Isoflex Topas NB 52 152

Product information
ISOFLEX TOPAS NB 52, NB 152

Synthetic rolling and plain bearing greases
Benefits for your application
Longer component life when exposed to water or aqueous media due to special thickener
Many years of successful use in the automotive and machine building industries
Description
rolling and plain bearings subject to high speeds and loads,

also for low temperatures,
ISOFLEX TOPAS NB 52 and ISOFLEX TOPAS NB 152 are rolling

and plain bearing greases based on a synthetic hydrocarbon oil
and a barium complex soap. The special barium-soap thickener
used in the ISOFLEX TOPAS NB 52 and 152 greases offers good
load-carrying capacity as well as resistance to water and ambient
media unlike other soap-based thickeners. Both products show
good protection against corrosion as well as oxidation and ageing
stability. The Klber barium complex soap is ELINCS-registered
and approved by GASG (Global Automotive Stakeholders Group).
tooth flanks in precision gears, e.g. bevel gears in milling

machines, electromechanical actuators for valves,
electric contacts and components to reduce insertion forces.
ISOFLEX TOPAS NB 152 can be used in a wide service

temperature range from -40 C to 150 C. ISOFLEX TOPAS NB
52 is suitable for temperatures between -50 C to 120 C and
short peak temperatures up to 150 C depending on the
application, e.g. enclosed gears.
In addition, ISOFLEX TOPAS NB 152 is compatible with many

plastics.
ISOFLEX TOPAS NB 152 is primarily used for rolling and plain
bearings, for example wheel bearings in racing cars, fan bearings,
pump bearings. The grease is also suitable for plastic/plastic or
steel/plastic friction points.
Application notes
Application
The greases are applied by spatula, brush, grease gun or

cartridge. Sprays should not be exposed to direct sunlight and
temperatures above 50 C.
ISOFLEX TOPAS NB 52 is a versatile grease for many

applications, e.g.
Material safety data sheets

Material safety data sheets can be requested via our website
www.klueber.com. You may also obtain them through your
contact person at Klber Lubrication.
Pack sizes
ISOFLEX TOPAS
NB 152
ISOFLEX TOPAS
NB 52
ISOFLEX TOPAS
NB 52 Spray
Aerosol can 400 ml
Cartridge 400 g
Can 1 kg
Bucket 25 kg
ISOFLEX TOPAS NB 52, NB 152 , Prod. 004131, 004145, 081326, en

Edition 23.03.2014 [replaces edition 14.02.2014]
Product information

Product data
ISOFLEX TOPAS
NB 52
ISOFLEX TOPAS
NB 52 Spray
ISOFLEX TOPAS
NB 152
Article number
004131
081326
004145
Chemical composition, thickener
barium complex
soap
barium complex
soap
barium complex
soap
Chemical composition, type of oil
synthetic
hydrocarbon oil
synthetic
hydrocarbon oil
synthetic
hydrocarbon oil
Lower service temperature
-50 C / -58 F
-50 C / -58 F
-40 C / -40 F
Upper service temperature
120 C / 248 F
120 C / 248 F
150 C / 302 F
Colour space
beige
beige
beige
Texture
homogeneous
homogeneous
homogeneous
Texture
short-fibred
short-fibred
fibrous
Density at 20 C
approx. 0.96 g/cm
approx. 0.96 g/cm
approx. 0.96 g/cm
Worked penetration, DIN ISO 2137, 25 C, lower limit value
265 x 0.1 mm
265 x 0.1 mm
265 x 0.1 mm
Worked penetration, DIN ISO 2137, 25 C, upper limit value
295 x 0.1 mm
295 x 0.1 mm
295 x 0.1 mm
Shear viscosity at 25 C, shear rate 300 s-1, equipment:

rotational viscometer, lower limit value
4 000 mPas
4 000 mPas
5 500 mPas
Shear viscosity at 25C, shear rate 300 s-1, equipment:rotational 8 000 mPas
viscometer, upper limit value
8 000 mPas
9 500 mPas
Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D

7042, 100 C
approx. 5.9 mm/s
approx. 5.9 mm/s
approx. 14.5 mm/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM

D-445/ASTM D 7042, 40 C
approx. 30 mm/s
approx. 30 mm/s
approx. 100 mm/s
Corrosion inhibiting properties of lubricating greases, DIN 51802, 0 corrosion degree

(SKF-EMCOR), test duration: 1 week, distilled water
0 corrosion degree
0 corrosion degree
Copper corrosion, DIN 51811, (lubricating grease), 24h/100C
1 - 100 corrosion
degree
1 - 100 corrosion
degree
Copper corrosion, DIN 51811, (lubricating grease), 24h/120 C
1 - 120 corrosion
degree
Oil separation, ASTM D 6184 [FTMS 791 C 321], after 30 h/100

C
<= 3 % by weight
<= 3 % by weight
<= 2 % by weight
Drop point, DIN ISO 2176
>= 240 C
>= 240 C
>= 240 C
Oxidation stability of lubricating greases, ASTM D942, 100 h/99

C, pressure drop
<= 0.3 bar
<= 0.3 bar
<= 0.1 bar
Speed factor (n x dm)
approx. 1 000 000

mm/min
approx. 1 000 000

mm/min
approx. 600 000

mm/min
Water resistance, DIN 51807 pt. 01, 3 h/90 C, rating
<= 1 - 90
<= 1 - 90
0 - 90
Minimum shelf life from the date of manufacture - in a dry, frostfree place and in the unopened original container, approx.
36 months
24 months
36 months
ISOFLEX TOPAS NB 52, NB 152 , Prod. 004131, 004145, 081326, en

Edition 23.03.2014 [replaces edition 14.02.2014]
Product information

Klber Lubrication your global specialist

Innovative tribological solutions are our passion. Through
personal contact and consultation, we help our customers
to be successful worldwide, in all industries and markets.
With our ambitious technical concepts and experienced,
competent staff we have been fulfilling increasingly
demanding requirements by manufacturing efficient highperformance lubricants for more than 80 years.
Klber Lubrication Mnchen SE & Co. KG /

Geisenhausenerstrae 7 / 81379 Mnchen / Germany /
phone +49 89 7876-0 / fax +49 89 7876-333.
The data in this document is based on our general experience and knowledge
at the time of publication and is intended to give information of possible
applications to a reader with technical experience. It constitutes neither an
assurance of product properties nor does it release the user from the
obligation of performing preliminary field tests with the product selected for a
specific application. All data are guide values which depend on the lubricant's
composition, the intended use and the application method. The technical
values of lubricants change depending on the mechanical, dynamical, chemical
and thermal loads, time and pressure. These changes may affect the function
of a component. We recommend contacting us to discuss your specific
application. If possible we will be pleased to provide a sample for testing on
request. Klber products are continually improved. Therefore, Klber
Lubrication reserves the right to change all the technical data in this document
at any time without notice.
Publisher and Copyright: Klber Lubrication Mnchen SE & Co. KG. Reprints,
total or in part, are permitted only prior consultation with Klber Lubrication
Mnchen SE & Co. KG and if source is indicated and voucher copy is
forwarded.
a company of the Freudenberg Group

Isoflex Topas NB 52 152

Uploaded by

Isoflex Topas NB 52 152

Uploaded by

Product information

ISOFLEX TOPAS NB 52, NB 152

Benefits for your application

rolling and plain bearings subject to high speeds and loads,

ISOFLEX TOPAS NB 52 and ISOFLEX TOPAS NB 152 are rolling

tooth flanks in precision gears, e.g. bevel gears in milling

electric contacts and components to reduce insertion forces.

ISOFLEX TOPAS NB 152 can be used in a wide service

In addition, ISOFLEX TOPAS NB 152 is compatible with many

The greases are applied by spatula, brush, grease gun or

ISOFLEX TOPAS NB 52 is a versatile grease for many

Material safety data sheets

Aerosol can 400 ml

ISOFLEX TOPAS NB 52, NB 152 , Prod. 004131, 004145, 081326, en

ISOFLEX TOPAS NB 52, NB 152

Chemical composition, thickener

Chemical composition, type of oil

Lower service temperature

Upper service temperature

approx. 0.96 g/cm

approx. 0.96 g/cm

approx. 0.96 g/cm

Worked penetration, DIN ISO 2137, 25 C, lower limit value

Worked penetration, DIN ISO 2137, 25 C, upper limit value

Shear viscosity at 25 C, shear rate 300 s-1, equipment:

Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D

approx. 5.9 mm/s

approx. 5.9 mm/s

approx. 14.5 mm/s

Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM

approx. 100 mm/s

Corrosion inhibiting properties of lubricating greases, DIN 51802, 0 corrosion degree

Copper corrosion, DIN 51811, (lubricating grease), 24h/100C

Copper corrosion, DIN 51811, (lubricating grease), 24h/120 C

Oil separation, ASTM D 6184 [FTMS 791 C 321], after 30 h/100

Drop point, DIN ISO 2176

Oxidation stability of lubricating greases, ASTM D942, 100 h/99

<= 0.3 bar

<= 0.3 bar

<= 0.1 bar

Speed factor (n x dm)

approx. 1 000 000

approx. 1 000 000

approx. 600 000

Water resistance, DIN 51807 pt. 01, 3 h/90 C, rating

ISOFLEX TOPAS NB 52, NB 152 , Prod. 004131, 004145, 081326, en

ISOFLEX TOPAS NB 52, NB 152

Klber Lubrication your global specialist

Klber Lubrication Mnchen SE & Co. KG /

a company of the Freudenberg Group

You might also like