Scribd
Upload
122 views20 pages

Vlsi/Fpga Design and Test CAD Tool Flow in Mentor Graphics

This document describes Mentor Graphics CAD tool flows for VLSI/FPGA design and test. It outlines tool suites for IC, SoC, FPGA, and PCB design. It then details the specific CAD tool options available at Auburn University, including digital simulation, mixed-signal simulation, synthesis, physical design, and design-for-test tools. Application examples are provided for behavioral modeling and verification, simulation, synthesis, and physical implementation on FPGAs and ASICs.

Uploaded by

altisin
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
122 views20 pages

Vlsi/Fpga Design and Test CAD Tool Flow in Mentor Graphics

This document describes Mentor Graphics CAD tool flows for VLSI/FPGA design and test. It outlines tool suites for IC, SoC, FPGA, and PCB design. It then details the specific CAD tool options available at Auburn University, including digital simulation, mixed-signal simulation, synthesis, physical design, and design-for-test tools. Application examples are provided for behavioral modeling and verification, simulation, synthesis, and physical implementation on FPGAs and ASICs.

Uploaded by

altisin
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
Download as pdf or txt
You are on page 1/ 20

VLSI/FPGA Design and Test CAD Tool Flow in Mentor Graphics

Victor P. Nelson

or. Nightmare on CAD Tool Street

Mentor Graphics CAD Tool Suites


IC/SoC design flow DFT design flow FPGA design flow PCB design flow HDL digital modeling & simulation Analog/mixed-signal modeling & simulation ASIC/FPGA synthesis Vendor-provided (Xilinx,Altera,etc.) back end tools

(select eda Electronic Design Automation)

Auburn user-setup Options

ICFlow2004.3 (2001, 2005.1)


ICFlow tools (Design Architect-IC, IC Station, Calibre) Simulation tools (Modelsim, ADVance MS, Eldo) Synthesis (Leonardo) DFT tools (DFT Advisor, Flextest, Fastscan) Limited access to Quicksim II (some technologies)

EN2002u3 (EN2001)

Design Architect, Quicksim II,Quicksim Pro (Front End) ModelSim & Leonardo (Simulation/Synthesis) Xilinx/Altera tools (Back End)

FPGA (FPGA Advantage, Modelsim, Leonardo)

FPGA Design Flow


Behavioral Design Mentor Graphics Front-End Tools (Technology-Independent) Synthesis Gate-Level Schematic EDIF Netlist Xilinx/Altera/Other Back-End Tools (Technology-Specific) Map, Place & Route Verify Timing Verify Function Verify Function

FPGA Configuration File

IC/ASIC Design Flow


Behavioral Design Verify Function

DFT/BIST & ATPG

Gate-Level Netlist

Verify Function

Transistor-Level Netlist

Verify Function & Timing

DRC & LVS Verification

Physical Layout

Verify Timing

Mask Data

Technology files (all) & standard cell libraries (exc. tsmc018)


ami12, ami05 (AMI 1.2um, 0.5um) tsmc035, tsmc025, tsmc018 (TSMC 0.35um, 0.25um, 0.18um)

Mentor Graphics ASIC Design Kit 3.0

Support for IC Flow & DFT tools:


Synthesis (LeonardoSpectrum) Schematic capture (Design Architect-IC) Design for test & ATPG (DFT Advisor, Flextest/Fastscan) Simulation Modelsim/ADVance MS: VHDL/Verilog/Mixed-Signal models Eldo/Accusim analog (SPICE) models Mach TA post-layout timing Quicksim II, Quicksim Pro (except tsmc025,tsmc018) IC layout & verification (standard cell & custom) IC Station Calibre, SST Velocity

Behavioral Design & Verification


(mostly technology-independent)
Create Behavioral/RTL HDL Model(s) VHDL Verilog SystemC VHDL-AMS Verilog-A

ModelSim

(digital)

Simulate to Verify Functionality

ADVance MS

(analog/mixed signal)

(digital)

Leonardo Spectrum

Synthesize Gate-Level Circuit Technology Libraries Technology-Specific Netlist to Back-End Tools

Digital HDL Simulation


VHDL,Verilog Models Working Library Design_1 Design_2 VITAL IEEE 1164 Resource Libraries

Simulation Setup

ModelSim

Input Stimuli

Result Waveforms

Result Listing

Mixed-Signal HDL Simulation


VHDL,Verilog, VHDL-AMS, Verilog-A, SPICE Models Working Library Design_1 Design_2 VITAL IEEE 1164 Resource Libraries

Simulation Setup

ADVance MS

Input Stimuli

Eldo, Eldo RF Analog (SPICE) Mach TA

EZwave or Xelga View Results

ModelSim Digital (VHDL,Verilog)

ADVance MS Simulation System

ADVance MS kernel supports:


Invoke stand-alone or from Design Architect-IC Mentor Graphics Legacy Simulators (PCB design)
Quicksim II, Quicksim Pro (digital) ASIC: adk_quicksim FPGA/PLD: Xilinx: pld_quicksim, Altera: max2_quicksim Accusim (analog): adk_accusim

VHDL & Verilog: digital (via ModelSim) VHDL-AMS & Verilog-A: analog/mixed signal Eldo/SPICE: analog (via Eldo) Eldo RF/SPICE: analog RF (via Eldo RF) Mach TA/SPICE: high-speed analog/timing

Automated Synthesis
HDL Behavioral/RTL Models Technology Synthesis Libraries FPGA ASIC TechnologySpecific Netlist VHDL, Verilog, SDF, EDIF, XNF Leonardo Spectrum (Level 3) Design Constraints

Level 1 FPGA Level 2 FPGA + Timing

Leonardo ASIC Synthesis Flow

Synthesis Example

Load technology library: tsmc035 (ASIC), or Xilinx Spartan2 (FPGA) Load design file: seqckt.vhd Specify constraints: clock freq, delays, etc. Optimization: effort, performance vs. area Write synthesized netlist output(s):
seqckt_0.vhd : VHDL netlist for ModelSim & DFT seqckt.v : Verilog netlist for import into DA-IC seqckt.sdf : For ModelSim to study timing seqckt.edf : EDIF netlist for 3rd party tools seqckt.xnf : Xilinx netlist for Xilinx ISE

Mentor Graphics DFT Design Flow

Memory & Logic BIST

Boundary Scan

Internal Scan Design

ATPG

ASIC DFT Flow


Synthesized VHDL/Verilog Netlist ATPG Library DFT Advisor VHDL/Verilog Netlist With Scan Elements Fastscan/ Flextest Generate/Verify Test Vectors Insert Internal Scan Circuitry

adk.atpg

Test Pattern File

Physical Design - FPGA


Component-Level Netlist

Xilinx ISE Altera Max Plus 2

Map to FPGA LUTs, FFs, IOBs FPGA/PLD Technology Files

User-Specified Constraints

Place & Route

Generate Programming Data Configuration File

Generate Timing Model Simulation Model

Physical Design ASIC (Std. Cell)


Component-Level Netlist Std. Cell Layouts Floorplan Chip/Block

Mentor Graphics IC Station

Process Data Design Rules

Place & Route Std. Cells

Design Rule Check

Generate Mask Data IC Mask Data

Backannotate Schematic

Layout vs. Schematic Check

Mach TA/Eldo Simulation Model

Design Architect-IC Design Flow

Preparation for Layout

Convert Verilog netlist to Mentor Graphics EDDM netlist format


Invoke Design Architect-IC (adk_daic) Import Verilog feature to create schematic
mapping file $ADK/technology/adk_map.vmp

Open the generated schematic Prepare design viewpoints for layout

May also create schematic diagrams for handdesigned circuits gate and/or transistor level
Components from ADK library

You might also like