Aeg Motors

High Efficiency
TECHNICAL CATALOGUE
2011
www.lafert.com
three-phase LV Motors
CONTENTS
General information
Product range
Standards and regulations
10
Conditions of installation
14
Mechanical design
16
Electrical design
25
Order data
31
THREE-PHASE MO TO RS
33
Terminal boxes
34
Connection diagrams
36
[ I]
[ T]
Three-phase cage motors driven

by frequency converter
38
Spare parts
39
Type designation
40
Electrical Data
41
Dimensions
54
[1]
Indice
[ TI ]]
General information
[23]
[3]
General information - Technical Catalogue 1031/11
[ I]
PRODUC T RA NG E
Lafert Group product range

In the next few pages we offer a detailed overview of our manufacturing program of AC
induction motors.
The main scope of our core business is the development of dedicated solutions that
improves our Customers product design, thereby giving our customers a competitive
advantage. The core business of our Company stands on the ability to adapt and engineer
our standard Product design to any specific market demand.
Lafert's range of products is divided in five product sectors:
ENERGY EFFICIENT Motors, high efficiency motors, IE2 code

in the range 56 to 315, IE3 code in the range 90 to 160
CUSTOMISED Motors, special and customised motors,

brake motors and single-phase motors
HIGH PERFORMANCE Motors, high performance,

permanent magnet motors and generators as well as the
relevant drives
SERVO Motors & Drives, brushless servomotors and drives

for industrial automation
LIFT Motors, synchronous gearless machines with

permanent magnet rotor for elevators
PRODUCT RANGE
[ I]
ENERGYEFFICIENT MOTORs
High Efficiency Three-phase Motors
Motors conforming to the higher efficiency standards for Europe, North America and
Australia.
For Europe, Lafert offers its AMHE and AMPE range of AC induction motors, whose
efficiency values are conforming to IE2 and IE3 requirements according to IEC 6003430;2008.
Lafert motors for the North American market comprise the AMH and AMPH range. These
machines meet the higher efficiency demands of the USAs Department of Energys Energy
Policy Act (EPAct) and are conforming to EISA (Energy Indipendence and Security Act) that
imposes strict levels of minimum efficiency. It is illegal to import Motors into the USA and
Canada that do not comply with this standard.
IE2
IE3
In addition to EPAct requirements, these motors are a recognised component verified by

Underwriters Laboratories and carry the UL approved logo.
The standard design includes the following basic features to give a high level of flexibility:
Multi Mount Construction for an easy change of terminal box position
Terminal box rotates by 90 to allow cable entry from any direction
Easy-to-change flanges with over-sized and smaller-sized dimensions
Provision for oil seal at Drive End
[4]
[5]
[ I]
PRODUC T RA NG E
CUSTOMISED MOTORS
Dedicated and customised executions
Lafert specialises in customised solutions for non-standard motor applications. We are
considered as a market leader in this field and have built a reputation for excellence for this
core activity over the past 45 years.
The range of specials includes both electrical and mechanical variants:
Extended stainless steel motor shafts for the fan industry
Motors for pumping applications
Complete Tailor made designs
Customised flange and shaft for gear motors
Electrical design to meet specific duty requests
Specific wound motors for worldwide electrical supply
Motor design to meet special environmental requests (Smoke and heat exhaust
ventilation, Dust Ignition for Zone 22, Non Sparking Exn)
Brake Motors
Laferts brake motors (3 and single phase) are engineered to give safety, versatility and long
service life. The motors mechanical design is specific for brake motors in order to avoid any
risk of failure.
The three brake options available with AC or DC brake coil can fit any application.
The AMBY and AMBZ ranges have a very strong design and may meet any heavy duty
application. The AMBY range is also available with low noise brake, specific for theatres.
The compact AMS range is the ideal solution for woodworking equipment manufacturers,
packaging machines manufacturers, as well as small crane manufacturers.
As well as meeting industry specific safety requirements, the motors are also failsafe
machines: a combination that ensures maximum machine safety.
PRODUCT RANGE
[ I]
HIGH PERFORMANCE MOTORS

High Performance Motors with permanent magnet rotor
A differentiator with Sensorless Permanent Magnet Motors is the premium high efficiency
level and the compact design. The efficiency level normally stands over 90% all along the
motors speed range.
This Product must be driven by a frequency converter, that can also be on-board as an
integral drive.
Major applications are the Pump and Fan Industry, Textile Machinery Manufacturers,
Gearbox Manufacturers, Traction Systems for microcars and scooters; this Product can be
produced as a Generator for Wind Energy.
A separate catalogue is available.
[6]
[7]
[ I]
PRODUC T RA NG E
SERVO MOTORS & DRIVES

Brushless Servo Motors
Among the few independent manufacturers of Servo Motors in the market, Lafert can
supply a wide range of standard and tailor made products for Industrial Automation.
The whole manufacturing process is integrated within Lafert manufacturing facilities, giving
an excellent flexibility to specific market demands, as well as a high level of cost-efficiency.
Brushless Standard Motors
Direct Drive Motors
Low Inertia Motors
Compact Motors
Servo Drives
Our products are manufactured according to the criterion of adaptability and flexibility. This
ensures an easy and fast set-up, by means of the most advanced hardware and software
technologies.
Every device always ensures the highest reliability and safety, because it is subject to strict
tests in different load and climatic conditions.
PRODUCT RANGE
[ I]
LIFT MOTORs
Gearless Machines for Elevators
The LIFT range allows the manufacturing of systems where the traction machine is inside the
elevator shaft, so there is no need for a machine room, with obvious space and cost savings
and a more rational layout of the all components.
LIFT is permanent-magnet gearless synchronous machine with torque up to 660 Nm for
systems up to 1,275 kg.
The compact and heavy-duty motor comes with the following features:
Very small dimensions
High Efficiency
High comfort
No maintenance
Low noise level
Our Strengths:
Customer Designs
Exact Engineering
In Partnership
with the Customer
[8]
[9]
[ I]
sta nda rds a nd regul ati ons
The strictness of our quality

control assures the flawless
operation and reliability of our
products.
That our quality scale fulfils your
demands is confirmed by the
certificate awarded by the CERMET,
a Certification body authorized by
ACCREDIA.
CE Marking
Our motors comply with the requirements of the following international standard:
IEC 60034
as well as with the following European Directives: Low Voltage Directive 2006/95/EC, the
EMC-Directive 2004/108/EC and Directive on the restriction of the use of certain hazardous
substances in electrical and electronic equipment (RoHS) 2002/95/EC.
The above named products comply with the requirements of the EC Directive Machines
2006/42/EC. In accordance with this Directive induction motors are components and
intended solely for integration into other machines.
Commissioning is forbidden until conformity of the end product with this Directive is
proved!
The
IE1
IE2
IE3
symbol was applied for the first time in 1995.
The safety instructions in the Operation Manual of the manufacturer and EN

60204-1 have to be observed.
Harmonized efficiencies to IEC 60034-30;2008 - IE1, IE2 and IE3 code.
Efficiency testing method IEC 60034-2-1;2007
All standard three-phase motors with standard rating included in this catalogue comply
with efficiency class IE1 and bear the corresponding label on the rating plate.
For efficiency at 50%, 75% and full load, please refer to the electrical data tables.
sta ndards and regulati ons
[ I]
New International Efficiency Levels for Motors: IE Codes

The International standard IEC 60034-30;2008 states the new efficiency levels IE1, IE2 and
IE3 for electric motors, ensuring an international common base for motor designing and
classification, as well as for national legislative activities.
The efficiency measurement method for motors has also been reviewed.
The new standard IEC 60034-2-1;2007 provides for test conditions and efficiency
measurement methods which are more accurate and replaces the previous standard EN
60034-2;1996.
By comparing results from the same motor, the efficiency levels measured according to the
new test method are lower than those with the old method.
The efficiency levels provided for by the standard for single speed, three-phase brake
motors included -50 Hz or 50/60 Hz, motors with rated output between 0,75 kW and 375
kW, 2, 4 or 6 poles, on the basis of continuous duty operation S1 or intermittent periodic
duty operation S3 are the following:
IE1 = Standard Efficiency
IE2 = High Efficiency
IE3 = Premium Efficiency
However, IEC 60034-30 states only the requirements for the efficiency levels, thus creating
shared measures worldwide. It does not state the motors to be supplied or the minimum
efficiency level. This depends on any regional laws that are applicable.
EUROPE EcoDesign EuP directive (2005/32/EC)
The EcoDesign EuP directive (2005/32/CE) states the ecodesign requirements for energyusing products.
It is the Commission Regulation (EC) 640/2009 that specifies the efficiency requirements for
electric motors and that introduces in all countries of the European Community the
obligation of the IE2 minimum efficiency level as from 16th June 2011.
At further dates, progressively higher minimum efficiency requirements will be established.
The IE3 level will come in from 2015-2017.
The scope of the Commission Regulation includes single speed, three-phase 50 Hz or 50/60
Hz, squirrel cage asynchronous motors with rated output between 0.75 kW and 375 kW,
2, 4 or 6 poles, on the basis of continuous duty operation S1.
Motors to be exclusively exported out of the EU (machine distributors or manufacturers)
may be produced and distributed with IE1 efficiency level even after 16th June 2011.
To that end, a statement will have to be made to the manufacturer.
[10]
[11]
[ I]
sta nda rds a nd regul ati ons
UNITED STATES, CANADA EISA Energy Independence and Security Act, 2007
The Energy Independence and Security Act, 2007 (EISA) imposes in the USA and Canada
Nema Premium Efficiency (IE3) as minimum level of efficiency as from 19th December
2010.
EISA, which replaces the current 1992 Energy Policy Act (EPAct) legislation, sets out new
efficiency restrictive limits for a wide range of three-phase motors, including brake motors
with power ratings from 1 to 500 HP.
Efficiency values according to IEC 60034-30;2008

Efficiency standard calculation: IEC 60034-2-1;2007

IE1 code
Output
Standard Efficiency
kW 2 poles 4 poles 6 poles

0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
160
200
250
315
355
375
72.1
75.0
77.2
79.7
81.5
83.1
84.7
86.0
87.6
88.7
89.3
89.9
90.7
91.2
91.7
92.1
92.7
93.0
93.3
93.5
93.7
94.0
94.0
94.0
94.0
94.0
72.1
75.0
77.2
79.7
81.5
83.1
84.7
86.0
87.6
88.7
89.3
89.9
90.7
91.2
91.7
92.1
92.7
93.0
93.3
93.5
93.8
94.0
94.0
94.0
94.0
94.0
70.0
72.9
75.2
77.7
79.7
81.4
83.1
84.7
86.4
87.7
88.6
89.2
90.2
90.8
91.4
91.9
92.6
92.9
93.3
93.5
93.8
94.0
94.0
94.0
94.0
94.0
IE2 code
High Efficiency
2 poles 4 poles 6 poles
77.4
79.6
81.3
83.2
84.6
85.8
87.0
88.1
89.4
90.3
90.9
91.3
92.0
92.5
92.9
93.2
93.8
94.1
94.3
94.6
94.8
95.0
95.0
95.0
95.0
95.0
79.6
81.4
82.8
84.3
85.5
86.6
87.7
88.7
89.8
90.6
91.2
91.6
92.3
92.7
93.1
93.5
94.0
94.2
94.5
94.7
94.9
95.1
95.1
95.1
95.1
95.1
75.9
78.1
79.8
81.8
83.3
84.6
86.0
87.2
88.7
89.7
90.4
90.9
91.7
92.2
92.7
93.1
93.7
94.0
94.3
94.6
94.8
95.0
95.0
95.0
95.0
95.0
IE3 code
Premium Efficiency
2 poles 4 poles 6 poles
80.7
82.7
84.2
85.9
87.1
88.1
89.2
90.1
91.2
91.9
92.4
92.7
93.3
93.7
94.0
94.3
94.7
95.0
95.2
95.4
95.6
95.8
95.8
95.8
95.8
95.8
82.5
84.1
85.3
86.7
87.7
88.6
89.6
90.4
91.4
92.1
92.6
93.0
93.6
93.9
94.2
94.6
95.0
95.2
95.4
95.6
95.8
96.0
96.0
96.0
96.0
96.0
78.9
81.0
82.5
84.3
85.6
86.8
88.0
89.1
90.3
91.2
91.7
92.2
92.9
93.3
93.7
94.1
94.6
94.9
95.1
95.4
95.6
95.8
95.8
95.8
95.8
95.8
sta ndards and regulati ons
[ I]
The motors comply with the relevant standards and regulations, especially:
Ttle

IEC
EU
CENELEC
D
DIN/VDE
I
CEI/UNEL
GB
BS
F
NFC
E
UNE
Electrical
General stipulations
60034-1 EN 60034-1 DIN EN 60034-1 CEI EN 60034-1 4999-1 51-200
for electrical machines
4999-69 51-111
Rotating electrical machines: 60034-2 HD 53 2
DIN EN 60034-2 CEI EN 60034-2 4999-34 51-112
methods for determining losses
and efficiency using tests
Standard method for determing 60034-2-1
losses and efficiency from tests
Efficiency classes of single
60034-30
speed, three-phase, cageinduction motors (IE-code)
Terminal markings and
60034-8 HD 53 8 S4 DIN VDE 0530-8 CEI EN 60034-8 4999-3 51-118
direction of rotation of
rotating electrical machines
Starting performance
60034-12 EN 60034-12 DIN EN 60034-12 CEI EN 60034-12 4999-112
Standard voltages
60038
HD 472 S1 DIN IEC 60038
CEI 8-6
Insulating materials
60085
DIN IEC 60085
CEI EN 60085
UNE EN 60034-1
UNE EN 60034-2
20113-8-96
UNE EN 60034-12
Mechanical
Dimensions and
60072
DIN EN 50347
UNEL 13113
output ratings
Mounting dimensions and
60072
DIN 42673-1
UNEL 13113
4999-10 51-105
relationship frame sizes-output
51-110 51-104
ratings, IM B3
60072
DIN 42677-1
UNEL 13117
20106-2-74
ratings, IM B5
60072
DIN 42677-1
UNEL 13118
4999-10 51-105
51-110 51-104
ratings, IM B14
Cylindrical shaft ends
60072
HD 231
DIN 748-3
UNEL 13502
4999-10 51-111
for electric motors
Degrees of protection
60034-5 EN 60034-5 DIN EN 60034-5 CEI EN 60034-5 4999-20 EN60034-5
Methods of cooling
60034-6 EN 60034-6 DIN EN 60034-6 CEI EN 60034-6 4999-21
Mounting arrangements
60034-7 EN 60034-7 DIN EN 60034-7 CEI EN 60034-7 4999-22 51-117
Noise limits
60034-9 EN 60034-9 DIN EN 60034-9 CEI EN 60034-9 4999-51 51-119
Mechanical vibration
60034-14 EN60034-14 DIN EN 60034-14 CEI EN 60034-14 4999-50 51-111
Mounting flanges
DIN 42948
UNEL 13501
Tolerances of mounting
DIN 42955
UNEL 13501/
and shaft extensions
13502
Classification of
60721-2-1
DIN IEC 60721-2-1 CEI EN 60721-1
environmental conditions
Mechanical vibration;
ISO 8821
DIN ISO 8821
balancing
UNE EN 50347
1980
UNE EN 50347
20111-5
EN 60034-6
EN 60034-7
EN 60034-9
EN 60034-14
Motors to special regulations:

Motors with UL, CSA and cURus approval (performance data on request)
[12]
[13]
[ I]
C ONDI T IONS OF INSTALLATION
The motors are designed for operation at altitudes 1000 m above sea-level and at ambient
temperatures of up to 40 C. Exceptions are indicated on the rating plate.
Permissible temperature rises to various standards
Standard/Regulation
Temperature
of coolant

C
Permissible temperature rise in K

(measured by resistance method)
Temperature class
B
F
H
VDE 0530 part 1

International IEC 34-1
Britain BS 2613
Canada CSA
USA NEMA and ANSI
Italy CEI
Sweden SEN
Norway NEK
Belgium NBN
France NF
Switzerland SEV
India IS
80
80
80
80
80
80
80
80
80
80
80
80
40
40
40
40
40
40
40
40
40
40
40
40
105
105
105
105
105
105
105
105
105
105
105
-
125
125
on
request
The motors conform to degree of protection IP 55 to IEC 60034-5. Higher protection on

request.
The standard design for horizontal mounting is suitable for indoor and protected outdoor
installation, climate group MODERATE (see page 18) (temperature of coolant -20 to +40 C).
For unprotected outdoor installation or severe climatic conditions (moisture category wet,
climate group WORLDWIDE, extremely dusty site conditions, aggressive industrial
atmosphere, danger of storm rain and coastal climate, danger of attack by termites, etc.),
as well as vertical mounting, special protective measures are recommended, such as:
Protective cowl (for vertical shaft-down motors)

For vertical shaft-up motors additional bearing seal and flange drainage
Special paint finish
Treatment of winding with protective moisture-proof varnish
Anti-condensation heating (possibly winding heating)
Condensation drain holes
The special measures to be applied have to be agreed with the factory once the conditions
of installation have been settled.
The corresponding conditions of installation have to be clearly indicated in the order.
C ON DITIONS OF INSTALLATION
[ I]
Tolerances
For industrial motors to EN 60034-1, certain tolerances must be allowed on guaranteed
values, taking into consideration the necessary tolerances for the manufacture of such
motors and the materials used. The standard includes the following remarks:
1. It is not intended that guarantees necessarily have to be given for all or any of the items
involved. Quotations including guaranteed values subject to tolerances should say so, and
the tolerances should be in accordance with the table.
2. Attention is drawn to the different interpretation of the term guarantee. In some
countries a distinction is made between guaranteed values and typical or declared values.
3. Where a tolerance is stated in only one direction, the value is not limited in the other
direction.
Values for
Tolerance
Efficiency ()
(by indirect determination)
- 0.15 (1 - ) at PN 150 kW
- 0.1 (1 - ) at PN > 150 kW

1 - cos
, minimum 0.02, maximum 0.07
Power factor (cos )
6

Slip (s)
20 % of the guaranteed slip at PN 1 kW
(at rated load and at working temperature)
30 % of the guaranteed slip at PN < 1 kW
Breakaway starting current (IA)
(in the starting circuit envisaged)
+ 20 % of the guaranteed starting current

(no lower limit)
Breakaway torque (MA)

- 15 % and + 25 % of the guaranteed breakaway torque

(+ 25 % may be exceeded by agreement)
Pull-up torque (MS)
- 15 % of the guaranteed value
Pull-out torque (MK)

- 10 % of the guaranteed value

(after allowing for this tolerance, MK/MN not less than 1.6)
Moment of inertia (J)
10 % of the guaranteed value
Mechanical tolerances
According to IEC 60072-1, the following tolerances on mechanical dimensions of electric
motors are permitted:
Parameter
Code
Tolerances
Shaft height
H

D-DA
Diameter of shaft end1)

Hub key width
F-FA
Flange spigot
N

1)
up to 250
over 250
from 11 to 28 mm
from 38 to 48 mm
from 55 to 100 mm
up to 132
over size 132
-0,5 mm
-1 mm
j6
k6
m6
h9
j6
h6
Centerings holes in shaft extension to DIN 332 part 2
[14]
[15]
[ I]
ME C H ANIC AL DESIGN
Degrees of protection
Degrees of mechanical protection for machines are designated in accordance with IEC
60034-5 by the letters IP and two characteristic numerals.
First numeral: Protection against contact
and ingress of foreign bodies

IP
0

1

Second numeral:
Protection against ingress of water
Description
IP
No special protection
Description
No special protection
Protection against vertically
falling water drops (condensation)
Protection against solid foreign 1

bodies larger than 50 mm
(Example: inadvertent contact with
the hand)


(Example: inadvertent contact with
the fingers)

bodies larger than 2.5 mm
(Example: Wires, tools)
Protection against waterspray at

up to 60 from vertical

(Example: Wires, bands)
Protection against water splashed

from any direction
Protection against dust 5

(harmful deposits of dust)

Protection against water

projected by a nozzle from
any direction
Complete protection against dust
Protection against heavy seas or

water projected in powerful jets
Protection when submerged

between 0.15 and 1 m.
Protection when continuously

submerged in water at conditions
agreed between the
manufacturer and the user
Protection against dropping water

when inclined by up to 15
MECHANICAL DESIGN
[ I]
Mounting arrangements
Mounting arrangements for rotating electrical machines are designated according to IEC
60034-7, Code I (in brackets Code II).
Our motors are available with the mounting arrangements listed below, depending on
design and frame size. Motors with aluminium frame are equipped with removable feet that
allow easy change of mounting arrangement.
Foot mounting
Flange mounting
Motors without endshield
IM B3 (IM 1001)
IM B5 (IM 3001)
Flange type A to
DIN 42 948 at
drive end
IM B9 (IM 9101)
without endshield
and without
ball bearings
on drive end
IM B6 (IM 1051)
IM V1 (IM 3011)
Flange type A to
DIN 42 948 at
drive end
IM V8 (IM 9111)
without endshield
and without
ball bearings
on drive end
IM B7 (IM 1061)
IM V3 (IM 3031)
Flange type A to
DIN 42 948 at
drive end
IM V9 (IM 9131)
without endshield
and without
ball bearings
on drive end
IM B8 (IM 1071)
IM B35 (IM 2001)

Flange type A to
DIN 42 948 at
drive end
IM B15 (IM 1201)

without endshield
and without
ball bearings
on drive end
IM V5 (IM 1011)
IM B14 (IM 3601)

Flange type C to
DIN 42 948 at
drive end
IM V6 (IM 1031)
IM V18 (IM 3611)

Flange type C to
DIN 42 948 at
drive end
IM B34 (IM 2101)

Flange type C to
DIN 42 948 at
drive end
IM V19 (IM 3631)

Flange type C to
DIN 42 948 at
drive end
It is essential to state the desired mounting arrangement when ordering, as the constructive
design depends partly on the mounting arrangement.
[16]
[17]
[ I]
Materials
Motor parts
Frame size Material
Motor housing

56 - 160
180 - 315
Aluminium alloy
Cast iron
Endshield

Flanged endshield

Fan cover

Fan

Terminal box

56 - 160
180 - 315
Aluminium alloy*
Cast iron
56 - 160
180 - 315
Aluminium alloy*
Cast iron
56 - 112
56 - 112
132 - 315
Plastics
Sheet steel (optional)
Sheet steel
56 - 315
56 - 160
Plastics
Aluminium alloy (optional)
56 - 112
56 - 112
132 - 160
180 - 315
Plastics
Aluminium alloy (optional)
Aluminium alloy
Cast iron
* Cast iron option for 112-132
Paint finish
Normal finish
Suitable for climate group Moderate to IEC 60721-2-1, e.g. indoor and outdoor
installation.
For short periods: up to 100 % rel. humidity at temperatures up to +30 C.
Continuously: up to 85 % rel. humidity at temperatures up to +25 C.
Standard paint color: RAL 9005.
Special finish K1
Suitable for climate group Worldwide to IEC 60721-2-1, e.g. outdoor installation in
corrosive chemical and marine atmospheres.
For short periods: up to 100 % rel. humidity at temperatures up to +35 C.
Continuously: up to 98 % rel. humidity at temperatures up to +30 C.
MECHANICAL DESIGN
[ I]
Bearings
Classification of bearings (standard design) 1)
Bearings for standard design have permanent lubrication
Ball bearings to ISO15 (DIN 625)

Frame size
No. of

poles

56
2 + 4
63
2 + 4
71
2 - 8
80
2 - 8
90
2 - 8
100
2 - 8
112
2 - 8
132
2 - 8
160
2 - 8
180
2 - 8
200
2 - 8
225
2 - 8
250
2 - 8
280
2 - 8
315 S/M/L
2
315 S/M/L
4 - 8
1)
Drive end
6201-2Z
6202-2Z
6203-2Z
6204-2Z C3
6205-2Z C3
6206-2Z C3
6306-2Z C3
6208-2Z C3
6309-2Z C3
6311 C3
6312 C3
6313 C3
6314 C3
6316 C3
6317 C3
NU319 C3
Non-drive end
6201-2Z
6202-2Z
6203-2Z
6204-2Z C3
6205-2Z C3
6206-2Z C3
6306-2Z C3
6208-2Z C3
6309-2Z C3
6311 C3
6312 C3
6313 C3
6314 C3
6316 C3
6317 C3
NU319 C3
With regard on bearings for special design, consult us
Lubrication note
Permanent lubrication up to 160 frame
180 frame up with regreasing facility lubrication nipple is a flat M10x1 to DIN 3404
Roller bearings
Roller bearings available as an option. Please consult us.
Bearing arrangement
Frame size
Bearing drive end
Bearing non-drive end
Spring-loaded
56 - 160 Standard motors

180 - 315 Standard motors
Non-locating bearing
Locating bearing
Non-drive end
Non-drive end
[18]
[19]
[ I]
Belt drive
The data apply only to the normal drive end shaft extension of IM B3 motors with one
speed.
Calculation of belt drive:

19120 P k
FR =
D1 n

FR = Radial shaft load in N

P = Output in kW

n = Speed in min-1

D1 = Pulley diameter in m

k = Belt tension factor, varying with the type of belt, assumed to be approximately:
3-4
for normal flat belt without idler pulley
2-2.5 for normal flat belt with idler pulley
2.2-2.5 for V-belt
For exact data apply to the belt manufacturer.
Maximum permissible axial forces without additional radial forces*

Frame
size
3000

min -1

kN

56
0.16
63
0.19
71
0.23
80
0.32
90
0.34
100
0.48
112
0.48
132 S
0.80
132 M
0.78
160 M
0.84
160 L
0.82
180
0.82
200
0.82
225
1.10
250
1.00
280
1.70
315
2.00
Horizontal shaft
1500
1000
min -1
min -1
kN
kN
750
min -1
kN
0.21
0.26
0.33
0.44
0.48
0.68
0.68
1.13
1.09
1.18
1.15
1.15
1.15
1.60
1.60
1.90
14.00
-
-
0.37
0.50
0.54
0.77
0.77
1.28
1.24
1.33
1.30
1.30
1.30
2.40
2.50
2.90
14.00
-
-
0.33
0.46
0.49
0.70
0.70
1.16
1.13
1.21
1.18
1.18
1.18
1.90
2.00
2.40
14.00
Vertical shaft - force upwards

3000
1500
1000
750
min -1 min -1
min -1 min -1
kN
kN
kN
kN
0.18
0.21
0.26
0.34
0.38
0.54
0.56
1.00
0.99
1.18
1.18
1.18
1.18
2.10
2.30
2.90
3.60
0.22
0.28
0.35
0.47
0.47
0.74
0.75
1.32
1.30
1.52
1.51
1.51
1.51
2.60
2.70
3.10
8.00
-
-
0.36
0.48
0.53
0.76
0.77
1.36
1.33
1.56
1.55
1.55
1.55
2.90
3.20
3.60
9.20
-
-
0.39
0.53
0.58
0.83
0.84
1.47
1.45
1.68
1.67
1.67
1.67
3.40
3.70
3.70
7.40
Values for 50 Hz. For service on 60 Hz, reduce values by 10%

* Consult according to direction of force
Vertical shaft - force downwards

3000
1500
1000
750
min -1
min -1
min -1 min -1
kN
kN
kN
kN
0.15
0.17
0.21
0.29
0.31
0.43
0.40
0.61
0.58
0.50
0.46
0.46
0.46
0.30
0.20
0.15
1.00
0.19
0.24
0.30
0.41
0.44
0.62
0.60
0.93
0.89
0.83
0.79
0.79
0.79
0.70
0.60
0.30
1.90
-
-
0.31
0.43
0.46
0.64
0.62
0.97
0.92
0.87
0.82
0.82
0.82
1.00
1.10
0.80
2.40
0.34
0.47
0.51
0.71
0.69
1.08
1.03
0.99
0.94
0.94
0.94
1.50
1.50
1.00
2.90
MECHANICAL DESIGN
[ I]
Permissible radial forces

Without additional axial force (Ball bearings)
Nominal life = 20.000 h (Lh10)
FR = permissible radial force in kN in load point corresponding to half shaft extension
Size

3000
min -1
kN
1500
min -1
kN
1000
min -1
kN
750
min -1
kN

56
63
71
80
90
100
112
132 S
132 M
160 M
160 L
180 M
180 L
200 L
225 M
250 M
280 S
280 M
315 S/M
315 L
0.34
0.38
0.46
0.59
0.67
0.92
0.93
1.35
1.40
1.55
1.58
3.00
3.02
5.24
6.11
6.79
7.76
7.79
7.02
7.03
0.42
0.48
0.58
0.83
0.94
1.29
1.30
1.90
1.97
2.17
2.22
4.44
4.47
6.85
7.80
8.82
11.90
11.99
11.35
11.37
-
-
0.67
0.86
0.97
1.33
1.34
1.96
2.03
2.23
2.29
4.55
4.58
8.01
9.09
10.31
13.87
13.97
13.40
13.35
0.73
0.94
1.07
1.47
1.48
2.15
2.23
2.46
2.52
4.76
4.79
8.94
10.12
11.45
15.44
15.55
15.13
15.09
[20]
[21]
[ I]
Special endshields and flanges

Full range of smaller sized and over sized flanges
Frame
size
Smaller sized Flange

IMB14
IMB5 1)
Over sized Flange

IMB5
IMB14

56
63
71
80
90 S-L
100 L
112 M
132 S
132 M
160 M
160 L
NA
56
56-63
63-71
63-71
71-80
80 2)-90 2)
112 2)
112
NA
NA
NA
71 3)
80-90
NA
100 3)
NA
132 7)
NA
160 4)
NA
NA
NA
56
63
63-71
71-80
90
90
112
112
132
132
63
71-80
80-90
90-100
100-112
132
132
160 1) 4)
160
NA
NA
Possibility to fit over sized bearings:
Availability of aluminium endshields and flanges

with steel insert
Frame
size
Frame Endshield Endshield

size
DE
NDE
IMB5
IMB3

56
NA
63
6203-6205
71
6204-6205
80
6205-6206
90 S-L
6206
100 L
6306
112 M
6208
132 S
6308-6309
132 M
6308-6309
160 M
NA
160 L
NA
IMB5
IMB14
NA
6203
6204-6205
6205-6206
6206-6308
6306-6208
6208
6308 4)
6308-6309
6310
6310
NA
6203-6205
6204-6205
6205-6206
6206
6306
6208
6308 4)
6309
6310
6310

71
80
90 S-L
100 L
112 M
132 S
132 M
160 M
160 L
A
A
A
A
A
NA
NA
NA
NA
A
A
A
A
A
NA
NA
NA
NA
A
A
NA
A
A
NA
A 5)
NA
NA
IM B14
NA
A
NA
NA
NA
NA
NA
NA
NA
For higher output (progressive motor) please consult us

Availability of cast iron endshields and flanges
Frame
size
Endshield
DE

71
80
90 S-L
100 L
112 M
132 S
132 M
160 M
160 L
NA
A 6)
A 6)
A 6)
A 6)
A
A
A
A
Endshield
NDE
IMB5
IM B14
NA
A 6)
A 6)
A 6)
A 6)
A
A
A
A
NA
NA
NA
NA
NA
A
A
A
A
A Available
NA Not available
1) Not available for all motor ratings; consult us
2) Cast iron endshield with radial slotted holes
3) Not interchangeable with standard execution

NA
NA
NA
NA
NA
A
A
A
A
4)
DE
Regreasing device
NDE
IM B5
IM B14
NA
NA
NA
NA
NA
NA
A
A
A
NA
NA
NA
NA
NA
NA
A
A
A
NA
NA
NA
NA
NA
A
A
A
A
NA
NA
NA
NA
NA
A
A
A
A
Cast iron endshield

Only with oversized bearing (6308)
6) Special mechanical design
7) Only with oversized bearing (6208)
5)
MECHANICAL DESIGN
[ I]
Cooling
Surface cooling, independent of the direction of rotation.
Motors type AM available without internal fan as type AG, e.g. for installation in a directed
air stream (outputs on request).
Vibration
The amplitude of vibration in electric motors is governed by EN 60034-14 Mechanical
vibration of rotating electrical machines with shaft heights 56 and larger - methods of
measurement and limits.
Standard motors are designed to vibration grade A (normal). Vibration grade B is available
at extra cost.
Pole-changing motors in Dahlander connection can only be supplied in vibration
grade A.
Rotors are at present dynamically balanced with half key fitted as per DIN ISO 8821.
Other balancing only on request.
The motors are identified as follows:

"H" or "blank" means balanced with half key

"F" means balanced with full key

"N" means no key
Position and dimensions of key
Frame Poles
size
d x l1
b x h
l2
l3
56
63
71
80
90
100
112
132
160
180
200
225
2
225
4
250
2
250
4
280
2
280
4
315
2
315
4
9 x 20
11 x 23
14 x 30
19 x 40
24 x 50
28 x 60
28 x 60
38 x 80
42 x 110
48 x 110
55 x 110
55 x 110
60 x 140
60 x 140
65 x 140
65 x 140
75 x 140
65 x 140
80 x 170
3 x 3
4 x 4
5 x 5
6 x 6
8 x 7
8 x 7
8 x 7
10 x 8
12 x 8
14 x 9
16 x 10
16 x 10
18 x 10
18 x 11
20 x 10
18 x 11
20 x 12
18 x 11
22 x 14
15
15
20
30
40
50
50
70
100
90
90
90
110
110
110
110
140
125
160
2.5
4
5
6
6
6
6
6
6
5
5
5
5
5
5
5
5
5
5
10.2
12.5
16
21.5
27
31
31
41
45
51.5
59
59
64
64
74.5
69
85
69
85
l2
l3
l1
Dimensions in mm.
For larger shafts in special design the dimensions l2 and l3 are maintained.
[22]
[23]
[ I]
Anti-condensation heater
On request, motors which due to strong temperature fluctuations are exposed to
condensation during standstill, can be fitted against surcharge with an anti-condensation
heater (space heater).
For supply voltage and heater rating please refer to the following table:

Frame size
112 - 160
180 - 225
250 - 280
315
Supply voltage (V)

110
110
110
110
or
or
or
or
Heater rating per motor (W)
230
230
230
230
25
50
50
75
During operation of the motor, the heating must be switched off.
Noise
The noise level of an electrical machine is determined by measuring the sound pressure level
in accordance with curve A of the sound level meter to EN 60651 and is indicated in dB (A).
The permitted noise levels of electrical machines are fixed in EN 60034-9 (IEC 34-9). The noise
level of our motors is well below these limit values.
Air-borne sound measurements are carried out in an anechoic testing chamber to EN 21680ISO 1680.
Speed corresponding to a mains frequency of 50 Hz and the number of poles.
Noise levels
The noise values listed below refer to 50 Hz at rated voltage with a tolerance of up to + 3
dB(A). Values for pole-changing motors on request. For 60 Hz supply values are 3-5 dB(A)
higher.
Sound pressure level LpA and sound power level LWA for three-phase single-speed motors with
dimensions and output ratings to IEC 60072
Frame 2 pole 4 pole 6 pole 8 pole
LWA LpA
LWA LpA
LWA LpA
size
LWA LpA

56
63
71
80
90
100
112
132
160
180
200
225
250
280
315
57
58
61
72
74
78
80
81
87
99
101
103
104
105
105
48
49
52
60
62
66
68
72
74
87
89
91
93
94
94
47
47
51
60
61
62
65
71
75
88
91
92
93
98
98
38
38
42
48
49
50
53
59
62
76
79
80
80
86
86
49
52
58
62
65
69
71
85
87
89
89
95
95
40
40
46
51
53
57
58
73
75
77
77
83
83
47
54
58
58
64
69
83
85
86
86
91
91
35
42
46
46
52
56
71
73
75
75
80
80
ELECTRI CAL DESIGN
[ I]
Rated voltage
For the rated voltage of the motors, EN 60034-1 allows a tolerance of 5 %. According to
IEC 60038, the mains voltages may have a tolerance of 10 %.
Therefore the three-phase motors are designed for the following rated voltage ranges
(exceptions are shown in the data tables):

Mains voltage to DIN IEC 38
Rated voltage range of motor
230 V 10%
400 V 10%
690 V 10%
218-242 V 5%
380-420 V 5%
655-725 V 5%
Within the rated motor voltage range, the permissible maximum temperature is not
exceeded. When the motors are operated at the limits of the voltage tolerance, the
permissible overtemperature of the stator winding may be exceeded by 10 K.
Nameplates are marked with the maximum rated currents within the stated voltage ranges.
For brake motors, for motors in 500 V, 50 Hz design, and all not standard voltages, no
voltage range is marked. The voltage tolerances to EN 60034-1 apply.
Rated frequency
Three-phase 50 Hz motors can also be operated on 60 Hz mains, provided the mains
voltage increases proportionally to the frequency. The relative values for starting and
breakaway torque remain nearly unchanged and slightly increase for the starting current.
The rated speed increases by the factor 1.2 and output by factor 1.15. Should a motor
designed for 50 Hz be operated at 60 Hz without the voltage being increased, the rated
output of the motor cannot be increased. Under these operating conditions, rated speed
increases by factor 1.2. The relative values for starting and breakaway torque are reduced
by factor 0.82 and for starting current by factor 0.9.
Additionally to the voltage range for 50 Hz operation, three-phase single-speed motors (not
brake motors) are also marked with the voltage range for 60 Hz operation.
Nameplate examples:
[24]
[25]
[ I]
E LE C T RIC AL DE SIGN
Rated current
For three-phase motors the rated currents listed in the data tables apply to an operating
voltage of 400 V. The conversion to other operating voltages, with output and frequency
remaining unchanged, is to be made as follows:
Nominal voltage (V)
Conversion factor x lN
Rated torque

Rated torque in Nm = 9550 x

230
1.74
380
1.05
400
1.0
440
0.91
500
0.80
660
0.61
690
0.58
Rated power in kW
Rated speed in min-1
Output
The outputs stated in this catalogue are for constant load in continuous running duty S1
according to EN 60034-1, based on an ambient temperature of 40 C and installation at
altitudes up to 1000 m above sea level.
For severe operating conditions, e.g. high switching rate, long run-up time or electric
braking, a thermal reserve is necessary, which could call for higher thermal class or the use
of a motor with a higher rating. In these cases we recommend to enquire with detailed
information on the operating conditions.
Overload
At operating temperature three-phase motors are capable of withstanding an overload for
15 seconds at 1.5 times the rated torque at rated voltage. This overload is according to EN
60034-1 and will not result in excessive heating.
Utilizing thermal class F, motors can be operated continuously with an overload of 12 %.
Nevertheless this is not valid for motors which to catalogue are utilized to thermal class F.
Connection
Motor output
at 50 Hz
230 V
400 V Y
400 V
690 V Y
under 3 kW
4 to 5.5 kW
7.5 kW
standard
on request
standard
standard
on request standard
500 V Y
500 V
690 V
on request
on request
on request
on request
on request
on request
on request
on request
ELECTRI CAL DESIGN
[ I]
Insulation and temperature rise

Class F insulation to EN 60034-1 is used throughout.
In standard design motors are intended for operation at 40 C ambient temperature
with class B temperature rise only, with an overtemperature limit of 80 K. This also
applies for the rated voltage range to IEC 60038. Exceptions are shown on the data
tables.
Temperature rise (T*) and maximum temperatures at the hottest points of the winding
(Tmax) according to the temperature classes of EN 60034-1.

Class B
Class F
Class H
T*
80 K
105 K
125 K
Tmax
125 C
155 C
180 C
*Measurement by resistance method
Output reduction at ambient temperatures over 40 C

Ambient temperature
Class B Reduction of nominal output to approx.
45 C
95 %
50 C
90 %
55 C
85 %
60 C
80 %
When a winding is utilized to temperature class F (105K), no output reduction is required

up to an ambient temperature of 55 C. This does not apply to motors which in their
standard design are already utilized to thermal class F.
Installation at altitudes of more than 1000 m above sea level (see also EN 60034-1)
Altitude of installation
2000 m
3000 m
4000 m
At 40C ambient temperature and thermal class B

Rated output reduced to approx.
92 %
84 %
76 %
At 40C ambient temperature and thermal class F

Rated output reduced to approx.
89 %
79 %
68 %
Full nominal output to data tables with thermal class B

and ambient temperature of
32 C
24 C
16 C
Full nominal output to data tables with thermal class F

and ambient temperature of
30 C
19 C
9 C
[26]
[27]
[ I]
Starting rate
The permissible number of starts per hour can be taken as given in the table below,
provided the following conditions are met.
Additional moment of inertia moment of inertia of the rotor: load torque rising with the
square of the speed up to nominal torque; starts at even intervals.
Shaft height
56
80
112
160
200
250
-
-
-
-
-
-
71
100
132
180
225
315
Permissible No. of starts per hour for 2p

= 2
= 4
6
100
60
30
15
8
4
250
140
60
30
15
8
350
160
80
50
30
12
For permissible number of starts for pole-changing motors please consult us, indicating the
complete operating conditions.
ELECTRI CAL DESIGN
[ I]
Thermal protection
The decision on a particular type of thermal protection should be taken according to the
actual operating conditions. Motors may be protected by means of current-dependent
thermal protection switches, overcurrent relays and temperature detectors.
Thermal protection is possible as follows:
Thermal protection switch with bimetal release
Thermistor protection with semiconductor temperature detectors (PTC) in the stator
winding in connection with release (if required, with additional motor protection switch).
Bimetal temperature detector as N/C or N/O in the stator winding (if required, with
additional motor protection switch).
Resistance thermometer for monitoring winding and bearing temperature.
Should protection of the motor be required, we install protection switch with bimetal
release (semiconductor temperature detectors on request).
Operating specifications
Thermal cut-out
NORMALLY OPEN
N/O TYPE
Ti = Activation temperature
Tr = Reset temperature
Tr
Ti
Operating specifications
of the thermistors
NORMALLY CLOSED
N/C TYPE
Tr = Reset temperature
PTC TYPE
OHM
Resistance
Tr
Ti
Ti
[28]
[29]
[ I]
Examples of connection
Protection method
Protection against:
Motor protection switch with thermal and Overload in continuous service

Locked rotor
electromagnetic overcurrent release

Contactor with overcurrent relay

Thermistor protection and fuse

in service against:
Overload in continous service
Long starting and braking periods
High switching rate
in case of fault against:

Obstruction of cooling
Increased ambient temperature
Single-phase operation
Frequency fluctuations
Switching against locked rotor
Semiconductor temperature detector

with release

in service against:
Overload in continous service
Long starting and braking periods
High switching rate
in case of fault against:

Obstruction of cooling
Increased ambient temperature
Single-phase operation
Frequency fluctuations
Switching against locked rotor
Auxiliaries
Encoder (standard design)
Pulses per revolution
Max outputs frequency
Power supply
Electronics
Current consumption without load
Outputs

Pulse displacement between outputs
Protection
Max speed
Operating temperature
200-2048
100 kHz
5Vdc
line driver
100 mA
2 signals with rectangular pulses A, B
2 signals with inverted rectangular pulses A, B
zero pulse and inverted zero pulse
90
IP 54
3000 (6000) min -1
-10C 85C
ORDER DATA
[ I]
Motors for normal continuous duty (S1) and normal operating conditions
Quotation (if submitted)
Quantity
Designation
No./Date
Units
Type
Output (for pole-changing motors, outputs referred to speeds)
kW
Speed (for pole-changing motors, outputs referred to speeds)
min-1
Direction of rotation (viewed on drive end)

Mounting arrangement (to IEC 60034-7)
Degree of protection, motor/terminal box (to IEC 60034-5)
Mains voltage
Mains frequency
Hz
Method of starting (direct-on-line or Y-)

Location of terminal box
Machine to be driven
Dimensions of cables, if these differ from those allocated by VDE 0100, referred to an
ambient temperature of 40 C, or when aluminium conductors are used. It should be stated
when parallel connected conductors are used.
Additional information for special designs
Second or non-standard shaft extension
Radial sealing ring
Paint coating
Corrosive protection
Vibration level
Anti-condensation heating
Temperature detectors
Noise requirements
Mechanical or electrical brake
Special stipulations
[30]
[31]
[ I]
ORDE R DATA
Additional information for special duties and difficult operating conditions

S 2: ... min (short-time duty)
S 3: ... % - ... min (intermittent duty)
S 4: ... % - JM ... kgm2 - Jext ... kgm2 (intermittent duty with starting)
S 5: ... % - JM ... kgm2 - Jext ... kgm2 (intermittent duty with electric braking)
S 6: ... % - min (continuous-operation periodic duty with intermittent load)
S 7: .JM ... kgm2 - Jext ... kgm2 (continuous-operation periodic duty with electric braking)
S 8: .JM ... kgm2 - Jext ... kgm2 (continuous-operation periodic duty with speed changes)
S 9: ... kW (continuous duty with non-periodic load and speed variations).
For this duty type suitable full load values should be taken as the overload concept.
S10: p/t .... r .... TL (Duty with discrete constant loads).
Starting conditions (no-load or loaded starting)
Shock loads
Load torque curve during run-up (characteristic)
Moment of inertia (Jext) referred to the motor shaft
kgm2
Description of the type of drive (direct coupling, flat or V-belt,

straight or helical gears, sprocket, crank, eccentric cam, etc.)
Radial force (or diameter of drive element)
Direction of force and point of application (distance from shaft shoulder or width
of drive element)
mm
Axial force and direction of application (pull/thrust)
Ambient conditions (e.g. increased humidity, dust accumulation, corrosive gases or vapours,
increased or extremely low ambient temperature, outdoor installation, installation at
altitudes over 1000 m above sea level, external vibration, etc.)
[ T]
THREE-PHASE MOTORS
[32]
[33]
Three-Phase Motors - Technical Catalogue 1031/11
[ T]
Terminal boxes
The location of the terminal box in standard design is on top; on the right or on the left are
possible.
Motors 71-160 frame size have removable feet for easy change of terminal box position
For motors with mountings IM B6, IM B7, IM B8, IM V5, IM V6 the location of the terminal
box is related to an IM B3 mounting.
The position of the entry openings can be adjusted to suit the existing connection facilities
by turning through 90. Should special accessories be used (temperature detectors, anticondensation heating, etc.) please enquire.
For motors in standard design, the cable gland does not belong to our scope of delivery.
For plastic terminal boxes, only plastic glands may be used (shock protection).
When using screened leads, a metal terminal box is required.
Direction of cable entries
Frame size
Degree of
Max. cable
Terminal

protection
Thread for cable entry
section
thread

Metric 1)
Pg 2)
mm 2
56 - 71
80
90 - 112
132
160
180
200
225
250 - 280
315
IP 55
IP 55
IP 55
IP 55
IP 55
IP 55
IP 55
IP 55
IP 55
IP 55
1 x M16/1 x M20
1 x Pg 11/1 x Pg 13.5
1 x M25/1 x M20
1 x Pg 13.5/1 x Pg 16
1 x M25/1 x M20
1 x Pg 13.5/1 x Pg 16
2 x M32
2 x Pg 21
2 x M40
2 x Pg 29
2 x M40/1 x M20
2 x M40/1 x M25
2 x M50/1 x M25
2 x M50/1 x M25
2 x M63/1 x M25 3)

2.5
2.5
4
4
16
35
35
50
50
185
1) Pitch
1.5
thread to DIN 40 430 (on request)
3) Terminal box with unscrewable cable entry plate
2) Pg
M4
M4
M5
M5
M6
M8
M8
M10
M10
M12
Max. external
cable diam.
mm
12
16
16
20
28
28
34
34
40
48
[ T]
MECHANICAL DESIGN
g4
Standard design
A
91
91
91
111
111
111
111
133
150
187
233
233
260
260
320
93
93
93
116
116
116
116
133
150
162
186
186
218
218
280
Material
F rame g4
size h
56
63
71
80
90
100
112
132
160
180
200
225
250
280
315
Terminal box on top
g4
98
103
112
129
138
145
161
198
238
268
300
335
366
408
530
Plastic UL 94 V0
Plastic UL 94 V0
Plastic UL 94 V0
Plastic UL 94 V0
Plastic UL 94 V0
Plastic UL 94 V0
Plastic UL 94 V0
Aluminium
Aluminium
Cast Iron
Cast Iron
Cast Iron
Cast Iron
Cast Iron
Cast Iron
Terminal box at the side

Special design
g4
Frame
size h
56
63
71
80
90
100
112
180
200
225
250
280
left
1)
Material
100
105
114
139
148
155
171
285
310
334
375
409
94
94
94
110
110
110
110
209
241
272
272
g4
272
94
94
94
110
110
110
110
220
246
254
254
254
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Cast Iron
Cast Iron
Cast Iron
Cast Iron
Cast Iron
g4
right
On frame size 56-63 the terminal box is
supplied displaced towards the non-drive
end
1)
[34]
[35]
[ T]
Connection diagrams
Windings of standard three-phase single speed motors can be connected either in star or
delta connection.
Star connection
A star connection is obtained by connecting W2, U2, V2 terminals to eachother and the U1,
V1, W1 terminals to the mains. The phase current and voltage are:
Iph = In ; Uph = Un / 3
where In is the line current and Un the line voltage referred to the star connection.
Delta connection
A delta connection is obtained by connecting the end of a phase to the beginning of the
next phase.
The phase current Iph and the phase voltage Uph are:
Iph = In / 3 ; Uph = Un
where In and Un are referred to the delta connection.
U1
U1
W1
L1
V1
W1
V1
W2
U2
V2
W2
U2
V2
U1
V1
W1
U1
V1
W1
L2
L3
Star connection
L1
L2
L3
Delta connection
Star-delta starting
Star-delta starting allows a peak current reduction. It can be used only when the reduced
starting torque obtained is higher than the resistant torque. Actually, it should be noted that
the torque of an induction squirrel-cage motor is directly proportional to the square of the
voltage. Motors whose rated voltage with delta connection corresponds to the mains
voltage, can be started with the star-delta method.
All motors can be supplied with windings designed for star-delta starting (for example: 400
V / 690 V Y).
[ T]
ELECTRI CAL DESIGN
Pole-changing motors
Standard pole-changing motors are designed for single voltage and direct-on-line starting.
When the ratio between the two speeds is from 1 to 2, the standard motors have one single
winding (Dahlander connection). For the other speeds, the motors have two separate
windings.
AM/AMV - two separate windings
L1
L3
L2
2U
2V
2W
2U
2V
2W
1U
1V
1W
1U
1V
1W
High speed
L1
L2
L3
Low speed
AM - Dahlander connection / YY
L1
1U
2V
1W
2U
2V
2W
1U
1V
1W
2U
L2
L3
2U
2V
2W
1U
1V
1W
2W
1U
1V
2U
Low speed
1V
1W
2W
L1
L2
2V
High speed
L3
AMV - Dahlander connection Y/ YY

L1
L2
L3
2U
1U
2U
2V
2W
1U
1V
1W
2U
2V
2W
1U
1V
1W
2W
2V
1U
2U
1W
Low speed
1V
1W
2W
1V
L1
L2
L3
2V
High speed
[36]
[37]
[ T]
ca ge m oto r s d ri ven by frequency conv er te r s
Motors frame sizes 90 upwards in standard design are suitable for operation on static
frequency converters, taking into account the following remarks:
Maximum converter output voltage 500V at peak voltages 1460V and du/dt 13 kV/
us. For higher converter output voltages or stresses, a special insulation is required.
With square characteristic of the load torque, motors can be driven with their rated
torque.
For constant torque, the rated torque of motors with internal cooling must be reduced
due to reduced cooling air inlet. Depending on the control range, the use of an external fan
would be advisable.
The motors frame sizes 90 112 are suitable for a maximum output frequency of the
converter of 60 Hz (e.g. applications with square torque, control range 1:10, such as pumps
and fans). For higher frequencies, a special range with type designation AMI is available on
request. From frame size 132 upwards, motors designed /Y 230/400 V, 50 Hz can be
operated in delta with a maximum frequency of 87 Hz (observe mechanical limit speed).
The motors frame size 56 80 can be operated on single-phase converters up to maximum
60 Hz. (Special range with type designation AMI for operation on three-phase converters
with output voltage 400 V and output frequency > 60 Hz).
The electrical values and dimensions of the range AMI in frame size 56 to 112 are identical
to AM motors (see data tables pages 41-43).
no field weakening
with field weakening
MU/MN
Torque caracteristics of
three-phase motors driven
by frequency converters.
2
3
External cooling
Internal cooling motors 2p = 2
Internal cooling motors 2p = 4-8
f [Hz]
Noise
Depending on the operating point and converter type, converter-fed motors produce
between approx. 4 - 10 dB(A) higher noise values than when supplied from the mains. For
motors driven with a frequency over 50 Hz, more fan noise is produced. We recommend
the use of an external fan.
[ T]
SPARE PAR TS
Part description

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Shaft protection
Dust seal drive end
Endshield drive end
Bearing drive end
Stator frame
Terminal board
Fixing screw terminal board
Gasket terminal box
Terminal box
Fixing screw terminal box
Terminal box lid
Fixing screw terminal box lid
Gasket terminal box lid
Blank gland plug
Blank gland plug
16
17
18
19
20
21
22
23
24
25
26
27
28
29
Key
Rotor complete
Bearing non-drive end
Pre-load washer
Endshield non-drive end
Fan cover
Fixing screw fan cover
Fan
Fixing bolt endshield non-drive end
Fixing bolt endshield drive end
Fixing bolt motor feet
Motor feet
Fixing washer motor feet
Fixing nut motor feet
Only motors 71-160 frame size have removable feet for easy change of terminal box
position
In enquires and orders for spare parts please state always: designation of spare part, motor
type, mounting arrangement, motor serial number (Product No. when available).
Enquires and orders cannot be handled without these data.
[38]
[39]
[ T]
T YPE DE S IGNATION
Apart from other information, it is necessary to specify the exact type designation in all
enquiries, when ordering spare parts or replacement motors or when asking for documentary
information.
The type designation of our motors comprises 8 points of reference, each of which may
consist of several letters and/or numerals. The meaning of each symbol can be seen from
the following table. For motors not included in our standard range, special symbols may be
used which are not listed here.
Meaning of the symbols
Ref. Meaning
Description of symbols used for our motors
point
1
Asynchronous motor
2
Cooling

M
G
MFV
Surface cooled with external fan, cooling fins

Surface cooled without external fan, cooling fins
Surface cooled with forced ventilation, cooling fins
3
Type of motor

blank
H
HE
PH
PE
V
I
Three-phase motor, standard efficiency IE1 code

Three-phase motor, efficiency to EPACT regulations
Three-phase motor, high efficiency IE2 code
Three-phase motor, premium efficiency EISA regulations
Three-phase motor, premium efficiency IE3 code
Three-phase pole-changing motor for driving fans
Special design for three-phase motor driven with frequency converter
Type of motor
Shaft centre height 56, 63, 71, 80, 90, 100, 112, 132,160, 180, 200, 225, 250, 280, 315
5
Frame length

Z
S
M
L
6
Mechanical

design and

output value

A
B
...
Z
7
Frame material

8
Number of poles

A
G
2 4 6 8 -
Mechanical dimension (short)

Mechanical dimension (medium)
Mechanical dimension (long)
Aluminium frame
Cast iron frame
4/2
8/4
4/6
6/8
Example
Three-phase motors designed

for range of rated voltage
380-420 V 5% - 50 Hz
IE1
Standard efficiency motors, IE1 code

kW
HP
Temperature rise to class B
MN
min-1 Nm
50%
IE1

cos
75% 100%
IN
IA/IN MA/MN MS/MN MK/MN
400V 380-420V 10-3 kgm2
2810
2800
0.3
0.4
49.0
51.0
53.0
56.0
59.0
62.0
0.67
0.68
0.35
0.40
0.40
0.45
3.9
3.5
3.8
3.4
3.8
3.4
3.9
3.5
0.09
0.1
3.4
3.5

Type
[ T]
For mains voltage

to IEC 60038
400 V 10% - 50 Hz
kg
3000 min-1 (2 poles)

AM 56Z AA
AM 56Z BA
2
2
0.09
0.12
0.12
0.16
AM 63Z AA
AM 63Z BA
AM 63Z CA
2 0.18 0.25
2 0.25 0.33
2* 0.37 1) 0.50 1)
2790
2790
2800
0.6
0.9
1.3
54
57
54
58
62
58
63.0
66.0
65.0
0.73
0.70
0.70
0.60
0.80
1.20
0.65
0.75
1.25
3.7
4.5
4.6
3.0
3.2
3.4
3.0
3.2
3.3
3.1
3.3
3.4
0.14
0.17
0.20
3.6
4.1
4.4
AM 71Z AA
AM 71Z BA
AM 71Z CA
2 0.37 0.50
2 0.55 0.75
2* 0.75 1) 1.0 1)
2820
2830
2800
1.3
1.9
2.6
58.0
57.0
58.9
64.0
64.0
65.7
70.0
71.0
72.6
0.78
0.77
0.76
1.0
1.5
2.0
1.2
1.6
2.1
4.7
4.8
5.2
3.6
3.2
3.1
3.4
3.1
3.2
3.6
3.3
3.1
0.36
0.42
0.61
5.8
6.2
7.2
AM 80Z AA
AM 80Z BA
AM 80Z CA
2 0.75
1
2
1.1
1.5
2* 1.5 1) 2 1)
2840
2810
2825
2.5
3.7
5.1
66.3
72.1
74.7
71.5
75.0
77.5
73.0
75.3
77.8
0.78
0.82
0.83
1.9
2.5
3.3
2.0
2.6
3.4
5.0
4.6
5.0
2.8
2.4
2.9
2.8
2.8
3.0
2.9
2.9
3.3
0.75
0.89
1.05
8.4
9.5
11.1
2
2*
2
2*
1.5
1.8
2.2
3 1)
2830
2805
2860
2860
5.1
6.1
7.3
10.0
75.6
74.9
81.5
78.7
78.7
78.0
82.8
81.8
78.6
78.2
81.8
82.2
0.82
0.80
0.81
0.80
3.4
4.2
4.9
6.6
3.5
4.3
4.9
6.8
5.0
4.5
7.1
7.2
3.1
2.6
4.1
3.9
2.9
2.4
3.6
3.4
3.0
2.5
4.0
3.8
1.37
1.37
1.8
2.09
12.7
12.7
16.0
18.7
AM 100L AA
AM 100L BA
AM 100L CA
2
2*
2*
3
4
4 1) 5.5 1)
5.5 1) 7.5 1)
2860
2835
2865
10.0
13.5
18.3
78.9
81.1
83.7
81.4
82.5
84.6
81.5
81.7
83.3
0.85
0.88
0.86
6.4
8.0
11.1
6.7
8.1
11.3
6.0
6.2
7.2
3.1
2.9
3.5
3.1
2.5
3.4
3.3
2.9
4.1
2.80
3.35
4.5
19.3
19.7
25.9
AM 112M AA
AM 112M BA
AM 112M CA
2
2*
2*
4
5.5
7.5
2880
2900
2900
13.3
18.1
24.7
81.9
83.6
86.7
84.0
84.7
87.8
83.5
85.0
87.1
0.82
0.86
0.87
8.4
10.9
14.3
8.7
11.2
14.8
8.0
7.8
8.7
3.4
3.5
4.0
3.5
3.4
3.9
3.6
3.6
4.0
5.20
6.48
8.58
24.3
27.4
33.6
5.5
7.5
7.5
10
9.2 12.5
11
15
15 1) 20 1)
2890
2880
2900
2880
2920
18.2
24.9
30.3
36.5
49.1
83.2
85.6
84.7
87.1
86.4
84.7
86.7
86.8
88.1
88.6
85.0
86.1
87.0
88.0
88.9
0.83
0.87
0.84
0.85
0.83
11.3
14.5
18.4
21.3
29.5
11.4
14.9
18.8
21.7
30.5
6.0
6.4
7.0
6.9
7.0
2.2
2.9
2.8
3.2
3.2
2.1
2.7
2.4
2.8
2.8
2.3
3.1
3.2
3.8
3.7
10.63
13.83
15.0
17.13
20.30
37.0
42.6
48.0
52.5
59.0
2940
2940
2950
2940
35.7
48.7
59.9
71.5
83.4
87.3
88.2
88.7
86.4
88.9
89.7
90.5
87.7
88.9
89.6
90.4
0.83
0.85
0.87
0.90
21.9
28.6
34.3
39.1
22.7
29.2
34.8
39.4
7.4
8.1
8.5
8.4
2.5
3.1
3.6
3.0
2.3
2.6
3.0
2.6
3.1
3.7
4.2
3.7
40.00
51.75
64.00
64.00
77.0
94.0
107.8
108.7
AM
AM
AM
AM
90S AA
90S BA
90L CA
90L DA
AM
AM
AM
AM
AM
132S YA
132S ZA
132M ZA
132M RA
132M TA
2
2
2*
2*
2*
AM
AM
AM
AM
160M VA
160M XA
160L XA
160L RA
2
11
2
15
2 18.5
2* 22
2
2.5
3
4 1)
5.5
7.5
10
15
20
25
30
1) Temperature rise to class F

* Higher output (progressive motor)
IE code not applicable to motors 2, 4, 6 poles with PN < 0.75 kW. Efficiency testing method: IEC 60034-2;1996
High efficiency motors - IE2 code from 180 to 315 frame size
[40]
[41]
[ T]
IE1

380-420 V 5% - 50 Hz
For mains voltage

to IEC 60038
400 V 10% - 50 Hz

MN
min-1 Nm
50%
IE1

cos
75% 100%
IN
400V 380-420V 10-3 kgm2 kg

Type
kW
HP

AM 56Z AA
AM 56Z BA
4
4
0.06
0.09
0.08
0.12
1300
1330
0.4
0.6
42.0
43.0
44.0
47.0
48.0
51.0
0.70
0.74
0.28
0.35
0.32
0.40
2.6
2.5
2.1
2.2
2.0
2.1
2.1
2.2
0.14
0.16
2.7
2.9
AM 63Z AA
AM 63Z BA
AM 63Z CA
4 0.12
4 0.18
4* 0.25
0.16
0.25
0.33
1350
1330
1360
0.8
1.3
1.8
46.0
47.0
49.0
50.0
50.0
52.5
57.0
58.0
58.0
0.65
0.70
0.74
0.50
0.65
0.85
0.55
0.70
0.90
2.4
2.3
2.7
2.0
1.9
2.2
1.9
1.8
2.0
2.0
1.9
2.1
0.25
0.27
0.30
3.3
4.1
4.2
AM 71Z AA
AM 71Z BA
AM 71Z CA
4 0.25 0.33
4 0.37 0.50
4* 0.55 1) 0.75 1)
1340
1370
1380
1.8
2.6
3.8
55.0
60.0
61.0
59.0
63.0
64.0
64.0
67.0
69.0
0.66
0.67
0.68
0.90
1.20
1.70
1.00
1.25
1.80
3.2
3.3
3.6
1.9
2.2
2.4
1.8
2.1
2.3
2.0
2.2
2.4
0.70
0.82
0.95
5.7
6.0
7.3
AM 80Z AA
AM 80Z BA
AM 80Z CA
4 0.55 0.75
4 0.75 1.0
4* 1.1 1) 1.5 1)
1400
1410
1385
3.8
5.1
7.6
67.0
68.7
73.4
69.0
70.8
75.7
70.0
72.4
75.2
0.72
0.72
0.77
1.6
2.1
2.8
1.7
2.2
2.9
3.6
4.4
4.4
2.6
2.8
2.5
2.5
2.3
2.5
2.6
2.8
2.6
1.58
2.00
2.41
8.2
9.3
10.6
4
4
4
4*
1.1
1.5
1.8 1)
2.2 1)
1.5
2.0
2.5 1)
3.0 1)
1400
1400
1380
1400
7.5
10.2
12.5
15.0
75.8
77.6
76.3
78.3
76.0
77.8
76.5
78.5
75.4
77.5
75.9
77.9
0.78
0.78
0.81
0.77
2.7
3.6
4.2
5.3
2.9
3.7
4.3
5.5
5.2
5.7
5.5
4.8
2.5
2.8
2.7
2.9
2.4
2.6
2.5
2.8
2.8
3.0
2.9
3.2
2.5
3.13
3.13
4.05
12.5
14.5
14.5
17.0
AM 100L AA
AM 100L BA
AM 100L CA
4
4
4*
2.2
3.0
3.0
4.0
4.0 1) 5.5 1)
1435
1425
1400
14.6
20.1
27.3
76.5
82.0
80.8
79.1
83.0
81.8
79.9
81.6
80.4
0.74
0.78
0.78
5.4
6.8
9.2
5.6
6.9
9.3
5.3
4.6
6.0
2.5
2.4
2.6
2.4
2.3
2.4
2.7
2.5
2.9
4.6
5.58
6.05
19.5
22.5
25.0
AM 112M AA
AM 112M BA
4
4*
4.0
5.5
5.5 1) 7.5 1)
1430
1430
26.7
36.7
83.2
84.1
83.9
84.8
83.1
84.0
0.82
0.83
8.5
11.4
8.8
11.7
6.3
6.5
2.2
2.2
2.0
2.0
2.8
2.9
12.2
15.2
29.5
34.0
1430
1440
1440
1440
36.7
49.7
61.0
72.9
87.2
87.3
86.5
83.5
87.1
87.2
87.5
83.9
86.1
86.2
87.3
84.5
0.82
0.83
0.86
0.87
11.3
15.3
17.7
21.5
11.7
15.5
17.9
22.0
5.8
6.8
8.0
8.3
3.0
3.1
3.5
3.1
2.7
2.7
3.2
3.0
3.0
3.1
3.5
3.3
22.40
29.25
37.25
37.25
41.9
51.0
65.0
65.0
1460
1460
1460
1460
71.9
98.1
121.8
143.9
88.5
89.4
89.9
90.4
89.3
90.2
90.7
91.2
88.7
89.6
90.1
90.6
0.80
0.84
0.84
0.86
22.4
28.8
35.4
41.0
22.7
29.6
36
42
7.5
7.0
7.6
7.8
2.5
2.5
2.5
2.4
2.2
2.2
2.2
2.2
3.1
3.3
3.3
3.2
81.25
105.7
120.4
134.7
88.5
106.5
117.3
128.1
AM
AM
AM
AM
90S AA
90L BA
90L CA
90L DA
AM
AM
AM
AM
132S ZA
132M ZA
132M RA
132M TA
4
5.5
4
7.5
4
9.2
4* 11.0 1)
AM
AM
AM
AM
160M XA
160L XA
160L ZA
160L RA
4
11
4
15
4* 18.5
4* 22
7.5
10.0
12.5
15.0 1)
15
20
25
30


380-420 V 5% - 50 Hz
IE1

kW
HP
MN
min-1 Nm
50%
IE1

cos
75% 100%
IN
400V 380-420V 10-3 kgm2 kg

Type
[ T]
For mains voltage

to IEC 60038
400 V 10% - 50 Hz

AM 71Z AA
AM 71Z BA
6
6
0.18 0.25
0.25 1) 0.33 1)
880
880
2.0
2.7
46.0
46.0
48.0
50.0
53.0
54.0
0.60
0.62
0.85
1.10
0.9
1.2
2.2
2.5
1.6
1.7
1.5
1.6
1.6
1.7
0.60
0.90
6.1
6.6
AM 80Z AA
AM 80Z BA
6
6
0.37
0.55
0.5
0.75
920
920
3.8
5.7
47.0
60.0
58.0
64.0
60.0
68.0
0.70
0.67
1.25
1.75
1.3
1.8
2.7
2.9
1.6
2.2
1.6
2.1
2.1
2.1
1.97
2.47
8.0
9.4
AM 90S AA
AM 90L BA
6
6
0.75
1.1
1.0
1.5
910
920
7.9
11.4
70.5
72.0
72.5
73.5
71.5
73.0
0.63
0.66
2.4
3.3
2.5
3.4
2.9
3.0
1.7
1.7
1.5
1.5
1.7
1.7
3.18
4.78
11.6
15.0
AM 100L AA
AM 100L BA
6
6
1.5
1.8
2.0
2.5
930
940
15.4
18.3
73.3
74.6
75.8
77.1
75.3
76.6
0.69
0.67
4.2
5.1
4.4
5.3
3.7
4.2
1.8
2.4
1.8
2.4
2.3
2.8
6.73
9.43
17.5
22.0
AM 112M AA
AM 112M CA
6
6*
2.2
3
3.0
4.0
940
940
22.4
30.5
77.0
81.8
79.0
82.8
78.0
82.8
0.74
0.74
5.3
7.0
5.4
7.2
4.4
5.3
2.4
2.9
2.4
2.9
2.6
2.9
14.18
18.70
26.0
39.0
6
6
6
6*
3
4
5.5
7.5 1)
4.0
5.5
7.5
10 1)
950
950
950
960
30.2
40.2
55.3
74.6
79.5
81.4
82.2
82.8
81.5
83.1
83.6
83.5
81.3
82.7
83.6
82.9
0.72
0.71
0.71
0.75
7.4
9.9
13.5
17.4
7.5
10.5
13.5
17.6
4.9
4.5
4.1
5.0
2.0
2.2
2.2
2.3
1.8
2.0
1.9
1.9
2.4
2.5
2.2
2.8
23.53
29.50
37.75
54.10
36.7
42.5
55.5
64.1
6
6
7.5
11
10
15
970
960
73.8
109.4
84.4
88.1
86.5
88.5
86.3
87.8
0.78
0.78
16.0
23.4
16.3
24.0
6.2
6.0
2.8
2.5
2.7
2.2
3.2
3.5
103
137
96.6
113.6
AM
AM
AM
AM
132S ZA
132M YA
132M ZA
132M TA
AM 160M ZA
AM 160L ZA

Efficiency testing method IEC 60034-2;1996

MN
min-1 Nm
50%

cos
75% 100%
IN
400V 380-420V 10-3 kgm2 kg

Type
kW
HP
750 min-1 (8 poles)

AM 71Z AA
0.12
0.16
670
1.7
40
44
50
0.55
0.65
0.7
2.4
2.5
2.4
2.5
0.82
6.0
AM 80Z AA
0.25
0.33
680
3.5
40
47
51
0.62
1.1
1.2
2.2
1.8
1.9
2.0
1.97
8.0
AM 90S AA
AM 90L BA
8
8
0.37
0.55
0.5
0.75
680
680
5.2
7.7
52
52
58
58
59
59
0.53
0.54
1.7
2.5
1.8
2.7
2.1
2.1
1.4
1.4
1.3
1.3
1.6
1.6
3.18
4.78
11.4
15.0
AM 100L AA
AM 100L BA
8
8
0.75
1.1
1.0
1.5
690
690
10.4
15.2
59
59
64
67
65
68
0.65
0.62
2.6
3.9
2.8
4.0
3.0
3.0
1.6
1.9
1.5
1.3
1.7
1.6
6.72
15.93
17.6
22.6
AM 112M AA
1.5
2.0
696
20.6
66
69
70
0.66
4.6
4.8
4.0
1.8
2.0
2.4
16.70
35.0
AM 132S ZA
AM 132M ZA
8
8
2.2
3.0
3.0
4.0
710
710
29.6
40.4
79.3
81.3
80.5
82.0
78.8
79.8
0.64
0.67
6.4
8.1
6.6
8.4
3.4
3.6
1.7
1.7
1.6
1.6
1.7
1.9
29.50
37.75
45.5
54.5
AM 160M YA
AM 160M ZA
AM 160L ZA
8
8
8
4.0
5.5
7.5
5.5
7.5
10.0
700
720
710
54.6
72.9
100.9
84.9
85.6
86.3
84.5
85.2
85.8
84.4
85.0
85.5
0.72
0.73
0.74
9.5
12.8
17.1
9.7
13.3
17.8
4.5
4.0
4.0
1.8
1.8
1.8
1.6
1.6
1.6
2.2
2.3
2.3
75
103
137
75.0
92.0
113
[42]
[43]
[ T]
IE2
High Efficiency
Three-phase motors
according to IEC 60034-30;2008
High Efficiency motors, IE2 code


Type
kW
HP
min-1
MN
Nm 50%
For mains voltage

400 V - 50 Hz

IE2
75%
cos
100%
IN
400V 10-3 kgm2 kg

AMHE 71Z AA
2*
0.75
2865
2.5
75.0
78.1
79.4
0.71
1.9
5.2
3.1
3.0
3.1
0.69
8.2
AMHE 80Z AA
AMHE 80Z BA
AMHE 80Z CA
2
2
2*
0.75
1.1
1.5
1
1.5
2
2900
2880
2880
2.5
3.6
5.0
77.3
79.5
80.5
78.5
81.2
82.1
80.5
81.5
82.4
0.78
0.78
0.78
1.7
2.5
3.4
7.0
6.8
7.0
3.6
3.6
3.5
3.4
3.4
3.4
3.6
3.6
3.6
0.7
0.89
1.1
9.5
11.1
13.5
AMHE 90S AA
AMHE 90L CA
2
2
1.5
2.2
2
3
2880
2860
5.0
7.3
81.0
82.5
82.8
84.0
82.8
84.0
0.80
0.85
3.2
4.4
8.1
8.5
3.6
3.5
3.1
3.2
4.0
3.7
1.56
1.8
14.0
16.0
AMHE 100L AA
AMHE 100L BA
2
2*
3
4
4
5.5
2920
2920
9.8
13.1
84.1
85.2
85.8
86.4
85.5
86.1
0.84
0.86
5.9
7.8
8.0
8.2
3.5
3.3
3.0
3.0
4.0
3.8
4.05
4.1
22.8
22.8
AMHE 112M AA 2
AMHE 112M BA 2*
AMHE 112M CA 2*
4
5.5
7.5
5.5
7.5
10
2940
2920
2900
13.0
18.0
24.7
85.5
85.8
86.5
87.0
87.4
88.3
86.8
87.3
88.3
0.88
0.88
0.87
7.6
10.4
14.2
8.0
8.0
8.1
2.9
3.0
3.0
2.1
2.1
2.2
3.3
3.2
3.4
6.48
8.58
10.50
27.4
34.0
36.0
AMHE 132S YA
AMHE 132S ZA
AMHE 132M ZA
AMHE 132M RA
AMHE 132M TA
2
2
2
2*
2*
5.5
7.5
9.2
11
15
7.5
10
12.5
15
20
2900
2900
2920
2920
2920
18.1
24.7
30.1
36.0
49.1
86.0
86.3
88.4
88.1
88.9
88.0
88.6
89.9
90.0
90.6
87.9
88.4
90.0
89.7
90.3
0.89
0.89
0.87
0.90
0.89
10.2
13.8
16.9
19.8
27.0
7.3
7.5
8.8
7.5
7.5
2.7
2.8
3.2
2.8
3.0
2.3
2.5
3.0
2.6
2.8
3.2
3.3
3.8
3.4
3.5
14.0
16.0
17.5
17.5
21.0
46.0
53.0
58.0
58.0
61.0
AMHE 160M YA
AMHE 160M ZA
AMHE 160L ZA
AMHE 160L TA
2
2
2
2*
11
15
18.5
22
15
20
25
30
2930
2930
2935
2935
35.9
48.9
60.2
71.6
88.9
90.0
90.3
91.0
90.2
91.0
91.6
91.7
90.0
90.8
91.2
91.5
0.87
0.88
0.88
0.90
20.4
27.2
33.3
38.6
7.3
7.6
7.9
8.3
2.4
2.5
2.8
3.0
2.2
2.3
2.4
2.6
3.1
3.1
3.4
3.7
51.75 77.0
55.4 87.1
59.7 97.5
64.0 108.7
AMHE 180M ZG 2
22
30
2930
71.7
90.9
91.8
91.4
0.89
39.04
7.5
2.3
2.0
2.8
98
163
AMHE 200L PG
AMHE 200L RG
2
2
30
37
40
50
2930
2930
97.8
120.6
91.3
91.6
92.3
92.9
92.4
92.8
0.88
0.90
53.3
64.0
6.7
6.3
2.4
2.3
2.0
2.0
2.7
2.7
178
204
228
242
AMHE 225M PG 2
45
60
2940
146.2
92.8
93.3
93.2
0.89
78.3
6.9
2.3
2.0
2.8
285
308
AMHE 250M PG 2
55
75
2950
178.0
92.9
93.8
93.7
0.90
94.1
8.0
2.3
1.9
2.7
411
405
AMHE 280S G
AMHE 280M G
2
2
75
90
100
125
2960
2960
242.0
290.4
93.2
93.6
94.5
94.3
94.1
94.4
0.90
0.91
127.8
151.2
8.0
7.7
2.2
2.2
1.9
1.9
2.7
2.6
791
907
542
596
2
2
2
2
110
132
160
200
150
180
220
270
2970
2970
2970
2975
353.7
424.4
514.5
642.0
93.7
93.6
94.1
94.1
94.6
94.9
95.2
95.3
94.8
95.3
95.3
95.4
0.90
0.90
0.91
0.90
186.0
222.1
266.3
336.2
7.7
7.6
7.8
7.9
2.0
2.0
2.0
2.0
1.8
1.8
1.8
1.8
2.3
2.3
2.3
2.3
1702
1908
2117
2438
922
1010
1085
1220
AMHE 315S G
AMHE 315M G
AMHE 315M RG
AMHE 315L G
High Efficiency
Three-phase motors
IE2
High efficiency motors, IE2 code


Type
kW
HP
min-1
MN
Nm 50%
[ T]
For mains voltage

400 V - 50 Hz

IE2
75%
cos
100%
IN
400V 10-3 kgm2 kg

AMHE 80Z AA
0.75
1430
79.2
80.3
80.2
0.76
1.8
5.5
2.8
2.7
2.5
11.0
AMHE 90S AA
AMHE 90L BA
4
4
1.1
1.5
1.5
2
1430
1430
7.3
10
81.4
82.0
82.7
83.5
82.5
83.0
0.77
0.77
2.5
3.4
6.1
6.4
4.0
3.9
3.9
3.8
4.1
4.0
3.73
3.73
16.4
16.4
AMHE 100L AA 4
AMHE 100L BA 4
2.2
3
3
4
1450
1440
14.5
19.9
84.0
85.3
85.3
86.6
85.1
86.4
0.74
0.77
5.1
6.5
6.0
6.3
3.2
3.4
3.0
3.1
3.4
3.6
5.58
7.3
22.4
26.5
AMHE 112M AA 4
5.5
1450
26.3
86.0
87.3
87.1
0.78
8.5
6.1
3.1
2.8
3.3
13.3
30.4
AMHE 132S RA 4
AMHE 132M TA 4
5.5
7.5
7.5
10
1450
1450
36.2
49.4
87.5
88.5
88.3
89.4
88.1
89.2
0.84
0.85
10.8
14.4
7.4
7.4
3.0
3.0
2.4
2.4
3.3
3.3
30.0
36.0
55.0
65.0
AMHE 160M ZA 4
AMHE 160L ZA 4
11
15
15
20
1460
1460
71.9
98.1
89.4
90.6
90.3
91.2
90.1
91.0
0.82
0.84
22.0
29.0
6.9
7.4
2.3
2.5
2.1
2.2
2.9
3.1
105.0
120.7
108.0
114.0
156
175
160
175
281
238
487
575
305
310
728
412
1741
2037
560
665
4026
4387
4968
6488
910
1120
1185
1340
AMHE 180M ZG 4
18.5
25
1455
121.4
90.9
91.6
91.4
0.85
34.4
7.8
2.4
2.1
3.0
AMHE 180L ZG 4
22
30
1460
143.9
91.1
92.0
91.6
0.84
41.3
7.5
2.3
2.0
3.0

AMHE 200L RG 4
30
40
1460
196.2
90.2
92.8
92.5
0.88
53.2
7.9
2.4
2.0
2.7

AMHE 225S PG 4
37
50
1470
240.4
92.3
92.9
92.8
0.83
69.3
6.7
2.4
2.0
2.7
AMHE 225M PG 4
45
60
1480
290.4
92.5
93.2
93.3
0.83
83.9
7.0
2.3
2.0
2.8

AMHE 250M PG 4
55
75
1480
354.9
93.1
94.0
93.8
0.87
97.3
7.4
2.4
1.9
2.7

AMHE 280S G
4
75
100
1480
483.9
93.2
94.5
94.4
0.90
127.4
7.5
2.2
1.9
2.6
AMHE 280M G 4
90
125
1480
580.7
93.4
94.8
94.7
0.90
152.4
7.7
2.2
1.9
2.6

AMHE 315S G
4
110
150
1480
709.8
93.9
95.0
94.9
0.89
188.0
7.8
2.0
1.8
2.3
AMHE 315M G 4
132
180
1480
851.8
94.0
95.2
95.1
0.90
222.6
7.8
2.0
1.8
2.3
AMHE 315M RG 4
160
220
1480 1032.4
94.2
95.3
95.3
0.90
269.3
7.9
2.0
1.8
2.3
AMHE 315LG
4
200
270
1480 1290.5
94.3
95.4
95.4
0.90
336.2
7.7
2.0
1.8
2.3
[44]
[45]
[ T]
High Efficiency
Three-phase motors
High efficiency motors, IE2 code


Type
kW
HP
min-1
MN
Nm 50%
IE2
For mains voltage

400 V - 50 Hz

IE2
75%
cos
100%
IN
400V 10-3 kgm2 kg

AMHE 90S AA 6
0.75
1
925
7.7
75.3
75.8
76.2
0.65
2.2
4.6
1.7
1.6
1.8
AMHE 90L BA
6
1.1
1.5
935
11.2
78.5
78.7
78.9
0.67
3.0
4.2
1.8
1.8
2.3

AMHE 100L AA 6
1.1
1.5
950
11.1
75.7
77.6
79.5
0.67
3.0
5.5
1.9
1.9
2.4
AMHE 100L BA 6
1.5
2
950
15.1
78.5
79.4
79.8
0.77
3.5
6.7
2.4
2.4
2.8

AMHE 112M AA 6
2.2
3
960
21.9
79.4
81.0
81.8
0.73
5.3
10.4
2.7
1.5
3.7

AMHE 132S YA 6
3
4
960
29.8
82.3
82.9
83.5
0.58
8.9
9.5
2.2
1.4
3.2
AMHE 132M YA 6
4
5.5
955
40.0
84.1
84.8
85.2
0.66
10.3
8.9
2.1
1.2
2.9
AMHE 132M TA 6
5.5
7.5
970
54.1
85.0
86.2
86.5
0.75
12.2
8.4
1.9
1.1
2.7

AMHE 160M YA 6
5.5
7.5
975
53.9
84.7
85.6
86.1
0.71
13.0
9.2
3.3
3.1
4.2
AMHE 160M ZA 6
7.5
10
970
73.8
85.8
87.3
87.5
0.78
15.8
7.7
3.0
2.8
3.8
AMHE 160L ZA 6
9.2
12.4
965
91.0
86.3
87.4
87.8
0.83
18.1
8.3
3.1
2.7
4.1
AMHE 160L TA 6
11
15
965
108.9
87.9
88.2
88.7
0.79
22.5
9.1
3.1
2.9
3.9
AMHE 180LZG 6
15
20
965
148.45
88.5
90.3
90.1
0.83
29.0
7.0
2.3
2.1
2.9

AMHE 200LPG 6
18.5
25
965
183.09
88.9
90.8
90.6
0.84
35.1
7.0
2.4
2.1
3.2
AMHE 200LRG 6
22
30
970
216.6
89.3
91.4
91.2
0.85
41.0
7.0
2.3
1.9
3.1

AMHE 225MPG 6
30
40
975
293.85
89.6
91.7
91.9
0.86
54.8
7.0
2.2
1.9
2.7

AMHE 250MPG 6
37
50
975
362.41
90.7
92.4
92.5
0.84
68.7
7.0
2.3
2.1
2.7

AMHE 280SG
6
45
60
980
438.52
91.6
92.9
92.9
0.85
82.3
7.0
2.3
2.0
2.8
AMHE 280MG 6
55
75
980
536.0
92.1
93.4
93.3
0.86
98.9
7.0
2.2
1.9
2.7

AMHE 315SG
6
75
100
985
727.16
93.1
93.8
93.8
0.87
132.7
7.0
2.1
1.9
2.5
AMHE 315MG 6
90
125
985
872.59
93.3
94.1
94.2
0.88
156.7
7.0
2.0
1.8
2.3
AMHE 315MRG 6
110
150
980 1071.94
93.2
94.5
94.6
0.89
188.6
6.7
2.0
1.8
2.3
AMHE 315LG
6
132
160
980 1286.33
93.7
94.7
94.8
0.88
228.4
6.7
2.0
1.8
2.3
4.78
6.45
15.0
20.3
7.48
11.6
19.4
27.1
18.7
39.0
37.7
44.4
54.1
55.8
65.5
64.1
75.2
103
125
156
70.5
96.6
103
129
285
172
405
471
225
275
801
312
992
386
1785
2208
560
593
4632
5525
6896
8023
741
920
1243
1428
IE2
High Efficiency
Three-phase motors
according to EPAct
Insulation class F
S.F. 1.15
Verified by UL Underwriters Laboratories Inc.

HP
min-1
MN
Nm
50%

75%

cos
100%

Type
kW
[ T]
For mains voltage

460 V - 60 Hz
IN
460V 10-3 kgm2 kg

AMH 90S AA
AMH 90L BA
2
2
1.5
2.2
2
3
3470
3500
4.1
6.0
83.8
85.4
84.9
86.6
84.3
86.3
0.88
0.84
2.7
3.9
7.7
7.5
3.1
4.4
3
4
3.6
4.4
1.6
1.8
14
16
AMH 100L AA
AMH 100L BA
2
2
2.2
3
3
4
3530
3525
6.0
8.1
86.5
86.4
87.9
87.8
87.8
87.7
0.84
0.82
3.9
5
11.5
10.5
4.7
5.6
4.1
5.3
5.5
5.8
3.3
4.0
19.7
22.8
AMH 112M AA 2
AMH 112M AA 2
AMH 112M BA 2*
3.7
4
5.5
5
5.5
7.5
3530
3540
3500
10.0
10.8
15.0
86.1
86.1
85.0
88.4
88.3
88.6
88.1
88.0
88.5
0.84
0.87
0.85
6.3
6.6
9.3
14.3
13.7
10.9
5.7
5.3
4.5
2.1
1.9
2.48
5.8
5.4
4.3
8.6
8.6
8.6
33.6
33.6
34
AMH 132S ZA 2
AMH 132S TA 2
AMH 132M TA 2
5.5
7.5
9.2
7.5
10
12.4
3520
3510
3520
14.9
20.4
25.0
86.1
89.7
88.8
88.2
90.1
89.9
88.5
89.5
89.5
0.87
0.91
0.91
9.2
11
14
7.9
8.1
8.1
3.3
3.4
3.3
2.9
2.9
2.9
3.7
3.9
3.9
20.5
20.5
25
53
53
59
AMH 160M YA 2
AMH 160M ZA 2
AMH 160L ZA 2
11
15
18.5
15
20
25
3550
3545
3550
29.6
40.4
49.8
90.1
91.2
91.5
91
89.9
92
91.0
91.0
91.7
0.88
0.88
0.87
17.3
23.5
28.8
8.7
8.7
8.9
2.8
2.8
2.8
2.2
2.2
2.2
3.6
3.6
3.6
51.7
64
64
87.8
104
105
HP
min-1
MN
Nm
50%

75%

cos
100%

Type
kW
IN
460V 10-3 kgm2 kg

AMH 90L AA
AMH 90L BA
AMH 90L CA
4
4
4
1.1
1.5
1.8
1.5
2
2.4
1745
1735
1720
6.0
8.3
10.0
82.2
82.1
82.2
84.2
84.4
84.3
84.2
84.4
84.3
0.76
0.73
0.77
2.1
3.1
3.4
7.2
7.5
7.4
3.8
4
4.4
4
3.9
3.3
4.6
4.2
4
3.7
3.7
3.7
16.4
16.4
16.4
AMH 100L AA
AMH 100L BA
4
4
2.2
3
3
4
1750
1740
12.0
16.5
85.8
85.7
87.6
87.7
87.5
87.6
0.70
0.76
4.6
5.6
6.5
7.4
3.8
3
3.1
2.8
3.9
3.2
5.6
7.3
22.4
26.5
AMH 112M AA 4
AMH 112M AA 4
3.7
4
5
5.5
1750
1745
20.2
21.9
86.3
86.5
87.9
88.1
87.8
88.0
0.79
0.81
6.8
7
6.9
6.7
4.2
3.9
3.5
3.2
4.5
4.2
13.3
13.3
30.4
30.4
AMH 132S ZA 4
AMH 132M ZA 4
AMH 132M TA 4
5.5
7.5
9.2
7.5
10
12.4
1755
1750
1745
29.9
40.9
50.3
88.8
89.5
89.2
89.8
90.2
90
89.5
89.5
89.5
0.84
0.84
0.84
9.4
12.4
16
7.9
8.1
8.3
3.4
3.5
3.6
2.8
2.9
2.9
3.7
3.8
3.9
30
36
36
56
65
65
AMH 160M ZA
AMH 160L ZA
11
15
15
20
1770
1770
59.3
80.9
90.8
91.4
91.4
91.6
91.0
91.0
0.84
0.84
18.5
24
8.6
8.2
3.2
3.2
2.3
2.3
3.4
3.4
105.7
120.7
108
114
4
4
[46]
[47]
[ T]
Premium Efficiency
Three-phase motors
Premium efficiency motors, IE3 code


Type
kW
HP
min-1
MN
Nm 50%
IE3
For mains voltage

400 V - 50 Hz

IE2
75%
cos
100%
IN
400V 10-3 kgm2 kg

AMPE 90S AA
2
1.5
2
2910
4.9
80.1
83.8
85.0
0.72
3.5
9.1
3.9
4.3
4.6
AMPE 90L BA
2
2.2
3
2865
7.3
84.8
85.6
86.0
0.86
4.3
7.9
4.5
4.2
4.7

AMPE 100L AA 2
3
4
2900
9.9
84.6
86.8
87.1
0.85
5.8
10.9
5.5
3.5
4.5

AMPE 112M AA 2
3.7
5
2950
12.0
86.3
88.9
89.9
0.83
7.1
12.8
5.2
2.3
3.8
AMPE 112M BA 2
4
5.5
2945
13.0
86.9
88.4
90.1
0.85
7.5
12.6
4.7
2.3
3.8
AMPE 112M CA 2
5.5
7.5
2935
17.9
85.6
88.3
89.2
0.78
11.3
11.7
4.7
2.7
4

AMPE 132S ZA 2
5.5
7.5
2920
18.0
88.2
89.7
89.8
0.88
10.0
7.7
3.2
2.9
3.6
AMPE 132S TA 2
7.5
10
2930
24.4
89.4
91.0
91.1
0.88
13.5
7.7
3.6
3.3
4.2
AMPE 132M TA 2
9.2
12.4 2935
29.9
89.4
91.0
91.2
0.85
17.0
9.7
4.2
3.9
5.1
AMPE 132M RA 2
11
15
2935
35.8
89.2
90.8
91.2
0.81
21.4
9.5
4.2
3.7
4.9

AMPE 160M YA 2
11
15
2935
35.8
88.7
90.5
91.2
0.89
19.5
11.1
3.7
2.7
4.7
AMPE 160M ZA 2
15
20
2945
48.6
89.5
91.4
92.0
0.88
26.7
12.5
4.6
3.3
5.9
AMPE 160L ZA 2
18.5
25
2945
60.0
89.7
91.7
92.4
0.82
35.3
12.8
4.9
3.5
6.3
AMPE 160L TA 2
22
30
2930
71.7
91.6
92.6
92.7
0.85
40.2
10.9
4.1
3.0
5.3
1.6
1.8
14
16
22.8
8.6
8.6
8.6
33.6
33.6
33.6
20.5
22.8
25
25
53
56
59
59
51.7
64
64
64
87.8
104
104
104
For dimensions AMPE 2 poles motors, please see dimensions AMHE motors

Type
kW
HP
min-1
MN
Nm 50%
IE2
75%
cos
100%
IN
400V 10-3 kgm2 kg

AMPE 90S AA
4
1.1
1.5
1445
7.3
82.3
85.2
85.8
0.70
2.6
8.5
4.6
4.5
4.9
AMPE 90L BA
4
1.5
2
1420
10.1
84.7
85.4
85.7
0.76
3.3
7.8
4.1
4.0
4.3
AMPE 90L CA
4
1.8
2.4
1420
12.1
83.8
84.9
85.3
0.70
4.3
8.0
4.1
4.0
4.3

AMPE 112M AA 4
3.7
5
1450
24.4
87.7
88.6
88.8
0.80
7.5
9.9
3.3
2.7
4.9
AMPE 112M BA 4
4
5.5
1445
26.4
87.9
88.5
88.8
0.82
7.9
9.3
3.1
2.4
4.6

AMPE 132S ZA 4
5.5
7.5
1450
36.2
90.6
91.0
91.2
0.82
10.6
9.4
3.7
3.2
4.3
AMPE 132M ZA 4
7.5
10
1465
48.9
89.8
91.2
91.5
0.68
17.5
9.7
4.4
3.7
5.1
AMPE 132M TA 4
9.2
12.4 1455
60.4
90.6
91.2
91.3
0.74
19.7
9.8
4.9
4.2
5.8

AMPE 160M ZA 4
11
15
1470
71.5
92.2
92.6
92.9
0.79
21.6
10.1
4.6
3.3
4.9
AMPE 160L ZA 4
15
20
1465
97.8
92.1
92.5
92.8
0.78
29.9
10.1
4.4
3.2
4.7
For dimensions AMPE 4 poles motors, please consult us
3.7
3.7
3.7
16.4
16.4
16.4
16.4
16.4
36
36
36
45
57
65
79
98
120.7
135
114
120
IE3
Premium Efficiency
Three-phase motors
according to EISA
For mains voltage

460 V - 60 Hz
Verified by UL Environment

Type
kW
HP
min-1
[ T]

MN
Nm
50%

75%

cos
100%
IN
460V 10-3 kgm2 kg

AMPH 90S AA 2
1.5
2
3515
4.1
81.2
84.7
85.5
0.78
2.8
8.9
3.7
3.6
4.3
AMPH 90L BA 2
2.2
3
3480
6.0
83.6
86.1
86.5
0.84
3.8
7.7
4.4
4.0
4.4

AMPH 100L AA 2
3
4
3515
8.2
85.8
88.1
88.5
0.86
4.9
10.6
5.6
5.3
5.3

AMPH 112M AA 2
3.7
5
3550
10.0
84.0
87.6
88.5
0.86
6.1
12.5
5.1
1.9
5.2
AMPH 112M BA 2
4
5.5
3540
10.8
85.3
88.0
88.5
0.87
6.5
12.3
4.7
1.7
4.8
AMPH 112M CA 2
5.5
7.5
3530
14.9
86.2
89.0
89.5
0.86
8.9
11.4
4.5
2.5
4.3

AMPH 132S ZA 2
5.5
7.5
3540
14.8
87.3
89.6
89.5
0.88
8.8
7.5
3.0
2.6
3.3
AMPH 132S TA 2
7.5
10
3540
20.2
88.0
90.3
90.2
0.87
12.0
7.5
3.4
2.9
3.9
AMPH 132M TA 2
9.2
12.4
3545
24.8
87.7
90.1
90.2
0.88
14.5
9.4
4.0
3.5
4.7
AMPH 132M RA 2
11
15
3535
29.7
87.5
90.4
91.0
0.86
17.7
9.2
4.0
3.5
4.7

AMPH 160M YA 2
11
15
3550
29.6
86.6
90.0
91.0
0.89
17.0
10.8
3.5
2.5
4.5
AMPH 160M ZA 2
15
20
3555
40.3
90.1
92.0
91.0
0.85
24.4
12.2
4.4
3.1
5.6
AMPH 160L ZA 2 18.5
25
3555
49.7
90.0
92.2
91.7
0.82
31.0
12.5
4.6
3.3
6.0
AMPH 160L TA 2
22
30
3540
59.3
90.7
92.5
91.7
0.84
35.8
10.6
3.9
2.8
5.0
1.6
1.8
14.0
16.0
4.0
22.8
8.6
8.6
8.6
33.6
33.6
33.6
20.5
22.8
25.0
25.0
53.0
56.0
59.0
59.0
51.7
64.0
64.0
64.0
87.8
104
104
104
For dimensions AMPH 2 poles motors, please see dimensions AMH motors

Type
kW
HP
min-1
MN
Nm
50%

75%

cos
100%
IN
460V 10-3 kgm2 kg

AMPH 90S AA 4
1.1
1.5
1745
6.0
82.8
85.6
86.5
0.71
2.2
8.2
4.4
4.3
4.6
AMPH 90L BA 4
1.5
2
1735
8.2
83.5
86.2
86.5
0.74
2.9
7.5
3.8
3.7
4.0
AMPH 90L CA 4
1.8
2.4
1730
9.9
85.2
86.7
86.5
0.68
3.8
7.8
3.9
3.8
4.1

AMPH 112M AA 4
3.7
5
1765
20.0
87.3
89.3
89.5
0.80
6.5
9.6
3.1
2.5
4.6
AMPH 112M BA 4
4
5.5
1760
21.7
87.7
89.4
89.5
0.81
6.9
9.0
2.9
2.3
4.3

AMPH 132S ZA 4
5.5
7.5
1760
29.9
91.0
92.1
91.7
0.81
9.3
9.1
3.5
3.0
4.1
AMPH 132M ZA 4
7.5
10
1760
40.7
90.8
91.5
91.7
0.79
13.0
9.4
4.1
3.5
4.8
AMPH 132M TA 4
9.2
12.4
1760
49.9
90.9
91.6
91.7
0.73
17.2
9.5
4.7
4.0
5.5

AMPH 160M ZA 4
11
15
1770
59.4
91.5
92.5
92.4
0.80
18.7
9.8
4.4
3.1
4.6
AMPH 160L ZA 4
15
20
1765
81.2
92.4
93.0
93.0
0.77
26.3
9.8
4.2
3.0
4.4
3.7
3.7
3.7
16.4
16.4
16.4
16.4
16.4
36.0
36.0
36.0
45.0
57.0
65.0
79.0
98.0
120.7
135.0
114
120
For dimensions AMPH 4 poles motors, please consult us
[48]
[49]
[ T]
For mains voltage

to IEC 60038
400 V 10% - 50 Hz
Three-phase pole-changing motors

designed for range of rated voltage
380-420 V 5% - 50 Hz

Type
kW
HP
min-1
MN
Nm

cos
100%

IN
IA/IN
MA/MN
400V 380-420V
10-3 kgm2 kg
1500/3000 min-1 (4/2 poles) - Dahlander connection /YY

AM 63Z AA
4/2
0.20/0.30 0.27/0.40
1345/2700
1.4/1.1
56/65
0.65/0.81
0.8/0.83
0.89/0.88
2.4/3.2
2.1/2.1
0.40
4.6
AM 71Z AA
4/2
0.30/0.45 0.40/0.65
1374/2830
2.1/1.5
61/66
0.78/0.73
1.0/1.35
1.2/1.5
3.3/3.0
2.3/2.1
0.76
6.3
AM 80Z AA
AM 80Z BA
AM 80Z CA
4/2
4/2
4/2
0.45/0.60 0.65/0.80
0.55/0.75 0.75/1.0
0.8/1.1
1.1/1.5
1390/2760
1435/2850
1425/2830
3.1/2.1
3.7/2.5
5.4/3.7
64/68.8
70/71.2
76.1/77.2
0.75/0.80
0.67/0.77
0.70/0.79
1.4/1.6
1.7/2.0
2.2/2.6
1.5/1.7
1.8/2.1
2.5/2.8
3.8/4.0
4.5/5.0
4.5/4.9
2.3/2.2
2.6/2.8
2.5/2.7
1.58
2.00
2.41
8.3
11.5
14.7
AM 90L AA
AM 90L BA
4/2
4/2
1.2/1.55
1.6/2.0 1)
1.6/2.1
1435/2850
2.15/2.7 1) 1390/2810
8/5.2
11/6.8
77.4/78.3
73.5/75.5
0.71/0.79
0.78/0.86
3.2/3.7
4.0/4.6
3.4/3.9
4.1/4.7
4.7/5.1
4.1/5.5
2.6/2.7
2.7/2.6
3.10
3.73
15.6
17.1
AM 100L AA 4/2
AM 100L BA 4/2
AM 100L CA 4/2
1.8/2.5
2.2/3.0
2.6/3.3
2.5/3.35
3.0/4.0
3.5/4.4
1420/2865
1410/2830
1430/2890
12.1/8.3
14.9/10.1
17.4/10.9
78.5/77.4
74.6/71.4
82.6/78.6
0.76/0.84
0.72/0.82
0.78/0.76
4.5/5.6
5.9/7.4
5.9/8.0
4.7/5.8
6.1/7.7
6.1/8.5
5.2/5.5
4.2/4.3
4.7/5.5
2.2/2.2
1.8/2.0
1.9/2.2
4.60
4.60
5.58
21.4
22.5
23.2
AM 112M AA 4/2
3.3/4.4
4.4/5.9
1410/2800
22.4/15
77.4/75.4
0.82/0.85
7.5/9.9
7.8/10.6
4.5/5.1
2.1/2.4
13.30
36.1
AM 132S ZA 4/2
AM 132M ZA 4/2
4.4/5.5
6.6/8.1
6.0/7.5
9.0/11.0
1450/2925
1460/2920
29/18
43.2/26.5
83.0/84.6
85.4/84.5
0.70/0.87 11.0/10.8 12.0/11.8 4.4/7.2

0.76/0.90 14.7/15.4 15.5/16.4 5.5/7.5
2.2/2.7 13.83 42.6

2.6/2.9 17.13 51.4
8.8/11.0 12.0/15.0 1460/2940

12.5/15.0 17.0/20.4 1470/2955
57.6/35.7
81.2/48.5
87.1/87.5
89.4/90.0
0.79/0.91 18.5/20.0 19.0/21.0 5.5/7.5

0.74/0.90 27.4/26.8 29.0/28.2 4.8/7.4
2.0/1.9 51.75 94.0

2.1/2.3 64.00 108.7
MN
Nm

cos
100%
AM 160M ZA 4/2
AM 160L ZA 4/2

Type
kW
HP
min-1

IN
IA/IN
MA/MN
400V 380-420V
10-3 kgm2 kg
750/1500 min-1 (8/4 poles) - Dahlander connection /YY

AM 71Z AA
8/4
0.09/0.15 0.12/0.20
610/1310
1.4/1.1
40/56
0.61/0.75
0.53/0.52
0.59/0.57
2.5/3.2
1.6/1.6
0.71
6.3
AM 80Z AA
AM 80Z BA
8/4
8/4
0.18/0.37 0.25/0.50
0.26/0.51 0.35/0.68
700/1370
700/1360
2.5/2.6
3.5/3.6
43.2/58.7
44.1/61.2
0.63/0.83
0.60/0.88
1.0/1.1
1.2/1.4
1.1/1.2
1.3/1.5
2.6/3.4
2.5/3.6
1.8/1.6
2.0/1.6
1.97
2.47
7.9
9.2
AM 90S AA
AM 90L BA
8/4
8/4
0.37/0.75 0.50/1.0
0.5/1.0 0.67/1.34
690/1385
690/1410
5.1/5.2
6.9/6.8
52.2/67.1
52.2/72.5
0.58/0.82
0.58/0.80
1.8/2.0
2.4/2.4
1.9/2.1
2.5/2.5
2.8/3.9
3.3/4.0
1.9/1.8
2.3/1.9
3.18
4.78
13.5
15.7
AM 100L AA 8/4
AM 100L BA 8/4
0.7/1.4 0.94/1.9 700/1440

0.9/1.8 1) 1.2/2.5 1) 690/1415
9.5/9.3
12.5/12.1
57.2/78.5
62/76
0.50/0.78
0.56/0.87
3.5/3.3
3.8/4.0
3.7/3.4
4.0/4.3
2.8/4.3
2.5/4.5
2.1/1.9
1.9/1.8
5.58
6.00
21.9
23.7
AM 112M AA 8/4
AM 112M BA 8/4
1/1.8
1.34/2.5 710/1445
1.3/2.6 1) 1.75/3.0 1) 705/1420
13.5/11.9
17.6/17.5
66.1/78.5
70.0/76.3
0.61/0.82
0.65/0.88
4.1/4.1
4.6/5.7
4.4/4.2
4.8/5.9
3.9/6.3
3.2/4.8
2.2/2.1
2.1/2.0
14.18
16.70
31.7
34.2
AM 132S ZA 8/4
AM 132M ZA 8/4
2.1/3.7
2.6/4.8
2.9/5.0
3.5/6.5
710/1440
715/1450
28.2/24.5
34.7/31.6
70.2/76.1
71.6/78.8
0.66/0.84
0.60/0.80
6.5/8.4
8.8/11.0
6.7/8.6
9.8/12.0
4.0/5.2 1.9/1.7
4.3/5.5 2.3/1.8
29.50
37.75
42.5
55.5
AM 160M YA 8/4
AM 160L YA 8/4
AM 160L ZA 8/4
4.0/6.3 5.5/8.6
4.8/7.5 6.5/10.0
5.9/10.3 8.0/14.0
710/1410
730/1470
725/1450
53.8/42.7
62.8/48.7
77.7/67.8
80.0/81.0
80.0/85.0
81.0/87.0
0.64/0.88
0.65/0.85
0.66/0.88
11.3/12.8 12.3/13.5
13.2/15.0 14.0/16.0
16.1/19.5 17.0/20.4
4.6/6.5 1.8/ 1.7 81.25 88.5

4.5/6.5 1.8/1.6 105.75 106.5
5.0/6.0 1.9/1.6 127.50 110.5
For mains voltage

to IEC 60038
400 V 10% - 50 Hz
Three-phase pole-changing motors

designed for range of rated voltage
380-420 V 5% - 50 Hz
[ T]

Type
kW
HP
min-1
MN
Nm

cos
100%

IN
IA/IN
MA/MN
400V 380-420V 10-3 kgm2 kg
1500/1000 min-1 (4/6 poles) - separate windings

AM 71Z AA
4/6 0.22/0.15 0.30/0.20
1430/900
1.5/1.6
61/44
0.7/0.64
0.78/0.68
0.83/0.73
1.9/3.4
1.5/1.8
0.73
6.2
AM 80Z AA
AM 80Z BA
4/6 0.37/0.26 0.50/0.35

4/6 0.55/0.37 0.75/0.50
1385/905
1380/900
2.6/2.7
3.8/3.9
61.4/48.1
60.5/51.1
0.82/0.80
0.64/0.82
1.1/1.0
1.5/1.3
1.1/1.1
1.6/1.4
3.7/2.6
3.7/2.7
1.7/1.3
1.6/1.2
1.97
2.47
8.3
10.0
AM 90S AA
AM 90L BA
4/6
4/6
0.75/0.5
1/0.65
1.0/0.67
1.34/0.87
1400/930
1380/920
5.1/5.1
6.9/6.7
63/64
68.8/67.1
0.81/0.61
0.81/0.62
2.2/1.9
2.6/2.3
2.3/2.1
2.8/2.5
3.0/3.5
2.9/3.4
1.4/1.8
1.1/1.6
4.10
4.78
13.4
16.4
AM 100L AA 4/6
AM 100L BA 4/6
1.2/0.8
1.6/1.0
1.6/1.07
2.15/1.34
1460/940
1445/935
7.8/8.1
10.6/10.2
76.0/67.9
77.6/69.5
0.66/0.70
0.73/0.63
3.5/2.5
4.1/3.3
3.8/2.6
4.3/3.5
4.7/3.0
5.8/3.0
2.1/1.5
2.8/1.7
4.60
5.58
24.4
33.2
AM 112M AA 4/6
AM 112M BA 4/6
1.8/1.3
2.6/1.85
2.5/1.75
3.5/2.5
1445/950
1445/950
11.9/13.1
17.2/18.6
74.6/69.5
73.8/71.6
0.85/0.78
0.86/0.73
4.2/3.6
6.0/5.2
4.4/3.7
6.2/5.4
5.9/3.8
6.1/4.4
1.9/1.3
2.0/1.7
14.18
17.53
33.3
37.0
AM 132S ZA 4/6
AM 132M ZA 4/6
3.1/2.2
4.0/2.6
4.2/3.0
5.5/3.5
1440/965
1470/975
20.6/21.8
26/25.5
80/78
81.0/79.3
0.80/0.74
0.83/0.74
7/5.5
8.6/6.4
7.5/6
9.3/7.0
5.8/5.6
7.7/5.2
2.1/2.0
2.0/1.9
22.4 41.9
29.25 51.0
AM 160M YA 4/6
AM 160M ZA 4/6
AM 160L ZA 4/6
5.5/3.7
7.5/4.8
11.0/6.6
7.5/5.0
10.2/6.5
15.0/9.0
1480/970
1465/960
1470/960
35.5/36.4
48.9/47.7
71.5/65.7
84.0/81.4
85.0/82.6
86.0/83.8
0.79/0.73
0.83/0.75
0.86/0.75
7.5/4.5
7.4/4.6
7.2/5.0
2.5/1.6 81.25 88.5

2.4/1.6 81.25 88.5
2.3/1.8 105.75 106.5

Type
kW
HP
min-1
MN
Nm

cos
100%
12.0/9.0 12.9/9.6
15..4/11.2 15.8/11.5
21.6/15.2 22.5/16.0

IN
IA/IN
MA/MN
400V 380-420V
10-3 kgm2 kg

AM 80Z AA
6/8
0.37/0.18 0.50/0.25
915/700
3.9/2.5
51.1/44.2
0.81/0.65
1.3/1.0
1.4/1.0
2.8/2.5
1.4/1.7
2.47
9.5
AM 90L AA
6/8
0.55/0.30 0.75/0.40
950/710
5.5/4
65.2/45.1
0.62/0.52
2.0/1.8
2.1/1.9
3.9/2.6
2.5/1.9
4.78
16.2
AM 100L AA 6/8
0.75/0.45
1.0/0.60
960/720
7.5/6
72.6/61.8
0.67/0.54
2.2/2.0
2.3/2.1
4.1/2.9
1.9/1.9
6.73
23.4
AM 112M AA 6/8
AM 112M BA 6/8
0.95/0.65
1.5/0.75
1.3/0.90
2.0/1.0
965/715
970/720
9.4/8.7
14.8/9.9
65.2/62.1
75.3/64.6
0.78/0.70
0.66/0.60
3.0/2.2
4.4/2.8
3.2/2.3
4.6/3.0
4.5/3.8
4.6/3.8
1.4/1.7
2.2/2.1
14.18
18.70
32.0
36.2
AM 132S ZA 6/8
AM 132M ZA 6/8
2.2/1.2
3.0/1.7
3.0/1.6
4.1/2.3
970/730
980/730
21.7/15.7
29.2/22.2
73.5/66.0
78.2/72.5
0.69/0.60
0.72/0.64
6.3/4.4
7.7/5.3
6.6/4.8
8.2/5.9
4.5/3.7
5.4/4.3
1.6/1.7
1.7/1.7
29.5
37.75
42.5
55.5
AM 160M YA 6/8
AM 160M ZA 6/8
4.8/2.6
5.9/3.3
6.5/3.5
8.0/4.5
970/730
970/730
47.3/34
58.1/43.2
83.0/74.0
83.2/73.0
0.80/0.70 10.5/7.3 11.0/7.7 4.8/3.6

0.76/0.60 13.5/10.9 14.5/11.4 6.5/5.0
1.9/1.8 112.7
2.2/2.1 150.25
88.0
97.5
[50]
[51]
[ T]
For mains voltage

to IEC 60038
400 V 10% - 50 Hz
Three-phase pole-changing motors designed

380-420 V 5% - 50 Hz

Type
kW
min-1
HP
MN
Nm

cos
100%

IN
IA/IN
MA/MN
400V 380-420V
10-3 kgm2 kg
1500/3000 min-1 (4/2 poles) - Dahlander connection Y/YY

AMV 63Z AA
4/2
0.07/0.33
0.095/0.45
1350/2700
0.5/1.2
55/60
0.70/0.80
0.25/0.95
0.27/1.1
2.5/2.6
1.8/1.6
0.37
5.0
AMV 71Z AA
AMV 71Z BA
4/2
4/2
0.08/0.37
0.12/0.55
0.11/0.5
0.16/0.75
1350/2870
1430/2835
0.6/1.2
0.8/1.9
60/64
70/68
0.65/0.68
0.65/0.72
0.30/1.3
0.40/1.6
0.35/1.4
0.42/1.7
3.2/4.3
4.1/4.0
2.0/2.8
3/2.8
0.82
1.08
7.9
10.0
AMV 80Z AA
AMV 80Z BA
4/2
4/2
0.15/0.75
0.22/1.1
0.2/1.0
0.3/1.5
1400/2710
1420/2820
1/2.6
1.5/3.7
70/68
70/73
0.68/0.80
0.75/0.84
0.45/1.9
0.6/2.5
0.45/2.0
0.65/2.6
2.6/4.6
4.6/4.7
2.8/2.9
2.7/2.9
1.58
2.0
8.3
11.5
AMV 90L AA
AMV 90L BA
4/2
4/2
0.30/1.5
0.44/2.2
0.4/2.0
0.6/3.0
1400/2830
1430/2830
2/5.1
2.9/7.4
69/70
74/72
0.70/0.84
0.76/0.89
0.9/3.5
1.1/4.8
1.0/3.7
1.2/5.0
4.7/5.0
4.5/5.2
2.7/3.0
2.6/2.8
3.13
3.73
15.6
17.1
AMV 100L AA
AMV 100L BA
4/2
4/2
0.50/2.5
0.60/3.0
0.67/3.3
0.8/4.0
1430/2840
1440/2850
3.3/8.4
4/10.1
72/73
78/77
0.77/0.88
0.79/0.87
1.3/5.3
1.3/6.2
1.4/5.6
1.4/6.5
4.6/5.0
4.5/4.5
2.2/2.3
2.2/2.1
4.6
5.58
21.4
23.2
AMV 112M AA 4/2

AMV 112M BA 4/2
0.75/3.70
0.9/4.5
1.0/5.0
1.2/6.1
1440/2850
1440/2850
5/12.4
6/15.1
74/72
75/73
0.80/0.90
0.82/0.90
1.7/7.9
2.0/9.5
1.9/2.2
2.1/9.8
4.5/5.1
4.5/5.5
2.0/2.4
2.0/2.3
13.3
14.75
36.1
40.0
AMV 132S AA 4/2

AMV 132S BA 4/2
AMV 132M CA 4/2
1.1/5.5
1.5/7 1)
1.9/8.0
1.5/7.5
2/9.5 1)
2.6/10.9
1440/2880
1440/2900
1450/2930
7.3/18.2
9.9/23.1
12.5/26.1
81.5/84.8
82.0/86.0
83.7/88.0
0.78/0.90
0.78/0.92
0.82/0.87
2.5/10.4
3.4/12.8
4.0/15.1
2.6/11.0
3.8/13.0
4.0/16.0
5.0/6.0
5.3/6.5
5.5/7.0
2.1/2.8
2.2/2.9
2.2/3.0
13.83
13.83
17.13
42.6
42.6
51.4
AMV 160M AA 4/2

AMV 160M BA 4/2
AMV 160L CA 4/2
2.8/11
3.3/13.5 1)
4.4/18.5 1)
3.8/15.0
4.5/18.3 1)
6.0/25.1 1)
1440/2940
1440/2920
1450/2940
18.6/35.7
21.9/44.2
29/60.1
82.5/88.2
83.0/88.5
85.5/89.5
0.78/0.90
0.80/0.92
0.83/0.92
6.3/20.0
7.2/24.0
9.0/32.5
7.0/20.4
7.5/24.0
9.5/33.0
5.0/7.5
5.5/7.5
5.5/7.5
2.0/2.1
2.0/2.2
2.0/2.2
51.75
51.75
64.0
94
94
108.7
MN
Nm

cos
100%

Type
kW
HP
min-1

IN
IA/IN
MA/MN
400V 380-420V
10-3 kgm2 kg
750/1500 min-1 (8/4 poles) - Dahlander connection Y/YY

AMV 71Z AA
8/4
0.08/0.37
0.11/0.5
660/1370
1.2/2.6
26/57
0.63/0.72
0.60/1.25
0.65/1.35
2.8/3.4
1.9/1.7
1.24
6.8
AMV 80Z AA
AMV 80Z BA
8/4
8/4
0.12/0.55
0.18/0.75
0.16/0.75
0.25/1.0
685/1420
660/1380
1.7/3.7
2.6/5.2
50/69
53/67
0.60/0.74
0.73/0.81
0.58/1.53
0.65/1.9
0.65/1.6
0.7/2.0
1.9/3.3
2.0/3.5
1.4/1.5
1.6/1.7
2.47
2.41
9.2
10.6
AMV 90L AA
AMV 90L CA
8/4
8/4
0.18/1.1
0.4/1.6
0.25/1.5
0.54/2.15
680/1400
675/1400
2.5/7.5
5.7/10.9
60/70
61.5/75
0.65/0.82
0.64/0.79
0.9/2.7
1.8/4.0
1.0/2.8
1.8/4.1
2.8/4.0
3.1/5.0
1.5/2.0
1.6/2.2
2.98
3.70
15.7
19.6
AMV 100L AA
AMV 100L BA
8/4
8/4
0.45/2.2
0.6/2.6
0.60/3.0
0.80/3.5
680/1420
680/1435
6.3/14.8
8.4/17.3
63.1/75.3
64.0/76.2
0.60/0.80
0.63/0.75
1.7/5.0
2.2/6.5
1.9/5.3
2.3/6.7
2.7/4.7
2.7/4.8
1.7/2.0
1.7/2.2
5.58
6.00
21.9
23.7
AMV 112M AA 8/4

AMV 112M CA 8/4
0.7/3.3
1.0/4.0
0.94/4.5
1.34/5.5
690/1420
720/1420
9.7/22.2
13.3/26.9
62/78
60/77
0.70/0.80
0.70/0.82
2.2/7.4
3.1/8.6
2.3/7.6
3.3/9.0
3.4/6.5
3.5/5.0
1.8/2.4
2.3/1.9
16.70
19.50
34.2
40.0
AMV 132S AA 8/4

AMV 132M BA 8/4
AMV 132M CA 8/4
1.1/4.5
1.4/5.5
1.8/7.5
1.5/6.1
1.9/7.5
2.4/10.2
725/1450
720/1440
720/1450
14.5/29.6
18.6/36.5
23.9/49.4
77.0/85.5
78.0/86.0
78.2/86.5
0.58/0.82
0.62/0.82
0.64/0.86
3.6/9.3
4.2/11.3
5.2/14.6
4.0/9.7
4.5/12
5.5/15.0
3.5/5.4
3.6/5.5
4.6/6.0
2.2/2.7
2.0/2.5
2.0/2.5
22.4
29.25
37.25
41.9
51.0
65.0
AMV 160M ZA
AMV 160L ZA
2.2/10.0 3.0/13.0 720/1450

3.2/15.0 1) 4.3/20.0 1) 720/1450
29.2/65.9
42.4/98.8
80.0/88.0
81.0/90.0
0.61/0.83
0.61/0.88
6.6/19.9
9.4/27.3
6.8/20.4
9.8/28
3.5/6.0
3.5/6.5
1.8/1.7
1.7/1.8
81.25 88.5
105.75 106.5
8/4
8/4
For mains voltage

to IEC 60038
400 V 10% - 50 Hz
Three-phase pole-changing motors for fan

drives designed for range of rated voltage
380-420 V 5% - 50 Hz
[ T]

Type
kW
HP
min-1
MN
Nm

cos
100%
IN
IA/IN
MA/MN
400V 380-420V
10-3 kgm2 kg

AMV 71Z AA
AMV 71Z BA
4/6
4/6
0.25/0.08
0.37/0.13
0.33/0.11
0.50/0.18
1370/900
1360/880
1.7/0.4
2.6/1.4
60/40
62/44
0.80/0.70
0.80/0.70
0.75/0.4
1.0/0.6
0.8/0.45
1.1/0.7
3.0/2.5
3.2/2.6
1.6/1.6
1.6/1.6
1.15
1.24
6.7
7.2
AMV 80Z AA
AMV 80Z BA
4/6
4/6
0.55/0.18
0.75/0.25
0.75/0.25
1.0/0.33
1380/920
1400/940
3.8/1.9
5.1/2.5
60/42
70/60
0.83/0.82
0.82/0.72
1.60/0.75
1.8/0.8
1.7/0.8
1.9/0.9
3.5/2.4
4.2/2.6
1.6/1.0
1.6/1.3
1.97
4.05
8.3
14
AMV 90S AA
AMV 90L BA
AMV 90L CA
4/6
4/6
4/6
0.75/0.24
1.1/0.37
1.5/0.5
1.0/0.32
1.5/0.50
2.0/0.67
1400/950
1400/930
1420/950
5.1/2.4
7.5/3.8
10.1/5
70/60
70/60
73/64
0.82/0.72
0.81/0.74
0.80/0.70
1.9/0.8
2.8/1.2
3.52/1.52
2.0/0.9
3.0/1.3
3.7/1.6
4.2/2.6
4.3/2.7
4.8/2.6
1.6/1.3
1.6/1.2
1.5/1.3
4.05
4.78
5.98
14
16.4
20.5
AMV 100L AA
AMV 100L BA
4/6
4/6
1.85/0.60
2.2/0.75
2.5/0.75
3.0/1.0
1400/920
1420/950
12.6/6.2
14.8/7.5
74/64
76/66
0.80/0.73
0.79/0.75
4.6/1.9
5.1/2.1
4.8/2.1
5.3/2.2
4.8/3.1
5.0/3.5
1.8/1.5
1.7/1.3
6.73
9.25
23.4
22.6
3/1.0
4.0/1.34
1440/970
19.9/9.8
80/73
0.81/0.65
6.6/3.0
6.8/3.2
5.8/4.6
2.5/2.1
13.3
30.4
5.2/1.8
6.0/2.0
7.5/2.4
8.6/3.0 1)
1460/970
1460/970
1460/970
1460/970
24.9/12.8
28.8/14.8
36/17.7
41.2/21.7
85.0/75.0
86.0/78.2
86.8/80.0
86.8/81.0
0.8/0.72
0.85/0.73
0.84/0.74
0.84/0.73
8.1/3.5
8.7/3.8
10.9/4.4
12.5/5.4
8.5/4
9.2/4.3
12.0/4.
13.5/5.
6.5/4.0
6.5/4.4
7.0/4.7
7.2/4.8
2.2/1.7
2.2/1.7
2.6/1.8
2.6/1.9
22.4
29.25
37.25
37.25
41.9
51.0
65.0
66.0
7.5/2.5
10.0/3.4
11.0/3.7 15.0/5.0
13.0/4.0 1) 17.7/5.4 1)
1470/975
1470/970
1460/970
48.7/24.5
71.5/36.4
85/39.4
87.5/83.0
88.0/84.2
88.0/84.5
0.83/0.75
0.81/0.73
0.81/0.72
14.9/5.8
22.5/8.7
26.3/9.5
15.6/6.0
23.4/9.0
27.5/10
8.3/4.5
8.0/4.8
8.0/4.8
2.5/1.9
2.4/1.8
2.4/1.9
81.25 88.5
105.75 106.5
105.75 106.5
AMV 112M AA 4/6

AMV 132S AA
AMV 132M BA
AMV 132M CA
AMV 132M DA
4/6
4/6
4/6
4/6
AMV 160M AA 4/6

AMV 160L BA 4/6
AMV 160L CA 4/6
3.8/1.3
4.4/1.5
5.5/1.8
6.3/2.2 1)

Type
kW
HP
min-1
MN
Nm

cos
100%

IN
IA/IN
MA/MN
400V 380-420V
10-3 kgm2 kg

AMV 80Z AA
AMV 80Z BA
6/8
6/8
0.25/0.11
0.37/0.15
0.33/0.15
0.50/0.25
930/720
920/715
2.6/1.5
3.8/2
53/49
52/47
0.79/0.62
0.81/0.63
0.9/0.55
1.3/0.8
1.0/0.7
1.4/0.9
2.9/3.0
2.8/2.8
1.6/1.8
1.4/1.9
1.97
2.47
7.9
9.5
AMV 90L AA
AMV 90L BA
6/8
6/8
0.55/0.22
0.75/0.30
0.75/0.30
1.0/0.40
960/740
940/720
5.5/2.8
7.6/4
65/47
64/45.5
0.62/0.51
0.67/0.52
2.0/1.4
2.5/1.85
2.1/1.5
2.7/1.9
3.9/2.9
3.4/2.6
2.5/2.1
2.2/1.9
4.78
4.78
16.2
16.2
AMV 100L AA 6/8
1.1/0.45
1.5/0.60
950/710
11.1/6.1
70.6/58
0.71/0.67
3.1/1.7
3.3/1.8
4.3/2.8
2.0/1.3
9.43
22.0
AMV 112M AA 6/8
1.5/0.6
2.0/0.80
970/720
14.8/8
75.8/65
0.65/0.60
4.4/2.3
3.7/2.5
5.5/3.4
2.8/2.1
18.70
39.0
AMV 132S ZA 6/8

AMV 132M YA 6/8
AMV 132M ZA 6/8
2.2/0.9
3/1.2
4/1.6
3.0/1.2
4.0/1.6
5.5/2.2
970/715
960/715
960/715
21.7/12
29.8/16
39.8/21.4
78.0/69.0
80/72
81.0/74.0
0.67/0.55
0.7/0.55
0.78/0.6
6.1/3.5
7.8/4.4
9.2/5.2
6.7/4.0
8.2/4.8
9.8/5.6
4.8/4.0
4.8/4.1
5.3/4.4
1.6/1.6
1.6/1.6
1.7/1.7
29.5
37.75
44.5
42.5
55.5
64.1
AMV 160M YA 6/8

AMV 160M ZA 6/8
5.5/2.2
7/3
7.5/3.0
9.5/4.1
970/730
970/730
54.1/28.8
68.9/39.2
83/76
84/77
0.77/0.6
0.80/0.65
12.5/7
15/8.7
13.5/7.5
16/9.3
5.7/5.6
6.0/5.8
1.6/1.9
1.7/2.2
112.7 88.0
150.25 97.5
[52]
[53]
[ T]
Three-phase fr ame siz e 56 - 160 IM B3

AM SERIES - ALUMINIUM ALLOY FRAME
LC
L
AL
AD
AD
H
HA
GD
IEC
DIN

H
h
A
b
B
a
HC
AC
HD
DA
EA
GA
DB
AF
C
w1
K 1)
s
AB
f
AA
BA
BB
B
LB
K1
AB
CA
BB
CA
e
AD 2)
HD 2)
g4
AC
m1
HC
g
HA
56
56
90
71
36
107
86
64
92
148
110
109
63
63
100
80
40
120
100
72
96
159
124
120
71
71
112
90
45
135
108
83
110
181
139
142
80
80
125
100
50
10
153
125
89
129
209
160
162
9.5
90S
90L
90
90
140
140
100
125
56
56
10
10
170
170
150
150
116
91
138
138
228
228
180
180
181
181
11
11
100L
100
160
140
63
11
192
166
110
145
245
196
198
12
112M
112
190
140
70
12.5
220
175
126
161
273
225
226
15
132S
132M
132M 4)
132
132
132
216
216
216
140
178
178
89
89
89
12
12
12
256
256
256
180
218
218
134
136
166
195
195
195
327
327
327
248
248
248
261
261
261
17
17
17
160M
160L
160L 5)
160
160
160
254
254
254
210
254
254
108
108
108
14
14
14
320
320
320
270
310
310
180
180
210
238
238
238
398
398
398
317
317
317
316
316
316
23
23
23
K1
c
IEC
DIN
L
LB
k
LC
AL
AF
k1
BA
m
AA
n
D/DA
d/d1
E/EA
l/l1
F/FA
GD
u/u1
GA/GC DB 3)
t/t1
d6/d7
56
188
168
211
61
92
27
27
20
10.2
M3
63
11
211
188
238
63
92
29
30
11
23
12.5
M4
71
11
246
216
278
69
92
28
31
14
30
16
M5
80
14
272
232
319
79
116
28.5
34.5
19
40
21.5
M6
90S
90L
15
15
317
317
267
267
372
372
85
85
116
116
28/53
28/53
37
37
24
24
50
50
8
8
7
7
27
27
M8
M8
100L
17
366
306
433
91
116
38
44
28
60
31
M10
112M
19
388
328
456
91.5
116
46
48
28
60
31
M10
132S
132M
132M 4)
20
20
20
442
482
500
362
402
420
523
563
593
100
120
120
133
133
133
45
45
45
59
59
59
38
38
38
80
80
80
10
10
10
8
8
8
41
41
41
M12
M12
M12
160M
160L
160L 5)
18
18
18
608
652
678
498
542
568
718
762
678
146
168
168
150
150
150
65
65
65
76
76
76
42
42
42
110
110
110
12
12
12
8
8
8
45
45
45
M16
M16
M16
1)
2)
3)
4)
5)
Clearance hole for screw

Maximum dimension
Centering holes in shaft extensions to DIN 332 part 2
Only for MT A2
Only for LR A4
Three-phase frame size 180 - 315 IM B3

AM SERIES - CAST IRON FRAME
H
h
A
b
B
a
C
W
K 1)
s
AB
f
BB
e
AD
g4
HD
m1
AC
g
180M
180L
180
180
279
279
241
279
121
121
15
15
348
348
310
348
259
259
439
439
360
360
200L
200
318
305
133
19
388
368
297
497
399
IEC Poles
DIN
225S
225M
4
2
4
225
225
225
356
356
356
286
311
311
149
149
149
19
19
19
436
436
436
361
386
386
328
328
328
553
553
553
465
465
465
250M
2
4
250
250
406
406
349
349
168
168
24
24
484
484
443
443
366
366
616
616
506
506
280S
2
4
2
4
280
280
280
280
457
457
457
457
368
368
419
419
190
190
190
190
24
24
24
24
557
557
557
557
459
459
510
510
388
388
388
388
668
668
668
668
559
559
559
559
2
4
2
4
2
4
315
315
315
315
315
315
508
508
508
508
508
508
406
406
457
457
508
508
216
216
216
216
216
216
28
28
28
28
28
28
630
630
630
630
630
630
590
590
672
672
672
672
525
525
525
525
525
525
840
840
840
840
840
840
680
680
680
680
680
680
HA
c
L
k
LB
AL
AA
n
D
d
E
l
F
u
GD
GA
t
DB 2)
d6
180M
180L
27
27
687
725
577
615
261
261
75
75
48
48
110
110
14
14
9
9
51.5
51.5
M16
M16
200L
25
768
658
285
80
55
110
16
10
59
M20
280M
315S
315M
315L
IEC Poles
DIN
225S
225M
4
2
4
28
28
28
814
809
839
674
699
699
295
295
295
85
85
85
60
55
60
140
110
140
18
16
18
11
10
11
64
59
64
M20
M20
M20
250M
2
4
30
30
918
918
778
778
342
342
80
80
60
65
140
140
18
18
11
11
64
69
M20
M20
280S
2
4
2
4
34
34
34
34
984
984
1035
1035
844
844
895
895
400
400
400
400
100
100
100
100
65
75
65
75
140
140
140
140
18
20
18
20
11
12
11
12
69
79.5
69
79.5
M20
M20
M20
M20
2
4
2
4
2
4
45
45
45
45
45
45
1160
1190
1310
1340
1310
1340
1020
1020
1170
1170
1170
1170
292
292
292
292
292
292
120
120
120
120
120
120
65
80
65
80
65
80
140
170
140
170
140
170
18
22
18
22
18
22
11
14
11
14
11
14
69
85
69
85
69
85
M20
M20
M20
M20
M20
M20
280M
315S
315M
315L
[54]
[55]
[ T]
[ T]
HIGH EFFICIENCY THREE-PHASE MOTORS IM B3

AMHE - AMPE* SERIES
*Only AMPE 2 poles motors. For AMPE 4 poles motors, please consult us
LC
L
AL
AD
AD
H
HA
GD
IEC
Poles
kW
DIN
HC
AC
HD
DA
EA
GA
DB
AF
AA
BA
BB
B
AB
CA
LB
K1
H
h
A
b
B
a
C
w1
K 1)
s
AB
f
BB
CA
AD 2)
e
HD 2)
g4
AC
m1
HC
g
71
0.75
71
112
90
45
135
108
83
110
181
139
142
80
2 - 4
all
80
125
100
50
10
153
125
89
129
209
160
162
90S
90L
2 - 4
2 - 4
all
all
90
90
140
140
100
125
56
56
10
10
170
170
150
150
116
91
138
138
228
228
180
180
181
181
100L

2
4
4
all
2.2
3
100
100
100
160
160
160
140
140
140
63
63
63
11
11
11
192
192
192
166
166
166
110
110
144
145
145
145
245
245
245
196
196
194
198
198
198
112M

2
2
4
4 - 5.5
7.5
all
112
112
112
190
190
190
140
140
140
70
70
70
12.5
12.5
12.5
220
220
220
176
176
176
126
148
126
160
160
160
272
272
272
225
222
225
225
225
225
132S

2
2
4
5.5
7.5
5.5
132
132
132
216
216
216
140
140
140
89
89
89
12
12
12
256
256
256
180
180
180
134
154
134
194
194
194
326
326
326
248
248
248
261
261
261
132M

2
2
4
9.2 - 11
15
all
132
132
132
216
216
216
178
178
178
89
89
89
12
12
12
256
256
256
218
218
218
156
207
136
194
194
194
326
326
326
248
248
248
261
261
261
160M
2 - 4
all
160
254
210
108
14
320
270
180
238
398
317
316
160L
2 - 4
all
160
254
254
108
14
320
310
180
238
398
317
316
IEC
Poles kW
HA
DIN
K1
c
L
LB
k
LC
AL
AF
k1
BA
m
AA
n
D/DA
d/d1
E/EA
l/l1
F/FA GD/GF GA/GC DB/DC 3)

u/u1
t/t1
d6/d7
71
0.75
11
246
216
278
69
92
28
31
14
30
16
M5
80
2 - 4
all
9.5
14
272
232
319
79
116
28.5
34.5
19
40
21.5
M6
90S
90L
2 - 4
2 - 4
all
all
11
11
15
15
317
317
267
267
372
372
85
85
116
116
28/53
28/53
37
37
24
24
50
50
8
8
7
7
27
27
M8
M8
100L

2
4
4
all
2.2
3
12
12
12
17
17
17
366
366
400
306
306
340
433
433
467
91
91
91
116
116
116
38
38
38
44
44
44
28
28
28
60
60
60
8
8
8
7
7
7
31
31
31
M10
M10
M10
112M

2
2
4
4 - 5.5
7.5
all
15
15
15
19
19
19
388
410
388
328
350
328
456
478
456
92
92
92
116
116
116
46
46
46
48
48
48
28
28
28
60
60
60
8
8
8
7
7
7
31
31
31
M10
M10
M10
132S

132M

2
2
4
2
2
4
5.5
17
7.5
17
5.5
17
9.2 - 11 17
15
17
all
17
20
20
20
20
20
20
445
465
445
505
556
485
365
385
365
425
476
405
523
543
523
583
634
563
100
100
100
120
120
120
133
133
133
133
133
133
45
45
45
45
45
45
59
59
59
59
59
59
38
38
38
38
38
38
80
80
80
80
80
80
10
10
10
10
10
10
8
8
8
8
8
8
41
41
41
41
41
41
M12
M12
M12
M12
M12
M12
160M
160L
2 - 4
2 - 4
all
all
18
18
608
652
498
542
668
712
146
168
150
150
65
65
76
76
42/28
42/28
110/60
110/60
12/8
12/8
8/7
8/7
45/31
45/31
M16/M10
M16/M10
23
23
1) Clearance hole for screw

2) Maximun distance
3) Centering holes in shaft extensions to DIN 332 part 2
[ T]
HI G H EF F I CI ENCY TH RE E -PH ASE MO T ORS IM B3

AMH - AMPH * SE RIE S
*Only AMPH 2 poles motors. For AMPH 4 poles motors, please consult us
LC
L
AL
AD
AD
H
HA
GD
HC
AC
HD
DA
EA
GA
DB
AF
IEC
Poli
kW
DIN
AA
BA
BB
B
AB
CA
LB
K1
H
h
A
b
B
a
C
K 1)
w1
AB
s
BB
f
CA
AD 2)
e
HD 2)
g4
AC
m1
HC
g
80
2 - 4
all
80
125
100
50
10
153
125
89
129
209
160
162
90S
90L
2 - 4
2 - 4
all
all
90
90
140
140
100
125
56
56
10
10
170
170
150
150
116
91
138
138
228
228
180
180
181
181
100L

2
4
4
all
2.2
3
100
100
100
160
160
160
140
140
140
63
63
63
11
11
11
192
192
192
166
166
166
110
110
144
145
145
145
245
245
245
196
196
194
198
198
198
112M
2 - 4
all
112
190
140
70
12,5
220
176
126
160
272
225
225
132S

132M

2
2
4
2
4
5.5
7.5
5.5
all
all
132
132
132
132
132
216
216
216
216
216
140
140
140
178
178
89
89
89
89
89
12
12
12
12
12
256
256
256
256
256
180
180
180
218
218
134
154
134
156
136
194
194
194
194
194
326
326
326
326
326
248
248
248
248
248
261
261
261
261
261
160M
160L
2 - 4
2 - 4
all
all
160
160
254
254
210
254
108
108
14
14
320
320
270
310
180
180
238
238
398
398
317
317
316
316
IEC
Poles kW
HA
DIN
K1
c
L
LB
k
LC
AL
AF
k1
BA
m
AA
n
D/DA
d/d1
E/EA
l/l1
F/FA GD/GF GA/GC DB/DC 3)

u/u1
t/t1
d6/d7
80
2 - 4
all
9.5
14
272
232
319
79
116
28.5
34.5
19
40
21.5
M6
90S
90L
2 - 4
2 - 4
all
all
11
11
15
15
317
317
267
267
372
372
85
85
116
116
28/53
28/53
37
37
24
24
50
50
8
8
7
7
27
27
M8
M8
100L

2
4
4
all
2.2
3
12
12
12
17
17
17
366
366
400
306
306
340
433
433
467
91
91
91
116
116
116
38
38
38
44
44
44
28
28
28
60
60
60
8
8
8
7
7
7
31
31
31
M10
M10
M10
112M
2 - 4
all
15
19
388
328
456
92
116
46
48
28
60
31
M10
132S

132M

2
2
4
2
4
5.5
7.5
5.5
all
all
17
17
17
17
17
20
20
20
20
20
445
465
445
505
485
365
385
365
425
405
523
543
523
583
563
100
100
100
120
120
133
133
133
133
133
45
45
45
45
45
59
59
59
59
59
38
38
38
38
38
80
80
80
80
80
10
10
10
10
10
8
8
8
8
8
41
41
41
41
41
M12
M12
M12
M12
M12
160M
160L
2 - 4
2 - 4
all
all
23
23
18
18
608
652
498
542
668
712
146
168
150
150
65
65
76
76
42/28
42/28
110/60
110/60
12/8
12/8
8/7
8/7
45/31
45/31
M16/M10
M16/M10
1) Clearance hole for screw

2) Maximun distance
3) Centering holes in shaft extensions to DIN 332 part 2
[56]
[57]
[ T]
Three-phase fr ame siz e 56 - 160 IM B14, IM B5

AM-AMHE-AMH-AMPE-AMPH SERIES - ALUMINIUM ALLOY FRAME
IMB14
IMB5
T
S
M
DB
GA
GD
LA
LA
E
E
Small flange B14
IEC
P
a1
DIN
56
80
Large flange B14
Flange B5
N
b1
LA
c1
M
e1
T
f1
S
s1
P
a1
N
b 1
LA
c1
M
e1
T
f1
S
s1
M
e1
N
b1
P
a1
T
f1
LA
c1
S1)
s1
50
65
2.5
M5
105
70
85
2.5
M6
100
80
120
2.5
M6
63
90
60
75
2.5
M5
120
80
100
2.5
M6
115
95
140
M8
71
105
70
85
2.5
M6
140
95
115
M8
130
110
160
3.5
10
M8
80
120
80
100
M6
160
110
8.5
130
3.5
M8
165
130
200
3.5
10
M10
90S-L
140
95
115
M8
160
110
130
3.5
M8
165
130
200
3.5
12
M10
100L
160
110
10
130
3.5
M8
200
130
12
165
3.5
M10
215
180
250
14
M12
112M
160
110
10
130
3.5
M8
200
130
12
165
3.5
M10
215
180
250
14
M12
132S-M
200
130
30
165
3.5
M10
250
180
12
215
M12
265
230
300
14
M12
160M-L
250
180
12
215
M12
300
230
12
265
M16
300
250
350
15
M16
GA
t
DB1)
d6
1) Clearence hole for screw. Hole as standard for 132 to 160 frame size
GA
GD
DB
EB
EG
ED
IEC
DIN
D
d
E
l
F h9
GD
u
EG
EB
ED
56
9 j6
20
10.2
M3
10
15
2.5
63
11 j6
23
12.5
M4
10
15
71
14 j6
30
16
M5
12.5
20
80
19 j6
40
21.5
M6
16
30
90S-L
24 j6
50
27
M8
19
40
100L
28 j6
60
31
M10
22
50
112M
28 j6
60
31
M10
22
50
132S-M
38 k6
80
10
41
M12
28
70
160M-L
42 k6
110
12
45
M16
36
100
1) Centering holes in shaft extension to DIN 332 part 2

[ T]
Three-phase frame size 180 - 315 IM B5

AM SERIES - CAST IRON FRAME
P
a1
T
f1
LA
c1
S 1)
s1

180M
4
300
250
350
5
180L
4
300
250
350
5
200L
4
350
300
400
5
225S
4
400
350
450
5
225M
2
400
350
450
5

4
400
350
450
5
250M
2
500
450
550
5

4
500
450
550
5
280S
2
500
450
550
5

4
500
450
550
5
280M
2
500
450
550
5

4
500
450
550
5
315S
2
600
550
660
6

4
600
550
660
6
315M
2
600
550
660
6

4
600
550
660
6
315L
2
600
550
660
6

4
600
550
660
6
15
15
17
20
20
20
20
20
22
22
22
22
22
22
22
22
22
22
19
19
19
19
19
19
19
19
19
19
19
19
24
24
24
24
24
24
GA
t
DB 2)
d6
51.5
51.5
59
64
59
64
64
69
69
79.5
69
79.5
69
85
69
85
69
85
M16
M16
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20

Poles
D
E
F
GD

d
l
u

180M
4
48
110
14
9
180L
4
48
110
14
9
200L
4
55
110
16
10
225S
4
60
140
18
11
225M
2
55
110
16
10

4
60
140
18
11
250M
2
60
140
18
11

4
65
140
18
11
280S
2
65
140
18
11

4
75
140
20
12
280M
2
65
140
18
11

4
75
140
20
12
315S
2
65
140
18
11

4
80
170
22
14
315M
2
65
140
18
11

4
80
170
22
14
315L
2
65
140
18
11

4
80
170
22
14
GA
N
b1
GD
EB
ED
DB
M
e 1

Poles

EG
1) Clearence hole for screw

2) Centering holes in shaft extension to DIN 332 part 2

[58]
[59]
All technical data, outputs, dimensions and weights stated in this catalogue are subject to
change without prior notice.
The illustrations are not binding.
Printed in March 2011.
btobcomunica.com
1031/11
Partners & Filiali

Lafert GmbH
Olgastrae 34/1
D - 73728 Esslingen - Germany
Phone +49 / (0) 711 540 3095 + 7
Fax +49 / (0) 711 540 3098
[email protected]
Lafert Electric Motors Ltd.

Electra House - Electra Way
Crewe, Cheshire CW1 6GL
United Kingdom
Phone +44 / (0) 1270 270 022
Fax +44 / (0) 1270 270 023
[email protected]
Lafert Moteurs S.A.S.

LIsle dAbeau Parc de Chesnes
75, rue de Malacombe
F - 38070 St. Quentin-Fallavier
France
Phone +33 / 474 95 41 01
Fax +33 / 474 94 52 28
[email protected]
Lafert Motores Elctricos, S.L.

Polgono Pignatelli, Nave 27
E - 50410 Cuarte de Huerva
(Zaragoza) - Spain
Phone +34 / 976 503 822
Fax +34 / 976 504 199
[email protected]
Lafert N.A. (North America)

5620 Kennedy Road - Mississauga
Ontario L4Z 2A9 - Canada
Phone +1 / 800/661 6413 - 905/629 1939
Fax +1 / 905/629 2852
[email protected]
Lafert Electric Motors (Australia)

Unit 3 - 891 Princes Highway
AUS - Springvale VIC 3171 - Australia
Phone +61 / (03) 9546 7515
Fax +61 / (03) 9547 9396
[email protected]
Lafert Singapore Pte Ltd

48 Hillview Terrace #03-08
Hillview Building - Singapore 669269
Phone +65 / 67630400 - 67620400
Fax +65 / 67630600
[email protected]
ENERGY EFFICIENT Motors
CUSTOMISED Motors
HIGH PERFORMANCE Motors
Lafert S.p.A.
Via J.F. Kennedy, 43
I - 30027 San Don di Piave
Venezia - Italy
Phone +39 / 0421 229 611
Fax +39 / 0421 222 908
[email protected]
SERVO Motors & Drives
www.lafert.com
LIFT Motors

Aeg Motors

Uploaded by

Copyright:

Available Formats

Aeg Motors

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Aeg Motors

Uploaded by

Copyright:

Available Formats

High Efficiency

Standards and regulations

Three-phase cage motors driven

General information - Technical Catalogue 1031/11

Lafert Group product range

ENERGY EFFICIENT Motors, high efficiency motors, IE2 code

CUSTOMISED Motors, special and customised motors,

HIGH PERFORMANCE Motors, high performance,

SERVO Motors & Drives, brushless servomotors and drives

LIFT Motors, synchronous gearless machines with

General information - Technical Catalogue 1031/11

In addition to EPAct requirements, these motors are a recognised component verified by

General information - Technical Catalogue 1031/11

General information - Technical Catalogue 1031/11

HIGH PERFORMANCE MOTORS

General information - Technical Catalogue 1031/11

SERVO MOTORS & DRIVES

General information - Technical Catalogue 1031/11

General information - Technical Catalogue 1031/11

sta nda rds a nd regul ati ons

The strictness of our quality

symbol was applied for the first time in 1995.

The safety instructions in the Operation Manual of the manufacturer and EN

General information - Technical Catalogue 1031/11

sta ndards and regulati ons

New International Efficiency Levels for Motors: IE Codes

General information - Technical Catalogue 1031/11

sta nda rds a nd regul ati ons

Efficiency values according to IEC 60034-30;2008

General information - Technical Catalogue 1031/11

sta ndards and regulati ons

Motors to special regulations:

General information - Technical Catalogue 1031/11

C ONDI T IONS OF INSTALLATION

Permissible temperature rise in K

VDE 0530 part 1

The motors conform to degree of protection IP 55 to IEC 60034-5. Higher protection on

Protective cowl (for vertical shaft-down motors)

The corresponding conditions of installation have to be clearly indicated in the order.

General information - Technical Catalogue 1031/11

+ 20 % of the guaranteed starting current

Breakaway torque (MA)

- 15 % and + 25 % of the guaranteed breakaway torque

Pull-up torque (MS)

- 15 % of the guaranteed value

Pull-out torque (MK)

- 10 % of the guaranteed value

Moment of inertia (J)

10 % of the guaranteed value

Centerings holes in shaft extension to DIN 332 part 2

General information - Technical Catalogue 1031/11

Protection against solid foreign 1

Protection against solid foreign 3

Protection against waterspray at

Protection against solid foreign 4

Protection against water splashed

Protection against dust 5

Protection against water

Complete protection against dust