ModellingSpace
Users Manual
Basic
1 Concepts
Basic
The basic concept, which is the base of the software, is the model. A model is a set of conditions that try
to be a representation of the real world. A model contains entities that are interconnected by relations.
An entity can have several properties; lets take the Sun and a plant for an example: we could model the
connection between the growth of the plant and the warmth by linking these properties together:
model of the growth of a plant
and the warmth of the sum
Another example could be: a model that predicts the position of a speeding car at any given time:
model of the position of a speeding
car at any given time
The entities here are the clock and the car. On this latest example the property time of the clock was
linked to the property position of the car.
Both examples are linked by what is called a relation. These relations can be of several types: semi-
quantitative, quantitative, qualitative or logical.
Once understood the basic concepts, one is ready to fully explore the world of Modelling Space
2
2 Entities
Basic
Entities are objects that can be dragged into the workspace.
An entity explained:
Entity number
Delete Entity Icon
Entity Name
Image
Current Value
Options Button
Lock / Unlock
property details in the format:
property name [min., current, max.] units
Property Slider
Show / Hide
Details
Every entity is identied by an Image and a unique Number. Double-click the Entity Name for
informations about the entity.
Entities usually have one or more properties. To add properties, click the Options Button and check
them on the menu that pops up.
clicking the Options Button
opens a popup menu
Property values can be changed by moving the Property Slider. By clicking the Lock icon, you lock the
property in its current value. Click again to unlock.
A small box, that can be hidden, show details about a property.
Optionally its possible to display a property Current Value over the Entity Image.
ModellingSpace stores entities in Libraries. You can modify entities with the Entity Manager.
To remove an entity from the model you must click the Delete Icon.
3
3 Relations
Basic
Relations link Entities properties together. There are ve groups of relations, each colour coded:
Qualitative
Qualitative with label
Semi-quantitative Proportional
Semi-quantitative Inverse Proportional
Semi-quantitative Constant
Semi-quantitative increases-decreases
Semi-quantitative increases-increase a lot
Graphic
Table
Quantitative
Qualitative relations make associations between object properties without quantifying them
Semi-quantitative relations express mathematical ideas while not using mathematical functions.
Quantitative relations are expressed by mathematical functions.
Graphic relations are set by drawing the graphic of the relation.
Table relations are set by lling the values on the relation table.
4
4 Libraries
Basic
Entities are organized in groups called Libraries.
show / hide manage libraries
button
manage entities of libraries
auto hide box
libraries options
library tab
library
manager
launch
library manager
The libraries tabs can be found in the right side of the screen. They contain all the libraries installed
in ModellingSpace.
Individual libraries can be shown / hidden by choosing them from the Libraries Options pull down.
The library bar (Palette) can be manually hidden (or shown) by clicking the Show / Hide button.
Optionally, it is possible to automatically hide or show the bar by checking the Auto Hide Box.
The Library Manager can be launched from the Administration Menu or from the Libraries Options
pull down.
5
Themes of Study
Basic
Themes of study are guides that contain specic activities for students
They are in HTML format and can be edited with any web editor.
To edit a Theme of Study trough ModellingSpace an external web editor must be properly
congured in ModellingSpace settings
When a Theme of Study is opened a web browser is launched to display the le
6
6 Starting ModellingSpace
Basic
Double click the icon on the desktop to launch ModellingSpace, or use the Start Menu.
Every user identies itself by entering an User name a Password.
username
password
click OK to proceed
There is an attempt to check the identity of the user by connecting to the ModellingSpace Server. If the
user is unknown or there is no server to validate the request the Login Error dialog is displayed:
Server identication is mandatory for collaborative work, if this is not the case the user can log in with
any user name and password and then select Work Off-line from the login Error dialog.
7
7 Main Window
Basic
Take a moment to familiarize yourself with the main window:
title bar tool bar
menu Bar
model window
libraries bar relations bar
The Menu Bar has the following components:
8
8 Model Window
Basic
Is in the model window here the models are created. To add an object to a model, you must drag it to
the model window.
minimize and maximize
model window
model name click to close
model window
scrollbars
right clicking over the model
window displays the options menu
insert notes
change background
select background image
reset background
to default
view model history
double click over a note to edit its text.
to move notes click and drag them to the desired place.
click the delete icon to delete notes.
When a model window is closed a conrmation dialog is displayed. Click Yes to save any changes to the
model. Clicking Cancel wil not close the model.
9
9 Libraries Bar
Basic
In the Libraries Bar there is a separate tab for each of the libraries. These tabs contain the entities of
the library.
Clicking on the library name brings its entities to top.
When moving the mouse over an entity, its name is displayed in the Entity Name area.
show / hide button
show library check box
auto hide
check box
options button
libraries tabs
launch
Library Manager
entity name
10
10 Relations Bar
Basic
The Relations Bar contains only one tab for all relations.
The relations are colour coded in ve groups. Its possible to show / hide these groups trough the
Relations Options menu.
When moving the mouse over a relation, a pop-up with its description is displayed and its name is
displayed in the Relation Name area.
auto hide
check box
show relation group
check box
show / hide button
options button
relations tab
relation name
and description
relations
relation name
11
11 Adding Entities
Basic
Entities are the base of any model. To add entities to the model you must drag and drop them in the
model window.
Place the mouse over the entity, click (withought releasing the mouse button) and drag it to the model
window, then drop the entity (release the mouse button) over the place where you desire the entity
12
12 Entities Properties
Basic
When dealing with semi-quantitative or quantitative models, one must dene the properties of the
entity.
To display the entity properties, move the mouse over the entity, so that the Options Button is visible,
then click it.
move the mouse over click the options button, a pop up checking the properties
p
the entity to display the with the entity properties options displays them below
b the
options button is displayed entity
Double clicking the property name displays the property settings dialog.
minimum, current,
maximum and initial values
step parameters
property description
double click the
property name
In this dialog you can:
set the minimum, current, maximum and initial values of the property.
set either the step value or the number of steps, the other value calculated based on the range of the
property.
add a description to the property.
It possible to change the current value by dragging the property slider and, to make that value
constant click the Lock Icon.
drag the property slider click to lock / unlock
13
13 Entities Options
Basic
Several settings can be made that affect the visual appearance of entities.
Double clicking over the entity name or its image opens the following dialog:
double click the
entity name or image
You can enter a new name for the entity and add a description to it.
By placing the cursor over the image limits it is possible to resize the entity.
To resize the entity place the cursor over the image boundaries. It changes to an arrow. Then click and
drag to enlarge or reduce the image.
place the cursor over click and drag to resize
the image boundaries
It is also possible to change the width of the of the property.
place the cursor over the click and drag to resize
property boundaries
14
14 Special Entities
Basic
ModellingSpace includes two kinds of special entities: concept entities and abstract entities.
Concept entities are used in qualitative models (concepts maps). Their main feature is the text editable
label. Clicking the options icon it possible to personalize the look and feel of the entity.
Concept entities can only be linked with qualitative relations.
1 drag a concept entity 3 clickthe options icon to
to the model window customize the entity appearence
2 double click it
to edit the label
Abstract entities are general purpose entities that visualy quantify a variation and are used when a
more specic entity isnt available in the libraries for that purpose.
1 drag an abstract entity
to the model window
2 double click to
customize
3 use the abstract
entity like any other
quantitative entity
15
15 Adding Relations
Basic
To add relations to the model you must drag and drop them in the model window.
Place the mouse over the relation, click (withought releasing the mouse button) and drag it to the model
window, then drop the relation (release the mouse button) over the place where you desire it.
place the cursor over the
relation, click and drag it to
the model window
drop the relation
where you desire it
Click on the property that you which to be the independent variable (the cause) and the click on the
property that you which for the dependent variable (the effect).
1 click on the 2 click on the 3 the result
independent variable dependent variable
If the entities have no properties set, it is possible to set them while linking the relation.
Note: With concept relations the links are placed over the entities Images.
16
16 Qualitative Relations
Basic
Qualitative relations are used to express the user ideas about models without the need to quantify
them.
In ModellingSpace there are two kinds of qualitative relations: one uses a text label
and the other dont .
Start by dragging and dropping the relation on the model window. Next, click over the entities you which
to link. When done click any where on the model window to stop linking.
1 drop the relation on the 2 click over the entities you 3 click any where on the
model window wish to link model window to stop
linking
In a text qualitative relation double click over the label to edit the text. Again, click any where on the
model window to stop typing. Press ENTER while editing to add new a line.
1 double click over the label 2 edit the text
To add a new link, move the cursor over the relation and click the icon. The cursor changes to
and it is now possible to link another entity.
To delete an already existing link, place the cursor over the link (which changes to green colour) and
click on it. Click again over the model window to delete it.
To delete the relation click on the icon. A conrmation dialog is displayed, click Yes.
click on the icon.
click Yes to delete the
relation
17
17 Proportional Relations
Basic
Proportional relations are used to express the semi-quantitative ideas about models without the need
to exactly quantify them.
In ModellingSpace there are three kinds of proportional relations, their use is similar.
Proportional Direct Proportional Inverse Proportional Constant
Start by dragging and dropping the relation on the model window.
Next, click on the property that you which to be the independent variable (the cause) and the click on
the property that you which for the dependent variable (the effect).
1 click on the 2 click on the 3 the result
independent variable dependent variable
Its possible to dene factors that affect the weight of the effect. Placing the mouse over the relation
displays the options icon and clicking it displays factors dialog:
Click OK when
nished editing.
Select the factors by moving the slider bellow the relation to the desired factor.
Its possible to alternate between an adding effect or an subtractive effect. Click the plus / minus
signal to toggle.
To delete the relation click on the delete icon . A conrmation dialog is displayed, click Yes.
click on the icon.
click Yes to delete the
relation
18
18 Graph Relation
Basic
Graph relations are used to draw the function between entities properties.
Start by dragging and dropping the relation on the model window.
Next, click on the property that you which to be the independent variable (the cause) and the click on
the property that you which for the dependent variable (the effect).
1 click on the 2 click on the
independent variable dependent variable
Placing the mouse over the relation displays the options icon and clicking it displays the graphical
relation dialog:
drawing area
clipboard actions
dependent variable
show / hide
graph values table
independent variable
On the drawing area the cursor changes to a pencil and you can draw the function. Click OK when
nished editing.
Its possible to alternate between an adding effect or an subtractive effect. Click the plus / minus
signal to toggle.
To delete the relation click on the delete icon . A conrmation dialog is displayed, click Yes.
19
19 Table Relation
Basic
Table relations are used to write values pairs between entities properties.
Start by dragging and dropping the relation on the model window. Next, click over the entities
properties that you which to link.
1 click on the 2 click on the
independent variable dependent variable
Click on the property that you which to be the independent variable (the cause) and the click on the
property that you which for the dependent variable (the effect).
Placing the mouse over the relation displays the options icon, , and clicking it displays the relation table
dialog:
Row actions
Value pairs
Clipboard actions
Show / Hide Graph
Click over the cells to enter values. Click OK when nished editing.
Its possible to alternate between an adding effect or an subtrative effect. Click the plus / minus
signal to toggle.
To delete the relation click on the delete icon . A conrmation dialog is displayed, click Yes.
20
20 Function Relation
Basic
Function relations are used to precisely quantify relations between entities properties.
Start by dragging and dropping the relation on the model window. Next, click over the entities
properties that you which to link.
1 click on the 2 click on the
independent variable dependent variable
3 click on the
constants
Click on the property that you which to be the independent variable (the cause) and then click on the
property that you which for the dependent variable (the effect).
After setting the effect, the link color changes to blue and now you can select other entities properties
that will be used as constants in the function relation.
Placing the mouse over the relation displays the options icon, , and clicking it displays the function
editor dialog:
Edit the equation as you need. Click OK when nished editing.
Its possible to alternate between an adding effect or an subtractive effect. Click the plus / minus
signal to toggle.
To delete the relation click on the delete icon . A conrmation dialog is displayed, click Yes.
21
Medium
1 Running the Model
Medium
The model can be run either from the toolbar buttons or from the model menu.
There are four buttons that control the way the mode is run.
Run the model
Stop the model
Advances the model step by step
When selected continuously cycles the
model
The play button has a dual use, besides running the model it also pauses it on the current position
when its running.
The stop button stops the simulation and resets the model to its initial state.
With the step button, its possible or advance the model step by step.
The loop button is a toggle button, when selected continuously cycles the model.
24
2 Opening and Saving Models
Medium
You can open models either clicking the open button from the tool bar or using the le menu Open
model... command.
In either case the user is presented with the Open model dialog so that it can choose the model to open.
To save a new model you can either use the le menu Save model or click the save button in the
tool bar. In either case the is displayed the Save model as dialog
While editing an existing model, clicking the save button immediately saves any changes made
on it.
To save an existing model with a different name use the le menu command Save model as and the
Save model as... is displayed.
25
3 Setting Graphs
Medium
Use the button graph from the toolbar to open a new graph window.
clear values
clear properties
values table
scatter graph
bar chart
axis
scale marks
hold current zoom controls
values
To setup the graph just drag the properties and drop them on the appropriate axis.
When the model is run, ModellingSpace calculates the values for the dependent properties and displays
them on the graph.
Note: All values exceeding the dened maximums will not be plotted.
26
4 Scatter Graphs
Medium
The scatter graph tab is default selected when the graph tool is opened.
Setup the graph by dragging and dropping entities properties in the axes.
Click the play button to run the model. ModellingSpace then plots the calculated values on the
graph.
If you need to change some parameters on the model compare two runs, click the hold button to
store the previous run. The new values will be plotted using a different color.
second run rst run
To change the position of the plot in the graph window, move the cursor over the yellow area until
it changes to and then click and drag to move the plot.
To change the scale of the axis, move the cursor over the axis until it changes to (for the
horizontal axis) or (for the vertical axis) and then click and drag to change the scale.
To plot more than one variable against the independent variable, just drag them to the vertical axis.
dependent variables
independent
variable
27
5 Bar Chart
Medium
Clicking the bar chart tab opens the bar chart view.
The bar char is a different representation of scatter plot in which its easier to quantify the importance of
the variables.
click to alternate between
vertical/horizontal bars
independent
variable
dependent
variables properties maximum
properties minimum
values
values
Clicking the button alternates between a horizontal and a vertical representation of the bars.
28
6 Values Table
Medium
Clicking the value table tab opens the Value Table view
The Value Table view displays the numeric values for each of the points calculated when the model is run.
values precision line difference column difference delete column
pull down
point number
columns for each
of the variables
For each point calculated there is a correspondent line of the table. The column labelled # stores the
n th point calculated for the model.
Besides the column # there is a column for each of the variables dened in the graph. See Setting
Graphs.
Its possible to display the table values from integers to four decimal places precision. You can
alter the precision of the values displayed by selecting it from the values precision pull down.
Click the line difference button to add a new column that contains the difference between the n th
point and its preceding from the last variable column.
Click the column difference button to add a new column which values are the difference of two other
columns. Select the existing columns from the dialog:
To remove a column from the table, rst, click in one of its cells to select it, and then, click the
delete column button to remove it.
29
7 Snapshot
Medium
With the purpose of writing documents (reports, themes of study, etc.) using images from ModellingSpace
models, it was implemented the snapshot function that allows users to save images of their models.
Click the snapshot button in the tool bar. It opens the following dialog:
zoom factor
controls
click OK
when done
image size
ModellingSpace automatically determines the image contents based on the objects (entities, relations)
present on the model.
You can alter the image size by changing the zoom factor.
Click OK when done. The Save image dialog is then displayed so that you can choose where is the image
to be stored.
30
8 Printing the model
Medium
ModellingSpace printing functions are available on the le menu.
page setup
print the model
Use page setup to dene how the model should be printed on the page.
printer options
printer source
paper margin
orientation controls
printer options
Select print (or press CTRL+P) to print the model.
click OK to print the
model
31
9 Collaborative Work
Medium
Collaborative sessions allow users to share, in real time, their works and ideas with other users anywhere
in the world through the Internet.
When ModellingSpace starts the login dialog is presented. You may choose not to login at this time and
start your work off-line. At any time you can login on the server by clicking on Login as... from the
Collaboration menu.
Users can perform synchron activities connecting to other partners computers or assynchron activies
using the ModellingSpace Server Repository.
In order to perform assynchron activities, you must rst log on ModellingSpace Server.
The server host address default is http://www.modellingspace.net. If necessary, it can be changed in
the program Options.
32
10 Finding Partners
Medium
To nd an on-line partner either use the command nd partner on the collaboration menu or click the
nd partner button of the tool bar. This opens the Select model dialog:
You can choose to create a new model or select one among the active models.
To create a new model check the top check box and click OK.
To use one of the active models, check the bottom check box, click on the name of that model and
then click OK.
on-line users loged in
ModellingSpace server
use / not use
the key
begin
collaboration
33
11 Partners from Server
Medium
When the ModellingSpace Server tab is selected, ModellingSpace connects to the server and fetches the
list of users registered on the server and the list of groups dened for the user.
For each remote user is displayed its name and status (on-line / off-line).
Status can be either on-line or off-line depending if the user is currently logged on the server or not.
To begin a collaborative session start by selecting the users. Click in select checkbox to select an user.
When all desired users are checked click the begin collaboration button.
You can remove users from the list unchecking the select checkbox near their names.
If you choose not to use a key for the session click the button use / not use key. See section Using the
Key for more on keys.
users list
check to select user
groups
refresh
groups list
use / not use
the key
begin collaboration
You must wait for all users to respond to your session request. Only then the collaboration session will
begin.
34
12 Using the Key
Medium
The key mechanism is a feature that when used on collaborative sessions allows only the current
owner of the key to make changes on the model.
When collaborating with several partners its important that some order is maintained because the
model cant be modifyed by everyone at the same time.
Not using the key, although its more practical, can lead to unexpected changes on the model due to
network latency.
On collaboration session that uses the key, only the key owner can modify the model.
If you have the key you can choose to pass it to another user by clicking the pass key button .
If another user has the key, you must issue a request for it by clicking the request key button
.
After a request is sent, you must wait for a reply.
You partner either accepts your request and you get the key,
or your partner refuses the request and keeps the key.
35
13 Collaboration Session
Medium
Partners asked to join in a session receive a accept screen:
caller identication
this session will use
the key
click Accept to join
session
key owner
request key
pass the key
open chat window
send model
disconnect from session
hide collaboration
controls
all chat messages
are displayed here
double click to
insert a dialog
opener.
click to send
message
click to hide
dialog opners
36
14 Using the Repository
Medium
The Repository is a virtual library which stores learning materials for the ModellingSpace community.
Users can download already existing materials or upload their own.
Click on the repository button to open the repository window
use this tab to
choose the type of
download les from
learning materials
the server
enter keywords click the search button
on the search box
click to download
selected results
select from the
search results
server messages
click to close the
repository window
use this tab to upload
your les to the server
browse for les to
upload
select the le type
click to upload
the le
37
15 ModellingSpace Community
Medium
The ModellingSpace server at implements the human networks infrastructures for the ModellingSpace
community.
Users can access de community by entering the link http://www.modellingspace.net/ on their browsers or
by clicking ModellingSpace Community on the Collaboration Menu which automaticaly launch the browser
and autmaticaly logs in the user.
ModellingSpace server
login page
user area
38
Advanced
1 Entities Management
Advanced
It is possible to create or modify existing entities with the Entity Manager.
The Entity Manager is started from ModellingSpace Administration menu which is available only to
teacher users.
open entity edit entity
edit property
new entity save
try entity
entity name
entity image
entity description
entity properties
edit property states
image
preview box
property states
browse for
images directory
entity states apply changes
40
2 Creating an Entity I
Advanced
Its needed, at least, to have one image ready (GIF or JPEG) to identify the new entity.
Note: All image editing tasks are done outside ModellingSpace environment, so an additional image
editing software may be required.
1 Select New from the Entity menu or click the button .
2 name the entity
3 click here to select the le that
contains the image for the entity
4 type a description for the entity
5 click here to add a new property.
entities for concept maps dont need
properties
6 ll the edit property dialog
7 click the Entity States tab or
the button
property name
property type dene the domain
allowed, either integer or real. description
value range
initial value
measure unit
number of unique states, for
each state it can be associated a
diferent image
41
3 Creating an Entity II
Advanced
If you have, or can produce, different images for each state follow these steps.
for each state there is a box with min and a max value of
the state. click the button to adjust the state values
1 click directory to select the folder that
contains the images for the states
2 select all the images
3 drag the images to the states boxes. boxes
are coloured when an image is associated.
4 save the entity. use the command Save...
from the Entity menu or click the button
export to le
create new library
placing the mouse over each state box
displays a popup with the image for that
state, the state range and number.
its very useful when working with more
than one property.
42
4 Library Management
Advanced
The Library Manager is launched from the Administration menu.
Use it to create, modify or delete entire libraries or to manage the entities of each library.
For each library it is possible to copy, move or delete its entities.
libraries tab
click to create a new library. enter the name for the new
library
click over the library you wich to delete. click the button and
conrm to delete
click over the library you wich to rename. enter the new
name for the library
import / export library to le
close library manager
clicking the copy button a
selected entity library is
copied to the other
entities tab
libraries pull down libraries pull down
copy entities between
libraries
move an entity to another
library
delete entity
close library manager
43
5 User Management
Advanced
User management is done on the ModellingSpace server.
Only Administrators are allowed to manage users.
If you want to become a ModellingSpace Administrator contact ModellingSpace Project Manager.
44
6 Program Settings
Advanced
Program settings are accessed from the Administration menu Options... command.
program options
use the same step value for all
properties or one value for each
click browse to select program and
les locations click the ags to select
prefered language
customise the dialog openers
used in chat sessions dene the server host address
check to use a proxy server proxy server conguration
45
7 Feedback Reports
Advanced
Users logged as teachers on the ModellingSpace server have the option to submit feedback reports o
inform the technical team of a problem with ModellingSpace.
Fields marked with a * are compulsory.
46
8 History Log
Advanced
The history log allows researchers to investigate the use the actions of the students by recording a log
of all actions performed in a model.
Open the History log with the Model menu command History. Use Open... to open an already existing
le or open the log of the current model.
click to refresh the log click to close the log window
47
9 Logfile Analysis
Advanced
The Activity Analysis tool allows researchers to track step-by-step the actions performed by students
on a model trough the analysis of the History le.
Launch Activity Analysis tool from the Administration menu or double click the icon .
Open the history le by clicking the browse button on the Analysis tab. Once the history le is loaded,
the researcher can playback all the events that appened during the construction of the model.
48
10 History Log
Advanced
The history log allows reseachers to investigate the use the actions of the students by recording a log of
all actions performed iin a model.
Open the History log with the Model menu command History. Use Open... to open an already existing
le or open the log of the current model.
49
Reference
1 Toolbar
Reference
new model window
open saved model
close model
save model
run model
stop model
advance model one step
continuously loop the model
open the graph tool
save a snapshot of the model
nd partners for collaborative sessions
open the repository window
display the help le
exit ModellingSpace
52
2 Menu Map
Reference
53
3 Log Actions
Reference
ids[1] = Chat message; ids[36] = Show/Hide property value;
ids[2] = Insert Entity; ids[37] = Change property value;
ids[3] = Insert Relationship; ids[38] = Change equation;
ids[4] = Insert Concept Relationship; ids[39] = Change factor;ids[40] = Change table;
ids[5] = Move/resize object; ids[41] = Change graph;
ids[6] = Delete object; ids[42] = Change Concept Relationship text;
ids[7] = Select property; ids[43] = Set the constant;
ids[8] = Deselect property; ids[44] = Add a constant;
ids[9] = Select all properties; ids[45] = Semi-quantitative Entity details;
ids[10] = Deselect all properties; ids[46] = Change Concept Entity text;
ids[11] = Correct cause; ids[47] = Variable Entity details;
ids[12] = Correct effect; ids[48] = Relationship details;
ids[13] = Concept link added; ids[49] = Insert sticky note;
ids[14] = Concept link removed; ids[50] = Change sticky note text;
ids[15] = Partner requested for the key; ids[51] = Change Relationship sign;
ids[16] = Partner passed the key; ids[52] = Property details;
ids[17] = Partner gave the key; ids[53] = Change global number of steps;
ids[18] = Partner refused the key; ids[54] = Display property value;
ids[19] = Run model; ids[55] = Display no property value;
ids[20] = Pause model; ids[56] = Concept Entity details;
ids[21] = Stop model; ids[57] = Qualitative Entity details;
ids[22] = Reset model; ids[58] = Insert simple text;
ids[23] = Run step by step; ids[59] = Change simple text;
ids[24] = Toggle loop mode; ids[60] = Clipboard data;
ids[25] = Cursor moved; ids[61] = Paste Entity;
ids[26] = Entity is known; ids[62] = Paste Relationship;
ids[27] = Entity missing from partner; ids[63] = Paste Concept Relationship;
ids[28] = New Entity meta-data; ids[64] = Paste sticky note;
ids[29] = New Entity icons; ids[65] = Paste simple text;
ids[30] = Request Entity icons; ids[66] = Logle data;
ids[31] = Set object to front; ids[67] = Open model;
ids[32] = Incoming model; ids[68] = Save model;
ids[33] = Send model meta-data; ids[69] = Wrong version;
ids[34] = New model received; ids[70] = Repository id notication;
ids[35] = (Un)lock property; ids[71] = Chat awareness;
54
4 Relations
Reference
55
