STM1 ADM/TM

LOOP-O 9100 STM1 ADM/TM

Description
Loop-O9100 STM1 ADM/TM is an economic compact STM1 ADM & TM Multiplexer designed to add & drop up to: For 1U shelf: 56 x E1/T1 Tributaries 3 x DS3/E3 Tributaries with 28E1/T1 4 x 10/100M Ethernet Tributaries with 28E1/T1 For 3U shelf: 112 x E1/T1 Tributaries 6 x DS3/E3 Tributaries 12 x 10/100M Ethernet Tributaries

Features
TM, ADM, REGENERATOR Fully front access option Multiple Tributary modules: 28 E1/T1 on base unit 4/ 12/ 20/ 28-channel E1/T1 plug-in card (not hot-pluggable) Redundant hot-swappable AC/DC power card for ANSI shelf only SNCP/UPSR protection Optional MSP (1+1) protection Rack mount, Wall mount, and Stand-Alone Centralized management with Loops EMS/NMS over DCC channel External/Internal/Line timing Support VCAT (Phase-I Function), GFP (Phase-I Function), and LCAS (Phase-II Function) Up to 112 x E1/T1 add/drop Performance monitoring Alarm suppression, masking, and report

With up to 4 aggregate optical/electrical STM-1 interfaces, the Loop-ADM can offer the service provider a versatile protection scheme including SNCP and MSP(1+1) protection for both ring and linear Network topology. All interfaces are fully compliant with the relevant ETSI standards and ITU recommendations. The Loop-ADM provides powerful Operation, Administration, Maintenance and Provisioning (OAM&P) functionality, including fault management, performance monitoring, configuration management, and network security management. Through console port, LAN port, and DCC channel, the OAM&P can be achieved both locally and remotely via SNMP or menu-driven interfaces. Powerful SDH Loops EMS/NMS The Loop-ADM provides a completely set of operation interfaces that are consistent with the Telecommunication Management Network (TMN) concept (ITU Recommendation M.30, G.784) for SDH Network Element/ Operations System (NE/OS), NE/NE, and NE/Craft communications. User can easily operate Loop-ADM both locally or remotely for centralized management.

CERTIFIED ISO-9001

Ordering Information
Model Main Unit Loop-O 9100-1UA-h-n-ver-Add Loop-O 9100-1UE-h-n-A-A-ver-Add Loop-O 9100-3UA-n-ver-Add Loop-O 9100-3UE-n-1A-1A-ver-Add Loop-O 9100-3UE-n-2A-0A-ver-Add 1U height ANSI (rear & front access) shelf 1U height ETSI (fully front access) shelf 3U height ANSI (rear & front access) shelf 3U height ETSI (fully front access) shelf for SNCP (Sub-Network Connection Protection) 3U height ETSI (fully front access) shelf for trunk modules 1 for 1 protection 3U height ETSI (fully front access) shelf for SNCP (Sub-Network Connection Protection) & one trunk module 1 for 1 protection 3U height ETSI (fully front access) shelf for SNCP (Sub-Network Connection Protection) & two trunk modules 1 for 1 protection where h, n, A, ver, pp1, pp2, and Add are defined in below tables The 1st A is for east-side trunk, the 2nd A is for west-side trunk 0A for no trunk module, 1A for one trunk module, 2A for two trunk modules (1 for 1 protection). Description Note

Loop-O 9100-3UE-n-2A-1A-ver-Add

Loop-O 9100-3UE-n-2A-2A-ver-Add

Plug-in Tributary Module for 3U shelf only: Loop-O 9100-28E75 28E1 plug-in module w/ 75 ohm Loop-O 9100-28E120 Loop-O 9100-28T1 Loop-O 9100-3DS3 28E1 plug-in module w/ 120 ohm 28T1 plug-in module 3-port DS3 module For 3U shelf only Select 1 to 3 cards from the list

Loop-O 9100-3E3 3-port E3 module Plug-in Trunk Module for ANSI shelf only: Loop-O 9100-TK-A Plug-in Power Module for 1U shelf: Loop-O 9100-1U-SA Loop-O 9100-1U-SD Loop-O 9100-1U-SD24 Loop-O 9100-1U-SD48 Plug-in Power Module for 3U shelf: Loop-O 9100-3U-SA Loop-O 9100-3U-SD Loop-O 9100-3U-SD24 Loop-O 9100-3U-SD48 Order Wire IP Phone Loop-O 9100-OW SIP Proxy Server Software Loop-O 9100-SIP Connector Panel Loop-O 9100-RJ Loop-O 9100-BNC Loop-O 9100-WW 28-port RJ48 connector panel 28-port BNC connector panel 28-port Wire-Wrap pins connector panel Include two 1m SCSI cables for each panel SIP Proxy Server Order Wire (VoIP) Phone Single AC power supply Single DC power supply (For 24Vdc and 48Vdc: 20 - 60 Vdc) Single DC power supply (24Vdc 18-36 Vdc) Single DC power supply (48Vdc: 36-75 Vdc) Single AC power supply Single DC power supply (For 24Vdc and 48Vdc: 20 - 60 Vdc) Single DC power supply (24Vdc 18-36 Vdc) Single DC power supply (48Vdc: 36-75 Vdc) All types of trunk module For 3U ANSI shelf only Where A is defined as below

 where h is used to select chassis type for 1U shelf: On board Chassis h= 28E1 28E1 height E1/ T1 (75 ohm) (120 ohm) 100 101 102 103 104 105 106 107

Additional fixed module 28T1 1-port DS3 1-port E3 3-port DS3 3-port E3 Ethernet

1U Note

108 where n is used to select on-board E1/ T1 type: n= Description 4E75 4 E1 lines with 75 ohm 12E75 12 E1 lines with 75 ohm 20E75 20 E1 lines with 75 ohm 28E75 28 E1 lines with 75 ohm 4E120 4 E1 lines with 120 ohm 12E120 12 E1 lines with 120 ohm 20E120 20 E1 lines with 120 ohm 28E120 28 E1 lines with 120 ohm 4T 4 T1 lines 12T 12 T1 lines 20T 20 T1 lines 28T 28 T1 lines where A is used to select trunk module type: NOTE: The 1st A is for east-side trunk, the 2nd A is for west-side trunk. A= Description 0 None SAA SBB SCC SDD SEE SSM single optical module with dual uni-directional fiber, 1310 nm, SC optical connector, 30 km reach (20dB) single optical module with dual uni-directional fiber, 1310 nm, SC optical connector, 50 km reach (30dB) single optical module with dual uni-directional fiber, 1310 nm, FC optical connector, 30 km reach (20dB) single optical module with dual uni-directional fiber, 1550 nm, SC optical connector, 20 km reach (12dB) single optical module with dual uni-directional fiber, 1550 nm, SC optical connector, 100 km reach (40dB) single optical module with single bi-directional fiber (master), 1310 nm transmit and 1550 receive, SC optical connector, 30 km reach (20dB) single optical module with single bi-directional fiber (slave), 1310 nm receive and 1550 transmit, SC optical connector, 30 km reach (20dB) Electrical STM1/ OC3 module Other special optical modules for special order

Note Valid for 2nd A only Use 2 fibers Use 2 fibers Use 2 fibers Use 2 fibers Use 2 fibers 1310 nm from master to slave Order SSM to use with SSS Use 1 fiber 1550 nm from slave to master Order SSS to use with SSM Use 1 fiber

SSS EEE MMSnn

For other optical modules:

nn = 01 to 99 (contact sales for details) Note

where ver is used to select shelf trunk multiplexing: ver = Description STM ITU STM1 as the trunk multiplexing where Add is used to select other additional options: Add = CO Ring closure Description Note

Multiple option choices can be selected.

Loop-O 9100 STM1 ADM/TM PRODUCT SPECIFICATION

Physical/Electrical Dimensions for 3U 126mm x 300mm x 482mm (H/D/W) Dimensions for 1U 42mm x 300mm x 482mm (H/D/W) Power (AC) 90 to 240 VAC, 50/60Hz Power (DC) -24 to -48 Vdc 15% Temperature 0 to 50C Humidity 0-95%RH (non-condensing) Mounting Desk-top stackable, 19/23 inch rack mountable, and wall mountable EOW RJ-11 LAN port RJ-45 Console port DB-9 E1/T1 interface connector SCSI-II 68 pins Optical Interface connector FC or SC Number of Optical STM1 2 or 4 (only available on the 3U model) Number of E1/T1 channels 4/ 12/ 20/ 28 (on base unit) Clock Source Internal, STM1-Line, External Max. Number of Tributary Modules For 1U shelf: For 3U shelf: 56 x E1/T1 Tributaries 112 x E1/T1 Tributaries 3 x DS3/E3 Tributaries 6 x DS3/E3 Tributaries 4 x 10/100M Ethernet Tributaries 12 x 10/100M Ethernet Tributaries Optical STM1 aggregate line STM1 Optical Transmitter RMS Max. 6 nm Wavelength 1 Max. 1350 nm, Min. 1280 nm Wavelength 2 Max. 1590, Min. 1520 nm Output Power Min. 12 dBm Extinction Ratio Min. 10 dB Connector SC/PC or FC STM1 Optical Receiver Sensitivity Max. input power 0 dBm, Min. input power 34 dBm Connector SC/PC or FC Tributary Modules E1 module Line Rate Framing Unframed 2.048 Mbps 50 ppm Line Code AMI/HDB3 Connector Two SCSI-II 68-pin connectors Input Signal ITU G.703 Total Channels 28 Jitter ITU G.823 Electrical 75 coax/120 twisted pair Output Signal ITU G.703 T1 module Line Rate Framing Unframed 1.544 Mbps 32 ppm Line Code AMI/B8ZS Connector Two SCSI-II 68-pin connectors Input Signal DSX-1 0dB to 30dB w/ALBO Total Channels 28 Jitter ITU G.824 Output Signal DSX-1 w/short haul (0-133, 133-266, 266-399, 399-533, 533-655 feet) DS3 module Data Rate 44.736 Mbps 20ppm Framing Unframed Line Code B3ZS Output Mask Bellcore GR-499-core Connector BNC connector Total Ports 1 or 3 Impedance 75 Ohm Coax Jitter ITU G.824 E3 module Data Rate 34.368 Mbps 20ppm Impedance 75 Ohm Coax Line Code HDB3 Framing Unframed Connector BNC connector Output Mask ETS 300 689 Sec.4.2.1.2 ITU G.703 Total Ports 1 or 3 Jitter TU G.824 Ethernet module Data Rate 10/100Mbps Connector RJ-45 connector Layer2 Protocol Ethernet Mapping n x VC12, n x VC11, or n x VC3 Process Protocol VCAT, GFP, and LCAS Total Ports 4

Application Illustrations
The Loop-ADM can be configured as either a Terminal Multiplexer (TM), a Linear Add/Drop Multiplexer (LADM), or an Optical Regenerator (OR) with the same enclosure. With SNCP and MSP(1+1) protection, the Loop-ADM can easily provide a well-protected transmission path in various applications shown as follows:

GSM Application
BSC (Base Station Controller)

63 x E1 O9100 STM1 ADM

BTS

E1

O9100 STM1 ADM

O9100 STM1 ADM

E1

Up to 63 x E1 with SNCP Protection

O9100 STM1 ADM O9100 STM1 ADM

BTS

E1

E1

BTS

BTS

O9100 STM1 ADM

E1

BTS

Access Total solution

STM1 DS3 E1/T1

SDH Backbone DDN Internet

V4100 UMAP
112 x E1/T1 6 x E3/T3 32 x ethernet
O9100 STM1 ADM

E3/T3 E1/T1 Ethernet

O9100 STM1 ADM NMS

O9100 STM1 ADM

E3/T3 E1/T1 Ethernet

O9100 STM1 ADM

E3/T3 E1/T1 Ethernet

Two Linear STM-1 with MSP (1+1) protection

Regenerator

O9100 STM1 ADM

E3/T3 E1/T1 Ethernet

0 1

STM1 0 1

O9100 ADM E1/ T1 E3/ DS3 V4200-28

10/100

Ethernet Switch

rnet et M Ethe thern E1/ T1 0M E 10/10 H3700 AM3420 IP-DSLAM

E1/ T1 AM3440

E1/ T1 V4200-9

H3710 ADSL RT

E1200

U3500

E1500

H3300 G.shdsl

H3900 HDSL

PBX

PC LAN

Smart Building Application

Router Fax

AM3440
Fax PBX Video

V4200-9

Fax

AM3420

Hub

Video

V4200-28

Ethernet Switch 2+24

E1/T1 E3/T3 Ethernet

O9100 STM1 ADM

ADM

E1/T1 E3/T3 Ethernet

O9100 STM1 ADM

STM-1 UPSR/ SNCP Ring

O9100 STM1 ADM

E1/T1 E3/T3 Ethernet

ADM

STM 4/ 16 Ring
ADM O9100 STM1 ADM

E1/T1 E3/T3 Ethernet

ADM

E1/T1 E3/T3 Ethernet

V4100 UMAP

POTS Switch Application

POTS Switch on central side

112 x E1
O9100 STM1 ADM

E1/T1 E3/T3 Ethernet

Remote Switch

E1

O9100 STM1 ADM

Capacity up to 63xE1 with SNCP protection 112xE1 without protection

O9100 STM1 ADM

E1

Remote Switch

Remote Switch

E1

O9100 STM1 ADM

O9100 STM1 ADM

E1

Remote Switch

O9100 STM1 ADM

E1
Remote Switch

LoopTelecom.com

LOOP TELECOMMUNICATION INTERNATIONAL, INC.

Taipei, Taiwan
2F, No. 40, Section 2, Tuan-Hwa S. Road, Taipei, Taiwan 106 Tel:+886-2-2784-4000 Fax:+886-2-2754-2325

Worldwide
8F, No. 8, Hsin Ann Road, Science-Based Industrial Park Hsinchu, Taiwan 300 Tel:+886-3-578-7696 Fax:+886-3-564-6272 www.LoopTelecom.com sales@loop.com.tw

North America
8 Carrick Road Palm Beach Gardens Florida 33418, U.S.A. Tel:+1-561-627-7947 Fax:+1-561-627-6615 0007576940@mcimail.com jimber561@aol.com

Suzhou China
Tel:+86-512-6252-0456 Fax:+86-512-6252-7641 www.looptech.com.cn Info@looptech.com.cn Sales@looptech.com.cn

Tianjin China
Tel:+86-22-8789-2753 Fax:+86-22-8789-0344 Loop@loop-tj.com

2004 Loop Telecommunication International, Inc. All Rights Reserved

P12 11/12