VCDS Coding List

Sunroof (SAD) - Enable Panoramic roof convenience opening
In the onboard supply control unit gives you the option of the VW Golf 7 the possibility the built-glass panoramic
roof (sunroof - SAD) to have press and hold automatically when the remote control on the release button
mitffnen addition to opening windows as well. Ex-factory, the only Panoramadauch issues and does not open
completely.
The following code is used:
1. Select STG 09 (vehicle power)

2. STG access permissions -> Function 16
3. Enter access code 31347
4. STG adjustment -> Function 10
5. Select Comfort opening direction SAD - channel (10) - Access Control 2
6. Emphasis on open set default: tilting
Adaptation of the background of the MFA on carbon look
In dash panel insert (KI) you can adjust the VW Golf 7 the background on carbon look. The MFA (Multi Function
Display) is thus converted to the new look.
1. Select STG 17 (dash panel insert)

3. Select a channel display representation
4. Change "Option 2" (default value: Version 1)
Live with VCDS coding instructions:

Adaptation of the animated boot logos in Discover Pro
In the VW Golf 7 and verbautem Navigation System Discover Pro gives you the ability to customize the boot
logo. The boot logo is thus represented model according to the setting with GTD, GTI or R.
1. Select STG 5F (infotainment)

2. STG Long Coding -> Function 07
3. Byte 18
4. Adjust value corresponding
02 = GTD (only 1 bit activate)

03 = GTI (bits 0 and 1 activate)
06 = R Line (bits 1 and 2 enable)

Adaptation of dynamic start-off
In the control unit of the electronic brake system gives you the option of the VW Golf 7 and verbautem automatic
transmission (S-Tronic) adapt the dynamic start-off. The approach can thus be changed accordingly. Since when
shipped to the dynamic start assist with the setting normally relatively late releases the brake is always a strong
jerk felt, which causes an overall poor starting performance of the vehicle. If you change the setting to keep the
early (and hence the brake intervention) of the Start-minimized and thus you feel no annoying and can hold more
- as it should - start smoothly.
1. Select STG 03 (electronic brake system)

3. Select Dynamic pull
4. worth adjust accordingly (default: normal) Breakfast - brake is released quickly and requires very little
gas (Anfahrrucken is no longer noticeable) Normal - Factory default (noticeable jerk when starting) Late
- brake can be late going and only with relatively much gas (strong jerk when Start)

Activation of the trailer hitch
In the VW Golf 7 you can a retrofitted towbar (AHK) unlock as the company Westfalia subsequently with hunter
E-set / adjust so that it is on the vehicle and stored correctly and the parking aid, the engine and the CAN
Gateway supports the functions correctly and this still gets no error messages in the MFA. If you have just
upgraded the large double fan, an adaptation of the engine electronics is already mandatory.
Coding instructions currently being updated, please contact us if you want to activate the function in your vehicle
me.
Detailed images after adjustment:

in progress :)
Adaptation of the Hill Start Assistant
In the control unit of the electronic brake system gives you the option of the VW Golf 7 adapt the hill start
assistant. This allows you to customize the start-up behavior accordingly.

3. Select Berganfahrassistent
4. worth adjust accordingly (default: normal)

in progress :)
US activate the parking light flasher
In the central electrics you can with the VW Golf 7 to let mitleuchten dimmed indicator (known. US light
function). Depending on the degree of dimming is set, the indicators are thus also activated the stand and low
beam. Also possible with active daytime running lights and combination of the two functions.

5. Channel (9) 0 BLK light fitting VL B36-light function D 0 (front left turn signal)
6. Generally adjust value to parking light
7. Channel (10) 0 BLK light fitting VL B36-dimming select CD 0

8. Adjust value accordingly (dimming level in percent; Recommendation value: 30 (30%))
9. Channel (9) -Leuchte1BLK VRB20 light function D 1 Select (indicator Front Right)
10. Generally adjust value to parking light
11. Select a channel (10) -Leuchte1BLK VRB20-dimming CD 1

12. Adjust value accordingly (dimming level in percent)
Thus, the turn signals cancel on the respective page is also available in the flashing process
according to the dimming is also necessary following
1. Channel (12) -Leuchte0BLK VL-B36 Lichfunktion E Select 0

2. Adjust Value Blink left dark phase
3. 0 Select a channel (15) -Leuchte0BLK VL B36-dimming Direction EF
4. Adjust value to minimize
5. Channel (12) -Leuchte1BLK VRB20 light function E 1 Select

6. Adjust value to flash right dark phase
7. 1 Select the channel (15) -Leuchte1BLK VRB20 dimming Direction EF

8. Adjust value to minimize

see above :)
Adjustment of the intensity of the brake discs drying
In braking or ABS control unit gives you the option of the VW Golf 7 to adjust the intensity of the brake discs
drying. If your car tend to squeak if you had turned this for example in rainy weather, can the annoying dry disc
brakes are reduced or even completely disabled scrape or squeak no longer have.

3. Select a channel discs drying
4. Value adjust accordingly choices: not activated, weak, medium, strong Skoda Octavia III 5E and 5F Seat
Leon factory setting status: weak <- Recommendation

in progress :)

in progress :)
Automatic activation of the CH / LH function
In the onboard supply control unit gives you the option of the VW Golf 7 Coming Home (CH) and Leaving Home
(LH) switch function, so that is activated automatically, without having to turn off the light switch.

3. Enter the unlock code 31347
5. (1) Comfort Lighting Coming Home Choose a Verbaustatus

6. Value to automatically adjust default: manual

see above :)
Activate CH / LH fog lights
In the onboard supply control unit gives you the option of the VW Golf 7 to set the Coming Home (CH) and
Leaving Home (LH) function on the fog lights. Thus, the xenon light is preserved and only the daytime running
lights and fog lights (NSW) enabled.

5. (4) Comfort Lighting Lights Coming Home Select

6. Emphasis on light mist customize default value: low beam

see above :)

Activation of the horn acknowledgment at DWA + when locking
and unlocking the vehicle
In the onboard supply control unit gives you the option of the VW Golf 7 the function of the DWA + acknowledge
to the (so-called. US setting) of the lock and unlock greatly expand. When you lock and unlock when the vehicle
is thus output from the DWA + a confirmation tone.

5. Select Unlock (1) feedback signals-Acoustic feedback

6. Adjust value to yes
7. (2) Select lock feedback signals-Acoustic feedback

8. Adjust value to yes
9. (8) -Rckmeldungssignale-Acoustic feedback globally

10. Value to actively adapt If desired, the DWA can be acknowledged in the menu control independently
activated and deactivated via the corresponding menu entry:
11. (7) -Rckmeldungssignale-menu control acoustic feedback
12. Value to actively adapt If desired, the duration of the acoustic feedback can be shortened:
13. (3) -Rckmeldungssignale duration of the acoustic feedback from the single horn
14. Adjust Value on short

see above :)
Adaptation of the shutdown
In the control unit of the parking aid you can adjust the VW Golf 7 creep speed. Depending on the set amount
deactivation can thus be delayed or even accelerated.
1. Select STG 10 (parking aid)

3. Select a channel shutdown for parking aid
4. Adjust value corresponding to (default: 10 km / h)

in progress :)
Adjustment of the request for the audio lowering
In the control unit of the parking aid you have the option of the VW Golf 7 to disable the requirement for Audio
reduction. Thus, in inserting the reverse gear, the volume is not reduced in the radio or navigation system.
1. Select STG 10 (parking aid)

3. Select Audio reduction requirement
4. worth adjust to off (default: on)

in progress :)
Activation of the driving school mode in the CAR menu
In the infotainment controller gives you the option to activate the driving school mode with the new VW Golf
7. Thus, the display shows the speedometer is digital, and represented the turning light control. Representation
possible on Composition Colour / Touch / Media.
1. Select STG 5F (infotainment)

3. Select a vehicle function list CAN driving school - channel (11)
4. Adjust Value on available
5. Channel (171) - Vehicle Operation Menu - Select menu_display_driving_school

6. Set value to Enabled
7. Channel (171) - Vehicle Operation Menu - Select menu_display_driving_school_over_threshold_high

8. Set value to Enabled

see above :)
Turn on sharing the wake of the windows when opening the door
In the onboard supply control unit gives you the option of the new VW Golf 7 to activate the release of the follow-
up windows when opening the doors. If you leave the vehicle and activate the automatic operation of the
windows, this is not interrupted when opening the doors and the windows closed or opened accordingly.

5. Select (13) -Zugangskontrolle 2 released FH trailing stop at Tueroeffnen
6. Value set to inactive default: active

in progress :)
In the VW Golf 7 and verbautem front camera system for the high-beam assistant you can adjust it accordingly in
the on and off times.
1. STG A5 (front / front view camera)

3. Select channel activation speed for high-beam assistant
4. Value corresponding to customize default value: 57 km / h
5. Channel speed threshold for high beam recommendation Select

(speed at the dimmed the high beam and high-beam assistant is disabled)
6. Value corresponding to customize default value: 27 km / h

in progress :)
Prevent reset / reset the high-beam assistant
In the VW Golf 7 and verbautem Beam Assistant (DLA - Dynamic Light Assist) to disable the automatic reset or
the reset of the wizard. Thus, it is not disabled after parking the vehicle and re-starting the engine, the assistant
beam assistant activated but this is immediately activated and you need not press the high beam lever.
1. STG 09 (vehicle power)

5. Channel (4) Select -Assistenzlichtfunktionen-beam assistant Reset
6. Value not actively adjust default: active

in progress :)
Disable seat belt reminders
In dash panel insert (KI) you have the option of the VW Golf 7 to disable the seat belt reminders. Optical and
acoustic display in the instrument cluster is shut down with it.

3. Select Disable seat belt reminders
4. Change to "yes" (default: none)

in progress :)
Deactivation of tears wiping function of the rear wiper
In the onboard supply control unit gives you the option to disable the VW tears wiping function of the rear
wiper. With an active front wiper is thus no longer automatically wiped when inserting the reverse gear.

5. (4) Select -Heckscheibenwischer-Traenenwischen rear
6. Adjust Value to inactive Default value: active

see above :)
Adaptation of the turn signal cycle
In the central electrics you can adapt to the VW Golf 7 Zylkus of comfort blinker. Range 1-5 possible (ie between
1x and 5x flashes per tap)

5. Channel (2) Select a flashing turn signal flasher control comfort cycles
6. Adjust value corresponding to - possible values: 1-5 Default: 3 (3x flash)

Subsequent to unlock the Lane Assist - Lane Departure
In the VW Golf 7 you unlock the ability afterwards the Lane Assist and Lane Departure Warning. The STG A5 of
the front or front view camera must be installed to.
The optional lane departure "Lane Assist" can help to prevent unintended lane departure by a corrective steering
intervention. For this purpose scans the front front view camera (STG A5) on the interior mirror the markings on
the road at a speed of 65 km / h. For proper operation of the system is merely a road marking, whether outside or
to the street mid required. If the lane bounded on both sides by markings, the wizard can adjust to request
addition to the preferred trajectory within the track. The steering intervention of the "Lane Assist" takes place here
always continuous and smooth, to avoid being perceived as unpleasant or disturbing. If the indicator is set or an
active steering motion is detected, the system also remains passive and thus avoids an obstacle to the
driver.This always remains full Lord of the steering wheel.
1. Select STG 17 (panel)

3. Bye 4
4. Enable Bit 6 lane departure / Lane Assist
5. Bye 11
6. Bit 1 lane departure / Lane Assist Information BAP fitted activate
7. Select STG A5 (front / front view camera)

9. Bye 0
10. Activate installed Bit 0 Lane Departure HCA
11. Select STG A5 (front / front view camera)

15. Channel - Select HCA_On_State
16. Set value to Menu
17. Channel - Select HCA_Warning_intensity

18. Set value to Menu
19. Channel - Select BAP_Personalisierung

20. Put emphasis on not activated
21. Channel - Select the time of engagement

22. Place setting in Menu - emphasis on late
23. Select Personalization spurt holding an assistant to a terminal 15 - channel

24. Put value on last setting
25. STG 44 (power steering)

29. Bye 0
30. Activate installed Bit 4 lane departure HCA
31. Select STG 5F (Information Electronics)

33. Channel - (49) Select -Vehicle function list BAP LDW_HCA_0x19
34. Set to Enabled
35. Channel - Select (21) vehicle menu operation menu_display_Lane_Departure_Warning

36. Set to Enabled
37. Select (23) vehicle menu Bedienung_menu_display_Lane_Departure_Warning_over_threshold_high -

channel
38. Set to Enabled

in progress :)
Activation of the LED indicator lights
In the onboard supply control unit you can unlock the VW Golf 7 retrofit LED license plate lights. Thus, no error
message appears more on the instrument panel (dash panel insert).

5. (1) -Leuchte25KZL HA59-load type 25 Select
6. Customize general LED - value at 43
7. (6) -Leuchte25KZL HA59-dimming AB 25 Select

8. Adjust the value to 127
Note: unlock the VW dealer by task code 381AA also

see above :)
Adjustment of the light sensor sensitivity
In the onboard supply control unit gives you the option of the new VW Golf 7 to adjust the sensitivity of the light
sensor.

5. (8) -Assistenzlichtfunktion - Select a light sensor sensitivity
6. Set value to sensitive Default: normal

in progress :)
Adaptation of the background of the MFA on carbon look
In dash panel insert (KI) you can adjust the VW Golf 7 the background on carbon look. The MFA (Multi Function
Display) is thus converted to the new look.

3. Select a channel display representation
4. Change "Option 2" (default value: Version 1)

Display the oil temperature gauge in MFA
In dash panel insert you the option of the VW Golf 7 to activate the oil temperature gauge in the MFA (Multi
Function Display) if it is not available.

3. Byte 10
4. Enable bit 1

in progress :)
Enable operation of the rain closing
In the onboard supply control unit gives you the option of the VW Golf 7 to activate the function of the rain
closure. The windows and the panoramic roof are at verbautem rain sensor thus in a sealed vehicle and activated
rain sensor automatically closed. The operation mode can be enabled or disabled as well in the CAR menu when
the corresp. Entry is activated.

5. (14) Select Access Control 2-Regenschlieen_art
6. Adjust Value on permanently
7. (15) Select Access Control 2-Regenschlieen_art

8. Adjust value to active
9. (26) Access Control 2 Control the menu to select Rain Close


12. Select RLS (rain and light sensor) - STG
13. Byte 0
14. Enable Bit 2
see above :)
Adaptation luminance of the reversing lights
In the onboard supply control unit, you have 7 the ability to customize the new VW Golf, the brightness of the
reversing lights. As desired, the luminosity can be increased or reduced.

5. (6) -Leuchte28RFL LC11-dimming AB 28 Select
7. (6) -Leuchte29RFL RA64-dimming AB 29 Select

8. Value customize entsprchend Default: 86

in progress :)
Activation of the tail light brake light
In the onboard supply control unit gives you the option of the new VW Golf 7 to activate the rear in addition to the
brake light. The inner taillights are thus also activated during braking.

4. STG adjustment -> function 10 Adjustment for LED taillights
5. (8) -Leuchte27NSL RC6-light function C 27

6. Put emphasis on brake light
7. Select (10) -Leuchte27NSL RC6-dimming CD 27

8. Value to 100 set adaptation of halogen taillights
9. Select (8) -Leuchte23SL HRA65 light function C23

11. Select (8) -Leuchte24SL HRA65 light function C24


in progress :)

Storage of the last set stage seat heating
In the climate control unit gives you the option of the VW Golf 7 to enable the storage of the last set seat heating
stage. Thus, after restart the vehicle, the predetermined level is automatically reset.
1. STG 08 (Air)
3. Select a channel storage seat heating stage driver
4. Adjust Value to active (default value: not activated)
5. Select a channel storing the front passenger seat heating stage

6. Adjust Value to active (default value: not activated)

in progress :)
Adaptation of the Lane Departure intensity of steering assist,
steering wheel vibration intensity, deactivation threshold
driver activity
In the VW Golf 7 you can adjust the lane departure warning. If you, for example, the Active Lane Assistant off too
soon, you can change with the adjustment of deactivation threshold driver activity behavior and extend acc. Or
shorter.
Adjust intensity of steering wheel vibration
1. Select STG A5 (Camera)

5. Select a channel intensity steering wheel vibration
6. Value corresponding to customize default value: medium options: early, middle, late
deactivation threshold of driver activity

5. Select a channel deactivation threshold driver activity
Adjust intensity steering wheel support

5. Select a channel intensity steering wheel support

in progress :)
Adjustment of the interval of the headlight washers (SWRA)
In the onboard supply control unit gives you the option of the new VW Golf 7 adapt the control of the headlight
washer system.Depending on the desired value, future less often triggered this (thus saving the consumption of
the fountain solution) or even more often if the headlights are often too dirty (and thus more consumption during
the wiping water). Likewise, the washing time can be adjusted accordingly. Here, too, thus the amount of the
fountain solution consumed can be reduced or increased.

5. Channel (1) - Select windshield wipers Front Number of operations per wash SRA activation
7. Channel (3) - select windshield wipers SRA washing time


in progress :)
Delayed activation of the headlight cleaning system for the front
washer
In the onboard supply control unit gives you the option of the VW Golf 7 to extend the delay time for Anpsrechen
the headlight washer system. Thus, the front headlamp washing is later activated, thereby shortening the
cleaning water.

5. (2) Select a windshield wiper-SRA delay time
6. Adjust as desired value corresponding default value: 0 ms Example value: 1500 ms

in progress :)
Activation of the parking light of the rear lights to LED Daytime
Running Lights
In the onboard supply control unit gives you the option of the new VW Golf 7 mitzuschalten the tail lights as a
stand light with active LED daytime running lights. If in the daytime running lights brightness of the headlights
active, in addition, the tail lights are turned on.

5. Channel (6) - Daytime Running Lights - daytime running lights additionally activated select still light
6. Put emphasis on active

in progress :)
Activation of the fog lights (NSW) for LED Daytime Running
Lights
In the onboard supply control unit gives you the option of the new VW Golf 7 the fog lights (NSW) for LED
daytime running lights to activate. Thus, the fog lights are switched on in active status light (just for halogen
headlights and daytime running lights halogen).

5. Channel (5) -Leuchte12NL LB45-light function B 12 Select
(lights Index: Left fog light headlight)
6. Adjust value as daytime running lights
7. Channel (4) -Leuchte13NL RB5 light function B 13 Select

(lights Index: Right fog light headlight)
8. Adjust value as daytime running lights

in progress :)
Disable the daytime running lights with the handbrake applied
In the onboard supply control unit gives you the option of the new VW Golf 7 to disable the daytime running lights
with activated handbrake.

5. Select unwind with handbrake daytime running lights - channel (5) - Daytime Running Lights

in progress :)
Activating the function daylight only in switch position of car
In the onboard supply control unit gives you the option of the new VW Golf 7 daytime running lights (DRL) be
adjusted so that it is activated only in switch position car. In position '0' (light off) so the daytime running lights of
the headlights (LED or halogen) is disabled.

5. Channel (9) - Select daytime running lights only in switch position auto

in progress :)
Ability to disable the daytime running light in the CAR Menu
In the onboard supply control unit gives you the option of the VW Golf 7 (/ Halogen LED daytime running lights in
the headlights) to activate the eligibility of daytime running light in Car Menu (Setup). You are able to activate the
daytime running independently or to disable.

5. Select Daytime running lights daytime running lights activation by BAD or Operating sequence possible

Activation of the environment lighting even in the folded wing
mirrors
In the door control units you have the option of the VW Golf 7 to activate the lighting environment even with the
folded side mirrors.From the factory, the lighting is disabled if the mirrors are folded.
1. Select STG 52 (Trelektr. Beifahr.)

3. Byte 01
4. Disable Bit 5
5. Select STG 42 (Trelektr. Driver)

7. Byte 01
8. Disable Bit 5

in progress :)

in progress :)
Customize consumption display (FIS)
In the instrument cluster controller gives you the option of the VW Golf 7 adjust the fuel gauge. If you deviate in
the consumption shown in the FIS (versus fuel receipt) you can perform an adjustment in percentages
1. Select STG 17 (instrument cluster)

3. Select Adjust Display correction consumption and range
4. The base value is 100
now you can all in 1% steps adjust, the respective maximum values are 85 (%) and 115 (%).

in progress :)
Enable Pointer Test / pointer deflection / Staging
In dash panel insert you the option of the VW Golf 7 to activate a link test / Hand Wipe / staging. With the ignition
on so all hands go back in AI briefly stop and return to the starting position.

2. STG coding -> function 07
3. Byte 1
4. Enable bit 0

in progress :)
Deactivation of the message / tone with ignition on
In dash panel insert (KI) you have the option of the VW Golf 7 to disable the message with ignition on. Thus, we
turned off the annoying tone when the ignition and open the driver's door.

3. Ignition active message; Release
4. Change to "No Display" (default value: driver's door)

in progress :)
Enable display of cylinder deactivation
In dash panel insert (instrument cluster) you have the option of the VW Golf 7 (including at the BlueMotion
models.) The text of the cylinder deactivation - to activate (COD Cylinder on Demand). After activation, a warning
message is displayed in the MFA (Multi Function Display) when the cylinders are turned off.

3. Select a channel cylinder deactivation
4. Change activated (default value: No display)

in progress :)

VCDS Coding List

Uploaded by

VCDS Coding List

Uploaded by

Sunroof (SAD) - Enable Panoramic roof convenience opening

The following code is used:

1. Select STG 09 (vehicle power)

The following code is used:

1. Select STG 17 (dash panel insert)

Live with VCDS coding instructions:

The following code is used:

1. Select STG 5F (infotainment)

02 = GTD (only 1 bit activate)

Live with VCDS coding instructions:

The following code is used:

1. Select STG 03 (electronic brake system)

Live with VCDS coding instructions:

The following code is used:

Live with VCDS coding instructions:

Detailed images after adjustment:

The following code is used:

1. Select STG 03 (electronic brake system)

Live with VCDS coding instructions:

Detailed images after adjustment:

The following code is used:

1. Select STG 09 (vehicle power)

7. Channel (10) 0 BLK light fitting VL B36-dimming select CD 0

11. Select a channel (10) -Leuchte1BLK VRB20-dimming CD 1

1. Channel (12) -Leuchte0BLK VL-B36 Lichfunktion E Select 0

5. Channel (12) -Leuchte1BLK VRB20 light function E 1 Select

7. 1 Select the channel (15) -Leuchte1BLK VRB20 dimming Direction EF

Live with VCDS coding instructions:

The following code is used:

1. Select STG 03 (electronic brake system)

Live with VCDS coding instructions:

Detailed images after adjustment:

The following code is used:

1. Select STG 09 (vehicle power)

5. (1) Comfort Lighting Coming Home Choose a Verbaustatus

Live with VCDS coding instructions:

The following code is used:

1. Select STG 09 (vehicle power)

5. (4) Comfort Lighting Lights Coming Home Select

Live with VCDS coding instructions:

Detailed images after adjustment:

The following code is used:

1. Select STG 09 (vehicle power)

5. Select Unlock (1) feedback signals-Acoustic feedback

7. (2) Select lock feedback signals-Acoustic feedback

9. (8) -Rckmeldungssignale-Acoustic feedback globally

Live with VCDS coding instructions:

The following code is used:

1. Select STG 10 (parking aid)

Live with VCDS coding instructions:

Detailed images after adjustment:

The following code is used:

1. Select STG 10 (parking aid)

Live with VCDS coding instructions:

Detailed images after adjustment:

The following code is used:

1. Select STG 5F (infotainment)

5. Channel (171) - Vehicle Operation Menu - Select menu_display_driving_school

7. Channel (171) - Vehicle Operation Menu - Select menu_display_driving_school_over_threshold_high

Live with VCDS coding instructions:

The following code is used:

1. Select STG 09 (vehicle power)

Live with VCDS coding instructions:

The following code is used:

1. STG A5 (front / front view camera)

5. Channel speed threshold for high beam recommendation Select

Live with VCDS coding instructions:

The following code is used:

1. STG 09 (vehicle power)

Live with VCDS coding instructions:

The following code is used:

1. Select STG 17 (dash panel insert)

Live with VCDS coding instructions:

Detailed images after adjustment:

The following code is used:

1. Select STG 09 (vehicle power)