Electrostatics
Electrostatics
Electrostatics
Electrostatics
Electromagnetism
Electricity Magnetism
e [1]
v t
Electrostatics is a branch of physics that deals with the phenomena and properties of stationary or slow-moving electric charges with no acceleration. Since classical antiquity, it has been known that some materials such as amber attract lightweight particles after rubbing. The Greek word for amber, electron, was the source of the word 'electricity'. Electrostatic phenomena arise from the forces that electric charges exert on each other. Such forces are described by Coulomb's law. Even Paper shavings attracted by a charged CD though electrostatically induced forces seem to be rather weak, the electrostatic force between e.g. an electron and a proton, that together make up a hydrogen atom, is about 36 orders of magnitude stronger than the gravitational force acting between them. There are many examples of electrostatic phenomena, from those as simple as the attraction of the plastic wrap to your hand after you remove it from a package, to the apparently spontaneous explosion of grain silos, to damage of electronic components during manufacturing, to the operation of photocopiers. Electrostatics involves the buildup of charge on the surface of objects due to contact with other surfaces. Although charge exchange happens whenever any two surfaces contact and separate, the effects of charge exchange are usually only noticed when at least one of the surfaces has a high resistance to electrical flow. This is because the charges that transfer to or from the highly resistive surface are more or less trapped there for a long enough time for their effects to be observed. These charges then remain on the object until they either bleed off to ground or are quickly neutralized by a discharge: e.g., the familiar phenomenon of a static 'shock' is caused by the neutralization of charge built up in the body from contact with nonconductive surfaces.
Electrostatics
Coulomb's law
We begin with Coulomb's Law for the magnitude of the electrostatic force (in newtons) between two point charges and (in coulombs). It is convenient to label one of these charges, , as a test charge, and call a source charge. As we develop the theory, more source charges will be added. If charges, then the force is: is the distance (in meters) between two
The SI units of 0 are equivalently A2s4 kg1m3 or C2N1m2 or F m1. Coulomb's constant is:
The use of 0 instead of k0 in expressing Coulomb's Law is related to the fact that the force is inversely proportional to the surface area of a sphere with radius equal to the separation between the two charges. A single proton has a charge of e, and the electron has a charge of e, where,
These physical constants (0, k0, e) are currently defined so that 0 and k0 are exactly defined, and e is a measured quantity.
Electric field
Electric field lines are useful for visualizing the electric field. Field lines begin on positive charge and terminate on negative charge, and are parallel to the direction of the electric field. The density of electric field lines is a measure of the magnitude of the electric field at any given point. The electric field, , (in units of volts per meter) is a vector field that can be defined everywhere, except at the location of point charges (where it diverges to infinity). It is convenient to place a hypothetical test charge at a point (where no charges are present). By Coulomb's Law, this test charge will experience a force that can be used to define the electric field as follow
(See the Lorentz equation if the charge is not stationary.) Consider a collection of (called the field point) is:
The electrostatic field (lines with arrows) of a nearby positive charge (+) causes the mobile charges in conductive objects to separate due to electrostatic induction. Negative charges (blue) are attracted and move to the surface of the object facing the external charge. Positive charges (red) are repelled and move to the surface facing away. These induced surface charges are exactly the right size and shape so their opposing electric field cancels the electric field of the external charge throughout the interior of the metal. Therefore the electrostatic field everywhere inside a conductive object is zero, and the electrostatic potential is constant.
particles of charge
, located at points
Electrostatics
where
, and
is
a unit vector that indicates the direction of the field. For a single point charge at the origin, the magnitude of this electric field is and points away from that charge is positive. That fact that the force (and hence the field) can be calculated by summing over all the contributions due to individual source particles is an example of the superposition principle. The electric field produced by a distribution of charges is given by the volume charge density can be obtained by converting this sum into a triple integral:
Gauss's law
Gauss's law states that "the total electric flux through any closed hypothetical surface of any shape drawn in an electric field is proportional to the total electric charge enclosed within the surface". Mathematically, Gauss's law takes the form of an integral equation:
where by or
is a volume element. If the charge is distributed over a surface or along a line, replace . The Divergence Theorem allows Gauss's Law to be written in differential form:
where
This relationship is a form of Poisson's equation. In the absence of unpaired electric charge, the equation becomes Laplace's equation:
Electrostatic approximation
The validity of the electrostatic approximation rests on the assumption that the electric field is irrotational:
From Faraday's law, this assumption implies the absence or near-absence of time-varying magnetic fields:
In other words, electrostatics does not require the absence of magnetic fields or electric currents. Rather, if magnetic fields or electric currents do exist, they must not change with time, or in the worst-case, they must change with time only very slowly. In some problems, both electrostatics and magnetostatics may be required for accurate predictions, but the coupling between the two can still be ignored.
Electrostatics
Electrostatic potential
Because the electric field is irrotational, it is possible to express the electric field as the gradient of a scalar function, , called the electrostatic potential (also known as the voltage). An electric field, , points from regions of high electric potential to regions of low electric potential, expressed mathematically as
The Gradient Theorem can be used to establish that the electrostatic potential is the amount of work per unit charge required to move a charge from point to point is the following line integral:
From these equations, we see that the electric potential is constant in any region for which the electric field vanishes (such as occurs inside a conducting object).
Electrostatic energy
A single test particle's potential energy, points . This potential energy (in Joules) is: , can be calculated from a line integral of the work, particles of charge . We integrate from a point at infinity, and assume a collection of , are already situated at the
where
, and
is the electric potential that would be at the potential energy is by assembling these particles one at a time:
if the test charge were not present. If only two charges are present,
if the charge
excludes the (infinite) energy that would be required to assemble each point charge from a disperse cloud of charge. The sum over charges can be converted into an integral over charge density using the prescription : , This second expression for electrostatic energy uses the fact that the electric field is the negative gradient of the electric potential, as well as vector calculus identities in a way that resembles integration by parts. These two integrals for electric field energy seem to indicate two mutually exclusive formulas for electrostatic energy density, namely all space. and ; they yield equal values for the total electrostatic energy only if both are integrated over
Electrostatics
Electrostatic pressure
On a conductor, a surface charge will experience a force in the presence of an electric field. This force is the average of the discontinuous electric field at the surface charge. This average in terms of the field just outside the surface amounts to: , This pressure tends to draw the conductor into the field, regardless of the sign of the surface charge.
Triboelectric series
The triboelectric effect is a type of contact electrification in which certain materials become electrically charged when they are brought into contact with a different material and then separated. One of the materials acquires a positive charge, and the other acquires an equal negative charge. The polarity and strength of the charges produced differ according to the materials, surface roughness, temperature, strain, and other properties. Amber, for example, can acquire an electric charge by friction with a material like wool. This property, first recorded by Thales of Miletus, was the first electrical phenomenon investigated by man. Other examples of materials that can acquire a significant charge when rubbed together include glass rubbed with silk, and hard rubber rubbed with fur.
Electrostatic generators
The presence of surface charge imbalance means that the objects will exhibit attractive or repulsive forces. This surface charge imbalance, which yields static electricity, can be generated by touching two differing surfaces together and then separating them due to the phenomena of contact electrification and the triboelectric effect. Rubbing two nonconductive objects generates a great amount of static electricity. This is not just the result of friction; two nonconductive surfaces can become charged by just being placed one on top of the other. Since most surfaces have a rough texture, it takes longer to achieve charging through contact than through rubbing. Rubbing objects together increases amount of adhesive contact between the two surfaces. Usually insulators, e.g., substances that do not conduct electricity, are good at both generating, and holding, a surface charge. Some examples of these substances are rubber, plastic, glass, and pith. Conductive objects only rarely generate charge imbalance except, for example, when a metal surface is impacted by solid or liquid nonconductors. The charge that is transferred during contact electrification is stored on the surface of each object. Static electric generators, devices which produce very high voltage at very low current and used for classroom physics demonstrations, rely on this effect. Note that the presence of electric current does not detract from the electrostatic forces nor from the sparking, from the corona discharge, or other phenomena. Both phenomena can exist simultaneously in the same system. See also: Friction machines, Wimshurst machines, and Van de Graaff generators.
Charge neutralization
Natural electrostatic phenomena are most familiar as an occasional annoyance in seasons of low humidity, but can be destructive and harmful in some situations (e.g. electronics manufacturing). When working in direct contact with integrated circuit electronics (especially delicate MOSFETs), or in the presence of flammable gas, care must be taken to avoid accumulating and suddenly discharging a static charge (see electrostatic discharge).
Charge induction
Charge induction occurs when a negatively charged object repels electrons from the surface of a second object. This creates a region in the second object that is more positively charged. An attractive force is then exerted between the objects. For example, when a balloon is rubbed, the balloon will stick to the wall as an attractive force is exerted by
Electrostatics two oppositely charged surfaces (the surface of the wall gains an electric charge due to charge induction, as the free electrons at the surface of the wall are repelled by the negative balloon, creating a positive wall surface, which is subsequently attracted to the surface of the balloon). You can explore the effect with a simulation of the balloon and static electricity. [2]
'Static' electricity
Before the year 1832, when Michael Faraday published the results of his experiment on the identity of electricities, physicists thought "static electricity" was somehow different from other electrical charges. Michael Faraday proved that the electricity induced from the magnet, voltaic electricity produced by a battery, and static electricity are all the same. Static electricity is usually caused when certain materials are rubbed against each other, like wool on plastic or the soles of shoes on carpet. The process causes electrons to be pulled from the surface of one material and relocated on the surface of the other material. A static shock occurs when the surface of the second material, negatively charged with electrons, touches a positively-charged conductor, or vice-versa. Static electricity is commonly used in xerography, air filters, and some automotive paints. Static electricity is a build up of electric charges on two objects that have become separated from each other. Small electrical components can easily be damaged by static electricity. Component manufacturers use a number of antistatic devices to avoid this.
Electrostatics dissipated after 4 to 5 times the relaxation time, or 90 seconds for the fluid in the above example. Charge generation increases at higher fluid velocities and larger pipe diameters, becoming quite significant in pipes 8 inches (200mm) or larger. Static charge generation in these systems is best controlled by limiting fluid velocity. The British standard BS PD CLC/TR 50404:2003 (formerly BS-5958-Part 2) Code of Practice for Control of Undesirable Static Electricity prescribes velocity limits. Because of its large impact on dielectric constant, the recommended velocity for hydrocarbon fluids containing water should be limited to 1m/s. Bonding and earthing are the usual ways by which charge buildup can be prevented. For fluids with electrical conductivity below 10 pS/m, bonding and earthing are not adequate for charge dissipation, and anti-static additives may be required. Applicable standards 1.BS PD CLC/TR 50404:2003 Code of Practice for Control of Undesirable Static Electricity 2.NFPA 77 (2007) Recommended Practice on Static Electricity 3.API RP 2003 (1998) Protection Against Ignitions Arising Out of Static, Lightning, and Stray Currents
References
Faraday, Michael (1839). Experimental Researches in Electricity. London: Royal Inst. e-book at Project Gutenberg Halliday, David; Robert Resnick; Kenneth S. Krane (1992). Physics. New York: John Wiley & Sons. ISBN0-471-80457-6. Griffiths, David J. (1999). Introduction to Electrodynamics. Upper Saddle River, NJ: Prentice Hall. ISBN0-13-805326-X. Hermann A. Haus and James R. Melcher (1989). Electromagnetic Fields and Energy. Englewood Cliffs, NJ: Prentice-Hall. ISBN0-13-249020-X.
[1] http:/ / en. wikipedia. org/ w/ index. php?title=Template:Electromagnetism& action=edit [2] http:/ / phet. colorado. edu/ new/ simulations/ sims. php?sim=Balloons_and_Static_Electricity
Further reading
Essays William J. Beaty, " Humans and sparks; The Cause, Stopping the Pain, and 'Electric People (http://amasci.com/ emotor/zapped.html)". 1997. Books William Cecil Dampier, "The theory of experimental electricity". Cambridge [Eng.] University press, 1905 (Cambridge physical series). xi, 334 p. illus., diagrs. 23cm. LCCN 05040419 //r33 William Thomson Kelvin, Reprint of Papers on Electrostatics and Magnetism By William Thomson Kelvin (http:/ /books.google.com/books?id=Y_QEAAAAYAAJ), Macmillan 1872 Alexander MacAulay Utility of Quaternions in Physics. ElectrostaticsGeneral Problem (http://books.google. com/books?id=EAI5AAAAMAAJ&pg=PA55). Macmillan 1893
Electrostatics Alexander Russell, A Treatise on the Theory of Alternating Currents. Electrostatics (http://books.google.com/ books?id=fJQ3AAAAMAAJ&pg=PA2). University Press 1904
External links
Man's static jacket sparks alert (http://news.bbc.co.uk/2/hi/asia-pacific/4252692.stm)". BBC News, 16 September 2005. Static Electricity and Plastics (http://www.zeusinc.com/pdf/Zeus_Static.pdf)Wikipedia:Link rot " Can shocks from static electricity damage your health? (http://wolfsonelectrostatics.com/news/news-item12. asp)". Wolfson Electrostatics News pages. Invisible wall of static: (http://amasci.com/weird/unusual/e-wall.html) Downloadable electrostatic BEM modules in MATLAB for simple capacitance problems (http://www. nevaelectromagnetics.com/ElectrostaticsModeling.html) Introduction to Electrostatics: PointchargescanbetreatedasadistributionusingtheDiracdeltafunction (http:// physics.gmu.edu/~joe/PHYS685/Topic1.pdf)
Library resources about Electrostatics
License
Creative Commons Attribution-Share Alike 3.0 //creativecommons.org/licenses/by-sa/3.0/