Architecture Course

Preamble / Objective
The Bachelor of Architecture degree programme prepares students for professional

practice in the field of Architecture. Being an undergraduate programme, it has bright
scope, providing exposure to a variety of interests in this field and assisting students to
discover their own directions for future development.
There is increasing recognition today of Architecture as an intellectual discipline, both as
art& science and as a profession. Through architectural design, Architects make vital
contribution in defining and shaping our environment and future of society with the use
of appropriate technologies for a diverse range of situations, both in the rural and urban
contexts.
Considering the diverse Indian complexities in terms of social, cultural, geographical,
climatic, economic and technical aspects, which are unique and typical of every region in
our country, the task for profession of Architecture becomes all the more challenging.
Making provision of most optimum and sustainable solutions/ options ,to address the
basic needs of living, working and care of body and soul(three basic human functions) of
even the poorest of the poor, to lead a productive and dignified life, demand appropriate
skills, understanding, knowledge and a deep commitment to professed ideals. Addressing
Architectural Design as a comprehensive creative process, this UG programme leading to
B. Architecture, is based on the following broad objectives;
a)
To stimulate sensitivity and unveil creative talents.
b)
To reinforce intellectual capabilities and develop proficiency in professional skills

to enable graduates to competently pursue alternative careers, within the broad
spectrum of architecture.
To provide opportunities to students to try out the role they will eventually play as
responsible members of the society, under supervision and interactive guidance.
c)
Keeping in view the above objectives, this programme aims at attaining a high level of
excellence in Architectural Design with sound knowledge of Construction. To this end,
the Architectural Design and Building Construction & Materials is seen as the core of
the programme with supportive inputs from courses in other streams like Professional,
Technological and Humanities to built upon a strong foundation of enabling skills in
communications , understanding and analysis.. The emphasis is on the development of
faculties of discernment and decision-making with the aid of both objective information
and subjective attitudes, based on reason and logic.
Architectural Design, being the core discipline of the course has been dealt in detail and
major guidelines have been framed regarding the specific content of these courses.
Design tests and group design exercise have been introduced so as to aim for both
individual and collective excellence in equal measure. Special emphasis will be laid on
the organisation of seminars in both compulsory and elective courses in all streams so
that students get opportunities in public speaking and become more articulate in direct
presentation of their ideas.
Given the complexities of present-day Design projects, the Architect's role is not only
that of a team leader but also that of a co-ordinator. He needs to possess a sound
knowledge of entire spectrum of technologies which go in the making of state of art built
environment, to be able to draw up an integrated framework for activities of the other
members of the team, to direct them and to assume overall responsibility for the
collective effort. This is manifest in the course in the Technological and professional
streams.
CURRICULUM
The curriculum has been structured as five -year, two-stage programme as per the
Minimum Standards of Architectural Education Regulations, 1983 issued by the Council
of Architecture under the Indian Architects Act, 1972. The First Stage would consist of
6 semesters (Three years) of full time study. The Second Stage will consist of full-time
study for last four semesters (two year).
At the successful completion of the first stage, student shall be eligible for the award of
Bachelor of Building Sciences, subject to the condition that student scores 50% marks in
the aggregate.
B. Arch Degree shall, however, be awarded after completing the entire course spread
over ten semesters based on the rules and regulations defined by the university from time
to time ,subject to the condition that student scores 50% marks in the aggregate.
The detailed contents of the course are defined below.
FIRST SEMESTER B.ARCHITECTURE

No of
lectures/studio
Seminar/
Tutorial
Practical work
Core subject
sttsts
Stream
TEACHING SCHEDULE & SCHEME OF EXAMINATION-2012
Total
BACH-101
Architectural Design And Theory-I
100
100
200
06
BACH-102
BACH-105
Building Construction & Material-1

Architectural Drawing-1
Architectural Graphics-1
Structure System-1
4
5
4
2
2
-
6
5
4
2
70
60
50
50
70
60
50
-
140
120
100
50
BACH-106
Workshop-1
40
40
HVPE-101
Human Value & Professional Ethics

Communicative English
Communicative Skills laboratory
3
3
3
3
2
40
40
30
60
60
20
100
100
50
04
04
04
No
university
exam
No
university
exam
03
03
No
university
exam
26
34
480
420
900
Subject
code
BACH-103
Allied subjects
BACH-104
Total
Notes-
BTHU-101
BTHU-102
Subject
Int.
Marks
Ext.
Marks
Remarks/
Total Total Duration of
Marks Credit Exams in
Hour
Second Semester
B. Architecture- Scheme 2012
Teaching Schedule and Scheme of Examination

Stream
Subject
code
Subject
No. Of
lectures
Seminar/
tutorial
Studio/
Field
work
total
Internal
marks
External
marks
Total
Remarks duration of
exam in hour
Core
subjects
BACH-201
Architectural design -II
100
100
200
BACH-202
Building Construction and

Materials-II
Architectural Drawing II
Architectural Graphics-II
Theory of Design-I
History of Architecture I
Theory of Structures-I
Workshop II
Environment Science
General Fitness
70
70
140
06+ Evaluation to be
done through university
viva- voce by external
examiner at college level
04
1
1
2
2
2
1
2
1
1
4
3
1
1
5
4
2
3
3
2
3
18
35
50
50
40
40
40
60
40
100
590
50
50
60
60
60
60
510
100
100
100
100
100
60
100
100
1100
Allied/
BACH-203
Supporting BACH-204
Subjects
BACH-205
BACH-206
BACH-207
BACH-208
EVSC-101
TOTAL
15
2
Educational tour Approximately of One week duration during the 2nd semester
Total Marks of First Year=
900+1100 = 2000
04
04
03
03
03
Internal Viva-Voce
03
No Exam
III SEMESTER B.ARCHITECTURE

TEACHING SCHEDULE AND SCHEME OF EXAMINATION -2012
Stream
Core Subjects
Allied /
Supporting
Subjects
TOTAL
Code No.
Subject
Lectur
es
Seminar
/
Tutorial
s
Studio
/Field
work
Total
Max. Marks
Int.
marks
Ext.
marks
Total
Duration of Univ. Exam

Viva - Voce/ Practical(Hrs)
BACH 301
ARCHITECTURAL DESIGN - III
100
100
200
06+University Viva voce.

The External marks should
be awarded through
external jury viva voce
BACH 302
BUILDING CONSTRUCTION
&MATERIALS - III
ARCHITECTURAL DRAWING
III
75
75
150
04
50
50
100
04
BACH 304
CLIMATE & ARCHITECTURE - I
40
60
100
03
BACH 305
COMPUTER APPLICATIONS - I
50
50
100
BACH 306
STRUCTURE SYSTEMS II
50
50
BACH 307
STRUCTURE DESIGN - I
40
60
100
03
BACH 308
SURVEYING AND LEVELLING - I
03
BACH 303
40
60
100
12
17
33
445
455
900
External Viva Voce

Internal Viva Voce
IV SEMESTER B.ARCHITECTURE
TEACHING SCHEDULE AND SCHEME OF EXAMINATION - 2012
Stream
Core
Subjects
Allied /
Supporting
Subjects
Code No.
BACH 401
ARCHITECTURAL DESIGN IV
Semi
nars
/
Tuto
rials
-
BACH 402
BACH 403
BUILDING CONSTRUCTION
&MATERIALS IV
ARCHITECTURAL GRAPHICS III
50
50
100
03
BACH 404
HISTORY OF ARCHITECTURE II
40
60
100
03
BACH 405
THEORY OF DESIGN-II
40
60
100
03
BACH 406
CLIMATE AND SUSTANIABILTY

I
COMPUTER APPLICATIONS -II
BUILDING SERVICES-I
STRUCTURE DESIGN III
40
60
100
03
1
2
1
1
-
2
2
3
3
3
50
40
40
50
60
60
100
100
100
External Viva Voce

03
03
100
100
As per PTU
guidelines
575
575
1150
BACH 407
BACH 408
BACH 409
Subject
Lect
ures
Studio
/Field
work
Total
14
* Educational Tour
Total
Duration (Hrs) Univ.

Exam Viva - Voce/
Practical
Int.
marks
Ext.
marks
100
100
200
75
75
150
06+University Viva
voce.
The External marks
should be awarded
through external jury
viva voce
04
GENERAL FITNESS
TOTAL
Max. Marks
15
33
One Week Duration During/After Second Year
Total
Total
Remarks
Duration of Exam in Hour
Studio/field
work
Subject
Semi/ Tutorials
Total
Subject
code
No of lectures
Allied/supporting subjects
Core subjects
Stream
V SEMESTER B.ARCHITECTURE
TEACHING SCHEDULE & SCHEME OF EXAMINATION - 2012
BACH 501
Architectural Design-V
100
100
200
BACH 502
75
75
150
BACH 503
Building Construction &

Materials-V
History of Architecture-III
12+University Viva voce.

The External marks should
be awarded through
external jury viva voce
04
40
60
100
03
BACH-504
Theory of Design-III
40
60
100
03
BACH 505
Landscape Architecture-I
40
60
100
03
BACH 506
Structure System-II
50
50
Viva Voce
BACH 507
Building Services-II
40
60
100
03
BACH 508
Structure Design-IV
40
60
100
03
14
30
425
475
900
Int
Ext
Marks Marks
VI SEMESTER B.ARCHITECTURE
Seminars/
Tutorials
BACH-601
Architectural Design-VI
BACH-602
Building Construction &

Materials VI
History of Architecture-IV
Interior Design-I
Building Services-III
Estimating , costing and
specifications-I
Architectural Legislation-I
Structure Design Project
General Fitness-III
2
2
2
2
Core subjects
Allied/supporti
ng subjects
Total
BACH-603
BACH-604
BACH-605
BACH-606
BACH-607
BACH-608
Studio/ field
work
Subject8
Stream
Subject
code
No of
lectures
TEACHING SCHEDULE & SCHEME OF EXAMINATION -2012

Total
Total Remarks
Duration of Exam in Hours
Int
Mark
s
Ext
Marks
100
100
200
75
75
150
1
1
1
1
-
3
3
3
3
40
40
40
40
60
60
60
60
100
100
100
100
3
-
3
4
40
50
100
60
50
-
100
100
100
14
10
31
525
525
1050
12 + External Viva voce.

(The External marks should
be awarded through external
jury viva voce)
04
03
03
03
03
03
External Viva voce
As per PTU guidelines.
VII SEMESTER B.ARCHITECTURE

TEACHING SCHEDULE AND SCHEME OF EXAMINATION - 2012
Code No.
BACH-701
Subject
Practical
Training
Programme
Duration of
Training
One Full Semester
Max. Marks
Int.
Ext.
Marks
Marks
350
150
Total Marks
Exam
Uni. Viva-Voce
500
No
Exam
Yes
VIII SEMESTER B.ARCHITECTURE

Stream
Core
Subjects
Allied /
Supporting
Subjects
TOTAL
Code
No.
Subject
Lectu
res
Seminars
/
Tutorials
Studio
/Field
work
Total
Max. Marks
Int.
marks
Ext.
marks
Total
marks
Duration of Univ. Exam Viva Voce/ Practical(Hrs)
BACH ARCHITECTU
- 801 RAL DESIGN
VII
10
12
125
125
250
No University ExamThe External marks shall be awarded

through External jury viva voce
BACH BUILDING
802
CONSTRUCTI
ON
&MATERIALS
- VII
BACH URBAN
803
DESIGN - I
BACH HOUSING I
804
BACH HIGH RISE
805
BUILDINGS
I
ELECTIVE I
75
75
150
04
40
60
100
03
40
60
100
03
40
60
100
03
40
60
100
03
17
32
360
440
800
12
ELECTIVE-I
(Choose any One from BACH 806 TO BACH 808 )
BACH 806 (EL) - ARCHITERCTURAL CONSERVATION-I
BACH 807 (EL) SUSTAINABLE ARCHITECTURE-I
BACH 808 (EL) - BUILDING MAINTENANCE - I
IX SEMESTER B.ARCHITECTURE
Stream
Core
Subjects
BACH 901
Allied /
Supporting
Subjects
TOTAL
Code No.
Subject
ARCHITECT
URAL
DESIGN
VIII
BACH 902 BUILDING
CONSTRUCTI
ON
&MATERIAL
S - VIII
BACH 903 TOWN
PLANNING
I
BACH 904 BUILDING
ECONOMICS
I
ELECTIVE
II (One out of
BACH 905 &
BACH 906)
ELECTIVE
III(One out of
BACH 907 &
BACH 908)
Lecture
s
Seminar Studio
s/
/Field
Tutorials work
Total
Max. Marks
Total
marks
Duration of Univ. Exam Viva - Voce/

Practical(Hrs)
10
12
Int.
mark
s
125
75
75
150
04
40
60
100
03
40
60
100
03
40
60
100
03
40
60
100
03
12
14
30
360
440
800
ELECTIVE-II (anyone of the following)

BACH 905 (EL) HILL ARCHITECTURE-I
BACH 906 (EL) - VERNACULAR ARCHITECTURE -I
ELECTIVE- III (anyone of the following)
BACH 907 (EL) TRAFFIC AND TRANSPORTION-I
BACH 908 (EL) - LANDSCAPE ARCHITECTURE -II
Ext.
mark
s
125
250
No University ExamThe External marks shall be awarded

through External jury viva voce
X SEMESTER B.ARCHITECTURE
Stream
Core
Subjects
Allied /
Supporting
Subjects
TOTAL
Code
No.
Subject
Lectures
Seminars/
Tutorials
Studio
/Field work
Total
Max. Marks
Int.
marks
Ext.
marks
Total
marks
Duration of Univ. Exam

Viva - Voce/ Practical(Hrs)
BACH
- 1001
ARCHITECTURAL
DESIGN IX
(THESIS PROJECT)
24
24
300
250
550
No University ExamThe External marks shall

be awarded through
External jury viva voce
BACH
1002
BACH
1003
BACH
1004
CONSTRUCTION
MANAGEMENT I
PROFESSIONAL
PRACTICE I
DISASTER
MANAGEMENT I
40
60
100
03
40
60
100
03
40
60
100
03
8
1
24
33
420
430
850
Note :- STUDENT MUST SCORE QUALIFYING MARKS IN THE SUBJECT ARCHITECTURAL DESIGN IX (THESIS PROJECT )
FOR BEING ELIGIBLE TO OBTAIN A DEGREE IN B.ARCH.
B.ARCHITECTURE-IST SEMESTER-2012
ARCHITECTURAL DESIGN AND THEORY- I
BACH 101
University Exam Marks - 100
Sessional Marks
- 100
Duration of Exam
- 06 hrs. (Evaluation to be done through viva- voce by external examiner)
No. of contact hrs.
- 07per week
INTENT
To introduce Architectural Design to students through Basic Design.
The main aim of the course is to get the students interested in and to familiarize them with the art of design and architecture. To enhance and
promote visualization, expressional skills and sensitivity to surrounding environment.
Making student learn the art of collecting data and to carry out analysis for the process of evolving design and individuality of approach.
CONTENTS
Two & Three dimensional Design Exercises involving real and imaginary objects, drawing compositions and models made of matchsticks,
cardboard, wires, wood pieces etc. to form an appropriate base for subsequent Architectural design and theory.
UNIT-I
PART A( Theory)
1. Introduction to Basic Design
2. Objectives of Design
3. Basic Elements of Design
4. Principles of Design
PART B
1. Scale and proportion in Architecture.
2. Anthropometrics dimensions including physically challenged persons
Max. Marks -40
UNIT-II (Application and Experience)

Max. Marks-60
1
2D compositions with basic geometric shapes, color, texture and pattern.
2 Door elevation
3 Carpet design, Backdrop of stage
4 Mural with geometrical shape
5 Floor tile design & paving patterns.
6 Sky line of city/village
7 Experience in 3D Design, compositions with simple forms like cube, cuboids, cylinder, cone, prism etc.
Compositions with 3-D Objects. (Black & white and colours.)
GUIDELINES
1. Four questions are to be set from unit-I, two from part A and two from part B and students will be required to attempt one question
from each part.
2. Two questions are to be set from unit-II and students will be required to attempt only one question.
3. Stress should be given to practically understand the principles of design learnt in theory (Unit-I).
NOTE
Evaluation is to be done through viva voce by external examiner appointed by the university at college and answer sheets should be
retained at college level.
REFERENCES:
1. ................ V.S.Pramar, Design Fundamentals in Architecture, Somaiya Publications Private Ltd., New Delhi, 1973.
2. ................ Francis D.K.Ching, Architecture Form, Space and Order, Van Nostrand Reinhold Company, New York, 1979.
3. ................ Structure in Nature- Strategy for Design Peter Pearce
4. ................ Patterns in Nature- Peter Streens
BUILDING CONSTRUCTION & MATERIALS- I
BACH 102
University Exam Marks
Sessional Marks
Duration of Exam.
No. of contact hrs.
- 70
- 70
- 04 Hrs
- 06 per week
INTENT
The overall intent is to study various construction methods in coordination with the Building Materials and science related to them.
CONTENTS
Subject consist of two unitsUNIT I Building Materials
UNIT - II Construction
UNIT I BUILDING MATERIALS

Elementary Building Materials
1.
2.
3.
4.
Max. Mks.- 25
The study of constituents, properties, types, available market forms and uses of Bricks, Stones, Cement, Lime and Sand.
The study of constituents, properties and uses of Mortar, Lime Mortar, Cement Mortar, Surkhi and Mud Mortar.
Surface Finishes - Plastering and Pointing.
Teaching Methodology: Site visit to Brick Kiln /Construction site. Market Survey for above said materials with respect to their
availability, trade names, market rates etc. Site report should be evaluated and shall form part of the sessional work.
UNIT II CONSTRUCTION
Brick Masonry
Max . Mks.- 45
1. Terminology used in Brick masonry,

2. Tools used in Brick masonry.
3. Types of Bats and closers in Brick masonry.
4. Bonds in Brick work. L-junctions, T-Junctions, cross junction in brick masonry (4-1/2", 9", 13-1/2" thick brick walls)
5. Attached & detached Piers in Brick.
6. Arches-Flat, Segmental and Semicircular Arch in Brick masonry.
7. Lintels, sills, coping and threshold details.
8. Design of simple Brick jalli.
9 Stone masonry of various types
GUIDELINES
Three questions are to be set from unit I, and Four questions are to be set from unit-II.
Students will be required to attempt two questions from unit-I and two questions from unit-II.
Question paper is to be set covering the entire syllabus.
RECOMMENDED BOOKS:
Building construction
Construction of buildings.
Construction technology
Building Construction illustrated
Elementary building Construction
Engineering materials
National Building Code
W.B. Mckay vol. 1 to 4

R.Barry vol. 1 to 4
Chudley vol. 1 to 4
Ching Francis D.K.
Michell
Rangwala
5. ................
ARCHITECTURAL DRAWING- I
BACH 103
University Exam Marks - 60
Sessional Marks
- 60
Duration of Exam
- 4hrs.
No. of contact hrs.
- 05 per week
INTENT
To familiarize the students with basic knowledge of good drafting and lettering techniques and
architectural drawing i.e. orthographic projections of simple geometrical forms.
CONTENTS
UNIT- I
Max. Marks-15
Drafting Technique&, Principles of Drafting,
Dimensioning and types ofLines
Lettering (free hand & block lettering)
Scales & its Use in the Architectural Drawing.
UNIT- II
PART A
Max. Marks-25
Orthographic Projections of the Point, Lines, Planes and Solid in various positions in the First Quadrant.
PART B
Section of Solids e.g. Cube, Cuboid, Cone, Cylinder, Pyramid, Prism etc.
UNIT- III
Max. Marks-20
Development of Surfaces: Simple Geometrical Solids e.g. Cube, Cuboid, Cone, Cylinder, Pyramid, Prism etc.
Interpenetration of Solids.
GUIDELINES
Two questions are to be set from unit I and unit III each . Students will be required to to attempt one questions from each unit.
Four questions are to be set from unit II, two question from part A and two from part B. Students will be required to attempt one
question from each part.
REFERENCES:
1. ................ Engineering Drawing N.D. Bhatt
2. ................ Engineering Graphics K.R. Mohan
3. ................ Engineering Drawing R.K. Dhawan
ARCHITECTURAL GRAPHICS- I
BACH 104
University Exam Marks Sessional Marks
Duration of Exam
No. of contact hrs
.-
50
50
04 hrs.
04 per week
INTENT
To learn the utility and art of using the potential of Pencil as a powerful tool of Graphic Communication.
To understand the fundamentals, use, role and importance of Colours in Graphics.
CONTENTS
UNIT- I
Max. Marks -30
Pencil as an effective presentation tool.
Free hand line work with different strokes/grades in pencil.
Effect of light and shade on simple geometrical solids.
Textures of different building materials in pencil through shading.
Freehand sketching of human figures, trees and vehicles on an appropriate scale.
Outdoor sketching of simple building forms.
Sketches of scenes and activities from memory involving public spaces, markets, festivals, recreational spaces etc.
UNIT-II
Poster Colours and its use
Colour Wheel showing Primary, Secondary and Tertiary colours.
Colour Schemes & Charts showing Tints and Shades of various colours.
Effect of colours in relief compositions.
Max. Marks-20
GUIDELINES
A total of four questions are to be set.
Three questions will be from Unit- I, out of which students will be required to attempt two questions.
One compulsory question is to be set from Unit- II.
REFERENCES:
1. ................ Graphic Illustrations in Black and White by Jaccueline, Design Press, New York, 1991
2. ................ Architectural Rendering, Crowe Philip- Rofovision S.A.Switzerland, 1991
3. ................ Rendering with Pen & Ink, Robert W. Gill, Thames & Hudson London, 2008
STRUCTURE SYSTEM- I
BACH 105
University Exam Marks 00( No University Exam)
Sessional Marks
- 50
No. of contact hrs.
- 02 per week
INTENT
To inculcate in the student an awareness of basic structural principles used in various building systems.
CONTENTS
UNIT- I
CELLULAR SYSTEM
1.
2.
3.
4.
Cell as a natural unit of space.

Cell transformation.
Polygonal Cellular Systems leading to evolution of Geodesic Domes
Applications of Cellular System in Building
UNIT-II
BULK ACTIVE STRUCTURE SYSTEM
Structure acting mainly through material bulk and continuity i.e.. Bulk active structure system / structure systems in bending involving:
1.
2.
3.
4.
Slabs (One way & Two way)

Beams (Simply supported, Cantilever, Continuous, Vierendale Girders)
Grid (Skew & Square Grid)
Columns
GUIDELINES
This course is to be taught as an introduction with special reference to structure in nature viz. Trees, Human body and other examples in
which unusual rock formations are created by the forces of nature like wind and water.
The teaching in this subject must bring out:
1. The predominant pictorial nature of the Architects language.

2. The physical - mechanical essence of the subject matter.
3. The orientation of all Architectural efforts and its relation to form and space.
NOTE
More emphasis while teaching shall be laid on learning by doing by students involving making of 3-D models (to give the student different
spatial experience and make them understand the basics/principles involved).
REFERENCES:
1. Order in Space By Keith Critchlow
2. Three Dimensional Design By Richard K.Thomas
WORKSHOP- I
BACH 106
University Exam Marks 00 (No Exam)
Sessional Marks
- 40
No. of contact hrs.
- 02 per week
INTENT
To acquaint the students with the basic skills of Carpentry and Brick Masonry.
CONTENTS
TOPICS
Carpentry Introduction to the use of different types of Tools used in Carpentry.
Joints Different types of Joints, Joinery details commonly used in Timber construction and interiors.
Model-- Preparation of wooden base for model making.
Form Work - Use of Clay, Brick and Soap for creating three dimensional forms in space.
Brick Masonry Small brick masonry construction models for understanding of various bonds, jallies etc.
Block Making- Three dimensional building blocks and forms using different materials.
GUIDELINES
Continuous Evaluation shall be made of students work based on various models, assignments and market surveys.
B.ARCHITECTURE- II SEM.
ARCHITECTURAL DESIGN-II
(BACH--201)
Uni.Exam.Marks - 100
Sessional Marks - 100
Duration of Exam. 06 hours (Evaluation to be done through university viva- voce by external
examiner)
INTENT
To appreciate the constraints in the Architectural design of a small building with reference to
function, form and structures.
CONTENTs
Importance of physical factors in Architectural design e.g. orientation, ventilation, adequate
protection from rain, dust, insects etc. and human dimensions in various postures (in applied
form),their relation to everyday utilities like the table, chair, bed, sink etc. Understanding
measured drawing of an existing small unit.
TOPICS
Introduction of physical factors / geographical aspects for basic design.
The exercise shall be followed by design problem based on the basic climatic aspects
and to understand the function of a single unit.
Design of small buildings involving functional, structure system & constructional
methods e.g. Milk booths, Kiosks, Bus stop, Cafes, Drinking water fountains, Canopy,
Cycle stand, Security Check post, Installations for Circulation etc.
Minimum 2 -3 exercise to be taken.
All buildings should have accessibility to the physically challenged persons.
Design Teaching Methodology:
The Basic methodology of teaching should be based on
Library study to understand the basic functions of building and anthropometric.
Case Study to understand the similar buildings in similar context.
The emphasis of design should be on the space organisation and built form.
GUIDELINES FOR PAPER SETTER
1.
One compulsory question is to be set from the entire syllabus
2.
The topic of the project is to be displayed on College Notice Board fifteen days in
advance.
NOTE : Evaluation is to be done through viva voce by external examiner appointed by the
university at college. Answer sheets after the university exam shall be retained at college
level for the viva- voce.
REFERENCES:
1. ................ V.S.Pramar, Design Fundamentals in Architecture, Somaiya Publications Private
Ltd., New Delhi, 1973.
2. ................ Francis D.K.Ching, Architecture Form, Space and Order, Van Nostrand Reinhold
Company, New York,
BUILDING CONSTRUCTION & MATERIALS-II
(BACH--202)
Uni.Exam.Marks - 70
Duration of Exam. - 04 hours
INTENT
To study various construction methods in co-ordination with the building materials and science
related to them.
CONTENTs
The subject consists of two unitsUNIT - I Building Materials with emphasis on learning of materials.
UNIT - II Building Construction with emphasis on construction drawings by pencil only.
UNIT-I BUILDING MATERIALS
Max. Marks.-20
(a) Timber: Types, Seasoning , Defects and Decay and Uses of Timber
(b) Iron and Steel Study of composition of Cast iron, Steel and Wrought Iron with
properties and
uses in buildings
(c) Water proofing:- Water proofing materials(liquid, semi liquid and solid) Composition,
Properties , Applications.
(d) Surface finishes:-White wash, Distemper, Paints and Varnishes- Types, Applications,
Suitability, Advantages and Disadvantages.
UNIT-II BUILDING CONSTRUCTION
Max. Marks. 50
(a)Foundation and Damp proof course
Types of Foundations and its important details.
Application of Damp proof course, its material and laying. Detailing of Horizontal and
Vertical D.P.C.
(b) Doors
Introduction to Joints in Carpentry.( Different Types of Joints, Joinery details)
Types of Doors
Design and construction details of Framed ,Ledged, Braced & Battened Door, Flush
Door, Wire mesh Door, Panelled Door
(c) Windows
Types of Windows in timber, Design and Construction details of Casement, Bay,
Clearstory, Corner window etc.
(d)Construction of roof
R.C.C, R.B.C. Roof & Jack Arch Roof, Tiled and Battened Roof, I- Channel Roof.
Concepts of water proofing & Thermal Insulation of Roofs.
(e) Section through Single Story of load bearing structure and Frame structure.

1.
2.
3.
4.
One compulsory question containing 5 question of 2 marks (10 Marks) , each requiring
short answers, are to be set from the entire syllabus (4 Marks and 6 marks from unit I
and Unit II respectively)
Three questions are to be set from UNIT-I and students are required to attempt any two
questions.
Three questions are to be set from UNIT-II and students are required to attempt two
questions.
Questions paper is to be set covering entire syllabus by making parts and mixing the
topics.
Note
Emphasis should be laid on making students understand complete construction
details of single story structure.
References:
Mckay W.B.; BuildingCconstruction . Vol. 1 to 4
Barry R.; Construction of Buildings.- Vol. 1 to 4
Chudley; Construction Technology- Vol. 1 to 4
Ching Francis D.K; Building Construction illustrated
Michell ; Elementary Building ConstructionRangwala ; Engineering Materials
National Building Code- 2005
ARCHITECTURAL DRAWING-II
(BACH--203)
Uni.Exam.Marks - 50
INTENT:-To familiarize the students with learning techniques & skills in representing different
objects through 3D geometry and developing visualisation of 3-D , for using in the design
solutions.
CONTENT:- To familiarize students with the 3-dimensional drawings of the building and
perspective views.
UNIT-I Isometric/ Axonometric projections
Isometric /Axonometric of simple forms.
UNIT II Perspective Drawing :- Introduction to theory of Geometrical Perspective Drawing.
Perspective by Side Elevation Method.
Angular (Two Point Perspective)
and Parallel (One Point Perspective)
Perspective.
Perspective of different Solids and Building elements
Perspectives having more than 2 Vanishing Points.
1.
Two question are to be set from each unit . Student would be required to attempt one
question from each section.
Proper-dimensioned drawing is to be supplied to the student for the examination (i.e. Plan,
Elevations and Position of Picture Plane, Station Point and Horizon line etc.
2.
References:
Gill Robert W.; Rendering with Pen and Ink.

Bhatt N.D.; Engineering Drawing.
Ching Franc D.K ; Architectural Graphics.
Dhawan R.K; Engineering Drawing
B.ARCHITECTURE-II SEM.
ARCHITECTURAL GRAPHICS-II
(BACH--204)
Uni.Exam.Marks - 50
INTENT:-To develop conceptual and perceptual skills, in different media and techniques.
CONTENT:-Rendering in Pencils and Colour media.
UNIT-I -Pencil Crayons and Oil Pastels as presentation medium
Rendering of various surfaces such as brick, stone, grass, timber etc.
Trees, Human figures, Automobiles, Lamp Posts, Street furniture in Plan, Elevation and
Perspective.
Rendering of View / Perspective in Crayons and Oil Pastels.
UNIT-II-Water Colour Rendering.
Outdoor free hand sketching and Colour rendering of Trees, Shrubs, Vegetation,
Buildings, Vehicles etc.
Colour Rendering of various scenes such as Garden Scene, Street Scene, Lake Scene,
Village Scene, etc.
- Sketching of Furniture pieces, parts of Building in relation with Human Scale and
Proportions.
- Color Wheel.
Four questions are to be set, with Two question from each Unit The students are
required to attempt Two questions selecting One from each Unit.
Questions should be related to Buildings and its surroundings.
References:
Crowe Philip; Architectural Rendering
Albert & Habe ; Architectural Rendering
Jaxtheim ; How to Paint & Draw
..
B.ARCHITECTURE-II SEM.
THEORY OF DESIGN-I
(BACH-205)
Uni. Exam Marks - 60
INTENT :- To establish the Role and Importance of Theory of Design as a broad, comprehensive
activity to help students appreciate the difference between a responsible opinion and a well
reasoned judgement by looking at the design in depth and in a critical way .
CONTENT
UNIT-I
Principles of Architecture Design
Primary Elements of Design such as Point, Line, Planes and Volume.
Study of forms
UNIT-II
Visual Properties of Forms.
Regular and Irregular Forms.
Transformation of Forms.
Formal Collision of Geometry.
Articulation of Forms
UNIT-III
Form defining Space with Horizontal Elements and Vertical Elements.
Quality of Architectural Space.
Organization of Form and Space, Spatial Organization.
Circulation Elements including Approach, Entrance, Configuration of the Path,
Path- Space Relation, Form of the Circulation Space.
Proportion and Space.
1.
The examiner is required to set Eight Questions with minimum Two Questions from
Each UNIT
2.
Students are required to attempt Five Questions with minimum One Question from
each UNIT
References:
Form, Space and order- D.K.Ching.

Design strategies in Architecture- Geoffery H. Baker
(An approach to the analysis of Form)
Theory of Design-Parmar
B.ARCHITECTURE- II SEM
HISTORY OF ARCHITECTURE-I
(BACH-206)
Uni. Exam. Marks - 60
INTENT:- To make student understand how different Architectural Solutions were evolved (in
successive historical periods) within the limitation imposed by prevalent Social and Religious
Customs, available Building Materials , Climate of region/Topography, Complex Structural
Problems and the limited Technology available at the time.
CONTENT:- Study of World Architecture from the Early Stage to the Early Roman Period , Early
Era of Indian Architecture to the Buddhist Architecture.
For each of the topic given in syllabus, stress is to be laid on Architectural characters with
only one or two representative examples to highlight those features.
UNIT-I- Introduction and importance of History of Architecture
A brief introduction to Primitive/ Prehistoric Architecture.
Egyptian Civilization and its Architecture in terms of various building typologies-Mastabas, Pyramids, Temples, Palaces, Public Buildings etc.
Early Mesopotamian and Assyrian Architecture-Religious & Public BuildingsCitadels,
Ziggurats, Hanging Gardens etc.
Greek Civilization & Architectureincluding Religious/ Civic Buildings /Market
Place(Acropolis) of importance. Stress should be laid on
understanding the basic Principles of Architecture including Proportions and Theory
of Orders
UNIT-II- Introduction to Indus Valley Civilization & its ArchitectureCitadels, Granary, Housing,
Baths etc.
Vedic Architecture.
Buddhist Architecture- Stupas, Viharas, Chaitya Halls etc.
1. One Compulsory Question containing 6 question of 2 marks (12 Marks) each,
requiring short answers, are to be set from the entire syllabus.
2. Total Eight Questions are to be set from entire syllabus.
3. Students should attempt total five Questions including compulsory question..
NOTE:-Emphasis should be laid on understating of building evolution and form. Continuous
evaluation shall be made of students work based on various models, assignments and
sketching.
References:
Fletcher Banister; A History of Architecture
Brown Percy ; History of Architecture , Buddhist and Indian
Grover Satish; History of Architecture-Hindu & Buddhist Period
Fergusson James; History of Eastern Architecture
Tad gill. Indian Architecture
THEORY OF STRUCTURES -I
(BACH-207)
Uni.Exam.Marks - 60
INTENT:-Developing Material Skills in students to Analyse and Understand Fundamentals and
Working of various parts of different Structural Systems.
CONTENT:- Basics of structure mechanic to help make students understand the entire
Structure .
UNIT-I Aims, Objects and Scope of study of Theory of Structures for Architects.
Technical names and function of various Structural Components from Foundation to
Roof.
Fundamentals of Mechanics.
Indian Standard Codes.
Various types of Gravitational and Lateral Loads (I.S. 875) such as Dead, Live, Wind,
Earthquake etc. their impact and effect on Structures.
UNIT-II
Type of Forces, Cause- Effect , Concurrent Forces, Coplanar Forces and
Parallel Forces. Triangle Law of Forces, Parallelogram Law of Forces,
Equilibrium of Forces, Concept of Resultant, Conditions of Equilibrium by
Analytical and Graphical Methods, Beam reactions graphically and
analytically, Statically Equilibrium.
Link Polygon, method of Construction, Resultant of Concurrent Forces,
Coplanar Forces System
UNIT- II
Centre of Gravity, Definition, Centroid, Centre of Gravity of Plane Figures,
Centre of Gravity by Method of Moments, Centre of Gravity by Graphical and
Analytical methods.
Moment of Inertia; MI of Plane Area, MI by Method of Integration, MI of
Rectangular Section, Theorem of Parallel and Perpendicular Areas.
UNIT-IV
Moment of Resistance, Theory of Bending, Bending Stresses, Equation of
Theory of Bending, Sectional Modulus of Rectangular and Circular Sections.
UNIT- V
Analysis of Perfect Frame, Classification of Frames, Stress, Strain, Assumption,
Method of Section, Method of Joints, Design
example, Young Modulus, Shear Modulus, Bulk Modulus and relation
between them.
UNIT- VI
Bending Moment/ Shear Force, Type of Supports, Loads and Beams, Relation
between SF and BM, BM and SF diagram for Cantilever and Simply Supported
Beams with Pointed Load Uniformly Distributed Load--Design examples.

1. One Compulsory Question containing 6 question of 2 marks (12 Marks) each,
requiring short answers, are to be set from the entire syllabus.
2. Total Eight Questions are to be set from entire syllabus.
3. Students should attempt total five Questions including compulsory question..
NOTE:
REFERENCES:
Arya . A. S -Theory of Structure
Khurmi-Structure Mechanics
Rajput- Strength of Materials
Prof.Harbhajan Singh-Theory of Structure
WORKSHOP-II
(BACH-208)
Uni. Exam. Marks - No exam
Duration of Exam. Internal Viva Voce
INTENT
To make students aware of various Model Making Techniques and to familiarize them with the
Art of Sculpture Making using Different Materials.
CONTENT
Introduction to Basic Model Making Techniques with Paper, Paper Board, Woods,
Plaster of Paris and Soap for Basic Design and Architecture Design Studio .
UNIT-I-Product design
Design & Model Making of Furniture, Lamp shades and other Interior & Exterior
Elements
UNIT-II-Sculpture Making
Sculptures in Plaster of Paris, Wires, Scrap, Wood, Soap etc.
UNIT- III-Clay Modelling
Pinching
Coiling Techniques
Slab Techniques
UNIT IV-Model Making
Model Making ---Making of Study Model of one of Design Project done during the
Semester.
or of a Small Buildings
Continuous Evaluation shall be made of students work based on various Models,
Assignments and Market Surveys.
Evaluation will be made based on the Students work during Semester in Internal VivaVoce conducted by two internal examiners.
ENVIRONMENTAL SCIENCE
(EVSC 101)
Uni.Exam.Marks - 60
Objective/s and Expected outcome:
Upon successful completion of the course, students should be able to:
1. Measure environmental variables and interpret results
2. Evaluate local, regional and global environmental topics related to resource use and
management
3. Propose solutions to environmental problems related to resource use and management
4. Interpret the results of scientific studies of environmental problems
5. Describe threats to global biodiversity, their implications and potential solutions
SECTION-A
Introduction: Definition and scope and importance of multidisciplinary nature of
environment. Need for public awareness.
(2)
Natural Resources: Natural Resources and associated problems, use and over exploitation,
case studies of forest resources and water resources.
(4)
Ecosystems: Concept of Ecosystem, Structure, interrelationship, producers, consumers

and decomposers, ecological pyramids-biodiversity and importance. Hot spots of
biodiversity
(4)
Environmental Pollution: Definition, Causes, effects and control measures of air pollution,
Water pollution, Soil pollution, Marine pollution, Noise pollution, Thermal pollution,
Nuclear hazards. Solid waste Management: Causes, effects and control measure of urban
and industrial wastes. Role of an individual in prevention of pollution. Pollution case
studies. Disaster Management : Floods, earthquake, cyclone and landslides.
(5)
SECTION-B
Social Issues and the Environment From Unsustainable to Sustainable development,
Urban problems related to energy, Water conservation, rain water harvesting, watershed
management. Resettlement and rehabilitation of people; its problems and concerns. Case
studies. Environmental ethics: Issues and possible solutions. Climate change, global
warming, acid rain, ozone layer depletion, nuclear accidents and holocaust. Case studies.
Wasteland reclamation. Consumerism and waste products. Environment Protection Act.

Air (Prevention and Control of Pollution) Act. Water (Prevention and control of pollution)
Act. Wildlife Protection Act, Forest Conservation Act, Issues involved in enforcement of
environmental legislation Public awareness
(5)
Human Population and the Environment, Population growth, variation among nations.
Population explosion Family Welfare Programme. Environment and human health,
Human Rights, Value Education, HIV/AIDS. Women and child Welfare. Role of Information
Technology in Environment and human health. Case studies
(4)
Suggested Readings/ Books:

1. Agarwal, K. C. 2001 Environment Biology, Nidi Publ. Ltd. Bikaner.
2. Jadhav, H & Bhosale, V.M. 1995. Environment Protection and Laws. Himalaya Pub
House, Delhi 284p.
3. Rao M. N. & Datta A.K. 1987. Waste Water Treatment. Oxford & IBH Publ. Co. Pvt.
Ltd. 345 p.
4. Principle of Environment Science by Cunninghan, W.P.
5. Essentials of Environment Science by Joseph.
6. Environment Pollution Control Engineering by Rao, C.S.
7. Perspectives in Environmental Studies by Kaushik, A.
8. Elements of Environment Science & Engineering by Meenakshi.
9. Elements of Environment Engineering by Duggal.
III Semester Syllabus - 2012
B. ARCHITECTURE-III SEM.
ARCHITECTURAL DESIGN-III
(BACH-301)
Duration of Exam. 06 hrs. (Evaluation to be done through viva- voce by external examiner)
INTENT
To make students understand and appreciate the constraints in the designing of a
building of a small scale with reference to function, form and structure.
CONTENT
To create awareness about the role and Importance of physical factors in Architectural
Design e.g. orientation, ventilation, adequate protection from natural elements and human
dimensions in various postures (in applied form),their relation to everyday utilities
including table, chair, bed etc.
TOPICS
Design of House, Primary School, Cafeteria, Post Office etc without urban regulatory
controls with emphasis on environmental and ecological issues.
Introduction to barrier free buildings.
INSTRUCTIONS TO THE TEACHER
Minimum two projects/ assignments to be handled by students individually.

Library and prototype studies should be carried out for other projects in groups.
Model and perspective should be made integral part of project presentation.
Stress should be laid on the understanding the basics of process of design.

NOTE
Evaluation is to be done through viva voce by external examiner appointed by the
university at college.
Answer sheets after exam shall be retained by the college.
REFERENCE BOOKS:
Ching, Frank (Francis D.K.), Architecture: Form, Space & Order, Publisher John
Wiley, Hoboken 2007.
Parmar V.S, Design Fundamentals, Publisher-Somaiya Publisher Pvt. Ltd, Mumbai
1997.
Scott Van Dyke, Form, Line to Design, Publisher-Van Nostrand Reinhold, 1990.
Scott R, Design Fundamentals, Publisher-Robart E. Krieger Publishing Company
E&OE- Architects Hand Book and Planning
Donald Watson , Michael J. Crosbie, Time Saver Standard, 8th edition.
BUILDING CONSTRUCTION AND MATERIALS-III
(BACH-302)
Uni.Exam.Marks - 75
Duration of Exam 04 hrs
INTENT
To make students understand and appreciate, various methods of building construction in
coordination with the building materials and science related to them.
CONTENT
Subject consists of two unitsUNIT - I Building Materials- with emphasis on learning of material.
UNIT - II Building Construction- with emphasis on construction drawings by pencil only.
UNIT-I BUILDING MATERIALS
(a) Glass
Glass as a building material.
Classification, Composition, Properties and Use of Glass.
Character and uses of various types of Glass - Plate Glass, Wired Glass, Foam Glass,
Laminated Glass, Tinted Glass, Glass Wool, Glass Block, Fibre Glass, Crinkle Glass,
Obscured Glass etc.
(b) Timber Products
Manufacturing process and qualities of Decorative and Commercial Veneers

including Plywood, Particleboard, Fibreboard, Gypsum board, Batten board, Rice
husk board, and Bamboo board.

1. Section of a Double Storeyed Building through Toilet and Stair case showing the details
of Foundation, Floor, Window, Lintel,
Chhajja, R.C.C Roof, Terrace and Parapet.
(A) Types of Staircases-- Design and detailing of RCC and Timber Staircases.
(B) R.C.C. Form work and Shuttering details for Column (square and round)
Slab and Beam
Wall
Staircase
2. Flooring
Construction of PCC, Terrazzo, (Cast-in-situ and tiles) and various types of Stone
flooring.
3. Cladding
Cladding of interior and exterior facades in various materials such as Brick, Tiles,
Stone and Panelling
Market Survey to study complete range of products available in the market under
different trade names with their manufacturing details, specifications and performance.
Field visit to study the complete process of lying of reinforcement and concreting.
Preparing Construction plates on above topics
Emphasis shall be laid on understating of complete construction details of Double Storyed
structure.
One compulsory question of short answer type containing 5 questions of 2 marks each (10
Marks) is to be set from the entire syllabus (4 Marks and 6 marks from unit I and Unit II
respectively)
Three questions are to be set from UNIT-I and students are required to attempt two
questions.
Three questions are to be set from UNIT-II and students are required to attempt two
questions.
topics.
REFERENCES BOOKS
a)
b)
Building Materials
Rangwala S.C, Engineering Materials, Charotar Publishing House, India
TTTI , Engineering Materials,. Publisher-Tata McGraw-Hill Education, 2001
Deshpande -Engineering Materials
National Building Code 2005
Building Construction
MICHELL, ELEMENTARY BUILDING CONSTRUCTION, Published by B T
Batsford Ltd, London , 1961
PUNMIA B.C. , BUILDING CONSTRUCTION,
MCKAY W.B. , BUILDING CONSTRUCTION (VOL 1-4) , Longmans, U.K 1981
BARRY R. , CONSTRUCTION OF BUILDINGS(VOL. 1-4) Oxford : Blackwell
Scientific, 1999
CHUDLEY R. , CONSTRUCTION TECHNOLOGY (VOL. 1-4) Longmans, UK
1981
CHING FRANCIS D.K. , BUIL. CONSTRUCTION ILLUSTRATED, John Wiley,
New York 2003
ARCHITECTURAL DRAWING-III
(BACH-303)
Uni.Exam.Marks - 50
Duration of Exam. 04 hrs .
INTENT
To make students learn the techniques to represent different objects through 3D
geometry and developing skill for visualization of 3-D geometric forms for use in
Architectural designing.
CONTENT
Familiarizing with the 3-dimensional drawings of the building with Sciography.
Topics
UNIT-I
Sciography in Plans and Elevations
Sciography in Axonometric Projection
UNIT-II
Perspective by Grid Point method and Measuring Line method.
Sciography in Perspectives (both one point & two point perspectives)
Two questions are to be set from each unit. Students would be required to attempt one
question from each section.
Proper-dimensioned drawings are to be supplied to the students along with question
paper in examination (i.e. Plan, Elevations and Position of Picture Plane, Station Point
and Horizon line
REFERENCE BOOKS:
N.D. Bhatt V.M. Panchal, Engineering Drawing, Charotar Publisher 48th edition,
2005
Ching, Frank (Francis D.K.), Architectural Graphics, Van Nostrand Reinhold, 5th
ed. 2009
Robert W Gill, Manual of Rendering with Pen and Ink, Published on: 1990-04
Fraser Reeki, Reekies Architectural Drawing, Tony K. McCarthy Wiley, Aug1995
B.ARCHITECTURE-III SEM.
CLIMATE AND ARCHITECTURE - I
(BACH 304)
Uni.Exam.Marks - 60
Duration of Exam. 03 hrs
INTENT
To make students understand the role and importance of climate as one of the major
determinant of built form and to familiarize them with various climate controlling
devices.
CONTENT
UNIT I Fundamentals
Introduction to climatology
Importance of studying Building climatology
Elements of climate
Global climate factors
Interrelationship of climatic elements and Psychometric chart
UNIT -II Movement of Sun
Understanding the movement of Sun
Solar Chart and its importance
Importance of understanding the optimum orientation of buildings and their forms in
relation to Sun
Concept and Design of Shading Devices
UNIT III Thermal Comfort
Definition and explanation of Thermal Comfort
Human Heat Balance and Physical Comfort
Relationship of Climatic Elements with Thermal Comfort
Thermal Stress Index
Bio-climatic Chart, Effective Temperature and Corrected Effective Temperature
Histogram with their uses
UNIT IV Climatic Zones
Tropics and its Climatic zones

Macro and Micro Climate( site climate)
Role of Climate with respect to Shelter
Study of various Indigenous Shelters in response to various Climate Zones in the
Tropical belt of India
Principles of Architectural Design in different Climatic Zones in India ( As per
National Building Code)
One compulsory question of short answers type containing 5 questions of 2 marks each
(10 Marks) is to be covering entire syllabus
Two questions are to be set from each UNIT and students are required to attempt One
question from each unit.
Students are required to attempt five questions
Question paper is to be set covering entire syllabus by making parts and mixing the
topics.
REFERENCE BOOKS
Koensberger, Ingersoll, Mayhew,Szokolay , Manual of Tropical Housing &
Building, March 1974
C.P. Kukreja,Tropical Architecture,Tata McGraw-Hill Publishing Company, 1978.
Martin Evans, Housing, Climate & Comfort, Architectural Press, 1980.
Lippsmeier, Georg, Building in the Tropics, Callwey Verlag, Munchen, 1980
Gideon S. Golany, Design for Arid Regions, Publication Van Nostrand Reinhold,
New York 1983.
B.Givoni, Man, Climate & Architecture, Von Nostrand Reinhold Company New
York - 1981
Reserch notes on climate:- C.B.R.I, Roorkee
Krishan A,Baker, Climate Responsive Architecture, McGraw-Hill Education (Asia)
Co. and China Architecture & Building Press. 2004/2005
Energy Efficient Buildings in India:- TERI
COMPUTER APPLICATIONS - I
(BACH 305)
Uni.Exam.Marks - 50
Duration of Exam. External Viva Voice
INTENT:
To make students aware of the role and importance of Computers in the field of
Architecture.
CONTENT:
Teaching basics of Computers including introduction to basic hardware, operating

systems and operative languages.
TOPICS
Basic commands like copy, paste, stretch, offset, move fillet, extend, trim and other
2D commands.
2D modelling in Auto Cad, Auto Cad Revit, Google Sketch up,
Drawing the basic Plans, Sections, and Elevations.
Basic Text writing and dimensioning of the Plans, Elevation and Sections.
Basic hatching and filling of the Walls in the Plans, Elevations and Sections.
Basic rendering in the Auto Cad and in other Softwares in 2D.
GUIDELINE TO TEACHER
The small building plans to be promoted and evaluated at the end of the semester.
Emphasis should be laid on understating of building 2 D Drawings and techniques for
the single as well as multistoried buildings.
GUIDELINES FOR EXAMINER
The evaluation of student shall be based on the written questions to be set from the
course and the practical conducted based on a specific problem given to know the
students understanding of the Computers in the field of Architecture.
REFERENCE BOOKS:
AutoDesk , Auto Cad Manual 2012
Google, Google Sketch up Manual
Microsoft, MS DOS
STRUCTURAL SYSTEM-II
(BACH -306)
Uni.Exam.Marks - Nil
Duration of Exam. Internal Viva Voce.
INTENT
To make students aware about basic principles applicable in various structural
systems.
CONTENT
To make students learn basics of structure with emphasis on learning by doing and
making 3-D models to provide the student with different spatial experience.
TOPICS
UNIT - I
Structures acting mainly through Composition of Compression and Tension members
such as Vector-active structure system in co-active tension and compression in;
a) Space frames.
b) Trusses (Timber & Steel).
c) Domes (Ribbed & Geodesic)
UNIT - II
Structure acting mainly through Material Bulk and Continuity i.e..Bulk Active
Structure System or Structure Systems in Bending in:
a) Slabs (One way & Two way)
b) Beams (Simply supported, Cantilever, Vier-endale Girders)
c) Grid (Skew & Square Grid)
TEACHING METHODOLOGY
a) The predominantly pictorial nature of the Architect's language.

b) The physical-mechanical essence of the subject matter.
c) The orientation of all Architectural efforts to Form and Space.
NOTE: Evaluation is through Internal Viva Voice of the work done by the student during
the semester.
REFERENCE BOOKS:
Engel H, Structure Systems
Salvadori Mario, Building of Building
Butler Robert B, Architectural Engineering Design: Structural Systems
Schierle G G, Architectural Structure
Moore Fuller, Understanding Structure
STRUCTURE DESIGN- I
(BACH 307)
Uni.Exam.Marks - 60
INTENT :
To make students understand the Role and Importance of Structure in Built
Environment and to create skill among students to apply the knowledge gained
regarding structural design in an applied project and to make buildings structurally
safe .
CONTENT:
This course is foundation course for the student
Unit-I
Design of Foundations in Masonry work-- Safe Bearing Capacity , Load on
Foundations, Depth of Foundation, Rankines formula, Footing Sections .
Unit-II
Design of Retaining Walls in Masonry-- Loads, Resultant Pressure, Stability of
Structure, Middle Third Rule, Design examples.
Unit-III
Design of Columns and Walls in Masonry-- Allowable Stress, Cross- Sectional Area
Factor, Shape factor, Slenderness Ratio, Effective Height/Length, Effective Thickness,
Load Factor, Design examples
Unit-IV
Design of Simple Timber Beam, Bending Stress Check, Shear Check, Deflection
Check, Bearing Check, Design examples with UDL and Concentrated load.
Unit-V
Design of Truss Members for given Load, Compressive Stress, Tensile Stress etc
(10 Marks) is to be set from the entire syllabus
In addition, Eight questions are to be set from the entire syllabus
Students are required to attempt in all five questions
Question paper is to be set covering entire syllabus by making parts and mixing the topics.
REFERENCE BOOKS:
R. K. Bansal, Engineering Mechanics & Strength of Materials Publisher, Laxmi

Publications Pvt Limited, 1998.
Applied Mechanics:- K.L.Rao
J. C. Mehta,Applied Mechanics, Publisher: Delhi, New Asian Publishers 1963.
Stephen Timoshenko, Strength of Materials, Publisher, Van Nostrand, New York

1955.
B.ARCHITECTURE - III SEM.

SURVEYING AND LEVELLING-I
(BACH-308)
Uni.Exam.Marks - 60
INTENT
To make students understand and learn about and basics of surveying and levelling
and its application in the art and science of designing buildings
CONTENTS:
1. Introduction : Different types of surveys.
2. Chain Surveying : Principal of chain surveying description of different equipment, Methods of chaining
and booking, selection of base line and stations, obstacles in chaining. Location of
inaccessible points by chain, Ranging rods.
3. Prismatic Compass survey: Description of Prismatic & surveyors compass methods of traversing, local attractions
and its elimination, adjustment of closing error by graphical method.
4. Plane Table survey: Description of different equipment, different methods of plane tabling, Strength of
Fix, Two point and three point problems and their solutions.
5. Levelling: Description of dumpy and tilting levels & levelling staves, methods of levelling,
Sensitivity of bubble tube, setting out grade lines, permanent adjustment of levelling
instruments.
6. Contouring: Setting out contour gradient, different method of contouring. Simple earthwork
,calculations of areas and volumes.
7. Minor Instruments: Box sextant, Hand level, Abney level, Plane meter, Ghat tracer, Tangent
Clinometers, etc.
8. Total Station
Introduction, Various components, Operation, Advantages/ Disadvantages
Subject shall be taught by a teacher who has practical experience of carrying out field
surveys while working on Architectural /Engineering Projects. The teaching shall be
supported by undertaking actual surveys of any area/ building in and around the
campus to give exposure to the students. All the equipment , stated above, shall be
made available to the students by setting up of a Survey lab.
GUIDELINES TO EXAMINER
One compulsory question of short answer type of 10 Marks are to be set from the entire
syllabus
The examiner is required to set eight questions.
Students are required to attempt five questions.
REFERENCE BOOKS:
Singh Narinder, Surveying & leveling
T.P.Kanetkar Surveying & leveling: Punmia B C, Surveying & leveling
Kuchhar C L, Surveying & leveling
Kanetkar & Kulkarni, Surveying & leveling
Sahiwney P B, Surveying & leveling
IV Semester Syllabus - 2012
B.ARCHITECTUREIV SEM.
ARCHITECTURAL DESIGNIV
(BACH-401)
Duration of Exam. 06 hrs . (Evaluation to be done through viva- voce by external examiner)
INTENT
1. To make students appreciate the elements of vernacular/rural Architecture of a
particular Region of the state of Punjab.
CONTENTS
2. Study of the Social and Physical environment and methods of construction in
Vernacular/Rural Architecture, emerging out of the traditional way of life of the
people in a given place .
TOPICS
3. Design and study of Rural, Vernacular, Historical Settlements/buildings of distinct
Architectural characteristics including detailing with physical planning and other
systems.
BUILDINGS
(a)
Community Buildings Bank, Post office, Panchayat Ghar, Rural Dispensary,
Farmers House, Gaushala, Village Dairy Farm, Rural School etc.)
NOTE:-All buildings should have accessibility to the physically challenged persons.
Minimum two projects/assignments should be handled by students during the
semester including detailed study of a representative village .
Village study shall be done in groups to clearly bring out the existing settlement
pattern, socio-economic conditions, pattern of life, building typology,
materials/building technology used and important Architectural features. The end
product shall be a well documented report and drawings.
Library/case study shall be made integral part of every
Model and perspective will be made compulsory in each assignment.

university at college and answer sheets should be retained at college level.
REFERENCE BOOKS :
Ching, Frank (Francis D.K.), Architecture : Form,Space & Order, Publisher John
1997.
Donald Watson , Michael J. Crosbie, Time Saver Standard, 8th edition
B. ARCHITECTURE - IV SEM.
BUILDING CONSTRUCTION & MATERIALS-IV
(BACH-402)
Uni.Exam.Marks - 75
INTENT
To make students understand and appreciate, various methods of building construction in
coordination with the building materials and science related to them.
CONTENT
This subject consists of two units
UNIT - I Building Materials with emphasis on learning of material.
UNIT - II Building Construction with emphasis on construction drawings by pencil only.
TOPICS
UNIT-I:-BUILDING MATERIALS
(A) Roof-Coverings - Constituents, Properties, Uses, Process of Laying of Roof
Covering Materials e.g. G.I. Sheets, Asbestos Cement Sheets (Plain & Corrugated )
with accessories, Clay Tiles - Country, Allahabad & Mangalore Tiles etc.
(B) Floor Coverings- Constituents, Properties, Uses and Process of Laying of Floor
Covering Materials e.g. Linoleum, Cork Sheet, Parquette, Rubber (Tiles and Sheets)
and Types of Stone Flooring.
(C) Plastic - Introduction, Advantages, Properties, Types and Uses as Building Material .
Thermoplastics, Polythene, P.E.(Low density and high density) Poly Venyl Chloride,
P.V.C. Polystructure P.S. Application of plastics in Buildings.
Roofs and Trusses (Timber)
Introduction to different types of Roofs e.g. Flat, Couple, Close Couple, Collar, Leanto and Double Lean- to roofs.
Principles of Construction and Details of King Post and Queen Post Trusses with
Gutters, Eaves and Ridge Details with / without Soffit and Roof Covering.
Timber Built up Trusses of various Spans.
Doors & Windows - Design and Details of Sliding Doors, Sliding and Folding Doors
in Timber.
Timber partition, glass block partition ,timber panelling
Timber Staircase-Design and Details
Dhajji Wall Construction
Field/ Project visits to study the uses of various materials in construction industry and
process of laying Floor/Roof Coverings, Staircases and Doors and Windows ..
Preparing Construction plates on above topics
Market study of the products available under different trade names with details of
their manufacture, specification and performance.
GUIDELINES
c)
One compulsory question of short answer type 5 question of 2 marks (10 Marks) each are
to be set from the entire syllabus (4 Marks and 6 marks from unit I and Unit II
respectively)
Three Questions each are to be set from UNIT-I and UNIT-II. Students are required to
attempt Two questions from each Unit..
Questions paper is to be set covering whole of the syllabus by making parts and mixing the
topics.
d)
e)
REFERENCE BOOKS:
a) Building Materials


b)
Building Construction
Scientific, 1999
1981
New York 2003
B.ARCHITECTURE - IV SEM.
ARCHITECTURAL PRESENTATIONIII
(BACH-403)
Uni.Exam.Marks - 50
INTENT
To make students aware and develop Conceptual and Perceptual skills, in different
media and techniques.
CONTENTS
Rendering in Pencils and Colour media.
UNIT-I Pen & Ink Rendering
Use of Pen & Ink Rendering to show Texture of Grass, Brickwork, Stone work, Sky,
Trees, Human figures etc.
Stencilling in Ink
Calligraphy Handwriting
UNIT-II Colour Rendering
Use of all Colour Mediums to render Complexes /Buildings with Trees, Automobiles,
and Roads
Rendering of Design Problem in any Colour Medium
Cut & Paste method for making Compositions & for Rendering Perspectives
Students will be made to experiment with Pen , Pencil and Colours to draw/ render
objects, landscape elements, buildings and components which form integral part of
built environment both indoor and outdoor.
Teaching of the subject shall be made integral part of Architectural Drawing Projects.
Two Questions each are to be set from UNIT-I and UNIT-II. Students are required to
attempt One question from each Unit.
REFERENCE BOOKS:
Ching, Frank (Francis D.K.), Architectural Graphics, Van Nostrand Reinhold, 5th
ed. 2009
Gill Robert W, Manual of Rendering with Pen and Ink, Published on: 1990-04
Visual Design-A Problem Solving Approach:- LallinCarref
Bhagwat Gajanan Desai A, Visual Art & Basic Study, Somaiyya Publication
Creative Colour:- Faber Bissen
Gerritsen Frans, Theory of Practice of Colours, Publisher, Cengage Learning, 1975
HISTORY OF ARCHITECTURE-II
(BACH-404)
Uni.Exam.Marks - 60
INTENT
To make students understand how different architectural solutions were evolved (in
successive historical periods) within the constraints/limitations imposed by prevalent social
and religious costumes, available building materials, prevailing climate, topography,
complex structural problems and building technology available at the time.
CONTENT
Study of world Architecture from the early stage to the Early Roman period besides the
early era of Indian Architecture and Buddhist Architecture.
TOPICS:
UNIT-I
Roman Architecture
Christian Architecture
Byzantine Architecture
Romanesque Architecture
UNIT-II
Chulkyan and Ashoka period of Hindu Architecture
Dravidian Architecture
Indo Aryan Architecture
Orissa
Gujrat
Khajuraho
For each period given in syllabus, stress is to be laid on the Architectural character and
elements of Architecture with only one or two representative examples to highlight
those features
Emphasis should be laid on understating of evolution of buildings and form. Continuous
evaluation shall be made of students work based on various models, assignments and
sketching
One compulsory question of short answers type containing 5 questions of 2 marks each (10
Marks) is to be set from the entire syllabus
Four questions are to be set from each UNIT and students are required to attempt two
questions from each unit.
Question paper is to be set covering entire syllabus by making parts and mixing the topics.
REFERENCE BOOKS:
Fletcher Banister, A History of Architecture, University of London, The Antholone
Press, 1986.
A History of Architecture :- James Fergusan, John Willey
Fergusan James, Willey John, History of Indian & Eastern Architecture, Dodd,Mead &
company 1899
Tagdell Christopher, The History of Architecture in India, Phaidon Press,1994
B.ARCHITECTURE III- SEM

THEORY OF DESIGN-II
(BACH-405)
Uni.Exam.Marks - 60
INTENT
To make students understand the complex Architectural problems and appreciate the
basic principles / philosophy of design used by Masters of modern architecture to
achieve optimum solutions and to assess their contributions by their own criteria.
CONTENT
Understanding the basic concepts of designing the buildings by the Master Architects
TOPICS
Unit -- I
Louis Sullivan, the Skyscraper and Form Follows Function.
Frank Lloyd Wright and Organic Architecture.
Walter Gropius, the Bauhaus and the Architects Collaborative(TAC)
Unit II
Mies Van der Rohe and his Dictum "Less is More"
Works of Le-Corbusier.
Works of Alvar Alto
For each Master Architect given in syllabus, stress is to be laid on the his life, history,
approach , philosophy and Architectural works including character and elements of
Architecture developed with representative examples to highlight those features
Emphasis should be laid on understating of evolution of buildings and form.
Continuous evaluation shall be made of students work based on various assignments
and sketching.
(10 Marks) is to be set from the entire syllabus
Three questions are to be set from each UNIT and students are required to attempt two
Students are required to attempt five questions
Question paper is to be set covering entire syllabus by making parts and mixing the
topics.
REFERENCE BOOKS:
Ching, Frank (Francis D.K.), Architecture: Form, Space & Order, Publisher John Wiley,
Hoboken 2007
Design strategies in Architecture Geoffery:- H. Baker
(An approach to the analysis of Form
Global Architecture (ADA Aditia Tokyo) Vol - 2, 3 & 4.

Press, 1986.
Mies Vander Rohe by David Spaeth.
Mies Vander Rohe by Karin Krisch.
The Frank Lloyd Wright Companion by William Allin Storrer.
Frank Lloyd Wright- The Masters Works by David Larkin & Bruce.
Le Corbusier by H.Allen Brooks.
B.ARCHITECTURE -IV SEM.

CLIMATE & SUSTAINABILITY-II
(BACH-406)
Uni.Exam.Marks - 60
INTENT
To acquaint the students and make them aware of the concept of climate as a
significant determinant of built forms and to familiarize them with various climate
controlling devices.
CONTENTS
UNIT -I Ventilation in Buildings
Ventilation - Introduction and its mechanism
Wind Movement
Air movement within and around buildings, effect of surrounding elements and
pattern of wind flow.
Guidelines for designing well ventilated buildings
Optimum Orientation of BuildingImportance, Form and Placement of Building

UNIT -II Solar Radiations
Introduction to basic Thermal Units
Theory of Heat Flow, Heat Transmission etc.
Thermal Properties of various Building Materials .
Solar Radiations- Movement of Sun, Method of Recording, Radiation Gains by

various Materials
Study of various Landscape Elements and Solar Passive Devices for Climatic Control
within Buildings
Introduction to Ecotech and Design Builder Software.

UNIT-III : SUSTANIBILITY
Sustainability - Concept ,Definition, Importance and Scope
Sustainable Buildings- Concept, Importance, Approach ,Design Principles and
Advantages
Introduction to ECBC Codes,
Introduction to GRIHA.
Introduction to Energy Demand and Consumptions.
Energy Saving Technique in Buildings.
Alternate Energy Sources in India.
Teaching in the subject shall be made a combination of guest lectures by Experts,
visits to the existing Green Buildings, attending seminars organised by the
Professional Bodies/ others and preparing Models/ Charts to make students familiar
with use of natural elements as essential input to design sustainable buildings
syllabus
The examiner is required to set two question from Unit I and three questions each from
unit II and Unit III- total Eight Questions.
Students are required to attempt five questions with minimum one from each UNIT
REFERENCE BOOKS:
New York 1983.
York - 1981
B.ARCHIECTURE -IV SEM.

COMPUTER APPLICATIONSII
(BACH-407)
Uni.Exam.Marks - 50
Duration of Exam. No Exam ( External Viva Voice)
INTENT
To make students aware of the role and importance of Computers in the field of
Architecture
CONTENT
Being advance learning course ,students will be introduced to 3D- and rendering
techniques of the buildings.
UNIT I
3-D Modelling on Auto cad of Single Story and Multi Story Buildings,
3-D Modelling of Multiple Building in a Single Site, Camera View of the Buildings,
3-D Modelling on 3-D Max.
View on Google Sketch Up
UNIT -II
Rendering of the View on any of the following Software

- 3D- Max,
- Photoshop,
- V-ray and
- Any other Software.
UNIT -III
Basic of Animation on Google Sketch up /3D-Max

Emphasis should be laid on developing the skill pertaining to 3-D on the Softwares
The evaluation of student shall be based on the written questions to be set from the
course and the practical conducted based on a specific problem given to know the
students understanding of the Computers in the field of Architecture related to course
contents defined above.
B.ARCHITECTURE-IV SEM.
BUILDING SERVICES-I
(BACH- 408)
Uni.Exam.Marks - 60
INTENT
To make students learn and understand the requirements of Building Services and their
application to buildings with focus on Water Supply, Drainage and Sanitation
CONTENTS
UNIT-I -WATER SUPPLY
Water- Role & Importance, Sources ,Quality ,Impurities.
Water Supply- Introduction, Basic Principles, Systems of Water Supply
Water Storage Systems, Capacity and Location.
Calculation of Water consumption.
Domestic, hot and cold water supply systems.
Pipes- Size and their jointing details.
Fittings- sanitary fittings like Ferrule, Stopcock, Bibcock etc.
Metering- Various kinds of Water Meters and connections.
UNIT-II - SANITATION
Sanitation- Role, Importance , Basic principles of disposal of waste from buildings.
Dry and Wet Carriage Systems.
Sanitary Fittings-- Wash basins, WCs, Bath Tubs, Sink, Urinals, Bidets, Flushing
Cistern, Traps etc.
Various types of joints
Septic Tanks, Treatment Plants.
Manholes, Chambers- Purpose, Location, Structure and Ventilation
Drainage Systems- Types, Advantages/Disadvantages -- separate, combined and
partially combined systems.
Stack system--One pipe and two pipe systems.
Testing of Drains.
Gradients-- Purpose and Principle for laying Drains and Sewers. Self -cleansing and
non-scouring velocities
Size of Drain Pipes and Materials used.
UNIT-III ----STORM WATER DISPOSAL
Types of Roads-WBM (water bound macadam) Road-Tar, Bitumen, Asphalt and RCC
roads.
Description and Suitability of Roads for Storm Water Drainage with Comparative
Cost Analysis.
Pavements- Types (Soil stabilized, Brick and Stone paving), Use,
Advantages/Disadvantages
Drainage- Sub- drains, Culverts, Ditches, Gutters, Drop inlets and Catch Basins.
Rain Water Disposal for individual buildings.
Rain Water Harvesting
Subject shall be taught through the combination of Guest Lectures, Field visits, Visits
to the Project Sites , actual display of Fittings, Pipes, Joints used and by carrying out
exercises in layout of simple drainage systems for Small buildings, Planning of
Bathrooms and Lavatory Blocks in Domestic and Multi-storied buildings
.Exercises shall be clubbed with Design Studio Project
One compulsory question of short answer type of 10 Marks are to be set from the
entire syllabus
The examiner is required to set eight questions with minimum two from each UNIT
REFERENCE BOOKS:
DUGGAL K.N. , PUBLIC HEALTH SERVICE, Publisher, Chand, 1967
WATER SUPPLY SANITATION BY R.BIRDI
BARRY R, BUILDING SERVICES, John Wiley and Sons Ltd 1998
GARG S. K, WATER SUPPLY ENGINEERING, Khanna Publishers
WATER SUPPLY& SANITATION:- G.S BINDRA/ J.S..BINDRA
B.ARCHITECTURE - IV SEM.
STRUCTURE DESIGN - III
(BACH-409)
Uni.Exam.Marks - 60
INTENT
To make students understand the Role and Importance of Structure in Built

Environment and to create skill among students to apply the knowledge gained
regarding structural design in an applied project and to make buildings structurally
safe with focus on RCC
CONTENT:
Unit-I- Beam
Design of Single Reinforced Beams, Doubly Reinforced Beams, Cantilevered Beam,
Depth/ Thickness of Section Area of reinforcement,
Steel Shear Check, Shear Reinforcement

Introduction to T- Beams and L- Beams.
Design Examples
Unit-II- Slab
Design of One Way Slab ,Depth/Thickness of Section Area of Reinforcement, Shear
Check
Design of Two Way Slab
ly /lx ratio
I S 456 Code- provisions and their check,
Design Examples.
Unit-III Staircase
Design of Dog legged Stair;
Design of Tread and Riser,
Different bonding,
thickness of Waist slab/Landing slab, area of reinforcement,
Design Examples
Unit-IV-Columns
Design of Columns,
Long /Short Columns,
Basic Equation of Design
IS 456 Code Provisions,
Section of Column,
Longitudinal and Lateral Reinforcement.

Design Examples.
Unit-V Footings
Design of Isolated Square and Rectangular Footings in Depth Frame
Consideration of Bending Moment
One Way Shear, and Two Way Shear Area of reinforcement,

Design Examples.

Total ten question are to be set. Two questions from each unit.
Students shall be required to attempt total five questions ,with One question from
each unit.
REFERENCE BOOKS:
I S 456 CODE BOOK
RCC:- Krishna Murthy
RCC:- V.K. Shah
Jain A.K. , RCC, Lakshmi Publication (P) LTD

Rani Vazi, RCC, Khanna Publishers New Delhi. 2000
V Semester Syllabus - 2012
B.ARCHITECTURE V SEM.
ARCHITECTURAL DESIGN-V
(BACH- 501)
Duration of Exam. 12 hrs . (Evaluation to be done through viva- voce by external examiner)
INTENT:
To make students understand the components of the design of a multi functional public
building involving circulation and interrelation of different parts and the context of
multidisciplinary approach towards the complexity in structure & services.
TOPICS
Design of structures of simple and normal complexity and detailing of buildings such
as:
Unit I: Hotels, Motels, Restaurants, Hostels, Club Houses etc.
Unit- II:Institution and Public Buildings- Museum, Libraries and Court Houses etc.
NOTE: All buildings should have accessibility to the physically challenged persons
Minimum one building from each unit shall be taken in class as the design Project.
Emphasis shall be given to promoting creative skill along with other design
considerations.
The study of similar buildings shall be made integral part of design, duly supported
by models and perspectives
Library study shall be carried out in groups.

university at college and answer sheets should be retained at college level.
REFERENCE BOOKS :
1997.
B.ARCHITECTURE V- SEM.
BUILDING CONSTRUCTION & MATERIALS-V
(BACH-502)
Uni.Exam.Marks - 75
INTENT:
To make student study and understand various constructional details in metals i.e. Steel
& Aluminium in co-ordination with study of materials & science related to them.
UNIT-I : BUILDING MATERIALS
The study of manufacturing process, casting, characteristics, form and uses of Cast Iron,
Wrought Iron, Steel, Stainless Steel, Aluminium, copper and as building materials.
Properties and applications of copper, titanium and carbon fiber.
Various structural members, Sections and Joinery in Steel, Aluminium and PVC.
UNIT-II: BUILDING CONSTRUCTION

a) Steel, Aluminium, and PVC
Doors and windows
Frames
Sliding door
b) Aluminium, and PVC
Partition Walls
c) Steel Trusses
Steel Trusses
Constructional details of Simple Truss, North Light Truss
d) Constructional details of Steel flooring, Steel, beams, Column (stanchions), Grillage
Foundation & Staircase details.
Field visits to study the uses of metals in construction industry and process of laying
of Steel Trusses, Aluminium and Pre-stressed.
Study of Joinery of metals in workshop.
Preparing Construction plates on above topics.
Market study of the products available under different trade names with details of
their manufacture, specification and performance.
One compulsory question of short answers type containing 5 question of 2 marks each
(10 Marks) are to be set from the entire syllabus (4 Marks and 6 marks from unit I and Unit
II respectively).
Three questions each are to be set from UNIT-I and UNIT-II and students are required to
attempt two questions from each unit.
Questions paper is to be set covering whole of the syllabus by making parts and mixing the
topics.
REFERENCE BOOKS:


b) Building Construction
Scientific, 1999
1981
New York 2003
B.ARCHITECTURE V SEM.
HISTORY OF ARCHITECTURE-III
(BACH-503)
Uni.Exam.Marks - 60
INTENT
To make students understand how different architectural solutions were evolved (in
successive historical periods) within the constraints/limitations imposed by prevalent
social and religious costumes, available building materials, prevailing climate,
topography, complex structural problems and building technology available at the time.
UNIT-I
Gothic Architecture
Renaissance Architecture- Origin, growth and development in Europe
Mannerism - Basic contents and its impact on the development of Architecture
Baroque & Rococo style.
UNIT-II
Architecture of Imperial or Delhi style under various rulers.
Architecture of Provincial Styles
Architecture of Mogul period
For each of the period given in syllabus, stress is to be laid on making students
understand the Architectural Characters/ features , building evolution and form with
Continuous evaluation shall be made of students work based on various models,
assignments and sketching.
syllabus
Total Eight questions are to be set. Four questions from each unit
Students should attempt total five questions with Two Questions from each Part.
REFERENCE BOOKS:
Brown P, History of Architecture Buddhist and Indian, Taraporevala and sons, Bombay,
1983.
Grover Satish, Islamic Architecture in India, CBS Publishers & Distributors 2010
Press, 1986.
A History of Architecture:- James Fergusan, John Willey
Fergusan James, Willey John, History of Indian & Eastern Architecture, Dodd, Mead
& company 1899
B.ARCHITECTURE V- SEM.
THEORY OF DESIGN-III
(BACH-504)
Uni.Exam.Marks - 60
INTENT
To make students drive deeper into the Architecture problems and look for directive
principles guiding the philosophy of design used by masters of modern Architecture
and to assess their contribution by their own criteria.
CONTENTS
UNIT- I: FOREIGN ARCHITECTS
1.Louis I.Kahn
2.Eero Sarinen
3.Philip Johnson
4.Paul Rudolph
5.John Utzon
6.Kenzo Tange
7. Laurie Baker
UNIT-II : INDIAN ARCHITECTS
1. A.P.Kanvinde
2. C.M. Correa
3. B.V.Doshi
4. J.A.Stein
5. U.C.Jain
6. Raj Rewal
For each of the Architect given in syllabus, stress is to be laid on making students
understand the contribution made by the Architect through the Architectural Characters/
features, building evolution and form developed with representative examples to
highlight those features.
syllabus
The examiner is required to set eight questions with minimum two from each UNIT
REFERENCE BOOKS:
M.U.Jogelekar -Contemporary Indian Architecture Housing and urban development.
Global Architecture-Vol.-1,2,3,4.
Encyclopedia of Architecture
Kanvinde A.P. Campus planning in India.
Moderen Architecture Since 1900.
B.ARCHITECTURE - V SEM.
LANDSCAPE ARCHITECTURE-V
(BACH-505)
Uni.Exam.Marks - 60
INTENT
To make students understand the elements of Landscape Design and its application in
Architectural Design solutions.
TOPICS
UNIT I
Introduction to Landscape Architecture.
Elements of Landscape design and its relation to the built environment
Plant characteristics, plant propagation and impact of climate, soil and manure.
Structure, Colour, Form, Foliage of various types of Trees, Shrubs, Cacti Bushes and
Creepers etc.
Identification and study of a few Indian plants and trees.

UNIT II: Study on comparative basis of development of landscape design through history:
Indian Gardens
Persian Gardens
Mogul Gardens
Japanese Gardens
Italian Gardens
French Gardens
English Gardens
Teaching shall be imparted through a combination of lectures by subject experts,
visits to the historical gardens developed over the period, landscape projects of
repute, study of native and other trees etc
Continuous evaluation shall be made of students work based on assignments and
sketching.
syllabus
Students are required to attempt a total of five questions.
REFERENCE BOOKS:
Reid Grant W, Landscape Graphics
Littlewood Michael, Landscape Detailing
Harris and Dines, Time Saver Standard for Landscape Architecture- Plants of India
Tony Russel & Catherine Cutler, Trees- An Illustrated Identifier and Encyclopedia
Simonds, Landscape Architecture
Laurie Michael, Introduction to Landscape Architecture

Watts Rajnish/Dhillon Harjit/Chhattar Singh, Trees of Chandigarh
Krishan Pradip, Trees of Delhi
Bose D K/ Sharma S P/ Chaudhaury B, Tropical garden plants in colors
Randhawa M S, Flowering Trees and Shrubs of India
Randhawa M S, Beautifying India
STRUCTURE SYSTEM-III
(BACH-506)
Uni.Exam.Marks - No Exam
Duration of Exam. No Exam
INTENT
To inculcate and promote among students an awareness of structural principles
involved in various building systems.
TOPICS
UNIT I: Form Active Structural System or Structural System in Simple Stress Conditions:
a) Cable Structures (Roofs, Bridges etc.)
b) Tents Structures
c) Pneumatic Structure.
UNIT II: Surface active Structure System:
a) Shells.
b) Folded Plates.
UNIT-III
(a) Vertical Structure System for High Rise Buildings.
Emphasis shall be laid on learning by doing by making of 3-D models to give the
students an idea of different spatial experience.
(i) The predominantly pictorial nature of the Architects language.
(ii) The physical - mechanical essence of the Subject matter.
(iii) The orientation of all Architectural efforts to Form and Space.
EVALUATION METHODOLOGY
Evaluation of students shall be done by an Internal Jury constituted by the Director/
Principal of the Institute based on the Viva- voce and the work done by the students in
terms of models etc.
The internal marks will be split into 30 marks awarded by the internal jury and 20
marks by the subject teacher.
REFERENCE BOOKS:
Engel H, Structure Systems
Salvadori Mario, Building of Building
Butler Robert B,Architectural Engineering Design: Structural Systems
Schierle G G, Architectural Structure
Moore Fuller, Understanding Structure
BUILDING SERVICES II
(BACH-507)
Uni.Exam.Marks - 60
INTENT
To make students understand the basics and application of complexity of problem
involving Electrical and Mechanical Services in buildings and how to make
buildings safe against Fire
CONTENTS
UNIT-I
ELECTRICAL SERVICES
Electricity- Ohms , Kirchhoffs Laws and basic Principles.
Electric Circuits-- Series and Parallel.
Domestic installations- Water heater, Radiator etc.
Wires- Specifications /Carrying capacity , Electrical loads.
Types of Switches, Sockets and Fixtures.
Distribution Boards, Circuit Breakers, Fuses, Electrical Meters and their layout.
Design considerations for Electrical Installations from generation to
distribution(Energy Flow Diagram).
Protection against Overload, Short circuit, Earth fault, Lightening and other safety
measures for buildings.
Wiring systems- Materials, Types/Methods of wiring
UNIT-II ILLUMINATION
Light - Propagation, Reflection, Radiation, Transmission and Absorption.
Illumination Laws, Measurement, Luminous Intensity, Brightness, Luminance Flux,

Glare and their effect.etc.
Illumination Schemes- Types and their design considerations.

Light Flux method for calculation of number of lamps for illumination.
Lamps-Incandescent, Sodium Vapour, Mercury Vapour, Fluorescent and Neon lamps
etc.
Types of Luminaries for interior and exterior lighting.
Residential, commercial, industry, flood and street lighting.
Testing before commissioning of electrical services.
UNIT-III: FIRE SAFETY
FireCauses, Spread, Combustibility of Materials and Safety Norms.
Fire Detection/Warning- Equipment including Smoke Detectors, Monitoring Devices,
Alarm Systems. Etc.
Fire Fighting Planning, Designing, Installations, Equipment, Operation and
Maintenance.
Design Criteria for Fire Exit and Escapes in High Rise Buildings.
UNIT-IV- MECHANICAL CIRCULATION
Lifts-Types, Control and Operation, Carrying Capacity, Rated Load, Rated Speed,
RTT etc.
Lift - Sections, Machine Room, Components, Lift Well and Lift Pit.
Design Standards - Lifts Lobby, Lift Cars etc
Escalators and Conveyors- Installation and Planning Requirements
TEACHING METHODOLOGY:
Teaching methodology will be a combination of guest lectures from subject experts,
Lectures and Site Visits/ Visits to the project Sites and Studio Exercises. Teaching
shall also be w.r.t. provisions of NBC(National Building Code)
Exercises shall be clubbed with Design Studio Project
syllabus
Total Nine questions are to be set with Two Questions from Each Part
Students are required to attempt Five Questions with One Question from Each Part
REFERENCE BOOKS:
BARRY R, BUILDING SERVICES, John Wiley and Sons Ltd 1998.
National Building Code:-B I S
Sustainable Building Design Manual:- TERI
Jain V. K . , Handbook of Designing and installation of Services in Buildings, Khanna
publishers
Environmental Engineering:- N.N.Basak
B.ARCHITECTURE-V SEM.
STRUCTURE DESIGN -IV
(BACH-508)
Uni.Exam.Marks - 40
Duration of Exam. - 03 hrs.
INTENT:
To make students aware about the design methodology adopted and principles
involved in designing the structural elements used in the built environment with
focus on steel
CONTENTS
Unit-I-COMPRESSION MEMBER
Design of Compression members subjected to axial loading involving:
Effective length,
Radius of gyration,
Slenderness ratio,
Permissible Stresses
Design examples.
Unit-II--STEEL BEAM
Design of Steel Beams and Sections on the basis of:
Bending Stress,
Shear Check,
Deflection,
UDL
Concentrated Load.
Unit III --STEEL TRUSS
Design of Steel Truss Members for:
Given Loading;
Compression Factor,
Tensile Forces.
Unit IV--FOUNDATIONS
Design of Grillage Foundation for Isolated Steel Column Section for:
Bending Stresses,
Shear Check
Web Crippling Check,
Design examples.
Unit V---RIVETED/WELDED JOINTS
Riveted Connections
Different types of Rivets,
Type of Riveted Joints,
Failure of Riveted Joints,
Efficiency of Riveted Joint ,

Welded Connections
Different types of Welds,

Advantages/Disadvantage of Welded/ Riveted connections.
Teaching in the subject shall be with reference to the provisions of latest ISI code
Emphasis shall be on making students understand the principles and systems involved
in various topics
Ten questions are to be set with Two Question from each Part.
Students are required to attempt Five Questions with One Question from each part
REFERENCE BOOKS:
I S 800 CODE BOOK
STEEL STRUCTURE DESIGN by VAZIRANI
STEEL STRUCTURE DESIGN by JAIN
VI Semester Syllabus - 2012
B.ARCHITECTURE VI SEM.
ARCHITECTURAL DESIGN-VI
(BACH-601)
Duration of Exam. 12 hrs (Evaluation to be done through viva- voce by external examiner)
INTENT
To make students understand the principles and approach to the
designing
of
complexes in the context of urban design, environmental components and urban
services.
CONTENT
Design of Public Buildings with complex functional demands and technical inputs.
Nature of urban complexes, scale and other elements of urban design to be
incorporated.
TOPICS
The design program to include:
a) Auditorium, Cinemas, Theatres, Multiplex.
b) Specialized Laboratories and Housing
c) Study of an urban complex as a prototype so as to have a basic knowledge of various
aspects in planning with focus on urban activity, services and construction methods
along with social aspects, growth and change
Answer sheets should be retained at college level for the viva voce examination .
REFERENCE BOOKS :
1997.
B.ARCHITECTURE - VI SEM.
BUILDING CONSTRUCTION & MATERIALS-VI
(BACH-602)
Uni.Exam.Marks - 75
INTENT
The overall intent is to make students understand construction/detailing of work
associated with interior finishes and works.
TOPICS
UNIT-I
Complete working drawings of a residential building including Site plan, Floor plans,
Elevations, Sections, and Services showing Constructional details of Kitchen
Constructional details of Toilets
Built in Furniture (Cup boards etc.)
Staircase
Joinery details
UNIT-II
Temporary construction work
Shoring
Underpinning
Scaffolding
Site visits to construction sites
Preparing Construction plates on above topics.
Two questions are to be set from each Unit.
Students are required to attempt Three Questions with One question from each Unit.
REFERENCES BOOKS:


Scientific, 1999
CHUDLEY R.,CONSTRUCTION TECHNOLOGY (VOL. 1-4) Longmans, UK 1981
New York 2003.
HISTORY OF ARCHITECTURE-IV
(BACH-603)
Uni.Exam.Marks - 60
INTENT
To make students understand how different architectural typologies/ solutions were
evolved (in successive historical periods) within the limitations imposed by prevalent
social and religious factors, building materials, climate of particular region/
topography, complex structural problems and the limited technology available at the
time.
UNIT-I
Pre Industrial and Neo Classical
Industrial period
Modern Architecture up to Second World War.
UNIT-II
Indo Colonial Architecture of New Delhi, Kolkata, Mumbai, Chennai, and Lucknow.
Havellis and Palaces of Rajasthan
Religious and institutional buildings of Sikh Architecture.
For each of the period given in syllabus, stress is to be laid on making students
understand the Architectural Characters/ features , building evolution and form with
One compulsory question of short answer type of 10 Marks is to be set from the entire
syllabus
Students shall attempt total of Five Questions with Two questions from each unit
REFERENCE BOOKS:
Brown P, History of Architecture Buddhist and Indian, Taraporevala and sons, Bombay,
1983.
Grover Satish, Islamic Architecture in India, CBS Publishers & Distributors 2010
Press, 1986.
A History of Architecture:- James Fergusan, John Willey
Fergusan James, Willey John, History of Indian & Eastern Architecture, Dodd, Mead
& company 1899
Tagdell Christopher, The History of Architecture in India, Phaidon Press,1994
Curtis William Jr., Modern Architecture Since 1900, Phaidon Press, New York: 1996.
B.ARCHIECTURE-VI SEM.
INTERIOR DESIGN-VI
(BACH-604)
Uni.Exam.Marks - 60
INTENT
To introduce the students to the basic principles of Interior Design in the context of
built environment.
CONTENT
UNIT-I
Objectives, Purpose, Role and Importance of Interior Design
Principles of Interior Design and their application in the context of buildings.
Aesthetic Order, functional Value and Psychological impact of various elements of
Interior Design.
Application of Colour, Texture, Landscaping, Artificial and Natural Lighting in the
Building interiors
UNIT -II
Elements of Interior Design , Role in interiors
Furniture, Furnishings, Fabrics, Murals, Paintings, Sculpture, Lighting Fixtures, Floor
coverings, Wall coverings and related materials.
Study Report of an existing DESIGN PROJECT
Space organization in interiors--presentation of the complete interior scheme of a
given projects such as Library, Public Halls, Conference Room, Commercial
buildings etc.
Teaching in the subject shall be a combination of lectures by subject Experts, Site
visits and Schematic layout Exercises
syllabus
Students should attempt total five questions Two questions from each part besides
compulsory question.
REFERENCE BOOKS:
Zenkin -Human Dimensions and Interior Design Interior Design and Space Planning-Time Saver Standard-McGraw Hill
Interior Design- Indoor and outdoor Landscaping-Archi World Company
Jain Shashi, Creative Interior Design of Enclosed Spaces, Management Publishers
Company
De Chaira/ Panero, Time Saver Standard for Interior Design Space Planning, McGraw
Hills
BUILDING SERVICES-III
(BACH-605)
Uni.Exam.Marks - 60
INTENT
To make students learn and understand basic principles governing design/provision
of HVAC, Building Management System and Acoustics within the buildings.
CONTENTS
UNIT-1: AIR CONDITIONING
Air conditioning--Role, Importance and Principles governing Air conditioning
Refrigeration Cycle, Air cycle, Cooling Load
Methods of Cooling and Heating-Evaporative Cooling etc
Types of Air Conditioning Systems-Unit and Central
Standards and location of various parts- Plant, Ductwork, Fan ,Filters, Outlets,
Dampers etc
Natural and Artificial Ventilation
UNIT-II: ACOUSTICS
Acoustics- Introduction, Role, Importance, Concept, Basic Principles of Design,
Sound- Basic principles governing transmission, reverberation, absorption, reflection
etc.
Acoustics-Materials- application, advantages and disadvantages
Acoustics in Buildings- Design considerations for various buildings including Class
Room, Studio, Lecture Theatre, Auditorium, OAT etc
UNIT-III: BUILDING AUTOMATION/BUILDING MANAGEMENT SYSTEM
Building Automation-Introduction, Relevance, Scope and Importance
Building Management System- Functions, Applicability to different services
Building Management System- Limitations, Advantages, Disadvantages components
and integration in buildings
Intelligent Buildings- Concept, applicability and limitations
Teaching in the subject shall be a combination of lectures by subject Experts, Site
visits and Schematic layout exercises.
One compulsory Question of short answer type 5 question of 2 marks (10 Marks) each
are to be set from the entire syllabus
Total Eight Questions are to be set from entire syllabus including compulsory
Question
Students should attempt total five Questions with minimum one Question from each
unit.
REFERENCE BOOKS:.
BARRY R, BUILDING SERVICES, John Wiley and Sons Ltd 1998.
Edward - Lighting design.
Stein, Electrical and Mechanical Services, John Wiley & Sons, 1997.
B.ARCHITECTURE VI- SEM.

ESTIMATING, COSTING & SPECIFICATIONS-I
(BACH-606)
Uni.Exam.Marks - 60
INTENT:
To make students understand the factors affecting cost of buildings and methods of
preparing estimates of architectural projects
.
CONTENT:
Scope of the subject limited to preparing detailed estimates and cost of two-storeyed
residential buildings in masonry and reinforced cement concrete.
TOPICS:
UNIT-I :ESTIMATING AND COSTING
Estimate & Types of Estimate.
Methods of Estimates--Approximate & detailed methods of Estimate including Plinth
area method, Carpet/Floor Area method ,Cubic Content method.
Preparing estimates of quantities of materials for various items of work e.g.
earthwork, brickwork, flooring, roofing etc- units of measurements and payments.
Analysis of rates of material and labour required for various items of work.
Bill of Quantities-Methods of taking out the quantities of R.C.C. construction .
Case study/practical exercise in preparing a detailed estimate of a two storeyed
residential building with respect to the quantities of material and labour required as
well as analysis of rates for material and labour.
UNIT-II :SPECFICATIONS
Introduction , importance, Role, Functions and Types of Specifications

Detailed Specifications for various basic building materials.
Studio exercise related to specifications for small building project, standard P.W.D.
specifications.
Writing specifications for civil works as: Damp Proof Course
Brick Masonry
Concreting
Flooring
Plastering & Pointing
Timber Doors & Windows
Steel Doors & Windows
Painting and Varnishing
Services, Sanitary Fixtures & Electric Wiring
Teaching in the subject shall be a combination of lectures by subject Experts, class
room exercises, site visits.

syllabus
In addition,Eight questions are to be set with Four questions from each unit
Students should attempt a total of Five questions with Two questions from each unit
besides the compulsory question
REFERENCE BOOKS:
P.W.D. Specifications
Dutta B N, Estimating & Costing in Civil Engineering
Agarwal A./ Upadhay A.K ,Civil Estimating, Costing and Valuation, S. K. Kataria
Sons, 01-Jan-2009
Nanavati Roshan Estimating, Costing and Valuation, U.B.S. Publishers, Distributers
PVT.Ltd. New Delhi.
B. ARCHITECTURE -VI SEM.

ARCHITECTURAL LEGISLATION-I
(BACH-607)
Uni.Exam.Marks - 60
Sessional Marks
- 40
Duration of Exam. - 3 hrs
INTENT
To make students familiar with the role and importance of Legal Framework in
Designing the Built Environment and Promoting orderly growth of Human
Settlements
CONTENTS
UNIT- I
Need, Role and Importance of Legislation in the Building Industry
Building Bye- laws-- Contents and Scope
Study of Building Bye- laws Chandigarh- Intent and Contents
Study of Building Bye- laws ,PUDA- Intent and Contents
Study of Municipal Building Bye- laws - Intent and Contents
Architectural Controls- Need, Typology, Contents and Applicability
Introduction to various Acts- Periphery Control, Property Regulation Act, Regional
and Town Planning Act, Chandigarh Capital Act, Heritage Conservation Act.
UNIT- II
Requirements of Submission of Documents/ Drawings for approval of Building Plans
in Chandigarh, PUDA, Local Bodies
Completion/ Occupation Certificate for Buildings- Need and Procedure
Preservation and Conservation of Heritage Buildings, Heritage Regulations
National Building Code, - Study of Important Definitions , Types of Buildings,
Protection of Industrial/ Multi-Storeyed Buildings against Fire etc w.r.t. National
Building Code
Disability Act
Total 8 Questions to be set from both parts.
5 Questions will be set from Part- I and 3 Questions from Part-II.
Student will be required to answer 5 Questions, 3 Questions from Part- I and 2
Questions from Part II.
Attempt will be made to cover the entire syllabus.
REFERENCE BOOKS: Building Bye Laws- Chandigarh Administration
Building Bye Laws- PUDA
Municipal Building Bye Laws
Town Planning Rangwala
B.ARCHITECTURE - VI SEM.
STRUCTURE DESIGN PROJECT-V
(BACH-608)
Uni.Exam.Marks - 50 (Only External viva-voice)
INTENT
To create skill among students to apply the knowledge gained regarding structural
design in an applied project and to make buildings safe against natural/ manmade
disasters
CONTENTS
UNIT - I
Detailed Structural Design & Drawings of a Public /Residential Building, ( R.C.C.
framestructure) with emphasis laid on practical design considerations.
UNIT-II
Earth quake Resistant Design.
Introduction to Codal provision, IS- 4326 and IS- 1893 for Earth quake Resistant
Design of Buildings.
Earth quake Resistant provisions for Brick Masonry& R.C.C. Buildings.
Student shall prepare report consisting of Detailed Structure Design of a building
considering all safety factors including fire , earthquake, cyclone, floods, etc.
Report to be prepared in bound form with drawings attached.
REFERENCE BOOKS
IS -456 CODE BOOK
I S -800 CODE BOOK
IS- 4326 CODE BOOK
IS- 1893 CODE BOOK
Rani Vazi, RCC, Khanna Publishers New Delhi. 2000
Jain A.K. , RCC, Lakshmi Publication (P) LTD
VII Semester Syllabus- 2012
B.ARCHITECTURE - VII SEM.

PRACTICAL TRAINING PROGRAMME
(BACH-701)
Uni.Exam.Marks
Sessional Marks
Duration
- 150
- 350
- 6 Months
INTENT:
To make student learn the intricacies of Architectural Profession by joining and
working with practicing Architects/Architectural firms for one complete semester.
Practical Training Manual:
The total marks shall be suitably apportioned to assess on regular basis the monthly
reports, office work and work done outside office hours.
Students are required to send/ submit monthly reports of work done by them in the
office in which they are working according to a prescribed schedule. These reports
shall be assessed/marked regularly by the Practical Training Coordinator(PTC).
On the conclusion of training, the work done by the student shall be examined and
evaluated through a viva- voce to be conducted jointly by the Director/ Principal/HOD,
PTC and one External Examiner ,who will be appointed by the University.
Work to be done by the student:
During training ,students are required to do two distinct types of work in order to make
optimum utilization of the period of training.
a) Work to be done during office hours:
The work to be done during office hours will include:
Drafting, Tracing, Sketch designs, Presentation drawing, Perspectives, Models,
documentation etc.
Working Drawing and details
b) Work to be done during extra - office hours:
The work to be done during extra - office hours will include:
Preparing a study report on Building design, Analysis incorporating Site visits,
recording Observations etc.
DISTRIBUTION OF MARKS
University (External) Marks

- 150
(a) Univ. Viva Voce
- 100
(to be conducted by the external expert appointed by University)
c) Marks awarded by the employer -50
( to be sent in original to the University)
Internal Marks
- 350
(to be sent by PTC in the format given below)
Roll
No.
Joining Report
Marks
20
Monthly Report
Marks
80
Building Study
Report Marks
125
Seminar Presentation Marks

125
NOTE: Based on the above guidelines a detailed program shall be drawn each year by the
PTC, which shall be approved by the Director/Principal before it is implemented. The
intention will be to update the program on regular basis, incorporating new details, with focus
on making continuous qualitative improvement of the practical training.
VIII Semester Syllabus- 2012
B.ARCHITECTURE - VIII SEM.

ARCHITECTURAL DESIGN-VII
(BACH-801)
Uni.Exam.Marks
Sessional Marks
- 125 (No exam, only viva-voce by external jury)

- 125
INTENT:
To make students understand the principles and implications of advance and complex
design problems with focus on planning, landscaping, energy conservation and services
considering zoning regulations.
CONTENTS
The design programme includes:
Planning and Designing of large Complexes related to Health care and
Academic Institutions-Hospitals cum Medical Colleges etc.
Planning and Designing of Traffic Nodes-Bus Terminal, Railway Station,
Airport.
Light Industrial Buildings involving manufacturing ,display etc
NOTE:
Minimum Two projects should be done by the student. The Projects selected should
be based on realistic contexts.
The design submitted shall include complete project drawings, perspective, models
and details
Teaching focus will be to promote design concept based on Site, Landscaping,
Climate, Energy, Services ,Safety and compliance with Building Regulations etc
External marks shall be awarded through viva- voce conducted by the External Jury
appointed by the University of the work done by the student during the semester .
REFERENCE BOOKS :
1997.

BUILDING CONSTRUCTION& MATERIALS - VII
(BACH-802)
Uni.Exam.Marks
Sessional Marks
Duration of Exam.
INTENT
- 75
- 75
- 04 hrs.
To make students aware and familiar with special constructional
details involving finishing and furnishing, extension and expansion
joints and basements with details.
TOPICS
UNIT-I
Study , design and details of various types of counters and

Interior finishes, lighting for Banks, Hotels, Offices, Shops,
Railway station and other public places.
UNIT-II
Materials and Construction details of wall Panelling, False Ceiling

including Thermal and Acoustics treatments.
UNIT-III
Extension and Expansion joints in R.C.C.

Construction of Basement including design, detailing, treatment
for water/damp proofing etc.
Study of Prefabricated structures.
Advantages and disadvantages of on-site and off- site prefabrication.
Pre-fabricated components, involving simple details in
prefabrication.
Teaching methodology shall be a combination of:
Field visits to study the interiors and details of the buildings.
Preparing Construction plates.
Market study of the products available under different trade
names with details of their manufacture, specification and
performance.
Site Visits and details of prefabricated structures
Minimum Six questions are to be set from the entire syllabus
with Two Questions from each unit.. Student would be required to
attempt three questions with minimum one from each unit.
Question paper is to be set covering whole of the syllabus by making
parts and mixing the topics.
REFERENCE BOOKS:
Scientific, 1999
1981
New York 2003

URBAN DESIGN-I
(BACH-803)
Uni.Exam.Marks
- 60
Sessional Marks
- 40
Duration of Exam - 3 hrs.
INTENT
To create awareness and promote understanding of the nature, role and importance of
Urban Design in the making of quality Built Environment and Human Settlements
CONTENTS
UNIT- I
Introduction, Role, Scope and Importance of Urban Design
Distinction between Urban Design, Architecture and Town Planning
Elements of Urban Design- Pattern, Grains, Texture, Density etc, their role and
importance.
Determinants of Urban Form Landform, Climate, Symbolism, Activity Pattern,
Socio-cultural Factors, Materials, Techniques etc. and their role and importance.
Imagability- Elements their role and importance including Paths, Nodes, Landmarks
,Edges, Districts etc
Designing Cities- Role and importance of Communication, Utilities, Landscape
Features, Transport, Visual Expression, Size, Contrast, Urban Character etc.
Shapes of the Cities- Comparative advantages and Disadvantages
UNIT- II
Urban Spaces-Typology including Street, Square, Precinct, Piazza, Mall etc
Urban Spaces- Elements, identification, characteristics and role in shaping the spaces
Changing Role ,Importance and Pattern of Urban Spaces in historical perspectiveGreek, Romans, Medieval and Contemporary cities.
Design Principles involving Scale and Enclosures
Development Controls- Role and Importance in Urban Design.
Urban Design study of selected Capital Cities- Chandigarh, Delhi and Jaipur
Legal and Institutional framework for Urban Design including Delhi Urban Art
Commission- Objectives, Constitution, Role, Importance, Impact etc
Emphasis shall be laid on understanding of evolution of Cities and Buildings .
Continuous evaluation shall be made of students work based on various assignments
and sketching.
Teaching in the subject will be a combination of Expert lectures, specific case studies
and field visits of historical and contemporary cities.
Students would be required to do, in groups, a case study of a city to make them
understand the various aspects of urban design . The study will be illustrated with
maps, visuals, photographs and sketches.

One compulsory question of short answer type containing 5 questions of 2 marks
each (10 Marks) is to be set from the entire syllabus (4 Marks and 6 marks from unit
I and Unit II respectively)
In addition, Four questions are to be set from each UNIT.
Students are required to attempt five questions including compulsory question with
two questions from each UNIT.
topics.
REFERENCE BOOKS:
Spreiregan Paul D, Urban Design: The Architecture of Towns and Cities.
Gallion Arthur B, The Urban Pattern: City Planning and Design.
Gupta S.P. The Chandigarh: An Overview
Agarwala S.C. Architecture and Town Planning
Institute of Town Planner (India) Readers Volume

HOUSING-I
(BACH-804)
Uni.Exam.Marks
- 60
Sessional Marks
- 40
INTENT
To make students understand the role, importance and issues related to housing.
CONTENTS
UNIT I
Role and importance of Housing
Status of Housing in India
Housing need, demand and concept of affordability.
Housing typologies including plotted and flatted development
Housing surveys including methods of conducting surveys
Housing- problems and solutions in India
Housing for the Poor
Slums -Origin, Growth, Problems and Solutions
Role of Public and Private Sectors in Housing.
UNIT II
National Housing and Habitat Policy 2007
Institutional framework for Housing Finance
Institutional framework for Housing Delivery
Factors affecting Cost of Housing
Basic Housing Norms and Standards for EWS, LIG and MIG
Five Questions will be set from Part- I and Three Questions from Part-II.
Student will be required to answer Five Questions, Three Questions from Part- I and
Two Questions from Part II.
REFERENCE BOOKS
National Housing and Habitat Policy 2007
Rangwala S C, Town Planning
National Building Code, 2005
Lal A K Hand book of Low Cost of Housing , New Age Publishers
Readers Volume on Housing Institute of Town Planners, India
Report of Govt. of India on Housing Shortage
Journal of IIA, April 2013

HIGH RISE BUILDINGS-I
(BACH-805 )
Uni.Exam.Marks
- 60
Sessional Marks
- 40
Duration of Exam. - 3 hrs.
INTENT
To make students aware and understand the context of planning, designing and
construction of High Rise buildings and their role and importance in shaping the
Human Settlements and Urban Form in the Modern Context.
CONTENTS
UNIT I
High Rise Buildings- Introduction, Historical perspective, Origin, Definition, Role,
Importance , Limitations, Advantages and Disadvantages
Planning /Designing of High Rise Building
Construction of High Rise Buildings
Building Technologies used in the Construction
Building Materials used in the Construction
UNIT II
Study of Building Services in the High Rise Buildings
Fire Safety and Structural safety of High Rise Buildings
Study of Legal Framework governing the High Rise Buildings
Study of National Building Code, 2005
Study of famous High Rise Buildings-Burj Khalifa, Sears Towers, Empire State
Building, World Trade Centre, Imperial Towers and Orchid Woods Mumbai .
Teaching in the subject will be a combination of invited lectures , visit to MultiStoryed/ High Rise Buildings and library studies/power point presentations of High
Rise Buildings mentioned above.
One compulsory question of short answer type containing Five questions of 2 marks
each (10 Marks) is to be set from the entire syllabus (4 Marks and 6 marks)
In addition , Four questions are to be set from Each Unit .
Students are required to attempt Five questions including compulsory question with
minimum One question from each UNIT.
topic

ARCHITERCTURAL CONSERVATION-I
(BACH-806-E/L)
Uni.Exam.Marks
Sessional Marks
Duration of Exam
- 60
- 40
- 3 hrs.
INTENT
To promote understanding and importance of the Historical buildings and their
preservation and conservation.
CONTENTS
UNIT-1
Heritage- Introduction, Definition, Role, Importance, Scope and Limitations
Study of basic historical styles in Indian Architecture.
Study of ornamentation and detailing in historical buildings in various styles.
Study of construction methods and structural analysis of various historical building

styles e.g. Arches Domes, Vaults and Shikharas etc.
UNIT-II
Study of finishes in historical buildings.
Effects of weathering/ pollution on historical buildings.
Study of landscaping style/ Plantation around historical buildings.
Knowledge of plantation/ water features in Mughal Garden and Hindu Temples.

UNIT-III
Methods of studying and documenting historical monuments in the context of

guidelines issued by UNESCO, INTACH.
Methods of saving monuments from vandalism.
Study of existing Legal framework to protect Heritage and its limitations
Institutional framework to protect Heritage
Emphasis shall be laid on understanding of Architectural Conservation. Continuous
evaluation shall be made of students work based on various assignments and
sketching.
and field visits of historical and contemporary buildings/complexes.
Students would be required to do, in groups, a case study of a historical building to
make them understand the various aspects of Architectural Conservation. The study
will be illustrated with maps, visuals, photographs and sketches.
One compulsory question of short answer type containing 5 questions of 2 marks each
(10 Marks) is to be set from the entire syllabus.
In addition, the examiner is to set Seven questions with minimum Two from each
unit. Student would be required to attempt Five questions with minimum One from
each unit including compulsory question
Questions paper is to be set covering whole of the syllabus by making parts and mixing
the topics.
REFERENCE BOOKS :
Oliver Paul, Encyclopaedia of Vernacular Architecture of world
Thakkar Jay, Matra: Ways of measuring Built form of Himachal Pradesh, CEPT
University.

SUSTAINABLE ARCHITECTURE-I
(BACH-807-E/L)
Uni. Exam. Marks
Sessional Marks
Duration of Exam.
- 60
- 40
- 03 hrs.
INTENT
To educate and make students aware about sustainability issues, need and importance
of promoting sustainable Architecture.
UNIT-I
Sustainable Development- Introduction, definitions, objectives and scope
Man and Environment- Introduction, issues and options
Human Settlements- Planning, Growth, Development, Problems
Global warming Introduction, Causes, Effects and Remedies, Carbon Credits.
Architect-Role in Sustainable Development.

Energy - Role, Importance in buildings
Sources of Energy- Non- renewable and renewable Role and
Importance
Sustainable Materials Production and use

Quality of indoor/outdoor environment
UNIT-II
Sustainable Design Concept, Objectives, Principles, Approach to Sustainable
design
Built Environment- Sustainable Construction, Ecological Buildings, Green Building
Building Rating System
ECBC Code
Sustainability Assessment - LEED, Life Cycle Assessment, GRIHA
Climate responsive and Solar Passive Strategies in Indian Climates
Recycling/Reuse
Indias approach to sustainable Development.
Emphasis shall be laid on understanding of Sustainable Development.

and field visits to sustainable buildings/complexes.

(10 Marks) is to be set from the entire syllabus .
In addition, the examiner is to set Seven questions with minimum Three Questions
from each unit. Student would be required to attempt Five questions with minimum
Two from each unit including compulsory question
REFERENCE BOOKS:
New York 1983.
York - 1981

BUILDING MAINTENANCE - I
(BACH-808-E/L)
Uni.Exam.Marks
- 60
Sessional Marks
- 40
INTENT
To make student understand the Role and importance of the building maintenance in
built environment.
TOPICS
UNIT-I
Maintenance- Introduction, Need, Scope, Importance& Role of an Architect.
Maintenance-Economic and Social significance
Maintenance - Problems and issues related to materials, design and detailing.
Climate- Effect on the life cycle of buildings.
Deterioration and Decay of buildings- Typology, Reasons, Prevention
Deterioration and Decay- Causes, Effect, Remedies
UNIT-II
Defects in Buildings-Efflorescence, Dampness, Settlement, Cracks, Corrosion etc causes, effects, preventive and remedy
Retrofitting of Buildings for Structural safety
Building service and maintenance -- water supply, sewerage, and Sanitation system.
Case study of any existing building
Teaching in the subject will be a combination of Expert lectures, Specific case studies
and field visits to buildings in deteriorating conditions.
Lectures from representatives of industry and visits to the industrial units involved in
producing materials to make buildings safe will be made integral part of teaching
(10 Marks) is to be set from the entire syllabus.
In addition, the examiner is to set Seven questions with minimum Three from each
unit. Student would be required to attempt Five questions with minimum One from
each unit including compulsory question
Questions paper is to be set covering whole of the syllabus by making parts and mixing
the topics.
B.ARCHITECTURE-IX SEMESTER
B.ARCHITECTURE -IX SEM.

ARCHITECTURAL DESIGN-VIII
(BACH-901)
Uni.Exam.Marks
Sessional Marks

- 125
INTENT
To make students aware and understand the complexity and methodology to handle
large projects through group design, involving urban environment and prevailing
building regulations.
TOPICS
The design problems will include Public Buildings with diverse activities involving:
Higher Order of Office/Commercial complex, -City Centre, District Centre, Large
Exhibition Complexes, Convention Centre Multiplexes
Campus designing - University, Professional Institutes, Integrated Campus etc.
Capital Complex-Secretariat, High Court, Assembly
NOTE
All buildings should have accessibility to the physically challenged persons
Minimum Two projects should be done by the student. The Projects selected should
be based on realistic contexts.
The design submitted shall include complete project drawings, perspective, models
and details
Teaching focus will be to promote design concept based on Site, Urban design,
Landscaping, Traffic and Transportation, Climate, Energy, Services ,Safety and
compliance with Building Regulations etc
External marks shall be awarded through viva- voce conducted by the External Jury
appointed by the University of the work done by the student during the semester.
REFERENCES BOOKS:
1997.

BUILDING CONSTRUCTION & MATERIALS-VIII
(BACH-902)
Uni.Exam.Marks
Sessional Marks
Duration of Exam.
- 75
- 75
- 4 hrs.
INTENT
To make students aware and learn about advance construction techniques and
preparing project drawings.
CONTENTS:
UNIT-I
Complete Set of Working Drawing of a major design project of 8th semester
including Site plan , Foundation plans, Elevations and Sections .
Commercial Kitchen- Study, designing and working drawing
Introduction to Pre- stressing and Post- Tensioning
UNIT-II
Materials used in building faade with construction details.
Modular Construction- Objectives, basic principles, planning and structural modules.
Mass production, Transportation, Storage and handling of construction materials.
Curtain Walls- Role, functions, materials, principles and details
Elevators, Escalators, Travellators, Refuse Chutes- The study and details of
Construction.
Teaching in the subject shall be a combination of field/ site visits, visit to industrial
units involved in mass production and preparing construction plates on above topics.
Three Questions will be set from each unit
Student will be required to answer Three questions with minimum One question from
each part
REFERENCE BOOKS:
a)
Building Materials
Scientific, 1999
1981
New York 2003
Prefabrications Manuals of Kirbi and other
Manufactures

TOWN PLANNING-I
(BACH-903)
Uni.Exam.Marks
- 60
Sessional Marks
- 40
Duration of Exam. - 3 hrs
INTENT
To make students understand the role and importance of Town Planning in the
evolution of Human Settlements and Urban Forms in the Historical and Modern
Context.
CONTENTS
UNIT-I
Introduction, Role, Importance and Scope of Town Planning
Planning Principals of Human Settlement in Nile Valley, Greek and Roman
Periods.
Town Planning in India- Vedic period, Indus Valley, Islamic, Medieval and
Colonial Period.
Classification of Human Settlements based on Road Pattern, Form, Use, Scale/
Population etc.
UNIT- II
Master Plan Objectives, Role, Importance and Methodology.
Regional Plan - Objectives, Role, Importance and Methodology
Planning Concepts- Garden City, Linear City, Industrial City and Sustainable City
and Neighborhood
Existing Towns and Cities in India- Problems, Remedies etc.
Urbanization Causes, Pattern and Effect in India.
Study of New Towns in India Chandigarh, New Delhi & Gandhi Nagar.
Town Planning in Punjab
Role of Development Authorities in Urban Development.
Four Questions will be set from Unit- I and Five Questions from Unit-II
Student will be required to answer Five Questions, Two Questions from Unit- I and
Three Questions from UnitII.
Attempt will be made to cover the Entire Syllabus.
REFERENCE BOOKS:
UDPFI Guidelines Ministry of Urban Development
Rangwala S C, Town Planning
Spreiregan Paul D, Urban Design: The Architecture of Towns and Cities.
Gallion Arthur B, The Urban Pattern: City Planning and Design.
Gupta S.P. The Chandigarh: An Overview
Agarwala S.C. Architecture and Town Planning
Institute of Town Planner (India) Readers Volum
Report of National Commission on Urbanization Govt. of India.
Census of India 2001 and 2011

BUILDING ECONOMICS-I
(BACH-904)
Uni.Exam.Marks
- 60
Sessional Marks
- 40
INTENT
To create awareness, impart knowledge and promote understanding of the role and
importance of Economy and Cost effectiveness in the buildings to promote
sustainability .
CONTENTS
UNIT I
Building Economics-Introduction, Definition, Role, Scope, Importance and
Principles of building economics.
Cost of Building- Components, Impact of various components ,Types of costs
including Construction Cost, Maintenance cost, Operational Cost etc
Cost Management- Aims, Objectives, Need , Principles, Procedure, Cost Analysis.
Analysis of Comparative Economics of Low Rise and High Rise Buildings
UNIT II
Technology Role, Importance, Use, Up-gradation of local Technologies to make
buildings cost- effective.
Materials- Role, Importance, Innovative building materials ,up-gradation of local
materials, Comparative analysis of available building materials
Construction Techniques- Study of Innovative Building Techniques for cost
reduction with comparative merits and Demerits
Introduction, Role and Importance of Modular construction, Pre- Engineered
Buildings, Mass Production, Standardization etc in cost effectiveness
Cost Reduction -through Planning, Designing and Specification of buildings
involving Space Optimization and Structural Innovations
Space Norms- Role and importance of Space Norms for Cost reduction, Principles
for defining Space Norms, Norms defined in NBC.
Teaching in the subject will be a combination of Expert lectures, Specific case studies
and field visits to Low Cost buildings
Lectures from representatives of industry and visits to the industrial units involved in
producing building materials will be made integral part of teaching
Students would also be encouraged to attend building material exhibitions etc.

In addition, Four questions are to be set from each UNIT.
two questions from each UNIT.
topics.
REFERENCE BOOKS:
Sustainable Buildings- Design Manual Vol- I&II by TERI
National Building Code, 2005
Lal A K Hand book of Low Cost of Housing , New Age Publishers
Readers Volume on Housing Institute of Town Planners, India
Report of Govt. of India on Housing Shortage
Journal of IIA, April 2013.

HILL ARCHITECTURE-1 ( E/L)
(BACH-905)
Uni.Exam.Marks
Sessional Marks
Duration of Exam
- 60
- 40
- 3 hrs.
INTENT
To make students aware and understand the specific requirements of art and science
of designing buildings in hill areas based on climate, topography, local materials,
social factors etc.
CONTENTS
UNIT-I
Hill Architecture- Introduction, historical perspective, specific attributes/unique
features etc.
Traditional Hill Architecture of Medieval Europe- overview , specific features,
building materials, building technologies
Hill Settlements-Approach, overview ,specific features of planning and designing in
different climatic regions of the world
Disasters in Hill Areas: - Issues and Options.
UNIT- II
Hill Architecture in India- Growth, Development, Character and unique features
Building Typologies- Study of various types of traditional buildings in different Hill
Regions of India with their unique features
Factors effecting design of buildings in Hill Areas- Topography, Climate,
Vegetation, Materials, Technology, Sustainability Social factors etc- their role and
importance
Building Technologies- Study of different technologies for construction of
Foundations, Walls. Floors, Roof etc in Hill Regions of India
Study of Traditional Hill Settlements in India with their planning features
Hill Architecture in Post- independence Period- Approach, Pattern, Typical

features, Materials, Technologies etc and their impact on ecology, environment
and Sustainability of Hill Areas
Teaching in the subject will be a combination of Expert lectures from Architects
practicing/ having experience in the Hill areas, visit to any nearby hill settlement and
library studies of different hill regions of India and Europe.
In addition, Three questions are to be set from UNIT 1 and Four questions are to be
set from UNIT II.
topics.
REFERENCE BOOKS:
University.

VERNACULAR ARCHITECTURE -I
(BACH-906 E/L)
Uni.Exam.Marks
- 60
Sessional Marks
- 40
INTENT
To make students understand and appreciate the elements , techniques and factors
which go into the making of vernacular architecture as distinct from other styles of
architecture
CONTENT
UNIT-I
Vernacular Architecture- Meaning, Role, Importance & basic Theories.
Determinants of Vernacular Architecture- Role and importance of social, cultural,
political, economic , climatic, technological factors
UNIT-II
Vernacular Architecture-Role and importance of Materials & Technology
Vernacular Architecture and Disaster Management.
UNIT-III
Illustrated Case studies - Vernacular settlements/Building typology from various
regions in India and abroad.
Study of Vernacular Architecture of various Regions of Punjab with their
distinct features/ elements .
Teaching in the subject will be a combination of Expert lectures, visits to historic
buildings representing peculiar culture, technology and architectural elements, visits
to museums and archives with library studies of different regions of Punjab and
India.
each (10 Marks) is to be set from the entire syllabus
In addition,three questions are to be set from UNIT 1&III and Two questions are to be
set from UNIT II.
topics.
REFERENCE BOOKS:
University.

TRAFFIC AND TRANSPORTATION-I
(BACH-907-E/L)
Uni.Exam.Marks
Sessional Marks
Duration of Exam
- 60
- 40
- 3 hrs.
INTENT
To create awareness and impart knowledge about Traffic and Transportation and
related issues.
CONTENTS
UNIT-I
Traffic and Transportation- Introduction, Need, Role and Importance
Transport Systems-Typologies, basic character and comparative advantages and
disadvantages.
Role of Bicycle as a preferred mode of transport including planning for Bi-cycles
Inter and Intra city Traffic- Nature, characteristics, problems and solutions
Accidents- Causes, effects, and remedies to promote Road Safety
Problems and Issues related to Traffic and Transportation in the Indian cities and
Core areas with options to meet these challenges.
UNIT-II
Traffic Control Devices- Typology, Application and comparative Merits and
Demerits
Signage- Introduction, Objectives, Function and classification
Design of Road Intersections, Rotaries, Over bridges, Underpasses,
Flyovers with reference to a well designed city like Chandigarh.
Roads- Hierarchy, Classification, Capacity, Road Cross-sections
Mass Transportation/ Public Transport-Concept, Characteristic, Mode,
Advantages and disadvantages
Surveys-Objectives, Need, Importance ,Types and Methodologies for conducting
Traffic Surveys .
Parking- Introduction, Types, Requirement, Problems and Solutions.
National Transport Policy
Traffic Management and Land use Planning
Teaching in the subject will be a combination of Expert lectures and visits to areas of
high traffic including City centre, Commercial areas, Wholesale Markets. Core Areas
and Major Road Network passing through the city. The visit will also include traffic
nodes like Bus Terminus, Railway Station, and Truck Terminus.
Students should be made to do a small traffic survey in a congested area.
Guidelines for Paper Setter
each (10 Marks) is to be set from the entire syllabus (4 Marks and 6 marks)
In addition , three questions are to be set from UNIT 1. Four questions are to be set
from Unit III
topics.
REFERENCE BOOKS:
Kadiyali, Traffic and Transportation
National Transport Policy
Agarwala S C, Architecture and Town Planning
Institute of Town Planner (India) Readers Volume
UDPFI Guidelines Ministry of Urban Development
National Building Code,2005

LANDSCAPE ARCHITECTURE-II
(BACH-908-E/L)
Uni.Exam.Marks
- 60
Sessional Marks
- 40
INTENT
To make students aware of the role and importance of landscape design in creating
sustainable built environment and in promoting quality of ecology and environment in
and around buildings.
CONTENTS
UNIT- I
Landscape Design- Introduction, process, nature, scope, relationship between Man
and Nature, Role and importance of Ecology
Relationship between Architecture and Landscaping
Landscape Design-Basic Elements, Role and Importance, Problems and Potentials-Earth, Rock, Water, Plants, Grass, Gravel, Vegetation etc
Recreation Spaces-Typology, Planning and Designing
Landscape Gardens- Historical perspective from earlier period to contemporary
designs
Arboriculture, Garden Furniture, Signage
UNIT- II
Site Analysis- Role, Importance, Contour/ Mapping in Landscape Design
Surveys- Purpose, Need ,Objectives, Role , Importance in Landscape Design
Process of Landscape Design including role of services ( Electrical and public health)
Formal and Informal Landscape
Study of eminent contemporary landscape design works/ projects
Teaching shall be imparted through a combination of lectures by subject experts,
visits to the historical gardens developed over the period, landscape projects of
repute, study of native and other trees etc
Continuous evaluation shall be made of students work based on assignments and
sketching.
syllabus
Students are required to attempt a total of Five questions.
REFERENCE BOOKS:
Reid Grant W, Landscape Graphics
Littlewood Michael, Landscape Detailing
Harris and Dines, Time Saver Standard for Landscape Architecture- Plants of India
Tony Russel & Catherine Cutler, Trees- An Illustrated Identifier and Encyclopedia
Simonds, Landscape Architecture

Laurie Michael, Introduction to Landscape Architecture
Watts Rajnish/Dhillon Harjit/Chhattar Singh, Trees of Chandigarh
Krishan Pradip, Trees of Delhi
Bose D K/ Sharma S P/ Chaudhaury B, Tropical garden plants in colors
Randhawa M S, Flowering Trees and Shrubs of India
Randhawa M S, Beautifying India
X Semester Syllabus- 2012
B.ARCHITECTURE X SEM.
ARCHITECTURAL DESIGN -IX (THESIS PROJECT)
(BACH-1001)
Uni.Exam.Marks
Sessional Marks
- 300
INTENT
To make student synthesis and use knowledge of various disciplines gained during
entire study in an architectural project of his choice.
CONTENT
A. Thesis project will comprise of the following:
An Illustrated Report- which will include the validity and scope of the chosen
project, methodology, prototype studies, site analysis, clients and architects briefs,
delineation of programme and design criteria.
A fully worked-out Design Proposal- including consideration of site planning
structures, services, and any other aspect/specific to the project.
B. Stages of Work:
The entire process of Thesis Design shall be divided into four distinct
involving:
stages
1. Approval of Project:
The intent of the thesis project as well as the criteria for selection of the
project will be introduced to the students around the 6th week of the previous
semester, i.e.9th Semester B.Arch.
Before the closing of the 9th Semester, students will be required to submit
brief write-up on three projects out of which one will be approved.
2. Rough Report:
Rough Report shall comprise of all analytical aspects of the project including
Synopsis, Library studies, Prototype studies, Site analysis, Delineation of
Building Program, etc.
3. Evolution of Design :
Shall be worked out in minimum of four stages.
4. Draft of Final Report:

Shall include Evolution of Design, Final Report, Drawings and Model, to be
evaluated through a University Examination- Through a visual presentation/
viva-voce.
NOTE
Students will be required to submit two identical copies of the final report
along with a soft copy, on a standard format prescribed in the thesis
programme issued by the Thesis Coordinator.
The report must also included A-3 size copies of all final drawings and at least
two photographs of the final model/models.
The original copy of the report, the final drawings and models will be returned
to the student after the declaration of the result. The photocopy along with the
soft copy of the report and drawings will be retained for reference in the
college library.
C. SCHEDULE OF SUBMISSIONS/EXAMINATION
(Note: Commencement of the semester will be considered as Zero week.)
Stages of work
1. Sessional Work
Time allocated
Max. Marks
(a) Rough report

(i) Synopsis
(ii) Preliminary Library studies
(iii) Site analysis, Prototypes/
Additional Library studies
(iv) Programme Formulation
6 weeks
1 week
2 weeks
2 weeks
100
20
20
30
1 week
30
(b) Evolution of Design

(i) Design Criteria and Concept
(ii) Design Proposal Stage-1
(iii) Design Proposal Stage-2
(iv) Pre-final Design
5 weeks
150
25
25
50
50
(c) Draft Final Report with drawings.

5 week
(Incorporating improvements suggested in Rough Report,
Design Criteria and explanatory Sketches of Evolution of Design)
50
2. External Examination
250
SUBMISSION REQUIREMENTS
Students are required to submit the Final Report, all final drawings and models
in the standard format prescribed in the Thesis programme.
The students would also be required to submit an abstract of the thesis project.
Submission will be made one day before the date of examination.
EVALUATION METHODOLOGY:
The thesis studio will be conducted under the overall coordination of the
Thesis Coordinator. In addition, two members of the Visiting Faculty would
also be associated throughout the duration of the studio. Each student will be
assigned a Thesis Guide (from amongst the faculty) who will supervise the
progress of the students work on a regular basis.
Approval of the thesis project/topic will be done by the Principal/HOD, the

Thesis Coordinator and the concerned Thesis Guide.
All stages of Sessional work will be evaluated jointly by the Principal/HOD
and the entire studio team (Thesis Coordinator, Visiting Faculty and the
concerned Thesis Guide).
Marks awarded at each stage will be based on the average of those awarded by
all jury members.
Jury for the External Examination will comprise the Principal, Thesis
Coordinator and two External Examiners appointed by the P.T.U.
CONSTRUCTION MANAGEMENT -I
(BACH-1002)
Uni.Exam.Marks
- 60
Sessional Marks
- 40
INTENT
To make student understand and appreciate the role and importance of management in
building construction.
CONTENT
UNIT-I
Project Management- Concept, Background, Purpose, Aim, Objectives, Scope and
Significance
Traditional Management Systems- Advantages and limitations
Role of Architect in Construction/Project Management
Resources of Construction Industry.
Construction stages, Construction team, Equipment Management
UNIT-II
Project Management Techniques- Network ,CPM, PERT,
CPM Analysis- Critical Path, Float Computation Result Sheet etc
PERT- Introduction, Theory and Network analysis
Cost Time analysis in Network Planning.
Financing of Project, Depreciation and Break even Cost analysis
Cost Control- Budget, Accounting System, Problems
UNIT-III
Quality and Safety- Objectives, Issues, Organising for Quality and Safety
Stages of Inspection and Quality control
Planning of Temporary Services at the site.
Security of Materials and Manpower at building site.
Computer Application in Construction Management
Teaching in the subject will be a combination of Expert lectures and visits to
Construction /Project Sites and discussions with Project Managers
Students would be required to do a case study of a ongoing construction project
each (10 Marks) is to be set from the entire syllabus
In addition, seven more questions are to be set from other units with minimum two
minimum one question from each UNIT.
topics.
REFERENCE BOOKS:
Peurify R.L, Construction Planning, Equipment and Methods, International Book
Company
Srinath L S, PERT &CPM Principles and Applications , EWP Limited New Delhi
Bhatnagar S K, Network Analysis Techniques, Willey Eastern Limited
PROFESSIONAL PRACTICE
(BACH-1003)
Uni.Exam.Marks
- 60
Sessional Marks
- 40
INTENT
To make students understand and familiar with different aspects of Architectural
Practice and Professional Responsibilities.
CONTENT
UNIT- I
Architects Role, Functions, Social Obligations, Profession Activities,
Responsibilities etc.
Indian Architects Act 1972 Scope, Objective, Role & Importance in managing the
profession and professionals .
Council of Architecture Constitution, Role and Function, Registration of
Architects etc.
Indian Institute of Architects History, Objectives, Role and Function in promoting
Architectural profession and education.
UNIT- II
Architectural Practice Type of Practices, Setting office, Office Organization,
Management, Income Tax, Service Tax etc.
Architectural Competition Importance, Type, Procedure, Guidelines framed by
Council of Architectural to conduct competition, including Role of Board of
Assessors, Professional Adviser and Technical Advisers.
Code of Professional conduct
Conditions Governing the Appointment of Architects, Scale of Professional charges,
Execution of work and payment of fee.
UNIT- III
Duties, Responsibilities and Liabilities of Client, Architect, Contractor and their
mutual relationship.
Tenders- Type, Process, Scrutiny and Selection of Contractor, Pre Qualification and
Registration of Contractor.
Concept of Contract.
Copy Right Act as Applicable to Architectural work.
Complaints Procedure for lodging complaints, and their Resolution based on Indian
Architects Act 1972
Valuation - Purpose, Objective, Types and Method of valuation.
Arbitration and Reconciliation Act.
Teaching in the subject will be a combination of Expert lectures from Architects
working in the profession, visits to the offices and discussions with reputed
Architects.
Students should be encouraged to attend professional meets organized by the

professional bodies including IIA, COA, IOE etc.

In addition,three questions are to be set from UNIT 1 & II. Two question are to be set
from Unit III
topics.
REFERENCE BOOKS:
Indian Institute of Architects Hand Book IIA
The Indian Architects Act, 1972.
Council of Architecture Hand Book of Professional Documents 2007.
Indian Arbitration Act.
Chakraborty M, Estimating, Costing & Specification and Valuation in Civil
Engineering and Service Tax Manual
Nananvati R, Professional Practice
Apte V S, Professional Practice & Management
DISASTER MANAGEMENT -I
(BACH-1004)
Uni.Exam.Marks - 60
Sessional Marks
- 40
INTENT
To make the students understand the various Pre & Post- disaster design and
management measures to make buildings safe against Earthquakes.
CONTENT
UNIT-I
Disasters: Introduction, Typologies, Causes, Effects and prevention
Earthquake: Causes, Effects, Problems & design issues
General Principles of designing RCC & Masonry buildings against Earthquake
Special construction techniques to make buildings safe against Earthquake
Study of Earthquake Zones in India-- features and Design/ construction
requirements
Role of Architects and Planners in creating Safe Buildings/Cities
UNIT-II
Introduction , Causes, Effects of Fire, Floods, Cyclones, Landslide, Tsunami,
Avalanche, etc.
General requirements, principles and measures for making safe building design
against Fire, Floods, Cyclones, Landslide, Tsunami Avalanche, etc.
Special Technique for constructing safe buildings for above disasters
Pre- disaster and Post- disaster management- problems, issues and options
Teaching in the subject will be a combination of Expert lectures, Site visits to
Structurally safe buildings and discussions with reputed Architects.
Students should be encouraged to attend professional meets organized by the
professional bodies including IIA, COA, IOE etc. on Disaster resistant buildings.
In addition, four questions are to be set from UNIT 1 & II.
topics.

Architecture Course

Uploaded by

Architecture Course

Uploaded by

Preamble / Objective

The Bachelor of Architecture degree programme prepares students for professional

To stimulate sensitivity and unveil creative talents.

To reinforce intellectual capabilities and develop proficiency in professional skills

FIRST SEMESTER B.ARCHITECTURE

TEACHING SCHEDULE & SCHEME OF EXAMINATION-2012

Architectural Design And Theory-I

Building Construction & Material-1

Human Value & Professional Ethics

B. Architecture- Scheme 2012

Teaching Schedule and Scheme of Examination

Architectural design -II

Building Construction and

III SEMESTER B.ARCHITECTURE

Duration of Univ. Exam

ARCHITECTURAL DESIGN - III

06+University Viva voce.

CLIMATE & ARCHITECTURE - I

SURVEYING AND LEVELLING - I

External Viva Voce

CLIMATE AND SUSTANIABILTY

External Viva Voce

Duration (Hrs) Univ.

One Week Duration During/After Second Year

Building Construction &

12+University Viva voce.

Building Construction &

TEACHING SCHEDULE & SCHEME OF EXAMINATION -2012

12 + External Viva voce.

VII SEMESTER B.ARCHITECTURE

One Full Semester

VIII SEMESTER B.ARCHITECTURE

Duration of Univ. Exam Viva Voce/ Practical(Hrs)

No University ExamThe External marks shall be awarded

Duration of Univ. Exam Viva - Voce/

ELECTIVE-II (anyone of the following)

No University ExamThe External marks shall be awarded

Duration of Univ. Exam

No University ExamThe External marks shall

Max. Marks -40

UNIT-II (Application and Experience)

Compositions with 3-D Objects. (Black & white and colours.)

UNIT I BUILDING MATERIALS

1. Terminology used in Brick masonry,

W.B. Mckay vol. 1 to 4

Cell as a natural unit of space.

Slabs (One way & Two way)

1. The predominant pictorial nature of the Architects language.

GUIDELINES FOR PAPER SETTER

Gill Robert W.; Rendering with Pen and Ink.

Form, Space and order- D.K.Ching.

GUIDELINES FOR PAPER SETTER

Ecosystems: Concept of Ecosystem, Structure, interrelationship, producers, consumers

Wasteland reclamation. Consumerism and waste products. Environment Protection Act.

Suggested Readings/ Books:

III Semester Syllabus - 2012

Minimum two projects/ assignments to be handled by students individually.

GUIDELINES FOR PAPER SETTER

Manufacturing process and qualities of Decorative and Commercial Veneers

UNIT-II BUILDING CONSTRUCTION

GUIDELINES FOR PAPER SETTER

Tropics and its Climatic zones

GUIDELINES FOR PAPER SETTER

Teaching basics of Computers including introduction to basic hardware, operating

The teaching in this subject must bring out:

a) The predominantly pictorial nature of the Architect's language.

R. K. Bansal, Engineering Mechanics & Strength of Materials Publisher, Laxmi

Applied Mechanics:- K.L.Rao

J. C. Mehta,Applied Mechanics, Publisher: Delhi, New Asian Publishers 1963.

Stephen Timoshenko, Strength of Materials, Publisher, Van Nostrand, New York

B.ARCHITECTURE - III SEM.

IV Semester Syllabus - 2012

One compulsory question is to be set from the entire syllabus

Evaluation is to be done through viva voce by external examiner appointed by the

Rangwala S.C, Engineering Materials, Charotar Publishing House, India

Deshpande -Engineering Materials