ZTE Join Air Help

Copyright © 2009 by ZTE Corporation

All rights reserved.

No part of this publication may be excerpted, reproduced, translated or

utilized in any form or by any means, electronic or mechanical, including
photocopying and microfilm, without the prior written permission of ZTE
Corporation.

The manual is published by ZTE Corporation. We reserve the right to make

modifications on print errors or update specifications without prior notice.

Edition 1st edition, Jun 2009

 Contents

1 Introduction....................................................................................................................................3
1.1 Introduction.........................................................................................................................3
1.2 Warning and Notice.............................................................................................................3
1.2.1 To the owner ..........................................................................................................3
1.2.2 Device ....................................................................................................................3
1.2.3 In Aircraft................................................................................................................3
1.3 Applicability Scope .............................................................................................................4
1.4 System requirements ...........................................................................................................4
1.5 Functions.............................................................................................................................4
2 Installation......................................................................................................................................4
2.1 Installing Software ..............................................................................................................4
2.2 Running Application Software ............................................................................................4
2.3 Uninstalling Software..........................................................................................................5
3 Functions & Operation...................................................................................................................5
3.1 Interface Introduction..........................................................................................................5
3.1.1 Functional Button..................................................................................................5
3.1.2 The uses of Tray Icons ........................................................................................5
3.2 Internet ................................................................................................................................5
3.2.1 Connecting to Internet .........................................................................................5
3.2.2 Disconnecting to Internet.....................................................................................6
3.2.3 Data Record ..........................................................................................................6
3.3 SMS.....................................................................................................................................6
3.3.1 Reading SMS ........................................................................................................6
3.3.2 Creating a new SMS ............................................................................................6
3.3.3 SMS Interface Operating Guide .........................................................................7
3.4 PhoneBook ..........................................................................................................................7
3.4.1 Creating a new record .........................................................................................7
3.4.2 Searching Records...............................................................................................7
3.4.3 PhoneBook Interface Operating Guide .............................................................7
3.5 Settings................................................................................................................................8
3.5.1 Connection ............................................................................................................8
3.5.2 Selection ................................................................................................................8
3.5.3 Preference .............................................................................................................9
3.5.4 SMS Settings.........................................................................................................9
3.5.5 Sound .....................................................................................................................9
3.5.6 Security ..................................................................................................................9
3.5.7 System ...................................................................................................................9
3.5.8 Update Settings ..................................................................................................10
3.6 Help...................................................................................................................................10
4. FAQ & Answers ..........................................................................................................................10
 1 Introduction

1.1 Introduction
Thank you for using the ZTE Join Air.
To guarantee the device always in its best condition, please read this manual
carefully and keep it for further use. The pictures, symbols and contents in this manual are
just for your reference. They might not be completely identical with your device. We
operate a policy of continuous development. We reserve the right to update the technical
specifications in this document at any time without prior notice.
The ZTE Join Air is a multi-mode 3G device, working in HSPA+/ HSPA/ WCDMA/ EDGE/
GPRS/ GSM networks. The ZTE Join Air integrates the functionality of a mobile phone
(SMS), and combines mobile communication with Internet perfectly. It supports data, and
SMS services through the mobile phone network, enabling you to communicate anytime
and anywhere.

1.2 Warning and Notice

1.2.1 To the owner

Some electronic devices are susceptible to electromagnetic interference sent by
device if inadequately shielded, such as electronic system of vehicles. Please consult the
manufacturer of the device before using the device if necessary.
Be aware of the usage limitation when using this device at places such as oil
warehouses or chemical factories, where there are explosive gases or explosive products
being processed. Therefore, turn off your device if required.
Don’t touch the inner antenna area if not necessary. Otherwise it will affect your
device’s performance. Store the device out of the reach of little children. The device may
cause injury if used as a toy.

1.2.2 Device
Please use original accessories or accessories that are authorized. Using any
unauthorized accessories may affect your device’s performance, and violate related
national regulations about telecom terminals.
　 Avoid using the device near metallic structure device or establishment that can emit
electromagnet wave. Otherwise it may influence receiving signals. The device is
non-waterproof type, please keep it dry and store in shady and cool place.
Don’t use the device immediately after a sudden temperature change. In such case, it
will produce dew inside and outside the device, so don’t use it until it becomes dry. Take
the device carefully.
Don’t lose, bend or cause it struck. Otherwise it will lead to destruct damage.
No dismantling by non-professional and only qualified maintainer can undertake
repair work.

1.2.3 In Aircraft
Please power off the device before the airplane takes off. In order to protect airplane’s
communication system from interference, it is never allowed to use the device when it is in
flight.
Using it before the plane taking off should get aircrew’s permission according to
safety regulations.

1.3 Applicability Scope

ZTE Join Air supports the present mainstream types of laptops and desktop PCs,
such as HP, IBM, Toshiba, Lenovo, Dell, Founder, etc.

1.4 System requirements

Operating System Windows XP

Configuration CPU Pentium III or above

Hard disk 50M or above

Memory 128M or above

The performance of the device may be influenced if configuration below

recommended requirement.

1.5 Functions
Functions: SMS, data service, Phone Book service, applied management, support
microSD card etc.

2 Installation

2.1 Installing Software

1. Double click the install file(for example:install.exe).
2. After a few seconds, the system start software installation automatically.
3. Choose the setup language. And you can select a different location by pressing icon,
and then click the Next button.
4. The system shows the installation progress. Wait a minute and program installation is
complete.
Note: If you have problems with installation after the above operation, please contact the
service provider for help.

2.2 Running Application Software

1. After the device is correctly connected, the application software launches
automatically.
2. Otherwise, click the“Start→Programs”, find the UI software program group，and
then click the name of the UI software to run the application software. Or double click the
shortcut icon of the UI software to run the application software.
After device initialized, the standby icon appears in the taskbar, the device can work
properly.

2.3 Uninstalling Software

1. Close the application program, stop the microSD card (if you are using a microSD
card), and unplug your device.
2. Click Start→Control Panel”, find the UI software program group，and then click the
Uninstall menu.
3. Click the Next button to uninstall.
Note: The system prompts to unplug your device.
4. The system shows the uninstall progress. Wait a minute and program uninstall is
complete.

3 Functions & Operation

3.1 Interface Introduction

3.1.1 Functional Button

There will be various functional button icons shown in the main interface. Select
different functional button to carry out corresponding operation.
Connect: Connect to Internet.
SMS: Send SMS or read SMS.
Phonebook: Save and view the information of contacts.
Settings: Set normal relative information for the application software.
Help: View the help information.

3.1.2 The uses of Tray Icons

Right click the tray icon to popup the operation menu:
Log: The records of software operation.
Diagnostics: View the hardware information, operational information and network
information.
Help: Enter the Join Air software help.
Exit: Close the software.

3.2 Internet

3.2.1 Connecting to Internet

You can browse web pages after you have accessed to Internet with the help of Join
Air, you can also receive SMS when surfing in the Internet.
1. Click network icon, and then the system will research the available network
automatically.
2. When connected, the icon will change to another icon, then you can access
internet and receive email etc through network.
3.2.2 Disconnecting to Internet
Click cancel icon in the main interface to disconnect internet.

3.2.3 Data Record

Click icon and choose Data record to switch to the Data record interface. You can
view related information for your internet operation, such as Transfer Data, and Data
record. The Transfer Data includes transfer time, transfer rate, data stream and statistics
information. The Data record includes start time, end time, duration, upload and
download.
The graph on the right part of the Transfer Data interface shows you the upload
speed and download speed in real time.
Click the Reset button to reset all of data record; Click the Cancel button at the right
bottom corner of the interface to turn back to the main interface.

3.3 SMS
Click icon to witch to the SMS interface. You can select the location of saving SMS
(PC or (U)SIM card ), and execute different operations in the Inbox, Sentbox, Draftbox,
Important, Deleted and Report. Click Inbox, Sentbox, Draftbox, Important, Deleted, and
Report to view the SMS list.
Note: To make sure that the SMS can be used properly, at first, you should setup the
correct SMS center number.
Inbox: Save the received messages.
Sentbox: Save the successfully sent messages, or the failed sent messages.
Draftbox: Save the editing messages which haven’t been sent.
According to the requirement, there may be three boxes below:
Important: Save the important messages.
Deleted: Save the deleted messages.
Report: Save the message reports.

3.3.1 Reading SMS

Click the Inbox button, select a new message, and then the content of new message
will be shown in content area below the SMS list area.

3.3.2 Creating a new SMS

1. Click the New button, input the recipient’s number.
The recipient’s number can be input directly or by entering the phonebook to select
one/more records. The recipient’s amount can be one or more. Please use “;” to separate
recipients.
2. Input content, and then click the Send button. The prompt screen will appear on
the interface, click the OK button, and then the edited short messages will be sent. SMS
text can not exceed 160 individual English characters (including English symbols).
After sending successfully, the SMS will be saved into Sentbox automatically. If the
sending operation fails, failure notification will appear, and the message will be saved in
the Sentbox. If network supports, you can send SMS when surf on the Internet. Click icon
button, enter the SMS interface and send SMS in a normal way.

3.3.3 SMS Interface Operating Guide

There will be various functional button icons shown in the SMS interface. Select the
different functional buttons to carry out corresponding operation.
New: Create a new message.
Reply: Reply short message to the sender. (Execute this item in Inbox)
Forward: Edit the content and then forward the short message to other recipients.
(Execute this item in Inbox)
Save Num: Save the sender number obtained from the message to phonebook.
Move: Move the selected SMS from PC to (U)SIM or from (U)SIM to PC (Execute this
item in Inbox, Sentbox)
Delete: Delete selected short message(s). 　
If you delete the short messages stored in Deleted or Report, then the delete
operation will delete the messages for ever, and if you delete the short messages stored
in other boxes, the delete operation will move the selected messages to the Deleted.

3.4 PhoneBook
Click PhoneBook icon to switch to the PhoneBook interface. The phonebook
information can be saved in PC or (U)SIM card, and you can choose the saved position. A
record saved in PC includes Name, MobilePhone, HomePhone, OfficePhone, Email1,
Email2 and Group. If saved in (U)SIM card, the record may include Name, MobilePhone,
HomePhone and Email1, which depends on the capability of saving records in (U)SIM
card.
The capability of saving records and the number of current saving records in PC or
(U)SIM card are shown at the left top corner of the interface.

3.4.1 Creating a new record

1. Click the New button below the contact list area.
2. Choose the saving location of a new record (In option: PC or (U)SIM card.)
3. Input the content.
4. Click the OK button to finish adding a new record.

3.4.2 Searching Records

1. Enter the search conditions in the search condition blank.
You can key in total or any part of the record characters or phone number you are
searching for.
2. Click the Search button to begin searching.
3. The corresponding records or names’ information are listed, scroll the record you
want to view in details.

3.4.3 PhoneBook Interface Operating Guide

There will be various functional button icons shown in the PhoneBook interface.
Select a different functional button and it will carry out corresponding operation.
 View: View the selected records for detail information.
New: Add a new record.
Delete: Delete the selected records.
Move: Move the selected records to the different groups or (U)SIM card.
Edit: Edit the information of the selected record.

3.5 Settings
Click Settings icon to switch to the settings interface. It includes: Connection,
Selection, Preference, SMS settings, Sound, Security, System.
Click close icon to turn back to the main interface at the right top of the interface.

3.5.1 Connection
To ensure that the device can connect the Internet properly, you should configure the
connection information firstly.
Button description
Add: Add a new configuration file.
View/Edit: View/Edit the selected configuration file.
Delete: Delete the selected configuration file.
Apply: Choose one of configuration files to be a default file.
Adding a new configuration file
Click the Add button to add a new configuration file to the system. According to the
requirement, there may be two modes for adding a new config : Add RAS Config and
Add NDIS Config .
Add RAS Config
It includes: Config name, Dial number, APN, User name, Password, DNS, PDP
server, Authentication Mode, PDP Type. If network supports “Obtain xx address
automatically”, the device can obtain the assigned xx address automatically. If network
does not support it, you should input the proper address manually. Please consult the
network supplier of (U)SIM card for all above information. The configuration information
may be various according to the different network suppliers and network types.
Add NDIS Config（if have）
It includes: Config name , APN, IP Address , User name, Password, Preferred DNS,
Alternate DNS , Preferred NBNS , Alternate NBNS , Authentication. If network supports
“Obtain xx address automatically”, the device can obtain the assigned xx address
automatically. If network does not support it, you should input the proper address manually.
Please consult the network supplier of (U)SIM card for all above information. The
configuration information may be various according to the different network suppliers and
network types.

3.5.2 Selection
1. Automatic: The system selects the network automatically according to user’s
configuration rules and network status. Select network “Automatic”. The system will find
the network available automatically.
 2. Manual: User selects network in a manual way. Select network “Manual”, click the
Search button to research the network. Wait a moment and the supplier list will show in
the windows and which with the available status can be selected. Select a proper network
to connect. Select the network that the supplier is utilized to serve your (U)SIM and press
the Apply button to enter the network.

3.5.3 Preference
1. Automatic: The system selects the available network automatically.
2. UMTS/HSPA Only: The system will only select the UMTS/HSPA network.
3. GPRS/EDGE Only: The system will only select the GPRS/EDGE network.

3.5.4 SMS Settings

1. SMS center number: Set the corresponding SMS center number. You must input
the correct SMS center number to use the SMS properly and the number will be provided
by the network provider.
2. SMS validity: Set the time limit for saving SMS in the network side. (This function
needs network supports.) In option: 12 hours, A day, A week, or the longest period. The
default setting is the longest period permitted by the network.
3. Default save location of received SMS: Select “PC” to save in laptop or desktop
PC; select “(U)SIM card” to save in (U)SIM card.
4. State report: When Enable item is selected, the network will inform you of the
status for the sent messages.

3.5.5 Sound
You can set Network connect alert, Network disconnect alert, and SMS alert by
yourself. The audio file supports MP3、WAV、WMA and MIDI format. Click the Browse
button to replace the default audio file. These alerts sound on the PC side. If you select
“Mute”, you can not hear corresponding alert.

3.5.6 Security
You can enable the PIN Code verification by select PIN Enable.
When Enable item is selected, you will be asked to enter PIN code to use the device.
Click the Change button to modify the PIN Code. Enter the old PIN code and a new
PIN code, click the OK button to save.
Note: This function needs network support.

3.5.7 System
1. Startup
If “Auto start when the device is available” item is selected, the OS will detect and
recognize the device and run the UI automatically.
2. Auto connect
If “Auto Connect” item is selected, when the software is started, the software will
connect the internet automatically.
3.5.8 Update Settings
1.Online update
Check automatically every two weeks: The software will automatically check and
update every two weeks.
Disable checking automatically: The software will disable the automatic update
feature.
2.Server
　 URL: Set the URL.
　 port: Set the port.
3.Update now
Click the Update now button, the system will automatically search the new version
information. If find it, the system will popup the new version’s description information. Click
the Next button to continue.

3.6 Help
Click help icon application interface to popup the operation menu:
Log: The records of software operation.
Diagnostics: View the hardware information, operational information and network
information.
Help: Enter the Join Air software help.
Exit: Close software.

4. FAQ & Answers

If you meet problems in service, please refer to the following answers for guidance.
If the problems persist, please contact your supplier via the contact detail in your operator
user guide.

Problem Possible Causes Problem Solving

Description
The system can The system configuration The device will appear as a
not run the is having difficulty with virtual disc in ‘My Computer’ on
installation the auto-run software. the PC’s start menu. Click on the
program icon and start the Install.exe. If
automatically you have previously installed a
version of the program, please
uninstall it first.
After installation, The system configuration Please install the driver program
the system is having difficulty with manually. The driver program
doesn't install the the auto-run software. can be found in the installation
driver program folder, usually you can open
properly. C:\Program Files, find and open
the folder of the UI software, and
then you can find the “drivers”
folder.
After the device The system configuration Please run the UI program
is plugged in, the is incorrect. manually. First click the “Start
UI program → Programs”, find the UI
doesn't run software program group, and
automatically. then click the name of the UI
software or an alias icon on the
desktop.
1. You are in the place 1. Change location to find a good
where there is no HSPA+ place where has signal.
/ HSPA / WCDMA/ EDGE
/GPRS /GSM network
coverage. Such places
include underground
parking garages, tunnels,
and some remote rural
After restarting
areas.
the computer,
2. The device is not 2. Close the device safely as
there is no signal
properly connected. usual, pull out the device and
indicated.
reinsert the device again.
3. The SIM/USIM card 3. Remove and reinsert the
isn't inserted properly. SIM/USIM card correctly.
4. The device is 4. Adjust the angle / position of
positioned in such a way the device or its proximity to
as that adversely affects other electronic devices.
the devices signal
reception.
 1. The installation 1. Run the installation program
programs of the device first, then connect the
When the Device have not been installed device. Now install the drivers
is being installed, properly. as normal in Windows.
the computer 2. The device is not 2. Restart the computer, or
cannot find it. connected properly. reconnect the device.
3. The SIM/USIM card is 3. Reinsert the SIM/USIM card
not inserted properly. correctly.
1. The SMS center 1. Your device is preconfigured
number is incorrect. so it is unlikely that it will need
changing. However if it is missing
Sent Message
or incorrect contact your
failure.
operator.
2. The network is busy or 2. Try later or move to an area
you are in an area with with a stronger signal.
no signal.
1. You are in the place 1. Move to an area with good
where there is no HSPA+ signal.
/ HSPA/ WCDMA/ EDGE
/ GPRS/ GSM network
coverage.
2. The network is busy. 2. Try later.
3. The APN in the user 3. Check the APN in the user
Date connection configuration file is configuration file in the "Network
failed. incorrect. settings".
4. The device data is 4. Local network access or the
corrupted. target server maybe
experiencing problems. Retry
data request.
5. The network type has 5. Reselect the network type
been selected manually, according to the type of the
but is incorrect. SIM/USIM card.
Connected to the 1. After connection, you 1. Check that the APN in the
Internet, but it are unable to open web configuration files is correct.
cannot open any pages.
website page. 2. IE browser is causing 2. Upgrade to the new version or
problems. reinstall the IE browser.
3. Your operating system 3. Use the professional anti-virus
maybe infected by a software to check and remove
virus. Worm Blaster for the virus.
example can affect
upload and downloaded
data flow, resulting in an
inability to access a
website.
4. You have connected to 4. This happens when you are
an APN which cannot changing any preset operator
connect to the Internet. value in the setting section.
Check the entry and enter the
correct APN from your operator.