25
ITSPS14
ST4.8X1.6
4.80000
9.5000
3.80000
9.5, 13, 16, 19, 22,

25, 32
ITSPS15
ST5.5X1.8
5.46000
11.0000
4.10000
13, 16, 19, 22, 25,

32
ITSPS16
ST6.3X1.8
6.25000
12.0000
4.70000
13, 16, 19, 22, 25,

32, 38
ITSPS17
ST8X2.1
8.00000
16.0000
6.00000
16, 19, 22, 25, 32,

38, 45, 50
ITSPS18
ST9.5X2.1
9.65000
20.0000
7.50000
16, 19, 22, 25, 32,

38, 45, 50
Slotted Countersunk Head Tapping Screws
Generic Part Name: ITSCS

Notes:
ISO Tapping Screws
38 - 5
ISO Tapping Screws
Name

Name
Nom
Dia Thr
Pitch
Type
Thread
Maj
Dia
Head
Dia
Theor
Head
Dia
Length
ITSCS01
ST2.2X0.8
2.24000
4.4000
3.8000
4.5, 6.5, 9.5, 13, 16
ITSCS02
ST2.9X1.1
2.90000
6.3000
5.5000
6.5, 9.5, 13, 16, 19
ITSCS03
ST3.5X1.3
3.53000
8.2000
7.3000
9.5, 13, 16, 19, 22,

25
ITSCS04
ST4.2X1.4
4.22000
9.4000
8.4000
9.5, 13, 16, 19, 22,

25, 32
ITSCS05
ST4.8X1.6
4.80000
10.4000
9.3000
9.5, 13, 16, 19, 22,

25, 32
ITSCS06
ST5.5X1.8
5.46000
11.5000
10.3000
13, 16, 19, 22, 25,

32, 38
ITSCS07
ST6.3X1.8
6.25000
12.6000
11.3000
13, 16, 19, 22, 25,

32, 38
ITSCS08
ST8X2.1
8.00000
17.3000
15.8000
16, 19, 22, 25, 32,

38, 45, 50
ITSCS09
ST9.5X2.1
9.65000
20.0000
18.3000
19, 22, 25, 32, 38,

45, 50
ITSCS10
ST2.2X0.8
2.24000
4.4000
3.8000
4.5, 6.5, 9.5, 13, 16
ITSCS11
ST2.9X1.1
2.90000
6.3000
5.5000
6.5, 9.5, 13, 16, 19
ITSCS12
ST3.5X1.3
3.53000
8.2000
7.3000
9.5, 13, 16, 19, 22,

25
ITSCS13
ST4.2X1.4
4.22000
9.4000
8.4000
9.5, 13, 16, 19, 22,

25, 32
ITSCS14
ST4.8X1.6
4.80000
10.4000
9.3000
9.5, 13, 16, 19, 22,

25, 32
ITSCS15
ST5.5X1.8
5.46000
11.5000
10.3000
13, 16, 19, 22, 25,

32, 38
ITSCS16
ST6.3X1.8
6.25000
12.6000
11.3000
13, 16, 19, 22, 25,

32, 38
ITSCS17
ST8X2.1
8.00000
17.3000
15.8000
16, 19, 22, 25, 32,

38, 45, 50
38 - 6
Name
Nom
Dia Thr
Pitch
Type
Thread
Maj
Dia
Head
Dia
Theor
Head
Dia
Length
ITSCS18
ST9.5X2.1
9.65000
20.0000
18.3000
19, 22, 25, 32, 38,

45, 50
Slotted Raised Countersunk Head Tapping

Screws
ISO Tapping Screws
Generic Part Name: ITSRC

Notes:

Name
Nom
Dia Thr
Pitch
Type
Thread
Maj
Dia
Head
Dia
Theor
Head
Dia
Head
Raise
Length
ITSRC01
ST2.2X0.8
2.24000
4.4000
3.8000
0.50000
4.5, 6.5,
9.5, 13, 16
ITSRC02
ST2.9X1.1
2.90000
6.3000
5.5000
0.70000
6.5, 9.5,
13, 16, 19
ITSRC03
ST3.5X1.3
3.53000
8.2000
7.3000
0.80000
9.5, 13,
16, 19, 22
ISO Tapping Screws
38 - 7
Name
Nom
Dia Thr
Pitch
Type
Thread
Maj
Dia
Head
Dia
Theor
Head
Dia
Head
Raise
Length
ITSRC04
ST4.2X1.4
4.22000
9.4000
8.4000
1.00000
9.5, 13, 16,

19, 22, 25
ITSRC05
ST4.8X1.6
4.80000
10.4000
9.3000
1.20000
9.5, 13,
16, 19, 22,
25, 32
ITSRC06
ST5.5X1.8
5.46000
11.5000
10.3000
1.30000
13, 16, 19,

22, 25, 32
ITSRC07
ST6.3X1.8
6.25000
12.6000
11.3000
1.40000
13, 16, 19,

22, 25, 32,
38
ITSRC08
ST8X2.1
8.00000
17.3000
15.8000
2.00000
16, 19, 22,

25, 32, 38,
45, 50
ITSRC09
ST9.5X2.1
9.65000
20.0000
18.3000
2.30000
19, 22, 25,

32, 38, 45,
50
ITSRC10
ST2.2X0.8
2.24000
4.4000
3.8000
0.50000
4.5, 6.5,
9.5, 13, 16
ITSRC11
ST2.9X1.1
2.90000
6.3000
5.5000
0.70000
6.5, 9.5,
13, 16, 19
ITSRC12
ST3.5X1.3
3.53000
8.2000
7.3000
0.80000
9.5, 13,
16, 19, 22
ITSRC13
ST4.2X1.4
4.22000
9.4000
8.4000
1.00000
9.5, 13.
16, 19, 22,
25
ITSRC14
ST4.8X1.6
4.80000
10.4000
9.3000
1.20000
9.5, 13,
16, 19, 22,
25, 32
ITSRC15
ST5.5X1.8
5.46000
11.5000
10.3000
1.30000
13, 16, 19,

22, 25, 32
ITSRC16
ST6.3X1.8
6.25000
12.6000
11.3000
1.40000
13, 16, 19,

22, 25, 32,
38
ITSRC17
ST8X2.1
8.00000
17.3000
15.8000
2.00000
16, 19, 22,

25, 32, 38,
45, 50
38 - 8
Name
Nom
Dia Thr
Pitch
Type
Thread
Maj
Dia
Head
Dia
Theor
Head
Dia
Head
Raise
Length
ITSRC18
ST9.5X2.1
9.65000
20.0000
18.3000
2.30000
19, 22, 25,

32, 38, 45,
50
Cross Recessed Pan Head Tapping Screws
ISO Tapping Screws
Generic Part Name: ITCPS

Notes:

Name
Nom
Dia Thr
Pitch
Type
Head
Dia
Head
Height
Thread
Maj
Dia
Length
ITCPS01
ST2.2X0.8
4.0000
1.60000
2.24000
4.5, 6.5, 9.5,

13, 16
ITCPS02
ST2.9X1.1
5.6000
2.40000
2.90000
6.5, 9.5, 13,

16, 19
ITCPS03
ST3.5X1.3
7.0000
2.60000
3.53000
9.5, 13, 16, 19,

22, 25
ISO Tapping Screws
38 - 9
Name
Nom
Dia Thr
Pitch
Type
Head
Dia
Head
Height
Thread
Maj
Dia
Length
ITCPS04
ST4.2X1.4
8.0000
3.10000
4.22000
9.5, 13, 16, 19,

22, 25, 32
ITCPS05
ST4.8X1.6
9.5000
3.70000
4.80000
9.5, 13, 16, 19,

22, 25, 32, 38
ITCPS06
ST5.5X1.8
11.0000
4.00000
5.46000
13, 16, 19, 22,

25, 32, 38
ITCPS07
ST6.3X1.8
12.0000
4.60000
6.25000
13, 16, 19, 22,

25, 32, 38
ITCPS08
ST8X2.1
16.0000
6.00000
8.00000
16, 19, 22, 25,

32, 38, 45, 50
ITCPS09
ST9.5X2.1
20.0000
7.50000
9.65000
19, 22, 25, 32,

38, 45, 50
ITCPS10
ST2.2X0.8
4.0000
1.60000
2.24000
4.5, 6.5, 9.5,

13, 16
ITCPS11
ST2.9X1.1
5.6000
2.40000
2.90000
6.5, 9.5, 13,

16, 19
ITCPS12
ST3.5X1.3
7.0000
2.60000
3.53000
9.5, 13, 16, 19,

22, 25
ITCPS13
ST4.2X1.4
8.0000
3.10000
4.22000
9.5, 13, 16, 19,

22, 25, 32
ITCPS14
ST4.8X1.6
9.5000
3.70000
4.80000
9.5, 13, 16, 19,

22, 25, 32, 38
ITCPS15
ST5.5X1.8
11.0000
4.00000
5.46000
13, 16, 19, 22,

25, 32, 38
ITCPS16
ST6.3X1.8
12.0000
4.60000
6.25000
13, 16, 19, 22,

25, 32, 38
ITCPS17
ST8X2.1
16.0000
6.00000
8.00000
16, 19, 22, 25,

32, 38, 45, 50
ITCPS18
ST9.5X2.1
20.0000
7.50000
9.65000
16, 19, 22, 25,

32, 38, 45, 50
Cross Recessed Countersunk Head Tapping

Screws
38 - 10
Generic Part Name: ITCCS

Notes:

Name
Nom
Dia Thr
Pitch
Type
Head
Dia
Theor
Thread
Maj
Dia
Head
Dia
Act
Length
ITCCS01
ST2.2X0.8
4.4000
2.24000
3.8000
4.5, 6.5, 9.5,

13, 16
ITCCS02
ST2.9X1
6.3000
2.90000
5.5000
6.5, 9.5, 13,

16, 19
ITCCS03
ST3.5X1.3
8.2000
3.53000
7.3000
9.5, 13, 16, 19,

22, 25
ITCCS04
ST4.2X1.4
9.4000
4.22000
8.4000
9.5, 13, 16, 19,

22, 25, 32
ITCCS05
ST4.8X1.6
10.4000
4.80000
9.3000
9.5, 13, 16, 19,

22, 25, 32
ITCCS06
ST5.5X1.8
11.5000
5.46000
10.3000
13, 16, 19, 22,

25, 32, 38
ITCCS07
ST6.3X1.8
12.6000
6.25000
11.3000
13, 16, 19, 22,

25, 32, 38
ITCCS08
ST8X2.1
17.3000
8.00000
15.8000
16, 19, 22, 25,

32, 38, 45, 50
ISO Tapping Screws
38 - 11
ISO Tapping Screws
Name
Nom
Dia Thr
Pitch
Type
Head
Dia
Theor
Thread
Maj
Dia
Head
Dia
Act
Length
ITCCS09
ST9.5X2.1
20.0000
9.65000
18.3000
16, 19, 22, 25,

32, 38, 45, 50
ITCCS10
ST2.2X0.8
4.4000
2.24000
3.8000
4.5, 6.5, 9.5,

13, 16
ITCCS11
ST2.9X1
6.3000
2.90000
5.5000
6.5, 9.5, 13,

16, 19
ITCCS12
ST3.5X1.3
8.2000
3.53000
7.3000
9.5, 13, 16, 19,

22, 25
ITCCS13
ST4.2X1.4
9.4000
4.22000
8.4000
9.5, 13, 16, 19,

22, 25, 32
ITCCS14
ST4.8X1.6
10.4000
4.80000
9.3000
9.5, 13, 16, 19,

22, 25, 32
ITCCS15
ST5.5X1.8
11.5000
5.46000
10.3000
13, 16, 19, 22,

25, 32, 38
ITCCS16
ST6.3X1.8
12.6000
6.25000
11.3000
13, 16, 19, 22,

25, 32, 38
ITCCS17
ST8X2.1
17.3000
8.00000
15.8000
16, 19, 22, 25,

32, 38, 45, 50
ITCCS18
ST9.5X2.1
20.0000
9.65000
18.3000
16, 19, 22, 25,

32, 38, 45, 50
Cross Recessed Raised Countersunk Head

Tapping Screws
38 - 12
Notes:
38 - 13
Name
Nom
Dia Thr
Pitch
Type
Head
Dia
Act
Raised
Head
Height
Thread
Maj Dia
Head
Dia
Theor
Length
ITCRS01
ST2.2X0.8
3.8000
0.50000
2.24000
4.4000
4.5, 6.5, 9.5, 13, 16
ITCRS02
ST2.9X1.1
5.5000
0.70000
2.90000
6.3000
6.5, 9.5, 13, 16, 19
ITCRS03
ST3.5X1.3
7.3000
0.80000
3.53000
8.2000
9.5, 13, 16, 19, 22, 25
ITCRS04
ST4.2X1.4
8.4000
1.00000
4.22000
9.4000
9.5, 13, 16, 19, 22, 25, 32
ITCRS05
ST4.8X1.6
9.3000
1.20000
4.80000
10.4000
9.5, 13, 16, 19, 22, 25, 32
ITCRS06
ST5.5X1.8
10.3000
1.30000
5.46000
11.5000
13, 16, 19, 22, 25, 32, 38
ITCRS07
ST6.3X1.8
11.3000
1.40000
6.25000
12.6000
13, 16, 19, 22, 25, 32, 38
ITCRS08
ST8X2.1
15.8000
2.00000
8.00000
17.3000
16, 19, 22, 25, 32, 38, 45, 50
ITCRS09
ST9.5X2.1
18.3000
2.30000
9.65000
20.0000
16, 19, 22, 25, 32, 38, 45, 50
ITCRS10
ST2.2X0.8
3.8000
0.50000
2.24000
4.4000
4.5, 6.5, 9.5, 13, 16
ITCRS11
ST2.9X1.1
5.5000
0.70000
2.90000
6.3000
6.5, 9.5, 13, 16, 19
ITCRS12
ST3.5X1.3
7.3000
0.80000
3.53000
8.2000
9.5, 13, 16, 19, 22, 25
ITCRS13
ST4.2X1.4
8.4000
1.00000
4.22000
9.4000
9.5, 13, 16, 19. 22, 25, 32,
ITCRS14
ST4.8X1.6
9.3000
1.20000
4.80000
10.4000
9.5, 13, 16, 19, 22, 25, 32
ITCRS15
ST5.5X1.8
10.3000
1.30000
5.46000
11.5000
13, 16, 19, 22, 25, 32, 38
ISO Tapping Screws
ISO Tapping Screws
Generic Part Name: ITCRS
38 - 14
Name
Nom
Dia Thr
Pitch
Type
Head
Dia
Act
Raised
Head
Height
Thread
Maj Dia
Head
Dia
Theor
Length
ITCRS16
ST6.3X1.8
11.3000
1.40000
6.25000
12.6000
13, 16, 19, 22, 25, 32, 38
ITCRS17
ST8X2.1
15.8000
2.00000
8.00000
17.3000
16, 19, 22, 25, 32, 38, 45, 50
ITCRS18
ST9.5X2.1
18.3000
2.30000
9.65000
20.0000
16, 19, 22, 25, 32, 38, 45, 50
39
ISO Hex Nuts
39 - 1
Hex Nuts, Style 1, Grade A & B
Generic Part Name: INHS1

Note: Corresponds to standard ISO 4032 - 1986.
39 - 2
Name
Nominal
Dia Thr
Pitch
Thread
Dia
Flat
Width
Nut
Thick
INHS101
M1.6X0.35
1.6000
3.2000
1.3000
INHS102
M2X0.4
2.0000
4.0000
1.6000
INHS103
M2.5X0.45
2.5000
5.0000
2.0000
INHS104
M3X0.5
3.0000
5.5000
2.4000
INHS105
M4X0.7
4.0000
7.0000
3.2000
INHS106
M5X0.8
5.0000
8.0000
4.7000
INHS107
M6X1
6.0000
10.0000
5.2000
INHS108
M8X1.25
8.0000
13.0000
6.8000
INHS109
M10X1.5
10.0000
16.0000
8.4000
INHS110
M12X1.75
12.0000
18.0000
10.8000
INHS111
M16X2
16.0000
24.0000
14.8000
INHS112
M20X2.5
20.0000
30.0000
18.0000
INHS113
M24X3
24.0000
36.0000
21.5000
INHS114
M30X3.5
30.0000
46.0000
25.6000
INHS115
M36X4
36.0000
55.0000
31.0000
Name
Nominal
Dia Thr
Pitch
Thread
Dia
Flat
Width
Nut
Thick
INHS116
M42X4.5
42.0000
65.0000
34.0000
INHS117
M48X5
48.0000
75.0000
38.0000
INHS118
M56X5.5
56.0000
85.0000
45.0000
INHS119
M64X6
64.0000
95.0000
51.0000
Hex Nuts, Style 2, Grade A & B
ISO Hex Nuts
Generic Part Name: INHS2

Note: Corresponds to standard ISO 4033- 1979.
Name
Nom
Dia Thr
Pitch
Thread
Dia
Flat
Width
Nut
Thick
INHS201
M5X0.8
5.0000
8.0000
5.1000
INHS202
M6X1
6.0000
10.0000
5.7000
INHS203
M8X1.25
8.0000
13.0000
7.5000
INHS204
M10X1.5
10.0000
16.0000
9.3000
INHS205
M12X1.75
12.0000
18.0000
12.0000
INHS206
M16X2
16.0000
24.0000
16.4000
INHS207
M20X2.5
20.0000
30.0000
20.3000
INHS208
M24X3
24.0000
36.0000
23.9000
ISO Hex Nuts
39 - 3
Name
Nom
Dia Thr
Pitch
Thread
Dia
Flat
Width
Nut
Thick
INHS209
M30X3.5
30.0000
46.0000
28.6000
INHS210
M36X4
36.0000
55.0000
34.7000
Hex Nuts, Grade C
Generic Part Name: INHGC

39 - 4
Name
Nom
Dia Thr
Pitch
Thread
Dia
Flat
Width
Nut
Thick
INHGC01
M5X0.8
5.0000
8.0000
5.6000
INHGC02
M6X1
6.0000
10.0000
6.1000
INHGC03
M8X1.25
8.0000
13.0000
7.9000
INHGC04
M10X1.5
10.0000
16.0000
9.5000
INHGC05
M12X1.75
12.0000
18.0000
12.2000
INHGC06
M16X2
16.0000
24.0000
15.9000
INHGC07
M20X2.5
20.0000
30.0000
19.0000
INHGC08
M24X3
24.0000
36.0000
22.3000
INHGC09
M30X3.5
30.0000
46.0000
26.4000
INHGC10
M36X4
36.0000
55.0000
31.5000
Name
Nom
Dia Thr
Pitch
Thread
Dia
Flat
Width
Nut
Thick
INHGC11
M42X4.5
42.0000
65.0000
34.9000
INHGC12
M48X5
48.0000
75.0000
38.9000
INHGC13
M56X5.5
56.0000
85.0000
45.9000
INHGC14
M64X6
64.0000
95.0000
52.4000
Hex Thin Nuts (Chamfered), Grade A & B
ISO Hex Nuts
Generic Part Name: INHTC

Name
Nom
Dia Thr
Pitch
Thread
Dia
Flat
Width
Nut
Thick
INHTC01
M1.6X0.35
1.6000
3.2000
1.0000
INHTC02
M2X0.4
2.0000
4.0000
1.2000
INHTC03
M2.5X0.45
2.5000
5.0000
1.6000
INHTC04
M3X0.5
3.0000
5.5000
1.8000
INHTC05
M4X0.7
4.0000
7.0000
2.2000
INHTC06
M5X0.8
5.0000
8.0000
2.7000
INHTC07
M6X1
6.0000
10.0000
3.2000
INHTC08
M8X1.25
8.0000
13.0000
4.0000
ISO Hex Nuts
39 - 5
Name
Nom
Dia Thr
Pitch
Thread
Dia
Flat
Width
Nut
Thick
INHTC09
M10X1.5
10.0000
16.0000
5.0000
INHTC10
M12X1.75
12.0000
18.0000
6.0000
INHTC11
M16X2
16.0000
24.0000
8.0000
INHTC12
M20X2.5
20.0000
30.0000
10.0000
INHTC13
M24X3
24.0000
36.0000
12.0000
INHTC14
M30X3.5
30.0000
46.0000
15.0000
INHTC15
M36X4
36.0000
55.0000
18.0000
INHTC16
M42X4.5
42.0000
65.0000
21.0000
INHTC17
M48X5
48.0000
75.0000
24.0000
INHTC18
M56X5.5
56.0000
85.0000
28.0000
INHTC19
M64X6
64.0000
95.0000
32.0000
Hex Thin Nuts (Unchamfered), Grade B
Generic Part Name: INHTU

39 - 6
Name
Nom
Dia Thr
Pitch
Thread
Dia
Flat
Width
Nut
Thick
INHTU01
M1.6X0.35
1.6000
3.2000
1.00000
INHTU02
M2X0.4
2.0000
4.0000
1.20000
INHTU03
M2.5X0.45
2.5000
5.0000
1.60000
INHTU04
M3X0.5
3.0000
5.5000
1.80000
INHTU05
M4X0.7
4.0000
7.0000
2.20000
INHTU06
M5X0.8
5.0000
8.0000
2.70000
INHTU07
M6X1
6.0000
10.0000
3.20000
INHTU08
M8X1.25
8.0000
13.0000
4.00000
INHTU09
M10X1.5
10.0000
16.0000
5.00000
Hex Nuts with Flange, Grade A
ISO Hex Nuts
Generic Part Name: INHFA

ISO Hex Nuts
39 - 7
Name
Nom
Dia Thr
Pitch
Thread
Dia
Flat
Width
Nut
Thick
Flange
Dia
Flange
Edge
Thick
INHFA01
M5X0.8
5.0000
8.0000
5.0000
11.8000
1.00000
INHFA02
M6X1
6.0000
10.0000
6.0000
14.2000
1.10000
INHFA03
M8X1.25
8.0000
13.0000
8.0000
17.9000
1.20000
INHFA04
M10X1.5
10.0000
15.0000
10.0000
21.8000
1.50000
INHFA05
M12X1.75
12.0000
18.0000
12.0000
26.0000
1.80000
INHFA06
M14X2
14.0000
21.0000
14.0000
29.9000
2.10000
INHFA07
M16X2
16.0000
24.0000
16.0000
34.5000
2.40000
INHFA08
M20X2.5
20.0000
30.0000
20.0000
42.8000
3.00000
Hex Nuts for Fine Mechanics, Grade F
Generic Part Name: INHFM

39 - 8
Name
Nom
Dia Thr
Pitch
Thread
Dia
Flat
Width
Nut
Thick
INHFM01
M1X0.25
1.00000
2.50000
0.80000
Name
Nom
Dia Thr
Pitch
Thread
Dia
Flat
Width
Nut
Thick
INHFM02
M1.2X0.25
1.20000
3.00000
1.00000
INHFM03
M1.4X0.3
1.40000
3.00000
1.20000
Hex Structural Nuts, Large Flats, Grade B
ISO Hex Nuts
Generic Part Name: INSLW

Name
Nom
Dia Thr
Pitch
Thread
Dia
Flat
Width
Nut
Thick
INSLW01
M16X2
16.0000
27.0000
17.1000
INSLW02
M20X2.5
20.0000
34.0000
20.7000
INSLW03
M24X3
24.0000
41.0000
24.2000
INSLW04
M30X3.5
30.0000
50.0000
30.7000
INSLW05
M36X4
36.0000
60.0000
36.6000
ISO Hex Nuts
39 - 9
Hex Structural Nuts, Style 1, Grade A & B
Generic Part Name: INSS1

39 - 10
Name
Nom
Dia Thr
Pitch
Thread
Dia
Flat
Width
Nut
Thick
INSS101
M10X1.5
10.0000
16.0000
8.4000
INSS102
M12X1.75
12.0000
18.0000
10.8000
INSS103
M16X2
16.0000
24.0000
14.8000
INSS104
M20X2.5
20.0000
30.0000
18.0000
INSS105
M24X3
24.0000
36.0000
21.5000
INSS106
M30X3.5
30.0000
46.0000
25.6000
INSS107
M36X4
36.0000
55.0000
31.0000
Hex Structural Nuts, Large Flats, Style 1,

Grade B
Generic Part Name: INSLB

Nom
Dia Thr
Pitch
Thread
Dia
Flat
Width
Nut
Thick
INSLB01
M16X2
16.0000
27.0000
14.8000
INSLB02
M20X2.5
20.0000
34.0000
18.0000
INSLB03
M24X3
24.0000
41.0000
21.5000
INSLB04
M30X3.5
30.0000
50.0000
25.6000
INSLB05
M36X4
36.0000
60.0000
31.0000
ISO Hex Nuts
ISO Hex Nuts
Name
39 - 11
Hex Structural Nuts, Style 2, Grade A
Generic Part Name: INSS2

39 - 12
Name
Nom
Dia Thr
Pitch
Thread
Dia
Flat
Width
Nut
Thick
INSS201
M10X1.5
10.0000
16.0000
9.3000
INSS202
M12X1.75
12.0000
18.0000
12.0000
INSS203
M16X2
16.0000
24.0000
16.4000
Hex Nuts, Style 1, Metric Fine Pitch Thread,

Grade A & B
Generic Part Name: INHF

Nom
Dia Thr
Pitch
Thread
Dia
Flat
Width
Nut
Thick
INHF101
M8X1
8.0000
13.0000
6.8000
INHF102
M10X1
10.0000
16.0000
8.4000
INHF103
M12X1.5
12.0000
18.0000
10.8000
INHF104
M16X1.5
16.0000
24.0000
14.8000
INHF105
M20X1.5
20.0000
30.0000
18.0000
INHF106
M24X2
24.0000
36.0000
21.5000
INHF107
M30X2
30.0000
46.0000
25.6000
INHF108
M36X3
36.0000
55.0000
31.0000
INHF109
M42X3
42.0000
65.0000
34.0000
INHF110
M48X3
48.0000
75.0000
38.0000
INHF111
M56X4
56.0000
85.0000
45.0000
INHF112
M64X4
64.0000
95.0000
51.0000
ISO Hex Nuts
ISO Hex Nuts
Name
39 - 13
Hex Nuts, Style 2, Metric Fine Pitch Thread,

Grade A & B
Generic Part Name: INHF2

39 - 14
Name
Nom
Dia Thr
Pitch
Thread
Dia
Flat
Width
Nut
Thick
INHF201
M8X1
8.0000
13.0000
7.5000
INHF202
M10X1
10.0000
16.0000
9.3000
INHF203
M12X1.5
12.0000
18.0000
12.0000
INHF204
M16X1.5
16.0000
24.0000
16.4000
INHF205
M20X1.5
20.0000
30.0000
20.3000
INHF206
M24X2
24.0000
36.0000
23.9000
INHF207
M30X2
30.0000
46.0000
28.6000
INHF208
M36X3
36.0000
55.0000
34.7000
Hex Thin Nuts, Metric Fine Pitch Thread,

Grade A & B
Generic Part Name: INHTF

Nominal
Dia Thr
Pitch
Thread
Dia
Flat
Width
Nut
Thick
INHTF01
M8X1
8.0000
13.0000
4.0000
INHTF02
M10X1
10.0000
16.0000
5.0000
INHTF03
M12X1.5
12.0000
18.0000
6.0000
INHTF04
M16X1.5
16.0000
24.0000
8.0000
INHTF05
M20X1.5
20.0000
30.0000
10.0000
INHTF06
M24X2
24.0000
36.0000
12.0000
INHTF07
M30X2
30.0000
46.0000
15.0000
INHTF08
M36X3
36.0000
55.0000
18.0000
INHTF09
M42X3
42.0000
65.0000
21.0000
INHTF10
M48X3
48.0000
75.0000
24.0000
INHTF11
M56X4
56.0000
85.0000
28.0000
INHTF12
M64X4
64.0000
95.0000
32.0000
ISO Hex Nuts
ISO Hex Nuts
Name
39 - 15
39 - 16
40
ISO Prevailing Torque Type
Nuts
40 - 1
Prevailing Torque Hex Nuts, Style 1, with

Non-Metal Inserts
Generic Part Name: INPS1

40 - 2
Name
Nominal
Dia Thr
Pitch
Thread
Dia
Flat
Width
Hex
Height
Nut
Height
INPS101
M3X0.5
3.0000
5.5000
2.1500
4.5000
INPS102
M4X0.7
4.0000
7.0000
2.9000
6.0000
INPS103
M5X0.8
5.0000
8.0000
4.4000
6.8000
INPS104
M6X1
6.0000
10.0000
4.9000
8.0000
INPS105
M8X1.25
8.0000
13.0000
6.4400
9.5000
INPS106
M10X1.5
10.0000
16.0000
8.0400
11.9000
INPS107
M12X1.75
12.0000
18.0000
10.3700
14.9000
INPS108
M16X2
16.0000
24.0000
14.1000
19.1000
INPS109
M20X2.5
20.0000
30.0000
16.9000
22.8000
INPS110
M24X3
24.0000
36.0000
20.2000
27.1000
INPS111
M30X3.5
30.0000
46.0000
24.3000
32.6000
INPS112
M36X4
36.0000
55.0000
29.4000
38.9000
Prevailing Torque Hex Nuts, Style 2, with

Non-Metal Inserts
Generic Part Name: INPS2

Nom
Dia Thr
Pitch
Thread
Dia
Flat
Width
Hex
Height
Nut
Height
INPS201
M5X0.8
5.0000
8.0000
4.8000
7.2000
INPS202
M6X1
6.0000
10.0000
5.4000
8.5000
INPS203
M8X1.25
8.0000
13.0000
7.1400
10.2000
INPS204
M10X1.5
10.0000
16.0000
8.9400
12.8000
INPS205
M12X1.75
12.0000
18.0000
11.5700
16.1000
INPS206
M16X2
16.0000
24.0000
15.7000
20.7000
INPS207
M20X2.5
20.0000
30.0000
19.0000
25.1000
INPS208
M24X3
24.0000
36.0000
22.6000
29.5000
INPS209
M30X3.5
30.0000
46.0000
27.3000
35.6000
INPS210
M36X4
36.0000
55.0000
33.1000
42.6000
ISO Prevailing Torque Type Nuts
ISO Prevailing
Torque Type Nuts
Name
40 - 3
Prevailing Torque All-Metal Nuts, Style 2,

Property Class 5, 8, 10, 12
Generic Part Name: INPM2

Note:
40 - 4
Name
Nom
Dia Thr
Pitch
Thread
Dia
Flat
Width
Hex
Height
Nut
Height
INPM201
M5X0.8
5.0000
8.0000
4.8000
5.1000
INPM202
M6X1
6.0000
10.0000
5.4000
6.0000
INPM203
M8X1.25
8.0000
13.0000
7.1400
8.0000
INPM204
M10X1.5
10.0000
16.0000
8.9400
10.0000
INPM205
M12X1.75
12.0000
18.0000
11.5700
12.0000
INPM206
M16X2
16.0000
24.0000
15.7000
16.4000
INPM207
M20X2.5
20.0000
30.0000
19.0000
20.3000
INPM208
M24X3
24.0000
36.0000
22.6000
23.9000
INPM209
M30X3.5
30.0000
46.0000
27.3000
30.0000
INPM210
M36X4
36.0000
55.0000
33.1000
36.0000
Prevailing Torque Hex Nuts with Flange and

Non-Metal Inserts
Generic Part Name: INPFN

Nominal
Dia Thr
Pitch
Thread
Dia
Flat
Width
Hex
Height
Flange
Dia
Flange
Edge
Thick
Nut
Height
INPFN01
M5X0.8
5.0000
8.0000
4.7000
11.8000
1.00000
7.1000
INPFN02
M6X1
6.0000
10.0000
5.7000
14.2000
1.10000
9.1000
INPFN03
M8X1.25
8.0000
13.0000
7.6000
17.9000
1.20000
11.1000
INPFN04
M10X1.5
10.0000
15.0000
9.6000
21.8000
1.50000
13.5000
INPFN05
M12X1.75
12.0000
18.0000
11.6000
26.0000
1.80000
16.1000
INPFN06
M14X2
14.0000
21.0000
13.3000
29.9000
2.10000
18.2000
INPFN07
M16X2
16.0000
24.0000
15.3000
34.5000
2.40000
20.3000
INPFN08
M20X2.5
20.0000
30.0000
18.9000
42.8000
3.00000
24.8000
40 - 5
ISO Prevailing
Torque Type Nuts
Name
Prevailing Torque All-Metal Hex Nuts with

Flange
Generic Part Name: INPFM

Name
Nominal
Dia Thr
Pitch
Thread
Dia
Flat
Width
Hex
Height
Flange
Dia
Flange
Edge
Thick
Nut
Height
INPFM01
M5X0.8
5.0000
8.0000
4.7000
11.8000
1.00000
6.2000
INPFM02
M6X1
6.0000
10.0000
5.7000
14.2000
1.10000
7.3000
INPFM03
M8X1.25
8.0000
13.0000
7.6000
17.9000
1.20000
9.4000
INPFM04
M10X1.5
10.0000
15.0000
9.6000
21.8000
1.50000
11.4000
INPFM05
M12X1.75
12.0000
18.0000
11.6000
26.0000
1.80000
13.8000
INPFM06
M14X2
14.0000
21.0000
13.3000
29.9000
2.10000
15.9000
INPFM07
M16X2
16.0000
24.0000
15.3000
34.5000
2.40000
18.3000
INPFM08
M20X2.5
20.0000
30.0000
18.9000
42.8000
3.00000
22.4000
40 - 6

Property Class 5, 8, 10

Nominal
Dia Thr
Pitch
Thread
Dia
Flat
Width
Hex
Height
Nut
Height
INPM101
M5X0.8
5.0000
8.0000
4.4000
5.3000
INPM102
M6X1
6.0000
10.0000
4.9000
5.9000
INPM103
M8X1.25
8.0000
13.0000
6.4400
7.1000
INPM104
M10X1.5
10.0000
16.0000
8.0400
9.0000
INPM105
M12X1.75
12.0000
18.0000
10.3700
11.6000
INPM106
M16X2
16.0000
24.0000
14.1000
15.2000
INPM107
M20X2.5
20.0000
30.0000
16.9000
19.0000
INPM108
M24X3
24.0000
36.0000
20.2000
23.0000
INPM109
M30X3.5
30.0000
46.0000
24.3000
26.9000
INPM110
M36X4
36.0000
55.0000
29.4000
32.5000
ISO Prevailing
Torque Type Nuts
Name
40 - 7

Property Class 9

40 - 8
Name
Nom
Dia Thr
Pitch
Thread
Dia
Flat
Width
Hex
Height
Nut
Height
INPM901
M5X0.8
5.0000
8.0000
4.8000
5.3000
INPM902
M6X1
6.0000
10.0000
5.4000
6.7000
INPM903
M8X1.25
8.0000
13.0000
7.1400
8.0000
INPM904
M10X1.5
10.0000
16.0000
8.9400
10.5000
INPM905
M12X1.75
12.0000
18.0000
11.5700
13.3000
INPM906
M16X2
16.0000
24.0000
15.7000
17.9000
INPM907
M20X2.5
20.0000
30.0000
19.0000
21.8000
INPM908
M24X3
24.0000
36.0000
22.6000
26.4000
INPM909
M30X3.5
30.0000
46.0000
27.3000
31.8000
INPM910
M36X4
36.0000
55.0000
33.1000
38.5000
41
ISO Washers
41 - 1
Plain Washers, Normal Series, Grade A
Generic Part Name: IWPNA

41 - 2
Name
Nominal
Size
Hole
Dia
Outside
Dia
Washer
Thick
IWPNA01
1.6000
1.7000
4.0000
0.35000
IWPNA02
2.0000
2.2000
5.0000
0.35000
IWPNA03
2.5000
2.7000
6.0000
0.55000
IWPNA04
3.0000
3.2000
7.0000
0.55000
IWPNA05
3.5000
3.7000
8.0000
0.55000
IWPNA06
4.0000
4.3000
9.0000
0.90000
IWPNA07
5.0000
5.3000
10.0000
1.10000
IWPNA08
6.0000
6.4000
12.0000
1.80000
IWPNA09
8.0000
8.4000
16.0000
1.80000
IWPNA10
10.0000
10.5000
20.0000
2.20000
IWPNA11
12.0000
13.0000
24.0000
2.70000
IWPNA12
14.0000
15.0000
28.0000
2.70000
IWPNA13
16.0000
17.0000
30.0000
3.30000
IWPNA14
20.0000
21.0000
37.0000
3.30000
IWPNA15
24.0000
25.0000
44.0000
4.30000
IWPNA16
30.0000
31.0000
56.0000
4.30000
IWPNA17
36.0000
37.0000
66.0000
5.60000
Plain Washers, Chamfered, Normal Series,

Grade A
Generic Part Name: IWCNA

Nominal
Size
Hole
Dia
Outside
Dia
Washer
Thick
IWCNA01
5.0000
5.3000
10.0000
1.10000
IWCNA02
6.0000
6.4000
12.0000
1.80000
IWCNA03
8.0000
8.4000
16.0000
1.80000
IWCNA04
10.0000
10.5000
20.0000
2.20000
IWCNA05
12.0000
13.0000
24.0000
2.70000
IWCNA06
14.0000
15.0000
28.0000
2.70000
IWCNA07
16.0000
17.0000
30.0000
3.30000
IWCNA08
20.0000
21.0000
37.0000
3.30000
IWCNA09
24.0000
25.0000
44.0000
4.30000
IWCNA10
30.0000
31.0000
56.0000
4.30000
IWCNA11
36.0000
37.0000
66.0000
5.60000
ISO Washers
ISO Washers
Name
41 - 3
Plain Washers, Normal Series, Grade C
Generic Part Name: IWPNC

41 - 4
Name
Nominal
Size
Hole_
Dia
Outside
Dia
Washer
Thick
IWPNC01
5.0000
5.5000
10.0000
1.20000
IWPNC02
6.0000
6.6000
12.0000
1.90000
IWPNC03
8.0000
9.0000
16.0000
1.90000
IWPNC04
10.0000
11.0000
20.0000
2.30000
IWPNC05
12.0000
13.5000
24.0000
2.80000
IWPNC06
14.0000
15.5000
28.0000
2.80000
IWPNC07
16.0000
17.5000
30.0000
3.60000
IWPNC08
20.0000
22.0000
37.0000
3.60000
IWPNC09
24.0000
26.0000
44.0000
4.60000
IWPNC10
30.0000
33.0000
56.0000
4.60000
IWPNC11
36.0000
39.0000
66.0000
6.00000
Plain Washers, Small Series, Grade A
Generic Part Name: IWPSA

Nominal
Size
Hole
Dia
Outside
Dia
Washer
Thick
IWPSA01
1.6000
1.7000
3.5000
0.35000
IWPSA02
2.0000
2.2000
4.5000
0.35000
IWPSA03
2.5000
2.7000
5.0000
0.55000
IWPSA04
3.0000
3.2000
6.0000
0.55000
IWPSA05
3.5000
3.7000
7.0000
0.55000
IWPSA06
4.0000
4.3000
8.0000
0.55000
IWPSA07
5.0000
5.3000
9.0000
1.10000
IWPSA08
6.0000
6.4000
11.0000
1.80000
IWPSA09
8.0000
8.4000
15.0000
1.80000
IWPSA10
10.0000
10.5000
18.0000
1.80000
IWPSA11
12.0000
13.0000
20.0000
2.20000
IWPSA12
14.0000
15.0000
24.0000
2.70000
IWPSA13
16.0000
17.0000
28.0000
2.70000
IWPSA14
20.0000
21.0000
34.0000
3.30000
IWPSA15
24.0000
25.0000
39.0000
4.30000
IWPSA16
30.0000
31.0000
50.0000
4.30000
IWPSA17
36.0000
37.0000
60.0000
5.60000
ISO Washers
ISO Washers
Name
41 - 5
Plain Washers, Large Series, Grade A & C
Generic Part Name: IWPLA

41 - 6
Name
Nominal
Size
Hole
Dia
Outside
Dia
Washer
Thick
IWPLA01
3.0000
3.2000
9.000
0.90000
IWPLA02
3.5000
3.7000
11.000
0.90000
IWPLA03
4.0000
4.3000
12.000
1.10000
IWPLA04
5.0000
5.3000
15.000
1.40000
IWPLA05
6.0000
6.4000
18.000
1.80000
IWPLA06
8.0000
8.4000
24.000
2.20000
IWPLA07
10.0000
10.5000
30.000
2.70000
IWPLA08
12.0000
13.0000
37.000
3.30000
IWPLA09
14.0000
15.0000
44.000
3.30000
IWPLA10
16.0000
17.0000
50.000
3.30000
IWPLA11
20.0000
22.0000
60.000
4.60000
IWPLA12
24.0000
26.0000
72.000
6.00000
IWPLA13
30.0000
33.0000
92.000
7.00000
IWPLA14
36.0000
39.0000
110.000
9.20000
Plain Washers, Extra Large Series, Grade C
Generic Part Name: IWPEC

Nominal
Size
Hole
Dia
Outside
Dia
Washer
Thick
IWPEC01
5.0000
5.5000
18.000
2.30000
IWPEC02
6.0000
6.6000
22.000
2.30000
IWPEC03
8.0000
9.0000
28.000
3.60000
IWPEC04
10.0000
11.0000
34.000
3.60000
IWPEC05
12.0000
13.5000
44.000
4.60000
IWPEC06
14.0000
15.5000
50.000
4.60000
IWPEC07
16.0000
17.5000
56.000
6.00000
IWPEC08
20.0000
22.0000
72.000
7.00000
IWPEC09
24.0000
26.0000
85.000
7.00000
IWPEC10
30.0000
33.0000
105.000
7.00000
IWPEC11
36.0000
39.0000
125.000
9.20000
ISO Washers
ISO Washers
Name
41 - 7
Plain Washers, Structural, Hardened
Generic Part Name: IWPHS

41 - 8
Name
Nominal
Size
Hole
Dia
Outside
Dia
Washer
Thick
IWPHS01
12.0000
14.0000
27.0000
4.60000
IWPHS02
16.0000
18.0000
34.0000
4.60000
IWPHS03
20.0000
22.0000
42.0000
4.60000
IWPHS04
24.0000
26.0000
50.0000
4.60000
IWPHS05
30.0000
33.0000
60.0000
4.60000
IWPHS06
36.0000
39.0000
72.0000
4.60000
Plain Washers, Chamfered, Structural,

Hardened
Generic Part Name: IWCHS

Name
Nominal
Size
Hole
Dia
Outside
Dia
Washer
Thick
IWCHS01
12.0000
13.0000
25.0000
4.60000
IWCHS02
16.0000
17.0000
33.0000
4.60000
IWCHS03
20.0000
21.0000
40.0000
4.60000
IWCHS04
24.0000
25.0000
47.0000
4.60000
IWCHS05
30.0000
31.0000
56.0000
5.60000
IWCHS06
36.0000
37.0000
66.0000
5.60000
ISO Washers
ISO Washers
41 - 9
Plain Washers for Clevis Pins, Grade A
Generic Part Name: IWCPA

41 - 10
Name
Nominal
Size
Hole
Dia
Outside
Dia
Washer
Thick
IWCPA01
3.000
3.000
6.000
0.9000
IWCPA02
4.000
4.000
8.000
0.9000
IWCPA03
5.000
5.000
10.000
1.1000
IWCPA04
6.000
6.000
12.000
1.8000
IWCPA05
8.000
8.000
15.000
2.2000
IWCPA06
10.000
10.000
18.000
2.7000
IWCPA07
12.000
12.000
20.000
3.3000
IWCPA08
14.000
14.000
22.000
3.3000
IWCPA09
16.000
16.000
24.000
3.3000
IWCPA10
18.000
18.000
28.000
4.3000
IWCPA11
20.000
20.000
30.000
4.3000
IWCPA12
22.000
22.000
34.000
4.3000
IWCPA13
24.000
24.000
37.000
4.3000
Iwcpa14
27.000
27.000
39.000
5.6000
Iwcpa15
30.000
30.000
44.000
5.6000
Name
Nominal
Size
Hole
Dia
Outside
Dia
Washer
Thick
Iwcpa16
33.000
33.000
47.000
5.6000
Iwcpa17
36.000
36.000
50.000
6.6000
Iwcpa18
40.000
40.000
56.000
6.6000
Iwcpa19
45.000
45.000
60.000
6.6000
Iwcpa20
50.000
50.000
66.000
9.0000
Iwcpa21
55.000
55.000
72.000
9.0000
Iwcpa22
60.000
60.000
78.000
11.0000
Iwcpa23
70.000
70.000
92.000
11.0000
Iwcpa24
80.000
80.000
98.000
13.2000
Iwcpa25
90.000
90.000
110.000
13.2000
Iwcpa26
100.000
100.000
120.000
13.2000
ISO Washers
ISO Washers
41 - 11
41 - 12
42
ISO Pins
42 - 1
Split Pins, Metric Series
Generic Part Name: IPSMS

Name
Nominal
Size
Pin
Dia
Leg
Clev
Width
Pin Length
IPSMS01
0.6000
0.5000
1.60000
1.0000
4, 5, 6 to 12 by 2
IPSMS02
0.8000
0.7000
1.60000
1.4000
5, 6 to 16 by 2
IPSMS03
1.0000
0.9000
1.60000
1.8000
6 to 20 by 2
IPSMS04
1.2000
1.0000
2.50000
2.0000
8 to 22 by 2, 25
IPSMS05
1.6000
1.4000
2.50000
2.8000
8 to 22 by 2, 25, 28, 32
IPSMS06
2.0000
1.8000
2.50000
3.6000
10 to 22 by 2, 25, 28 to
40 by 4
IPSMS07
2.5000
2.3000
2.50000
4.6000
12 to 22 by 2, 25, 28 to
40 by 4, 45, 50
IPSMS08
3.2000
2.9000
3.20000
5.8000
14 to 22 by 2, 25, 28 to
40 by 4, 45, 50, 56, 63
IPSMS09
4.0000
3.7000
4.00000
7.4000
18, 20, 22, 25, 28 to 40

by 4, 45, 50, 56, 63, 71,
80
IPSMS10
5.0000
4.6000
4.00000
9.2000
22, 25, 28 to 40 by 4,
45, 50, 56, 63, 71, 80,
90, 100
42 - 2
Nominal
Size
Pin
Dia
Leg
Clev
Width
Pin Length
IPSMS11
6.3000
5.9000
4.00000
11.8000
32, 36, 40, 45, 50, 56,

63, 71, 80, 90, 100,
112, 125
IPSMS12
8.0000
7.5000
4.00000
15.0000
40, 45, 50, 56, 63, 71,

80, 90, 100, 112, 125,
140, 160
IPSMS13
10.0000
9.5000
6.30000
19.0000
45, 50, 56, 63, 71, 80,

90, 100, 112, 125, 140
to 200 by 20
IPSMS14
13.0000
12.4000
6.30000
24.8000
71, 80, 90, 100, 112,

125, 140 to 200 by 20,
224, 250
IPSMS15
16.0000
15.4000
6.30000
30.8000
112, 140 to 200 by 20,

224, 250, 280
IPSMS16
20.0000
19.3000
6.30000
38.6000
160 to 200 by 20, 224,

250, 280
Parallel Pins, Unhardened
Generic Part Name: IPPUC

Notes:
ISO Pins

42 - 3
ISO Pins
Name
42 - 4
Name
Pin Dia
Length
IPPUC01
0.6000
2, 3, 4, 5, 6
IPPUC02
0.8000
2, 3, 4, 5, 6, 8
IPPUC03
1.0000
4, 5, 6, 8, 10
IPPUC04
1.2000
4, 5, 6 to 12 by 2
IPPUC05
1.5000
4, 5, 6 to 16 by 2
IPPUC06
2.0000
6 to 20 by 2
IPPUC07
2.5000
6 to 24 by 2
IPPUC08
3.0000
8 to 30 by 2
IPPUC09
4.0000
8 to 32 by 2, 35, 40
IPPUC10
5.0000
10 to 32 by 2, 35 to 50 by 5
IPPUC11
6.0000
12 to 32 by 2, 35 to 60 by 5
IPPUC12
8.0000
14 to 32 by 2, 35 to 80 by 5
IPPUC13
10.0000
18 to 32 by 2, 35 to 95 by 5
IPPUC14
12.0000
26 to 32 by 2, 35 to 100 by 5
IPPUC15
16.0000
26 to 32 by 2, 35 to 95 by 5,
100 to 180 by 20
IPPUC16
20.0000
35 to 95 by 5, 100 to 200 by 20
IPPUC17
25.0000
50 to 95 by 5, 100 to 200 by 20
IPPUC18
30.0000
60 to 95 by 5, 100 to 200 by 20
IPPUC19
40.0000
80 to 95 by 5, 100 to 200 by 20
IPPUC20
50.0000
95, 100 to 200 by 20
Taper Pins, Unhardened

ISO Pins
Generic Part Name: IPTUC

Notes:

Name
Pin Dia
Length
IPTUC01
0.6000
4, 5, 6, 8
IPTUC02
0.8000
5, 6 to 12 by 2
IPTUC03
1.0000
6 to 16 by 2
IPTUC04
1.2000
6 to 20 by 2
IPTUC05
1.5000
8 to 24 by 2
IPTUC06
2.0000
10 to 32 by 2, 35
IPTUC07
2.5000
10 to 32 by 2, 35
IPTUC08
3.0000
12 to 32 by 2, 35, 40, 45
IPTUC09
4.0000
14 to 32 by 2, 35 to 55 by 5
IPTUC10
5.0000
18 to 32 by 2, 35 to 60 by 5
IPTUC11
6.0000
22 to 32 by 2, 35 to 90 by 5
IPTUC12
8.0000
22 to 32 by 2, 35 to 100 by 5, 120
IPTUC13
10.0000
26 to 32 by 2, 35 to 95 by 5, 100 to 160 by 20
ISO Pins
42 - 5
Name
Pin Dia
Length
IPTUC14
12.0000
32, 35 to 95 by 5, 100 to 180 by 20
IPTUC15
16.0000
40 to 95 by 5, 100 to 200 by 20
IPTUC16
20.0000
45 to 95 by 5, 100 to 200 by 20
IPTUC17
25.0000
50 to 95 by 5, 100 to 200 by 20
IPTUC18
30.0000
55 to 95 by 5, 100 to 200 by 20
IPTUC19
40.0000
60 to 95 by 5, 100 to 200 by 20
IPTUC20
50.0000
65 to 95 by 5, 100 to 200 by 20
Clevis Pins without Heads
Generic Part Name: IPCWH

Notes:

Name
Pin
Dia
Hole
Dia
Hole
Dist
Length
IPCWH01
3.000
0.8000
1.6000
6 to 30 by 2
IPCWH02
4.000
1.0000
2.2000
8 to 32 by 2, 35, 40
IPCWH03
5.000
1.2000
2.9000
10 to 32 by 2, 35 to 50 by 5
42 - 6
Pin
Dia
Hole
Dia
Hole
Dist
Length
IPCWH04
6.000
1.6000
3.2000
12 to 32 by 2, 35 to 60 by 5
IPCWH05
8.000
2.0000
3.5000
16 to 32 by 2, 35 to 80 by 5
IPCWH06
10.000
3.2000
4.5000
20 to 32 by 2, 35 to 100 by 5
IPCWH07
12.000
3.2000
5.5000
24 to 32 by 2, 35 to 100 by 5, 120
IPCWH08
14.000
4.0000
6.0000
28, 30, 32, 35 to 100 by 5, 120, 140
IPCWH09
16.000
4.0000
6.0000
32, 35 to 95 by 5, 100 to 160 by 20
IPCWH10
18.000
5.0000
7.0000
35 to 95 by 5, 100 to 180 by 20
IPCWH11
20.000
5.0000
8.0000
40 to 95 by 5, 100 to 200 by 20
IPCWH12
22.000
5.0000
8.0000
45 to 95 by 5, 100 to 200 by 20
IPCWH13
24.000
6.3000
9.0000
50 to 95 by 5, 100 to 200 by 20
IPCWH14
27.000
6.3000
9.0000
55 to 95 by 5, 100 to 200 by 20
IPCWH15
30.000
8.0000
10.0000
60 to 95 by 5, 100 to 200 by 20
IPCWH16
33.000
8.0000
10.0000
65 to 95 by 5, 100 to 200 by 20
IPCWH17
36.000
8.0000
10.0000
70 to 95 by 5, 100 to 200 by 20
IPCWH18
40.000
8.0000
10.0000
80, 90, 95, 100 to 200 by 20
IPCWH19
45.000
10.0000
12.0000
90, 95, 100 to 200 by 20
IPCWH20
50.000
10.0000
12.0000
100 to 200 by 20
IPCWH21
55.000
10.0000
14.0000
120 to 200 by 20
IPCWH22
60.000
10.0000
14.0000
120 to 200 by 20
IPCWH23
70.000
13.0000
16.0000
140 to 200 by 20
IPCWH24
80.000
13.0000
16.0000
160, 180, 200
IPCWH25
90.000
13.0000
16.0000
180, 200
IPCWH26
100.000
13.0000
16.0000
200
ISO Pins
ISO Pins
Name
42 - 7
Clevis Pins with Heads
Generic Part Name: IPCHH

Notes:

Name
Pin Dia
Hole
Dia
Hole
Dist
Head
Dia
Head
Height
Length
IPCHH01
3.000
0.8000
1.6000
5.000
1.0000
6 to 30 by 2
IPCHH02
4.000
1.0000
2.2000
6.000
1.0000
8 to 32 by 2, 35, 40
IPCHH03
5.000
1.2000
2.9000
8.000
1.6000
10 to 32 by 2, 35 to
50 by 5
IPCHH04
6.000
1.6000
3.2000
10.000
2.0000
12 to 32 by 2, 35 to
60 by 5
IPCHH05
8.000
2.0000
3.5000
14.000
3.0000
16 to 32 by 2, 35 to
80 by 5
IPCHH06
10.000
3.2000
4.5000
18.000
4.0000
20 to 32 by 2, 35 to
100 by 5
IPCHH07
12.000
3.2000
5.5000
20.000
4.0000
24 to 32 by 2, 35 to
100 by 5, 120
IPCHH08
14.000
4.0000
6.0000
22.000
4.0000
28, 30, 32, 35 to 95

by 5, 100, 120, 140
IPCHH09
16.000
4.0000
6.0000
25.000
4.5000
32, 35 to 95 by 5,
100 to 160 by 20
42 - 8
Pin Dia
Hole
Dia
Hole
Dist
Head
Dia
Head
Height
Length
IPCHH10
18.000
5.0000
7.0000
28.000
5.0000
35 to 95 by 5, 100
to 180 by 20
IPCHH11
20.000
5.0000
8.0000
30.000
5.0000
40 to 95 by 5, 100
to 200 by 20
IPCHH12
22.000
5.0000
8.0000
33.000
5.5000
45 to 95 by 5, 100
to 200 by 20
IPCHH13
24.000
6.3000
9.0000
36.000
6.0000
50 to 95 by 5, 100
to 200 by 20
IPCHH14
27.000
6.3000
9.0000
40.000
6.0000
55 to 95 by 5, 100
to 200 by 20
IPCHH15
30.000
8.0000
10.0000
44.000
8.0000
60 to 95 by 5, 100
to 200 by 20
IPCHH16
33.000
8.0000
10.0000
47.000
8.0000
65 to 95 by 5, 100
to 200 by 20
IPCHH17
36.000
8.0000
10.0000
50.000
8.0000
70 to 95 by 5, 100
to 200 by 20
IPCHH18
40.000
8.0000
10.0000
55.000
8.0000
80 to 95 by 5, 100
to 200 by 20
IPCHH19
45.000
10.0000
12.0000
60.000
9.0000
90, 95, 100 to 200

by 20
IPCHH20
50.000
10.0000
12.0000
66.000
9.0000
100 to 200 by 20
IPCHH21
55.000
10.0000
14.0000
72.000
11.0000
120 to 200 by 20
IPCHH22
60.000
10.0000
14.0000
78.000
12.0000
120 to 200 by 20
IPCHH23
70.000
13.0000
16.0000
90.000
13.0000
140 to 200 by 20
IPCHH24
80.000
13.0000
16.0000
100.000
13.0000
160, 180, 200
IPCHH25
90.000
13.0000
16.0000
110.000
13.0000
180, 200
IPCHH26
100.000
13.0000
16.0000
120.000
13.0000
200
ISO Pins
42 - 9
ISO Pins
Name
Parallel Pins with Internal Thread, Unhardened
Generic Part Name: IPPUT

Notes:

Name
Pin Dia
Thread
Dia
Thread
Depth
Length
IPPUT01
6.0000
4.0000
6.0000
16 to 32 by 2, 35 to 60 by 5
IPPUT02
8.0000
5.0000
8.0000
18 to 32 by 2, 35 to 80 by 5
IPPUT03
10.0000
6.0000
10.0000
22 to 32 by 2, 35 to 100 by 5
IPPUT04
12.0000
6.0000
12.0000
26 to 32 by 2, 35 to 100 by 5, 120
IPPUT05
16.0000
8.0000
16.0000
32, 35 to 95 by 5, 100 to 160 by

20
IPPUT06
20.0000
10.0000
18.0000
40 to 95 by 5, 100 to 200 by 20
IPPUT07
25.0000
16.0000
24.0000
50 to 95 by 5, 100 to 200 by 20
IPPUT08
30.0000
20.0000
30.0000
60 to 95 by 5, 100 to 200 by 20
IPPUT09
40.0000
20.0000
30.0000
80 to 95 by 5, 100 to 200 by 20
IPPUT10
50.0000
24.0000
36.0000
100 to 200 by 20
42 - 10
Parallel Pins, Hardened (Dowel Pins)

ISO Pins
Generic Part Name: IPPHD

Notes:
ISO Pins

Name
Pin Dia
Length
IPPHD01
1.0000
3, 4, 5, 6, 8, 10
IPPHD02
1.5000
4, 5, 6 to 16 by 2
IPPHD03
2.0000
5, 6 to 20 by 2
IPPHD04
2.5000
6 to 24 by 2
IPPHD05
3.0000
8 to 30 by 2
IPPHD06
4.0000
10 to 32 by 2, 35, 40
IPPHD07
5.0000
12 to 32 by 2, 35 to 50 by 5
IPPHD08
6.0000
14 to 32 by 2, 35 to 60 by 5
IPPHD09
8.0000
18 to 32 by 2, 35 to 80 by 5
IPPHD10
10.0000
22 to 32 by 2, 35 to 100 by 5
IPPHD11
12.0000
26 to 32 by 2, 35 to 100 by 5
IPPHD12
16.0000
40 to 100 by 5
IPPHD13
20.0000
50 to 100 by 5
42 - 11
Parallel Pins with Internal Thread, Hardened
Generic Part Name: IPPHT

Notes:

Name
Pin Dia
Thread
Dia
Thread
Depth
Length
IPPHT01
6.0000
4.0000
6.0000
16 to 32 by 2, 35 to 60 by 5
IPPHT02
8.0000
5.0000
8.0000
18 to 32 by 2, 35 to 80 by 5
IPPHT03
10.0000
6.0000
10.0000
22 to 32 by 2, 35 to 100 by 5
IPPHT04
12.0000
6.0000
12.0000
26 to 32 by 2, 35 to 100 by 5, 120
IPPHT05
16.0000
8.0000
16.0000
32, 35 to 95 by 5, 100 to 160 by 20
IPPHT06
20.0000
10.0000
18.0000
40 to 95 by 5, 100 to 200 by 20
IPPHT07
25.0000
16.0000
24.0000
50 to 95 by 5, 100 to 200 by 20
IPPHT08
30.0000
20.0000
30.0000
60 to 95 by 5, 100 to 200 by 20
IPPHT09
40.0000
20.0000
30.0000
80 to 95 by 5, 100 to 200 by 20
IPPHT10
50.0000
24.0000
36.0000
100 to 200 by 20
42 - 12
Taper Pins with Internal Thread, Unhardened

ISO Pins
Generic Part Name: IPTUT

Notes:

Name
Pin Dia
Thread
Dia
Thread
Depth
Length
IPTUT01
6.0000
4.0000
6.0000
16 to 32 by 2, 35 to 60 by 5
IPTUT02
8.0000
5.0000
8.0000
18 to 32 by 2, 35 to 80 by 5
IPTUT03
10.0000
6.0000
10.0000
22 to 32 by 2, 35 to 100 by 5
IPTUT04
12.0000
6.0000
12.0000
26 to 32 by 2, 35 to 100 by 5, 120
IPTUT05
16.0000
8.0000
16.0000
32, 35 to 95 by 5, 100 to 160 by 20
IPTUT06
20.0000
10.0000
18.0000
40 to 95 by 5, 100 to 200 by 20
IPTUT07
25.0000
16.0000
24.0000
50 to 95 by 5, 100 to 200 by 20
IPTUT08
30.0000
20.0000
30.0000
60 to 95 by 5, 100 to 200 by 20
IPTUT09
40.0000
20.0000
30.0000
80 to 95 by 5, 100 to 200 by 20
IPTUT10
50.0000
24.0000
36.0000
100 to 200 by 20
ISO Pins
42 - 13
Taper Pins with External Thread, Unhardened
Generic Part Name: IPTET

Notes:

Name
Pin Dia
Thread
Length
Thread
Dia
Length
IPTET01
5.0000
15.6000
5.0000
40, 45, 50
IPTET02
6.0000
20.0000
6.0000
45 to 60 by 5
IPTET03
8.0000
24.5000
8.0000
55, 60, 65, 75
IPTET04
10.0000
27.0000
10.0000
65, 75, 85, 100
IPTET05
12.0000
30.5000
12.0000
85, 100, 120
IPTET06
16.0000
39.0000
16.0000
100 to 160 by 20
IPTET07
20.0000
39.0000
16.0000
120, 140, 160, 190
IPTET08
25.0000
45.0000
20.0000
140, 160 to 250 by 30
IPTET09
30.0000
52.0000
24.0000
160 to 280 by 30
IPTET10
40.0000
65.0000
30.0000
190 to 280 by 30, 320
IPTET11
50.0000
78.0000
36.0000
220, 250, 280 to 400 by 40
42 - 14
Generic Part Name: IPGPG

Notes:

Name
Pin Dia
Neck
Length
Pin Dia
Exp
Length
IPGPG01
1.5000
2.00000
1.6000
8 to 20 by 2
IPGPG02
2.0000
2.00000
2.1500
8 to 30 by 2
IPGPG03
2.5000
2.50000
2.6500
10 to 30 by 2
IPGPG04
3.0000
2.50000
3.2000
10 to 32 by 2, 35, 40
IPGPG05
4.0000
3.00000
4.2500
10 to 32 by 2, 35 to 60 by 5
IPGPG06
5.0000
3.00000
5.2500
14 to 32 by 2, 35 to 60 by 5
IPGPG07
6.0000
4.00000
6.3000
14 to 32 by 2, 35 to 80 by 5
IPGPG08
8.0000
4.00000
8.3000
14 to 32 by 2, 35 to 100 by 5
IPGPG09
10.0000
5.00000
10.3500
14 to 32 by 2, 35 to 100 by 5
IPGPG10
12.0000
5.00000
12.3500
18 to 32 by 2, 35 to 100 by 5
IPGPG11
16.0000
5.00000
16.4000
22 to 32 by 2, 35 to 100 by 5
IPGPG12
20.0000
7.00000
20.5000
26 to 32 by 2, 35 to 100 by 5
ISO Pins
42 - 15
ISO Pins
Grooved Pins, Full-Length Parallel Grooved

with Pilot
Name
Pin Dia
Neck
Length
Pin Dia
Exp
Length
IPGPG13
25.0000
7.00000
25.5000
26 to 32 by 2, 35 to 100 by 5
Grooved Pins, Full-Length Parallel Grooved

with Chamfer
Generic Part Name: IPGPC

Notes:

Name
Pin Dia
Chamfer
Pin Dia
Exp
Length
IPGPC01
1.5000
0.60000
1.6000
8 to 20 by 2
IPGPC02
2.0000
0.80000
2.1500
8 to 30 by 2
IPGPC03
2.5000
1.00000
2.6500
10 to 30 by 2
IPGPC04
3.0000
1.20000
3.2000
10 to 32 by 2, 35, 40
IPGPC05
4.0000
1.40000
4.2500
10 to 32 by 2, 35 to 60 by 5
IPGPC06
5.0000
1.70000
5.2500
14 to 32 by 2, 35 to 60 by 5
42 - 16
Pin Dia
Chamfer
Pin Dia
Exp
Length
IPGPC07
6.0000
2.10000
6.3000
14 to 32 by 2, 35 to 80 by 5
IPGPC08
8.0000
2.60000
8.3000
14 to 32 by 2, 35 to 100 by 5
IPGPC09
10.0000
3.00000
10.3500
14 to 32 by 2, 35 to 100 by 5
IPGPC10
12.0000
3.80000
12.3500
18 to 32 by 2, 35 to 100 by 5
IPGPC11
16.0000
4.60000
16.4000
22 to 32 by 2, 35 to 100 by 5
IPGPC12
20.0000
6.00000
20.5000
26 to 32 by 2, 35 to 100 by 5
IPGPC13
25.0000
7.50000
25.5000
26 to 32 by 2, 35 to 100 by 5
Grooved Pins, Half-Length Reverse Taper

Grooved
Generic Part Name: IPGTH

Notes:
ISO Pins

42 - 17
ISO Pins
Name
42 - 18
Name
Pin
Dia
Length
Neck
Length
Exp
Dia
IPGTH01
1.5000
8 to 20 by 2
length/2
If length <= 10, exp_dia = 1.6

If length > 10, exp_dia = 1.63
IPGTH02
2.0000
8 to 30 by 2
length/2

IPGTH03
2.5000
8 to 30 by 2
length/2

If length > 12 & length < 22, exp_dia = 2.65
If length >= 22, exp_dia = 2.7
IPGTH04
3.0000
8 to 32 by 2, 35, 40
length/2

If length > 12 & length <= 16, exp_dia is 3.15
If length > 16 & length <= 24, exp_dia = 3.2
IPGTH05
4.0000
10 to 32 by 2, 35 to 60 by 5
length/2
If length <=12, exp_dia = 4.15

IPGTH06
5.0000
10 to 32 by 2, 35 to 60 by 5
length/2

IPGTH07
6.0000
12 to 32 by 2, 35 to 80 by 5
length/2

ISO Pins
Name
Pin
Dia
Length
Neck
Length
Exp
Dia
IPGTH08
8.0000
14 to 32 by 2,
35 to 100 by 5
length/2

IPGTH09
10.0000
18 to 32 by 2, 35 to 95 by 5,
100 to 160 by 20
length/2

IPGTH10
12.0000
26 to 32 by 2, 35 to 95 by 5,
100 to 200 by 20
length/2

IPGTH11
16.0000
26 to 32 by 2, 35 to 95 by 5,
100 to 200 by 20
length/2

42 - 19
ISO Pins
42 - 20
Name
Pin
Dia
Length
Neck
Length
Exp
Dia
IPGTH12
20.0000
26 to 32 by 2, 35 to 95 by 5,
100 to 200 by 20
length/2

IPGTH13
25.0000
26 to 32 by 2, 35 to 95 by 5,
100 to 200 by 20
length/2

Grooved Pins, Third-Length Centre Grooved
Notes:
42 - 21
Name
Pin
Dia
Length
Neck
Length
Exp Dia
IPGTT01
1.5000
8 to 20 by 2
length/3

IPGTT02
2.0000
12 to 30 by 2
length/3

IPGTT03
2.5000
12 to 30 by 2
length/3

If length >16, exp_dia = 2.65
IPGTT04
3.0000
12 to 32 by 2, 35, 40
length/3

IPGTT05
4.0000
18 to 32 by 2,
35 to 60 by 5
length/3

IPGTT06
5.0000
18 to 32 by 2,
35 to 60 by 5
length/3

ISO Pins
ISO Pins
Generic Part Name: IPGTT
42 - 22
Name
Pin
Dia
Length
Neck
Length
Exp Dia
IPGTT07
6.0000
22 to 32 by 2,
35 to 80 by 5
length/3

If length > 24 & length <=35, exp_dia = 6.25
IPGTT08
8.0000
26 to 32 by 2,
35 to 100 by 5
length/3

If length > 45 & length <= 65, exp_dia = 8.35,
IPGTT09
10.0000
32, 35 to 95 by 5,
100 to 160 by 20
length/3

IPGTT10
12.0000
40 to 95 by 5,
100 to 200 by 20
length/3

IPGTT11
16.0000
45 to 95 by 5,
100 to 200 by 20
length/3

ISO Pins
Name
Pin
Dia
Length
Neck
Length
Exp Dia
IPGTT12
20.0000
45 to 95 by 5,
100 to 200 by 20
length/3

IPGTT13
25.0000
45 to 95 by 5,
100 to 200 by 20
length/3

Grooved Pins, Half-Length Centre Grooved
42 - 23
ISO Pins
42 - 24
Generic Part Name: IPGCG

Notes:
Name
Pin
Dia
Length
Neck
Length
Exp Dia
IPGCG01
1.5000
8 to 20 by 2
length/4

IPGCG02
2.0000
12 to 30 by 2
length/4

IPGCG03
2.5000
12 to 30 by 2
length/4

IPGCG04
3.0000
12 to 32 by 2, 35, 40
length/4

If length > 16, & length <= 24, exp_dia = 3.15
IPGCG05
4.0000
18 to 32 by 2, 35 to
60 by 5
length/4

IPGCG06
5.0000
18 to 32 by 2, 35 to
60 by 5
length/4

42 - 25
Pin
Dia
Length
Neck
Length
Exp Dia
IPGCG07
6.0000
22 to 32 by 2, 35 to
80 by 5
length/4

IPGCG08
8.0000
26 to 32 by 2, 35 to
100 by 5
length/4

IPGCG09
10.0000
32, 35 to 95 by 5,
100 to 160 by 20
length/4

IPGCG10
12.0000
40 to 95 by 5, 100 to
200 by 20
length/4

IPGCG11
16.0000
45 to 95 by 5, 100 to
200 by 20
length/4

IPGCG12
20.0000
45 to 95 by 5, 100 to
200 by 20
length/4

ISO Pins
ISO Pins
Name
42 - 26
Name
Pin
Dia
Length
Neck
Length
Exp Dia
IPGCG13
25.0000
45 to 95 by 5, 100 to
200 by 20
length/4

Grooved Pins, Full-Length Taper Grooved
Generic Part Name: IPGTF

Notes:
ISO Pins
Name
Pin
Dia
Length
Exp Dia
IPGTF01
1.5000
8 to 20 by 2

IPGTF02
2.0000
8 to 30 by 2
IPGTF03
2.5000
8 to 30 by 2

IPGTF04
3.0000
8 to 32 by 2, 35, 40

IPGTF05
4.0000
8 to 32 by 2,
35 to 60 by 5

IPGTF06
5.0000
8 to 32 by 2,
35 to 60 by 5

IPGTF07
6.0000
10 to 32 by 2,
35 to 80 by 5

42 - 27
ISO Pins
42 - 28
Name
Pin
Dia
Length
Exp Dia
IPGTF08
8.0000
12 to 32 by 2,
35 to 100 by 5

IPGTF09
10.0000
14 to 32 by 2,
35 to100 by 5, 129

IPGTF10
12.0000
14 to 32 by 2,
35 to 100 by 5, 120

IPGTF11
16.0000
24 to 32 by 2,
35 to 100 by 5, 120

IPGTF12
20.0000
26 to 32 by 2,
35 to 100 by 5, 120
IPGTF13
25.0000
26 to 32 by 2,
35 to 100 by 5, 120
ISO Pins
Grooved Pins, Half-Length Taper Grooved
Generic Part Name: IPGHT

Notes:
Pin
Dia
Length
Exp Dia
IPGHT01
1.5000
8 to 20 by 2

IPGHT02
2.0000
8 to 30 by 2
ISO Pins
42 - 29
Name
42 - 30
Name
Pin
Dia
Length
Exp Dia
IPGHT03
2.5000
8 to 30 by 2

IPGHT04
3.0000
8 to 32 by 2, 35, 40

If length >8 & length <= 16, exp_dia = 3.30
IPGHT05
4.0000
10 to 32 by 2, 35 to 60 by 5

IPGHT06
5.0000
10 to 32 by 2, 35 to 60 by 5

IPGHT07
6.0000
10 to 32 by 2, 35 to 80 by 5

IPGHT08
8.0000
14 to 32 by 2, 35 to 100 by 5

ISO Pins
Name
Pin
Dia
Length
Exp Dia
IPGHT09
10.0000
14 to 32 by 2, 35 to 95 by 5,
100 to 200 by 20

IPGHT10
12.0000
18 to 32 by 2, 35 to 95 by 5,
100 to 200 by 20

IPGHT11
16.0000
26 to 32 by 2, 35 to 95 by 5,
100 to 200 by 20

IPGHT12
20.0000
26 to 32 by 2, 35 to 95 by 5,
100 to 200 by 20
IPGHT13
25.0000
26 to 32 by 2, 35 to 95 by 5,
100 to 200 by 20
42 - 31
ISO Pins
Grooved Pins with Round Head
Generic Part Name: IPGRH

Notes:

Name
Pin
Dia
Head
Dia
Head
Height
Exp
Dia
Length
IPGRH01
1.4000
2.6000
0.9000
1.5000
3, 4, 5, 6
IPGRH02
1.6000
3.0000
1.1000
1.7000
3, 4, 5, 6, 8
IPGRH03
2.0000
3.7000
1.3000
2.1500
3, 4, 5, 6, 8, 10
IPGRH04
2.5000
4.6000
1.6000
2.7000
3, 4, 5, 6, to 12 by 2
IPGRH05
3.0000
5.4500
1.9500
3.2000
4, 5, 6 to 12 by 2, 16
IPGRH06
4.0000
7.2500
2.5500
4.2500
5, 6 to 12 by 2, 16, 20
IPGRH07
5.0000
9.1000
3.1500
5.2500
6 to 12 by 2, 16, 20, 25
IPGRH08
6.0000
10.8000
3.7500
6.3000
8, 10, 12, 16, 20, 25, 30
IPGRH09
8.0000
14.4000
5.0000
8.3000
10, 12, 16, 20 to 40 by 5
IPGRH10
10.0000
16.0000
7.4000
10.3500
12, 16, 20 to 40 by 5
IPGRH11
12.0000
19.0000
8.4000
12.3500
16, 20 to 40 by 5
IPGRH12
16.0000
25.0000
10.9000
16.4000
20 to 40 by 5
IPGRH13
20.0000
32.0000
13.9000
20.5000
25 to 40 by 5
42 - 32
Grooved Pins with Countersunk Head

ISO Pins
Generic Part Name: IPGCH

Notes:

Name
Pin
Dia
Exp
Dia
Head
Dia
Length
IPGCH01
1.4000
1.5000
2.7000
3, 4, 5, 6
IPGCH02
1.6000
1.7000
3.0000
3, 4, 5, 6, 8
IPGCH03
2.0000
2.1500
3.7000
4, 5, 6, 8, 10
IPGCH04
2.5000
2.7000
4.6000
4, 5, 6 to 12 by 2
IPGCH05
3.0000
3.2000
5.4500
5, 6 to 12, 16
IPGCH06
4.0000
4.2500
7.2500
6 to 12 by 2, 16, 20
IPGCH07
5.0000
5.2500
9.1000
8, 10, 12, 16, 20, 25
IPGCH08
6.0000
6.3000
10.8000
8, 10, 12, 16, 20, 25, 30
IPGCH09
8.0000
8.3000
14.4000
10, 12, 16, 20 to 40 by 5
IPGCH10
10.0000
10.3500
16.0000
12, 16, 20 to 40 by 5
IPGCH11
12.0000
12.3500
19.0000
16, 20 to 40 by 5
IPGCH12
16.0000
16.4000
26.0000
20 to 40 by 5
IPGCH13
20.0000
20.5000
31.5000
25 to 40 by 5
ISO Pins
42 - 33
Spring-Type Straight Pins, Coiled and Heavy

Duty
Generic Part Name: IPSCH

Notes:

Name
Nominal
Dia
Pin
Dia
Pilot
Dia
Length
IPSCH01
1.5000
1.7100
1.4000
4, 5, 6 to 26 by 2
IPSCH02
2.0000
2.2100
1.9000
4, 5, 6 to 32 by 2, 35, 40
IPSCH03
2.5000
2.7300
2.4000
5, 6 to 32 by 2, 35, 40, 45
IPSCH04
3.0000
3.2600
2.9000
6 to 32 by 2, 35 to 50 by 5
IPSCH05
3.5000
3.7900
3.4000
6 to 32 by 2, 35 to 50 by 5
IPSCH06
4.0000
4.3000
3.9000
8 to 32 by 2, 35 to 60 by 5
IPSCH07
5.0000
5.3500
4.8500
10 to 32 by 2, 35 to 60 by 5
IPSCH08
6.0000
6.4000
5.8500
12 to 32 by 2, 35 to 75 by 5
IPSCH09
8.0000
8.5500
7.8000
16 to 32 by 2, 35 to 100 by 5,
120
42 - 34
Nominal
Dia
Pin
Dia
Pilot
Dia
Length
IPSCH10
10.0000
10.6500
9.7500
20 to 32 by 2, 35 to 100 by 5,
120
IPSCH11
12.0000
12.7500
11.7000
24 to 32 by 2, 35 to 95 by 5,
100 to 160 by 20
IPSCH12
14.0000
14.8500
13.6000
28, 30, 32, 35 to 95 by 5, 100

to 200 by 20
IPSCH13
16.0000
16.9000
15.6000
35 to 95 by 5, 100 to 200 by
20
IPSCH14
20.0000
21.0000
19.6000
45 to 95 by 5, 100 to 200 by
20
Spring-Type Straight Pins, Coiled and

Standard Duty
Generic Part Name: IPSCS

Notes:
ISO Pins

42 - 35
ISO Pins
Name
Name
Nominal
Dia
Pin
Dia
Pilot
Dia
Length
IPSCS01
0.8000
0.9100
0.7500
4, 5, 6 to 16 by 2
IPSCS02
1.0000
1.1500
0.9500
4, 5, 6 to 16 by 2
IPSCS03
1.2000
1.3500
1.1500
4, 5, 6 to 16 by 2
IPSCS04
1.5000
1.7300
1.4000
4, 5, 6 to 24 by 2
IPSCS05
2.0000
2.2500
1.9000
4, 5, 6 to 32 by 2, 35, 40
IPSCS06
2.5000
2.7800
2.4000
5, 6 to 32 by 2, 35, 40, 45
IPSCS07
3.0000
3.3000
2.9000
6 to 32 by 2, 35 to 50 by 5
IPSCS08
3.5000
3.8400
3.4000
6 to 32 by 2, 35 to 50 by 5
IPSCS09
4.0000
4.4000
3.9000
8 to 32 by 2, 35 to 60 by 5
IPSCS10
5.0000
5.5000
4.8500
10 to 32 by 2, 35 to 60 by 5
IPSCS11
6.0000
6.5000
5.8500
12 to 32 by 2, 35 to 75 by 5
IPSCS12
8.0000
8.6300
7.8000
16 to 32 by 2, 35 to 100 by 5, 120
IPSCS13
10.0000
10.8000
9.7500
20 to 32 by 2, 35 to 100 by 5, 120
IPSCS14
12.0000
12.8500
11.7000
24 to 32 by 2, 35 to 95 by 5, 100
to 160 by 20
IPSCS15
14.0000
14.9500
13.6000
28, 30, 32, 35 to 95 by 5, 100 to

200 by 20
IPSCS16
16.0000
17.0000
15.6000
32, 35 to 95 by 5, 100 to 200 by

20
IPSCS17
20.0000
21.1000
19.6000
45 to 95 by 5, 100 to 200 by 20
Spring-Type Straight Pins, Coiled and Light

Duty
Generic Part Name: IPSCL
Notes:
42 - 36

ISO Pins
Name
Nominal
Dia
Pin
Dia
Pilot
Dia
Length
IPSCL01
1.50000
1.75000
1.40000
4, 5, 6 to 24 by 2
IPSCL02
2.00000
2.28000
1.90000
4, 5, 6 to 32 by 2, 35, 40
IPSCL03
2.50000
2.82000
2.40000
5, 6 to 32 by 2, 35, 40, 45
IPSCL04
3.00000
3.35000
2.90000
6 to 32 by 2, 35 to 50 by 5
IPSCL05
3.50000
3.87000
3.40000
6 to 32 by 2, 35 to 50 by 5
IPSCL06
4.00000
4.45000
3.90000
8 to 32 by 2, 35 to 60 by 5
IPSCL07
5.00000
5.50000
4.85000
10 to 32 by 2, 35 to 65 by 5
IPSCL08
6.00000
6.55000
5.85000
12 to 32 by 2, 35 to 75 by 5
IPSCL09
8.00000
8.65000
7.80000
16 to 32 by 2, 35 to 100 by 5, 120
Spring-Type Straight Pins, Slotted
ISO Pins
42 - 37
Generic Part Name: IPSSS

Notes:

Name
Nominal
Size
Pin
Dia
Pin Int
Dia
Length
IPSSS01
1.0000
1.3000
0.8000
4, 5, 6 to 20 by 2
IPSSS02
1.5000
1.8000
1.1000
4, 5, 6 to 20 by 2
IPSSS03
2.0000
2.4000
1.5000
4, 5, 6 to 30 by 2
IPSSS04
2.5000
2.9000
1.8000
4, 5, 6 to 30 by 2
IPSSS05
3.0000
3.5000
2.1000
4, 5, 6 to 32 by 2, 35, 40
IPSSS06
3.5000
4.0000
2.3000
4, 5, 6 to 32 by 2, 35, 40
IPSSS07
4.0000
4.6000
2.8000
4, 5, 6 to 32 by 2,
35 to 50 by 5
IPSSS08
4.5000
5.1000
2.9000
5, 6 to 32 by 2, 35 to 50 by 5
IPSSS09
5.0000
5.6000
3.4000
5, 6 to 32 by 2, 35 to 80 by 5
IPSSS10
6.0000
6.7000
4.0000
10 to 32 by 2, 35 to 100 by 5
IPSSS11
8.0000
8.8000
5.5000
10 to 32 by 2, 35 to 100 by 5,
120
IPSSS12
10.0000
10.8000
6.5000
10 to 32 by 2, 35 to 95 by 5,
100 to 160 by 20
IPSSS13
12.0000
12.8000
7.5000
10 to 32 by 2, 35 to 95 by 5,
100 to 180 by 20
IPSSS14
13.0000
13.8000
8.5000
10 to 32 by 2, 35 to 95 by 5,
100 to 180 by 20
IPSSS15
14.0000
14.8000
8.5000
10 to 32 by 2, 35 to 95 by 5,
100 to 200 by 20
IPSSS16
16.0000
16.8000
10.5000
10 to 32 by 2, 35 to 95 by 5,
100 to 200 by 20
IPSSS17
18.0000
18.9000
11.5000
10 to 32 by 2, 35 to 95 by 5,
100 to 200 by 20
IPSSS18
20.0000
20.9000
12.5000
10 to 32 by 2, 35 to 95 by 5,
100 to 200 by 20
42 - 38
Nominal
Size
Pin
Dia
Pin Int
Dia
Length
IPSSS19
21.0000
21.9000
13.5000
14 to 32 by 2, 35 to 95 by 5,
100 to 200 by 20
IPSSS20
25.0000
25.9000
15.5000
14 to 32 by 2, 35 to 95 by 5,
100 to 200 by 20
IPSSS21
28.0000
28.9000
17.5000
14 to 32 by 2, 35 to 95 by 5,
100 to 200 by 20
IPSSS22
30.0000
30.9000
18.5000
14 to 32 by 2, 35 to 95 by 5,
100 to 200 by 20
IPSSS23
32.0000
32.9000
20.5000
20 to 32 by 2, 35 to 95 by 5,
100 to 200 by 20
IPSSS24
35.0000
35.9000
21.5000
20 to 32 by 2, 35 to 95 by 5,
100 to 200 by 20
IPSSS25
38.0000
38.9000
23.5000
20 to 32 by 2, 35 to 95 by 5,
100 to 200 by 20
IPSSS26
40.0000
40.9000
25.5000
20 to 32 by 2, 35 to 95 by 5,
100 to 200 by 20
IPSSS27
45.0000
45.9000
28.5000
20 to 32 by 2, 35 to 95 by 5,
100 to 200 by 20
IPSSS28
50.0000
50.9000
31.5000
20 to 32 by 2, 35 to 95 by 5,
100 to 200 by 20
ISO Pins
42 - 39
ISO Pins
Name
42 - 40
Index
Index - i
Index - ii
Book title
cover.doc (Book title: BASIC LIBRARY Catalog) ii

cover.doc (Book title: with UDF Library) ii
cover.doc (Book title: BASIC LIBRARY Catalog) iv
cover.doc (Book title: with UDF Library) iv
cover.doc (Book title: BASIC LIBRARY Catalog) vi
cover.doc (Book title: with UDF Library) vi
cover.doc (Book title: BASIC LIBRARY Catalog) viii
cover.doc (Book title: with UDF Library) viii
cover.doc (Book title: BASIC LIBRARY Catalog) x
cover.doc (Book title: with UDF Library) x
cover.doc (Book title: BASIC LIBRARY Catalog) xii
cover.doc (Book title: with UDF Library) xii
cover.doc (Book title: BASIC LIBRARY Catalog) xiv
cover.doc (Book title: with UDF Library) xiv
cover.doc (Book title: BASIC LIBRARY Catalog) xvi
cover.doc (Book title: with UDF Library) xvi
cover.doc (Book title: BASIC LIBRARY Catalog) xviii
cover.doc (Book title: with UDF Library) xviii
cover.doc (Book title: BASIC LIBRARY Catalog) ii
cover.doc (Book title: with UDF Library) ii
cover.doc (Book title: BASIC LIBRARY Catalog) vi
cover.doc (Book title: with UDF Library) vi
cover.doc (Book title: BASIC LIBRARY Catalog) 1-2
cover.doc (Book title: with UDF Library) 1-2














Creo Basic Udf

Uploaded by

Creo Basic Udf

Uploaded by

Pro/ENGINEER

BASIC LIBRARY Catalog

Parametric Technology Corporation

1997 PARAMETRIC TECHNOLOGY CORPORATION. ALL RIGHTS

1997 Parametric Technology Corporation. Unpublishedall rights reserved under the

Order Number U0021

About This Guide

Section 1: Features Library

Chapter 2: Design Features

Standard Design Features....................................................................................... 2-2

Chapter 3: Tube Forming Features

Chapter 4: Molding Features

Chapter 5: Sheet Metal Design Features

Section 2: ANSI Inch Series Parts Library

Chapter 7: ANSI Inch Keys

Square Parallel Key .................................................................................................

BASIC LIBRARY Catalog with UDF Library

Square Plain Tapered Key.......................................................................................

Chapter 8: ANSI Inch Large Rivets

Button Head Rivet....................................................................................................

Chapter 9: ANSI Inch Lock Washers

Regular Helical Spring Lock Washer .......................................................................

Chapter 10: ANSI Inch Machine Screws and Nuts

Slotted 100 Degree Flat Countersunk Head..........................................................

Plain Regular Hex Head ........................................................................................ 10-8

Chapter 11: ANSI Inch Plain Washers

Plain Washer (Preferred Sizes) ............................................................................. 11-2

BASIC LIBRARY Catalog with UDF Library

Generic part name: WB................................................................................... 11-4

Chapter 12: ANSI Inch Round Head Bolts

Countersunk and Slotted Countersunk Bolts......................................................... 12-2

Chapter 14: ANSI Inch Small Solid Rivets

Flat Head Rivet ...................................................................................................... 14-2

BASIC LIBRARY Catalog with UDF Library

Generic part name: RNN............................................................................... 14-14

Hex Socket Head Cap Screw ................................................................................ 15-2

Heavy Hex Structural Bolt...................................................................................... 16-1

Chapter 17: ANSI Inch Square and Hex Nuts

Hex Nut.................................................................................................................. 17-2

Generic part name: HJN................................................................................. 17-4

Chapter 18: ANSI Inch T-Bolts and T-Nuts

Chapter 19: ANSI Inch Tapping Screws

Type B Slotted Pan Head Tapping Screw .............................................................

BASIC LIBRARY Catalog with UDF Library

Generic part name: TSEE ............................................................................... 19-7

Chapter 20: ANSI Inch Woodruff Keys

Full Radius Type, Small Series..............................................................................

Section 3: ANSI Metric Series Part Library

Spline Wrenched Bolts .......................................................................................... 21-1

Generic Part Name: MASB .............................................................................

Chapter 22: ANSI Metric Hex Nuts

Hex Nuts, Style 1 ...................................................................................................

Chapter 23: ANSI Metric Hex Cap Screws

Hex Cap Screws .................................................................................................... 23-2

BASIC LIBRARY Catalog with UDF Library

Generic Part Name: MHHF ........................................................................... 23-15

Chapter 24: ANSI Metric Machine Screws

Slotted Flat Countersunk Head.............................................................................. 24-2

Chapter 25: ANSI Metric Retaining Rings

Basic External, Series 3AM1 ................................................................................. 25-2

Chapter 26: ANSI Metric Rivets

Small Solid Flat Head Rivets .................................................................................

Generic Part Name: MSTR ............................................................................. 26-7

Chapter 27: ANSI Metric Round Head Bolts

Chapter 28: ANSI Metric Socket Head Screws

Socket Head Cap Screws...................................................................................... 28-2

Chapter 29: ANSI Metric T-Bolts and T-Nuts

Chapter 30: ANSI Metric Tapping Screws

BASIC LIBRARY Catalog with UDF Library

Slotted Pan Head................................................................................................... 30-8

Chapter 31: ANSI Metric Washers

Metric Plain Washers............................................................................................. 31-2

Section 4: ISO Fasteners and Standard Parts

Hex Head Bolts, Grades A & B.............................................................................. 32-2

Chapter 33: ISO Square Neck Bolts

Cup Head Square Neck Bolts, Grade C, Large Head ...........................................