Touch Screen Based Industrial Crane Controlling

International Journal of Scientific Research Engineering & Technology (IJSRET), ISSN 2278 0882
Volume 3 Issue 1, April 2014
TOUCH SCREEN BASED INDUSTRIAL CRANE CONTROLLING

1
Krunal patel, 2Bhavesh bhoya, 3Hiren chaudhari

Department of Instrumentation & control Engineering
1,2,3
Govt. Engineering college, Gandhinagar, Gujarat
1,2,3
ABSTRACT
2. TOUCH SCREEN BASED INDUSTRIAL

CRANE CONTROLLING
These paper present How to control the heavy load

crane by touch screen HMI. Here including PLC,
HMI, Drive, motor. In most of cement, paper and
metal industry the heavy load have to transport by
crane. The touch screen allows an operator move
freely around the work space and drive the crane with
simple graphical user interface. Here the direction of
crane should be vertical, horizontal sliding cage crane
shaft arrangement with interlink .The advantage of this
project to lift the heavy loads by industrial
applications. This project should be used terminal
method.
Keywords Touch screen, HMI, Industrial Crane,
Plc., AC MOTOR
1. INTRODUCTION
Controlling a crane is often very difficult for human
operators due to the slow response of the heavy
structures and the lightly-damped payload oscillation.
Manipulation tasks are made even harder when the
interface between the human and crane is unintuitive.
Although there have recently been significant
advancements in portable electronic devices, this
useful technology has not migrated into crane control
applications. Human manipulation of suspended
payloads using cranes can be difficult. Cable sway is
easily induced into the lightly damped system, which
inhibits efficient, safe, and accurate payload
manipulation. This problem is compounded when the
payload forms a double-pendulum configuration .To
aid operators, a touch screen controller was integrated
into the control system of industrial bridge crane. This
touch screen allows an operator to move freely around
the workspace and drive the crane with a simple
graphical user interface. The operational effect of the
touch screen was compared to that of a standard
pendent interface through a series of human operator
performance studies. The touch screen provides greater
operator mobility while producing comparable
manipulation performance. [1]
Fig 1: Block diagram

Controlling of the crane through automation contains
HMI
(Human
Machines
Interface),
PLC
(Programmable Logic Controller), drives and motor.
3. HMI (Human Machine Interface)

HMI is the acronym for Human Machine Interface,
and can be designed as just that; an interface between
the user and the machine. An HMI is considered an
interface; a very broad term that can include MP3
players, industrial computers, household appliances,
and office equipment. However, an HMI is much more
specific to manufacturing and process control systems.
An HMI provides a visual representation of a control
system and provides real time data acquisition. An
HMI can increase productivity by having a centralized
center that is extremely user-friendly.
www.ijsret.org
Fig 2: Block diagram of HMI
57
A Human Machine Interface (HMI) is exactly

what the name implies; a graphical interface that
allows humans and machines to interact. Human
machine interfaces vary widely, from control
panels for nuclear power plants. An HMI is the
centralized control unit for manufacturing lines,
equipped with Data Recipes, event logging, video
feed, and event triggering, so that one may access
the system at any moment for any purpose. For a
manufacturing line to be integrated with an HMI,
it must first be working with a Programmable
Logic Controller (PLC). It is the PLC that takes
the information from the sensors, and transforms it
to Boolean algebra, so the HMI can decipher and
make decisions.
4. PLC (Programmable Logic Controller)
interface. in order to program an HMI to operate a

PLC properly, all the registers of the PLC must be
known. A good way to learn how to program a PLC
via an HMI is to first start working with the PLC and
the software it came with. This helps build an
understanding of how to operate the PLC without the
HMI. That knowledge will easily transfer over when
the user is ready to connect the two units together.it
has great advantages such as HMI is the userfriendliness of the graphical interface, The graphical
interface contains colour coding that allows for easy
identification (for example: red for trouble),Pictures
and icons allow for fast recognition, easing the
problems of illiteracy, HMI can reduce the cost of
product manufacturing, and potentially increase profit
margins and lower production costs. HMI devices are
now extremely innovative and capable of higher
capacity and more interactive, elaborate functions than
ever before. Some technological advantages the HMI
offers are: converting hardware to software,
eliminating the need for mouse and keyboard, and
allowing kinaesthetic computer/human interaction.
5. IMPLEMENTATION
PLC is microprocessor based electronic device which

perform arithmetic and logical operation on any
process variable according to programme .Two types
of PLCs are available compact and modular .Main
Parts of the PLC are Input module ,Output Module,
Central Processing Unit, Power Supply, Rack and
chassis. For hardware implementation Schneider PLC
has been used and it has been interfaced with twido
suite software.
HMI/PLC Combination
Using just a PLC will not provide any real-time
feedback, cannot set off alarms nor modify the system
without reprogramming the PLC. The key advantage to
an HMI is it functionality; an HMI can be used for
simple tasks such as a coffee brewing controller, or a
Sophisticated control unit of a nuclear plant. With new
HMI designs emerging every day, we are now seeing
HMIs that offer remote access, allowing for access of
the terminal while away. Another advantage of an
HMI is that the user can personally design the user
Drives
An AC drive is a device that is used to control the
speed of an electrical motor, either an induction motor
or a synchronous motor. AC drives are also known by
various other names such as adjustable speed drives
(ASD) or adjustable frequency drives (AFD) or
variable frequency drives (VFD) or variable speed
drives (VSD) or frequency converters (FC). A fixed
speed is not suitable for all processes in all
circumstances; thus, the need for adjusting the speed
according to need. Industrial machinery is often driven
by electrical motors that have provisions for speed
adjustment. Such motors are simply larger, more
powerful versions of those driving familiar appliances
such as food blenders or electric drills. These motors
normally operate at a fixed speed. The speed is
controlled by changing the frequency of the electrical
supply to the motor. The 3-phase voltage in the
national electrical grid connected to a motor creates a
rotating magnetic field in it.
The rotor of the electrical motor will follow this
rotating magnetic field. An AC drive converts the
frequency of the network to anything between 0 to 300
Hz or even higher, and thus controls the speed of
motor proportionally to the frequency.
Rectifier unit
The AC drive is supplied by the electrical network via
a rectifier. The rectifier unit can be uni-or
bidirectional. When unidirectional, the AC drive can
accelerate and run the motor by taking energy from the
www.ijsret.org
58
network. If bidirectional, the AC drive can also take
the mechanical rotation energy from the motor and
process and feed it back to the electrical network.
DESIGNING OF HMI
DC circuit
The DC circuit will store the electrical energy from the
rectifier for the inverter to use. In most cases, the
energy is stored in high-power capacitors.
Inverter unit
The inverter unit takes the electrical energy from the
DC circuit and supplies it to the motor. The inverter
uses modulation techniques to create the needed 3phase AC voltage output for the motor. The frequency
can be adjusted to match the need of the process. The
higher the frequency of the output voltage is, the
higher the speed of the motor, and thus, the output of
the process.
6. AC MOTOR
The standard definition for an AC Motor is an electric
motor that is driven by alternating current. The AC
Motor is used in the conversion of electrical energy
into mechanical energy. This mechanical energy is
made from utilizing the force that is exerted by the
rotating magnetic fields produced by the alternating
current that flows through its coils. The AC Motor is
made up of two major components: the stationary
stator that is on the outside and has coils supplied with
AC current, and the inside rotor that is attached to the
output shaft.
The fundamental operation of an AC Motor relies on
the principles of magnetism. The simple AC Motor
contains a coil of wire and two fixed magnets
surrounding a shaft. When an electric (AC) charge is
applied to the coil of wire, it becomes an
electromagnet, generating a magnetic field. Simply
described, when the magnets interact, the shaft and the
coil of wires begin to rotate, operating the AC motor.
Fig.4 Designing of HMI
7. CONCLUSION
The purpose of this project to provide greater operator
mobility and touch screen allows an operator to move
freely around workspace and drive crane with simple
graphical user interface. In this project we use
connecting cabal to communicate HMI with plc an
additionally we can also use Bluetooth for connecting
HMI with plc also uses the switch or relay for
operating a motor when the HMI not work.
REFERENCES
[1] Kivila, A. Human operator studies of portable
touchscreen crane control interfaces, Industrial
Technology (ICIT), IEEE International Conference on
25-28 Feb. 2013, pp- 88 - 93
[2] G. Parker, B. Petterson, C. Dohrmann and R.
Robinett, "Command shaping for residual vibration
free crane maneuvers," in American Control
Conference, Seattle, WA, 1995, pp. 934-938.
[3] J. Vaughan, D. Kim, and W. Singhose, "Control of
tower cranes with double-pendulum payload
dynamics," Control Systems Technology, IEEE
Transactions on, vol. PP, no. 99, pp. 1 -13, 2010.
[4] Programmable logic controller principal and
application by John w. webb and Ronald a.rais
[5] www.schinderelectric.com
[6] www.anaheimautomation.com
[7] www.vacan.com
www.ijsret.org
59

Touch Screen Based Industrial Crane Controlling

Uploaded by

Touch Screen Based Industrial Crane Controlling

Uploaded by

International Journal of Scientific Research Engineering & Technology (IJSRET), ISSN 2278 0882

Volume 3 Issue 1, April 2014

TOUCH SCREEN BASED INDUSTRIAL CRANE CONTROLLING

Krunal patel, 2Bhavesh bhoya, 3Hiren chaudhari

2. TOUCH SCREEN BASED INDUSTRIAL

These paper present How to control the heavy load

Fig 1: Block diagram

3. HMI (Human Machine Interface)

Fig 2: Block diagram of HMI

A Human Machine Interface (HMI) is exactly

interface. in order to program an HMI to operate a

PLC is microprocessor based electronic device which

Fig.4 Designing of HMI

You might also like