Scribd
Upload
192 views

Using OptiFlash IH2

The document provides instructions for flashing firmware onto a device using OptiFlash software. It describes dragging and dropping firmware files, checking and unchecking options related to checking code binaries, erasing memory regions, and communication speeds. The final step is to click the flash button to begin the flashing process.

Uploaded by

aarayan
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
192 views

Using OptiFlash IH2

The document provides instructions for flashing firmware onto a device using OptiFlash software. It describes dragging and dropping firmware files, checking and unchecking options related to checking code binaries, erasing memory regions, and communication speeds. The final step is to click the flash button to begin the flashing process.

Uploaded by

aarayan
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 11

S/W R&D Group – Europe

www.TSAR3000.com
Select platform to (NOX) USB

Check the Version IH2


2/11

www.TSAR3000.com
Drag & Drop the .sre or .s3 file

3/11

www.TSAR3000.com
Drag & Drop the .csc file

4/11

www.TSAR3000.com
Check code binary and CSC Binary
(Recommand)

5/11

www.TSAR3000.com
1. Check the CSC Binary Only

2. Uncheck the File System Format


3. Check code binary and CSC Binary

6/11

www.TSAR3000.com
Must uncheck this box
If checked this box maybe it’ll occur problem.
(ex : no boot, delete some data, download fail etc)

7/11

www.TSAR3000.com
The COM port is used to transfer the flash
loader to the phone.
you can select the maximum transfer
speed OptiFlash will use to communicate
with the phone. However, OptiFlash will
use a slower speed if either the PC’s or the
phone’s serial hardware is incapable of
handling the selected speed.

8/11

www.TSAR3000.com
Check Erase all unused regions
When this option is enabled, all regions in memory
that are not overwritten by the contents of the SRE
file to be loaded, and are not listed as reserved
regions, are erased (i.e. filled with 0xff).
If Unchecked this box maybe it’ll occur problem.
(ex : no boot, delete some data, download fail etc)

MUST
CHECK

9/11

www.TSAR3000.com
Click the flash
button

10/11

www.TSAR3000.com
11/11

www.TSAR3000.com

You might also like