AESV Catalogue Final

AESV / AESU / AESV-LA Series
Squirrel Cage Induction Motor

AESV1S / AESU1S / AESV1S-LA (IE1) STANDARD EFFICIENCY
AESV2S / AESU2S / AESV2S-LA (IE2) HIGH EFFICIENCY
AESV3S / AESU3S / AESV3S-LA (IE3) PREMIUM EFFICIENCY
Profile
Content
About TECO
Company Profile
P1
Introduction
P1-2
Design Specification
P2-3
IE1 Performance Data
P4-P8
P9-P12
P13-P16
Dimension Drawing B3
P17-P20
Dimension Drawing V1
P21-P24
Dimension Drawing B35
P25-28
Useful Formula
P29
Enquiry Form
P30
TECO Singapore provides a total solution of motors and

drives ever since it was established in 1972.
TECO Westinghouse Motor Company comprises the
experience of Westinghouse, a leader in the motor industry
since 1888 and TECO, a multinational conglomerate with
over 50 years of motor experience. TECO Singapore itself
was established in 1972 and has also set-up subsidiaries in
Thailand, Malaysia, Indonesia, Vietnam and India.
By realizing the potential for precision products, especially in
electronic and electrical equipment, TECO embarked a
foothold in Singapore and becomes a hub for manufacturing
and distribution of Electric Motors for the entire South-East
Asia since 1972. TECO Singapore has established overseas
manufacturing facilities and offices in Thailand, Malaysia,
Indonesia, Vietnam and India.
Today, TECO is the one of the top 5 motor manufacturers in
the world. Our motors are widely deployed in the industrial
sectors and government projects including Singapore Mass
Rapid Transit (SMRT), Land Transport Authority (LTA), Public
Utilities Board (PUB), Housing Development Board (HDB)
and Jurong Town Council (JTC) and Changi Airport.
Introduction to IEC 60034-30-1

Electric motor application in the industry consumes between 30% and 40% of the generated electrical energy
worldwide. Improving efficiency of the complete drive system is therefore a major concern in the energy-efficiency
efforts. Many different energy efficiency standards for cage induction motors from different countries were already
in use (NEMA, EPACT, CSA, CEMEP, COPANT, AS/NZS, JIS, GB and others) before IEC came up with an efficiency
standard. It became increasingly difficult for manufactures to design motors for a global market and for customers to
understand differences and similarities of standards in different countries, therefore IEC 60034-30-1 was developed
for global standards for easy reference.

IEC 60034-30-1: Efficiency classes of single-Speed, Three Phase, Cage-induction motor (IE-code)
As part of a concerted effort worldwide to reduce energy consumption, CO2 emissions and the impact of industrial
operations on the environment, TECO is committed to produce International Energy-Efficiency Class (IE) motors in
order to reduce the energy consumed and in turn reduce greenhouse gas emissions. TECOs V-series are designed,
manufactured and tested to meet latest European and International standard. The New V Series, which comprise of
full range of Efficiency Classes IE1, IE2 & IE3 Motors.
What does this standard covers?

It specifies efficiency classes for single-speed, three-phase, 50Hz and 60 Hz, cage-induction motors that have:
Rated Voltage up to 1000V;

Rated Output Power between 0.12kW and 1000kW;
Either 2, 4, 6 or 8 pole;
Rated either duty type S1 (continuous duty) or S3 (intermittent periodic duty) with a rated cycle duration
factor of 80% or higher;
Capable of operating direct on-line;
Rated for operating conditions in accordance with IEC 60034-1, clause 6.
CEMEP (SS530)
Before this standard was published, IEC design motors mostly follow CEMEP-EU standard for efficiency classification,
which is known as EFF2 (Standard Efficiency) or EFF1 (High Efficiency). The agreed minimum levels of the respective
classes are based on efficiency measurements according to old EN 60034-2:1996.
SS530 is the standard used in Singapore, SS530 define the usage of the motor into two categories: Continuous
use & Occasional used. The definition of the Continuous Use is that a motor is used more than 2900 Hours a year,
and Occasional Use is less than 2900 hours a year. For Continuous Use motor must meet a minimum nominal
efficiency equivalent to CEMEP EFF 1 and Occasional Use motor must meet a minimum nominal efficiency equivalent
to CEMEP EFF2.
CEMEP VS IEC 6003430-1

The method for measuring efficiency for low-voltage three phase asynchronous motor was revised with the new
EN 60034-2-1:2007 standard. The new standard significantly increases the accuracy under defined laboratory
conditions. IEC 60034-30, is based on the new 60034-2-1: 2007 standard for the definition of efficiency. Where else
CEMEP, was based on the previous EN 60034-2:1996. In a direct comparison of the both measuring methods at the
same motor, it is expected the efficiency level determine according to the new method are up to a few percentage
point below the efficiency level using the old method.
Efficiency
CEMEP
IE
Model
Standard
EFF2
IE 1
AESV1S/AESU1S
High
EFF1
IE 2
AESV2S/AESU2S
IE 3
AESV3S/AESU3S
Premium
Electrical Design
Type: Squirrel Cage Induction Motor
Ratings: 0.18 kW ~ 375 kW
Duty Rating
IEC 60034-2-1 Rotating electrical machines - Part 2-1:

Standard methods for determining losses and efficiency
from tests
IEC 60034-5 Rotating electrical machines - Part 5:
Degrees of protection provided by the integral design of
rotating electrical machines (IP code) - classification.
All Motors have a maximum continuous duty rating of S1

under rated load. For duty cycles other than S1 please
refer to TECO.

Methods of cooling (IC code).
Supply Voltage

Classification of types of enclosures and mounting
arrangements (IM code).
Stock motors are designed for operation as below:

2.2kW and below : 220~240V/ 380~415V 3 phase /50Hz
3 kW and above : 380~415V 3 phase /50Hz
Insulation System
All motor are design with class F insulation and Class B
temperature rise at ambient temperature of 40 C. For
any other insulation system other than standard Class F
insulation or Class B temperature rise at higher ambient
temperature than standard 40 C, please refer to TECO.
Inverter Duty
All motors are design to be suitable for Inverter use,
comply with IEC 60034-17. For intensive use of Inverter
duty operations complying to IEC60034-25, please refer
to TECO.
Standards
Rating and performance.

Terminal markings and direction of rotation.
Noise limits.
IEC 60034-11-1 Rotating electrical machines - Part 11-1:
Thermal protection.
Starting performance of single-speed three-phase cage
induction motors.
Mechanical vibration of certain machines - Limits of
vibration.
Cage induction motors when fed from converters Application guide.
IEC 60034-30-1 Rotating electrical machines - Part 30:
Efficiency classes for single-speed three-phase cage
induction motors.
Specification
Mechanical Design
Standards
Type: Squirrel Cage Induction Motor

Frame Size: 80M to 355C
Enclosure: Totally Enclosed Fan Cooled (TEFC), Totally
Enclosed Non Ventilated (TENV)
IEC 60072-1 Dimensions and output series for rotating

electrical machines - Part 1: Frame numbers 56 to 400
and ange numbers 55 to 1080.
Ingress Protection
Connection Diagram
Stock motors are design to meet Ingress Protection of

IP55, other special requirement please refer to TECO.
Drive Method
Direct-On-Line
For motor rating 2.2kW and below:
Low Voltage: 220~240V
High Voltage: 380~415V
Stock motors are design for both Direct Coupling and For motor rating 3kW and above:
Belt Drive use from frame size 80M to 250M. However, Low Voltage: 380~415V
for 2 Pole Motor design for both Direct coupling and Belt
Connec&on
Diagram
drive is from Frame size 80M to 200L only.
For belt
drive
Direct-On-Line
application for other frame size, pleaseFor
refer
to
TECO.
motor raFng 2.2kW and below:
Low Voltage : 220~240V
High Voltage : 380~415V
Bearings
High Quality Deep Groove Ball SealedFor

Bearings
are
use
motor raFng
3kW
and above:
for our stock motor from frame sizeLow
80
to : 225M
Voltage
380~415 and
Vacuum De-Gassed High Quality
Deep Groove
Ball Open
Connec&on
Diagram
Bearings are use for stock motor
fromStar-Delta
frame Size 250M Star-Delta
Direct-On-Line
U1,V1,W1,U2,V2
& W2 to Star-Delta starter
Connect
U1,V1,W1,U2,V2
2 to Star-Delta
starter panel.
to 355C. Any special bearings,For
please
refer
to
TECO.
motor raFng
2.2kW
and below: & WConnect
panel.
Low Voltage : 2 20~240V
Lubrication
supply Voltage (L1,L2,L3) to be connected to voltage

High Voltage : Power
380~415V
indicated in Delta conguraFon

column oSupply
n the motor
Power
Voltage(L1,L2,L3) to be connected to
nameplate.
above:
For motor raFng
3kW and
voltage
indicated in Delta configuration column on the
Both our sealed and open type bearing
are
grease
Low Voltage : 3 80~415
motor nameplate.
lubricated.

Star-Delta
Connect U1,V1,W1,U2,V2 & W2 to Star-Delta starter panel.

Frame: High Grade Cast Iron Power supply Voltage (L1,L2,L3) to be connected to voltage
End Bracket: High Grade Castindicated
Iron in Delta conguraFon column on the motor
External Fan: Polypropylene nameplate.

Fan Cover: Pressed Steel

Shaft: Carbon Steel
Construction
Lead: 6 Leads
Iron Core: High Grade, Insulated, Cold Rolled,
Electro Magnetic Steel Plate
Terminal Box
Stock motor are fitted with pressed steel T-Box for Frame
80M to 180M and Cast Iron T-Box for frame 200L to
355M. T-Box are designed for provision of rotation by
90 to every direction that enable cable entry from 4
directions.
Finishing
Stock motor are completed with Phenolic Rust Proof Base
Plus Lacquer Surface Finished Painting as standard:
Gray Color ( Munsell 7.5B 3.5/0.5 ) (IE 1)
Blue Color ( Munsell 5PB 3/8 ) (IE 2)
Green Color ( Munsell 7.5GY 4.5/3.5 ) (IE 3)
Any other colour finishing, please refer to TECO.
Lifting Device
All motor from Frame Size 90 and above comes with dual
eye bolt for lifting purposes.
Special Enhancement
The following enhancement are also available.
Please refer to TECO.
IP 56
Class H Insulation
Inverter Duty Wire
Special Paint Finishes
Special Shaft Extensions
Dual Speed
Smoke Spill Duty
Stainless Steel Hardware
Conversion of sealed bearing to open bearing
Optional Accessories
Thermal Protection Accessories
PTC Thermistors
Resistance Temperature Detectors (RTD)
Thermostat
Moisture Protection Accessories

Space Heater
Performance
IE 1
Performance Data
Performance
IE 1 Performance Data (2 Pole)
Motor Type: AESV1S / AESU1S / AESV1S-LA
OUTPUT
EFFICIENCY
FULL
FRAME FULL
LOAD
LOAD
3/4
LOAD
1/2
LOAD
CURRENT
POWER FACTOR
FULL
LOAD
3/4
LOAD
1/2
LOAD
FULL LOAD (A)
TORQUE
LRC
FULL
LOCKED
BREAK-
ROTOR
APPROX.
80M
380
72.1 71.6 68.8 88.0 81.0 68.0 1.80
400
1.71
ROTOR PULL-UP DOWN

WEIGHT
GD
LOAD
(A)
415 400V kg-m %FLT %FLT %FLT kg-m2 kg
1.64 11 0.261 235 210 255 0.005 16.5
2810
80M
75.0 75.9 74.5 87.5 81.0 70.0 2.55
2.42
2.33
17
0.381 265 235 290 0.006 18.0
2850
90S
77.2 77.2 75.3 88.0 82.0 70.5 3.35
3.19
3.07
21
0.512 225 210 290 0.010 23.0
2.2
2855
90L
79.7 80.7 79.7 89.0 84.0 74.0 4.71
4.48
4.31
33
0.750 240 230 310 0.013 27.0
2890
100L
81.5 82.0 80.5 89.0 85.0 76.0 6.28
5.97
5.75
50
1.010 215 195 280 0.022 37.5
3.7
2880
112M
82.6 83.6 81.6 90.0 87.0 79.0 7.56
7.18
6.92
62
1.250 240 180 320 0.042 47.5
5.5
2910
112M
83.1 84.1 83.1 90.5 87.5 79.5 8.08
7.68
7.40
67
1.337 200 170 325 0.042 47.5
5.5
7.5
2900
132S
84.7 83.7 81.3 88.0 85.5 79.0 11.2
10.7
10.3
69
1.845 170 150 235 0.057 61.0
7.5
10
2895
132S
86.0 86.0 84.5 82.0 80.0 76.0 16.2
15.4
14.8
91
2.521 170 145 225 0.063 65.0
11
15
2945
160M
87.6 87.6 85.6 89.0 85.5 77.5 21.4
20.4
19.6
176
3.634 225 140 280 0.154 105
15
20
2940
160M
88.7 89.2 88.2 91.0 90.0 85.5 28.2
26.8
25.9
210
4.964 220 135 260 0.192 120
18.5
25
2940
160L
89.3 89.8 89.3 92.0 90.0 85.5 34.2
32.5
31.3
291
6.123 270 190 310 0.237 135
22
30
2945
180M
89.9 89.9 88.9 90.0 88.0 83.5 41.3
39.2
37.8
314
7.269 220 175 280 0.283 175
30
40
2955
200L
90.7 90.2 87.7 84.5 79.0 71.0 59.5
56.5
54.5
441
9.878 185 140 275 0.521 240
37
50
2955
200L
91.2 91.2 90.2 88.5 87.0 81.0 69.6
66.2
63.8
527
12.18 195 135 270 0.633 270
kW
HP
0.75
rpm
2800
1.1
1.5
1.5
SIZE
(%)
(%)
(%)
(%)
(%)
(%)
VOLTAGE
45
60
2955 225MA 91.7 91.2 89.7 91.5 90.0 86.0 81.5
77.4
74.6
600
14.82 150 130 260 1.074 315
55
75
2970 250MA 92.1 92.1 91.1 91.0 90.0 85.5 99.7
94.7
91.3
697
18.02 135
75
100
2970 280SA 92.7 92.7 91.4 87.0 85.0 80.0 141
134
129
966
24.57 130 120 260 1.759 515
90
125
2965 280MA 93.0 92.8 91.9 87.0 84.0 76.5 169
161
155
1157 29.53 140 120 290 2.023 552
110
150
2970 315SA 93.5 93.5 92.8 89.0 87.0 81.0 201
191
184
1330 36.09 135
132
175
2970 315MA 93.7 93.7 93.0 89.5 88.5 83.5 239
227
219
1570 43.31 145 120 230 4.400 900
(160) (215) 2970 315MA 94.0 94.0 93.2 91.5 90.5 86.0 283
269
259
2050 52.50 210 175 240 5.200 950
160
215
2970 315LA 94.0 94.0 93.2 91.5 90.5 86.0 283
269
259
2050 52.50 210 175 240 5.200 980
200
270
2970 315LA 94.0 94.0 93.4 92.0 91.0 87.5 351
334
322
2500 65.62 210 175 240 6.400 1100
(220) (300) 2970 315CA 94.4 94.0 92.8 90.5 89.0 83.5 391
372
358
2800 72.18 150 125 270 7.200 1380
220
2975 355MA 94.5 94.0 93.0 90.0 88.0 81.0 393
373
360
2840 72.06 140
(250) (335) 2972 315CA 94.6 94.1 93.0 92.0 91.0 87.5 436
415
400
3100 81.97 150 125 270 8.400 1500
250
2978 355MA 94.6 94.2 93.3 91.0 89.0 83.5 441
419
404
3180 81.81 150 125 280 12.00 1650
(315) (420) 2975 315DA 94.8 94.4 93.5 92.5 91.5 88.0 546
518
500
3900 103.2 160 130 280 10.40 1720
315
420
2978 355LA 94.8 94.4 93.5 91.5 90.0 86.0 552
524
505
3900 103.1 150 125 280 14.00 1900
375
500
2980 355CA 94.8 94.8 93.7 92.0 90.5 86.5 653
621
598
4500 122.6 150 125 280 12.40 2340
Note:
300
335
1. The above are typical values based on test according to IEC 60045-2-1:2007. (DY)
2. Tolerance according to IEC 60034-1.
3. Breakdown & Locked rotor torques are show as average expected voltages
4. Efficiency, power factor, speed and torque are the same for other voltages.
Current values vary inversely with voltage
5. Output in ( ) is for Optional Frame size upon request
6. Frame size 315C, 315D & 355C: only suitable for IM B3 and IM B5
7. Noise according to IEC 60034-9.
8. Data subject to change without prior notice.
115 295 1.211 405
115 230 3.600 800
115 280 10.40 1550
Performance
OUTPUT
kW
0.55
HP
EFFICIENCY
FULL
LOAD
rpm
0.75 1425
FRAME
SIZE
CURRENT
POWER FACTOR
FULL
LOAD
3/4
LOAD
1/2
LOAD
FULL
LOAD
3/4
LOAD
1/2
LOAD
(%)
(%)
(%)
(%)
(%)
(%)
TORQUE
FULL LOAD (A)

VOLTAGE
LRC
FULL
LOAD
(A)
400V kg-m
BREAKLOCKED
ROTOR PULL-UP DOWN
ROTOR
GD2
APPROX.
WEIGHT
%FLT %FLT %FLT
kg-m2
kg
380
400
415
80M
70.0 68.9 62.1 73.0 62.5 50.0 1.64
1.55
1.50
9.0
0.376 220 200 265 0.007 15.0
0.75
1425
80M
72.1 71.6 68.3 77.0 66.0 52.5 2.05
1.95
1.88
12
0.512 240 215 275 0.009 16.5
1.1
1.5
1425
90S
75.0 75.0 68.1 79.0 68.5 55.5 2.82
2.68
2.58
17
0.751 220 165 235 0.014 22.0
1.5
1425
90L
77.2 77.2 74.2 81.0 72.5 59.0 3.64
3.46
3.34
23
1.024 230 175 240 0.017 24.0
2.2
1435
100L
79.7 79.7 77.2 79.5 71.0 57.0 5.28
5.01
4.83
39
1.492 210 185 300 0.033 32.0
1445
100L
81.5 80.9 77.5 85.0 76.0 63.0 6.58
6.25
6.02
52
2.020 250 180 300 0.046 37.5
3.7
1445
112M
82.6 82.6 80.6 82.0 74.5 64.0 8.30
7.88
7.60
62
2.491 220 180 290 0.059 44.5
5.5
1445
112M
83.1 83.6 81.7 82.0 76.0 64.0 8.92
8.47
8.17
60
2.693 190 180 260 0.065 47.5
5.5
7.5
1465
132S
84.7 84.7 83.2 82.5 75.5 63.5 12.0
11.4
11.0
86
3.653 235 190 315 0.103 64.0
7.5
10
1460
132M
86.0 86.5 85.0 86.0 81.5 71.5 15.4
14.6
14.1
109
4.998 215 175 295 0.133 78.0
11
15
1465
160M
87.6 88.1 87.1 86.5 82.5 74.5 22.1
21.0
20.2
155
7.306 200 150 255 0.271 105
15
20
1465
160L
88.7 88.7 87.2 86.0 80.5 71.0 29.9
28.4
27.4
217
9.962 215 155 265 0.396 130
18.5
25
1475
180M
89.3 89.3 88.8 86.0 83.5 76.5 36.6
34.8
33.5
220
12.20 165 125 220 0.611 175
22
30
1475
180L
89.9 89.9 88.9 84.0 80.5 72.5 44.3
42.0
40.5
299
14.51 195 150 230 0.712 190
30
40
1475
200L
90.7 91.2 90.7 86.5 83.5 76.5 58.1
55.2
53.2
444
19.79 240 185 275 1.220 255
37
50
1480 225SC 91.2 90.7 89.7 85.0 81.5 74.5 72.5
68.9
66.4
489
24.33 190 160 245 1.649 315
45
60
1475 225MC 91.7 92.2 91.2 85.5 83.0 76.5 87.2
82.8
79.8
523
29.68 175 145 220 1.731 330
55
75
1485 250MC 92.1 92.1 91.1 87.0 85.0 79.5
104
99.1
95.5
714
36.04 220
75
100
1480 280SB 92.7 92.7 92.2 84.5 81.0 73.5
145
138
133
948
49.31 175 165 275 4.224 566
110
230 2.755 450
90
125
1480 280MB 93.0 93.2 92.5 85.5 82.5 72.5
172
163
157
1164 59.17 175 165 270 4.943 624
110
150
1480 315SB 93.5 93.5 92.9 86.5 83.5 75.5
207
196
189
1330 72.43 190 155 250 7.200 800
132
175
1480 315MB 93.7 93.7 93.2 86.5 83.0 74.5
247
235
227
1570 86.91 200 165 250 8.400 900
(160) (215) 1482 315MB 94.0 94.0 93.4 87.5 84.5 77.0
296
281
271
2000 105.2 200 165 250 10.00 960
160
215
1482 315LB 94.0 94.0 93.4 87.5 84.5 77.0
296
281
271
2000 105.2 200 165 250 10.00 990
200
270
1482 315LB 94.0 94.1 93.6 88.5 86.0 79.0
365
347
334
2500 131.5 210 175 250 13.20 1160
(220) (300) 1484 315CB 94.5 94.5 93.7 89.5 88.0 82.5
395
375
362
2840 144.5 200 165 250 19.20 1420
220
1486 355MB 94.5 94.3 93.4 87.8 85.0 78.4
403
383
369
2750 144.3 180 160 250 20.40 1550
(250) (335) 1485 315CB 94.6 94.5 93.8 89.5 87.5 82.0
449
426
411
3150 164.1 200 165 260 21.20 1500
250
1486 355MB 94.6 94.4 93.8 88.0 85.5 78.0
456
433
418
3150 163.9 190 155 270 23.20 1650
(315) (420) 1485 315DB 94.9 94.9 94.4 90.0 88.0 82.5
560
532
513
4100 206.7 200 165 260 26.40 1780
315
420
1486 355LB 94.9 94.8 94.3 88.8 86.3 79.5
568
540
520
3900 206.6 200 165 270 28.80 1900
375
500
1486 355CB 94.9 94.9 94.4 89.5 88.0 82.0
671
637
614
4500 245.9 200 165 270 34.80 2340
300
335
Note:
Performance
OUTPUT
EFFICIENCY
FULL
LOAD
kW
HP
0.55
0.75
915
0.75
935
1.1
1.5
1.5
rpm
FRAME
SIZE
CURRENT
POWER FACTOR
FULL
LOAD
3/4
LOAD
1/2
LOAD
FULL
LOAD
3/4
LOAD
1/2
LOAD
(%)
(%)
(%)
(%)
(%)
(%)
FULL LOAD (A)

VOLTAGE
TORQUE
LRC
FULL
LOAD
(A)
400V kg-m
BREAKLOCKED
ROTOR PULL-UP DOWN
ROTOR
GD2
APPROX.
WEIGHT
%FLT %FLT %FLT
kg-m2
kg
380
400
415
80M
67.5 67.0 62.0 72.0 60.5 48.0 1.72
1.63
1.57
8.0
0.585 220 210 225 0.012 18.0
90S
70.0 67.2 62.9 71.0 60.5 48.0 2.29
2.18
2.10
11
0.780 190 175 285 0.017 24.0
935
90L
72.9 71.0 66.1 68.5 57.0 44.5 3.35
3.18
3.06
17
1.145 220 205 260 0.023 27.5
935
100L
75.2 75.2 69.8 75.0 65.0 52.0 4.04
3.84
3.70
21
1.561 200 170 235 0.035 31.5
2.2
950
112M
77.7 77.7 74.8 73.5 63.0 50.0 5.85
5.56
5.36
34
2.253 205 195 270 0.058 42.5
965
132S
79.7 79.7 77.3 72.5 63.5 50.0 7.89
7.49
7.22
45
3.025 195 185 270 0.097 57.5
3.7
960
132M
80.9 80.9 75.9 75.5 65.5 53.5 9.20
8.74
8.43
61
3.750 180 160 230 0.114 62.5
5.5
960
132M
81.4 81.9 80.4 77.5 69.5 56.5 9.63
9.15
8.82
59
4.054 190 175 275 0.131 69.0
5.5
7.5
965
132M
83.1 82.6 81.1 72.0 63.5 50.0 14.0
13.3
12.8
92
5.546 210 160 280 0.171 77.5
7.5
10
960
160M
84.7 83.7 81.3 81.5 76.5 66.0 16.5
15.7
15.1
94
7.602 210 185 255 0.363
11
15
965
160L
86.4 86.9 85.9 81.5 76.0 65.0 23.7
22.5
21.7
155
11.09 245 230 270 0.558 140
15
20
970
180L
87.7 88.2 87.7 82.0 79.5 73.5 31.7
30.1
29.0
178
15.05 195 140 210 1.342 195
18.5
25
975
200L
88.6 88.6 87.6 82.5 79.0 70.5 38.5
36.5
35.2
223
18.46 200 185 220 1.604 250
22
30
975
200L
89.2 89.7 89.7 82.0 78.5 69.5 45.7
43.4
41.8
296
21.95 210 180 220 1.912 270
30
40
975
225MC 90.2 90.2 87.2 86.0 83.5 76.0 58.8
55.8
53.8
344
29.94 175 155 210 2.442 325
37
50
975
250MC 90.8 90.8 89.8 85.5 81.0 73.0 72.4
68.8
66.3
451
36.92 185 180 220 3.373 405
45
60
980
280SB 91.4 91.5 90.7 82.5 79.5 71.0 90.7
86.1
83.0
597
44.68 150 140 230 4.400 500
55
75
980
280MB 91.9 92.0 91.3 83.5 80.5 72.0
109
103
99.7
680
54.61 150 140 235 5.290 557
75
100
985
315SB 92.6 92.7 92.1 84.5 81.5 72.5
146
138
133
840
74.20 160 130 230 10.40 800
90
125
985
315MB 93.0 93.0 92.5 84.5 81.5 72.0
174
165
159
1070 89.04 175 145 230 12.80 880
(110) (150)
988
315MB 93.5 93.5 93.0 84.5 81.5 72.5
212
201
194
1295 108.5 175 145 230 15.60 960
110
150
988
315LB 93.5 93.5 93.0 84.5 81.5 72.5
212
201
194
1295 108.5 175 145 230 15.60 990
132
175
988
315LB 93.7 93.7 93.2 84.0 80.0 71.0
255
242
233
1530 130.2 210 175 240 17.20 1120
(160) (215)
988
315LB 94.0 94.0 93.4 84.8 81.6 73.5
305
290
279
1950 157.8 210 175 240 23.20 1270
160
215
990
355MB 94.0 94.0 93.4 86.0 83.0 75.0
301
286
275
2054 157.5 180 160 300 28.00 1550
(200) (270)
988
315CB 94.2 94.2 93.8 85.5 83.0 74.0
377
358
345
2360 197.3 200 165 240 30.80 1650
200
270
990
355MB 94.0 94.0 93.6 86.0 83.0 75.0
376
357
344
2450 196.9 200 165 240 33.60 1750
(220) (300)
988
315CB 94.5 94.5 94.0 86.5 84.5 78.0
409
388
374
2550 217.0 180 160 240 35.20 1740
220
300
990
355MB 94.5 94.5 94.0 86.0 83.5 76.0
411
391
377
2700 216.6 200 165 240 37.60 1800
(250) (335)
988
315DB 94.6 94.6 94.2 86.5 85.0 78.5
464
441
425
2950 246.6 200 165 240 41.20 1860
250
335
988
355LB 94.6 94.6 94.2 86.0 83.0 75.5
467
444
428
3050 246.6 200 165 250 41.20 1950
315
420
990
355CB 94.8 94.8 94.4 87.5 85.5 79.0
577
548
528
3830 310.1 210 175 240 56.00 2600
Note:
110
Performance
OUTPUT
EFFICIENCY
FULL
LOAD
FRAME
SIZE
CURRENT
POWER FACTOR
FULL
LOAD
3/4
LOAD
1/2
LOAD
FULL
LOAD
3/4
LOAD
1/2
LOAD
(%)
(%)
(%)
(%)
(%)
(%)
FULL LOAD (A)

VOLTAGE
TORQUE
LRC
FULL
LOAD
(A)
400V kg-m
BREAKLOCKED
ROTOR PULL-UP DOWN
ROTOR
GD2
APPROX.
WEIGHT
%FLT %FLT %FLT
kg-m2
kg
kW
HP
0.18
0.25
710
80M
0.37
0.5
705
90S
59.5 56.7 50.5 61.5 52.0 41.5 1.54
1.46
1.41
5.0
0.511 180 170 240 0.017 24.0
0.55
0.75
700
90L
63.6 61.7 55.7 61.5 53.0 42.0 2.14
2.03
1.96
7.3
0.765 180 150 250 0.022 26.0
0.75
700
100L
66.7 65.2 59.8 66.0 56.5 45.5 2.59
2.46
2.37
9.4
1.043 180 160 210 0.033 29.0
1.1
1.5
690
100L
70.2 69.7 65.4 67.5 59.0 47.0 3.53
3.35
3.23
15
1.551 200 175 210 0.046 34.5
1.5
705
112M
72.8 72.3 68.5 67.0 59.0 46.5 4.67
4.44
4.28
20
2.070 160 135 215 0.065 41.0
2.2
700
132S
75.9 75.9 73.6 72.5 64.0 51.0 6.07
5.77
5.56
26
3.058 190 175 225 0.115 54.0
rpm
380
400
415
50.0 44.5 36.0 46.5 40.0 34.0 1.18
1.12
1.08
4.7
0.247 360 350 370 0.010 17.0
700
132M
78.1 78.6 76.4 73.0 65.0 52.0 7.99
7.59
7.32
34
4.170 190 175 220 0.138 60.0
3.7
720
160M
79.4 79.4 77.4 71.0 62.5 49.0 9.97
9.47
9.13
59
5.000 200 180 270 0.265 83.0
5.5
720
160M
80.0 80.3 78.2 71.5 64.0 51.5 10.6
10.1
9.73
59
5.406 200 180 270 0.265 83.0
5.5
7.5
720
160M
82.0 82.4 80.5 72.0 64.5 52.5 14.2
13.4
13.0
81
7.433 200 180 270 0.374 98.0
7.5
10
720
160L
83.8 84.3 82.7 73.5 66.5 54.5 18.5
17.6
16.9
107
10.14 200 190 270 0.530
11
15
725
180L
85.8 86.3 85.3 75.0 68.0 55.5 26.0
24.7
23.8
138
14.76 190 170 215 0.990 156
200L
115
15
20
725
87.2 87.8 86.8 76.5 70.5 59.0 34.2
32.5
31.3
164
20.13 190 170 205 1.418 224
18.5
25
730
225SC 88.1 88.1 87.1 78.0 72.0 62.0 40.9
38.9
37.5
236
24.66 185 150 200 2.093 288
22
30
730
225MC 88.8 88.3 86.8 77.0 70.5 59.0 48.9
46.4
44.8
281
29.32 200 175 210 2.442 316
30
40
730
250MC 89.9 89.4 87.9 78.5 70.5 60.0 64.6
61.4
59.1
378
39.99 190 160 210 3.475 389
37
50
735
280SB 90.6 91.0 90.4 77.5 78.5 75.0 80.1
76.1
73.3
495
48.98 130 125 210 5.553 553
45
60
735
280MB 91.2 91.6 91.1 78.0 79.2 76.0 96.1
91.3
88.0
595
59.57 135 125 210 6.760 624
55
75
735
315SB 92.5 92.5 91.8 79.5 75.0 64.0
114
108
104
630
72.92 165 135 220 15.20 840
75
100
735
315MB 92.7 92.7 92.0 80.5 76.0 66.0
153
145
140
820
99.44 160 130 220 19.60 960
90
125
735
315LB 93.0 93.0 92.3 81.0 77.0 67.5
182
172
166
1000 119.3 160 130 220 23.60 1060
110
150
735
315LB 93.5 93.5 92.9 81.0 78.0 68.5
221
210
202
1250 145.8 160 130 220 30.40 1160
740
315CB 93.9 93.9 93.1 79.5 74.5 60.0
269
255
246
1550 173.8 110
740
(132) (175)
132
175
(160) (215)
160
215
(200) (270)
200
270
(220) (300)
95
230 28.00 1550
355MB 93.9 93.9 93.1 82.5 78.5 69.0
259
246
237
1950 173.8 120 100 240 34.00 1600
740
315CB 94.3 94.3 93.8 80.5 75.5 65.0
320
304
293
1850 210.7 110
95
230 34.40 1650
740
355MB 94.3 94.3 93.8 82.5 78.5 69.0
312
297
286
1950 210.7 130
110
240 39.60 1750
740
315DB 94.4 94.4 93.8 80.5 75.0 64.5
400
380
366
2300 263.4 110
95
230 41.20 1800
740
355LB 94.4 94.4 93.8 83.0 79.0 69.5
388
368
355
2550 263.4 130
110
240 52.00 2000
740
315DB 94.6 94.6 94.1 80.5 75.0 64.5
439
417
402
2550 289.7 110
95
230 45.60 1900
2700 289.7 125 105 240 56.40 2100

3200 329.2 135 110 240 67.60 2400
220
300
740
355LB 94.6 94.6 94.1 83.5 80.0 71.5
423
402
387
250
335
740
355CB 94.8 94.8 94.3 83.5 80.0 71.0
480
456
439
Note:
8. 8 pole : Efficiency per TECO performance standard ( Comply to min. requirement of IE1 efficiency).
Performance
IE 2
Performance Data
Performance
OUTPUT
EFFICIENCY
FULL
LOAD
kW
HP
0.75
2850
1.1
1.5
1.5
2.2
FULL
LOAD
3/4
LOAD
1/2
LOAD
FULL
LOAD
3/4
LOAD
1/2
LOAD
(%)
(%)
(%)
(%)
(%)
(%)
FULL LOAD (A)

VOLTAGE
TORQUE
LRC
FULL
LOAD
(A)
400V kg-m
BREAKLOCKED
ROTOR PULL-UP DOWN
ROTOR
GD2
APPROX.
WEIGHT
%FLT %FLT %FLT
kg-m2
kg
380
400
415
80M
77.4 78.0 76.3 85.5 78.5 66.0 1.72
1.64
1.58
9.0
0.256 215 180 280 0.005 16.5
2875
80M
79.6 80.0 78.3 85.5 79.0 67.0 2.46
2.33
2.25
17
0.372 255 200 305 0.007 19.5
2880
90S
81.3 81.8 80.3 86.5 80.5 69.0 3.24
3.08
2.97
24
0.507 260 245 325 0.011 24.0
2875
90L
83.2 84.3 83.4 87.5 82.0 70.5 4.59
4.36
4.20
35
0.745 285 240 335 0.014 28.0
2895
100L
84.6 85.9 85.7 88.0 83.0 73.0 6.12
5.82
5.61
49
1.008 245 225 310 0.022 38.0
3.7
2880
112M
85.5 86.5 85.4 90.0 87.0 79.0 7.31
6.94
6.69
59
1.250 240 210 320 0.038 47.5
5.5
2880
112M
85.8 86.9 86.6 91.0 88.0 81.0 7.78
7.39
7.13
63
1.351 235 205 315 0.042 47.5
5.5
7.5
2925
132S
87.0 87.2 86.2 86.0 82.5 74.5 11.2
10.6
10.2
82
1.830 240 180 300 0.063 66.0
7.5
10
2920
132S
88.1 88.3 87.8 82.5 77.5 68.0 15.7
14.9
14.4
98
2.499 250 230 275 0.075 72.5
11
15
2950
160M
89.4 89.3 88.1 90.5 87.5 80.5 20.7
19.6
18.9
172
3.628 230 180 305 0.154
15
20
2930
160M
90.3 91.0 91.2 93.5 92.5 89.0 27.0
25.6
24.7
225
4.981 245 165 280 0.192 120
18.5
25
2925
160L
90.9 91.5 91.7 93.0 91.5 88.0 33.2
31.6
30.4
290
6.154 260 185 310 0.237 135
22
30
2930
180M
91.3 91.2 90.5 91.5 90.0 85.5 40.0
38.0
36.6
295
7.306 215 185 300 0.283 175
30
40
2945
200L
92.0 92.2 91.3 90.5 89.5 86.0 54.7
52.0
50.1
440
9.912 210 150 300 0.521 245
37
50
2945
200L
92.5 92.9 92.7 91.5 90.5 87.5 66.4
63.1
60.8
585
12.22 175 130 260 0.663 275
45
60
2965 225MA 92.9 92.5 91.3 91.0 88.5 82.5 80.9
76.8
74.1
710
14.77 170 140 300 1.074 320
55
75
2970 250MA 93.2 93.2 92.6 92.5 91.5 88.0 96.9
92.1
88.8
730
18.02 165 150 300 1.343 430
75
100
2960 280SA 93.8 93.6 92.8 89.0 87.5 82.0
136
130
125
885
24.69 130 120 285 1.759 522
90
110
125
150
2970 280MA 94.1 93.9 92.8 87.5 86.0 76.0

2975 315SA 94.3 94.1 93.0 88.0 85.0 76.5
166
201
158
191
152
184
1335 29.53 175 135 300 2.287 596

1520 36.03 200 165 270 3.600 850
132
175
2975 315MA 94.6 94.3 93.4 89.5 88.0 83.0
237
225
217
1750 43.24 200 165 270 4.400 920
(160) (215) 2975 315MA 94.8 94.5 93.5 91.0 89.5 84.5
282
268
258
2175 52.41 210 175 270 5.600 980
160
215
2975 315LA 94.8 94.5 93.5 91.0 89.5 84.5
282
268
258
2175 52.41 210 175 270 5.600 1010
200
270
2975 315LA 95.0 94.8 93.8 92.0 91.0 88.5
348
330
318
2620 65.51 210 175 260 7.200 1140
(220) (300) 2972 315CA 95.0 94.6 93.5 91.5 90.0 86.0
385
365
352
2750 72.14 140 120 280 7.600 1420
220
2975 355MA 95.0 94.6 93.5 91.0 90.0 85.0
387
367
354
2750 72.06 130
(250) (335) 2972 315CA 95.0 94.6 93.4 92.0 91.0 88.0
435
413
398
3100 81.97 140 120 280 8.400 1540
250
2975 355MA 95.0 94.6 93.4 91.5 90.0 85.5
437
415
400
3100 81.89 140 120 280 12.40 1700
(315) (420) 2975 315DA 95.0 94.8 94.0 92.5 91.5 89.0
545
517
499
3900 103.2 150 135 280 10.80 1760
315
420
2978 355LA 95.0 94.8 93.8 92.0 91.0 87.0
548
520
501
3900 103.1 140 120 280 14.40 2000
375
500
2978 355CA 95.3 95.0 94.4 91.0 90.0 86.0
657
624
602
4500 122.7 150 125 280 16.00 2400
300
335
rpm
FRAME
SIZE
CURRENT
POWER FACTOR
110
110
280 8.100 1650
Note:
10
Performance
OUTPUT
kW
0.55
HP
EFFICIENCY
FULL
LOAD
rpm
FULL
LOAD
3/4
LOAD
1/2
LOAD
FULL
LOAD
3/4
LOAD
1/2
LOAD
(%)
(%)
(%)
(%)
(%)
(%)
FULL LOAD (A)

VOLTAGE
380
400
415
TORQUE
LRC
FULL
LOAD
(A)
400V kg-m
BREAKLOCKED
ROTOR PULL-UP DOWN
ROTOR
GD2
APPROX.
WEIGHT
%FLT %FLT %FLT
kg-m2
kg
80M
78.1 78.0 75.1 72.5 62.0 47.5 1.48
1.40
1.35
8.0
0.376 290 260 305 0.010 17.5
0.75
1415
80M
79.6 79.5 76.9 73.5 63.5 49.5 1.95
1.85
1.78
11
0.516 300 295 325 0.013 20.5
1.1
1.5
1445
90S
81.4 81.4 78.9 76.0 67.0 53.0 2.70
2.57
2.47
19
0.741 270 205 325 0.017 25.0
1.5
1435
90L
82.8 83.7 82.6 81.0 73.0 59.5 3.40
3.23
3.11
23
1.017 250 180 300 0.022 27.5
2.2
1450
100L
84.3 85.0 84.1 81.5 74.0 61.0 4.87
4.62
4.45
33
1.476 210 170 300 0.041 37.0
1445
100L
85.5 85.9 84.8 82.0 75.0 62.5 6.50
6.18
5.95
44
2.020 210 170 300 0.050 40.0
3.7
1435
112M
86.3 87.0 87.0 86.5 83.0 74.0 7.53
7.15
6.90
59
2.509 220 150 290 0.076 50.0
5.5
1450
112M
86.6 87.6 87.5 85.0 80.5 71.0 8.26
7.84
7.56
58
2.684 220 200 300 0.083 53.0
5.5
7.5
1455
132S
87.7 88.7 88.6 85.5 80.5 70.0 11.1
10.6
10.2
81
3.678 255 210 305 0.123 70.5
7.5
10
1460
132M
88.7 89.6 89.5 84.0 78.5 67.0 15.3
14.5
14.0
112
4.998 275 200 305 0.142 82.0
11
15
1465
160M
89.8 90.6 90.7 86.5 83.0 74.5 21.5
20.4
19.7
160
7.306 220 180 300 0.296
15
20
1470
160L
90.6 91.3 91.2 86.5 82.5 73.5 29.1
27.6
26.6
220
9.929 220 185 300 0.427 140
18.5
25
1475
180M
91.2 91.7 91.6 85.5 83.0 76.5 36.0
34.2
33.0
230
12.20 200 185 300 0.654 180
22
30
1470
180L
91.6 92.4 92.2 85.5 83.5 77.5 42.7
40.5
39.1
270
14.56 195 155 250 0.770 200
30
40
1470
200L
92.3 92.9 92.9 87.5 84.5 77.0 56.4
53.6
51.7
420
19.86 230 180 300 1.217 255
37
50
1475 225SC 92.7 93.3 93.3 87.5 86.0 80.0 69.3
65.8
63.5
430
24.41 220 175 260 1.649 320
45
60
1480 225MC 93.1 93.3 92.9 86.0 82.5 75.0 85.4
81.1
78.2
580
29.58 210 170 300 1.979 355
55
75
1485 250MC 93.5 93.7 93.3 87.5 85.0 79.0
102
97.0
93.5
780
36.04 245 180 300 3.621 455
75
100
1480 280SB 94.0 94.0 93.2 87.0 84.0 77.5
139
132
128
1015 49.38 185 170 300 4.853 604
90
125
1480 280MB 94.2 94.0 93.2 85.5 82.5 75.5
170
161
155
1260 59.26 200 190 280 5.393 648
110
150
1484 315SB 94.5 94.5 93.8 88.5 86.0 79.0
200
190
183
1400 72.23 200 165 270 8.800 860
132
175
1484 315MB 94.7 94.7 94.0 88.5 86.0 79.0
239
227
219
1620 86.68 200 165 270 10.00 970
(160) (215) 1485 315MB 94.9 94.9 94.2 88.5 87.0 80.0
289
275
265
2000 105.0 210 175 270 11.60 1020
160
215
1485 315LB 94.9 94.9 94.2 88.5 87.0 80.0
289
275
265
2000 105.0 210 175 270 11.60 1050
200
270
1485 315LB 95.1 95.1 94.6 89.0 87.5 82.0
359
341
329
2450 131.2 200 165 270 14.40 1240
(220) (300) 1485 315CB 95.1 95.1 94.4 90.0 89.0 84.0
391
371
358
2800 144.4 210 175 260 22.00 1500
220
1485 355MB 95.1 95.1 94.4 87.0 83.5 74.5
404
384
370
2850 144.4 200 165 270 21.60 1650
(250) (335) 1485 315CB 95.1 95.1 94.4 90.0 89.0 84.5
444
422
406
3100 164.1 210 175 260 24.00 1620
250
1486 355MB 95.1 95.1 94.4 88.0 85.5 78.5
454
431
416
3100 163.9 200 165 270 24.40 1700
(315) (420) 1485 315DB 95.1 95.1 94.6 89.5 87.5 81.5
562
534
515
4100 206.7 210 175 260 26.40 1820
315
420
1488 355LB 95.1 95.1 94.6 88.5 85.5 78.5
569
540
521
3900 206.3 200 165 270 28.80 2000
375
500
1488 355CB 95.3 95.3 94.8 89.5 87.5 81.5
668
635
612
4450 245.6 200 165 270 34.40 2400
Note:
0.75 1425
FRAME
SIZE
CURRENT
POWER FACTOR
300
335
11
115
Performance
OUTPUT
EFFICIENCY
FULL
LOAD
kW
HP
0.55
0.75
900
0.75
1.1
1.5
1.5
rpm
FRAME
SIZE
CURRENT
POWER FACTOR
FULL
LOAD
3/4
LOAD
1/2
LOAD
FULL
LOAD
3/4
LOAD
1/2
LOAD
(%)
(%)
(%)
(%)
(%)
(%)
FULL LOAD (A)

VOLTAGE
TORQUE
LRC
FULL
LOAD
(A)
400V kg-m
BREAKLOCKED
ROTOR PULL-UP DOWN
ROTOR
GD2
APPROX.
WEIGHT
%FLT %FLT %FLT
kg-m2
kg
380
400
415
80M
73.1 68.8 64.9 67.0 57.0 44.0 1.71
1.62
1.56
7.0
0.595 225 220 250 0.012 18.0
935
90S
75.9 76.4 73.9 69.5 60.0 46.5 2.16
2.05
1.98
10
0.780 210 185 260 0.019 26.0
930
90L
78.1 78.8 76.9 71.5 62.0 48.5 2.99
2.84
2.74
14
1.151 215 190 260 0.026 30.0
950
100L
79.8 80.5 78.8 70.5 61.5 48.5 4.05
3.85
3.71
19
1.536 170 140 240 0.048 39.0
2.2
950
112M
81.8 82.4 81.1 75.0 66.5 53.0 5.45
5.18
4.99
34
2.253 280 255 300 0.071 47.0
960
132S
83.3 84.1 83.2 78.0 71.0 58.0 7.02
6.66
6.42
37
3.041 190 165 300 0.103 59.0
3.7
965
132M
84.3 84.3 82.8 76.0 68.5 55.0 8.78
8.34
8.04
61
3.731 180 180 270 0.131 63.0
5.5
960
132M
84.6 85.6 85.1 79.0 72.5 60.0 9.09
8.64
8.33
53
4.054 210 180 300 0.131 69.0
5.5
7.5
960
132M
86.0 86.9 86.5 79.5 72.5 60.5 12.2
11.6
11.2
78
5.574 230 195 300 0.188 82.0
7.5
10
960
160M
87.2 88.2 87.7 82.0 77.0 66.5 15.9
15.1
14.6
105
7.602 210 195 260 0.363
11
15
965
160L
88.7 89.2 88.6 81.5 76.0 65.0 23.1
22.0
21.2
170
11.09 245 205 300 0.558 140
15
20
975
180L
89.7 90.4 90.2 82.5 77.5 67.5 30.8
29.3
28.2
220
14.97 210 195 300 1.337 203
18.5
25
975
200L
90.4 91.0 90.9 79.5 75.0 65.5 39.1
37.2
35.8
260
18.46 215 195 300 1.604 250
22
30
980
200L
90.9 91.4 91.8 81.0 77.5 68.5 45.4
43.1
41.6
300
21.84 210 180 255 1.912 270
30
40
980
225MC 91.7 92.4 92.2 86.0 83.0 76.0 57.8
54.9
52.9
365
29.79 210 190 285 2.442 335
37
50
980
250MC 92.2 92.3 91.7 86.5 83.0 74.0 70.5
67.0
64.5
455
36.74 210 185 275 3.373 410
45
60
985
280SB 92.7 92.5 91.3 80.5 75.0 64.5 91.6
87.0
83.9
600
44.52 200 185 300 5.290 542
55
75
985
280MB 93.1 93.0 92.1 82.5 78.0 68.0
109
103
99.6
700
54.41 195 185 295 6.492 610
75
100
985
315SB 93.7 93.7 92.8 84.0 80.0 70.0
145
138
133
850
74.20 200 165 240 10.80 850
90
110
125
987
315MB 94.0 94.0 93.1 84.0 81.0 71.0
173
165
159
1070 88.86 200 165 240 12.80 900
(110) (150)
988
315MB 94.3 94.3 93.7 85.0 82.0 73.0
209
198
191
1370 108.5 200 165 250 16.40 1000
110
150
988
315LB 94.3 94.3 93.7 85.0 82.0 73.0
209
198
191
1370 108.5 200 165 250 16.40 1030
132
175
988
315LB 94.6 94.6 94.0 85.0 82.0 73.0
249
237
228
1500 130.2 200 165 250 18.40 1150
(160) (215)
988
315LB 94.8 94.8 94.0 85.0 82.0 74.0
302
287
276
1880 157.8 210 175 250 23.20 1300
160
215
988
355MB 94.8 94.8 94.2 85.5 82.0 73.0
300
285
275
2040 157.8 200 165 250 31.60 1650
(200) (270)
988
315CB 95.0 95.0 94.2 86.0 85.5 82.0
372
353
341
2400 197.3 200 165 250 33.60 1720
200
270
988
355MB 95.0 95.0 94.6 86.0 83.5 76.0
372
353
341
2400 197.3 200 165 250 35.20 1800
(220) (300)
988
315CB 95.0 95.0 94.4 86.5 84.5 78.0
407
386
372
2750 217.0 200 165 250 36.40 1800
220
300
988
355MB 95.0 95.0 94.6 86.0 83.0 75.5
409
389
375
2750 217.0 200 165 250 39.60 1900
(250) (335)
988
315DB 95.0 95.0 94.6 86.5 84.0 77.0
462
439
423
3000 246.6 200 165 250 42.00 1900
250
335
988
355LB 95.0 95.0 94.6 86.0 83.0 75.5
465
442
426
3060 246.6 200 165 250 44.40 2080
315
420
988
355CB 95.2 95.2 94.8 87.0 85.0 78.0
578
549
529
3700 310.7 200 165 250 55.60 2650
Note:
12
Performance
IE 3
Performance Data
13
Performance
OUTPUT
EFFICIENCY
FULL
FRAME FULL
LOAD
LOAD
3/4
LOAD
1/2
LOAD
CURRENT
POWER FACTOR
FULL
LOAD
3/4
LOAD
1/2
LOAD
FULL LOAD (A)
TORQUE
LRC
FULL
LOCKED
BREAK-
ROTOR
APPROX.
kW
HP
0.75
2875
80M
380
80.7 78.3 75.1 84.5 78.0 66.5 1.67
400
1.59
ROTOR PULL-UP DOWN

WEIGHT
GD
LOAD
(A)
415 400V kg-m %FLT %FLT %FLT kg-m2 kg
1.53 12 0.254 280 275 335 0.006 18.0
1.1
1.5
2870
80M
82.7 83.0 81.3 85.0 78.5 66.5 2.38
2.26
2.18
18
0.373 300 295 350 0.007 19.5
1.5
2850
90S
84.2 85.4 85.8 90.5 87.0 78.0 2.99
2.84
2.74
22
0.512 220 210 300 0.012 25.5
2.2
2860
90L
85.9 86.7 86.8 89.5 85.0 75.5 4.35
4.13
3.98
35
0.748 245 235 315 0.014 29.0
2855
100L
87.1 88.3 88.4 90.0 86.5 78.5 5.81
5.52
5.32
48
1.022 325 310 355 0.025 41.5
3.7
2870
112M
87.8 88.2 88.0 90.5 87.5 80.0 7.07
6.72
6.48
60
1.254 290 270 345 0.046 51.5
5.5
2875
112M
88.1 89.0 88.9 91.0 87.5 80.0 7.58
7.20
6.94
69
1.354 270 250 360 0.046 51.5
5.5
7.5
2930
132S
89.2 89.8 89.5 88.5 86.0 79.5 10.6
10.1
9.69
80
1.826 210 205 340 0.075 73.0
7.5
10
2920
132S
90.1 90.9 90.8 87.0 84.5 77.5 14.5
13.8
13.3
100
2.499 210 195 315 0.081 76.0
11
15
2935
160M
91.2 92.0 92.0 90.0 89.0 83.5 20.4
19.3
18.6
150
3.647 230 185 300 0.183 130
15
20
2935
160M
91.9 92.0 92.0 89.0 85.5 77.5 27.9
26.5
25.5
230
4.973 275 230 330 0.205 130
18.5
25
2930
160L
92.4 93.0 93.0 90.0 89.5 84.0 33.8
32.1
30.9
260
6.144 245 200 300 0.237 140
22
30
2940
180M
92.7 92.7 92.5 87.0 85.0 77.0 41.4
39.4
38.0
300
7.281 225 180 300 0.283 180
30
40
2950
200L
93.3 93.5 92.5 90.0 90.0 86.5 54.3
51.6
49.7
400
9.895 200 145 300 0.602 265
37
50
2955
200L
93.7 94.5 94.0 91.0 90.5 87.0 65.9
62.6
60.4
510
12.18 210 145 300 0.753 300
45
60
2960 225MA 94.0 94.0 93.5 91.0 91.0 88.0 79.9
75.9
73.2
615
14.79 170 140 300 1.187 340
55
75
2970 250MA 94.3 94.5 94.0 91.5 90.0 86.5 96.8
92.0
88.7
735
18.02 165 130 315 1.544 465
75
100
2970
280SA 94.7 94.6 93.6 81.5 77.0 66.5 148
140
135
1090 24.61 155 135 300 1.935 553
90
125
2970 280MA 95.0 95.0 94.0 90.5 90.0 82.5
159
151
146
1255 29.53 150 135 285 2.463 620
110
150
2972
315SA 95.2 95.0 94.0 90.0 89.0 85.0 195
185
179
1400 36.07 200 165 240 4.000 900
132
175
2972 315MA 95.4 95.3 94.5 90.5 89.5 87.0
232
221
213
1650 43.28 200 165 240 4.800 960
(160) (215) 2975 315MA 95.6 95.5 94.8 91.0 90.0 86.5 279
265
256
2140 52.41 200 165 250 5.200 1000
160
215
2975
315LA 95.6 95.5 94.8 91.0 90.0 86.5 279
265
256
2140 52.41 200 165 250 5.200 1030
200
270
2975
315LA 95.8 95.8 95.2 91.5 90.5 87.5 347
329
317
2450 65.51 200 165 250 7.200 1160
(220) (300) 2975 315CA 95.8 95.6 95.0 90.0 88.5 83.5 388
368
355
2750 72.06 180 150 230 8.400 1520
220
381
362
349
2810 72.06 140 120 280 12.40 1750
(250) (335) 2975 315CA 95.8 95.6 95.0 91.0 89.5 85.5 436
414
399
3000 81.89 180 150 235 10.00 1660
250
431
409
395
3000 81.89 140 120 280 13.60 1820
(315) (420) 2975 315DA 95.8 95.6 95.0 91.0 90.0 86.0 549
522
503
3900 103.2 180 150 240 11.20 1800
315
420
2978
516
497
3900 103.1 140 120 280 14.40 2150
375
500
2978 355CA 95.8 95.6 94.7 92.5 91.0 87.0
611
589
4500 122.7 150 125 280 16.00 2500
300
335
rpm
SIZE
(%)
(%)
(%)
(%)
(%)
VOLTAGE
(%)
2975 355MA 95.8 95.4 94.2 91.5 90.0 85.0

2975 355MA 95.8 95.5 94.5 92.0 91.0 87.0
355LA 95.8 95.5 94.5 92.0 91.0 87.0 543

643
Note:
14
Performance
OUTPUT
kW
0.55
HP
EFFICIENCY
FULL
LOAD
rpm
0.75 1430
FRAME
SIZE
CURRENT
POWER FACTOR
FULL
LOAD
3/4
LOAD
1/2
LOAD
FULL
LOAD
3/4
LOAD
1/2
LOAD
(%)
(%)
(%)
(%)
(%)
(%)
TORQUE
FULL LOAD (A)
LRC
VOLTAGE
(A)
380
400
415
80M
80.8 77.9 74.7 69.0 58.5 44.5 1.50
1.42
1.37
FULL
LOAD
BREAKLOCKED
ROTOR PULL-UP DOWN
ROTOR
GD2
APPROX.
WEIGHT
400V kg-m
%FLT %FLT %FLT
kg-m2
kg
9.0
0.374 300 270 320 0.010 17.5
0.75
1410
80M
82.5 81.8 79.7 73.5 64.0 50.0 1.88
1.79
1.72
11
0.518 315 290 335 0.013 20.5
1.1
1.5
1430
90S
84.1 84.4 83.2 79.5 71.5 57.5 2.50
2.37
2.29
17
0.748 255 205 300 0.019 26.5
1.5
1435
90L
85.3 84.1 82.2 75.0 65.5 51.5 3.56
3.38
3.26
26
1.017 300 235 335 0.023 28.5
2.2
1450
100L
86.7 87.3 86.9 81.0 73.5 60.5 4.76
4.52
4.36
33
1.476 210 160 300 0.045 39.5
1455
100L
87.7 87.7 86.2 78.0 70.5 57.5 6.66
6.33
6.10
49
2.006 250 240 335 0.052 42.0
3.7
1445
112M
88.4 89.1 88.8 82.0 77.0 66.0 7.76
7.37
7.10
60
2.491 235 200 305 0.083 53.0
5.5
1445
112M
88.6 88.4 87.9 82.0 76.5 65.5 8.37
7.95
7.66
57
2.693 245 205 300 0.083 53.0
5.5
7.5
1455
132S
89.6 90.4 90.3 85.0 80.5 70.0 11.0
10.4
10.0
77
3.678 240 200 300 0.132 75.5
7.5
10
1460
132M
90.4 90.8 90.4 84.5 79.5 69.0 14.9
14.2
13.7
110
4.998 270 225 330 0.172 93.0
11
15
1460
160M
91.4 92.0 91.5 84.0 80.0 70.0 21.8
20.7
19.9
160
7.331 230 185 300 0.366 130
15
20
1460
160L
92.1 92.5 92.5 84.5 81.0 71.0 29.3
27.8
26.8
225
9.997 250 195 300 0.460 150
18.5
25
1475
180M
92.6 94.0 93.0 81.5 77.0 69.5 37.2
35.4
34.1
270
12.20 215 160 280 0.704 195
22
30
1475
180L
93.0 93.5 93.0 81.0 77.0 71.0 44.4
42.2
40.6
315
14.51 210 145 275 0.789 205
30
40
1470
200L
93.6 94.5 94.5 86.0 84.5 77.0 56.6
53.8
51.8
445
19.86 250 205 300 1.451 285
37
50
1480 225SC 93.9 94.5 94.0 85.5 82.0 73.0 70.0
66.5
64.1
505
24.33 210 175 300 1.896 350
45
60
1480 225MC 94.2 94.5 94.0 84.5 79.5 70.0 85.9
81.6
78.6
600
29.58 210 175 300 1.979 360
55
75
1485 250MC 94.6 94.6 94.0 87.5 84.5 77.0
101
95.9
92.4
750
36.04 210 185 295 3.911 480
75
100
1480 280SB 95.0 95.0 94.5 85.0 82.0 73.0
141
134
129
1030 49.38 160 150 300 5.033 621
90
125
1480 280MB 95.2 95.2 94.7 84.0 80.0 70.5
171
162
157
1260 59.26 175 165 300 6.112 706
110
150
1484 315SB 95.4 95.4 95.0 89.0 87.0 80.5
197
187
180
1400 72.23 200 165 270 9.200 920
132
175
1484 315MB 95.6 95.6 95.2 89.0 87.5 82.0
236
224
216
1650 86.68 200 165 270 10.40 1000
(160) (215) 1485 315MB 95.8 95.8 95.5 89.5 88.0 82.0
284
269
260
2000 105.0 200 165 260 11.60 1040
160
215
1485 315LB 95.8 95.8 95.5 89.5 88.0 82.0
284
269
260
2000 105.0 200 165 260 11.60 1070
200
270
1485 315LB 96.0 96.0 95.8 90.0 89.0 84.5
352
334
322
2500 131.2 200 165 260 14.00 1260
(220) (300) 1488 315CB 96.0 95.9 95.2 86.0 82.0 72.0
405
385
371
2800 144.1 200 165 260 24.00 1550
220
1487 355MB 96.0 96.0 95.4 88.8 86.2 79.0
392
372
359
2750 144.2 180 150 260 22.80 1750
(250) (335) 1488 315CB 96.0 96.0 95.4 86.5 83.5 75.0
457
435
419
3100 163.7 200 165 260 26.00 1700
250
1487 355MB 96.0 95.8 95.2 88.8 86.2 78.2
446
423
408
3280 163.8 200 165 270 27.20 1820
(315) (420) 1488 315DB 96.0 96.0 95.5 86.5 83.5 75.0
576
548
528
3900 206.3 200 165 260 29.20 1940
315
420
1488 355LB 96.0 96.0 95.5 89.5 87.5 81.0
557
529
510
3900 206.3 200 165 270 31.20 2150
375
500
1488 355CB 96.0 96.0 95.5 89.5 87.0 81.0
663
630
607
4570 245.6 200 165 270 35.60 2500
Note:
300
335
15
Performance
OUTPUT
EFFICIENCY
FULL
LOAD
kW
HP
0.55
0.75
905
0.75
1.1
1.5
1.5
rpm
FRAME
SIZE
CURRENT
POWER FACTOR
FULL
LOAD
3/4
LOAD
1/2
LOAD
FULL
LOAD
3/4
LOAD
1/2
LOAD
(%)
(%)
(%)
(%)
(%)
(%)
FULL LOAD (A)

VOLTAGE
TORQUE
LRC
FULL
LOAD
(A)
400V kg-m
BREAKLOCKED
ROTOR PULL-UP DOWN
ROTOR
GD2
APPROX.
WEIGHT
%FLT %FLT %FLT
kg-m2
kg
380
400
415
80M
77.2 69.7 66.2 69.0 58.0 44.5 1.57
1.49
1.44
6.0
0.591 210 195 250 0.012 19.5
935
90S
78.9 80.6 79.4 71.0 62.5 49.0 2.03
1.93
1.86
9.0
0.780 210 190 250 0.022 28.0
930
90L
81.0 81.2 80.5 72.0 63.5 50.0 2.87
2.72
2.62
13
1.151 210 185 240 0.026 30.5
950
100L
82.5 82.9 81.5 72.5 65.0 52.0 3.81
3.62
3.49
18
1.536 210 175 250 0.058 43.5
2.2
960
112M
84.3 84.3 82.2 67.0 59.0 47.0 5.92
5.62
5.42
29
2.230 190 180 280 0.083 53.5
970
132S
85.6 86.1 85.1 76.0 69.0 58.5 7.01
6.66
6.42
41
3.009 195 170 300 0.137 75.0
3.7
965
132M
86.5 87.5 87.0 77.0 70.0 58.0 8.44
8.02
7.73
56
3.731 200 185 275 0.143 77.0
5.5
970
132M
86.8 87.0 85.6 77.0 70.0 57.5 9.09
8.64
8.33
58
4.012 200 185 310 0.182 84.0
5.5
7.5
970
132M
88.0 88.5 87.6 79.5 72.5 60.0 11.9
11.3
10.9
88
5.517 210 205 300 0.216 91.0
7.5
10
970
160M
89.1 90.0 89.0 79.0 73.0 61.0 16.2
15.4
14.8
110
7.523 235 210 300 0.483 135
11
15
970
160L
90.3 91.0 90.5 78.0 72.0 60.5 23.7
22.5
21.7
170
11.03 295 255 300 0.628 150
15
20
970
180L
91.2 92.0 92.0 82.0 78.0 68.0 30.5
29.0
27.9
200
15.05 215 165 255 1.337 205
18.5
25
975
200L
91.7 92.5 92.5 80.5 76.0 66.5 38.1
36.2
34.9
260
18.46 220 185 265 1.829 270
22
30
975
200L
92.2 93.0 93.5 81.5 77.0 68.0 44.5
42.3
40.7
305
21.95 210 185 265 2.078 290
30
40
980
225MC 92.9 93.5 93.5 83.5 80.0 76.5 58.8
55.8
53.8
335
29.79 210 160 240 3.023 385
37
50
980
250MC 93.3 94.0 94.0 85.0 81.5 75.0 70.9
67.3
64.9
490
36.74 230 200 280 4.194 460
45
60
985
280SB 93.7 93.7 93.0 81.5 77.5 67.5 89.5
85.1
82.0
587
44.52 185 175 285 5.530 561
55
75
985
280MB 94.1 94.1 93.5 83.0 80.0 71.0
107
102
98.0
700
54.41 185 175 300 6.733 635
75
100
987
315SB 94.6 94.6 94.1 85.5 82.5 74.5
141
134
129
930
74.05 200 165 240 12.80 900
90
125
987
315MB 94.9 94.9 94.5 85.5 83.0 75.5
169
160
154
1200 88.86 200 165 240 15.20 960
(110) (150)
988
315MB 95.1 95.1 94.7 85.5 83.0 75.5
206
195
188
1400 108.5 200 165 240 18.40 1060
110
150
988
315LB 95.1 95.1 94.7 85.5 83.0 75.5
206
195
188
1400 108.5 200 165 240 18.40 1090
132
175
988
315LB 95.4 95.4 95.0 85.5 83.0 75.5
246
234
225
1650 130.2 200 165 240 20.40 1250
(160) (215)
988
315LB 95.6 95.6 95.2 85.0 82.0 74.0
299
284
274
2000 157.8 200 165 250 23.20 1320
160
215
988
355MB 95.6 95.6 95.2 85.5 82.0 73.0
297
283
272
2000 157.8 170 145 250 33.20 1750
(200) (270)
988
315CB 95.8 95.8 95.2 86.0 83.0 74.5
369
350
338
2500 197.3 170 145 250 33.20 1800
200
270
988
355MB 95.8 95.8 95.4 86.0 82.5 74.0
369
350
338
2400 197.3 170 145 250 40.40 1950
(220) (300)
988
315CB 95.8 95.8 95.4 86.5 84.0 76.0
403
383
369
2800 217.0 170 145 250 37.60 1900
220
300
988
355MB 95.8 95.8 95.5 86.5 83.5 76.0
403
383
369
2700 217.0 170 145 250 44.00 2020
(250) (335)
988
315DB 95.8 95.8 95.4 86.5 83.5 75.0
458
435
420
3250 246.6 170 145 250 42.00 1940
250
335
988
355LB 95.8 95.8 95.5 86.8 84.0 76.5
457
434
418
3060 246.6 170 145 250 49.60 2200
315
420
988
355CB 95.8 95.8 95.5 87.0 85.0 78.0
574
546
526
3700 310.7 170 145 250 60.40 2800
Note:
16
Dimensions
B3
B3 Outline Dimension
Foot Mounted(B3)
Motor Type: AESV1S / AESV2S / AESV3S
Frame Size: 80M to 225M
Output (kW)
FRAME FIG.
SIZE NO
AA AB AC
AD
AG
AS
B'
BA
BA'
BB
BC
BE
125 34.5 161 177
148
109
54.5
100
---
---
---
137
18.5
35
50
90S
140
40
180 197
158
109
54.5
100
---
---
---
161
36
35
56
90L
140
40
180 197
158
109
54.5
125 100
---
---
186
36
35
56
100L
160
40
200 219
185.5
125
62.5
140
---
---
---
181
21
40
63
190
45
235 235
193
125
62.5
140
---
---
---
186
28
40
70
132S
216
57
263 273
210.5
125
62.5
140
---
---
---
184
40
89
132M
216
57
263 273
210.5
125
62.5
178 140
---
---
222
40
89
7.5
3.7
4
5.5
160M
254
60
300 317
240.5
166
83
210
57.5
57.5
256
47
60
108
15
18.5
22
11
--15
7.5
--11
254
60
300 317
240.5
166
83
254 210 57.5
101.5
300
47
60
108
180M
279
65
330 354
266.5
166
83
241
---
62
62
292
39
60
121
180L
279
65
330 354
266.5
166
83
279 241
62
100
330
39
60
121
30
37
30
18.5
22
15
200L
318
70
378 398
332
231
110.5
305
---
76
76
365
60
106 133
---
37
---
18.5
225SC
356
75
431 449
358
231
110.5
286
---
90
90
350
37.5 106 149
45
---
--45
--30
--22
225MA
356
75
431 449
358
231
110.5
311 286
90
115
375
37.5 106 149
225MC
356
75
431 449
358
231
110.5
311 286
90
115
375
37.5 106 149
2P
4P
6P
8P
0.75
1.1
0.55
0.75
0.55
0.18
80M
1.5
2.2
1.1
1.5
0.75
1.1
0.37
0.55
1.5
0.75
1.1
2.2
1.5
112M
5.5
2.2
---
7.5
3.7
4
5.5
11
15
11
18.5
22
---
3
3.7
4
5.5
7.5
Note:
2.2
3
3.7
4
160L
1. All dimensions are in mm.

2. Pre-packed shielded ball bearing for frame size 80M to 225M
3. Dual Eye-bolts provided for frame 90S to 355C
4. Data are subject to change without prior notice
17
---
Dimensions
B3
Foot Mounted(B3)
FRAME
SIZE
HA
HE
LL
UB
80M
80
10
115
10
293
109
40
90S
90
10
125
10
344.5
109
90L
90
10
125
10
369.5
100L
100 12
146
12
112M
112 13
153.5
132S
132 16
132M
SHAFT EXTENSION
G
BEARING
EB EF EG
GA DB DRIVE END
M20x1.5
19
40
32
16
40
M20x1.5
24
50
40
19
20
27
M8
109
40
M20x1.5
24
50
40
19
20
27
M8
392
125
50
M25X1.5
28
60
50
22
24
31
12
412.5
125
50
M25X1.5
28
60
50
22
24
171
12
466
125
50
M25x1.5
38
80
70
28
10
132 16
171
12
504
125
50
M25x1.5
38
80
70
28
160M
160 18
198
14.5
608
158
60
M32x1.5
42
110 100
15.5 21.5
M6
OPPOSITE
DRIVE END
6204ZZC3
6204ZZC3
6205ZZC3
6205ZZC3
M10
6206ZZC3
6206ZZC3
31
M10
6306ZZC3
6306ZZC3
33
41
M12
6308ZZC3
6306ZZC3
10
33
41
M12
36
12
37
45
M16
6309ZZC3
6307ZZC3
37
45
M16
6311ZZC3
6310ZZC3
160L
160 18
198
14.5
652
158
60
M32x1.5
42
110 100
36
12
180M
180 20
224
14.5
672
158
70
M32x1.5
48
110 100
36
14 42.5 51.5 M16
180L
180 20
224
14.5
710
158
70
M32x1.5
48
110 100
36
14 42.5 51.5 M16
200L
200 24
262
18.5
770
231
80
M50x1.5
55
110 100
42
16
49
59
M20
6312ZZC3
6212ZZC3
225SC 225 28
288
18.5
816
231
90
M50x1.5
60
140 125
7.5
42
18
53
64
M20
6313ZZC3
6313ZZC3
225MA 225 28
288
18.5
811
231
90
M50x1.5
55
110 100
42
16
49
59
M20
6312ZZC3
6312ZZC3
225MC 225 28
288
18.5
841
231
90
M50x1.5
60
140 125
7.5
42
18
53
64
M20
6313ZZC3
6313ZZC3
Note:

2. Tolerance of shaft end diameter D: 1) 19~28:j6, 2) 38~48:k6, 3) 55~65:m6
3. Tolerance of shaft center high H : +0, -0.5
18
Dimensions
B3
Foot Mounted(B3)
Frame Size: 250 M to 355C
Output (kW)
FRAME FIG.
SIZE NO
AA AB AC
AD
AG
AS
B'
BA
BA'
BB
BC
BE
406
85
480 499
400
255
122.5
349
---
105
105
425
57.5
119 168
406
85
480 499
400
255
122.5
349
---
105
105
425
57.5
119 168
280SA
457 110 560 546
433
255
122.5
368
---
110
110
445
48
119 190
280SB
457 110 560 546
433
255
122.5
368
---
110
110
445
48
119 190
280MA
457 110 560 546
433
255
122.5
419
---
130
137
495
48
119 190
280MB
457 110 560 546
433
255
122.5
419
---
130
137
495
48
119 190
315SA
508 115 615 620
527.5
336
163
406
---
210
210
620
53
140 216
315SB
508 115 615 620
527.5
336
163
406
---
210
210
620
53
140 216
---
315MA
508 115 615 620
527.5
336
163
457
---
240
240
670
53
140 216
90
(110)
75
315MB
508 115 615 620
527.5
336
163
457
---
240
240
670
53
140 216
---
---
---
315LA
508 130 630 620
527.5
336
163
508
---
230
230
770
53
140 216
---
160
200
110
132
(160)
90
110
315LB
508 130 630 620
527.5
336
163
508
---
230
230
770
53
140 216
(220)
(250)
---
---
---
315CA
508 150 650 682
590
412
189
710
---
335
335
900
68
180 216
(200)
(220)
---
508 150 650 682
590
412
189
710
---
335
335
900
68
180 216
315DA
508 150 650 682
590
412
189
900
---
180
250
1060
68
180 216
---
(315)
(250)
(132)
(160)
--(200)
(220)
315CB
(315)
(220)
(250)
---
315DB
508 150 650 682
590
412
189
900
---
180
250
1060
68
180 216
220
250
---
---
---
355MA
610 150 750 810
645
412
189
---
560
330
330
910
48
180 254
---
220
250
160
200
220
132
160
355MB
610 150 750 810
645
412
189
---
560
330
330
910
48
180 254
315
---
---
---
355LA
610 150 750 810
645
412
189
630
---
330
330
910
48
180 254
200
220
355LB
610 150 750 810
645
412
189
630
---
330
330
910
48
180 254
---
355CA
610 150 750 810
645
412
189
710
---
390
390
1100
48
180 254
250
355CB
610 150 750 810
645
412
189
710
---
390
390
1100
48
180 254
2P
4P
6P
8P
55
--75
--90
--110
---
--55
--75
--90
--110
--37
--45
--55
--75
--30
--37
--45
--55
132
(160)
---
---
---
132
(160)
160
200
---
---
315
250
375
---
--375
--315
Note:
250MA
250MC

2. Open type ball bearing for frame size 250M to 355C
4. Output in ( ) is for optional frame size upon request
19
Dimensions
B3
FRAME
SIZE
Foot Mounted(B3)
Frame Size: 250M to 355C
HA
HE
LL
UB
SHAFT EXTENSION
D
EB EF EG
BEARING
GA DB DRIVE END
OPPOSITE
DRIVE END
250MA 250 30
322
24
921
255 105 M63x1.5
60
140 125 7.5
42
18
53
64
M20
6313C3
6313C3
250MC 250 30
322
24
921
255 105 M63x1.5
65
140 125 7.5
42
18
58
69
M20
6315C3
6313C3
280SA 280 35
354.5
24
1037.5
255 140 M63X1.5
65
140 125 7.5
40
18
58
69
M20
6314C3
6314C3
280SB 280 35
354.5
24
1037.5
255 140 M63X1.5
75
140 125 7.5
40
20 67.5 79.5 M20
6318C3
6316C3
280MA 280 35
354.5
24
1087.5
255 140 M63X1.5
65
140 125 7.5
40
18
M20
6314C3
6314C3
280MB 280 35
354.5
24
1087.5
255 140 M63X1.5
75
140 125 7.5
40
20 67.5 79.5 M20
6318C3
6316C3
315SA 315 35
430
28
1216
322 180 M63X1.5
65
140 125 7.5
40
18
58
69
M20
6316C3
6314C3
315SB 315 35
430
28
1246
322 180 M63X1.5
80
170 160
40
22
71
85
M20
6320C3
6316C3
315MA 315 35
430
28
1266
322 180 M63X1.5
65
140 125 7.5
40
18
58
69
M20
6316C3
6314C3
315MB 315 35
430
28
1296
322 180 M63X1.5
80
170 160
40
22
71
85
M20
6320C3
6316C3
315LA
315 45
430
28
1366
322 180 M63X1.5
65
140 125 7.5
40
18
58
69
M20
6316C3
6314C3
315LB
315 45
430
28
1396
322 180 M63X1.5
80
170 160
40
22
71
85
M20
6320C3
6316C3
315CA 315 45
485
28
1484
372 200
M72X2
75
140 125 7.5
40
20 67.5 79.5 M20
6316C3
6316C3
315CB 315 45
485
28
1514
372 200
M72X2
95
170 160
48
25
100 M24
6322C3
6322C3
315DA 315 45
485
28
1674
372 200
M72X2
75
140 125 7.5
40
20 67.5 79.5 M20
6316C3
6316C3
315DB 315 45
485
28
1704
372 200
M72X2
95
170 160
48
25
86
100 M24
6322C3
6322C3
355MA 355 45
540
28
1605
372 230
M72X2
80
170 140
40
22
71
85
M20
6318C3
6318C3
355MB 355 45
540
28
1645
372 230
M72X2
100 210 180
48
28
90
106 M24
6322C3
6322C3
355LA
355 45
540
28
1605
372 230
M72X2
80
170 140
40
22
71
85
M20
6318C3
6318C3
355LB
355 45
540
28
1645
372 230
M72X2
100 210 180
48
28
90
106 M24
6322C3
6322C3
355CA 355 45
540
28
1795
372 230
M72X2
80
170 140
40
22
71
85
M20
6318C3
6318C3
355CB 355 45
540
28
1835
372 230
M72X2
100 210 180
48
28
90
106 M24
6322C3
6322C3
58
86
69
Note:

2. Tolerance of shaft end diameter D: 1) 55~100:m6
3. Tolerance of shaft center high H : 1) 80~250: +0, -0.5, 2) 280~355: +0, -1
20
Dimensions
V1
V1 Outline Dimension
Flange Mounted(V1)
Motor Type: AESU1S / AESU2S / AESU3S
Output (kW)
FRAME FIG.
SIZE NO LA
AC
AD
AG
AS
BE
HE
3.5
177
148
109
54.5
35
115
12
3.5
271
158
109
54.5
35
125
12
3.5
271
158
109
54.5
35
125
250
14.5
288.5 185.5
125
62.5
40
146
180
250
14.5
306.5
193
125
62.5
40
153.5
265
230
300
14.5
360
210.5
125
62.5
40
171
80
265
230
300
14.5
360
210.5
125
62.5
40
171
15
110
300
250
350
18.5
427
240.5
166
83
60
198
15
110
300
250
350
18.5
427
240.5
166
83
60
198
15
110
300
250
350
18.5
476
266.5
166
83
60
224
15
110
300
250
350
18.5
476
266.5
166
83
60
224
17
110
350
300
400
18.5
524
332
231
110.5
106
262
20
140
400
350
450
18.5
574
358
231
110.5
106
288
20
110
400
350
450
18.5
574
358
231
110.5
106
288
20
140
400
350
450
18.5
574
358
231
110.5
106
288
LE
12
40
165
130
200
12
90S
90L
12
50
165
130
200
12
50
165
130
200
1.5
0.75
1.1
100L
16
60
215
180
2.2
1.5
112M
15
60
215
5.5
2.2
132S
16
80
---
7.5
3.7
4
5.5
132M
16
11
15
11
7.5
3.7
4
5.5
160M
11
--15
7.5
--11
160L
180M
180L
15
200L
2P
4P
0.75
1.1
0.55
0.75
0.55 0.18
80M
1.5
2.2
1.1
1.5
0.75 0.37
1.1 0.55
2.2
3
3.7
4
3
3.7
4
5.5
7.5
18.5 15
22 18.5
--22
Note:
FLANGE DIMENSION
6P
30
37
30
18.5
22
--45
---
37
--45
----30
8P
18.5 225SC
--- 225MA
22 225MC

2. Tolerance of N: 130~450: j6
4. Dual Eye-bolts provided for frame 90S to 355L
21
Dimensions
V1
Flange Mounted(V1)
FRAME
SIZE
HH
LL
UB
80M
68.5
293
109
40
90S
90L
92
344.5
109
92
369.5
109
100L
84
392
112M
98
132S
SHAFT EXTENSION
BEARING
EB EF EG
GA
DB DRIVE END
M20X1.5
19
40
32
16
15.5
21.5
M6
40
M20X1.5
24
50
40
19
20
27
M8
40
M20X1.5
24
50
40
19
20
27
M8
125
50
M25X1.5
28
60
50
22
24
31
412.5
125
50
M25X1.5
28
60
50
22
24
95
466
125
50
M25X1.5
38
80
70
28
10
132M
95
504
125
50
M25X1.5
38
80
70
28
160M
155
608
158
60
M32x 1.5
42 110 100
160L
180M
180L
155
652
158
60
M32x 1.5
42 110 100
160
672
158
70
M32x 1.5
48 110 100
160
710
158
70
M32x 1.5
200L
193
770
231
80
225SC
186.5
816
231
225MA 186.5
225MC 186.5
811
231
841
231
OPPOSITE
DRIVE END
6204ZZC3
6204ZZC3
6205ZZC3
6205ZZC3
M10
6206ZZC3
6206ZZC3
31
M10
6306ZZC3
6306ZZC3
33
41
M12
6308ZZC3
6306ZZC3
10
33
41
M12
36
12
37
45
M16
6309ZZC3
6307ZZC3
36
12
37
45
M16
36
14
42.5
51.5
M16
48 110 100
36
14
42.5
51.5
M16
6311ZZC3
6310ZZC3
M50x 1.5
55 110 100
42
16
49
59
M20
6312ZZC3
6212ZZC3
90
M50 x 1.5
60 140 125 7.5
42
18
53
64
M20
6313ZZC3
6313ZZC3
90
M50 x 1.5
55 110 100
42
16
49
59
M20
6312ZZC3
6312ZZC3
90
M50 x 1.5
60 140 125 7.5
42
18
53
64
M20
6313ZZC3
6313ZZC3
Note:

22
Dimensions
V1
Flange Mounted(V1)
Frame Size: 250M to 355L
Output (kW)
2P
4P
6P
8P
FRAME FIG.
SIZE NO LA
55
--75
--90
--110
---
--55
--75
--90
--110
--37
--45
--55
--75
--30
--37
--45
--55
250MA
250MC
280SA
280SB
280MA
280MB
315SA
315SB
132
(160)
---
---
---
315MA
75
315MB
---
160
132
200 (160)
220
250
---
--315
--160
200
AC
AD
AG
AS
BE
HE
642
400
255
122.5
119
322
18.5
642
400
255
122.5
119
322
18.5
713
433
255
122.5
119
354.5
550
18.5
713
433
255
122.5
119
354.5
550
18.5
713
433
255
122.5
119
354.5
450
550
18.5
713
433
255
122.5
119
354.5
550
660
24
660
527
336
163
140
430
600
550
660
24
660
527
336
163
140
430
140
600
550
660
24
660
527
336
163
140
430
25
170
600
550
660
24
660
527
336
163
140
430
315LA
25
140
600
550
660
24
660
527
336
163
140
430
90
110
315LB
25
170
600
550
660
24
660
527
336
163
140
430
---
---
355MA
30
170
740
680
800
24
980
645
412
189
180
540
220
250
160
200
220
132
160
355MB
30
210
740
680
800
24
980
645
412
189
180
540
---
---
---
355LA
30
170
740
680
800
24
980
645
412
189
180
540
250
200
220
355LB
30
210
740
680
800
24
980
645
412
189
180
540
132
90
(160) (110)
---
--110
---
---
Note:
FLANGE DIMENSION
315
LE
22
140
500
450
550
18.5
22
140
500
450
550
22
140
500
450
550
22
140
500
450
22
140
500
450
22
140
500
25
140
600
25
170
25

2. Tolerance of N: 130~450: j6 , 550~680: js6
3. Open type ball bearing for frame size 250M to 355L
5. Dual Eye-bolts provided for frame 90S to 355L
23
Dimensions
V1
FRAME
SIZE
Flange Mounted(B3)
Frame Size: 250M to 355L
HH
250MA 225.5
250MC 225.5
280SA 238
280SB 238
280MA 238
280MB 238
315SA 269
315SB 269
SHAFT EXTENSION
LL
UB
921
255
105
M63 x 1.5
60 140 125 7.5
EB EF EG
BEARING
OPPOSITE
DRIVE END
GA
DB DRIVE END
42
18
53
64
M20
6313C3
6313C3
921
255
105
M63 x 1.5
65 140 125 7.5
42
18
58
69
M20
6315C3
6313C3
1037.5
255
140
M63X1.5
65 140 125 7.5
40
18
58
69
M20
6314C3
6314C3
1037.5
255
140
M63X1.5
75 140 125 7.5
40
20
67.5
79.5
M20
6318C3
6316C3
1087.5
255
140
M63X1.5
65 140 125 7.5
40
18
58
69
M20
6314C3
6314C3
1087.5
255
140
M63X1.5
75 140 125 7.5
40
20
67.5
79.5
M20
6318C3
6316C3
1216
322
180
M63X1.5
65 140 125 7.5
40
18
58
69
M20
6316C3
7314C3
1246
322
180
M63X1.5
80 170 160
40
22
71
85
M20
6320C3
7316C3
315MA
269
1266
322
180
M63X1.5
65 140 125 7.5
40
18
58
69
M20
6316C3
7314C3
315MB
269
1296
322
180
M63X1.5
80 170 160
40
22
71
85
M20
6320C3
7316C3
315LA
269
1366
322
180
M63X1.5
65 140 125 7.5
40
18
58
69
M20
6316C3
7314C3
315LB
269
1396
322
180
M63X1.5
80 170 160
40
22
71
85
M20
6320C3
7316C3
355MA
302
1605
372
230
M72X2
80 170 140
40
22
71
85
M20
6318C3
7318C3
355MB
302
1645
372
230
M72X2
100 210 180
48
28
90
106
M24
6322C3
7322C3
355LA
302
1605
372
230
M72X2
80 170 140
40
22
71
85
M20
6318C3
7318C3
355LB
302
1645
372
230
M72X2
100 210 180
48
28
90
106
M24
6322C3
7322C3
Note:

24
Dimensions
B35
Foot & Flange Mounted(B35)

Motor Type: AESV1S-LA / AESV2S-LA / AESV3S-LA
Output (kW)
2P
4P
6P
FLANGE DIMENSION
FRAME FIG.
8P SIZE NO LA LE M N P S T
0.75 0.55
0.55 0.18
1.1 0.75
1.5
2.2
1.1 0.75 0.37

1.5 1.1 0.55
80M
A AA AB AC AD AG AS
B' BA BA' BB
12 40 165 130 200 12 3.5 125 34.5 161 177 148 109 54.5
100
---
---
---
137
90S
12 50 165 130 200 12 3.5 140 40 180 197 158 109 54.5
100
---
---
---
161
90L
12 50 165 130 200 12 3.5 140 40 180 197 158 109 54.5
125 100
---
---
186
1.5
0.75
1.1
100L
16 60 215 180 250 14.5 4 160 40 200 219 185.5 125 62.5
140
---
---
---
181
2.2
1.5
112M
15 60 215 180 250 14.5 4 190 45 235 235 193 125 62.5
140
---
---
---
186
5.5
2.2
132S
16 80 265 230 300 14.5 4 216 57 263 273 210.5 125 62.5
140
---
---
---
184
---
7.5
3.7
4
5.5
132M
16 80 265 230 300 14.5 4 216 57 263 273 210.5 125 62.5
178 140
---
---
222
11
15
11
7.5
3.7
4
5.5
160M
15 110 300 250 350 18.5 5 254 60 300 317 240.5 166
83
210
18.5 15 11
22 18.5 ----- 22 15
7.5
--11
15 110 300 250 350 18.5 5 254 60 300 317 240.5 166
83
254 210 57.5 101.5 300
180M
15 110 300 250 350 18.5 5 279 65 330 354 266.5 166
83
241
---
62
62
292
180L
15 110 300 250 350 18.5 5 279 65 330 354 266.5 166
83
279 241
62
100
330
15
200L
17 110 350 300 400 18.5 5 318 70 378 398 332 231 110.5 305 ---
76
76
365
90
20 110 400 350 450 18.5 5 356 75 431 449 358 231 110.5 311 286 90
90
350
115
375
20 140 400 350 450 18.5 5 356 75 431 449 358 231 110.5 311 286 90
115
375
3
3.7
4
5.5
7.5
2.2
3
3.7
4
30
37
30
--45
---
37
--45
Note:
18.5
22
160L
--- 18.5 225SC

--- --- 225MA
30 22 225MC
20 140 400 350 450 18.5 5 356 75 431 449 358 231 110.5 286 ---

2. Tolerance of N: 130~450: j6
25
--- 57.5 57.5
256
Dimensions
B35
FRAME
BC BE C
SIZE
80M

H HA HE
18.5 35 50 80 10
115
10
293
LL O
UB
SHAFT EXTENSION
D
E EB EF EG F
BEARING
GA DB DRIVE END
109 40 M20x1.5 19 40 32
16 6 15.5 21.5 M6
OPPOSITE
DRIVE END
6204ZZC3
6204ZZC3
90S
36
35 56 90 10
125
10
344.5 109 40 M20x1.5 24 50 40
19 8
20
27
M8
90L
36
35 56 90 10
125
10
369.5 109 40 M20x1.5 24 50 40
19 8
20
27
M8
6205ZZC3
6205ZZC3
100L
21
40 63 100 12
146
12
125 50 M25x1.5 28 60 50
22 8
24
31
M10 6206ZZC3
6206ZZC3
112M
28
40 70 112 13 153.5 12
412.5 125 50 M25x1.5 28 60 50
22 8
24
31
M10 6306ZZC3
6306ZZC3
132S
40 89 132 16
171
12
466
125 50 M25x1.5 38 80 70
28 10
33
41
M12
132M
40 89 132 16
171
12
504
125 50 M25x1.5 38 80 70
28 10
33
41
M12
160M
38
60 108 160 18
198 14.5
608
158 60 M32x1.5 42 110 100 5
36 12
37
45
M16
160L
38
60 108 160 18
198 14.5
652
158 60 M32x1.5 42 110 100 5
36 12
37
45
M16
180M
39
60 121 180 20
224 14.5
672
158 70 M32x1.5 48 110 100 5
36 14 42.5 51.5 M16
180L
39
60 121 180 20
224 14.5
710
158 70 M32x1.5 48 110 100 5
36 14 42.5 51.5 M16
200L
60
106 133 200 24
262 18.5
770
231 80 M50x1.5 55 110 100 5
42 16
49
392
6308ZZC3
6306ZZC3
6309ZZC3
6307ZZC3
6311ZZC3
6310ZZC3
59
M20 6312ZZC3
6312ZZC3
225SC 37.5 106 149 225 28
288 18.5
816
231 90 M50x1.5 60 140 125 7.5 42 18
53
64
M20 6313ZZC3
6313ZZC3
225MA 37.5 106 149 225 28
288 18.5
811
231 90 M50x1.5 55 110 100 5
42 16
49
59
M20 6312ZZC3
6312ZZC3
225MC 37.5 106 149 225 28
288 18.5
841
231 90 M50x1.5 60 140 125 7.5 42 18
53
64
M20 6313ZZC3
6313ZZC3
Note:

3. Tolerance of shaft center high H : +0, -0.5
26
Dimensions
B35

Frame Size 250M to 355C
Output (kW)
4P
6P
FLANGE DIMENSION
FRAME FIG.
SIZE
NO
LA LE M N P
S
T
8P
55 ----- 55
75 ----- 75
90 ----- 90
110 ----- 110
--37
--45
--55
--75
--30
--37
--45
--55
132
(160)
---
2P
---
---
132
90
(160) (110)
250MA
AA AB AC AD AG AS
B' BA BA'
BB
22 140 500 450 550 18.5 5 406 85 480 499
400
255 122.5 349 --- 105 105
425
22 140 500 450 550 18.5 5 406 85 480 499
400
255 122.5 349 --- 105 105
425
280SA
22 140 500 450 550 18.5 5 457 110 560 550
433
255 122.5 368 --- 110
110
445
280SB
22 140 500 450 550 18.5 5 457 110 560 550
433
255 122.5 368 --- 110
110
445
280MA
22 140 500 450 550 18.5 5 457 110 560 550
433
255 122.5 419 --- 130 137
495
280MB
22 140 500 450 550 18.5 5 457 110 560 550
433
255 122.5 419 --- 130 137
495
315SA
25 140 600 550 660 24
6 508 115 615 660 527.5 336
163
406 --- 210 210
620
315SB
25 170 600 550 660 24
6 508 115 615 660 527.5 336
163
406 --- 210 210
620
---
315MA
25 140 600 550 660 24
6 508 115 615 660 527.5 336
163
457 --- 240 240
670
75
315MB
25 170 600 550 660 24
6 508 115 615 660 527.5 336
163
457 --- 240 240
670
250MC
160
200
---
---
---
315LA
25 140 600 550 660 24
6 508 130 630 660 527.5 336
163
508 --- 230 230
770
---
160
200
110
132
(160)
90
110
315LB
25 170 600 550 660 24
6 508 130 630 660 527.5 336
163
508 --- 230 230
770
(220)
(250)
---
---
---
315CA
30 140 600 550 660 24
6 508 150 650 682
590
412
189
710 --- 335 335
900
315CB
30 170 600 550 660 24
6 508 150 650 682
590
412
189
710 --- 335 335
900
315DA
30 140 600 550 660 24
6 508 150 650 682
590
412
189
900 --- 180 250 1060
315DB
30 170 600 550 660 24
6 508 150 650 682
590
412
189
900 --- 180 250 1060
--(315)
--220
250
(220) (200) (132)

(250) (220) (160)
---
---
---
(200)
(315) (250)
(220)
---
---
---
355MA
30 170 740 680 800 24
6 610 150 750 810
645
412
189
--- 560 330 330
910
---
220
250
160
200
220
132
160
355MB
30 210 740 680 800 24
6 610 150 750 810
645
412
189
--- 560 330 330
910
315
---
---
---
355LA
30 170 740 680 800 24
6 610 150 750 810
645
412
189
630 --- 330 330
910
200
220
355LB
30 210 740 680 800 24
6 610 150 750 810
645
412
189
630 --- 330 330
910
375 ------- 355CA

--- 375 315 250 355CB
30 170 740 680 800 24
6 610 150 750 810
645
412
189
710 --- 390 390 1100
30 210 740 680 800 24
6 610 150 750 810
645
412
189
710 --- 390 390 1100
---
Note:
315 250

2. Tolerance of N: 130~450: j6 , 550~680: js6
3. Open type ball bearing for frame size 250M to 355C
27
Dimensions
B35
FRAME
BC BE
SIZE

Frame Size 250M to 355C
H HA HE
LL O
UB
SHAFT EXTENSION
D
BEARING
E EB EF EG F
GA DB DRIVE END
OPPOSITE
DRIVE END
250MA 57.5 119 168 250 30
322
24
921
255 105 M63x1.5
60 140 125 7.5 42 18
53
64
M20
6313C3
6313C3
250MC 57.5 119 168 250 30
322
24
921
255 105 M63x1.5
65 140 125 7.5 42 18
58
69
M20
6315C3
6313C3
58
69
280SA
48
119 190 280 35 354.5 24 1037.5 255 140 M63X1.5 65 140 125 7.5 40 18
M20
6314C3
6314C3
280SB
48
119 190 280 35 354.5 24 1037.5 255 140 M63X1.5 75 140 125 7.5 40 20 67.5 79.5 M20
6318C3
6316C3
280MA
48
119 190 280 35 354.5 24 1087.5 255 140 M63X1.5 65 140 125 7.5 40 18
M20
6314C3
6314C3
280MB
48
119 190 280 35 354.5 24 1087.5 255 140 M63X1.5 75 140 125 7.5 40 20 67.5 79.5 M20
6318C3
6316C3
315SA
53
140 216 315 35
430
28
1216 322 180 M63X1.5 65 140 125 7.5 40 18
58
69
M20
6316C3
6314C3
315SB
53
140 216 315 35
430
28
1246 322 180 M63X1.5 80 170 160
40 22
71
85
M20
6320C3
6316C3
315MA
53
140 216 315 35
430
28
1266 322 180 M63X1.5 65 140 125 7.5 40 18
58
69
M20
6316C3
6314C3
315MB
53
140 216 315 35
430
28
1296 322 180 M63X1.5 80 170 160
40 22
71
85
M20
6320C3
6316C3
315LA
53
140 216 315 45
430
28
1366 322 180 M63X1.5 65 140 125 7.5 40 18
58
69
M20
6316C3
6314C3
315LB
53
140 216 315 45
430
28
1396 322 180 M63X1.5 80 170 160
71
85
M20
6320C3
6316C3
315CA
68
180 216 315 45
485
28
1484 372 200
M72X2
75 140 125 7.5 40 20 67.5 79.5 M20
6316C3
6316C3
315CB
68
180 216 315 45
485
28
1514 372 200
M72X2
95 170 160
100 M24
6322C3
6322C3
315DA
68
180 216 315 45
485
28
1674 372 200
M72X2
75 140 125 7.5 40 20 67.5 79.5 M20
6316C3
6316C3
315DB
68
180 216 315 45
485
28
1704 372 200
M72X2
95 170 160
48 25
86
100 M24
6322C3
6322C3
355MA
48
180 254 355 45
540
28
1605 372 230
M72X2
80 170 140
40 22
71
85
M20
6318C3
6318C3
355MB
48
180 254 355 45
540
28
1645 372 230
M72X2
100 210 180
48 28
90
106 M24
6322C3
6322C3
355LA
48
180 254 355 45
540
28
1605 372 230
M72X2
80 170 140
40 22
71
85
M20
6318C3
6318C3
355LB
48
180 254 355 45
540
28
1645 372 230
M72X2
100 210 180
48 28
90
106 M24
6322C3
6322C3
355CA
48
180 254 355 45
540
28
1795 372 230
M72X2
80 170 140
40 22
71
85
M20
6318C3
6318C3
355CB
48
180 254 355 45
540
28
1835 372 230
M72X2
100 210 180
48 28
90
106 M24
6322C3
6322C3
40 22
48 25
58
86
69
Note:

3. Tolerance of shaft center high H : 1) 80~250: +0, -0.5, 2) 280~355: +0, -1
28
General
ElectricalFormulas
Formulas
General Electrical
Name
Formula
Output
1HP=746W=0.746kW
Current
Input power
Output power
Efficiency
Power factor
Synchronous speed
Slip
Torque
Power
Starting time
Braking time
I=
Units
E
R
Pin = 3EICOS
Pout = EICOS
Pout = 3EICOS
Pout
P P
100% = in loss 100%
Pin
Pin
COS =
Pin
3EI
120 f
NS =
P
Pin in W
E: volt
R: Ohm
E: volt
I: ampere
Pout in W
: efficiency
cos : power factor
Ploss in W
100%
NS N
100%
NS
974kW
T=
N
S=
P = 1.027 NT
tS =
HP: horsepower
I in A
Pin = EICOS
GD 2 N
375(TM TL )
GD 2 N
tB =
375(TM + TL )
Reactive power absorbed Q = 3EISIN

by the motor
f: frequency of the
N s in min 1 power supply
P: poles
N: motor speed
T in kgf-m
1 kgf-m=9.8 N-m
P in W
GD 2 : inertia of
tS in sec
system
GD2 in kgm2 T : torque of motor
M
TL : torque of load
tB in sec
Q in VAR
Sound power level
P
Lw = 10 log( ) ( Po = 1012W )
Po
Sound pressure level
P
Lp = 20 log( ) ( Po = 2 10 5 Pa ) Lp in dB
Po
29
Definitions/ Notes
Lw in dB
Pa=1 N/m2
International Mounting Code (IM)

Foot-Mounted
IM B3
(IM 1001)
IM V5
(IM 1011)
Flange-Mounted
IM V6
(IM 1031)
IM B6
(IM 1051)
IM B5
(IM 3001)
IM V1
(IM 3011)
IM V3
(IM 3031)
IM B35
(IM 2001)
IM B7
( IM 1061)
Foot & Flange Mounted
IM B8
(IM 1071)
IM V15
(IM 2011)
IM V35
(IM 2031)
Enquiry Form
Customer Name
Contact Number
Company
Motor Specification Required

Efficiency Class (IE)
Output
kW / HP
Voltage
Volts
Poles
Location
Indoor
Outdoor
Mounting
Ingress Protection
IP55
Insulation Class
Class F (155 C)
Ambient Temperature
Temperature Rise
Class B (80 C)
Class F(105 C)
Starting Method
Direct-On-Line
Star-Delta
Inverter
IEC 60034-17
Torque :
Drive Method
Quantity
IE 1
IE 2
IE 3
Frequency
: ______
Hz
Others: ________
Application : _________
(eg. B3,V1,B35)
IP56
Others: __________
Class H (180 C)
_________ C
IEC 60034-25
Direct Coupling
Speed Range :
Belt drive
Inverter
Constant / Variable
From: _____To: ______ Hz
Others: ________
30
TECO Electric & Machinery Pte Ltd

18 Chin Bee Drive
Singapore 619865
Tel: +65 6265 4622 (General)
Tel: +65 6263 9269 (Local Sales)
Tel: +65 6263 9252 (Export Sales)
Fax: +65 6268 8651 (General)
Fax: +65 6265 7354 (Local Sales)
Fax: +65 6265 7354 (Export Sales)
Website: www.teco.com.sg
Email: ds@@teco.com.sg ( Local Sales)
Email: [email protected] (Export Sales)
TECO Electric & Machinery Sdn Bhd

PLO 52 (No.26), Jalan Firma 2/1
Kawasan Perindustrian Tebrau 1,
81100 Johor Bahru, Johor
Malaysia
Tel: +60 7-3548008
Fax: +60 7-3546107 / +60 7-3545017
Email: [email protected]
TECO Electric & Machinery (Thai) Co., Ltd

128/1 Soi Watsrivareenoi, Moo 7
Bangna Trad Road
Km.18, Banchalong, Bangplee
Samuthprakam 10540
Thailand
Tel: +662 3371311 ~ 20
Fax: +662 3371630 ~ 1
PT. Teco Multiguna Elektro

Jl Bandengan Utara No. 83/1-2-3
Jarkarta 14440
Indonesia
Tel: +62 21 6622201
Fax: +62 21 6697029
TECO(Vietnam) Electric & Machinery Co., Ltd

Long Thanh Industrial Zone
Long Thanh District, Dong Nai Province
Vietnam
Tel: +84 61 3514108
Fax: +84 61 3514110

AESV Catalogue Final

Uploaded by

Copyright:

Available Formats

AESV Catalogue Final

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

AESV Catalogue Final

Uploaded by

Copyright:

Available Formats

AESV / AESU / AESV-LA Series

Squirrel Cage Induction Motor

IE1 Performance Data

IE2 Performance Data

IE3 Performance Data

Dimension Drawing B35

TECO Singapore provides a total solution of motors and

Introduction to IEC 60034-30-1

What does this standard covers?

Rated Voltage up to 1000V;

CEMEP VS IEC 6003430-1

IEC 60034-2-1 Rotating electrical machines - Part 2-1:

All Motors have a maximum continuous duty rating of S1

IEC 60034-6 Rotating electrical machines - Part 6:

IEC 60034-7 Rotating electrical machines - Part 7:

Stock motors are designed for operation as below:

IEC 60034-8 Rotating electrical machines - Part 8:

Type: Squirrel Cage Induction Motor

IEC 60072-1 Dimensions and output series for rotating

Stock motors are design to meet Ingress Protection of

High Quality Deep Groove Ball SealedFor

supply Voltage (L1,L2,L3) to be connected to voltage

indicated in Delta conguraFon

Moisture Protection Accessories

FULL LOAD (A)

ROTOR PULL-UP DOWN

75.0 75.9 74.5 87.5 81.0 70.0 2.55

0.381 265 235 290 0.006 18.0

77.2 77.2 75.3 88.0 82.0 70.5 3.35

0.512 225 210 290 0.010 23.0

79.7 80.7 79.7 89.0 84.0 74.0 4.71

0.750 240 230 310 0.013 27.0

81.5 82.0 80.5 89.0 85.0 76.0 6.28

1.010 215 195 280 0.022 37.5

82.6 83.6 81.6 90.0 87.0 79.0 7.56

1.250 240 180 320 0.042 47.5

83.1 84.1 83.1 90.5 87.5 79.5 8.08

1.337 200 170 325 0.042 47.5

84.7 83.7 81.3 88.0 85.5 79.0 11.2

1.845 170 150 235 0.057 61.0

86.0 86.0 84.5 82.0 80.0 76.0 16.2

2.521 170 145 225 0.063 65.0

87.6 87.6 85.6 89.0 85.5 77.5 21.4

3.634 225 140 280 0.154 105

88.7 89.2 88.2 91.0 90.0 85.5 28.2

4.964 220 135 260 0.192 120

89.3 89.8 89.3 92.0 90.0 85.5 34.2

6.123 270 190 310 0.237 135

89.9 89.9 88.9 90.0 88.0 83.5 41.3

7.269 220 175 280 0.283 175

90.7 90.2 87.7 84.5 79.0 71.0 59.5

9.878 185 140 275 0.521 240

91.2 91.2 90.2 88.5 87.0 81.0 69.6

12.18 195 135 270 0.633 270

2955 225MA 91.7 91.2 89.7 91.5 90.0 86.0 81.5

14.82 150 130 260 1.074 315

2970 250MA 92.1 92.1 91.1 91.0 90.0 85.5 99.7

2970 280SA 92.7 92.7 91.4 87.0 85.0 80.0 141

24.57 130 120 260 1.759 515