Finite Element Method

UNIT III
FINITE ELEMENT METHOD
1. What is meant by finite element method?

2. List out the advantages of finite element method
3. List out the disadvantages of finite element method
4. Mention the various coordinates in finite element method
5. What is meant by discretization?
6. Define displacement function
7. What are the different types of element used in finite element method?
8. What are1-D Elements? Give example
9. What are 2-D Elements? Give examples
10. What are 3-D Elements give Examples
11. Define shape function
12. Define aspect ratio in finite element method
13. What are the factors governing the selection of finite elements?
14. What are the basic steps in FEM?
15. What is meant by plane strain condition?
1.What is meant by Finite element method?
Finite element method (FEM) is a numerical technique for solving boundary value
problems in which a large domain is divided into smaller pieces or elements. The solution
is determined by asuuming certian ploynomials. The small pieces are called finite
element and the polynomials are called shape functions.
2. List out the advantages of FEM.
Since the properties of each element are evaluated separately different material
properties can be incorporated for each element.
There is no restriction in the shape of the medium.
Any type of boundary condition can be adopted.
3. List out the disadvantages of FEM.
The computational cost is high.
The solution is approximate and several checks are required.
4. Mention the various coordinates in FEM.
Local or element coordinates
Natural coodinates
Simple natural coodinates
Area coordiantes or Triangular coordiantes
Generalised coordinates
5. What are the basic steps in FEM?
Discretization of the structure
Selection of suitable displacement fuction
Finding the element properties
Assembling the element properties

Applying the boundary conditions
Solving the system of equations
Computing additional results
6. What is meant by discretization?

Discretization is the process of subdividing the given body into a number of elements
which results in a system of equivalent finite elements.
7. What are the factors governing the selection of finite elements?
The geometry of the body
The number of independent space coordinates
The nature of stress variation expected
8. Define dispalcement function.
Displcement function is defined as simple functions which are assumed to approximate the
displacements for each element. They may assumed in the form of poynomials, or
trignometrical functions.
9. What are differnt types of elements used in FEM?

The various elements used in FEM are classified as:
One dimensional elements (1D elements)
Two dimensional elements (2D elements)
Three dimensional elements (3D elements)
10. What are 1-D elements? Give examples.
Elements having a minimum of two nodes are called 1D elements. Beams are usually
approximated with 1D elements. These may be straight or curved. There can be additional
nodes within the element.
Basic 1-D element
1-D element with 3 nodes
Curved element with 3 nodes

A plane wall, plate, diaphragm, slab, shell etc. can be approximated as an assemblage of
2-D elements. Most commonly used elements are triangular, rectangular and quadrilateral
elements.
Triangular elements
Curved triangular
element
Rectangular and Quadrilateral elements

3-D elements are used for modeling solid bodies and the various 3-D elements are
tetrahedron, hexahedron, and curved rectangular solid.
13. Define Shape function.

Shape function is also called an approximate function or an interpolation function whose
value is equal to unity at the node considered and zeros at all other nodes. Shape function
is represented by Ni where i = node no.
14. Define aspect ratio.
Element aspect ratio is defined as the ratio of the largest dimension of the element to its
smallest dimension.
15. What is meant by plane strain condition?

Plane strain is a state of strain in which normal strain and shear strain directed
perpendicular to the plane of body is assumed to be zero.
1.List out the softwares which are used in finite element analysis
NX Nastran is a finite element solver that analyzes stress, vibration, structural failure/durability,
heat transfer, noise/acoustics and flutter/aeroelasticity.
Femap is a CAD-independent, Windows-native pre- and post-processor for advanced
engineering FEA. It provides engineers and analysts with an FEA modeling solution to handle
even the most complex tasks easily, accurately and affordably.
Solid Edge Simulation is a built-in FEA tool for design engineers to validate part and assembly
designs digitally within the Solid Edge environment. Based on proven Femap finite element
modeling technology, Solid Edge Simulation significantly reduces the need for physical
prototypes, thereby reducing material and testing costs, while saving design time.
The following software components are used by FEA software developers as the foundation for
their applications:
Parasolid is 3D geometric modeling component software, enabling users of Parasolid-based
products to model complex parts and assemblies. It is used as the geometry engine in hundreds
of different CAD, CAM and CAE applications.

Finite Element Method

Uploaded by

Finite Element Method

Uploaded by

UNIT III

FINITE ELEMENT METHOD

1. What is meant by finite element method?

Assembling the element properties

6. What is meant by discretization?

9. What are differnt types of elements used in FEM?

Basic 1-D element

1-D element with 3 nodes

Curved element with 3 nodes

Rectangular and Quadrilateral elements

13. Define Shape function.

15. What is meant by plane strain condition?

You might also like