User Manual: Excell Precision Co., LTD

EXCELL PRECISION CO., LTD.
USER MANUAL
Excell Precision Limited 2006. All rights reserved Worldwide.

The information contained herein is the property of Excell Precision Limited and is
supplied without liability for errors or omissions. No part may be reproduced or used
except as authorised by contract or other written permission. The copyright and the
foregoing restriction on reproduction and use extend to all media in which the
information may be embodied.
Counting ZSME200000003
Downloaded from www.Manualslib.com manuals search engine

TABLE OF CONTENTS
INSTRUCTIONS FOR USE.............................................................................................3

PREPARING TO USE THE SCALE................................................................................3
CHAPTER 1 PRODUCT INTRODUCTION .....................................................................4

1-1 DISPLAYS .........................................................................................................4
1-2 KEYBOARD FUNCTION ...................................................................................6
1-3 POWER SOURCES ...........................................................................................9
CHAPTER 2 OPERATION ............................................................................................10

2-1 SWITCH SCALE ON........................................................................................10
2-2 SWITCH SCALE OFF......................................................................................10
2-3 DISPLAY BACKLIGHT ....................................................................................10
2-4 SAMPLING SPEED & BACK TO ZERO SETTING .........................................11
2-5 AUTO CALIBRATION......................................................................................12
2-6 ZERO FUNCTION............................................................................................12
2-7 UNIT WEIGHT CALIBRATION ........................................................................13
2-8 COUNTING ......................................................................................................14
2-8-1 The Unit Weight of Object is Unknown..............................................14
2-8-2 The Unit Weight of Object is Known ..................................................14
2-9 DEDUCTION OF CONTAINER WEIGHT ........................................................15
2-9-1 The Weight of Container is Unknown ( Tare ) ...................................15
2-9-2 Clear Tare Value...................................................................................15
2-9-3 The Weight Container is Known (Pre-set Tare).................................16
2-9-4 Clear The Pretare Value.......................................................................17
2-10 TOTALISING .................................................................................................18
2-10-1 Quantity totalising .............................................................................18
2-10-2 Recall Quantity Totalised..................................................................19
2-10-3 Weight Totalising...............................................................................19
2-10-4 Recall Weight Total............................................................................19
2-10-5 Clear all Totalised Values .................................................................20
CHAPTER 3 USER INTERFACE SETTING .................................................................21

3-1 M+ KEY ACTION ........................................................................................21
3-2 PRE-SET TARE...............................................................................................21
3-3 PRE-SET QUANTITY CONDITIONS ...............................................................22
3-4 M+ OPERATION.........................................................................................22
3-5 M+ CONTINUOUS OPERATION (Only After Return to Zero)..................23
3-6 MULTIPLE UAGE KEY U.W.PST / (kg/lb) FUNCTION SELECTION...........23
3-7 BAUD RATE SETTING (for only with the serial interface) ..........................25
Counting 1 ZSME200000003

CHAPTER 4 KEYBOARD TYPES ................................................................................26

4-1 STANDARD TYPE...........................................................................................26
4-2 TYPE I DUAL WEIGHING UNIT..................................................................27
4-2-1 Unit Selection.......................................................................................27
4-2-2 Quantity Preset ....................................................................................27
4-2-3 Weight Preset .......................................................................................28
4-3 TYPE II UNIT WEIGHT PRESET ................................................................29
4-3-1 Unit Weight Preset Stores...................................................................29
4-3-2 Quantity Preset ....................................................................................30
4-3-3 Weight Preset .......................................................................................31
4-4 COMBINATION TYPE DUAL WEIGHING UNIT + UNIT WEIGHT PRESET
...............................................................................................................................32
4-4-1 Unit Selection.......................................................................................32
4-4-2 Unit Weight Preset Stores...................................................................33
4-4-3 Quantity Preset ....................................................................................34
4-4-4 Weight Preset .......................................................................................35
CHAPTER 5 INTERFACE.............................................................................................36
5-1 TOTALISING ...................................................................................................36
5-2 PRESET TARE OPERATION CONDITIONS...................................................37
5-3 QUANTITY PRESET OPERATION CONDITIONS ..........................................38
5-4 TOTALISING OPERATION CONDITIONS ......................................................39
5-5 THE CONDITION TO ALLOW THE NEXT TOTALISING OPERATION .........40
5-6 COMBINATION KEY OPERATION MODE......................................................41
5-7 BAUD RATE SETTING....................................................................................42
5-8 TRANSMIT MODE SELECTION......................................................................43

INSTRUCTIONS FOR USE
1) Please keep the scale in a cool and dry place. Do not store at high temperatures.
2) Please keep the scale clean and free from insect infestation.
3) Avoid objects impacting with the scale.
4) The load placed on the weigh pan must not exceed the maximum weighing capacity
of the scale.
5) If the scale is not going to be used for some time, please clean it and store it in a
plastic bag in dry conditions. A desiccant sachet may be included to prevent
moisture build up.
6) If the scale is not going to be used for some time, the internal rechargeable battery
should be recharged every three months. (If using dry batteries, take the dry
batteries out before storing)
7) Remove the plastic drip cover from the scale for best accuracy.
PREPARING TO USE THE SCALE

1. Locate the scale on a firm level surface free from vibrations for accurate weight
readings.
2. Adjust the four levelling feet to set the scale pan level using the spirit level bubble
located at the front of the scale.
3. Avoid operating the scale in direct sunlight or drafts of any kind.
4. If possible avoid connecting the scale to ac power outlet sockets which are adjacent
to other appliances to minimise the possibility of interference affecting the
performance of the scale.
5. Remove any weight that might be on the weigh pan before the scale is switched on
and avoid leaving weight on the pan for long periods of time.
6. Once the scale has been switched on, it will go through a LCD display test and then
re-zero to be ready for use.
7. The scale requires 15~20 minutes warm up before operation to ensure best
accuracy.
8. Please note when symbol appears on the screen, the internal battery needs
to be recharged.
9. All goods weighed should be placed in the centre of the weigh pan for accurate
weighing. The overall dimensions of the goods being weighed should not exceed
the dimension of the weigh pan.

CHAPTER 1 PRODUCT INTRODUCTION
1-1 DISPLAYS
WEIGHT .
UNIT WEIGHT QUANTITY
. .
0 3 . . .
. . . .
3 + 3
T
3 . . . . . Pcs 3 . . . . . stable 3 . . . . . .
DIGITAL DISPLAYS
1. WEIGHT: (5 digits)
Weight of objects on the weigh pan or totalised weight.
2. UNIT WEIGHT: (5 digits)

Unit weight of objects on the weigh pan or number of weighing in the totaliser.
3. QUANTITY: (6 digits)
Quantity (count) of objects on the weigh pan or total quantity in the totaliser.
SYMBOL ICONS 3
1. T or Net or Tare : Tare displays the deduction of the container weight
2. 0 or Zero : Zero indication
3. + or M+ : M+ Totaliser
4. Stable or ~ : Stable indication

.
: If the piece weight is smaller than Minimum Sampling

. .
5. . . .
. . . .
Weight, 3 will be displayed. In order to clear the

symbol 3, increase the size of the sample.
6. Pcs
: If the piece weight is smaller than Minimum Unit Weight,
3 will be displayed. The scale still weighs even though
the piece weight is too small, this may affect the count
accuracy.
7. : Low Power warning.
PERFORMANCE:
High Precision Counting Scale (1/15,000 and 1/ 30,000 Display Resolution)
Minimum Sampling Weight = at least 20d. Minimum Unit Weight = at least 0.2d
Standard Counting Scale (1/6,000 Display Resolution)
Minimum Sampling Weight = at least 40d. Minimum Unit Weight = at least 0.8d

(d=division)

1-2 KEYBOARD FUNCTION
STANDARD TYPE
QTY
7 8 9 SMPL
PST This is a CLEAR key
UNIT PST to delete all the High
4 5 6 W.T. CE Limit values. Please
refer to page 21.
1 2 3 Z M+
0 . CE T MC
ADDITIONAL FUNCTIONS TYPE I Dual Weighing Unit

QTY This Key is to select
7 8 9 SMPL
PST weight units of lbor
UNIT kg. Please refer
4 5 6 W.T.
lb/kg to page 21.
1 2 3 Z M+
0 . CE T MC
7 8 9
.
. .
R . . .
. . . .
This Key is to select

weight units in lbor
4 5 6 R
lb/kg kg. Please refer
to page 21.
.
1 2 3 0
. .
. . .
. . . . +
0 . CE T

ADDITIONAL FUNCTIONS TYPE II Unit Weight Preset
QTY
7 8 9 SMPL
PST This key selects 10 pre-set
stores of piece weight.
UNIT U.W.
4 5 6 W.T. PST
Please refer to page 24.
1 2 3 Z M+
0 . CE T MC
7 8 9
.
. .
R . . .
. . . . This key selects 10 pre-set
stores of piece weight.
U.W.
4 5 6 R
PST
Please refer to page 24.
1 2 3 0
. .
. . .
. . . . +
0 . CE T

COMBINATION TYPE Dual Weighing Units + Preset Piece
Weight Stores
QTY
7 8 9 SMPL
PST This is a dual function key
UNIT U.W. which selects:
4 5 6 W.T. PST Preset piece weight stores and
weighing units selection.
1 2 3 Z M+ Please refer to page 27.
0 . CE T MC
7 8 9
.
. .
R . . .
. . . .
This is a dual function key
which selects:
U.W.
4 5 6 R
PST
Preset piece weight stores and
weighing units selection.
.
1 2 3 0
. .
. . .
. . . .
+ Please refer to page 27.
0 . CE T

1-3 POWER SOURCES
Applicable Power Sources
1. AC 115V 10%
2. AC 230V 10%
3. 6V/1.2Ah Rechargeable battery
4. 6V/4Ah Rechargeable battery
5. 6V/10Ah Rechargeable battery
6. 9V DC via mains adapter
Power Consumption
Approximately DC 20 mA
Approximately DC 40 mA (With display Backlight)
Low Power Warning
When the symbol is displayed, it indicates that the scale needs to be

recharged or the dry batteries need to be replaced.
If the scale is not recharged after the low battery symbol is displayed, the scale will
switch itself off after 20-30 minuets.
4 Red light: Scale needs to be recharged.

Green light: Scale is recharged.

CHAPTER 2 OPERATION
2-1 SWITCH SCALE ON
To switch on the scale, ensure that the weigh pan is empty and press the ON/OFF
switch towards the ( | ) position and the scale will power on and set zero ready for
weighing or counting operations.
4 If the scale has a RS232 option fitted, the interface card number will be displayed
during the power up sequence.
2-2 SWITCH SCALE OFF

To switch the scale off, press the ON/OFF switch towards the ( ) position.
2-3 DISPLAY BACKLIGHT
AUTO BACKLIGHT
Press Z key, the unit weight displays followed by pressing 5
When the weight is over 10 divisions or any key is pressed, the display backlight
will be switched on. When the weight returns to zero or the weight on platform is
less than 10 divisions, the display backlight will switch off after 5 seconds.
BACKLIGHT ON
Press Z key, the unit weight displays followed by pressing 4
Backlight is on all the time.
BACKLIGHT OFF
Press Z key, the unit weight displays followed be pressing 6
Backlight is off.
4 The backlight mode is stored in memory and will restored when the scale is
switched off and back on again.

2-4 SAMPLING SPEED & BACK TO ZERO SETTING
Sampling speed: 01 ~ 15 (01 = slow, 15 = Very fast)

The slower the sampling speed the more accurate the count will be.
The faster the sampling speed the less accurate the count may be.
Zero display mask:

The standard auto zero tracking facility will normally ensure that the
zero remains stable despite fluctuations in temperature or ac mains
voltage etc. However in exceptional circumstances particularly mist
conditions & other unstable environments a useful additional facility
is available.
With the zero display mask it is possible to configure the scale not to
show the first division of the weight. When configured the weight
display will show zero as long as the weight is less than two display
divisions.
1= 1st division is displayed as zero

0= normal mode (1 st division is displayed)
Press Z key, the unit weight displays followed be pressing 8
Weight Unit Weight Quantity
XX
Sampling speed
Press 8 to increment (up) or 2
To decrement (down) the sampling speed
Zero display mask:
Press 4 to select 0 (normal mode) or
6 to select 1 (1 st division is displayed as zero)
Press QTY PST to exit and save the settings.

2-5 AUTO CALIBRATION

When the scale is at zero, press and hold . followed by pressing U.W.
PST until the weight display shows the scale capacity flashing, then release
the keys.
0 3
. .
Stable 3
Value of full capacity of the scale

Place weights on the scale equivalent to full load capacity. When the scale
is stable, it will calibrate automatically. While the scale is counting back to
zero, remove all the weights from the scale. The Calibration procedure is
finished.
4 If full load is not available in weights it is possible to enter a weight value of less
than full load. Enter the weight value to be used and then place the weight on
the scale, when the reading is stable the scale will automatically calibrate.
While the scale is counting back to zero, remove all the weights from the scale.
The Calibration procedure is finished. The new calibration will be stored and
recalled when the scale is switched off and on again.
Press CE key to exit from the calibration mode.
4 Restore to the default setting: When the Auto calibration is miss-operated, and
the scale should be restored to the default setting, please hold CE key and
press U.W. PST key, the default setting will be restored after the scale counting
back to zero.
2-6 ZERO FUNCTION

Press the Z key to re-zero the display with no load on the weigh pan. When the zero
is set correctly the 3 icon will be displayed adjacent to the (0) symbol on the
weight display.
The zero setting range is 2% of the capacity of the scale.

2-7 UNIT WEIGHT CALIBRATION

Two methods of unit weight calibration are available depending on the scale
configuration they are either:-
1. Auto Calibration if weight is over 10% of the last sampling value, the scale
will automatically re-calculate the unit weight.
Example:
Say the current unit weight is 2.5g. If the next batch of product of the same
type has a slightly different unit weight say 2.8g, then because the difference
between the to unit weights is greater than 10% the scale will average the two
values and set a new unit weight of 2.65g. If the difference in unit weights are
less than 10% then the unit weight is not re-calculated.
2. Manual Calibration Press SMPL key to determine the unit weight.
The Auto Unit Weight calibration is setting is a factory set option. If it is set to off
then the auto unit weight calculation is disabled.

2-8 COUNTING
The piece weight of the items to be weighed must be established before counting
operations are possible.
2-8-1 The Unit Weight of Object is Unknown
Place a sample quantity of items on the scale
.
Sampling Weight
Enter the number of items in the sample
.
Sampling Weight Number Entered
4 The quantity display will flash for about 3 seconds, whilst it is flashing press the
SMPL key to complete the sampling routine. Otherwise, the number entered and
displayed by the unit weight display will be used as the piece weight when the
display stops flashing.
When the quantity display is flashing, press the SMPL key.
.
Sampling Weight
Once the scale stabilizes, the count is shown on the quantity display.
. .
Stable 3
Sampling Weight Unit Weight Sampling Quantity entered
2-8-2 The Unit Weight of Object is Known
Enter the known weight of the item
0 3
. .
Stable 3
Unit Weight

Press the UNIT W.T. key, the count is shown on the quantity display.
0 3
. .
Stable 3
Unit Weight
The larger the sample weight is, the more accurate the count will be.
With both the Unit weight and Quantity displays showing zero, pressing either
the UNIT W.T. key or the SMPL key will recall the latest piece weight value.
2-9 DEDUCTION OF CONTAINER WEIGHT

2-9-1 The Weight of Container is Unknown ( Tare )
Place the container onto the scale.
.
Container Weight
Press T Key.
Once the scale stabilizes, it will display the net weight and the 3 icon next to
the NET symbol will be displayed.
0 3
.
T 3 Stable 3
2-9-2 Clear Tare Value

When the container is removed from the scale, the weight display will show a
negative sign. Press the T key again to clear tare value and the weight
display will reset to zero, the 3 icon adjacent to the NET symbol will go off.

2-9-3 The Weight Container is Known (Pre-set Tare)
The User mode function to operate the Pre-set tare is to set 0 The scale can
not perform a pre-set tare when there is a weight on the scale.
Nothing is placed on the scale.
0 3
.
Stable 3
Press T key.
0 3
.
Stable 3
Enter the weight value of the container.
0 3
.
Stable 3
Weight entered
Press T key.
.
T 3 Stable 3
The User mode function to operate the Pre-set tare is to set 1 The scale can
perform a pre-set tare when there is a weight on the scale.
An object is placed on the scale.
. .
Stable 3
Object Weight Unit Weight Object Quantity
Enter the weight value of the container
. .
Stable 3
Weight Entered
Press T key.
. .
T 3 Stable 3
Net weight deducting container Unit Weight Deducted container Q ty

2-9-4 Clear The Pretare Value
When the container is removed from the scale, the weight display will show a
negative sign. Press the T key to clear pre-tare value and the weight display
will reset to zero, the 3 icon adjacent to the NET symbol will go off.

2-10 TOTALISING
4 The totalising function can be used up to a maximum of 99 times before it must be
reset. The totalising display is limited to six digits maximum.
2-10-1 Quantity totalising

Place a desired object onto the scale
. .
Object Weight Unit Weight Object Qty Placed on Scale
Press M+ Key
Once the scale is stable.

M+ 3
.
Stable 3
Total Weight Totalised Total Number of Additions Total Quantity Totalised
After 3 seconds, the scale will return to the counting mode.

M+ 3
. .
Stable 3
Object Weight Unit Weight Object Qty Placed on Scale

2-10-2 Recall Quantity Totalised

With both the weight and the unit weight displaying zero, press M+ key to recall the
totalised value.
0 3 M+ 3
.
Stable 3
Total Weight Totalised Total Number of additions Total Quantity Totalised
2-10-3 Weight Totalising

With the unit weight display showing zero, place an object onto the scale.
.
Object Weight
Press M+ key.
Once the scale has stabilized.

M+ 3
.
Stable 3
Total Weight totalised Total Number of additions
After 3 seconds, the scale will return to the weighing mode.

M+ 3
.
Stable 3
Object Weight
2-10-4 Recall Weight Total

With both the weight and the unit weight displays showing zero, press M+ key to
recall the totalised values.
0 3 M+ 3
.
Stable 3
Total Weight Totalised Total Number of Additions

2-10-5 Clear all Totalised Values
Press the MC key to clear all of the totalised values and the 3 symbol adjacent to
the M+ icon on the overlay will switch off. The totals for weight, number of additions
and quantity are all cleared back to zero.
NOTE: All totals will be lost if the scale is switched off.

CHAPTER 3 USER INTERFACE SETTING
3-1 M+ KEY ACTION
Press Z then 1 twice.

Press 0 , 1 or 2 to select the required mode
0 = When M+ key is pressed, the display will show the totalised value. Then, the
scale will count back to zero after 3 seconds.
1 = When M+ key is pressed, the display will show the totalised value. Then, the
scale will count back to zero when the CE key is pressed.
2 = When M+ key is pressed, the beeper only will sound and the display won t
show the totalised value.
To exit and save the entry, press the key
3-2 PRE-SET TARE
Press Z then 1 followed by 2
Press 0 or 1 to select the required mode
0 = Pre-set Tare function is not available when there is an object on the scale.
1 = Pre-set Tare function is available when there is an object on the scale.

3-3 PRE-SET QUANTITY CONDITIONS
. X
0 = The quantity will be accepted by the scale only when the weight is stable.
1 = The quantity will be accepted by the scale even if the weight is un-stable.
3-4 M+ OPERATION
0 = M+ will be operate when the weight is stable.

1 = M+ will be operate even when the weight is un-stable.

3-5 M+ CONTINUOUS OPERATION (Only After

Return to Zero)
0 = After M+ operation, next M+ operation is allowed only after the scale Returns to
Zero.
1 = After M+ operation, next M+ operation is allowed immediately, without the scale
Returning to Zero.
3-6 MULTIPLE UAGE KEY U.W.PST / (kg/lb)

FUNCTION SELECTION
0 = Momentary press of the key operates the weighing units. (Major function)
Press and hold the key for 3 seconds operates the U.W.PST function. (Minor
function)
1 = Momentary press of the key operates the U.W.PST function. (Major function)
Press and hold the key 3 sec. is dual units selection. (Minus function)
Note: The nature of the operation of this function will depend on the configuration of

the scale.

3-7 BAUD RATE SETTING (for only with the serial

interface)
Press 0 ~ 3 to select the required baud
0 = 1200
1 = 2400
2 = 4800
3 = 9600
Transmit mode:
Press 0 ~ 3 to select the required mode
0 = Press M+ to transmit
1 = Continuous transmission
2 = Transmit only when weight is stable
3 = For EZ-2 printer

CHAPTER 4 KEYBOARD TYPES
4-1 STANDARD TYPE
4-1-1 Quantity Preset
The scale can store a Hi Limit quantity value. The scale will make a warning beep
and the unit weight window will display a blinking . if the quantity is
over the Hi limit alarm value set.
Set the Hi Limit alarm value for Quantity Preset

Method 1 :
Place the sample object onto the weigh pan and increase the number of
items gradually until the quantity reaches the desired Hi Limit alarm level.
Press QTY PST key to store this quantity preset alarm value.
Method 2 :
Enter directly the Hi Limit quantity number using the keypad, then press
the QTY PST key to store the value.
Clear the Hi Limit quantity value

To clear Hi Limit quantity value, press the PST CE key.

4-2 TYPE I DUAL WEIGHING UNIT
4-2-1 Unit Selection
Press lb / kg key to select the weighing units required lb or kg.
The scale will save the current units when it is switched off and restore them
when switched back on again.

Set the Hi Limit value for Quantity Preset
Press QTY PST key whether the scale has object on the weigh pan or not.
0 3
Stable 3
Latest Preset Value
Enter a desired Hi Limit value. Use CE key to correct the value entered.
0 3
Stable 3
Hi Limit Value Entered
Press SMPL key. Use CE key to correct the value entered.
0 3
Stable 3
Press QTY PST key and the scale will return to counting mode.
0 3
.
Stable 3

4-2-3 Weight Preset
The scale can store a Hi Limit unit weight value. The scale will make a warning
beep and the unit weight window will display a blinking
if the unit weight is over the Hi limit value stored.
Set the Hi Limit value for unit Weight
0 3
Stable 3
Latest Preset Value
0 3
Stable 3

4 The unit and the decimal points for the high limit value entered are the same as the value
previously preset on the weight display.
Press UNIT W.T. key. Use CE key to correct the value entered.
0 3
Stable 3
Press QTY PST key, the scale will return to counting mode.
0 3
.
Stable 3
Clear the Hi Limit unit weight and quantity values

To clear the Hi Limit unit weight or Quantity preset enter 0 as the value in the
appropriate entry field.

4-3 TYPE II UNIT WEIGHT PRESET
4-3-1 Unit Weight Preset Stores
The scale can store 10 sets of unit weight presets. The stores are accessed
using the number keys ( 0 ~ 9 ). Press the number key required and the
display will show the unit weight previously saved in that store.
Set Unit Weight Preset
Use the number 0 ~ 9 to enter the unit weight value.
0 3
.
Stable 3
Press U.W. PST key.
0 3
Stable 3
Press U.W. PST key.
0 3
Stable 3
Press any number 0 ~ 9 key to save the unit weight in its store.
0 3
.
Stable 3
Recall the Unit Weight Preset
Press U.W. PST key.
0 3
Stable 3
Press any number 0 ~ 9 key to recall the unit weight saved in its store.
0 3
.
Stable 3

Hi Limit Value for Quantity Preset
0 3
Stable 3
Latest Preset Value
0 3
Stable 3
0 3
Stable 3
0 3
.
Stable 3

4-3-3 Weight Preset
0 3
Stable 3
Latest Preset Value
0 3
Stable 3

Press UNIT W.T. key. Use CE to correct the value entered.
0 3
Stable 3
0 3
.
Stable 3


4-4 COMBINATION TYPE DUAL WEIGHING UNIT +
UNIT WEIGHT PRESET
QTY
7 8 9 SMPL
PST The combination key
UNIT U.W. has two functions:
4 5 6 W.T. PST Unit Weight and Unit Selection,
please refer to INTERFACE
1 2 3 Z M+ section 6 below.
0 . CE T MC
7 8 9
. .
R . . .
. . . .
The combination key

U.W. has two functions:
4 5 6 R
PST Unit Weight and Unit Selection,
please refer to INTERFACE
1 2 3 0
.
. .
. . .
. . . . + section 6 below.
0 . CE T
4-4-1 Unit Selection
Press the combination key.

(If the unit selection setting is a secondary function, press the combination key
for about 3 seconds and the display will show the following)
0 3
Stable 3
Use the number 1 or 2 key to select 1 or

2
Remarks : 1 First unit

2 Second unit
The scale will save the current unit in use. At power on the last units in use
will be used.

4-4-2 Unit Weight Preset Stores
The scale can store 10 sets of unit weight presets. The stores are accessed
using the number keys ( 0 ~ 9 ). Press the number key required and the
display will show the unit weight previously saved in that store.
Set Unit Weight Preset
Use the number 0 ~ 9 key to enter the unit weight value.

0 3
.
Stable 3

(If the unit weight preset setting is a secondary function, press the combination
key for about 3 seconds and the display will show the following)
0 3
Stable 3

0 3
Stable 3
Press any number 0 ~ 9 key to recall the unit weight saved in this key.
0 3
.
Stable 3
Recall the Unit Weight Preset

0 3
Stable 3
Press the number 0 ~ 9 key to recall the unit weight saved in this key.
0 3
.
Stable 3

Set the Hi Limit Value for Quantity Preset
0 3
Stable 3
Latest Preset Value
0 3
Stable 3
0 3
Stable 3
0 3
.
Stable 3

4-4-4 Weight Preset
0 3
Stable 3
Latest Preset Value
0 3
Stable 3
Press UNIT W.T. key. Use CE key to correct the value entered.
0 3
Stable 3
0 3
.
Stable 3


CHAPTER 5 INTERFACE
4 Function available for RS232 or PRINTER output, please refer to section 7 and 8
below.
5-1 TOTALISING
Press the Z key until the unit weight displays followed by
pressing key 1
WEIGHT UNIT WEIGHT QUANTITY
----- ------
Press the 1 key.

X
Use the number 0, 1 or 2 key to select 0, 1, or 2
0 Press M+ key and the window display will show the totalised value.
After 3 seconds, the scale will return to counting mode.
1 Press M+ key and the window display will show the totalised value.
Press CE key and the scale will return to counting mode.
2 Press M+ key and the display window will not show the totalised
value as the buzzer will beep.
Press the . key to exit the setting mode and the scale will return to counting mode.

5-2 PRESET TARE OPERATION CONDITIONS
Press the Z key until the unit weight displays then press 1
----- ------
Press the 2 key.

X
Use the number keys 0 or 1 key to select 0 or 1
0 Preset tare is not allowed if there is a weight on the scale.
1 Preset tare will operate at any point throughout the weighing range.

5-3 QUANTITY PRESET OPERATION CONDITIONS
----- ------
Press the 3 key.

. X
Use the number keys 0 or 1 to select 0 or 1
0 The QTY PST will only operate when the weight is stable.
1 The QTY PST will operate irrespective of the stability of the weight.

5-4 TOTALISING OPERATION CONDITIONS
----- ------
Press the 4 key.

X
0 Totalising will only be carried out when the weight is stable.
1 Totalising will be carried out irrespective of the stability of the weight.

5-5 THE CONDITION TO ALLOW THE NEXT
TOTALISING OPERATION
----- ------
Press the 5 key.

X
0 The weight needs to return to zero before the next totalising operation is
allowed.
1 Allow next totalising operation without return to zero interlock.

5-6 COMBINATION KEY OPERATION MODE
----- ------
Press the 6 key

X
0 Press the Unit Selection function key (main function) and hold it down for 3
seconds, the function of the key becomes Unit Weight Selection (secondary
function)
1 Press the Unit Weight Preset function key (main function) and hold it down
for 3 seconds, the unit selection function becomes the secondary function.

5-7 BAUD RATE SETTING
----- ------
Press the 7 key.

X
Use number keys 0 to 3 key to select
0 1200
1 2400
2 4800
3 9600
Once the setting is done, re-start the scale by turning the power off / on.

5-8 TRANSMIT MODE SELECTION
----- ------
Press the 8 key.

X
Use the number keys 0 to 3 to select
0 Press M+ key to transmit 2 Stable transmit

1 Stream transmit 3 EZ-2 printer only
Once the setting is done, re-start the scale by turning the power off / on.
4 The weight must be greater than a positive value to transmit the record
information.
4 Transmit mode data:
Press M+ key to transmit Stream transmit / Stable transmit

NO.
N/W
N/W
U/W
U/W
PCS
PCS
Press MC key to transmit ( clear the totalised data from memory )

===========
T/N
T/W
T/A

NO.No. of totalising operations

N/WNet Weight
U/WUnit Weight
PCSPiece
T/NTotal no. of totalising operations
T/WTotal Weight
T/ATotal Amount

User Manual: Excell Precision Co., LTD

Uploaded by

User Manual: Excell Precision Co., LTD

Uploaded by

EXCELL PRECISION CO., LTD.

Excell Precision Limited 2006. All rights reserved Worldwide.

Downloaded from www.Manualslib.com manuals search engine

INSTRUCTIONS FOR USE.............................................................................................3

CHAPTER 1 PRODUCT INTRODUCTION .....................................................................4

CHAPTER 2 OPERATION ............................................................................................10

CHAPTER 3 USER INTERFACE SETTING .................................................................21

Downloaded from www.Manualslib.com manuals search engine

CHAPTER 4 KEYBOARD TYPES ................................................................................26

Downloaded from www.Manualslib.com manuals search engine

PREPARING TO USE THE SCALE

Downloaded from www.Manualslib.com manuals search engine

2. UNIT WEIGHT: (5 digits)

2. 0 or Zero : Zero indication

4. Stable or ~ : Stable indication

: If the piece weight is smaller than Minimum Sampling

Weight, 3 will be displayed. In order to clear the

7. : Low Power warning.

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

ADDITIONAL FUNCTIONS TYPE I Dual Weighing Unit

This Key is to select

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Low Power Warning

When the symbol is displayed, it indicates that the scale needs to be

4 Red light: Scale needs to be recharged.

Downloaded from www.Manualslib.com manuals search engine

2-2 SWITCH SCALE OFF

2-3 DISPLAY BACKLIGHT

Downloaded from www.Manualslib.com manuals search engine

2-4 SAMPLING SPEED & BACK TO ZERO SETTING

Sampling speed: 01 ~ 15 (01 = slow, 15 = Very fast)

Zero display mask:

1= 1st division is displayed as zero

Press Z key, the unit weight displays followed be pressing 8

Weight Unit Weight Quantity

Press QTY PST to exit and save the settings.

Downloaded from www.Manualslib.com manuals search engine

2-5 AUTO CALIBRATION

Value of full capacity of the scale

Press CE key to exit from the calibration mode.

2-6 ZERO FUNCTION

The zero setting range is 2% of the capacity of the scale.

Downloaded from www.Manualslib.com manuals search engine

2-7 UNIT WEIGHT CALIBRATION

Downloaded from www.Manualslib.com manuals search engine

2-8-1 The Unit Weight of Object is Unknown

Place a sample quantity of items on the scale

Enter the number of items in the sample

2-8-2 The Unit Weight of Object is Known

Enter the known weight of the item

Downloaded from www.Manualslib.com manuals search engine

2-9 DEDUCTION OF CONTAINER WEIGHT

2-9-2 Clear Tare Value

Downloaded from www.Manualslib.com manuals search engine

Enter the weight value of the container.

Enter the weight value of the container

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

2-10-1 Quantity totalising

Once the scale is stable.

After 3 seconds, the scale will return to the counting mode.

Downloaded from www.Manualslib.com manuals search engine

2-10-2 Recall Quantity Totalised

2-10-3 Weight Totalising

Once the scale has stabilized.

After 3 seconds, the scale will return to the weighing mode.

2-10-4 Recall Weight Total

Downloaded from www.Manualslib.com manuals search engine

NOTE: All totals will be lost if the scale is switched off.

Downloaded from www.Manualslib.com manuals search engine

Press Z then 1 twice.

Press 0 , 1 or 2 to select the required mode

To exit and save the entry, press the key