Software Testing

Fundamentals of software testing

Introduction:

This software testing eBook is helpful resource to understand software testing and quality
assurance concepts. We tried to make this eBook simple to understand with practical information
wherever possible.

This eBook covers almost all testing terminologies which are useful for preparing for software
testing job interview.

Besides this we have hundreds of articles covering everything from software testing industry.
You can read all these articles on: http://www.softwaretestinghelp.com/

Please feel free to share this eBook with your friends and help them understand the software
testing concepts.

Software development

Business Analyst Gathering Requirment BA----BRS

SRS/FRS

Project Planning Planning Project Plan

Project Archit
HLD
System Analyst Designing
LLD

Coding Source Code

Developers

Testing Testing Test > Execution

Delivery &Maintenance
Production Support Team To find defects & Reports
defects to developer

Errors: Any incorrect human action that produces a problem in the system is caller error.

Defect: Deviation between expected behavior to actual behavior of the system is called defect.

Failure: The deviation identified by end-user while using a system is called a failure.

For more software testing articles visit http://SoftwareTestingHelp.com

 Manual Testing

***Note :

Presence of errors results in defects and presence of defects results in failure of the product.

** When defects will arise while developing software?

Request 1 Request 2 Request 3 Request 4

Correct Requirement Correct Requirement Correct Requirement Incorrect Requirement

Designed as per Designed as per Mistakes made in Designed as per

requirement requirement design requirement

Developed as per Mistakes in Developed as per developed as per

design development design design

Product has coding Product has design

Correct Product Wrong product.
defects defects

* The above diagram explains the importance of early testing.

Early Testing: Conducting testing as soon as possible in development life cycle to find defects
at early stages is called early testing. Early testing is helpful to reduce the cost
of fixing defects.

* Why does software have defects?

* Incorrect requirements

* Wrong design

* Poor coding

* Complex business logic

* Complex technology

* Work pressure

* Frequently changing requirements.

Testing: it is a process of verifying are we developing the right product or not and also
validating does the developed product is right or not.

Software testing = Verification + Validation.

* What is Verification?

It is a process of verifying: Are we developing the right product or not. Known as static testing.

For more testing articles visit: http://SoftwareTestingHelp.com

 Manual Testing

* What is Validation?

It is a process of validating: Does the developed product is right or not. Also called as
dynamic testing.

Verification Vs Validation

Customer
1 Requirement Review req Acceptance Testing Deploy

System Build System

2 Requirement System

testing

3 HLD Integrate Integration Testing

4 LLD Build Units Unit Testing

Coding
5 Code Review.

***** 1,2,3,4,5, are verification and other side is validation.

Software Testing Techniques:

Static Testing

White Box Testing

Black Box Testing

Grey B ox Testing.
Levels of Dynamic Testing:

Acceptance

System

Integration

Component/ Unit
 Manual Testing

Validation

Testing Approach:

Traditional testing approach: Positive Testing (+ve).

Show that the system:

D o e s what it should

G o a l : show working.

S u c c e s s : system works.

E a s y to write system cases

R e s u l t : faults left in.

Better Testing Approach / -ve Testing:

Show that the system:

Doesnt do what it shouldnt.

Does what is should

Goal: find faults

Success: system faults

Difficult to write test cases.

Result: fever faults left in.

Most common defects

Incorrect functionality

Incorrect data edits

Poor performance

Poor security

Incompatibility

Poor UI User interface

Poor usability

For more testing articles visit: http://SoftwareTestingHelp.com

 Manual Testing

Objectives of Testing :

1) To confirm whether the application is developed according to customer requirements or

not

2) Finding defects

3) To make sure all problems are resolved and close.

4) Finally testing is helpful to deliver a quality product and risk-free product to the
customer.

Software testing Principles:

Principles of testing: Exhaustive principle is impossible.

Exhaustive Testing: If you test functionality with all possible valid inputs and invalid
inputs then it is called exhaustive testing.

*** Testing everything is called exhaustive testing.

Employee Registration
Customer requirement

Salary * *

It should accept a value between 5,000-50,000

If you check the salary field 5000 , 5001,5002 .50000 and 4999, 4998 etc is
called exhaustive As exhaustive testing is impossible risk based testing is preferred
(or) recommended..

Risk Based Testing: Identifying the operations which most likely to cause failures and then
testing these functionalities on priority basis is called risk based testing.

Defect Clustering: The small number of modules or functionality may contain more number of
defects. Concentrate more on testing these functionalities.

Pesticide Paradox: If prepared test cases are not finding defects, add/revise test cases to find
more defects.

The prepared test cases are not helping to find defects then add or modify
the test cases for better testing.
For more testing articles visit: http://SoftwareTestingHelp.com
 Manual Testing

Testing shows presence of defects:1 We have to test a application with an intension of

showing defects. For this negative testing is the best approach.

Early Testing: Testing should start as early as possible in the SDLC.

Testing is context dependent: We have to select or opt appropriate testing approach based
on the type of application we are testing.

Absence of Errors is a fallocy: Finding and fixing defects. 100% bug free app is impossible.

***** (Fallocy = False statement)

Static Testing: Verifying if we developing the right system or not is called static testing. It is
also called verification. T his static testing c o v e r s reviews and walk through.

Reviews : Examine any project related work or project related work is called reviews.

Types of Reviews:

1) Management Reviews

2) Technical Reviews

3) Code Reviews

4) Test case Reviews (formal, Informal)

Formal Reviews: if any review is conducted with a prior plan and by following proper
documentation and procedures are called formal reviews

Inspections and Audits are the best example of formal reviews.

Informal Reviews: if any review is conducted without following any procedures and
documentation then reviews

Walk-through: knowledge transfer sessions in the form of peer review

Objective of Reviews: Reviews are helpful to determine

1) Defects in requirement.

2) Defects in design.

3) Deviations in coding standards.

4) To confirm if the prepared test cases are enough to validate a software

5) Reviews helpful improve the organization process.

For more testing articles visit: http://SoftwareTestingHelp.com

 Manual Testing

Dynamic Testing: It is a process of checking if the source code and the application are
working as expected. Also called dynamic testing or validation testing.

* Levels of dynamic Testing: dynamic testing will be carried out at 4 levels.

1) Unit Testing

2) Integration Testing

3) System Testing

4) User Acceptance Testing.

Unit Testing: A smallest separatable portion in the source code of the application is called unit.
(functions, procedures, etc) Testing conducted on these units to check if the code behind the units
is working as expected or not is called unit testing.

It is also called module testing or component testing

Integration Testing: Once all units are tested the programmers will integrate all units and
check interactions among the units which is called integration testing.

Note: Unit testing and integration testing is collectively called white box testing.

White box Testing: Testing conducted on the source code by developers to check does the
source code is working as expected or not is called white box testing.

* What is the need of white box testing?

As the source code is visible, finding and rectifying the problems is easy for developers.

The defects that are identified in white box testing are very economical to

resolve. To reduce the defects as early as possible white box testing is helpful.

To ensure 100% code coverage.

***** White box testing is also called as glass box, structural, clear box testing.

Black box Testing: Testing is conducted on the application by test engineers or by domain
experts to check whether the application is working according to customer
requirements.

What is the need of Black Box Testing?

1) White box testing conducted by developer in a technical perception where as black box
testing is conducted by test engineers with end-user perception.

For more testing articles visit: http://SoftwareTestingHelp.com

 Manual Testing

2) Programmers will conduct white box testing in a positive perception whereas tester will
conduct black box testing with a negative perception where there is a more chance of
finding more defects

The more defects you identify results in a quality system.

3) White box testing will not cover non functional areas. As functional requirements are
also very important for production system those are covered in black box testing.

4) The objective of white box testing is 100% coverage whereas the objective of black box
testing is 100% customer business requirement coverage.

5) Black Box Testing = System Testing + User Accepting Testing which is called as
requirement Based Testing (or) Specification Based Testing.

System Testing: Validating the functional and non functional requirements of the system is
called system testing.

System testing broadly classified into two types i.e.

1) Functional system testing.

2) Non-functional system testing.

Functional system testing will be conducted both in a positive perception and also in a negative
perception.

Positive Testing (+ve ):Testing conducted on the application in a positive approach to

determine what system suppose to do is called positive testing.

***Note :

Positive testing is helpful to check whether the customer requirements are justifying b y
the application or not.

Negative Testing (-ve): Testing a software application with a negative perception to check
what system not supposed to do is called negative testing.

***Note :

Negative testing is helpful to find defects from the software.

Functional System Testing Approach: Smoke Testing:

It is a kind of quick test carried out on the application to determine whether the application is
testable or not.

Formal Testing: If you tested software application by following all preplan procedures and
proper documentation then it is called formal testing.

For more testing articles visit: http://SoftwareTestingHelp.com

 Manual Testing

Adhoc Testing: If you test software without following any procedures and documentation
then it is called adhoc-testing. It is also called informal testing.

Risk Based Testing (or) Priority Based Testing: Identifying the critical functionality in the
system and testing it first

Or

Conducting testing in the same order of priority is called risk based testing or priority based
testing.

Re- Testing: Testing functionality again or testing functionality repetitively is called re-
testing.

Re-testing comes in the following 2 scenarios.

1) Testing a functionality with multiple inputs to confirm i f the business validations

are implemented or not

2) Testing a functionality on the modified build to confirm the bug fixers are made correctly or
not.

Regression Testing: It is process of identifying various features in the modified build where
there is a chance of getting affected and retesting these features.

1) The new functionalities added to the existing system or modifications made to the
existing system or the bug fixes may introduce side-effects. R egression testing is
helpful to identify these side effects.

End to End Testing: Testing the overall functionalities of the system including the data
integration among all the modules is called end-to-end testing.

Exploratory Testing: Exploring the application and testing the functionalities

(or)

Understanding system, modifying existing test cases and executing those

Monkey Testing: Testing conducted on an application unevenly o r z i g zag way with an

intension of finding tricky defects is called monkey testing.

Non-Functional System Testing: Validating various non functional aspects of the system such
as user interfaces, user friendliness, security, compatibility, load, stress and performance etc is
called non-functional system testing.

Non Functional Testing

UI / GUI Testing: Validating if all user interfaces are professionally designed or not is
called UI Testing.

Check List for UI Testing:

For more testing articles visit: http://SoftwareTestingHelp.com

 Manual Testing

1) Check if all basic elements are available in the page or not.

2) Check spelling of the objects.

3) Check alignments of the objects.

4) Check content displayed in web pages.

5) Check if the mandatory fields are highlights or not.

6) Check consistency in background color, font type and fond size etc.

Usability Testing: Checking how easily the end user is able to understand and operate the
application

Security Testing: Validating whether all security conditions are properly implemented in the
software or not

Check List for Security Testing:

1) Check if the s e n s i t i v e d a t a s u c h a s password, credit card, CVV numbers

are getting encrypted or not.

2) Check browser navigation after logout

3) Check direct URL access for the both secured and non secured pages.

4) Check for session expiry

5) Check view source code option for secured pages.

6) Check for Authorization

7) Check for Authentication

8) Check cookies

Performance Testing: It is a process of measuring various efficiency characteristics of a

system such as response time, through put, load, stress transactions per minutes, transaction mix.

Load Testing: Analyzing functional and performance behavior of the application under
various load conditions is called load testing.

Stress Testing: Checking the application behavior under stress conditions is called stress testing
in other words reducing the system resources and keeping the load as constant checking how
application is behaving is called stress testing.

Recovery Testing: C hecking how s ystem is able to handle some unexpected or

unpredictable situations is called recovery testing.

Globalization Testing: checking if t he application having a provision of setting and changing

languages date and time format and currency etc. If it is designed for global users

For more testing articles visit: http://SoftwareTestingHelp.com

 Manual Testing

Localization Testing: checking default languages currency date and time format etc. If it is
designed for a particular locality of

Installation Testing: checking if we are able to install the software successfully or not as per
the guidelines given in installation document

Un-Installation Testing: checking if we are able to uninstall the software from the system
successfully or not

Compatibility Testing: checking if the application is compatible with t h e different software

and hardware environment

STLC

Project Manager/Team Manager Test Strategy

Project Leader Test Planning Test Plan

Test Engineer Test Analysis BRS / SRS / RCN

Test Engineer Test Design Test Scenarios

Test Cases /Test data.

Test Engineer Test the system (Exe Tcs )

Test Execution Find defects & Report data
Retest.
Project Manager/Team Manager
Project Leader Test closure Test Summary Reports

Test Planning: It is the first phase of system testing where the management plan the high level
and detail testing activities to be carried out.

Project manager or Test Manager will define test strategy and based on this test strategy the
detail plan called test plan is prepared.

Test Strategy: It is high level management plan and approach that provides sufficient
confidence on the project being tested.

Test Plan: It is detail day to day work plan that explains scope, approach resources and work
schedules etc. Test plan can be prepared by test lead.

For more testing articles visit: http://SoftwareTestingHelp.com

 Manual Testing

Test Plan Template:

1) Introduction

2) Scope

2.1) In Scope

2.2) Out of scope

3) Test Approach

4) Resources

5) Work Schedule

6) Entry Criteria & Exit Criteria

7) Test deliverables.

****Interview Question important****

Objectives of a Test Plan: a test plan document explains various procedures to be carried out
while testing a software. The main object to test plan is to determine:

1) Scope of Testing: what are the features to be tested and what are the features not to be
tested. Similarly what types of testing is applicable and what type of testing not
applicable.

2) Test Approach: various guidelines to be followed while designing test cases, test data
and defect codes etc.

3) Resources: Hardware, Software and human resources.

4) Work schedules and Test delivery.

Test Analysis: In this phase test engineer will study various project requirement documents
such as BRS, SRS to understand the project requirement.

While analyzing test requirements if there are any questions those will be recorded in
requirement clarification note, once analysis is finished you can get the clarification from
the domain experts.

BRS Template: A BRS document contains the following sections.

1) Client introduction
2) Project Introduction
3) Existing system
4) Drawbacks in the existing system
5) Proposed system
 Manual Testing

6) Project Architecture.
SRS / FRS : A typical SRS/FRS document will contain the following sections.
1) Overview
2) Prototype
3) Page elements
4) Use case diagram
5) Use case
Project Name : Primus Banking Reviewed By:
Module Name: Customer Reviewed Date:
Document: Reference Primus Banking-Admin-FRS-V1.0 Approved By:
Author: Ch.Damodar Approved Date:
Created date: 24/07/2011
Requirement
Specification Clarification Clarification Clarification Clarification
Reference Requirement Provided Provided By Provided Date
Services charges
Amount below Rs
FRS-PgNo-15- for Amount Below
1000/- is not Ch.Damodar 24/07/2011
Sec.No.3.2.1 balance 1000 is not
transferable
clear

RCN Template: (Requirement Clarification Note) :- is use to record your questions while
analyzing the project requirement.

In a meeting you discuss about your questions with a subject matter experts and you get a
clarification for the same.

Test Design: In this phase test engineer will prepare various documents such as test scenarios
test cases etc. which helps in testing a software application effectively.

Test Scenario: An item or a feature or a functionality to be tested in the application under test
is called test scenario.
 Manual Testing

Test Scenario of a Calculator Application

Scenario1: Check Addition

Scenario2: Check Subtraction

Scenario3: Check Multiplication

Scenario4: Check Division

Test Scenario of a Mobile Application

Scenario1: Check switch On /SwitchOff

Scenario2: Check Making a call

Scenario3: Check Receiving a call

Scenario4: Check sending sms

Scenario5: Check receiving sms

***Note :

Once the test scenarios are prepared, reviewed and approved based on these scenarios test
cases will be prepared.

Project Name : Primus Banking Reviewed By:

Module Name: Admin Reviewed Date:
Document: Reference Primus Banking-Admin-FRS-V1.0 Approved By:
Author: Ch.Damodar Approved Date:
Created date: 25/07/2011
Scenario ID Module Requirement Test Scenario
TS001 Admin R1.0 Primus Home Page Check Launching Application
TS002 Admin R1.0 Primus Home Page check Navigation of Home Page
TS003 Admin R1.0 Primus Home Page Check Admin Login
TS004 Admin R1.0 Primus Home Page Check Bank Employee Login
TS005 Admin R1.0 Primus Home Page Check Customer (individual, Corporate, NRI
TS006 Admin R2.0 Admin Home Page Check Navigation of Admin Home Page
TS007 Admin R2.0 Admin Home Page Check Change Password
TS008 Admin R3.0 Branches Check New Password creation
TS009 Admin R3.0 Branches Check Branch Modification
Check Branch search for different search
TS010 Admin R3.0 Branches criteria
TS011 Admin R3.0 Branches Check for Branch deletion.

For more testing articles visit: http://SoftwareTestingHelp.com

 Manual Testing

Test Case: A Test Case is set of preconditions steps to be followed with input data and
expected behavior to validate functionality a system.

In simple words a test case is brief description of what to test and how to test.

***Note :

In Industry practically we prepare only functionality test cases.

Three types of functional test cases:

1) Positive test cases 2) Negative test cases 3) Business validation test cases

Positive Test Case: A Test case prepared in a positive perception to check what a system
suppose to do is called positive test case.

Example:-

Tc1: Check Login with valid inputs.

Negative Test Case: A Test case prepared to check what a system not suppose to do is called
negative test case.

Example:-

Tc1: Check Login with invalid inputs.

Business Validation Test case: A test case prepared to check business conditions is called
business validation test cases.

Example:-

Check fund transfer with 1000, 10000, 15000, etc is called business validation test case.

****Interview Question important****

What is a good test case?

A test case that has high probability of catching defects is called a good test case.

Test case design techniques: Black box testing introduces the following techniques which
help in preparing effective test cases to validate system functionality:

1) Equivalence class partitioning (ECP)

2) Boundary value analysis (BVA)

3) Decision table

4) State transition testing

5) Usecase testing.

For more testing articles visit: http://SoftwareTestingHelp.com

 Manual Testing

Equivalence class partitioning (ECP): According to ECP at first identity all possible test cases
to validate functionality in the system. Then segregate these test cases into groups. While making
a group make sure that all test cases that belong to a group are producing the same out put
then select one test case from each group, preferably middle one for testing.

Example:

Enter a character

Submit

Valid Partitions Invalid Partitions

Lowercase Uppercase
Alphabets Numeric Spl chars Null >1 chars
Alphabets
TC1 a TC27 A TC53 0 * Blank a
TC2 b TC28 B TC54 1 - ab
TC3 c TC29 C TC55 2 & abc
TC4 d TC30 D TC56 3 % abcd
. . . @ .
. . . ^ .
. . . ( .
. . . ) abcdefg
. . . + .
. . . | .
TC24 x TC50 X . ! .
Tc25 y TC51 Y . ~ .
TC 26 z TC52 Z TC62 9 ` .

Boundary Value Analysis: It has observed that most of the times programmers are
committing mistakes while specifying the boundary conditions to determine these defects
BVA is helpful.

According to BVA once equivalence partitions are defined, identify the partition where there are
inputs with range. Determine outer boundary an inner boundaries for this range. For positive
negative testing consider lower boundary value minus one and upper boundary value plus one.

Decision table testing: Decision table testing is helpful to derive the test cases if functionality is
depending on multiple inputs.

For more testing articles visit: http://SoftwareTestingHelp.com

 Manual Testing

* SALES BILL*

Product Id:
Xxxxxxxxx
Xxxxxxxxx

Customer type

Quantity

Price

Bill
Inputs C1 C2 C3 C4 C5 C6 C7 C8
Customer Type yes Yes yes yes no no no no
Quantity yes No yes no yes no yes no
Price yes Yes no no yes yes no no
Expected
Result Error error error error error error error

For example:

User name

Password

Submit

As login depending on two inputs i.e., uid,pwd to check login we can cover a following test
cases

Inputs TC1 TC2 TC3 TC4

User Name yes Yes No no
Password yes No yes no
Submit yes Yes No no
Error Error Error

If functionality is depending on more number of inputs we can reduce the test cases based on
the application design

For more testing articles visit: http://SoftwareTestingHelp.com

 Manual Testing

State transition testing:

*) Every software will have various possible states. The state of the application changes
from one to another based on the user actions under input supplied.

*) State transition testing is helpful to derive and prepare test cases in order to cover all possible
states of the application.

Usecase testing: Validating software to confirm whether it is develop as per the use cases or
not is called user case testing.

Requirement traceability Matrix (RTM): Mapping between test cases and requirements is
called traceability mapping.

Advantages of traceability Matrix:

*) To determine the percentage of test coverage.

*) To identify a group of test cases belongs to a requirement which helps in modify build testing
and also implementing the change request easily

If card invalid Eat

Error Card
Msg
Insert
Card Incorrect pin

If card valid

Enter pin Invalid pin

st
Ast for 1 try 2nd try 3rd try
Pin

Pin ok Valid pin ok Pin ok

Access
to A/c

State Transition Testing

Defect Reporting: once a defect is identified we have to document the defect & report the
same to developer

Severity - Stops the system execution.

Runtime error

Showstopper Severity - Stops the system execution.

For more testing articles visit: http://SoftwareTestingHelp.com

 Manual Testing

Runtime error

Showstopper High severity

Once function

Its not working High severity

Cosmetic

Bugs Low severity

Font, Colors

Test, etc.

Defect Age: The time gap between date of detection & date of closure I known as the defect
age

Defect Severity: How serious the problem in the system or the impact of the problem in the
system is called defect severity.

Very high - fatal-S0

High - Major-S1

Medium - Minor-S2

Low Low-S3

Showstopper defect: A defect which is not permitting to continue further test is called
shostopper defect.

Defect Priority: The order in which the defect is to be resolved is called defect priority.

***Note :

*) Defect severity may be specified by the tester & defect priority will be assigned by manager

*) In general defect severity and prioritys proposition to each other but in some situation
that may vary.

*) An example of a defect that takes low severity and high priority.

- Incorrect company logo and incorrect company title.

*) An example for a defect that takes high severity and low priority - A serious problem belongs
to inter release module.

For more testing articles visit: http://SoftwareTestingHelp.com

 Manual Testing

Defect Age: The time interval between date of detection and date of closure is called is defect
age.

*) In other words how long a bug is present in the development life cycle is called defect age.

New

Tester Closed

Re-open

Rejected Open

Developer fixed

duplicate Hold different

Test Closure: It is the last phase of SDLC where the management prepares various test
summary reports that explains the complete statistics of the project.

Common Repository: Work Product:

A centralized computer system where you stored and mange all project resources is called
common repository.

Configuration Management: Maintaining all project resources in a centralized system,

maintaining appropriate version controlling based on the changes made to them is called
configuration management.

Software Configuration Tools:

*) VSS (Visual Source Safe)

*) CVS (Concurrent Version System (open source))

***Note:

*) Quality center test management tools also provide configuration management services.

For more testing articles visit: http://SoftwareTestingHelp.com

 Manual Testing

SDLC

Sequential Iterative

Models Models

WaterfallModel RAD Rapid Appl. development

PROTOTYPE

V Model Spiral Model

Azile Model

A SDLC model explains how development carried out in project implementation.

Sequential Models: These models are best suitable for small size of applications where
all development activities are carried out in a sequential order for the entire project.

Iterative Models: These models are best suitable for big projects in which a big project will be
divided into modules then the application will be implemented module by module.

Waterfall Model: It is a beginning approach of development model where all development

activities are carried out one after another for the entire project.

*) In this approach tester conduct testing after coding i.e. only validation.

*) As flow of all activities look like a waterfall is called waterfall model.

For more testing articles visit: http://SoftwareTestingHelp.com

 Manual Testing

Customer Requiements

System Requirement

High Level Design

Low Level Designing

Coding

Testing
Waterfall Model
Deployment

Prepared By:
Chindam Damodar
chdamu2002@gmail.com

Published by: http://SoftwareTestingHelp.com

For software testing career advice, jobs, automation testing guide, testing
templates and latest news please visit: http://Softwaretestinghelp.com

Thanks,
Vijay