Scribd
Upload
2K views4 pages

XLPE HV Cable Construction

Uploaded by

AnasSalem
The document describes the typical construction of single core and three core high voltage XLPE cables. It explains that single core cables can be unarmored or armored, and three core cables can also be unarmored or armored. The typical components of these cables are a copper conductor, internal and external semiconductor screens, XLPE insulation, metallic screen, fillers or bedding, armor, and an outer sheath. It provides brief descriptions of the functions and typical compositions of each of these main components.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
2K views4 pages

XLPE HV Cable Construction

Uploaded by

AnasSalem
The document describes the typical construction of single core and three core high voltage XLPE cables. It explains that single core cables can be unarmored or armored, and three core cables can also be unarmored or armored. The typical components of these cables are a copper conductor, internal and external semiconductor screens, XLPE insulation, metallic screen, fillers or bedding, armor, and an outer sheath. It provides brief descriptions of the functions and typical compositions of each of these main components.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
Download as pdf or txt
You are on page 1/ 4

HV XLPE , Cable Construction (general)

SINGLE CORE - XLPE- UNARMOURED 1-Copper conductor. 2- Semiconductive conductor screen (Internal). 3-XLPE insulation. 4- Semiconductive insulation screen (External). 5- Copper wire screen. 6- Tape binder. 7- Outer sheath.

SINGLE CORE - XLPE- ARMOURED 1-Copper conductor. 2- Semiconductive conductor screen (Internal). 3-XLPE insulation. 4- Semiconductive insulation screen (External). 5- Copper tape screen. 6- Bedding. 7- Aluminum armour. 8- Outer sheath.

P Pa ag ge e1 1

THREE CORE - XLPE- UNARMOURED 1-Copper conductor. 2- Semiconductive conductor screen (Internal). 3-XLPE insulation. 4- Semiconductive insulation screen (External). 5- Copper tape screen. 6- Fillers. 7- Tape binder. 8- Outer sheath.

THREE CORE - XLPE- ARMOURED 1-Copper conductor. 2- Semiconductive conductor screen (Internal). 3-XLPE insulation. 4- Semiconductive insulation screen (External). 5- Copper tape screen. 6- Fillers. 7- Tape binder. 8- Bedding. 9- Galvanized steel wire armour. 10- Outer sheath.

P Pa ag ge e2 2

Item Conductor

Function
To carry current -under normal operating conditions. -under overload operating conditions. - under short circuit operating conditions. To withstand pulling stresses during cable laying. To maintain a uniform electric field and minimize electrostatic stresses (voltage stress control layer). To withstand the various voltage field stresses during the cable service life: - rated voltage. - lightening overvoltage. -switching overvoltage. To maintain a uniform electric field and minimize electrostatic stresses (voltage stress control layer). To provide: - An electric screen (no electric field outside the cable). - An active conductor for the capacitive and earth fault short circuit current. - A contribution to mechanical protection. In the case of three core cables, it is used to fill the interstices between the three cores.

Composition
Compact round stranded cable with copper or aluminium wires.

Semiconductive Conductor Screen (Internal Semiconductor) Insulation

Semiconducting material. XLPE

Semiconductive Insulation Screen (External Semiconductor) Metallic Screen

Semiconducting material.

Copper tape/wires or extruded lead alloy

Filler

Soft polymer material.

P Pa ag ge e3 3

Item Tape Binder Bedding

Function
Wrapped round the assembly to form a compact circular cable. To keep the bundle together. To provide sound bedding for the metallic armour. This guards against mechanical damage to the cable.

Composition
Polyester (Non-conducting). Polyvinyl chloride (PVC) or polyethylene (PE) compound, extruded over the laid up three core cable or on the screened single core cables. Aluminium (non-magnetic ) wire/tape armour is used for single core cables. Steel wire /tape armour is used for three phase cables.

Armour

Outer Sheath

For overall mechanical, weather, chemical and electrical protection. Outer semi conductive layer or graphite coating for testing purpose.

PVC or PE, plus : Extruded semi conductive layer or graphite coating is applied over the outer sheath for testing purpose of the non-metallic outer sheath.

Cable construction may includes additional layers, according to some specific requirements.

P Pa ag ge e4 4

You might also like