READY-MADE EVASION TEST LAB

A STONESOFT INNOVATION

Users Guide

USING STONESOFT EVADER

Stonesoft Evader allows you to test the effectiveness of security devices in your network
environment against advanced evasion techniques.
The following sections are included:
Getting Started With Stonesoft Evader (page 2)
Installing the Evader Test Environment (page 3)
Evader Command Syntax (page 5)
Mongbat Command Syntax (page 10)
Supported Evasions (page 13)

Getting Started With Stonesoft Evader

An evasion is an attempt to disguise attacks in order to avoid detection and blocking by network
security systems. Evasions can be used on normal requests as well as on attacks. An attack
consists of a delivery mechanism (for example, a buffer overflow) and a malicious payload (for
example, code that is executed by the victim computer). The attack is considered successful if
the delivery mechanism succeeds in gaining access to the victim computer, regardless of
whether the security device detects or responds to the attack.
Evasion techniques can be divided into the following categories:
Defined in a specification and used according to the specification (example:
IPFragmentation).
Defined in a specification but never actually used according to the specification (example:
MSRPC BigEndian).
Defined in a specification for some other component, but not defined for the way it is used in
the evasion technique (example: MSRPC NDR Flags).
Forbidden by a specification, but accepted by the victim system (example: TCP overlap).
The well-known exploits available in Stonesoft Evader are used as a carrier for evasion testing
only.

Installation Environment
The installation environment consists of an attacker computer that runs the Stonesoft Evader
software and one or more victim computers. The examples in this document are based on the
following example installation. Your installation may vary according to your environment.
Illustration 1.1 Example Installation
Security Device(s)

1. Attacker computer
IPv4 Address: [Link]
Netmask: [Link] (25)
Attacker source IPv4 address range: [Link] - [Link]
2. Linux victim computer
IPv4 Address: [Link]
Netmask: [Link] (25)
The following credentials are used to log in to the Linux operating system on both computers:
User: root
Password: password

Using Stonesoft Evader

Installing the Evader Test Environment

Installation Files
The attacker computer and the Linux victim computer are distributed as one OVF Template. The
attacker computer includes the Evader software. The Linux victim computer includes the
following vulnerable software:

Apache HTTP Server version 2.0.64

MySQL 4.1.22
PHP 4.2.2
phpBB 2.0.10 (CVE-2004-1315)

System Requirements
The OVF Template can be deployed on the virtualization platform of your choice. You may need to
enable Promiscuous mode on the virtual switches to get your security device(s) to work
correctly.
If you want use a Windows XP victim computer as the target for testing evasions with the
conficker attack, you must install the operating system and configure the vulnerable services
according to the requirements below:
Windows XP (en-US) SP2 without patches
MSRPC Server Service configured to allow unauthenticated MSRPC binds (CVE-2008-4250)
Example IP Addresses for Windows Victim Computer:
IPv4 Address: [Link]
Netmask: [Link] (25)

Deploying the Attacker and Victim Virtual Machines in VMware

These instructions describe how to deploy OVF Template for the attacker and victim virtual
machines in VMware. For other virtualization platforms, consult your platform-specific
documentation.
To deploy the attacker and victim virtual machines in VMware
1. Start the vSphere Client and select the Resource Pool where you want to deploy the virtual
machine.
2. Select FileDeploy OVF Template. The Deploy OVF Template Wizard opens.
3. Select Import from file and Browse to the OVF File.
4. Click Next. The OVF Template Details open, showing the detailed information of the virtual
machine to be deployed.
5. Click Next.
6. Enter a Name for the virtual machine and click Next.
7. Map the networks defined in the OVF template to the networks in your inventory.
8. Click Next and check that the deployment settings are correct.

Installing the Evader Test Environment

9. Click Finish to deploy the virtual machine. When the deployment is finished, click Close to
close the status dialog.
Whats Next?
Repeat these steps to deploy the other virtual machine, then continue by Configuring
the Attacker Computer (page 4).

Configuring the Attacker Computer

To configure the attacker computer
1. Log in to the attacker virtual machine with the following credentials:
User: root
Password: password
2. Edit the following settings in the /etc/network/interfaces file according to your network
environment:
auto eth0
iface eth0 inet static
address [Link]
netmask [Link]
3. Enter the following command to restart networking and apply your network settings:
/etc/init.d/networking restart
Whats Next?
Continue by Configuring the Linux Victim Computer (page 4).

Configuring the Linux Victim Computer

To configure the Linux victim computer
1. Log in to the victim virtual machine with the following credentials:
User: root
Password: password
2. Edit the following settings in the /etc/network/interfaces file according to your network
environment:
auto eth0
iface eth0 inet static
address [Link]
netmask [Link]
3. Enter the following command to restart networking and apply your network settings:
/etc/init.d/networking restart
4. Enter the following command to start the vulnerable services:
./start_victim_services.sh

Using Stonesoft Evader

Evader Command Syntax

Stonesoft Evader can be used directly to test single evasions. Testing single evasions is
recommended before beginning automated tests of combined evasions to identify any single
evasions that are not detected by the security device. Any successful single evasions can be
excluded from automatic testing. To use automatic testing, see Mongbat Command Syntax
(page 10).
To give Evader commands
1. (Optional) If you want to use a different keyboard layout than the default (UK), enter the
following command to change the keyboard layout: loadkeys <key map>
Example loadkeys fi

2. Change to the /home/<your account>/evader directory.

3. Enter the following command to verify connectivity to the victim computer before testing
evasions:
./evader --attack=http_phpbb_highlight --if=eth0
--src_ip=[Link] --dst_ip=[Link]
--verifydelay=1000 --clean
4. Enter commands in the following format: ./evader [options].
Example ./evader --attack=conficker --evasion=tcp_overlap,345,old,random

The options for the evader command are explained in the tables below.
Table 1.1 Options for Network Configuration

Option

Description

--if=<name>

Interface from which the attacks originate.

--src_ip=<IP address>

The source IP address for the attacks. This address must be a

unique IP address from the same subnet as the IP address of the
attacker computer.
Note! The Evader tool implements its own TCP/IP stack. Do not
use the attacker computers IP address as the source IP address.

--src_port=<port number>

The source port number for the attacks. By default, a random port
number is used.

--src_mask=<netmask>

The source netmask in CIDR notation.

--gw=<IP address>

The IP address of the default gateway if needed.

--dst_ip=<IP address>

The IP address of the victim computer.

--dst_port=<port number>

The port number of a vulnerable service on the victim computer.

Evader Command Syntax

Table 1.2 Options for Attack Configuration

Option

Description

--attacks | -a

Lists the supported attacks.

--info=<attack name>

Shows detailed information about the specified attack and the

options that can be used with the attack.

--attack=<attack name>

Specifies the attack to use.

--clean

Sends only a non-malicious payload to check victim availability.

--obfuscate

Set all obfuscation flags in the attack.

--extra=<option=value>
(,<option=value>)*

Specifies additional options that configure the behavior of the attack

used with the evasion. Separate multiple options with a comma. The
extra exploit options for each attack are listed when you use
--info=<attack name> to display detailed information about the
attack.
Example: --extra=bindport=4567,obfuscate_enc=true,
no_banner=true

Table 1.3 Options for Evasion Configuration

Option

Description

--evasions | -e

Lists the supported evasion techniques for a specific attack

and the evasion-specific options. Not all evasions can be used
with all attacks. An attack must be selected using the -attack=<attack name> option.
Example: --attack=conficker --evasions.

-evasion=
[<start stage>,<end stage>]
<evasion_name>,
<evasion_option=value>
(,<evasion_option=value>)*

Specifies the evasion to use and the evasion-specific options.

Separate multiple options with a comma. An attack must be
selected using the --attack=<attack name> option.
Stages are different points in the progression of an attack. You
can optionally specify that the evasion is only applied during a
particular time period in the attack. The supported stages for
an attack are listed in the attack description. The stages at
which a particular evasion can be applied are listed in the
evasion description.

Using Stonesoft Evader

Each evasion has its own set of options that are specific to that evasion. Use the following
options to show detailed information about the options for a specific evasion:
--info=<evasion_name>
Each evasion-specific option accepts one of the following three types of values (the evasion
description indicates what type of value each option accepts):
Integer: An integer value. The evasion description indicates the range of valid integers and
how to use them with the evasion.
Probability: Indicates how often the evasion is applied to the traffic. Probability values can be
entered in three ways:
As a percentage. For example, 75%. The evasion is applied with a probability of 75% to
each packet, so on average at the end of the attack, 75% of packets will have received
the evasion.
As a number. For example, 3. The evasion is applied to exactly every third packet.
As a list of iterations each preceded by '#'. For example, #3#6#13. The evasion is
applied exactly at the third, sixth and thirteenth iterations.
Multiple Choice: A specific named option. The evasion description specifies whether single
or multiple options can be used with the evasion. The syntax for the option depends on
whether single options or multiple options can be used:
Single Valid: A single named option. Quotes are optional.
Multiple Valid: A single named option or a list of named options separated with a pipe
(|). The entire list of options must be enclosed in quotes to prevent the pipe from being
interpreted as part of the Linux shell command.
Table 1.4 Other Options

Option

Description

--version | -v

Shows the Evader software version.

--cfg_file=<file name>

Reads the configuration from a configuration file.

--autoclose

Automatically close shells without interaction after a successful

attack.

--shell_tcp

Opens the shell control channel to a TCP socket instead of standard

IO.

--summary | -s

Prints a summary before exiting.

--iterations=<number>

Number of consecutive iterations.

--verifydelay=<length
of delay>

Length of time (in milliseconds) to wait before verifying the attack

result. The default is 100.

--randseed=<string>

Sets the seed to use for random number generation. The random
number generator generates random data for the payload of certain
attacks.

--record=<file name>

Records all generated traffic in PCAP format to the specified file.

Evader Command Syntax

Example Evader Output

The following examples show the output when using Evader with the conficker attack.
Table 1.5 Example Evader Command
./evader --if=eth2 --src_ip=[Link] --dst_ip=[Link]
--src_mask=16 --autoclose --attack=conficker --verifydelay=200 --obfuscate
--randseed=+wIBtcAUUS4 --evasion=msrpc_bigendian
Info: Using random seed +wIBtcAUUSI
The following evasions are applied from stage msrpc_bind to end:
- MSRPC messages are sent in the big endian byte order

Table 1.6 Successful Attack

Info: NetBIOS connection [Link]:54263 -> [Link]:445
Info: SMB Native OS is "Windows 5.1", targeting Windows XP SP2
Info: Sending MSRPC request with exploit
Info: Shell found, attack succeeded
Info: Shell closed
0: Success.

Table 1.7 Successful Attack With Late IPS Termination

Info: NetBIOS connection [Link]:59220 -> [Link]:445
Info: SMB Native OS is "Windows 5.1", targeting Windows XP SP2
Info: Sending MSRPC request with exploit
Info: Failed to send MSRPC request containing the exploit.
Info: TCP socket closed due to the maximum number of retransmits sent - probable IPS
termination.
Info: Shell found, attack succeeded
Info: Shell closed
0: Success.

Table 1.8 Failed Attack With IPS Termination

Info: NetBIOS connection [Link]:59220 -> [Link]:445
Info: SMB Native OS is "Windows 5.1", targeting Windows XP SP2
Info: Sending MSRPC request with exploit
Info: Failed to send MSRPC request containing the exploit.
Info: TCP socket closed due to the maximum number of retransmits sent - probable IPS
termination.
Info: No shell, attack failed
200: Connection terminated.

Table 1.9 Connection Failed

Info: NetBIOS connection [Link]:64609 -> [Link]:445
Info: MSRPCServerExploit::MSRPCBind() - Failed to connect to [Link]:445
Error: Exploit running failed
300: TCP connection failed.

Using Stonesoft Evader

Using the Evader Web Interface

The Evader web interface requires a graphical user interface with a web browser, which are not
included in the attacker virtual machine.
To use the Evader web interface
1. Change to the /home/<your account>/evader directory.
2. Enter the following command: ruby [Link].
3. Open a web browser and browse to [Link] The Evader web interface
opens.
3

6
4. Select the attack Module for testing the evasions.
Note If you want to test evasions against a Windows XP victim computer with the
Conficker module, you must install the operating system and configure the vulnerable
services. See the System Requirements (page 3) for more information.
5. Define the module-specific options according to your environment.
6. Define the network options for the Evader command as instructed below:
Setting

Description

Interface

Enter the name of the interface on the attacker computer from which the attacks
originate.

Source IP

Enter the source IP address for the attacks. This address must be a unique IP
address from the same subnet as the IP address of the attacker computer.
Note! The Evader tool implements its own TCP/IP stack. Do not use the attacker
computers IP address as the source IP address.

Destination IP

Enter the IP address of the victim computer.

Gateway IP

Enter IP address of the default gateway if needed.

7. Select the evasions to use and configure evasion-specific options.

8. Click Execute. The Evader command is executed and the output is shown in the text box at
the bottom of the page.
Evader Command Syntax

Mongbat Command Syntax

Mongbat is a testing automation tool that combines evasions to attack the target host. Mongbat
can run multiple instances of the Evader tool with the specified parameters.
To give Mongbat commands
1. Change to the /home/<your account>/evader directory.
2. Enter commands in the following format: ruby [Link] [options].
Example ruby [Link] --iface=eth1 --attack=http_phpbb_highlight
--attacker=[Link] --victim=[Link] --workers=16 --time=3600

The options for the mongbat command are explained in the table below.
Table 1.10 Mongbat Options

Option

Description

--mode=(solo|dual|random)

The mode of attack:

Solo mode uses individual evasions with some options.
Dual mode combines two evasions from the list of enabled evasions.
Random mode uses random evasions from the list of enabled evasions
with random options.
The default is random.

--attack=<attack name>

The attack to use. Default: conficker.

--iface=<interface>

Interface from which the attacks originate.

--attacker=<src ip>

The starting source IP address for the attacks. This address must be a
unique IP address from the same subnet as the IP address of the
attacker computer. The first worker uses this address, and any additional
workers use the next sequential IP addresses. There must be a sufficient
range of free IP addresses to provide a unique IP address for each
worker.
Note! The Evader tool implements its own TCP/IP stack. Do not use the
attacker computers IP address as the source IP address.

--victim=<dst ip>

The IP address of the victim computer.

--mask=<netmask>

The netmask in CIDR notation.

--gw=<IP address>

The gateway address if the victim is not in the local network. Default:
empty.

--time=<time in seconds>

The duration of the attack in seconds when random mode is used. The
default is 60 seconds.

--workers=<worker count>

The number of workers to use for the attacks. Each worker is a separate
instance of the Evader program. There must be a sufficient range of free
IP addresses to provide a unique IP address for each worker.
The default is 1 worker.

--use_evasions=<evasion>
(,evasion)*

Use only the specified evasion(s).

10

Using Stonesoft Evader

Table 1.10 Mongbat Options (Continued)

Option

Description

--disable_evasions=
<evasion> (,evasion)*

Exclude the specified evasions from testing. Disabling evasions is

recommended when dual mode or random mode is used for attacks.
Disabling single evasions that are successful against the security device
is also recommended.

--check_victim=(true|false)

Check that the victim allows legal traffic without evasions before
attacking. Default: true.

--record=<directory name>

Records the attacks to the specified directory in pcap format.

--min_evasions=<number>

The minimum number of evasions to try in random mode. Default: 1.

--max_evasions=<number>

The maximum number of evasions to try in random mode. A value of 0

means an unlimited number of evasions will be tried. Default: 0.

--index=<begin(-end)?>

The start index and optional stop index for solo and dual mode.

--stop_on_success

Stop if an attack is successful.

--passthrough

Pass remaining unknown arguments directly to Evader.

Example Mongbat Output

The following example shows the Mongbat output for a 60 second run with one successful
attack, 21 clean check failures (indicated by 'C') and 135 failed attack attempts (indicated by
'.'). By default, Mongbat first checks that a non-malicious connection to the victim computer
works, and then attacks with evasions. A log file is written to [Link] in the directory
where the Mongbat command is run.
Table 1.11 Example Mongbat Output
ruby [Link] --mode=random --attack=conficker --victim=[Link]
--iface=eth2 --attacker=[Link] --mask=16 --validator=externals/
conficker_validator.rb --workers=4 --time=60
2012-07-09 [Link] INFO Using binary /root/evader_0_9_8_556/evader version Evader
2012-07-09 [Link] INFO Using rand seed IyQlyTgzma4=
2012-07-09 [Link] INFO loading externals/conficker_validator.rb
2012-07-09 [Link] INFO External Validator:
/root/evader_0_9_8_556/externals/conficker_validator.rb: Validate Conficker against
Windows XP SP2 Starting evasions generator: Random evasions generator (Evasion adding
percentage is 0.003278688524590164)

Mongbat Command Syntax

11

Table 1.12 Example Mongbat Output (Continued)

0 runs averaging 0.00 runs / second ; progress: 1/60....C.....
10 runs averaging 1.26 runs / second ; progress: 8/60...C......C...
24 runs averaging 1.85 runs / second ; progress: 13/60...C......C...
38 runs averaging 2.12 runs / second ; progress: 18/60...C......C.
50 runs averaging 2.18 runs / second ; progress: 23/60......C......
63 runs averaging 2.25 runs / second ; progress: 28/60C......C......
77 runs averaging 2.34 runs / second ; progress: 33/60..C......C....
evader --if=eth2 --src_ip=[Link] --dst_ip=[Link] --src_mask=16 --autoclose
--attack=conficker --verifydelay=200 --obfuscate --randseed=u5MBrg3jsSU=
--evasion=msrpc_bigendian
Info: Using random seed +wIBtcAUUSI
The following evasions are applied from stage msrpc_bind to end:
- MSRPC messages are sent in the big endian byte order
Info: NetBIOS connection [Link]:54263 -> [Link]:445
Info: SMB Native OS is "Windows 5.1", targeting Windows XP SP2
Info: Sending MSRPC request with exploit
Info: Shell found, attack succeeded
Info: Shell closed
0: Success.
91 runs averaging 2.40 runs / second ; progress: 38/60...C.......C..
105 runs averaging 2.44 runs / second ; progress: 43/60.....C.......C
119 runs averaging 2.48 runs / second ; progress: 48/60........C....
132 runs averaging 2.49 runs / second ; progress: 53/60..C......C.....
147 runs averaging 2.53 runs / second ; progress: 58/60..C.....C
2012-07-09 [Link] INFO Done.
Printing test result
2012-07-09 [Link] INFO Mongbat test report

Using /root/evader_0_9_8_556/evader version Evader licensed to

Started : 2012-07-09 [Link] +0300
Finished: 2012-07-09 [Link] +0300
Attack : conficker
Network setup:
Attackers: [Link]-[Link]
Victim
: [Link]
Number summary
Attempts
Failures
Success

12

Using Stonesoft Evader

Total
156
156
1

Clean
156
21
135

Exploit
134
134
1

Supported Evasions
The evasions available depend on the selected attack. For example, HTTP evasions can only be
used with HTTP attacks. Use the following command to list the supported evasion techniques
for a specific attack:
./evader --attack=<attack name> --evasions
Table 1.13 Supported Evasions

Evasion

Description

Attack(s)

ipv4_frag

IPv4 fragmentation

conficker, http_phpbb_highlight

ipv4_opt

IPv4 options

conficker, http_phpbb_highlight

msrpc_bigendian

MSRPC big endian

conficker

msrpc_groupsends

Group MSRPC fragments into a single send

conficker

msrpc_ndrflag

MSRPC NDR modifications

conficker

msrpc_seg

MSRPC request segmentation

conficker

netbios_chaff

NetBIOS chaff

conficker

netbios_init_chaff

NetBIOS initial chaff

conficker

smb_chaff

SMB chaff

conficker

smb_decoytrees

SMB decoy trees

conficker

smb_fnameobf

SMB filename obfuscation

conficker

smb_seg

SMB write segmentation

conficker

smb_writeandxpad

SMB WriteAndX padding

conficker

tcp_chaff

TCP Chaff

conficker, http_phpbb_highlight

tcp_initialseq

TCP initial sequence number

conficker, http_phpbb_highlight

tcp_inittsopt

TCP timestamp option settings

conficker, http_phpbb_highlight

tcp_nocwnd

Disable TCP congestion avoidance

conficker, http_phpbb_highlight

tcp_nofastretrans

Disable TCP fast retransmit

conficker, http_phpbb_highlight

tcp_order

TCP segment order

conficker, http_phpbb_highlight

tcp_overlap

TCP segment overlap

conficker, http_phpbb_highlight

tcp_paws

TCP PAWS elimination

conficker, http_phpbb_highlight

tcp_recv_window

TCP receive window

conficker, http_phpbb_highlight

tcp_seg

TCP segmentation

conficker, http_phpbb_highlight

tcp_timewait

TCP TIME-WAIT decoys

conficker, http_phpbb_highlight

Supported Evasions

13

Table 1.13 Supported Evasions

Evasion

Description

Attack(s)

tcp_tsoptreply

TCP timestamp echo reply modifications

conficker, http_phpbb_highlight

tcp_urgent

TCP urgent data

conficker, http_phpbb_highlight

http_header_lws

HTTP header linear whitespace

http_phpbb_highlight

http_known_user_agent

HTTP known user agent

http_phpbb_highlight

http_request_line_separator

HTTP request line separator

http_phpbb_highlight

http_request_method

HTTP request method

http_phpbb_highlight

http_request_pipelined

HTTP request pipelined

http_phpbb_highlight

http_url_absolute

HTTP URL absolute

http_phpbb_highlight

http_url_dummypath

HTTP dummy paths

http_phpbb_highlight

http_url_encoding

HTTP URL encoding

http_phpbb_highlight

http_version

HTTP request version

http_phpbb_highlight

14

Using Stonesoft Evader

Stonesoft Guides
Administrators Guides - step-by-step instructions for configuring and managing the system.
Installation Guides - step-by-step instructions for installing and upgrading the system.
Reference Guides - system and feature descriptions with overviews to configuration tasks.
User's Guides - step-by-step instructions for end-users.

For more documentation, visit

[Link]/support/

Stonesoft Corporation
Itlahdenkatu 22 A
FI-00210 Helsinki
Finland
Tel. +358 9 476 711
Fax +358 9 4767 1349

Stonesoft Inc.
1050 Crown Pointe Parkway
Suite 900
Atlanta, GA 30338
USA
Tel. +1 770 668 1125
Fax +1 770 668 1131

Copyright 2012 Stonesoft Corporation. All rights reserved. All specifications are subject to change.