AC97 e HD Audio Conector
AC97 e HD Audio Conector
Support Home
Download Center
Contact Support
Desktop Boards
Front panel audio header pinouts
The analog front panel header design lets OEMs and integrators place audio
functionality on the front panel of a PC system via a cabled up front panel dongle.
This document describes the header pinout configuration for connecting chassis
with Intel® High Definition Audio or AC'97 audio cable up.
Analog Port 1
1 PORT 1L - left channel 2 GND Ground
(Microphone)
Active low
signal that
signals BIOS
that an Intel®
HD Audio
dongle is
Analog Port 1
connected to
3 PORT 1R - right channel 4 PRESENCE#
the analog
(Microphone)
header.
PRESENCE# =
0 when an
Intel® HD
Audio dongle is
connected
Jack detection
sense line
from the
Intel® HD
7 SENSE_SEND 8 KEY No pin
Audio CODEC
jack detection
resistor
network
Front panel
microphone input
signal (biased Ground used by
1 MIC 2 AUD_GND
when supporting analog
stereo
microphone)
Microphone
power / additional Ground used by
3 MIC_BIAS MIC input for 4 AUD_GND analog audio
stereo microphone circuits
support
Right channel
Right channel
audio signal
audio signal to
return from front
5 FP_OUT_R front panel 6 FP_RETURN_R
panel (when
(headphone drive
headphones
capable)
unplugged)
http://www.intel.com/support/motherboards/desktop/sb/cs-015851.htm 15/04/2011
Desktop Boards — Front panel audio header pinouts Page 2 of 2
Filtered +5 V used
7 AUD_5V by analog audio 8 KEY No pin
circuits
Additional resources:
*Trademarks
©Intel Corporation
http://www.intel.com/support/motherboards/desktop/sb/cs-015851.htm 15/04/2011