Scribd
Upload
287 views3 pages

Company Name Weld Procedure Specification

This document outlines the welding procedure specification for a project. It specifies details such as the welding process, joint type, material specifications, edge preparation, welding progression, consumables, and welding parameters. The WPS provides information on preheat temperatures, interpass temperatures, welding sequences, and qualifications required. It aims to ensure the welding is performed according to code and meets project specifications.

Uploaded by

Jorge Valdera
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
Download as xls, pdf, or txt
287 views3 pages

Company Name Weld Procedure Specification

This document outlines the welding procedure specification for a project. It specifies details such as the welding process, joint type, material specifications, edge preparation, welding progression, consumables, and welding parameters. The WPS provides information on preheat temperatures, interpass temperatures, welding sequences, and qualifications required. It aims to ensure the welding is performed according to code and meets project specifications.

Uploaded by

Jorge Valdera
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
Download as xls, pdf, or txt
Download as xls, pdf, or txt
You are on page 1/ 3

WELDING PROCEDURE

SPECIFICATION (WPS)

COMPANY NAME

RECORD (PQR)

Weld Procedure Specification

WELDER QUALIFICATION (WQR)

PROJECT:

PROJECT No:

QUALIFICATION NOTES:

PROJECT SPECIFICATION:

CONTRACT No:

WELDING CODE:

CONSTRUCTION CODE:

N/A

JOINT TYPE:

WELDING PROCESS:

EDGE PREPARATION:

TYPE (AUTO,MANUAL,SEMI-AUTO):

INTER PASS CLEANING:

WELDING PROGRESSION:

N/A

BACKING:

WELDING POSITION:

N/A

BACKING MATERIAL TYPE:

SEMI-AUTO

MODE OF TRANSFER:

POWER SOURCE:

JOINT DESIGN

WELDING:

ROOT OPENING:

MACHINE/GUN:

ROOT FACE:

N/A
N/A
N/A

GROOVE ANGLE:
WELD JOINT PREPARATION DETAILS

WELDING SEQUENCE/POSITION

MATERIAL SPECIFICATION
MATERIAL TYPE:

Austenitic Cr-Ni
8 mm
N/A
DIAMETER (OD):
6 mm to 12 mm
RANGE QUAL:
304L
GRADE:
GROUP:

P No.:

THICKNESS:

THERMAL TREATMENT
PREHEAT C:
MAX INTERPASS C:
P.W.H.T.:
WELD JOINT TOLERANCES

WELD SEQUENCE NOTES

HEAT RATE:

If the separation is 1.5mm or greater the fillet

HOLD TEMP:

size shall be increased by that amount.

UNCONTROLLED:

WELD PASS DETAILS


NO.

SIDE

POS.

ELECTRODE DESCRIPTION
DIR

TYPE

SIZE

SPEC.

FLUX
OR GAS

F No.

PREHEAT
INTERPASS
TEMP. C

NOTES:

HEAT
INPUT
KJ/mm

No
N/A
N/A
N/A

CONTROLLED C:
HOLD (MIN/HR):
COOL RATE:

WELDING
PARAMETERS/CURRENT

TIME LAPSE
MAX

AMPS

VOLTS POL

PREPARED BY:
TITLE:
TESTING REQUIRED
REPORT No:

TEST PLATE IDENTIFICATION

CONSUMABLES/DETAILS

MARKED:

CONTACT TUBE TO WORK DISTANCE:

WELDER:

SHIELDING GAS:

WELDER ID:

STRING OR WEAVE BEAD:

COUPON DIMENSIONS:

BACK PURGE RATE:

COUPON UNIQUE ID:

ELECTRODE TYPE:

LOCATION:
DATE WELDED:
SUPERVISED BY:

ELECTRODE SIZE:

N/A
N/A

CONSUMABLE
TREATMENT:
CONSUMABLE STORAGE:
FLOW RATE:

COMPNAY APPROVAL
APPROVED BY:

MGL-F-253 Rev 2 Draft

CLIENT APPROVAL

N/A
N/A
N/A

FLUX:
NOTES/STAMP

APPROVED BY:

Page 1 of 3

SPEED

DATE:

DATE:

COMPANY NAME
CONTINUED WELDING PROCEDURE SPECIFICATION
WELD PASS DETAILS
NO.

SIDE

POS.

ELECTRODE DESCRIPTION
DIR

TYPE

MGL-F-253 Rev 2 Draft

SIZE

SPEC.

F No.

FLUX
OR GAS

PREHEAT
INTERPASS
TEMP. C

HEAT
INPUT
KJ/mm

TIME LAPSE
MAX

WELDING
PARAMETERS/CURRENT
AMPS VOLTS POL SPEED

Page 2 of 3

MGL-F-253 Rev 2 Draft

Page 3 of 3

You might also like