Coreldraw Macro Programming Guide

Macro Programming Guide
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
About this resource . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
About additional resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Understanding automation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
What is automation? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Which automation environments are supported? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
What is VBA?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
What is VSTA? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
What are the main elements of automation? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
What is an object model? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

What is a class? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
What is a collection? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
What is a property?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
What is a method? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
What is an event? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
What is an enumeration? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
What is a constant?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
How is automation coding structured? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Declaring variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Using functions and subroutines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Ending lines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Including comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Allocating memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Defining scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Using Boolean comparison and assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Using logical and bitwise operators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Providing message boxes and input boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Referencing objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Referencing collections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Using object shortcuts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Providing event handlers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Getting started with macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Setting up the automation feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
To install the VBA and VSTA features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
To specify VBA options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Using the Macros toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Using the Macro Manager docker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Add-in Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Macro Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
26
27
28
28
Using the Project Explorer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Using the Code window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Using the Properties window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Using the Macro Editor toolbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Using the Object Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Using the VSTA Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Contents
Creating macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Creating macro projects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
To create a macro project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
To add a dialog box to a macro project. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
To add a code module to a macro project. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
To add a class module to a macro project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Writing macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
To add a macro to a macro project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

To edit a VBA macro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
To delete a VBA macro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Recording macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
To record and save a macro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

To record a temporary macro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Running macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
To run a saved macro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

To run a temporary macro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Debugging macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Making macros user-friendly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Providing toolbars for macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
To create a macro toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
To add buttons to a macro toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
To associate an image or icon with a macro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
To set a caption for a macro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
To set a tooltip for a macro. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Providing dialog boxes for macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Setting up dialog boxes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Coding dialog boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Providing user interaction for macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Capturing mouse clicks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Capturing mouse drags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Capturing coordinates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Providing documentation for macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Organizing and deploying macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Organizing macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Deploying macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
To export a GMS file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
To import a GMS file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
To export workspace features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
To import workspace features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Understanding the CorelDRAW object model . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Understanding the object-model hierarchy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Working with the Application object . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Working with documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Creating documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Opening documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Activating documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Setting document properties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Displaying documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Modifying documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Creating command groups for documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85

Contents
ii
Saving documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85

Exporting files from documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Publishing documents to PDF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
Printing documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
Closing documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91
Working with pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Creating pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93

Activating pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94
Reordering pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Sizing pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Modifying pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Deleting pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Working with layers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Creating layers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

Activating layers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
Locking and hiding layers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
Reordering layers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Renaming layers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Importing files into layers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Deleting layers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
Working with shapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Creating shapes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111

Determining shape type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121
Selecting shapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121
Duplicating shapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125
Transforming shapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125
Coloring shapes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130
Applying effects to shapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
Searching for shapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
Deleting shapes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
Working with import filters and export filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Working with import filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .139

Working with export filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141
Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149

Contents
iii
Introduction
Welcome to the Macro Programming Guide!
This resource can help you explore the macro-related features and functions of CorelDRAW and
Corel PHOTO-PAINT. An understanding of these features and functions can help you automate tasks or
develop commercial solutions that integrate with the software.
In this resource
This resource contains the following sections.

Section
Description
Understanding automation on page 4
Introduction to the concepts of automation and macros,

and to the macro-programming formats supported by the
software
Getting started with macros on page 25
Overview of the macro-related tools and features of the

software
Creating macros on page 42
How to write, record, run, and debug macros
Making macros user-friendly on page 54
How to enhance the usability of macros through dialog

boxes, toolbar buttons, user interaction, and
documentation
Organizing and deploying macros on page 68
How to organize and deploy the macros you create
Understanding the CorelDRAW object model on

page 71
Overview of the most important features and functions of

the CorelDRAW object model
Also included is a glossary (see page 144), which defines many of the key terms used in this documentation.
Most of the code examples provided in this documentation are written in VBA.
In this section
This section contains the following topics:

About this resource on page 1
About additional resources on page 2
About this resource

This resource assumes that the reader has experience with at least one procedural programming language, such
as BASIC, Microsoft Visual Basic (VB), C, C++, Java, Pascal, Cobol, or Fortran.

Introduction
This resource does not describe the basics of procedural programming (such as functions, conditional branching,
and looping). Therefore, before using this documentation, non-programmers are strongly advised to learn basic
programming in a language such as Microsoft Visual Basic for Applications (VBA).
For more detailed instruction on the VB programming environment and on VBA, see Microsoft Visual
Basic Help, which is available from the Help menu in the Macro Editor.
For a more basic introduction to macros, please see the topic Working with macros in the main Help
file for the application. You can access the main Help from within an application by clicking Help ` Help
topics.
Documentation conventions
The following table explains the documentation conventions used in this resource.
Wherever you see this
Youll find
A note describes required conditions for performing a procedure or
presents other essential information
A tip describes helpful information such as shortcuts, alternate
methods, or benefits that are related to a procedure
bold text
The name of a control or other element on the user interface
<text in italics and between angle brackets>
A placeholder for user-specified information, such as a path or filename
monospace text
A reference to coding
About additional resources

This topic describes how to get even more information about macros or the software.
For more information about macros
This software provides additional resources that contain helpful information about macros. These additional
resources, located in the Data folder for the installed software, are described in the following table.
Resource
Description and filename
Macro Help for CorelDRAW
Provides comprehensive information about the CorelDRAW

object model and the macro-related features and functions of
the application
draw_om.chm

Introduction
Resource
Description and filename
Macro Help for Corel PHOTO-PAINT
Provides comprehensive information about the Corel PHOTOPAINT object model and the macro-related features and
functions of the application
pp_om.chm
Object-model diagram for CorelDRAW
Provides a hierarchical representation of the CorelDRAW object

model
CorelDRAW Object Model Diagram.pdf
Object-model diagram for Corel PHOTO-PAINT
Provides a hierarchical representation of the Corel PHOTOPAINT object model

Corel PHOTO-PAINT Object Model Diagram.pdf
For a more basic introduction to macros, please see the topic Working with macros in the main Help
file for the application. You can access the main Help from within an application by clicking Help ` Help
topics.
For more information about the software
A variety of additional resources for the software are also available to you.
For comprehensive information about the features in the software, you can consult its installed documentation:
The program group for the software (on the Windows Start menu) includes a Documentation folder,
which provides easy access to various installed resources.
Each program offers in-product Help, displayed by clicking Help ` Help topics.
For even more information about the software, see the following Web-based resources.
Resource
Description and URL
CorelDRAW website
Provides the latest news, tips and tricks, and information about upgrades
www.corel.com/coreldraw
Corel Support Services website
Provides prompt and accurate information about product features,

specifications, pricing, availability, services, and technical support
www.corel.com/support
Corel Knowledge Base
Provides a repository of articles written by the Corel Technical Support

Services team in response to questions by users
www.corel.com/knowledgebase
CorelDRAW online community
Provides interaction with other users through sharing experiences, asking

questions, and receiving help and suggestions
www.coreldraw.com
You can submit any comments or suggestions about the software by using the contact information provided at
www.corel.com/contact.

Introduction
Understanding automation
Before you begin to work with macros, you need to understand the concept of automation. This section provides
basic information about automation and about the macro-programming formats that are supported by the
software.
In this section

What is automation? on page 4
Which automation environments are supported? on page 5
What are the main elements of automation? on page 10
How is automation coding structured? on page 13
What is automation?
Many actions that you perform in the software can be combined with other, related actions into a single
automated solution. Automating repetitive tasks saves time, reduces effort, and lets you perform operations that
are too complex to perform manually.
Automation can be used by programmers and nonprogrammers alike.
This documentation does not teach programming skills to nonprogrammers; rather, it helps experienced
programmers develop useful solutions within the software. If you are not a programmer, you may want
to refer to other programming-related resources before continuing to read this documentation.
What is a macro?
Most macros are created to automate a series of tasks within an application. The simplest meaning of the term
macro is the recording of a group of related actions that can be played back automatically, in sequence,
whenever you need to perform them. Macros consist of instructions that are written in a programming language,
and some programming languages provide access to additional, more advanced, actions that cannot be recorded.
For the purposes of this documentation, a macro refers to a coded solution that performs tasks in the
application by automating functions and subroutines (see Using functions and subroutines on page 15).
Although you can record a sequence of actions in the software, the real power of automation is that you can add
conditions and looping mechanisms to a recording. As an example, lets consider a simple macro that applies a
red fill and a 1-point outline to a selected shape. By adding a condition and a looping mechanism to the code,
you can produce a macro that seeks out each selected shape and applies only the fill to text shapes and only the
outline to all other shape types.
After you create a macro, you can ensure that it has the desired outcome by setpping through its code one line a
a time, or debugging it. When you are happy with the macro, you can keep it for future use and even share it
with others.

Which sample macros are available?
The software includes sample VBA macros, which supply additional functionality, demonstrate automation in
the suite, and provide sample code.
The following sample VBA macros are included for CorelDRAW:
File converter (FileConverter.gms) converts a vector or bitmap to a specified vector or bitmap format. You
can choose export parameters by using dialog boxes associated with particular filters. You can also save each
page as a separate file and set various page properties, such as size, orientation, and background color. The
following file formats are supported: AI, BMP, CDR, CGM, CMX, CPT, DSF, DXF, EPS, GIF, JPEG, PCT,
PNG, PPF, SVG, SWF, TIF, WMF, and WPG.
Calendar wizard (CalendarWizard.gms) generates customized calendars. You can choose the date range,
layout, font, color, language, and many other options. You can also add holidays and moon phases.
The following sample VBA macro is included for Corel PHOTO-PAINT:
HTML slide show creator (Slideshow.gms) generates an HTML slide show from the images you specify.
Open files can be added, ordered, and published as a series of HTML files, each of which displays one image
and provides navigation buttons. You can create a title, alternate text, and a name for each slide. You can also
choose a location and a name for the delineation folder; select the image folder; and specify notes, a caption, a
URL, and more.
Which automation environments are supported?

For CorelDRAW versions 6 through 9, the only method of automating tasks was using the Corel SCRIPT
language. Solution developers used Corel SCRIPT to create intelligent mini-applications for drawing shapes,
repositioning and resizing shapes, opening and closing documents, and setting styles within CorelDRAW.
Although the Corel SCRIPT language was useful for automating basic tasks, a more flexible and powerful
solution became necessary. For version 10, CorelDRAW was enhanced with support for the
Microsoft Visual Basic for Applications (VBA) engine, which handled behind-the-scenes automation. The
addition of VBA made CorelDRAW immediately accessible to millions of VBA and Microsoft Visual Basic (VB)
developers around the world. Since then, VBA has been supported by every version of the CorelDRAW software
suite.
More recently, the software suite added support for Microsoft Visual Studio Tools for Applications (VSTA),
the successor to VBA.
Although CorelDRAW no longer includes the Corel SCRIPT editor, it does include the Corel SCRIPT
run-time engine. Therefore, you can easily migrate scripts that were written for earlier versions of
CorelDRAW to later versions of the software. For information on using Corel SCRIPT with CorelDRAW,
see Working with scripts in the main Help file for CorelDRAW (draw.chm).
In Corel PHOTO-PAINT, you can automate tasks by using VBA or VSTA to create a macro, or by using
Corel SCRIPT to create a script. A macro is the better choice if you want to write the code that is required
to carry out the task (by using VBA or VSTA), while a script is the better choice if you want to record
the steps that are required to carry out the task (by using Corel SCRIPT). For information on using

Corel SCRIPT with Corel PHOTO-PAINT, see Working with scripts in the main Help file for
Corel PHOTO-PAINT (corelpp.chm).
By supporting VBA and VSTA, the software suite offers a platform for the following:
developing powerful corporate graphical solutions such as automated ticket generators, customized
calendars, and batch file-processors
streamlining workflows such as with on-the-fly page-layout mechanisms
customizing default software features such as the creation, alignment, or transformation of objects
...and much more!
VBA and VSTA each provide their own fully integrated development environment (IDE), with contextual popup lists, syntax highlighting, line-by-line debugging, and visual designer windows. These features are
particularly helpful to inexperienced developers.
For more information on VBA and VSTA, see the following topics:
What is VBA? on page 6
What is VSTA? on page 8
What is VBA?
Microsoft Visual Basic for Applications (VBA) is a built-in programming environment that can be used to
automate repetitive functions and create intelligent solutions in the software that supports it. VBA is a subset of
the Microsoft Visual Basic (VB) object-driven programming environment. Usually, VBA is integrated into
another application to customize functionality within that application.
VBA is both a language and an editor. The VBA language cannot be used without its editor, and the VBA editor
is the only utility in which VBA code can be edited or VBA programs can be run.
The VBA language is an event-driven programming language. In other words, it is used to write code that
produces a response to an action, such as clicking a button or choosing an option from a list box. When the
action occurs, the appropriate event is called, and the code for that event is executed. Events can be simple or
complex. For instance, you can code a single line that displays a message box or write an entire procedure that
interacts with a database.
With traditional procedural programming (or object-driven programming), the program starts at the
first line and executes one line at a time. VB provides an example of an object-driven programming
environment.
The VBA editor called the Macro Editor (formerly the Visual Basic Editor) in CorelDRAW and
Corel PHOTO-PAINT is an integrated development environment (IDE) that lets you manipulate the objects
that are exposed by the object model of the application. To help you code macros, the Macro Editor provides
context-sensitive Help for all the object-model elements that are available to you.
VBA is an in-process automation controller. In other words, VBA can be used to control software features that
can be automated, and VBA runs efficiently by bypassing the interprocess synchronization mechanisms.
However, the automation that the in-process VBA can access can also be accessed by the following:
external out-of-process automation controllers (OLE clients)
applications that are developed in programming languages (such as VB, Visual C++,
Windows Script Host, and C++) that can be used to develop OLE clients

the VBA engines of other applications

VBA provides a set of tools for customizing the graphical user interface of the software. These tools let you
process and present data efficiently and effectively. Advantages of using VBA include the following:
familiarity of the VB language
rapid application development (RAD) IDE
fast run-time performance of the resulting integrated solutions
extensible forms package that supports ActiveX controls for creating user interfaces
access to the full Windows application programming interface (API) and the underlying file system
connectivity to corporate data
integration with other software that is based on component object models (COMs)
VBA lets you customize an application to suit your needs, or even integrate it with another VBA-enabled
application by referencing the object-model components of the second application. Although VBA was
developed by Microsoft and is built into almost all its desktop applications (including Microsoft Office),
Microsoft licenses the technology to other companies (including Corel Corporation; Autodesk, Inc., in
AutoCAD; and IntelliCAD Technology Consortium, in IntelliCAD). Software products that support VBA
can typically be used to control each other, and they can even be used to control some software products that do
not support VBA. Consequently, you can use VBA to build solutions in CorelDRAW and Corel PHOTO-PAINT
that access a wide variety of other software products: databases, word processors, XML editors, and more.
For a complete list of applications that support VBA, see the Microsoft website.
How does VBA differ from VB and VBScript?
The VB programming system is an advanced set of programming tools that provides advanced functionality and
components for the Windows operating system and other Windows-based programs. For example, unlike VBA
or VBScript, VB lets you create application extensions (DLL files) and stand-alone executable programs (EXE
files). (The programs that you create with VBA must run inside the host application.)
VB is a visualversion of the BASIC programming language that is, it provides visual cues within the editor.
As a result, VB is an easy language to learn. In addition, Microsoft has greatly enhanced the original BASIC
language, so that VB is both powerful and fast (although not as powerful as Java or C++, nor as fast as C).
VBA is a subset of the VB programming language, and it uses the programming structure of VB to manipulate
the object-model elements that are exposed by an application. The manipulation of these objects results in small
packets of code procedures within the application. These code procedures and resulting projects are called addins.
VBScript (sometimes referred to as Microsoft Visual Basic, Scripting Edition) is also a subset of the VB
programming language. VBScript is a Web-based HTML document scripting language.
How does VBA differ from Java and JavaScript?
VBA is similar to Java and JavaScript in that it is a high-level, procedural programming language with full
garbage collection and very little memory-pointer support. (For more information, see Allocating memory on

page 16.) In addition, code that is developed in VBA, much like code developed in Java and JavaScript, supports
on-demand compilation and can be executed without being compiled.
VBA is also similar to JavaScript in that it cannot be executed as a stand-alone application. JavaScript is
embedded within Web pages as a mechanism for manipulating the document object model (DOM) of the Web
browser. Likewise, VBA programs are executed inside a host environment (such as CorelDRAW or
Corel PHOTO-PAINT) to manipulate the object model of the host.
Most VBA applications can be compiled to p-code to make them run more quickly, although the difference is
hardly noticeable because of the sophistication of todays computer hardware. Similar compilation is possible
with Java, but not with JavaScript.
Finally, whereas VBA uses a single equals sign ( = ) for both comparison and assignment, Java and JavaScript use
a single equals sign ( = ) for assignment and two equals signs ( == ) for Boolean comparison. (For more
information, see Using Boolean comparison and assignment on page 17.)
How does VBA differ from C and C++?
Like C and C++, VB uses functions. In VB, functions can be used to return a value, but subroutines cannot be
used in that way. However, functions are used in C and C++, regardless of whether you want to return a value.
(For more information, see Using functions and subroutines on page 15.)
VBA allocates and frees memory transparently. In C and C++, however, the developer is responsible for most
memory management. As a result, using strings in VBA is even simpler than using the CString class in C++.
Finally, whereas VBA uses a single equals sign ( = ) for both comparison and assignment, C and C++ use a
single equals sign ( = ) for assignment and two equals signs ( == ) for Boolean comparison. (For more
information,see Using Boolean comparison and assignment on page 17.)
How does VBA differ from WSH?
Windows Script Host (WSH) is an out-of-process automation controller that lets you do occasional scripting and
automation of Windows tasks and can be used to control software. Although WSH is a useful addition to the
Windows operating system, WSH scripts tend to be slow because they must run out of process, and they cannot
be compiled (and must be interpreted as they are executed).
WSH is a host for a number of scripting languages, each of which has its own syntax. However, the standard
language that WSH uses is a macro language that resembles VB, so for standard scripts, the syntax is the same
as in VBA.
What is VSTA?
The successor to VBA, Microsoft Visual Studio Tools for Applications (VSTA) is based on
Microsoft Visual Studio 2008. In CorelDRAW and Corel PHOTO-PAINT, the VSTA feature supports the .NET
framework and enables development in two programming languages: Visual Basic .NET and Visual C#.
The VSTA Editor in CorelDRAW and Corel PHOTO-PAINT is an integrated development environment (IDE)
that lets you create VSTA solutions for the software.

How does VSTA compare with VBA?
Both VSTA and VBA allow you to create powerful macro solutions. With VSTA, you use the VSTA Editor as an
IDE, and you use Visual Basic .NET or Visual C# as a programming language. With VBA, you use the
Macro Editor as an IDE, and you use VBA as a programming language.
If you want to perform any of the following tasks, you can use either VSTA or VBA:
customize or extend the features of the software
interact with other applications that use Visual Basic 6 or with other compatible components that are
external to the software
interact with Web-based services
customize the IDE with add-ins
create macro projects with multi-threading support, if desired
access macro projects programmatically
generate macro code dynamically
store macro code in a pre-compiled format
hide macro code from other macro authors
debug macro projects
create customized user interfaces for macro projects
However, if you want to perform any of the following tasks, you must use VSTA:
access the .NET framework natively to support using Managed Add-in Framework (MAF), referencing
.NET assemblies directly, running customized code on the Common Language Runtime (CLR), enforcing
.NET security policies, or creating user interfaces by using .NET WinForms
fully customize the IDE
create macro projects that are certified to run on Windows Vista
create macro projects that support 64-bit processors
create macro projects that support server-side customizations
create macro projects that support all data types, including BigDecimal and Int64
create macro projects and macro assemblies that persist without the use of structured storage
open and modify macro projects in Visual Studio
compile macro projects to DLL assemblies
run macro projects out of process
run macro projects without causing the host application to stop execution at errors or breakpoints
isolate macro projects from one another; run macro projects independently, and stop them during runtime
without affecting other running projects
author macros within managed code
prevent servers from running customized user interfaces for macro projects

What are the main elements of automation?

If youve ever developed object-oriented code in C++, Borland Delphi, or Java, youre already familiar with
programming-related concepts such as objects, classes, properties, and methods. However, lets
reexamine these terms as they apply to automating CorelDRAW and Corel PHOTO-PAINT.
In this topic
This topic contains the following subtopics:

What is an object model? on page 10
What is a class? on page 11
What is a collection? on page 11
What is a property? on page 11
What is a method? on page 12
What is an event? on page 12
What is an enumeration? on page 12
What is a constant? on page 12
What is an object model?

An object model represents the hierarchy of items (or objects) that make up an application and defines the
interrelationships of the objects within that hierarchy. In an object model, each object is a child of another object,
which is a child of yet another object, and so on. Furthermore, each object in an object model is defined by a
property, a method, or an event, or a combination of these items.
Besides providing a high level of structure, an object model also lets you use object types (or classes) in various
ways. For example, a Shape object of type group is used to contain other Shape objects, each of which is from
type group or some other type, such as rectangle, curve, or text.
This high level of organization makes the object model easy to use, yet powerful.
How is an object model used in automation?
Automating CorelDRAW or Corel PHOTO-PAINT is accomplished by using the object model of the
application to access the various objects in a document and make changes to those objects.
In CorelDRAW and Corel PHOTO-PAINT, the Application object represents the top of the object hierarchy:
the program itself. All objects are children or grandchildren (or great-grandchildren, and so on) of the
application.
Starting with the Application object, you can drill down through the layers of hierarchy in the object model
until you find the desired, and usually the more specific, object. To reference the desired object, you must use a
standard notation to separate each level of the object hierarchy. As in many object-oriented languages, the
automation environment requires the use of a period or dot operator ( . ) to indicate that the object on the
right is a member (or child) of the object on the left.
Application.Documents(1).Pages(1).Layers(1).Shapes(1).Name = "ABC"

10
An object requires its full hierarchical (or fully qualified) reference unless a shortcut is available to it (or unless
it has an implicit or implied meaning). An object shortcut is merely a syntactic replacement for the long-hand
version of an object. For example, the shortcut object ActiveLayer replaces the long-hand version
Application.ActiveDocument.ActivePage.ActiveLayer, while the object shortcut ActiveSelection
replaces the long-hand version Application.ActiveDocument.Selection.
For more information on object shortcuts, see Using object shortcuts on page 22.
What is a class?
A class is the definition or description of an object. A class outlines the properties, methods, and events that
apply to a type of object in an application; it acts as a template for all objects of that type class. To use a
metaphor, the class car is a small vehicle with an engine and four wheels.
An object is an instance of a class. To extend the car metaphor, the actual, physical car purchased for the purposes
of driving is an object (that is, an instance of the class car).
In the context of CorelDRAW and Corel PHOTO-PAINT, each open document is an instance of the Document
class, each page in the document is an instance of the Page class, and each layer (and each shape on each layer)
are more instances of more classes. For example, Document represents the Document class in the software
program. However, ActiveDocument represents an object within that class because it makes specific reference
to one object.
As previously discussed, objects are often made up of other smaller objects. For example, a car contains four
objects of the class wheel, two objects of the class headlight, and so on. Each of these child objects has the
same properties and methods of its class-type. This parent/child relationship of objects is an important one to
recognize, particularly when referencing an individual object.
Some classes inherit features from their parents. For example, in the context of CorelDRAW and
Corel PHOTO-PAINT, the Shape type has many subtypes (or inherited types), including Rectangle, Ellipse,
Curve, and Text. All these subtypes can make use of the basic members of the Shape type, including methods
for moving and transforming the shape and for setting its color. However, the subtypes also have their own
specialist members; for example, a Rectangle can have corner radii, whereas Text has an associated Font
property.
What is a collection?
A collection is similar to an array of objects; it is an object that contains a group of objects that are similar in
type. These objects share the same properties, methods, and events, and they are uniquely identified within the
collection by their index number or their name. Collection objects act in the same manner and are always plural.
For example, Documents represent the Documents collection class in the software program. However,
Documents.Item (1) references the first Document object in that collection.
What is a property?
A property is like an adjective in that it represents an attribute or characteristic quality of an object. Properties
can be returned or set, or they can be read-only.
Most classes have properties. As an illustration, the properties of the class car are that it is small, it has an
engine, and it has four wheels. Every instance of the class car (that is, every object in that class) also has
properties such as color, speed, and number of seats. Read-only properties are fixed by the design of the class; for

11
example, the number of wheels or seats does not (usually) vary from car to car. However, other properties can be
changed after the object has been created; for example, the speed of the car can go up and down, and, with a bit
of help, its color can be changed.
In the context of CorelDRAW and Corel PHOTO-PAINT, Document objects have a name, a resolution, and
horizontal and vertical ruler units; individual shapes have outline properties and fill properties, as well as a
position and a rotation factor; and text objects have text properties, which may include the text itself. For
example, ActiveDocument.Name represents the Name property of a Document object; it specifies the name of
the active document.
What is a method?
A method is like a verb in that it represents an action that can be performed by or on an object. In the example
of a class car, the car can be made to go faster and slower, so two methods for the class are accelerate and
decelerate.
In the context of CorelDRAW and Corel PHOTO-PAINT, documents have methods for creating new pages,
layers have methods for creating new shapes, and shapes have methods for applying transformations and effects.
For example, ActiveDocument.Close represents the Close method of a Document object; it closes the active
document.
What is an event?
An event is like a noun in that it represents an action that takes place within an object. An event is triggered by
an action, such as a mouse click, a key press, or a system timer. An event can be coded to trigger appropriate
response in its object.
For example, the ActiveDocument.AfterSave event triggers an action in the Document object after it has
been saved.
What is an enumeration?
An enumeration (also called an enumerated type) represents a fixed value in the procedures and functions of
the coding for a macro. Whereas a variable temporarily stores a changing data value, the value of an
enumeration does not change.
What is a constant?
A constant is an instance of an enumeration, and an enumeration groups similar constants together.
For example, AddinFilter is an enumeration, yet it contains several constants, including AddinFilterNone
and AddinFilterNew.

12
How is automation coding structured?

Your programming knowledge should help you learn to automate the software, regardless of your level of
experience with Microsoft Visual Basic for Applications (VBA) or Microsoft Visual Studio Tools for Applications
(VSTA).
In this topic
This topic contains the following subtopics:

Declaring variables on page 13
Using functions and subroutines on page 15
Ending lines on page 16
Including comments on page 16
Allocating memory on page 16
Defining scope on page 17
Using Boolean comparison and assignment on page 17
Using logical and bitwise operators on page 18
Providing message boxes and input boxes on page 19
Referencing objects on page 19
Referencing collections on page 20
Using object shortcuts on page 22
Providing event handlers on page 23
The Macro Editor formats all VBA coding for you (see Formatting code automatically on page 31). The
only way to customize the formatting is to change the size of the indentations.
VBA can be used to create object-oriented classes. However, this function is a feature of the programming
language and is therefore not discussed in detail in this documentation.
Declaring variables
In VBA, the construction for declaring variables is as follows:
Dim foobar As Integer
The built-in data types are Byte, Boolean, Integer, Long, Single, Double, String, Variant, and several
other less-used types including Date, Decimal, and Object.
Variables can be declared anywhere within the body of a function, or at the top of the current module. However,
it is generally a good idea to declare a variable before it is used; otherwise, the compiler interprets it as a
Variant, and inefficiencies can be incurred at run time.
Booleans take False to be 0 and True to be any other value, although converting from a Boolean to a
Long results in True being converted to a value of 1.
To get more information about one of the built-in data types, type it in the Code window of the
Macro Editor, select it, and then press F1.

13
Data structures can be built by using the following VBA syntax:

Public Type fooType
item1 As Integer
item2 As String
End Type
Dim myTypedItem As fooType
The items within a variable declared as type fooType are accessed by using dot notation:
myTypedItem.item1 = 5
Declaring strings
Using strings is much simpler in VBA than in C. In VBA, strings can be added together, truncated, searched
forwards and backwards, and passed as simple arguments to functions.
To add two strings together in VBA, simply use the concatenation operator ( & ) or the addition operator ( + ):
Dim string1 As String, string2 As String
string2 = string1 & " more text" + " even more text"
In VBA, there are many functions for manipulating strings, including InStr(), Left(), Mid(), Right(),
Len(), and Trim().
Declaring enumerations
To declare an enumeration in VBA, use the following construction:

Public Enum fooEnum
ItemOne
ItemTwo
ItemThree
End Enum
By default, the first item in an enumerated type is assigned a value of 0.
Declaring arrays
To declare an array in VBA, use parentheses that is, the ( and ) symbols:
Dim barArray (4) As Integer

14
The value defines the index of the last item in the array. Because array indexes are zero-based by default, there
are five elements in the preceding sample array (that is, elements 0 thru 4, inclusive).
Arrays can be resized by using ReDim. For example, the following VBA code adds an extra element to barArray
but preserves the existing contents of the original five elements:
ReDim Preserve barArray (6)
Upper and lower bounds for an array can be determined at run time by using the functions UBound() and
LBound().
Multidimensional arrays can be declared by separating the dimension indexes with commas, as in the following
VBA example:
Dim barArray (4, 3)
Using functions and subroutines

VBA uses both functions and subroutines (or subs). Functions can be used to return a value, but subs cannot.
In VBA, functions and subs do not need to be declared before they are used, nor before they are defined. In fact,
functions and subs need to be declared only if they actually exist in external system DLLs.
Typical functions in a language such as Java or C++ can be structured as follows:
void foo( string stringItem ) {
// The body of the function goes here
}
double bar( int numItem ) { return 23.2; }
In VBA, however, functions are structured as in the following example:

Public Sub foo (stringItem As String)
' The body of the subroutine goes here
End Sub
Public Function bar (numItem As Integer) As Double bar = 23.2
End Function
To force a function or sub to exit immediately, you can use Exit Function or Exit Sub (respectively).

15
Ending lines
In VBA, each statement must exist on its own line, but no special character is required to denote the end of each
line. (In contrast, many other programming languages use a semicolon to separate individual statements.)
To break a long VBA statement over two or more lines, each of the lines (other than the last line) must end with
an underscore ( _ ) preceded by at least one space:
newString = fooFunction ("This is a string", _
5, 10, 2)
You can combine several statements in a single VBA line by separating them with colons:
a = 1 : b = 2 : c = a + b
A VBA line cannot end with a colon. VBA lines that end with a colon are labels that are used by the Goto
statement.
Including comments
Comments in VBA similarly to in ANSI, C++, and Java can be created only at the end of a line.
Comments begin with an apostrophe ( ' ) and terminate at the end of the line.
Each line of a multi-line comment must begin with its own apostrophe in VBA:
a = b ' This is a really interesting piece of code that
' requires so much explanation that I needed to break
' the comment over multiple lines.
To comment out large sections of VBA code, use the following syntax (similarly to in C or C++):
#If 0 Then ' That's a zero, not the letter 'oh'.
' All this code will be ignored by
' the compiler at run time!
#End If
Allocating memory
VBA does not support C-style memory pointers. Memory allocation and garbage collection are automatic and
transparent, just as in Java and JavaScript (and some C++ code).
Passing arguments
Most languages, including C++ and Java, pass an argument to a procedure as a copy of the original. If the
original must be passed, then one of two things can happen:
a memory pointer is passed that directs the procedure to the original argument in memory
a reference to the original argument is passed

16
Microsoft Visual Basic (VB) has the same requirements for passing arguments. In VB, passing a copy of the
original argument is called passing by value and passing a reference to the original is called passing by
reference.
By default, function and subroutine parameters are passed by reference. A reference to the original variable is
passed in the argument of the procedure; changing the value of that argument, in effect, changes the value of the
original variable value as well. In this way, more than one value can be returned from a function or subroutine. To
explicitly annotate the code to indicate that an argument is being passed by reference, you can prefix the
argument with ByRef.
If you want to prevent a procedure from changing the value of the original variable, you can force the copying of
an argument. To do this in VBA, prefix the argument with ByVal, as shown in the example that follows. The
functionality of ByRef and ByVal is similar to the ability of C and C++ to pass a copy of a variable, or to pass a
pointer to the original variable.
Private Sub fooFunc (ByVal int1 As Integer, _
ByRef long1 As Long, _
long2 As Long) ' Passed ByRef by default
In the preceding VBA example, arguments long1 and long2 are both, by default, passed by reference.
Modifying either argument within the body of the function modifies the original variable; however, modifying
int1 does not modify the original because it is a copy of the original.
Defining scope
You can define the scope of a data type or procedure (or even an object). Data types, functions, and subroutines
(and members of classes) that are declared as private are visible only within that module (or file). By contrast,
functions that are declared as public are visible throughout all the modules; however, you may need to use fully
qualified referencing if the modules are almost out of scope for example, if you are referencing a function in a
different project.
Unlike C, VBA does not use braces that is, the { and } symbols to define local scope. Local scope in VBA
is defined by an opening function or subroutine definition statement (that is, Function or Sub) and a matching
End statement (that is, End Function or End Sub). Any variables declared within the function are available
only within the scope of the function itself.
Using Boolean comparison and assignment

In Microsoft Visual Basic (VB), Boolean comparison and Boolean assignment are both performed by using a
single equals sign ( = ):
If a = b Then c = d
By contrast, many other languages use a double equals sign for Boolean comparison and a single equals sign for
Boolean assignment:
if( a == b ) c = d;

17
The following code, which is valid in C, C++, Java, and JavaScript, is invalid in VBA:
if( ( result = fooBar( ) ) == true )
The preceding example would be written in VBA as the following:

result = fooBar( )
If result = True Then
For other Boolean comparisons, VBA uses the same operators as other languages (except for the operators for is
equal to and is not equal to). All the Boolean-comparison operators are provided in the following table.
Comparison
VBA operator
C-style operator
Is equal to
==
Is not equal to
<>
!=
Is greater than
>
>
Is less than
<
<
Is greater than or equal to
>=
>=
Is less than or equal to
<=
<=
The result of using a Boolean operator is always either True or False.
Using logical and bitwise operators

In VBA, logical operations are performed by using the keywords And, Not, Or, Xor, Imp, and Eqv, which perform
the logical operations AND, NOT, OR, Exclusive-OR, logical implication, and logical equivalence (respectively).
These operators also perform Boolean comparisons.
The following code shows a comparison written in C or a similar language:
if( ( a && b ) || ( c && d ) )
This example would be written as follows in VBA:

If ( a And b ) Or ( c And d ) Then
Alternatively, the preceding VBA code could be written in the following full long-hand form:
If ( a And b = True ) Or ( c And d = True ) = True Then
The following table provides a comparison of the four common VBA logical and bitwise operators, and the Cstyle logical and bitwise operators that are used by C, C++, Java, and JavaScript.
VBA operator
C-style bitwise operator
C-style Boolean operator
And
&
&&

18
VBA operator
C-style bitwise operator
C-style Boolean operator
Not
Or
||
Xor
Providing message boxes and input boxes

In VBA, you can present simple messages to the user by using the MsgBox function:
Dim retval As Long
retval = MsgBox("Click OK if you agree.", _
vbOKCancel, "Easy Message")
If retval = vbOK Then
MsgBox "You clicked OK.", vbOK, "Affirmative"
End If
You can also get strings from the user by using InputBox function:
Dim inText As String
inText = InputBox("Input some text:", "type here")
If Len(inText) > 0 Then
MsgBox "You typed the following: " & inText & "."
End If
If the user clicks Cancel, the length of the string returned in inText is zero.
For information on creating more complex user interfaces, see Making macros user-friendly on page 54.
Referencing objects
If you want to create a reference to an object so that you can treat that reference like a variable (sh, in the
following VBA example for CorelDRAW), you can use the Set keyword.
Dim sh As Shape
Set sh = ActiveSelection.Shapes.Item(1)
After you create this reference, you can treat it as though it were the object itself.
sh.Outline.Color.GrayAssign 35
If the selection is changed while sh is still in scope, sh references the original shape from the old selection and is

19
unaffected by the new selection. You cannot simply assign the object to the variable as in the following example:
Dim sh As Shape
sh = ActiveSelection.Shapes.Item(1)
To release an object, you must set its reference value to Nothing.

Set sh = Nothing
You can also test whether a variable references a valid object by using the Nothing keyword.
If sh Is Nothing Then MsgBox "sh is de-referenced."
Objects do not need to be explicitly released. In most cases, VB releases the object upon disposal of the variable
when you exit the function or subroutine.
Referencing collections
Many objects are members of collections. A collection is similar to an array, except that it contains objects rather
than values. However, members of collections can be accessed in the same way as arrays. For example, a
collection that is used frequently in CorelDRAW is the collection of shapes on a layer: The object ActiveLayer
references either the current layer or the layer that is selected in the Object Manager docker.
CorelDRAW contains many collections: A document contains pages, a page contains layers, a layer contains
shapes, a curve contains subpaths, a subpath contains segments and nodes, a text range contains lines and words,
a group contains shapes, and the application contains windows. All these collections are handled by VBA in the
same way.
Referencing collection items
To reference the shapes on a layer, the collection of shapes for that layer is used: ActiveLayer.Shapes. To
reference the individual shapes in the collection, the Item() property is used. Here is a VBA example for
CorelDRAW:
Dim sh As Shape
Set sh = ActiveLayer.Shapes.Item(1)
Most elements of a collection start at 1 and increase. For the collection ActiveLayer.Shapes, Item(1) is the
item at the top or front of the layer in other words, it is the item that is in front of all other shapes.
Furthermore, because each item in the ActiveLayer collection is an object of type Shape, you can reference any
item in VBA merely by appending the appropriate dot-notated member:
ActiveLayer.Shapes.Item(1).Outline.ConvertToObject
Sometimes, individual items have names. If the item you are looking for has an associated name (and you know
what the name is and which collection the item is in), you can use that name to reference the item directly, as in
the following VBA example for CorelDRAW:
Dim sh1 As Shape, sh2 As Shape

20
Set sh1 = ActiveLayer.CreateRectangle(0, 5, 7, 0)

sh1.Name = "myShape"
Set sh2 = ActiveLayer.Shapes.Item("myShape")
Also, because an item is usually the implied or default member of a collection, it is not strictly required. For this
reason, the last line of the preceding VBA code can be rewritten as follows:
Set sh2 = ActiveLayer.Shapes("myShape")
Counting collection items
All collections have a property called Count. This read-only property gives the number of members in the
collection, as in the following VBA example for CorelDRAW:
Dim count As Long
count = ActiveLayer.Shapes.Count
The returned value is not only the number of items in the collection: Because the collection starts from 1, it is
also the index of the last item.
Parsing collection items
It is often necessary to parse through the members of a collection to check or change the properties of each item.
By using the Item() and Count members, it is straightforward to step through a collection of items. With each
iteration, it is possible to test the properties of the current item, or to call its methods. The following VBA code
for CorelDRAW restricts all shapes on the layer to no wider than ten units:
Dim I As Long, count As Long
count = ActiveLayer.Shapes.Count
For I = 1 to count
If ActiveLayer.Shapes.Item(i).SizeWidth > 10 Then
ActiveLayer.Shapes.Item(i).SizeWidth = 10
End If
Next I
There is, however, a more convenient way of parsing a collection in VBA. Instead of using the Count property
and a For-Next loop, this technique uses a For-Each-In loop:
Dim sh As Shape
For Each sh In ActiveLayer.Shapes
If sh.SizeWidth > 10 Then

21
sh.SizeWidth = 10
End If
Next sh
If you want to copy the selection and then parse it later when it is no longer selected, copy the selection into a
ShapeRange object:
Dim sr As ShapeRange
Dim sh As Shape
Set sr = ActiveSelectionRange
For Each sh In sr
' Do something with each shape
Next sh
Using object shortcuts

Shortcuts are provided for some frequently accessed objects. Using shortcuts requires less typing, so shortcuts are
easier to use than their longhand versions. (Also, using shortcuts can improve run-time performance because the
compiler does not need to determine every object in a long dot-separated reference.)
For CorelDRAW, a shortcut can be used on its own as a property of the Application object. The following
table provides these shortcuts and their long forms. (For a description of any item, see the Object Model
Reference section of the Macros Help file for CorelDRAW [draw_om.chm].)
Shortcut
Long form
ActiveLayer
ActivePage.ActiveLayer
ActivePage
ActiveDocument.ActivePage
ActiveSelection
ActiveDocument.Selection
ActiveSelectionRange
ActiveDocument.SelectionRange
ActiveShape
ActiveDocument.Selection.Shapes(1)
ActiveView
ActiveWindow.ActiveView
ActiveWindow
ActiveDocument.ActiveWindow
For Corel PHOTO-PAINT, a shortcut can be used on its own as a property of the Corel PHOTO-PAINT
Application object. The following table provides these shortcuts and their long forms. (For a description of any
item, see the Object Model Reference section of the Corel PHOTO-PAINT Macros Help file [pp_om.chm].)
Shortcut
Long form
ActiveLayer
ActivePage.ActiveLayer

22
Shortcut
Long form
ActiveWindow
ActiveDocument.ActiveWindow
For CorelDRAW, the following shortcuts can also be used as members of a given Document object:
ActiveLayer
ActivePage
ActiveShape
ActiveWindow
For Corel PHOTO-PAINT, the following shortcuts can also be used as members of a given Document object:
ActiveLayer
ActiveWindow
For CorelDRAW, the Document object also has the properties Selection and SelectionRange, which let you
get the selection or selection range (respectively) from a specified document regardless of whether that document
is active.
Providing event handlers

While running, CorelDRAW and Corel PHOTO-PAINT raise various events to which macros can respond
through the use of event handlers subroutines with specific, defined names. Each macro project defines its
event handlers in one of the following code modules:
ThisMacroStorage for macro projects that are stored in Global Macro Storage (GMS) files
ThisDocument for macro projects that are stored in documents
The GlobalMacroStorage object is a virtual object that represents each and all open documents. The
GlobalMacroStorage object has several events that are raised at the time of any event, such as opening,
printing, saving, or closing a document (although the range of events is actually greater than this because each
one has a before and after event).
To respond to an event, you must provide an event handler a subroutine in any ThisMacroStorage module
with a specific name for which the application is pre-programmed to search. However, the application does check
all ThisMacroStorage modules in all installed projects; for this reason, you can create an event-driven solution
and distribute it as a single project file just as you would provide any other solution. Each project can have only
one ThisMacroStorage module, and it is automatically created when the project is first created.
In VBA, you can add event handlers to a ThisMacroStorage module by using the Macro Editor. For example, a
CorelDRAW macro solution may need to respond to the closing of a document by logging the closure in a file as
part of a workflow-management system. To respond to the opening of a document, the solution must respond to
the OpenDocument event for the GlobalMacroStorage class. To create this event handler in VBA, do the
following:
Open a ThisMacroStorage module for editing in the Macro Editor.
Next, choose GlobalMacroStorage from the Object list box at the top of the Code window, and then choose
DocumentOpen from the Procedure list box.
The Macro Editor creates a new, empty subroutine called GlobalMacroStorage_DocumentOpen() or, if that
subroutine already exists, the Macro Editor places the cursor into it. To then add the name of the opened file to
the log, you need only write some code. To reduce the size of the ThisMacroStorage module, you can assign this

23
event-logging task to a public subroutine in another module. This technique lets the run-time interpreter more
easily parse all the ThisMacroStorage modules each time an event is raised. The following VBA code illustrates
this example for CorelDRAW:
Private Sub GlobalMacroStorage_OpenDocument(ByVal Doc As Document, _
ByVal FileName As String)
Call LogFileOpen(FileName)
End Sub
Here is a small sample of the events available in CorelDRAW:

Event
Description
Start
Raised when the user starts the application
DocumentNew
Raised when a document is created; passes a reference to

the document
DocumentOpen
Raised when a document is opened; passes a reference to

the document
DocumentBeforeSave
Raised before a document is saved; passes the file name of

the document as a parameter
DocumentAfterSave
Raised after a document is saved; passes the file name of the

document as a parameter
DocumentBeforePrint
Raised before the Print dialog box is displayed
DocumentAfterPrint
Raised after a document is printed
SelectionChange
Raised when a selection changes
DocumentClose
Raised before a document is closed
Quit
Raised when the user quits the application
Event handlers for frequent events such as events related to the Shape class should be as efficient
as possible, to keep the application running as quickly as possible.

24
Getting started with macros

Now that you understand a bit about automation, youre ready to get started with macros. This section provides
an overview of the macro-related tools and features of CorelDRAW and Corel PHOTO-PAINT.
In this section

Setting up the automation feature on page 25
Using the Macros toolbar on page 26
Using the Macro Manager docker on page 27
Using the Add-in Manager on page 28
Using the Macro Editor on page 28
Using the VSTA Editor on page 40
Setting up the automation feature

Before you can develop and run macros in the software, you may need to set up the automation features for VBA
and VSTA.
When you perform a typical installation of the software, the VBA and VSTA features are installed by default.
However, you can manually install them if necessary. You can also specify various options for VBA.
For details on setting up the automation feature, see the following procedures:
To install the VBA and VSTA features on page 25
To specify VBA options on page 25
To install the VBA and VSTA features

1 Access the setup, and follow the on-screen instructions for modifying the software.
2 On the Features page of the setup, enable the following check boxes in the Utilities list box:
Visual Basic for Applications

Visual Studio Tools for Applications
To specify VBA options

1 Click Tools ` Options.
2 In the Workspace list of categories, click VBA.
3 In the Security area, specify how to control the risk of running malicious macros by clicking Security
options.
If you want to bypass this security feature, enable the Trust all installed GMS modules check box, and then
proceed to step 6.
4 On the Security level page of the Security dialog box, enable one of the following options:

25
Very high allows only macros installed in trusted locations to run. All other signed and unsigned macros
are disabled.
High allows only signed macros from trusted sources to run. Unsigned macros are automatically
disabled.
Medium lets you choose which macros run, even if they are potentially harmful.
Low (not recommended) allows all potentially unsafe macros to run. Enable this setting if you have
virus-scanning software installed, or if you check the safety of all documents that you open.
5 On the Trusted publishers page of the Security dialog box, review which macro publishers are trusted. Click
View to display details on the selected macro publisher, or click Remove to delete the selected macro
publisher from the list.
If desired, you can enable or disable the Trust access to Visual Basic project check box for the selected
macro publisher.
6 Disable the Delay load VBA check box if you want to load the VBA feature at start-up.
Using the Macros toolbar

CorelDRAW and Corel PHOTO-PAINT feature a Macros toolbar that provides easy access to several macrorelated featues, such as the Macro Editor.
The Macros toolbar in CorelDRAW
The Macros toolbar in Corel PHOTO-PAINT

Using the Macros toolbar in CorelDRAW
In CorelDRAW, the Macros toolbar features the following buttons:

Macro Manager button
Run Macro button
opens the Macro Manager docker
runs a macro
Macro Editor button
opens the Macro Editor
Disable application events button

running macros
Start Recording button
Pause Recording button
Stop Recording button
switches the Macro Editor between its modes for designing and
records a macro
pauses the recording of a macro
stops the recording of a macro
To display the Macros toolbar in CorelDRAW, click Window ` Toolbars ` Macros. A check mark next to the
command indicates that the toolbar is displayed.

26
Using the Macros toolbar in Corel PHOTO-PAINT
In Corel PHOTO-PAINT, the Macros toolbar features the following buttons:

Macro Manager button
Run Macro button
opens the Macro Manager docker
runs a macro
Macro Editor button
opens the Macro Editor
Disable application events button

running macros
switches the Macro Editor between its modes for designing and
To display the Macros toolbar in Corel PHOTO-PAINT, click Window ` Toolbars ` Macros. A check mark
next to the command indicates that the toolbar is displayed.
Using the Macro Manager docker

In CorelDRAW and Corel PHOTO-PAINT, macros are stored in code modules, which are stored in macro
projects. The Macro Manager docker provides a list of all existing VBA macro projects, plus the code modules
and macros that are stored in them. You can use the Macro Manager docker to perform various tasks related to
macro projects, code modules, and macros (see Creating macros on page 42).
The Macro Manager docker in CorelDRAW, with a macro selected
The Macro Manager docker in Corel PHOTO-PAINT, with a macro selected

27
To display the Macro Manager docker, do one of the following:

Click Tools ` Macros ` Macro Manager.
Click the Macro Manager button
on the Macros toolbar.
Using the Add-in Manager

An add-in is a separate module that extends the functionality of an application. The Add-in Manager for
CorelDRAW and Corel PHOTO-PAINT displays a list of all registered add-ins for the application.
The Add-in Manager
To open the Add-in Manager, click Tools ` Macros ` Add-in Manager. You can then use the Add-in Manager
to perform various tasks related to add-ins.
You can use a registered add-in by clicking Tools ` Macros ` Add-ins and then choosing the add-in.
Using the Macro Editor

CorelDRAW and Corel PHOTO-PAINT provide an integrated development environment (IDE) for creating
VBA macro projects. Called the Macro Editor, this IDE is similar to the one included with the full version of
Visual Basic. You can use the Macro Editor to perform various tasks related to VBA macros, such as the
following:
browsing the contents of a VBA macro project
developing and debugging VBA macro code
setting object properties for VBA macros
creating dialog boxes or forms for VBA macros
You cannot use the Macro Editor to compile executable (EXE) program files.

28
The Macro Editor features three main areas:

Project Explorer lets you browse macro projects and their contents. For more information, see Using the
Project Explorer on page 30.
Code window lets you work with macro code. For more information, see Using the Code window on
page 31.
Properties window lists all editable properties for the selected object. For more information, see Using
the Properties window on page 34.
The Macro Editor also features four main toolbars:
Standard toolbar is the default toolbar
Debug toolbar contains buttons for common debugging tasks
Edit toolbar contains buttons for common code-editing tasks
UserForm toolbar contains buttons specific to designing dialog boxes
For more information on these toolbars, see Using the Macro Editor toolbars on page 35.
4
5
1
The Macro Editor (CorelDRAW version shown) features the following:

1) Project Explorer; 2) Code window; 3) Properties window;
4) Standard toolbar; 5) Debug toolbar; 6) Edit toolbar;
7) UserForm toolbar
The Macro Editor also lets you access the Object Browser, which displays the entire object model of each
referenced component and of the host application. For more information, see Using the Object Browser on
page 35.
Although the Macro Editor opens in a separate window from its host application, it runs within the process of
that application. To display the Macro Editor, do any of the following:
Click Tools ` Macros ` Macro Editor on the main menu in the application.
Click the Macro Editor button
on the Macros toolbar.
Right-click Visual Basic for Applications in the Macro Manager docker, and then click Show IDE.
Press Alt + F11.

29
To switch between the Macro Editor and the application, use the Windows taskbar, or press Alt + F11
or Alt + Tab.
For more detailed information on constructing code procedures and setting properties, please see the
Microsoft Visual Basic for Applications Help file, which is available from the Help menu in the Macro Editor.
Using the Project Explorer

The Project Explorer is essential for navigating macro projects and their contents: documents and objects, forms,
modules, and class modules (or classes).
Each type of component in the Project Explorer has an icon assigned to it:
Icon
Item
macro project
folder
document or object
(CorelDRAW)
document or object
(Corel PHOTO-PAINT)
form
module
class module (or class)
To display or hide the Project Explorer, do any of the following:

Click View ` Project Explorer.
Click the Project Explorer button
Press Ctrl + R.
on the Standard toolbar.

30
Using the Code window

The Code window is where you spend most of your time when working on macros. A standard code editor in the
style of Microsoft Visual Studio, the Code window lets you do the following:
format code automatically
color syntax automatically
check syntax automatically
jump to definitions
use contextual pop-up lists and automatic completion
If you are already familiar with any of the Microsoft Visual Studio editors, the Code window will be entirely
familiar to you.
The Code window
To display the Code window, do one of the following:

Click View ` Code.
Press F7.
Formatting code automatically
The Macro Editor formats code automatically for you. Even the capitalization of keywords, functions,
subroutines, and variables is taken care of by the Macro Editor, irrespective of what you type. You cannot
custom-format code, although you can set the indentation for each line, as well as the placing of custom line
breaks.
If you use the returned value when calling a function, the parentheses around the parameters are mandatory (just
as in most modern programming languages):
a = fooFunc (b, c)
However, if the returned value from a function call is being discarded, or if you are calling a subroutine, the

31
parentheses must be left out (unlike in most other languages):

barFunc d, e
fooBarSub f
If you prefer always to see the parentheses, use the Call keyword before the function call or subroutine call:
Call barFunc (d, e)
Call fooBarSub (f)
Coloring syntax automatically
As you develop code in the Code window, the Macro Editor colors each word according to its classification.
Word color
Classification
Blue
Automation keyword or programming statement
Green
Comment
Black
All other text
The Code window also uses the following colorization techniques:

Colorization technique
Classification
Red text
Line of code containing errors
White text on blue background
Selected text
Text highlighted in yellow
Line where execution is paused for debugging
White text on red background and red dot in the left

margin
Breakpoint set for debugging purposes
Blue dot in the left margin
Bookmark set in the code
For more information, see Setting breakpoints on

page 52.
These syntax-colorization techniques make the code much easier to read.

32
Syntax coloring and highlighting
Breakpoints and bookmarks are lost when you quit the application.
The Macro Editor lets you modify the default colors for syntax highlighting. Click Tools ` Options, and
choose your settings on the Editor Format page.
Checking syntax automatically
Every time you move the cursor out of a line of code, the Macro Editor checks the syntax of the code in that line;
if an error is found, the line is colored red and a pop-up warning is displayed. This real-time checking is useful
(particularly when you are learning to program macros) because it indicates many possible errors in the code
without having you run the code.
The Macro Editor lets you disable pop-up warnings. Click Tools ` Options, click the Editor tab, and
then disable the Auto Syntax Check check box. Although the Macro Editor still checks the syntax and
colors erroneous lines red, it stops displaying a warning when you paste text from another line of code.
Jumping to definitions
The Macro Editor lets you jump directly to the definition of a variable, function, or object.
Desired definition
Procedure
Destination
Variable
Right-click the variable in the Code

window, and then click Definition.
The definition of the variable in the

code
Function
Right-click the function in the Code

The definition of the function in the

code
Object
Right-click the object in the Code

The definition of the object in the

Object Browser
To return to where you requested the definition, right-click anywhere in the Code window, and then
click Last Position.
Using contextual pop-up lists for automatic completion
The Macro Editor adds the functions you write and the variables you define to an internal list that contains all
built-in keywords and enumerated values. As you type, the Macro Editor displays a contextual list of words that

33
are valid candidates for insertion at the current position. This auto-completion feature makes code development
quicker and more convenient.
An auto-completion pop-up list
If you type the first few characters of the word you want to use, the pop-up list advances to the nearest candidate
that matches those characters. Select the desired word, and then do one of the following:
type the character to follow the word (typically a space, line feed, parenthesis, period, or comma)
enter only the word by pressing Tab or Ctrl + Enter
To force the pop-up menu display, press Ctrl + Spacebar; the menu scrolls to the word that most closely
matches the characters that you have typed so far. This technique is particularly useful for filling
parameter lists when calling a function or subroutine. If there is only one exact match, the Macro Editor
inserts the word without popping up the list; to display the pop-up list for the selected keyword at any
time without auto-filling it, press Ctrl + J.
Using the Properties window

The Properties window lists all editable properties for the selected object. Many macro objects including
projects, modules, and forms and their controls have property sheets that can be modified.
The Properties window, with the properties of a form displayed
The Properties window is automatically updated when you select an object, or when you change the properties
of the selected object by using other methods (for example, by using the mouse to move and resize form
controls).

34
To display or hide the Properties window, do any of the following:

Click View ` Properties Window.
Click the Properties Window button
Press F4.
Using the Macro Editor toolbars

The Macro Editor features four toolbars Standard, Debug, Edit, and UserForm that you can use to
perform macro-related tasks.
The Standard toolbar is the default toolbar.
The Standard toolbar (CorelDRAW version shown)
The Debug toolbar contains buttons for common debugging tasks (see Debugging macros on page 50).
The Debug toolbar
The Edit toolbar contains buttons for common code-editing tasks.
The Edit toolbar
The UserForm toolbar contains buttons specific to designing dialog boxes (see Designing dialog boxes on
page 58).
The UserForm toolbar
To display or hide a toolbar, click View ` Toolbars, and then click the corresponding command. A check mark
next to a command indicates that its toolbar is currently displayed.
You can float a toolbar by dragging it from the menu bar.
You can dock a toolbar by dragging it to the menu bar.
Using the Object Browser

The Object Browser is one of the most useful tools that is provided by the Macro Editor. In an easy-to-use,
structured format, the Object Browser displays the entire object model of each referenced component and, most
importantly, of CorelDRAW and Corel PHOTO-PAINT.
Referenced components include all ActiveX or Object Linking and Embedding (OLE) objects that are
used by the project.

35
The Object Browser window features the following items:

Project/Library list box lists all referenced components (projects and libraries). Choosing a project or
library from this list updates the Object Browser to display only the items for that project or library.
Generally, displaying only one project or library at a time makes it easier to use the Object Browser.
navigation buttons let you cycle through your selections from the Object Browser
Copy to Clipboard button copies the current selection to the Clipboard
View Definition button displays where the current selection is defined in the Code window
Help button displays a Help topic for the current selection. You can also access this Help topic by pressing
F1.
search controls let you search the selected project or library for a given string. For more information, see
Using the search controls on page 40.
Search Results window displays the results of a search. For more information, see Using the search
controls on page 40.
Class list displays all class-related items for the selected project or library. For more information, see Using
the Class list on page 37.
Member list displays the members of the selected class. For more information, see Using the Member list
on page 38.
Information window displays information about the selected class or class member. For more information,
see Using the Information window on page 39.
navigation
buttons
Project/
Library
list box
Help
button
search
controls
Search
Results
window
View
Definition
button
Class list
Copy to
Clipboard
button
Member
list
Information
window
The Object Browser window (Corel PHOTO-PAINT version shown)
To open the Object Browser from within the Macro Editor, do any of the following:
Click View ` Object Browser.
Click the Object Browser button
Press F2.
To reference the object model of another application, click Tools ` References. Referenced components
can be accessed by the macro code.

36
Using the Class list
Every project and library has an object model that contains the following class-related items, which are displayed
in the Class list: global values, classes, modules, types, and enumerations.
Global values apply to an entire project or library, and they include individual members from enumerations (such
as text-paragraph alignments, shape types, and import/export filters).
Classes contain properties, methods, and events. For more information, see What is a class? on page 11.
For documentation on all classes available to CorelDRAW or Corel PHOTO-PAINT, see the Object
Model Reference | Classes section of the Macros Help file for the application.
Modules contain macro code.
For documentation on all modules available to CorelDRAW, see the Object Model Reference |
Modules section of the Macros Help file for the application.
Types are customized data types that supplement the built-in data types that are provided by the automation
environment (see Declaring variables on page 13).
For documentation on all types available to CorelDRAW, see the Object Model Reference | Types
section of the Macros Help file for the application.
Enumerations represent fixed values in the procedures and functions of the coding for a macro. For more
information, see What is an enumeration? on page 12.
For documentation on all enumerations available to CorelDRAW or Corel PHOTO-PAINT, see the
Object Model Reference | Enumerations section of the Macros Help file for the application.
Each type of item in the Class list has an icon assigned to it:
Icon
Item
global value
class
module
type
enumeration
To access the Help topic for a selected item, click the Help button, or press F1.

37
Using the Member list
When you choose an item from the Class list, the members of that item appear in the Member list. Class
members include the following:
properties
methods
events
constants
A property can be a simple type (such as a Boolean, integer, or string), or it can be a class or enumeration from
the Class list. A property that is based on a class from the Class list inherits all members of that class.
Many classes have a default property. The default property is implied if no property name is given when getting
or setting the value of the parent object. For example, collection types have the default property Item, which can
be indexed; in such instances, it is not necessary to specify the Item property. Here,
ActiveSelection.Shapes.Item(1).Selected = False
is the same as the shorter

ActiveSelection.Shapes(1).Selected = False
because Item is the default or implied property of a collection of shapes.

For documentation on all properties available to CorelDRAW or Corel PHOTO-PAINT, see the Object
Model Reference | Properties section of the Macros Help file for the application.
Methods are commonly known as member functions functions that a class can perform on itself. A good
example is the Move method of the Shape class in CorelDRAW, which moves a shape by using an [x, y] vector.
The following code moves the selected shapes 2 measurement units to the right and 3 measurement units
upwards:
ActiveSelection.Move 2, 3
If the return value of a function is not used, the function call does not take parentheses around the argument list
unless the Call keyword is used.
For documentation on all methods available to CorelDRAW or Corel PHOTO-PAINT, see the Object
Model Reference | Methods section of the Macros Help file for the application.
Events are associated with some classes. You can set up an event handler that is called when that event occurs in
the application; this functionality lets you develop sophisticated applications that respond automatically to what
is happening within the application. Commonly handled events include the BeforePrint, BeforeSave,
PageActivate, SelectionChange, and ShapeMove events of the Document class in CorelDRAW.
For documentation on all events available to CorelDRAW or Corel PHOTO-PAINT, see the Object
Model Reference | Events section of the Macros Help file for the application.
The constants displayed in the Member list are members of enumerations or are defined as public in a module.
Enumerations group related items from a closed list such as CorelDRAW shape types, import/export filters,
and alignments for use anywhere an integer value is required.

38
In CorelDRAW and Corel PHOTO-PAINT, many constants begin with cdr (for example, cdrEPS and
cdrLeftAlignment), while others begin with clr, cui, pdf, pnt, or prn. Visual Basic also has its own constants,
including ones (such as vbKeyEnter) for keystrokes and ones (such as vbOK) for dialog-box buttons.
For documentation on all constants available to CorelDRAW or Corel PHOTO-PAINT, see the Object
Model Reference | Constants section of the Macros Help file for the application.
Each type of item in the Member list has an icon assigned to it:
Icon
Item
property
default property
method
event
constant
To access the Help topic for a selected item, click the Help button, or press F1.
Using the Information window
The Information window provides information about the selected class or class member. This information
includes the following:
a prototype of the item
an indication of whether the item is a read-only property
the parent of the item
a short description of the item
The Information window for the Document.Application property

in Corel PHOTO-PAINT
The Information window provides hyperlinks to all referenced types and classes that are defined within the
current object model. For example, the information for the Document.Application property in
Corel PHOTO-PAINT (see the preceding figure) includes the following hyperlinks:
Application accesses the Application class, because Application is both the type of the
Document.Application property and a class in the PHOTOPAINT library
PHOTOPAINT accesses the class for the PHOTOPAINT library, which contains all classes in the
Corel PHOTO-PAINT object model

39
Document accesses the Document class, which is the parent of the Application property
When the Information window is not tall enough to reveal its complete contents, a scroll bar is provided.
To increase the height of the Information window, drag the top border of the window upwards.
Using the search controls
The search controls let you search the selected project or library for a given string. Searching is useful when you
can only partly remember the name of a class or class member, or when you want to find classes and members
that have similar names (such as those containing the word open).
Searching the CorelDRAW object model
To search the classes and members of the selected object model, type a string into the Search box, and then click
the Search button
. The Search Results window displays, in alphabetical order, all matches. Clicking a
match advances the Class list and Member list to that item and displays the Information window for that item.
Matching class names have a blank Member column in the Search Results window.
To hide the Search Results window, click the Hide Search Results button
Using the VSTA Editor

CorelDRAW and Corel PHOTO-PAINT provide an integrated development environment (IDE) for creating
VSTA macro projects. Called the VSTA Editor, this IDE is similar to the Macro Editor (which is the IDE for
VBA macro projects in CorelDRAW and Corel PHOTO-PAINT). You can use the VSTA Editor to perform
various tasks related to VSTA macros.

40
By default, the software creates VSTA folders at the following location:

for CorelDRAW: My Documents\Corel\VSTA\CorelDRAW
for Corel PHOTO-PAINT: My Documents\Corel\VSTA\Corel PHOTO-PAINT
Be sure to load VSTA add-ins from the following location:
for CorelDRAW: My Documents\Corel\VSTA\CorelDRAW\Addins
for Corel PHOTO-PAINT: My Documents\Corel\VSTA\Corel PHOTO-PAINT\Addins
You can open the VSTA Editor from within CorelDRAW or Corel PHOTO-PAINT. Although the VSTA Editor
opens in a separate window, it runs within the process of its host application. To open the VSTA Editor, do any of
the following:
Click Tools ` Macros ` VSTA Editor on the main menu in the application.
Press Alt + Shift + F12.
To switch between the VSTA Editor and the application, use the Windows taskbar, or press
Alt + Shift F12 or Alt + Tab.
For more detailed information on VSTA and its programming environment, please consult the Help menu in the
VSTA Editor.

41
Creating macros
Now that you are familiar with the concept of automation and with the macro-related tools and features of
CorelDRAW and Corel PHOTO-PAINT, you are ready to create macros.
In this section

Creating macro projects on page 42
Writing macros on page 45
Recording macros on page 46
Running macros on page 49
Debugging macros on page 50
Creating macro projects

The process of creating a macro begins with creating a macro project. A macro project can be created in one of
two ways:
as a Global Macro Storage (GMS), or project, file
in a document
Using GMS files
For best results in storing and distributing a macro project, it is highly recommended that you use a GMS file.
GMS files are stored in the GMS folder for the application, the location of which depends on the type of macro
project.
Macro-project type
GMS folder
Default projects installed with

the software
X:\Program Files\Corel\<suite>\<program>\GMS
User-created projects on
Windows 7 and Windows
Vista
Legend:
X: is the drive and Program Files\Corel\<suite> is the path where the software
suite is installed
<program> is the program subfolder
X:\Users\<username>\AppData\Roaming\Corel\<suite>\<program>\GMS
Legend:
X: is the drive where the software is installed
<username> is the name of the user
<suite> is the folder where the software suite is installed
<program> is the application subfolder

Creating macros
42
Macro-project type
GMS folder
User-created projects on
Windows XP
X:\Documents and Settings\<username>\Application Data\Corel\<folder>\

<application>\GMS
Legend:
X: is the drive where the software is installed
<username> is the name of the user
<suite> is the folder where the software suite is installed
<program> is the program subfolder
Understanding macro projects
The Macro Manager docker provides basic tools for working with macro projects. For access to more advanced
tools, you can use the Macro Editor (for VBA macro projects) or the VSTA Editor (for VSTA macro projects).
In the Macro Editor, a VBA macro project is broken into four types of components, which are displayed as the
following folders in the Project Explorer (see Using the Project Explorer on page 30):
<application> Objects contains a single item that is used mostly for event handling: ThisMacroStorage
for GMS-based macro projects, or ThisDocument for document-based macro projects. For normal code, this
module is not used.
Forms contains customized dialog boxes and user interfaces, plus the code to control them
Modules contains code modules, for storing general code and macros
Class Modules contains object-oriented Visual Basic class modules (which are not discussed in this
documentation)
In the Macro Editor, you cannot move a component from one folder to another within the same project.
However, you can drag a component to another project to make a copy of it there.
Related procedures
For details on creating macro projects, see the following procedures:

To create a macro project on page 43
To add a dialog box to a macro project on page 44
To add a code module to a macro project on page 44
To add a class module to a macro project on page 45
To create a macro project

In the Macro Manager docker, do one of the following:
Click Visual Basic for Applications in the list, click New, and then click New macro project.
Right-click Visual Basic for Applications in the list, and then click New macro project.
Project names must follow normal variable-naming conventions: They must begin with an alphabetic
character, and they must not contain spaces nor special characters other than underscores ( _ ).

Creating macros
43
You can also

Load a macro project
Do one of the following:

Click Visual Basic for Applications in the list, click Load, and then
choose the project.
Right-click Visual Basic for Applications in the list, click Load
macro project, and then choose the project.
Rename a macro project
Right-click the project in the list, and then click Rename.

You can also rename a macro project from within the Macro Editor.
Click the project in the Project Explorer, and then edit the (Name)
value in the Properties window. Press Enter to commit your
changes.
Copy a GMS-based macro project
Right-click the project in the list, click Copy to, and then choose the
target location for the copy.
NOTE: You cannot copy a document-based macro project. Such
projects are stored within a document and cannot be managed
separately from that document.
Unload a GMS-based macro project
Right-click the macro project in the list, and then click Unload
macro project.
NOTE: You can close a document-based macro project only by
closing the document in which it is stored.
Some macro projects are locked and cannot be modified.
To add a dialog box to a macro project

1 In the Project Explorer of the Macro Editor, right-click the project.
2 Click Insert ` UserForm.
A form is added to the Forms folder for the project.

For more information, see Providing dialog boxes for macros on page 56.
To add a code module to a macro project

In the Macro Manager docker, click the project in the list, click New, and then click New module.
In the Macro Manager docker, right-click the project in the list, and then click New module.
In the Project Explorer of the Macro Editor, right-click the project, and then click Insert ` Module.

Creating macros
44
You can also

Display or hide all code modules in the Macro Manager
docker
In the Macro Manager docker, click the Simple mode

button .
Edit a code module

Click the module in the list, and then click the Edit button
.
Right-click the module in the list, and then click Edit.
The code module opens in the Macro Editor.
Rename a code module
In the Macro Manager docker, right-click the module in

the list, and then click Rename.
Delete a code module

Click the module in the list, and then click the Delete
button .
Right-click the module in the list, and then click Delete.
To add a class module to a macro project

1 In the Project Explorer of the Macro Editor, right-click the project.
2 Click Insert ` Class Module.
A new class module is added to the Class Modules folder for the project.
Detailed documentation on creating class modules is beyond the scope of this documentation.
Writing macros
You can manually code a macro by writing it in the Macro Editor or the VSTA Editor. (Alternatively, in
CorelDRAW, you can create a VBA macro by recording it. For information, see Recording macros on page 46.)
Macros that are developed in the Macro Editor or the VSTA Editor can take advantage of full programming
control, including conditional execution, looping, and branching. In effect, you can write macros that are
programs in their own right.
In this documentation, all macro code is referred to as a macro. In some contexts, however, a macro is
just those parts of the code that can be run by CorelDRAW or Corel PHOTO-PAINT.
To write a macro, you must first add it to a code module for the desired macro project. You can edit, rename, or
even delete macros.
For details on writing macros, see the following procedures:
To add a macro to a macro project on page 46

Creating macros
45
To edit a VBA macro on page 46

To delete a VBA macro on page 46
To add a macro to a macro project

Click the desired container module in the macro project, click New, and then click New macro.
Right-click the desired container module in the macro project, and then click New macro.
To edit a VBA macro

Click the macro in the list, and then click the Edit button
Right-click the macro in the list, and then click Edit.
The macro opens in the Macro Editor.

For detailed information on manually coding macros, see How is automation coding structured? on
page 13.
To delete a VBA macro

Click the macro in the list, and then click the Delete button
Right-click the macro in the list, and then click Delete.
Recording macros
CorelDRAW offers a recording feature that lets you create a macro without needing to manually code it. For
many simple and repetitive tasks, recorded macros are a quick, efficient solution: They store the sequence of keys
that you press and the mouse actions that you perform within the application. You may prefer to create macros
by recording them if you are not familiar with the object model for the application, or if you are not sure which
objects and methods to use.
In Corel PHOTO-PAINT, actions can be recorded as Corel SCRIPT scripts but not as VBA or VSTA
macros. For information on recording scripts, see Working with scripts in the main Help file for
Corel PHOTO-PAINT (corelpp.chm).

Creating macros
46
If you want to store a recorded macro for future use, you can save it by using the Record Macro dialog box.
Saving a recorded macro is particularly useful if you want to extend or customize its functionality by editing it in
the Macro Editor.
The Record Macro dialog box
However, if you want to use a recorded macro during the current session only, you can record a temporary macro.
For details on recording macros, see the following procedures:
To record and save a macro on page 47
To record a temporary macro on page 48
To record and save a macro

1 Do one of the following:
Click Tools ` Macros ` Start recording, or click the Start recording button
on the Macros toolbar,
to store the macro in the default macro project for recordings.
In the Macro Manager docker, click the project in which to store the macro, and then click the Record
button .
The Record Macro dialog box appears.
2 In the Macro name box, type a name for the macro.
Macro names can contain numerals, but they must begin with a letter. Macro names cannot contain spaces or
non-alphanumeric characters other than underscores ( _ ).
3 Type a description of the macro in the Description box, and then click OK.
4 Perform the actions that you want to record.
The application begins recording your actions. If you want to pause recording, do one of the following:
Click Tools ` Macros ` Pause recording. Repeat this step to resume recording.
Click the Pause recording button
step to resume recording.
on the Macros toolbar or in the Macro Manager docker. Repeat this

Creating macros
47
5 To stop recording, do one of the following:
Click Tools ` Macros ` Stop recording.

Click the Stop recording button
Press Ctrl + Shift + O.
on the Macros toolbar or in the Macro Manager docker.
You cannot record a macro if all available macro projects are locked..
Not all actions can be recorded some because of their complexity (although many such actions can be
manually coded in the Macro Editor). When an action cannot be recorded, a comment is placed in the
macro code (The recording of this command is not supported.), but the recording process
continues until you stop it. You can view any comments in the code by opening the macro in the
Macro Editor.
You can specify the default macro project for recordings by right-clicking the project in the Macro
Manager docker, and then clicking Set as recording project. However, you cannot specify a locked
macro project.
You can cancel recording a macro, and discard any commands recorded thus far, by clicking Tools `
Macros ` Cancel recording.
You can also
Save the actions in the Undo list as a VBA macro
Click Tools ` Undo, perform the actions that you want to

record, and then click the Save list to a VBA macro
button
in the Undo docker.
To record a temporary macro

1 Do one of the following:
Click Tools ` Macros ` Record temporary macro.

Press Ctrl + Shift + R.
2 Perform the actions that you want to record.
The application begins recording your actions. If you want to pause recording, do one of the following:
Click Tools ` Macros ` Pause recording. Repeat this step to resume recording.
Click the Pause recording button
step to resume recording.
on the Macros toolbar or in the Macro Manager docker. Repeat this
3 To stop recording, do one of the following:
Click Tools ` Macros ` Stop recording.

Click the Stop recording button
on the Macros toolbar or in the Macro Manager docker.
Press Ctrl + Shift + O.
The macro is temporarily saved to the default recording project. When the current session is ended, the macro
is deleted from that project.
You cannot record a temporary macro if all available macro projects are locked.
Not all actions can be recorded.

Creating macros
48
You can specify the default recording project by right-clicking the project in the Macro Manager docker,
and then clicking Set as recording project. (You cannot specify a locked macro project.) If you want,
you can create multiple temporary recordings by assigning each one to its own macro project.
You can cancel recording a macro, and discard any commands recorded thus far, by clicking Tools `
Macros ` Cancel recording.
Running macros
You can run saved macros in one of two ways:
from directly within CorelDRAW or Corel PHOTO-PAINT
from within the Macro Editor
The Run Macro dialog box
You can also run any temporary macro recorded in CorelDRAW.

For details on running macros, see the following procedures:
To run a saved macro on page 49
To run a temporary macro on page 50
To run a saved macro

Click Tools ` Macros ` Run macro, or click the Run macro button
on the Macros toolbar. From the
Macros in list box, choose the project or file in which the macro is stored. From the Macro name list,
choose the macro. Click Run.
In the Macro Manager docker, double-click the macro in the list.
In the Macro Manager docker, click the macro in the list, and then click the Run button .
In the Macro Manager docker, right-click the macro in the list, and then click Run.
In the Macro Editor, click anywhere in the subroutine that forms the macro, and then click Run ` Run
macro.

Creating macros
49
To run a temporary macro

Click Tools ` Macros ` Run temporary macro.

Press Ctrl + Shift + P.
This option is enabled only after you record a temporary macro.
If you have created multiple temporary macros, you must specify which macro project contains the one
that you want to run. Right-click the project in the Macro Manager docker, and then click Set as
recording project.
Debugging macros
To ensure that your macros run as expected, its important to debug them.
The Macro Editor provides four windows for debugging VBA code. The Macro Editor also provides two strong
debugging facilities that are common to language editors: setting breakpoints, and stepping through code.
The Macro Editor also supports two advanced debugging techniques that are not discussed in this
documentation: Making changes to the code while it is running, and watching and changing variables.
Using the debugging windows
The Macro Editor provides four windows for debugging VBA code: the Call Stack window, the Immediate
window, the Locals window, and the Watches window. All of these windows provide important information
about the state of functions and variables while an application is running.
The Call Stack window is a modal dialog box that lists which function calls which function. In long, complicated
applications, this information is useful for tracing the steps to a particular function being called. To visit a
function listed in the window, select the function name and then click Show, or else close the window.
To display the Call Stack window, click View ` Call Stack.
The Call Stack window
The Immediate window lets you type in and run arbitrary lines of code while a macro is paused. This
functionality is useful for getting or setting the property of an object in the document, or for setting the value of
a variable in the code. To run a piece of code, type it in the Immediate window, and then press Enter; the code
is executed immediately.

Creating macros
50
To display the Immediate window, click View ` Immediate window.
The Immediate window
The Locals window displays all variables and objects that exist within the current scope. The type and value for
each variable are listed in the columns next to the name of the variable. Some variables and objects have several
children, which can be displayed by clicking the button next to the parent. Many variables let you edit their
value by clicking it.
To display the Locals window, click View ` Locals window.
The Locals window
The Watches window is used to watch specific variables or object properties. This functionality is useful for
watching just one or two values rather than searching for them among all the values in the Locals window.
To display the Watches window, click View ` Watch window.

Creating macros
51
The Watches window
To add a value to the Watches window, do one of the following:

Select the variable or object and its property, and then drag the selection onto the Watches window.
Click the item, and then click Debug ` Quick watch.
The Add Watch dialog appears.
The Add Watch dialog box
Select the item that you want to watch, select any conditions for this watch, and then click OK. If the condition
becomes true, the application pauses to let you examine the code.
Setting breakpoints
A breakpoint is a marker in a line of code that causes execution to pause. To continue, you must either restart the
execution or step through the subsequent lines of code.
To set or clear a breakpoint, click the line, and then click Debug ` Toggle breakpoint. By default, the line is
highlighted in dark red, and a red dot is placed in the margin.
To restart the code after it pauses at a breakpoint, click Run ` Continue. To pause the execution of the code
(immediately exiting from all functions and discarding all return values), click Run ` Reset.
You can also run to cursor that is, execute the code until it reaches the line that the cursor is on, and then
pause at that line. To do this, click the line where you want execution to pause, and then click Debug ` Run to
cursor.
To clear all breakpoints, click Debug ` Clear all breakpoints.

Creating macros
52
If the line with the breakpoint (or the cursor, when running to cursor) is not executed because it is in a
conditional (if-then-else) block, the code does not stop at that line.
Breakpoints are not saved. They are lost when you close the Macro Editor.
Stepping through the code
When execution pauses at a breakpoint, you can continue through the code one line at a time. This functionality,
called stepping through the code, lets you do the following:
examine the values of individual variables after each line
determine how the code affects the values
determine how the values affect the code
To step through the code, click Debug ` Step into. The execution advances to every line in all called functions
and subroutines.
To step through each line of the current function or subroutine but not through the lines of each called function
or subroutine, click Debug ` Step over. The called functions and subroutines are executed, but not line-by-line.
To execute the rest of the current function or subroutine but pause when the function or subroutine returns to
the point where it was called, click Debug ` Step out. This technique is a quick way of returning to the point of
entry of a function, to continue stepping through the code of the calling function.

Creating macros
53
Making macros user-friendly

An important part of many macro solutions is the user interface. A well-designed interface improves the ease-ofuse, power, and acceptance of a macro solution. Simple user interfaces can be created with toolbars, while more
complex interfaces can be created with dialog boxes or dockers and can even allow the user to interact with
the mouse.
However, for some macro solutions, a user interface alone is not enough. To make a macro solution as userfriendly as possible, you can provide documentation for it.
In this section

Providing toolbars for macros on page 54
Providing dialog boxes for macros on page 56
Providing user interaction for macros on page 64
Providing documentation for macros on page 66
Providing toolbars for macros

A toolbar provides a basic interface that enhances the users experience with your macro solution. Toolbars are
useful because their buttons are memorable even if small, and because those buttons can be set to display
meaningful captions and helpful tooltips.
Designing toolbars for macros
When creating toolbars, you should plan carefully. Having multiple small toolbars containing a few related
buttons is better than having one big toolbar containing all of the buttons for all of your macros. By breaking
your buttons into small groups, it is much easier to deploy them with the projects to which they belong.
For more information, see the following procedures:
To create a macro toolbar on page 55
To add buttons to a macro toolbar on page 55
Associating images or icons with macros
Macro commands can have an image or icon associated with them. This image or icon can be displayed or hidden
on toolbars and menus, and it can be sized as small (16 16 pixels), medium (32 32 pixels), or large
(48 48 pixels).
For more information, see the following procedure:
To associate an image or icon with a macro on page 55
Setting captions and tooltips for macros
Each macro can have both a caption and a tooltip. The caption is displayed whenever the menu command is used

54
and can be displayed as part of a button, while the tooltip appears when the pointer hovers over the button or
menu item.
For more information, see the following procedures:
To set a caption for a macro on page 55
To set a tooltip for a macro on page 56
To create a macro toolbar

1 Click Tools ` Options.
2 Click Workspace ` Customization ` Command bars.
3 Click New.
4 Type a name for the toolbar.
5 Enable the check box next to the name of the toolbar.
To add buttons to a macro toolbar

1 Click Workspace ` Customization ` Commands.
2 Choose Macros from the Commands list box.
The list displays the fully qualified names of all of the public, parameter-free subroutines from all of the
installed project (GMS) files.
3 Drag a macro from the list to the toolbar.
The macro appears on the toolbar with the default macro icon.
To associate an image or icon with a macro

3 Select a macro in the Command list.
4 Click the Appearance tab, and then do one of the following:
To apply a Windows bitmap (BMP) image to the macro, click Import, navigate to where the image is
stored, and select it. The colors in the image are mapped to their closest available matches.
To create a customized icon for the macro, edit the pixels displayed in the Image area.
To set a caption for a macro

4 Click the Appearance tab, and then type the caption in the Caption box.

55
To specify a character in the caption as an accelerator that can be activated in combination with the Alt key,
type an ampersand ( & ) in front of that character. This accelerator key applies only to menu commands,
which display accelerator characters with an underscore ( _ ).
To set a tooltip for a macro

4 Click the General tab, and then type the tooltip in the Tooltip help box.
Providing dialog boxes for macros

A dialog box provides a user-friendly interface for more complex macro solutions.
For best results, all dialog boxes must provide the following:
a meaningful title
an obvious function for cancelling or closing the dialog box
an easy-to-use layout
a Help button from which users can access how-to documentation
a tooltip (that is, a ControlTipText string) for every control
There are two types dialog boxes: modal and modeless.
Understanding modal dialog boxes
A modal dialog box locks the application until the user acts on and then closes the dialog box. Most built-in
dialog boxes for macro solutions are modal, and most modal dialog boxes provide the following buttons:
OK performs an action and then closes the dialog box. This button is the default.
Cancel closes the dialog box without performing an action. This button provides the same functionality as
the Close button in the upper-right corner of a dialog box.
In addition, some modal dialog boxes provide the following button:
Apply performs an action that can be commited by clicking the OK button or cancelled by clicking the
Cancel button
Finally, most wizard-style dialog boxes provide the following buttons:
Previous returns to the previous page. This button can be disabled on the first page of the dialog box.
Next advances to the next page. This button can be replaced by a Finish button on the last page of the
dialog box.
Finish performs the action for the dialog box and then closes the dialog box

56
Understanding modeless dialog boxes
A modeless dialog box does not lock the application, so the user can leave the dialog box open and continue
working in the application. In this way, modeless dialog boxes behave like dockers. Most modeless dialog boxes
provide the following buttons:
Apply or Create performs an action (and can, in fact, be specially labeled to describe that action). This
button is typically the default.
Close closes the dialog box. This button is used after the action is applied.
Choosing between modal and modeless dialog boxes
Before you can create a dialog box for your macro solution, you must decide whether to make it modal or
modeless by considering what you want the dialog box to achieve.
For example, lets say that you are creating a one-shot end-to-end solution such as a customized Print dialog
box or Save dialog box. In this case, you would provide a modal dialog box because it is unlikely that the user
would want to apply the specified settings repeatedly.
On the other hand, lets say that you are creating a solution for setting up an effect to apply to a selection of
shapes. To let the user specify the desired settings and then apply them repeatedly, you would provide a modeless
dialog box.
After choosing which type of dialog box to provide, you are ready to set it up. For information, see Setting up
dialog boxes on page 57. After setting up a dialog box, you are ready to code it. For information, see Coding
dialog boxes on page 59.
Setting up dialog boxes

The Form Designer in the Macro Editor provides easy access to the tools for setting up a dialog box. You can
access the Form Designer by creating a new, blank dialog box. In the Project Explorer, right-click the project to
which you want to add a dialog box, and then click Insert ` UserForm.
A blank form in the Form Designer

57
The Form Designer provides two main features for designing dialog boxes:
the Form Designer toolbox
The UserForm toolbar
The Form Designer also provides functions for naming and testing dialog boxes.
Designing dialog boxes
The Form Designer toolbox is the main utility for designing dialog boxes. It lets you add controls to a dialog
box by dragging them from the toolbox.
The Form Designer toolbox
The Form Designer toolbox lets you add the following controls to a dialog box:
Icon
Control name
Function
Label
Provides static text, such as instructions or captions
TextBox
Provides an area for typing text. For information on coding this control, see
Providing text boxes in dialog boxes on page 60.
ComboBox
Provides a list from which a single item can be selected; optionally, also provides
an area for typing text. For information on coding this control, see Providing
combination boxes and list boxes in dialog boxes on page 61.
ListBox
Provides a list from which multiple items can be selected. For information on
coding this control, see Providing combination boxes and list boxes in dialog
boxes on page 61.
CheckBox
Provides a check box that can be enabled (by clicking to display a check mark),
disabled (by clicking to remove the check mark), or grayed (that is, made
unavailable)
OptionButton
Provides a radio button that is linked to other radio buttons with the same
GroupName property, such that only one of the buttons can be enabled at a time
ToggleButton
Provides a button that can be toggled (to appear pressed or not pressed)

58
Icon
Control name
Function
Frame
Groups items together so that they move with the frame
CommandButton
Provides a button that can be clicked to commit an assigned action. For

information on coding this control, see Providing buttons in dialog boxes on
page 61.
TabStrip
Provides separate views of related controls
MultiPage
Provides multiple pages of controls
ScrollBar
Provides immediate access to a range of values by scrolling
SpinButton
Enhances another control (such as a TextBox control) so that the value for that
control can be set more quickly
Image
Provides an image. For information on coding this control, see Providing images
in dialog boxes on page 63.
The Form Designer toolbox also features a Pick tool

on a dialog box.
, which lets you select and move the controls
To display a Help topic containing information about a selected dialog-box control in the Form Designer,
press F1.
The Form Designer also provides access to the UserForm toolbar, which you can use when designing a dialog
box. For information on this toolbar, see Using the Macro Editor toolbars on page 35.
Naming dialog boxes
After you have finished designing your dialog box, you may want to change its title. Click the dialog box to
select it, and then in the Properties window, change the Caption property.
For clarity, you can give each dialog box a unique, descriptive name by using the Properties window.
However, remember to follow the standard programming conventions for naming variables.
Testing dialog boxes
At any time, you can test your dialog box by pressing F5 to run it.
After you finish setting up your dialog box, you can start coding it. For information, see Coding dialog boxes
on page 59.
Coding dialog boxes

After setting up a dialog box, you can develop the VBA code for displaying it. You can also develop the code for
providing its text boxes, combination boxes and list boxes, buttons, and images.

59
Displaying dialog boxes
The Show method for a dialog box lets you determine how the dialog box is displayed.
For example, the following code uses the Show method to display the dialog box frmFooForm:
frmFooForm.Show
In addition, the Show method provides a Modal parameter, which lets you specify whether the dialog box is
modal or modeless. A value of vbModal (or 1) for this parameter creates a modal dialog box, while a value of
vbModeless (or 0) creates a modeless dialog box. The following VBA example creates a modeless dialog box:
frmFooForm.Show vbModeless
To open a dialog box from a macro that is available from within the application itself, you must create a public
subroutine within a code module. However, a subroutine cannot be made available from within the application if
the subroutine exists either within the code for a dialog box or within a class module. In addition, the subroutine
cannot take any parameters.
The following VBA example subroutine opens frmFooForm as a modeless dialog box:
Public Sub showFooForm()
frmFooForm.Show vbModeless
End Sub
When a dialog box loads, it triggers its own UserForm_Initialize event. From this event handler, you
must initialize all the relevant controls on the dialog box. For more information, see Providing event
handlers on page 23.
Finally, you can also use the Show method to open additional dialog boxes from within the current one, as in the
following VBA example:
UserForm2.Show vbModal
However, control is not returned to you until all open dialog boxes are unloaded.
Providing text boxes in dialog boxes
Text boxes (that is, TextBox controls) are the mainstay of user input. They are simple to use and quick to
program, and they are suitable for a number of purposes.
To set the text in a text box when initializing it, set the Text (default or implicit) property for the TextBox
control, as in the following VBA example:
txtWidth.Text = "3"
txtHeight = "1"

60
To get the value of a TextBox control, get its Text property in the Properties window, as in the following VBA
example:
Call SetSize(txtWidth.Text, txtHeight.Text)
Providing combination boxes and list boxes in dialog boxes
In a combination box (that is, a ComboBox control), the user can either choose an item from the list or type a
value into the text box. You can prevent users from being able to type into a ComboBox control by setting its
Style property (in the Properties window) to fmStyleDropDownList.
In a list box (that is, a ListBox control), the user can choose one or more items (typically, from between three and
ten items) from the list.
To populate a list of any type, you must call the member function AddItem for the list. This function takes two
parameters: the string or numerical value, and the position in the list. The position parameter is optional, so
omitting it inserts the item at the last position in the list. For example, the following VBA code populates the list
ComboBox1 with four items:
ComboBox1.AddItem 1
ComboBox1.AddItem 2
ComboBox1.AddItem 3
ComboBox1.AddItem 0, 0
To test which item is selected when the OK button is clicked, test the ListIndex property for the list.
To get the value of the caption for a selected combination box or list box, test the Text property for the item, as
in the following VBA example:
Dim retList As String
retList = ComboBox1.Text
Providing buttons in dialog boxes
You can add a button to a dialog box by using the CommandButton control. Click the dialog box to add a
default-sized button, or drag to create a custom-sized one. Click the caption to edit it, or select the button and
edit its Caption property in the Properties window. You might also want to change the name of the button to
something more descriptive, such as buttonOK or buttonCancel.

61
Designing buttons in the Form Designer
Most dialog boxes have an OK button and a Cancel button. However, no button functions until its dialog box
has code for handling the click event for the button. (This is because dialog boxes in VBA and VSTA are eventdriven.)
For an OK button, you can set its Default property to True so that the event handler for the button is called
when the user presses Enter to activate the dialog box. That way, the click-event handler for the button performs
the functionality of the dialog box and then unloads that dialog box.
If the dialog box is used to set the size of the selected CorelDRAW shapes by setting their width and height, then
the click-event handler for the OK button could resemble the following VBA code sample (which assumes you
have already created two text boxes called txtWidth and txtHeight):
Private Sub buttonOK_Click()
Me.Hide
Call SetSize(txtWidth.Text, txtHeight.Text)
Unload Me
End Sub
Similarly, the size-setting CorelDRAW subroutine could resemble the following:

Private Sub SetSize(width As String, height As String)
ActiveDocument.Unit = cdrInch
ActiveSelection.SetSize CDbl(width), CDbl(height)
End Sub

62
From inside the code module for the dialog box, the dialog-box object is implicit, so all the controls can be
simply accessed by name. From other modules, the controls must be accessed through their full name (as in
UserForm1.buttonOK).
The Cancel button is the simplest control: it must dismiss the form without doing anything else. To add a cancel
action to a Cancel button, double-click the button from within the Form Designer to display its code in the
Code window. This creates a new subroutine called cmdCancel_Click:
The Code window with code for a Cancel button
The following VBA code, if applied to a Cancel button, dismisses the dialog box when the button is clicked:
Private Sub cmdCancel_Click()
Unload Me
End Sub
If you continue by setting the Cancel property for the dialog box to True, then when the user presses Escape,
the cmdCancel_Click event is triggered and the provided code unloads the form.
Providing images in dialog boxes
The Image control is used to place graphics on a dialog box. The image (a bitmap) is contained in the Picture
property, so you can either load an RGB image from a file (such as a GIF, JPEG, or Windows Bitmap BMP file)
or paste one into the property.
At run time, you can change the Picture property if you want to load a new image into the Image control. To
change the Picture property, use the function LoadPicture and provide a path to the new image file, as in the
Image1.Picture = LoadPicture("C:\Images\NewImage.gif")

63
Providing user interaction for macros

One way to make your macro solutions more user-friendly is to optimize them for user interaction, such as mouse
input. A macro that captures mouse actions gives users real-time influence on the result of that macro.
The CorelDRAW object model provides three main ways to receive mouse input from users, as explained in the
following topics:
Capturing mouse clicks on page 64
Capturing mouse drags on page 65
Capturing coordinates on page 66
Capturing mouse clicks

To get the position of a single mouse click, you can use the GetUserClick method of the Document class. This
method pauses the macro until the specified period of time elapses, or until the user clicks in the document or
presses Escape. Here is a VBA example that uses the Document.GetUserClick method:
Dim doc As Document, retval As Long
Dim x As Double, y As Double, shift As Long
Set doc = ActiveDocument
doc.Unit = cdrCentimeter
retval = doc.GetUserClick(x, y, shift, 10, True, cdrCursorPick)
The following parameters for the Document.GetUserClick method are coded into the preceding example:
The variable x returns the horizontal position of the mouse click.
The variable y returns the vertical position of the mouse click.
The parameter shift returns the combination of the Shift, Ctrl, and Alt keys that is held down by the user
when clicking the mouse. The Shift, Ctrl, and Alt keys are assigned values of 1, 2, and 4 (respectively), the
sum of which is the returned value.
The value 10 specifies the number of seconds for the user to click in the document.
The value True specifies that the SnapToObjects parameter is enabled.
The value cdrCursorPick specifies that the icon for the Pick tool is used for the cursor icon. (You cannot use
a custom icon.)
One of the following values is returned:
0 The user successfully completes the click.
1 The user cancels by pressing Escape.
2 The operation times out.
The returned coordinates are relative to the origin of the page and, unless explicity specified, are in
document units.

64
To get the shapes under the returned click point, you can use the method SelectShapesAtPoint (which is a
member of Page), as in the following VBA example:
doc.ActivePage.SelectShapesAtPoint x, y, True
A value of True selects unfilled objects, while False does not select unfilled objects.
Capturing mouse drags

To get the position of a mouse drag (or an area or rectangle), you can use the GetUserArea method of the
Document class. This method pauses the macro until the specified period of time elapses, or until the user
clicks, drags, and releases in the document or presses Escape. Here is a VBA example that uses the
Document.GetUserArea method:
Dim doc As Document, retval As Long, shift As Long
Dim x1 As Double, y1 As Double, x2 As Double, y2 As Double
doc.Unit = cdrCentimeter
retval = doc.GetUserArea(x1, y1, x2, y2, shift, 10, True, cdrCursorExtPick)
ActivePage.SelectShapesFromRectangle x1, y1, x2, y2, False
The following parameters for the Document.GetUserArea method are coded into the preceding example:
The variables x1 and y1 return the horizontal and vertical positions (respectively) of the upper-left corner of
the area.
The variables x2 and y2 return the horizontal and vertical positions (respectively) of the lower-right corner of
the area.
The parameter shift returns the combination of the Shift, Ctrl, and Alt keys that is held down by the user
when dragging the mouse. The Shift, Ctrl, and Alt keys are assigned values of 1, 2, and 4 (respectively), the
sum of which is the returned value.
The value 10 specifies the number of seconds for the user to click in the document.
The value True specifies that the SnapToObjects parameter is enabled.
The value cdrCursorExtPick specifies the icon to use for the cursor.
In the preceding example, the code ends by selecting the shapes that lie completely within the area by using the
Page.SelectShapesFromRectangle method.
One of the following values is returned:
0 The user successfully completes the selection.
1 The user cancels by pressing Escape.
2 The operation times out.
This method returns two points that are interpreted as the corners of a rectangle. However, the two
points can also be used as the start point and end point of a mouse drag.
The returned coordinates are relative to the origin of the page and, unless explicity specified, are in
document units.

65
Capturing coordinates
When capturing mouse actions, or when developing a complex macro solution, you may want to convert
between screen coordinates and document coordinates. This conversion is done with the methods
ScreenToDocument and DocumentToScreen of the Window class.
The following VBA example converts a set of screen coordinates into a point in the document that is visible in
the active window:
Dim docX As Double, docY As Double
ActiveDocument.Unit = cdrMillimeter
ActiveWindow.ScreenToDocument 440, 500, docX, docY
The following VBA example returns the screen coordinates of a point in the document as it appears on the
screen:
Dim screenX As Long, screenY As Long
ActiveWindow.DocumentToScreen 40, 60, screenX, screenY
In both examples, the converted coordinates are returned in the last two parameters.
Screen coordinates start from the upper-left corner of the screen, so positive y-values are down the screen,
whereas negative y-values are up the screen.
You can test whether a set of coordinates (that is, a point) is inside, outside, or on the outline of a curve by using
the Shape.IsOnShape method. For a set of document coordinates, this method returns one of the following:
cdrInsideShape if the coordinate is inside the shape
cdrOutsideShape if the coordinate is outside the shape
cdrOnMarginOfShape if the coordinate is on or near the outline of the shape
For example, the following VBA code tests where the point (4, 6) is in relation to the active shape:
Dim onShape As Long
onShape = ActiveShape.IsOnShape(4, 6)
Providing documentation for macros

To make a macro as user-friendly as possible, you can provide documentation for it.
One solution is to create a Readme file or a printed manual. Another solution is to incorporate the
documentation directly into the user interface for the macro, but this method uses up valuable on-screen real
estate. Yet another solution is to create an online Help system, but this method requires special tools and a fair
amount of additional work.

66
Perhaps the simplest way to provide macro documentation is in the form of a plain-text file. In fact, upon
installation, a macro project can create a registry value that points to the location of this file. In VBA, the
following function can be used to open a plain-text file (where the parameter file provides the full path to the
file, such as C:\ReadMe.txt):
Public Sub launchNotepad(file As String)
Shell "Notepad.exe" & " " & file, vbNormalFocus
End Sub
A much more powerful solution is to provide documentation in HTML format. HTML provides numerous
benefits over plain-text, including support for graphics and for hypertext links (such as to specific locations in the
document for example, index.html#middle). In VBA, the following function can be used to open an HTML
file (where the parameter url provides the full path to the file such as C:\ReadMe.txt or a URL for the
file):
' Put this Declare statement before all Subs and Functions!
Declare Function ShellExecute Lib "shell32.dll" _
Alias "ShellExecuteA" (ByVal hwnd As Long, _
ByVal lpOperation As String, ByVal lpFile As String, _
ByVal lpParameters As String, ByVal lpDirectory As String, _
ByVal nShowCmd As Long) As Long
Public Sub launchBrowser(url As String)
ShellExecute 0, vbNullString, url, vbNullString, vbNullString, 5
End Sub

67
Organizing and deploying macros

When youve finished developing your macro solution, you can make it available to other users.
In this section

Organizing macros on page 68
Deploying macros on page 68
Organizing macros
To make your macro solutions easy to deploy, you can organize them. Here are some tips:
To sort your macros, use a separate code module for each macro, and then group related macros into a single
GMS file.
To help users find the entry point to a macro, place all public subroutines into a single code module so that the
macro can be called from within the application.
Deploying macros
You can deploy macro solutions to users for installation. You can deploy GMS files or workspaces, or both.
Deploying GMS files
Every document has an intrinsic GMS file. For this reason, you can explicitly distribute a macro as part of a
document because when that document is opened, the user has immediate access to its macros. This deployment
technique lets you, for example, set up a macro to track how much time the user has spent editing a document.
Alternatively, you can distribute the code module that contains the macro. However, this deployment method
requires users to manually integrate the code module into an existing project file.
The simplest and most reliable way to deploy a macro project is to use its GMS file. To begin, you must export
the GMS file from your computer. Then, each user must import the GMS file by using the Macro Manager
docker. For more information, see the following procedures:
To export a GMS file on page 69
To import a GMS file on page 69
Deploying workspaces
Some macro solutions include a customized workspace that contains relevant toolbars, menus, and shortcut keys.
You can deploy the features of a customized workspace to users by creating a Corel workspace (XSLT) file. You
can export a subset of workspace features such as individual menus, individual toolbars, or complete sets of
shortcut keys if you want users to install only those features, or you can export the entire workspace if you

68
prefer. For more information, see To export workspace features on page 69.
Users can install customized workspace features by importing the XSLT files that you provide. For more
information, see To import workspace features on page 69.
In CorelDRAW, users can also import workspace features by using the Application.ImportWorkspace
method.
To export a GMS file

Locate the GMS file on your computer, and make it available to your users.
For help locating this folder, see Using GMS files on page 42.
To import a GMS file

1 Save the GMS file to a GMS folder on your computer.
For help locating this folder, see Using GMS files on page 42.
2 In the Macro Manager docker, do one of the following:
Click Visual Basic for Applications in the list, click Load, and then choose the project.
Right-click Visual Basic for Applications in the list, and then click Load macro project.
To export workspace features

1 Right-click the menu bar, and click Customize ` Workspace ` Export Workspaces.
2 In the list, enable the check boxes next to the workspace features that you want to export:
Dockers includes the sizes and positions of dockers

Menus lets you choose which menus to include
Shortcut Keys includes all available shortcut keys
Status Bar includes the status bar
Toolbars lets you choose which toolbars to include
Enable all check boxes if you want to export the entire workspace.
3 Click Save.
4 In the File name box, type a filename.
The specified workspace features are saved to a single Corel workspace (XSLT) file with the specified filename.
If you want, you can export each workspace feature to a separate file. Simply export one item at a time
to create a series of XSLT files.
When you export shortcut keys, you export all shortcut keys. If you want to distribute only a few keys,
create a new workspace, remove all shortcut keys from it, and then add only the desired keys.
To import workspace features

1 Right-click the toolbar, and click Customize ` Workspace ` Import Workspaces.
2 Click Browse.
3 Select the desired Corel workspace (XSLT) file, and then click Next.

69
4 In the list, enable the check boxes next to the workspace features that you want to import:
Dockers includes the sizes and positions of dockers

Menus lets you choose which menus to include
Shortcut Keys includes all available shortcut keys
Status Bar includes the status bar
Toolbars lets you choose which toolbars to include
Enable all check boxes if you want to import the entire workspace.
5 Click Next.
6 Choose a destination for the workspace features by doing one of the following:
Enable the Current workspace option to import the specified workspace features into the current
workspace, and then click Next.
Enable the New workspace option to import the specified workspace features into a new workspace. Click
Next, and provide details about the workspace. Click Next.
7 Confirm the details of the import, and then click Finish.
The specified workspace features are imported into the specified workspace.
If the name of an incoming toolbar is the same as an existing toolbar, the incoming toolbar is renamed.
If an imported command calls an uninstalled macro, it does not function.

70
Understanding the CorelDRAW object model

In CorelDRAW, the Application object is the root of all other objects and is used if no other root object is
specified.
Documents, pages, layers, shapes, and filters are among the most important objects in the CorelDRAW object
model. Understanding these objects and their relationships to one another is the key to understanding the
CorelDRAW object model.
In this section

Understanding the object-model hierarchy on page 71
Working with the Application object on page 72
Working with documents on page 72
Working with pages on page 91
Working with layers on page 97
Working with shapes on page 102
Working with import filters and export filters on page 138
All code examples in this section are written in VBA.
For a visual representation of the object model, please see the object-model diagram at
X:\Program Files\Corel\<folder>\Data (where X: is the drive and <folder> is the folder where the
software is installed):
Understanding the object-model hierarchy

The main structure of the CorelDRAW object model can be summarized as follows:
The Application object contains a Documents collection of all open Document objects. When a
CorelDRAW document is created or opened, a corresponding Document object is added to the Documents
collection for the Application object.
Each Document object contains a Pages collection of all the Page objects (or pages) in that document.
Each Page object contains a Layers collection of all the Layer objects (or layers) on that page.
Each Layer object contains a Shapes collection of all the Shape objects (or shapes) on that layer.
In addition, the object model contains a set of filter objects, which provide support for files from other technicalgraphics applications. Import filters are governed by the Layer class, while export filters are governed by the
Document class.

71
For a visual representation of the object model, please see the object-model diagram at
X:\Program Files\Corel\<folder>\Data (where X: is the drive and <folder> is the folder where the
software is installed):
Working with the Application object

In CorelDRAW, the Application object is the root of all other objects and is used if no other root object is
specified. You can use the applications Application object to reference the applications object model from an
out-of-process controller.
Dim cdr As CorelDRAW.Application
Set cdr = CreateObject("CorelDRAW.Application")
If desired, you can avoid using the CreateObject keyword in the preceding example by importing the
target type library and using the data types directly.
Working with documents

Each open document, or Document object, is a member of the Application.Documents collection. The
documents in that collection appear in the order in which they were created or opened.
CorelDRAW provide a number of properties, methods, and events for working with documents, the most useful
of which are listed in the following table.
Class
Member
Description
ActiveView
OriginX property
and
OriginY property
Combine to specify the origin of the active view
SetViewPoint method
Specifies the origin of the active view
ActiveView
For more information, see Panning on page 84.
For more information, see Panning on page 84.

ActiveView
Zoom property
Specifies the zoom factor of the active view

For more information, see Zooming on page 84.
AddInHook
New event
Is triggered when a document is created

For more information, see Creating documents on
page 80.
Application
ActiveDocument property
Provides direct access to the active document

For more information, see Activating documents on
page 81.

72
Class
Member
Description
Application
CreateDocument method
or
CreateDocumentFromTemplate method
Create a document
DocumentAfterExport event
Is triggered when a document is exported (that is, when

the Export dialog box closes)
Application

page 80.
For more information, see Exporting files from

documents on page 86.
Application
DocumentAfterPrint event
Is triggered when a document is printed (that is, when the

Print dialog box closes)
For more information, see Printing documents on
page 89.
Application
DocumentAfterSave event
Is triggered when a document is saved (that is, when the

Save dialog box closes)
For more information, see Saving documents on
page 85.
Application
DocumentBeforeExport event
Is triggered when the Export dialog box opens

Application
DocumentBeforePrint event
Is triggered when the Print dialog box opens

page 89.
Application
DocumentBeforeSave event
Is triggered when the Save dialog box opens

page 85.
Application
DocumentClose event
Is triggered when a document is closed

For more information, see Closing documents on
page 91.
Application
DocumentNew event

page 80.
Application
DocumentOpen event
Is triggered when a document is opened

For more information, see Opening documents on
page 80.
Application
Documents property
Contains the collection of open documents

page 81.

73
Class
Member
Description
Application
OpenDocument method
Opens a document
page 80.
Application
QueryDocumentClose event
Is triggered when the user responds to a request to close a

document
page 91.
Application
QueryDocumentExport event
Is triggered when the user responds to a request to export

a document
Application
QueryDocumentPrint event
Is triggered when the user responds to a request to print a

document
page 89.
Application
QueryDocumentSave event
Is triggered when the user responds to a request to save a

document
page 85.
Application
WindowActivate event
Is triggered when a window is activated

page 81.
Application
WindowDeactivate event
Is triggered when a window is deactivated

page 81.
Document
Activate method
Activates a document
page 81.
Document
ActiveWindow property
Provides direct access to the active window for a document

For more information, see Working with windows on
page 82.
Document
AfterExport event


74
Class
Member
Description
Document
AfterPrint event

page 89.
Document
AfterSave event

page 85.
Document
BeforeExport event

Document
BeforePrint event

page 89.
Document
BeforeSave event

page 85.
Document
BeginCommandGroup method
and
EndCommandGroup method
Combine to create a command group that reduces a

series of programmed, document-related actions to a
single, undoable step
For more information, see Creating command groups for
Document
Close event

page 91.
Document
Close method
Closes a document
page 91.
Document
CreateView method
Creates a document view

For more information, see Working with views on
page 83.
Document
Export method,
ExportEx method,
or
ExportBitmap method
Exports a file from a document


75
Class
Member
Description
Document
FilePath property,
FileName property,
or
FullFileName property
Specifies the file path or filename (or both) of a saved

document
GetUserArea method
Returns information about a document area that the user

drags with the mouse
Document

page 81.
For more information, see Capturing mouse drags on

page 65.
Document
GetUserClick method
Returns information about a document position that the

user clicks with the mouse
For more information, see Capturing mouse clicks on
page 64.
Document
Open event

page 80.
Document
Document
Document
PrintOut method
and
PrintSettings property
Combine to print a document by using the specified

settings
PublishToPDF method
and
PDFSettings property
Combine to publish a document to PDF by using the

specified settings
QueryClose event

document

page 89.
For more information, see Publishing documents to PDF

on page 88.

page 91.
Document
QueryExport event

a document
Document
QueryPrint event

document
page 89.

76
Class
Member
Description
Document
QuerySave event

document
page 85.
Document
ReferencePoint property
Specifies the reference point for the document

For more information, see Setting document properties
on page 82.
Document
Document
SaveAs method
or
Save method
Saves a document
Unit property
Specifies the unit of measurement for the document

page 85.

on page 82.
Document
WorldScale property
Specifies the drawing scale for the document

on page 82.
Document
Views property
Contains the collection of views for a document

page 83.
GlobalMacro
Storage
DocumentAfterExport event

GlobalMacro
Storage
DocumentAfterPrint event

page 89.
GlobalMacro
Storage
DocumentAfterSave event

page 85.
GlobalMacro
Storage
DocumentBeforeExport event


77
Class
Member
Description
GlobalMacro
Storage
DocumentBeforePrint event
GlobalMacro
Storage
DocumentBeforeSave event
GlobalMacro
Storage
DocumentClose event
GlobalMacro
Storage
DocumentNew event
GlobalMacro
Storage
DocumentOpen event
GlobalMacro
Storage
QueryDocumentClose event

page 89.
page 85.
page 91.
page 80.
page 80.
document
page 91.
GlobalMacro
Storage
QueryDocumentExport event

a document
GlobalMacro
Storage
QueryDocumentPrint event

document
page 89.
GlobalMacro
Storage
QueryDocumentSave event

document
page 85.
GlobalMacro
Storage
WindowActivate event
Is triggered when a window is activated

page 81.

78
Class
Member
Description
GlobalMacro
Storage
WindowDeactivate event
Is triggered when a window is deactivated
View
Activate method

page 81.
Applies a saved view to the document window
page 83.
Window
Activate method
Activates a document window

page 82.
Window
ActiveView property
Provides direct access to the active view for a document

window
page 83.
Window
Close method
Closes a document window

page 82.
Window
NewWindow method
Creates a document window

page 82.
Window
Next property
Accesses the next window for a document

page 82.
Window
Previous property
Accesses the previous window for a document

page 82.
For detailed information on any property, method, or event, see Object Model Reference section in the
Macros Help file for the application.
In this topic
For more information on document-related activities, see the following subtopics:

Creating documents on page 80
Opening documents on page 80
Activating documents on page 81
Setting document properties on page 82
Displaying documents on page 82
Modifying documents on page 84

79
Creating command groups for documents on page 85

Saving documents on page 85
Exporting files from documents on page 86
Publishing documents to PDF on page 88
Printing documents on page 89
Closing documents on page 91
Files of all supported formats can be imported. Imported files are placed on document layers, so
information on importing files is provided in the section on working with layers (see Importing files into
layers on page 100) rather than in this section on working with documents.
Creating documents
The Application object has two methods for creating documents: CreateDocument and
CreateDocumentFromTemplate.
The Application.CreateDocument method creates an empty document based on the default page size,
orientation, and styles:
Application.CreateDocument() As Document
The Application.CreateDocumentFromTemplate method creates an untitled document from a specified

template (CDT) file:
Application.CreateDocumentFromTemplate(Template As String, _
[IncludeGraphics As Boolean = True])As Document
Both of these functions return a reference to the new document, so they are typically used as follows:
Dim newDoc as Document
Set newDoc = CreateDocument
The new document becomes active immediately and can be referenced by using the
Application.ActiveDocument property. For more information on this property, see Activating documents on
page 81.
If you want, you can use event handlers to respond to events that are triggered by creating a document:
AddinHook.New
Application.DocumentNew
GlobalMacroStorage.DocumentNew
Opening documents
To open a document, you can use the Application.OpenDocument method.
Dim doc As Document
Set doc = OpenDocument("C:\graphic1.cdr")

80
If you want, you can use event handlers to respond to events that are triggered by opening a document:
Application.DocumentOpen
Document.Open
GlobalMacroStorage.DocumentOpen
Activating documents
Each open document is a member of the Application.Documents collection. The documents in that collection
appear in the order in which they were created or opened.
To reflect the actual stacking order of the documents, you must use the Application.Windows
collection.
The Application.ActiveDocument property provides direct access to the active document that is, the
document that is in front of all the other documents in the application window. ActiveDocument is an object of
type Document and, therefore, has the same members properties, methods, and objects as the
Document class.
If no documents are open, ActiveDocument returns nothing. You can check for open documents by using the
following VBA code:
If Documents.Count = 0 Then
MsgBox "There aren't any open documents.", vbOK, "No Docs"
Exit Sub
End If
The Document.Activate method activates a document so that it can be referenced by ActiveDocument. The
following VBA code activates the third open document (if three or more documents are open):
Documents(3).Activate
Using the Document.Activate method on the Application.ActiveDocument property has no effect.

If you want, you can specify which open document to activate by referencing the one of the following properties:
Document.FilePath checks only the file path (for example, C:\My Documents)
Document.FileName checks only the filename (for example, Graphic1.cdr)
Document.FullFileName checks both the file path and the filename (for example, C:\My
Documents\Graphic1.cdr)
You can check the filename of each open document by using the following VBA code:
Public Function findDocument(filename As String) As Document
Dim doc As Document
For Each doc In Documents
If doc.FileName = filename Then Exit For

81
Set doc = Nothing

Next doc
Set findDocument = doc
End Function
You can then activate the returned document by using the Document.Activate method.
Setting document properties

You can specify the reference point, unit of measurement, and drawing scale for a document by using the
corresponding properties of the Document class.
The Document.ReferencePoint property specifies the reference point for a document. This point is referenced
when positioning the objects in that document.
The Document.Unit property specifies the unit of measurement for a document. This unit is used to position
and size the objects in that document.
The Document.WorldScale property specifies the drawing scale for a document. The drawing scale lets you
make the distances in a drawing proportionate to real-world distances; for example, you can specify that 1 inch
in the drawing corresponds to 1 meter in the physical world.
These properties affect all elements in your document, such as the objects that you draw. For optimal
results, choose the settings that best fit your macro solution.
Displaying documents
You can simultaneously display multiple windows for a single document. For example, a large document can be
displayed with one window zoomed in to the upper-right corner of the document and another zoomed in to the
lower-right corner. Although the individual windows can be zoomed and panned independently, turning the
page in one window affects all windows.
By using the View Manager, you can create views that have individual display settings. Choosing a saved view
displays the page according to the settings for that view.
In VBA, the Window object provides access to the windows that contain each View object for (or view
of) a given document. The Window object represents a frame, while the View object displays the
document inside that frame.
Besides letting you work with windows and views, the application lets you display documents by zooming and
panning.
Working with windows
Each Document object has a Windows collection for displaying that document. To switch between windows,
use the Window.Activate method:
ActiveDocument.Windows(2).Activate
The Document.ActiveWindow property provides direct access to the active window that is, the document
window that is in front of all other document windows.

82
The next window and previous window for the active document are referenced in the Window.Next and
Window.Previous properties:
ActiveWindow.Next.Activate
To create a new window, use the Window.NewWindow method:

ActiveWindow.NewWindow
To close a window (and the document, if it has only one open window), use the Window.Close method:
ActiveWindow.Close
If you want, you can use event handlers to respond to events that are triggered by activating a window:
Application.WindowActivate
GlobalMacroStorage.WindowActivate
You can also use event handlers to respond to events that are triggered by deactivating a window:
Application.WindowDeactivate
GlobalMacroStorage.WindowDeactivate
Working with views
The Window.ActiveView property and the Document.Views property both represent document views. Each
Window object has one ActiveView object, which represents the current view of the document; saving the
display settings for an ActiveView object creates a view. In contrast, each Document object has a collection of
View objects in its Views property; choosing a View object activates the corresponding saved view, which
contains the display settings for the corresponding ActiveView object.
The only way to access an ActiveView object is from the Window.ActiveView property.
You can create a View object and add it to a Document.Views collection. The following VBA code adds the
current ActiveView settings to the Views collection:
ActiveDocument.Views.AddActiveView "New View"
You can also create a view with specific settings by using the Document.CreateView method. The following
VBA code creates a new View object that accesses the position (3, 4) in inches, uses a zoom factor of 95%, and
displays page 6:
ActiveDocument.CreateView "New View 2", 3, 4, 95, 6
To apply a saved view to the active window, call the View.Activate method:
ActiveDocument.Views("New View").Activate

83
Zooming
To zoom an ActiveView object by a set amount, set the ActiveView.Zoom property by specifying a double
value in percent. For example, the following VBA code sets the zoom factor to 200%:
ActiveWindow.ActiveView.Zoom = 200.0
You can also zoom by using the following methods of the ActiveView class:
SetActualSize
ToFitAllObjects
ToFitArea
ToFitPage
ToFitPageHeight
ToFitPageWidth
ToFitSelection
ToFitShape
ToFitShapeRange
Panning
To pan an ActiveView object, you can move its origin by modifying the ActiveView.OriginX and
ActiveView.OriginY properties. The following VBA code pans the document 5 inches to the left and 3 inches
up:
Dim av As ActiveView
Set av = ActiveWindow.ActiveView
av.OriginX = av.OriginX - 5
av.OriginY = av.OriginY + 3
Alternatively, you can use the ActiveView.SetViewPoint method:

Dim av As ActiveView
Set av = ActiveWindow.ActiveView
av.SetViewPoint av.OriginX - 5, av.OriginY + 3
Modifying documents
You can modify a document regardless of whether it is active.
Modifying an inactive document does not activate that document. To activate a document, you must use
its Activate method (see Activating documents on page 81).

84
The following VBA code adds a layer named fooLayer to the third open document:
Dim doc As Document
Set doc = Documents(3)
doc.ActivePage.CreateLayer "fooLayer"
The following VBA code uses the findDocument() function to add a layer named fooLayer to the inactive
document named barDoc.cdr:
Dim doc As Document
Set doc = findDocument("barDoc.cdr")
If Not doc Is Nothing Then doc.ActivePage.CreateLayer "fooLayer"
Creating command groups for documents

Two very useful methods of the Document class combine to create a command group, which can reduce a
series of programmed, document-related actions to a single, undoable step. These methods
BeginCommandGroup and EndCommandGroup are demonstrated in the following VBA example:
Dim sh As Shape
ActiveDocument.BeginCommandGroup "CreateCurveEllipse"
Set sh = ActiveLayer.CreateEllipse(0, 1, 1, 0)
sh.ConvertToCurves
ActiveDocument.EndCommandGroup
The preceding code sets the Undo string in the Edit menu as Undo CreateCurveEllipse. Clicking this
command undoes not only the ConvertToCurves operation but also the CreateEllipse operation.
A command group can contain many hundreds of commands, if required. Creating command groups can make
your macros appear to be fully integrated into the application.
Saving documents
Two methods can be used for saving documents: Document.SaveAs and Document.Save.
The Document.SaveAs method saves a document by using the specified file path and filename. You can use this
method to save a previously unsaved document or to save an existing document to a different file.
The Document.SaveAs method provides an optional parameter that lets you access the
StructSaveAsOptions class to specify additional settings.
The Document.Save method saves over an existing document file that is, by using the existing file path and
filename for the document.

85
If you want, you can use event handlers to respond to events that are triggered by opening the Save dialog box:
Application.DocumentBeforeSave
Document.BeforeSave
GlobalMacroStorage.DocumentBeforeSave
You can also use event handlers to respond to events that are triggered by saving a document and closing the
Save dialog box:
Application.DocumentAfterSave
Document.AfterSave
GlobalMacroStorage.DocumentAfterSave
Finally, you can also use event handlers to respond to events that are triggered when the user responds to a
request to save a document:
Application.QueryDocumentSave
Document.QuerySave
GlobalMacroStorage.QueryDocumentSave
Exporting files from documents

Files of all supported formats can be exported.
Files are exported at the Document level because the range of exported objects can extend over multiple
layers and multiple pages. However, files are imported at the Layer level because each imported object
is assigned to a specified layer on a specified page (see Importing files into layers on page 100).
The Document class has three file-export methods Export, ExportEx, and ExportBitmap all of which
can export to the bitmap and vector formats.
The wide selection of supported file formats is due to the vast number of filters that are available to the
application. Each filter lets you work with the files from another graphics application. To learn more
about working with these filters, see Working with import filters and export filters on page 138.
If you want, you can use event handlers to respond to events that are triggered by opening the Export dialog
box:
Application.DocumentBeforeExport
Document.BeforeExport
GlobalMacroStorage.DocumentBeforeExport
You can also use event handlers to respond to events that are triggered by exporting a document and closing the
Export dialog box:
Application.DocumentAfterExport
Document.AfterExport
GlobalMacroStorage.DocumentAfterExport
request to export a document:
Application.QueryDocumentExport
Document.QueryExport
GlobalMacroStorage.QueryDocumentExport

86
Understanding the Document.Export method
To export a page, you require only the Document.Export method, a filename, and a filter type. The following
VBA code exports the current page to a TIFF bitmap file:
ActiveDocument.Export "C:\ThisPage.eps", cdrTIFF
However, the preceding code gives little control over the output of the image. More control is obtained by
including a StructExportOptions object, as in the following VBA code:
Dim expOpts As New StructExportOptions
expOpts.ImageType = cdrCMYKColorImage
expOpts.AntiAliasingType = cdrNormalAntiAliasing
expOpts.ResolutionX = 72
expOpts.ResolutionY = 72
expOpts.SizeX = 210
expOpts.SizeY = 297
ActiveDocument.Export "C:\ThisPage.eps", cdrTIFF, cdrCurrentPage, expOpts
A StructPaletteOptions object can also be included in the function call for palette-based image formats,
if you want to provide the settings for automatically generating the palette.
Understanding the Document.ExportEx method
The Document.ExportEx method is the same as the Document.Export method, except that ExportEx can
retreive the dialog-box settings for a filter and apply those settings to the export:
Dim eFilt As ExportFilter
Set eFilt = ActiveDocument.ExportEx("C:\ThisPage.eps", cdrEPS)
If eFilt.HasDialog = True Then
If eFilt.ShowDialog = True Then
eFilt.Finish
End If
Else
eFilt.Finish
End If
Understanding the Document.ExportBitmap method
The Document.ExportBitmap method is similar to the Document.ExportEx method in that it returns an

87
ExportFilter object that can be used to display the Export dialog box. However, the ExportBitmap method
simplifies the coding by taking the individual members of the StructExportOptions object as parameters:
Dim eFilt As ExportFilter
Set eFilt = ActiveDocument.ExportBitmap("C:\Selection.eps", _
cdrTIFF, cdrSelection, cdrCMYKColorImage, _
210, 297, 72, 72, cdrNormalAntiAliasing, _
False, True, False, cdrCompressionLZW)
eFilt.Finish
Publishing documents to PDF

Publishing documents to PDF is a two-step process. The first step is to specify the PDF settings (although this
step can be skipped by specifying those settings from the application or by using the default settings). The
second step is to export the file.
To specify the PDF settings, you can use the Document.PDFSettings property. This property is an object of
type PDFVBASettings and contains properties for all PDF settings that can be set in the Publish To PDF
dialog box.
The following VBA code exports pages 2, 3, and 5 to a PDF file named MyPDF.pdf:
Dim doc As Document
With doc.PDFSettings
.Author = "Corel Corporation"
.Bookmarks = True
.ColorMode = pdfRGB
.ComplexFillsAsBitmaps = False
.CompressText = True
.DownsampleGray = True
.EmbedBaseFonts = True
.EmbedFonts = True
.Hyperlinks = True
.Keywords = "Test, Example, Corel, CorelDRAW, PublishToPDF"
.Linearize = True

88
.PageRange = "2-3, 5"

.pdfVersion = pdfVersion13
.PublishRange = pdfPageRange
.TrueTypeToType1 = True
End With
doc.PublishToPDF "C:\MyPDF.pdf"
The following VBA example gives more control to the user by displaying the Publish to PDF Settings dialog
box:
Dim doc As Document
If doc.PDFSettings.ShowDialog = True Then
doc.PublishToPDF "C:\MyPDF.pdf"
End If
Profiles for PDF settings can be saved and loaded by using the PDFVBASettings.Save method and
PDFVBASettings.Load method (respectively).
Printing documents
Using VBA to print documents is straightforward: almost all settings that are available in the Print dialog box
are available to the Document.PrintSettings property. When these properties are set, printing the document is
simply a matter of calling the Document.PrintOut method.
For example, the following VBA code prints three copies of pages 1, 3, and 4 to a level-3 PostScript printer:
With ActiveDocument.PrintSettings
.Copies = 3
.PrintRange = prnPageRange
.PageRange = "1, 3-4"
.Options.PrintJobInfo = True
With .PostScript
.DownloadType1 = True
.Level = prnPSLevel3
End With

89
End With
ActiveDocument.PrintOut
Each page in the Print dialog box has a corresponding object-model class that contains all settings for that page.
The following table lists these classes.
Page in Print dialog box
Class in object model
General
PrintSettings
Layout
PrintSettings and PrintLayout
Separations
PrintSeparations and PrintTrapping
Prepress
PrintPrepress
PostScript
PrintPostScript
Misc
PrintOptions
You cannot set layout options in VBA. However, if necessary, you can open the Print dialog box by using
the PrintSettings.ShowDialog method.
You can print only the selected objects in a document by setting the PrintSettings.PrintRange property
to prnSelection.
You can use a specific printer in the Application.Printers collection by specifying it in the
PrintSettings.Printer property.
You can save a printing profile by using the PrintSettings.Save method.
You can access a saved printing profile by using the PrintSettings.Load method, but be sure to specify
the full path to the profile.
You can reset the print settings by using the PrintSettings.Reset method.
If you want, you can use event handlers to respond to events that are triggered by opening the Print dialog box:
Application.DocumentBeforePrint
Document.BeforePrint
GlobalMacroStorage.DocumentBeforePrint
You can also use event handlers to respond to events that are triggered by printing a document and closing the
Print dialog box:
Application.DocumentAfterPrint
Document.AfterPrint
GlobalMacroStorage.DocumentAfterPrint
request to print a document:
Application.QueryDocumentPrint
Document.QueryPrint
GlobalMacroStorage.QueryDocumentPrint

90
Closing documents
You can close a document by calling the Document.Close method.
The following VBA code closes the active document and activates the document behind it:
ActiveDocument.Close
If the code closes a document that is not active, the document referenced by the
Application.ActiveDocument property does not change.
You must explicitly test the Dirty property for a document and take appropriate action if that document
has been modified.
You can also close a document by using the Close method of the Document object itself (as in
doc.Close).
If you want, you can use event handlers to respond to events that are triggered by closing a document:
Application.DocumentClose
Document.Close
GlobalMacroStorage.DocumentClose
You can also use event handlers to respond to events that are triggered when the user responds to a request to
close a document:
Application.QueryDocumentClose
Document.QueryClose
GlobalMacroStorage.QueryDocumentClose
Working with pages

Each page, or Page object, is a member of the Document.Pages collection for the document in which it appears.
The pages in a Document.Pages collection appear in the order in which they appear in that document for
example, the fifth page in the active document is ActiveDocument.Pages.Item(5). If pages are added,
reordered, or deleted, the affected Pages collection is immediately updated to reflect the new page order of that
document.
CorelDRAW provide a number of properties, methods, and events for working with pages, the most useful of
which are listed in the following table.
Class
Member
Description
Application
ActivePage property
Provides direct access to the active page of the active document

For more information, see Activating pages on page 94.
Application
PageSizes property
Contains the collection of defined page sizes for the application

For more information, see Using defined page sizes on page 96.
Document
ActivePage property
Provides direct access to the active page of a document


91
Class
Member
Description
Document
AddPages method
or
AddPagesEx method
Adds blank pages to the end of a document
InsertPages method
or
InsertPagesEx method
Inserts pages at the specified location in a document
MasterPage property
Specifies the default page size
Document
Document
For more information, see Creating pages on page 93.
For more information, see Specifying the default page size on

page 95.
Document
PageActivate event
Is triggered when a page is activated

Document
PageChange event
Is triggered when a page is deactivated

Document
PageCreate event
Is triggered when a page is created

Document
PageDelete event
Is triggered when a page is deleted

For more information, see Deleting pages on page 97.
Document
Pages property
Contains the collection of pages for a document

Page
Activate method
Activates a page
Page
Delete method
Deletes a page
For more information, see Deleting pages on page 97.
Page
MoveTo method
Moves a page to the specified location in a document

For more information, see Reordering pages on page 95.
Page
SetSize method
Sets the size of a page

For more information, see Specifying the size and orientation of
pages on page 95.
PageSize
BuiltIn property
Returns True if a page size is built-in (rather than user-defined)

PageSize
Delete method
Deletes a user-defined page size


92
Class
Member
Description
PageSize
Height property
Specifies the height of a defined page size

PageSize
Name property
Specifies the name of a defined page size

PageSize
Width property
Specifies the width of a defined page size

In this topic
For more information on page-related activities, see the following subtopics:

Creating pages on page 93
Activating pages on page 94
Reordering pages on page 95
Sizing pages on page 95
Modifying pages on page 96
Deleting pages on page 97
Creating pages
The methods for creating pages belong to the Document class.
Both the Document.AddPages method and the Document.AddPagesEx method add the specified number of
pages to the end of a document. The difference between these methods is that AddPages uses the default page
size, while AddPagesEx uses a specified size.
Similarly, both the Document.InsertPages method and the Document.InsertPagesEx method insert the
specified number of pages at the specified location in a document. The difference between these methods is that
InsertPages uses the default page size, while InsertPagesEx uses a specified size.
As an example, the following VBA code uses the AddPages method to add three default-sized pages to the end
of the document:
Public Function AddSomeSimplePages() as Page
Set AddSomeSimplePages = ActiveDocument.AddPages(3)
End Function
The following VBA example uses the AddPagesEx method to add to the end of the document three pages that
are 8.5 inches wide by 11 inches high:
Public Function AddSomeSpecifiedPages() as Page

93
Dim doc as Document

doc.Unit = cdrInch
Set AddSomeSpecifiedPages = doc.AddPagesEx(3, 8.5, 11)
End Function
The preceding examples return the first page that was added; all other added pages follow this page. You can
therefore reference any of the added pages by incrementing the Index property of the returned page:
Dim firstNewPage As Page, secondNewPage As Page
Set firstNewPage = AddSomeSimplePages
Set secondNewPage = ActiveDocument.Pages(firstNewPage.Index + 1)
If you want, you can use event handlers to respond to events that are triggered by creating a page:
Document.PageCreate
Activating pages
Each page is a member of the Document.Pages collection for the document in which it appears. The pages in a
Document.Pages collection appear in the order in which they appear in that document for example, the fifth
page in the active document is ActiveDocument.Pages.Item(5). If pages are added, reordered, or deleted,
the affected Pages collection is immediately updated to reflect the new page order of that document.
You can access the active page of the active document by using the Application.ActivePage property (or
ActiveDocument.ActivePage, or simply ActivePage). A reference to the active page in the active document,
of type Page, is returned.

Dim pg As Page
Set pg = ActivePage
You can access the active page of a document, regardless of whether that document is active, by using
ActivePage property for that document:
Public Function getDocsActivePage(doc As Document) As Page
Set getDocsActivePage = doc.ActivePage
End Function
You can switch pages by finding the desired page and then invoking its Activate method. The following VBA
code activates page 3 in a document:
ActiveDocument.Pages(3).Activate
If you want, you can use event handlers to respond to events that are triggered by activating a page:
Document.PageActivate

94
You can also use event handlers to respond to events that are triggered by deactivating a page:
Document.PageChange
Reordering pages
A page can be moved to another location in a document by using its MoveTo method. The following VBA code
moves page 2 to the position of page 4:
ActiveDocument.Pages(2).MoveTo 4
Activating a page in an inactive document does not activate that document. To activate a document, you
must use its Activate method (see Activating documents on page 81).
Sizing pages
You can specify the size and orientation of pages, specifying the default page size, and use defined page sizes.
Specifying the size and orientation of pages
You can size a page by using its SetSize method, which applies two size values (width and height) to the page.
The following VBA code changes the size of the active page in the active document to A4:
ActivePage.SetSize 210, 297
ActivePage.Orientation = cdrLandscape
For the SetSize method, the first number is always the page width and the second number is always the page
height. Reversing the two numbers switches the orientation of the page.
Specifying the default page size
The default page size for a document is determined by the value of the item that has an index of 0 in the
Document.Pages collection. You can specify the default page size by changing the value of this item:
Dim doc As Document
doc.Unit = cdrMillimeter
doc.Pages(0).SetSize 297, 210
Alternatively, you can use the Document.MasterPage property to specify the default page size:
Dim doc As Document
doc.Unit = cdrMillimeter

95
doc.MasterPage.SetSize 297, 210
Using defined page sizes
Page sizes can be defined by either the application or the user. All defined page sizes are stored in the
Application.PageSizes collection, and the name of each PageSize object in that collection is defined by its
Name property:
Dim pageSizeName As String
pageSizeName = Application.PageSizes(3).Name
Page sizes can be specified by name. For example, the following VBA code gets the PageSize object named
Business Card:
Dim thisSize As PageSize
Set thisSize = Application.PageSizes("Business Card")
You can get the actual dimensions of a PageSize object by using its Width and Height properties. The following
VBA code retrieves the width and height (in millimeters) of the third PageSize object:
Dim pageWidth As Double, pageHeight As Double
Application.Unit = cdrMillimeter
pageWidth = Application.PageSizes(3).Width
pageHeight = Application.PageSizes(3).Height
Although each PageSize object provides a Delete method, this method can be used only on user-defined page
sizes. You can determine whether a PageSize object is user-defined by testing its BuiltIn Boolean property:
Public Sub deletePageSize(thisSize As PageSize)
If Not thisSize.BuiltIn Then thisSize.Delete
End Sub
You can specify a particular unit of measurement for a page size by setting the units for the document
before getting its width and height.
Modifying pages
You can modify a page regardless of whether it is active.
Activating a page in an inactive document does not activate that document. To activate a document, you
must use its Activate method (see Activating documents on page 81).
By explicitly referencing the page that you want to modify, you can make those changes without activating the
page. The following VBA code deletes all shapes on page 3 of the active document without activating that page:
Public Sub DeleteShapesFromPage3()

96
Dim doc As Document

doc.Pages(3).Shapes.All.Delete
End Sub
Deleting pages
You can delete a page by using its Delete method, as in the following VBA example:
ActivePage.Delete
The Page.Delete method deletes all shapes on that page, deletes the page from the Pages collection for that
document, and then updates that collection to reflect the change.
If you want to delete more than one page, you must use the Delete method for each unwanted page. However,
you cannot delete all pages in a document. You can avoid trying to delete the last remaining page in a document
by using the following VBA code:
If ActiveDocument.Pages.Count > 1 Then ActivePage.Delete
If you want, you can use event handlers to respond to events that are triggered by deleting a page:
Document.PageDelete
Working with layers

Layers are invisible planes that let you organize the objects on a page. You can group related objects into layers,
and you can change the vertical order (or stacking order) of those layers to change the appearance of the page.
Master layers apply to all pages in a document, while local layers apply to a single page.
Each layer, or Layer object, is a member of the Page.Layers collection for the page on which it appears. The
layers in a Page.Layers collection appear in the order in which they appear on that page the first layer is the
one at the top of the stack, and the last layer is the one at the bottom. If layers are added, reordered, or deleted,
the affected Page.Layers collection is immediately updated to reflect the new layer order of that page.
CorelDRAW provide a number of properties, methods, and events for working with layers, the most useful of
Class
Member
Description
Document
ActiveLayer property
Provides direct access to the active layer for a document

For more information, see Activating layers on page 99.
Document
LayerActivate event
Is triggered when a layer is activated


97
Class
Member
Description
Document
LayerChange event
Is triggered when a layer is deactivated

Document
LayerCreate event
Is triggered when a layer is created

For more information, see Creating layers on page 99.
Document
LayerDelete event
Is triggered when a layer is deleted

For more information, see Deleting layers on page 101.
Layer
Activate method
Activates a layer
Layer
Delete method
Deletes a layer
For more information, see Deleting layers on page 101.
Layer
Editable property
Controls whether a layer is editable

For information, see Locking and hiding layers on page 99.
Layer
Layer
Layer
Import method
or
ImportEx method
Imports a file into a layer
MoveAbove method
or
MoveBelow method
Moves a layer
Name property
Specifies the name of a layer
For information, see Importing files into layers on page 100.
For information, see Reordering layers on page 100.
For information, see Renaming layers on page 100.

Layer
Visible property
Controls whether the contents of a layer are visible

For information, see Locking and hiding layers on page 99.
Page
ActiveLayer property
Provides direct access to the active layer for a page

Page
CreateLayer method
Inserts a new layer at the top of the list of non-master layers

For more information, see Creating layers on page 99.
Page
Layers property
Contains the collection of layers for a page

In this topic
For more information on layer-related activities, see the following subtopics:

98
Creating layers on page 99

Activating layers on page 99
Locking and hiding layers on page 99
Reordering layers on page 100
Renaming layers on page 100
Importing files into layers on page 100
Deleting layers on page 101
Creating layers
You can create a layer by using the Page.CreateLayer method. Creating a layer inserts a new layer at the top of
the list of non-master layers.
The following VBA code creates a new layer called My New Layer:
ActivePage.CreateLayer "My New Layer"
If you want, you can use event handlers to respond to events that are triggered by activating a layer:
Document.LayerCreate
Activating layers
Each layer is a member of the Page.Layers collection for the page on which it appears. The layers in a
Page.Layers collection appear in the order in which they appear on that page the first layer is the one at the
top of the stack, and the last layer is the one at the bottom. If layers are added, reordered, or deleted, the
affected Page.Layers collection is immediately updated to reflect the new layer order of that page.
The Document.ActiveLayer property provides direct access to the active layer for a document, while the
Page.ActiveLayer property provides direct access to the active layer for a page.
You can activate a layer by using the Layer.Activate method:
ActivePage.Layers("Layer 1").Activate
Activating a locked layer does not unlock it. Similarly, activating a hidden layer does not make it visible.
For information on unlocking and displaying layers, see Locking and hiding layers on page 99.
If you want, you can use event handlers to respond to events that are triggered by activating a layer:
Document.LayerActivate
You can also use event handlers to respond to events that are triggered by deactivating a layer:
Document.LayerChange
Locking and hiding layers

Layer objects feature the properties Editable and Visible, which control (respectively) whether the layer is
editable and whether its contents are visible. Both properties are Boolean. By setting both the properties to
True, you unlock and display the layer for editing. By setting either property to False, however, you lock the
layer such that it cannot be edited.

99
The following sample VBA code locks, but displays, the layer on the active page:
ActivePage.Layers("Layer 1").Visible = True
ActivePage.Layers("Layer 1").Editable = False
The result of any changes to these properties is immediately displayed in the Object Manager.
The preceding example affects only the active page. You can access the layer settings for a given page by
specifying a page from the Document.Pages collection, or by referencing the Document.ActivePage property.
To make the changes to all pages in a document, use the Document.MasterPage property:
ActiveDocument.MasterPage.Layers("Layer 1").Visible = True
For more information on working with pages, see Working with pages on page 91.
Reordering layers
You can reorder layers by using the following two methods of the Layer class: MoveAbove and MoveBelow.
Both methods move the specified layer above or below the layer that is referenced as a parameter.
The following VBA code moves the layer called Layer 1 to immediately below the layer Guides:
Dim pageLayers As Layers
Set pageLayers = ActivePage.Layers
pageLayers("Layer 1").MoveBelow pageLayers("Guides")
The change is immediately reflected in the Object Manager (although it may be apparent only in the Layer
Manager).
Renaming layers
You can rename a layer by editing its Name property.
The following VBA code renames Layer 1 as Layer with a New Name:
ActivePage.Layers("Layer 1").Name = "Layer with a New Name"
Importing files into layers

Files of all supported formats can be imported.
Files are imported at the Layer level because each imported object is assigned to a specified layer on a
specified page. However, files are exported at the Document level because the range of exported objects
can extend over multiple layers and multiple pages (see Exporting files from documents on page 86).
The Layer class has two file-import methods: Import and ImportEx.
application. Each filter lets you work with the files from another graphics application. To learn more
about working with these filters, see Working with import filters and export filters on page 138.

100
Understanding the Layer.Import method
The Layer.Import method provides basic functionality for importing files.

The following VBA code imports the file C:\logotype.gif into the active layer at the center of the page:
ActiveLayer.Import "C:\logotype.gif"
Importing a file selects the contents of that file and deselects any other selected objects in the document. You can
therefore reposition or resize the imported objects by getting the document selection:
ActiveSelection.SetSize 3, 2
Some file formats can be imported by using one of several filters, so it is important to understand the benefits of
each available filter. For example, when importing an Encapsulated PostScript (EPS) file, you can choose between
the EPS filter and the PDF filter. The EPS filter lets you do the following:
import an EPS file as a placeable object that can be printed but not modified
interpret the PostScript portion of the file, so that you can import the original artwork from within the file
rather than its low-resolution header
To specify which filter to use, you can include the optional parameter Filter, as in the following VBA example:
ActiveLayer.Import "C:\map.eps", cdrPSInterpreted
Understanding the Layer.ImportEx method
The Layer.ImportEx method provides much better control over the import filter through its optional use of a
StructImportOptions object. The following VBA code imports the specified file as a linked file:
Dim iFilt As ImportFilter
Dim importProps As New StructImportOptions
importProps.LinkBitmapExternally = True
Set iFilt = ActiveLayer.ImportEx("C:\world-map.epsf", cdrAutoSense, importProps)
iFilt.Finish
Deleting layers
As previously discussed, each layer is a member of the Page.Layers collection for the page on which it appears.
You can delete a layer by calling its Delete method. Deleting a layer removes that layer from the document,
taking with it all shapes on that layer on all pages in the document.
The following VBA code deletes the layer called Layer 1:
ActivePage.Layers("Layer 1").Delete

101
If you want, you can use event handlers to respond to events that are triggered by deleting a layer:
Document.LayerDelete
Working with shapes

Every document is made up of shapes, or Shape objects, which are created by using the drawing tools. Any
changes that are made to the properties of a shape such as by moving the shape, changing its size, or giving it
a new fill are immediately visible to the object model.
The shapes on a document page are stored on layers. Each shape is a member of the Layer.Shapes collection for
the layer on which it appears. The shapes in a Layer.Shapes collection appear in the order in which they appear
on that layer the first shape is the one at the top of the stack, and the last shape is the one at the bottom. If
shapes are added, reordered, or deleted, the affected Layer.Shapes collection is immediately updated to reflect
the new shape order of that layer.
In addition, each document page has a Shapes collection, which contains all Layer.Shapes collections for
that page. The first shape in a Page.Shapes collection is the one at the very top of that page, and the last
shape is the one at the very bottom.
CorelDRAW provide a number of properties, methods, and events for working with shapes, the most useful of
Class
Member
Description
AddinHook
ShapeCreated event
Is triggered when a shape is created

For more information, see Creating shapes on
page 111.
Application
CreateCurve method
Creates a line or a curve in memory

For more information, see Creating lines and curves on
page 114.
Application
SelectionChange event
Is triggered when a selection is deactivated

For more information, see Deselecting shapes on
page 125.
Application
SymbolLibraries property
Contains the collection of all external symbol libraries for

the application
For more information, see Creating symbols on
page 118.
Color
CopyAssign method
Copies a color from one shape fill or shape outline to

another
For more information, see Working with color on
page 134.

102
Class
Member
Description
Color
Type method
Specifies the color model for a shape color

For more information, see Working with color on
page 134.
Curve
CreateSubPath method
Adds a subpath to a line or a curve

page 114.
Document
ClearSelection method
Deselects all objects in a document

page 125.
Document
Selection method
Returns, as a single Shape object, all selected objects in a

document
For more information, see Accessing selections directly
on page 122.
Document
SelectionChange event

page 125.
Document
SelectionRange property
Returns, as a ShapeRange object, all selected objects in

a document
For more information, see Accessing copies of
selections on page 123.
Document
ShapeChange event
Is triggered when a shape is deselected

page 125.
Document
ShapeCreate event
Is triggered when a shape is created

For more information, see Creating shapes on
page 111.
Document
ShapeDelete event
Is triggered when a shape is deleted

For more information, see Deleting shapes on
page 138.
Document
ShapeDistort event
Is triggered when a shape is distorted

For more information, see Applying distortions on
page 137.
Document
ShapeMove event
Is triggered when a shape is positioned

For more information, see Positioning shapes on
page 129.

103
Class
Member
Description
Document
ShapeTransform event
Is triggered when a shape is transformed

For more information, see Transforming shapes on
page 125.
Document
SymbolLibrary property
Returns the internal symbol library for a document

page 118.
Fill
ApplyFountainFill method
Applies a fountain fill to a shape

For more information, see Applying fountain fills on
page 131.
Fill
ApplyHatchFill method
Applies a hatch fill to a shape

For more information, see Applying hatch fills on
page 133.
Fill
ApplyPatternFill method
Applies a pattern fill to a shape

For more information, see Applying pattern fills on
page 132.
Fill
ApplyPostScriptFill method
Applies a PostScript fill to a shape

For more information, see Applying PostScript fills on
page 133.
Fill
ApplyTextureFill method
Applies a texture fill to a shape

For more information, see Applying texture fills on
page 132.
Fill
ApplyUniformFill method
Applies a uniform fill to a shape

For more information, see Applying uniform fills on
page 131.
Fill
Fountain property
Specifies the fountain-fill properties for a shape

page 131.
Fill
Hatch property
Specifies the hatch-fill properties for a shape

For more information, see Applying hatch fills on
page 133.
Fill
Pattern property
Specifies the pattern-fill properties for a shape

For more information, see Applying pattern fills on
page 132.

104
Class
Member
Description
Fill
PostScriptFill property
Specifies the PostScript-fill properties for a shape

For more information, see Applying PostScript fills on
page 133.
Fill
Texture property
Specifies the texture-fill properties for a shape

For more information, see Applying texture fills on
page 132.
Fill
Type property
Specifies the type of fill that is applied to a shape

For more information, see Coloring shapes on
page 130.
Fill
UniformColor property
Specifies the uniform-fill properties for a shape

For more information, see Applying uniform fills on
page 131.
FountainColor
Move method
Moves a color in the fountain fill for a shape

page 131.
FountainColors
Add method
Adds a color to the fountain fill for a shape

page 131.
FountainColors
Count property
Counts the number of colors between the start color and

end color in the fountain fill for a shape
page 131.
GlobalMacroStora SelectionChange event

ge
Layer
Layer

page 125.
CreateArtisticText method
or
CreateArtisticTextWide method
Creates an artistic-text object on the specified layer
CreateCurve method
Creates, on the specified layer, a line or a curve that is

created in memory by using the
Application.CreateCurve method
For more information, see Creating text objects on

page 115.

page 114.
Layer
CreateCurveSegment method
or
CreateCurveSegment2 method
Creates a basic curve on the specified layer

page 114.

105
Class
Member
Description
Layer
CreateEllipse method,
CreateEllipse2 method,
or
CreateEllipseRect method
Creates an ellipse on the specified layer
CreateLineSegment method
Creates a basic line on the specified layer
Layer
For more information, see Creating ellipses on

page 113.

page 114.
Layer
Layer
Layer
CreateParagraphText method
or
CreateParagraphTextWide method
Creates an paragraph-text object on the specified layer
CreateRectangle method,
CreateRectangle2 method,
or
CreateRectangleRect method
Creates a rectangle on the specified layer
Shapes property
Contains the collection of shapes for a layer

page 115.
For more information, see Creating rectangles on

page 111.
For more information, see Selecting shapes on

page 121.
Outline
Color property
Specifies the color of the outline for a shape

For more information, see Applying outlines on
page 133.
Outline
Style property
Specifies the dash settings (that is, style properties) for

the outline of a shape
page 133.
Outline
Type property
Specifies whether an outline is applied to a shape

page 133.
Outline
Width property
Specifies, in document units, the width of the outline for

a shape
page 133.
Segment
AddNodeAt method
Adds a node to a line segment or a curve segment

page 114.
Shape
CreateBlend method
Applies a blend effect to a shape

For more information, see Applying blends on
page 136.

106
Class
Member
Description
Shape
CreateContour method
Applies a contour effect to a shape

For more information, see Applying contours on
page 136.
Shape
CreateCustomDistortion method
Applies a customized distortion effect to a shape

page 137.
Shape
CreateCustomEffect method
Applies a customized effect to a shape

For more information, see Applying customized effects
on page 136.
Shape
CreateDropShadow method
Applies a drop-shadow effect to a shape

For more information, see Applying drop shadows on
page 137.
Shape
Shape
CreateEnvelope method,
CreateEnvelopeFromCurve method,
or
CreateEnvelopeFromShape method
Applies an envelope effect to a shape
CreateExtrude method
Applies an extrusion effect to a shape
For more information, see Applying envelopes on

page 137.
For more information, see Applying extrusions on

page 137.
Shape
CreateLens method
Applies a lens effect to a shape

For more information, see Applying lenses on
page 137.
Shape
CreatePerspective method
Applies a perspective effect to a shape

For more information, see Applying perspective on
page 138.
Shape
CreatePushPullDistortion method
Applies a Push-and-pull distortion effect to a shape

page 137.
Shape
CreateSelection method
Creates a selection from a single shape

page 121.
Shape
CreateTwisterDistortion method
Applies a Twister distortion effect to a shape

page 137.

107
Class
Member
Description
Shape
CreateZipperDistortion method
Applies a Zipper distortion effect to a shape

page 137.
Shape
Duplicate method
Duplicates a shape
For more information, see Duplicating shapes on
page 125.
Shape
Evaluate method
Returns the result of a given expression that evaluates

the properties of the current shape
For more information, see Searching for shapes on
page 138.
Shape
GetBoundingBox method
Returns the size of a shape based on the size of its

bounding box
For more information, see Sizing shapes on page 126.
Shape
GetPosition method
Returns the horizontal and vertical position of a shape

page 129.
Shape
GetSize method
Returns the size of a shape

Shape
PlaceTextInside method
Places the selected text inside the specified shape

page 115.
Shape
PositionX property
Returns, or sets, the horizontal position of a shape

page 129.
Shape
PositionY property
Returns, or sets, the vertical position of a shape

page 129.
Shape
Shape
Rotate method
or
RotateEx method
Rotates a shape
Selected method
Specifies whether a shape is selected
For more information, see Rotating shapes on

page 129.

page 121.

108
Class
Member
Description
Shape
SetBoundingBox method
Sets the size of a shape based on the size of its bounding

box
Shape
Shape
Shape
SetPosition method
or
SetPositionEx method
Sets the position of a shape
SetSize method
or
SetSizeEx method
Sets the size of a shape
SizeHeight property
Returns, or sets, the height of a shape

page 129.

Shape
SizeWidth property
Returns, or sets, the width of a shape

Shape
Shape
Shape
Skew method
or
SkewEx method
Skews a shape
Stretch method
or
StretchEx method
Stretches (or scales) a shape
Type property
Returns the type for a shape
For more information, see Skewing shapes on

page 128.
For more information, see Stretching shapes on

page 128.
For more information, see Determining shape type on

page 121.
ShapeRange
CreateSelection method
Creates a selection from a range of shapes

page 121.
ShapeRange
Duplicate method
Duplicates a range of shapes

For more information, see Duplicating shapes on
page 125.
Shapes
All method
Returns all shapes from the specified collection of shapes

page 121.
Shapes
FindShape method
Returns a single shape that has the specified properties

page 138.

109
Class
Member
Description
Shapes
FindShapes method
Returns, as a shape range, all shapes that have the

specified properties
page 138.
SubPath
SubPath
AppendCurveSegment method
or
AppendCurveSegment2 method
Adds a curve-type segment to a subpath
AppendLineSegment method
Adds a line-type segment to a subpath

page 114.

page 114.
Symbol
Definition property
Returns the definition of a symbol

page 118.
SymbolDefinition
NestedSymbols property
Contains the collection of all nested symbols for a

symbol definition
page 118.
SymbolLibrary
Symbols property
Contains the collection of all symbol definitions for a

symbol library
page 118.
Text
FitTextToPath method
Attaches the specified artistic text to the outline of a

shape
page 115.
Text
Frames property
Represents a series of text frames (or TextFrame

objects), each of which has its own text range (or
TextRange object)
page 115.
Text
Story property
Represents a text range (or TextRange object) that

includes all text in a series of text frames (or TextFrame
objects)
page 115.

110
In this topic
For more information on shape-related activities, see the following subtopics:

Creating shapes on page 111
Determining shape type on page 121
Selecting shapes on page 121
Duplicating shapes on page 125
Transforming shapes on page 125
Coloring shapes on page 130
Applying effects to shapes on page 135
Searching for shapes on page 138
Deleting shapes on page 138
Creating shapes
Every document is made up of shapes, or Shape objects, which are created by using the drawing tools. The
shapes on a document page are stored on layers, so the various shape-creation methods belong to the Layer class.
For information on creating specific types of shapes, see the following subtopics:
Creating rectangles on page 111
Creating ellipses on page 113
Creating lines and curves on page 114
Creating text objects on page 115
Creating symbols on page 118
Supported shapes not discussed in this section include polygons (or Polygon objects) and customized
shapes (or CustomShape objects).
Customized shapes that are supported include tables (or TableShape objects).
Shapes are measured in document units. You can specify the unit of measurement for a document by
using the Document.Unit property (see Setting document properties on page 82).
If you want, you can use event handlers to respond to events that are triggered by creating a shape:
AddinHook.ShapeCreated
Document.ShapeCreate
Creating rectangles
You can add rectangles (or Rectangle objects) to your documents by using one of the following methods:
Layer.CreateRectangle
Layer.CreateRectangle2
Layer.CreateRectangleRect
These methods return a reference to the new Shape object. They differ only in the parameters that they take, so
you can choose the method that best suits your macro solution.
You can also use these rectangle-creation methods to create squares.

111
The CreateRectangle method creates a rectangle by using four parameters that specify the following:
the distance between the left, top, right, and bottom sides of the rectangle (in that order)
the corresponding edges of the page frame
The following VBA example uses the CreateRectangle method to create a 2" 1" rectangle that is positioned
6" up from the bottom of the page frame and 3" in from the left side of the page frame:
Dim sh As Shape
Set sh = ActiveLayer.CreateRectangle(3, 7, 6, 5)
The CreateRectangle2 method creates a rectangle based on the coordinates of its lower-left corner, its width,
and its height.
The following VBA example uses the CreateRectangle2 method to create the same rectangle as the previous
example:
Dim sh As Shape
Set sh = ActiveLayer.CreateRectangle2(3, 6, 2, 1)
Finally, the CreateRectangleRect method creates a rectangle based on its bounding box (or Rect object).
These three rectangle-creation methods provide optional parameters for specifying corner roundness.
The CreateRectangle method specifies corner roundness by using parameters for the upper-left, upper-right,
lower-left, and lower-right corners (in that order). These parameters take integer values (which range from the
default 0 to 100) that define the radius of the four corners as a whole-number percentage of half of the length of
the shortest side.
The following VBA example re-creates the 2" 1" rectangle from the previous examples. However, this time,
the four corner radii are set to 100%, 75%, 50%, and 0% of half of the length of the shortest side (that is, to
0.5", 0.375", 0.25", and a cusp):
Dim sh As Shape
Set sh = ActiveLayer.CreateRectangle(3, 7, 6, 5, 100, 75, 50, 0)
The CreateRectangle2 method and the CreateRectangleRect method define the corner radii in the same order
as the CreateRectangle method (that is, upper-left, upper-right, lower-left, and lower-right). However,
CreateRectangle2 and CreateRectangleRect take double (floating-point) values that measure the corner radii
in document units.
When using CreateRectangle2 or CreateRectangleRect, you must limit the size of the corner radii to
less than half of the length of the shortest side of the rectangle.

112
The following VBA example uses the CreateRectangle2 method to create the same round-cornered rectangle as
the previous example:
Dim sh As Shape
ActiveDocument.ReferencePoint = cdrBottomLeft
Set sh = ActiveLayer.CreateRectangle2(3, 6, 2, 1, 0.5, 0.375, 0.25, _
0)
Creating ellipses
You can add ellipses (or Ellipse objects) to your documents by using one of the following methods:
Layer.CreateEllipse
Layer.CreateEllipse2
Layer.CreateEllipseRect
These methods return a reference to the new Shape object. They differ only in the parameters that they take, so
you can choose the method that best suits your macro solution.
You can also use the ellipse-creation methods to create circles, arcs, and pie shapes.
The CreateEllipse method creates an ellipse by using four parameters that specify the following:
the distance between the left, top, right, and bottom sides of the ellipse (in that order)
the corresponding edges of the page frame
The following VBA example creates a 50-millimeter circle:
Dim sh As Shape
The CreateEllipse2 method creates an ellipse based on its center point, its horizontal radius, and its vertical
radius. (If only one radius is given, a circle is created.)
The following VBA example uses the CreateEllipse2 method to create an ellipse:
Dim sh As Shape
Set sh = ActiveLayer.CreateEllipse2(100, 125, 50, 25)

113
The following VBA example uses the CreateEllipse2 method to create the same 50-millimeter circle as the
CreateEllipse example:
Dim sh As Shape
Set sh = ActiveLayer.CreateEllipse2(100, 125, 25)
Finally, the CreateEllipseRect method creates an ellipse based on its bounding box (or Rect object).
These three ellipse-creation methods provide three optional parameters for creating an arc or a pie shape. The
StartAngle and EndAngle parameters which are double values that are measured with zero being
horizontally right on the page and with positive values being degrees from zero and moving counterclockwise
are used to define the start angle and end angle of the shape (respectively). In addition, the Pie parameter
which is a Boolean value defines whether the shape is an arc (False) or a pie shape (True).
The following VBA code uses the CreateEllipse method to create a C shape:
Dim sh As Shape
Set sh = ActiveLayer.CreateEllipse(75, 150, 125, 100, 60, 290, False)
Creating lines and curves
You can add lines and curves (or Curve objects) to your documents. To create a line or a curve, you must first
create a Curve object in memory by using the Application.CreateCurve method.
Each Curve object has at least one subpath (or SubPath object). You can add a subpath to a line or a curve by
using the Curve.CreateSubPath method.
Each SubPath object has at least one segment (or Segment object), which can be line-type or curve-type. You
can add a line-type segment to the end of a subpath by using the SubPath.AppendLineSegment method; you
can add a curve-type segment by using the SubPath.AppendCurveSegment method or the
SubPath.AppendCurveSegment2 method.
The SubPath.AppendLineSegment method requires one set of Cartesian coordinates, which defines the
end of the new segment.
The SubPath.AppendCurveSegment method requires one set of Cartesian coordinates, which defines
the end of the new segment. Optionally, you can specify two sets of polar coordinates if you want to define
the lengths and angles of the starting and ending control handles for the segment.
The SubPath.AppendCurveSegment2 method requires three sets of Cartesian coordinates: one to
define the end of the new segment, and two to define the positions of the starting and ending control
handles for the segment.
You can add a segment to the beginning of a subpath by setting the AppendAtBeginning parameter
for the segment-creation method to True.
Finally, each Segment object has at least one node (or Node object). You can add a node to a segment by using
the Segment.AddNodeAt method.

114
You can close a Curve object by setting its Closed property to True.
After creating a curve in memory, you can apply it to a layer by using the Layer.CreateCurve method. A
reference to the new Shape object is returned.
The following VBA code creates a D-shaped curve that is closed:
Dim sh As Shape, spath As SubPath, crv As Curve
ActiveDocument.Unit = cdrCentimeter
Set crv = Application.CreateCurve(ActiveDocument)
'Create Curve object
Set spath = crv.CreateSubPath(6, 6) ' Create a SubPath
spath.AppendLineSegment 6, 3 ' Add the short vertical segment
spath.AppendCurveSegment 3, 0, 2, 270, 2, 0 ' Lower curve
spath.AppendLineSegment 0, 0 ' Bottom straight edge
spath.AppendLineSegment 0, 9 ' Left straight edge
spath.AppendLineSegment 3, 9 ' Top straight edge
spath.AppendCurveSegment 6, 6, 2, 0, 2, 90 ' Upper curve
spath.Closed = True ' Close the curve
Set sh = ActiveLayer.CreateCurve(crv) ' Create curve shape
The Layer class provides three additional methods that act as shortcuts for creating a basic line or basic curve
that has a single segment on a single subpath:
Layer.CreateLineSegment creates a basic line based on the given starting point and ending point
Layer.CreateCurveSegment creates a basic curve based on the given starting point and ending point and,
optionally, on the lengths and angles of the starting and ending control handles for the curve
Layer.CreateCurveSegment2 creates a basic curve based on the given starting point and ending point and
on the given positions of the starting and ending control handles for the curve
These three methods return a reference to the new Shape object.
Creating text objects
You can add text (or Text objects) to your documents. Two types of text are supported: artistic text and
paragraph text. An artistic-text object is a short line of text to which you can apply graphical effects. In contrast,
a paragraph-text object is a large block of text stored in a rectangular container called a frame to which
you can apply more complex formatting.

115
To create an artistic-text object, you can use one of the following methods:
Layer.CreateArtisticText creates basic artistic text
Layer.CreateArtisticTextWide creates artistic text that is in Unicode format
Both of these methods require you to specify the position and content of the artistic-text object.
Optionally, both of these methods let you set such text attributes as font style, font size, formatting, and
alignment. In addition, both of these methods return a reference to the new Shape object.
The following VBA code uses the CreateArtisticText method to create a basic artistic-text object that places the
words Hello World at the specified position:
Dim sh As Shape
Set sh = ActiveLayer.CreateArtisticText(1, 4, "Hello World")
You can fit artistic text to a path by using the Text.FitTextToPath method, which simply attaches the text to
the outline of a shape such that the text flows along the path of that shape.
The following VBA code creates a new artistic-text object and attaches it to the selected shape:
Dim sh As Shape, sPath As Shape
Set sPath = ActiveShape
Set sh = ActiveLayer.CreateArtisticText(1, 4, "Hello World")
sh.Text.FitToPath sPath
To create a paragraph-text object, you can use one of the following methods:
Layer.CreateParagraphText creates basic paragraph text
Layer.CreateParagraphTextWide creates paragraph text that is in Unicode format
Both of these methods require you to specify the size of the paragraph-text frame by setting its position
from the left, top, right, and bottom sides of the page frame (in that order). Optionally, both of these
methods let you specify the desired text and set such text attributes as font style, font size, formatting,
and alignment. In addition, both of these methods return a reference to the new Shape object.
The following VBA code uses the CreateParagraphText method to create a basic paragraph-text object that
centers the words Hi There in a frame of the specified size:
Dim sh As Shape
Set sh = ActiveLayer.CreateParagraphText(1, 4, 5, 2, "Hi There", _
Alignment := cdrCenterAlignment)

116
You can format existing paragraph text by using text ranges (or TextRange objects). Text ranges are handled in
two ways, both of which involve frames (or TextFrame objects):
frames method The Text.Frames property represents a series of text frames, each of which has its own
text range.
story method The Text.Story property represents a text range that includes all text in a series of text
frames.
A text range can be treated as a single block of text, such that any changes to text properties (such as font style
and font size) are applied to all text in that text range. Alternatively, a text range can be broken down into the
following smaller text ranges:
columns (or TextColumns objects)
paragraphs (or TextParagraphs objects)
lines (or TextLines objects)
words (or TextWords objects)
characters (or TextCharacters objects)
The object model supports all paragraph-formatting options and character-formatting options that are
offered by the application.
The following VBA code formats the specified text range by using the Text.Story property. The first paragraph
of the story is changed to a heading style and the second and third paragraphs into a body-text style:
Dim txt As TextRange
' Format the first paragraph
Set txt = ActiveShape.Text.Story.Paragraphs(1)
txt.ChangeCase cdrTextUpperCase
txt.Font = "Verdana"
txt.Size = 18
txt.Bold = True
' Format the second and third paragraphs
Set txt = ActiveShape.Text.Story.Paragraphs(2, 2)
txt.Font = "Times New Roman"
txt.Size = 12
txt.Style = cdrNormalFontStyle
You can place selected text inside closed shapes by using the Shape.PlaceTextInside method.

117
The following VBA code creates a 5" 2" ellipse and places the selected text inside it:
Dim txt As Shape, sh As Shape
Set txt = ActiveShape
sh.PlaceTextInside txt
Creating symbols
A symbol (or Symbol object) is a reusable graphic element that is defined in a symbol library. Using symbols in
your documents provides the following benefits:
lower file-size Each symbol is defined only once, regardless of how many actual instances of that symbol
appear in the document.
increased productivity Any changes made to a symbol definition are automatically propagated to all
instances of that symbol in the document.
improved workflow Symbol libraries are a convenient way to store and reuse common graphic elements.
Symbol libraries come in two varieties: external and internal.
External symbol libraries use the filename extension CSL and contain symbol definitions that must be manually
added to the workspace at the application level. You cannot modify a symbol that is defined in an external library
unless you open the associated external library (CSL) file; simply importing the file as a library does not let you
modify its contents.
External symbol libraries must be published to a location that all users can access. A common mapped
drive is a good solution, but a corporate intranet is a better one. However, if the security of the symbols
is not important, the best solution is a corporate Internet site.
Internal symbol libraries exist at the document level. Defining a new symbol in a document or adding an
instance of an external-library symbol to a document automatically adds that symbol to the internal library
for that document. For this reason, each document has its own unique internal symbol library.
Inserting an instance of a symbol from an external symbol library creates a link to the definition for that
symbol in that external symbol library. If, at any point, the document cannot access the external symbol
library, the symbol definition in the internal symbol library for that document is used instead.
The Application.SymbolLibraries property contains the collection of all external symbol libraries (or
SymbolLibrary objects) that are available to the application; the Document.SymbolLibrary property returns
just the internal symbol library for that document. The SymbolLibrary.Symbols property contains the
collection of all symbol definitions (or SymbolDefinition objects) in that symbol library. A SymbolDefinition
object is also returned by the Symbol.Defintion property; therefore, you can modify the defintion of a symbol
by using the various properties and methods of the SymbolDefinition class.
To remove a symbol definition from the internal symbol library for a document, you must delete all
instances of the symbol from the document and then run the SymbolLibrary.PurgeUnusedSymbols
method. Simply removing all instances of a symbol from a document does not automatically remove its
symbol definition from the internal symbol library for that document.

118
The following VBA code demonstrates the basics of using symbols:

Sub AddRemoveSymbols()
Dim objSymLibSwitchA As SymbolLibrary
Dim shpSymBreaker2 As Shape, shpSymBreaker2A As Shape
'Add the switchesA external symbol library to the global
'workspace.
Set objSymLibSwitchA = SymbolLibraries.Add _
("C:\libs\switches\switchesA.csl")
'Add the breaker2 symbol to the active layer.
'NOTE: This automatically adds the symbol definition to the
'internal symbol library for the document.
Set shpSymBreaker2 = ActiveLayer.CreateSymbol(15, 20, _
"breaker2", SymbolLibraries("switchesA"))
'Add another instance of the breaker2 symbol, this time from the
'internal symbol library. NOTE: We did not specify a library, so
'the library for the local document is used by default.
Set shpSymBreaker2A = ActiveLayer.CreateSymbol(30, 20, _
"breaker2")
'Remove the switchesA library from the global workspace.
SymbolLibraries("switchesA").Delete
'Delete the two breaker2 symbols.
shpSymBreaker2.Delete
shpSymBreaker2A.Delete
'At this point, the internal symbol library for the document
'still has the definition of breaker2 stored. To remove this
'definition, we must purge the unused symbols from the library.
'The definition is unused because there are no instances that

119
'reference it.
ActiveDocument.SymbolLibrary.PurgeUnusedSymbols
End Sub
A symbol can contain (or nest) other symbols. A top-level symbol can contain symbols, and each of those
symbols can contain a symbol, and so forth. In the object model, the SymbolDefinition.NestedSymbols
property returns (as a SymbolDefinitions object) the collection of nested symbols for a symbol definition. While
there is no restriction on how many nesting levels can be created, the symbol cannot be rendered without access
to its symbol definition (whether external or internal). In addition, even if the first and second nesting layers of a
symbol are rendered correctly, a symbol on the third nesting layer may not be rendered correctly without access
to its required symbol definition.
Symbols and nested symbols
The following VBA code demonstrates the basics of using nested symbols:
Sub MakeNestedSymbol()
Dim shp1 As Shape, shp2 As Shape, shp3 As Shape, shpSym As Shape
Dim shpRng As New ShapeRange
'Create a pair of rectangles and a circle.
Set shp1 = ActiveLayer.CreateRectangle2(0, 0, 10, 20)
Set shp2 = ActiveLayer.CreateRectangle2(50, 50, 20 ,10)
Set shp3 = ActiveLayer.CreateEllipse(10, 10, 20)
'Make a symbol out of the circle. NOTE: This circle is
'automatically added to the internal symbol library for the

120
'document.
Set shpSym = shp3.ConvertToSymbol("circle")
'Add the rectangles and the circle symbol to a shape range.
shpRng.Add shp1
shpRng.Add shp2
shpRng.Add shpSym
'Convert the shape range into a symbol. NOTE: This symbol is
'added to the internal symbol library for the document. It is
'also is a nested symbol because it contains the symbol circle.
shpRng.ConvertToSymbol "shapes"
End Sub
Determining shape type

Each Shape object has a read-only Type property, which returns the shape type (for example, rectangle, ellipse,
curve, text, or group). The properties and methods that are available to a shape vary with shape type; therefore,
its a good idea to determine the shape type before applying any properties or methods to that shape.
The following sample VBA code determines whether a shape is text. If the shape is text, the code determines
whether it is artistic text or paragraph text. If the shape is artistic text, it is rotated by 10 degrees.
Dim sh As Shape
Set sh = ActiveShape
If sh.Type = cdrTextShape Then
If sh.Text.IsArtisticText = True Then
sh.Rotate 10
End If
End If
Selecting shapes
Each shape is a member of the Layer.Shapes collection for the layer on which it appears. The shapes in a
Layer.Shapes collection appear in the order in which they appear on that layer the first shape is the one at the
top of the stack, and the last shape is the one at the bottom. If shapes are added, reordered, or deleted, the
affected Layer.Shapes collection is immediately updated to reflect the new shape order of that layer.

121
In addition, each document page has a Shapes collection, which contains all Layer.Shapes collections for
that page. The first shape in a Page.Shapes collection is the one at the very top of that page, and the last
shape is the one at the very bottom.
If you want to access individual shapes, you can select them. When you select shapes, you create a selection
that contains only those shapes.
The Shape.Selected property takes a Boolean value that indicates whether a shape is selected: True if the shape
is selected, False otherwise. You can select a shape by changing the value of its Selected property to True; this
technique adds the shape to the current selection that is, rather than creating a new selection that contains
only that shape.
If you want to create a new selection from a shape that is, by selecting a specified shape and deselecting any
other selected shapes you can use the Shape.CreateSelection method, as in the following VBA example:
Dim sh As Shape
Set sh = ActivePage.Shapes(1)
If sh.Selected = False Then sh.CreateSelection
You can select multiple shapes by using the ShapeRange.CreateSelection method. The following VBA code
uses this method in combination with the Shapes.All method to select all shapes on the active page
(except those on locked or hidden layers):
ActivePage.Shapes.All.CreateSelection
You can access a selection in one of two ways:

Use the Document.Selection method to return a special Shape object that contains the actual selection. This
Shape object is automatically refreshed when the selection is updated.
Use the Document.SelectionRange property to return a ShapeRange object that contains a copy of the
selection. This ShapeRange object represents a snapshot of the selection (at the time when the
ShapeRange object was created), so it is not automatically refreshed when the selection is updated.
To summarize, you can access a selection directly, or you can access a copy of that selection; alternatively, you can
access a subset of the shapes in a selection. You can also reorder the shapes in a selection. When you no longer
require a selection, you can deselect one or all of its shapes.
For more information on selecting shapes, see the following subtopics:
Accessing selections directly on page 122
Accessing copies of selections on page 123
Accessing the shapes in a selection on page 124
Reordering the shapes in a selection on page 125
Deselecting shapes on page 125
Accessing selections directly
As previously discussed, you can use the Document.Selection method to access the contents of a selection
directly. A Shape object is returned, and this Shape object is updated to reflect any changes made to the
selection.

122
The following VBA code returns the selection for the active document:
Dim sel As Shape
Set sel = ActiveDocument.Selection
The shortcut for ActiveDocument.Selection is ActiveSelection, which returns a Shape object of subtype
cdrSelectionShape. The Shape subtype has a member collection called Shapes, which represents a collection of
all the selected shapes in the document. The shapes in the ActiveSelection.Shapes collection can be accessed
as in the following VBA example:
Dim sh As Shape, shs As Shapes
Set shs = ActiveSelection.Shapes
For Each sh In shs
sh.Rotate 15 'Rotate each shape by 15 degrees counterclockwise
Next sh
After you use the ActiveSelection command to select shapes, you cannot subsequently use the
command to access those shapes. Instead, you must create a copy of the selection by using one of the
following methods:
Recreate the selection as an array of Shape objects.
Recreate the selection as a Shapes collection.
Create a snapshot of the selection as a ShapeRange object (see Accessing copies of selections on
page 123).
Accessing copies of selections
As previously discussed, you can use the Document.SelectionRange property to make a copy of the shapes in a
selection. However, the returned ShapeRange object is not refreshed when the selection is updated because it
represents a snapshot of the selection at the moment when that ShapeRange object was created.
The following VBA code returns a copy of the selection for the active document:
Dim selRange As ShapeRange
Set selRange = ActiveDocument.SelectionRange
The shortcut for the ActiveDocument.SelectionRange command is ActiveSelectionRange, which returns

a ShapeRange object. This object contains a collection of references to the shapes that were selected at the
moment when the property was invoked. The shapes in the ActiveSelectionRange collection can be accessed
as in the following VBA example:
Dim sh As Shape, shRange As ShapeRange
Set shRange = ActiveSelectionRange
For Each sh In shRange

123
sh.Skew 15 ' Skew each shape thru 15 counterclockwise

Next sh
After you use the ActiveSelectionRange command to create a copy of the current document selection, you
can subsequently access the returned ShapeRange object to access any of its shapes. You can even add shapes to
or remove shapes from the returned ShapeRange object. You can then use the ShapeRange.CreateSelection
method if you want to replace the current selection with the modified ShapeRange object.
The following VBA code creates a ShapeRange object from the current document selection, removes the first
and second shapes from that shape range, and then replaces the original selection with this modified
ShapeRange object:
Dim shRange As ShapeRange
Set shRange = ActiveSelectionRange
shRange.Remove 1
shRange.Remove 2
shRange.CreateSelection
If you want to add a specified ShapeRange object to the current selection (rather than use it to replace
the current selection), you can use the ShapeRange.AddToSelection method.
Accessing the shapes in a selection
You can use a similar process for accessing the shapes in a selection as you can for accessing the shapes in a
selection range.
Here is a a VBA code sample for accessing the shapes in a selection:
Dim shs As Shapes, sh As Shape
Set shs = ActiveSelection.Shapes
For Each sh In shs
' Do something with the shape, sh
Next sh
Here is a VBA code sample for accessing the shapes in a selection range:
Dim sRange As ShapeRange, sh As Shape
Set sRange = ActiveSelectionRange
For Each sh In sRange
' Do something with the shape, sh
Next sh

124
Remember that the ActiveSelection.Shapes command provides direct access to the current
selection, while the ActiveSelectionRange command provides a copy of the current selection. Use
ActiveSelection.Shapes if you want to access the current selection; use ActiveSelectionRange if
you want to create a snapshot of the current selection that you can access later.
Reordering the shapes in a selection
The ActiveSelection.Shapes command and the ActiveSelectionRange command return shapes in the
reverse order from which they were selected: the first shape is the last one selected, and the last shape is the first
one selected. Please keep this fact in mind when reordering the shapes in a selection.
Deselecting shapes
You can deselect any shape by changing the value of its Shape.Selected property to False.
You can deselect all shapes by using the Document.ClearSelection method. The following VBA code uses the
ClearSelection method to deselect all shapes in the active document:
ActiveDocument.ClearSelection
If you want, you can use event handlers to respond to events that are triggered by deseleting a shape:
Document.ShapeChange
You can also use event handlers to respond to events that are triggered by deactivating a selection:
Application.SelectionChange
Document.SelectionChange
GlobalMacroStorage.SelectionChange
Duplicating shapes
You can use the Shape.Duplicate method to duplicate a shape, and you can use the ShapeRange.Duplicate
method to duplicate a range of shapes.
ActiveSelection.Duplicate
The Duplicate method provides two optional parameters, OffsetX and OffsetY, which offset the duplicate from
the original (horizontally and vertically, respectively). The following VBA code positions the duplicate two inches
to the right and one inch above the original:
ActiveSelection.Duplicate 2, 1
Transforming shapes
You can transform shapes in various ways, as explained in the following topics:
Sizing shapes on page 126
Stretching shapes on page 128
Skewing shapes on page 128
Rotating shapes on page 129

125
Positioning shapes on page 129

If you want, you can use event handlers to respond to events that are triggered by transforming a shape:
Document.ShapeTransform
Sizing shapes
You can return the width and height of a shape (in document units) by using the Shape.SizeWidth and
Shape.SizeHeight properties, as in the following VBA example:
Dim width As Double, height As Double
width = ActiveShape.SizeWidth
height = ActiveShape.SizeHeight
You can also use the Shape.SizeWidth and Shape.SizeHeight properties to resize an existing shape by
specifying new values for those properties. The following VBA example uses these properties to set the size of the
active shape to a width of 50 millimeters and a height of 70 millimeters:
ActiveShape.SizeWidth = 50
ActiveShape.SizeHeight = 70
You can return both the width and the height of a shape (in document units) by using the Shape.GetSize
method, as in the following VBA example:
ActiveShape.GetSize width, height
You can resize a shape by using the Shape.SetSize method to specify a new width and new height for it, as in the
ActiveShape.SetSize 50, 70
You can also resize a shape by using the Shape.SetSizeEx method. Besides the new width and new height for the
shape, this method takes a reference point for the resize (instead of using the center point of the shape). The
following VBA code uses the SetSizeEx method to resize the current selection to 10 inches wide by 8 inches high
about the reference point (6, 5) in the document:
ActiveSelection.SetSizeEx 6, 5, 10, 8

126
If you want to take the outline of a shape into account when returning the size of that shape, you must use the
Shape.GetBoundingBox method. The bounding box for a shape surrounds both the shape and its outline;
however, the actual dimensions of a shape specify its width and height irrespective of the size of its outline. The
following VBA example uses the GetBoundingBox method to return the size of the active shape:
Dim posX As Double, posY As Double
ActiveShape.GetBoundingBox posX, posY, width, height, True
The Shape.GetBoundingBox method takes parameters that specify the position of the lower-left corner of the
shape, the width of the shape, and the height of the shape. The final parameter is a Boolean value that indicates
whether to include (True) or exclude (False) the outline of the shape. The Shape.SetBoundingBox method lets
you set the size of a shape by specifying the size of its bounding box; however, this method lacks the parameter
for specifying whether to include the outline in the new size. If you want to calculate the size and position of the
bounding box of a shape without including its outline, you can use the GetBoundingBox method twice (once
including the outline and once excluding it), as in the following VBA example:
Public Sub SetBoundingBoxEx(X As Double, Y As Double, _
Width As Double, Height As Double)
Dim sh As Shape
Dim nowX As Double, nowY As Double
Dim nowWidth As Double, nowHeight As Double
Dim nowXol As Double, nowYol As Double
Dim nowWidthol As Double, nowHeightol As Double
Dim newX As Double, newY As Double
Dim newWidth As Double, newHeight As Double
Dim ratioWidth As Double, ratioHeight As Double
Set sh = ActiveSelection
sh.GetBoundingBox nowX, nowY, nowWidth, nowHeight, False
sh.GetBoundingBox nowXol, nowYol, nowWidthol, nowHeightol, True
ratioWidth = Width / nowWidthol
ratioHeight = Height / nowHeightol

127
newWidth = nowWidth * ratioWidth

newHeight = nowHeight * ratioHeight
newX = X + (nowX - nowXol)
newY = Y + (nowY - nowYol)
sh.SetBoundingBox newX, newY, newWidth, newHeight, False, _
cdrBottomLeft
End Sub
Stretching shapes
You can stretch a shape (or scale it by stretching is proportionately) by using the Shape.Stretch method or the
Shape.StretchEx method. Both methods take a decimal value for the stretch, where 1 is 100% (or no change);
you cannot use zero, so you must use a very small value instead.
The following VBA code uses the Shape.Stretch method to stretch the selection to half its current height and
twice its width, about the midpoint of the bottom edge of its bounding box:
ActiveDocument.ReferencePoint = cdrBottomMiddle
ActiveSelection.Stretch 2, 0.5
If you want to specify the reference point about which to perform a stretch, you can use the Shape.StretchEx
method. The following VBA code performs the same stretch as the previous code, but it performs that stretch
about the point (4, 5) on the page (in inches):
ActiveSelection.StretchEx 4, 5, 2, 0.5
The Shape.Stretch and Shape.StretchEx methods provide an optional Boolean parameter that
determines how to stretch paragraph text. A value of True stretches the characters, while False stretches
the bounding box and re-flows the text within it.
Skewing shapes
You can skew a shape by using the Shape.Skew method or the Shape.SkewEx method. These methods let you
specify the horizontal-skew angle (in degrees, where positive values move the top edge to the left and the bottom
edge to the right) and the vertical-skew angle (in degrees, where positive values move the right edge upwards
and the left edge downwards).
Skews of angles close to or greater than 90 are not allowed.
The horizontal skew is applied before the vertical skew.
The difference between the Shape.Skew and Shape.SkewEx methods is the point about which the skew is
performed: Skew uses the center of rotation for the shape, while SkewEx uses the specified reference point.

128
You can determine the center of rotation for a shape by returning the values of its
Shape.RotationCenterX and Shape.RotationCenterY properties. Changing these values moves the
center of rotation for that shape.
The following VBA code uses the Shape.Skew method to skew the selection (about its center of rotation) by 30
horizontally and by 15 vertically:
ActiveSelection.Skew 30, 15
Rotating shapes
You can rotate a shape by using the Shape.Rotate method or the Shape.RotateEx method. These methods
rotate the shape by the given angle (in degrees). However, the difference between these methods is the point
about which they perform the rotation: Rotate uses the center of rotation for the shape, while RotateEx uses the
specified reference point.
You can determine the center of rotation for a shape by returning the values of its
Shape.RotationCenterX and Shape.RotationCenterY properties. Changing these values moves the
center of rotation for that shape.
The following VBA code uses the Shape.Rotate method to rotate the selection (about its center of rotation) by
30:
ActiveSelection.Rotate 30
The following VBA code uses the Shape.RotateEx method to rotate each selected shape by 15 clockwise about
its lower-right corner:
Dim sh As Shape
ActiveDocument.ReferencePoint = cdrBottomRight
For Each sh In ActiveSelection.Shapes
sh.RotateEx -15, sh.PositionX, sh.PositionY
Next sh
Positioning shapes
You can return the horizontal and vertical position of a shape by using the Shape.PositionX and
Shape.PositionY properties (respectively). Alternatively, you can use the Shape.GetPosition method to return
both the horizontal position and the vertical position of a shape.
You can use the Shape.GetBoundingBox method if you want to return the position of a shape,
including its outline. For more information on this method, see Sizing shapes on page 126.
The following VBA code uses the Shape.GetPosition method to return the position of the selection relative to
the current reference point of the active document, which the code explicitly sets to the lower-left corner:
Dim posX As Double, posY As Double

129
ActiveSelection.GetPosition posX, posY
You can also use the Shape.PositionX and Shape.PositionY properties to set the horizontal and vertical
position of a shape (respectively), thereby moving that shape to the specified position. Alternatively, you can use
the Shape.SetPosition method to move a shape to specified horizontal and vertical position, or you can use the
Shape.SetPositionEx method to move the shape to a specified point.
You can also use the Shape.SetSizeEx and Shape.SetBoundingBox methods to set the position of a
shape. For more information on these methods, see Sizing shapes on page 126.
The following VBA code uses the Shape.SetPosition method to set the position of the lower-right corner of each
selected shape in the active document to (3, 2) in inches:
Dim sh As Shape
ActiveDocument.ReferencePoint = cdrBottomRight
For Each sh In ActiveSelection.Shapes
sh.SetPosition 3, 2
Next sh
If you want, you can use event handlers to respond to events that are triggered by positioning a shape:
Document.ShapeMove
Coloring shapes
You can add color to a shape by applying a fill (or Fill object) to it. The fill type for a shape is recorded by the
Fill.Type property as one of the following constants for the cdrFillType enumeration:
cdrUniformFill uniform fill
cdrFountainFill fountain fill
cdrPatternFill pattern fill
cdrTextureFill texture fill
cdrPostScriptFill PostScript fill
cdrHatchFill hatch fill
cdrNoFill no fill
The following VBA code returns the type of fill that is applied to the active shape:
Dim fillType As cdrFillType
fillType = ActiveShape.Fill.Type
You cannot change the fill type for a shape by modifying its Fill.Type property. Instead, you must use
the appropriate Fill.Apply...Fill method, as described in the subsections that follow.
You can also add color to a shape by applying an outline (or Outline object) to it.
In addition, the object model provides a variety of properties and methods for working with the colors (or Color
objects) that you apply to shapes.

130
For information on applying fills and outlines and on working with colors, see the following subtopics:
Applying uniform fills on page 131
Applying fountain fills on page 131
Applying pattern fills on page 132
Applying texture fills on page 132
Applying PostScript fills on page 133
Applying hatch fills on page 133
Applying outlines on page 133
Working with color on page 134
In your macros, you can include queries that search for shapes that have specific fill properties, outline
properties, or color properties. For information, see Including queries in macros in the Macros Help file
for the application.
Applying uniform fills
Uniform fills consist of a single, solid color. A uniform fill is represented by the Fill.UniformColor property as a
Color object.
You can apply a uniform fill to a shape by using the Fill.ApplyUniformFill method. The following VBA
example applies a red uniform fill to the active shape:
ActiveShape.Fill.ApplyUniformFill CreateRGBColor(255, 0, 0)
You can change the color of a uniform fill by modifying its Fill.UniformColor property. The following VBA
example changes the uniform fill of the active shape to deep navy blue:
ActiveShape.Fill.UniformColor.RGBAssign 0, 0, 102
You can remove the uniform fill from a shape by using the Fill.ApplyNoFill method.
Applying fountain fills
Fountain fills display a progression between two colors. A fountain fill is represented by the Fill.Fountain
property as a FountainFill object, which specifies the various properties for the fountain fill: start color, end
color, angle, blend type, and so on. The colors in a fountain fill are represented by a FountainColors collection.
You can apply a fountain fill to a shape by using the Fill.ApplyFountainFill method. This method provides
optional parameters for various fountain-fill settings, such as the midpoint and offset of the blend. The following
VBA example creates a simple linear fountain fill, from red to yellow, at 30 degrees to the horizontal:
Dim startCol As New Color, endCol As New Color
startCol.RGBAssign 255, 0, 0
endCol.RGBAssign 255, 255, 0
ActiveShape.Fill.ApplyFountainFill startCol, endCol, cdrLinearFountainFill, 30

131
You can add a color to a fountain fill by using the FountainColors.Add method. Color positions are integer
values in percent, where 0% is the start-color position and 100% is the end-color position. The following VBA
example adds a green color to the fountain fill at a position about one-third (33%) of the way from the existing
red color:
Dim fFill As FountainFill
Set fFill = ActiveShape.Fill.Fountain
fFill.Colors.Add CreateRGBColor(0, 102, 0), 33
You can move a color in a fountain fill by using the FountainColor.Move method. The following VBA code
moves the green color from the previous example to a position that is 60% of the way from the red (that is, more
towards the yellow):
ActiveShape.Fill.Fountain.Colors(1).Move 60
You can use the FountainColors.Count property to determine the number of colors between the start color and
end color of a fountain fill. (For the preceding example, this value is 1.) The first color in the collection is that
start color, and its index number is 0; this color cannot be moved, but its color can be changed. The last color in
the collection is the end color, and its index number is (Count + 1); this color cannot be moved, but its color
can be changed. The following VBA code changes the end color from yellow to blue:
Dim cols As FountainColors
Set cols = ActiveShape.Fill.Fountain.Colors
cols(cols.Count + 1).Color.RGBAssign 0, 0, 102
You can remove the fountain fill from a shape by using the Fill.ApplyNoFill method.
Applying pattern fills
Pattern fills display a series of repeating vector objects or bitmap images. A pattern fill is represented by the
Fill.Pattern property as a PatternFill object, which specifies the various properties for the pattern fill:
foreground color, background color, tile offset, and so on.
The collection of available pattern fills is stored in the PatternCanvases collection.
You can apply a pattern fill to a shape by using the Fill.ApplyPatternFill method.
You can remove the pattern fill from a shape by using the Fill.ApplyNoFill method.
Applying texture fills
Texture fills are fractally generated and fill a shape with one image rather than a series of repeating images. A
texture fill is represented by the Fill.Texture property as a TextureFill object, which specifies the various
properties for the texture fill: origin, resolution, tile offset, and so on.

132
The properties for a texture fill are stored in a TextureFillProperties collection.

You can apply a texture fill to a shape by using the Fill.ApplyTextureFill method.
You can remove the texture fill from a shape by using the Fill.ApplyNoFill method.
Applying PostScript fills
PostScript fills are texture fills that are designed by using the PostScript language. A PostScript fill is represented
by the Fill.PostScript property as a PostScriptFill object, which specifies the various properties for the
PostScript fill.
You can apply a PostScript fill to a shape by using the Fill.ApplyPostScriptFill method.
You can remove the PostScript fill from a shape by using the Fill.ApplyNoFill method.
Applying hatch fills
Hatch fills are composed of vector-based lines and can be used to clearly distinguish the materials or object
relationships in a drawing. A hatch fill is represented by the Fill.Hatch property as a HatchFill object, which
specifies the various properties for the hatch fill.
The collection of available hatch-fill patterns is stored in the HatchPatterns collection, and each
document stores its own library of hatch-fill patterns in a HatchLibraries collection.
You can apply a hatch fill to a shape by using the Fill.ApplyHatchFill method.
You can remove the hatch fill from a shape by using the Fill.ApplyNoFill method.
Applying outlines
You can use the various properties and methods of the Outline class to define the outline of a shape.
The Outline.Type property uses the following constants of the cdrOutlineType enumeration to record whether
the specified shape has an outline:
cdrOutline indicates that the shape has an outline
cdrNoOutline indicates that the shape does not have an outline
If a shape has no outline, setting its Outline.Type property to cdrOutline applies the document-default
outline style.
If a shape has an outline, setting its Outline.Type property to cdrNoOutline removes that outline.
The Outline.Width property for an outline sets its width in document units. In the following VBA example, the
outline of the selected shapes is set to 1 millimeter:
ActiveSelection.Outline.Width = 1

133
If a shape does not have an outline, its Outline.Width value is 0. Changing this value applies an outline
and automatically changes the value for the Outline.Type property from cdrNoOutline to cdrOutline.
Similarly, if a shape has an outline, its Outline.Width value is greater than 0. Changing this value to 0
removes the outline and automatically changes the value for the Outline.Type property from cdrOutline
to cdrNoOutline.
The Outline.Color property for an outline defines its color, as in the following VBA example:
ActiveSelection.Outline.Color.GrayAssign 0 ' Set to black
Setting the color of an outline automatically sets the Outline.Type property of that outline to
cdrOutline and applies the default outline width.
The Outline.Style property for an outline specifies the dash settings of that outline. These dash settings are
defined by the following properties of the OutlineStyle class:
DashCount represents the number of pairs of dashes and gaps in an outline. This value ranges from 1 to 5.
DashLength represents the length of each dash in an outline. This value is calculated as a multiple of the
outline width, which is measured in document units. For example, if DashLength(1) is 5 and the outline is
0.2" wide, the length of the dash is 1"; however, if the width of the line is changed to 0.1", the length of the
dash becomes 0.5".
GapLength represents the length ofeach gap in an outline. This value is calculated as a multiple of the
outline width, which is measured in document units.
Index represents the index number of a predefined outline style in the OutlineStyles collection for the
application. The OutlineStyles collection is customizable, so the index number that is associated with each
outline style in the collection may vary from user to user; however, the expression OutlineStyles.Item(0)
always specifies a solid line.
Outline objects have many other properties, including the following:
StartArrow and EndArrow specify the arrowhead on each end of an open curve
LineCaps and LineJoin respectively, specify the type of line caps (butt, round, or square) and line
joins (bevel, miter, or round)
NibAngle and NibStretch specify the shape of the nib used to draw the outline
BehindFill and ScaleWithShape respectively, draw the outline behind the fill and scale the
outline with the shape
Outline objects also have methods, including the following:
ConvertToObject converts the outline to an object
SetProperties sets most of the available outline properties in a single call
Working with color
The Color class defines the fill colors and outline colors that you apply to shapes. This class provides a number of
properties and methods for working with color.
You can determine the color model of a color by accessing its Color.Type property, as in the following VBA
example:
Dim colType As cdrColorType
colType = ActiveShape.Outline.Color.Type

134
The Color.Type property is defined by the cdrColorType enumeration, which provides the following constants
(among many others) for supported color models:
cdrColorCMYK specifies the CMYK color model
cdrColorRGB specifies the RGB color model
cdrColorGray specifies the grayscale color model
The color components for each supported color model are defined by additional properties of the Color
class, as demostrated by the following VBA examples:
CMYK color model is defined by the Color.CMYKCyan, Color.CMYKMagenta,
Color.CMYKYellow, and Color.CMYKBlack properties
RGB color model is defined by the Color.RGBRed, Color.RGBGreen, and Color.RGBBlue
properties
grayscale color model is defined by the Color.Gray property
The range of values that is supported by a color component depends on the color model for that
component.
To create a color, you can use the automation keyword New, as in Dim col As New Color.
To assign a color model to a new color, you can use the desired ...Assign method (such as
Color.CMYKAssign, Color.RGBAssign, or Color.GrayAssign). Each of these methods provides one
parameter for each color component in its respective color model. For example,
col.RGBAssign 0, 0, 102 assigns a deep-blue RGB color to the new color that was created in the
previous tip.
To use the applications color-management settings to change the color model that is assigned to a color,
you can use the desired ConvertTo... method (such as Color.ConvertToCMYK, Color.ConvertToRGB,
or Color.ConvertToGray). For example, ActiveShape.Fill.UniformColor.ConvertToRGB
converts the fill of the active shape to the RGB color model.
You can copy the properties of one color to another color by using the Color.CopyAssign method, as in the
Dim sh As Shape
Set sh = ActiveShape
sh.Outline.Color.CopyAssign sh.Fill.UniformColor
The color none does not exist. To set a fill color or outline color to none, you must instead set the fill
type or outline type to none.
Applying effects to shapes

The object model provides a number of methods for applying effects to shapes. For information on these
methods, see the following subtopics:
Applying blends on page 136
Applying contours on page 136
Applying customized effects on page 136
Applying distortions on page 137

135
Applying drop shadows on page 137

Applying envelopes on page 137
Applying extrusions on page 137
Applying lenses on page 137
Applying perspective on page 138
Applying an effect returns an Effect object, which lets you access various properties and methods for the
created effect. For example, you can use the Effect.Separate method to separate the shapes that are
generated by an effect from the shape to which that effect is applied. In addition, you can use the
Effect.Clear method to remove an effect from a shape.
Applying blends
The Shape.CreateBlend method creates a blend between the current shape and the shape that is specified as a
parameter. This method provides optional parameters for various blend settings, such as the acceleration of the
blend and the path along which the blend is created.
The following VBA code creates a basic ten-step blend:
Dim sh As Shapes, eff As Effect
Set sh = ActiveSelection.Shapes
Set eff = sh(1).CreateBlend(sh(2), 10)
In the preceding example, the number of shapes in the blend is twelve: the start and end shapes, plus the
ten blend steps that are created.
The Shape.CreateBlend method returns an Effect object, the Effect.Blend property for which you can
use to modify the created blend.
Applying contours
The Shape.CreateContour method applies a contour to a shape. This method provides optional parameters for
various contour settings, such as the colors and acceleration of the contour.
The following VBA code creates a three-step contour at a five-millimeter spacing:
Dim eff As Effect
Set eff = ActiveShape.CreateContour(cdrContourOutside, 5, 3)
The Shape.CreateContour method returns an Effect object, the Effect.Contour property for which you
can use to modify the created contour.
Applying customized effects
The Shape.CreateCustomEffect method applies a customized effect to a shape. This method provides
parameters for various effect settings.

136
The Shape.CreateCustomEffect method returns an Effect object, the Effect.Custom property for
which you can use to modify the created effect.
Applying distortions
The following methods apply a distortion to a shape:

Shape.CreatePushPullDistortion applies a Push-and-pull distortion
Shape.CreateTwisterDistortion applies a Twister distortion
Shape.CreateZipperDistortion applies a Zipper distortion
Shape.CreateCustomDistortion applies a customized distortion
These methods provide parameters for various distortion settings.
The distortion-creation methods return an Effect object, the Effect.Distortion property for which you
can use to modify the created distortion.
If you want, you can use event handlers to respond to events that are triggered by distorting a shape:
Document.ShapeDistort
Applying drop shadows
The Shape.CreateDropShadow method applies a drop shadow to a shape. This method provides optional
parameters for various drop-shadow settings, such as the feathering and offset of the drop shadow.
The Shape.CreateDropShadow method returns an Effect object, the Effect.DropShadow property for
which you can use to modify the created drop shadow.
Applying envelopes
The following methods apply an envelope to a shape:

Shape.CreateEnvelope applies a basic envelope
Shape.CreateEnvelopeFromCurve applies an envelope by using the specified curve as a template
Shape.CreateEnvelopeFromShape applies an envelope by using the specified shape as a template
These methods provide parameters for various envelope settings.
The envelope-creation methods return an Effect object, the Effect.Envelope property for which you can
use to modify the created envelope.
Applying extrusions
The Shape.CreateExtrude method applies an extrusion to a shape. This method provides optional parameters
for various extrusion settings, such as the angle and color of the extrusion.
The Shape.CreateExtrude method returns an Effect object, the Effect.Extrude property for which you
can use to modify the created extrusion.
Applying lenses
The Shape.CreateLens method applies a lens to a shape. This method provides optional parameters for various
lens settings, such as the color and magnitude of the lens.

137
The Shape.CreateLens method returns an Effect object, the Effect.Lens property for which you can use
to modify the created lens.
Applying perspective
The Shape.CreatePerspective method applies perspective to a shape. This method provides optional
parameters for specifying horizontal and vertical vanishing points.
The Shape.CreatePerspective method returns an Effect object, the Effect.Perspective property for
which you can use to modify the created perspective effect.
Searching for shapes

In your macros, you can include queries that search for shapes that have specific shape properties, fill properties,
outline properties, or color properties. To do this, you use Corel Query Language (CQL) in conjunction with one
of the following methods:
Shape.Evaluate returns the result of a given expression that evaluates the properties of the current shape
Shapes.FindShape returns a single shape that has the specified properties
Shapes.FindShapes returns, as a shape range, all shapes that have the specified properties
You can specify the shape properties for which to search. For example, the expression
ActiveShape.Evaluate("@name") searches searches the Name property of all selected shapes.
Consider the following VBA code sample, in which the Type property and the Width property are used to select
all rectangles that are wider than two inches:
ActivePage.Shapes.FindShapes(Query := "@type = 'rectangle' and _
@width > {2 in}").CreateSelection
For comprehensive information on using CQL, see Including queries in macros in the Macros Help file for the
application.
Deleting shapes
If you want, you can use event handlers to respond to events that are triggered by deleting a shape:
Document.ShapeDelete
Working with import filters and export filters

As previously discussed, methods are available for importing files (see Importing files into layers on page 100)
and exporting files (see Exporting files from documents on page 86).
These file-import and file-export methods can also be used for performing batch conversions or modifying
file repositories.
application. Each filter lets you work with the files from another graphics application.

138
In this topic
To learn more about working with filters, see the following subtopics:
Working with import filters on page 139
Working with export filters on page 141
Working with import filters

To ensure the portability of a file-import script, you must use the default ImportFilter object (rather than the
filter-specific object DSFImport), as in the following VBA example:
Sub OpenRectangle()
Dim FilterObject As ImportFilter
'Initialize FilterObject
Set FilterObject = ActiveLayer.ImportEx("C:\devo\rect.dsf", _
cdrDSF)
'Set the advanced features of the filter
FilterObject.DefaultLinestyle = 1 'Dashed
FilterObject.DeleteInvisibleObjects = True
'Invoke the filter
FilterObject.Finish
End Sub
For best results, use the filter-specific object DSFImport only to learn the specific interfaces that are supported
by a filter. For example, the following screenshot demonstrates that the ImportFilter object exposes only generic
interfaces in Microsoft IntelliSense because the ImportFilter interface is generic (and not filter-specific). The
ImportFilter object does not contain the DefaultLinestyle and DeleteInvisibleObjects properties; however,
you can still set these properties in the ImportFilter interface if they are supported by the specified import filter.

139
As previously discussed, using the ImportFilter object (rather than the filter-specific object DSFImport)
ensures that a file-import script can be used on any other workstation running the same version of the
application. To reference the properties, methods, and enumerations for a specific filter, locate that filter in the
Object Browser. For example, the following screenshot demonstrates that the line-style dsfDashed2 can be
specified by assigning a value of 7 to the DefaultLinestyle property.
To access the object model for a filter, click Tools ` References from within the Macro Editor. In the
References dialog box that appears, click Browse, and navigate to the Filters folder of the installed software.
Select the dynamic-link library (DLL) file for the desired filter, and then click OK. When the References dialog
box reappears, enable the checkbox that corresponds to the desired filter, and then click OK. You can now access
the object model for the filter, as in the following VBA example:
Sub OpenRectangleDSF()
Dim FilterObject As DSFImport
Dim Style As DsfLinestyle
Set FilterObject = ActiveLayer.ImportEx("C:\devo\rect.dsf", _
cdrDSF)
Style = dsfDashed
FilterObject.DefaultLinestyle = Style
FilterObject.DeleteInvisibleObjects = True
'Invoke the filter
FilterObject.Finish
End Sub

140
Working with an import filter is made much easier by having the script access the object model for that filter;
however, as discussed, this technique reduces the portability of the script. When used at another workstation, the
script must first be updated with the correct location of the DLL file for the filter.
Working with export filters

The following VBA example demonstrates how to save a document as an AutoCAD DXF file by using an export
filter:
Sub SaveRectangleDXF()
Dim FilterObject As DXFExport
Dim BitmapType As DxfBitmapType
Dim TextAsCurves As Boolean
Dim Units As DxfUnits
Dim Version As DxfVersion
Set FilterObject = ActiveDocument.ExportEx("C:\devo\rect.dxf", _
cdrDXF)
BitmapType = dxfBitmapGIF
FilterObject.BitmapType = BitmapType
Units = dxfInches
FilterObject.Units = Units
TextAsCurves = False
FilterObject.TextAsCurves = TextAsCurves

141
Version = dxfVersion2000
FilterObject.Version = Version
'Invoke the filter
FilterObject.Finish
End Sub
In the preceding example, a call is made to ActiveDocument.ExportEx method, and the interface for the
export filter (DXFExport) is invoked. However, you can use the generic export interface (ExportFilter) rather
than the filter-specific interface (DXFExport), as in the following VBA example:
Sub SaveRectangle()
Dim FilterObject As ExportFilter
Set FilterObject = ActiveDocument.ExportEx("C:\devo\rect.dxf", cdrDXF)
FilterObject.BitmapType = 1 'GIF
FilterObject.Units = 0 'Inches
FilterObject.TextAsCurves = False
FilterObject.Version = 1 'AutoCAD 2000
'Invoke the filter
FilterObject.Finish
End Sub
The following VBA example demonstrates how to invoke the Export dialog box:
Sub ShowExportDialog()
Dim FilterObject As ExportFilter
Dim vntReturn As Variant
Set FilterObject = ActiveDocument.ExportEx("C:\devo\rect.dxf", cdrDXF)
'If FilterObject supports a dialog, invoke it
If (FilterObject.HasDialog = True) Then

142
vntReturn = FilterObject.ShowDialog
'Verify that the user clicked "OK" and not "Cancel"
If (vntReturn = True) Then
'Invoke the filter
FilterObject.Finish
End If
End If
End Sub
The preceding example requires you to check the return value of the dialog box, and to invoke the Finish
method for when the user clicks OK.

143
Glossary
argument
See parameter.
array
A set of sequentially indexed objects of the same data type (or array elements)
Each array element has the same data type (although elements can have different values), and the entire array is
stored contiguously in memory (with no gaps between elements). For example, you could have an array of integers
or an array of characters or an array of anything that has a defined data type.
By default, array indexes are zero-based.
Arrays can have more than one dimension. A one-dimensional array is called a vector, while a two-dimensional
array is called a matrix.
automation
The process of recording or scripting a macro

class
The definition of each property, method, and event that applies to a type of object in the application
class module
A type of module that contains the definition of an object-oriented Visual Basic class, including the definitions
of the properties and methods for that class
collection
A group of objects that have similar characteristics and similar actions but that are uniquely identified by index
names or index numbers
Collections are always plural. For example, Documents is a collection of Document objects.
constant
A value in an automation-programming structure that remains fixed while the macro is being executed
Unlike a variable, which temporarily stores a changing data value in a code procedure or code function, constant
values do not change.
A constant is an instance of an enumeration.
dithering
The process of simulating color by putting dots of another color very close together
The Windows operating system uses dithering to display colors that the graphics adapter cannot display.

Glossary
144
enumeration
Also called an enumerated type, a data type that lists all possible values for the variables that use it
Unlike a variable, which temporarily stores a changing data value, an enumeration stores fixed values.
A constant is an instance of an enumeration.
enumerated type
See enumeration.
event
An action that takes place in an object and that is recognized by a form or control
Each object within an object model is defined by a property, method, event, or a combination of each. An event
is triggered by an action such as a click, key press, or system timer and you can write code that causes an
object to respond to that event.
event-driven programming
A style of programming, unlike traditional procedural programming (in which the program starts at line 1 and
executes line by line), that executes code in response to events
Visual Basic for Applications is an event-driven programming language. Most of the code you create is written to
respond to an event.
Compare with object-oriented programming.
event handler
A subroutine that is programmed to cause the application to respond to a specific event

form
A type of module that is used for customized dialog boxes and user interfaces, and that includes the code to
control them
function
A procedure that performs a given task in a macro and that can be used to return a value
A function procedure begins with a Function statement and ends with an End Function statement. In VBA
and VSTA, functions do not need to be declared before being used, nor before being defined.
gap
A space between dashes in an outline style

global value
A value that applies to a given project in its entirety

Glossary
145
GMS file
Also called a project file (and short for Global Macro Storage file), the location to which the Macro Editor
stores all modules for a project
index number
A reference to an object in a collection that contains more than one object

An index number is used to identify each object in a collection. The index number can range from 1 to the number
of available objects within the collection.
macro
A recorded or scripted set of tasks that can be repeatedly invoked within an application
A macro is a symbol, name, or key that represents a list of commands.
method
An operation that an object can have performed on itself

modal dialog box
A dialog box thatlocks the application and must be acted upon (that is, either submitted or cancelled) before the
macro can be resumed
Most built-in dialog boxes that can be controlled by automation coding are modal.
modeless dialog box
A dialog box that does not lock the application and can be left open while the user continues working in the
application
Modeless dialog boxes behave like dockers.
module
A container that is used by a GMS file for storing project components

Generic modules are used for general code and for macros. Other types of modules include forms and class
modules.
object
When referring to an object model, an instance of a class

object model
A high-level structure of the relationship between the parent objects and child objects in an application
For example, the Application object represents the beginning of the object hierarchy. From the Application
object, you can drill down and navigate through the object model until you find the desired object. To reference
an object with Visual Basic code, you separate each level of the object hierarchy with the dot operator ( . ).

Glossary
146
object-oriented programming
A style of programming that places emphasis on creating and using objects

Compare with event-driven programming.
parameter
Synonymous with argument, a value that is passed to a routine and that defines a characteristic of an object in
the Visual Basic programming environment
Parameters are attributes that appear after a recorded command in the Recorder docker. For example, dialogbox options are not recorded as separate commands in the Recorder docker; they are recorded as attributes of the
command that initially invoked the dialog box.
passing by reference
The act of passing an argument to a function or subroutine by using a reference to the original
By default, function parameters and subroutine parameters are passed by reference. To explicity indicate that
you want to pass an argument by reference, prefix the argument with ByRef.
passing by value
The act of passing an argument to a function or subroutine by using a copy of the original
To explicity indicate that you want to pass an argument by value, prefix the argument with ByVal.
property
A characteristic of a class
Properties can be returned or set. In addition, properties can be designated as read-only (to indicate that they are
fixed by the design of the class).
range
A series of similar objects

scope
The visibility of a data type, procedure, or object

shortcut object
A syntactic replacement for the longhand version of an object

String
A data type consisting of a sequence of contiguous characters that represent the characters themselves rather than
their numeric values
A string can include letters, numbers, spaces, and punctuation. The String data type can store fixed-length
strings ranging in length from 0 to approximately 63K characters and dynamic strings ranging in length from 0
to approximately 2 billion characters. The dollar sign ( $ ) type-declaration character represents a string in
Visual Basic.

Glossary
147
sub
See subroutine.
subroutine
Sometimes called a sub, a procedure that performs a given task in a macro but cannot be used to return a value
A subroutine procedure begins with a Sub statement and ends with an End Sub statement. In VBA and VSTA,
subroutines do not need to be declared before being used, nor before being defined.
variable
An item that can be created (or declared) for the purposes of storing data
The built-in data types are Boolean, Double, Integer, Long, Single, String, Variant, and several other lessused types including Date, Decimal, and Object. If a variable is not declared before being used, the compiler
interprets it as a Variant.
Variant
The data type for all variables that are not declared as another type, such as Dim, Private, Public, or Static
The Variant data type has no type-declaration character.
VBA
A built-in programming language that can automate repetitive functions and create intelligent solutions in a
software application
VBA is a subset of the Microsoft Visual Basic (VB) object-driven programming environment, but it is considered
for applications because it is most often integrated into another application to customize the functionality of
that application.
Visual Basic for Applications
See VBA.
Visual Studio Tools for Applications
See VSTA.
VSTA
The successor to VBA

VSTA is based on Microsoft Visual Studio 2008. The integrated development environment (IDE) for VSTA can
be used to support two additional programming languages (Visual Basic .NET and C#) and to take advantage of
the .NET framework natively.

Glossary
148
Index
A
checking syntax . . . . . . . . . . . . . . . . . . . . . . . . . . .33

circles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
activating
documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
layers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94
shapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121
Add-in Manager . . . . . . . . . . . . . . . . . . . . . . . . . . .28

add-ins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
allocating memory . . . . . . . . . . . . . . . . . . . . . . . . .16
class modules
adding to macro projects . . . . . . . . . . . . . . . . . .45
classes
understanding . . . . . . . . . . . . . . . . . . . . . . . . . .11
closing
documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91
macro projects . . . . . . . . . . . . . . . . . . . . . . . . . .44
code
Application class
understanding . . . . . . . . . . . . . . . . . . . . . . . . . .72
arcs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
arguments, passing . . . . . . . . . . . . . . . . . . . . . . . .16
arrays
declaring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
assignments, Boolean . . . . . . . . . . . . . . . . . . . . . .17

automation
coding structure . . . . . . . . . . . . . . . . . . . . . . . . .13
setting up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
supported environments . . . . . . . . . . . . . . . . . . .5
understanding . . . . . . . . . . . . . . . . . . . . . . . . . . .4
use of object models in . . . . . . . . . . . . . . . . . . .10
automation elements . . . . . . . . . . . . . . . . . . . . . . .10
stepping through . . . . . . . . . . . . . . . . . . . . . . . .53

understanding structure of . . . . . . . . . . . . . . . .13
code modules
adding macros . . . . . . . . . . . . . . . . . . . . . . . . . .46
deleting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
displaying or hiding . . . . . . . . . . . . . . . . . . . . . .45
editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
renaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Code window in Macro Editor . . . . . . . . . . . . . . .31

coding dialog boxes . . . . . . . . . . . . . . . . . . . . . . . .59
collections
counting items in . . . . . . . . . . . . . . . . . . . . . . . .21
parsing items in . . . . . . . . . . . . . . . . . . . . . . . . .21
referencing in macros . . . . . . . . . . . . . . . . . . . . .20
referencing items in . . . . . . . . . . . . . . . . . . . . . .20
understanding . . . . . . . . . . . . . . . . . . . . . . . . . .11
bitwise operators . . . . . . . . . . . . . . . . . . . . . . . . . .18
color components . . . . . . . . . . . . . . . . . . . . . . . .134
blends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136
color models
Boolean comparisons and assignments . . . . . . .17

breakpoints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
building functions and subroutines . . . . . . . . . . .15
buttons
adding to macro toolbars . . . . . . . . . . . . . . . . . .55
providing in dialog boxes . . . . . . . . . . . . . . . . . .61
C
C and C++
vs. VBA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Call Stack window . . . . . . . . . . . . . . . . . . . . . . . . .50

captions, macro . . . . . . . . . . . . . . . . . . . . . . . . . . .55
specifying color components . . . . . . . . . . . . . .134

specifying for colors . . . . . . . . . . . . . . . . . . . . .134
working with . . . . . . . . . . . . . . . . . . . . . . . . . .134
coloring
shapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130
syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
colors
converting color models for . . . . . . . . . . . . . . .134
copying properties . . . . . . . . . . . . . . . . . . . . . .134
creating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134
specifying color models . . . . . . . . . . . . . . . . . .134
working with . . . . . . . . . . . . . . . . . . . . . . . . . .134
combination boxes
providing in dialog boxes . . . . . . . . . . . . . . . . . .61
command groups . . . . . . . . . . . . . . . . . . . . . . . . . .85

Index
149
comments, in macro code . . . . . . . . . . . . . . . . . . .16
providing list boxes . . . . . . . . . . . . . . . . . . . . . .

providing text boxes . . . . . . . . . . . . . . . . . . . . .
setting up . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
comparisons, Boolean . . . . . . . . . . . . . . . . . . . . . .17

completion of code, automatic . . . . . . . . . . . . . .33
constants
61
60
57
59
displaying
understanding . . . . . . . . . . . . . . . . . . . . . . . . . .12
contextual pop-up lists for coding . . . . . . . . . . . .33

contours . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136
controls, dialog box
documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
layers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
distortions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
documentation, macro
creating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
list of available . . . . . . . . . . . . . . . . . . . . . . . . . .58
converting color models . . . . . . . . . . . . . . . . . . .134

coordinates, capturing . . . . . . . . . . . . . . . . . . . . .66
documents
activating . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
closing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
creating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
creating command groups . . . . . . . . . . . . . . . .
displaying . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
exporting files . . . . . . . . . . . . . . . . . . . . . . . . . .
modifying . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
publishing to PDF . . . . . . . . . . . . . . . . . . . . . . .
saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
setting properties . . . . . . . . . . . . . . . . . . . . . . .
working with . . . . . . . . . . . . . . . . . . . . . . . . . .
copying
color properties . . . . . . . . . . . . . . . . . . . . . . . .134
macro projects . . . . . . . . . . . . . . . . . . . . . . . . . .44
counting items in a collection . . . . . . . . . . . . . . .21

curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
customized effects . . . . . . . . . . . . . . . . . . . . . . . .136
D
Debug toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
debugging macros
81
91
80
85
82
86
84
80
89
88
85
82
72
drawing scales . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
methods for . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

windows for . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
declaring
arrays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
enumerations . . . . . . . . . . . . . . . . . . . . . . . . . . .14
strings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
defining scope . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

definitions, jumping to . . . . . . . . . . . . . . . . . . . . .33
deploying
macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
workspaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
drop shadows . . . . . . . . . . . . . . . . . . . . . . . . . . . 137

duplicating shapes . . . . . . . . . . . . . . . . . . . . . . . 125
E
Edit toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
editing
code modules . . . . . . . . . . . . . . . . . . . . . . . . . . 45
macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
effects, shape . . . . . . . . . . . . . . . . . . . . . . . . . . . 135

elements, automation . . . . . . . . . . . . . . . . . . . . . 10
deselecting shapes . . . . . . . . . . . . . . . . . . . . . . . .125
ellipses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
designing dialog boxes . . . . . . . . . . . . . . . . . . . . .58
ending lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
dialog boxes
enumerated types (enumerations) . . . . . . . . . . . 12

coding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
designing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
displaying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
macro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
naming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
providing buttons . . . . . . . . . . . . . . . . . . . . . . . .61
providing combination boxes . . . . . . . . . . . . . . .61
providing images in . . . . . . . . . . . . . . . . . . . . . .63
enumerations
declaring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
understanding . . . . . . . . . . . . . . . . . . . . . . . . . 12
envelopes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
event handlers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
events
understanding . . . . . . . . . . . . . . . . . . . . . . . . . 12

Index
150
export filters
images
understanding . . . . . . . . . . . . . . . . . . . . . . . . .138
working with . . . . . . . . . . . . . . . . . . . . . . . . . .141
exporting
associating with macros . . . . . . . . . . . . . . . . . . 55

providing in dialog boxes . . . . . . . . . . . . . . . . . 63
Immediate window . . . . . . . . . . . . . . . . . . . . . . . 50
documents to PDF . . . . . . . . . . . . . . . . . . . . . . .88

files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
GMS files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
workspace features . . . . . . . . . . . . . . . . . . . . . .69
extrusions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137
import filters
understanding . . . . . . . . . . . . . . . . . . . . . . . . 138
working with . . . . . . . . . . . . . . . . . . . . . . . . . 139
importing
files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
GMS files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
workspace features . . . . . . . . . . . . . . . . . . . . . . 69
input boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
files
exporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
importing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
fills
fountain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131
hatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133
pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132
PostScript . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133
texture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132
uniform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131
filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
inserting pages . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
installing VBA and VSTA . . . . . . . . . . . . . . . . . . . 25
J
Java and JavaScript
vs. VBA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
jumping to definitions . . . . . . . . . . . . . . . . . . . . . 33
Form Designer . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
formatting code . . . . . . . . . . . . . . . . . . . . . . . . . . .31
layers
activating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
creating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
deleting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
hiding and displaying . . . . . . . . . . . . . . . . . . . . 99
importing files . . . . . . . . . . . . . . . . . . . . . . . . . 100
locking and unlocking . . . . . . . . . . . . . . . . . . . . 99
renaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
reordering . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
working with . . . . . . . . . . . . . . . . . . . . . . . . . . 97
forms (dialog boxes)

adding to projects . . . . . . . . . . . . . . . . . . . . . . .44
creating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
fountain fills . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131

functions
building . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
jumping to definitions . . . . . . . . . . . . . . . . . . . .33
lenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
G
getting started with macros . . . . . . . . . . . . . . . . .25
GMS files
exporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
importing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
working with . . . . . . . . . . . . . . . . . . . . . . . . . . .42
lines of code, ending . . . . . . . . . . . . . . . . . . . . . . 16

lines, creating . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
list boxes
loading macro projects . . . . . . . . . . . . . . . . . . . . 44

Locals window . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
locking layers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
hatch fills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133
logical operators . . . . . . . . . . . . . . . . . . . . . . . . . . 18
hiding layers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
M
I
Macro Editor
icons, macro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Code window . . . . . . . . . . . . . . . . . . . . . . . . . . 31
debugging windows . . . . . . . . . . . . . . . . . . . . . 50

Index
151
Object Browser . . . . . . . . . . . . . . . . . . . . . . . . . .35

Project Explorer . . . . . . . . . . . . . . . . . . . . . . . . .30
Properties window . . . . . . . . . . . . . . . . . . . . . . .34
toolbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
memory pointers . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Macro Manager docker . . . . . . . . . . . . . . . . . . . . .27
understanding . . . . . . . . . . . . . . . . . . . . . . . . . 12
macro projects
memory, allocating . . . . . . . . . . . . . . . . . . . . . . . . 16
message boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
methods
modal dialog boxes
adding class modules . . . . . . . . . . . . . . . . . . . . .45

adding code modules . . . . . . . . . . . . . . . . . . . . .44
adding dialog boxes . . . . . . . . . . . . . . . . . . . . . .44
adding macros . . . . . . . . . . . . . . . . . . . . . . . . . .46
copying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
creating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
loading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
renaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
understanding . . . . . . . . . . . . . . . . . . . . . . . . . .42
unloading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
macro resources . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
macro toolbars
adding buttons . . . . . . . . . . . . . . . . . . . . . . . . . .55
creating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
macros
captions for . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
comments in . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
creating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
debugging . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
deleting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
deploying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
getting started with . . . . . . . . . . . . . . . . . . . . . .25
images or icons for . . . . . . . . . . . . . . . . . . . . . . .55
options for . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
organizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
providing dialog boxes . . . . . . . . . . . . . . . . . . . .56
providing documentation . . . . . . . . . . . . . . . . . .66
providing event handlers in . . . . . . . . . . . . . . . .23
providing user interaction . . . . . . . . . . . . . . . . .64
recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
referencing collections . . . . . . . . . . . . . . . . . . . .20
referencing objects . . . . . . . . . . . . . . . . . . . . . . .19
running . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
sample . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
toolbars for . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
tooltips for . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
understanding . . . . . . . . . . . . . . . . . . . . . . . . . . .4
using object shortcuts in . . . . . . . . . . . . . . . . . .22
writing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
understanding . . . . . . . . . . . . . . . . . . . . . . . . . 56
vs. modeless . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
modeless dialog boxes

understanding . . . . . . . . . . . . . . . . . . . . . . . . . 57
vs. modal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
mouse
capturing clicks . . . . . . . . . . . . . . . . . . . . . . . . . 64
capturing coordinates . . . . . . . . . . . . . . . . . . . . 66
capturing drags . . . . . . . . . . . . . . . . . . . . . . . . . 65
N
naming dialog boxes . . . . . . . . . . . . . . . . . . . . . . 59
O
Object Browser in Macro Editor
Class list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Information window . . . . . . . . . . . . . . . . . . . . .
Member list . . . . . . . . . . . . . . . . . . . . . . . . . . . .
search controls . . . . . . . . . . . . . . . . . . . . . . . . .
using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
37
39
38
40
35
object model
definition of . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
overview of . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
objects
jumping to definitions . . . . . . . . . . . . . . . . . . .
referencing in macros . . . . . . . . . . . . . . . . . . . .
understanding . . . . . . . . . . . . . . . . . . . . . . . . .
using shortcuts in macros . . . . . . . . . . . . . . . . .
33
19
10
22
opening
documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
macro projects . . . . . . . . . . . . . . . . . . . . . . . . . 44
operators
logical and bitwise . . . . . . . . . . . . . . . . . . . . . . 18
organizing macros . . . . . . . . . . . . . . . . . . . . . . . . 68
orientation, page . . . . . . . . . . . . . . . . . . . . . . . . . 95
outlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Macros toolbar
Corel PHOTO-PAINT . . . . . . . . . . . . . . . . . . . . . .27
CorelDRAW . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
P
pages
activating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Macro P rogram m ing Guide

Index
152
deleting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
inserting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93
modifying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
reordering . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
sizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
specifying size and orientation . . . . . . . . . . . . . .95
working with . . . . . . . . . . . . . . . . . . . . . . . . . . .91
reference, passing by . . . . . . . . . . . . . . . . . . . . . . 16
panning documents . . . . . . . . . . . . . . . . . . . . . . . .84
code modules . . . . . . . . . . . . . . . . . . . . . . . . . . 45
layers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
macro projects . . . . . . . . . . . . . . . . . . . . . . . . . 44
projects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
referencing
collections in macros . . . . . . . . . . . . . . . . . . . . . 20
items in collections . . . . . . . . . . . . . . . . . . . . . . 20
objects in macros . . . . . . . . . . . . . . . . . . . . . . . 19
renaming
parsing items in a collection . . . . . . . . . . . . . . . . .21

passing arguments
passing by reference . . . . . . . . . . . . . . . . . . . . . .16
passing by value . . . . . . . . . . . . . . . . . . . . . . . . .16
understanding . . . . . . . . . . . . . . . . . . . . . . . . . .16
pattern fills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132

PDF, publishing to . . . . . . . . . . . . . . . . . . . . . . . . .88
reordering
layers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
shapes in selections . . . . . . . . . . . . . . . . . . . . 125
resources
perspective effects . . . . . . . . . . . . . . . . . . . . . . . .138
for macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
for software . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
pie shapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
rotating shapes . . . . . . . . . . . . . . . . . . . . . . . . . . 129
playing macros . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
running macros
methods for . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
saved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
temporary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
pointers, memory . . . . . . . . . . . . . . . . . . . . . . . . . .16

pop-up lists for coding . . . . . . . . . . . . . . . . . . . . .33
positioning shapes . . . . . . . . . . . . . . . . . . . . . . . .129
PostScript fills . . . . . . . . . . . . . . . . . . . . . . . . . . . .133
printing documents . . . . . . . . . . . . . . . . . . . . . . . .89
sample macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Project Explorer in Macro Editor . . . . . . . . . . . . . .30
saving
project files
creating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
exporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
importing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
projects, macro
creating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
properties
understanding . . . . . . . . . . . . . . . . . . . . . . . . . .11
Properties window . . . . . . . . . . . . . . . . . . . . . . . . .34

properties, color
copying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134
publishing to PDF . . . . . . . . . . . . . . . . . . . . . . . . . .88
documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
recorded macros . . . . . . . . . . . . . . . . . . . . . . . . 47
scales, drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
scaling shapes . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
scope, defining . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
searching for
shapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
selecting
shapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
selections
accessing copies of . . . . . . . . . . . . . . . . . . . . .
accessing directly . . . . . . . . . . . . . . . . . . . . . .
accessing shapes in . . . . . . . . . . . . . . . . . . . . .
reordering shapes in . . . . . . . . . . . . . . . . . . . .
123
122
124
125
setting breakpoints . . . . . . . . . . . . . . . . . . . . . . . . 52
recording macros
for future use . . . . . . . . . . . . . . . . . . . . . . . . . . .47
for temporary use . . . . . . . . . . . . . . . . . . . . . . . .48
methods for . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
rectangles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
reference points . . . . . . . . . . . . . . . . . . . . . . . . . . .82
shapes
accessing in selections . . . . . . . . . . . . . . . . . .
applying effects . . . . . . . . . . . . . . . . . . . . . . .
coloring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
creating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
deleting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Index
124
135
130
111
138
153
deselecting . . . . . . . . . . . . . . . . . . . . . . . . . . . .125
determining type . . . . . . . . . . . . . . . . . . . . . . .121
duplicating . . . . . . . . . . . . . . . . . . . . . . . . . . . .125
positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . .129
reordering in selections . . . . . . . . . . . . . . . . . .125
rotating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129
scaling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
searching for . . . . . . . . . . . . . . . . . . . . . . . . . .138
selecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121
sizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
skewing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
stretching . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
transforming . . . . . . . . . . . . . . . . . . . . . . . . . .125
working with . . . . . . . . . . . . . . . . . . . . . . . . . .102
shortcuts
using in macros . . . . . . . . . . . . . . . . . . . . . . . . .22
text objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

texture fills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
toolbars
Debug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
UserForm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
35
35
26
35
35
toolbars, macro
adding buttons . . . . . . . . . . . . . . . . . . . . . . . . . 55
creating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
providing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
tooltips, macro . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
transforming shapes . . . . . . . . . . . . . . . . . . . . . . 125
size, page
default, specifying . . . . . . . . . . . . . . . . . . . . . . .95
specifying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
using defined . . . . . . . . . . . . . . . . . . . . . . . . . . .96
sizing
pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
shapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
skewing shapes . . . . . . . . . . . . . . . . . . . . . . . . . . .128

software resources . . . . . . . . . . . . . . . . . . . . . . . . . .2
squares . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Standard toolbar . . . . . . . . . . . . . . . . . . . . . . . . . .35
stepping through code . . . . . . . . . . . . . . . . . . . . .53
stretching shapes . . . . . . . . . . . . . . . . . . . . . . . . .128
strings
U
Undo string
setting for documents . . . . . . . . . . . . . . . . . . . . 85
uniform fills . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

units of measurement
setting for documents . . . . . . . . . . . . . . . . . . . . 82
unloading macro projects . . . . . . . . . . . . . . . . . . 44

unlocking layers . . . . . . . . . . . . . . . . . . . . . . . . . . 99
user interaction, providing for macros . . . . . . . 64
user interfaces, providing for macros . . . . . . . . 54
UserForm toolbar . . . . . . . . . . . . . . . . . . . . . . . . . 35
declaring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
structuring code . . . . . . . . . . . . . . . . . . . . . . . . . . .13
subroutines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
value, passing by . . . . . . . . . . . . . . . . . . . . . . . . . . 16
subs (subroutines) . . . . . . . . . . . . . . . . . . . . . . . . .15
variables
supported automation environments . . . . . . . . . .5

symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
syntax
checking automatically . . . . . . . . . . . . . . . . . . . .33
coloring automatically . . . . . . . . . . . . . . . . . . . .32
declaring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
jumping to definitions . . . . . . . . . . . . . . . . . . . 33
VB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
VBA
recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
running . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
options for . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
understanding . . . . . . . . . . . . . . . . . . . . . . . . . . 6
vs. C and C++ . . . . . . . . . . . . . . . . . . . . . . . . . . 8
vs. Java and JavaScript . . . . . . . . . . . . . . . . . . . . 7
vs. VB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
vs. VBScript . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
vs. Windows Script Host . . . . . . . . . . . . . . . . . . . 8
testing dialog boxes . . . . . . . . . . . . . . . . . . . . . . . .59
VBScript . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
text boxes
views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
T
temporary macros

Index
154
Visual Basic (VB) . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Visual Basic for Applications (VBA) . . . . . . . . . . . .6
Visual Basic Script (VBScript) . . . . . . . . . . . . . . . . .7
Visual Studio Tools for Applications (VSTA) . . . . .8
VSTA
installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
understanding . . . . . . . . . . . . . . . . . . . . . . . . . . .8
VSTA Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
W
Watches window . . . . . . . . . . . . . . . . . . . . . . . . . .50
windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Windows Script Host
vs. VBA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
workspaces
deploying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
exporting features . . . . . . . . . . . . . . . . . . . . . . .69
importing features . . . . . . . . . . . . . . . . . . . . . . .69
writing macros . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Z
zooming in documents . . . . . . . . . . . . . . . . . . . . .84

Index
155
Copyright 2012 Corel Corporation. All rights reserved.

CorelDRAW Graphics Suite X6 Macro Programming Guide
Product specifications, pricing, packaging, technical support and information (specifications) refer to the retail
English version only. The specifications for all other versions (including other language versions) may vary.
Information is provided by Corel on an as is basis, without any other warranties or conditions, express or
implied, including, but not limited to, warranties of merchantable quality, satisfactory quality, merchantability
or fitness for a particular purpose, or those arising by law, statute, usage of trade, course of dealing or otherwise.
The entire risk as to the results of the information provided or its use is assumed by you. Corel shall have no
liability to you or any other person or entity for any indirect, incidental, special, or consequential damages
whatsoever, including, but not limited to, loss of revenue or profit, lost or damaged data or other commercial or
economic loss, even if Corel has been advised of the possibility of such damages, or they are foreseeable. Corel is
also not liable for any claims made by any third party. Corels maximum aggregate liability to you shall not
exceed the costs paid by you to purchase the materials. Some states/countries do not allow exclusions or
limitations of liability for consequential or incidental damages, so the above limitations may not apply to you.
Corel, the Corel logo, Corel DESIGNER, CorelDRAW, Corel PHOTO-PAINT, Corel SCRIPT, and
Knowledge Base are trademarks or registered trademarks of Corel Corporation and/or its subsidiaries in Canada,
the U.S., and/or other countries. Other product, font, and company names and logos may be trademarks or
registered trademarks of their respective companies.
117101

Coreldraw Macro Programming Guide

Uploaded by

Coreldraw Macro Programming Guide

Uploaded by

Macro Programming Guide

What are the main elements of automation? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

What is an object model? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

How is automation coding structured? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Declaring variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Getting started with macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Using the Macros toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Using the Project Explorer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Using the VSTA Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Macro Programming Guide

To add a macro to a macro project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

To record and save a macro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

To run a saved macro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Making macros user-friendly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Providing dialog boxes for macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Setting up dialog boxes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Providing user interaction for macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Capturing mouse clicks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Providing documentation for macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Organizing and deploying macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Understanding the CorelDRAW object model . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Macro Programming Guide

Saving documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85

Working with pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Creating pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93

Working with layers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Creating layers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

Working with shapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Creating shapes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111

Working with import filters and export filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138

Working with import filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .139

Macro Programming Guide

This resource contains the following sections.

Understanding automation on page 4

Introduction to the concepts of automation and macros,

Getting started with macros on page 25

Overview of the macro-related tools and features of the

Creating macros on page 42

How to write, record, run, and debug macros

Making macros user-friendly on page 54

How to enhance the usability of macros through dialog

Organizing and deploying macros on page 68

How to organize and deploy the macros you create

Understanding the CorelDRAW object model on

Overview of the most important features and functions of

This section contains the following topics:

About this resource

Macro Programming Guide

The name of a control or other element on the user interface

<text in italics and between angle brackets>

A placeholder for user-specified information, such as a path or filename

About additional resources

Description and filename

Macro Help for CorelDRAW

Provides comprehensive information about the CorelDRAW

Macro Programming Guide

Description and filename

Macro Help for Corel PHOTO-PAINT

Object-model diagram for CorelDRAW

Provides a hierarchical representation of the CorelDRAW object

Object-model diagram for Corel PHOTO-PAINT

Provides a hierarchical representation of the Corel PHOTOPAINT object model

Description and URL

Corel Support Services website

Provides prompt and accurate information about product features,

Corel Knowledge Base

Provides a repository of articles written by the Corel Technical Support

CorelDRAW online community

Provides interaction with other users through sharing experiences, asking

Macro Programming Guide

This section contains the following topics:

Macro Programming Guide

Which sample macros are available?

Which automation environments are supported?

Macro Programming Guide

Macro Programming Guide