Section I - Introduction Section 2 - Task Analysis and Sequence Flow Chart For The Major Functions of The GB

MODULE 4
WORK PROCESS DESIGN

Section I Introduction
Section 2 Task Analysis and Sequence Flow Chart for the Major
Functions of the NEPA GB
Chart I Planning and Work Programming Process Flow
Chart II Policy and Guidelines Formulation Process Flow
Chart III Monitoring and Evaluation Process Flow
Section 3 Work Process Design for the NEPA GB Action Plan
1.1 Determine current status of air quality within the NEPA AS
1.2 Establish air shed emission inventory
1.3 Development of local emission factors
1.4 Establish a GIS system reflecting the location of plants and main thoroughfares
1.5 Conduct air quality carrying capacity studies for the NEPA AS
1.6 Formulate policy recommendations on management of vehicular and stationary
emissions
1.7 Review and revise standard and air quality guideline values
1.9 Establish basis for establishment of attainment/non-attainment areas
1.10 Assess existing policy on Private Emission Testing Centers (PETC)
2.1 Package and publish annual report on air quality within the air shed
2.2 Conduct forum on the provisions of CAA among the stakeholders
2.3 Advocate for creation of ENRO/MENRO for all municipalities
2.4 Advocate for creation of ASBU for all municipalities
2.5 Develop a program to recognize best environmental practices
2.6 Develop and maintain electronic-based IEC materials (interactive games & website)
2.7 Conduct trainers training to assist in advocacy
2.8 Conduct educational campaigns for transport operators
2.9 Establish database on best practices in the implementation of CAA
2.10 Create a speakers bureau on CAA
2.11 Coordinate with DepEd, CHED and TESDA in the integration of CAA on school
curriculum
3.1 Identify and access funding and other sources
3.2 Develop a work and financial plan
3.3 Monitor resource utilization
Section 4 Summary of Outputs from the NEPA GB Action Plan
Section 1: Introduction
This document is divided into three major parts. The first part (Section 2)
presents the task analysis and sequence flow chart of the different activities that
the NEPA Governing Board will undertake in order to carry out its three major
functions - planning, policy making, and monitoring and evaluation.
The second part (Section 3) presents the work process flow charts of the
different activities identified in the NEPA GB Action Plan. These flow charts
specify the work process linkages, information requirements and approval
process between and among the Executive Committee, Technical Working
Groups, Technical Secretariat and the NEPA Airshed Governing Board as a
whole. The third part (Section 4) summarizes the outputs required from each
activity identified in the NEPA GB Action Plan.
Section 2: Task Analysis and Sequence Flow Chart for the Major Functions of the
NEPA Governing Board
This section presents the task analysis and sequence flow chart of the different
activities that the NEPA Governing Board will undertake in order to carry out its
three major functions, to wit:
1. Planning and Work Programming
2. Policy and Guidelines Formulation
3. Monitoring and Evaluation
These functions are illustrated by way of task analysis and sequence flow charts,
an analytical tool used in organizing tasks or work activities. The matrix shows in
a nutshell what outputs to be delivered, the inputs required, who performs what
activities, and when (although in this case, the time log was excluded). Every
task or responsibility is represented by a symbol. A symbol for supplier means
the person or group where the symbol falls must perform the task to be delivered
to a customer or receiver. The shared responsibility means two or more persons
or groups must perform the task simultaneously. Each major task has sub-tasks
or activities that are arranged in sequence. It indicates what tasks will need to be
undertaken in order to accomplish the major task, and which activities will need
to be undertaken first before the other. The purpose of using this framework is to
identify the activities and establish their sequence of performance in order to
accomplish the assigned tasks systematically.
NEPA GB
Chart 1 - Planning and Work Programming Process Flow
GB EXE COM TWG TA
DRIVER/INPUT ACTIVITIES REMARKS/

OTHER PLAYERS
1. Develop NEPA AS Air Quality Improvement Framework RA 8749, DAO 200081 & Public Interest
1.1. Establish ambient air quality guideline values In cooperation with
DOTC, DOST, DOH & DTI
1.2 Review air quality guideline values In cooperation with DOTC,
DOST, LGUs,DOH & DTI
1.3 Formulate pollution standards indices In cooperation with DOTC,
DOST, LGUs, DOH & DTI
1.4 Take pollution inventory based on the standard indices and NEPA
Air Pollution Status Report In cooperation with DOTC, DOST,
LGUs, DOH, NSCB & DTI
2. NEPA AS Strategic Plan on Air Pollution Inventory & Status Report and
NEPA AS Air Quality Improvement Framework
2.1 Formulate NEPA AS Vision-Mission-Goals through Strategic
Visioning Workshop
2.2 Devise Strategic Plan
2.3 Documentation, synthesis and summary of workshop output
3. NEPA AS Air Quality Action Plan NEPA AS Strategic Plan
3.1 Prepare Work Program with defined tasks
accountable, timetable and budget
and
persons
3.2 Review and evaluate Work Program for GB Approval

4. Approved Work Program NEPA AS Air Quality Action Plan
4.1 Governing Board approves Work Program during regular or
emergency Board meeting
5. Implementing Policies, Rules and Guidelines RA 8749, DAO 2000-81 & Air
Quality Action Plan Refer to Output/Responsibility Chart (Policy and Guidelines
Process Flow)
5.1 Coordinate with responsible partners and disseminate
6. Implementation Approved Work Program
NEPA GB
Chart II Policy & Guidelines Formulation Process Flow
GB EXE COM TWG TA DRIVER/INPUT ACTIVITIES REMARKS/ OTHER

PLAYERS
1.1. Gather the issues and/or concern In cooperation with DOTC, DOST, LGUs,
DOH & DTI, NGOs, POs, Industry Sector, etc.
1.2 evaluate the issues or concern if relevant or not
1.3 Gather facts and/or information In cooperation with DOTC, DOST, LGUs,
DOH & DTI, NGOs, POs, Industry Sector, etc.
1.4 Consolidate facts, summarize and generate report
1.5 Evaluate and analyze impact
1.6 Draft policies, rules or guidelines and submit for comments, corrections or
suggestions of partners In cooperation with DOTC, DOST, LGUs, DOH & DTI,
NGOs, POs, Industry Sector, etc.
1.7 Finalize draft
1.8 Review final draft and submit to GB for approval
1.9 approve policies, rules or guidelines
1. 10 NEPA AS Operating Policies, Rules and/or Guidelines NEPA AS Action
Plan & Work Program (Output/responsibility I); Changes in assumptions;
Changes in general condition; Internal or external conflict; New opportunities
1.10 Disseminate approved policies, rules or guidelines for compliance of
concerned parties In cooperation with DOTC, DOST, LGUs, DOH & DTI, NGOs,
POs, Industry Sector, etc.
MMASGB
Chart III Monitoring and Evaluation Process Flow
1.1. Review Action Plan and Work Program to determine and establish
milestones and parameters
1.2 Define the evaluation criteria and establish benchmark or standard or target
In cooperation with DOTC, DOST, LGUs, DOH & DTI, NGOs, POs, Industry
Sector, etc.
1.3 Design reporting procedure and report format
1. Monitoring and Evaluation NEPA AS Action Plan & Work Program
(Output/responsibility I); Policies, Rules and Guidelines (Output/responsibility II)
1.4 Set timetable and frequency of reporting
1.5 Outline policy for noncompliance and delineate persons who are accountable
1.6 Design Monitoring Information System configuration from data encoding,
storage, retrieval, analysis & evaluation to report generation
1.7 Determine the software, hardware and people requirements to run the
Monitoring Information System
1.8 Develop Monitoring and Evaluation Manual including timeframe and budget
1.9 Submit Draft Manual with proposed budget to ExeCom for final evaluation
1.10 Review Draft Manual & Budget and submit to GB for approval
1.11 Approve Monitoring and Evaluation Manual & Budget
1.12 Disseminate approved Monitoring and Evaluation Manual to all concerned
parties and implement DOTC, DOST, LGUs, DOH & DTI, NGOs, POs, Industry
sector, etc.
Section 3: Work Process Design for the NEPA AS GB Action Plan
The work process design aims to specify the work process linkages, information
requirements and approval process between and among the Executive
Committee, Technical Working Groups, Technical Secretariat and the NEPA
ASGB as a whole. The purpose of defining these work processes is to develop a
clear alignment of work responsibilities, accountabilities, and information flow
within the NEPA AS GB as it implements its Action Plan. It also aims to organize
and establish the priorities in order to accomplish the assigned tasks, and
improve efficiency in resource utilization by avoiding duplication of efforts and
encouraging appropriate use of skills and institutional mandates. In the following
charts, the components of the NEPA AS GB Action Plan have been classified into
strategic, tactical and operational activities. Strategic activities are those which
have long-term impact, ranging from a year to twenty years and are usually
executed at the top management or executive level. These are accomplished
least in frequency compared to tactical and operational activities. Tactical
activities, on the other hand, are more frequently accomplished and have
medium-term impact compared to strategic activities. Its duration of impact often
ranges from a month to a year. These are accomplished at the middle
management levels. Operational activities are daily to monthly activities which
are usually routine tasks and will have to be accomplished at the lowest level of
the organizational hierarchy. It has the highest incidence of frequency among all
activities. In work process and organizational design, it is vital that activities are
segregated into strategic, tactical and operational activities in order to properly
allocate functions to positions which should have the appropriate knowledge,
attitude, skills and abilities. This shall also serve as a good foundation for
designing appropriate job dimensions, job content, job context and thereafter, a
rationalized salary scale design for the entity.

Section I - Introduction Section 2 - Task Analysis and Sequence Flow Chart For The Major Functions of The GB

Uploaded by

Section I - Introduction Section 2 - Task Analysis and Sequence Flow Chart For The Major Functions of The GB

Uploaded by

MODULE 4

WORK PROCESS DESIGN

DRIVER/INPUT ACTIVITIES REMARKS/

3.2 Review and evaluate Work Program for GB Approval

GB EXE COM TWG TA DRIVER/INPUT ACTIVITIES REMARKS/ OTHER

You might also like