SOLID STATE

SOLID STATE
SOLID
(Substances which have definite volume and shape)

1. Classification of Solids
Solids are divided into two classes, namely crystalline and amorphous solids. A solid is said to be crystalline
if the constituents arrange themselves in regular manner throughout the threedimensional network. The
ordered arrangement of building constituents extends over a large distance (long range order). On the other
hand, in amorphous solids, the arrangement of building constituents is not regular (short range order).

Difference between Crystalline and Amorphous Solids :

Page 1 of 36

Amorphous solids

yS

They do not have any pattern of arrangement

of atoms, ions or molecules and, thus do not
have any definite geometrical shape.

ps

2. They have sharp melting points and change

abruptly into liquids

te

1. They have definite and regular geometry due

to definite and orderly arrangement of atoms,
ions or molecules in three-dimensional space.

.in

Crystalline solids

Amorphous solids do not have sharp melting

points and donot change abruptly into liquids.
Amorphous solids are isotropic. Their physical
properties are same in all direction

4. These are considered as true solids

These are considered pseudosolids or

supercooled liquid.

St

ud

3. Crystalline solids are anisotropic. Some of their

physical properties are different in different .
directions

5. Crystalline solids are rigid and their shape is

not distorted by mild distorting forces

Amorphous solids are not very rigid. These

can be distorted by bending or compressing
forces.

6. Crystals are bound by plane faces. The angle

between any two faces is called interfacial angle.
For a given crystalline solid, it is a definite angle
and remains always constant no matter how the
faces develop. When a crystalline solid is
hammered, it breaks up into smaller crystals
of the same geometrical shape.

Amorphous solids not have well defined

planes. When an amorphous solid is broken,
the surfaces of the broken pieces are generally
not flat and intersect at random angles.
(Amorphous solids do not have any symmetry)

7. Example: NaCl, KCl, Sugar, Quartz, etc.

Example :Plastic, Glass, Rubber etc.

www.StudySteps.in

SOLID STATE

Types of crystalline solids

Particles
occupying
lattice points
Binding force
Properties

Example

Ionic
Anions,
cations

Metallic
Metal ions in
electron cloud

Covalent
Atoms

molecular
Molecules (or
atoms)

Electrostatic
attraction
Hard, Brittle,
poor thermal
and electrical
conductors

Metallic
bonds
Soft to very
hard, good
thermal and
electrical
conductors
Li, K, Ca, Cu,
Na, etc.

Covalent
bonds
Very hard,
poor thermal
and electrical
conductors

Van der waals

dipole-diople
Soft, poor
thermal and
electrical
conductors

C(diamond)
SiO2 (quartz),
etc

H2O, H2,
CO2, Ar etc

NaCl, CaBr2,
KNO2, etc

(i)

.in

2. Terms and concepts

Space lattice or crystal lattice

te

ps

It may be defined as a regular three dimensional arrangement of identical points in space.

The positions which are occupied by atoms, ions or molecules in the crystal lattice are called lattice
points or lattice sites.

Lattice Points

St

ud

yS

(ii)

Page 2 of 36

Space lattice and a Unit cell

Unit Cell
A space lattice can be subdivided into a number of small cells known as unit cells. It can be defined
as the smallest block from which entire crystal can be built up by its translational repetition in three
dimensions.
Y
The unit cell shown in figure is characterizes by a, b & c
along the three edges of the unit cell & the angles &
between the pair of edges
The angle is between the edges b & c.
c

Angle is between the edges c & a

X
Angle is between the edges a & b

a
Z

www.StudySteps.in

SOLID STATE
Edge

Corner

2. face

1. E

dia
gon

al

5. Edge
centre

diag
o

ody

7. F
ace

8. B

nal

3. Corner

dge

4. body
centre

6. Face
centre

ps

.in

1. Total number of edges in a cube = 12

2. Total number of faces in a cube = 6
3. Total number of corners in a cube = 8
4. Total number of body centre in a cube = 1
5. Total number of edge centre in a cube = 12
6. Total number of face centre in a cube = 6
7. Total number of face diagonals in a cube = 6 2 = 12
8. Total number of body diagonals in a cube = 4

Primitive or simple Unit Cells: In a primitive unit cell, the same type of particles are present
at all the corners of the unit cell.

yS

(i)

te

3. Types of Lattices and Types of Unit Cell

St

ud

(ii)

Page 3 of 36

simple cubic

Non-primitive or centered unit cells:

There are three types of nonprimitive unit cells as follows:
(a)

Face Centered : When atoms are present in all 8-corners and six face centres in a
cubic unit cell then this arrangement is known as FCC.

face centred cubic (fcc)

www.StudySteps.in

SOLID STATE

(b)

End-Centered : When in addition to particles at the corners, there are particles at the
centres of the end faces.

end centred cubic (fcc)

(c)

Body Centered : When atoms are present at 8 corners as well as in the body centre in a
cubic unit cell then this arrangement is known as BCC.

.in

Body centred cubic (bcc)

te

Parameters of Unit Cell

Intercepts Interfacial angle
Centered, a = b = c
= = = 90o

Bravais Lattices

yS

Crystal System

ps

4. Seven Crystal Systems

Primitive, Face
Body Centered = 3

2. Tetragonal
3. Orthorhombic

4. Hexagonal

Primitive, Body Centered =2 a = b c

Primitive, Face Centered, a b c
Body
Centered,
End
Centered = 4
Primitive = 1
a=bc

5. Rhombohedral
6. Monoclinic

Primitive = 1
Primitive, End Centered = 2

a=b=c

7. Triclinic

Primitive = 1

abc

St

ud

1. Cubic

abc

= = = 90o
= = = 90o
= = 900,
= 120o
= = 90o, 90o
= = 90o,
90o
900

Example
Pb,Hg,Ag,Au
Diamond,
NaCl, ZnS
TiO2,SnO2
KNO2, K2SO4

Mg, SiO2, Zn, Cd

As, Sb, Bi, CaCO3
CaSO4,2H2O
K2Cr2O7,
CaSO45H2O

Total = 14 (Total 14 type of lattices are called Braivais lattices )

Seven Crystal Systems and Fourteen Bravais Lattice

Page 4 of 36

CUBIC

a
a

Simple

a
Face Centred

www.StudySteps.in

Body Centred

SOLID STATE

ORTHORHOMBIC

a Simple

b
End Centred

Body Centred

Face Centred

MONOCLINIC

TETRAGONAL

c
a

Simple

Body Centred

RHOMBOHEDRAL

TRICLINIC

a
a

yS

b g
a

te

HEXAGONAL

ps

End Centred

Simple

.in

120o

ud

5. Calculation of number of particles in a unit cell (Z)

St

(i)

In a crystal atoms located at the corner and face center of a unit cell are shared by other cells and
only a portion of such an atom actually lies within a given unit cell.
A point that lies at the corner of a unit cell is shared among eight unit cells and therefore, only one
eighth of each such point lies within the given unit cell.
6

5
2

(ii)

Page 5 of 36

4
3

A point along an edge is shared by four unit cells and only onefourth of it lies within any one cell.

www.StudySteps.in

SOLID STATE

(iii)

A facecentered point is shared by two unit cells and only one half of it is present in a given unit cell.
2

5
8

(iv)

A bodycentered point lies entirely within the unit cell and contributes one complete point to the cell.
2

3
4

5
8

Contribution to one unit cell

.in

Type of Lattice point

Corner

1/8

ps

Edge

te

Facecenter

1/2
1

yS

Body Center

1/4

Calculation of number of particles in a unit cell

Lattice points
at corners

Lattice points
Lattice points
at face-centered at body centered

ud

Type of unit cell

Z = no. of lattice
points per unit cell

1
=1
8

BCC

1
+11 = 2
8

FCC

1
1
+6 = 4
8
2

St
8

SCC

6. Relation between edge length of unit cell and radius of atoms

(i)

Page 6 of 36

Simple cubic or Primitive

(a)

edge length of unit cell a = 2 r

(b)
a

r
(c)

www.StudySteps.in

atomic radius r = a/2

SOLID STATE

(ii)

Body centre cubic

(a)

edge length of unit cell =

4
r
3

(b)

atomic radius, r =

3a
4

atomic radius r =

2a
4

3a

(iii) Face centre cubic/cubic close packed

edge length of unit cell a =

4r
2

(b)

.in

(a)

ps

ud

yS

te

2a

Solution:

Page 7 of 36

St

Illustration 1: A solid has a cubic structure in which X atoms are located at the corners
of the cube, Y atoms are at the cube centres and O atoms are at the edge
centres. What is the formula of the compound?
Atoms of X are present at all the eight corners of the cube. Therefore, each atom
of X at the corner makes 1/8 contribution towards the unit cell.
1
8

Number of atoms of X per unit cell = 8 1

Y atom is present at the body centre, thus contribution of Y towards unit cell
1 = 1
O atom is present at each of the edge centre (number of edges of cube = 12)
And each O atom present at edge centre will make 1/4 contribution towards the unit cell.
=

The number of O atoms per unit cell = 12

1
=3
4

The formula of the compound is, therefore XYO3

www.StudySteps.in

SOLID STATE

Illustration 2: Potassium crystallizes in a body centered cubic lattice. What is the approximate
number of unit cells in 4.0g of potassium? Atomic mass of potassium = 39.
Solution:

There will be eight atoms at corners of the cube and one atom at the body centre.
1
+11=2
8
4
23
Number of atoms in 4.0g of potassium = 6.023 10
39
4 6.023 1023
Number of unit cells in 4.0g of potassium =
= 3.09 1022
39
2

Number of atoms per unit cell = 8

7. Fraction of volume occupied by atoms in a cube

Packing Fraction = Volume of atoms in the cube/Total volume of cube)
Item

Primitive
8 corners

2.

Each atom contributes

1 th 8
8

(a)

corner atom :

(b)

Face centre atom :

nil

(c)

Body centre atom :

nil

FCC

8 corners, 1 centre 8 corners, 6 face centres

1 th 8
8

1 th 8
8

nil

one one

1 6
6
nil

.in

Atoms occupy :

ps

1.

BCC

No. of atoms in the cube (Z):

one

two

four

4.

Radius of the atom :

5.

Total volume of atoms :

6.

Edge of the cube :

2 4 r3
3
a

4 4 r3
3
a

7.

Edge of the cube in terms of r :

a= 4 r
3

a=

yS

te

3.

St

ud

1 4 r3
3
a
a = 2r

4r
2
3

8.

Total volume of the cube, a :

(2 r)

4 r

9.

Fraction of volume occupied :

4 r3
3

8 r3
3

16 r3
3

8 r3

64 3
r
3 3

64 3
r
2 2
2
6
0.7405

Total volume of atoms

Total volume of cube

4 r

10.

(or) packing fraction :

11.

(or) volume occupied by atoms :

0.52

3
8
0.6802

12.

% volume occupied by atoms :

52%

68.02 %

74.05%

13.

Fraction of void volume :

0.48

0.3198

0.2595

14.

% of void volume in cube :

48%

31.98%

25.95%

15.

% of empty space in cube :

48%

31.98%

25.95%

Page 8 of 36

www.StudySteps.in

SOLID STATE

Illustration 3: Calculate the packing fraction for the Ca unit cell, given that Ca crystallizes in a
face-centered cubic unit cell.
Solution:

Page 9 of 36

One-eight of each corner atom and one-half of each face-centered atom are contained
within the unit cell of Ca giving
1
1
Z = 8 6 4
8
2

Further, atomic radius, r =

2a
4

4
4
Volume of 4 atoms = 4 r = 4 p
3
3

Packing fraction =

2a

4 =

2a 3
6

2a 3 3
2
/a
0.74
6
6

8. Density of unit cell

=

a N 0 10 30
2

te

ps

a is edge of unit cell in pm

Avogadro number (6.02 1023)
Atomic mass of element or formula mass of the compound
No. of atoms present per unit cell or formula units. e.g.
for fcc, Z = 4, for bcc, Z = 2, for simple cubic, Z = 1

yS

where
N0 =
M =
Z=

Z M

.in

Density of unit cell (and hence density of a crystal)

ud

Item
Edge of the unit cell
Volume of the unit cell
Volume of the unit cell
Atomic mass of element
Avogadro number

6.

Mass of one atom of element

7.

No. of atoms in the unit cell

8.

Mass of (z atoms in the) unit cell

9.

Density,

10.

Density of unit cell,

11.

No. of molecules in unit cell z

St

1.
2.
3.
4.
5.

Symbols and formula

a
pm
a3
pm
3
30
a 10 cc
M
NA
M
NA
Z
ZM
NA
mass in g
vol. in cc

ZM
N A .a 3.1030

www.StudySteps.in

a3 NA
M

SOLID STATE

Illustration 4: Gold has a close-packed structure which can be viewed as-spheres occupying
0.74 of the total volume. If the density of gold is 19.3 g/cc, calculate the
apparent radius of a gold ion in the solid
Solution:

Gold has a close-packed structure with a packing fraction value of 0.74. This shows
that it has a face-centered cubic cell. The number of ions in a face-centered unit
cell is 4.
Now
or

density =
19.3 =

Z M
a 3 Na
4 (197)

a 6.02 10
In a face-centered cubic cell.
radius =

2a
=
4

23

a = 4.07b 108 cm

2 4.07 10 8
= 1.439 108 cm
4

Illustration 5:An element occurs in bcc structure with a cell edge of 288 pm. The density
of metal is 7.2 g cm 3. How many atoms does 208 g of the element contain?

.in

Volume of the unit cell = (288 1010)3

= 23.9 1024 cm3

208
= 28.88 cm3
7 .2

te

Volume of 208 g of the element =

ps

Solution:

Number of unit cells in 28.88 cm 3 =

28.88

24

= 12.08 1023 unit cells

ud

yS

23.9 10
Each bcc structure contains 2 atoms.
So total atoms in 12.08 10 23 unit cells = 2 12.08 10 23 = 24.16 1023

St

Illustration 6: When heated above 916C, iron changes its crystal structure from bodycentered cubic to cubic closed packed structure. Assuming that the metallic
radius of the atom does not change, calculate the ratio of density of the bcc
crystal to that of the ccp crystal.
Solution:

Page 10 of 36

In body-centered packing, the efficiency of packing is 67.92%.

In the cubic closed packing the packing efficiency is 74.02%
Let d1 be the density when packing efficiency is 74.02% and d2 is the density when
packing efficiency is 74.02%.
d 2 67.92

0.918
d1 74.02

www.StudySteps.in

SOLID STATE

1. Daily Practice Problem Sheet

A compound formed by elements A and B has a cubic structure in which A atoms are at the corners
of the cube and B atoms are at the face centres. Derive the formula of the compound.

2.

A cubic solid is made up of two elements P and Q. Atoms Q are present at the corners of the cube
and atoms P at the body centre. What is the formula of the compound.

3.

A compound formed by elements X and Y crystallizes in the cubic structure where Y atoms are at
the corners of the cube and X atoms are at the alternate faces. What is the formula of the compound.

4.

A compound formed by elements X and Y crystallizes in the cubic structure where Y atoms are at
the corners of the cube and X atoms are at the alternate edge centres. What is the formula of the
compound?

5.

Calculate the number of atoms in a cubic based unit cell having one atom on each corner and two
atoms on each body diagonal.

6.

A compound made up of elements A and B crystallises in the cubic structure. Atoms A are present
on the corners as well as face centres whereas atoms B are present on the edge centres as well as
body centre. What is the formula of the compound.

7.

Xenon crystallises in the face centered cubic lattice and the edge of the unit cell is 620 pm. What is
the nearest neighbour distance and what is the radius of xenon atom.

8.

If the radius of an atom of an element is 75 pm and the lattice type is body centered cubic, what is
the edge of the unit cell.

9.

The radius of an atom of an element is 500 pm. If it crystallizes as a face centered cubic lattice, what
is the length of the side of the unit cell.

10.

A face centered cubic element (atomic mass 60) has a cell-edge of 400 pm. What is its density.

11.

An element occurs in the BCC structure with cell edge of 288 pm. The density of the element is
7.2 g/cm3. How many atoms of the element does 208 g of the element contain.

12.

Sodium has a bcc structure with nearest neighbour distance 365.9 pm. Calculate its density

13.

Gold crystallizes in a face-centered cubic lattice. If the length of the edge of the unit cell is 407 pm,
calculate the density of gold as well as it atomic radius assuming it to be spherical. [Au = 197 amu].

14.

An element crystallizes in a structure having fcc unit cell of an edge 200 pm. Calculate the density if
200 g of this element contains 24 1023 atoms.

15.

Use the data given below to find the type of cubic lattice to which the crystal of iron belongs :
a = 286 pm, = 7.86 g cm-3. Atomic mass of iron = 56 amu.

16.

The density of a face centered cubic element (atomic mass = 60.2 amu) is 6.25 g cm-3. Calculate the
length of the edge of the unit cell.

17.

A body centered cubic element cubic lattice whose density 10.3 g cm-3 has a cell edge of 314 pm.
Calculate the atomic mass of the element.

18.

Chromium crystallizes in a body-centered cubic lattice whole density is 7.20 g/cm3. The length of
the edge of the unit cell is 288.4 pm. Calculate Avogadros number.

19.

An element occurs in BCC structure. It has a cell edge of 250 pm. Calculate it molar mass if its
density 8.0 g cm-3.

Page 11 of 36

St

ud

yS

te

ps

.in

1.

www.StudySteps.in

SOLID STATE

9. Close packing in crystals

Page 12 of 36

(i)

Close packing in two dimensions

There are two ways to build a crystal plane
Sphere are packed in a such a way that the rows have a horizontal as well as
vertical alignment. In this arrangement, the spheres are found to form square. This
type of packing is also called square close packing.
The number of spheres which are touching a given sphere is called the co-ordination
number. Thus, the coordination number of each sphere in (a) is four.

(a)

The sphere are packed in such a way that the spheres in the second row are placed
in the depressions between the spheres of the first row and so on. This gives rise
to hexagonal close packing of spheres and the coordination number of each sphere
is six.

te

ps

.in

(b)

St

ud

yS

(ii)
Close packing in three dimensions
It is clear from the figure (a) that there are two types of voids or hollows in the first layer.
These are marked as b and c. All the hollows are equivalent but the sphere of second
layer may be placed either on hollows which are marked b or on the other set of hollows
marked c. It may be noted that it is not possible to place spheres on both types of hollows
so the second layer is indicated as dotted in circles in figure b.
When a third layer is to be added, again there two types of hollows available. One type
of hollows marked a are unoccupied hollows of the first layer. The other type of hollows
are hollows in the second layer (marked c). Thus, there are two alternatives to build the
third layer.

a
c

a
c

b
a

b
a

c
b
a

a
c

a
b
a

www.StudySteps.in

a
c

(b)

(a)

c
a

a
c

b
a

a
c

a
c

b
a

a
c

c
b

a
c

b
a

b
a

a
c

b
a

SOLID STATE

(i)

When the third layer is placed over the second layer so as to cover the tetrahedral
or c voids, a threedimensional closest packing is obtained where the spheres in
every third layer are vertically aligned to the first layer. This arrangement is called
ABAB., pattern or hexagonal (HCP) close packing (calling first layer as A and
second layer B).

.in

Hexagonal close packing (hcp)

For HCP geometry Coordination number = 12
For HCP geometry no. of atoms per unit cell

(c)

1
1
+ 2(face centres)
6
2
+ 3 (inside the body) 1 = 6
For HCP geometry packing efficiency = 74 %

ps

(a)
(b)

yS

te

= 12 (corners)

ud

Calculation of Packing efficiency for HCP geometry : Each corner atom would be common to 6
other unit cells, therefore their contribution to one unit cell would be 1/6. Total number of atom in 1 hcp unit
12
2
3
(from 12 corners) + (from 2 face centered) + (from body centre)
6
2
1

St

cell =

a 2r

F
D

C
a

a
E
A

h/2

G
B
A

a/ 3

ABCD is the base of hexagonal unit cell

Page 13 of 36

www.StudySteps.in

SOLID STATE

AD = AB = a . The sphere in the next layer has its centre F vertically above E it touches the three spheres
whose centres are A,B and D.
h
Hence FE = =
2

2r
(2r)

The height of unit cell (h) = 4r

2
3

The area of the base is equal to the area of six equilateral triangles, = 6
The volume of the unit cell = 6

3
2
(2r) 2 4r
.
4
3

4
6 r3
3
0.74;
Therefore, PF =
3
2
2
6
(2r) 4r
4
3

Page 14 of 36

VF 0.26

ps

.in

When the third layer is placed over the second layer such that the spheres cover the octahedral or
d voids, a layer C different from A and B is formed. This pattern is called ABCABCpattern
or cubic close packing (CCP).

ud

yS

te

The ABC ABC ....... peaking has cubic symmetry and is known as cubic close packing (ccp). The
cubic close packing close packing has face centered cubic (fcc) unit cell.

St

(ii)

3
(2r) 2 .
4

Cubic close packing (ccp)

www.StudySteps.in

SOLID STATE

(i)
(ii)
(iii)

For CCP geometry coordination number = 12

For CCP geometry no. of atoms per unit cell = 4 (as calculated before)
For CCP geometry packing efficiency = 74 % (as calculated before)

In the close packing of spheres, certain hollows are left vacant. These holes or voids in
the crystals are called interstitial sites or interstitial voids. Two important interstitial sites are
(i)
triangular
(ii)
tetrahedral
(iii)
octahedral
(iv)
cubical void
(i)

Triangular :

The vacant space (void) formed by touching three spheres.

rvoid
0.155
rsphere

Tetrahedral The vacant space among four spheres having tetrahedral arrangement is

rvoid
0.225 .
rsphere

.in

(ii)

called tetrahedral site or tetrahedral hole. For tetrahedral void

ps

te

yS
ud
Page 15 of 36

St
(iii)

Tetrahedral void

Octahedral This type of site is formed at the centre of six sphere. The void formed by
two equilateral triangles with apices in opposite direction is called octahedral site or
octahedral hole. For octahedral void

rvoid
0.414
rsphere

Octahedral void

www.StudySteps.in

SOLID STATE

LIMITING RATIO
TRIGONAL

LIMITING RATIO
TETRAHEDRAL

LIMITING RATIO
OCTAHEDRAL

Co-ordination no. 3

Co-ordination no. 4

Co-ordination no. 6

AEC = 120
AD = ra
AE = ra + rc
BAD = 60 ( ABC is
DAE = 30 equilitarial)

ABD = 54 44

AD
= cos 30
AE

AD
= sin 5444
AB

ra
ra rc = 0.866

ra
ra rc = 0.8164

rc
1
ra + 1 = 0.866

rc
1
ra + 1 = 0.864

ud

yS

te

ps

D = sin 5444
sin A B
In ABD

rc
ra + 1 = 1.155

(iv)

St

ra
ra rc = 0.7071
rc
1
ra + 1 = 0.7071

rc
ra = 0.414

rc
ra = 0.225

AD
= cos 45
AB

rc
ra + 1 = 1.414

rc
ra + 1 = 1.225

rc
ra = 0.155

D = cos 45
cos B A
In ABD

.in

1
tetrahedral angle
2

E = cos 30
cos D A
In AED

ABC = 90
AD = ra
AB = ra + rc
BAD = 45

ABC = 10928
AD = ra
AB = ra + rc

cubical
void
: The vacant space
(void) formed by touching eight spheres.

+
Cs

rvoid
0.732
rsphere

Cl

(b)

packing
(array) is made
Note : If a close
upcellof n number of atoms or ions then it has n no. of
One unit
(a)
octahedral voids and 2n no. of tetrahedral voids.

Page 16 of 36

www.StudySteps.in

SOLID STATE

Illustration 8: In a cubic lattice, the closed packed structure of mixed oxides of the lattice
is made up of oxide ion; one eight of the tetrahedral voids are occupied by
divalent ions (A2+) while one half of the octahedral voids are occupied by
trivalent ions (B3+). What is the formula of the oxides?
Solution:

Let there be n no. of O2 in the crystal.

Octahedra voids = n
Tetrahedral voids = 2n
1
n
1
n
A2+ ions =
2n = ,
B3+ ion = n =
8
4
2
2
n
n
A2+ : B3+ : O2 =
:
: n
= 1 : 2 : 4
4
2
formula is AB2O4.

11. Radius ratio rules

In ionic crystals, the coordination numbers as well as the geometrical shapes of the crystals depend
mainly on the relative sizes of the ions. The ration of the radii of the positive and negative ions is
called radius ratio.

ps

.in

rc
Radius of postive ion (cation)
Radius ratio =
=
Radius of negative ion (anion)
ra

ra
radius ratio
rc

St

< 0.155
0.155 0.225
0.225 0.414
0.414-0.732
0.414-0.732
0.732 - 0.999

ud

Example

Co-ord. No.

Shape

yS

Limiting

te

Common coordination numbers are 3, 4, 6 and 8.

2
3
4
4
6
8

Linear
Trigonal planar
Tetrahedral
square planar
octahedral
B.C.C.

BeF2
B2 O 3
ZnS
PtCl42
NaCl
CsCl

12. Structure of ionic compounds

Simple ionic compounds are of the type AB or AB2 where A and B represent the positively and
negatively charged ions respectively. (In any solid of the type A xBy, the ratio of coordination
number of A to B would be y :x.

(i)

Page 17 of 36

Structures of Type AB:

Ionic compounds of the type AB means compounds having the positively and negatively
charged ions in the ratio 1:1. These compounds can have following three type of structures.
1.
Rock salt (NaCl) type
2.
Cesium chloride (CsCl) type
3.
Zinc blende (ZnS) type

www.StudySteps.in

SOLID STATE

1.

Rock salt structure (NaCl) :

(a)

(b)
(c)

Cl is forming a FCC unit cell in which Na+ is in the octahedral voids. The co-ordination
number of Na+ is 6 and that of Cl would also be 6.
rNa

Ratio of ionic radii = r 0.525

Cl

1
No. of sodium ions
= 12 (At edge centre) + 1 (At body centre) 1 = 4
4
No. of chloride ions
1
1
+ 6 (At face centres) = 4 (Thus formula is Na4Cl4 i.e. NaCl)
8
2
Most of the halides of alkali metals and oxides of alkaline-earth metal have this type of
structure. e.g. NaI, KCl, RbI and RbF. FeO also has rock-salt structure in which oxide
ions are arranged in ccp and Fe2+ ions occupy octahedral voids.

= 8 (At corners)
(d)

.in

Na+

yS

te

ps

Cl

Sodium chloride structure

Page 18 of 36

(a)

ud

Caesium chloride structure (CsCl)

CsCl has body-centered cubic (bcc) arrangement. This structure has 8 : 8 coordination, i.e., each Cs+ ion is touching eight Cl ions and each Cl ions in touching
eight Cs+ ions. (bcc)

St

2.

(b)

rCs
0.93 .
rCl

(a)

Cs+

Cl

(b)
One unit cell

1
= 1
8
No. of Cs+ ions = 1 (At the body centre) 1 = 1
No. of CsCl unit per unit cell = 1

(c)

No. of Cl ions = 8 (At corners)

(d)

Compounds having this type of structure are CsBr, CsI, TlCl, and TlBr.

www.StudySteps.in

SOLID STATE

3.

Zinc blende structure or sphalarite structure (ZnS)

(a)
(b)

(c)

Sulphite ions are face centered and zinc is present in alternate tetrahedral voids.
rZn 2
0.40
rS2

In unit cell no. of S2 ions

1
1
+ 6 at face centres = 4
8
2
(Formula is Zn4S4, i.e. ZnS)

.in

= 8 at corners

(ii)

te

Ionic solids having zinc blende structure are CuCl, CuBr, CuI & AgI

yS

(d)

ps

No. of Zn2+ ions = 4 (within the body) 1 = 4

No. of ZnS units per unit cell = 4

Structure of Ionic Compounds of the Type AB2:

Page 19 of 36

Fluorite structure (CaF2)

(a)
The cations are arranged in cubic close packing (ccp) while the anion occupy all the tetrahedral
voids. Calcium fluoride has 8 : 4 co-ordination. (ccp)
(b)
In unit cell no. of calcium ions

St

4.

ud

These are the ionic compounds having cations and anions in the ratio 1 : 2.

1
1
+ 6 at face centres = 4
8
2
No. of fluoride ions = 4 (within the body) 1 = 4
No. of CaF2 units per unit cell = 4
Compounds having fluorite structure are SrF2, BaCl2, BaF2, PbF2 and CdF2.

= 8 at corners

(c)

Ca2+
F

Structure of calcium fluoride

www.StudySteps.in

SOLID STATE

(iii) Structure of Ionic Compounds of the Type A2B:

5.

Antifluorite structure.
In antifluorite structure e.g., (Na2O)
(a)
The anions are arranged in cubic close packing (ccp) while the cations occupy all
the tetrahedral voids.
(b)
Na2O has 4 : 8 co-ordination
(c)
Compounds having antifluorite structures are : Li2O, K2O, Rb2O and Rb2S

O2

.in

Na+

(iv) Some special structures

WURTZITE structure
(a)
Sulphide ions have hcp arrangement and zinc ions occupy tetrahedral voids.
(b)
Structure has 4 : 4 coordination

S2
Zn2+

St

ud

yS

te

ps

6.

Unit cell representation

of Wurtzite structure

7.

Page 20 of 36

Spinal structure
(a)
A spinel is an important class of oxide consisting of two types of metal ions with
the oxide ions.
(b)
General formula of compound is AB2O4
e.g., MgAl2O4, ZnFe2O4
(c)
Oxide ions are arranged in ccp arrangement. Divalent cations are in tetrahedral sites
and trivalent ions are in octahedral sites.
(d)
Spinel type structures are important magnetic material used in telephones or memory
loops in computers.

www.StudySteps.in

Page 21 of 36

www.StudySteps.in

0.414 0.736 0.732 0.999

r+ / r

6 each

NaCl, MgO

Example

co-ord-no.

A4B4

formula

12

4:4

Ratio A : B

Neighbrous

ocatahedral
void-cation

Void

8 each

CsCl

AB

1:1

BCC-anions

BCC-cations

FCC-anions

Type

CsCl (BCC)

Rock-salt

Property

St

12

0.414 0.736

Fe2O3, Al2O3

A2B3

2:3

octahedral
void-cation

ps

12

cation-4anion-8

.in

0.225 0.414

ZnS

A4B4 , AB

4:4

tetrahedral
void-cations

CCP-anions

Zinc blende

Rb2O BeO,

A2B

0.225 0.414

Li2O,

te

A8 : B4

8 :4

tetrahedral
void-cations

CCP-anions

Antifluorite

yS

ud

HCP-anions

Corundum

CaF2

cations-8 anions-4

0.225 0.414

UO2 ,

A1/8 B1/4 , AB2

1/8 : 1/4

tetrahedral
holes-anions

CCP-cations

Fluorite

0.225 0.414

ZnAl2O4 , ZnFe2O4

A1B2O4

A+2 : B+3 : O2 1 : 2 : 4

tetrahedral void B+3

the tetrahedral voidA+2

CCP-oxides

Spinel

SOLID STATE

SOLID STATE

2. Daily Practice Problem Sheet

A solid A+ B has NaCl type close packed structure. If the anion has a radius of 250 pm. What
should be the ideal radius of the cation ? Can a cation C+ having a radius of 180 pm be slipped into
the tetrahedral site of the crystal A+B ? Give reason for your answer.

2.

A solid AB has NaCl structure. If the radius of the cation A is 100 pm, what is the radius of the
anion B?

3.

A solid AB has NaCl structure. If the radius of cation A+ is 170 pm, calculate the maximum
possible radius of the anion B.

4.

A solid A+B has NaCl type close packed structure. If the anion has a radius of 241.5 pm, what
should be the minimum radius of the cation ? Can a cation C+ having radius of 50 pm be fitted
into the tetrahedral hole of the crystal A+B ?

5.

In a crystalline solid, anions B are arranged in a cubic close packing. Cations A are equally
distributed between octahedral and tetrahedral voids. If all the octahedral voids are occupied,
what is the formula of the solid ?

6.

In corundum, oxide ions are arranged in hexagonal close packing and aluminium ions occupy
twothird of the octahedral voids. What is the formula of corundum ?

7.

The two ions A+ and B have radii 88 and 200 pm respectively. In the close packed crystal of
compound AB, predict the coordination number of A+.

8.

If the radius of Mg2+ ion, Cs+ ion , O2 ion , S2 ion and Cl ion are 0.65 , 1.69 , 1.40 ,
1.84 and 1.81 respectively , calculate the coordination numbers of the cations in the crystals
of MgS, MgO and CsCl.

9.

Predict the structure of MgO crystal and coordination number of its cation in which cation and
anion radii are equal to 65 pm and 140 pm respectively.

10.

In the compound AX, the radius of A+ ion is 95 pm and that of X ion is 181 pm. Predict the crystal
structure of AX and write the coordination number of each of the ions.

11.

Predict the close packed structure of an ionic compound A+B in which the radius of the
cation = 148 pm and radius of anion = 195 pm. What is the coordination number of the cation ?

12.

The compound CuCl has ZnS (cubic) structure. Its density is 3.4 g/cm3. What is the length of the
edge of the unit cell ? (At masses Cu = 63.5, Cl = 35.5)

13.

KF has NaCl structure . What is the distance between K+ and F in the KF , if the density is
2.48 g cm3?

14.

The density of KBr is 2.75 g cm3. the length of the edge of the unit cell is 654 pm. Show that
KBr has a face centered cubic structure.

15.

A crystal of Lead (II) sulphide has NaCl structure. In this crystal the shortest distance between the
Pb2+ ion and S2 ion is 297 pm. What is the length of the edge of the unit cell in lead sulphide ? Also
calculate the unit cell volume.

16.

The edge length of NaCl unit cell is 564 pm. What is the density of NaCl in g/cm3 ?
[ Na = 6.02 1023, Na = 23.0 and Cl = 35.5 ]

Page 22 of 36

St

ud

yS

te

ps

.in

1.

www.StudySteps.in

SOLID STATE

17.

A compound AB crystallises in bcc lattice with the unit cell edge length of 380 pm. Calculate
(i)
the distance between oppositely charged ions in the lattice.
(ii)
radius of B if the radius of A+ is 190 pm.

18.

Write the coordination number of each ion in the following crystals

(i) NaCl
(ii) CsCl
(iii) ZnS
(iv) CaF2
(v) Na2O

19.

The density of KBr is 2.75 c/cm3. The length of the unit cell is 654 pm . Atomic mass of
K = 39, Br = 80. Then what is the true about the predicted nature of the solid ?
(A)
unit cell is fcc
(B)
Z=4
(C)
there are four constituents/unit cells
(D)
there are 8 ions at corners and 6 at the centres of the faces

20.

What is true about BCC unit cell ?

(A)
No. of atoms in the unit cell is 2
(B)
In addition to an atom at the centred of the body of the unit cell there are 8 atoms at 8
different corner
(C)

(D)

none of these

What is true about simple cubic type of unit cells ?

(A)
Eight constituents are at different corners of the cube

(B)

Z=1

contribution by one corner is 1

8 th of an atom

(D)

none of these

ps

(C)

.in

21.

1 atom at a corner of the unit cell

8

A solid has a structure in which W atoms are located at the corners of a cubic lattice, O atoms at the
centre of the edges and Na atom at centre of the cube. The formula for the compound is
(A) NaWO2
(B) NaWO3
(C) Na2WO3
(D) NaWO4

23.

The number of octahedral sites per sphere in fcc structure is

(A) 8
(B) 4
(C) 2

Page 23 of 36

(D) 1

St

ud

yS

te

22.

13. Imperfections or defects in solids

At absolute zero, crystals tend to have a perfectly ordered arrangement. This arrangement
corresponds to state of lowest energy. As the temperature increases, the crystals start
deviating from the perfectly ordered arrangement. Any deviation from the perfectly ordered
arrangement constitutes a defect or imperfection. These defects are sometimes called
thermodynamic defects because the number of these defects depends on the temperature.
Crystals may also possess addition defects due to the presence of impurities. Many
properties of crystalline solids such as electrical conductivity and mechanical strength can
be explained in terms of imperfections. Imperfections not only modify the properties of solids
but also give rise to new properties.
The defects which arises due to the irregularity in the arrangement of atoms or ions are
called atomic imperfections. The atomic defects caused by missing or misplaced ions are
called point defects. If the deviations from periodicity extend over microscopic regions of
the crystal they are called lattice imperfections. Lattice imperfections may extend along lines
(line defects) or planes (plane defects). Line defects are also called dislocations. Various
types are as follows :

www.StudySteps.in

SOLID STATE

Page 24 of 36

Stoichiometric point defects

te

ps

.in

The compounds in which the numbers of positive and negative ions are exactly in the ratios
indicated by their chemical formulae are called stoichiometric compounds. The defects that
do not disturb the stoichiometry (the ratio of numbers of positive and negative ions) are
called stoichiometric defects. These are of following types
(a)
Schottky Defects : This type of defect is created when one positive ion and one
negative ion are missing from their respective positions leaving behind a pair of holes.
Schottky defects are more common in ionic compounds with high co-ordination number,
and where the sizes of positive and negative ions are almost equal. For example, NaCl,
KCl, CsCl and KBr.
The presence of large number of Schottky defects in crystal results in significant decrease
in its density.

Interstitial Defects This type of defect is caused due to the presence of ions in the
normally vacant interstitial sites in the crystal. The ions occupying the interstitial sites are
called interstitials. The formation of interstitial defects is determined by the size of the
interstitial ion.

(c)

Frenkel Defect This type of defect is created when an ion leaves its correct lattice site and
occupies an interstitial site. Frenkel defects are common in ionic compounds which have low coordination number and in which there is large difference in size between positive and negative
ions. For example, ZnS, AgCl, AgBr and AgI.

ud

yS

(b)

St

(i)

www.StudySteps.in

SOLID STATE

Consequences of stoichiometric defects

(i)
(ii)
(iii)

(ii)

The presence of those defects in the crystal makes them good electrical conductors.
The presence of holes in the Schottky type defects lowers their density.
The presence of ions in interstitial sites in the Frenkel defects increases the dielectric constant
of the crystals.

Non Stoichiometric defects

There are may compounds in which the ratio of positive and negative ions present in the compound
differs from that required by ideal chemical formula of the compound. Such compounds are called
non-stoichiometric or Bertholloide compounds. In these compounds composition may vary over a
wide range. The defects which disturb the stoichiometry of the compound are called non-stoichiometric
defects. These defects are either due to the presence of excess metal ions or excess non-metal ions.
Metal excess Defects due to Anion Vacancies.
A compound may have excess metal ion if a negative ion is absent from its lattice site, leaving a
hole, which is occupied by electron to maintain electrical neutrality. This type of defects are found
in crystals which are likely to possess Schottky defects. Anion vacancies in alkali halides are produced
by heating the alkali halide crystals in an atmosphere of alkali metal vapours. Under these conditions
alkali metal atoms deposit on the surface of the alkali halide crystal, halide ions move to the surface
and combine with metal ions. The electrons released during conversion of metal atoms into ions
diffuse into the crystal and occupy the sites vacated by anions. The holes occupied by electrons
are called F-centres (or colour centres) and are responsible for the colour of the compound and
many other interesting properties. For example, the excess sodium in NaCl makes the crystal appear
yellow, excess potassium in KCl makes it violet and excess lithium in LiCl makes it pink. Greater the
number of F-centres, greater is the intensity of colour. Solids containing F-centres are paramagnetic
because the electrons occupying the holes are unpaired.

ud

M+

yS

te

ps

.in

(a)

St

M+

M+

M+

M+

M+

M+

M+

M+

M+

M+
X

M+

M+

e
X

(a)

(b)

Page 25 of 36

M+

M+

(a)
Metal
excess
defect
Metal excess defect due
to anion vacancies
due to anion vacancies

M+

(b)
Metal excess defect due
to interstitial cation

Metal Excess Defects due to Interstitial Cations

Metal
non-stoichiometric
Another way in which metal excess defects may occur
is, excess
if an extra
positive ion is defects
present
in an interstitial site. Electrical neutrality is maintained by the presence of an electron in the
interstitial site. This type of defects are exhibited by the crystals which are likely to exhibit
Frenkel defects. For example, when ZnO is heated, it loses oxygen reversibly. The excess
metal is accommodated in interstitial sites, with electrons trapped in the neighbourhood. The
yellow colour and the electrical conductivity of the non-stoichiometric ZnO is due to these
trapped electrons.

www.StudySteps.in

M+

SOLID STATE

M+

M+

M+

M+

M+

M+

M+

M+

M+

M+
X

M+

M+

M+

e
M+

(a)
Metal excess defect
due to anion vacancies

M+

M+

(b)

(b)

Metal excess
defect
Metal
excess due
defectto
dueinterstitial cation
to interstitial cation

M+

M+

M+

Na+

Cl

Na+

Cl

Na+

Cl

Na+

Cl

Cl

Na+

Na+

Cl

M+

Cl

Sr2+

M+

Na+

Cl

M+

Cl

Na+

M2+

yS

M+

M+

.in

Metal Deficiency due to cations vacancies.

Metal excess non-stoichiometric
The non-stoichiometric
compounds maydefects
have metal deficiency due to the absence of a metal ion
from its lattice site. The charge is balanced by an adjacent ion having higher positive charge. This
type of defects are generally shown by compounds of transition metals. It may be mentioned here
that metal excess compounds and metal deficient compounds both act as semi-conductors. Metal
excess compounds conduct electricity through normal electron conduction mechanism and are
therefore n-type semiconductors. Metal deficient compounds conduct electricity through positive
hole conduction mechanism and are therefore p-type semiconductors.

ps

(c)

M+

te

Metal deficiency due

Cl

Introduction of cation vacancy in NaCl

ud

to cation vacancy
Metal deficiency
due to cation vacancy by substitution of Na+ with Sr2+ ion.

St

(iii) Point Defects due to the Presence of Foreign Atoms (Impurity defect)
Foreign atoms can occupy interstitial sites in a crystal example non-stoichiometric cuprous oxide
(Cu2O) can be prepared in laboratory. In this oxide copper to oxygen ratio is slightly less than 2 : 1.
This is due to the reason that some of the positions which were to be occupied by Cu+ ions are
vacant whereas some positions are occupied by Cu2+ ions. Defects in the ionic solids may be
introduced by adding impurity ions. If the impurity ions have different valence state than that of the
host ions, vacancies are created. For example addition of SrCl2 to NaCl yields solids solution where
the divalent cation occupies Na+ sites and produces cation vacancies equal to the number of the
divalent ions occupying substitutional sites.
Similarly, AgCl crystals can be doped with CdCl2 to produce impurity defects in a likewise manner.
M+

M+

M+

Na+

Cl

Na+

Cl

Na +

M+

Cl

Sr2+

Cl

Na+

Cl

Cl

Na +

Na +

Cl

M+

M 2+

M+

Na+

Cl

M+

M+

Cl

Na +

Metal deficiency due

to cation vacancy

Page 26 of 36

Cl

Introduction of cation vacancy in NaCl

by substitution of Na+ with Sr 2+ ion.

www.StudySteps.in

SOLID STATE

14. Properties of Solids

(i)

Electrical Properties :
Solids can be broadly classified into three types, on the basis of electrical conductivity.
(a) Metals (conductors)
(b) Insulators
(c) Semiconductors
Electrical conductivity of metals is very high and is of the order of 106 108 ohm1 cm1 whereas for
insulators, it is of the order of 1012 ohm1 cm1. Semiconductors have intermediate conductivity in
the range of 102 109 ohm1 cm1. Electrical conductivity of solids may arise through the motion of
electrons and holes (positive) or through the motion of ions. The conduction through electrons is
called ntype conduction and through (positive) holes is called ptype conduction. Pure ionic solids
where conduction can take place only through movement of ions are insulators. The presence of
defects in the crystal structure increases their conductivity.
The conductivity of semiconductors and insulators is mainly due to the presence of interstitial
electrons and positive holes in the solids due to imperfections. The conductivity of semiconductors
and insulators increases with increase in temperature while that of metals decrease.

(ii) Magnetic Properties

.in

Diamagnetic Materials : Those materials which are weakly repelled by the magnetic field are

called diamagnetic materials. e.g. Cu+, TiO2, NaCl and benzene. They do not have unpaired electrons.

ps

Paramagnetic Materials : The materials which are weakly attracted by magnetic field are called

te

paramagnetic materials. These materials have permanent magnetic dipoles due to presence of atoms,
ions or molecules with unpaired electron. e.g. O2, Cu2+, Fe2+ etc. But these materials lose their
magnetism in the absence of magnetic field.

yS

Ferromagnetic Materials : The materials which show permanent magnetism even in the absence

ud

of magnetic field are called ferromagnetic materials. These materials are strongly attracted by the
magnetic field. e.g. Fe, Co, Ni and CrO2. Ferromagnetism arises due to spontaneous alignment of
magnetic moments of ions or atoms in the same direction.

St

Alignment of magnetic moments in opposite directions in a compensatory manner and resulting in

zero magnetic moment gives rise to antiferromagnetism
;
ferromagnetism

Anti ferromagnetism

Ferrimagnetism

for example , MnO , Mn2O3 and MnO2 .

Alignment of magnetic moments in opposite directions resulting in a net magnetic moment due to
unequal number of parallel and antiparallel magnetic dipoles give rise to ferrimagnetism e.g. Fe3O4.
Ferromagnetic and ferrimagnetic substances change into paramagnetic substances at higher
temperature due to randomisation of spins. Fe3O4, is ferrimagnetic at room temperature and becomes
paramagnetic at 850 K.

(iii)

Page 27 of 36

Dielectric Properties
The electrons in insulators are closely bound to the individual atoms or ions and thus they do not
generally migrate under the applied electric field. However, due to shift in charges, dipoles are
created which results in polarisation. The alignment of these dipoles in different ways i.e.
compensatory way (zero dipole) or noncompensatory way (net dipole) impart certain characteristic
properties to solids.
If the dipoles align in such a way that there is net dipole moment in the crystals, these crystals are
said to exhibit piezoelectricity or piezoelectric effect i.e. when such crystals are subjected to pressure

www.StudySteps.in

SOLID STATE

or mechanical stress, electricity is produced. Conversely, if an electric field is applied to such a

crystal, the crystal gets deformed due to generation of mechanical strain. This is called inverse
piezoelectric effect.
Some crystals which on heating, acquire electric charges on opposite faces, are said to exhibit
pyroelectric effect.
The solids, in which dipoles are spontaneously aligned in a particular direction, even in the absence
of electric field are called ferroelectric substances and the phenomenon is known as ferroelectricity.
If the alternate dipoles are in opposite direction, then the net dipole moment will be zero and the
crystal is called antiferroelectric.
Ferroelectric solids Barium titanate (BaTiO3), sodium potassium tartrate (Rochelle salt) and
potassium hydrogen phosphate (KH2PO4). Antiferroelectric Lead Zirconate (PbZrO3).

yS

15. Amorphous Solids

te

ps

.in

Super Conducting Materials : The material which offer no resistance to the passage of electricity
is called superconductor or super conducting material. In this state, the materials become diamagnetic
and are repelled by the magnets. Most of the metals become super conducting at low temperatures
(2 5K). Highest temperature at which super conductivity is known is 23K in alloys of niobium
(e.g. Nb3Ge). Many complex metal oxides have been found to possess superconductivity at
somewhat higher temperatures.
Material
Temperature
Nb3Ge
23 K
Bi2Ca2Sr2Cu3O10
105 K
Ti2Ca2Ba2Cu3O10
125 K

ud

Solids, which do not have an ordered arrangement of their constituent atoms or ions but have a
disordered or random arrangement are called amorphous solids e.g. ordinary glass.

St

Properties of Amorphous Solids

(i)

Short range order : Amorphous solids have a short range order like liquids i.e. the order does not
extend to large three dimensional network.

(ii)

No sharp melting point : These solids melt over a range of temperature. This property is used in

moulding and giving desired shape to the articles of glass.

(iii)

Conversion into crystalline form on heating : Amorphous solids, when heated and cooled

slowly, become crystalline at certain temperature.

Use of Amorphous Solids

(i)

Amorphous solids, in the form of inorganic glasses, find application in construction, houseware,
laboratory ware etc.

(ii)

These solids are used in making tyres, shoe soles etc., in the form of rubber.

(iii)

Large number of plastics are being used in articles of daily use.

(iv)

These are used in photo voltaic cells (for converting sunlight into electricity).

Page 28 of 36

www.StudySteps.in

SOLID STATE

16. Silicates
Silicates are the compounds in which anions present are either discrete SiO44 tetrahedra or a
number of such units joined together through corners . The tetrahedral structure of SiO44 is
shown as
O

Si

Si

(SiO44)

Types of Silicates : Silicates can be classified into different types depending upon the corners (0 , 1,
2 , 3 , or 4) of the SiO 44 tetrahedron shared with other tetrahedra . If some of silicon atoms in
SiO 44 are replaced by aluminium, we get aluminosilicates.

Orthosilicate : Simple silicates containing discrete SiO 44 tetrahedra e.g. ZrSiO4.

2.

Pyrosilicate : Two SiO 44 tetrahedra sharing one corner..

.in

1.

ps

or

te

Si

Si

3.

yS

pyrosilicate
(Si2O7)6 (island structure)

Cyclic or ring silicate : Two oxygen atoms per tetrahedron sharing to form closed rings with

ud

general formula (SiO32)n or (SiO3)n2n e.g. Ca3Si3O9.

St

(Si3O9)6

4.

Page 29 of 36

(Si6O18)12

Chain silicates : Two oxygen atoms per tetrahedron sharing to form long linear single strand

chain of general formula (SiO3)n2n e.g. CaMg(SiO3)2.

(SiO32)n

www.StudySteps.in

SOLID STATE

5.

Sheet Silicates : Sharing of three corners (i.e. three oxygen of each tetrahedron) resulting in an

infinite two dimensional sheet structure of formula (Si2O5)n2n or (Si2O52)n

e.g. clay contains these anions.

6.

(Si2O5 )n

Three dimensional silicates : If all the four corners are shared with other tetrahedra forming

SUBJECTIVE

te

ud

Problem 1 :

PROBLEMS

yS

SOLVED

ps

.in

three dimensional network.

St

A compound formed by elements A and B crystallizes in cubic structure where A atoms are
at the corners of a cube and B atoms are at the face center. What is the formula of the
compound?
1
Solution :
A atom are eight corners of the cube. Hence no. of A atoms = 8 = 1
8
B atoms are at the face centre of six faces. Hence no. of B atoms

6
3
2

The formula is AB3

Problem 2 :

NH4Cl crystallizes in a body centred cubic lattice, with a unit cell distance of 387 pm.
Calculate :
(a)
the distance between the appositively charged ions in the lattice,
and
+

(b)
the radius of the NH4 ion if the radius of the Cl ion is 181pm.
Solution :

Page 30 of 36

(a)

In a body centred cubic lattice, oppositely charged ions touch each other along the cross
diagonal of the cube. So, we can write,
2r+ + 2r = 3a

(b)

r+ + r =

3
3
a=
(387 pm) = 335.15 pm
2
2

Now, since r = 181 pm

We have, r+= (335.15 181) pm = 154.15 pm

www.StudySteps.in

SOLID STATE

Problem 3 :

Iron occurs as BCC as well as FCC unit cell. If the effective radius of an atom of iron is
124 pm, compute the density of iron in both these structures.
Solution :
In a body centred unit cell, atoms touch each other along the cross diagonal.
Hence, 4r = 3a

4
4
r =
(124 pm) = 286.4 pm
3
3

for BCC lattice, Z = 2, Hence

=

ZM
2 55.8
=
= 7.887 106 gm3 = 7.886 g cm3
3
a NA
(286.4 1012 )3 6.023 1023

In a face centred unit cell, atoms touch each other along the face diagonals.
Hence, 4r = 2a
a=

4
4
r=
(124 pm) = 350.7 pm
2
2

For FCC lattice, Z = 4, hence,

4
55.8

= 8.89 106g m3 = 8.89 g cm3

12
(350.7 10 ) 6.023 1023

.in

ps

Problem 5 :

Length of the edge of unit cell = 408 pm,

Volume of unit cell = (408 pm)3 = 67.92 1024 cm3
Mass of unit cell = Density Volume
= 10.6g cm3 67.92 1024 cm3 = 7.20 1024g
Mass of unit cell = No. of atoms in unit cell Mass of each atom

ud

yS

Solution :

te

Silver has a cubic unit cell with a cell edge of 408 pm. Its density is 10.6 g cm 3. How many
atoms of silver are there in the unit cell? What is the structure of silver?

St

Now, mass of each atom =

108
Atomic mass
=
= 1.79 1022g
6.023 1023
Avogadro number

Let the unit cell contains n atoms, so that

Mass of unit cell = n 1.79 1022 = 7.20 1022
n=

7.20 1022
= 4.02,
1.79 1022

Number of atoms present in a unit cell = 4

Since the unit cell contains 4 atoms per unit cell, silver has face centred cubic lattice.
Problem 6 :

If NaCl is doped with 10 3 mol percent of SrCl2, what is the concentration of cation
vacancy?
Solution:
Concentration of cation vacancies = concentration of Sr2+ ion in the crystal

Page 31 of 36

Number of cationic vacancies per mol =

103 6.023 1023

100

= 6.023 1018 vacancies per mole

www.StudySteps.in

SOLID STATE

Problem 7 :

A solid A+ B has NaCl type close packed structure. If the anion has a radius of 250 pm,
what should be the ideal radius of the cation? Can a cation C+ having a radius of 180 pm
be slipped into the tetrahedral site of the crystal A + B? Give reason for your answer.
Solution :

As A+ B has NaCl structure, A+ ions will be present in the octahedral voids. Ideal radius of the
cation will be equal to the radius of the octahedral void because in that case it will touch the anions
and the arrangement will be close packed. Hence
Radius of the octahedral void = rA = 0.414 rB = 0.414 250 = 103.4 pm
Radius of the tetrahedral site = 0.225 rB = 0.225 250 pm = 56.25 pm
As the radius of the cation C+ (180 pm) is larger than the size of the tetrahedral site, it cannot be
slipped into it.
Problem 8 :

Calculate the void space in a primitive unit cell and also the fraction of the total volume
occupied.
r
r
Solution :
Volume of the cube = a3 = (2r)3 = 8r3

a = 2r

= 0.52
6

Void fraction = 1 0.52 = 0.48

Void space = 48%

yS

te

ps

.in

4 3
3 r
Volume of one atom

Packing fraction =
=
8r 3
Volume of the cube

Problem 9 :

Page 32 of 36

4
3

3
Volume of one atom of Ar r

St

Solution :

ud

The density of solid argon is 1.65 g/mL at 233C. If the argon atom is assumed to be
sphere of radius 1.54 108 cm, what percentage of solid argon is apparently empty space?
(At. wt. of Ar = 40).

Also, No. of atoms in 1.65g

1.65
6.023 1023
40
4
3

3
Total volume of all atoms of Ar in solid state r

4 22
1.65
(1.54 10 8 )3
6.023 1023
3 7
40

Volume of solid argon 1 cm3

% empty space

[1 0.380]
100 = 62%
1

www.StudySteps.in

1.65
6.023 1023
40

0.380 cm 3

SOLID STATE

Problem 10 :

An element crystallizes as body centred cubic lattice. Its density is 7.12 g cm 3 and the
length of the side of the unit cell is 2.88 . Calculate the number of atoms present is 288
g of the element.
Solution :

Volume of unit cell a 3 (2.88)3 (2.88 10 8 cm)3

Volume of 288 g of the element

23.887 1024 cm3

Mass
288 g

40.449 cm3
Density 7.12 g cm 3

Number of unit cells in the given volume of the element

volume of the element

40.449

1.693 1024
volume of the unit cell 23.887 10 24

Each unit cell of b.c.c. lattice contains 2 atoms

Number of atoms in 288 g of element
= No. of unit cells no. of atoms per unit cell 1.693 1024 2 3.386 1024

Problem 11 :

.in

Calculate the value of Avogadro number from the internuclear distance of adjacent ions
in NaCl, 0.282 nm and the density of solid NaCl is 2.17 103 kg/m3. A unit cell contains
4 NaCl formula units.

ps

Solution :

mass of 1 mole 58.5 10 3

2.7 10 5 m3
2.17 103
density

yS

Volume of 1 mole of NaCl

te

To calculate Avogadro number, that is, number of NaCl formula units per mol, let us assume 1
mole of NaCl.

ud

Volume of 1 unit cell a 3 (0.564 10 9 )3 1.79 10 28 m3

Number of unit cells per mol

2.7 10 5
1.51 1023
28
1.79 10

St

Since 1 unit cell of NaCl has 4 NaCl formula units,

Avogadro number (formula units per mol) 4 (1.51 1023 )
6.04 1023

Problem 12 :

An ionic solid A+ B crystallizes as a body centred cubic structure. The distance between
cation and anion in the lattice is 338 pm. Calculate the edge length of the unit cell.
Solution :

Page 33 of 36

In a body centred cubic unit cell, the distance between the cation and anion (r r ) is related to the
edge length (a) by
r r 3

a
,
2

2
(r r ) ,
3

It is given that (r r ) 338 pm

2
676
338 pm
390.3 pm
1.732
3

www.StudySteps.in

SOLID STATE

OBJECTIVE
Problem 1 :

A compound XY crystallizes in BCC lattice with unit celledge length of 480 pm, if the
radius of Y is 225 pm, then the radius of X+ is:
(A) 190.70 pm
(B) 225 pm
(C) 127.5 pm
(D) None
Solution :
(A)
For BCC lattice 2 (r+ + r) = 3a or r+ = ( 3 480 ) 225 = 190.7 pm
Problem 2 :

If the edgelength of the unit cell of sodium chloride is 600 pm, and the ionic radius of
Cl ion is 190 pm, then the ionic radius of Na+ ion is
(A) 310 pm
(B) 110 pm
(C) 220 pm
(D) None
Solution :
(B)
rNa rCl

600
= 300
2

rNa = 300 190 = 110 pm

Problem 3 :

yS

te

ps

.in

In a cubic packed structure of mixed oxides, the lattice is made up of oxide ions, one fifth
of tetrahedral voids are occupied by divalent (X++) ions, while onehalf of the octahedral
voids are occupied by trivalent ions (Y3+), then the formula of the oxide is:
(A) XY2O4
(B) X2YO4
(C) X4Y5O10
(D) X5Y4O10
Solution :
(C)
In CCP anions occupy primitives of the cube while cations occupied voids. In CCP there
are two tetrahedral voids and one octahedral holes.
For one oxygen atom there are two tetrahedral holes and one octahedral hole.
Since one fifth of the tetrahedral voids are occupied by divalent cations (X2+).

ud

number of divalent cations in tetrahedral voids = 2 15

Since half of the octahedral voids are occupied by trivalent cations (Y3+)

St

number of trivalent cations = 1 12

So the formula of the compound is X2/5Y1/2O or X4Y5O10
Problem 4 :

In a metal M having BCC arrangement edge length of the unit cell is 400 pm. The atomic
radius of the metal is:
(A) 100 pm
(B) 141 pm
(C) 173 pm
(D) 200 pm
Solution :
(C)
In a BCC lattice, an atom at the centre of the cube is in contact with atoms at the corners.
Thus diagonal of the cube is
a

3 = 4 atomic radius r = 400 3 = 173 pm

4

Problem 5 :

The ratio of closed packed atoms to tetrahedral holes in cubic close packing is
(A) 1:1
(B) 1:2
(C) 1:3
(D) 2:1
Solution :
(B)
Every constituent has two tetrahedral voids

Page 34 of 36

In CCP lattice no. of atoms = 8 18 + 6 12 = 4

tetrahedral voids = 4 2 = 8

Thus, ratio = 4:8 i.e. 1:2

www.StudySteps.in

SOLID STATE

Problem 6 :

In a face centred cubic arrangement of A and B atoms whose A atoms are at the corner of
the unit cell and B atoms at the face centres. One of the B atoms is missing from one of the
face in unit cell. The simplest formula of compound is :
(A) AB3
(B) A8B5
(C) A2B5
(D) AB2/5
Solution : (C)
A face centred atom contributes 1/2 atom in one unit cell. Therefore, missing one B atoms
or A2B5.
2/5
g

Problem 7 :

For the structure given below, the site marked as S is:

(A) Cubic void
(B) Tetrahedral void
(C) Octahedral void
(D) None of these
Solution : (C)
Cubic voids are octahedral or tetrahedral, but for face centred cubic (FCC) lattice we have
octahedral void.

.in

ps

Problem 8 :

ud

yS

te

An element occupying a BCC structure has 12.08 1023 unit cells. The total number of
atoms of the element in the cells will be
(A) 24.16 1023
(B) 36.18 1023
23
(C) 6.04 10
(D) 12.08 1023
Solution : (A)
BCC unit cell contains 2 atoms
No. of atoms is 12.08 1023 unit cells = 2 12.08 1023 = 24.16 1023

St

Problem 9 :

The basic unit of all silicates is

(A) SiO2
(B) SiO42
Solution : (D)
SiO44 is the basic unit of all silicates

(C) SiO32

Problem 10 :

(D) SiO44

A binary solid (A+B) has a zinc blende structure with B ions constituting the lattice and
A+ ions occupying 25% tetrahedral holes. The formula of solid is:
(A) AB
(B) A2B
(C) AB2
(D) AB4

Solution :

Page 35 of 36

(C)
1
8

B ions in the unit cell = 8 6

1
=4
2

A+ ions occupy 25% of the tetrahedral holes =

Thus formula is A2B4 or AB2

www.StudySteps.in

8 25
=2
100

SOLID STATE

1.

Daily Practice Problem Sheet

1. [AB3]

2. [PQ]

3. [XY]

4. [XY]

6. [AB]

7. [438.5 pm]

8. [173.2 pm]

9. [1414 pm]

10. [6.23 g/cm3]

11. [24.17 1023 atoms]

12. [1.02 g/cm3]

13. [19.4 g/cm3, 143.9 pm]

14. [41.67 g cm-3]

15. [BCC]

16. [400 pm]

18. [6.02 1023]

19. [37.6]

2.

17. [96.0]

5. [9]

Daily Practice Problem Sheet

1. [103.4 pm, Cannot, 56.25 pm]

2. [241 pm]

3. [410.6 pm]

4. [100 pm, Yes]

5. [A2B]

6. [Al2O3]

7. [6]

8. [4, 6, 8]

9. [6, octahedral]

10. [6, octahedral]

11. [8, bodycentered cubic]

12. [578 pm]

13. [268.8 pm]

14. [N = 6.023 1023 mol1, At. mass ; K = 39, Br = 80]

15. [a = 5.94 108 cm, V = a3 = 2.096 1022 cm3]

16. [2.16 g cm3]

19. [(A) (B), (C) , (D)]

20. (A) (B), (C)

22. (B)

Page 36 of 36

St

ud

yS

te

ps

21. (A) (B), (C)

.in

17. [(i) 329 pm (ii) 458.9 pm]

www.StudySteps.in

23. (D)