Truck

Hydraulics
Innovative Products and System Solutions

Introduction
Parker Hannifin Corporation ......................................................................................................... 1 Truck Hydraulics ........................................................................................................................... 2 Value Added Programs ................................................................................................................. 4 Product Applications ..................................................................................................................... 5

Product Range
Pumps
Gear ............................................................................................................................................. 6 Piston ......................................................................................................................................... 10

Chelsea Power Take Off

Single Gear ................................................................................................................................ 11 Two Gear .................................................................................................................................... 11 Power Shift ................................................................................................................................. 13 For Allison World Transmissions ................................................................................................. 15 Direct Mount for Import Transmissions ........................................................................................ 16 Dual Output Shafts ..................................................................................................................... 17 Reversible ................................................................................................................................... 17 Crankshaft-Driven ....................................................................................................................... 17 Rear Mount and Thrushaft ......................................................................................................... 18 Split Shaft ................................................................................................................................... 18 Geared Adaptors ........................................................................................................................ 19 Dump Pumps .............................................................................................................................. 19 Wet Line Kits, Reservoirs and Accessories ................................................................................ 19

Hydraulic Valves
Directional Control Valves ........................................................................................................... 20 Volume and Check Valves .......................................................................................................... 20 Colorflow Valves ......................................................................................................................... 21 Ball Valves .................................................................................................................................. 21 Hydraulic Accessory Valves .................................................................................. 22

Remote Control Systems

Hydraulic .................................................................................................................................... 23 Pneumatic .................................................................................................................................. 23 Auxiliary Electronics .................................................................................................. 23

Threaded Cartridge Valves ..................................................................................... 24 Mobile Cylinders ............................................................................................................ 26 Motors ................................................................................................................................... 28 Filtration .............................................................................................................................. 30 Reservoir Accessories .............................................................................................. 31 Fluid Connectors
Hydraulic/Truck Hose .................................................................................................................. 32 Thermoplastic Tubing and Hose ................................................................................................. 32 Hydraulic Adaptors ..................................................................................................................... 33 Brass Fittings/Brass Valves ........................................................................................................ 33 Hydraulic/Pneumatic Quick Couplings ........................................................................................ 34 Kit Department ........................................................................................................................... 34

Information
Sales Offices .................................................................................................................... 35 Contact Information .................................................................................................... 36 CD Catalog ......................................................................................................................... 37
Copyright 2004, Parker Hannifin Corporation. All rights reserved.

Parker Hannifin Corporation

Parker Hannifin is a Fortune 300 corporation listed on the New York Stock Exchange as PH. Parker is the leading global company in manufacturing with the widest variety of components and systems designed to control motion, flow and pressure in all types of machinery and other equipment.

Premier Customer Service

Worldwide Network of Distributors

We offer over 1,400 product lines that control motion in 1,000 mobile, industrial and aerospace markets. Parker is the only manufacturer to offer its customers a choice of hydraulic, pneumatic, electromechanical, and motion control solutions. And we have the largest distribution network in our field, with over 7,500 distributors serving more than 422,000 customers worldwide. Parker products are found everywhere: in orbiting satellites, machine tools, truck equipment, hospitals and laboratories, oil rigs and refineries...anywhere machines depend on motion or fluid control.

Engineering Expertise

Industry-Leading Technical Support and Training

Truck Hydraulics
Fluid Power/Truck Focus Although Parker Hydraulics serves numerous industrial, mobile and truck industries, we are exclusively concentrated on controlling fluid motion and pressure. We have created a market-focused hydraulics truck team to concentrate solely on the needs of the customers in various vocational truck markets. Range of Capabilities

Parker is the most dynamic hydraulic motion and control provider in the vocational truck industry, offering system solutions and innovative products. Parkers hydraulic technology and components, including Commercial Intertech, Chelsea and Gresen product offerings, make Parker the leading choice to fill your vocational truck needs. With our qualified factory support and network of distributors, choosing your supplier for components, kits and solutions has never been easier. Our engineering staff is ready to assist you with application expertise, innovative designs and state-of-the-art technology. Total systems capability makes Parker todays complete supplier. Our customers can reduce their number of vendors without compromising quality. And, buying from a single source saves both time and money.

Parkers breadth of products forms the cornerstone of providing customers with unlimited solutions. Our hydraulic engineering, and application and manufacturing expertise are second to none. Offering customers the opportunity to select the level of integration that they believe will provide the best hydraulic solution, Parker can provide expertise in the following areas: Component Selection Sub-Systems Completely Integrated Systems Application Analysis Machinery Evaluation High Level Data Acquisition Design Engineering Assistance Custom Component Manufacturing Assemblies and Kits Global Support and Service

Truck Hydraulics
www.parker.com/truckhydraulics Parkers extensive web site offers a wealth of product information and other useful resources. It is the industrys most comprehensive site and includes technical product data, downloadable catalogs, contact information, training materials, product selection software and RFQ capabilities. This user-friendly interface allows you to search by general product families, specific product type, division, or keywords.

Manufacturing Parker continually invests in our world class ISO 9001 certified manufacturing facilities. Our factories are equipped with state-of-the-art equipment and technology to meet the demands of both quality and delivery. Our manufacturing is backed by an experienced engineering staff, working with todays latest tools and technology. This investment ensures that we maintain control of the manufacturing process and components, as well as the ability to look forward to new design ideas and solutions. Our truck hydraulic components are core to our business and investments. We do not outsource our components and solutions we manufacture them.

Value Added Programs

Premier Customer Service Parkers Premier Customer Service leads the industry in response. In addition to assured product quality, Parker provides engineering assistance, consolidated shipments, on-time delivery, extensive product information and customer training. Our employees are empowered to do whatever it takes to exceed customer expectations.

Kitting In those instances where you require multiple components and sub-assemblies for a specific application, Parker offers the added benefit of a kitting service. Within a kit, everything you need is delivered in one convenient package, ready for installation.

Field Sales Team With highly trained field sales engineers, strategically located throughout the world, knowledgeable assistance can be provided within hours. Linked by global communication systems, these experts will work together with a local Parker distributor on any product application to fulfill your needs. One Step Ahead

One Step Ahead is a worldwide Hydraulic

Group customer initiative that is based on the premise that employees take pride in their accomplishments and must be fulfilled on the job. When employees are satisfied, they are driven to do their best. Being One Step Ahead means anticipating customer needs and delivering premier service every time.

Training Parker is the industry leader in the development and presentation of technical training for hydraulic and pneumatic technology. We offer complete and comprehensive texts and hands-on classroom opportunities for our employees, distributors and customers. This includes web-based, on-site and classroom training at various Parker locations. Hundreds of college and universities in North America have adopted Parkers textbooks as the foundation for motion and control courses offered at their institutions. Training support materials include textbooks, instructor guides, computer-based training CDs, digital overheads on CD, final exams, drafting and simulation software, lab manuals and trainer stands.

Truck Hydraulic Product Applications

Dump Trucks/Trailers Wreckers Roll-Offs Hooklifts Truck Hi-lifts Gear Pumps/Motors Piston Pumps PTOs Hydraulic Valves Volume and Check Valves Accessory Valves Remote Control Systems Auxiliary Electronics Integrated Hydraulic Circuits/Cartridge Valves Mobile Cylinders Motors Fixed Displacement Filtration Reservoir Accessories Fluid Connectors Kits Bulkfeed Trucks Bus/Recreational Vehicle Vacuum Trucks Bulk Tanker Fuel Delivery/Propane/Liquid Car Haulers Walking Floor Oil Service

Pumps Gear
C101/102 G101/102, G104/105
Pump/valve combinations Available in remote mount or direct PTO Mount Two or three-line installations on G101/G102; three or four-line installations on G104/G105 Air remote operators available Supplied with 138 Bar (2000 PSI) relief valve Pressures to 172 Bar (2500 PSI)

C Frame size C/G Displacement (cm /rev) (in3/rev) Max continuous pressure (Bar) (PSI) Max speed (rpm)
3

G 25 104.5 6.38 172 2500 2400 0.7 24.2 1.48 172 2500 2400 1.5 48.4 2.96 172 2500 2400 2.0 64.6 3.94 172 2500 2400

20 83.6 5.10 172 2500 2400

P16

Aluminum flange and cover Available in tandem and piggyback configurations Cast iron gear plate Integral priority valve available Clockwise or counter-clockwise with relief, for steering or brake rotation circuits Flow range to 38 GPM per section Choice of mounting, shaft or port Journal bearings configuration Available with fluorocarbon seals

Frame size P16 Displacement (cm3/rev) (in3/rev) Max continuous pressure (Bar) (PSI) Max speed (rpm)

-45 14.4 0.89 207 3000 3600

-65 20.8 1.27 207 3000 3600

-85 27.3 1.67 207 3000 3400

-100 32.2 1.96 207 3000 3300

-115 36.7 2.24 207 3000 3100

-150 48.1 2.93 207 3000 2800

-180 57.5 3.51 152 2200 2500

-200 63.9 3.90 138 2000 2200

CP16

V-Belt, Direct Couple, or Serpentine Belt clutch options In-cab control available Side or rear porting option Same displacements and ratings as P16 units (above) Clutches available as separate items

Gear Pumps
PGP020
Rugged cast iron body Variety of drive shafts and mounting styles Flows: up to 29 GPM at 2400 rpm and 3000 PSI; up to 39 GPM at 2400 rpm and 2500 PSI Can be assembled in tandem Can be configured as a pump or motor

Frame size PGP020 Displacement (cm /rev) (in3/rev) Max cont pressure PGP020 (Bar) (PSI) Max speed (rpm)
3

-05 16.1 0.99 207 3000 2400

-07 24.2 1.48 207 3000 2400

-10 32.3 1.97 207 3000 2400

-12 40.4 2.46 207 3000 2400

-15 48.4 2.96 207 3000 2400

-17 56.5 3.45 172 2500 2400

-20 64.6 3.94 172 2500 2400

PGP030/031, PGP050/051 Three-piece cast iron construction Heavy duty application PGP075/076
Long life in severe environments Single, multiple or piggyback assemblies Variety of valve option available Can be configured as a pump or motor
Frame size PGP030/031 Displacement (cm /rev) (in3/rev) Max cont pressure PGP030 (Bar) (PSI) PGP031 (Bar) (PSI) Max speed (rpm) Frame size PGP050/051 Displacement (cm3/rev) (in3/rev)
3

-05 16.1 0.99 172 2500 207 3000 2400 -05 20.9 1.28 -07 31.3 1.91 172 2500 207 3000 2400 -10 67.2 4.10 172 2500 207 3000 2400

-07 24.2 1.48 172 2500 207 3000 2400 -10 41.6 2.55 172 2500 207 3000 2400 -12 84.0 5.13 172 2500 207 3000 2400

-10 32.3 1.97 172 2500 207 3000 2400 -12 52.2 3.19 172 2500 207 3000 2400 -15 100.8 6.15 172 2500 207 3000 2400 -17 117.6 7.18 172 2500 207 3000 2400

-12 40.4 2.46 172 2500 207 3000 2400 -15 62.7 3.83 172 2500 207 3000 2400 -20 134.4 8.20 172 2500 172 2500 2400 -17 73.1 4.46 135 2000 207 3000 2400

-15 48.4 2.96 172 2500 207 3000 2400 -20 83.6 5.10 138 2000 172 2500 2400 -25 168.0 10.25 155 2250 172 2500 2400

-17 56.5 3.45 155 2250 172 2500 2400 -22 94.0 5.74 138 2000 172 2500 2400 -27 184.8 11.28 138 2000 138 2000 2400

-20 64.6 3.94 155 2250 172 2500 2400 -25 104.5 6.38 138 2000 172 2500 2400 -30 201.6 12.30 138 2000 138 2000 2400

Max cont pressure PGP050 (Bar) 172 (PSI) 2500 PGP051 (Bar) 207 (PSI) 3000 Max speed (rpm) 2400 Frame size PGP075/076 Displacement (cm /rev) (in3/rev)
3

-07 50.4 3.08

-22 151.2 9.23 155 2250 172 2500 2400

Max cont pressure PGP075 (Bar) 172 (PSI) 2500 PGP076 (Bar) 207 (PSI) 3000 Max speed (rpm) 2400

Pumps Gear
PGP300 Series
Three-piece cast iron construction Low friction bushing design Single, multiple, piggyback and thru-drive assemblies Heavy duty application Long life in severe operating environments Integrated or bolt-on valve options available Direct clutch mount available Can be configured as pump or motor

Frame size PGP315/PGM315 Displacement (cm /rev) (in3/rev) Max continuous pressure (Bar) (PSI) Max speed (rpm)
3

-05 10.2 .620

-06 12.7 .775

-07 15.2 .930

-08 17.8 1.09

-10 20.3 1.24

-11 22.9 1.40

-12

-13

-15 30.5 1.86 228 3300 3000

-16 33.0 2.02

-17 35.6 2.17

-18 38.1 2.33

-20 40.6 2.48

25.9 27.9 1.55 1.711 241 241 3500 3500 3000 3000

241 241 241 241 241 241 3500 3500 3500 3500 3500 3500 3000 3000 3000 3000 3000 3000

214 200 3100 2900 3000 3000

186 172 2700 2500 3000 3000

Frame size PGP330/PGM330 Displacement (cm3/rev) (in3/rev) Max continuous pressure (Bar) (PSI) Max speed (rpm)

-05 16.1 .985 241 3500 3000

-07 24.2 1.47 241 3500 3000

-10 32.3 1.97 241 3500 3000

-12 40.4 2.46 241 3500 3000

-15 48.4 2.95 241 3500 3000

-17 56.5 3.44 224 3250 3000

-20 64.6 3.94 207 3000 3000

Frame size PGP350/PGM350 Displacement (cm /rev) (in3/rev) Max continuous pressure (Bar) (PSI) Max speed (rpm)
3

-05 20.9 1.28 241 3500 2400

-07 31.3 1.91 241 3500 2400

-10 41.8 2.55 241 3500 2400

-12 52.2 3.19 241 3500 2400

-15 62.7 3.82 241 3500 2400

-17 73.1 4.46 224 3250 2400

-20 83.6 5.10 207 3000 2400

-22 94.0 5.73 190 2750 2400

-25 104.5 6.38 172 2500 2400

Frame size PGP365/PGM365 Displacement (cm3/rev) (in3/rev) Max continuous pressure (Bar) (PSI) Max speed (rpm)

-07 44.3 2.70 241 3500 2400

-10 59.0 3.60 241 3500 2400

-12 73.8 4.50 241 3500 2400

-15 88.5 5.40 241 3500 2400

-17 103.3 6.30 241 3500 2400

-20 118.0 7.20 241 3500 2400

-22 132.8 8.10 224 3250 2400

-25 147.5 9.00 207 3000 2400

Gear Pumps
PGP 500 Series
Superior performance High efficiency Low noise operation at high operating pressures International mounts and connections Integrated valve capabilities Common inlet multiple pump configurations Can be configured as a pump or motor

Frame size PGP505 Displacement (cm3/rev) (in3/rev) Max continuous pressure (Bar) (PSI) Max speed at 0 inlet & max outlet pressure (rpm) Frame size PGP511 Displacement (cm /rev) (in3/rev) Max continuous pressure (Bar) (PSI) Max speed at 0 inlet & max outlet pressure (rpm)
3

-2 2 .12 275 3988 4000

-3 3 .18 275 3988 4000

-4 4 .24 275 3988 4000

-5 5 .31 275 3988 4000

-6 6 .37 275 3988 3600

-7 7 .43 275 3988 3300

-8 8 .49 275 3988 3000

-9 9 .55 250 3625 2900

-10 10 .61 250 3625 2800

-11 11 .67 250 3625 2400

-12 12 .73 220 3190 2400

-6 6 .37

-7 7 .43

-8 8 .49

-10 10 .61

-11 11 .67

-14 14 .85

-16 16 .98

-18 18 1.10

-19

-21

-23

-27

-28

-31

19 21 1.16 1.28

23 27 28 31 1.40 1.65 1.71 1.89

275 275 275 275 275 275 275 275 275 235 235 200 195 195 3988 3988 3988 3988 3988 3988 3988 3988 3988 3408 3408 2900 2828 2828 4000 4000 4000 3600 3600 3300 3000 3000 3000 2800 2800 2400 2300 2300

Frame size PGP517 Displacement (cm3/rev) (in3/rev) Max continuous pressure (Bar) (PSI) Max speed at 0 inlet & max outlet pressure (rpm)

-14 14 .85 250 3625 3400

-16 16 .98 250 3625 3400

-19 19 1.16 250 3625 3300

-23 23 1.40 250 3625 3300

-25 25 1.53 250 3625 3100

-28 28 1.71 250 3625 3100

-33 33 2.01 250 3625 3100

-36 36 2.20 250 3625 3000

-38 38 2.32 250 3625 3000

-44 44 2.68 220 3190 2800

-52 52 3.17 200 2900 2700

Pumps Piston
F1/F2
Pressures up to 345 Bar (5000 PSI) High power capability Twin Flow version available High self-priming speed Easy to install Easy to service
F1 Frame size F1/F2 Displacement (cm3/rev) (in3/rev) Max continuous pressure (Bar) (PSI) Shaft speed (rpm) Input torque (lb ft) Input power (hp) -25 25 1.53 350 5000 2600 105 42 -41 41 2.50 350 5000 2400 168 62 -51 51 3.11 350 5000 2200 210 70 -61 61 3.72 350 5000 2200 244 82 -53/53 54/52 3.30/3.17 350 5000 1800 583 118 F2 -70/35 69/36 4.21/2.20 350 5000 1800 583 118

VP1

Pressures up to 345 Bar (5000 PSI) Suitable for all load-sensing systems Splined shaft DIN 5462 Mounting flange ISO 7653-1985
Frame size* VP1 Displacement (cm /rev) (in3/rev)
3

Light and compact Strong and reliable Less energy less fuel less heat Self-priming

-45 45 2.75 300 4350 2400

-75 75 4.58 300 4350 2100

-120 120 7.32 300 4350 1800

Max continuous pressure (Bar) (PSI) Self-priming speed* (rpm)

* 2" suction line

PAVC

Frame size PAVC Displacement (cm /rev) (in3/rev)
3

High strength cast iron housing Built in supercharger High sideload capacity Sealed shaft bearing option Two piece housing Cartridge controls Airbleed valve
-38 38 2.3 207 3000 3000 -65 65 4.0 207 3000 3000 -100 100 6.1 207 3000 2600

Thru-shaft option (PAVC100) Optional port location Full pressure rating on water glycol fluids Control drain may be filtered and/or cooled

-33 33 2.0 207 3000 3000

Max continuous pressure (Bar) (PSI) Max self priming speed at 0 PSI gauge (rpm)

10

Power Take Off

Single Gear 100, 812
Series 100 Single-speed, low-torque applications Cast iron housing Six shift options Series 812 Only single-gear, 8-bolt PTO in the industry Extra heavy-duty applications Four shift options, 5 output types

100

812
Series Standard output shaft size Intermittent torque rating (lbs. ft) 100 (6-Bolt) " 125 11.9 23.5 812 (8-Bolt) 1" 400 38 76

Horsepower rating for intermittent Service: at 500 RPM of output shaft at 1000 RPM of output shaft

Automatic or high-speed manual Two Gear transmissions 221 (6-Bolt), 260 (6-Bolt) 260 Series features high reduction gearing for extra low speed Standard and low-profile housings Five shift options Wide range of pump flanges 221 260
Series Standard output shaft size Intermittent torque rating (lbs. ft) Horsepower rating for intermittent Service: at 500 RPM of output shaft at 1000 RPM of output shaft 221*C 1" 250 23.5 47 221*E 1" 250 23.5 47 221*L 1" 200 19 38 260 1" 250 23.5 47

441 (6-Bolt)

Feature dowel pin alignment with Eaton Fuller Lightning transmissions No backlash to set Ten speed ratios Eleven shift options, 21 output options
Series 441*A 441*C 441*F 441*L 441*Q 441*R 441*S 441*U 441*W 441*X 1" 250 23.5 47 1" 250 23.5 47 1" 250 23.5 47 1" 250 23.5 47 1" 225 21.4 42.8 1" 225 21.4 42.8 1" 200 19 38 1" 195 18.6 37.2 1" 175 16.7 33.3 1" 140 13.2 26.5

Standard output shaft size Intermittent torque rating (lbs. ft) Horsepower rating for intermittent Service: at 500 RPM of output shaft at 1000 RPM of output shaft

11

Power Take Off

Two Gear (cont.) 442, 489 (6-Bolt)
For virtually all transmissions Economical workhorse Cast iron housing and tapered cone bearing Easy to interchange between transmissions 489 6-bolt design has integral 8-bolt flange casting; needs no adapter plate

442
Series Standard output shaft size Intermittent torque rating (lbs. ft) Horsepower rating for intermittent Service: at 500 RPM of output shaft at 1000 RPM of output shaft 442*A 442*C 442*F 442*L 442*Q 442*R 442*S 442*U 442*W 442*X 489*A 489*C 489*F 489*L 489*Q 489*R 489*S 489*U 489*W 489*X 1" 250 23.5 47 1" 250 23.5 47 1" 250 23.5 47 1" 250 23.5 47 1" 225 21.4 42.8 1" 225 21.4 42.8 1" 200 19 38 1" 195 18.6 37.2 1" 175 16.7 33.3 1" 140 13.2 26.5

447 (6-Bolt)

Eliminates interference problems inside the transmission/PTO opening Five speed ratios, 7 shift options Optional pressure lubrication

Series Standard sutput shaft size Intermittent torque rating (lbs. ft) Horsepower rating for intermittent Service: at 500 RPM of output shaft at 1000 RPM of output shaft

447*Q 447*R 447*S 447*U 447*W 1" 225 21.4 42.8 1" 225 21.4 42.8 1" 200 19 38 1" 195 18.6 37.2 1" 175 16.7 33.3

880 (8-Bolt)

High and low speed applications, high torque capacity Three shift options Dual pump output available

Series Standard output shaft size Intermittent torque rating (lbs. ft) Service: at 500 RPM of output shaft at 1000 RPM of output shaft

880*B 500 47 94

880*D 500 47 94

880*G 500 47 94

880*J 500 47 94

880*M 500 47 94

880*P 500 47 94

880*R 880*T 400 38 76 350 33 66

1" 10 spline with 1410 flange

12

Power Take Off

Two Gear (cont.) 823
Robust design for high torque applications Lever shift standard Inspection cover for adjusting backlash Popular pump mounts available

Series Standard output shaft size Intermittent torque rating (lbs. ft) Horsepower rating for intermittent Service: at 500 RPM of output shaft at 1000 RPM of output shaft

823 B, D, G, J, M 1" 500 47 94

823 R 1" 100 38 76.2

Power Shift 230/231, 270/271 (6-Bolt)

Standard housing (230/231) and low profile housing (270/271) 230/231 electric-over-air shifting; 270/271 hydraulically operated Optional pressure lubrication

230 270
Series 230*A, B, D, K & Q 270*A, B, D w/Pressure Lube 1" 300 28.5 57 230*A, B, D, K & Q 231 & 271 270*A, B, D All Units w/Standard Lube All Lube Types 1" 250 23.5 57 1" 250 23.5 57 230*U/231*U All Lube Types 1" 225 21.4 42.8

Standard output shaft size Intermittent torque rating (lbs. ft) Horsepower rating for intermittent Service: at 500 RPM of output shaft at 1000 RPM of output shaft

236 (6-Bolt)

236 fits virtually all currently produced transmissions New optional brake feature is excellent for propane or product pumps

10 output options from 1" round output shafts to Din pump flanges Optional pressure lubrication for automatic transmissions

Series Standard output shaft size Intermittent torque rating (lbs. ft) Horsepower rating for intermittent Service: at 500 RPM of output shaft at 1000 RPM of output shaft

236*D 1" 250 23.8 47.6

236*K 1" 250 23.8 47.6

236*Q 1" 250 23.8 47.6

236*U 1" 225 21.4 42.8

13

Power Take Off

Power Shift (cont.) 250, 251 (6-Bolt)
250 features latest technology for automatic transmissions including Controlled Compression Interface Gasket 251 features weather-tight electrical connectors for under-the-vehicle connections; Electronic Overspeed Control available

250
Series Standard output shaft size Intermittent torque rating (lbs. ft) Horsepower rating for intermittent Service: at 500 RPM of output shaft at 1000 RPM of output shaft 250*D 1" 120 13.3 26.6 251*D 1" 120 13.3 26.6

242/244, 243, 245 (6-Bolt)

243

244 245
Series 242F 112 39 243 1" 85 8.1 16.2 112 39 120 42 244F 245F

Standard output shaft size Intermittent torque rating (lbs. ft) Horsepower rating for intermittent Service: at 500 RPM of output shaft at 1000 RPM of output shaft at 1200 RPM of output shaft

242/244 Series for Ford Super Duty transmissions 243 Series for Mitsubishi 245 Series for Ford 5-speed TorqShift transmission Controlled Compression Interface Gasket eliminates setting gear backlash Electronic Overspeed Control available Lightweight housing for maximum heat dissipation

800, 852 (8-Bolt), 885

The only 8-bolt power shift PTOs on the market today 800 is compact in size; 852 is used for heavy-duty applications on automatic transmissions Electric-over-hydraulic shifting and pressure lubrication on both
800*M Single Gear 118" Rd. 250 23.5 47 852*B, G, J Two Gear 1" 10 Spline w/1410 Flange 500 47 94 500 47 94 885*B, G, J, M

800

852
Series

Standard output shaft size Intermittent torque rating (lbs. ft) Horsepower rating for intermittent Service: at 500 RPM of output shaft at 1000 RPM of output shaft

14

Power Take Off

For Allison World Transmissions 267 (10-Bolt) Non-shiftable
Ideal for applications requiring continuous power whenever the engine is running Five speed ratios

Series Standard output shaft size Intermittent torque rating (lbs. ft) Horsepower rating for intermittent Service: at 500 RPM of output shaft at 1000 RPM of output shaft

267*B 1" 325 31.8 63.6

267*D 1" 325 30.9 61.8

267*G 1" 300 28.5 57.0

267*M 1" 265 25.2 50.4

267*S 1" 250 21.4 42.8

277, 278 (10-Bolt)

277
Series Standard output shaft size (Rd.) Intermittent torque rating (lbs. ft) Horsepower rating for intermittent Service: at 500 RPM of output shaft at 1000 RPM of output shaft

Approved for use with Allison World transmissions Helical gears for quieter operation Exclusive shimming gaskets Simplified plumbing Pressure lubrication standard Powershift
277*B 278*B 1" 335 31.8 63.6 277*D 278*D 1" 325 30.9 61.8 277*G 278*G 1" 300 28.5 57 277*M 278*M 1" 265 25.2 50.4 277*S 278*S 1" 250 23.8 47.6 278*T 1" 250 21.4 42.8

859 (10-Bolt)

Highest torque capacity of any PTO offered for Allison World transmissions Compact design Three speed ratios Powershift

Series Standard output shaft size Intermittent torque rating (lbs. ft) Horsepower rating for intermittent Service: at 500 RPM of output shaft at 1000 RPM of output shaft

859*G 575 54.7 109.4

859*M 490 46.6 93.2

859*R 415 39.5 79

859*T 350 33.3 66.4

1" 10 spline with 1410 flange

15

Power Take Off

For Allison World Transmissions (cont.) 867 (10-Bolt) Constant Mesh (non-shiftable)
PTO that is ideal for applications requiring continuous power Four speed ratios and five output options Torque ratings from 350 to 575 ft. lbs.

Series Standard output shaft size Intermittent torque rating (lbs. ft) Horsepower rating for intermittent Service: at 500 RPM of output shaft at 1000 RPM of output shaft

867*G 575 54.7 109.4

867*M 490 46.6 93.2

867*R 415 39.5 79

867*T 350 33.3 66.4

1" 10 spline with 1410 flange

Direct Mount for Import Transmissions 290/295 Chelsea is the only domestic manufacturer to offer you PTOs 429, 434, 435 that mount directly to import 436, 437, 438

transmissions, eliminating the need for a geared adapter. These PTOs have cast iron housings and tapered cone bearings for increased load
295 1" 175/145 16.6/13.8 33.3/27.6 429 1" 175 17.5 35 434 1" 175 16.1 32.2

capacity. Wire and air shifters are available on all; other shift options available on some. All are available with Chelseas most popular direct mount pump flanges.

Series Standard output shaft size (Rd.) Intermittent torque rating (lbs. ft) Horsepower rating for intermittent Service: at 500 RPM of output shaft at 1000 RPM of output shaft

290 1" 175/145 16.6/13.8 33.3/27.6

435 1" 175 17.5 35

436 1" 175 17.5 35

437 1" 120 11.4 22.8

438 1" 140 13.3 26.6

PTO 290 295 429 434 435 436 437 438

Manufacturer Eaton/Fuller IVECO Mitsubishi Isuzu Hino Isuzu Isuzu Mitsubishi

Transmission Series 4106 2838.5 and ZED-F 56-36 MO5OS5, MO6OS6, MO7OS6 MLD LF06S and LJ06S MBG5B, MBG5H, MBG5C, MBD5A MSA5D M4, M5, M6, M5s5, M6s5, M6s6

16

Power Take Off

Dual Output Shafts 452
Only dual shaft PTO in the industry Designed for applications requiring two single-rotation shafts Only one shaft can be engaged at a time Same gearing as the 442 Series

Series Standard output shaft size (Rd.) Intermittent torque rating (lbs. ft) Horsepower rating for intermittent Service: at 500 RPM of output shaft at 1000 RPM of output shaft

452 6-Bolt 1" 140 13.2 26.5

Reversible 340, 352, 863

Generally used for applications requiring multiple directions Forward and reverse Dual pump output available

340 863
Series Standard output shaft size (Rd.) Intermittent torque rating (lbs. ft) Horsepower rating for intermittent Service: at 500 RPM of output shaft at 1000 RPM of output shaft 340 352 6-Bolt 6-Bolt 1" 200 19 38 1" 140 13.2 26.5 863 8-Bolt 1" 10 spline w/1410 flange 500 47 94

Crankshaft-Driven 2330U 2442

Generally used for applications requiring multiple directions Forward and reverse Dual pump output available

2442
Series Standard output shaft size (Rd.) Intermittent torque rating (lbs. ft) Horsepower rating for intermittent Service: at 500 RPM of output shaft at 1000 RPM of output shaft 2330U 2442F 2442L 2442Q 2442R 2442S 1" 225 21.4 42.8 1" 250 23.5 47 1" 250 23.5 47 1" 225 21.4 42.8 1" 225 21.4 42.8 1" 200 19 38 2442U 2442W 2442X 1" 195 18.6 37.2 1" 175 16.7 33.4 1" 140 13.2 26.5

17

Power Take Off

Rear Mount and Thrushaft 540 Series rear mount fit Eaton Fuller transmissions with 540/541, extended countershaft option 542
541 Series thrushaft mounts on the rear of Eaton Fuller transmissions Both are 8-bolt PTOs 542 Series designed for Eaton Lightning transmission Two speed ratios available Two output options Air shifted

540
Series Standard output shaft size (Rd.) Intermittent torque rating (lbs. ft) Horsepower rating for intermittent Service: at 500 RPM of output shaft at 1000 RPM of output shaft 540*P 540*R 540*S Countershaft 400 38.1 76.2 300 28.5 57 541*L 541*M 541*N Thrushaft 350 33.3 66.6 300 28.5 57 542*S 542*T 1"31 tooth 205 19 39 180 17 34

1" 10 spline with 1410 flange 500 47.6 95.2

1" 10 spline with 1410 flange 400 38.1 76.2

Rear Mount 522

Robust modular design Compact size Easy to install Internal air shift Positive engagement

Series Standard output shaft size Intermittent torque rating (lbs. ft) Horsepower rating for intermittent Service: at 500 RPM of output shaft at 1000 RPM of output shaft

522 1" 258 24.5 49

Split Shaft 901, 912, 941

901 Series is 6-bolt PTO with torque capacity of an 8-bolt 912 Series has three 8-bolt openings for auxiliary equipment 941 Series offers two 6-bolt openings 941
Series 901 500 47 94 912 * * * 941 * * *

912

Standard output shaft size 1" 10 spline Intermittent torque rating (lbs. ft) Horsepower rating for intermittent Service: at 500 RPM of output shaft at 1000 RPM of output shaft
*Use rating of units mounted on these PTOs

2" 10 spline 1" 12 spline

18

Power Take Off

Geared Adapters 626, 628, 645, 630
Same gearing as Chelseas 442 Series Tapered cone bearings, cast iron housing for ruggedness Optional pressure lube 626 Series changes rotation on 6-bolt PTO mounted to 6-bolt transmission 628 628 Series changes rotation on 6-bolt PTO mounted to 8-bolt transmission 630 Series changes the rotation of six bolt PTOs and moves the PTO to a 30 degree angle 645 Series moves PTO to 45 angle to help eliminate interference problems

626

645

630

Dump Pumps
See Gear Pumps Section, Page 6.

Wet Line Kits, Reservoirs and Accessories

Complete offering of wet line kits, sub-kits and components for immediate delivery. Pumps PTOs Cylinders Hydraulic hose Hose kits Couplers Connectors Reservoirs (steel, aluminum, reinforced polyethylene) Reservoir accessories Filters Air control kits Control consoles Valves Push-to-connect pneumatic manifolds Mounting accessories

19

Hydraulic Valves
Directional Control Valves Four models of open-center, conV20
stant flow valves are available, with flow ranges from 10-70 GPM and pressures up to 241 Bar (3500 PSI). This product offering includes a variety of manual, pneumatic, hydraulic and solenoid back cap options. Open-center, constant flow valves are intended for applications in which simple, uncomplicated components are required and where the demands for simultaneousoperation characteristics are moderate. Parker valves can be obtained with a large number of optional components and mountings such as: A main pressure relief Individually adjusted port-relief and anti-cavitation valves Application adapted spools A large selection of spool actuators Single or multi-pump operation by stacked valves Load hold checks Crossover reliefs Flow controls Power beyond feature
Options vary for different valves. Closed-center, pressure compensated, load sensing valves are available for specified truck applications. Please contact your field sales representative.

VA20

Open-Center, Constant Flow Valves

Valve V10 V12 V20 V20HR/HRO VA/VG20 VA/VG35 300/400 SP/SPK/SSK MV3 MV4 MV5 Pump Flow Pressure Liters/Min (GPM) Bar (PSI) 57 (15) 45 (12) 94 (25) 94 (25) 151 (40) 264 (70) 61 (16) 76 (20) 30 (8) 45 (12) 23 (6) 241 (3500) 207 (3000) 241 (3500) 241 (3500) 241 (3500) 241 (3500) 173 (2500) 138 (2000) 207 (3000) 207 (3000) 207 (3000) Operation Manual X X X X X X X X X X X X X X X X X X X X X Pneumatic Hydraulic X Solenoid X

Volume and Check Valves

Hydraulic velocity fuse valves Low cost check valves Restrictor check valves Priority flow control valves

20

Hydraulic Valves
Colorflow Valves
Inline mounted flow, check, needle, gauge isolator and snubber valves Flow controls available in pressure compensated models Sizes "2" Choice of NPTF, SAE, BSPP and ISO 6149 metric ports Maximum operating pressures up to 345 Bar (5000 PSI) Flows up to 568 LPM (150 GPM) Steel bodies; some models also available with brass or stainless steel

Ball Valves

Designed for hydraulic, pneumatic and other media Features full-port design for low pressure drop and maximum system efficiency Blowout-proof stems

Assortment of port configurations including threaded, manifold mounted, SAE split flange and a unique 4-bolt rotating SAE flange design

Valve BVAM BVHP BVAH BVHH BVMM BV3D BV3H/BV4H BVAL 590 500 500CS 500SS

Function 2-way 2-way 2-way 2-way 2 & 3-way (manifold) 3-way 3 & 4-way 2-way (suction) 2-way (right angle) 2-way 2-way 2-way

Pressure Bar (PSI) 138 (2000) 414 (6000) 414 (6000) 993 (14000) 414 (6000) 207 (3000) 414 (6000) 28 (400) 17 (250) 41 (600) 138 (2000) 138 (2000)

Port Sizes 2" 4" " 1" " 2" " 2" " 1" " 2" " 2" 2" 4" " " " 2" " 1" " 1"

Material Steel Steel Steel Steel Steel Steel Steel Steel Brass Brass Steel Stainless steel

21

Hydraulic Accessory Valves

Flow controls, flow dividers, pilot operated check valves, relief valves, selector valves and bankable/stackable directional control valves Flows to 225 LPM (60 GPM) Pressures to 207 Bar (3000 PSI) Cast iron bodies

Valve CFQ CFD CFDA DC PD/PDC LO LOA WJT/WJL RPJT/RPJL JT/JL KCL RPL DXV DWV HP 20 HP 50 S-50 S-75 S-100 SM HM DS12 DS75 DS71 MA06 MA10 MA12 MD04 MD06 MD12 MS06

Function 30 Liters/Min (8 GPM) Adjustable Flow Control 113 Liters/Min (30 GPM) Priority-Type Flow Control Pressure Compensated Priority-Type Flow Control Pressure Compensated Priority-Type Flow Control Flow Divider/Combiner Sgl./Dbl. Pilot Operated Check Sgl./Dbl. Pilot Operated Check Diff. Area Poppet Relief Pilot Operated Relief Ball-Type Relief Ball-Type Relief P. O. Poppet Type Relief Ball-Type Crossover Relief Diff. Area Crossover Relief Hydraulic Pilot Pressure Hydraulic Pilot Pressure Manual Selector Manual Selector Manual Selector Manual Double Selector Valve 2-Way, Sol. Op. Stackable Valve Cam Operated 2-Way 2-Way, Solenoid Op, Bankable/Stackable 2-Position & 3-Position 4-Way Bankable/Stackable 2-Position & 3-Position 4-Way Bankable/Stackable 2-Position & 3-Position 4-Way Bankable/Stackable 2-Position, 6-Ported Selector 4-Way Bankable/Stackable

Pressure Flow 60 Liters/Min (16 GPM) 56 Liters/Min (15 GPM) 56 Liters/Min (15 GPM) 98 Liters/Min (26 GPM) 75 Liters/Min (20 GPM) 94 Liters/Min (25 GPM) 38 Liters/Min (10 GPM) 94 Liters/Min (25 GPM) 94 Liters/Min (25 GPM) 75 Liters/Min (20 GPM) 142 Liters/Min (38 GPM) 225 Liters/Min (60 GPM) 38 Liters/Min (10 GPM) 113 Liters/Min (30 GPM) 75 Liters/Min (20 GPM) 188 Liters/Min (50 GPM) 75 Liters/Min (20 GPM) 113 Liters/Min (30 GPM) 225 Liters/Min (60 GPM) 75 Liters/Min (20 GPM) 38 Liters/Min (10 GPM) 94 Liters/Min (25 GPM) 30 Liters/Min (8 GPM) 23 Liters/Min (6 GPM) 188 Liters/Min (50 GPM) 30 Liters/Min (8 GPM) 45 Liters/Min (12 GPM) 188 Liters/Min (50 GPM) 30 Liters/Min (8 GPM)

Pressure (SAE Porting) 207 Bar (3000 PSI) 207 Bar (3000 PSI) 172 Bar (2500 PSI) 241 Bar (3500 PSI) 172 Bar (2500 PSI) 207 Bar (3000 PSI) 207 Bar (3000 PSI) 207 Bar (3000 PSI) 345 Bar (5000 PSI) 172 Bar (2500 PSI) 172 Bar (2500 PSI) 345 Bar (5000 PSI) 172 Bar (2500 PSI) 345 Bar (5000 PSI) 207 Bar (3000 PSI) 345 Bar (5000 PSI) 207 Bar (3000 PSI) 207 Bar (3000 PSI) 172 Bar (2500 PSI) 207 Bar (3000 PSI) 207 Bar (3000 PSI) 207 Bar (3000 PSI) 207 Bar (3000 PSI) 207 Bar (3000 PSI) 207 Bar (3000 PSI) 207 Bar (3000 PSI) 207 Bar (3000 PSI)

(NTPF Porting) 138 Bar (2000 PSI) 138 Bar (2000 PSI) 138 Bar (2000 PSI 138 Bar (2000 PSI 138 Bar (2000 PSI) 138 Bar (2000 PSI) 138 Bar (2000 PSI) 138 Bar (2000 PSI) 138 Bar (2000 PSI) 138 Bar (2000 PSI) 138 Bar (2000 PSI) 138 Bar (2000 PSI) 138 Bar (2000 PSI) 138 Bar (2000 PSI) 138 Bar (2000 PSI) 138 Bar (2000 PSI) 138 Bar (2000 PSI) 138 Bar (2000 PSI) 138 Bar (2000 PSI) 138 Bar (2000 PSI)

22

Remote Control Systems

PCL4 PCL4-N
The PCL4 Series is a range of hydraulic pilot systems for the proportional remote control of hydraulically operated spool actuators and pump regulators, directional valves, pumps, motors, etc. in all kinds of mobile applicaSystem Type Control pressure range Control flow Individual control characteristics for each direction Selectable start and final pressures Selectable lever force Curves with straight characteristics Curves with two-step characteristics Curves with forced opening (final step) Friction brake for retention in any position Mechanical or electromagnetic end-position detent Hydraulic Pilot Pressure 1-69 Bar (14 - 1000 PSI) Max 4 liter/min (1 GPM) X X X X X X X X

tions. It is available with coordinate lever-units, as well as linear units for hand or foot control. All connection ports can be obtained with G, M14x1.5 or UNF connection threads. The coordinate valve is available in a version with all connections in the base plate. Up to 6 linear units can be built together in a block.

VP04

The VP04 is a pneumatic pilot valve for the proportional remote control of directional valves, positioning cylinders, etc. Either linear or coordinate-lever versions of the VP04 are available.

Principal applications include the proportional remote control of pneumatic spool-actuators and positioning cylinders in mobile hydraulic systems. All connections are furnished with couplings of the plug-in type. The signal ports can be obtained for 6mm or " O.D. hoses. The primary port and tank port are available in 6mm, 8mm, " or " I.D.

System Type Pneumatic Pilot Pressure Control pressure range Control flow Control curves with straight characteristics Mechanical end-position detent 0-8 Bar (0 - 115 PSI) Max 7 Nl/s (14.8 cfm) X X

Auxiliary Electronics
GRS 11 TOC 2
The GRS-11 time-tested control system provides reliable ground speed or manual control of granular and spinner requirements. On/Off, Auto/Manual, Blast and Pass, are the basic features required to combat any winter situation. The TOC 2 is a basic non-ground speed manual spreader control. This IQAN based electronic system provides an economical way to take the hydraulics out of the cab and provide proportional control of granular and spinner requirements.

23

Threaded Cartridge Valves

Product Highlights Standard cavities sizes from 420 Pressures to 345 Bar (5000 PSI) Flows up to 378 LPM (100 GPM) Steel and aluminum bodies New RESILONTM D-Ring Seal eliminates need for back-up rings; improves wear, extrusion and spiral failure resistance Spherical Poppet design assures accurate alignment and reduces leakage rating on many valves New crimp design eliminates adhesive between adapter and cage Solenoid Valves 10 standard termination options (and many specials) Many DC and AC voltages available Waterproof coil options Optional manual overrides Pressure Controls Zinc-coated (protection from salt spray) Knob and tamper-proof options Low profile design (fits in tight spaces)

Parker offers the broadest line of threaded cartridge, integrated packages and specialty valves in the industry. In addition, Parker is staffed with experienced cartridge and application engineers to design and specify products to meet customer applications.

Check/Shuttle Valves
Valve Type Check valves Ball type check valves 4-Bolt flange check valves Single & dual P.O. check valves Decompression check valves Shuttle valves Max Working Pressure Bar (PSI) 207 (3000) 345 (5000) 207 (3000) 207 (3000) 207 (3000) 207 (3000) 207 (3000) Max Flow Capacity Liters/Min (GPM) 83 (22) 378 (100) 95 (25) 606 (160) 95 (25) 189 (50) 113 (30)

Load/Motor Controls
Valve Type Counterbalance valves Motor control valves Max Working Pressure Bar (PSI) 207 (3000) 345 (5000) 207 (3000) Max Flow Capacity Liters/Min (GPM) 113 (30) 681 (180) 757 (200)

24

Threaded Cartridge Valves

Directional Control Valves

Valve Type Max Working Pressure Bar (PSI) 241 (3500) 241 (3500) 241 (3500) 241 (3500) 345 (5000) 345 (5000) 345 (5000) 345 (5000) 345 (5000) 345 (5000) Flow Capacity Liters/Min (GPM) 49 (13) 23 (6) 8 (2) 38 (10) 264 (70) 19 (5) 75 (20) 64 (17) 30 (8) 23 (6)

Manual valves Manual three-way valves Manual four-way valves Pilot operated valves Solenoid, poppet-type, two-way valves Solenoid, poppet-type, bidirectional valves Solenoid, spool-type, two-way valves Solenoid, spool-type, three-way valves Solenoid, spool-type, four-way valves Double solenoid, spool-type, four-way valves

Pressure Control Valves Photo

Valve Type Unloading relief valves Direct acting relief valves Pilot operated relief valves P.O. ventable relief valves Cross-over relief valves P.O. pressure reducing/relieving valves Direct acting pressure reducing/relieving valves Pressure reducing/relieving valves w/free reverse flow check Sequence valves P.O. sequence valves

Max Working Pressure Bar (PSI) 207 (3000) 207 (3000) 345 (5000) 345 (5000) 345 (5000) 345 (5000) 345 (5000) 207 (3000) 345 (5000) 345 (5000) 345 (5000)

Flow Capacity Liters/Min (GPM) 284 (75) 151 (40) 76 (20) 378 (100) 68 (18) 76 (20) 151 (40) 57 (15) 57 (15) 151 (40) 151 (40)

Specialty Valves
Valve Type Max Working Flow Pressure Capacity Bar (PSI) Liters/Min (GPM) 172 (2500) 241 (3500) 151 (40) 57 (15)

Flow Control Spreader Valve Filter Cartridge

25

Mobile Cylinders
Our standard single-acting telescopic cylinders can be used with almost any mounting setup: doghouse, bail, side frame, underbody, inverted mounts or inverted mount design. These cylinders, coupled with our dump pumps and PTOs, offer a variety of combinations that allow you to mount it and forget it. Design Features Longer sleeve overlap for stability External packing nuts add strength Beveled steel stop rings provide superior strength Hi-strength tubing has up to 27% greater cross-section area Chevron Packing and self-adjusting wave springs Wide rod bearings and improved, longer life urethane wiper rings Steel pin-eye mount Cylinder design that allows for easy repacking and repair

Parker offers single- or doubleacting telescopic cylinders and single- or double-acting rod type mobile cylinders, available with: Bore sizes from 3"14" Stroke up to 1270 cm (500") Operating pressures up to 689 Bar (10,000 PSI) Various materials and coatings - Chrome - Nitriding - Stainless steel - Double chrome

Typical Options - Load holding valves - Flow controls and fuses - End of stroke cushions Single-acting telescopics are available off the shelf or in production quantities. Parker can also design and manufacture cylinders to customer specifications from one piece to virtually any quantity.

NS 2500

Designed to work at 172 Bar (2500 PSI), the NS 2500 is the new standard in telescopic cylinders. With larger tube O.D. at every stage, this series outperforms the competition in lifting capacity. Other design features include: More lifting capacity Structurally stronger No bleeding required New seal and wiper technology Interchangeable with existing cylinder designs

NS 2500 Additional Design Improvements 31% increase in plunger column loading strength 20% greater side-loading capability Heavier wall thicknesses: " vs. ", all stages Butress threads vs.V thread design Available in 8" series

Lifting Capacity Comparison Stage Standard @ 138 Bar (2000 PSI) (lb) NS 2500 @ 138 Bar (2000 PSI) (lb) % Incr ease Increase NS 2500 @ 172 (2500 PSI) (lb) % Incr ease Increase 81/4" 98,034 106,913 9 133,641 36 71/4" 71,570 82,565 15 103,206 44 61/4" 51,935 61,359 18 76,699 48 51/4" 35,441 43,295 22 54,119 53 41/4" 22,089 28,373 28 35,466 61

26

Fixed Displacement Mobile Cylinders Low Speed High Torque

Standard Build
Our Standard Build program offers the benefit of standard tube and rod sizes with custom design options to create a highly engineered, quality cylinder configurable to provide quick delivery. Various mounting options are available. The configurable menu provides same day assembly drawings and same day pricing. Bill of Materials and manufacturing processes support a onetwo week lead time. Seal kits are available on same day delivery for consistent quality and standardization in service needs. Standard Build cylinders are manufactured with Parker Zero Leak sealing technology which offers the following benefits: Additional outside diameter lip that prevents contaminates from entering the system by bypassing the OD of the wiper body. Superior BTU rod seal increases the conformity of the seal to the rod. The second lip on the seal improves stability, limiting the rocking motion of the seal to reduce seepage Buffer ring acts as a primary seal and pressure spike suppressor. The combination of rod seal and buffer ring results in an exceptionally dry rod for longer life. Piston includes two wear rings and bronze filled PTFE seal designed for extension free, leak proof service 1045/1050 chrome plated, induction hardened, 100K rod reduces damage to rod and seal 1026 DOM cylinder tube bores are skived and roller burnished to provide precision finishes for extended seal life

Standard Build Program Welded Heavy Duty (WHD) Series

Various mounting options

Parker Zero Leak sealing package Various mounting options

1026 DOM skived and roller burnished tubing

1045/1050 100,000 yield induction hardened chrome plated rod

27

Motors
Small Frame
High volumetric efficiency Long life Full flow spline cooling High pressure shaft seal High flow shaft seal cooling High starting torque

TC

TB

TE

Frame size TC -0036 -0045 -0050 -0065 -0080 -0100 -0130 -0165 -0195 -0230 -0260 -0295 -0330 -0365 -0390 Displacement (cm3/rev) (in3/rev) 36 2.2 41 2.5 49 3.0 65 4.0 82 5.0 98 6.0 130 8.0 163 10.0 195 228 11.9 13.9 260 15.9 66 950 217 293 17.9 59 850 193 328 370 20.0 22.6 52 750 173 45 650 152 392 24.0 45 650 144

Max cont pressure (Bar) 86 (PSI) 1250 Max op speed (rpm) 902

86 86 86 86 86 86 86 86 76 1250 1250 1250 1250 1250 1250 1250 1250 1100 810 688 517 413 460 429 346 287 246

Frame size TB -0036 -0045 -0050 -0065 -0080 -0100 -0130 -0165 -0195 -0230 -0260 -0295 -0330 -0365 -0390 Displacement (cm3/rev) (in3/rev) 36 2.2 41 2.5 49 3.0 65 4.0 82 5.0 98 6.0 130 8.0 163 10.0 195 11.9 228 13.9 260 15.9 293 17.9 328 370 392 20.0 22.6 24.0

Max cont pressure (Bar) 124 124 124 124 124 124 124 124 124 103 100 97 93 86 83 (PSI) 1800 1800 1800 1800 1800 1800 1800 1800 1800 1500 1450 1400 1350 1250 1200 Max op speed (rpm) 932 785 678 511 409 454 430 343 287 246 216 191 171 151 143

Frame size TE -0036 -0045 -0050 -0065 -0080 -0100 -0130 -0165 -0195 -0230 -0260 -0295 -0330 -0365 -0390 Displacement (cm3/rev) (in3/rev) 36 2.2 41 2.5 49 3.0 65 4.0 82 5.0 98 6.0 130 8.0 163 10.0 195 12.0 228 14.0 260 16.0 293 18.0 328 20.0 370 22.6 392 24.0

Max cont pressure (Bar) 140 140 140 140 140 140 140 140 140 123 116 109 102 93 88 (PSI) 2030 2000 2000 2000 2000 2000 2000 2000 2000 1750 1650 1550 1450 1325 1250 Max op speed (rpm) 1141 1024 1020 877 695 582 438 348 292 328 287 256 228 203 191

Medium Frame

High volumetric efficiency Full flow spline cooling High pressure shaft seal High flow shaft seal cooling High starting torque High side load capacity Long life

TJ
Frame size TJ Displacement (cm /rev) (in3/rev) Max cont pressure (Bar) (PSI) Max op speed (rpm)
3

-0045 -0050 -0065 -0080 -0100 -0130 -0165 -0195 -0230 -0260 -0295 -0330 -0365 -0390 41 2.5 140 2030 1024 49 3.0 140 2030 1020 65 4.0 140 2030 877 82 5.0 140 2030 695 98 6.0 140 2030 582 130 8.0 140 2030 438 163 10.0 195 12.0 228 14.0 260 16.0 293 18.0 328 20.0 370 22.6 392 24.0

140 140 120 110 100 100 95 85 2030 2030 1740 1595 1450 1450 1378 1233 348 292 328 287 256 228 203 191

28

Motors
Large Frame TH
High volumetric efficiency Full flow spline cooling High pressure shaft seal High flow shaft seal cooling High starting torque High side load capacity Long life

TF TG
Frame size TF Displacement (cm3/rev) (in3/rev) Max cont pressure (Bar) (PSI) Max op speed (rpm) -0080 81 4.9 207 3000 693 -0100 100 6.1 155 2250 749 -0130 128 7.8 138 2000 583 -0140 141 8.6 138 2000 530 -0170 169 10.3 138 2000 444

TK
-0195 197 12.0 138 2000 381 -0240 238 14.5 138 2000 394 -0280 280 17.1 138 2000 334 -0360 -0405 364 22.2 130 1880 258 405 24.7 128 1850 231 -0475 477 29.1 113 1645 195

Frame size TG -0140 Displacement (cm3/rev) (in3/rev) Max cont pressure (Bar) (PSI) Max op speed (rpm) 140 8.6 207 3000 660

-0170 169 10.3 207 3000 554

-0195 -0290 -0295 195 11.9 207 3000 477 237 14.5 207 3000 393 280 17.1 207 3000 334

-0335 337 20.6 207 3000 277

-0405 405 24.7 172 2500 232

-0475 -0530 476 29.1 138 2000 237 529 32.3 138 2000 213

-0625 624 38.0 121 1750 182

-0785 786 48.0 103 1500 143

-0960 958 58.5 69 1000 118

Frame size TH Displacement (cm /rev) (in3/rev) Max continuous pressure (Bar) (PSI) Max operating speed (rpm)
3

-0140 -0170 -0195 -0290 -0295 -0335 -0405 -0475 -0530 -0625 -0785 -0960 140 8.6 207 3000 660 169 10.3 207 3000 554 195 11.9 207 3000 477 237 14.5 207 3000 393 280 17.1 207 3000 334 337 20.6 207 3000 277 405 24.7 172 2500 232 476 29.1 138 2000 237 529 32.3 138 2000 213 624 38.0 121 1750 182 786 48.0 103 1500 143 958 58.5 69 1000 118

Frame size TK Displacement (cm3/rev) (in3/rev) Max continuous pressure (Bar) (PSI) Max operating speed (rpm)

-0250 250 15.3 241 3500 523

-0315 315 19.2 241 3500 413

-0400 400 24.4 207 3000 373

-0500 500 30.5 207 3000 298

-0630 630 38.4 207 3000 237

-0800 800 48.8 190 2750 276

-1000 1000 61 172 2500 218

29

Filtration
Low Pressure Filters
Variety of mounting configurations High capacity/high efficiency Microglass lll media Visual and electrical indicators with several connector styles Flange options for low profile, easy mounting Integral breather (FT Series)

Model 12AT 50AT FTA FTB FTC RF4 RF7 IL2/RF2

Max Flow Liters/Min (GPM) 64 (17) 136 (36) 57 (15) 132 (35) 283 (75) 452 (120) 1131 (300) 452 (120)

Max Pressure Bar (PSI) 10.3 (150) 10.3 (150) 10.3 (150) 10.3 (150) 10.3 (150) 10.3 (150) 10.3 (150) 13.8 (200)

Mounting Style Spin-on Spin-on Tank top Tank top Tank top Tank top Tank top In-line, L-style

Medium Pressure Filters

NPT, SAE or flange ports High capacity/high efficiency Microglass II media Visual and electrical indicators with several connector styles Cartridge style bypass valve

Model 15CN 40CN 80CN

Max Flow Liters/Min (GPM) 94 (25) 302 (80) 452 (120)

Max Pressure Bar (PSI) 69 (1000) 69 (1000) 69 (1000)

Mounting Style In-line In-line In-line

30

Filtration
Portable/Offline Systems Provide flexibility for removing
contaminants from hydraulic fluid Guardian hand-held purification system with 15 LPM (4 GPM) flow rate Choice of two filter carts: 18 LPM (5 GPM) flow; 1892 LPM (500 GPM) SUS max; HP motor 37 LPM (10 GPM) flow; 11,356 LPM (3000 GPM) SUS max; HP motor

Reservoir Accessories
Non-metallic breathers and filler breathers Metallic breathers and filler breathers Triceptor desiccant type breathers Spin-on breathers Diffusers Fluid level/temperature gauges Suction strainers

31

Fluid Connectors
Hydraulic/Truck Hose
Parker offers a complete line of SAE and DOT specified hose and a wide variety of steel, brass and stainless steel fitting end configurations. Applications include petroleum based hydraulic fluids and lubricating oils, diesel fuels, crude, fuel oils and antifreeze solutions. Two piece 20 series field attachable hose assemblies are easily created, as are 26 series permanent hose assemblies with Parkrimp crimping units.

Thermoplastic Tubing & Hose

Parker DOT-approved nylon tubing and coils give long lasting, reliable performance for all air brake systems. Also reinforced hose in a wide range of materials to match your specific need in low-mediumand high pressure applications. Hoses that meet SAE 100R7 and 100R8. The Parflex line also includes many speciality hoses such as Teflon (PTFE), wire reinforced and non-conductive hose. Sizes from " through 1". Pressures from 17345 Bar (2505000 PSI).

32

Fluid Connectors
Hydraulic Adapters
Forged for strength and durability, Parker hydraulic adapters include JIC, Seal-lok o-ring face seal, pipe, flange, and JIS styles. Made from steel, stainless, and brass in inch and metric sizes, with pressures up to 620 Bar (9000 PSI).

Brass Fittings

Parker brass fittings set the world standard for low and medium pressure applications. Through innovations like our push-toconnect DOT airbrake Prestomatic fitting (available in both brass and composite material) we have the

products to meet your needs including airbrake NTA/AB, pipe, 45 degree flare, hose barb, compression, and inverted flare. Inch and metric sizes available. Prepackaged merchandising assortments also available.

Brass Valves

Parker offers a wide range of brass, carbon steel, and stainless steel ball valves with a large variety of end configurations. These are used as fuel shut-off lines and other general

purpose applications that require shut-off capability. Inch and metric sizes available. Lanyard valves are used with low pressure air systems such as air tanks on heavy trucks.

33

Fluid Connectors
Hydraulic/Pneumatic Quick Couplings
Parker offers the industrys broadest range of hydraulic and pneumatic couplers and nipples. Designs include ball locking, lever and thread-to-connect with poppet, ball or flush face valving. These are offered in brass, steel, stainless steel and plastic with a variety of fitting options. Special purpose couplings include flush face nonspill (HTMA/ISO), connect-underpressure, thread-to-connect and wing nut styles. Diagnostic nipples and equipment test pressure, temperature, RPM and flow.

Kit Department
Parkers Kit Department is dedicated to helping you streamline your operations by pre-assembling and packaging fluid connectors and related fluid-system components into a single kit, with a single part number and single invoice. Parker kits eliminate time wasted in parts collating. They eliminate the need for multiple suppliers, multiple invoices, and excess inventory. Kits lend themselves to just-in-time manufacturing, and ease in changing schedules. And packaging can be customized to your specific needs, such as subkitting for different workstations. Kits can include, but are not limited to, Parker components such as valves, connectors, filters, pumps, and flow control products. Kits may also incorporate purchased products such as nuts, bolts and brackets. Everything you need is delivered preassembled, in one convenient pack and ready for installation on your equipment. For more information contact your local Parker sales representative.

34

Sales Offices
North America
USA
Hydraulics Group Truck and Trailer Solutions Cleveland, OH Tel: (216) 896 3655 Eastern Region Cleveland, OH Tel: (440) 519 1125 Western Region San Ramon, CA Tel: (925) 735 9573

Middle East
Norway
Ski, Norway Tel: (47) 64 91 10 00

United Arab Emirates

Abu Dhabi, United Arab Emirates Tel: (971) 2 67 88 587

Poland
Warsaw, Poland Tel: (48) 22 863 49 42

Latin America
Pan American Division
Miami, FL Tel: (305) 470 8800

Portugal
Lea da Palmeira, Portugal Tel: (351) 22 9997 360

Argentina
Pcia. de Buenos Aires, Argentina Tel: (54) 3327 44 4129

Spain
Madrid, Spain Tel: (34) 91 675 73 00

Canada
Milton, Ontario Tel: 1 905 693 3020

Brazil
Cachoeirinha RS, Brazil Tel: (55) 51 470 2778

Sweden
Spnga, Sweden Tel: (46) 8 597 950 00

Mxico
Apodaca, N.L. Mexico Tel: (52) 81 56 6000

Venezuela
Caracas, Venezuela Tel: (58) 212 238 5422

Europe
Austria
Wiener Neustadt, Austria Tel: (43) 2622 23501

Asia Pacific
Australia
AU-Castle Hill, Australia Tel: (61) 2-9634 7777

Africa
South Africa
Republic of South Africa Tel: (27) (0)11-961 0700

China
Cheung Sha Wan, Kowloon Hong Kong Tel: (852) 2428 8008 Shanghai, PR China Tel: (86) 21 6445 9339

Belgium
Nivelles, Belgium Tel: (32) 67 280 900

Czech Republic
Prague 8, Czech Republic Tel: (420) 2 830 85 221

India
Navi Mumbai, India Tel: (91) 22 55907081-85

Germany-Sales Location
Kaarst, Germany Tel: (49) 2131 4016 0

Korea
Kyunggi-do, Korea Tel: (82) 2 559 0400

Denmark
Ballerup, Denmark Tel: (45) 4356 0400

New Zealand
East Tamaki, New Zealand Tel: (64) 9 273 8944

United Kingdom
Warwick, England Tel: (44) 1926 317 878

Japan
Tokyo, Japan Tel: (81) 3 6408 3900

Finland
Vantaa, Finland Tel: (358) 9 4767 31

Singapore
Republic of Singapore Tel: (65) 862 34 33

France
Contamine-sur-Arve, France Tel: (33) 450 25 80 25

Taiwan
Taipei, Taiwan Tel: (886) 2 8787 3780

Hungary
Budapest, Hungary Tel: (36) 1 252 8137

Russia
Moscow, Russia Tel/Fax: (7) 095 234 0054

Italy
Corsico, Milano, Italy Tel: (39) 02 45 19 21

Thailand
Bangkok, Thailand Tel: (662) 717 8140

The Netherlands
Oldenzaal, Netherlands Tel: (31) 541 585000

35

Contact Information
Tel 1-800-CPARKER Fax 1-216-896-4031 www.parker.com/truckhydraulics Email [email protected]

You can also access Truck Hydraulics through www.parker.com/mobilesystems

! WARNING
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application, including consequences of any failure, and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.

Offer of Sale
The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the full Offer of Sale.

36

CD Catalog
System Requirements To view the CD, the following are required: Pentium-class processor Win 95 OSR 2.0, Win 98 Sec. Ed., Win ME, Win NT 4.0 (with Service Pack 5 or 6), Win 2000 or Win XP 16 MB of RAM (32 recommended) 20 MB of available hard-disk space Acrobat Reader Catalog files are viewed using Adobe Acrobat Reader. If you do not have Acrobat Reader installed on your PC, it will install from the CD. If you have Acrobat Reader but do not have the search plug-in, you will be given the option to either install Acrobat Reader 5.0 with search, leaving your existing version, or not install Acrobat Reader 5.0 with search.
You must have the search plug-in to take advantage of the search feature described in the next section.

To View the CD The CD is self-loading. Just place it in your CD drive. Acrobat Reader will open (or install), and the opening page will appear on your monitor. From this page you can navigate to the following sections.

Search takes you to the search feature. When the search window opens, type a word(s) or code* and press enter. A list of pages where that word appears is shown. Select one and click the View button. Repeat as needed. Contents takes you to the selection of catalogs and products on the CD. Product Overview takes you to a .pdf file of this Truck Hydraulic Product Range. Warning/Offer of Sale takes you to these legal documents. Getting Started provides a summary of how to navigate using Acrobat Reader. Contact Us provides you with phone, fax and online information. Text links are easily identified by blue type. The catalog files are fully bookmarked to make navigation quick and easy. Each catalog also has a bookmark which will take you to the Parker web home page for that division if you are online while you are viewing the CD. You must first enter your web browser information into the Acrobat preferences.
Adobe and Acrobat are registered trademarks of Adobe Systems Inc. Windows is a registered trademark of Microsoft Corp.

anything possible

Parker Hannifin Corporation Hydraulics Group Truck and Trailer Solutions 6035 Parkland Blvd. Cleveland, OH 44124 Tel: 216-896-3655 Fax: 216-896-4031 www.parker.com/truckhydraulics

Bulletin HY19-1004/US 5M 4/04 SL