Fastener

Fastener Specifications
Standard Specifications for Fasteners

Standards for Fasteners from American ASTM Steel Standards for Fasteners
Society for Testing and Materials (ASTM)
ASTM A36 Standard Specification for Structural Steel
ASTM Fastener Standards Interchangeable with SAE C1018 Low Carbon,
general purpose, special quality machinery steel.
This specification covers carbon steel shapes, plates,
ASTM A194 Standard Specification for Carbon and
and bars of structural quality for use in riveted, bolted,
Alloy Steel Nuts for Bolts for High Pressure and
or welded construction of bridges and buildings, and for
High Temperature Service. general structural purposes.
This specification covers a variety of carbon and alloy
steel nuts. These steel nuts are used with A 325 Bolts.
ASTM A242, A588, and A709 Standard Specifications
Hughes Brothers uses Grade 2H.
for High Strength Low Alloy Structural Steels with
enhanced atmospheric corrosion resistance.
ASTM A307 Standard Specification for Carbon Steel
Bolts and Studs, 60,000 PSI Tensile Strength
This specification covers the chemical and mechanical ASTM A536 Ductile Iron Castings
requirements of two grades of carbon steel bolts and This specification covers castings made of ductile iron, also
studs in sizes 1/4 inch through 4 inch.
Grade A bolts are used for general applications.
known as spheroidal or nodular iron is used for eyenuts and
washer nuts, Grade 65-45-12. E
ASTM A320 Alloy Steel Bolting Material for Low-Tem-
ASTM A325 Standard Specification for High-Strength
perature Service. This specification covers alloy steel
Bolts for Structural Steel Joints
bolting materials for pressure vessels, valves, flanges, and
This specification covers the chemical and mechanical
fittings for low-temperature service. The term "bolting
requirements of various types of quenched and tem-
material" as used in this specification covers rolled, forged,
pered steel bolts commonly known as high strength
or strain hardened bars, bolts, screws, studs, and stud
structural bolts, intended for use in structural joints.
bolts. The material may be further processed by centerless
Type 1, Bolts made of medium carbon steel.
grinding or by cold drawing. Austenitic stainless steel may
Type 3, Bolts having atmospheric corrosion resistance.
be solution annealed or annealed and strain-hardened.
Several grades are available.
ASTM A394 Standard Specification for Zinc Coated
Steel Transmission Tower Bolts
This specification covers the chemical and mechanical
requirements of hexagon and squarehead zinc coated
steel bolts and atmospheric corrosion resistant bolts in
nominal thread diameters of 1/2, 5/8, 3/4, 7/8 and 1 inch
for use in the construction of transmission towers,
substations, and similar steel structures.
Type 0: Zinc coated bolts made of low or medium
carbon steel.
Type 3: Bolts having atmospheric corrosion resistance
and weathering characteristics comparable to that of
steel covered in Specifications A242, A588 and A709.
ASTM A563 Standard Specification for Carbon and

Alloy Steel Nuts
This specification covers chemical and mechanical
requirements for eight grades of carbon and alloy steel
nuts for general structural and mechanical uses on
bolts, studs, and other externally threaded parts.
Grade A nuts are used for general applications.
E-1
Hughes Brothers, Inc.
P.O. Box 159 / 210 N. 13th / Seward, NE 68434 / Phone (402) 643-2991 / Fax (402) 643-2149 2001 Hughes Brothers, Inc.
Fastener Specifications
ASTM Galvanizing Standards
ASTM A123 Standard Specification for Zinc (Hot Dip ANSI/ASME B18.15 Standard for Forged Eyebolts
Galvanized) Coatings on Iron and Steel Products This standard is limited to dimensions and capacities for
This specification covers the requirements for zinc forged threaded eyebolts intended primarily for lifting
coating (galvanizing) by the hot dip process on iron and applications.
steel products made from rolled, pressed and forged
shapes, castings, plates, bars and strips. ANSI/ASME 18.2.2 Standard for Square and Hex Nuts
This specification covers both unfabricated products This standard is intended to cover the complete general
and fabricated products, for example, assembled steel and dimensional data for the various types of inch series
products, structural steel fabrications, large tubes al- square and hex nuts.
ready bent or welded before galvanizing, and wire work
fabricated from uncoated steel wire.
This specification also covers steel forgings and iron
Standards from the American National
castings incorporated into pieces fabricated before gal- Standard Institute - Pole Line Hardware
vanizing or which are too large to be centrifuged (or
otherwise handled to remove excess galvanizing bath ANSI C135.1 Standard for galvanized steel bolts and
metal). nuts for overhead line construction.
This standard covers carriage bolts, machine bolts,
ASTM A153 Standard Specification for Zinc Coating double arming bolts, double end bolts, and nuts com-
(Hot Dip) on Iron and Steel Hardware
This specification covers zinc coatings applied by the
monly used in overhead line construction.
E
hot dip process on iron and steel hardware. ANSI C135.2 Standard for threaded galvanized
This document is intended to be applicable to hardware ferrous strand-eye anchor rods and nuts of over-
items that are centrifuged or otherwise handled to head line construction.
remove excess galvanizing bath metal (free zinc).
ANSI C135.4 Standard for galvanized ferrous eyebolts
Standards from American National and nuts for overhead line construction.
Standards Institute & American Society
of Mechanical Engineers ANSI C135.5 Standard for galvanized ferrous eyenuts
and eyelets for overhead line construction.
ANSI/ASME B1.1 Standard for Unified Inch Screw
Threads (UN and UNR Thread Form) ANSI C135.14 Standard staples with rolled or slash
This specification specifies the thread form, series, points for overhead line construction.
class, allowance, tolerance, and designation for unified
screw threads.
Standards from the International
ANSI/ASME B18.2.1 Standard for Square and Hex
Fasteners Institute
Bolts and Screws
This Standard is intended to cover the complete general
and dimensional data for the various types of inch series IFI 136 Standard for Studs and Bent Bolts
square and hex bolts and screws. This standard covers the general and dimensional
requirements for various types of studs and bent bolts,
including threaded rod, J-bolts, L-bolts, U-bolts, and
ANSI/ASME B18.5 Standard for Round Head Bolts
eyebolts (closed).
(Carriage Bolts)
This standard covers the complete general and dimen-
IFI 128 Standard for Hex Coupling Nuts
sional data for the various types of inch series bolts
generally classified as round head bolts. This standard covers the general and dimensional
requirements for hex coupling nuts.
E-2
Fasteners
Dimension Table
Bolt Nominal Head
Nominal
Square Head Bolts
Width
Size Width Height
3/8" 9/16" 1/4" Hughes Brothers Square Head Machine Bolts are
1/2" 3/4" 21/64" manufactured in accordance with ANSI C135.1 using
5/8" 15/16" 27/64" SAE C1018 cold drawn or ASTM A36 steel. The
3/4" 1-1/8" 1/2" machine bolts are galvanized in accordance with ASTM
7/8" 1-5/16" 19/32" A153. Each bolt is shipped with an assembled nut. All
1" 1-1/2" 21/32" bolts feature a 60 semi-cone point.
1-1/4" 1-7/8" 27/32"
Following ANSI specifications, the unthreaded portion
of any machine bolt is capable of being bent 180,
about a diameter equal to the diameter of the bolt
Head Height without cracking the steel on the outside portion of the
bend.
E
Bolt
Size
Shear Strengths Tensile Strengths Decimal

Equivalency
Minimum
Bolt Single Shear Single Shear Chart
Bolt Tensile
Diameter Through Threads Through Shaft Diameter Strength Fraction Decimal HUGHES
1/4" .2 2
3/8" - - 3/8" 4,250 lbs.
3/8" .3 3
1/2" 5,200 lbs. 7,950 lbs. 1/2" 7,800 lbs.
1/2" .5 5
5/8" 8,330 lbs. 12,420 lbs. 5/8" 12,400 lbs.
5/8" .6 6
3/4" 12,440 lbs. 17,890 lbs. 3/4" 18,350 lbs.
3/4" .7 7
7/8" 17,270 lbs. 24,350 lbs. 7/8" 25,400 lbs.
7/8" .8 8
1" 22,690 lbs. 31,800 lbs. 1" 33,500 lbs.
1" .1 10
1-1/4" 36,590 lbs. 49,700 lbs. 1-1/4" 53,300 lbs.
1-1/8" 1.125 11
1-1/4" 1.25 12
Ordering Information
B716-6
Thread length in inches
Bolt length in inches
First digit in decimal equivalent (see chart)
Designates square head machine bolts
E-3
Fasteners - Bolts
Square Head Bolts
Stock Item Std. Weight Stock Item Std. Weight

No. Description Pkg. 100 Pcs. No. Description Pkg. 100 Pcs.
1/2" Square Head Bolts 3/4" Square Head Bolts

B51-1/2-1-1/4 1/2" x 1-1/2" 250 20 lbs. B72-1-3/4 3/4" x 2" 100 56 lbs.
B52-1-1/4 1/2" x 2" 250 23 lbs. B72-1/2-1-3/4 3/4" x 2-1/2" 100 62 lbs.
B52-1/2-1-1/4 1/2" x 2-1/2" 250 25 lbs. B73-1-3/4 3/4" x 3" 100 68 lbs.
B53-1-1/4 1/2" x 3" 250 28 lbs. B74-2 3/4" x 4" 50 80 lbs.
B53-1/2-1-1/4 1/2" x 3-1/2"
B54-1-1/4 1/2" x 4"
200
100
31 lbs.
33 lbs.
B75-2
B76-3
3/4" x 5"
3/4" x 6"
50
50
91 lbs.
103 lbs. E
B54-1/2-1-1/4 1/2" x 4-1/2" 100 36 lbs. B77-3 3/4" x 7" 40 115 lbs.
B55-1-3/4 1/2" x 5" 100 39 lbs. B78-4 3/4" x 8" 40 127 lbs.
B55-1/2-1-1/4 1/2" x 5-1/2" 100 41 lbs. B710-4 3/4" x 10" 30 151 lbs.
B56-3 1/2" x 6" 100 44 lbs. B712-6 3/4" x 12" 30 175 lbs.
B57-3 1/2" x 7" 100 49 lbs. B714-6 3/4" x 14" 30 198 lbs.
B58-4 1/2" x 8" 100 55 lbs. B716-6 3/4" x 16" 25 222 lbs.
B59-4 1/2" x 9" 50 60 lbs. B718-6 3/4" x 18" 20 246 lbs.
B510-4 1/2" x 10" 50 65 lbs. B720-6 3/4" x 20" 20 270 lbs.
B512-6 1/2" x 12" 50 76 lbs. B722-6 3/4" x 22" 20 293 lbs.
B514-6 1/2" x 14" 50 87 lbs. B724-6 3/4" x 24" 15 317 lbs.
B726-6 3/4" x 26" 15 341 lbs.
5/8" Square Head Bolts B728-8 3/4" x 28" 15 365 lbs.
B61-1/2-1-1/4 5/8" x 1-1/2" 100 31 lbs. B730-8 3/4" x 30" 10 390 lbs.
B61-3/4-1-1/4 5/8" x 1-3/4" 100 33 lbs. B732-8 3/4" x 32" 10 424 lbs.
B62-1-1/2 5/8" x 2" 100 35 lbs.
B63-1-1/2 5/8" x 3" 100 44 lbs.
B64-1-1/2 5/8" x 4" 100 52 lbs.
B65-1-1/2 5/8" x 5" 100 60 lbs.
B66-1-1/2 5/8" x 6" 50 68 lbs.
B67-3 5/8" x 7" 50 77 lbs.
B68-4 5/8" x 8" 50 85 lbs.
B610-4 5/8" x 10" 50 101 lbs.
B612-6 5/8" x 12" 40 118 lbs. Note: Other lengths available.
B614-6 5/8" x 14" 40 134 lbs.
B616-6 5/8" x 16" 40 151 lbs.
B618-6 5/8" x 18" 30 167 lbs.
B620-6 5/8" x 20" 30 184 lbs.
E-4
Fasteners - Bolts
Square Head Bolts

7/8" Square Head Bolts 1" Square Head (con't.)

B82-2 7/8" x 2" 50 83 lbs. B1020-6 1" x 20" 10 496 lbs.
B82-1/2-2 7/8" x 2-1/2" 50 91 lbs. B1022-6 1" x 22" 10 538 lbs.
B83-2
B84-2
7/8" x 3"
7/8" x 4"
50
50
93 lbs.
115 lbs.
B1024-6
B1026-6
1" x 24"
1" x 26"
10
10
581 lbs.
624 lbs. E
B85-2-1/2 7/8" x 5" 50 131 lbs. B1028-8 1" x 28" 5 667 lbs.
B86-2-1/2 7/8" x 6" 40 147 lbs. B1030-8 1" x 30" 5 710 lbs.
B88-3 7/8" x 8" 30 180 lbs.
B810-6 7/8" x 10" 25 212 lbs. 1-1/4" Square Head Bolts
B812-6 7/8" x 12" 20 244 lbs. B123-1/2-2 1-1/4" x 3-1/2" 20 259 lbs.
B814-6 7/8" x 14" 20 277 lbs. B124-2 1-1/4" x 4" 20 275 lbs.
B816-6 7/8" x 16" 15 309 lbs. B125-3 1-1/4" x 5" 20 308 lbs.
B818-6 7/8" x 18" 15 341 lbs. B126-3 1-1/4" x 6" 20 341 lbs.
B820-6 7/8" x 20" 15 373 lbs. B127-3 1-1/4" x 7" 15 374 lbs.
B822-6 7/8" x 22" 10 406 lbs. B128-3 1-1/4" x 8" 10 407 lbs.
B824-6 7/8" x 24" 10 438 lbs. B1210-4 1-1/4" x 10" 10 473 lbs.
B826-8 7/8" x 26" 10 470 lbs. B1212-6 1-1/4" x 12" 10 539 lbs.
B828-8 7/8" x 28" 10 503 lbs. B1214-6 1-1/4" x 14" 10 605 lbs.
B830-8 7/8" x 30" 10 535 lbs. B1216-6 1-1/4" x 16" 5 671 lbs.
B832-8 7/8" x 32" 10 570 lbs. B1218-6 1-1/4" x 18" 5 737 lbs.
B1220-6 1-1/4" x 20" 5 803 lbs.
1" Square Head Bolts
B1222-6 1-1/4" x 22" 5 869 lbs.
B103-2 1" x 3" 40 137 lbs. B1224-8 1-1/4" x 24" 5 935 lbs.
B103-1/2-2-1/2 1" x 3-1/2" 40 148 lbs.
B1226-8 1-1/4" x 26" 5 1000 lbs.
B104-2-3/4 1" x 4" 40 158 lbs.
B105-3 1" x 5" 30 179 lbs.
B106-2 1" x 6" 25 201 lbs.
B108-4 1" x 8" 25 243 lbs.
B1010-4 1" x 10" 20 285 lbs.
B1012-6 1" x 12" 15 327 lbs.
B1014-6 1" x 14" 15 369 lbs.
B1016-6 1" x 16" 10 412 lbs.
B1018-6 1" x 18" 10 454 lbs.
Note: Other lengths available.
E-5
Fasteners - Bolts
Hex Head Bolts

Dimension Table Width Hughes Brothers Hex Head Bolts are manufac-
Bolt Nominal Head tured in accordance with ANSI C135.1 and
ASTM A307, using SAE C1018 cold drawn or
Size Width Height
ASTM A36 steel. Hex head bolts are galvanized
3/8"
1/2"
9/16"
3/4"
1/4"
11/32"
HB in accordance with ASTM A153.
Each bolt is shipped with an assembled nut. All

5/8" 15/16" 27/64"
hex head bolts feature a 60 semi-cone point.
3/4" 1-1/8" 1/2"
Head Height
7/8" 1-5/16" 37/64"

The unthreaded portion of any hex bolt is ca-
1" 1-1/2" 43/64"
pable of being bent 180, about a diameter equal
1-1/4" 1-7/8" 27/32"
to the diameter of the bolt without cracking the
steel on the outside portion of the bend.
E
Shear Strengths for ANSI C135.1 Tensile Strengths for ANSI C135.1
Minimum
Bolt Single Shear Single Shear Bolt Tensile
Diameter Through Threads Through Shaft Diameter Strength
3/8" - - 3/8" 4,250 lbs.

1/2" 5,200 lbs. 7,950 lbs. 1/2" 7,800 lbs.
5/8" 8,330 lbs. 12,420 lbs. 5/8" 12,400 lbs.
3/4" 12,440 lbs. 17,890 lbs. 3/4" 18,350 lbs.
7/8" 17,270 lbs. 24,350 lbs. 7/8" 25,400 lbs.
1" 22,690 lbs. 31,800 lbs. 1" 33,500 lbs.
1-1/4" 36,590 lbs. 49,700 lbs. 1-1/4" 53,300 lbs.
Decimal
Equivalency
Chart
Ordering Information Fraction Decimal HUGHES
HB 7 1 6 - 6 1/4" .2 2
3/8" .3 3
Thread length in inches 1/2" .5 5
Bolt length in inches 5/8" .6 6
3/4" .7 7
7/8" .8 8
Designates hex head bolts 1" .1 10
1-1/8" 1.125 11
1-1/4" 1.25 12
E-6
Fasteners - Bolts
Hex Head Bolts
HB

1/2" Hex Head Bolts 3/4" Hex Head Bolts
HB51-1/2-1-1/4 1/2" x 1-1/2" 250 20 lbs. HB72-1-3/4 3/4" x 2" 100 56 lbs.
HB52-1-1/4 1/2" x 2" 250 23 lbs. HB72-1/2-1-3/4 3/4" x 2-1/2" 100 62 lbs.
HB52-1/2-1-1/4 1/2" x 2-1/2" 250 25 lbs. HB73-1-3/4 3/4" x 3" 100 68 lbs.
HB53-1-1/4 1/2" x 3" 250 28 lbs. HB74-2 3/4" x 4" 50 80 lbs.
HB53-1/2-1-1/4 1/2" x 3-1/2" 200 31 lbs. HB75-2 3/4" x 5" 50 91 lbs.
HB54-1-1/4 1/2" x 4"
HB54-1/2-1-1/4 1/2" x 4-1/2"
100
100
33 lbs.
36 lbs.
HB76-3
HB77-3
3/4" x 6"
3/4" x 7"
50
40
103 lbs.
115 lbs. E
HB55-1-3/4 1/2" x 5" 100 39 lbs. HB78-4 3/4" x 8" 40 127 lbs.
HB55-1/2-1-1/4 1/2" x 5-1/2" 100 41 lbs. HB710-4 3/4" x 10" 30 151 lbs.
HB56-3 1/2" x 6" 100 44 lbs. HB712-6 3/4" x 12" 30 175 lbs.
HB57-3 1/2" x 7" 100 49 lbs. HB714-6 3/4" x 14" 30 198 lbs.
HB58-4 1/2" x 8" 100 55 lbs. HB716-6 3/4" x 16" 25 222 lbs.
HB59-4 1/2" x 9" 50 60 lbs. HB718-6 3/4" x 18" 20 246 lbs.
HB510-4 1/2" x 10" 50 65 lbs. HB720-6 3/4" x 20" 20 270 lbs.
HB512-6 1/2" x 12" 50 76 lbs. HB722-6 3/4" x 22" 20 293 lbs.
HB514-6 1/2" x 14" 50 87 lbs. HB724-6 3/4" x 24" 15 317 lbs.
HB726-6 3/4" x 26" 15 341 lbs.
5/8" Hex Head Bolts HB728-8 3/4" x 28" 15 365 lbs.
HB61-1/2-1-1/4 5/8" x 1-1/2" 100 31 lbs. HB730-8 3/4" x 30" 10 390 lbs.
HB61-3/4-1-1/4 5/8" x 1-3/4" 100 33 lbs. HB732-8 3/4" x 32" 10 424 lbs.
HB62-1-1/2 5/8" x 2" 100 35 lbs.
HB63-1-1/2 5/8" x 3" 100 44 lbs.
HB64-1-1/2 5/8" x 4" 100 52 lbs.
HB65-1-1/2 5/8" x 5" 100 60 lbs. Note: Other lengths available.
HB66-1-1/2 5/8" x 6" 50 68 lbs.
HB67-3 5/8" x 7" 50 77 lbs.
HB68-4 5/8" x 8" 50 85 lbs.
HB610-4 5/8" x 10" 50 101 lbs.
HB612-6 5/8" x 12" 40 118 lbs.
HB614-6 5/8" x 14" 40 134 lbs.
HB616-6 5/8" x 16" 40 151 lbs.
HB618-6 5/8" x 18" 30 167 lbs.
HB620-6 5/8" x 20" 30 184 lbs.
E-7
Fasteners - Bolts
Hex Head Bolts
HB

7/8" Hex Head Bolts 1" Hex Head Bolts (con't.)
HB82-2 7/8" x 2" 50 83 lbs. HB1012-6 1" x 12" 15 327 lbs.
HB82-1/2-2 7/8" x 2-1/2" 50 91 lbs. HB1014-6 1" x 14" 15 369 lbs.
HB84-2 7/8" x 4" 50 115 lbs. HB1016-6 1" x 16" 10 412 lbs.
HB85-2-1/2
HB86-2-1/2
HB88-3
7/8" x 5"
7/8" x 6"
7/8" x 8"
50
40
30
131 lbs.
147 lbs.
180 lbs.
HB1018-6
HB1020-6
HB1022-6
1" x 18"
1" x 20"
1" x 22"
10
10
10
454 lbs.
496 lbs.
538 lbs.
E
HB810-6 7/8" x 10" 25 212 lbs. HB1024-6 1" x 24" 10 581 lbs.
HB812-6 7/8" x 12" 20 244 lbs. HB1026-6 1" x 26" 10 624 lbs.
HB814-6 7/8" x 14" 20 277 lbs. HB1028-8 1" x 28" 5 667 lbs.
HB816-6 7/8" x 16" 15 309 lbs. HB1030-8 1" x 30" 5 710 lbs.
HB818-6 7/8" x 18" 15 341 lbs.
HB820-6 7/8" x 20" 15 373 lbs. 1-1/4" Hex Head Bolts
HB822-6 7/8" x 22" 10 406 lbs. HB123-1/2-2 1-1/4" x 3-1/2" 20 259 lbs.
HB824-6 7/8" x 24" 10 438 lbs. HB124-2 1-1/4" x 4" 20 275 lbs.
HB826-8 7/8" x 26" 10 470 lbs. HB125-3 1-1/4" x 5" 20 308 lbs.
HB828-8 7/8" x 28" 10 503 lbs. HB126-3 1-1/4" x 6" 20 341 lbs.
HB830-8 7/8" x 30" 10 535 lbs. HB127-3 1-1/4" x 7" 15 374 lbs.
HB832-8 7/8" x 32" 10 570 lbs. HB128-3 1-1/4" x 8" 10 407 lbs.
HB1210-4 1-1/4" x 10" 10 473 lbs.
1" Hex Head Bolts HB1212-6 1-1/4" x 12" 10 539 lbs.
HB103-2 1" x 3" 40 137 lbs. HB1214-6 1-1/4" x 14" 10 605 lbs.
HB103-1/2-2-1/2 1" x 3-1/2" 40 148 lbs. HB1216-6 1-1/4" x 16" 5 671 lbs.
HB104-2-3/4 1" x 4" 40 158 lbs. HB1218-6 1-1/4" x 18" 5 737 lbs.
HB105-3 1" x 5" 30 179 lbs. HB1220-6 1-1/4" x 20" 5 803 lbs.
HB106-2 1" x 6" 25 201 lbs. HB1222-6 1-1/4" x 22" 5 869 lbs.
HB108-4 1" x 8" 25 243 lbs. HB1224-8 1-1/4" x 24" 5 935 lbs.
HB1010-4 1" x 10" 20 285 lbs. HB1226-8 1-1/4" x 26" 5 1000 lbs.
Note: Cold weather bolts are available under ASTM

A320 specifications. Cold weather bolts are Note: Other lengths available.
necessary only in the most extreme circum-
stances. To order cold weather bolts, substitute
an "FB" for the "B" prefix for all machine bolt
sizes.
E-8
Fasteners - Bolts
Type O Tower Bolts
Hughes Brothers Type O Tower Bolts are manufac-
tured in accordance with ASTM A394. Type O Tower
Bolts are hot dip galvanized in accordance with ASTM Bolt threads are unified coarse thread series and class
A153. Tower Bolts are shipped with an un-assembled 2A tolerance as defined in ANSI/ASME B1.1. Threads
hex nut. are cut to conform to the following:
Tensile Strengths Shear Strengths Threads

Minimum
Bolt Tensile Bolt Single Shear Single Shear Bolt Threads
Size Strength Size Through Threads Through Shaft Size Per Inch
1/2" 10,500 lbs. 1/2" 6,950 lbs. 9,000 lbs. 1/2" 13

5/8" 16,700 lbs. 5/8" 11,150 lbs. 14,100 lbs. 5/8" 11
3/4" 24,700 lbs. 3/4" 16,650 lbs. 20,250 lbs. 3/4" 10
7/8" 34,200 lbs. 7/8" 23,150 lbs. 27,600 lbs. 7/8" 9
1" 44,850 lbs. 1" 30,400 lbs. 36,050 lbs. 1" 8
Bolt Stock Numbers for Bolt Diameters

E
Dimension Table Length 1/2" 5/8" 3/4" 7/8" 1"
Bolt Nominal Head 1-1/4" BT51-1/4 BT61-1/4 BT71-1/4 BT81-1/4 BT101-1/4
Dia. Width Height 1-1/2" BT51-1/2 BT61-1/2 BT71-1/2 BT81-1/2 BT101-1/2
1-3/4" BT51-3/4 BT61-3/4 BT71-3/4 BT81-3/4 BT101-3/4
1/2" 3/4" 11/32" 2-1/4" BT52-1/4 BT62-1/4 BT72-1/4 BT82-1/4 BT102-1/4
5/8" 15/16" 27/64"
2-1/2" BT52-1/2 BT62-1/2 BT72-1/2 BT82-1/2 BT102-1/2
3/4" 1-1/8" 1/2"
7/8" 1-5/16" 37/64"
1" 1-1/2" 43/64"
Width
Bolt Length
T-O
Head Height
Length of full body
BT 6 4-1/2 - 3-1/4
Note: Full body is the distance Full body length in inches
from the underside of the Bolt length in inches
head to the first scratch of The first digit in decimal equiva-
threads. lent (see chart on previous pages)
Designates type "O" tower bolt
E-9
Fasteners - Bolts
Width
High Strength Bolts
Grade A325
A325
(Type 1 & Type 3)
Hughes Brothers High Strength Bolts are manufactured in
accordance with ASTM A325. All Type 1 high strength bolts
Head Height
are hot dip galvanized in accordance with ASTM A153.
Each bolt is shipped with an assembled nut. All high

strength bolts are hex head (see dimension table).
E
Dimension Table Tensile Strengths
Decimal
Minimum
Equivalency
Bolt Nominal Head Bolt Tensile
Chart
Size Width Height Diameter Strength
Fraction Decimal HUGHES
1/2" 7/8" 5/16" 1/2" 17,050 lbs. 1/4" .2 2
5/8" 1-1/16" 25/64" 5/8" 27,100 lbs. 3/8" .3 3
3/4" 1-1/4" 15/32" 3/4" 40,100 lbs. 1/2" .5 5
7/8" 1-7/16" 35/64" 7/8" 55,450 lbs. 5/8" .6 6
1" 1-5/8" 39/64" 1" 72,700 lbs. 3/4" .7 7
1-1/4" 2" 25/32" 1-1/4" 105,000 lbs. 7/8" .8 8
1" .1 10
1-1/8" 1.125 11
1-1/4" 1.25 12
AB 7 1 6 - 6 CT
Add suffix "CT" to get Type 3 bolt
The first digit in decimal equivalent (see chart)
Designates high strength bolts
E-10
Fasteners - Bolts
High Strength Bolts
A325

1/2" High Strength Bolts 3/4" High Strength Bolts

AB51-1/2-1 1/2" x 1-1/2" 250 20 lbs. AB72-1-3/8 3/4" x 2" 100 56 lbs.
AB52-1 1/2" x 2" 250 23 lbs. AB72-1/2-1-3/8 3/4" x 2-1/2" 100 62 lbs.
AB52-1/2-1 1/2" x 2-1/2" 250 25 lbs. AB73-1-3/8 3/4" x 3" 100 68 lbs.
AB53-1
AB53-1/2-1
1/2" x 3"
1/2" x 3-1/2"
250
200
28 lbs.
31 lbs.
AB74-1-3/8
AB75-1-3/8
3/4" x 4"
3/4" x 5"
50
50
80 lbs.
91 lbs. E
AB54-1 1/2" x 4" 100 33 lbs. AB76-1-3/8 3/4" x 6" 50 103 lbs.
AB54-1/2-1 1/2" x 4-1/2" 100 36 lbs. AB77-3 3/4" x 7" 40 115 lbs.
AB55-1 1/2" x 5" 100 39 lbs. AB78-4 3/4" x 8" 40 127 lbs.
AB55-1/2-1 1/2" x 5-1/2" 100 41 lbs. AB710-4 3/4" x 10" 30 151 lbs.
AB56-1 1/2" x 6" 100 44 lbs. AB712-4 3/4" x 12" 30 175 lbs.
AB57-3 1/2" x 7" 100 49 lbs. AB714-6 3/4" x 14" 30 198 lbs.
AB58-4 1/2" x 8" 100 55 lbs. AB716-6 3/4" x 16" 25 222 lbs.
AB59-4 1/2" x 9" 50 60 lbs. AB718-6 3/4" x 18" 20 246 lbs.
AB510-4 1/2" x 10" 50 65 lbs. AB720-6 3/4" x 20" 20 270 lbs.
AB512-4 1/2" x 12" 50 76 lbs. AB722-6 3/4" x 22" 20 293 lbs.
AB514-6 1/2" x 14" 50 87 lbs. AB724-6 3/4" x 24" 15 317 lbs.
AB726-6 3/4" x 26" 15 341 lbs.
5/8" High Strength Bolts AB728-8 3/4" x 28" 15 365 lbs.
AB61-1/2-1-1/4 5/8" x 1-1/2" 100 31 lbs. AB730-8 3/4" x 30" 10 390 lbs.
AB61-3/4-1-1/4 5/8" x 1-3/4" 100 33 lbs. AB732-8 3/4" x 32" 10 424 lbs.
AB62-1-1/4 5/8" x 2" 100 35 lbs.
AB63-1-1/4 5/8" x 3" 100 44 lbs.
AB64-1-1/4 5/8" x 4" 100 52 lbs.
AB65-1-1/4 5/8" x 5" 100 60 lbs.
AB66-1-1/4 5/8" x 6" 50 68 lbs.
AB67-3 5/8" x 7" 50 77 lbs. Note: Other lengths and specified thread lengths
AB68-4 5/8" x 8" 50 85 lbs. are available. Check with representatives or
AB610-4 5/8" x 10" 50 101 lbs. factory for availalbility.
AB612-4 5/8" x 12" 40 118 lbs.
AB614-6 5/8" x 14" 40 134 lbs.
AB616-6 5/8" x 16" 40 151 lbs.
AB618-6 5/8" x 18" 30 167 lbs.
AB620-6 5/8" x 20" 30 184 lbs.
E-11
Fasteners - Bolts
High Strength Bolts
A325

7/8" High Strength Bolts 1" High Strength Bolts (con't.)

AB82-1-1/2 7/8" x 2" 50 83 lbs. AB1010-4 1" x 10" 20 285 lbs.
AB82-1/2-1-1/2 7/8" x 2-1/2" 50 91 lbs. AB1012-4 1" x 12" 15 327 lbs.
AB84-1-1/2
AB85-1-1/2
AB86-1-1/2
7/8" x 4"
7/8" x 5"
7/8" x 6"
50
50
40
115 lbs.
131 lbs.
147 lbs.
AB1014-6
AB1016-6
AB1018-6
1" x 14"
1" x 16"
1" x 18"
15
10
10
369 lbs.
412 lbs.
454 lbs.
E
AB88-3 7/8" x 8" 30 180 lbs. AB1020-6 1" x 20" 10 496 lbs.
AB810-6 7/8" x 10" 25 212 lbs. AB1022-6 1" x 22" 10 538 lbs.
AB812-6 7/8" x 12" 20 244 lbs. AB1024-6 1" x 24" 10 581 lbs.
AB814-6 7/8" x 14" 20 277 lbs. AB1026-6 1" x 26" 10 624 lbs.
AB816-6 7/8" x 16" 15 309 lbs. AB1028-8 1" x 28" 5 667 lbs.
AB818-6 7/8" x 18" 15 341 lbs. AB1030-8 1" x 30" 5 710 lbs.
AB820-6 7/8" x 20" 15 373 lbs.
AB822-6 7/8" x 22" 10 406 lbs. 1-1/4" High Strength Bolts
AB824-6 7/8" x 24" 10 438 lbs. AB123-1/2-2 1-1/4" x 3-1/2" 20 259 lbs.
AB826-8 7/8" x 26" 10 470 lbs. AB124-2 1-1/4" x 4" 20 275 lbs.
AB828-8 7/8" x 28" 10 503 lbs. AB125-2 1-1/4" x 5" 20 308 lbs.
AB830-8 7/8" x 30" 10 535 lbs. AB126-2 1-1/4" x 6" 20 341 lbs.
AB832-8 7/8" x 32" 10 570 lbs. AB127-3 1-1/4" x 7" 15 374 lbs.
AB128-3 1-1/4" x 8" 10 407 lbs.
1" High Strength Bolts AB1210-4 1-1/4" x 10" 10 473 lbs.
AB103-1-3/4 1" x 3" 40 137 lbs. AB1212-6 1-1/4" x 12" 10 539 lbs.
AB103-1/2-1-3/4 1" x 3-1/2" 40 148 lbs. AB1214-6 1-1/4" x 14" 10 605 lbs.
AB104-1-3/4 1" x 4" 40 158 lbs. AB1216-6 1-1/4" x 16" 5 671 lbs.
AB105-1-3/4 1" x 5" 30 179 lbs. AB1218-6 1-1/4" x 18" 5 737 lbs.
AB106-1-3/4 1" x 6" 25 201 lbs. AB1220-6 1-1/4" x 20" 5 803 lbs.
AB108-4 1" x 8" 25 243 lbs. AB1222-6 1-1/4" x 22" 5 869 lbs.
AB1224-8 1-1/4" x 24" 5 935 lbs.
AB1226-8 1-1/4" x 26" 5 1000 lbs.
Note: Other lengths and specified thread lengths

are available. Check with representatives or
factory for availalbility.
E-12
Fasteners - Bolts
Washer Head Bolts

OD
Hughes Brothers Washer Head Bolts are manufactured

in accordance with ANSI C135.1 using SAE C1018
cold drawn or ASTM A36 steel. Washer head bolts are
hot dip galvanized in accordance with ASTM A153.
Dimension Table Each bolt is shipped with an assembled nut. All washer
head bolts are square head (see dimension table) and
Bolt Nominal Head O.D.
feature a 60 semi-cone point.
Size Width Height Nominal
The unthreaded portion of any washer head bolt is
1/2" 3/4" 21/64" 1-3/4"
5/8"
3/4"
15/16"
1-1/8"
27/64"
1/2"
2-5/8"
2-3/4"
capable of being bent 180, about a diameter equal to
the diameter of the bolt without cracking the steel on
the outside portion of the bend.
E
7/8" 1-5/16" 19/32" 3"
Decimal
Equivalency
Shear Strengths Tensile Strengths Chart
Minimum
Bolt Single Shear Single Shear Bolt Tensile Fraction Decimal HUGHES
Dia. Through Threads Through Shaft Diameter Strength 1/4" .2 2
3/8" .3 3
1/2" 5,200 lbs. 7,950 lbs. 1/2" 7,800 lbs. 1/2" .5 5
5/8" 8,330 lbs. 12,420 lbs. 5/8" 12,400 lbs. 5/8" .6 6
3/4" 12,440 lbs. 17,890 lbs. 3/4" 18,350 lbs. 3/4" .7 7
7/8" 17,270 lbs. 24,350 lbs. 7/8" 25,400 lbs. 7/8" .8 8
1" .1 10
1-1/8" 1.125 11
1-1/4" 1.25 12
WB 7 1 6 - 6
The first digit in decimal equivalent (see chart)
Designates washer head bolts
E-13
Fasteners - Bolts
Washer Head Bolts

1/2" Washer Head Bolts 3/4" Washer Head Bolts

WB51-1/2-1-1/4 1/2" x 1-1/2" 250 31 lbs. WB72-1-3/4 3/4" x 2" 100 86 lbs.
WB52-1-1/4 1/2" x 2" 250 34 lbs. WB72-1/2-1-3/4 3/4" x 2-1/2" 100 93 lbs.
WB52-1/2-1-1/2 1/2" x 2-1/2" 250 36 lbs. WB73-1-3/4 3/4" x 3" 50 99 lbs.
WB53-1-1/4 1/2" x 3"
WB53-1/2-1-1/2 1/2" x 3-1/2"
WB54-1-1/4 1/2" x 4"
250
200
100
38 lbs.
40 lbs.
45 lbs.
WB73-2
WB74-1-3/4
WB75-1-3/4
3/4" x 3"
3/4" x 4"
3/4" x 5"
50
50
40
99 lbs.
111 lbs.
123 lbs.
E
WB54-1/2-1-1/4 1/2" x 4-1/2" 100 47 lbs. WB76-3 3/4" x 6" 30 136 lbs.
WB55-1-1/4 1/2" x 5" 100 49 lbs. WB77-3 3/4" x 7" 25 148 lbs.
WB55-1/2-1-1/4 1/2" x 5-1/2" 100 51 lbs. WB78-4 3/4" x 8" 25 160 lbs.
WB56-3 1/2" x 6" 100 54 lbs. WB710-4 3/4" x 10" 25 185 lbs.
WB57-3 1/2" x 7" 100 58 lbs. WB712-6 3/4" x 12" 25 209 lbs.
WB58-4 1/2" x 8" 100 63 lbs. WB714-6 3/4" x 14" 20 234 lbs.
WB59-4 1/2" x 9" 50 67 lbs. WB716-6 3/4" x 16" 20 259 lbs.
WB510-4 1/2" x 10" 50 72 lbs. WB718-6 3/4" x 18" 15 283 lbs.
WB512-4 1/2" x 12" 50 81 lbs. WB720-6 3/4" x 20" 15 308 lbs.
WB514-6 1/2" x 14" 50 90 lbs. WB722-6 3/4" x 22" 15 332 lbs.
WB724-6 3/4" x 24" 15 357 lbs.
5/8" Washer Head Bolts WB726-6 3/4" x 26" 15 382 lbs.
WB61-1/2-1-1/4 5/8" x 1-1/2" 100 50 lbs. WB728-6 3/4" x 28" 10 406 lbs.
WB61-3/4-1-1/4 5/8" x 1-3/4" 100 52 lbs. WB730-8 3/4" x 30" 10 431 lbs.
WB62-1-1/2 5/8" x 2" 100 54 lbs. WB732-8 3/4" x 32" 10 455 lbs.
WB63-1-1/2 5/8" x 3" 100 63 lbs.
WB64-1-3/4 5/8" x 4" 50 71 lbs.
WB65-1-3/4 5/8" x 5" 50 80 lbs.
WB66-3` 5/8" x 6" 50 89 lbs.
WB67-3 5/8" x 7" 50 97 lbs.
WB68-4 5/8" x 8" 50 106 lbs. Note: Other lengths available.
WB610-4 5/8" x 10" 30 123 lbs.
WB612-4 5/8" x 12" 30 140 lbs.
WB614-6 5/8" x 14" 30 157 lbs.
WB616-6 5/8" x 16" 30 175 lbs.
WB618-6 5/8" x 18" 30 191 lbs.
WB620-6 5/8" x 20" 25 209 lbs.
E-14
Fasteners - Bolts
Washer Head Bolts

7/8" Washer Head Bolts 7/8" Washer Head Bolts

WB82-2 7/8" x 2" 50 108 lbs. WB816-6 7/8" x 16" 15 344 lbs.
WB82-1/2-2 7/8" x 2-1/2" 50 117 lbs. WB818-6 7/8" x 18" 15 378 lbs.
WB84-2 7/8" x 4" 50 142 lbs. WB820-6 7/8" x 20" 15 411 lbs.
WB85-2-1/2 7/8" x 5" 50 159 lbs. WB822-6 7/8" x 22" 10 445 lbs.
WB86-3 7/8" x 6" 40 175 lbs. WB824-6 7/8" x 24" 10 479 lbs.
WB88-3
WB810-3
7/8" x 8"
7/8" x 10"
25
25
209 lbs.
243 lbs.
WB826-8
WB828-8
7/8" x 26"
7/8" x 28"
10
10
513 lbs.
546 lbs.
E
WB812-6 7/8" x 12" 20 276 lbs. WB830-8 7/8" x 30" 10 580 lbs.
WB814-6 7/8" x 14" 15 310 lbs. WB832-8 7/8" x 32" 10 614 lbs.
Note: Other lengths available.
Thread Length
Carriage Bolts
Bolt Length
Bolt Thread Unit Bolt Thread Unit Bolt Thread Unit

Stock Length Length Wt. Stock Length Length Wt. Stock Length Length Wt.
No. Inches Inches Lbs. No. Inches Inches Lbs. No. Inches Inches Lbs.
3/8" Carriage Bolts* 1/2" Carriage Bolts 5/8" Carriage Bolts
BC32-F 2 Full .08 BC52-F 2 Full .14 BC61-1/2-F 1-1/2 Full .19
BC33-F 3 Full .10 BC52-1/2-F 2-1/2 Full .16 BC62-F 2 Full .24
BC34-F 4 Full .14 BC53-F 3 Full .17 BC64-F 4 Full .38
BC34-1/2-F 4-1/2 Full .13 BC54-F 4 Full .23 BC65-1/2-1-1/2 5-1/2 1-1/2 .46
BC35-F 5 Full .14 BC55-F 5 Full .30 BC66-F 6 Full .52
BC35-1/2-F 5-1/2 Full .16 BC55-1/2-1-1/2 5-1/2 1-1/2 .31 BC68-6 8 6 .58
BC36-F 6 Full .17 BC56-F 6 Full .32
BC37-6 7 6 .20 BC57-1-1/2 7 1-1/2 .41 3/4" Carriage Bolts
BC38-3 8 3 .25 BC58-F 8 Full .41 BC72-F 2 Full .46
BC73-1-3/4 3 1-3/4 .46
*3/8" Carriage Bolts include hex nuts.
E-15
Fasteners - Bolts
2719 Oval Eyebolt

Hughes Brothers Oval Eyebolts are manufactured in
accordance with ANSI C135.4. All oval eyebolts are hot
dip galvanized in accordance with ASTM A153. Oval
eyebolts are roll threaded and furnished assembled
with one nut.
B D
R MIN Thread Length
A
Length "L"
C
E
Bolt Dia. A B C D R Min
5/8" 1-1/2" 2" 2" 35/64" 5/16"
Minimum Tensile Strength 13,550 lbs.
Following ANSI C135.4 specifications, the unthreaded

portion of eyebolts are capable of being bent 180
about a diameter equal to the shank without cracking
the steel on the outside portion of the bend.
Stock Bolt Thread Weight
No. Length Length 100 Pcs.
Oval Eyebolts
2719.68-4 8" 4" 128 lbs.
2719.610-6 10" 6" 146 lbs.
2719.612-6 12" 6" 156 lbs.
2719.614-6 14" 6" 168 lbs.
2719.616-6 16" 6" 188 lbs.
2719.618-6 18" 6" 212 lbs.
E-16
Fasteners - Bolts
L 1-1/4"
T
2720 Shoulder
Eyebolt
Bolt Dia.
Stock Bolt Length Thread Weight

No. Dia. L T 100 Pcs. Hughes Brothers Welded Shoulder Eyebolts
feature a 3" round washer welded to an eyebolt.
1/2" Shoulder Eyebolts The 2720 shoulder eyebolts are manufactured from
2720.54-1-1/8 1/2" 4" 1-1/8" 102 lbs. SAE C1018 cold drawn or ASTM A36 steel. All
2720.55-1-1/4 1/2" 5" 1-1/4" 110 lbs. shoulder eyebolts are galvanized in accordance
2720.56-3 1/2" 6" 3" 118 lbs. with ASTM A153. Each shoulder eyebolt is fur-
2720.57-3 1/2" 7" 3" 126 lbs. nished with one nut.
2720.58-4
2720.510-4
1/2"
1/2"
8"
10"
4"
4"
134 lbs.
142 lbs. E
2720.512-4 1/2" 12" 4" 150 lbs.
Tensile Strengths
5/8" Shoulder Eyebolts Minimum
2720.64-3 5/8" 4" 3" 120 lbs. Bolt Tensile
2720.66-3 5/8" 6" 3" 168 lbs. Diameter Strength
2720.68-4 5/8" 8" 4" 192 lbs.
2720.610-4 5/8" 10" 4" 204 lbs. 1/2" 7,800 lbs.
2720.612-6 5/8" 12" 4" 216 lbs. 5/8" 12,400 lbs.
2720.614-6 5/8" 14" 6" 235 lbs. 3/4" 18,350 lbs.
2720.616-6 5/8" 16" 6" 240 lbs. 7/8" 25,400 lbs.
2720.618-6 5/8" 18" 6" 250 lbs.
2720.620-6 5/8" 20" 6" 268 lbs.
2720.622-6 5/8" 22" 6" 288 lbs.
2720.624-6 5/8" 24" 6" 308 lbs.
3/4" Shoulder Eyebolts

2720.74-3 3/4" 4" 3" 168 lbs.
2720.76-3 3/4" 6" 3" 200 lbs.
2720.78-4 3/4" 8" 4" 245 lbs.
2720.710-4 3/4" 10" 4" 270 lbs.
2720.712-6 3/4" 12" 4" 293 lbs.
2720.714-6 3/4" 14" 6" 320 lbs.
2720.716-6 3/4" 16" 6" 340 lbs.
2720.718-6 3/4" 18" 6" 360 lbs.
2720.720-6 3/4" 20" 6" 374 lbs.
2720.722-6 3/4" 22" 6" 396 lbs.
2720.724-6 3/4" 24" 6" 421 lbs.
2720.726-6 3/4" 26" 6" 443 lbs.
2720.728-8 3/4" 28" 8" 470 lbs.
E-17
Fasteners - Bolts
1-3/8" L
T 2721 Shoulder
Eyebolt
Bolt Dia.
Hughes Brothers 2721 Welded Shoulder Eyebolt has

Stock Bolt Length Thread Weight a 4" curved washer welded to an eyebolt. The 2721
No. Dia. L T 100 Pcs. shoulder eyebolts are manufactured from SAE
1/2" Shoulder Eyebolts C1018 cold drawn or ASTM A36 steel, and are
2721.54-1-1/8 1/2" 4" 1-1/8" 158 lbs. galvanized in accordance with ASTM A153. Each
2721.55-1-1/4 1/2" 5" 1-1/4" 166 lbs. 2721 shoulder eyebolt is furnished with one nut.
2721.56-3 1/2" 6" 3" 174 lbs.
2721.57-3
2721.58-4
2721.510-4
1/2"
1/2"
1/2"
7"
8"
10"
3"
4"
4"
182 lbs.
190 lbs.
198 lbs.
Tensile Strengths
E
2721.512-4 1/2" 12" 4" 206 lbs.
Minimum
5/8" Shoulder Eyebolts Bolt Tensile
2721.64-3 5/8" 4" 3" 198 lbs. Diameter Strength
2721.65-3 5/8" 5" 3" 212 lbs.
2721.66-3 5/8" 6" 3" 225 lbs.
1/2" 7,800 lbs.
2721.68-4 5/8" 8" 4" 232 lbs.
2721.610-4 5/8" 10" 4" 242 lbs. 5/8" 12,400 lbs.
2721.612-4 5/8" 12" 4" 262 lbs. 3/4" 18,350 lbs.
2721.614-6 5/8" 14" 6" 282 lbs. 7/8" 25,400 lbs.
2721.616-6 5/8" 16" 6" 299 lbs.
2721.618-6 5/8" 18" 6" 315 lbs.
2721.620-6 5/8" 20" 6" 325 lbs.
2721.622-6 5/8" 22" 6" 350 lbs.
2721.624-6 5/8" 24" 6" 366 lbs. Stock Bolt Length Thread Weight
No. Dia. L T 100 Pcs.
3/4" Shoulder Eyebolts 7/8" Shoulder Eyebolts
2721.76-3 3/4" 6" 3" 249 lbs. 2721.86-3 7/8" 6" 3" 316 lbs.
2721.78-4 3/4" 8" 4" 276 lbs. 2721.88-4 7/8" 8" 4" 350 lbs.
2721.710-4 3/4" 10" 4" 303 lbs. 2721.810-4 7/8" 10" 4" 386 lbs.
2721.712-4 3/4" 12" 4" 330 lbs. 2721.812-6 7/8" 12" 6" 414 lbs.
2721.714-6 3/4" 14" 6" 357 lbs. 2721.814-6 7/8" 14" 6" 479 lbs.
2721.716-6 3/4" 16" 6" 384 lbs. 2721.816-6 7/8" 16" 6" 486 lbs.
2721.718-6 3/4" 18" 6" 411 lbs. 2721.818-6 7/8" 18" 6" 519 lbs.
2721.720-6 3/4" 20" 6" 438 lbs. 2721.820-6 7/8" 20" 6" 557 lbs.
2721.722-6 3/4" 22" 6" 465 lbs. 2721.822-6 7/8" 22" 6" 570 lbs.
2721.724-6 3/4" 24" 6" 492 lbs. 2721.824-6 7/8" 24" 6" 600 lbs.
2721.726-6 3/4" 26" 6" 519 lbs. 2721.826-8 7/8" 26" 8" 653 lbs.
2721.728-8 3/4" 28" 8" 546 lbs. 2721.828-8 7/8" 28" 8" 684 lbs.
E-18
Fasteners - Bolts
B T 2724 Forged
Eyebolt
C Bolt Dia.
L Hughes Brothers 2724 Forged Eyebolts are

Tensile Strengths manufactured from SAE C1018 cold drawn
or ASTM A36 steel. Hughes Brothers
Minimum eyebolts are hot dip galvanized in accor-
Bolt Tensile dance with ASTM A153. Each 2724 shoul-
Diameter Strength der eyebolt is furnished with one nut.
1/2" 7,800 lbs.
5/8" 12,400 lbs.
Also available in 1" and 1-1/4" diameter rod
3/4" 18,350 lbs. by special order.
Stock
7/8"
Bolt
25,400 lbs.
Weight Stock Bolt Weight

E
No. Dia. L T B C 100 Pcs. No. Dia. L T B C 100 Pcs.
1/2" Forged Eyebolts 3/4" Forged Eyebolts
2724.56-4 1/2" 6" 4" 11/16" 1-1/4" 39 lbs. 2724.74-2 3/4" 4" 2" 13/16" 1-7/8" 80 lbs.
2724.58-4 1/2" 8" 4" 11/16" 1-1/4" 51 lbs. 2724.75-3 3/4" 5" 3" 13/16" 1-7/8" 88 lbs.
2724.510-4 1/2" 10" 4" 11/16" 1-1/4" 62 lbs. 2724.76-3 3/4" 6" 3" 13/16" 1-7/8" 105 lbs.
2724.512-4 1/2" 12" 4" 11/16" 1-1/4" 73 lbs. 2724.77-3 3/4" 7" 3" 13/16" 1-7/8" 116 lbs.
2724.514-4 1/2" 14" 4" 11/16" 1-1/4" 84 lbs. 2724.78-4 3/4" 8" 4" 13/16" 1-7/8" 128 lbs.
2724.516-4 1/2" 16" 4" 11/16" 1-1/4" 95 lbs. 2724.710-4 3/4" 10" 4" 13/16" 1-7/8" 150 lbs.
2724.518-4 1/2" 18" 4" 11/16" 1-1/4" 107 lbs. 2724.712-4 3/4" 12" 4" 13/16" 1-7/8" 175 lbs.
2724.520-4 1/2" 20" 4" 11/16" 1-1/4" 117 lbs. 2724.714-6 3/4" 14" 6" 13/16" 1-7/8" 199 lbs.
2724.716-6 3/4" 16" 6" 13/16" 1-7/8" 219 lbs.
5/8" Forged Eyebolts 2724.718-6 3/4" 18" 6" 13/16" 1-7/8" 246 lbs.
2724.64-2 5/8" 4" 2" 13/16" 1-5/8" 48 lbs. 2724.720-6 3/4" 20" 6" 13/16" 1-7/8" 271 lbs.
2724.64-3 5/8" 4" 3" 13/16" 1-5/8" 48 lbs. 2724.722-6 3/4" 22" 6" 13/16" 1-7/8" 295 lbs.
2724.65-3 5/8" 5" 3" 13/16" 1-5/8" 60 lbs. 2724.724-6 3/4" 24" 6" 13/16" 1-7/8" 321 lbs.
2724.66-3 5/8" 6" 3" 13/16" 1-5/8" 68 lbs. 2724.726-8 3/4" 26" 8" 13/16" 1-7/8" 345 lbs.
2724.68-4 5/8" 8" 4" 13/16" 1-5/8" 85 lbs. 2724.728-8 3/4" 28" 8" 13/16" 1-7/8" 369 lbs.
2724.610-4 5/8" 10" 4" 13/16" 1-5/8" 101 lbs.
2724.612-4 5/8" 12" 4" 13/16" 1-5/8" 124 lbs. 7/8" Forged Eyebolts
2724.614-6 5/8" 14" 6" 13/16" 1-5/8" 132 lbs. 2724.85-3 7/8" 5" 3" 15/16" 2-1/8" 108 lbs.
2724.616-6 5/8" 16" 6" 13/16" 1-5/8" 150 lbs. 2724.86-3 7/8" 6" 3" 15/16" 2-1/8" 126 lbs.
2724.618-6 5/8" 18" 6" 13/16" 1-5/8" 167 lbs. 2724.87-3 7/8" 7" 3" 15/16" 2-1/8" 145 lbs.
2724.620-6 5/8" 20" 6" 13/16" 1-5/8" 187 lbs. 2724.88-4 7/8" 8" 4" 15/16" 2-1/8" 163 lbs.
2724.622-6 5/8" 22" 6" 13/16" 1-5/8" 200 lbs. 2724.810-4 7/8" 10" 4" 15/16" 2-1/8" 201 lbs.
2724.624-6 5/8" 24" 6" 13/16" 1-5/8" 220 lbs. 2724.812-4 7/8" 12" 4" 15/16" 2-1/8" 237 lbs.
2724.626-8 5/8" 26" 8" 13/16" 1-5/8" 236 lbs. 2724.814-6 7/8" 14" 6" 15/16" 2-1/8" 276 lbs.
2724.628-8 5/8" 28" 8" 13/16" 1-5/8" 252 lbs. 2724.816-6 7/8" 16" 6" 15/16" 2-1/8" 308 lbs.
2724.630-8 5/8" 30" 8" 13/16" 1-5/8" 268 lbs. 2724.818-6 7/8" 18" 6" 15/16" 2-1/8" 344 lbs.
2724.632-8 5/8" 32" 8" 13/16" 1-5/8" 289 lbs. 2724.820-6 7/8" 20" 6" 15/16" 2-1/8" 379 lbs.
2724.634-8 5/8" 34" 8" 13/16" 1-5/8" 307 lbs. 2724.822-6 7/8" 22" 6" 15/16" 2-1/8" 407 lbs.
2724.824-6 7/8" 24" 6" 15/16" 2-1/8" 452 lbs.
2724.826-8 7/8" 26" 8" 15/16" 2-1/8" 467 lbs.
E-19
Fasteners - Threaded Rods
Threaded Rods
(Double Arming Bolts)
Hughes Brothers Threaded Rods are manufactured in

Shear Strengths for ANSI C135.1 accordance with ANSI C135.1 and ASTM A307, using
ASTM A36 or SAE C1018 cold drawn steel. The
Bolt Single Shear Single Shear threaded rods are hot dip galvanized in accordance
Diameter Through Threads Through Shaft with ASTM A153. Various ordering options are avail-
able for full thread, or any portion of thread. Standard
1/2"
5/8"
3/4"
5,200
8,330
12,440
lbs.
lbs.
lbs.
7,950
12,420
17,890
lbs.
lbs.
lbs.
thread length options are listed. Threaded rod with
partial threads are furnished with one nut on each end
unless otherwise specified. Full threaded rod (double
E
7/8" 17,270 lbs. 24,350 lbs. arming bolts) are furnished with 4 nuts unless other-
1" 22,690 lbs. 31,800 lbs. wise specified. The suffix "2N" designates only 2 nuts
1-1/4" 36,590 lbs. 49,700 lbs. for full threaded rod.
Tensile Strengths for ANSI C135.1 Decimal

Minimum Equivalency
Bolt Tensile Chart
Diameter Strength Fraction Decimal HUGHES
1/2" 7,800 lbs. 1/4" .2 2

5/8" 12,400 lbs. 3/8" .3 3
3/4" 18,350 lbs. 1/2" .5 5
7/8" 25,400 lbs. 5/8" .6 6
1" 33,500 lbs. 3/4" .7 7
1-1/4" 53,300 lbs. 7/8" .8 8
1" .1 10
1-1/8" 1.125 11
1-1/4" 1.25 12
TR 7 1 6 - F 2N Designates only 2 nuts (full threaded rod only).
Without the "2N" suffix, 4 nuts are always supplied on full threaded
rod, or "NN" designates no nuts.
Designates full threads
Bolt length, in 2" increments
Designates threaded rod
E-20
Full Threaded Rods

1/2" Full Threaded Rods 7/8" Full Threaded Rods
TR512-F 1/2" x 12" 50 75 lbs. TR812-F 7/8" x 12" 20 262 lbs.
TR514-F 1/2" x 14" 50 84 lbs. TR814-F 7/8" x 14" 20 291 lbs.
TR516-F 1/2" x 16" 50 94 lbs. TR816-F 7/8" x 16" 15 320 lbs.
TR520-F 1/2" x 20" 50 112 lbs. TR818-F 7/8" x 18" 15 349 lbs.
TR522-F
TR524-F
1/2" x 22"
1/2" x 24"
50
50
121 lbs.
130 lbs.
TR820-F
TR822-F
7/8" x 20"
7/8" x 22"
15
15
378 lbs.
406 lbs.
E
TR824-F 7/8" x 24" 10 435 lbs.
5/8" Full Threaded Rods TR826-F 7/8" x 26" 10 464 lbs.
TR612-F 5/8" x 12" 25 125 lbs. TR828-F 7/8" x 28" 10 493 lbs.
TR614-F 5/8" x 14" 25 139 lbs. TR830-F 7/8" x 30" 10 522 lbs.
TR616-F 5/8" x 16" 25 154 lbs. TR832-F 7/8" x 32" 10 551 lbs.
TR620-F 5/8" x 20" 25 182 lbs. TR834-F 7/8" x 34" 10 580 lbs.
TR622-F 5/8" x 22" 25 196 lbs. TR836-F 7/8" x 36" 10 609 lbs.
TR624-F 5/8" x 24" 25 211 lbs. TR838-F 7/8" x 38" 10 638 lbs.
TR840-F 7/8" x 40" 5 667 lbs.
3/4" Full Threaded Rods TR842-F 7/8" x 42" 5 696 lbs.
TR712-F 3/4" x 12" 30 180 lbs.
TR714-F 3/4" x 14" 30 205 lbs.
TR716-F 3/4" x 16" 25 221 lbs.
TR718-F 3/4" x 18" 25 242 lbs.
TR720-F 3/4" x 20" 20 262 lbs.
TR722-F 3/4" x 22" 20 283 lbs.
TR724-F 3/4" x 24" 15 304 lbs.
TR726-F 3/4" x 26" 15 325 lbs.
TR728-F 3/4" x 28" 15 346 lbs.
TR730-F 3/4" x 30" 15 366 lbs.
TR732-F 3/4" x 32" 10 387 lbs.
TR734-F 3/4" x 34" 10 408 lbs.
TR736-F 3/4" x 36" 10 429 lbs.
TR738-F 3/4" x 38" 10 449 lbs.
TR740-F 3/4" x 40" 10 470 lbs.
TR742-F 3/4" x 42" 10 491 lbs.
E-21
Full Threaded Rods

1" Full Threaded Rods 1-1/4" Full Threaded Rods

TR1012-F 1" x 12" 15 356 lbs. TR1212-F 1-1/4" x 12" 10 468 lbs.
TR1014-F 1" x 14" 15 392 lbs. TR1214-F 1-1/4" x 14" 10 538 lbs.
TR1016-F 1" x 16" 15 431 lbs. TR1216-F 1-1/4" x 16" 10 607 lbs.
TR1018-F
TR1020-F
TR1022-F
1" x 18"
1" x 20"
1" x 22"
10
10
10
468 lbs.
506 lbs.
544 lbs.
TR1218-F
TR1220-F
TR1222-F
1-1/4" x 18"
1-1/4" x 20"
1-1/4" x 22"
5
5
5
677 lbs.
747 lbs.
817 lbs.
E
TR1024-F 1" x 24" 10 581 lbs. TR1224-F 1-1/4" x 24" 5 887 lbs.
TR1026-F 1" x 26" 10 619 lbs. TR1226-F 1-1/4" x 26" 5 956 lbs.
TR1028-F 1" x 28" 5 656 lbs. TR1228-F 1-1/4" x 28" 5 1026 lbs.
TR1030-F 1" x 30" 5 694 lbs. TR1230-F 1-1/4" x 30" 5 1096 lbs.
TR1032-F 1" x 32" 5 732 lbs. TR1232-F 1-1/4" x 32" 5 1166 lbs.
TR1034-F 1" x 34" 5 769 lbs. TR1234-F 1-1/4" x 34" 5 1236 lbs.
TR1036-F 1" x 36" 5 807 lbs. TR1236-F 1-1/4" x 36" 5 1305 lbs.
TR1038-F 1" x 38" 5 844 lbs. TR1238-F 1-1/4" x 38" 4 1375 lbs.
TR1040-F 1" x 40" 5 882 lbs. TR1240-F 1-1/4" x 40" 4 1445 lbs.
TR1042-F 1" x 42" 5 920 lbs. TR1242-F 1-1/4" x 42" 4 1515 lbs.
E-22
Fasteners -Threaded Rods
Threaded Double End Rods

5/8" Threaded Double End Rods 7/8" Threaded Double End Rods
TR612-5 5/8" x 12" 30 136 lbs. TR812-5 7/8" x 12" 20 222 lbs.
TR614-5 5/8" x 14" 30 142 lbs. TR814-5 7/8" x 14" 20 256 lbs.
TR616-5 5/8" x 16" 25 160 lbs. TR816-5 7/8" x 16" 15 290 lbs.
TR618-5 5/8" x 18" 25 173 lbs. TR818-5 7/8" x 18" 15 324 lbs.
TR620-5 5/8" x 20" 20 187 lbs. TR820-5 7/8" x 20" 15 358 lbs.
TR622-5 5/8" x 22" 20 204 lbs. TR822-5 7/8" x 22" 15 392 lbs.
TR624-5
TR626-5
5/8" x 24"
5/8" x 26"
15
15
224 lbs.
236 lbs.
TR824-5
TR826-5
7/8" x 24"
7/8" x 26"
10
10
425 lbs.
455 lbs. E
TR628-5 5/8" x 28" 15 256 lbs. TR828-5 7/8" x 28" 10 493 lbs.
TR630-5 5/8" x 30" 15 264 lbs. TR830-5 7/8" x 30" 10 527 lbs.
TR632-5 5/8" x 32" 10 284 lbs. TR832-5 7/8" x 32" 10 561 lbs.
TR634-5 5/8" x 34" 10 298 lbs. TR834-5 7/8" x 34" 10 595 lbs.
TR636-5 5/8" x 36" 10 325 lbs. TR836-5 7/8" x 36" 10 629 lbs.
TR638-5 5/8" x 38" 10 339 lbs. TR838-5 7/8" x 38" 10 662 lbs.
TR640-5 5/8" x 40" 10 351 lbs. TR840-5 7/8" x 40" 10 696 lbs.
TR642-5 5/8" x 42" 10 365 lbs. TR842-5 7/8" x 42" 10 730 lbs.
3/4" Threaded Double End Rods

TR712-5 3/4" x 12" 30 196 lbs.
TR714-5 3/4" x 14" 30 220 lbs.
TR716-5 3/4" x 16" 25 240 lbs. Note: The last digit of the stock number indicates the
TR718-5 3/4" x 18" 25 252 lbs. standard thread length at each end of the
TR720-5 3/4" x 20" 20 275 lbs. threaded double end rods.
TR722-5 3/4" x 22" 20 300 lbs. Threaded double end rods are furnished with two
TR724-5 3/4" x 24" 15 313 lbs. square nuts.
TR726-5 3/4" x 26" 15 336 lbs.
TR728-5 3/4" x 28" 15 362 lbs.
TR730-5 3/4" x 30" 15 388 lbs.
TR732-5 3/4" x 32" 10 414 lbs.
TR734-5 3/4" x 34" 10 440 lbs.
TR736-5 3/4" x 36" 10 465 lbs.
TR738-5 3/4" x 38" 10 491 lbs.
TR740-5 3/4" x 40" 10 517 lbs.
TR742-5 3/4" x 42" 10 543 lbs.
E-23
Fasteners -Threaded Rods
Threaded Double End Rods

1" Threaded Double End Rods 1-1/4" Threaded Double End Rods
TR1012-5 1" x 12" 15 297 lbs. TR1212-6 1-1/4" x 12" 10 468 lbs.
TR1014-5 1" x 14" 15 341 lbs. TR1214-6 1-1/4" x 14" 10 538 lbs.
TR1016-5 1" x 16" 15 385 lbs. TR1216-6 1-1/4" x 16" 10 607 lbs.
TR1018-5 1" x 18" 15 429 lbs. TR1218-6 1-1/4" x 18" 5 677 lbs.
TR1020-5 1" x 20" 10 473 lbs. TR1220-6 1-1/4" x 20" 5 747 lbs.
TR1022-5 1" x 22" 10 517 lbs.
TR1024-5
TR1026-5
1" x 24"
1" x 26"
10
10
561 lbs.
605 lbs.
TR1222-6
TR1224-6
TR1226-6
1-1/4" x 22"
1-1/4" x 24"
1-1/4" x 26"
5
5
5
817 lbs.
887 lbs.
956 lbs.
E
TR1028-5 1" x 28" 5 649 lbs. TR1228-6 1-1/4" x 28" 5 1026 lbs.
TR1030-6 1" x 30" 5 693 lbs. TR1230-6 1-1/4" x 30" 5 1096 lbs.
TR1032-6 1" x 32" 5 737 lbs. TR1232-6 1-1/4" x 32" 5 1166 lbs.
TR1034-6 1" x 34" 5 781 lbs. TR1234-6 1-1/4" x 34" 5 1236 lbs.
TR1036-6 1" x 36" 5 825 lbs. TR1236-6 1-1/4" x 36" 5 1305 lbs.
TR1038-6 1" x 38" 5 869 lbs. TR1238-6 1-1/4" x 38" 4 1375 lbs.
TR1040-6 1" x 40" 5 913 lbs. TR1240-6 1-1/4" x 40" 4 1445 lbs.
TR1042-6 1" x 42" 5 957 lbs. TR1242-6 1-1/4" x 42" 4 1515 lbs.
Note: The last digit of the stock number indicates the Threaded double end rods are furnished with two
standard thread length at each end of the square nuts.
threaded double end rods.
Chain Links
Hughes Brothers Chain Links are formed from ASTM A36 steel.
B
A Stock Weight
No. Dia. A B 100 Pcs.
1329-B 5/8" 1" 3" 73 lbs.
1329-B1 1/2" 1" 2-1/4" 41 lbs.
1329-B3 9/16" 1" 3" 59 lbs.
a.
Di
E-24
Fasteners - U-Bolts/Links
U-Bolts
Hughes Brothers U-Bolts are used primarily on steel angle H-frame cross ties.
A
Stock Bolt Weight
No. Dia. A B C R 100 Pcs.
U-Bolt without Nuts
1327 5/8" 3" 4-1/8" 2" 1-3/16" 76 lbs.
C 1328-A 1/2" 1-1/2" 3" 1-1/2" 1/2" 50 lbs.
1328-B 1/2" 1-1/2" 2-1/2" 1-3/4" 1/2" 50 lbs.
1327-A 5/8" 3" 5-1/8" 3" 1-3/16" 76 lbs.
1329-A* 5/8" 2" 3-3/4" 2" 11/16" 66 lbs.
B
1330-A 5/8" 1-1/2" 3-5/8" 2" 7/16" 63 lbs.
R U-Bolt, with 4 nuts and 2 locknuts

1327-CPT 5/8" 3" 3-1/2" 2" 1-3/16" 114 lbs.
1328-A-CPT 1/2" 1-1/2" 2-1/2" 1-1/2" 1/2" 116 lbs.
1328-B-CPT 1/2" 1-1/2" 2-1/2" 1-3/4" 1/2" 116 lbs.
DIA
1327-A-CPT
1329-A-CPT*
1330-A-CPT
5/8"
5/8"
5/8"
3"
2"
1-1/2"
4-1/2"
3-1/8"
3"
3"
2"
2"
1-3/16"
11/16"
7/16"
132 lbs.
116 lbs.
96 lbs.
E
DIA *Uses square nuts.
Stock No. Dia. "A" "B" "C" Pipe / Conduit Size
Large U-bolt U-Bolt, with 2 hex nuts & 2 split lock washers (for conduit support brackets)
shown here in AS2477.2 3/8" 2-7/8" 3-1/4" 2-1/4" 2"
conduit support AS2477.3 3/8" 7" 7-3/4" 4" 6"
AS2477.5 3/8" 6" 6-1/2" 3-1/4" 5"
B
bracket
AS2477.6 3/8" 4-3/4" 5-1/2" 3" 4"
application
C
B1964.1A 1/2" 3-1/4" 4" 2-5/8" 2"

B1964.1B 1/2" 5" 6" 3" 4"
B1964.1C 1/2" 7" 8" 4" 6"
1329 U-Bolt &

Chain Link Assembly
To order Hughes Brothers 1329 U-Bolt and Chain
Link Assembly, specify the following:
Stock Item Weight

No. Description 100 Pcs.
1329.5 5/8" U-Bolt & 1/2" Link Assembly 160 lbs.
1329.6 5/8" U-Bolt & 5/8" Link Assembly 190 lbs.
E-25
Fasteners - Clips
Max.
Stock
No.
Bolt
Dia.
Wire
Dia.
Std.
Pkg.
Weight
100 Pcs.
2718 Bonding Clip
The Hughes Brothers 2718 Bonding Clip is used to
2718.3 3/8" 7/16" 250 8 lbs.
attach the ground wire to any flat steel surface. The
2718.5 1/2" 7/16" 250 9 lbs.
mounting bolt is not included, unless specified.
2718.6 5/8" 7/16" 250 19 lbs.
2718.7 3/4" 7/16" 250 18 lbs.
2718.8 7/8" 7/16" 250 18 lbs.
2718.10 1" 7/16" 250 16 lbs.
2718.33* 3/8"x1-1/2" 7/16" 250 19 lbs.

2718.55* 1/2"x1-1/2" 7/16" 200 29 lbs.
2718.66* 5/8"x1-3/4" 7/16" 100 53 lbs.
*Includes bonding clip, carriage bolt, nut, and locknut.
Max. 2727 Bonding Clip E

Stock Bolt Wire Std. Weight The Hughes Brothers 2727 Bonding Clip provides a
No. Dia. Dia. Pkg. 100 Pcs. simple and practical method of bonding the threaded
end of bolts. Nut ordered separately.
2727.5 1/2" 5/16" 500 10 lbs.
2727.6 5/8" 5/16" 500 10 lbs.
2727.7 3/4" 5/16" 250 14 lbs.
2727.8 7/8" 5/16" 250 20 lbs.
2727.10 1" 7/16" 150 26 lbs.
2727.12 1-1/4" 7/16" 150 26 lbs.
GWB 51-1/2 Bonding Bolt

The Hughes Brothers Ground Wire Bonding Bolt is a simple
method of attaching the ground wire to a flat steel surface. The
lipped washer is an integral part of the bolt, acting as a clamp to
hold the ground wire securely in place.
Max.
Stock Bolt Wire Std. Weight
No. Dia. Length Dia. Pkg. 100 Pcs.
GWB51-1/2 1/2" 1-1/2" 7/16" 200 32 lbs.
E-26
Fasteners - Studs
2722 Bent Bolt & Stud

Hughes Brothers 2722 Bent Bolts and Bent Studs are
used primarily for connecting transmission braces to
spacer fittings in transmission double arm assemblies.
They are manufactured from SAE C1018 cold drawn or
ASTM A36 steel. All bent bolts and bent studs are
galvanized in accordance with ASTM A153.
Each bent bolt is furnished with a nut and locknut.

Each bent stud is furnished with two nuts and two
locknuts.
2722 Bent Bolt

E
L
2722 Bent Stud
Stock Item Length Bend Full Body Weight

No. Description L Radius Length 100 Pcs.
Bent Bolts
2722.1A-B 3/4" Bent Bolt 6" 3-3/8" 2-3/4" 109 lbs.
2722.1B-B 7/8" Bent Bolt 6" 3-3/8" 2-3/4" 158 lbs. Tensile Strengths and Shear Strengths
2722.2A* 7/8" Bent Bolt 7-1/2" 3-3/8" 4-1/4" 182 lbs. of Hughes Brothers 2722 Bent Bolts and
Bent Studs conform to ANSI C135.1.
Bent Studs
2722.1C-B 3/4" Bent Stud 8" 3-3/8" 2-1/2" 133 lbs.
2722.1D-B 7/8" Bent Stud 8" 3-3/8" 2-1/2" 182 lbs.
2722.2B* 7/8" Bent Stud 10" 3-3/8" 4-1/2" 230 lbs. *RUS accepted item - features recessed nut.
E-27
Fasteners - Studs
Insulator Mounting Studs

Hughes Brothers Insulator Mounting Studs are manufactured in
accordance with ANSI C135.1. The insulator mounting studs are
threaded to diameters specified in ANSI CZ9.7 and are galvanized
in accordance with ASTM A153.
Insulator mounting studs are furnished assembled with hardware as

shown. Tensile strengths of Hughes Brothers insulator mounting
studs are the same as the tensile strengths of Hughes Brothers
machine bolts. (See page E-3.)
The serrated collar and lock washer ensure a tight hardware con-
nection. Longer studs, for wood crossarms feature a wrench shoul-
der below the serrated collar.
E
For Use on Steel
L
A B
1" 1/2"
Stock Weight
No. "L" "T" "A" "B" 100 Pcs.
2750.1A 2-7/8" 1-3/4" 3/4" 5/8" 43 lbs.

2750.2A 2-1/4" 1-1/8" 3/4" 5/8" 37 lbs.
2750.4A 3-5/8" 2-1/2" 3/4" 5/8" 51 lbs.
2751.1A 3" 1-7/8" 3/4" 3/4" 63 lbs.

2751.3A 3-7/8" 2-3/4" 3/4" 3/4" 73 lbs.
2751.4A 3-1/2" 2-3/8" 3/4" 3/4" 68 lbs.
2755.1A 3-3/16" 2" 7/8" 7/8" 63 lbs.

2755.3A 4-3/16" 3" 7/8" 7/8" 73 lbs.
2755.4A 5-3/16" 4" 7/8" 7/8" 68 lbs.
Standard Package: 100
E-28
Fasteners - Studs
Insulator Mounting Studs
For Use on Wood L
T
A B
1" 1/2"
Stock Weight
No. "L" "T" "A" "B" 100 Pcs.
2752 Mounting Studs
2752.1A 7"
2752.2A 7-1/2"
4"
6"
3/4"
3/4"
5/8"
5/8"
118 lbs.
121 lbs.
E
2752.3A 8" 6" 3/4" 5/8" 125 lbs.
2752.4A 9" 6" 3/4" 5/8" 132 lbs.
2752.5A 10" 6" 3/4" 5/8" 139 lbs.
2752.6A 11" 6" 3/4" 5/8" 146 lbs.
2752.7A 14" 6" 3/4" 5/8" 167 lbs.
2752.8A 16" 6" 3/4" 5/8" 181 lbs.
2752.9A 12" 6" 3/4" 5/8" 153 lbs.
2753 Mounting Studs

2753.1A 7" 4" 3/4" 3/4" 140 lbs.
2753.2A 8" 6" 3/4" 3/4" 152 lbs.
2753.3A 9" 6" 3/4" 3/4" 163 lbs.
2753.4A 10" 6" 3/4" 3/4" 172 lbs.
2753.5A 11" 6" 3/4" 3/4" 183 lbs.
2753.6A 12" 6" 3/4" 3/4" 194 lbs.
2753.7A 14" 6" 3/4" 3/4" 214 lbs.
2753.8A 16" 6" 3/4" 3/4" 234 lbs.
2754 Mounting Studs

2754.1A 7-1/2" 4" 7/8" 7/8" 168 lbs.
2754.2A 8" 4" 7/8" 7/8" 175 lbs.
E-29
Fasteners - Bolts
Anchor Bolts
Hughes Brothers Anchor Bolts are manufactured from SAE
C1018 cold drawn or ASTM A36 steel. The threads meet
ANSI / ASME B1.1 specifications. The minimum bend radius
is equal to the diameter of the anchor bolt.
E
Y
ANB1036-8B6G20
Galvanizing length (G) from threaded end,
in inches, or F for fully galvanized
Bend length (Y) in inches
Thread length (T) in inches
Rod length (X) in inches
Rod diameter (see table)
Designates anchor bolt
Rod Diameter Table

Rod Decimal
Diameter Equivalent
5/8" 6
3/4" 7
7/8" 8
1" 10
1-1/8" 11
1-1/4" 12
1-3/8" 13
E-30
Fasteners - Pins
A 2743 Clevis Pins
1/4" Hole
(Round flat head may be substituted
depending on availability)
B Dia
C Stock Weight
No. Dia. A B C 100 Pcs.
2743.62-1/4 5/8" 2-1/4" 1-1/16" 1/4" 19 lbs.
2743.64-1/2 5/8" 4-1/2" 1-1/16" 1/4" 46 lbs.
2743.65 5/8" 5" 1-1/16" 1/4" 48 lbs.
2743.72 3/4" 2" 1-1/16" 1/4" 36 lbs.
2743.72-1/4 3/4" 2-1/4" 1-1/16" 1/4" 37 lbs.
2743.72-1/2 3/4" 2-1/2" 1-1/16" 1/4" 38 lbs.
2743.72-3/4
2743.82-3/4
2743.83
3/4"
7/8"
7/8"
2-3/4"
2-3/4"
3"
1-1/16"
1-3/16"
1-3/16"
1/4"
3/8"
3/8"
39 lbs.
51 lbs.
55 lbs.
E
2743.84 7/8" 4" 1-3/16" 3/8" 73 lbs.
Drilled Bolts
To order any bolt drilled and with a AS2531.1D
cotter pin, add suffix "D" after the bolt length as
follows:
B83D-2
Stock
AS2531 Cotter Keys
No. Item Description
Hughes Brothers AS2531 Cotter Keys are
made of stainless steel.
AS2531.1A 3/16" x 1"
AS2531.1H 3/16" x 1-1/2"
AS2531.1E 1/8" x 1-1/2"
AS2531.1D 3/16" x 1-1/4" (humpback)
E-31
Fasteners - Nuts
C
Square Nuts
A Hughes Brothers Square nuts are compatible
with all ANSI C135.1 hardware. Nuts are tapped
oversize in accordance with ASTM A563 for
proper fit on galvanized bolts.
B
Stock Item Weight
No. Description A B C 100 Pcs.
N30 3/8" 21/64" 5/8" 7/8" 2.3 lbs.

N50 1/2" 7/16" 13/16" 1-1/8" 5 lbs.
N60 5/8" 35/64" 1" 1-3/8" 9 lbs.
N70
N80
3/4"
7/8"
21/32"
49/64"
1-1/8"
1-5/16"
1-1/2" 15 lbs.
1-3/4" 24 lbs.
E
N100 1" 7/8" 1-1/2" 2" 37 lbs.
B
Hex Nuts
Hughes Brothers Hex Nuts are compatible with all
ANSI C135.1 hardware. Hex nuts are tapped
oversize in accordance with ASTM A563.
A
C
Stock Item Weight
No. Description A B C 100 Pcs.
HN30 3/8" 21/64" 9/16" 5/8" 2 lbs.

HN50 1/2" 7/16" 3/4" 7/8" 4 lbs.
HN60 5/8" 35/64" 15/16" 1" 9 lbs.
HN70 3/4" 41/64" 1-1/8" 1-1/4" 10 lbs.
HN80 7/8" 3/4" 1-5/16" 1-1/2" 20 lbs.
HN100 1" 55/64" 1-1/2" 1-5/8" 27 lbs.
HN120 1-1/4" 1-1/16" 1-7/8" 2-1/8" 55 lbs.
E-32
Fasteners - Nuts
2745 Welded Washer Nut

Hughes Brothers 2745 Welded Washer Nut has a
3/16" x 3" round washer which is welded to a
standard square nut.
Stock Bolt Std. Weight

No. Dia. Pkg. 100 Pcs.
2745.5* 1/2" 100 26 lbs.

2745.6 5/8" 100 46 lbs.
2745.7 3/4" 100 49 lbs.
2745.8 7/8" 100 60 lbs.
*2" Washer E
2746 Cast Washer Nut

Hughes Brothers 2746 Cast Washer Nuts are cast
from ASTM A536, grade 65-45-12 ductile iron.
Stock Bolt Washer Std. Weight

No. Dia. Dia. Pkg. 100 Pcs.
2746.6 5/8" 2-1/2" 100 47 lbs.

2746.7 3/4" 3" 100 65 lbs.
2746.8 7/8" 3-3/4" 50 106 lbs.
2746.10 1" 3-3/4" 50 106 lbs.
E-33
Fasteners - Nuts
B E Oval Eye Nuts
Hughes Brothers Oval Eye Nuts have
strength and dimensions are per
ANSI C135.5.
C
D
F
EN50, EN60 & EN70 cast

A EN80 & EN100 forged
Ultimate
E
Part Tensile Std Pkg
Number Bolt Dia. A B C D E F Strength Wt / lbs Quantity
EN50 1/2 1-3/8 9/16 1-1/2 1-3/4 2-5/8 3 7,800 .5 100

EN60 5/8 1-3/8 9/16 1-1/2 1-3/4 2-5/8 3 13,550 .6 100
EN70 3/4 1-3/8 9/16 1-1/2 1-3/4 2-5/8 3 20,050 .6 100
EN80 7/8 1-7/8 3/4 2 2-5/8 3-1/2 4-5/16 25,400 1.5 25
EN100 1 1-7/8 3/4 2 2-5/8 3-1/2 4-5/16 33,500 1.5 25
E-34
Fasteners - Nuts
Locknuts
Stock Std. Weight
No. Description Pkg. 100 Pcs.
MF50 1/2" Square Locknut 1,000 2.3 lbs.

MF60 5/8" Square Locknut 1,000 3.9 lbs.
MF70 3/4" Square Locknut 700 5.4 lbs.
MF80 7/8" Square Locknut 500 7.2 lbs.
MF100 1" Square Locknut 400 11.7 lbs.
Hex Locknuts E
Stock Std. Weight
MFH50 1/2" Hex Locknut 1,000 2.1 lbs.

MFH60 5/8" Hex Locknut 1,000 2.6 lbs.
MFH70 3/4" Hex Locknut 500 4.6 lbs.
MFH120 1-1/4" Hex Locknut 300 11.7 lbs.
Split Lock Washers

No. Dia. Pkg. 100 Pcs.
SLW30 3/8" 1,000 .6 lbs.

SLW50 1/2" 1,000 2.0 lbs.
SLW60 5/8" 1,000 2.5 lbs.
SLW70 3/4" 1,000 4.2 lbs.
SLW80 7/8" 500 6.3 lbs.
SLW100 1" 500 8.9 lbs.
SLW120 1-1/4" 250 16.3 lbs.
E-35
Fasteners - Washers
No. Dia. Pkg. 100 Pcs. Double Coil Spring
SLW2-30 3/8" 1,000 2.6 lbs. Lock Washers
Standard
SLW2-50 1/2" 1,000 2.7 lbs.

SLW2-60 5/8" 500 4.5 lbs.
SLW2-70 3/4" 500 7.7 lbs.
SLW2-80 7/8" 500 10.5 lbs.
SLW2-100 1" 250 23.2 lbs.
SLW2-30H 3/8" NA 2.9 lbs.
SLW2-50H 1/2" 3.1 lbs.
Heavy
SLW2-60H 5/8" 4.9 lbs.

SLW2-70H 3/4" 8.2 lbs.
SLW2-60EM 5/8" 5.3 lbs.
Heavy
Extra
SLW2-70EM 3/4" 8.7 lbs.

SLW2-80EM 7/8" 12.5 lbs.
SLW2-100EM 1" 16.2 lbs.
E
2702 Spring Washer
Hughes Brothers 2702 Spring Washers are used in bolted
wood to steel connections to keep the connections tight and
static proof.
Stock Bolt Hole Std. Weight

No. Size X Y Size Pkg. 100 Pcs.
X Y 2702.5 1/2" 2-1/2" 5/8" 9/16" 100 23 lbs.

2702.6 5/8" 3-1/2" 1" 11/16" 50 92 lbs.
2702.7 3/4" 3-1/2" 1" 13/16" 50 88 lbs.
2702.8 7/8" 3-1/2" 1" 15/16" 50 87 lbs.
2702.10 1" 3-1/2" 1" 1-1/16" 50 85 lbs.
2702.12 1-1/4" 3-3/4" 1-1/16" 1-3/8" 50 91 lbs.
Stock Bolt Weight

No. Dia. 100 Pcs.
PAL Locknuts PL30

PL50
3/8"
1/2"
.1 lbs.
.7 lbs.
PL60 5/8" 1.0 lbs.
PL70 3/4" 1.6 lbs.
PL80 7/8" 2.3 lbs.
PL100 1" 2.6 lbs.
E-36
Fasteners - Washers
Square Washers
Hughes Brothers Square Washers are galvanized in
accordance with ASTM A153 standards.
Stock Bolt Hole W/ Std. Weight W

No. Size Size Thickness Pkg. 100 Pcs.
SW2-50 1/2" 9/16" 2" x 2" x 1/4" 200 25 lbs.

SW2-50-1/8 1/2" 9/16" 2" x 2" x 1/8" 200 12 lbs.
SW2-1/4-50 1/2" 9/16" 2-1/4" x 2-1/4" x 1/4" 200 34 lbs.
SW3-50 1/2" 9/16" 3" x 3" x 1/4" 100 62 lbs.
SW2-60 5/8" 11/16" 2" x 2" x 1/4" 200 25 lbs.
SW2-1/4-60 5/8" 11/16" 2-1/4" x 2-1/4" x 1/4" 200 34 lbs.
SW2-1/4-60-3/16 5/8" 11/16" 2-1/4" x 2-1/4" x 3/16" 200 26 lbs.
SW2-1/2-60 5/8" 11/16" 2-1/2" x 2-1/2" x 1/4" 200 42 lbs.
SW3-60
SW4-60
5/8"
5/8"
11/16"
11/16"
3" x 3" x 1/4"
4" x 4" x 1/4"
100
50
63 lbs.
113 lbs. E
SW2-70 3/4" 13/16" 2" x 2" x 1/4" 200 25 lbs.
SW2-70-1/8 3/4" 13/16" 2" x 2" x 1/8" 200 12 lbs.
SW2-1/4-70 3/4" 13/16" 2-1/4" x 2-1/4" x 1/4" 200 34 lbs.
SW2-1/4-70-3/16 3/4" 13/16" 2-1/4" x 2-1/4" x 3/16" 200 26 lbs.
SW3-70 3/4" 13/16" 3" x 3" x 1/4" 100 63 lbs.
SW3-70-3/8 3/4" 13/16" 3" x 3" x 3/8" 100 95 lbs.
SW4-70 3/4" 13/16" 4" x 4 "x 1/4" 50 113 lbs.
SW4-70-3/8 3/4" 13/16" 4" x 4" x 3/8" 50 170 lbs.
SW2-1/2-80 7/8" 15/16" 2-1/2" x 2-1/2" x 1/4" 200 63 lbs.
SW3-80 7/8" 15/16" 3" x 3" x 1/4" 100 63 lbs.
SW3-80-3/8 7/8" 15/16" 3" x 3" x 3/8" 100 95 lbs.
SW3-1/2-80-3/8 7/8" 15/16" 3-1/2" x 3-1/2" x 3/8" 100 130 lbs.
SW4-80 7/8" 15/16" 4" x 4" x 1/4" 50 113 lbs.
SW4-80-3/8 7/8" 15/16" 4" x 4" x 3/8" 50 170 lbs.
SW3-100 1" 1-1/16" 3" x 3" x 1/4" 100 63 lbs.
SW3-1/2-100 1" 1-1/16" 3-1/2" x 3-1/2" x 1/4" 100 87 lbs.
SW3-1/2-100-3/8 1" 1-1/16" 3-1/2" x 3-1/2" x 3/8" 100 130 lbs.
SW4-100 1" 1-1/16" 4" x 4" x 1/4" 50 113 lbs.
SW4-100-3/8 1" 1-1/16" 4" x 4" x 3/8" 50 170 lbs.
SW6-100-3/8 1" 1-1/16" 6" x 6" x 3/8" 25 334 lbs.
SW6-100-1/2 1" 1-1/16" 6" x 6" x 1/2" 25 445 lbs.
Ordering Example:
SW 6-100-3/8
Material thickness
Hole size
"W" Dimension
Designates Square Washer
E-37
Fasteners - Washers
Round Washers
Hughes Brothers Round Washers are
galvanized in accordance with ASTM A153
standards.
Stock Bolt Hole Std. Weight

No. Size Size Outside Dia. Thickness Pkg. 100 Pcs.
RW1-30 3/8" 7/16" 1" 14 ga. 1,000 2 lbs.

RW2-30 3/8" 7/16" 2" 11 ga. 200 21 lbs.
RW1-3/8-50
RW1-1/2-50
1/2"
1/2"
9/16"
9/16"
1-3/8"
1-1/2"
10 ga.
11 ga.
500
500
3 lbs.
10 lbs. E
RW2-50 1/2" 9/16" 2" 1/4" 200 21 lbs.
RW1-1/2-60 5/8" 11/16" 1-1/2" 11 ga. 500 10 lbs.
RW2-60 5/8" 11/16" 2" 1/4" 200 21 lbs.
RW3-60 5/8" 11/16" 3" 1/4" 100 50 lbs.
RW2-70 3/4" 13/16" 2" 1/4" 200 21 lbs.
RW3-70 3/4" 13/16" 3" 1/4" 100 50 lbs.
RW2-80 7/8" 15/16" 2" 1/4" 200 21 lbs.
RW3-80 7/8" 15/16" 3" 1/4" 100 45 lbs.
RW3-100 1" 1-1/16" 3" 1/4" 100 42 lbs.
Beveled Washers
Stock Bolt Weight
No. Dia. 100 Pcs.
BW-1/2 1/2" 9 lbs.

BW-5/8 5/8" 13 lbs.
BW-3/4 3/4" 15 lbs.
BW-7/8 7/8" 34 lbs.
E-38
Fasteners - Washers
Square Curved Washers

Hughes Brothers Square Curved Washers are curved edge-to-edge.
Square curved washers are galvanized in accordance with ASTM
A153.
Outside
Stock Bolt Hole Dimensions/ Std. Weight
SCW3-60 5/8" 11/16" 3" x 3" x 1/4" 100 63 lbs.
SCW3-70 3/4" 13/16" 3" x 3" x 1/4" 100 63 lbs.
SCW4-60 5/8" 11/16" 4" x 4" x 1/4" 50 113 lbs.

SCW4-70 3/4" 13/16" 4" x 4" x 1/4" 50 113 lbs.
SCW4-80 7/8" 15/16" 4" x 4" x 1/4" 50 113 lbs.
SCW4-100 1" 1-1/16" 4" x 4" x 1/4" 50 113 lbs.
E
Curved Washers
Hughes Brothers Curved Washers are curved corner-to-corner
to make a diamond shaped washer. Curved washers are
galvanized in accordance with ASTM A153.
Outside
Stock Bolt Hole Dimensions/ Std. Weight
CW60 5/8" 11/16" 4" x 4" x 1/4" 50 113 lbs.
CW70 3/4" 13/16" 4" x 4" x 1/4" 50 113 lbs.
CW80 7/8" 15/16" 4" x 4" x 1/4" 50 113 lbs.
CW100 1" 1-1/16" 4" x 4" x 1/4" 50 113 lbs.
CW80-3/8 7/8" 15/16" 4" x 4" x 3/8" 40 162 lbs.

CW100-3/8 1" 1-1/16" 4" x 4" x 3/8" 40 162 lbs.
CW80-1/2 7/8" 15/16" 4" x 4" x 1/2" 30 216 lbs.

CW100-1/2 1" 1-1/16" 4" x 4" x 1/2" 30 216 lbs.
E-39
Fasteners - Washers
Tapped Flange Washers
Hughes Brothers Tapped Flange Washers are used under
insulator pins where crossarm braces are attached or
wherever a static proof connection is required. The flange
provides a means for tightening the washer using a
crescent wrench.
Outside
Stock Bolt Dimensions/ Std. Weight
No. Size Thickness Pkg. 100 Pcs.
FW50T 1/2" 3" x 3" x 3/16" 100 66 lbs.

FW60T 5/8" 3" x 3" x 3/16" 100 66 lbs.
FW70T
FW80T
3/4"
7/8"
3" x 3" x 3/16"
3" x 3" x 3/16"
100
100
66 lbs.
66 lbs. E
Tapped Lip Washers

Hughes Brothers Tapped Lip Washers are used for crossarm
anti-split bolts and where crossarm braces attach to the
crossarm. The lip provides a means for tightening the washer
with a crescent wrench. The tapped through hole and nut
provide a secure double nut connection.
Outside
Stock Bolt Dimensions/ Std. Weight
No. Size Thickness Pkg. 100 Pcs.
LW50T 1/2" 2" x 2" x 3/16" 250 23 lbs.

LW60T 5/8" 2" x 2" x 3/16" 250 23 lbs.
LW70T 3/4" 2" x 2" x 3/16" 250 23 lbs.
E-40
Fasteners - Saddle Assemblies
A 2824 Eye Bolt & Saddle
Assemblies
Hughes Brothers 2824 Eye Bolt & Saddle Assemblies are used
for phase attachment of suspension insulators. The 3/16" x 4"
saddle washer features a tapped through hole. By tapping the
washer through hole, a double nut connection between the
washer and eye bolt is made, ensuring tight, radio frequency
B
static proof hardware.
Ordering Information:
Example for an Eye Bolt & Saddle Assembly:
E
2 8 2 4 .5 - "A"-"B"
Arm depth 4.5" to 9.5"
Arm width 3" to 6"
Rod size (.5) for 5/8" or (.6) for 3/4"
To Order just a Saddle Washer:

Stock Tapped Through
No. Hole Hole
2824.1B-* 1/2" -
2824.1C-* 5/8" -
2824.1D-* 3/4" -
2824.1E-* - 13/16"
2824.1F-* - 15/16"
2824.1G-* 7/8" -
* Specify width of crossarm.

Example: 2824.1C-3-3/4 = 3-3/4" crossarm
E-41
Fasteners - Screws
Gimlet Point Lag Screws

For maximum holding strength, Hughes Brothers Gimlet Point Lag
Screws should be installed with a wrench, rather than a hammer.
Stock Item Std. Weight

LS21-1/4 1/4" x 1-1/4" 1,000 2 lbs.
LS22-1/2 1/4" x 2-1/2" 1,000 4 lbs.
LS5/16-2 5/16" x 2" 1,000 4 lbs.
LS32-1/2
LS33
3/8" x 2-1/2"
3/8" x 3"
500
500
8 lbs.
8 lbs.
E
LS34 3/8" x 4" 500 10 lbs.
LS36 3/8" x 6" 250 15 lbs.
LS52 1/2" x 2" 500 11 lbs.

LS53 1/2" x 3" 250 15 lbs.
LS53-1/2 1/2" x 3-1/2" 250 20 lbs.
LS54 1/2" x 4" 250 20 lbs.
LS55 1/2" x 5" 250 25 lbs.
LS56 1/2" x 6" 200 29 lbs.
LS57 1/2" x 7" 150 40 lbs.
LS64 5/8" x 4" 150 32 lbs.

LS64-1/2 5/8" x 4-1/2" 150 35 lbs.
LS65 5/8" x 5" 150 40 lbs.
E-42
Fasteners - Shackles
C
F
2865 Shackles G
Hughes Brothers 2865 Shackles are forged from A

ASTM A36 steel. D
B
E
Stock Ultimate Std. Weight

No. A B C D E F G Strength Pkg. 100 Pcs.
2865.1 1/2" 2-5/16" 1-1/2" 13/16" 1-1/4" 5/8" 3/4" 18,000 lbs 50 72 lbs.
2865.2 5/8" 2-1/2" 1-3/4" 1-1/16" 1-5/8" 3/4" 7/8" 25,000 lbs 40 143 lbs.
2865.3 3/4" 3" 2" 1-1/4" 1-7/8" 7/8" 1" 35,000 lbs 20 215 lbs.
2865-B1*
2865-B2*
1/2"
5/8"
2-5/16"
2-1/2"
1-1/2" 13/16"
1-3/4" 1-1/16"
1-1/4"
1-5/8"
5/8"
3/4"
3/4"
7/8"
18,000 lbs
25,000 lbs
50
40
72 lbs.
143 lbs.
E
2865-B3* 3/4" 3" 2" 1-1/4" 1-7/8" 7/8" 1" 35,000 lbs 20 215 lbs.
*Includes bolt, nut and cotter instead of pin and cotter.
B
1-7/8"
A
2866 Twisted Shackles
Hughes Brothers 2866 Twisted Shackles are forged from
ASTM A36 steel. The shackle comes complete with a 3/4"
bolt, nut and cotter.
Stock Ultimate Std. Weight

3-1/2"
1" No. A B Strength Pkg. 100 Pcs.
2866 1/2" 3-1/2" 25,000 lbs. 25 220 lbs.

2866-A 1-1/8" 4" 25,000 lbs. 25 241 lbs.
3/4" 2866-B 5/8" 3-1/2" 25,000 lbs. 25 220 lbs.
E-43
Fasteners-Clevis/Turnbuckles
AS2545 Turnbuckles
Hughes Brothers Turnbuckles are forged from carbon steel. They are
normally furnished with a bolt, nut and cotter in the jaw of the turn-
buckle. Rod end eyes have a hole size 1/16" larger than the rod size.
Jaw & Jaw

E
Jaw & Rod
End Eye
Rod End Eye

& Rod End Eye
E-44
E B
Jaw Dimensions
A
A B C D E
C
D 3/4" 1-27/32" 15/16" 5/8" 13/16"

7/8" 1-31/32" 1-5/32" 3/4" 29/32"
1" 2-13/32" 1-3/16" 7/8" 1-1/16"
D B Eye Dimensions
A
A B C D
3/4"
7/8"
13/16"
15/16"
27/32"
15/16"
3/4"
7/8"
E
1" 1-1/16" 1-1/16" 1"
C
CC Length @ Ultimate Weight Min Max

Stock No. size Description Midposition Strength 100 Pcs. Length Length
AS2545-Z 3/4" x 6" Jaw & Jaw 18-1/2" 28,000 450 lbs. 15-1/2" 21-1/2"
AS2545-BB Jaw & Rod End 18" 28,000 450 lbs. 15" 21"
AS2545-A 3/4" x 9" Jaw & Jaw 22" 28,000 525 lbs. 17-1/2" 26-1/2"
AS2545-B Jaw & Rod End 22" 28,000 525 lbs. 17-1/2" 26-1/2"
AS2545-X Rod End & Rod End 17-1/2" 28,000 525 lbs. 13" 22"
AS2545-FF 3/4" x 12" Jaw & Jaw 27" 28,000 600 lbs. 21" 33"
AS2545-BBB Jaw & Rod End 25" 28,000 600 lbs. 19" 31"
AS2545-T 7/8" x 6" Jaw & Jaw 20-1/2" 35,000 600 lbs. 17-1/2" 23-1/2"
AS2545-TT Jaw & Rod End 20-1/2" 35,000 600 lbs. 17-1/2" 23-1/2"
AS2545-C 7/8" x 12" Jaw & Jaw 29" 35,000 850 lbs. 23" 35"
AS2545-D Jaw & Rod End 27" 35,000 850 lbs. 21" 33"
AS2545-Y Rod End & Rod End 27" 35,000 850 lbs. 21" 33"
AS2545-E 1" x 12" Jaw & Jaw 30" 45,000 1200 lbs. 24" 36"
AS2545-F Jaw & Rod End 30" 45,000 1200 lbs. 24" 36"
E-45
Mounting Hole
B
2"
Clevis Hole
AS2277 Clevis
The Hughes Brothers AS2277 Clevis allows for a simple
method for making a jaw or clevis connection at the pole. The
clevis is used with standard machine bolts, sold separately.
C
Ultimate
Stock Clevis Mtg. Tensile* Std. Weight
No. A B C Hole Hole Strength Pkg. 100 Pcs.
AS2277
AS2277-A
4"
4"
2-1/4" 3/8" 15/16" 15/16"
2-1/4" 3/8" 13/16" 13/16"
25,000 lbs.
18,350 lbs.
30
30
172 lbs.
177 lbs.
E
AS2277-B 4" 2-1/4" 3/8" 1-1/16" 13/16" 18,350 lbs. 30 170 lbs.
AS2277-F 4-3/4" 1-13/16" 1/4" 13/16" 11/16" 12,400 lbs. 30 140 lbs.
AS2277-G 4-3/4" 2" 1/4" 13/16" 13/16" 18,350 lbs. 30 144 lbs.
AS2277-H 6-3/4" 2" 1/4" 13/16" 13/16" 18,350 lbs. 30 196 lbs.
AS2277-J 4-1/2" 2-1/4" 3/8" 1" 15/16" 25,400 lbs. 30 198 lbs.
* Controlled by bolt strength.
E-46

Fastener

Uploaded by

Copyright:

Available Formats

Fastener

Uploaded by

Copyright:

Available Formats

Fastener Specifications

Standard Specifications for Fasteners

ASTM A563 Standard Specification for Carbon and

Shear Strengths Tensile Strengths Decimal

Stock Item Std. Weight Stock Item Std. Weight

1/2" Square Head Bolts 3/4" Square Head Bolts

Stock Item Std. Weight Stock Item Std. Weight

7/8" Square Head Bolts 1" Square Head (con't.)

Hex Head Bolts

Each bolt is shipped with an assembled nut. All

7/8" 1-5/16" 37/64"

3/8" - - 3/8" 4,250 lbs.

Stock Item Std. Weight Stock Item Std. Weight

Stock Item Std. Weight Stock Item Std. Weight

Note: Cold weather bolts are available under ASTM

Tensile Strengths Shear Strengths Threads

1/2" 10,500 lbs. 1/2" 6,950 lbs. 9,000 lbs. 1/2" 13

Bolt Stock Numbers for Bolt Diameters

Length of full body

are hot dip galvanized in accordance with ASTM A153.

Each bolt is shipped with an assembled nut. All high

Stock Item Std. Weight Stock Item Std. Weight

1/2" High Strength Bolts 3/4" High Strength Bolts

Stock Item Std. Weight Stock Item Std. Weight

7/8" High Strength Bolts 1" High Strength Bolts (con't.)

Note: Other lengths and specified thread lengths

Washer Head Bolts

Hughes Brothers Washer Head Bolts are manufactured

Stock Item Std. Weight Stock Item Std. Weight

1/2" Washer Head Bolts 3/4" Washer Head Bolts

Stock Item Std. Weight Stock Item Std. Weight

7/8" Washer Head Bolts 7/8" Washer Head Bolts

Note: Other lengths available.

Bolt Thread Unit Bolt Thread Unit Bolt Thread Unit

2719 Oval Eyebolt

Minimum Tensile Strength 13,550 lbs.

Following ANSI C135.4 specifications, the unthreaded

Stock Bolt Length Thread Weight

3/4" Shoulder Eyebolts

Hughes Brothers 2721 Welded Shoulder Eyebolt has

L Hughes Brothers 2724 Forged Eyebolts are

Weight Stock Bolt Weight

Hughes Brothers Threaded Rods are manufactured in

Tensile Strengths for ANSI C135.1 Decimal

1/2" 7,800 lbs. 1/4" .2 2

Stock Item Std. Weight Stock Item Std. Weight

Stock Item Std. Weight Stock Item Std. Weight

1" Full Threaded Rods 1-1/4" Full Threaded Rods

Stock Item Std. Weight Stock Item Std. Weight

3/4" Threaded Double End Rods

Stock Item Std. Weight Stock Item Std. Weight

R U-Bolt, with 4 nuts and 2 locknuts

Stock No. Dia. "A" "B" "C" Pipe / Conduit Size

B1964.1A 1/2" 3-1/4" 4" 2-5/8" 2"

1329 U-Bolt &

Stock Item Weight

2718.33* 3/8"x1-1/2" 7/16" 250 19 lbs.

*Includes bonding clip, carriage bolt, nut, and locknut.

Max. 2727 Bonding Clip E

GWB 51-1/2 Bonding Bolt

GWB51-1/2 1/2" 1-1/2" 7/16" 200 32 lbs.

2722 Bent Bolt & Stud

Each bent bolt is furnished with a nut and locknut.

2722 Bent Bolt

2722 Bent Stud

Stock Item Length Bend Full Body Weight

Insulator Mounting Studs

Insulator mounting studs are furnished assembled with hardware as

2750.1A 2-7/8" 1-3/4" 3/4" 5/8" 43 lbs.

2751.1A 3" 1-7/8" 3/4" 3/4" 63 lbs.

2755.1A 3-3/16" 2" 7/8" 7/8" 63 lbs.

2753 Mounting Studs