Toad for Oracle 12.

1
Installation Guide

 2013 Quest Software, Inc.

ALL RIGHTS RESERVED.
This guide contains proprietary information protected by copyright. The software described in
this guide is furnished under a software license or nondisclosure agreement. This software may be
used or copied only in accordance with the terms of the applicable agreement. No part of this
guide may be reproduced or transmitted in any form or by any means, electronic or mechanical,
including photocopying and recording for any purpose other than the purchasers personal use
without the written permission of Quest Software, Inc.
The information in this document is provided in connection with Quest products. No license,
express or implied, by estoppel or otherwise, to any intellectual property right is granted by this
document or in connection with the sale of Quest products. EXCEPT AS SET FORTH IN
QUEST'S TERMS AND CONDITIONS AS SPECIFIED IN THE LICENSE AGREEMENT FOR
THIS PRODUCT, QUEST ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS
ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. IN NO EVENT SHALL QUEST BE LIABLE FOR ANY DIRECT,
INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES
(INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS
INTERRUPTION OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR
INABILITY TO USE THIS DOCUMENT, EVEN IF QUEST HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. Quest makes no representations or warranties with respect
to the accuracy or completeness of the contents of this document and reserves the right to make
changes to specifications and product descriptions at any time without notice. Quest does not
make any commitment to update the information contained in this document.
If you have any questions regarding your potential use of this material, contact:
Quest Software World Headquarters
LEGAL Dept
5 Polaris Way
Aliso Viejo, CA 92656
email: legal@quest.com
Refer to our Web site (www.quest.com) for regional and international office information.
Trademarks
Quest, Quest Software, the Quest Software logo, Benchmark Factory, Spotlight, Toad, T.O.A.D.,
Toad World, vSpotlight, and vToad are trademarks and registered trademarks of Quest Software,
Inc in the United States of America and other countries. For a complete list of Quest Softwares
trademarks, please see http://www.quest.com/legal/trademark-information.aspx. Other trademarks
and registered trademarks are property of their respective owners.
Toad for Oracle 12.1
Installation Guide
August 29, 2013

Contents
Installation Requirements
System Requirements
Virtualization Support

Required Windows Privileges

Install Toad

4
4
5

6
7

Install or Upgrade Toad

Install Toad on Citrix or Remote Desktop Services Systems

Uninstall Toad

Manually Import Toad Settings

Import Settings

Silently Install Toad

10

About Installing Silently

10

Extract MSI Files

10

Command-Line Parameters (Toad for Oracle)

11

Install Patches Silently

14

Uninstall Toad for Oracle through Command Line

15

Appendix: Contact Quest

16

1
Installation Requirements
System Requirements
Before installing Toad, ensure your system meets the following minimum hardware and software
requirements.
Memory

1 GB RAM required for 32-bit

2 GB RAM required for 64-bit
Note: The memory required may vary based on the following:

Hard Disk
Space

Operating
System

Applications that are running on your system

Size and complexity of the database

Amount of database activity

Number of concurrent users accessing the database

120 MB

Toad for Oracle 32 bit

150 MB

Toad for Oracle 64 bit

Windows Server 2003 (32-bit and 64-bit)

Windows XP (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows Server 2008 (32-bit and 64-bit) - 2 CPU required
Windows Server 2008 R2 (64-bit) - 2 CPU required
Windows 7 (32-bit and 64-bit)
Windows 8 (32-bit and 64-bit)
Windows Server 2012 (64-bit)
Exception:
64-bit Toad's SQL Tracker requires Windows Vista or later.

Database
Client

Oracle Client 9.2.0.8

Oracle Client or Instant Client 10.2.0.3/10.2.0.4
Oracle Client or Instant Client 11.2.0.1/11.2.0.3
Oracle Client or Instant Client 12c
Note: You must use the 32-bit version of Toad with the 32-bit Oracle client,
and the 64-bit version of Toad with the 64-bit Oracle client.

Toad for Oracle Installation Guide

Installation Requirements

Database
Server

Oracle 8.0.6; 8.1.7; 9i; 9i R2; 10g; 10g R2; 11g, 11g R2, 12c.
Toad has been tested on Oracle Exadata 2.0 running Oracle database 11g R2.
Important: It is recommended that your client version be of the same release
(or later) as your database server. This is an Oracle recommendation to
prevent performance issues.

Cloud
Database
Service

Oracle databases running on Amazon EC2

IPv6

Internet Protocol Version 6 (IPv6) is being adopted by the US Federal

Government and industries around the world. In its most basic format, the
new protocol uses 128-bit addresses instead of 32-bit addresses used by the
current IPv4 to route packets over the Internet. Toad for Oracle features such
as FTP access the Internet through third-party vendors such as /nSoftware's
IP*Works that are IPv6 compliant. For access to Web sites by way of the
Toad Online window, Toad simply invokes the user-defined or default Web
browser.

Additional
Software

Microsoft Internet Explorer 6.0 or later (to view the Release Notes)
Adobe Acrobat Reader 7.0 or later (to view the Installation Guide)

Virtualization Support
Before installing Toad, review the following for virtualization support.
Application
Virtualization

Citrix XenApp 5.0 and 6.5 have been tested.

Desktop
Virtualization
(VDI)

Quest vWorkspace 7.0 has been tested.

Server
Virtualization

Oracle VM 3.1 has been tested.

VMware ESX Server 3.5 has been tested.

Note: Toad may work in virtualization environments other than the ones listed.

Toad for Oracle Installation Guide

Installation Requirements

Required Windows Privileges

In order to install and run Toad for Oracle, make a connection, and do basic operations, you must
have the following privileges.
Operating System
Windows XP
Windows Server

Windows Vista
Windows 7

Windows 8
Windows Server 2012

Requirements
l

Read access to the Oracle client folder

Read/write privileges on the Oracle Homes directories

that you use for your connections

Be a Power User or Administrator

Read access to the Oracle client folder

Read/write privileges on the Oracle Homes directories

that you use for your connections

Read access to the Oracle client folder

Read/write privileges on the Oracle Homes directories

that you use for your connections

Note: Other functionality in Toad may require additional privileges.

2
Install Toad
Install or Upgrade Toad
When you install Toad you can also install the additional applications that come with your Toad
Bundle, such as SQL Optimizer (SQL Tuning) or Toad Data Modeler.
If you already have Toad installed and you run the installer for a newer version, Toad
automatically imports your settings files.
l

Install the 32-bit version of Toad if you are using a 32-bit Oracle client.

Install the 64-bit version of Toad if you are using a 64-bit Oracle client.

Caution: If you also have the freeware version of Toad, you should not install the
commercial version over the freeware version. This will adversely affect some functions.
Install the commercial version in a different directory from the freeware version.
Notes:
l

Toad supports importing settings only if the new version is within two releases of the
previous version. If your versions are more than two releases apart, you need to install an
intermediate version to successfully import the files.

If you need to import your Toad settings from another computer, you can manually import
the settings.

To install Toad for Oracle

1. Run the Toad Bundle installation program from the DVD or download file.
2. Complete the wizard.
Note: On the Read-Only Installation page, select whether to install Toad as a typical
install with all features enabled, or whether you want to install as read-only. In read-only
mode, you cannot create, alter, or drop database objects.

Install Toad on Citrix or Remote Desktop

Services Systems
All user files are stored in a user_name directory. When a user opens Toad for the first time, Toad
copies the contents of this folder to the users associated Application Data folder for Toad.
Note: Write access is required to the Oracle directory if any of the users want to edit the
tnsnames.ora file by using the TNSNames Editor.

Toad for Oracle Installation Guide

Install Toad

To install Toad on a Citrix/Remote Desktop Services system

1. Connect to the system as an administrator.
2. Copy Toad to the Citrix/Remote Desktop Services server, if required.
3. Install Toad.
4. Right-click Toad.exe and select Properties. Make sure the Allow non-administrators to
run this program option is selected under Compatibility | User Account Privileges.
5. Repeat steps 2 through 4 for each server in the Citrix/Remote Desktop Services farm.
Note: Although you must install Toad on every server in the farm, you only need to
publish Toad once.

Uninstall Toad
When you use Toad, you create new Toad files such as SQL scripts, data output, or temp files.
When you run uninstall, Toad has no way of knowing what those files are, so it does not remove
files that you have created. You must manually delete them.
To uninstall Toad

From Start | Programs | Quest Software | Uninstall Quest Products, and then follow the
instructions for uninstalling the appropriate program.

Manually Import Toad Settings

Toad automatically imports your previous settings when you upgrade to a new version.
However, there are cases when you may need to manually import your Toad settings.
If you just need to import your connection settings or saved SQL, Toad has features that allow
you to easily import and export them from one copy of Toad to another.
Note: Toad supports importing settings only if the new version is within two releases of the
previous version. If your versions are more than two releases apart, you need to install an
intermediate version to successfully import the files.

Import Settings
If you are installing a new version of Toad on the same computer that has your previous Toad
version already installed, Toad automatically imports your settings. Complete the procedure
below if your old settings are not located on the same computer.

Toad for Oracle Installation Guide

Install Toad

To import settings from another computer

1. On your old computer, open Windows Explorer and locate the Toad settings folder.
Tip: To find the settings folder, select View | Toad Options | General. The folder
location is listed in the Application data directory field.
2. Copy the folder to the new computer, a network it can connect to, or a storage device.
3. Install and open Toad on the new computer.
Note: You need your license key to complete this step.
4. Select Utilities | Copy User Settings in the main Toad toolbar.
5. Click

and navigate to the copied folder.

Note: You can also select Utilities | Copy User Settings to select Create a clean set of
user files from the base installation.

Toad for Oracle Installation Guide

10

Silently Install Toad

Silently Install Toad

About Installing Silently
In order to perform a silent install, you must first extract the MSI file from the Quest Installer.
Once the extraction completes, you can easily install through the silent install batch file, or
install through the command line.
Note: You do not need to install the Quest Installer on any of the computers where you
are silently installing Toad products. The Quest Installer is only used to extract the
required MSI files.
To install silently
1. Extract the MSI from the Quest Installer.
2. Silently install the product. Select one of the following options:
Run silent install
batch file

Run SilentInstall.bat to install the product. This file is located

with the extracted MSI files.
This is the easiest option to install silently. It uses all of the
default options.

Install through
command line

Execute command-line parameters to install.

This option allows you to change the parameters to fit your
environment or standards, such as installing to a different
directory.

Extract MSI Files

nnTo extract MSI files from the Quest Installer
1. Run your Toad bundle from the command prompt, including the correct path to the
directory where it resides and the /extract parameter. Since the executable contains
spaces, remember to include quotation marks. For example:

2. Complete the wizard.Review the following for additional information:

Toad for Oracle Installation Guide

11

Silently Install Toad

Product Selection
Page
Select the
product you
want to extract
Finish Page
"specified
location" link

Description

Verify that all the products you want to extract display in this
list. If a product does not display, you should start over and
select an edition that contains all the files.
Description
Click this link to open the directory where your files have
been extracted. This directory also includes the silent
installation batch file (SilentInstall.bat).
The batch file contains the commands to silently install all the
products that you selected from the relative path. The install
requires the applicable directories from the locations that you
extract to and installs each product to the default directory.

"Readme.txt"
link

Click this link to open the extraction log as well as the

command-line parameters that are needed to perform default
installations of the products. This file also defines the order in
which the products need to be installed to satisfy the
dependencies between the products.
This option allows you to change the parameters to fit your
environment or standards, such as installing to a different
directory.

To silently install Toad for Oracle through the command line

1. Extract the MSI from the Quest Installer.
2. Enter an install command similar to the following:
msiexec /i "<path to msi file\ToadforOracle_
version.msi>"INSTALLDIR="<installation folder>" ADDLOCAL=Client,
Server/q /l*v <path to install log, including file name>

For example:
msiexec /i "C:\Documents and
Settings\Johndoe\desktop\ToadforOracle12.1.exe"
INSTALLDIR="C:\Programs\Quest Software\Toad for Oracle"
ADDLOCAL=Client,Server /q /l*v "C:\install.log"

Command-Line Parameters (Toad for Oracle)

nnYou can use the following parameters to silently install Toad for Oracle:

Toad for Oracle Installation Guide

12

Silently Install Toad

Option

Parameter

Description

/l

Package|ProductCode

Installs or configures the product.

/f

[p|o|e|d|c|a|u|m|s|v]

Repairs the product. This option ignores

any property values entered in the
command-line. The default argument list
for this option is 'omus.' The following
options are available:

Package|ProductCode

pReinstalls only if a file is

missing.

oReinstalls if a file is missing

or an older version is installed.

eReinstalls if a file is missing

or an equal or older version is
installed.

dReinstalls if a file is missing

or a different version is installed.

cReinstalls if a file is missing

or the stored checksum does not
match the calculated value. This
option only repairs files that have
msidbFileAttributesChecksum in
the Attributes column of the File
table.

aForces all files to be

reinstalled.

uRewrites all required, userspecific registry entries.

mRewrites all required,

computer-specific registry entries.

sOverwrites all existing

shortcuts.

vRuns from source and recaches the local package. Do not

use this option for the initial
installation of the product or
feature.

/a

Package

Installs the product on the network.

/x

Package/ProductCode

Uninstalls the product.

Toad for Oracle Installation Guide

13

Silently Install Toad

Option

Parameter

Description

/l

[i|w|e|a|r|u|c|m|o|p|v|x|+|!|*]

Writes logging information to a logfile

in the specified path. The path to the
logfile location must already exist. The
installer does not create the directory
structure for the logfile. Flags indicate
which information to log. If no flags are
set, the default is 'iwearmo.' The
following options are available:

Logfile

/q

n|b|r|f

iStatus messages.

wNonfatal warnings.

eAll error messages.

aStart up of actions.

rAction-specific records.

uUser requests.

cInitial UI parameters.

mOut-of-memory or fatal exit

information.

oOut-of-disk-space messages.

pTerminal properties.

vVerbose output.

xExtra debugging information.

Only available on Windows
Server 2003.

+Append to existing file.

!Flush each line to the log.

"*"Log all information except

for the v and x options. To
include the v and x options, enter
"/l*vx".

Sets the user interface level. Review the

following options:
l

q, qnNo UI

qbBasic UI. Use qb! to hide

the Cancel button.

Toad for Oracle Installation Guide

14

Silently Install Toad

Option

Parameter

Description
l

qrReduced UI with no modal

dialog box displayed at the end
of the installation.

qfFull UI and any authored

FatalError, UserExit, or Exit
modal dialog boxes at the end.

qn+No UI except for a modal

dialog box displayed at the end.

qb+Basic UI with a modal

dialog box displayed at the end.
The modal box does not display
if you cancel the installation. Use
qb+! or qb!+ to hide the Cancel
button.

qb- Basic UI with no modal

dialog boxes. Note that /qb+- is
not a supported UI level. Use
qb-! or qb!- to hide the Cancel
button.

Note: The ! option is available with

Windows Installer 2.0 and works only
with basic UI. It is not valid with the
full UI.
RESTRICTIONS

Prevents users from saving their

connection password by disabling the
Save password field in the Database
Login window. For example:
RESTRICTIONS=p

Prevents users from accessing the

Internet via Toad by disabling all
Internet access in Toad. This can be
combined with the 'p' parameter; for
example: RESTRICTIONS=p,i

Install Patches Silently

If you already have Toad installed and want to upgrade silently, you must include
REINSTALLMODE=vo REINSTALL=ALL in the command. If these parameters are not included, the
MSI registers that Toad is already installed and does not upgrade it.

Toad for Oracle Installation Guide

15

Silently Install Toad

For example, if you are currently in the directory where the MSI resides, entering the following
command installs to the standard location:
msiexec.exe /i <path to msi file\ToadforOracle<version>SetupFull.msi>
REINSTALLMODE=vo REINSTALL=ALL

You can also set additional parameters or run the MSI from a location other than the active
directory. For example:
msiexec /i "C:\Documents and Settings\johndoe\desktop\
ToadforOracleSetupFull.msi REINSTALLMODE=vo REINSTALL=ALL
INSTALLDIR="C:\Programs\Quest Software\Toad for Oracle\" /q /l*v
"C:\install.log"

Uninstall Toad for Oracle through Command Line

To silently uninstall Toad through the command line

Enter a command similar to the following:

msiexec /x "<path to msi file\ToadforOracle_version.SetupFull.msi>" /q

Appendix: Contact Quest

Contact Quest Support
Quest Support is available to customers who have a trial version of a Quest product or who have
purchased a Quest product and have a valid maintenance contract. Quest Support provides
unlimited 24x7 access to our Support Portal at www.quest.com/support. From our Support Portal,
you can do the following:
l

Retrieve thousands of solutions from our Knowledge Base

Download the latest releases and service packs

Create, update and review Support cases

View the Global Support Guide for a detailed explanation of support programs, online services,
contact information, policies and procedures.
The guide is available at www.quest.com/support.
Contact Quest Software
Email

info@quest.com
Quest Software, Inc.
World Headquarters

Mail

5 Polaris Way
Aliso Viejo, CA 92656
USA

Web site

www.quest.com

See our web site for regional and international office information.
About Quest Software, Inc
Quest Software simplifies and reduces the cost of managing IT for more than 100,000 customers
worldwide. Our innovative solutions make solving the toughest IT management problems easier,
enabling customers to save time and money across physical, virtual and cloud environments. For
more information about Quest go to www.quest.com.
Established in 1987, Quest Software (Nasdaq: QSFT) provides simple and innovative IT
management solutions that enable more than 100,000 global customers to save time and money
across physical and virtual environments. Quest products solve complex IT challenges ranging
from database management, data protection, identity and access management, monitoring, user
workspace management to Windows management. For more information, visit www.quest.com.