LabView Mathscript and Formula Node
LabView Mathscript and Formula Node
Overview
The Formula Node in the LabVIEW software is a convenient, text-based node you can use to perform complicated mathematical operations on a block diagram using the C++ syntax structure. It is
most useful for equations that have many variables or are otherwise complicated. The text-based code simplifies the block diagram and increases its readability. Furthermore, you can copy and
paste existing code directly into the Formula Node rather than recreating it graphically.
Table of Contents
In addition to text-based equation expressions, the Formula Node can accept text-based versions of if statements, while loops, for loops, and do loops, which are familiar to C programmers. These
programming elements are similar but not identical to those you find in C programming.
The MathScript Node implements similar functions but with the additional functionality of a full .m file compiler, making it useful as a textual language for signal processing, analysis, and math.
LabVIEW MathScript is generally compatible with .m file script syntax, which is widely used by alternative technical computing software. For LabVIEW 2009 and later, the LabVIEW MathScript
features are released separately in the LabVIEW MathScript RT Module.
Note: It is considered good programming practice to keep the inputs on the left border and the outputs on the right border of the Formula Node. This helps you follow the data flow in your VI and
keep your code organized.
1. Enter the expressions below in the Formula Node. Make sure that you complete each command with a semicolon. Notice, however, that the if statement does not require a semicolon after the
first line.
if (x*y>0)
z1 = 3*x**2 - 2*y**3;
else z1 = 0;
z2 = sinh(z1);
1. Create controls and indicators for the inputs and outputs.
1. Right-click on each input and select CreateControl from the shortcut menu.
1/3
www.ni.com
1. Right-click on each output and select CreateIndicator from the shortcut menu.
1. Place a While Loop with a stop button around the Formula Node and the controls. Be sure to include a Wait (ms) function inside the loop to conserve memory usage. Your block diagram
should appear as follows.
1. Click the Run button to run the VI. Change the values of the input controls to see how the outputs change.
In this case, the Formula Node helps minimize the space required on the block diagram. Accomplishing the same task without the use of a Formula Node requires the following code.
Resources
For more information on the Formula Node syntax or the functions available, see the LabVIEW Help by pressing the <Ctrl-H> keys while you are developing your code. This opens the Context
Help window, which includes information about the feature that your mouse is hovering over. In the Context Help window, select Detailed help for more information.
2/3
www.ni.com
1. On the front panel, expand the arrays to show multiple elements. With the cursor, grab the bottom middle selector of the array and drag it down to show multiple elements.
1. Begin by placing a 1, 2, and 3 in the first three elements of the x control. Your front panel should look similar to the one below. Note that the fourth and fifth elements are grayed out. This is
because they are not initialized. You can initialize them by clicking inside the cell and entering a value. To uninitialize a cell, right-click the element and select Data OperationsDelete
Element from the shortcut menu.
1. Click the Run button. Change the values of the elements in the array to see how the outputs change.
Resources
For more information on the Formula Node syntax or the functions available, see the LabVIEW Help. Remember you can access the help by using the Context Help window (Ctrl-H). View the
related links below to learn more about the MathScript Node.
Developer Zone: Developing Algorithms Using LabVIEW MathScript: Part 1 The LabVIEW MathScript Node
Developer Zone: Developing Algorithms Using LabVIEW MathScript: Part 2 The MathScript Interactive Window
Video
Exercise
3/3
www.ni.com