Compack Controller

Monitoring and Control Unit

SMALL WITH ALL

All-in-one plug-in controller. Comprehensive

functionality in a small box designed for small
range power systems.

COMPACK CONTROLLER
Doc 242100.400.DS3 v7

APPLICABLE SYSTEMS KEY FEATURES

TELECOM REMOTE MONITORING VIA ETHERNET
CHAMELEON SNMP (v3,v2c,v1)
MICROPACK 48V WEB PAGES
MINIPACK 1U
PLATPACK2 DC/DC IN INTERFACE EMAIL OF LOGS AND ALARMS
KIT 3 CONFIGURABLE RELAYS
3 MULTIPURPOSE INPUTS
INDUSTRIAL TEMPERATURE
MICROPACK 12V & 24V
COMPACK IN INTERFACE KIT (PN 242100.900)
SYMMETRY
COMPACK INTERFACE KIT
DIGITAL INPUT
2 LVD CONTROLLS (LVBD+LVLD)
12V,24V,30V,48V & 60V SUPPORTED
BATTERY MONITORING
MINIPACK 1U 1600W SYSTEM AUTO/PERIODIC TEST
CAPACITY/QUALITY ESTIMATION
ELTEK SOFTWARE SUPPORTED
ELTEK NETWORK UTILITY
MULTISITE MONITOR
POWER SUITE
MICROPACK 1000W CONVECTION COOLED SYSTEM COMPACK IN CHAMELEON SYSTEM

Eltek Grterudveien 8, PB 2340 Strms, 3003 Drammen, Norway Phone: +47 32 20 32 00 Eltek 2016 www.eltek.com
COMPACK CONTROLLER
FOR 12V, 24V, 30V, 48V & 60V SYSTEMS
ELECTRICAL SPECIFICATIONS
Input Voltage 9 - 75 VDC, shutdown < 8.5 VDC*
Temperature Range Nominal: -20 to +60 C (-4 to 140 F) Reduced accuracy: -40 to +70 C
Power Consumption 3W
MTBF > 550, 000 hours Telcordia SR-332 Issue I, method III (a) (Tambient : 25C)
Ethernet port 10/100 BASE-T HP Auto MDI/MDI-X
Relay Outputs (1,5 mm2) Form-C (dry contact NO-C-NC), Max 75V/2A/60W breaking capacity
Configurable Inputs (1,5 mm2) Temperature: External NTC, Digital: open/closed, Analog: 0-75V, Battery Symmetry: 0-75V

CONTROL FEATURES
Control System o Output Voltage Measurement o Output Voltage Measuremento Position
o Load Current Calculation (long/lat) for auto placement
o Energy Calculation o Generator start/stop control setup
o Load/Battery Disconnect o Test of Relay Outputs
o Real Time Clock with Battery Backup o Alarm grouping of events for relay outputs
o Stored Site Text/ID and Messages o Boolean AND of alarm groups
Battery o Battery Current Measurement o Temperature Compensated Charging
o Battery Temperature Measurement o Charge Current Limitation
Battery Testing o Battery Low Voltage Disconnect
(acc. to discharge table or set time limit) - Temperature dependent (optional)
o Setup of Battery Data/Table - Mains independent (optional)
o Battery Capacity Indication
o Battery Boost Charging
- Auto Ah discharge or voltage threshold
- Interval or Manual
Rectifier o Available information about each rectifier, o Energy calculation
e.g. serial number, version, internal o Efficiency Management
temperature o Emergency Voltage
o Individual Rectifier Current Measurement o Startup delay
o Individual Rectifier Input Voltage o Detailed internal alarms summary

ALARMS / EVENTS AVAILABLE

Alarms can be set up with monitoring of minor and major levels. Hysteresis and time delay is user configurable. All average and peak levels on
analogue values are auto logged.
Power & Control System o AC Mains Low (2-level) o Service mode (block relays), Generator running,
o AC Phase Voltage x3 (2-level) Lower charge current limit, Battery test, Boost
o Digital Inputs (programmable descriptions) Inhibit, Emergency low voltage , Clear manual
o Events trigger by inputs reset alarms.
Load o Load Disconnect
o Load Fuse
- Voltage or Timer (from mains failure) based
o Load Current
- Mains independent (optional)
Battery o Battery Voltage (4-level, optional 8-level) o Symmetry Failure (2-level)
o Battery Temperature (2-level) o Battery Quality after test (2-level)
o Battery Used Capacity (2-level) [Ah or %] o Battery Current (4-level)
o Battery Remaining Capacity (2-level) [Ah or %] o Battery Life Time (2-level) [from temperature
o Battery Fuse log]

Rectifier/Converter o Rectifier Failure (2-level)

o Rectifier Avg. Temperature (2-level)
o Rectifier Capacity (2-level)
o Rectifier Current Share (2-level)
o Rectifier Current (2-level)

DATA LOGGING
Control System Event log, Data log (configurable up to 20 monitors), Configuration Change log, Account Access log
Energy delivered from Rectifiers, Solar Charger and Battery, and consumed energy by the load for the
Energy
last 52 hours, 52 days and 52 weeks
Battery 10 last battery tests detailed, number of battery cycles for the last 52 hours, 52 days and 52 weeks
Generator Run time in minutes and fuel consumption for the last 52 hours, 52 days and 52 weeks

Model Compack Compack Interface Kit

Part number 242100.400 242100.900

Dimensions (HxWxD) 75 x 30 x 115mm / 2.95 x 1.2 x 4.52 107.6 x 41.4 x 175.5mm / 2.24 x 1.63 x 6.91
Weight 240g / 0.53 lbs 380g / 0.84 lbs
* 12V support from HW rev. HW1.3. HW version 1.0 1.2 input voltage range: 17 75 VDC

Doc 242100.400.DS3 v7 Specifications are subject to change without notice

Eltek Grterudveien 8, PB 2340 Strms, 3003 Drammen, Norway Phone: +47 32 20 32 00 Eltek 2016 www.eltek.com