Pressure Vessel- Maintenance, Inspection,

Rating, Repair and Alternation

An intensive one week course with daily homework and a final exam (similar to the
API 510 exam); special emphasis on the use of related codes & calculations.
A study guide is issued to direct participants pre-class study.

. Trainings . Workshops . Empowering . Excellence . Quality . Teamwork .

HRD Approved Class A Training Provider (since Year 2002). Registered with Ministry of Finance

 Only a minimal fee for our participants who attend as REFRESHER COURSE

Prepare Yourself To Be A ...

Certified API 510 Inspector!

Grab valuable knowledge on Pressure Vessel- Maintenance,
Inspection, Rating, Repair and Alternation
This course is produced by MSTS
Inspection Training Services in
Oklahoma, U.S.
MSTS is a company specializing in providing the
needed practical training for petrochemical and
industrial plant pressure equipment inspectors and
engineers.
MSTS courses are specifically designed to help
pressure equipment personnel improve their
technical knowledge and skills.
MSTS instructors are selected for their technical
and wake-ability skills. (Wake-ability the ability
to minimize snores during long, boring technical
training.) MSTS students generally have a 80%
passing rate.

Course Objectives :

The course provides participants

knowledge necessary to:

]
with

Successfully pass the API 510 pressure

vessel inspector certification exam

Effectively use major codes: ASME B&PV

the

Potential for :

Designed for pressure equipment inspectors and

engineers working in refineries, chemical & industrial
plants, gas plants, pipeline terminals, and oil fields.

Inspection / Mechanical Engineer

Asset Integrity Engineer
Material & Corrosion Engineer
DOSH Officer
Welding Inspector
Project Engineer
QA /QC / NDT Engineer
Quality / Safety Coordinator
Static Engineer, Technician

No required class pre-requisites. However, students

who wish to sit for the API exam should have 3
years of experience at a petro-, chemical- or
industrial facility and have at least 1 year of
inspection experience.
These classes and exams are not easy, so only
individuals who are serious about their pressure
equipment career should participate.
More info about API Exam at [Link]/icp

BONUS !!!

Sections V, VIII, & IX

Perform all basic vessel calculations needed

for the API exam (e.g. tmin, test pressure,
MAWP, static head, MDMT, corrosion rates,
remaining life, etc.)

Use APIs requirements during inspection,

repairs, and alterations of pressure vessels

Review welding procedures (WPS/PQR) and

welder performance qualifications (WPQ)

IDC Training House Sdn Bhd

No 7, Unit 8, Jalan Industri PBP3, Taman Industri Pusat
Bandar Puchong, 47100 Puchong, Selangor, Malaysia.

Colour tabs, checklists & training passes are provided.

+603-80615126 / 8720

info@[Link]

+603-8068 7720

[Link]

.course outline
1) Welcome & Introduction
2) ASME B&PV Section VIII Vessel Fabrication Code:
Learn how to successfully use this Code:
Purpose of the Code
Scope of the Code
Organization of the Code
Qualification requirements specified by the Code
Roles specified by the Code
Key terms discussed in the Code
Tips on how to find needed information in the Code

1) Review Homework from Day 4

DAY
1

3) API 510 Sections 1-4

Purpose or API 510
Scope of API 510
Responsibilities defined in API 510
Tips on how to memorize important information from API 510
Evening Session: Section VIII Homework
Use the Code to answer typical questions found in the API exam.
1) Review Homework from Day 1
2) ASME B&PV VIII Key Concepts.
Vessel MAWP
Vessel Part MAWP
Stresses Longitudinal and Circumferential
Types of Joints, Weld Joint Categories
Amount of RT Full or Spot
RT Factors

2) ASME B&PV Section IX - Welding Code

DAY
Purpose of the Code
Roles of the Inspector
5
Organization of the Code
Welding Positions Test and Field
Testing Requirements and Acceptance Criteria
Welder Qualification Process and Restrictions
Weld Procedure Qualification Process and Restrictions
3) Review and Evaluate a WPQ (Welder Performance Qualification)
4) Review and Evaluate a WPS (Welding Procedure Specification)
and the associated PQR (Procedure Qualification Record)
Evening Session: Section IX Homework
Open and Closed book Quiz, evaluate 2 WPQs, and 1 WPS/PQR

1) Review Homework from Day 5

DAY
2

2) API 510 Section 7

Repairs & Alterations Requirements
PWHT Alternatives
Inspector & Engineer Roles
Re-rating Requirements

3) ASME B&PV VIII Calculations & Charts

Learn how to successfully determine the following:
Static Head Pressure
Vessel MAWP
Joint Efficiency
Minimum Thickness for a Cylindrical Shell

3) ASME B&PV Section V NDE

Purpose of the Code
Organization of the Code
RT Techniques
Purpose & Selection of IQIs
RT Film Density Requirements
Key terms discussed in the Code
Tips on how to find needed information in the Code

Evening Session: Section VIII Homework

Practice all Calculations covered in class.

Evening Session: Section V Homework

Open and Closed book Quiz, API 510 Quiz

1) Review homework from Day 2

1) Review Homework from Day 6

2) ASME B&PV VIII Key Concepts.

Pressure Testing cautions & requirements
The significant of a brittle fracture

DAY
3

3) ASME B&PV VIII Calculations & Charts

Learn how to successfully determine the following:
Minimum Thickness for a Formed Head
Minimum Thickness for a Flat Head
Vessel Part MAWP for Shell and Formed Heads
Hydrotest Test Pressure
Pneumatic Test Pressure
Vessel MDMT
Acceptance criteria for Impact Tests
Maximum Allowable External Pressure for a Shell

2) API 576 Relief Devices

Types of Relief Devices
Purpose & operation of Balanced Bellows Relief Devices
Purpose & operation of Pilot Operatored Relief Devices
Tips on how to study this document

DAY
6

DAY
7

3) API 572 Inspection of Vessels

Tips on how to study this document
4) Chap 2 Conditions causing Deterioration
Tips on how to study this document
5) Practice Exam Exam is similar to the API 510 exam

Evening Session: Section VIII Homework

Practice all Calculations covered in class.
1) Review homework from Day 3
2) ASME B&PV VIII Key Concepts.
Fillet weld terms
Principles of nozzle reinforcement
3) ASME B&PV VIII - Calculations & Charts
Learn how to successfully determine the following:
Minimum size of nozzle fillet welds
Nozzle reinforcement
4) API 510 Sections 5-6
Corrosion Mechanisms
Fitness for Service Evaluations
Inspection Types and Requirements, Inspection Intervals
Pressure Testing Requirements
Inspection of Relief Devices
Evening Session: Section VIII Homework
Practice all Calculations covered in class.

DAY
4

Course Duration: 7 Days Training

Daily Schedule:
8:30am - 5:30pm (Workshop)
6:00pm - 7:30pm (Evening session -Optional)
No of Pax: Max 24 participants / class
(to ensure optimal effectiveness of the Training)
Bring to Class: Students should bring along the required
Codes / Standards (in hardcopy) for API Exam,
Calculator, Lots of Questions, and a CAN-DO Attitude.
*Stationeries such as pen, highlighter are provided.

IDC Training House Sdn Bhd No 7, Unit 8, Jalan Industri PBP3, Taman Industri Pusat Bandar Puchong, 47100 Puchong, Selangor, Malaysia.
Tel: +603- 8061 5126 / 8061 8720 / 8060 8720 / 8060 7720 Fax: +603- 8068 7720 Email: info@[Link] URL: [Link]

Trainers Profile

Lutz Seibt

Lutz Seibt has more than 20

years hands-on experience
as an Authorized Inspector
and Auditor acc. to German
Pressure

Vessel

Special Skills:-

(AD

- Pressure vessels, Steam boilers, Piping Systems

Merkblaetter), Boiler (TRD)

- Cranes, Hoisting equipment, Hoisting equipment

and Storage Tanks Codes,

Pressure

Equipment

Directive

(PED),

Transportable Pressure Equipment Directive

Inspector for periodical inspection & certification of

of lifeboats

Inspector for third party & welding inspection and

(TPED) and European Construction Material

QA/QC in manufacturing/ construction of

Directive; 9 years out of it within TUVs

- Pressure vessels, Steam boilers, Piping Systems

International Business Unit in Asia Pacific.

He has given training sessions on Pressure
Equipments and German Pressure Vessel
Standards

for

instance

in

Malaysia,

Singapore, Korea and China. The recent

trainings he has conducted include:-

Educational / Technical Qualifications: Certified

International
Welding
Engineers
(International Institute of Welding - IIW, Germany)
API 577 Welding Inspector

European Pressure Equipment Directive

Certified Pedestal Crane Inspector acc. to API RP 2D

(Cranetech Training & Inspection, Inc., USA)

API 510 Certification Preparation

Certified API 510 Pressure Vessel Inspector

Pressure Vessel Inspection

API 570 Certification Preparation

In-Service Piping

ASME IX Welding Qualifications Code

Simplified

ASME VIII Division 1 Pressure Vessel

Code Simplified

IDC Welding Inspector (Stage 1 -

Certified API 570 Piping Inspector

Certified Safety Engineer (Fachhochschule Frankfurt,
Germany)
Environmental
Auditor
Esslingen, Germany)

(Technical

Academy

Bachelor Degree Motor Vehicle Engineering

, 2005)

Foundation of Welding Technology)

IDC Welding Inspector (Stage 2 Advanced Level)

IDC Training House Sdn Bhd No 7, Unit 8, Jalan Industri PBP3, Taman Industri Pusat Bandar Puchong, 47100 Puchong, Selangor, Malaysia.
Tel: +603- 8061 5126 / 8061 8720 / 8060 8720 / 8060 7720 Fax: +603- 8068 7720 Email: info@[Link] URL: [Link]

Trainers Profile

Lutz Seibt

Testimonials
It was an excellent program conducted by a very experienced tutor.
The discussion topics were directly related to my work scope and
responsibilities & helpful and recommended this course to any
inspection personnel.
E. Kannan
Discipline Head, Inspection Execution, Sarawak Shell Bhd
Dear Mark:
We conducted API 510 training course from 21 July to 29 July by
inviting Lutz Seibt in Malaysia. The course was attended by 23
applicants and the results of the questionnaires were excellent. I really
appreciative your recommendation for great lecturer and hope you to
give us your useful consultation for a long time to come.
Eung-Ho, Kim
Manager, Education Planning Team
Korean Gas Safety Corporation, Korea
As always the course has been conducted to an excellent standard
and the learning very much tuned to actual work environments. Very
much recommended to all levels of the engineering community.
Pg Hassanal ASBPHM Puteh
Utilities Plant Inspector, Brunei LNG Sdn Bhd

What I like most about the Training is the SIMPLIFICATION.

[Link]
Managing Director, PT. Atmindo (Indonesia)

Before I attend this Training, my knowledge about the pressure

vessel code is very poor. Now, I am self-motivated to know more
about ASME, quite interesting.
Adi Setiawan
Engineer, PT. Atmindo (Indonesia)

The course was conducted successfully and I believe it helps me in

having a better understanding of ASME IX "Welding Qualification" and
efficiency in reviewing my day to day job.
Ir Mohd Rosli Salim
Inspector Engineer, Petronas Penapisan (Melaka)

IDC Training House Sdn Bhd No 7, Unit 8, Jalan Industri PBP3, Taman Industri Pusat Bandar Puchong, 47100 Puchong, Selangor, Malaysia.
Tel: +603- 8061 5126 / 8061 8720 / 8060 8720 / 8060 7720 Fax: +603- 8068 7720 Email: info@[Link] URL: [Link]

REGISTER NOW!

API 510 Certification Preparation

Training

Fax : +60 3 8068 7720

Tel : +60 3 8061 5126 / 8720
+60 3 8060 8720 / 7720
Email: info@[Link]

25 Nov - 01 Dec 2013

Time : 8.30am - 5.30pm
IDC Training House, Puchong, Selangor, Malaysia
DELEGATES

COURSE FEES

1 Name
: ____________________________________
Designation : ____________________________________
Email
: ____________________________________
Mobile

: ____________________________________

2 Name
: ____________________________________
Designation : ____________________________________
Email
Mobile

: ____________________________________
: ____________________________________

RM 6,000 per delegate

RM 5,800 Registration with payment before 25/10/2013
RM 5,600 3 delegates or more
The fee does not include any taxes (withholding or otherwise). In case of
any taxes applicable, the client has to ensure that the taxes are paid on top
of the investment fee paid for the course. Compliance with the local tax
laws is the responsibility of the client.

* Save up to 50% for In-house Trainings (subject to courses)

For Enquiries, please contact info@[Link]

3 Name
: ____________________________________
Designation : ____________________________________
Email
Mobile

EXAM FEE (Optional)

RM 200 - Admin Fee
USD 800 - Non-Member
USD 600 - Member

: ____________________________________
: ____________________________________

CONTACT PERSON (HR/Training Department)

2013 EXAM DATE: API 510

1 Name
: ____________________________________
Designation : ____________________________________
Department : ____________________________________
Email
Tel No.

: ____________________________________
: ____________________________________

2 Name
: ____________________________________
Designation : ____________________________________
Department : ____________________________________
Email
Tel No.

: ____________________________________
: ____________________________________

INVOICE to be sent to: *This columns are mandatory

Name

: ____________________________________

Designation : ____________________________________
Department : ____________________________________
Email
Tel No.

: ____________________________________
: ____________________________________

Fax No.

: ____________________________________

Company Name : _________________________________

Address
: ____________________________________
________________________________________________

FOR OFFICE USE:

Jun 5 (Deadline to IDC: Feb 27, to API USA: Mar 20)

Sep 25 (Deadline to IDC: Jun 19, to API USA: July 10)
Dec 4 (Deadline to IDC: Aug 28, to API USA: Sep 18)
General Information
1. Closing date for registration: 11 Nov 2013
2. Fees: Include Course Materials, Meals, Certificate
and Photo
3. Meals: Vegetarian meal upon request
4. Attire: Smart Casual
5. Accommodation: Please provide us the Check-In &
Check-Out Date for hotel bookings. Payment by pax
account. Click here for Hotel List.
6. Course Confirmation: Will be sent via email
7. Map to Training Venue: Please download from
[Link]
8. For more information on API, visit:
[Link]

Items To Bring

REQUIRED CODES & STANDARDS

Lots of Questions & a CAN-DO attitude
Stationeries will be provided

Disclaimer
IDC reserves the right to make alternative arrangement to the Course
Contents, Date, Trainer, Venue or Fee if the needs arise due to
unforeseen circumstances.

PAYMENT DETAILS

Registration Status:

All payments must be received prior to the event date.

PENDING INFO
RECEIVED/COMPLETE
INVOICE ISSUED
Invoice Date:

(HRDF/PSMB Claimable)

Bank Transfer
Account Holder: IDC Training House Sdn Bhd
Account No: 091-201-200378-6
Swift No: ARBK MYKL
Invoice No:

Name of Bank: AmBank (M) Berhad

Bank Address: G01 Block A, Menara PJ, No. 18, Jalan
Persiaran Barat, 46050 Petaling Jaya, Selangor, Malaysia

IDC Training House Sdn Bhd (594752-M)

No. 7, Unit 8,Jalan Industri PBP 3, Taman Industri Pusat Bandar Puchong, 47100 Puchong, Selangor, Malaysia