You may use the following values of physical constants WHEN NEEDe

cessary :
108

c=3
m/s
h = 6.63 1034 Js
e = 1.6 1019 C
0 = 4 107 T m A1
0 = 8.854 1012 C2 N1 m2
1
= 9 109 N m2 C2
40
me = 9.1 1031 kg
mass of neutron = 1.675 1027 kg
mass of proton = 1.673 1027 kg
Avogadros number = 6.023 1023 per gram mole
Boltzmann constant = 1.38 1023 JK1

Section A
1. Define capacitor reactance. Write its S.I. units.
2. What is the electric flux through a cube of side 1 cm which encloses an electric dipole ?
3. A concave lens of refractive index 1.5 is immersed in a medium of refractive index 1.65.
What is the nature of the lens ?
4.

How are side bands produced ?

Section B (2) MRKS. EACH QUES.

A proton and an -particle have the same de-Broglie wavelength. Determine the ratio
of (i) their accelerating potentials (ii) their speeds.
2
7. Show that the radius of the orbit in hydrogen atom varies as n , where n is the
principal quantum number of the atom.

6.\

8.

Distinguish between intrinsic and extrinsic semiconductors.

9.

Use the mirror equation to show that an object placed between f and 2f of a concave
mirror produces a real image beyond 2f.
OR

Find an expression for intensity of transmitted light when a polaroid sheet is rotated
between two crossed polaroids. In which position of the polaroid sheet will the
transmitted intensity be maximum ?
10.

Use Kirchhoffs rules to obtain conditions for the balance condition in a Wheatstone
bridge.
Section C M (3) MRKS. EACH QUES.

11.

Name the parts of the electromagnetic spectrum which is

(a)

suitable for radar systems used in aircraft navigation.

(b)

used to treat muscular strain.

(c)

used as a diagnostic tool in medicine.

Write in brief, how these waves can be produced.

15.

Draw a block diagram of a detector for AM signal and show, using necessary
processes and the waveforms, how the original message signal is detected from the
input AM wave.

12.

(i)

(i)

A giant refracting telescope has an objective lens of focal length 15 m. If an eye

piece of focal length 1.0 cm is used, what is the angular magnification of the
telescope ?

(ii)

If this telescope is used to view the moon, what is the diameter of the image of
the moon formed by the objective lens ? The diameter of the moon is 3.48 106 m
and the radius of lunar orbit is 3.8 108 m.

Write Einsteins photoelectric equation and mention which important features in

13.

photoelectric effect can be explained with the help of this equation.

The maximum kinetic energy of the photoelectrons gets doubled when the wavelength
of light incident on the surface changes from 1 to 2. Derive the expressions for the
threshold wavelength 0 and work function for the metal surface.
In the study of Geiger-Marsdon experiment on scattering of particles by a thin foil of

14.

gold, draw the trajectory of -particles in the coulomb field of target nucleus. Explain
briefly how one gets the information on the size of the nucleus from this study.
From the relation R = R0 A1/3, where R0 is constant and A is the mass number of the
nucleus, show that nuclear matter density is independent of A.
OR

Distinguish between nuclear fission and fusion. Show how in both these processes
energy is released.
Calculate the energy release in MeV in the deuterium-tritium fusion reaction :
2
1H

+ 1H 2He + n

Using the data :

2

m(1H) = 2.014102 u
16.

mn = 1.008665 u
3

m(1H) = 3.016049 u

1u = 931.5 MeV/c2
4

m(2He) = 4.002603 u

A cell of emf E and internal resistance r is connected across a variable load resistor
R. Draw the plots of the terminal voltage V versus (i) R and (ii) the current I.
It is found that when R = 4 , the current is 1 A and when R is increased to 9 , the
current reduces to 0.5 A. Find the values of the emf E and internal resistance r.

20.

Draw a circuit diagram of a transistor amplifier in CE configuration.

Define the terms : (i) Input resistance and (ii) Current amplification factor. How are
these determined using typical input and output characteristics ?

17. Two capacitors of unknown capacitances C1 and C2 are connected first in series and
then in parallel across a battery of 100 V. If the energy stored in the two combinations
is 0.045 J and 0.25 J respectively, determine the value of C1 and C2. Also calculate the
charge on each capacitor in parallel combination.
18.

State the principle of working of a galvanometer.

A galvanometer of resistance G is converted into a voltmeter to measure upto V volts
by connecting a resistance R1 in series with the coil. If a resistance R2 is connected in
series with it, then it can measure upto V/2 volts. Find the resistance, in terms of
R1 and R2, required to be connected to convert it into a voltmeter that can read upto

19.

2 V. Also find the resistance G of the galvanometer in terms of R1 and R2.

With what considerations in view, a photodiode is fabricated ? State its working with
the help of a suitable diagram.

Eventhough the current in the forward bias is known to be more than in the reverse
bias, yet the photodiode works in reverse bias. What is the reason ?
20. Answer the following questions :
(a)

In a double slit experiment using light of wavelength 600 nm, the angular width
of the fringe formed on a distant screen is 0.1. Find the spacing between the two
slits.

(b)

Light of wavelength 5000 propagating in air gets partly reflected from the
surface of water. How will the wavelengths and frequencies of the reflected and
refracted light be affected ?

22.

An inductor L of inductance XL is connected in series with a bulb B and an ac source.

How would brightness of the bulb change when (i) number of turn in the inductor is
reduced, (ii) an iron rod is inserted in the inductor and (iii) a capacitor of reactance
XC = XL is inserted in series in the circuit. Justify your answer in each case.
Section D (4) MRKS. ON EACH QUES.

23.

A group of students while coming from the school noticed a box marked Danger H.T.
2200 V at a substation in the main street. They did not understand the utility of a such
a high voltage, while they argued, the supply was only 220 V. They asked their teacher
this question the next day. The teacher thought it to be an important question and
therefore explained to the whole class.
Answer the following questions :
(i)

What device is used to bring the high voltage down to low voltage of a.c. current
and what is the principle of its working ?

(ii)

Is it possible to use this device for bringing down the high dc voltage to the low
voltage ? Explain.

(iii) Write the values displayed by the students and the teacher.

24.

(a)

State Amperes circuital law. Use this law to obtain the expression for the
magnetic field inside an air cored toroid of average radius r, having n turns
per unit length and carrying a steady current I.

(b)

An observer to the left of a solenoid of N turns each of cross section area A

observes that a steady current I in it flows in the clockwise direction. Depict the
magnetic field lines due to the solenoid specifying its polarity and show that it
acts as a bar magnet of magnetic moment m = NIA.
OR

(a)

Define mutual inductance and write its S.I. units.

(b)

Derive an expression for the mutual inductance of two long co-axial solenoids of
same length wound one over the other.

(c)

In an experiment, two coils c1 and c2 are placed close to each other. Find out the
expression for the emf induced in the coil c1 due to a change in the current
through the coil c2.

25.

(a)

Using Huygenss construction of secondary wavelets explain how a diffraction

pattern is obtained on a screen due to a narrow slit on which a monochromatic
beam of light is incident normally.

(b)

Show that the angular width of the first diffraction fringe is half that of the
central fringe.

(c)

Explain why the maxima at = n + become weaker and weaker with

2 a

increasing n.

OR
(a)

A point object O is kept in a medium of refractive index n1 in front of a convex

spherical surface of radius of curvature R which separates the second medium of
refractive index n2 from the first one, as shown in the figure.
Draw the ray diagram showing the image formation and deduce the relationship

(b)

between the object distance and the image distance in terms of n1, n2 and R.
When the image formed above acts as a virtual object for a concave spherical
surface separating the medium n2 from n1 (n2 > n1), draw this ray diagram and
write the similar (similar to (a)) relation. Hence obtain the expression for the lens
makers formula.

26.

(a)

An electric dipole of dipole moment p consists of point charges +q and q

separated by a distance 2a apart. Deduce the expression for the electric field E
due to the dipole at a distance x from the centre of the dipole on its axial line in

terms of the dipole moment p . Hence show that in the limit x >> a, E 2 p /
(4 0 x3).
(b)

Given the electric field in the region E = 2x i, find the net electric flux through
the cube and the charge enclosed by it.

OR
(a)

Explain, using suitable diagrams, the difference in the behaviour of a

(i) conductor and (ii) dielectric in the presence of external electric field. Define
the terms polarization of a dielectric and write its relation with susceptibility.

(b)

A thin metallic spherical shell of radius R carries a charge Q on its surface. A

point charge

Q
is placed at its centre C and an other charge +2Q is placed
2

outside the shell at a distance x from the centre as shown in the figure. Find (i)
the force on the charge at the centre of shell and at the point A, (ii) the electric
flux through the shell.