Scribd
Upload
90 views5 pages

Cold Form Strut Design

This document provides technical specifications and calculations for the design of a structural section including: 1. Geometric properties and material properties of the section are defined. 2. Calculations are shown for stress limits, moment capacity, shear capacity, and buckling resistance. 3. Deflection and utilization are calculated. 4. Plate design calculations include total shear force, forces on the plate, moment due to shear, plate moment capacity, and a combined check. 5. The section is determined to be adequate based on the calculations.

Uploaded by

ikanyu79
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
90 views5 pages

Cold Form Strut Design

This document provides technical specifications and calculations for the design of a structural section including: 1. Geometric properties and material properties of the section are defined. 2. Calculations are shown for stress limits, moment capacity, shear capacity, and buckling resistance. 3. Deflection and utilization are calculated. 4. Plate design calculations include total shear force, forces on the plate, moment due to shear, plate moment capacity, and a combined check. 5. The section is determined to be adequate based on the calculations.

Uploaded by

ikanyu79
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
Download as pdf or txt
You are on page 1/ 5

SectionProperties PostSpacing, PostHeight, ApplieddeadLoad, AppliedLiveLoad, LimitingUtilization DesignParameter DeadLoadFactor LiveLoadFactor Modulusofelasticity LimitingDeflection SectionProperties SectionDepth SectionThickness MassperMeter

AreaofSection SecondMomentofArea,x SecondMomentofArea,y RadiusofGyrationx RadiusofGyrationy ElasticModulusx ElasticModulusy PlasticModulusx PlasticModulusy TorsionalConstant MaterialYieldStrength DesignStrength Opening ConnectionDesign PlateThickness AverageBoltSpacingtotheBasePlate LoadCalculation UltimateLoad MajorMomentx MinUltimateMajorMomentx MaxUltimateMajorMomentx MinorMomenty MinUltimateMinorMomenty MaxUltimateMinorMomenty UltimateShear UltimateAxialForces

x = L = wd = wl = U =

3000 mm 3000 mm 2 0 kN/mm


2 0.2 kN/mm 0.9

g = p = E =

1.4 1.6 205000 N/mm 300


2

Dw t u A Ixx,Iyy

= = = = =

75 3 6.81 841 716000

mm mm kg 2 mm mm4

Ixx,Iyy = rx = rx = Zxx = Zyy = Sxx = Syy = J = Ys = py = do =

4 716000 mm

29.2 mm 29.2 mm 3 19100 mm 3 19100 mm


3 22500 mm 3 22500 mm

3120000 mm 2 275 N/mm 2 275 N/mm 12 mm

tc = Sb =

10 mm 50 mm

Wu = Mu,x,min = Mu,x = Mu,y,min = Mu,y = Fv = Fc =

0.96 0 kN.m 1.08 kN.m 0 kN.m 0 kN.m 1.44 kN 0.280586 kN

1.CalculatelimitingStress,P0 CompressiveStress LimitingStress 2.MomentCapacity MomentCapacity 3.ShearCapacity ShearStrenght

p0 =

298.0358

p0 = Min(p0,py) = 275 Mc,x&y = 5.2525 kN.m

pv = D = qcr = pvDt = qcrDt =

165 kN 63 mm 2 2267.574 N/mm 62.37 kN 428.5714 kN

Pv = min(PvDt,qcrDt) = 62.37 kN 4.LateralBucklingMoment = b = b = LT = PE = LT Pb Mb = = = = 102.7397 0 0 0 0 137.5 0.065479 0 5.2525 kN.m

Note:AccordingtoBS59501:2000cl4.3.6.1,BucklingresistancemomentSHS,M b,shs=Mc

5.MemberinCompression MinimumelasticFlexuralBucklingloang CalculatePerryCoefficient,

PE = LE/r = =

160962.3 N 102.7397 0.165479 231275 N 209436.6 127.9679 kN

ShortStrutCapacity

Pcs = = Pc =

CombinedBendingandShear (Fv/Pv)2 = (M/Mc) (Fv/Pv) +(M/Mc) CombinedBendingandCompression


2 2 2

0.000533 0.274155 0.274688

= =

Fc/Pcs = Mx/Mcx = My/Mcy = Fc/Pcs+Mx/Mcx+My/Mcy = RatioofSmallerMomentxtoLargerMomentx ,x = Cb,x = RatioofSmallerMomentxtoLargerMomentx ,y = Cb,y = OverallBucklingCheck Fc/Pc = Mx/(CbxMcx(1Fc/Pex) = My/(CbyMcy(1Fc/Pey) = Fc/Pc+Mx/(CbxMcx(1Fc/Pex)+My/(CbyMcy(1Fc/Pey) = DeflectionCheck Height/LimitingHeight = Deflection, = Utilization =

0.001213 0.205616 0 0.20683 0 1.75 0 1.75

0.002193 0.1177 0 0.119893

10 mm 6.898079 mm 0.689808

OverallUtilization PlateDesign TotalShearForce ForcesononesideofPlate PlateHeight MomentduetotheShearForce PlateMc PlateShearCapacity CombineCheck

U =

0.689808

Fv = Fo = H = Mv = Mcp = Fvc = (Fv/Fvc)2+(Mv/Mcp)2 = SectionisAdequate

1.44 kN 0.72 kN 75 0.036 kN 2.578125 kN 123.75 0.00033

5.2.2.2

5.4.3

6.2.3

You might also like