0% found this document useful (0 votes)
428 views2 pages

Flash Distillation Problem

A 50 mole% hexane and 50 mole% octane feed is flashed, with 50% of the feed vaporizing. Using equilibrium data and flash calculations, the compositions of the vapor and liquid products are determined to be 69% hexane in the vapor and 31% hexane in the liquid.

Uploaded by

prudhvifire
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
Download as docx, pdf, or txt
0% found this document useful (0 votes)
428 views2 pages

Flash Distillation Problem

A 50 mole% hexane and 50 mole% octane feed is flashed, with 50% of the feed vaporizing. Using equilibrium data and flash calculations, the compositions of the vapor and liquid products are determined to be 69% hexane in the vapor and 31% hexane in the liquid.

Uploaded by

prudhvifire
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1/ 2

A feed of 50 mole % hexane and 50 mole % octane is fed into a pipe still through a pressure reducing valve and

then into a flash disengaging chamber. The vapor and liquid leaving the chamber are assumed to be in equilibrium. If the fraction of the feed converted to the vapor is 0.5, find the compositions of the top and bottom products. The following table gives the equilibrium data for this system.
Mole fractions of hexane in liquid x Mole fractions of hexane in vapor y 1.00 1.00 0.69 0.932 0.40 0.78 0.192 0.538 0.045 0.1775 0.00 0.00

Calculations: Basis: 100 mole of feed F = 100 mol zF = 0.5 D = 100 x 0.5 = 50 mol W = F - D = 50 mol Slope of the operating line = -W/D = -1 With these data, the equilibrium curve and operating line for flash distillation are plotted as follows:

From the plot, it could be seen that the operating line cuts the equilibrium curve at the point (0.31, 0.69). That is yD = 0.69 and xW = 0.31 Composition of top product = yD = 69% Hexane Composition of bottom product = xW = 31% Hexane

You might also like