Scribd
Upload
303 views4 pages

FACP Operation Manual

This document provides instructions for responding to a fire alarm, including: 1. Identifying the location of the fire from the fire panel display and silencing the alarm. 2. Checking if it is a fault alarm or actual fire, and resetting the panel for a fault alarm. 3. Activating the fire alarm if it is an actual fire. It also provides steps for resetting a fire alarm panel if the manual call point was activated, as well as instructions for bypassing and unbypassing an active fire alarm device. Finally, it explains how to view the log of events on the fire panel screen or by printing.

Uploaded by

Amiyu Kumudun
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
303 views4 pages

FACP Operation Manual

This document provides instructions for responding to a fire alarm, including: 1. Identifying the location of the fire from the fire panel display and silencing the alarm. 2. Checking if it is a fault alarm or actual fire, and resetting the panel for a fault alarm. 3. Activating the fire alarm if it is an actual fire. It also provides steps for resetting a fire alarm panel if the manual call point was activated, as well as instructions for bypassing and unbypassing an active fire alarm device. Finally, it explains how to view the log of events on the fire panel screen or by printing.

Uploaded by

Amiyu Kumudun
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
Download as pdf or txt
You are on page 1/ 4

.sks wk;=re we.

f ix{d moaO;sh ls%hd;aul


jq g .; hq;= l%shdud.'
Operation to be done in case of fire.
1. Fire panel ;srh u; wk;=re is we;s ia:dkh ykd .ekSu'
Identify the location by reading the display.
2. Signal silence fnd;a;u ;o lr iSkq l%h
s d rys; lrkak' ;srh u;
fmkajk ,o wod, ia:dkhg f.dia th jeros ix{djlao .sks ix{djlaao
lshd mlaId lrkak'
Silence the Alarm systems and move to the location and check
whether its a Fault alarm or a Fire alarm.
3. th jeros ix{djla k mek,h h;d ;;ajhg m;a lsug System
reset fnd;a;u ;o lrkak
If it is a fault alarm, reset the panel by pressing system reset button.
4. th .sks ix{djla k jydu ix{d moaO;sh kej; l%h
s d;aul
lrkak' l%shd;aul lsu ioyd Fire mek,h signal silence fnd;a;u
kej; ;o lrkak'
If it is actual fire, press signal silence again and activate the fire
Alarm

Fire mek,h h;d ;a;jhg m;alsrsug


Resetting the Fire Alarm panel
1. Manual call point l%shd;aul lr we;ak th h;d ;;ajhg
m;a lrkak'
If manual call point has been activated, first reset the Manual
call point.
2. Fire mek,h h;d ;;ajhg m;a lsrsug System reset button
;o lrkak'
Reset the fire panel by pressing system reset button.

Bypassing an active device


1. MENU Button ;o lrkak'
Press the Menu Button.
2. Bypass Menu f;drd .ekSug iy Buttons Nd;d lrkak
a '
Use and buttons to scroll the castor to select Bypass Menu.
3. ENTER Button ;o lr Bypass Menu f;dard .kak.
Press Entre button to select the bypass Menu.
4. Devices Bypass lsrsug Devices / circuit f;drd .kak.
Select Device/ circuit to bypass the devices '
5. uqr mdoh we;=,;a lrkak'
Enter your passcode.
6. Node no we;=,;a lr Enter Button ;o lrkak'
Enter the Node Number, then pressing Enter.
7. Loop no tl we;=,;a lr Enter Button ;o lrkak
Enter the Loop Number, then pressing Enter.
8. Device no tl we;=,;a lr Enter button ;o lrkak
Enter the Device Number, then pressing Enter.
9. Device bypass lsrsug wjYH k yes f;dard Enter Button ;o
lrkak
If you want to bypass the Device, select Yes and press Enter
Button.

Unbypass lsrsug
Unbypassing an active device
1. Bypass lrk ,o Device tflys Node no / loop no iy Device no
we;=,;a lrkak'
Enter the Node no, Loop on and Device no of the bypassed Device.
2. Device unbypass lsrsug wjYH k Yes f;dard Enter button ;o
lrkak'
If you want to unbypass the device, select yes and press Enter
Button

Log igyka mCId lsug


1) MENU Button ;o lrkak'
Press the Menu Button
2) Enter Button ;o lr Report Menu f;dard .kak'
Press Enter Button to select the Report Menu
3) wjYH log igyka f;dard .ekSug iy Button Nd;d lrkak'
Use and buttons to scroll the cursor thingy the menu.
4) Enter Button ;o lrkak wjYH log igyk f;dard.kak'
Press Entre button to select log.
5) Log igyka print lsrsug printer f;dard Enter button ;o lrkak'
To print the logs, select printer and press the Enter button
Note :- printer and Fire panel inkaO lr ;sh hq;=h'
Printer should be connected to fire Alarm panel
6) Log igyka ;srh u; igyka lr .ekSug zzScreenZZ f;dard Enter
button ;o lrkak'
To print the log on the screen, select Screen, then press the Enter
Button

7) wu;r f;dr;=re ,nd .ekSug ioyd Log igyk u; Info Button


;o lrkak'
Press Info Button for more information on the logged event.
8) MENU igyka bj;aug CANCEL Button ;o lrkak'
Press CENCEL button to exit the command Menu.

You might also like